freebsd-skq/sys/contrib/octeon-sdk/cvmx-mio-defs.h

/***********************license start***************
 * Copyright (c) 2003-2012  Cavium Inc. (support@cavium.com). All rights
 * reserved.
 *
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *
 *   * Redistributions in binary form must reproduce the above
 *     copyright notice, this list of conditions and the following
 *     disclaimer in the documentation and/or other materials provided
 *     with the distribution.

 *   * Neither the name of Cavium Inc. nor the names of
 *     its contributors may be used to endorse or promote products
 *     derived from this software without specific prior written
 *     permission.

 * This Software, including technical data, may be subject to U.S. export  control
 * laws, including the U.S. Export Administration Act and its  associated
 * regulations, and may be subject to export or import  regulations in other
 * countries.

 * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
 * AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
 * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
 * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
 * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
 * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
 * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
 * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
 * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
 * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
 ***********************license end**************************************/


/**
 * cvmx-mio-defs.h
 *
 * Configuration and status register (CSR) type definitions for
 * Octeon mio.
 *
 * This file is auto generated. Do not edit.
 *
 * <hr>$Revision$<hr>
 *
 */
#ifndef __CVMX_MIO_DEFS_H__
#define __CVMX_MIO_DEFS_H__

#define CVMX_MIO_BOOT_BIST_STAT (CVMX_ADD_IO_SEG(0x00011800000000F8ull))
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_BOOT_COMP CVMX_MIO_BOOT_COMP_FUNC()
static inline uint64_t CVMX_MIO_BOOT_COMP_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN50XX) || OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_BOOT_COMP not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x00011800000000B8ull);
}
#else
#define CVMX_MIO_BOOT_COMP (CVMX_ADD_IO_SEG(0x00011800000000B8ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_BOOT_DMA_CFGX(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 2))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_BOOT_DMA_CFGX(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000100ull) + ((offset) & 3) * 8;
}
#else
#define CVMX_MIO_BOOT_DMA_CFGX(offset) (CVMX_ADD_IO_SEG(0x0001180000000100ull) + ((offset) & 3) * 8)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_BOOT_DMA_INTX(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 2))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_BOOT_DMA_INTX(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000138ull) + ((offset) & 3) * 8;
}
#else
#define CVMX_MIO_BOOT_DMA_INTX(offset) (CVMX_ADD_IO_SEG(0x0001180000000138ull) + ((offset) & 3) * 8)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_BOOT_DMA_INT_ENX(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 2))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_BOOT_DMA_INT_ENX(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000150ull) + ((offset) & 3) * 8;
}
#else
#define CVMX_MIO_BOOT_DMA_INT_ENX(offset) (CVMX_ADD_IO_SEG(0x0001180000000150ull) + ((offset) & 3) * 8)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_BOOT_DMA_TIMX(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 2))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_BOOT_DMA_TIMX(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000120ull) + ((offset) & 3) * 8;
}
#else
#define CVMX_MIO_BOOT_DMA_TIMX(offset) (CVMX_ADD_IO_SEG(0x0001180000000120ull) + ((offset) & 3) * 8)
#endif
#define CVMX_MIO_BOOT_ERR (CVMX_ADD_IO_SEG(0x00011800000000A0ull))
#define CVMX_MIO_BOOT_INT (CVMX_ADD_IO_SEG(0x00011800000000A8ull))
#define CVMX_MIO_BOOT_LOC_ADR (CVMX_ADD_IO_SEG(0x0001180000000090ull))
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_BOOT_LOC_CFGX(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_BOOT_LOC_CFGX(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000080ull) + ((offset) & 1) * 8;
}
#else
#define CVMX_MIO_BOOT_LOC_CFGX(offset) (CVMX_ADD_IO_SEG(0x0001180000000080ull) + ((offset) & 1) * 8)
#endif
#define CVMX_MIO_BOOT_LOC_DAT (CVMX_ADD_IO_SEG(0x0001180000000098ull))
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_BOOT_PIN_DEFS CVMX_MIO_BOOT_PIN_DEFS_FUNC()
static inline uint64_t CVMX_MIO_BOOT_PIN_DEFS_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_BOOT_PIN_DEFS not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x00011800000000C0ull);
}
#else
#define CVMX_MIO_BOOT_PIN_DEFS (CVMX_ADD_IO_SEG(0x00011800000000C0ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_BOOT_REG_CFGX(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 7)))))
		cvmx_warn("CVMX_MIO_BOOT_REG_CFGX(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000000ull) + ((offset) & 7) * 8;
}
#else
#define CVMX_MIO_BOOT_REG_CFGX(offset) (CVMX_ADD_IO_SEG(0x0001180000000000ull) + ((offset) & 7) * 8)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_BOOT_REG_TIMX(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 7))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 7)))))
		cvmx_warn("CVMX_MIO_BOOT_REG_TIMX(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000040ull) + ((offset) & 7) * 8;
}
#else
#define CVMX_MIO_BOOT_REG_TIMX(offset) (CVMX_ADD_IO_SEG(0x0001180000000040ull) + ((offset) & 7) * 8)
#endif
#define CVMX_MIO_BOOT_THR (CVMX_ADD_IO_SEG(0x00011800000000B0ull))
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_BUF_DAT CVMX_MIO_EMM_BUF_DAT_FUNC()
static inline uint64_t CVMX_MIO_EMM_BUF_DAT_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_BUF_DAT not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x00011800000020E8ull);
}
#else
#define CVMX_MIO_EMM_BUF_DAT (CVMX_ADD_IO_SEG(0x00011800000020E8ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_BUF_IDX CVMX_MIO_EMM_BUF_IDX_FUNC()
static inline uint64_t CVMX_MIO_EMM_BUF_IDX_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_BUF_IDX not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x00011800000020E0ull);
}
#else
#define CVMX_MIO_EMM_BUF_IDX (CVMX_ADD_IO_SEG(0x00011800000020E0ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_CFG CVMX_MIO_EMM_CFG_FUNC()
static inline uint64_t CVMX_MIO_EMM_CFG_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_CFG not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000002000ull);
}
#else
#define CVMX_MIO_EMM_CFG (CVMX_ADD_IO_SEG(0x0001180000002000ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_CMD CVMX_MIO_EMM_CMD_FUNC()
static inline uint64_t CVMX_MIO_EMM_CMD_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_CMD not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000002058ull);
}
#else
#define CVMX_MIO_EMM_CMD (CVMX_ADD_IO_SEG(0x0001180000002058ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_DMA CVMX_MIO_EMM_DMA_FUNC()
static inline uint64_t CVMX_MIO_EMM_DMA_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_DMA not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000002050ull);
}
#else
#define CVMX_MIO_EMM_DMA (CVMX_ADD_IO_SEG(0x0001180000002050ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_INT CVMX_MIO_EMM_INT_FUNC()
static inline uint64_t CVMX_MIO_EMM_INT_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_INT not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000002078ull);
}
#else
#define CVMX_MIO_EMM_INT (CVMX_ADD_IO_SEG(0x0001180000002078ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_INT_EN CVMX_MIO_EMM_INT_EN_FUNC()
static inline uint64_t CVMX_MIO_EMM_INT_EN_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_INT_EN not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000002080ull);
}
#else
#define CVMX_MIO_EMM_INT_EN (CVMX_ADD_IO_SEG(0x0001180000002080ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_EMM_MODEX(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 3))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 3)))))
		cvmx_warn("CVMX_MIO_EMM_MODEX(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000002008ull) + ((offset) & 3) * 8;
}
#else
#define CVMX_MIO_EMM_MODEX(offset) (CVMX_ADD_IO_SEG(0x0001180000002008ull) + ((offset) & 3) * 8)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_RCA CVMX_MIO_EMM_RCA_FUNC()
static inline uint64_t CVMX_MIO_EMM_RCA_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_RCA not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x00011800000020A0ull);
}
#else
#define CVMX_MIO_EMM_RCA (CVMX_ADD_IO_SEG(0x00011800000020A0ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_RSP_HI CVMX_MIO_EMM_RSP_HI_FUNC()
static inline uint64_t CVMX_MIO_EMM_RSP_HI_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_RSP_HI not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000002070ull);
}
#else
#define CVMX_MIO_EMM_RSP_HI (CVMX_ADD_IO_SEG(0x0001180000002070ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_RSP_LO CVMX_MIO_EMM_RSP_LO_FUNC()
static inline uint64_t CVMX_MIO_EMM_RSP_LO_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_RSP_LO not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000002068ull);
}
#else
#define CVMX_MIO_EMM_RSP_LO (CVMX_ADD_IO_SEG(0x0001180000002068ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_RSP_STS CVMX_MIO_EMM_RSP_STS_FUNC()
static inline uint64_t CVMX_MIO_EMM_RSP_STS_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_RSP_STS not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000002060ull);
}
#else
#define CVMX_MIO_EMM_RSP_STS (CVMX_ADD_IO_SEG(0x0001180000002060ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_SAMPLE CVMX_MIO_EMM_SAMPLE_FUNC()
static inline uint64_t CVMX_MIO_EMM_SAMPLE_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_SAMPLE not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000002090ull);
}
#else
#define CVMX_MIO_EMM_SAMPLE (CVMX_ADD_IO_SEG(0x0001180000002090ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_STS_MASK CVMX_MIO_EMM_STS_MASK_FUNC()
static inline uint64_t CVMX_MIO_EMM_STS_MASK_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_STS_MASK not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000002098ull);
}
#else
#define CVMX_MIO_EMM_STS_MASK (CVMX_ADD_IO_SEG(0x0001180000002098ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_SWITCH CVMX_MIO_EMM_SWITCH_FUNC()
static inline uint64_t CVMX_MIO_EMM_SWITCH_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_SWITCH not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000002048ull);
}
#else
#define CVMX_MIO_EMM_SWITCH (CVMX_ADD_IO_SEG(0x0001180000002048ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_EMM_WDOG CVMX_MIO_EMM_WDOG_FUNC()
static inline uint64_t CVMX_MIO_EMM_WDOG_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_EMM_WDOG not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000002088ull);
}
#else
#define CVMX_MIO_EMM_WDOG (CVMX_ADD_IO_SEG(0x0001180000002088ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_FUS_BNK_DATX(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 3))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 3))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 3))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 3))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_FUS_BNK_DATX(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000001520ull) + ((offset) & 3) * 8;
}
#else
#define CVMX_MIO_FUS_BNK_DATX(offset) (CVMX_ADD_IO_SEG(0x0001180000001520ull) + ((offset) & 3) * 8)
#endif
#define CVMX_MIO_FUS_DAT0 (CVMX_ADD_IO_SEG(0x0001180000001400ull))
#define CVMX_MIO_FUS_DAT1 (CVMX_ADD_IO_SEG(0x0001180000001408ull))
#define CVMX_MIO_FUS_DAT2 (CVMX_ADD_IO_SEG(0x0001180000001410ull))
#define CVMX_MIO_FUS_DAT3 (CVMX_ADD_IO_SEG(0x0001180000001418ull))
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_FUS_EMA CVMX_MIO_FUS_EMA_FUNC()
static inline uint64_t CVMX_MIO_FUS_EMA_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_FUS_EMA not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001550ull);
}
#else
#define CVMX_MIO_FUS_EMA (CVMX_ADD_IO_SEG(0x0001180000001550ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_FUS_PDF CVMX_MIO_FUS_PDF_FUNC()
static inline uint64_t CVMX_MIO_FUS_PDF_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_FUS_PDF not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001420ull);
}
#else
#define CVMX_MIO_FUS_PDF (CVMX_ADD_IO_SEG(0x0001180000001420ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_FUS_PLL CVMX_MIO_FUS_PLL_FUNC()
static inline uint64_t CVMX_MIO_FUS_PLL_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_FUS_PLL not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001580ull);
}
#else
#define CVMX_MIO_FUS_PLL (CVMX_ADD_IO_SEG(0x0001180000001580ull))
#endif
#define CVMX_MIO_FUS_PROG (CVMX_ADD_IO_SEG(0x0001180000001510ull))
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_FUS_PROG_TIMES CVMX_MIO_FUS_PROG_TIMES_FUNC()
static inline uint64_t CVMX_MIO_FUS_PROG_TIMES_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_FUS_PROG_TIMES not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001518ull);
}
#else
#define CVMX_MIO_FUS_PROG_TIMES (CVMX_ADD_IO_SEG(0x0001180000001518ull))
#endif
#define CVMX_MIO_FUS_RCMD (CVMX_ADD_IO_SEG(0x0001180000001500ull))
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_FUS_READ_TIMES CVMX_MIO_FUS_READ_TIMES_FUNC()
static inline uint64_t CVMX_MIO_FUS_READ_TIMES_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_FUS_READ_TIMES not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001570ull);
}
#else
#define CVMX_MIO_FUS_READ_TIMES (CVMX_ADD_IO_SEG(0x0001180000001570ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_FUS_REPAIR_RES0 CVMX_MIO_FUS_REPAIR_RES0_FUNC()
static inline uint64_t CVMX_MIO_FUS_REPAIR_RES0_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_FUS_REPAIR_RES0 not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001558ull);
}
#else
#define CVMX_MIO_FUS_REPAIR_RES0 (CVMX_ADD_IO_SEG(0x0001180000001558ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_FUS_REPAIR_RES1 CVMX_MIO_FUS_REPAIR_RES1_FUNC()
static inline uint64_t CVMX_MIO_FUS_REPAIR_RES1_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_FUS_REPAIR_RES1 not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001560ull);
}
#else
#define CVMX_MIO_FUS_REPAIR_RES1 (CVMX_ADD_IO_SEG(0x0001180000001560ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_FUS_REPAIR_RES2 CVMX_MIO_FUS_REPAIR_RES2_FUNC()
static inline uint64_t CVMX_MIO_FUS_REPAIR_RES2_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_FUS_REPAIR_RES2 not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001568ull);
}
#else
#define CVMX_MIO_FUS_REPAIR_RES2 (CVMX_ADD_IO_SEG(0x0001180000001568ull))
#endif
#define CVMX_MIO_FUS_SPR_REPAIR_RES (CVMX_ADD_IO_SEG(0x0001180000001548ull))
#define CVMX_MIO_FUS_SPR_REPAIR_SUM (CVMX_ADD_IO_SEG(0x0001180000001540ull))
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_FUS_TGG CVMX_MIO_FUS_TGG_FUNC()
static inline uint64_t CVMX_MIO_FUS_TGG_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_FUS_TGG not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001428ull);
}
#else
#define CVMX_MIO_FUS_TGG (CVMX_ADD_IO_SEG(0x0001180000001428ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_FUS_UNLOCK CVMX_MIO_FUS_UNLOCK_FUNC()
static inline uint64_t CVMX_MIO_FUS_UNLOCK_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN30XX) || OCTEON_IS_MODEL(OCTEON_CN31XX)))
		cvmx_warn("CVMX_MIO_FUS_UNLOCK not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001578ull);
}
#else
#define CVMX_MIO_FUS_UNLOCK (CVMX_ADD_IO_SEG(0x0001180000001578ull))
#endif
#define CVMX_MIO_FUS_WADR (CVMX_ADD_IO_SEG(0x0001180000001508ull))
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_GPIO_COMP CVMX_MIO_GPIO_COMP_FUNC()
static inline uint64_t CVMX_MIO_GPIO_COMP_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_GPIO_COMP not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x00011800000000C8ull);
}
#else
#define CVMX_MIO_GPIO_COMP (CVMX_ADD_IO_SEG(0x00011800000000C8ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_NDF_DMA_CFG CVMX_MIO_NDF_DMA_CFG_FUNC()
static inline uint64_t CVMX_MIO_NDF_DMA_CFG_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_NDF_DMA_CFG not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000168ull);
}
#else
#define CVMX_MIO_NDF_DMA_CFG (CVMX_ADD_IO_SEG(0x0001180000000168ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_NDF_DMA_INT CVMX_MIO_NDF_DMA_INT_FUNC()
static inline uint64_t CVMX_MIO_NDF_DMA_INT_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_NDF_DMA_INT not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000170ull);
}
#else
#define CVMX_MIO_NDF_DMA_INT (CVMX_ADD_IO_SEG(0x0001180000000170ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_NDF_DMA_INT_EN CVMX_MIO_NDF_DMA_INT_EN_FUNC()
static inline uint64_t CVMX_MIO_NDF_DMA_INT_EN_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_NDF_DMA_INT_EN not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000178ull);
}
#else
#define CVMX_MIO_NDF_DMA_INT_EN (CVMX_ADD_IO_SEG(0x0001180000000178ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PLL_CTL CVMX_MIO_PLL_CTL_FUNC()
static inline uint64_t CVMX_MIO_PLL_CTL_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN30XX) || OCTEON_IS_MODEL(OCTEON_CN31XX)))
		cvmx_warn("CVMX_MIO_PLL_CTL not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001448ull);
}
#else
#define CVMX_MIO_PLL_CTL (CVMX_ADD_IO_SEG(0x0001180000001448ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PLL_SETTING CVMX_MIO_PLL_SETTING_FUNC()
static inline uint64_t CVMX_MIO_PLL_SETTING_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN30XX) || OCTEON_IS_MODEL(OCTEON_CN31XX)))
		cvmx_warn("CVMX_MIO_PLL_SETTING not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001440ull);
}
#else
#define CVMX_MIO_PLL_SETTING (CVMX_ADD_IO_SEG(0x0001180000001440ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_CKOUT_HI_INCR CVMX_MIO_PTP_CKOUT_HI_INCR_FUNC()
static inline uint64_t CVMX_MIO_PTP_CKOUT_HI_INCR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_CKOUT_HI_INCR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F40ull);
}
#else
#define CVMX_MIO_PTP_CKOUT_HI_INCR (CVMX_ADD_IO_SEG(0x0001070000000F40ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_CKOUT_LO_INCR CVMX_MIO_PTP_CKOUT_LO_INCR_FUNC()
static inline uint64_t CVMX_MIO_PTP_CKOUT_LO_INCR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_CKOUT_LO_INCR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F48ull);
}
#else
#define CVMX_MIO_PTP_CKOUT_LO_INCR (CVMX_ADD_IO_SEG(0x0001070000000F48ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_CKOUT_THRESH_HI CVMX_MIO_PTP_CKOUT_THRESH_HI_FUNC()
static inline uint64_t CVMX_MIO_PTP_CKOUT_THRESH_HI_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_CKOUT_THRESH_HI not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F38ull);
}
#else
#define CVMX_MIO_PTP_CKOUT_THRESH_HI (CVMX_ADD_IO_SEG(0x0001070000000F38ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_CKOUT_THRESH_LO CVMX_MIO_PTP_CKOUT_THRESH_LO_FUNC()
static inline uint64_t CVMX_MIO_PTP_CKOUT_THRESH_LO_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_CKOUT_THRESH_LO not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F30ull);
}
#else
#define CVMX_MIO_PTP_CKOUT_THRESH_LO (CVMX_ADD_IO_SEG(0x0001070000000F30ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_CLOCK_CFG CVMX_MIO_PTP_CLOCK_CFG_FUNC()
static inline uint64_t CVMX_MIO_PTP_CLOCK_CFG_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_CLOCK_CFG not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F00ull);
}
#else
#define CVMX_MIO_PTP_CLOCK_CFG (CVMX_ADD_IO_SEG(0x0001070000000F00ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_CLOCK_COMP CVMX_MIO_PTP_CLOCK_COMP_FUNC()
static inline uint64_t CVMX_MIO_PTP_CLOCK_COMP_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_CLOCK_COMP not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F18ull);
}
#else
#define CVMX_MIO_PTP_CLOCK_COMP (CVMX_ADD_IO_SEG(0x0001070000000F18ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_CLOCK_HI CVMX_MIO_PTP_CLOCK_HI_FUNC()
static inline uint64_t CVMX_MIO_PTP_CLOCK_HI_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_CLOCK_HI not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F10ull);
}
#else
#define CVMX_MIO_PTP_CLOCK_HI (CVMX_ADD_IO_SEG(0x0001070000000F10ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_CLOCK_LO CVMX_MIO_PTP_CLOCK_LO_FUNC()
static inline uint64_t CVMX_MIO_PTP_CLOCK_LO_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_CLOCK_LO not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F08ull);
}
#else
#define CVMX_MIO_PTP_CLOCK_LO (CVMX_ADD_IO_SEG(0x0001070000000F08ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_EVT_CNT CVMX_MIO_PTP_EVT_CNT_FUNC()
static inline uint64_t CVMX_MIO_PTP_EVT_CNT_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_EVT_CNT not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F28ull);
}
#else
#define CVMX_MIO_PTP_EVT_CNT (CVMX_ADD_IO_SEG(0x0001070000000F28ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_PHY_1PPS_IN CVMX_MIO_PTP_PHY_1PPS_IN_FUNC()
static inline uint64_t CVMX_MIO_PTP_PHY_1PPS_IN_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_PHY_1PPS_IN not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F70ull);
}
#else
#define CVMX_MIO_PTP_PHY_1PPS_IN (CVMX_ADD_IO_SEG(0x0001070000000F70ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_PPS_HI_INCR CVMX_MIO_PTP_PPS_HI_INCR_FUNC()
static inline uint64_t CVMX_MIO_PTP_PPS_HI_INCR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_PPS_HI_INCR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F60ull);
}
#else
#define CVMX_MIO_PTP_PPS_HI_INCR (CVMX_ADD_IO_SEG(0x0001070000000F60ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_PPS_LO_INCR CVMX_MIO_PTP_PPS_LO_INCR_FUNC()
static inline uint64_t CVMX_MIO_PTP_PPS_LO_INCR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_PPS_LO_INCR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F68ull);
}
#else
#define CVMX_MIO_PTP_PPS_LO_INCR (CVMX_ADD_IO_SEG(0x0001070000000F68ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_PPS_THRESH_HI CVMX_MIO_PTP_PPS_THRESH_HI_FUNC()
static inline uint64_t CVMX_MIO_PTP_PPS_THRESH_HI_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_PPS_THRESH_HI not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F58ull);
}
#else
#define CVMX_MIO_PTP_PPS_THRESH_HI (CVMX_ADD_IO_SEG(0x0001070000000F58ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_PPS_THRESH_LO CVMX_MIO_PTP_PPS_THRESH_LO_FUNC()
static inline uint64_t CVMX_MIO_PTP_PPS_THRESH_LO_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_PPS_THRESH_LO not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F50ull);
}
#else
#define CVMX_MIO_PTP_PPS_THRESH_LO (CVMX_ADD_IO_SEG(0x0001070000000F50ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_PTP_TIMESTAMP CVMX_MIO_PTP_TIMESTAMP_FUNC()
static inline uint64_t CVMX_MIO_PTP_TIMESTAMP_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_PTP_TIMESTAMP not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001070000000F20ull);
}
#else
#define CVMX_MIO_PTP_TIMESTAMP (CVMX_ADD_IO_SEG(0x0001070000000F20ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_QLMX_CFG(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 2))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 2))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 4))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_QLMX_CFG(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000001590ull) + ((offset) & 7) * 8;
}
#else
#define CVMX_MIO_QLMX_CFG(offset) (CVMX_ADD_IO_SEG(0x0001180000001590ull) + ((offset) & 7) * 8)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_RST_BOOT CVMX_MIO_RST_BOOT_FUNC()
static inline uint64_t CVMX_MIO_RST_BOOT_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_RST_BOOT not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001600ull);
}
#else
#define CVMX_MIO_RST_BOOT (CVMX_ADD_IO_SEG(0x0001180000001600ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_RST_CFG CVMX_MIO_RST_CFG_FUNC()
static inline uint64_t CVMX_MIO_RST_CFG_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_RST_CFG not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001610ull);
}
#else
#define CVMX_MIO_RST_CFG (CVMX_ADD_IO_SEG(0x0001180000001610ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_RST_CKILL CVMX_MIO_RST_CKILL_FUNC()
static inline uint64_t CVMX_MIO_RST_CKILL_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_RST_CKILL not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001638ull);
}
#else
#define CVMX_MIO_RST_CKILL (CVMX_ADD_IO_SEG(0x0001180000001638ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_RST_CNTLX(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 3))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_RST_CNTLX(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000001648ull) + ((offset) & 3) * 8;
}
#else
#define CVMX_MIO_RST_CNTLX(offset) (CVMX_ADD_IO_SEG(0x0001180000001648ull) + ((offset) & 3) * 8)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_RST_CTLX(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_RST_CTLX(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000001618ull) + ((offset) & 1) * 8;
}
#else
#define CVMX_MIO_RST_CTLX(offset) (CVMX_ADD_IO_SEG(0x0001180000001618ull) + ((offset) & 1) * 8)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_RST_DELAY CVMX_MIO_RST_DELAY_FUNC()
static inline uint64_t CVMX_MIO_RST_DELAY_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_RST_DELAY not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001608ull);
}
#else
#define CVMX_MIO_RST_DELAY (CVMX_ADD_IO_SEG(0x0001180000001608ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_RST_INT CVMX_MIO_RST_INT_FUNC()
static inline uint64_t CVMX_MIO_RST_INT_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_RST_INT not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001628ull);
}
#else
#define CVMX_MIO_RST_INT (CVMX_ADD_IO_SEG(0x0001180000001628ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_RST_INT_EN CVMX_MIO_RST_INT_EN_FUNC()
static inline uint64_t CVMX_MIO_RST_INT_EN_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN61XX) || OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN68XX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)))
		cvmx_warn("CVMX_MIO_RST_INT_EN not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000001630ull);
}
#else
#define CVMX_MIO_RST_INT_EN (CVMX_ADD_IO_SEG(0x0001180000001630ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_TWSX_INT(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_TWSX_INT(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000001010ull) + ((offset) & 1) * 512;
}
#else
#define CVMX_MIO_TWSX_INT(offset) (CVMX_ADD_IO_SEG(0x0001180000001010ull) + ((offset) & 1) * 512)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_TWSX_SW_TWSI(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_TWSX_SW_TWSI(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000001000ull) + ((offset) & 1) * 512;
}
#else
#define CVMX_MIO_TWSX_SW_TWSI(offset) (CVMX_ADD_IO_SEG(0x0001180000001000ull) + ((offset) & 1) * 512)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_TWSX_SW_TWSI_EXT(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_TWSX_SW_TWSI_EXT(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000001018ull) + ((offset) & 1) * 512;
}
#else
#define CVMX_MIO_TWSX_SW_TWSI_EXT(offset) (CVMX_ADD_IO_SEG(0x0001180000001018ull) + ((offset) & 1) * 512)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_TWSX_TWSI_SW(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset == 0))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_TWSX_TWSI_SW(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000001008ull) + ((offset) & 1) * 512;
}
#else
#define CVMX_MIO_TWSX_TWSI_SW(offset) (CVMX_ADD_IO_SEG(0x0001180000001008ull) + ((offset) & 1) * 512)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_DLH CVMX_MIO_UART2_DLH_FUNC()
static inline uint64_t CVMX_MIO_UART2_DLH_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_DLH not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000488ull);
}
#else
#define CVMX_MIO_UART2_DLH (CVMX_ADD_IO_SEG(0x0001180000000488ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_DLL CVMX_MIO_UART2_DLL_FUNC()
static inline uint64_t CVMX_MIO_UART2_DLL_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_DLL not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000480ull);
}
#else
#define CVMX_MIO_UART2_DLL (CVMX_ADD_IO_SEG(0x0001180000000480ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_FAR CVMX_MIO_UART2_FAR_FUNC()
static inline uint64_t CVMX_MIO_UART2_FAR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_FAR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000520ull);
}
#else
#define CVMX_MIO_UART2_FAR (CVMX_ADD_IO_SEG(0x0001180000000520ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_FCR CVMX_MIO_UART2_FCR_FUNC()
static inline uint64_t CVMX_MIO_UART2_FCR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_FCR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000450ull);
}
#else
#define CVMX_MIO_UART2_FCR (CVMX_ADD_IO_SEG(0x0001180000000450ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_HTX CVMX_MIO_UART2_HTX_FUNC()
static inline uint64_t CVMX_MIO_UART2_HTX_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_HTX not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000708ull);
}
#else
#define CVMX_MIO_UART2_HTX (CVMX_ADD_IO_SEG(0x0001180000000708ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_IER CVMX_MIO_UART2_IER_FUNC()
static inline uint64_t CVMX_MIO_UART2_IER_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_IER not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000408ull);
}
#else
#define CVMX_MIO_UART2_IER (CVMX_ADD_IO_SEG(0x0001180000000408ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_IIR CVMX_MIO_UART2_IIR_FUNC()
static inline uint64_t CVMX_MIO_UART2_IIR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_IIR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000410ull);
}
#else
#define CVMX_MIO_UART2_IIR (CVMX_ADD_IO_SEG(0x0001180000000410ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_LCR CVMX_MIO_UART2_LCR_FUNC()
static inline uint64_t CVMX_MIO_UART2_LCR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_LCR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000418ull);
}
#else
#define CVMX_MIO_UART2_LCR (CVMX_ADD_IO_SEG(0x0001180000000418ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_LSR CVMX_MIO_UART2_LSR_FUNC()
static inline uint64_t CVMX_MIO_UART2_LSR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_LSR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000428ull);
}
#else
#define CVMX_MIO_UART2_LSR (CVMX_ADD_IO_SEG(0x0001180000000428ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_MCR CVMX_MIO_UART2_MCR_FUNC()
static inline uint64_t CVMX_MIO_UART2_MCR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_MCR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000420ull);
}
#else
#define CVMX_MIO_UART2_MCR (CVMX_ADD_IO_SEG(0x0001180000000420ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_MSR CVMX_MIO_UART2_MSR_FUNC()
static inline uint64_t CVMX_MIO_UART2_MSR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_MSR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000430ull);
}
#else
#define CVMX_MIO_UART2_MSR (CVMX_ADD_IO_SEG(0x0001180000000430ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_RBR CVMX_MIO_UART2_RBR_FUNC()
static inline uint64_t CVMX_MIO_UART2_RBR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_RBR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000400ull);
}
#else
#define CVMX_MIO_UART2_RBR (CVMX_ADD_IO_SEG(0x0001180000000400ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_RFL CVMX_MIO_UART2_RFL_FUNC()
static inline uint64_t CVMX_MIO_UART2_RFL_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_RFL not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000608ull);
}
#else
#define CVMX_MIO_UART2_RFL (CVMX_ADD_IO_SEG(0x0001180000000608ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_RFW CVMX_MIO_UART2_RFW_FUNC()
static inline uint64_t CVMX_MIO_UART2_RFW_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_RFW not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000530ull);
}
#else
#define CVMX_MIO_UART2_RFW (CVMX_ADD_IO_SEG(0x0001180000000530ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_SBCR CVMX_MIO_UART2_SBCR_FUNC()
static inline uint64_t CVMX_MIO_UART2_SBCR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_SBCR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000620ull);
}
#else
#define CVMX_MIO_UART2_SBCR (CVMX_ADD_IO_SEG(0x0001180000000620ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_SCR CVMX_MIO_UART2_SCR_FUNC()
static inline uint64_t CVMX_MIO_UART2_SCR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_SCR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000438ull);
}
#else
#define CVMX_MIO_UART2_SCR (CVMX_ADD_IO_SEG(0x0001180000000438ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_SFE CVMX_MIO_UART2_SFE_FUNC()
static inline uint64_t CVMX_MIO_UART2_SFE_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_SFE not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000630ull);
}
#else
#define CVMX_MIO_UART2_SFE (CVMX_ADD_IO_SEG(0x0001180000000630ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_SRR CVMX_MIO_UART2_SRR_FUNC()
static inline uint64_t CVMX_MIO_UART2_SRR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_SRR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000610ull);
}
#else
#define CVMX_MIO_UART2_SRR (CVMX_ADD_IO_SEG(0x0001180000000610ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_SRT CVMX_MIO_UART2_SRT_FUNC()
static inline uint64_t CVMX_MIO_UART2_SRT_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_SRT not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000638ull);
}
#else
#define CVMX_MIO_UART2_SRT (CVMX_ADD_IO_SEG(0x0001180000000638ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_SRTS CVMX_MIO_UART2_SRTS_FUNC()
static inline uint64_t CVMX_MIO_UART2_SRTS_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_SRTS not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000618ull);
}
#else
#define CVMX_MIO_UART2_SRTS (CVMX_ADD_IO_SEG(0x0001180000000618ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_STT CVMX_MIO_UART2_STT_FUNC()
static inline uint64_t CVMX_MIO_UART2_STT_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_STT not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000700ull);
}
#else
#define CVMX_MIO_UART2_STT (CVMX_ADD_IO_SEG(0x0001180000000700ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_TFL CVMX_MIO_UART2_TFL_FUNC()
static inline uint64_t CVMX_MIO_UART2_TFL_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_TFL not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000600ull);
}
#else
#define CVMX_MIO_UART2_TFL (CVMX_ADD_IO_SEG(0x0001180000000600ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_TFR CVMX_MIO_UART2_TFR_FUNC()
static inline uint64_t CVMX_MIO_UART2_TFR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_TFR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000528ull);
}
#else
#define CVMX_MIO_UART2_TFR (CVMX_ADD_IO_SEG(0x0001180000000528ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_THR CVMX_MIO_UART2_THR_FUNC()
static inline uint64_t CVMX_MIO_UART2_THR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_THR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000440ull);
}
#else
#define CVMX_MIO_UART2_THR (CVMX_ADD_IO_SEG(0x0001180000000440ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
#define CVMX_MIO_UART2_USR CVMX_MIO_UART2_USR_FUNC()
static inline uint64_t CVMX_MIO_UART2_USR_FUNC(void)
{
	if (!(OCTEON_IS_MODEL(OCTEON_CN52XX)))
		cvmx_warn("CVMX_MIO_UART2_USR not supported on this chip\n");
	return CVMX_ADD_IO_SEG(0x0001180000000538ull);
}
#else
#define CVMX_MIO_UART2_USR (CVMX_ADD_IO_SEG(0x0001180000000538ull))
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_DLH(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_DLH(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000888ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_DLH(offset) (CVMX_ADD_IO_SEG(0x0001180000000888ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_DLL(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_DLL(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000880ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_DLL(offset) (CVMX_ADD_IO_SEG(0x0001180000000880ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_FAR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_FAR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000920ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_FAR(offset) (CVMX_ADD_IO_SEG(0x0001180000000920ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_FCR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_FCR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000850ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_FCR(offset) (CVMX_ADD_IO_SEG(0x0001180000000850ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_HTX(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_HTX(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000B08ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_HTX(offset) (CVMX_ADD_IO_SEG(0x0001180000000B08ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_IER(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_IER(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000808ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_IER(offset) (CVMX_ADD_IO_SEG(0x0001180000000808ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_IIR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_IIR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000810ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_IIR(offset) (CVMX_ADD_IO_SEG(0x0001180000000810ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_LCR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_LCR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000818ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_LCR(offset) (CVMX_ADD_IO_SEG(0x0001180000000818ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_LSR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_LSR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000828ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_LSR(offset) (CVMX_ADD_IO_SEG(0x0001180000000828ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_MCR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_MCR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000820ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_MCR(offset) (CVMX_ADD_IO_SEG(0x0001180000000820ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_MSR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_MSR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000830ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_MSR(offset) (CVMX_ADD_IO_SEG(0x0001180000000830ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_RBR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_RBR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000800ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_RBR(offset) (CVMX_ADD_IO_SEG(0x0001180000000800ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_RFL(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_RFL(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000A08ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_RFL(offset) (CVMX_ADD_IO_SEG(0x0001180000000A08ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_RFW(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_RFW(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000930ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_RFW(offset) (CVMX_ADD_IO_SEG(0x0001180000000930ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_SBCR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_SBCR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000A20ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_SBCR(offset) (CVMX_ADD_IO_SEG(0x0001180000000A20ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_SCR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_SCR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000838ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_SCR(offset) (CVMX_ADD_IO_SEG(0x0001180000000838ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_SFE(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_SFE(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000A30ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_SFE(offset) (CVMX_ADD_IO_SEG(0x0001180000000A30ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_SRR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_SRR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000A10ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_SRR(offset) (CVMX_ADD_IO_SEG(0x0001180000000A10ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_SRT(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_SRT(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000A38ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_SRT(offset) (CVMX_ADD_IO_SEG(0x0001180000000A38ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_SRTS(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_SRTS(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000A18ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_SRTS(offset) (CVMX_ADD_IO_SEG(0x0001180000000A18ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_STT(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_STT(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000B00ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_STT(offset) (CVMX_ADD_IO_SEG(0x0001180000000B00ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_TFL(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_TFL(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000A00ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_TFL(offset) (CVMX_ADD_IO_SEG(0x0001180000000A00ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_TFR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_TFR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000928ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_TFR(offset) (CVMX_ADD_IO_SEG(0x0001180000000928ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_THR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_THR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000840ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_THR(offset) (CVMX_ADD_IO_SEG(0x0001180000000840ull) + ((offset) & 1) * 1024)
#endif
#if CVMX_ENABLE_CSR_ADDRESS_CHECKING
static inline uint64_t CVMX_MIO_UARTX_USR(unsigned long offset)
{
	if (!(
	      (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN38XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN58XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN61XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN63XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN66XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CN68XX) && ((offset <= 1))) ||
	      (OCTEON_IS_MODEL(OCTEON_CNF71XX) && ((offset <= 1)))))
		cvmx_warn("CVMX_MIO_UARTX_USR(%lu) is invalid on this chip\n", offset);
	return CVMX_ADD_IO_SEG(0x0001180000000938ull) + ((offset) & 1) * 1024;
}
#else
#define CVMX_MIO_UARTX_USR(offset) (CVMX_ADD_IO_SEG(0x0001180000000938ull) + ((offset) & 1) * 1024)
#endif

/**
 * cvmx_mio_boot_bist_stat
 *
 * MIO_BOOT_BIST_STAT = MIO Boot BIST Status Register
 *
 * Contains the BIST status for the MIO boot memories.  '0' = pass, '1' = fail.
 */
union cvmx_mio_boot_bist_stat {
	uint64_t u64;
	struct cvmx_mio_boot_bist_stat_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_0_63                : 64;
#else
	uint64_t reserved_0_63                : 64;
#endif
	} s;
	struct cvmx_mio_boot_bist_stat_cn30xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_4_63                : 60;
	uint64_t ncbo_1                       : 1;  /**< NCB output FIFO 1 BIST status */
	uint64_t ncbo_0                       : 1;  /**< NCB output FIFO 0 BIST status */
	uint64_t loc                          : 1;  /**< Local memory BIST status */
	uint64_t ncbi                         : 1;  /**< NCB input FIFO BIST status */
#else
	uint64_t ncbi                         : 1;
	uint64_t loc                          : 1;
	uint64_t ncbo_0                       : 1;
	uint64_t ncbo_1                       : 1;
	uint64_t reserved_4_63                : 60;
#endif
	} cn30xx;
	struct cvmx_mio_boot_bist_stat_cn30xx cn31xx;
	struct cvmx_mio_boot_bist_stat_cn38xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_3_63                : 61;
	uint64_t ncbo_0                       : 1;  /**< NCB output FIFO BIST status */
	uint64_t loc                          : 1;  /**< Local memory BIST status */
	uint64_t ncbi                         : 1;  /**< NCB input FIFO BIST status */
#else
	uint64_t ncbi                         : 1;
	uint64_t loc                          : 1;
	uint64_t ncbo_0                       : 1;
	uint64_t reserved_3_63                : 61;
#endif
	} cn38xx;
	struct cvmx_mio_boot_bist_stat_cn38xx cn38xxp2;
	struct cvmx_mio_boot_bist_stat_cn50xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_6_63                : 58;
	uint64_t pcm_1                        : 1;  /**< PCM memory 1 BIST status */
	uint64_t pcm_0                        : 1;  /**< PCM memory 0 BIST status */
	uint64_t ncbo_1                       : 1;  /**< NCB output FIFO 1 BIST status */
	uint64_t ncbo_0                       : 1;  /**< NCB output FIFO 0 BIST status */
	uint64_t loc                          : 1;  /**< Local memory region BIST status */
	uint64_t ncbi                         : 1;  /**< NCB input FIFO BIST status */
#else
	uint64_t ncbi                         : 1;
	uint64_t loc                          : 1;
	uint64_t ncbo_0                       : 1;
	uint64_t ncbo_1                       : 1;
	uint64_t pcm_0                        : 1;
	uint64_t pcm_1                        : 1;
	uint64_t reserved_6_63                : 58;
#endif
	} cn50xx;
	struct cvmx_mio_boot_bist_stat_cn52xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_6_63                : 58;
	uint64_t ndf                          : 2;  /**< NAND flash BIST status */
	uint64_t ncbo_0                       : 1;  /**< NCB output FIFO BIST status */
	uint64_t dma                          : 1;  /**< DMA memory BIST status */
	uint64_t loc                          : 1;  /**< Local memory BIST status */
	uint64_t ncbi                         : 1;  /**< NCB input FIFO BIST status */
#else
	uint64_t ncbi                         : 1;
	uint64_t loc                          : 1;
	uint64_t dma                          : 1;
	uint64_t ncbo_0                       : 1;
	uint64_t ndf                          : 2;
	uint64_t reserved_6_63                : 58;
#endif
	} cn52xx;
	struct cvmx_mio_boot_bist_stat_cn52xxp1 {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_4_63                : 60;
	uint64_t ncbo_0                       : 1;  /**< NCB output FIFO BIST status */
	uint64_t dma                          : 1;  /**< DMA memory BIST status */
	uint64_t loc                          : 1;  /**< Local memory region BIST status */
	uint64_t ncbi                         : 1;  /**< NCB input FIFO BIST status */
#else
	uint64_t ncbi                         : 1;
	uint64_t loc                          : 1;
	uint64_t dma                          : 1;
	uint64_t ncbo_0                       : 1;
	uint64_t reserved_4_63                : 60;
#endif
	} cn52xxp1;
	struct cvmx_mio_boot_bist_stat_cn52xxp1 cn56xx;
	struct cvmx_mio_boot_bist_stat_cn52xxp1 cn56xxp1;
	struct cvmx_mio_boot_bist_stat_cn38xx cn58xx;
	struct cvmx_mio_boot_bist_stat_cn38xx cn58xxp1;
	struct cvmx_mio_boot_bist_stat_cn61xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_12_63               : 52;
	uint64_t stat                         : 12; /**< BIST status */
#else
	uint64_t stat                         : 12;
	uint64_t reserved_12_63               : 52;
#endif
	} cn61xx;
	struct cvmx_mio_boot_bist_stat_cn63xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_9_63                : 55;
	uint64_t stat                         : 9;  /**< BIST status */
#else
	uint64_t stat                         : 9;
	uint64_t reserved_9_63                : 55;
#endif
	} cn63xx;
	struct cvmx_mio_boot_bist_stat_cn63xx cn63xxp1;
	struct cvmx_mio_boot_bist_stat_cn66xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_10_63               : 54;
	uint64_t stat                         : 10; /**< BIST status */
#else
	uint64_t stat                         : 10;
	uint64_t reserved_10_63               : 54;
#endif
	} cn66xx;
	struct cvmx_mio_boot_bist_stat_cn66xx cn68xx;
	struct cvmx_mio_boot_bist_stat_cn66xx cn68xxp1;
	struct cvmx_mio_boot_bist_stat_cn61xx cnf71xx;
};
typedef union cvmx_mio_boot_bist_stat cvmx_mio_boot_bist_stat_t;

/**
 * cvmx_mio_boot_comp
 *
 * MIO_BOOT_COMP = MIO Boot Compensation Register
 *
 * Reset value is as follows:
 *
 * no pullups,               PCTL=38, NCTL=30 (25 ohm termination)
 * pullup on boot_ad[9],     PCTL=19, NCTL=15 (50 ohm termination)
 * pullup on boot_ad[10],    PCTL=15, NCTL=12 (65 ohm termination)
 * pullups on boot_ad[10:9], PCTL=15, NCTL=12 (65 ohm termination)
 */
union cvmx_mio_boot_comp {
	uint64_t u64;
	struct cvmx_mio_boot_comp_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_0_63                : 64;
#else
	uint64_t reserved_0_63                : 64;
#endif
	} s;
	struct cvmx_mio_boot_comp_cn50xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_10_63               : 54;
	uint64_t pctl                         : 5;  /**< Boot bus PCTL */
	uint64_t nctl                         : 5;  /**< Boot bus NCTL */
#else
	uint64_t nctl                         : 5;
	uint64_t pctl                         : 5;
	uint64_t reserved_10_63               : 54;
#endif
	} cn50xx;
	struct cvmx_mio_boot_comp_cn50xx      cn52xx;
	struct cvmx_mio_boot_comp_cn50xx      cn52xxp1;
	struct cvmx_mio_boot_comp_cn50xx      cn56xx;
	struct cvmx_mio_boot_comp_cn50xx      cn56xxp1;
	struct cvmx_mio_boot_comp_cn61xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_12_63               : 52;
	uint64_t pctl                         : 6;  /**< Boot bus PCTL */
	uint64_t nctl                         : 6;  /**< Boot bus NCTL */
#else
	uint64_t nctl                         : 6;
	uint64_t pctl                         : 6;
	uint64_t reserved_12_63               : 52;
#endif
	} cn61xx;
	struct cvmx_mio_boot_comp_cn61xx      cn63xx;
	struct cvmx_mio_boot_comp_cn61xx      cn63xxp1;
	struct cvmx_mio_boot_comp_cn61xx      cn66xx;
	struct cvmx_mio_boot_comp_cn61xx      cn68xx;
	struct cvmx_mio_boot_comp_cn61xx      cn68xxp1;
	struct cvmx_mio_boot_comp_cn61xx      cnf71xx;
};
typedef union cvmx_mio_boot_comp cvmx_mio_boot_comp_t;

/**
 * cvmx_mio_boot_dma_cfg#
 *
 * MIO_BOOT_DMA_CFG = MIO Boot DMA Config Register (1 per engine * 2 engines)
 *
 * SIZE is specified in number of bus transfers, where one transfer is equal to the following number
 * of bytes dependent on MIO_BOOT_DMA_TIMn[WIDTH] and MIO_BOOT_DMA_TIMn[DDR]:
 *
 * WIDTH     DDR      Transfer Size (bytes)
 * ----------------------------------------
 *   0        0               2
 *   0        1               4
 *   1        0               4
 *   1        1               8
 *
 * Note: ADR must be aligned to the bus width (i.e. 16 bit aligned if WIDTH=0, 32 bit aligned if WIDTH=1).
 */
union cvmx_mio_boot_dma_cfgx {
	uint64_t u64;
	struct cvmx_mio_boot_dma_cfgx_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t en                           : 1;  /**< DMA Engine X enable */
	uint64_t rw                           : 1;  /**< DMA Engine X R/W bit (0 = read, 1 = write) */
	uint64_t clr                          : 1;  /**< DMA Engine X clear EN on device terminated burst */
	uint64_t reserved_60_60               : 1;
	uint64_t swap32                       : 1;  /**< DMA Engine X 32 bit swap */
	uint64_t swap16                       : 1;  /**< DMA Engine X 16 bit swap */
	uint64_t swap8                        : 1;  /**< DMA Engine X 8 bit swap */
	uint64_t endian                       : 1;  /**< DMA Engine X NCB endian mode (0 = big, 1 = little) */
	uint64_t size                         : 20; /**< DMA Engine X size */
	uint64_t adr                          : 36; /**< DMA Engine X address */
#else
	uint64_t adr                          : 36;
	uint64_t size                         : 20;
	uint64_t endian                       : 1;
	uint64_t swap8                        : 1;
	uint64_t swap16                       : 1;
	uint64_t swap32                       : 1;
	uint64_t reserved_60_60               : 1;
	uint64_t clr                          : 1;
	uint64_t rw                           : 1;
	uint64_t en                           : 1;
#endif
	} s;
	struct cvmx_mio_boot_dma_cfgx_s       cn52xx;
	struct cvmx_mio_boot_dma_cfgx_s       cn52xxp1;
	struct cvmx_mio_boot_dma_cfgx_s       cn56xx;
	struct cvmx_mio_boot_dma_cfgx_s       cn56xxp1;
	struct cvmx_mio_boot_dma_cfgx_s       cn61xx;
	struct cvmx_mio_boot_dma_cfgx_s       cn63xx;
	struct cvmx_mio_boot_dma_cfgx_s       cn63xxp1;
	struct cvmx_mio_boot_dma_cfgx_s       cn66xx;
	struct cvmx_mio_boot_dma_cfgx_s       cn68xx;
	struct cvmx_mio_boot_dma_cfgx_s       cn68xxp1;
	struct cvmx_mio_boot_dma_cfgx_s       cnf71xx;
};
typedef union cvmx_mio_boot_dma_cfgx cvmx_mio_boot_dma_cfgx_t;

/**
 * cvmx_mio_boot_dma_int#
 *
 * MIO_BOOT_DMA_INT = MIO Boot DMA Interrupt Register (1 per engine * 2 engines)
 *
 */
union cvmx_mio_boot_dma_intx {
	uint64_t u64;
	struct cvmx_mio_boot_dma_intx_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_2_63                : 62;
	uint64_t dmarq                        : 1;  /**< DMA Engine X DMARQ asserted interrupt */
	uint64_t done                         : 1;  /**< DMA Engine X request completion interrupt */
#else
	uint64_t done                         : 1;
	uint64_t dmarq                        : 1;
	uint64_t reserved_2_63                : 62;
#endif
	} s;
	struct cvmx_mio_boot_dma_intx_s       cn52xx;
	struct cvmx_mio_boot_dma_intx_s       cn52xxp1;
	struct cvmx_mio_boot_dma_intx_s       cn56xx;
	struct cvmx_mio_boot_dma_intx_s       cn56xxp1;
	struct cvmx_mio_boot_dma_intx_s       cn61xx;
	struct cvmx_mio_boot_dma_intx_s       cn63xx;
	struct cvmx_mio_boot_dma_intx_s       cn63xxp1;
	struct cvmx_mio_boot_dma_intx_s       cn66xx;
	struct cvmx_mio_boot_dma_intx_s       cn68xx;
	struct cvmx_mio_boot_dma_intx_s       cn68xxp1;
	struct cvmx_mio_boot_dma_intx_s       cnf71xx;
};
typedef union cvmx_mio_boot_dma_intx cvmx_mio_boot_dma_intx_t;

/**
 * cvmx_mio_boot_dma_int_en#
 *
 * MIO_BOOT_DMA_INT_EN = MIO Boot DMA Interrupt Enable Register (1 per engine * 2 engines)
 *
 */
union cvmx_mio_boot_dma_int_enx {
	uint64_t u64;
	struct cvmx_mio_boot_dma_int_enx_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_2_63                : 62;
	uint64_t dmarq                        : 1;  /**< DMA Engine X DMARQ asserted interrupt enable */
	uint64_t done                         : 1;  /**< DMA Engine X request completion interrupt enable */
#else
	uint64_t done                         : 1;
	uint64_t dmarq                        : 1;
	uint64_t reserved_2_63                : 62;
#endif
	} s;
	struct cvmx_mio_boot_dma_int_enx_s    cn52xx;
	struct cvmx_mio_boot_dma_int_enx_s    cn52xxp1;
	struct cvmx_mio_boot_dma_int_enx_s    cn56xx;
	struct cvmx_mio_boot_dma_int_enx_s    cn56xxp1;
	struct cvmx_mio_boot_dma_int_enx_s    cn61xx;
	struct cvmx_mio_boot_dma_int_enx_s    cn63xx;
	struct cvmx_mio_boot_dma_int_enx_s    cn63xxp1;
	struct cvmx_mio_boot_dma_int_enx_s    cn66xx;
	struct cvmx_mio_boot_dma_int_enx_s    cn68xx;
	struct cvmx_mio_boot_dma_int_enx_s    cn68xxp1;
	struct cvmx_mio_boot_dma_int_enx_s    cnf71xx;
};
typedef union cvmx_mio_boot_dma_int_enx cvmx_mio_boot_dma_int_enx_t;

/**
 * cvmx_mio_boot_dma_tim#
 *
 * MIO_BOOT_DMA_TIM = MIO Boot DMA Timing Register (1 per engine * 2 engines)
 *
 * DMACK_PI inverts the assertion level of boot_dmack[n].  The default polarity of boot_dmack[1:0] is
 * selected on the first de-assertion of reset by the values on boot_ad[12:11], where 0 is active high
 * and 1 is active low (see MIO_BOOT_PIN_DEFS for a read-only copy of the default polarity).
 * boot_ad[12:11] have internal pulldowns, so place a pullup on boot_ad[n+11] for active low default
 * polarity on engine n.  To interface with CF cards in True IDE Mode, either a pullup should be placed
 * on boot_ad[n+11] OR the corresponding DMACK_PI[n] should be set.
 *
 * DMARQ_PI inverts the assertion level of boot_dmarq[n].  The default polarity of boot_dmarq[1:0] is
 * active high, thus setting the polarity inversion bits changes the polarity to active low.  To
 * interface with CF cards in True IDE Mode, the corresponding DMARQ_PI[n] should be clear.
 *
 * TIM_MULT specifies the timing multiplier for an engine.  The timing multiplier applies to all timing
 * parameters, except for DMARQ and RD_DLY, which simply count eclks.  TIM_MULT is encoded as follows:
 * 0 = 4x, 1 = 1x, 2 = 2x, 3 = 8x.
 *
 * RD_DLY specifies the read sample delay in eclk cycles for an engine.  For reads, the data bus is
 * normally sampled on the same eclk edge that drives boot_oe_n high (and also low in DDR mode).
 * This parameter can delay that sampling edge by up to 7 eclks.  Note: the number of eclk cycles
 * counted by the OE_A and DMACK_H + PAUSE timing parameters must be greater than RD_DLY.
 *
 * If DDR is set, then WE_N must be less than WE_A.
 */
union cvmx_mio_boot_dma_timx {
	uint64_t u64;
	struct cvmx_mio_boot_dma_timx_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t dmack_pi                     : 1;  /**< DMA Engine X DMA ack polarity inversion */
	uint64_t dmarq_pi                     : 1;  /**< DMA Engine X DMA request polarity inversion */
	uint64_t tim_mult                     : 2;  /**< DMA Engine X timing multiplier */
	uint64_t rd_dly                       : 3;  /**< DMA Engine X read sample delay */
	uint64_t ddr                          : 1;  /**< DMA Engine X DDR mode */
	uint64_t width                        : 1;  /**< DMA Engine X bus width (0 = 16 bits, 1 = 32 bits) */
	uint64_t reserved_48_54               : 7;
	uint64_t pause                        : 6;  /**< DMA Engine X pause count */
	uint64_t dmack_h                      : 6;  /**< DMA Engine X DMA ack hold count */
	uint64_t we_n                         : 6;  /**< DMA Engine X write enable negated count */
	uint64_t we_a                         : 6;  /**< DMA Engine X write enable asserted count */
	uint64_t oe_n                         : 6;  /**< DMA Engine X output enable negated count */
	uint64_t oe_a                         : 6;  /**< DMA Engine X output enable asserted count */
	uint64_t dmack_s                      : 6;  /**< DMA Engine X DMA ack setup count */
	uint64_t dmarq                        : 6;  /**< DMA Engine X DMA request count (must be non-zero) */
#else
	uint64_t dmarq                        : 6;
	uint64_t dmack_s                      : 6;
	uint64_t oe_a                         : 6;
	uint64_t oe_n                         : 6;
	uint64_t we_a                         : 6;
	uint64_t we_n                         : 6;
	uint64_t dmack_h                      : 6;
	uint64_t pause                        : 6;
	uint64_t reserved_48_54               : 7;
	uint64_t width                        : 1;
	uint64_t ddr                          : 1;
	uint64_t rd_dly                       : 3;
	uint64_t tim_mult                     : 2;
	uint64_t dmarq_pi                     : 1;
	uint64_t dmack_pi                     : 1;
#endif
	} s;
	struct cvmx_mio_boot_dma_timx_s       cn52xx;
	struct cvmx_mio_boot_dma_timx_s       cn52xxp1;
	struct cvmx_mio_boot_dma_timx_s       cn56xx;
	struct cvmx_mio_boot_dma_timx_s       cn56xxp1;
	struct cvmx_mio_boot_dma_timx_s       cn61xx;
	struct cvmx_mio_boot_dma_timx_s       cn63xx;
	struct cvmx_mio_boot_dma_timx_s       cn63xxp1;
	struct cvmx_mio_boot_dma_timx_s       cn66xx;
	struct cvmx_mio_boot_dma_timx_s       cn68xx;
	struct cvmx_mio_boot_dma_timx_s       cn68xxp1;
	struct cvmx_mio_boot_dma_timx_s       cnf71xx;
};
typedef union cvmx_mio_boot_dma_timx cvmx_mio_boot_dma_timx_t;

/**
 * cvmx_mio_boot_err
 *
 * MIO_BOOT_ERR = MIO Boot Error Register
 *
 * Contains the address decode error and wait mode error bits.  Address decode error is set when a
 * boot bus access does not hit in any of the 8 remote regions or 2 local memory regions.  Wait mode error is
 * set when wait mode is enabled and the external wait signal is not de-asserted after 32k eclk cycles.
 */
union cvmx_mio_boot_err {
	uint64_t u64;
	struct cvmx_mio_boot_err_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_2_63                : 62;
	uint64_t wait_err                     : 1;  /**< Wait mode error */
	uint64_t adr_err                      : 1;  /**< Address decode error */
#else
	uint64_t adr_err                      : 1;
	uint64_t wait_err                     : 1;
	uint64_t reserved_2_63                : 62;
#endif
	} s;
	struct cvmx_mio_boot_err_s            cn30xx;
	struct cvmx_mio_boot_err_s            cn31xx;
	struct cvmx_mio_boot_err_s            cn38xx;
	struct cvmx_mio_boot_err_s            cn38xxp2;
	struct cvmx_mio_boot_err_s            cn50xx;
	struct cvmx_mio_boot_err_s            cn52xx;
	struct cvmx_mio_boot_err_s            cn52xxp1;
	struct cvmx_mio_boot_err_s            cn56xx;
	struct cvmx_mio_boot_err_s            cn56xxp1;
	struct cvmx_mio_boot_err_s            cn58xx;
	struct cvmx_mio_boot_err_s            cn58xxp1;
	struct cvmx_mio_boot_err_s            cn61xx;
	struct cvmx_mio_boot_err_s            cn63xx;
	struct cvmx_mio_boot_err_s            cn63xxp1;
	struct cvmx_mio_boot_err_s            cn66xx;
	struct cvmx_mio_boot_err_s            cn68xx;
	struct cvmx_mio_boot_err_s            cn68xxp1;
	struct cvmx_mio_boot_err_s            cnf71xx;
};
typedef union cvmx_mio_boot_err cvmx_mio_boot_err_t;

/**
 * cvmx_mio_boot_int
 *
 * MIO_BOOT_INT = MIO Boot Interrupt Register
 *
 * Contains the interrupt enable bits for address decode error and wait mode error.
 */
union cvmx_mio_boot_int {
	uint64_t u64;
	struct cvmx_mio_boot_int_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_2_63                : 62;
	uint64_t wait_int                     : 1;  /**< Wait mode error interrupt enable */
	uint64_t adr_int                      : 1;  /**< Address decode error interrupt enable */
#else
	uint64_t adr_int                      : 1;
	uint64_t wait_int                     : 1;
	uint64_t reserved_2_63                : 62;
#endif
	} s;
	struct cvmx_mio_boot_int_s            cn30xx;
	struct cvmx_mio_boot_int_s            cn31xx;
	struct cvmx_mio_boot_int_s            cn38xx;
	struct cvmx_mio_boot_int_s            cn38xxp2;
	struct cvmx_mio_boot_int_s            cn50xx;
	struct cvmx_mio_boot_int_s            cn52xx;
	struct cvmx_mio_boot_int_s            cn52xxp1;
	struct cvmx_mio_boot_int_s            cn56xx;
	struct cvmx_mio_boot_int_s            cn56xxp1;
	struct cvmx_mio_boot_int_s            cn58xx;
	struct cvmx_mio_boot_int_s            cn58xxp1;
	struct cvmx_mio_boot_int_s            cn61xx;
	struct cvmx_mio_boot_int_s            cn63xx;
	struct cvmx_mio_boot_int_s            cn63xxp1;
	struct cvmx_mio_boot_int_s            cn66xx;
	struct cvmx_mio_boot_int_s            cn68xx;
	struct cvmx_mio_boot_int_s            cn68xxp1;
	struct cvmx_mio_boot_int_s            cnf71xx;
};
typedef union cvmx_mio_boot_int cvmx_mio_boot_int_t;

/**
 * cvmx_mio_boot_loc_adr
 *
 * MIO_BOOT_LOC_ADR = MIO Boot Local Memory Region Address Register
 *
 * Specifies the address for reading or writing the local memory region.  This address will post-increment
 * following an access to the MIO Boot Local Memory Region Data Register (MIO_BOOT_LOC_DAT).
 *
 * Local memory region 0 exists from addresses 0x00 - 0x78.
 * Local memory region 1 exists from addresses 0x80 - 0xf8.
 */
union cvmx_mio_boot_loc_adr {
	uint64_t u64;
	struct cvmx_mio_boot_loc_adr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t adr                          : 5;  /**< Local memory region address */
	uint64_t reserved_0_2                 : 3;
#else
	uint64_t reserved_0_2                 : 3;
	uint64_t adr                          : 5;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_boot_loc_adr_s        cn30xx;
	struct cvmx_mio_boot_loc_adr_s        cn31xx;
	struct cvmx_mio_boot_loc_adr_s        cn38xx;
	struct cvmx_mio_boot_loc_adr_s        cn38xxp2;
	struct cvmx_mio_boot_loc_adr_s        cn50xx;
	struct cvmx_mio_boot_loc_adr_s        cn52xx;
	struct cvmx_mio_boot_loc_adr_s        cn52xxp1;
	struct cvmx_mio_boot_loc_adr_s        cn56xx;
	struct cvmx_mio_boot_loc_adr_s        cn56xxp1;
	struct cvmx_mio_boot_loc_adr_s        cn58xx;
	struct cvmx_mio_boot_loc_adr_s        cn58xxp1;
	struct cvmx_mio_boot_loc_adr_s        cn61xx;
	struct cvmx_mio_boot_loc_adr_s        cn63xx;
	struct cvmx_mio_boot_loc_adr_s        cn63xxp1;
	struct cvmx_mio_boot_loc_adr_s        cn66xx;
	struct cvmx_mio_boot_loc_adr_s        cn68xx;
	struct cvmx_mio_boot_loc_adr_s        cn68xxp1;
	struct cvmx_mio_boot_loc_adr_s        cnf71xx;
};
typedef union cvmx_mio_boot_loc_adr cvmx_mio_boot_loc_adr_t;

/**
 * cvmx_mio_boot_loc_cfg#
 *
 * MIO_BOOT_LOC_CFG = MIO Boot Local Memory Region Config Register (1 per region * 2 regions)
 *
 * Contains local memory region enable and local memory region base address parameters.  Each local memory region is 128
 * bytes organized as 16 entries x 8 bytes.
 *
 * Base address specifies address bits [31:7] of the region.
 */
union cvmx_mio_boot_loc_cfgx {
	uint64_t u64;
	struct cvmx_mio_boot_loc_cfgx_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_32_63               : 32;
	uint64_t en                           : 1;  /**< Local memory region X enable */
	uint64_t reserved_28_30               : 3;
	uint64_t base                         : 25; /**< Local memory region X base address */
	uint64_t reserved_0_2                 : 3;
#else
	uint64_t reserved_0_2                 : 3;
	uint64_t base                         : 25;
	uint64_t reserved_28_30               : 3;
	uint64_t en                           : 1;
	uint64_t reserved_32_63               : 32;
#endif
	} s;
	struct cvmx_mio_boot_loc_cfgx_s       cn30xx;
	struct cvmx_mio_boot_loc_cfgx_s       cn31xx;
	struct cvmx_mio_boot_loc_cfgx_s       cn38xx;
	struct cvmx_mio_boot_loc_cfgx_s       cn38xxp2;
	struct cvmx_mio_boot_loc_cfgx_s       cn50xx;
	struct cvmx_mio_boot_loc_cfgx_s       cn52xx;
	struct cvmx_mio_boot_loc_cfgx_s       cn52xxp1;
	struct cvmx_mio_boot_loc_cfgx_s       cn56xx;
	struct cvmx_mio_boot_loc_cfgx_s       cn56xxp1;
	struct cvmx_mio_boot_loc_cfgx_s       cn58xx;
	struct cvmx_mio_boot_loc_cfgx_s       cn58xxp1;
	struct cvmx_mio_boot_loc_cfgx_s       cn61xx;
	struct cvmx_mio_boot_loc_cfgx_s       cn63xx;
	struct cvmx_mio_boot_loc_cfgx_s       cn63xxp1;
	struct cvmx_mio_boot_loc_cfgx_s       cn66xx;
	struct cvmx_mio_boot_loc_cfgx_s       cn68xx;
	struct cvmx_mio_boot_loc_cfgx_s       cn68xxp1;
	struct cvmx_mio_boot_loc_cfgx_s       cnf71xx;
};
typedef union cvmx_mio_boot_loc_cfgx cvmx_mio_boot_loc_cfgx_t;

/**
 * cvmx_mio_boot_loc_dat
 *
 * MIO_BOOT_LOC_DAT = MIO Boot Local Memory Region Data Register
 *
 * This is a pseudo-register that will read/write the local memory region at the address specified by the MIO
 * Boot Local Memory Region Address Register (MIO_BOOT_LOC_ADR) when accessed.
 */
union cvmx_mio_boot_loc_dat {
	uint64_t u64;
	struct cvmx_mio_boot_loc_dat_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t data                         : 64; /**< Local memory region data */
#else
	uint64_t data                         : 64;
#endif
	} s;
	struct cvmx_mio_boot_loc_dat_s        cn30xx;
	struct cvmx_mio_boot_loc_dat_s        cn31xx;
	struct cvmx_mio_boot_loc_dat_s        cn38xx;
	struct cvmx_mio_boot_loc_dat_s        cn38xxp2;
	struct cvmx_mio_boot_loc_dat_s        cn50xx;
	struct cvmx_mio_boot_loc_dat_s        cn52xx;
	struct cvmx_mio_boot_loc_dat_s        cn52xxp1;
	struct cvmx_mio_boot_loc_dat_s        cn56xx;
	struct cvmx_mio_boot_loc_dat_s        cn56xxp1;
	struct cvmx_mio_boot_loc_dat_s        cn58xx;
	struct cvmx_mio_boot_loc_dat_s        cn58xxp1;
	struct cvmx_mio_boot_loc_dat_s        cn61xx;
	struct cvmx_mio_boot_loc_dat_s        cn63xx;
	struct cvmx_mio_boot_loc_dat_s        cn63xxp1;
	struct cvmx_mio_boot_loc_dat_s        cn66xx;
	struct cvmx_mio_boot_loc_dat_s        cn68xx;
	struct cvmx_mio_boot_loc_dat_s        cn68xxp1;
	struct cvmx_mio_boot_loc_dat_s        cnf71xx;
};
typedef union cvmx_mio_boot_loc_dat cvmx_mio_boot_loc_dat_t;

/**
 * cvmx_mio_boot_pin_defs
 *
 * MIO_BOOT_PIN_DEFS = MIO Boot Pin Defaults Register
 *
 */
union cvmx_mio_boot_pin_defs {
	uint64_t u64;
	struct cvmx_mio_boot_pin_defs_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_32_63               : 32;
	uint64_t user1                        : 16; /**< BOOT_AD [31:16] latched during power up */
	uint64_t ale                          : 1;  /**< Region 0 default ALE mode */
	uint64_t width                        : 1;  /**< Region 0 default bus width */
	uint64_t dmack_p2                     : 1;  /**< boot_dmack[2] default polarity */
	uint64_t dmack_p1                     : 1;  /**< boot_dmack[1] default polarity */
	uint64_t dmack_p0                     : 1;  /**< boot_dmack[0] default polarity */
	uint64_t term                         : 2;  /**< Selects default driver termination */
	uint64_t nand                         : 1;  /**< Region 0 is NAND flash */
	uint64_t user0                        : 8;  /**< BOOT_AD [7:0] latched during power up */
#else
	uint64_t user0                        : 8;
	uint64_t nand                         : 1;
	uint64_t term                         : 2;
	uint64_t dmack_p0                     : 1;
	uint64_t dmack_p1                     : 1;
	uint64_t dmack_p2                     : 1;
	uint64_t width                        : 1;
	uint64_t ale                          : 1;
	uint64_t user1                        : 16;
	uint64_t reserved_32_63               : 32;
#endif
	} s;
	struct cvmx_mio_boot_pin_defs_cn52xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_16_63               : 48;
	uint64_t ale                          : 1;  /**< Region 0 default ALE mode */
	uint64_t width                        : 1;  /**< Region 0 default bus width */
	uint64_t reserved_13_13               : 1;
	uint64_t dmack_p1                     : 1;  /**< boot_dmack[1] default polarity */
	uint64_t dmack_p0                     : 1;  /**< boot_dmack[0] default polarity */
	uint64_t term                         : 2;  /**< Selects default driver termination */
	uint64_t nand                         : 1;  /**< Region 0 is NAND flash */
	uint64_t reserved_0_7                 : 8;
#else
	uint64_t reserved_0_7                 : 8;
	uint64_t nand                         : 1;
	uint64_t term                         : 2;
	uint64_t dmack_p0                     : 1;
	uint64_t dmack_p1                     : 1;
	uint64_t reserved_13_13               : 1;
	uint64_t width                        : 1;
	uint64_t ale                          : 1;
	uint64_t reserved_16_63               : 48;
#endif
	} cn52xx;
	struct cvmx_mio_boot_pin_defs_cn56xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_16_63               : 48;
	uint64_t ale                          : 1;  /**< Region 0 default ALE mode */
	uint64_t width                        : 1;  /**< Region 0 default bus width */
	uint64_t dmack_p2                     : 1;  /**< boot_dmack[2] default polarity */
	uint64_t dmack_p1                     : 1;  /**< boot_dmack[1] default polarity */
	uint64_t dmack_p0                     : 1;  /**< boot_dmack[0] default polarity */
	uint64_t term                         : 2;  /**< Selects default driver termination */
	uint64_t reserved_0_8                 : 9;
#else
	uint64_t reserved_0_8                 : 9;
	uint64_t term                         : 2;
	uint64_t dmack_p0                     : 1;
	uint64_t dmack_p1                     : 1;
	uint64_t dmack_p2                     : 1;
	uint64_t width                        : 1;
	uint64_t ale                          : 1;
	uint64_t reserved_16_63               : 48;
#endif
	} cn56xx;
	struct cvmx_mio_boot_pin_defs_cn61xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_32_63               : 32;
	uint64_t user1                        : 16; /**< BOOT_AD [31:16] latched during power up */
	uint64_t ale                          : 1;  /**< Region 0 default ALE mode */
	uint64_t width                        : 1;  /**< Region 0 default bus width */
	uint64_t reserved_13_13               : 1;
	uint64_t dmack_p1                     : 1;  /**< boot_dmack[1] default polarity */
	uint64_t dmack_p0                     : 1;  /**< boot_dmack[0] default polarity */
	uint64_t term                         : 2;  /**< Selects default driver termination */
	uint64_t nand                         : 1;  /**< Region 0 is NAND flash */
	uint64_t user0                        : 8;  /**< BOOT_AD [7:0] latched during power up */
#else
	uint64_t user0                        : 8;
	uint64_t nand                         : 1;
	uint64_t term                         : 2;
	uint64_t dmack_p0                     : 1;
	uint64_t dmack_p1                     : 1;
	uint64_t reserved_13_13               : 1;
	uint64_t width                        : 1;
	uint64_t ale                          : 1;
	uint64_t user1                        : 16;
	uint64_t reserved_32_63               : 32;
#endif
	} cn61xx;
	struct cvmx_mio_boot_pin_defs_cn52xx  cn63xx;
	struct cvmx_mio_boot_pin_defs_cn52xx  cn63xxp1;
	struct cvmx_mio_boot_pin_defs_cn52xx  cn66xx;
	struct cvmx_mio_boot_pin_defs_cn52xx  cn68xx;
	struct cvmx_mio_boot_pin_defs_cn52xx  cn68xxp1;
	struct cvmx_mio_boot_pin_defs_cn61xx  cnf71xx;
};
typedef union cvmx_mio_boot_pin_defs cvmx_mio_boot_pin_defs_t;

/**
 * cvmx_mio_boot_reg_cfg#
 */
union cvmx_mio_boot_reg_cfgx {
	uint64_t u64;
	struct cvmx_mio_boot_reg_cfgx_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_44_63               : 20;
	uint64_t dmack                        : 2;  /**< Region X DMACK */
	uint64_t tim_mult                     : 2;  /**< Region X timing multiplier */
	uint64_t rd_dly                       : 3;  /**< Region X read sample delay */
	uint64_t sam                          : 1;  /**< Region X SAM mode */
	uint64_t we_ext                       : 2;  /**< Region X write enable count extension */
	uint64_t oe_ext                       : 2;  /**< Region X output enable count extension */
	uint64_t en                           : 1;  /**< Region X enable */
	uint64_t orbit                        : 1;  /**< Region X or bit */
	uint64_t ale                          : 1;  /**< Region X ALE mode */
	uint64_t width                        : 1;  /**< Region X bus width */
	uint64_t size                         : 12; /**< Region X size */
	uint64_t base                         : 16; /**< Region X base address */
#else
	uint64_t base                         : 16;
	uint64_t size                         : 12;
	uint64_t width                        : 1;
	uint64_t ale                          : 1;
	uint64_t orbit                        : 1;
	uint64_t en                           : 1;
	uint64_t oe_ext                       : 2;
	uint64_t we_ext                       : 2;
	uint64_t sam                          : 1;
	uint64_t rd_dly                       : 3;
	uint64_t tim_mult                     : 2;
	uint64_t dmack                        : 2;
	uint64_t reserved_44_63               : 20;
#endif
	} s;
	struct cvmx_mio_boot_reg_cfgx_cn30xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_37_63               : 27;
	uint64_t sam                          : 1;  /**< Region X SAM mode */
	uint64_t we_ext                       : 2;  /**< Region X write enable count extension */
	uint64_t oe_ext                       : 2;  /**< Region X output enable count extension */
	uint64_t en                           : 1;  /**< Region X enable */
	uint64_t orbit                        : 1;  /**< Region X or bit */
	uint64_t ale                          : 1;  /**< Region X ALE mode */
	uint64_t width                        : 1;  /**< Region X bus width */
	uint64_t size                         : 12; /**< Region X size */
	uint64_t base                         : 16; /**< Region X base address */
#else
	uint64_t base                         : 16;
	uint64_t size                         : 12;
	uint64_t width                        : 1;
	uint64_t ale                          : 1;
	uint64_t orbit                        : 1;
	uint64_t en                           : 1;
	uint64_t oe_ext                       : 2;
	uint64_t we_ext                       : 2;
	uint64_t sam                          : 1;
	uint64_t reserved_37_63               : 27;
#endif
	} cn30xx;
	struct cvmx_mio_boot_reg_cfgx_cn30xx  cn31xx;
	struct cvmx_mio_boot_reg_cfgx_cn38xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_32_63               : 32;
	uint64_t en                           : 1;  /**< Region X enable */
	uint64_t orbit                        : 1;  /**< Region X or bit */
	uint64_t reserved_28_29               : 2;
	uint64_t size                         : 12; /**< Region X size */
	uint64_t base                         : 16; /**< Region X base address */
#else
	uint64_t base                         : 16;
	uint64_t size                         : 12;
	uint64_t reserved_28_29               : 2;
	uint64_t orbit                        : 1;
	uint64_t en                           : 1;
	uint64_t reserved_32_63               : 32;
#endif
	} cn38xx;
	struct cvmx_mio_boot_reg_cfgx_cn38xx  cn38xxp2;
	struct cvmx_mio_boot_reg_cfgx_cn50xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_42_63               : 22;
	uint64_t tim_mult                     : 2;  /**< Region X timing multiplier */
	uint64_t rd_dly                       : 3;  /**< Region X read sample delay */
	uint64_t sam                          : 1;  /**< Region X SAM mode */
	uint64_t we_ext                       : 2;  /**< Region X write enable count extension */
	uint64_t oe_ext                       : 2;  /**< Region X output enable count extension */
	uint64_t en                           : 1;  /**< Region X enable */
	uint64_t orbit                        : 1;  /**< Region X or bit */
	uint64_t ale                          : 1;  /**< Region X ALE mode */
	uint64_t width                        : 1;  /**< Region X bus width */
	uint64_t size                         : 12; /**< Region X size */
	uint64_t base                         : 16; /**< Region X base address */
#else
	uint64_t base                         : 16;
	uint64_t size                         : 12;
	uint64_t width                        : 1;
	uint64_t ale                          : 1;
	uint64_t orbit                        : 1;
	uint64_t en                           : 1;
	uint64_t oe_ext                       : 2;
	uint64_t we_ext                       : 2;
	uint64_t sam                          : 1;
	uint64_t rd_dly                       : 3;
	uint64_t tim_mult                     : 2;
	uint64_t reserved_42_63               : 22;
#endif
	} cn50xx;
	struct cvmx_mio_boot_reg_cfgx_s       cn52xx;
	struct cvmx_mio_boot_reg_cfgx_s       cn52xxp1;
	struct cvmx_mio_boot_reg_cfgx_s       cn56xx;
	struct cvmx_mio_boot_reg_cfgx_s       cn56xxp1;
	struct cvmx_mio_boot_reg_cfgx_cn30xx  cn58xx;
	struct cvmx_mio_boot_reg_cfgx_cn30xx  cn58xxp1;
	struct cvmx_mio_boot_reg_cfgx_s       cn61xx;
	struct cvmx_mio_boot_reg_cfgx_s       cn63xx;
	struct cvmx_mio_boot_reg_cfgx_s       cn63xxp1;
	struct cvmx_mio_boot_reg_cfgx_s       cn66xx;
	struct cvmx_mio_boot_reg_cfgx_s       cn68xx;
	struct cvmx_mio_boot_reg_cfgx_s       cn68xxp1;
	struct cvmx_mio_boot_reg_cfgx_s       cnf71xx;
};
typedef union cvmx_mio_boot_reg_cfgx cvmx_mio_boot_reg_cfgx_t;

/**
 * cvmx_mio_boot_reg_tim#
 */
union cvmx_mio_boot_reg_timx {
	uint64_t u64;
	struct cvmx_mio_boot_reg_timx_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t pagem                        : 1;  /**< Region X page mode */
	uint64_t waitm                        : 1;  /**< Region X wait mode */
	uint64_t pages                        : 2;  /**< Region X page size */
	uint64_t ale                          : 6;  /**< Region X ALE count */
	uint64_t page                         : 6;  /**< Region X page count */
	uint64_t wait                         : 6;  /**< Region X wait count */
	uint64_t pause                        : 6;  /**< Region X pause count */
	uint64_t wr_hld                       : 6;  /**< Region X write hold count */
	uint64_t rd_hld                       : 6;  /**< Region X read hold count */
	uint64_t we                           : 6;  /**< Region X write enable count */
	uint64_t oe                           : 6;  /**< Region X output enable count */
	uint64_t ce                           : 6;  /**< Region X chip enable count */
	uint64_t adr                          : 6;  /**< Region X address count */
#else
	uint64_t adr                          : 6;
	uint64_t ce                           : 6;
	uint64_t oe                           : 6;
	uint64_t we                           : 6;
	uint64_t rd_hld                       : 6;
	uint64_t wr_hld                       : 6;
	uint64_t pause                        : 6;
	uint64_t wait                         : 6;
	uint64_t page                         : 6;
	uint64_t ale                          : 6;
	uint64_t pages                        : 2;
	uint64_t waitm                        : 1;
	uint64_t pagem                        : 1;
#endif
	} s;
	struct cvmx_mio_boot_reg_timx_s       cn30xx;
	struct cvmx_mio_boot_reg_timx_s       cn31xx;
	struct cvmx_mio_boot_reg_timx_cn38xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t pagem                        : 1;  /**< Region X page mode */
	uint64_t waitm                        : 1;  /**< Region X wait mode */
	uint64_t pages                        : 2;  /**< Region X page size (NOT IN PASS 1) */
	uint64_t reserved_54_59               : 6;
	uint64_t page                         : 6;  /**< Region X page count */
	uint64_t wait                         : 6;  /**< Region X wait count */
	uint64_t pause                        : 6;  /**< Region X pause count */
	uint64_t wr_hld                       : 6;  /**< Region X write hold count */
	uint64_t rd_hld                       : 6;  /**< Region X read hold count */
	uint64_t we                           : 6;  /**< Region X write enable count */
	uint64_t oe                           : 6;  /**< Region X output enable count */
	uint64_t ce                           : 6;  /**< Region X chip enable count */
	uint64_t adr                          : 6;  /**< Region X address count */
#else
	uint64_t adr                          : 6;
	uint64_t ce                           : 6;
	uint64_t oe                           : 6;
	uint64_t we                           : 6;
	uint64_t rd_hld                       : 6;
	uint64_t wr_hld                       : 6;
	uint64_t pause                        : 6;
	uint64_t wait                         : 6;
	uint64_t page                         : 6;
	uint64_t reserved_54_59               : 6;
	uint64_t pages                        : 2;
	uint64_t waitm                        : 1;
	uint64_t pagem                        : 1;
#endif
	} cn38xx;
	struct cvmx_mio_boot_reg_timx_cn38xx  cn38xxp2;
	struct cvmx_mio_boot_reg_timx_s       cn50xx;
	struct cvmx_mio_boot_reg_timx_s       cn52xx;
	struct cvmx_mio_boot_reg_timx_s       cn52xxp1;
	struct cvmx_mio_boot_reg_timx_s       cn56xx;
	struct cvmx_mio_boot_reg_timx_s       cn56xxp1;
	struct cvmx_mio_boot_reg_timx_s       cn58xx;
	struct cvmx_mio_boot_reg_timx_s       cn58xxp1;
	struct cvmx_mio_boot_reg_timx_s       cn61xx;
	struct cvmx_mio_boot_reg_timx_s       cn63xx;
	struct cvmx_mio_boot_reg_timx_s       cn63xxp1;
	struct cvmx_mio_boot_reg_timx_s       cn66xx;
	struct cvmx_mio_boot_reg_timx_s       cn68xx;
	struct cvmx_mio_boot_reg_timx_s       cn68xxp1;
	struct cvmx_mio_boot_reg_timx_s       cnf71xx;
};
typedef union cvmx_mio_boot_reg_timx cvmx_mio_boot_reg_timx_t;

/**
 * cvmx_mio_boot_thr
 *
 * MIO_BOOT_THR = MIO Boot Threshold Register
 *
 * Contains MIO Boot threshold values:
 *
 * FIF_THR = Assert ncb__busy when the Boot NCB input FIFO reaches this level (not typically for
 *           customer use).
 *
 * DMA_THR = When non-DMA accesses are pending, perform a DMA access after this value of non-DMA
 *           accesses have completed.  If set to zero, only perform a DMA access when non-DMA
 *           accesses are not pending.
 */
union cvmx_mio_boot_thr {
	uint64_t u64;
	struct cvmx_mio_boot_thr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_22_63               : 42;
	uint64_t dma_thr                      : 6;  /**< DMA threshold */
	uint64_t reserved_14_15               : 2;
	uint64_t fif_cnt                      : 6;  /**< Current NCB FIFO count */
	uint64_t reserved_6_7                 : 2;
	uint64_t fif_thr                      : 6;  /**< NCB busy threshold */
#else
	uint64_t fif_thr                      : 6;
	uint64_t reserved_6_7                 : 2;
	uint64_t fif_cnt                      : 6;
	uint64_t reserved_14_15               : 2;
	uint64_t dma_thr                      : 6;
	uint64_t reserved_22_63               : 42;
#endif
	} s;
	struct cvmx_mio_boot_thr_cn30xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_14_63               : 50;
	uint64_t fif_cnt                      : 6;  /**< Current NCB FIFO count */
	uint64_t reserved_6_7                 : 2;
	uint64_t fif_thr                      : 6;  /**< NCB busy threshold */
#else
	uint64_t fif_thr                      : 6;
	uint64_t reserved_6_7                 : 2;
	uint64_t fif_cnt                      : 6;
	uint64_t reserved_14_63               : 50;
#endif
	} cn30xx;
	struct cvmx_mio_boot_thr_cn30xx       cn31xx;
	struct cvmx_mio_boot_thr_cn30xx       cn38xx;
	struct cvmx_mio_boot_thr_cn30xx       cn38xxp2;
	struct cvmx_mio_boot_thr_cn30xx       cn50xx;
	struct cvmx_mio_boot_thr_s            cn52xx;
	struct cvmx_mio_boot_thr_s            cn52xxp1;
	struct cvmx_mio_boot_thr_s            cn56xx;
	struct cvmx_mio_boot_thr_s            cn56xxp1;
	struct cvmx_mio_boot_thr_cn30xx       cn58xx;
	struct cvmx_mio_boot_thr_cn30xx       cn58xxp1;
	struct cvmx_mio_boot_thr_s            cn61xx;
	struct cvmx_mio_boot_thr_s            cn63xx;
	struct cvmx_mio_boot_thr_s            cn63xxp1;
	struct cvmx_mio_boot_thr_s            cn66xx;
	struct cvmx_mio_boot_thr_s            cn68xx;
	struct cvmx_mio_boot_thr_s            cn68xxp1;
	struct cvmx_mio_boot_thr_s            cnf71xx;
};
typedef union cvmx_mio_boot_thr cvmx_mio_boot_thr_t;

/**
 * cvmx_mio_emm_buf_dat
 *
 * MIO_EMM_BUF_DAT = MIO EMMC Data buffer access Register
 *
 */
union cvmx_mio_emm_buf_dat {
	uint64_t u64;
	struct cvmx_mio_emm_buf_dat_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t dat                          : 64; /**< Direct access to the 1KB data buffer memory.    Address
                                                         specified by MIO_EMM_BUF_IDX */
#else
	uint64_t dat                          : 64;
#endif
	} s;
	struct cvmx_mio_emm_buf_dat_s         cn61xx;
	struct cvmx_mio_emm_buf_dat_s         cnf71xx;
};
typedef union cvmx_mio_emm_buf_dat cvmx_mio_emm_buf_dat_t;

/**
 * cvmx_mio_emm_buf_idx
 *
 * MIO_EMM_BUF_IDX = MIO EMMC Data buffer address Register
 *
 */
union cvmx_mio_emm_buf_idx {
	uint64_t u64;
	struct cvmx_mio_emm_buf_idx_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_17_63               : 47;
	uint64_t inc                          : 1;  /**< Automatically advance BUF_SEL/OFFSET after each access to
                                                         MIO_EMM_BUF_DAT.   Wraps after last offset of last data buffer. */
	uint64_t reserved_7_15                : 9;
	uint64_t buf_num                      : 1;  /**< Specify the data buffer for the next access to MIO_EMM_BUF_DAT */
	uint64_t offset                       : 6;  /**< Specify the 8B data buffer offset for the next access to
                                                         MIO_EMM_BUF_DAT */
#else
	uint64_t offset                       : 6;
	uint64_t buf_num                      : 1;
	uint64_t reserved_7_15                : 9;
	uint64_t inc                          : 1;
	uint64_t reserved_17_63               : 47;
#endif
	} s;
	struct cvmx_mio_emm_buf_idx_s         cn61xx;
	struct cvmx_mio_emm_buf_idx_s         cnf71xx;
};
typedef union cvmx_mio_emm_buf_idx cvmx_mio_emm_buf_idx_t;

/**
 * cvmx_mio_emm_cfg
 *
 * MIO_EMM_CFG = MIO EMMC Configuration Register
 *
 */
union cvmx_mio_emm_cfg {
	uint64_t u64;
	struct cvmx_mio_emm_cfg_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_17_63               : 47;
	uint64_t boot_fail                    : 1;  /**< SW should set BOOT_FAIL when an unrecoverable error occurs
                                                         while attempt to boot from eMMC or NOR Flash.   When set, the
                                                         following pattern will be output:
                                                           BOOT_AD[7:0] pulled up to 1
                                                           BOOT_CE_N[7:0] driven to 1
                                                           BOOT_ALE driven to 0
                                                           BOOT_OE_L driven to 1
                                                           BOOT_WE_L driven to 1 */
	uint64_t reserved_4_15                : 12;
	uint64_t bus_ena                      : 4;  /**< eMMC bus enable mask.

                                                         Setting bit0 of BUS_ENA causes BOOT_CE[1] to become dedicated
                                                         eMMC bus 0 command (ie. disabling any NOR use)

                                                         Setting bit1 of BUS_ENA causes BOOT_CE[2] to become dedicated
                                                         eMMC bus 1 command (ie. disabling any NOR use).

                                                         Setting bit2 of BUS_ENA causes BOOT_CE[3] to become dedicated
                                                         eMMC bus 2 command (ie. disabling any NOR use).

                                                         Setting bit3 of BUS_ENA causes BOOT_CE[4] to become dedicated
                                                         eMMC bus 3 command (ie. disabling any NOR use).

                                                         Setting any bit of BUS_ENA causes BOOT_CE[5] to become the eMMC
                                                         clock for both bus0 and bus1. */
#else
	uint64_t bus_ena                      : 4;
	uint64_t reserved_4_15                : 12;
	uint64_t boot_fail                    : 1;
	uint64_t reserved_17_63               : 47;
#endif
	} s;
	struct cvmx_mio_emm_cfg_s             cn61xx;
	struct cvmx_mio_emm_cfg_s             cnf71xx;
};
typedef union cvmx_mio_emm_cfg cvmx_mio_emm_cfg_t;

/**
 * cvmx_mio_emm_cmd
 *
 * MIO_EMM_CMD = MIO EMMC Command Register
 *
 */
union cvmx_mio_emm_cmd {
	uint64_t u64;
	struct cvmx_mio_emm_cmd_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_62_63               : 2;
	uint64_t bus_id                       : 2;  /**< Specify the eMMC bus */
	uint64_t cmd_val                      : 1;  /**< Request valid.  SW writes this bit to a 1.   HW clears it when
                                                         the operation completes. */
	uint64_t reserved_56_58               : 3;
	uint64_t dbuf                         : 1;  /**< Specify the data buffer to be used for a block transfer. */
	uint64_t offset                       : 6;  /**< Debug only.  Specify the number of 8 byte transfers in the
                                                         used in the command.  Value is 64-OFFSET.  The block transfer
                                                         will still start at the first btye in the 512B data buffer.
                                                         SW must ensure CMD16 has updated the card block length. */
	uint64_t reserved_43_48               : 6;
	uint64_t ctype_xor                    : 2;  /**< Reserved. Must be zero */
	uint64_t rtype_xor                    : 3;  /**< Reserved. Must be zero */
	uint64_t cmd_idx                      : 6;  /**< eMMC command */
	uint64_t arg                          : 32; /**< eMMC command argument */
#else
	uint64_t arg                          : 32;
	uint64_t cmd_idx                      : 6;
	uint64_t rtype_xor                    : 3;
	uint64_t ctype_xor                    : 2;
	uint64_t reserved_43_48               : 6;
	uint64_t offset                       : 6;
	uint64_t dbuf                         : 1;
	uint64_t reserved_56_58               : 3;
	uint64_t cmd_val                      : 1;
	uint64_t bus_id                       : 2;
	uint64_t reserved_62_63               : 2;
#endif
	} s;
	struct cvmx_mio_emm_cmd_s             cn61xx;
	struct cvmx_mio_emm_cmd_s             cnf71xx;
};
typedef union cvmx_mio_emm_cmd cvmx_mio_emm_cmd_t;

/**
 * cvmx_mio_emm_dma
 *
 * MIO_EMM_DMA = MIO EMMC DMA config Register
 *
 */
union cvmx_mio_emm_dma {
	uint64_t u64;
	struct cvmx_mio_emm_dma_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_62_63               : 2;
	uint64_t bus_id                       : 2;  /**< Specify the eMMC bus */
	uint64_t dma_val                      : 1;  /**< SW writes this bit to a 1 to indicate that HW should perform
                                                         the DMA transfer.   HW clears when DMA operation completes or
                                                         is terminated. */
	uint64_t sector                       : 1;  /**< Specify CARD_ADDR and eMMC are using sector (512B) addressing. */
	uint64_t dat_null                     : 1;  /**< Do not perform any eMMC commands.   A DMA read will return all
                                                         0s.  A DMA write tosses the data.  In the case of a failure,
                                                         this can be used to unwind the DMA engine. */
	uint64_t thres                        : 6;  /**< Number of 8B blocks of data that must exist in the DBUF before
                                                         the starting the 512B block transfer.  0 indicates to wait for
                                                         the entire block. */
	uint64_t rel_wr                       : 1;  /**< Set the reliable write parameter when performing CMD23
                                                         (SET_BLOCK_COUNT) for a multiple block */
	uint64_t rw                           : 1;  /**< R/W bit (0 = read, 1 = write) */
	uint64_t multi                        : 1;  /**< Perform operation using a multiple block command instead of a
                                                         series of single block commands. */
	uint64_t block_cnt                    : 16; /**< Number of blocks to read/write.  Hardware decrements the block
                                                         count after each successful block transfer. */
	uint64_t card_addr                    : 32; /**< Data address for media =<2GB is a 32bit byte address and data
                                                         address for media > 2GB is a 32bit sector (512B) address.
                                                         Hardware advances the card address after each successful block
                                                         transfer by 512 for byte addressing and by 1 for sector
                                                         addressing. */
#else
	uint64_t card_addr                    : 32;
	uint64_t block_cnt                    : 16;
	uint64_t multi                        : 1;
	uint64_t rw                           : 1;
	uint64_t rel_wr                       : 1;
	uint64_t thres                        : 6;
	uint64_t dat_null                     : 1;
	uint64_t sector                       : 1;
	uint64_t dma_val                      : 1;
	uint64_t bus_id                       : 2;
	uint64_t reserved_62_63               : 2;
#endif
	} s;
	struct cvmx_mio_emm_dma_s             cn61xx;
	struct cvmx_mio_emm_dma_s             cnf71xx;
};
typedef union cvmx_mio_emm_dma cvmx_mio_emm_dma_t;

/**
 * cvmx_mio_emm_int
 *
 * MIO_EMM_INT = MIO EMMC Interrupt Register
 *
 */
union cvmx_mio_emm_int {
	uint64_t u64;
	struct cvmx_mio_emm_int_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_7_63                : 57;
	uint64_t switch_err                   : 1;  /**< Switch operation encountered an error. */
	uint64_t switch_done                  : 1;  /**< Switch operation completed successfully */
	uint64_t dma_err                      : 1;  /**< DMA transfer encountered an error.   See MIO_EMM_RSP. */
	uint64_t cmd_err                      : 1;  /**< Operation specified by MIO_EMM_CMD encountered an error.  See
                                                         MIO_EMM_RSP. */
	uint64_t dma_done                     : 1;  /**< DMA transfer completed successfully */
	uint64_t cmd_done                     : 1;  /**< Operation specified by MIO_EMM_CMD completed successfully */
	uint64_t buf_done                     : 1;  /**< The next 512B block transfer of a multi-block transfer has
                                                         completed. */
#else
	uint64_t buf_done                     : 1;
	uint64_t cmd_done                     : 1;
	uint64_t dma_done                     : 1;
	uint64_t cmd_err                      : 1;
	uint64_t dma_err                      : 1;
	uint64_t switch_done                  : 1;
	uint64_t switch_err                   : 1;
	uint64_t reserved_7_63                : 57;
#endif
	} s;
	struct cvmx_mio_emm_int_s             cn61xx;
	struct cvmx_mio_emm_int_s             cnf71xx;
};
typedef union cvmx_mio_emm_int cvmx_mio_emm_int_t;

/**
 * cvmx_mio_emm_int_en
 *
 * MIO_EMM_INT_EN = MIO EMMC Interrupt enable Register
 *
 */
union cvmx_mio_emm_int_en {
	uint64_t u64;
	struct cvmx_mio_emm_int_en_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_7_63                : 57;
	uint64_t switch_err                   : 1;  /**< Switch operation encountered an error. */
	uint64_t switch_done                  : 1;  /**< Switch operation completed. */
	uint64_t dma_err                      : 1;  /**< DMA transfer encountered an error.   See MIO_EMM_RSP. */
	uint64_t cmd_err                      : 1;  /**< Operation specified by MIO_EMM_CMD encountered an error.  See
                                                         MIO_EMM_RSP. */
	uint64_t dma_done                     : 1;  /**< DMA transfer completed */
	uint64_t cmd_done                     : 1;  /**< Operation specified by MIO_EMM_CMD completed */
	uint64_t buf_done                     : 1;  /**< The next 512B block transfer of a multi-block transfer has
                                                         completed. */
#else
	uint64_t buf_done                     : 1;
	uint64_t cmd_done                     : 1;
	uint64_t dma_done                     : 1;
	uint64_t cmd_err                      : 1;
	uint64_t dma_err                      : 1;
	uint64_t switch_done                  : 1;
	uint64_t switch_err                   : 1;
	uint64_t reserved_7_63                : 57;
#endif
	} s;
	struct cvmx_mio_emm_int_en_s          cn61xx;
	struct cvmx_mio_emm_int_en_s          cnf71xx;
};
typedef union cvmx_mio_emm_int_en cvmx_mio_emm_int_en_t;

/**
 * cvmx_mio_emm_mode#
 *
 * MIO_EMM_MODE = MIO EMMC Operating mode Register
 *
 */
union cvmx_mio_emm_modex {
	uint64_t u64;
	struct cvmx_mio_emm_modex_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_49_63               : 15;
	uint64_t hs_timing                    : 1;  /**< Current high speed timing mode.   Required when CLK frequency
                                                         higher than 20MHz. */
	uint64_t reserved_43_47               : 5;
	uint64_t bus_width                    : 3;  /**< Current card bus mode.  Out of reset, the card is in 1 bit data
                                                         bus mode.   Select bus width.

                                                         0 - 1 bit data bus (power on)
                                                         1 - 4 bit data bus
                                                         2 - 8 bit data bus
                                                         5 - 4 bit data bus (dual data rate)
                                                         6 - 8 bit data bus (dual data rate) */
	uint64_t reserved_36_39               : 4;
	uint64_t power_class                  : 4;  /**< Out of reset, the card power class is 0, which is the minimum
                                                         current consumption class for the card.  EXT_CSD bytes
                                                         [203:200] and [239:238] contain the power class for different
                                                         BUS_WITDH and CLK frequencies.  Software should write this
                                                         field with the  4-bit field from the EXT_CSD bytes
                                                         corresponding to the selected operating mode. */
	uint64_t clk_hi                       : 16; /**< Current number of sclk cycles to hold the eMMC CLK pin high */
	uint64_t clk_lo                       : 16; /**< Current number of sclk cycles to hold the eMMC CLK pin low. */
#else
	uint64_t clk_lo                       : 16;
	uint64_t clk_hi                       : 16;
	uint64_t power_class                  : 4;
	uint64_t reserved_36_39               : 4;
	uint64_t bus_width                    : 3;
	uint64_t reserved_43_47               : 5;
	uint64_t hs_timing                    : 1;
	uint64_t reserved_49_63               : 15;
#endif
	} s;
	struct cvmx_mio_emm_modex_s           cn61xx;
	struct cvmx_mio_emm_modex_s           cnf71xx;
};
typedef union cvmx_mio_emm_modex cvmx_mio_emm_modex_t;

/**
 * cvmx_mio_emm_rca
 */
union cvmx_mio_emm_rca {
	uint64_t u64;
	struct cvmx_mio_emm_rca_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_16_63               : 48;
	uint64_t card_rca                     : 16; /**< Whenever SW performs CMD7, HW will update CARD_RCA with the
                                                         relative card address from the MIO_EMM_CMD[ARG] unless the
                                                         operations encounters an error. */
#else
	uint64_t card_rca                     : 16;
	uint64_t reserved_16_63               : 48;
#endif
	} s;
	struct cvmx_mio_emm_rca_s             cn61xx;
	struct cvmx_mio_emm_rca_s             cnf71xx;
};
typedef union cvmx_mio_emm_rca cvmx_mio_emm_rca_t;

/**
 * cvmx_mio_emm_rsp_hi
 *
 * MIO_EMM_RSP_HI = MIO EMMC Response data high Register
 *
 */
union cvmx_mio_emm_rsp_hi {
	uint64_t u64;
	struct cvmx_mio_emm_rsp_hi_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t dat                          : 64; /**< Command response (as per JEDEC eMMC spec)

                                                         RSP_TYPE=1 - DAT[63:0] - 0x0
                                                         RSP_TYPE=2 - DAT[63:0] - CID[127:64] or CSD[127:64]
                                                         RSP_TYPE=3 - DAT[63:0] - 0x0
                                                         RSP_TYPE=4 - DAT[63:0] - 0x0
                                                         RSP_TYPE=5 - DAT[63:0] - 0x0 */
#else
	uint64_t dat                          : 64;
#endif
	} s;
	struct cvmx_mio_emm_rsp_hi_s          cn61xx;
	struct cvmx_mio_emm_rsp_hi_s          cnf71xx;
};
typedef union cvmx_mio_emm_rsp_hi cvmx_mio_emm_rsp_hi_t;

/**
 * cvmx_mio_emm_rsp_lo
 *
 * MIO_EMM_RSP_LO = MIO EMMC Response data low Register
 *
 */
union cvmx_mio_emm_rsp_lo {
	uint64_t u64;
	struct cvmx_mio_emm_rsp_lo_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t dat                          : 64; /**< Command response (as per JEDEC eMMC spec)

                                                         RSP_TYPE = 1
                                                                 DAT[63:46] - 0x0
                                                                 DAT[45:40] - Command index
                                                                 DAT[39: 8] - Card status
                                                                 DAT[ 7: 1] - CRC7
                                                                 DAT[    0] - End bit

                                                         RSP_TYPE = 2
                                                                 DAT[63: 1] - CID[63:1] or CSD[63:1] including CRC
                                                                 DAT[    0] - End bit

                                                         RSP_TYPE = 3
                                                                 DAT[63:46] - 0x0
                                                                 DAT[45:40] - Check bits (0x3f)
                                                                 DAT[39: 8] - OCR register
                                                                 DAT[ 7: 1] - Check bits (0x7f)
                                                                 DAT[    0] - End bit

                                                         RSP_TYPE = 4
                                                                 DAT[63:46] - 0x0
                                                                 DAT[45:40] - CMD39 ('10111')
                                                                 DAT[39:24] - RCA[31:16]
                                                                 DAT[   23] - Status
                                                                 DAT[22:16] - Register address
                                                                 DAT[15: 8] - Register contents
                                                                 DAT[ 7: 1] - CRC7
                                                                 DAT[    0] - End bit

                                                         RSP_TYPE = 5
                                                                 DAT[63:46] - 0x0
                                                                 DAT[45:40] - CMD40 ('10100')
                                                                 DAT[39:24] - RCA[31:16]
                                                                 DAT[   23] - Status
                                                                 DAT[22:16] - Register address
                                                                 DAT[15: 8] - Not defined.  May be used for IRQ data
                                                                 DAT[ 7: 1] - CRC7
                                                                 DAT[    0] - End bit */
#else
	uint64_t dat                          : 64;
#endif
	} s;
	struct cvmx_mio_emm_rsp_lo_s          cn61xx;
	struct cvmx_mio_emm_rsp_lo_s          cnf71xx;
};
typedef union cvmx_mio_emm_rsp_lo cvmx_mio_emm_rsp_lo_t;

/**
 * cvmx_mio_emm_rsp_sts
 *
 * MIO_EMM_RSP_STS = MIO EMMC Response status Register
 *
 */
union cvmx_mio_emm_rsp_sts {
	uint64_t u64;
	struct cvmx_mio_emm_rsp_sts_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_62_63               : 2;
	uint64_t bus_id                       : 2;  /**< eMMC bus id to which the response status corresponds. */
	uint64_t cmd_val                      : 1;  /**< Read-only copy of MIO_EMM_CMD[CMD_VAL].  CMD_VAL=1 indicates a
                                                         direct operation is in progress. */
	uint64_t switch_val                   : 1;  /**< Read-only copy of MIO_EMM_SWITCH[SWITCH_EXE].   SWITCH_VAL=1
                                                         indicates a switch operation is in progress. */
	uint64_t dma_val                      : 1;  /**< Read-only copy of MIO_EMM_DMA[DMA_VAL].   DMA_VAL=1 indicates a
                                                         DMA operation is in progress. */
	uint64_t dma_pend                     : 1;  /**< The DMA engine has a pending transfer resulting from an error.
                                                         SW can resume the transfer by writing MIO_EMM_DMA[DMA_VAL]=1.
                                                         SW can terminate the transfer by writing MIO_EMM_DMA[DMA_VAL]=1
                                                         and MIO_EMM_DMA[NULL]=1.   HW will clear DMA_PEND and perform
                                                         the DMA operation */
	uint64_t reserved_29_55               : 27;
	uint64_t dbuf_err                     : 1;  /**< For CMD_TYPE=1, indicates a DMA read data arrived from card
                                                         without a free DBUF.

                                                         For CMD_TYPE=2, indicates a DBUF underflow occurred during a
                                                         DMA write.    See MIO_EMM_DMA[THRES]. */
	uint64_t reserved_24_27               : 4;
	uint64_t dbuf                         : 1;  /**< DBUF corresponding to the most recently attempted block
                                                         transfer. */
	uint64_t blk_timeout                  : 1;  /**< Timeout waiting for read data or 3bit CRC token */
	uint64_t blk_crc_err                  : 1;  /**< For CMD_TYPE=1, indicates a card read data CRC mismatch.
                                                         MIO_EMM_RSP_STS[DBUF] indicates the failing data buffer.

                                                         For CMD_TYPE=2, indicates card returned 3-bit CRC status token
                                                         indicating the card encountered a write data CRC check
                                                         mismatch.  MIO_EMM_RSP_STS[DBUF] indicates the failing data
                                                         buffer. */
	uint64_t rsp_busybit                  : 1;  /**< Debug only.  eMMC protocol utilizes DAT0 as a busy signal
                                                         during block writes and R1b responses. */
	uint64_t stp_timeout                  : 1;  /**< Stop transmission response timeout. */
	uint64_t stp_crc_err                  : 1;  /**< Stop transmission response had a CRC error */
	uint64_t stp_bad_sts                  : 1;  /**< Stop transmission response had bad status. */
	uint64_t stp_val                      : 1;  /**< Stop transmission response valid. */
	uint64_t rsp_timeout                  : 1;  /**< Response timeout */
	uint64_t rsp_crc_err                  : 1;  /**< Response CRC error */
	uint64_t rsp_bad_sts                  : 1;  /**< Response bad status */
	uint64_t rsp_val                      : 1;  /**< Response id.   See MIO_EMM_RSP_HI/LO */
	uint64_t rsp_type                     : 3;  /**< Indicates the response type. See MIO_EMM_RSP_HI/LO */
	uint64_t cmd_type                     : 2;  /**< eMMC command type (0=no data, 1=read, 2=write) */
	uint64_t cmd_idx                      : 6;  /**< eMMC command index most recently attempted */
	uint64_t cmd_done                     : 1;  /**< eMMC command completed.   Once the command has complete, the
                                                         status is final and can be examined by SW. */
#else
	uint64_t cmd_done                     : 1;
	uint64_t cmd_idx                      : 6;
	uint64_t cmd_type                     : 2;
	uint64_t rsp_type                     : 3;
	uint64_t rsp_val                      : 1;
	uint64_t rsp_bad_sts                  : 1;
	uint64_t rsp_crc_err                  : 1;
	uint64_t rsp_timeout                  : 1;
	uint64_t stp_val                      : 1;
	uint64_t stp_bad_sts                  : 1;
	uint64_t stp_crc_err                  : 1;
	uint64_t stp_timeout                  : 1;
	uint64_t rsp_busybit                  : 1;
	uint64_t blk_crc_err                  : 1;
	uint64_t blk_timeout                  : 1;
	uint64_t dbuf                         : 1;
	uint64_t reserved_24_27               : 4;
	uint64_t dbuf_err                     : 1;
	uint64_t reserved_29_55               : 27;
	uint64_t dma_pend                     : 1;
	uint64_t dma_val                      : 1;
	uint64_t switch_val                   : 1;
	uint64_t cmd_val                      : 1;
	uint64_t bus_id                       : 2;
	uint64_t reserved_62_63               : 2;
#endif
	} s;
	struct cvmx_mio_emm_rsp_sts_s         cn61xx;
	struct cvmx_mio_emm_rsp_sts_s         cnf71xx;
};
typedef union cvmx_mio_emm_rsp_sts cvmx_mio_emm_rsp_sts_t;

/**
 * cvmx_mio_emm_sample
 */
union cvmx_mio_emm_sample {
	uint64_t u64;
	struct cvmx_mio_emm_sample_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_26_63               : 38;
	uint64_t cmd_cnt                      : 10; /**< Number of SCLK cycles before the eMMC clock edge to sample the
                                                         command pin. */
	uint64_t reserved_10_15               : 6;
	uint64_t dat_cnt                      : 10; /**< Number of SCLK cycles before the eMMC clock rising edge to
                                                         sample the data pin. */
#else
	uint64_t dat_cnt                      : 10;
	uint64_t reserved_10_15               : 6;
	uint64_t cmd_cnt                      : 10;
	uint64_t reserved_26_63               : 38;
#endif
	} s;
	struct cvmx_mio_emm_sample_s          cn61xx;
	struct cvmx_mio_emm_sample_s          cnf71xx;
};
typedef union cvmx_mio_emm_sample cvmx_mio_emm_sample_t;

/**
 * cvmx_mio_emm_sts_mask
 */
union cvmx_mio_emm_sts_mask {
	uint64_t u64;
	struct cvmx_mio_emm_sts_mask_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_32_63               : 32;
	uint64_t sts_msk                      : 32; /**< Any bit set in STS_MSK causes the corresponding bit in the card
                                                         status to be considered when computing response bad status. */
#else
	uint64_t sts_msk                      : 32;
	uint64_t reserved_32_63               : 32;
#endif
	} s;
	struct cvmx_mio_emm_sts_mask_s        cn61xx;
	struct cvmx_mio_emm_sts_mask_s        cnf71xx;
};
typedef union cvmx_mio_emm_sts_mask cvmx_mio_emm_sts_mask_t;

/**
 * cvmx_mio_emm_switch
 *
 * MIO_EMM_SWITCH = MIO EMMC Operating mode switch Register
 *
 */
union cvmx_mio_emm_switch {
	uint64_t u64;
	struct cvmx_mio_emm_switch_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_62_63               : 2;
	uint64_t bus_id                       : 2;  /**< Specify the eMMC bus */
	uint64_t switch_exe                   : 1;  /**< When SWITCH_EXE is 0, the operating modes will be update
                                                         directly without performing any SWITCH operations.   This
                                                         allows SW to perform the SWITCH operations manually, then
                                                         update the HW.

                                                         SW writes this bit to a 1 to indicate that HW should perform
                                                         the necessary SWITCH operations.   First, the POWER_CLASS
                                                         switch will be performed.   If it fails, SWITCH_ERR0 will be
                                                         and the remaining SWITCH operations will not be performed.   If
                                                         is succeeds, the POWER_CLASS field will be updated and the
                                                         HS_TIMING switch will be performed.   If it fails, SWITCH_ERR1
                                                         will be set and the remaining SWITCH operations will not be
                                                         performed.   If is succeeds, the HS_TIMING field will be
                                                         updated and the BUS_WITDH switch operation will be performed.
                                                         If it fails, SWITCH_ERR2 will be set.  If it succeeds, the
                                                         BUS_WITDH will be updated.

                                                         Changes to CLK_HI and CLK_LO are discarded if any switch error
                                                         occurs. */
	uint64_t switch_err0                  : 1;  /**< Error encounter while performing POWER_CLASS switch .   See
                                                         MIO_EMM_RSP_STS */
	uint64_t switch_err1                  : 1;  /**< Error encounter while performing HS_TIMING switch .   See
                                                         MIO_EMM_RSP_STS */
	uint64_t switch_err2                  : 1;  /**< Error encounter while performing BUS_WIDTH switch .   See
                                                         MIO_EMM_RSP_STS */
	uint64_t reserved_49_55               : 7;
	uint64_t hs_timing                    : 1;  /**< Requested update to HS_TIMING */
	uint64_t reserved_43_47               : 5;
	uint64_t bus_width                    : 3;  /**< Requested update to BUS_WIDTH */
	uint64_t reserved_36_39               : 4;
	uint64_t power_class                  : 4;  /**< Requested update to POWER_CLASS */
	uint64_t clk_hi                       : 16; /**< Requested update to CLK_HI */
	uint64_t clk_lo                       : 16; /**< Requested update to CLK_LO */
#else
	uint64_t clk_lo                       : 16;
	uint64_t clk_hi                       : 16;
	uint64_t power_class                  : 4;
	uint64_t reserved_36_39               : 4;
	uint64_t bus_width                    : 3;
	uint64_t reserved_43_47               : 5;
	uint64_t hs_timing                    : 1;
	uint64_t reserved_49_55               : 7;
	uint64_t switch_err2                  : 1;
	uint64_t switch_err1                  : 1;
	uint64_t switch_err0                  : 1;
	uint64_t switch_exe                   : 1;
	uint64_t bus_id                       : 2;
	uint64_t reserved_62_63               : 2;
#endif
	} s;
	struct cvmx_mio_emm_switch_s          cn61xx;
	struct cvmx_mio_emm_switch_s          cnf71xx;
};
typedef union cvmx_mio_emm_switch cvmx_mio_emm_switch_t;

/**
 * cvmx_mio_emm_wdog
 *
 * MIO_EMM_WDOG = MIO EMMC Watchdog Register
 *
 */
union cvmx_mio_emm_wdog {
	uint64_t u64;
	struct cvmx_mio_emm_wdog_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_26_63               : 38;
	uint64_t clk_cnt                      : 26; /**< Number of CLK_CNT cycles to wait for the card to return a
                                                         response, read data, or the 3-bit CRC status token. */
#else
	uint64_t clk_cnt                      : 26;
	uint64_t reserved_26_63               : 38;
#endif
	} s;
	struct cvmx_mio_emm_wdog_s            cn61xx;
	struct cvmx_mio_emm_wdog_s            cnf71xx;
};
typedef union cvmx_mio_emm_wdog cvmx_mio_emm_wdog_t;

/**
 * cvmx_mio_fus_bnk_dat#
 *
 * Notes:
 * The intial state of MIO_FUS_BNK_DAT* is as if bank6 was just read i.e. DAT* = fus[895:768]
 *
 */
union cvmx_mio_fus_bnk_datx {
	uint64_t u64;
	struct cvmx_mio_fus_bnk_datx_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t dat                          : 64; /**< Efuse bank store
                                                         For reads, the DAT gets the fus bank last read
                                                         For write, the DAT determines which fuses to blow */
#else
	uint64_t dat                          : 64;
#endif
	} s;
	struct cvmx_mio_fus_bnk_datx_s        cn50xx;
	struct cvmx_mio_fus_bnk_datx_s        cn52xx;
	struct cvmx_mio_fus_bnk_datx_s        cn52xxp1;
	struct cvmx_mio_fus_bnk_datx_s        cn56xx;
	struct cvmx_mio_fus_bnk_datx_s        cn56xxp1;
	struct cvmx_mio_fus_bnk_datx_s        cn58xx;
	struct cvmx_mio_fus_bnk_datx_s        cn58xxp1;
	struct cvmx_mio_fus_bnk_datx_s        cn61xx;
	struct cvmx_mio_fus_bnk_datx_s        cn63xx;
	struct cvmx_mio_fus_bnk_datx_s        cn63xxp1;
	struct cvmx_mio_fus_bnk_datx_s        cn66xx;
	struct cvmx_mio_fus_bnk_datx_s        cn68xx;
	struct cvmx_mio_fus_bnk_datx_s        cn68xxp1;
	struct cvmx_mio_fus_bnk_datx_s        cnf71xx;
};
typedef union cvmx_mio_fus_bnk_datx cvmx_mio_fus_bnk_datx_t;

/**
 * cvmx_mio_fus_dat0
 */
union cvmx_mio_fus_dat0 {
	uint64_t u64;
	struct cvmx_mio_fus_dat0_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_32_63               : 32;
	uint64_t man_info                     : 32; /**< Fuse information - manufacturing info [31:0] */
#else
	uint64_t man_info                     : 32;
	uint64_t reserved_32_63               : 32;
#endif
	} s;
	struct cvmx_mio_fus_dat0_s            cn30xx;
	struct cvmx_mio_fus_dat0_s            cn31xx;
	struct cvmx_mio_fus_dat0_s            cn38xx;
	struct cvmx_mio_fus_dat0_s            cn38xxp2;
	struct cvmx_mio_fus_dat0_s            cn50xx;
	struct cvmx_mio_fus_dat0_s            cn52xx;
	struct cvmx_mio_fus_dat0_s            cn52xxp1;
	struct cvmx_mio_fus_dat0_s            cn56xx;
	struct cvmx_mio_fus_dat0_s            cn56xxp1;
	struct cvmx_mio_fus_dat0_s            cn58xx;
	struct cvmx_mio_fus_dat0_s            cn58xxp1;
	struct cvmx_mio_fus_dat0_s            cn61xx;
	struct cvmx_mio_fus_dat0_s            cn63xx;
	struct cvmx_mio_fus_dat0_s            cn63xxp1;
	struct cvmx_mio_fus_dat0_s            cn66xx;
	struct cvmx_mio_fus_dat0_s            cn68xx;
	struct cvmx_mio_fus_dat0_s            cn68xxp1;
	struct cvmx_mio_fus_dat0_s            cnf71xx;
};
typedef union cvmx_mio_fus_dat0 cvmx_mio_fus_dat0_t;

/**
 * cvmx_mio_fus_dat1
 */
union cvmx_mio_fus_dat1 {
	uint64_t u64;
	struct cvmx_mio_fus_dat1_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_32_63               : 32;
	uint64_t man_info                     : 32; /**< Fuse information - manufacturing info [63:32] */
#else
	uint64_t man_info                     : 32;
	uint64_t reserved_32_63               : 32;
#endif
	} s;
	struct cvmx_mio_fus_dat1_s            cn30xx;
	struct cvmx_mio_fus_dat1_s            cn31xx;
	struct cvmx_mio_fus_dat1_s            cn38xx;
	struct cvmx_mio_fus_dat1_s            cn38xxp2;
	struct cvmx_mio_fus_dat1_s            cn50xx;
	struct cvmx_mio_fus_dat1_s            cn52xx;
	struct cvmx_mio_fus_dat1_s            cn52xxp1;
	struct cvmx_mio_fus_dat1_s            cn56xx;
	struct cvmx_mio_fus_dat1_s            cn56xxp1;
	struct cvmx_mio_fus_dat1_s            cn58xx;
	struct cvmx_mio_fus_dat1_s            cn58xxp1;
	struct cvmx_mio_fus_dat1_s            cn61xx;
	struct cvmx_mio_fus_dat1_s            cn63xx;
	struct cvmx_mio_fus_dat1_s            cn63xxp1;
	struct cvmx_mio_fus_dat1_s            cn66xx;
	struct cvmx_mio_fus_dat1_s            cn68xx;
	struct cvmx_mio_fus_dat1_s            cn68xxp1;
	struct cvmx_mio_fus_dat1_s            cnf71xx;
};
typedef union cvmx_mio_fus_dat1 cvmx_mio_fus_dat1_t;

/**
 * cvmx_mio_fus_dat2
 *
 * Notes:
 * CHIP_ID is consumed in several places within Octeon.
 *
 *    * Core COP0 ProcessorIdentification[Revision]
 *    * Core EJTAG DeviceIdentification[Version]
 *    * PCI_CFG02[RID]
 *    * JTAG controller
 *
 * Note: The JTAG controller gets CHIP_ID[3:0] solely from the laser fuses.
 * Modification to the efuses will not change what the JTAG controller reports
 * for CHIP_ID.
 */
union cvmx_mio_fus_dat2 {
	uint64_t u64;
	struct cvmx_mio_fus_dat2_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_48_63               : 16;
	uint64_t fus118                       : 1;  /**< Ignore Authentik disable */
	uint64_t rom_info                     : 10; /**< Fuse information - ROM info */
	uint64_t power_limit                  : 2;  /**< Fuse information - Power limit */
	uint64_t dorm_crypto                  : 1;  /**< Fuse information - See NOCRYPTO */
	uint64_t fus318                       : 1;  /**< Reserved */
	uint64_t raid_en                      : 1;  /**< Fuse information - RAID enabled */
	uint64_t reserved_30_31               : 2;
	uint64_t nokasu                       : 1;  /**< Fuse information - Disable Kasumi */
	uint64_t nodfa_cp2                    : 1;  /**< Fuse information - DFA Disable (CP2) */
	uint64_t nomul                        : 1;  /**< Fuse information - VMUL disable */
	uint64_t nocrypto                     : 1;  /**< Fuse information - DORM_CRYPTO and NOCRYPTO
                                                         together to select 1 of 4 mutually-exclusive
                                                         modes:

                                                         DORM_CRYPT=0,NOCRYPTO=0 AES/DES/HASH enabled
                                                         DORM_CRYPT=0,NOCRYPTO=1 AES/DES/HASH disable
                                                         DORM_CRYPT=1,NOCRYPTO=0 Dormant Encryption enable
                                                         DORM_CRYPT=1,NOCRYPTO=1 Authenik mode */
	uint64_t rst_sht                      : 1;  /**< Fuse information - When set, use short reset count */
	uint64_t bist_dis                     : 1;  /**< Fuse information - BIST Disable */
	uint64_t chip_id                      : 8;  /**< Fuse information - CHIP_ID */
	uint64_t reserved_0_15                : 16;
#else
	uint64_t reserved_0_15                : 16;
	uint64_t chip_id                      : 8;
	uint64_t bist_dis                     : 1;
	uint64_t rst_sht                      : 1;
	uint64_t nocrypto                     : 1;
	uint64_t nomul                        : 1;
	uint64_t nodfa_cp2                    : 1;
	uint64_t nokasu                       : 1;
	uint64_t reserved_30_31               : 2;
	uint64_t raid_en                      : 1;
	uint64_t fus318                       : 1;
	uint64_t dorm_crypto                  : 1;
	uint64_t power_limit                  : 2;
	uint64_t rom_info                     : 10;
	uint64_t fus118                       : 1;
	uint64_t reserved_48_63               : 16;
#endif
	} s;
	struct cvmx_mio_fus_dat2_cn30xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_29_63               : 35;
	uint64_t nodfa_cp2                    : 1;  /**< Fuse information - DFA Disable (CP2) */
	uint64_t nomul                        : 1;  /**< Fuse information - VMUL disable */
	uint64_t nocrypto                     : 1;  /**< Fuse information - AES/DES/HASH disable */
	uint64_t rst_sht                      : 1;  /**< Fuse information - When set, use short reset count */
	uint64_t bist_dis                     : 1;  /**< Fuse information - BIST Disable */
	uint64_t chip_id                      : 8;  /**< Fuse information - CHIP_ID */
	uint64_t pll_off                      : 4;  /**< Fuse information - core pll offset
                                                         Used to compute the base offset for the core pll.
                                                         the offset will be (PLL_OFF ^ 8)
                                                         Note, these fuses can only be set from laser fuse */
	uint64_t reserved_1_11                : 11;
	uint64_t pp_dis                       : 1;  /**< Fuse information - PP_DISABLES */
#else
	uint64_t pp_dis                       : 1;
	uint64_t reserved_1_11                : 11;
	uint64_t pll_off                      : 4;
	uint64_t chip_id                      : 8;
	uint64_t bist_dis                     : 1;
	uint64_t rst_sht                      : 1;
	uint64_t nocrypto                     : 1;
	uint64_t nomul                        : 1;
	uint64_t nodfa_cp2                    : 1;
	uint64_t reserved_29_63               : 35;
#endif
	} cn30xx;
	struct cvmx_mio_fus_dat2_cn31xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_29_63               : 35;
	uint64_t nodfa_cp2                    : 1;  /**< Fuse information - DFA Disable (CP2) */
	uint64_t nomul                        : 1;  /**< Fuse information - VMUL disable */
	uint64_t nocrypto                     : 1;  /**< Fuse information - AES/DES/HASH disable */
	uint64_t rst_sht                      : 1;  /**< Fuse information - When set, use short reset count */
	uint64_t bist_dis                     : 1;  /**< Fuse information - BIST Disable */
	uint64_t chip_id                      : 8;  /**< Fuse information - CHIP_ID */
	uint64_t pll_off                      : 4;  /**< Fuse information - core pll offset
                                                         Used to compute the base offset for the core pll.
                                                         the offset will be (PLL_OFF ^ 8)
                                                         Note, these fuses can only be set from laser fuse */
	uint64_t reserved_2_11                : 10;
	uint64_t pp_dis                       : 2;  /**< Fuse information - PP_DISABLES */
#else
	uint64_t pp_dis                       : 2;
	uint64_t reserved_2_11                : 10;
	uint64_t pll_off                      : 4;
	uint64_t chip_id                      : 8;
	uint64_t bist_dis                     : 1;
	uint64_t rst_sht                      : 1;
	uint64_t nocrypto                     : 1;
	uint64_t nomul                        : 1;
	uint64_t nodfa_cp2                    : 1;
	uint64_t reserved_29_63               : 35;
#endif
	} cn31xx;
	struct cvmx_mio_fus_dat2_cn38xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_29_63               : 35;
	uint64_t nodfa_cp2                    : 1;  /**< Fuse information - DFA Disable (CP2)
                                                         (PASS2 Only) */
	uint64_t nomul                        : 1;  /**< Fuse information - VMUL disable
                                                         (PASS2 Only) */
	uint64_t nocrypto                     : 1;  /**< Fuse information - AES/DES/HASH disable
                                                         (PASS2 Only) */
	uint64_t rst_sht                      : 1;  /**< Fuse information - When set, use short reset count */
	uint64_t bist_dis                     : 1;  /**< Fuse information - BIST Disable */
	uint64_t chip_id                      : 8;  /**< Fuse information - CHIP_ID */
	uint64_t pp_dis                       : 16; /**< Fuse information - PP_DISABLES */
#else
	uint64_t pp_dis                       : 16;
	uint64_t chip_id                      : 8;
	uint64_t bist_dis                     : 1;
	uint64_t rst_sht                      : 1;
	uint64_t nocrypto                     : 1;
	uint64_t nomul                        : 1;
	uint64_t nodfa_cp2                    : 1;
	uint64_t reserved_29_63               : 35;
#endif
	} cn38xx;
	struct cvmx_mio_fus_dat2_cn38xx       cn38xxp2;
	struct cvmx_mio_fus_dat2_cn50xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_34_63               : 30;
	uint64_t fus318                       : 1;  /**< Fuse information - a copy of fuse318 */
	uint64_t raid_en                      : 1;  /**< Fuse information - RAID enabled
                                                         (5020 does not have RAID co-processor) */
	uint64_t reserved_30_31               : 2;
	uint64_t nokasu                       : 1;  /**< Fuse information - Disable Kasumi */
	uint64_t nodfa_cp2                    : 1;  /**< Fuse information - DFA Disable (CP2)
                                                         (5020 does not have DFA co-processor) */
	uint64_t nomul                        : 1;  /**< Fuse information - VMUL disable */
	uint64_t nocrypto                     : 1;  /**< Fuse information - AES/DES/HASH disable */
	uint64_t rst_sht                      : 1;  /**< Fuse information - When set, use short reset count */
	uint64_t bist_dis                     : 1;  /**< Fuse information - BIST Disable */
	uint64_t chip_id                      : 8;  /**< Fuse information - CHIP_ID */
	uint64_t reserved_2_15                : 14;
	uint64_t pp_dis                       : 2;  /**< Fuse information - PP_DISABLES */
#else
	uint64_t pp_dis                       : 2;
	uint64_t reserved_2_15                : 14;
	uint64_t chip_id                      : 8;
	uint64_t bist_dis                     : 1;
	uint64_t rst_sht                      : 1;
	uint64_t nocrypto                     : 1;
	uint64_t nomul                        : 1;
	uint64_t nodfa_cp2                    : 1;
	uint64_t nokasu                       : 1;
	uint64_t reserved_30_31               : 2;
	uint64_t raid_en                      : 1;
	uint64_t fus318                       : 1;
	uint64_t reserved_34_63               : 30;
#endif
	} cn50xx;
	struct cvmx_mio_fus_dat2_cn52xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_34_63               : 30;
	uint64_t fus318                       : 1;  /**< Fuse information - a copy of fuse318 */
	uint64_t raid_en                      : 1;  /**< Fuse information - RAID enabled */
	uint64_t reserved_30_31               : 2;
	uint64_t nokasu                       : 1;  /**< Fuse information - Disable Kasumi */
	uint64_t nodfa_cp2                    : 1;  /**< Fuse information - DFA Disable (CP2) */
	uint64_t nomul                        : 1;  /**< Fuse information - VMUL disable */
	uint64_t nocrypto                     : 1;  /**< Fuse information - AES/DES/HASH disable */
	uint64_t rst_sht                      : 1;  /**< Fuse information - When set, use short reset count */
	uint64_t bist_dis                     : 1;  /**< Fuse information - BIST Disable */
	uint64_t chip_id                      : 8;  /**< Fuse information - CHIP_ID */
	uint64_t reserved_4_15                : 12;
	uint64_t pp_dis                       : 4;  /**< Fuse information - PP_DISABLES */
#else
	uint64_t pp_dis                       : 4;
	uint64_t reserved_4_15                : 12;
	uint64_t chip_id                      : 8;
	uint64_t bist_dis                     : 1;
	uint64_t rst_sht                      : 1;
	uint64_t nocrypto                     : 1;
	uint64_t nomul                        : 1;
	uint64_t nodfa_cp2                    : 1;
	uint64_t nokasu                       : 1;
	uint64_t reserved_30_31               : 2;
	uint64_t raid_en                      : 1;
	uint64_t fus318                       : 1;
	uint64_t reserved_34_63               : 30;
#endif
	} cn52xx;
	struct cvmx_mio_fus_dat2_cn52xx       cn52xxp1;
	struct cvmx_mio_fus_dat2_cn56xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_34_63               : 30;
	uint64_t fus318                       : 1;  /**< Fuse information - a copy of fuse318 */
	uint64_t raid_en                      : 1;  /**< Fuse information - RAID enabled */
	uint64_t reserved_30_31               : 2;
	uint64_t nokasu                       : 1;  /**< Fuse information - Disable Kasumi */
	uint64_t nodfa_cp2                    : 1;  /**< Fuse information - DFA Disable (CP2) */
	uint64_t nomul                        : 1;  /**< Fuse information - VMUL disable */
	uint64_t nocrypto                     : 1;  /**< Fuse information - AES/DES/HASH disable */
	uint64_t rst_sht                      : 1;  /**< Fuse information - When set, use short reset count */
	uint64_t bist_dis                     : 1;  /**< Fuse information - BIST Disable */
	uint64_t chip_id                      : 8;  /**< Fuse information - CHIP_ID */
	uint64_t reserved_12_15               : 4;
	uint64_t pp_dis                       : 12; /**< Fuse information - PP_DISABLES */
#else
	uint64_t pp_dis                       : 12;
	uint64_t reserved_12_15               : 4;
	uint64_t chip_id                      : 8;
	uint64_t bist_dis                     : 1;
	uint64_t rst_sht                      : 1;
	uint64_t nocrypto                     : 1;
	uint64_t nomul                        : 1;
	uint64_t nodfa_cp2                    : 1;
	uint64_t nokasu                       : 1;
	uint64_t reserved_30_31               : 2;
	uint64_t raid_en                      : 1;
	uint64_t fus318                       : 1;
	uint64_t reserved_34_63               : 30;
#endif
	} cn56xx;
	struct cvmx_mio_fus_dat2_cn56xx       cn56xxp1;
	struct cvmx_mio_fus_dat2_cn58xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_30_63               : 34;
	uint64_t nokasu                       : 1;  /**< Fuse information - Disable Kasumi */
	uint64_t nodfa_cp2                    : 1;  /**< Fuse information - DFA Disable (CP2) */
	uint64_t nomul                        : 1;  /**< Fuse information - VMUL disable */
	uint64_t nocrypto                     : 1;  /**< Fuse information - AES/DES/HASH disable */
	uint64_t rst_sht                      : 1;  /**< Fuse information - When set, use short reset count */
	uint64_t bist_dis                     : 1;  /**< Fuse information - BIST Disable */
	uint64_t chip_id                      : 8;  /**< Fuse information - CHIP_ID */
	uint64_t pp_dis                       : 16; /**< Fuse information - PP_DISABLES */
#else
	uint64_t pp_dis                       : 16;
	uint64_t chip_id                      : 8;
	uint64_t bist_dis                     : 1;
	uint64_t rst_sht                      : 1;
	uint64_t nocrypto                     : 1;
	uint64_t nomul                        : 1;
	uint64_t nodfa_cp2                    : 1;
	uint64_t nokasu                       : 1;
	uint64_t reserved_30_63               : 34;
#endif
	} cn58xx;
	struct cvmx_mio_fus_dat2_cn58xx       cn58xxp1;
	struct cvmx_mio_fus_dat2_cn61xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_48_63               : 16;
	uint64_t fus118                       : 1;  /**< Ignore Authentik disable */
	uint64_t rom_info                     : 10; /**< Fuse information - ROM info */
	uint64_t power_limit                  : 2;  /**< Fuse information - Power limit */
	uint64_t dorm_crypto                  : 1;  /**< Fuse information - See NOCRYPTO */
	uint64_t fus318                       : 1;  /**< Reserved */
	uint64_t raid_en                      : 1;  /**< Fuse information - RAID enabled */
	uint64_t reserved_29_31               : 3;
	uint64_t nodfa_cp2                    : 1;  /**< Fuse information - DFA Disable (CP2) */
	uint64_t nomul                        : 1;  /**< Fuse information - VMUL disable */
	uint64_t nocrypto                     : 1;  /**< Fuse information - DORM_CRYPTO and NOCRYPTO
                                                         together to select 1 of 4 mutually-exclusive
                                                         modes:

                                                         DORM_CRYPT=0,NOCRYPTO=0 AES/DES/HASH enabled
                                                         DORM_CRYPT=0,NOCRYPTO=1 AES/DES/HASH disable
                                                         DORM_CRYPT=1,NOCRYPTO=0 Dormant Encryption enable
                                                         DORM_CRYPT=1,NOCRYPTO=1 Authenik mode */
	uint64_t reserved_24_25               : 2;
	uint64_t chip_id                      : 8;  /**< Fuse information - CHIP_ID */
	uint64_t reserved_4_15                : 12;
	uint64_t pp_dis                       : 4;  /**< Fuse information - PP_DISABLES */
#else
	uint64_t pp_dis                       : 4;
	uint64_t reserved_4_15                : 12;
	uint64_t chip_id                      : 8;
	uint64_t reserved_24_25               : 2;
	uint64_t nocrypto                     : 1;
	uint64_t nomul                        : 1;
	uint64_t nodfa_cp2                    : 1;
	uint64_t reserved_29_31               : 3;
	uint64_t raid_en                      : 1;
	uint64_t fus318                       : 1;
	uint64_t dorm_crypto                  : 1;
	uint64_t power_limit                  : 2;
	uint64_t rom_info                     : 10;
	uint64_t fus118                       : 1;
	uint64_t reserved_48_63               : 16;
#endif
	} cn61xx;
	struct cvmx_mio_fus_dat2_cn63xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_35_63               : 29;
	uint64_t dorm_crypto                  : 1;  /**< Fuse information - Dormant Encryption enable */
	uint64_t fus318                       : 1;  /**< Reserved */
	uint64_t raid_en                      : 1;  /**< Fuse information - RAID enabled */
	uint64_t reserved_29_31               : 3;
	uint64_t nodfa_cp2                    : 1;  /**< Fuse information - DFA Disable (CP2) */
	uint64_t nomul                        : 1;  /**< Fuse information - VMUL disable */
	uint64_t nocrypto                     : 1;  /**< Fuse information - AES/DES/HASH disable */
	uint64_t reserved_24_25               : 2;
	uint64_t chip_id                      : 8;  /**< Fuse information - CHIP_ID */
	uint64_t reserved_6_15                : 10;
	uint64_t pp_dis                       : 6;  /**< Fuse information - PP_DISABLES */
#else
	uint64_t pp_dis                       : 6;
	uint64_t reserved_6_15                : 10;
	uint64_t chip_id                      : 8;
	uint64_t reserved_24_25               : 2;
	uint64_t nocrypto                     : 1;
	uint64_t nomul                        : 1;
	uint64_t nodfa_cp2                    : 1;
	uint64_t reserved_29_31               : 3;
	uint64_t raid_en                      : 1;
	uint64_t fus318                       : 1;
	uint64_t dorm_crypto                  : 1;
	uint64_t reserved_35_63               : 29;
#endif
	} cn63xx;
	struct cvmx_mio_fus_dat2_cn63xx       cn63xxp1;
	struct cvmx_mio_fus_dat2_cn66xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_48_63               : 16;
	uint64_t fus118                       : 1;  /**< Ignore Authentik disable */
	uint64_t rom_info                     : 10; /**< Fuse information - ROM info */
	uint64_t power_limit                  : 2;  /**< Fuse information - Power limit */
	uint64_t dorm_crypto                  : 1;  /**< Fuse information - See NOCRYPTO */
	uint64_t fus318                       : 1;  /**< Reserved */
	uint64_t raid_en                      : 1;  /**< Fuse information - RAID enabled */
	uint64_t reserved_29_31               : 3;
	uint64_t nodfa_cp2                    : 1;  /**< Fuse information - DFA Disable (CP2) */
	uint64_t nomul                        : 1;  /**< Fuse information - VMUL disable */
	uint64_t nocrypto                     : 1;  /**< Fuse information - DORM_CRYPTO and NOCRYPTO
                                                         together to select 1 of 4 mutually-exclusive
                                                         modes:

                                                         DORM_CRYPT=0,NOCRYPTO=0 AES/DES/HASH enabled
                                                         DORM_CRYPT=0,NOCRYPTO=1 AES/DES/HASH disable
                                                         DORM_CRYPT=1,NOCRYPTO=0 Dormant Encryption enable
                                                         DORM_CRYPT=1,NOCRYPTO=1 Authenik mode */
	uint64_t reserved_24_25               : 2;
	uint64_t chip_id                      : 8;  /**< Fuse information - CHIP_ID */
	uint64_t reserved_10_15               : 6;
	uint64_t pp_dis                       : 10; /**< Fuse information - PP_DISABLES */
#else
	uint64_t pp_dis                       : 10;
	uint64_t reserved_10_15               : 6;
	uint64_t chip_id                      : 8;
	uint64_t reserved_24_25               : 2;
	uint64_t nocrypto                     : 1;
	uint64_t nomul                        : 1;
	uint64_t nodfa_cp2                    : 1;
	uint64_t reserved_29_31               : 3;
	uint64_t raid_en                      : 1;
	uint64_t fus318                       : 1;
	uint64_t dorm_crypto                  : 1;
	uint64_t power_limit                  : 2;
	uint64_t rom_info                     : 10;
	uint64_t fus118                       : 1;
	uint64_t reserved_48_63               : 16;
#endif
	} cn66xx;
	struct cvmx_mio_fus_dat2_cn68xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_37_63               : 27;
	uint64_t power_limit                  : 2;  /**< Fuse information - Power limit */
	uint64_t dorm_crypto                  : 1;  /**< Fuse information - Dormant Encryption enable */
	uint64_t fus318                       : 1;  /**< Reserved */
	uint64_t raid_en                      : 1;  /**< Fuse information - RAID enabled */
	uint64_t reserved_29_31               : 3;
	uint64_t nodfa_cp2                    : 1;  /**< Fuse information - DFA Disable (CP2) */
	uint64_t nomul                        : 1;  /**< Fuse information - VMUL disable */
	uint64_t nocrypto                     : 1;  /**< Fuse information - AES/DES/HASH disable */
	uint64_t reserved_24_25               : 2;
	uint64_t chip_id                      : 8;  /**< Fuse information - CHIP_ID */
	uint64_t reserved_0_15                : 16;
#else
	uint64_t reserved_0_15                : 16;
	uint64_t chip_id                      : 8;
	uint64_t reserved_24_25               : 2;
	uint64_t nocrypto                     : 1;
	uint64_t nomul                        : 1;
	uint64_t nodfa_cp2                    : 1;
	uint64_t reserved_29_31               : 3;
	uint64_t raid_en                      : 1;
	uint64_t fus318                       : 1;
	uint64_t dorm_crypto                  : 1;
	uint64_t power_limit                  : 2;
	uint64_t reserved_37_63               : 27;
#endif
	} cn68xx;
	struct cvmx_mio_fus_dat2_cn68xx       cn68xxp1;
	struct cvmx_mio_fus_dat2_cn61xx       cnf71xx;
};
typedef union cvmx_mio_fus_dat2 cvmx_mio_fus_dat2_t;

/**
 * cvmx_mio_fus_dat3
 */
union cvmx_mio_fus_dat3 {
	uint64_t u64;
	struct cvmx_mio_fus_dat3_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_58_63               : 6;
	uint64_t pll_ctl                      : 10; /**< Fuse information - PLL control */
	uint64_t dfa_info_dte                 : 3;  /**< Fuse information - DFA information (DTE) */
	uint64_t dfa_info_clm                 : 4;  /**< Fuse information - DFA information (Cluster mask) */
	uint64_t reserved_40_40               : 1;
	uint64_t ema                          : 2;  /**< Fuse information - EMA */
	uint64_t efus_lck_rsv                 : 1;  /**< Fuse information - efuse lockdown */
	uint64_t efus_lck_man                 : 1;  /**< Fuse information - efuse lockdown */
	uint64_t pll_half_dis                 : 1;  /**< Fuse information - RCLK PLL control */
	uint64_t l2c_crip                     : 3;  /**< Fuse information - L2C Cripple (1/8, 1/4, 1/2) */
	uint64_t pll_div4                     : 1;  /**< Fuse information - PLL DIV4 mode
                                                         (laser fuse only) */
	uint64_t reserved_29_30               : 2;
	uint64_t bar2_en                      : 1;  /**< Fuse information - BAR2 Present (when blown '1') */
	uint64_t efus_lck                     : 1;  /**< Fuse information - efuse lockdown */
	uint64_t efus_ign                     : 1;  /**< Fuse information - efuse ignore */
	uint64_t nozip                        : 1;  /**< Fuse information - ZIP disable */
	uint64_t nodfa_dte                    : 1;  /**< Fuse information - DFA Disable (DTE) */
	uint64_t icache                       : 24; /**< Fuse information - ICACHE Hard Repair Data */
#else
	uint64_t icache                       : 24;
	uint64_t nodfa_dte                    : 1;
	uint64_t nozip                        : 1;
	uint64_t efus_ign                     : 1;
	uint64_t efus_lck                     : 1;
	uint64_t bar2_en                      : 1;
	uint64_t reserved_29_30               : 2;
	uint64_t pll_div4                     : 1;
	uint64_t l2c_crip                     : 3;
	uint64_t pll_half_dis                 : 1;
	uint64_t efus_lck_man                 : 1;
	uint64_t efus_lck_rsv                 : 1;
	uint64_t ema                          : 2;
	uint64_t reserved_40_40               : 1;
	uint64_t dfa_info_clm                 : 4;
	uint64_t dfa_info_dte                 : 3;
	uint64_t pll_ctl                      : 10;
	uint64_t reserved_58_63               : 6;
#endif
	} s;
	struct cvmx_mio_fus_dat3_cn30xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_32_63               : 32;
	uint64_t pll_div4                     : 1;  /**< Fuse information - PLL DIV4 mode
                                                         (laser fuse only) */
	uint64_t reserved_29_30               : 2;
	uint64_t bar2_en                      : 1;  /**< Fuse information - BAR2 Enable (when blown '1') */
	uint64_t efus_lck                     : 1;  /**< Fuse information - efuse lockdown */
	uint64_t efus_ign                     : 1;  /**< Fuse information - efuse ignore
                                                         This bit only has side effects when blown in
                                                         the laser fuses.  It is ignore if only set in
                                                         efuse store. */
	uint64_t nozip                        : 1;  /**< Fuse information - ZIP disable */
	uint64_t nodfa_dte                    : 1;  /**< Fuse information - DFA Disable (DTE) */
	uint64_t icache                       : 24; /**< Fuse information - ICACHE Hard Repair Data */
#else
	uint64_t icache                       : 24;
	uint64_t nodfa_dte                    : 1;
	uint64_t nozip                        : 1;
	uint64_t efus_ign                     : 1;
	uint64_t efus_lck                     : 1;
	uint64_t bar2_en                      : 1;
	uint64_t reserved_29_30               : 2;
	uint64_t pll_div4                     : 1;
	uint64_t reserved_32_63               : 32;
#endif
	} cn30xx;
	struct cvmx_mio_fus_dat3_cn31xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_32_63               : 32;
	uint64_t pll_div4                     : 1;  /**< Fuse information - PLL DIV4 mode
                                                         (laser fuse only) */
	uint64_t zip_crip                     : 2;  /**< Fuse information - Zip Cripple
                                                         (O2P Only) */
	uint64_t bar2_en                      : 1;  /**< Fuse information - BAR2 Enable (when blown '1') */
	uint64_t efus_lck                     : 1;  /**< Fuse information - efuse lockdown */
	uint64_t efus_ign                     : 1;  /**< Fuse information - efuse ignore
                                                         This bit only has side effects when blown in
                                                         the laser fuses.  It is ignore if only set in
                                                         efuse store. */
	uint64_t nozip                        : 1;  /**< Fuse information - ZIP disable */
	uint64_t nodfa_dte                    : 1;  /**< Fuse information - DFA Disable (DTE) */
	uint64_t icache                       : 24; /**< Fuse information - ICACHE Hard Repair Data */
#else
	uint64_t icache                       : 24;
	uint64_t nodfa_dte                    : 1;
	uint64_t nozip                        : 1;
	uint64_t efus_ign                     : 1;
	uint64_t efus_lck                     : 1;
	uint64_t bar2_en                      : 1;
	uint64_t zip_crip                     : 2;
	uint64_t pll_div4                     : 1;
	uint64_t reserved_32_63               : 32;
#endif
	} cn31xx;
	struct cvmx_mio_fus_dat3_cn38xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_31_63               : 33;
	uint64_t zip_crip                     : 2;  /**< Fuse information - Zip Cripple
                                                         (PASS3 Only) */
	uint64_t bar2_en                      : 1;  /**< Fuse information - BAR2 Enable (when blown '1')
                                                         (PASS2 Only) */
	uint64_t efus_lck                     : 1;  /**< Fuse information - efuse lockdown
                                                         (PASS2 Only) */
	uint64_t efus_ign                     : 1;  /**< Fuse information - efuse ignore
                                                         This bit only has side effects when blown in
                                                         the laser fuses.  It is ignore if only set in
                                                         efuse store.
                                                         (PASS2 Only) */
	uint64_t nozip                        : 1;  /**< Fuse information - ZIP disable
                                                         (PASS2 Only) */
	uint64_t nodfa_dte                    : 1;  /**< Fuse information - DFA Disable (DTE)
                                                         (PASS2 Only) */
	uint64_t icache                       : 24; /**< Fuse information - ICACHE Hard Repair Data */
#else
	uint64_t icache                       : 24;
	uint64_t nodfa_dte                    : 1;
	uint64_t nozip                        : 1;
	uint64_t efus_ign                     : 1;
	uint64_t efus_lck                     : 1;
	uint64_t bar2_en                      : 1;
	uint64_t zip_crip                     : 2;
	uint64_t reserved_31_63               : 33;
#endif
	} cn38xx;
	struct cvmx_mio_fus_dat3_cn38xxp2 {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_29_63               : 35;
	uint64_t bar2_en                      : 1;  /**< Fuse information - BAR2 Enable (when blown '1')
                                                         (PASS2 Only) */
	uint64_t efus_lck                     : 1;  /**< Fuse information - efuse lockdown
                                                         (PASS2 Only) */
	uint64_t efus_ign                     : 1;  /**< Fuse information - efuse ignore
                                                         This bit only has side effects when blown in
                                                         the laser fuses.  It is ignore if only set in
                                                         efuse store.
                                                         (PASS2 Only) */
	uint64_t nozip                        : 1;  /**< Fuse information - ZIP disable
                                                         (PASS2 Only) */
	uint64_t nodfa_dte                    : 1;  /**< Fuse information - DFA Disable (DTE)
                                                         (PASS2 Only) */
	uint64_t icache                       : 24; /**< Fuse information - ICACHE Hard Repair Data */
#else
	uint64_t icache                       : 24;
	uint64_t nodfa_dte                    : 1;
	uint64_t nozip                        : 1;
	uint64_t efus_ign                     : 1;
	uint64_t efus_lck                     : 1;
	uint64_t bar2_en                      : 1;
	uint64_t reserved_29_63               : 35;
#endif
	} cn38xxp2;
	struct cvmx_mio_fus_dat3_cn38xx       cn50xx;
	struct cvmx_mio_fus_dat3_cn38xx       cn52xx;
	struct cvmx_mio_fus_dat3_cn38xx       cn52xxp1;
	struct cvmx_mio_fus_dat3_cn38xx       cn56xx;
	struct cvmx_mio_fus_dat3_cn38xx       cn56xxp1;
	struct cvmx_mio_fus_dat3_cn38xx       cn58xx;
	struct cvmx_mio_fus_dat3_cn38xx       cn58xxp1;
	struct cvmx_mio_fus_dat3_cn61xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_58_63               : 6;
	uint64_t pll_ctl                      : 10; /**< Fuse information - PLL control */
	uint64_t dfa_info_dte                 : 3;  /**< Fuse information - DFA information (DTE) */
	uint64_t dfa_info_clm                 : 4;  /**< Fuse information - DFA information (Cluster mask) */
	uint64_t reserved_40_40               : 1;
	uint64_t ema                          : 2;  /**< Fuse information - EMA */
	uint64_t efus_lck_rsv                 : 1;  /**< Fuse information - efuse lockdown */
	uint64_t efus_lck_man                 : 1;  /**< Fuse information - efuse lockdown */
	uint64_t pll_half_dis                 : 1;  /**< Fuse information - RCLK PLL control */
	uint64_t l2c_crip                     : 3;  /**< Fuse information - L2C Cripple (1/8, 1/4, 1/2) */
	uint64_t reserved_31_31               : 1;
	uint64_t zip_info                     : 2;  /**< Fuse information - Zip information */
	uint64_t bar2_en                      : 1;  /**< Fuse information - BAR2 Present (when blown '1') */
	uint64_t efus_lck                     : 1;  /**< Fuse information - efuse lockdown */
	uint64_t efus_ign                     : 1;  /**< Fuse information - efuse ignore */
	uint64_t nozip                        : 1;  /**< Fuse information - ZIP disable */
	uint64_t nodfa_dte                    : 1;  /**< Fuse information - DFA Disable (DTE) */
	uint64_t reserved_0_23                : 24;
#else
	uint64_t reserved_0_23                : 24;
	uint64_t nodfa_dte                    : 1;
	uint64_t nozip                        : 1;
	uint64_t efus_ign                     : 1;
	uint64_t efus_lck                     : 1;
	uint64_t bar2_en                      : 1;
	uint64_t zip_info                     : 2;
	uint64_t reserved_31_31               : 1;
	uint64_t l2c_crip                     : 3;
	uint64_t pll_half_dis                 : 1;
	uint64_t efus_lck_man                 : 1;
	uint64_t efus_lck_rsv                 : 1;
	uint64_t ema                          : 2;
	uint64_t reserved_40_40               : 1;
	uint64_t dfa_info_clm                 : 4;
	uint64_t dfa_info_dte                 : 3;
	uint64_t pll_ctl                      : 10;
	uint64_t reserved_58_63               : 6;
#endif
	} cn61xx;
	struct cvmx_mio_fus_dat3_cn61xx       cn63xx;
	struct cvmx_mio_fus_dat3_cn61xx       cn63xxp1;
	struct cvmx_mio_fus_dat3_cn61xx       cn66xx;
	struct cvmx_mio_fus_dat3_cn61xx       cn68xx;
	struct cvmx_mio_fus_dat3_cn61xx       cn68xxp1;
	struct cvmx_mio_fus_dat3_cn61xx       cnf71xx;
};
typedef union cvmx_mio_fus_dat3 cvmx_mio_fus_dat3_t;

/**
 * cvmx_mio_fus_ema
 *
 * DON'T PUT IN HRM*
 *
 */
union cvmx_mio_fus_ema {
	uint64_t u64;
	struct cvmx_mio_fus_ema_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_7_63                : 57;
	uint64_t eff_ema                      : 3;  /**< Reserved */
	uint64_t reserved_3_3                 : 1;
	uint64_t ema                          : 3;  /**< Reserved */
#else
	uint64_t ema                          : 3;
	uint64_t reserved_3_3                 : 1;
	uint64_t eff_ema                      : 3;
	uint64_t reserved_7_63                : 57;
#endif
	} s;
	struct cvmx_mio_fus_ema_s             cn50xx;
	struct cvmx_mio_fus_ema_s             cn52xx;
	struct cvmx_mio_fus_ema_s             cn52xxp1;
	struct cvmx_mio_fus_ema_s             cn56xx;
	struct cvmx_mio_fus_ema_s             cn56xxp1;
	struct cvmx_mio_fus_ema_cn58xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_2_63                : 62;
	uint64_t ema                          : 2;  /**< EMA Settings */
#else
	uint64_t ema                          : 2;
	uint64_t reserved_2_63                : 62;
#endif
	} cn58xx;
	struct cvmx_mio_fus_ema_cn58xx        cn58xxp1;
	struct cvmx_mio_fus_ema_s             cn61xx;
	struct cvmx_mio_fus_ema_s             cn63xx;
	struct cvmx_mio_fus_ema_s             cn63xxp1;
	struct cvmx_mio_fus_ema_s             cn66xx;
	struct cvmx_mio_fus_ema_s             cn68xx;
	struct cvmx_mio_fus_ema_s             cn68xxp1;
	struct cvmx_mio_fus_ema_s             cnf71xx;
};
typedef union cvmx_mio_fus_ema cvmx_mio_fus_ema_t;

/**
 * cvmx_mio_fus_pdf
 */
union cvmx_mio_fus_pdf {
	uint64_t u64;
	struct cvmx_mio_fus_pdf_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t pdf                          : 64; /**< Fuse information - Product Definition Field */
#else
	uint64_t pdf                          : 64;
#endif
	} s;
	struct cvmx_mio_fus_pdf_s             cn50xx;
	struct cvmx_mio_fus_pdf_s             cn52xx;
	struct cvmx_mio_fus_pdf_s             cn52xxp1;
	struct cvmx_mio_fus_pdf_s             cn56xx;
	struct cvmx_mio_fus_pdf_s             cn56xxp1;
	struct cvmx_mio_fus_pdf_s             cn58xx;
	struct cvmx_mio_fus_pdf_s             cn61xx;
	struct cvmx_mio_fus_pdf_s             cn63xx;
	struct cvmx_mio_fus_pdf_s             cn63xxp1;
	struct cvmx_mio_fus_pdf_s             cn66xx;
	struct cvmx_mio_fus_pdf_s             cn68xx;
	struct cvmx_mio_fus_pdf_s             cn68xxp1;
	struct cvmx_mio_fus_pdf_s             cnf71xx;
};
typedef union cvmx_mio_fus_pdf cvmx_mio_fus_pdf_t;

/**
 * cvmx_mio_fus_pll
 *
 * Notes:
 * The core clkout postscaler should be placed in reset at least 10 ref clocks prior to changing
 * the core clkout select.  The core clkout postscaler should remain under reset for at least 10
 * ref clocks after the core clkout select changes.
 *
 * The pnr clkout postscaler should be placed in reset at least 10 ref clocks prior to changing
 * the pnr clkout select.  The pnr clkout postscaler should remain under reset for at least 10
 * ref clocks after the pnr clkout select changes.
 */
union cvmx_mio_fus_pll {
	uint64_t u64;
	struct cvmx_mio_fus_pll_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_48_63               : 16;
	uint64_t rclk_align_r                 : 8;  /**< RCLK right alignment settings */
	uint64_t rclk_align_l                 : 8;  /**< RCLK left alignment settings */
	uint64_t reserved_8_31                : 24;
	uint64_t c_cout_rst                   : 1;  /**< Core clkout postscaler reset */
	uint64_t c_cout_sel                   : 2;  /**< Core clkout select
                                                         0=RCLK,1=PS output,2=PLL output,3=undivided RCLK |   $PR
                                                         (***Pass 1.x: 3=GND) */
	uint64_t pnr_cout_rst                 : 1;  /**< PNR  clkout postscaler reset */
	uint64_t pnr_cout_sel                 : 2;  /**< PNR  clkout select
                                                         0=SCLK,1=PS output,2=PLL output,3=undivided RCLK |   $PR
                                                         (***Pass 1.x: 3=GND) */
	uint64_t rfslip                       : 1;  /**< Reserved */
	uint64_t fbslip                       : 1;  /**< Reserved */
#else
	uint64_t fbslip                       : 1;
	uint64_t rfslip                       : 1;
	uint64_t pnr_cout_sel                 : 2;
	uint64_t pnr_cout_rst                 : 1;
	uint64_t c_cout_sel                   : 2;
	uint64_t c_cout_rst                   : 1;
	uint64_t reserved_8_31                : 24;
	uint64_t rclk_align_l                 : 8;
	uint64_t rclk_align_r                 : 8;
	uint64_t reserved_48_63               : 16;
#endif
	} s;
	struct cvmx_mio_fus_pll_cn50xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_2_63                : 62;
	uint64_t rfslip                       : 1;  /**< PLL reference clock slip */
	uint64_t fbslip                       : 1;  /**< PLL feedback clock slip */
#else
	uint64_t fbslip                       : 1;
	uint64_t rfslip                       : 1;
	uint64_t reserved_2_63                : 62;
#endif
	} cn50xx;
	struct cvmx_mio_fus_pll_cn50xx        cn52xx;
	struct cvmx_mio_fus_pll_cn50xx        cn52xxp1;
	struct cvmx_mio_fus_pll_cn50xx        cn56xx;
	struct cvmx_mio_fus_pll_cn50xx        cn56xxp1;
	struct cvmx_mio_fus_pll_cn50xx        cn58xx;
	struct cvmx_mio_fus_pll_cn50xx        cn58xxp1;
	struct cvmx_mio_fus_pll_cn61xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t c_cout_rst                   : 1;  /**< Core clkout postscaler reset */
	uint64_t c_cout_sel                   : 2;  /**< Core clkout select
                                                         0=RCLK,1=PS output,2=PLL output,3=undivided RCLK |   $PR
                                                         (***Pass 1.x: 3=GND) */
	uint64_t pnr_cout_rst                 : 1;  /**< PNR  clkout postscaler reset */
	uint64_t pnr_cout_sel                 : 2;  /**< PNR  clkout select
                                                         0=SCLK,1=PS output,2=PLL output,3=undivided RCLK |   $PR
                                                         (***Pass 1.x: 3=GND) */
	uint64_t rfslip                       : 1;  /**< Reserved */
	uint64_t fbslip                       : 1;  /**< Reserved */
#else
	uint64_t fbslip                       : 1;
	uint64_t rfslip                       : 1;
	uint64_t pnr_cout_sel                 : 2;
	uint64_t pnr_cout_rst                 : 1;
	uint64_t c_cout_sel                   : 2;
	uint64_t c_cout_rst                   : 1;
	uint64_t reserved_8_63                : 56;
#endif
	} cn61xx;
	struct cvmx_mio_fus_pll_cn61xx        cn63xx;
	struct cvmx_mio_fus_pll_cn61xx        cn63xxp1;
	struct cvmx_mio_fus_pll_cn61xx        cn66xx;
	struct cvmx_mio_fus_pll_s             cn68xx;
	struct cvmx_mio_fus_pll_s             cn68xxp1;
	struct cvmx_mio_fus_pll_cn61xx        cnf71xx;
};
typedef union cvmx_mio_fus_pll cvmx_mio_fus_pll_t;

/**
 * cvmx_mio_fus_prog
 *
 * DON'T PUT IN HRM*
 *
 *
 * Notes:
 * This CSR is not present in the HRM.
 *
 * To write a bank of fuses, SW must set MIO_FUS_WADR[ADDR] to the bank to be
 * programmed and then set each bit within MIO_FUS_BNK_DATX to indicate which
 * fuses to blow.  Once ADDR, and DAT are setup, SW can write to
 * MIO_FUS_PROG[PROG] to start the bank write and poll on PROG.  Once PROG is
 * clear, the bank write is complete.
 *
 * A soft blow is still subject to lockdown fuses.  After a soft/warm reset, the
 * chip will behave as though the fuses were actually blown.  A cold reset restores
 * the actual fuse valuse.
 */
union cvmx_mio_fus_prog {
	uint64_t u64;
	struct cvmx_mio_fus_prog_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_2_63                : 62;
	uint64_t soft                         : 1;  /**< When set with PROG, causes only the local storeage
                                                         to change.  Will not really blow any fuses.  HW
                                                         will clear when the program operation is complete */
	uint64_t prog                         : 1;  /**< Blow the fuse bank
                                                         SW will set PROG, and then the HW will clear
                                                         when the program operation is complete */
#else
	uint64_t prog                         : 1;
	uint64_t soft                         : 1;
	uint64_t reserved_2_63                : 62;
#endif
	} s;
	struct cvmx_mio_fus_prog_cn30xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t prog                         : 1;  /**< Blow the fuse
                                                         SW will set PROG, hold it for 10us, then clear it */
#else
	uint64_t prog                         : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} cn30xx;
	struct cvmx_mio_fus_prog_cn30xx       cn31xx;
	struct cvmx_mio_fus_prog_cn30xx       cn38xx;
	struct cvmx_mio_fus_prog_cn30xx       cn38xxp2;
	struct cvmx_mio_fus_prog_cn30xx       cn50xx;
	struct cvmx_mio_fus_prog_cn30xx       cn52xx;
	struct cvmx_mio_fus_prog_cn30xx       cn52xxp1;
	struct cvmx_mio_fus_prog_cn30xx       cn56xx;
	struct cvmx_mio_fus_prog_cn30xx       cn56xxp1;
	struct cvmx_mio_fus_prog_cn30xx       cn58xx;
	struct cvmx_mio_fus_prog_cn30xx       cn58xxp1;
	struct cvmx_mio_fus_prog_s            cn61xx;
	struct cvmx_mio_fus_prog_s            cn63xx;
	struct cvmx_mio_fus_prog_s            cn63xxp1;
	struct cvmx_mio_fus_prog_s            cn66xx;
	struct cvmx_mio_fus_prog_s            cn68xx;
	struct cvmx_mio_fus_prog_s            cn68xxp1;
	struct cvmx_mio_fus_prog_s            cnf71xx;
};
typedef union cvmx_mio_fus_prog cvmx_mio_fus_prog_t;

/**
 * cvmx_mio_fus_prog_times
 *
 * DON'T PUT IN HRM*
 *
 *
 * Notes:
 * This CSR is not present in the HRM.
 *
 * All values must be > 0 for correct electrical operation.
 *
 * IFB fuses are 0..1791
 * L6G fuses are 1792 to 2047
 *
 * The reset values are for IFB fuses for ref_clk of 100MHZ
 */
union cvmx_mio_fus_prog_times {
	uint64_t u64;
	struct cvmx_mio_fus_prog_times_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_35_63               : 29;
	uint64_t vgate_pin                    : 1;  /**< efuse vgate pin (L6G) */
	uint64_t fsrc_pin                     : 1;  /**< efuse fsource pin (L6G) */
	uint64_t prog_pin                     : 1;  /**< efuse program pin (IFB) */
	uint64_t reserved_6_31                : 26;
	uint64_t setup                        : 6;  /**< efuse timing param

                                                         SETUP = (tWRS/refclk period)-1

                                                         For IFB: tWRS =  20ns
                                                         For L6G: tWRS =  20ns */
#else
	uint64_t setup                        : 6;
	uint64_t reserved_6_31                : 26;
	uint64_t prog_pin                     : 1;
	uint64_t fsrc_pin                     : 1;
	uint64_t vgate_pin                    : 1;
	uint64_t reserved_35_63               : 29;
#endif
	} s;
	struct cvmx_mio_fus_prog_times_cn50xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_33_63               : 31;
	uint64_t prog_pin                     : 1;  /**< efuse program pin */
	uint64_t out                          : 8;  /**< efuse timing param (ref_clks to delay 10ns) */
	uint64_t sclk_lo                      : 4;  /**< efuse timing param (ref_clks to delay 5ns) */
	uint64_t sclk_hi                      : 12; /**< efuse timing param (ref_clks to delay 1000ns) */
	uint64_t setup                        : 8;  /**< efuse timing param (ref_clks to delay 10ns) */
#else
	uint64_t setup                        : 8;
	uint64_t sclk_hi                      : 12;
	uint64_t sclk_lo                      : 4;
	uint64_t out                          : 8;
	uint64_t prog_pin                     : 1;
	uint64_t reserved_33_63               : 31;
#endif
	} cn50xx;
	struct cvmx_mio_fus_prog_times_cn50xx cn52xx;
	struct cvmx_mio_fus_prog_times_cn50xx cn52xxp1;
	struct cvmx_mio_fus_prog_times_cn50xx cn56xx;
	struct cvmx_mio_fus_prog_times_cn50xx cn56xxp1;
	struct cvmx_mio_fus_prog_times_cn50xx cn58xx;
	struct cvmx_mio_fus_prog_times_cn50xx cn58xxp1;
	struct cvmx_mio_fus_prog_times_cn61xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_35_63               : 29;
	uint64_t vgate_pin                    : 1;  /**< efuse vgate pin (L6G) */
	uint64_t fsrc_pin                     : 1;  /**< efuse fsource pin (L6G) */
	uint64_t prog_pin                     : 1;  /**< efuse program pin (IFB) */
	uint64_t out                          : 7;  /**< efuse timing param

                                                         OUT = (tOUT/refclk period)-1

                                                         For IFB: tOUT =  20ns
                                                         For L6G: tOUT =  20ns */
	uint64_t sclk_lo                      : 4;  /**< efuse timing param

                                                         SCLK_LO=(tSLO/refclk period)-1

                                                         For IFB: tSLO =  20ns
                                                         For L6G: tSLO =  20ns */
	uint64_t sclk_hi                      : 15; /**< efuse timing param
                                                         ***NOTE: Pass 1.x reset value is 20000

                                                         SCLK_HI=(tSHI/refclk period)-1

                                                         For IFB: tSHI =  200us
                                                         For L6G: tSHI =  25us */
	uint64_t setup                        : 6;  /**< efuse timing param

                                                         SETUP = (tWRS/refclk period)-1

                                                         For IFB: tWRS =  20ns
                                                         For L6G: tWRS =  20ns */
#else
	uint64_t setup                        : 6;
	uint64_t sclk_hi                      : 15;
	uint64_t sclk_lo                      : 4;
	uint64_t out                          : 7;
	uint64_t prog_pin                     : 1;
	uint64_t fsrc_pin                     : 1;
	uint64_t vgate_pin                    : 1;
	uint64_t reserved_35_63               : 29;
#endif
	} cn61xx;
	struct cvmx_mio_fus_prog_times_cn61xx cn63xx;
	struct cvmx_mio_fus_prog_times_cn61xx cn63xxp1;
	struct cvmx_mio_fus_prog_times_cn61xx cn66xx;
	struct cvmx_mio_fus_prog_times_cn61xx cn68xx;
	struct cvmx_mio_fus_prog_times_cn61xx cn68xxp1;
	struct cvmx_mio_fus_prog_times_cn61xx cnf71xx;
};
typedef union cvmx_mio_fus_prog_times cvmx_mio_fus_prog_times_t;

/**
 * cvmx_mio_fus_rcmd
 *
 * Notes:
 * To read an efuse, SW writes MIO_FUS_RCMD[ADDR,PEND] with the byte address of
 * the fuse in question, then SW can poll MIO_FUS_RCMD[PEND].  When PEND is
 * clear, then MIO_FUS_RCMD[DAT] is valid.  In addition, if the efuse read went
 * to the efuse banks (eg. ((ADDR/16) not [0,1,7]) || EFUSE) SW can read
 * MIO_FUS_BNK_DATX which contains all 128 fuses in the bank associated in
 * ADDR.
 */
union cvmx_mio_fus_rcmd {
	uint64_t u64;
	struct cvmx_mio_fus_rcmd_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_24_63               : 40;
	uint64_t dat                          : 8;  /**< 8bits of fuse data */
	uint64_t reserved_13_15               : 3;
	uint64_t pend                         : 1;  /**< SW sets this bit on a write to start FUSE read
                                                         operation.  HW clears when read is complete and
                                                         the DAT is valid */
	uint64_t reserved_9_11                : 3;
	uint64_t efuse                        : 1;  /**< When set, return data from the efuse storage
                                                         rather than the local storage */
	uint64_t addr                         : 8;  /**< The byte address of the fuse to read */
#else
	uint64_t addr                         : 8;
	uint64_t efuse                        : 1;
	uint64_t reserved_9_11                : 3;
	uint64_t pend                         : 1;
	uint64_t reserved_13_15               : 3;
	uint64_t dat                          : 8;
	uint64_t reserved_24_63               : 40;
#endif
	} s;
	struct cvmx_mio_fus_rcmd_cn30xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_24_63               : 40;
	uint64_t dat                          : 8;  /**< 8bits of fuse data */
	uint64_t reserved_13_15               : 3;
	uint64_t pend                         : 1;  /**< SW sets this bit on a write to start FUSE read
                                                         operation.  HW clears when read is complete and
                                                         the DAT is valid */
	uint64_t reserved_9_11                : 3;
	uint64_t efuse                        : 1;  /**< When set, return data from the efuse storage
                                                         rather than the local storage for the 320 HW fuses */
	uint64_t reserved_7_7                 : 1;
	uint64_t addr                         : 7;  /**< The byte address of the fuse to read */
#else
	uint64_t addr                         : 7;
	uint64_t reserved_7_7                 : 1;
	uint64_t efuse                        : 1;
	uint64_t reserved_9_11                : 3;
	uint64_t pend                         : 1;
	uint64_t reserved_13_15               : 3;
	uint64_t dat                          : 8;
	uint64_t reserved_24_63               : 40;
#endif
	} cn30xx;
	struct cvmx_mio_fus_rcmd_cn30xx       cn31xx;
	struct cvmx_mio_fus_rcmd_cn30xx       cn38xx;
	struct cvmx_mio_fus_rcmd_cn30xx       cn38xxp2;
	struct cvmx_mio_fus_rcmd_cn30xx       cn50xx;
	struct cvmx_mio_fus_rcmd_s            cn52xx;
	struct cvmx_mio_fus_rcmd_s            cn52xxp1;
	struct cvmx_mio_fus_rcmd_s            cn56xx;
	struct cvmx_mio_fus_rcmd_s            cn56xxp1;
	struct cvmx_mio_fus_rcmd_cn30xx       cn58xx;
	struct cvmx_mio_fus_rcmd_cn30xx       cn58xxp1;
	struct cvmx_mio_fus_rcmd_s            cn61xx;
	struct cvmx_mio_fus_rcmd_s            cn63xx;
	struct cvmx_mio_fus_rcmd_s            cn63xxp1;
	struct cvmx_mio_fus_rcmd_s            cn66xx;
	struct cvmx_mio_fus_rcmd_s            cn68xx;
	struct cvmx_mio_fus_rcmd_s            cn68xxp1;
	struct cvmx_mio_fus_rcmd_s            cnf71xx;
};
typedef union cvmx_mio_fus_rcmd cvmx_mio_fus_rcmd_t;

/**
 * cvmx_mio_fus_read_times
 *
 * Notes:
 * IFB fuses are 0..1791
 * L6G fuses are 1792 to 2047
 *
 * The reset values are for IFB fuses for refclk up to 100MHZ when core PLL is enagaged
 *
 * If any of the formulas above result in a value less than zero, the corresponding
 * timing parameter should be set to zero.
 *
 * Prior to issuing a read to the fuse banks (via. MIO_FUS_RCMD), this register
 * should be written with the timing parameters which correspond to the fuse bank type (IFB vs L6G)
 * that will be read.
 *
 * This register should not be written while MIO_FUS_RCMD[PEND]=1.
 */
union cvmx_mio_fus_read_times {
	uint64_t u64;
	struct cvmx_mio_fus_read_times_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_26_63               : 38;
	uint64_t sch                          : 4;  /**< Hold CS for (SCH+1) refclks after FSET desserts

                                                         SCH = (tSCH/refclk period)-1

                                                         For IFB: tSCH = 160ns
                                                         For L6G: tSCH =  10ns */
	uint64_t fsh                          : 4;  /**< Hold FSET for (FSH+1) refclks after PRCHG deasserts

                                                         FSH = (tFSH/refclk period)-1

                                                         For IFB: tFSH = 160ns
                                                         For L6G: tFSH =  10ns */
	uint64_t prh                          : 4;  /**< Assert PRCHG (PRH+1) refclks after SIGDEV deasserts

                                                         PRH = (tPRH/refclk period)-1

                                                         For IFB: tPRH =  70ns
                                                         For L6G: tPRH =  10ns */
	uint64_t sdh                          : 4;  /**< Hold SIGDEV for (SDH+1) refclks after FSET asserts

                                                         SDH = (tSDH/refclk period)-1

                                                         For IFB: tPRH =  10ns
                                                         For L6G: tPRH =  10ns */
	uint64_t setup                        : 10; /**< Assert CS for (SETUP+1) refclks before asserting
                                                         SIGDEV, FSET, or PRCHG

                                                         SETUP=(tRDS/refclk period)-1

                                                         For IFB: tRDS = 10000ns
                                                         For L6G: tRDS = max(tSCS,tSDS,tPRS)
                                                           where tSCS   = 10ns
                                                                 tSDS   = 10ns
                                                                 tPRS   = 10ns */
#else
	uint64_t setup                        : 10;
	uint64_t sdh                          : 4;
	uint64_t prh                          : 4;
	uint64_t fsh                          : 4;
	uint64_t sch                          : 4;
	uint64_t reserved_26_63               : 38;
#endif
	} s;
	struct cvmx_mio_fus_read_times_s      cn61xx;
	struct cvmx_mio_fus_read_times_s      cn63xx;
	struct cvmx_mio_fus_read_times_s      cn63xxp1;
	struct cvmx_mio_fus_read_times_s      cn66xx;
	struct cvmx_mio_fus_read_times_s      cn68xx;
	struct cvmx_mio_fus_read_times_s      cn68xxp1;
	struct cvmx_mio_fus_read_times_s      cnf71xx;
};
typedef union cvmx_mio_fus_read_times cvmx_mio_fus_read_times_t;

/**
 * cvmx_mio_fus_repair_res0
 */
union cvmx_mio_fus_repair_res0 {
	uint64_t u64;
	struct cvmx_mio_fus_repair_res0_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_55_63               : 9;
	uint64_t too_many                     : 1;  /**< Too many defects */
	uint64_t repair2                      : 18; /**< BISR Results */
	uint64_t repair1                      : 18; /**< BISR Results */
	uint64_t repair0                      : 18; /**< BISR Results */
#else
	uint64_t repair0                      : 18;
	uint64_t repair1                      : 18;
	uint64_t repair2                      : 18;
	uint64_t too_many                     : 1;
	uint64_t reserved_55_63               : 9;
#endif
	} s;
	struct cvmx_mio_fus_repair_res0_s     cn61xx;
	struct cvmx_mio_fus_repair_res0_s     cn63xx;
	struct cvmx_mio_fus_repair_res0_s     cn63xxp1;
	struct cvmx_mio_fus_repair_res0_s     cn66xx;
	struct cvmx_mio_fus_repair_res0_s     cn68xx;
	struct cvmx_mio_fus_repair_res0_s     cn68xxp1;
	struct cvmx_mio_fus_repair_res0_s     cnf71xx;
};
typedef union cvmx_mio_fus_repair_res0 cvmx_mio_fus_repair_res0_t;

/**
 * cvmx_mio_fus_repair_res1
 */
union cvmx_mio_fus_repair_res1 {
	uint64_t u64;
	struct cvmx_mio_fus_repair_res1_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_54_63               : 10;
	uint64_t repair5                      : 18; /**< BISR Results */
	uint64_t repair4                      : 18; /**< BISR Results */
	uint64_t repair3                      : 18; /**< BISR Results */
#else
	uint64_t repair3                      : 18;
	uint64_t repair4                      : 18;
	uint64_t repair5                      : 18;
	uint64_t reserved_54_63               : 10;
#endif
	} s;
	struct cvmx_mio_fus_repair_res1_s     cn61xx;
	struct cvmx_mio_fus_repair_res1_s     cn63xx;
	struct cvmx_mio_fus_repair_res1_s     cn63xxp1;
	struct cvmx_mio_fus_repair_res1_s     cn66xx;
	struct cvmx_mio_fus_repair_res1_s     cn68xx;
	struct cvmx_mio_fus_repair_res1_s     cn68xxp1;
	struct cvmx_mio_fus_repair_res1_s     cnf71xx;
};
typedef union cvmx_mio_fus_repair_res1 cvmx_mio_fus_repair_res1_t;

/**
 * cvmx_mio_fus_repair_res2
 */
union cvmx_mio_fus_repair_res2 {
	uint64_t u64;
	struct cvmx_mio_fus_repair_res2_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_18_63               : 46;
	uint64_t repair6                      : 18; /**< BISR Results */
#else
	uint64_t repair6                      : 18;
	uint64_t reserved_18_63               : 46;
#endif
	} s;
	struct cvmx_mio_fus_repair_res2_s     cn61xx;
	struct cvmx_mio_fus_repair_res2_s     cn63xx;
	struct cvmx_mio_fus_repair_res2_s     cn63xxp1;
	struct cvmx_mio_fus_repair_res2_s     cn66xx;
	struct cvmx_mio_fus_repair_res2_s     cn68xx;
	struct cvmx_mio_fus_repair_res2_s     cn68xxp1;
	struct cvmx_mio_fus_repair_res2_s     cnf71xx;
};
typedef union cvmx_mio_fus_repair_res2 cvmx_mio_fus_repair_res2_t;

/**
 * cvmx_mio_fus_spr_repair_res
 *
 * DON'T PUT IN HRM*
 *
 */
union cvmx_mio_fus_spr_repair_res {
	uint64_t u64;
	struct cvmx_mio_fus_spr_repair_res_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_42_63               : 22;
	uint64_t repair2                      : 14; /**< Reserved (see  MIO_FUS_REPAIR_RES*) */
	uint64_t repair1                      : 14; /**< Reserved (see  MIO_FUS_REPAIR_RES*) */
	uint64_t repair0                      : 14; /**< Reserved (see  MIO_FUS_REPAIR_RES*) */
#else
	uint64_t repair0                      : 14;
	uint64_t repair1                      : 14;
	uint64_t repair2                      : 14;
	uint64_t reserved_42_63               : 22;
#endif
	} s;
	struct cvmx_mio_fus_spr_repair_res_s  cn30xx;
	struct cvmx_mio_fus_spr_repair_res_s  cn31xx;
	struct cvmx_mio_fus_spr_repair_res_s  cn38xx;
	struct cvmx_mio_fus_spr_repair_res_s  cn50xx;
	struct cvmx_mio_fus_spr_repair_res_s  cn52xx;
	struct cvmx_mio_fus_spr_repair_res_s  cn52xxp1;
	struct cvmx_mio_fus_spr_repair_res_s  cn56xx;
	struct cvmx_mio_fus_spr_repair_res_s  cn56xxp1;
	struct cvmx_mio_fus_spr_repair_res_s  cn58xx;
	struct cvmx_mio_fus_spr_repair_res_s  cn58xxp1;
	struct cvmx_mio_fus_spr_repair_res_s  cn61xx;
	struct cvmx_mio_fus_spr_repair_res_s  cn63xx;
	struct cvmx_mio_fus_spr_repair_res_s  cn63xxp1;
	struct cvmx_mio_fus_spr_repair_res_s  cn66xx;
	struct cvmx_mio_fus_spr_repair_res_s  cn68xx;
	struct cvmx_mio_fus_spr_repair_res_s  cn68xxp1;
	struct cvmx_mio_fus_spr_repair_res_s  cnf71xx;
};
typedef union cvmx_mio_fus_spr_repair_res cvmx_mio_fus_spr_repair_res_t;

/**
 * cvmx_mio_fus_spr_repair_sum
 *
 * DON'T PUT IN HRM*
 *
 */
union cvmx_mio_fus_spr_repair_sum {
	uint64_t u64;
	struct cvmx_mio_fus_spr_repair_sum_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t too_many                     : 1;  /**< Reserved (see  MIO_FUS_REPAIR_RES*) */
#else
	uint64_t too_many                     : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} s;
	struct cvmx_mio_fus_spr_repair_sum_s  cn30xx;
	struct cvmx_mio_fus_spr_repair_sum_s  cn31xx;
	struct cvmx_mio_fus_spr_repair_sum_s  cn38xx;
	struct cvmx_mio_fus_spr_repair_sum_s  cn50xx;
	struct cvmx_mio_fus_spr_repair_sum_s  cn52xx;
	struct cvmx_mio_fus_spr_repair_sum_s  cn52xxp1;
	struct cvmx_mio_fus_spr_repair_sum_s  cn56xx;
	struct cvmx_mio_fus_spr_repair_sum_s  cn56xxp1;
	struct cvmx_mio_fus_spr_repair_sum_s  cn58xx;
	struct cvmx_mio_fus_spr_repair_sum_s  cn58xxp1;
	struct cvmx_mio_fus_spr_repair_sum_s  cn61xx;
	struct cvmx_mio_fus_spr_repair_sum_s  cn63xx;
	struct cvmx_mio_fus_spr_repair_sum_s  cn63xxp1;
	struct cvmx_mio_fus_spr_repair_sum_s  cn66xx;
	struct cvmx_mio_fus_spr_repair_sum_s  cn68xx;
	struct cvmx_mio_fus_spr_repair_sum_s  cn68xxp1;
	struct cvmx_mio_fus_spr_repair_sum_s  cnf71xx;
};
typedef union cvmx_mio_fus_spr_repair_sum cvmx_mio_fus_spr_repair_sum_t;

/**
 * cvmx_mio_fus_tgg
 *
 * Notes:
 * The TGG fuses are fuses[831:768].  The valid bit (TGG[63]) is fuse[831].
 *
 */
union cvmx_mio_fus_tgg {
	uint64_t u64;
	struct cvmx_mio_fus_tgg_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t val                          : 1;  /**< Out of reset, VAL will return the TGG[63] fuse.
                                                         Software may write this CSR bit to zero (to hide
                                                         the value of the TGG fuses).  Software cannot write
                                                         the valid bit to a one, so it is not possible to
                                                         read  the value of the TGG fuses after the valid
                                                         bit is clear.

                                                         It is never possible to read the value of the TGG
                                                         fuses directly (ie. the only way to read the value
                                                         of the TGG fuses is via the MIO_FUS_TGG CSR.)

                                                         Whenever the fuse corresponding to the valid bit
                                                         (ie. TGG[63]) is blown, it is not possible to blow
                                                         the other 63 TGG fuses.  (ie. only when the TGG[63]
                                                         fuse is not blown, the other 63 TGG fuses can be
                                                         blown.  The TGG[63] fuse is the one and only fuse
                                                         lockdown bit for the other 63 fuses TGG fuses.  No
                                                         other fuse lockdown bits can prevent blowing the 63
                                                         fuses. */
	uint64_t dat                          : 63; /**< Whenever VAL is clear, DAT will always read as
                                                         zero, regardless of the value of the TGG[62:0]
                                                         fuses.

                                                         Whenever VAL is set, DAT will match the value of
                                                         other 63 TGG fuses (ie. TGG[62:0]) */
#else
	uint64_t dat                          : 63;
	uint64_t val                          : 1;
#endif
	} s;
	struct cvmx_mio_fus_tgg_s             cn61xx;
	struct cvmx_mio_fus_tgg_s             cn66xx;
	struct cvmx_mio_fus_tgg_s             cnf71xx;
};
typedef union cvmx_mio_fus_tgg cvmx_mio_fus_tgg_t;

/**
 * cvmx_mio_fus_unlock
 */
union cvmx_mio_fus_unlock {
	uint64_t u64;
	struct cvmx_mio_fus_unlock_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_24_63               : 40;
	uint64_t key                          : 24; /**< When set to the typical value, allows SW to
                                                         program the efuses */
#else
	uint64_t key                          : 24;
	uint64_t reserved_24_63               : 40;
#endif
	} s;
	struct cvmx_mio_fus_unlock_s          cn30xx;
	struct cvmx_mio_fus_unlock_s          cn31xx;
};
typedef union cvmx_mio_fus_unlock cvmx_mio_fus_unlock_t;

/**
 * cvmx_mio_fus_wadr
 */
union cvmx_mio_fus_wadr {
	uint64_t u64;
	struct cvmx_mio_fus_wadr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_10_63               : 54;
	uint64_t addr                         : 10; /**< Which of the banks of 128 fuses to blow */
#else
	uint64_t addr                         : 10;
	uint64_t reserved_10_63               : 54;
#endif
	} s;
	struct cvmx_mio_fus_wadr_s            cn30xx;
	struct cvmx_mio_fus_wadr_s            cn31xx;
	struct cvmx_mio_fus_wadr_s            cn38xx;
	struct cvmx_mio_fus_wadr_s            cn38xxp2;
	struct cvmx_mio_fus_wadr_cn50xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_2_63                : 62;
	uint64_t addr                         : 2;  /**< Which of the four banks of 256 fuses to blow */
#else
	uint64_t addr                         : 2;
	uint64_t reserved_2_63                : 62;
#endif
	} cn50xx;
	struct cvmx_mio_fus_wadr_cn52xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_3_63                : 61;
	uint64_t addr                         : 3;  /**< Which of the four banks of 256 fuses to blow */
#else
	uint64_t addr                         : 3;
	uint64_t reserved_3_63                : 61;
#endif
	} cn52xx;
	struct cvmx_mio_fus_wadr_cn52xx       cn52xxp1;
	struct cvmx_mio_fus_wadr_cn52xx       cn56xx;
	struct cvmx_mio_fus_wadr_cn52xx       cn56xxp1;
	struct cvmx_mio_fus_wadr_cn50xx       cn58xx;
	struct cvmx_mio_fus_wadr_cn50xx       cn58xxp1;
	struct cvmx_mio_fus_wadr_cn61xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_4_63                : 60;
	uint64_t addr                         : 4;  /**< Which of the banks of 128 fuses to blow */
#else
	uint64_t addr                         : 4;
	uint64_t reserved_4_63                : 60;
#endif
	} cn61xx;
	struct cvmx_mio_fus_wadr_cn61xx       cn63xx;
	struct cvmx_mio_fus_wadr_cn61xx       cn63xxp1;
	struct cvmx_mio_fus_wadr_cn61xx       cn66xx;
	struct cvmx_mio_fus_wadr_cn61xx       cn68xx;
	struct cvmx_mio_fus_wadr_cn61xx       cn68xxp1;
	struct cvmx_mio_fus_wadr_cn61xx       cnf71xx;
};
typedef union cvmx_mio_fus_wadr cvmx_mio_fus_wadr_t;

/**
 * cvmx_mio_gpio_comp
 *
 * MIO_GPIO_COMP = MIO GPIO Compensation Register
 *
 */
union cvmx_mio_gpio_comp {
	uint64_t u64;
	struct cvmx_mio_gpio_comp_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_12_63               : 52;
	uint64_t pctl                         : 6;  /**< GPIO bus PCTL */
	uint64_t nctl                         : 6;  /**< GPIO bus NCTL */
#else
	uint64_t nctl                         : 6;
	uint64_t pctl                         : 6;
	uint64_t reserved_12_63               : 52;
#endif
	} s;
	struct cvmx_mio_gpio_comp_s           cn61xx;
	struct cvmx_mio_gpio_comp_s           cn63xx;
	struct cvmx_mio_gpio_comp_s           cn63xxp1;
	struct cvmx_mio_gpio_comp_s           cn66xx;
	struct cvmx_mio_gpio_comp_s           cn68xx;
	struct cvmx_mio_gpio_comp_s           cn68xxp1;
	struct cvmx_mio_gpio_comp_s           cnf71xx;
};
typedef union cvmx_mio_gpio_comp cvmx_mio_gpio_comp_t;

/**
 * cvmx_mio_ndf_dma_cfg
 *
 * MIO_NDF_DMA_CFG = MIO NAND Flash DMA Config Register
 *
 * SIZE is specified in number of 64 bit transfers (encoded in -1 notation).
 *
 * ADR must be 64 bit aligned.
 */
union cvmx_mio_ndf_dma_cfg {
	uint64_t u64;
	struct cvmx_mio_ndf_dma_cfg_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t en                           : 1;  /**< DMA Engine enable */
	uint64_t rw                           : 1;  /**< DMA Engine R/W bit (0 = read, 1 = write) */
	uint64_t clr                          : 1;  /**< DMA Engine clear EN on device terminated burst */
	uint64_t reserved_60_60               : 1;
	uint64_t swap32                       : 1;  /**< DMA Engine 32 bit swap */
	uint64_t swap16                       : 1;  /**< DMA Engine 16 bit swap */
	uint64_t swap8                        : 1;  /**< DMA Engine 8 bit swap */
	uint64_t endian                       : 1;  /**< DMA Engine NCB endian mode (0 = big, 1 = little) */
	uint64_t size                         : 20; /**< DMA Engine size */
	uint64_t adr                          : 36; /**< DMA Engine address */
#else
	uint64_t adr                          : 36;
	uint64_t size                         : 20;
	uint64_t endian                       : 1;
	uint64_t swap8                        : 1;
	uint64_t swap16                       : 1;
	uint64_t swap32                       : 1;
	uint64_t reserved_60_60               : 1;
	uint64_t clr                          : 1;
	uint64_t rw                           : 1;
	uint64_t en                           : 1;
#endif
	} s;
	struct cvmx_mio_ndf_dma_cfg_s         cn52xx;
	struct cvmx_mio_ndf_dma_cfg_s         cn61xx;
	struct cvmx_mio_ndf_dma_cfg_s         cn63xx;
	struct cvmx_mio_ndf_dma_cfg_s         cn63xxp1;
	struct cvmx_mio_ndf_dma_cfg_s         cn66xx;
	struct cvmx_mio_ndf_dma_cfg_s         cn68xx;
	struct cvmx_mio_ndf_dma_cfg_s         cn68xxp1;
	struct cvmx_mio_ndf_dma_cfg_s         cnf71xx;
};
typedef union cvmx_mio_ndf_dma_cfg cvmx_mio_ndf_dma_cfg_t;

/**
 * cvmx_mio_ndf_dma_int
 *
 * MIO_NDF_DMA_INT = MIO NAND Flash DMA Interrupt Register
 *
 */
union cvmx_mio_ndf_dma_int {
	uint64_t u64;
	struct cvmx_mio_ndf_dma_int_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t done                         : 1;  /**< DMA Engine request completion interrupt */
#else
	uint64_t done                         : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} s;
	struct cvmx_mio_ndf_dma_int_s         cn52xx;
	struct cvmx_mio_ndf_dma_int_s         cn61xx;
	struct cvmx_mio_ndf_dma_int_s         cn63xx;
	struct cvmx_mio_ndf_dma_int_s         cn63xxp1;
	struct cvmx_mio_ndf_dma_int_s         cn66xx;
	struct cvmx_mio_ndf_dma_int_s         cn68xx;
	struct cvmx_mio_ndf_dma_int_s         cn68xxp1;
	struct cvmx_mio_ndf_dma_int_s         cnf71xx;
};
typedef union cvmx_mio_ndf_dma_int cvmx_mio_ndf_dma_int_t;

/**
 * cvmx_mio_ndf_dma_int_en
 *
 * MIO_NDF_DMA_INT_EN = MIO NAND Flash DMA Interrupt Enable Register
 *
 */
union cvmx_mio_ndf_dma_int_en {
	uint64_t u64;
	struct cvmx_mio_ndf_dma_int_en_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t done                         : 1;  /**< DMA Engine request completion interrupt enable */
#else
	uint64_t done                         : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} s;
	struct cvmx_mio_ndf_dma_int_en_s      cn52xx;
	struct cvmx_mio_ndf_dma_int_en_s      cn61xx;
	struct cvmx_mio_ndf_dma_int_en_s      cn63xx;
	struct cvmx_mio_ndf_dma_int_en_s      cn63xxp1;
	struct cvmx_mio_ndf_dma_int_en_s      cn66xx;
	struct cvmx_mio_ndf_dma_int_en_s      cn68xx;
	struct cvmx_mio_ndf_dma_int_en_s      cn68xxp1;
	struct cvmx_mio_ndf_dma_int_en_s      cnf71xx;
};
typedef union cvmx_mio_ndf_dma_int_en cvmx_mio_ndf_dma_int_en_t;

/**
 * cvmx_mio_pll_ctl
 */
union cvmx_mio_pll_ctl {
	uint64_t u64;
	struct cvmx_mio_pll_ctl_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_5_63                : 59;
	uint64_t bw_ctl                       : 5;  /**< Core PLL bandwidth control */
#else
	uint64_t bw_ctl                       : 5;
	uint64_t reserved_5_63                : 59;
#endif
	} s;
	struct cvmx_mio_pll_ctl_s             cn30xx;
	struct cvmx_mio_pll_ctl_s             cn31xx;
};
typedef union cvmx_mio_pll_ctl cvmx_mio_pll_ctl_t;

/**
 * cvmx_mio_pll_setting
 */
union cvmx_mio_pll_setting {
	uint64_t u64;
	struct cvmx_mio_pll_setting_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_17_63               : 47;
	uint64_t setting                      : 17; /**< Core PLL setting */
#else
	uint64_t setting                      : 17;
	uint64_t reserved_17_63               : 47;
#endif
	} s;
	struct cvmx_mio_pll_setting_s         cn30xx;
	struct cvmx_mio_pll_setting_s         cn31xx;
};
typedef union cvmx_mio_pll_setting cvmx_mio_pll_setting_t;

/**
 * cvmx_mio_ptp_ckout_hi_incr
 *
 * MIO_PTP_CKOUT_HI_INCR = PTP Clock Out Hi Increment
 *
 */
union cvmx_mio_ptp_ckout_hi_incr {
	uint64_t u64;
	struct cvmx_mio_ptp_ckout_hi_incr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t nanosec                      : 32; /**< Nanoseconds */
	uint64_t frnanosec                    : 32; /**< Fractions of Nanoseconds */
#else
	uint64_t frnanosec                    : 32;
	uint64_t nanosec                      : 32;
#endif
	} s;
	struct cvmx_mio_ptp_ckout_hi_incr_s   cn61xx;
	struct cvmx_mio_ptp_ckout_hi_incr_s   cn66xx;
	struct cvmx_mio_ptp_ckout_hi_incr_s   cn68xx;
	struct cvmx_mio_ptp_ckout_hi_incr_s   cnf71xx;
};
typedef union cvmx_mio_ptp_ckout_hi_incr cvmx_mio_ptp_ckout_hi_incr_t;

/**
 * cvmx_mio_ptp_ckout_lo_incr
 *
 * MIO_PTP_CKOUT_LO_INCR = PTP Clock Out Lo Increment
 *
 */
union cvmx_mio_ptp_ckout_lo_incr {
	uint64_t u64;
	struct cvmx_mio_ptp_ckout_lo_incr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t nanosec                      : 32; /**< Nanoseconds */
	uint64_t frnanosec                    : 32; /**< Fractions of Nanoseconds */
#else
	uint64_t frnanosec                    : 32;
	uint64_t nanosec                      : 32;
#endif
	} s;
	struct cvmx_mio_ptp_ckout_lo_incr_s   cn61xx;
	struct cvmx_mio_ptp_ckout_lo_incr_s   cn66xx;
	struct cvmx_mio_ptp_ckout_lo_incr_s   cn68xx;
	struct cvmx_mio_ptp_ckout_lo_incr_s   cnf71xx;
};
typedef union cvmx_mio_ptp_ckout_lo_incr cvmx_mio_ptp_ckout_lo_incr_t;

/**
 * cvmx_mio_ptp_ckout_thresh_hi
 *
 * MIO_PTP_CKOUT_THRESH_HI = Hi bytes of PTP Clock Out
 *
 * Writes to MIO_PTP_CKOUT_THRESH_HI also clear MIO_PTP_CKOUT_THRESH_LO. To update all 96 bits, write MIO_PTP_CKOUT_THRESH_HI followed
 * by MIO_PTP_CKOUT_THRESH_LO
 */
union cvmx_mio_ptp_ckout_thresh_hi {
	uint64_t u64;
	struct cvmx_mio_ptp_ckout_thresh_hi_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t nanosec                      : 64; /**< Nanoseconds */
#else
	uint64_t nanosec                      : 64;
#endif
	} s;
	struct cvmx_mio_ptp_ckout_thresh_hi_s cn61xx;
	struct cvmx_mio_ptp_ckout_thresh_hi_s cn66xx;
	struct cvmx_mio_ptp_ckout_thresh_hi_s cn68xx;
	struct cvmx_mio_ptp_ckout_thresh_hi_s cnf71xx;
};
typedef union cvmx_mio_ptp_ckout_thresh_hi cvmx_mio_ptp_ckout_thresh_hi_t;

/**
 * cvmx_mio_ptp_ckout_thresh_lo
 *
 * MIO_PTP_CKOUT_THRESH_LO = Lo bytes of PTP Clock Out
 *
 */
union cvmx_mio_ptp_ckout_thresh_lo {
	uint64_t u64;
	struct cvmx_mio_ptp_ckout_thresh_lo_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_32_63               : 32;
	uint64_t frnanosec                    : 32; /**< Fractions of Nanoseconds */
#else
	uint64_t frnanosec                    : 32;
	uint64_t reserved_32_63               : 32;
#endif
	} s;
	struct cvmx_mio_ptp_ckout_thresh_lo_s cn61xx;
	struct cvmx_mio_ptp_ckout_thresh_lo_s cn66xx;
	struct cvmx_mio_ptp_ckout_thresh_lo_s cn68xx;
	struct cvmx_mio_ptp_ckout_thresh_lo_s cnf71xx;
};
typedef union cvmx_mio_ptp_ckout_thresh_lo cvmx_mio_ptp_ckout_thresh_lo_t;

/**
 * cvmx_mio_ptp_clock_cfg
 *
 * MIO_PTP_CLOCK_CFG = Configuration
 *
 */
union cvmx_mio_ptp_clock_cfg {
	uint64_t u64;
	struct cvmx_mio_ptp_clock_cfg_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_42_63               : 22;
	uint64_t pps                          : 1;  /**< PTP PPS Output
                                                         reflects ptp__pps after PPS_INV inverter */
	uint64_t ckout                        : 1;  /**< PTP Clock Output
                                                         reflects ptp__ckout after CKOUT_INV inverter */
	uint64_t ext_clk_edge                 : 2;  /**< External Clock input edge
                                                         00 = rising edge
                                                         01 = falling edge
                                                         10 = both rising & falling edge
                                                         11 = reserved */
	uint64_t ckout_out4                   : 1;  /**< Destination for PTP Clock Out output
                                                         See CKOUT_OUT */
	uint64_t pps_out                      : 5;  /**< Destination for PTP PPS output to GPIO
                                                         0-19 : GPIO[PPS_OUT[4:0]]
                                                         - 20:30: Reserved
                                                         31   : Disabled
                                                         This should be different from CKOUT_OUT */
	uint64_t pps_inv                      : 1;  /**< Invert PTP PPS
                                                         0 = don't invert
                                                         1 = invert */
	uint64_t pps_en                       : 1;  /**< Enable PTP PPS */
	uint64_t ckout_out                    : 4;  /**< Destination for PTP Clock Out output to GPIO
                                                         0-19 : GPIO[[CKOUT_OUT4,CKOUT_OUT[3:0]]]
                                                         - 20:30: Reserved
                                                         31   : Disabled
                                                         This should be different from PPS_OUT */
	uint64_t ckout_inv                    : 1;  /**< Invert PTP Clock Out
                                                         0 = don't invert
                                                         1 = invert */
	uint64_t ckout_en                     : 1;  /**< Enable PTP Clock Out */
	uint64_t evcnt_in                     : 6;  /**< Source for event counter input
                                                         0x00-0x0f : GPIO[EVCNT_IN[3:0]]
                                                         0x20      : GPIO[16]
                                                         0x21      : GPIO[17]
                                                         0x22      : GPIO[18]
                                                         0x23      : GPIO[19]
                                                         0x10      : QLM0_REF_CLK
                                                         0x11      : QLM1_REF_CLK
                                                         0x18      : RF_MCLK (PHY pin)
                                                         0x12-0x17 : Reserved
                                                         0x19-0x1f : Reserved
                                                         0x24-0x3f : Reserved */
	uint64_t evcnt_edge                   : 1;  /**< Event counter input edge
                                                         0 = falling edge
                                                         1 = rising edge */
	uint64_t evcnt_en                     : 1;  /**< Enable event counter */
	uint64_t tstmp_in                     : 6;  /**< Source for timestamp input
                                                         0x00-0x0f : GPIO[TSTMP_IN[3:0]]
                                                         0x20      : GPIO[16]
                                                         0x21      : GPIO[17]
                                                         0x22      : GPIO[18]
                                                         0x23      : GPIO[19]
                                                         0x10      : QLM0_REF_CLK
                                                         0x11      : QLM1_REF_CLK
                                                         0x18      : RF_MCLK (PHY pin)
                                                         0x12-0x17 : Reserved
                                                         0x19-0x1f : Reserved
                                                         0x24-0x3f : Reserved */
	uint64_t tstmp_edge                   : 1;  /**< External timestamp input edge
                                                         0 = falling edge
                                                         1 = rising edge */
	uint64_t tstmp_en                     : 1;  /**< Enable external timestamp */
	uint64_t ext_clk_in                   : 6;  /**< Source for external clock
                                                         0x00-0x0f : GPIO[EXT_CLK_IN[3:0]]
                                                         0x20      : GPIO[16]
                                                         0x21      : GPIO[17]
                                                         0x22      : GPIO[18]
                                                         0x23      : GPIO[19]
                                                         0x10      : QLM0_REF_CLK
                                                         0x11      : QLM1_REF_CLK
                                                         0x18      : RF_MCLK (PHY pin)
                                                         0x12-0x17 : Reserved
                                                         0x19-0x1f : Reserved
                                                         0x24-0x3f : Reserved */
	uint64_t ext_clk_en                   : 1;  /**< Use external clock */
	uint64_t ptp_en                       : 1;  /**< Enable PTP Module */
#else
	uint64_t ptp_en                       : 1;
	uint64_t ext_clk_en                   : 1;
	uint64_t ext_clk_in                   : 6;
	uint64_t tstmp_en                     : 1;
	uint64_t tstmp_edge                   : 1;
	uint64_t tstmp_in                     : 6;
	uint64_t evcnt_en                     : 1;
	uint64_t evcnt_edge                   : 1;
	uint64_t evcnt_in                     : 6;
	uint64_t ckout_en                     : 1;
	uint64_t ckout_inv                    : 1;
	uint64_t ckout_out                    : 4;
	uint64_t pps_en                       : 1;
	uint64_t pps_inv                      : 1;
	uint64_t pps_out                      : 5;
	uint64_t ckout_out4                   : 1;
	uint64_t ext_clk_edge                 : 2;
	uint64_t ckout                        : 1;
	uint64_t pps                          : 1;
	uint64_t reserved_42_63               : 22;
#endif
	} s;
	struct cvmx_mio_ptp_clock_cfg_s       cn61xx;
	struct cvmx_mio_ptp_clock_cfg_cn63xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_24_63               : 40;
	uint64_t evcnt_in                     : 6;  /**< Source for event counter input
                                                         0x00-0x0f : GPIO[EVCNT_IN[3:0]]
                                                         0x10      : QLM0_REF_CLK
                                                         0x11      : QLM1_REF_CLK
                                                         0x12      : QLM2_REF_CLK
                                                         0x13-0x3f : Reserved */
	uint64_t evcnt_edge                   : 1;  /**< Event counter input edge
                                                         0 = falling edge
                                                         1 = rising edge */
	uint64_t evcnt_en                     : 1;  /**< Enable event counter */
	uint64_t tstmp_in                     : 6;  /**< Source for timestamp input
                                                         0x00-0x0f : GPIO[TSTMP_IN[3:0]]
                                                         0x10      : QLM0_REF_CLK
                                                         0x11      : QLM1_REF_CLK
                                                         0x12      : QLM2_REF_CLK
                                                         0x13-0x3f : Reserved */
	uint64_t tstmp_edge                   : 1;  /**< External timestamp input edge
                                                         0 = falling edge
                                                         1 = rising edge */
	uint64_t tstmp_en                     : 1;  /**< Enable external timestamp */
	uint64_t ext_clk_in                   : 6;  /**< Source for external clock
                                                         0x00-0x0f : GPIO[EXT_CLK_IN[3:0]]
                                                         0x10      : QLM0_REF_CLK
                                                         0x11      : QLM1_REF_CLK
                                                         0x12      : QLM2_REF_CLK
                                                         0x13-0x3f : Reserved */
	uint64_t ext_clk_en                   : 1;  /**< Use positive edge of external clock */
	uint64_t ptp_en                       : 1;  /**< Enable PTP Module */
#else
	uint64_t ptp_en                       : 1;
	uint64_t ext_clk_en                   : 1;
	uint64_t ext_clk_in                   : 6;
	uint64_t tstmp_en                     : 1;
	uint64_t tstmp_edge                   : 1;
	uint64_t tstmp_in                     : 6;
	uint64_t evcnt_en                     : 1;
	uint64_t evcnt_edge                   : 1;
	uint64_t evcnt_in                     : 6;
	uint64_t reserved_24_63               : 40;
#endif
	} cn63xx;
	struct cvmx_mio_ptp_clock_cfg_cn63xx  cn63xxp1;
	struct cvmx_mio_ptp_clock_cfg_cn66xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_40_63               : 24;
	uint64_t ext_clk_edge                 : 2;  /**< External Clock input edge
                                                         00 = rising edge
                                                         01 = falling edge
                                                         10 = both rising & falling edge
                                                         11 = reserved */
	uint64_t ckout_out4                   : 1;  /**< Destination for PTP Clock Out output
                                                         0-19 : GPIO[[CKOUT_OUT4,CKOUT_OUT[3:0]]]
                                                         This should be different from PPS_OUT */
	uint64_t pps_out                      : 5;  /**< Destination for PTP PPS output
                                                         0-19 : GPIO[PPS_OUT[4:0]]
                                                         This should be different from CKOUT_OUT */
	uint64_t pps_inv                      : 1;  /**< Invert PTP PPS
                                                         0 = don't invert
                                                         1 = invert */
	uint64_t pps_en                       : 1;  /**< Enable PTP PPS */
	uint64_t ckout_out                    : 4;  /**< Destination for PTP Clock Out output
                                                         0-19 : GPIO[[CKOUT_OUT4,CKOUT_OUT[3:0]]]
                                                         This should be different from PPS_OUT */
	uint64_t ckout_inv                    : 1;  /**< Invert PTP Clock Out
                                                         0 = don't invert
                                                         1 = invert */
	uint64_t ckout_en                     : 1;  /**< Enable PTP Clock Out */
	uint64_t evcnt_in                     : 6;  /**< Source for event counter input
                                                         0x00-0x0f : GPIO[EVCNT_IN[3:0]]
                                                         0x20      : GPIO[16]
                                                         0x21      : GPIO[17]
                                                         0x22      : GPIO[18]
                                                         0x23      : GPIO[19]
                                                         0x10      : QLM0_REF_CLK
                                                         0x11      : QLM1_REF_CLK
                                                         0x12      : QLM2_REF_CLK
                                                         0x13-0x1f : Reserved
                                                         0x24-0x3f : Reserved */
	uint64_t evcnt_edge                   : 1;  /**< Event counter input edge
                                                         0 = falling edge
                                                         1 = rising edge */
	uint64_t evcnt_en                     : 1;  /**< Enable event counter */
	uint64_t tstmp_in                     : 6;  /**< Source for timestamp input
                                                         0x00-0x0f : GPIO[TSTMP_IN[3:0]]
                                                         0x20      : GPIO[16]
                                                         0x21      : GPIO[17]
                                                         0x22      : GPIO[18]
                                                         0x23      : GPIO[19]
                                                         0x10      : QLM0_REF_CLK
                                                         0x11      : QLM1_REF_CLK
                                                         0x12      : QLM2_REF_CLK
                                                         0x13-0x1f : Reserved
                                                         0x24-0x3f : Reserved */
	uint64_t tstmp_edge                   : 1;  /**< External timestamp input edge
                                                         0 = falling edge
                                                         1 = rising edge */
	uint64_t tstmp_en                     : 1;  /**< Enable external timestamp */
	uint64_t ext_clk_in                   : 6;  /**< Source for external clock
                                                         0x00-0x0f : GPIO[EXT_CLK_IN[3:0]]
                                                         0x20      : GPIO[16]
                                                         0x21      : GPIO[17]
                                                         0x22      : GPIO[18]
                                                         0x23      : GPIO[19]
                                                         0x10      : QLM0_REF_CLK
                                                         0x11      : QLM1_REF_CLK
                                                         0x12      : QLM2_REF_CLK
                                                         0x13-0x1f : Reserved
                                                         0x24-0x3f : Reserved */
	uint64_t ext_clk_en                   : 1;  /**< Use external clock */
	uint64_t ptp_en                       : 1;  /**< Enable PTP Module */
#else
	uint64_t ptp_en                       : 1;
	uint64_t ext_clk_en                   : 1;
	uint64_t ext_clk_in                   : 6;
	uint64_t tstmp_en                     : 1;
	uint64_t tstmp_edge                   : 1;
	uint64_t tstmp_in                     : 6;
	uint64_t evcnt_en                     : 1;
	uint64_t evcnt_edge                   : 1;
	uint64_t evcnt_in                     : 6;
	uint64_t ckout_en                     : 1;
	uint64_t ckout_inv                    : 1;
	uint64_t ckout_out                    : 4;
	uint64_t pps_en                       : 1;
	uint64_t pps_inv                      : 1;
	uint64_t pps_out                      : 5;
	uint64_t ckout_out4                   : 1;
	uint64_t ext_clk_edge                 : 2;
	uint64_t reserved_40_63               : 24;
#endif
	} cn66xx;
	struct cvmx_mio_ptp_clock_cfg_s       cn68xx;
	struct cvmx_mio_ptp_clock_cfg_cn63xx  cn68xxp1;
	struct cvmx_mio_ptp_clock_cfg_s       cnf71xx;
};
typedef union cvmx_mio_ptp_clock_cfg cvmx_mio_ptp_clock_cfg_t;

/**
 * cvmx_mio_ptp_clock_comp
 *
 * MIO_PTP_CLOCK_COMP = Compensator
 *
 */
union cvmx_mio_ptp_clock_comp {
	uint64_t u64;
	struct cvmx_mio_ptp_clock_comp_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t nanosec                      : 32; /**< Nanoseconds */
	uint64_t frnanosec                    : 32; /**< Fractions of Nanoseconds */
#else
	uint64_t frnanosec                    : 32;
	uint64_t nanosec                      : 32;
#endif
	} s;
	struct cvmx_mio_ptp_clock_comp_s      cn61xx;
	struct cvmx_mio_ptp_clock_comp_s      cn63xx;
	struct cvmx_mio_ptp_clock_comp_s      cn63xxp1;
	struct cvmx_mio_ptp_clock_comp_s      cn66xx;
	struct cvmx_mio_ptp_clock_comp_s      cn68xx;
	struct cvmx_mio_ptp_clock_comp_s      cn68xxp1;
	struct cvmx_mio_ptp_clock_comp_s      cnf71xx;
};
typedef union cvmx_mio_ptp_clock_comp cvmx_mio_ptp_clock_comp_t;

/**
 * cvmx_mio_ptp_clock_hi
 *
 * MIO_PTP_CLOCK_HI = Hi bytes of CLOCK
 *
 * Writes to MIO_PTP_CLOCK_HI also clear MIO_PTP_CLOCK_LO. To update all 96 bits, write MIO_PTP_CLOCK_HI followed
 * by MIO_PTP_CLOCK_LO
 */
union cvmx_mio_ptp_clock_hi {
	uint64_t u64;
	struct cvmx_mio_ptp_clock_hi_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t nanosec                      : 64; /**< Nanoseconds */
#else
	uint64_t nanosec                      : 64;
#endif
	} s;
	struct cvmx_mio_ptp_clock_hi_s        cn61xx;
	struct cvmx_mio_ptp_clock_hi_s        cn63xx;
	struct cvmx_mio_ptp_clock_hi_s        cn63xxp1;
	struct cvmx_mio_ptp_clock_hi_s        cn66xx;
	struct cvmx_mio_ptp_clock_hi_s        cn68xx;
	struct cvmx_mio_ptp_clock_hi_s        cn68xxp1;
	struct cvmx_mio_ptp_clock_hi_s        cnf71xx;
};
typedef union cvmx_mio_ptp_clock_hi cvmx_mio_ptp_clock_hi_t;

/**
 * cvmx_mio_ptp_clock_lo
 *
 * MIO_PTP_CLOCK_LO = Lo bytes of CLOCK
 *
 */
union cvmx_mio_ptp_clock_lo {
	uint64_t u64;
	struct cvmx_mio_ptp_clock_lo_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_32_63               : 32;
	uint64_t frnanosec                    : 32; /**< Fractions of Nanoseconds */
#else
	uint64_t frnanosec                    : 32;
	uint64_t reserved_32_63               : 32;
#endif
	} s;
	struct cvmx_mio_ptp_clock_lo_s        cn61xx;
	struct cvmx_mio_ptp_clock_lo_s        cn63xx;
	struct cvmx_mio_ptp_clock_lo_s        cn63xxp1;
	struct cvmx_mio_ptp_clock_lo_s        cn66xx;
	struct cvmx_mio_ptp_clock_lo_s        cn68xx;
	struct cvmx_mio_ptp_clock_lo_s        cn68xxp1;
	struct cvmx_mio_ptp_clock_lo_s        cnf71xx;
};
typedef union cvmx_mio_ptp_clock_lo cvmx_mio_ptp_clock_lo_t;

/**
 * cvmx_mio_ptp_evt_cnt
 *
 * MIO_PTP_EVT_CNT = Event Counter
 *
 * Writes to MIO_PTP_EVT_CNT increment this register by the written data. The register counts down by
 * 1 for every MIO_PTP_CLOCK_CFG[EVCNT_EDGE] edge of MIO_PTP_CLOCK_CFG[EVCNT_IN]. When register equals
 * 0, an interrupt gets gerated
 */
union cvmx_mio_ptp_evt_cnt {
	uint64_t u64;
	struct cvmx_mio_ptp_evt_cnt_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t cntr                         : 64; /**< Nanoseconds */
#else
	uint64_t cntr                         : 64;
#endif
	} s;
	struct cvmx_mio_ptp_evt_cnt_s         cn61xx;
	struct cvmx_mio_ptp_evt_cnt_s         cn63xx;
	struct cvmx_mio_ptp_evt_cnt_s         cn63xxp1;
	struct cvmx_mio_ptp_evt_cnt_s         cn66xx;
	struct cvmx_mio_ptp_evt_cnt_s         cn68xx;
	struct cvmx_mio_ptp_evt_cnt_s         cn68xxp1;
	struct cvmx_mio_ptp_evt_cnt_s         cnf71xx;
};
typedef union cvmx_mio_ptp_evt_cnt cvmx_mio_ptp_evt_cnt_t;

/**
 * cvmx_mio_ptp_phy_1pps_in
 *
 * MIO_PTP_PHY_1PPS_IN = PHY 1PPS input mux selection
 *
 */
union cvmx_mio_ptp_phy_1pps_in {
	uint64_t u64;
	struct cvmx_mio_ptp_phy_1pps_in_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_5_63                : 59;
	uint64_t sel                          : 5;  /**< Source for PHY 1pps input signal
                                                         0-19 : GPIO[SEL[4:0]], for AGPS_1PPS
                                                         24   : PPS_OUT (Enabled by PPS_EN and PPS_INV,
                                                                reflects ptp_pps after PPS_INV inverter)
                                                         - 20-23: Reserved
                                                         - 25-30: Reserved
                                                         31   : Disabled */
#else
	uint64_t sel                          : 5;
	uint64_t reserved_5_63                : 59;
#endif
	} s;
	struct cvmx_mio_ptp_phy_1pps_in_s     cnf71xx;
};
typedef union cvmx_mio_ptp_phy_1pps_in cvmx_mio_ptp_phy_1pps_in_t;

/**
 * cvmx_mio_ptp_pps_hi_incr
 *
 * MIO_PTP_PPS_HI_INCR = PTP PPS Hi Increment
 *
 */
union cvmx_mio_ptp_pps_hi_incr {
	uint64_t u64;
	struct cvmx_mio_ptp_pps_hi_incr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t nanosec                      : 32; /**< Nanoseconds */
	uint64_t frnanosec                    : 32; /**< Fractions of Nanoseconds */
#else
	uint64_t frnanosec                    : 32;
	uint64_t nanosec                      : 32;
#endif
	} s;
	struct cvmx_mio_ptp_pps_hi_incr_s     cn61xx;
	struct cvmx_mio_ptp_pps_hi_incr_s     cn66xx;
	struct cvmx_mio_ptp_pps_hi_incr_s     cn68xx;
	struct cvmx_mio_ptp_pps_hi_incr_s     cnf71xx;
};
typedef union cvmx_mio_ptp_pps_hi_incr cvmx_mio_ptp_pps_hi_incr_t;

/**
 * cvmx_mio_ptp_pps_lo_incr
 *
 * MIO_PTP_PPS_LO_INCR = PTP PPS Lo Increment
 *
 */
union cvmx_mio_ptp_pps_lo_incr {
	uint64_t u64;
	struct cvmx_mio_ptp_pps_lo_incr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t nanosec                      : 32; /**< Nanoseconds */
	uint64_t frnanosec                    : 32; /**< Fractions of Nanoseconds */
#else
	uint64_t frnanosec                    : 32;
	uint64_t nanosec                      : 32;
#endif
	} s;
	struct cvmx_mio_ptp_pps_lo_incr_s     cn61xx;
	struct cvmx_mio_ptp_pps_lo_incr_s     cn66xx;
	struct cvmx_mio_ptp_pps_lo_incr_s     cn68xx;
	struct cvmx_mio_ptp_pps_lo_incr_s     cnf71xx;
};
typedef union cvmx_mio_ptp_pps_lo_incr cvmx_mio_ptp_pps_lo_incr_t;

/**
 * cvmx_mio_ptp_pps_thresh_hi
 *
 * MIO_PTP_PPS_THRESH_HI = Hi bytes of PTP PPS
 *
 * Writes to MIO_PTP_PPS_THRESH_HI also clear MIO_PTP_PPS_THRESH_LO. To update all 96 bits, write MIO_PTP_PPS_THRESH_HI followed
 * by MIO_PTP_PPS_THRESH_LO
 */
union cvmx_mio_ptp_pps_thresh_hi {
	uint64_t u64;
	struct cvmx_mio_ptp_pps_thresh_hi_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t nanosec                      : 64; /**< Nanoseconds */
#else
	uint64_t nanosec                      : 64;
#endif
	} s;
	struct cvmx_mio_ptp_pps_thresh_hi_s   cn61xx;
	struct cvmx_mio_ptp_pps_thresh_hi_s   cn66xx;
	struct cvmx_mio_ptp_pps_thresh_hi_s   cn68xx;
	struct cvmx_mio_ptp_pps_thresh_hi_s   cnf71xx;
};
typedef union cvmx_mio_ptp_pps_thresh_hi cvmx_mio_ptp_pps_thresh_hi_t;

/**
 * cvmx_mio_ptp_pps_thresh_lo
 *
 * MIO_PTP_PPS_THRESH_LO = Lo bytes of PTP PPS
 *
 */
union cvmx_mio_ptp_pps_thresh_lo {
	uint64_t u64;
	struct cvmx_mio_ptp_pps_thresh_lo_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_32_63               : 32;
	uint64_t frnanosec                    : 32; /**< Fractions of Nanoseconds */
#else
	uint64_t frnanosec                    : 32;
	uint64_t reserved_32_63               : 32;
#endif
	} s;
	struct cvmx_mio_ptp_pps_thresh_lo_s   cn61xx;
	struct cvmx_mio_ptp_pps_thresh_lo_s   cn66xx;
	struct cvmx_mio_ptp_pps_thresh_lo_s   cn68xx;
	struct cvmx_mio_ptp_pps_thresh_lo_s   cnf71xx;
};
typedef union cvmx_mio_ptp_pps_thresh_lo cvmx_mio_ptp_pps_thresh_lo_t;

/**
 * cvmx_mio_ptp_timestamp
 *
 * MIO_PTP_TIMESTAMP = Timestamp latched on MIO_PTP_CLOCK_CFG[TSTMP_EDGE] edge of MIO_PTP_CLOCK_CFG[TSTMP_IN]
 *
 */
union cvmx_mio_ptp_timestamp {
	uint64_t u64;
	struct cvmx_mio_ptp_timestamp_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t nanosec                      : 64; /**< Nanoseconds */
#else
	uint64_t nanosec                      : 64;
#endif
	} s;
	struct cvmx_mio_ptp_timestamp_s       cn61xx;
	struct cvmx_mio_ptp_timestamp_s       cn63xx;
	struct cvmx_mio_ptp_timestamp_s       cn63xxp1;
	struct cvmx_mio_ptp_timestamp_s       cn66xx;
	struct cvmx_mio_ptp_timestamp_s       cn68xx;
	struct cvmx_mio_ptp_timestamp_s       cn68xxp1;
	struct cvmx_mio_ptp_timestamp_s       cnf71xx;
};
typedef union cvmx_mio_ptp_timestamp cvmx_mio_ptp_timestamp_t;

/**
 * cvmx_mio_qlm#_cfg
 *
 * Notes:
 * Certain QLM_SPD is valid only for certain QLM_CFG configuration, refer to HRM for valid
 * combinations.  These csrs are reset only on COLD_RESET.  The Reset values for QLM_SPD and QLM_CFG
 * are as follows:               MIO_QLM0_CFG  SPD=F, CFG=2 SGMII (AGX0)
 *                               MIO_QLM1_CFG  SPD=0, CFG=1 PCIE 2x1 (PEM0/PEM1)
 */
union cvmx_mio_qlmx_cfg {
	uint64_t u64;
	struct cvmx_mio_qlmx_cfg_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_15_63               : 49;
	uint64_t prtmode                      : 1;  /**< Port Mode, value of MIO_RST_CNTLX.PRTMODE[0]
                                                         0 = port is EP mode
                                                         1 = port is RC mode */
	uint64_t reserved_12_13               : 2;
	uint64_t qlm_spd                      : 4;  /**< QLM0 speed for SGMii
                                                            0   = 5     Gbaud   100.00 MHz Ref
                                                            1   = 2.5   Gbaud   100.00 MHz Ref
                                                            2   = 2.5   Gbaud   100.00 MHz Ref
                                                            3   = 1.25  Gbaud   100.00 MHz Ref
                                                            4   = 1.25  Gbaud   156.25 MHz Ref
                                                            5   = 6.25  Gbaud   125.00 MHz Ref
                                                            6   = 5     Gbaud   125.00 MHz Ref
                                                            7   = 2.5   Gbaud   156.25 MHz Ref
                                                            8   = 3.125 Gbaud   125.00 MHz Ref
                                                            9   = 2.5   Gbaud   125.00 MHz Ref
                                                            10  = 1.25  Gbaud   125.00 MHz Ref
                                                            11  = 5     Gbaud   156.25 MHz Ref
                                                            12  = 6.25  Gbaud   156.25 MHz Ref
                                                            13  = 3.75  Gbaud   156.25 MHz Ref
                                                            14  = 3.125 Gbaud   156.25 MHz Ref
                                                            15  = QLM Disabled

                                                         QLM1 speed PEM0   PEM1
                                                            0   =  2.5/5  2.5/5 Gbaud  100.00 MHz Ref
                                                            1   =  2.5    2.5/5 Gbaud  100.00 MHz Ref
                                                            2   =  2.5/5  2.5   Gbaud  100.00 MHz Ref
                                                            3   =  2.5    2.5   Gbaud  100.00 MHz Ref
                                                            4   =  2.5/5  2.5/5 Gbaud  125.00 MHz Ref
                                                            6   =  2.5/5  2.5   Gbaud  125.00 MHz Ref
                                                            7   =  2.5    2.5   Gbaud  125.00 MHz Ref
                                                            9   =  2.5    2.5/5 Gbaud  125.00 MHz Ref
                                                            15  =  QLM Disabled
                                                            5,8,10-14 are reserved */
	uint64_t reserved_4_7                 : 4;
	uint64_t qlm_cfg                      : 4;  /**< QLM configuration mode
                                                         For Interface 0:
                                                            00 Reserved
                                                            01 Reserved
                                                            10 SGMII (AGX0)
                                                            11 Reserved
                                                         For Interface 1:
                                                            00 PCIE 1x2 (PEM1)
                                                            01 PCIE 2x1 (PEM0/PEM1)
                                                            1x Reserved */
#else
	uint64_t qlm_cfg                      : 4;
	uint64_t reserved_4_7                 : 4;
	uint64_t qlm_spd                      : 4;
	uint64_t reserved_12_13               : 2;
	uint64_t prtmode                      : 1;
	uint64_t reserved_15_63               : 49;
#endif
	} s;
	struct cvmx_mio_qlmx_cfg_cn61xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_15_63               : 49;
	uint64_t prtmode                      : 1;  /**< Port Mode, value of MIO_RST_CNTLX.PRTMODE[0]
                                                            0 = port is EP mode
                                                            1 = port is RC mode
                                                         For QLM2, HOST_MODE is always '0' because PCIe
                                                         is not supported. */
	uint64_t reserved_12_13               : 2;
	uint64_t qlm_spd                      : 4;  /**< QLM speed for SGMii/XAUI
                                                            0   = 5     Gbaud   100.00 MHz Ref
                                                            1   = 2.5   Gbaud   100.00 MHz Ref
                                                            2   = 2.5   Gbaud   100.00 MHz Ref
                                                            3   = 1.25  Gbaud   100.00 MHz Ref
                                                            4   = 1.25  Gbaud   156.25 MHz Ref
                                                            5   = 6.25  Gbaud   125.00 MHz Ref
                                                            6   = 5     Gbaud   125.00 MHz Ref
                                                            7   = 2.5   Gbaud   156.25 MHz Ref
                                                            8   = 3.125 Gbaud   125.00 MHz Ref
                                                            9   = 2.5   Gbaud   125.00 MHz Ref
                                                            10  = 1.25  Gbaud   125.00 MHz Ref
                                                            11  = 5     Gbaud   156.25 MHz Ref
                                                            12  = 6.25  Gbaud   156.25 MHz Ref
                                                            13  = 3.75  Gbaud   156.25 MHz Ref
                                                            14  = 3.125 Gbaud   156.25 MHz Ref
                                                            15  = QLM Disabled

                                                         QLM speed PEM0   PEM1
                                                            0   =  2.5/5  2.5/5 Gbaud  100.00 MHz Ref
                                                            1   =  2.5    2.5/5 Gbaud  100.00 MHz Ref
                                                            2   =  2.5/5  2.5   Gbaud  100.00 MHz Ref
                                                            3   =  2.5    2.5   Gbaud  100.00 MHz Ref
                                                            4   =  2.5/5  2.5/5 Gbaud  125.00 MHz Ref
                                                            6   =  2.5/5  2.5   Gbaud  125.00 MHz Ref
                                                            7   =  2.5    2.5   Gbaud  125.00 MHz Ref
                                                            9   =  2.5    2.5/5 Gbaud  125.00 MHz Ref
                                                            15  =  QLM Disabled
                                                            5,8,10-14 are reserved */
	uint64_t reserved_2_7                 : 6;
	uint64_t qlm_cfg                      : 2;  /**< QLM configuration mode
                                                         For Interface 0:
                                                            00 PCIE 1x4 (PEM0)
                                                            01 Reserved
                                                            10 SGMII (AGX1)
                                                            11 XAUI (AGX1)
                                                         For Interface 1:
                                                            00 PCIE 1x2 (PEM1)
                                                            01 PCIE 2x1 (PEM0/PEM1)
                                                            10 Reserved
                                                            11 Reserved
                                                         For Interface 2:
                                                            00 Reserved
                                                            01 Reserved
                                                            10 SGMII (AGX0)
                                                            11 XAUI (AGX0) */
#else
	uint64_t qlm_cfg                      : 2;
	uint64_t reserved_2_7                 : 6;
	uint64_t qlm_spd                      : 4;
	uint64_t reserved_12_13               : 2;
	uint64_t prtmode                      : 1;
	uint64_t reserved_15_63               : 49;
#endif
	} cn61xx;
	struct cvmx_mio_qlmx_cfg_cn66xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_12_63               : 52;
	uint64_t qlm_spd                      : 4;  /**< QLM speed
                                                         0   = 5     Gbaud
                                                         1   = 2.5   Gbaud
                                                         2   = 2.5   Gbaud
                                                         3   = 1.25  Gbaud
                                                         4   = 1.25  Gbaud
                                                         5   = 6.25  Gbaud
                                                         6   = 5     Gbaud
                                                         7   = 2.5   Gbaud
                                                         8   = 3.125 Gbaud
                                                         9   = 2.5   Gbaud
                                                         10  = 1.25  Gbaud
                                                         11  = 5     Gbaud
                                                         12  = 6.25  Gbaud
                                                         13  = 3.75  Gbaud
                                                         14  = 3.125 Gbaud
                                                         15  = QLM Disabled */
	uint64_t reserved_4_7                 : 4;
	uint64_t qlm_cfg                      : 4;  /**< QLM configuration mode
                                                            0000 PCIE gen2
                                                            0001 SRIO 1x4 short
                                                            0010 PCIE gen1 only
                                                            0011 SRIO 1x4 long
                                                            0100 SRIO 2x2 short
                                                            0101 SRIO 4x1 short
                                                            0110 SRIO 2x2 long
                                                            0111 SRIO 4x1 long
                                                            1000 PCIE gen2 (alias)
                                                            1001 SGMII
                                                            1010 PCIE gen1 only (alias)
                                                            1011 XAUI
                                                            1100 RESERVED
                                                            1101 RESERVED
                                                            1110 RESERVED
                                                            1111 RESERVED
                                                         NOTE: Internal encodings differ from QLM_MODE
                                                               pins encodings */
#else
	uint64_t qlm_cfg                      : 4;
	uint64_t reserved_4_7                 : 4;
	uint64_t qlm_spd                      : 4;
	uint64_t reserved_12_63               : 52;
#endif
	} cn66xx;
	struct cvmx_mio_qlmx_cfg_cn68xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_12_63               : 52;
	uint64_t qlm_spd                      : 4;  /**< QLM speed
                                                         0   = 5     Gbaud   100.00 MHz Ref
                                                         1   = 2.5   Gbaud   100.00 MHz Ref
                                                         2   = 2.5   Gbaud   100.00 MHz Ref
                                                         3   = 1.25  Gbaud   100.00 MHz Ref
                                                         4   = 1.25  Gbaud   156.25 MHz Ref
                                                         5   = 6.25  Gbaud   125.00 MHz Ref
                                                         6   = 5     Gbaud   125.00 MHz Ref
                                                         7   = 2.5   Gbaud   156.25 MHz Ref
                                                         8   = 3.125 Gbaud   125.00 MHz Ref
                                                         9   = 2.5   Gbaud   125.00 MHz Ref
                                                         10  = 1.25  Gbaud   125.00 MHz Ref
                                                         11  = 5     Gbaud   156.25 MHz Ref
                                                         12  = 6.25  Gbaud   156.25 MHz Ref
                                                         13  = 3.75  Gbaud   156.25 MHz Ref
                                                         14  = 3.125 Gbaud   156.25 MHz Ref
                                                         15  = QLM Disabled */
	uint64_t reserved_3_7                 : 5;
	uint64_t qlm_cfg                      : 3;  /**< QLM configuration mode
                                                            000 = PCIE
                                                            001 = ILK
                                                            010 = SGMII
                                                            011 = XAUI
                                                            100 = RESERVED
                                                            101 = RESERVED
                                                            110 = RESERVED
                                                            111 = RXAUI
                                                         NOTE: Internal encodings differ from QLM_MODE
                                                               pins encodings */
#else
	uint64_t qlm_cfg                      : 3;
	uint64_t reserved_3_7                 : 5;
	uint64_t qlm_spd                      : 4;
	uint64_t reserved_12_63               : 52;
#endif
	} cn68xx;
	struct cvmx_mio_qlmx_cfg_cn68xx       cn68xxp1;
	struct cvmx_mio_qlmx_cfg_cn61xx       cnf71xx;
};
typedef union cvmx_mio_qlmx_cfg cvmx_mio_qlmx_cfg_t;

/**
 * cvmx_mio_rst_boot
 *
 * Notes:
 * JTCSRDIS, EJTAGDIS, ROMEN reset to 1 in authentik mode; in all other modes they reset to 0.
 *
 */
union cvmx_mio_rst_boot {
	uint64_t u64;
	struct cvmx_mio_rst_boot_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t chipkill                     : 1;  /**< A 0->1 transition of CHIPKILL starts the CHIPKILL
                                                         timer.  When CHIPKILL=1 and the timer expires,
                                                         internal chip reset is asserted forever until the
                                                         next chip reset.  The CHIPKILL timer can be
                                                         stopped only by a chip (cold, warm, soft) reset.
                                                         The length of the CHIPKILL timer is specified by
                                                         MIO_RST_CKILL[TIMER]. */
	uint64_t jtcsrdis                     : 1;  /**< If JTCSRDIS=1, internal CSR access via JTAG TAP
                                                         controller is disabled */
	uint64_t ejtagdis                     : 1;  /**< If EJTAGDIS=1, external EJTAG access is disabled */
	uint64_t romen                        : 1;  /**< If ROMEN=1, Authentik/eMMC boot ROM is visible
                                                         in the boot bus address space. */
	uint64_t ckill_ppdis                  : 1;  /**< If CK_PPDIS=1, PPs other than 0 are disabled
                                                         during a CHIPKILL.  Writes have no effect when
                                                         MIO_RST_BOOT[CHIPKILL]=1. */
	uint64_t jt_tstmode                   : 1;  /**< JTAG test mode */
	uint64_t reserved_50_57               : 8;
	uint64_t lboot_ext                    : 2;  /**< Reserved */
	uint64_t reserved_44_47               : 4;
	uint64_t qlm4_spd                     : 4;  /**< QLM4_SPD pins sampled at DCOK assertion */
	uint64_t qlm3_spd                     : 4;  /**< QLM3_SPD pins sampled at DCOK assertion */
	uint64_t c_mul                        : 6;  /**< Core clock multiplier:
                                                           C_MUL = (core clk speed) / (ref clock speed)
                                                         "ref clock speed" should always be 50MHz.
                                                         If PLL_QLM_REF_CLK_EN=0, "ref clock" comes
                                                              from PLL_REF_CLK pin.
                                                         If PLL_QLM_REF_CLK_EN=1, "ref clock" is
                                                              1/2 speed of QLMC_REF_CLK_* pins. */
	uint64_t pnr_mul                      : 6;  /**< Coprocessor clock multiplier:
                                                           PNR_MUL = (coprocessor clk speed) /
                                                                           (ref clock speed)
                                                         See C_MUL comments about ref clock. */
	uint64_t qlm2_spd                     : 4;  /**< QLM2_SPD, report MIO_QLM2_CFG[SPD] */
	uint64_t qlm1_spd                     : 4;  /**< QLM1_SPD, report MIO_QLM1_CFG[SPD] */
	uint64_t qlm0_spd                     : 4;  /**< QLM0_SPD, report MIO_QLM0_CFG[SPD] */
	uint64_t lboot                        : 10; /**< Last boot cause mask, resets only with dcok.

                                                         bit9 - Soft reset due to watchdog
                                                         bit8 - Soft reset due to CIU_SOFT_RST write
                                                         bit7 - Warm reset due to cntl0 link-down or
                                                                hot-reset
                                                         bit6 - Warm reset due to cntl1 link-down or
                                                                hot-reset
                                                         bit5 - Cntl1 reset due to PERST1_L pin
                                                         bit4 - Cntl0 reset due to PERST0_L pin
                                                         bit3 - Warm reset due to PERST1_L pin
                                                         bit2 - Warm reset due to PERST0_L pin
                                                         bit1 - Warm reset due to CHIP_RESET_L pin
                                                         bit0 - Cold reset due to DCOK pin */
	uint64_t rboot                        : 1;  /**< Determines whether core 0 remains in reset after
                                                         after chip cold/warm/soft reset. */
	uint64_t rboot_pin                    : 1;  /**< Read-only access to REMOTE_BOOT pin */
#else
	uint64_t rboot_pin                    : 1;
	uint64_t rboot                        : 1;
	uint64_t lboot                        : 10;
	uint64_t qlm0_spd                     : 4;
	uint64_t qlm1_spd                     : 4;
	uint64_t qlm2_spd                     : 4;
	uint64_t pnr_mul                      : 6;
	uint64_t c_mul                        : 6;
	uint64_t qlm3_spd                     : 4;
	uint64_t qlm4_spd                     : 4;
	uint64_t reserved_44_47               : 4;
	uint64_t lboot_ext                    : 2;
	uint64_t reserved_50_57               : 8;
	uint64_t jt_tstmode                   : 1;
	uint64_t ckill_ppdis                  : 1;
	uint64_t romen                        : 1;
	uint64_t ejtagdis                     : 1;
	uint64_t jtcsrdis                     : 1;
	uint64_t chipkill                     : 1;
#endif
	} s;
	struct cvmx_mio_rst_boot_cn61xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t chipkill                     : 1;  /**< A 0->1 transition of CHIPKILL starts the CHIPKILL
                                                         timer.  When CHIPKILL=1 and the timer expires,
                                                         internal chip reset is asserted forever until the
                                                         next chip reset.  The CHIPKILL timer can be
                                                         stopped only by a chip (cold, warm, soft) reset.
                                                         The length of the CHIPKILL timer is specified by
                                                         MIO_RST_CKILL[TIMER]. */
	uint64_t jtcsrdis                     : 1;  /**< If JTCSRDIS=1, internal CSR access via JTAG TAP
                                                         controller is disabled */
	uint64_t ejtagdis                     : 1;  /**< If EJTAGDIS=1, external EJTAG access is disabled */
	uint64_t romen                        : 1;  /**< If ROMEN=1, Authentik/eMMC boot ROM is visible
                                                         in the boot bus address space. */
	uint64_t ckill_ppdis                  : 1;  /**< If CK_PPDIS=1, PPs other than 0 are disabled
                                                         during a CHIPKILL.  Writes have no effect when
                                                         MIO_RST_BOOT[CHIPKILL]=1. */
	uint64_t jt_tstmode                   : 1;  /**< JTAG test mode */
	uint64_t reserved_50_57               : 8;
	uint64_t lboot_ext                    : 2;  /**< Reserved */
	uint64_t reserved_36_47               : 12;
	uint64_t c_mul                        : 6;  /**< Core clock multiplier:
                                                           C_MUL = (core clk speed) / (ref clock speed)
                                                         "ref clock speed" should always be 50MHz.
                                                         If PLL_QLM_REF_CLK_EN=0, "ref clock" comes
                                                              from PLL_REF_CLK pin.
                                                         If PLL_QLM_REF_CLK_EN=1, "ref clock" is
                                                              1/2 speed of QLMC_REF_CLK_* pins. */
	uint64_t pnr_mul                      : 6;  /**< Coprocessor clock multiplier:
                                                           PNR_MUL = (coprocessor clk speed) /
                                                                           (ref clock speed)
                                                         See C_MUL comments about ref clock. */
	uint64_t qlm2_spd                     : 4;  /**< QLM2_SPD, report MIO_QLM2_CFG[SPD] */
	uint64_t qlm1_spd                     : 4;  /**< QLM1_SPD, report MIO_QLM1_CFG[SPD] */
	uint64_t qlm0_spd                     : 4;  /**< QLM0_SPD, report MIO_QLM0_CFG[SPD] */
	uint64_t lboot                        : 10; /**< Last boot cause mask, resets only with dcok.

                                                         bit9 - Soft reset due to watchdog
                                                         bit8 - Soft reset due to CIU_SOFT_RST write
                                                         bit7 - Warm reset due to cntl0 link-down or
                                                                hot-reset
                                                         bit6 - Warm reset due to cntl1 link-down or
                                                                hot-reset
                                                         bit5 - Cntl1 reset due to PERST1_L pin
                                                         bit4 - Cntl0 reset due to PERST0_L pin
                                                         bit3 - Warm reset due to PERST1_L pin
                                                         bit2 - Warm reset due to PERST0_L pin
                                                         bit1 - Warm reset due to CHIP_RESET_L pin
                                                         bit0 - Cold reset due to DCOK pin */
	uint64_t rboot                        : 1;  /**< Determines whether core 0 remains in reset after
                                                         after chip cold/warm/soft reset. */
	uint64_t rboot_pin                    : 1;  /**< Read-only access to REMOTE_BOOT pin */
#else
	uint64_t rboot_pin                    : 1;
	uint64_t rboot                        : 1;
	uint64_t lboot                        : 10;
	uint64_t qlm0_spd                     : 4;
	uint64_t qlm1_spd                     : 4;
	uint64_t qlm2_spd                     : 4;
	uint64_t pnr_mul                      : 6;
	uint64_t c_mul                        : 6;
	uint64_t reserved_36_47               : 12;
	uint64_t lboot_ext                    : 2;
	uint64_t reserved_50_57               : 8;
	uint64_t jt_tstmode                   : 1;
	uint64_t ckill_ppdis                  : 1;
	uint64_t romen                        : 1;
	uint64_t ejtagdis                     : 1;
	uint64_t jtcsrdis                     : 1;
	uint64_t chipkill                     : 1;
#endif
	} cn61xx;
	struct cvmx_mio_rst_boot_cn63xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_36_63               : 28;
	uint64_t c_mul                        : 6;  /**< Core clock multiplier:
                                                           C_MUL = (core clk speed) / (ref clock speed)
                                                         "ref clock speed" should always be 50MHz.
                                                         If PLL_QLM_REF_CLK_EN=0, "ref clock" comes
                                                              from PLL_REF_CLK pin.
                                                         If PLL_QLM_REF_CLK_EN=1, "ref clock" is
                                                              1/2 speed of QLMC_REF_CLK_* pins. */
	uint64_t pnr_mul                      : 6;  /**< Coprocessor clock multiplier:
                                                           PNR_MUL = (coprocessor clk speed) /
                                                                           (ref clock speed)
                                                         See C_MUL comments about ref clock. */
	uint64_t qlm2_spd                     : 4;  /**< QLM2_SPD pins sampled at DCOK assertion */
	uint64_t qlm1_spd                     : 4;  /**< QLM1_SPD pins sampled at DCOK assertion */
	uint64_t qlm0_spd                     : 4;  /**< QLM0_SPD pins sampled at DCOK assertion */
	uint64_t lboot                        : 10; /**< Last boot cause mask, resets only with dock.

                                                         bit9 - Soft reset due to watchdog
                                                         bit8 - Soft reset due to CIU_SOFT_RST write
                                                         bit7 - Warm reset due to cntl0 link-down or
                                                                hot-reset
                                                         bit6 - Warm reset due to cntl1 link-down or
                                                                hot-reset
                                                         bit5 - Cntl1 reset due to PERST1_L pin
                                                         bit4 - Cntl0 reset due to PERST0_L pin
                                                         bit3 - Warm reset due to PERST1_L pin
                                                         bit2 - Warm reset due to PERST0_L pin
                                                         bit1 - Warm reset due to CHIP_RESET_L pin
                                                         bit0 - Cold reset due to DCOK pin */
	uint64_t rboot                        : 1;  /**< Determines whether core 0 remains in reset after
                                                         after chip cold/warm/soft reset. */
	uint64_t rboot_pin                    : 1;  /**< Read-only access to REMOTE_BOOT pin */
#else
	uint64_t rboot_pin                    : 1;
	uint64_t rboot                        : 1;
	uint64_t lboot                        : 10;
	uint64_t qlm0_spd                     : 4;
	uint64_t qlm1_spd                     : 4;
	uint64_t qlm2_spd                     : 4;
	uint64_t pnr_mul                      : 6;
	uint64_t c_mul                        : 6;
	uint64_t reserved_36_63               : 28;
#endif
	} cn63xx;
	struct cvmx_mio_rst_boot_cn63xx       cn63xxp1;
	struct cvmx_mio_rst_boot_cn66xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t chipkill                     : 1;  /**< A 0->1 transition of CHIPKILL starts the CHIPKILL
                                                         timer.  When CHIPKILL=1 and the timer expires,
                                                         internal chip reset is asserted forever until the
                                                         next chip reset.  The CHIPKILL timer can be
                                                         stopped only by a chip (cold, warm, soft) reset.
                                                         The length of the CHIPKILL timer is specified by
                                                         MIO_RST_CKILL[TIMER]. */
	uint64_t jtcsrdis                     : 1;  /**< If JTCSRDIS=1, internal CSR access via JTAG TAP
                                                         controller is disabled */
	uint64_t ejtagdis                     : 1;  /**< If EJTAGDIS=1, external EJTAG access is disabled */
	uint64_t romen                        : 1;  /**< If ROMEN=1, Authentik ROM is visible in the boot
                                                         bus address space. */
	uint64_t ckill_ppdis                  : 1;  /**< If CK_PPDIS=1, PPs other than 0 are disabled
                                                         during a CHIPKILL.  Writes have no effect when
                                                         MIO_RST_BOOT[CHIPKILL]=1. */
	uint64_t reserved_50_58               : 9;
	uint64_t lboot_ext                    : 2;  /**< Extended Last boot cause mask, resets only with
                                                         dock.

                                                           bit1 - Warm reset due to cntl3 link-down or
                                                                  hot-reset
                                                           bit0 - Warm reset due to cntl2 link-down or
                                                                  hot-reset */
	uint64_t reserved_36_47               : 12;
	uint64_t c_mul                        : 6;  /**< Core clock multiplier:
                                                           C_MUL = (core clk speed) / (ref clock speed)
                                                         "ref clock speed" should always be 50MHz.
                                                         If PLL_QLM_REF_CLK_EN=0, "ref clock" comes
                                                              from PLL_REF_CLK pin.
                                                         If PLL_QLM_REF_CLK_EN=1, "ref clock" is
                                                              1/2 speed of QLMC_REF_CLK_* pins. */
	uint64_t pnr_mul                      : 6;  /**< Coprocessor clock multiplier:
                                                           PNR_MUL = (coprocessor clk speed) /
                                                                           (ref clock speed)
                                                         See C_MUL comments about ref clock. */
	uint64_t qlm2_spd                     : 4;  /**< QLM2_SPD pins sampled at DCOK assertion */
	uint64_t qlm1_spd                     : 4;  /**< QLM1_SPD pins sampled at DCOK assertion */
	uint64_t qlm0_spd                     : 4;  /**< QLM0_SPD pins sampled at DCOK assertion */
	uint64_t lboot                        : 10; /**< Last boot cause mask, resets only with dock.

                                                         bit9 - Soft reset due to watchdog
                                                         bit8 - Soft reset due to CIU_SOFT_RST write
                                                         bit7 - Warm reset due to cntl0 link-down or
                                                                hot-reset
                                                         bit6 - Warm reset due to cntl1 link-down or
                                                                hot-reset
                                                         bit5 - Cntl1 reset due to PERST1_L pin
                                                         bit4 - Cntl0 reset due to PERST0_L pin
                                                         bit3 - Warm reset due to PERST1_L pin
                                                         bit2 - Warm reset due to PERST0_L pin
                                                         bit1 - Warm reset due to CHIP_RESET_L pin
                                                         bit0 - Cold reset due to DCOK pin */
	uint64_t rboot                        : 1;  /**< Determines whether core 0 remains in reset after
                                                         after chip cold/warm/soft reset. */
	uint64_t rboot_pin                    : 1;  /**< Read-only access to REMOTE_BOOT pin */
#else
	uint64_t rboot_pin                    : 1;
	uint64_t rboot                        : 1;
	uint64_t lboot                        : 10;
	uint64_t qlm0_spd                     : 4;
	uint64_t qlm1_spd                     : 4;
	uint64_t qlm2_spd                     : 4;
	uint64_t pnr_mul                      : 6;
	uint64_t c_mul                        : 6;
	uint64_t reserved_36_47               : 12;
	uint64_t lboot_ext                    : 2;
	uint64_t reserved_50_58               : 9;
	uint64_t ckill_ppdis                  : 1;
	uint64_t romen                        : 1;
	uint64_t ejtagdis                     : 1;
	uint64_t jtcsrdis                     : 1;
	uint64_t chipkill                     : 1;
#endif
	} cn66xx;
	struct cvmx_mio_rst_boot_cn68xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_59_63               : 5;
	uint64_t jt_tstmode                   : 1;  /**< JTAG test mode */
	uint64_t reserved_44_57               : 14;
	uint64_t qlm4_spd                     : 4;  /**< QLM4_SPD pins sampled at DCOK assertion */
	uint64_t qlm3_spd                     : 4;  /**< QLM3_SPD pins sampled at DCOK assertion */
	uint64_t c_mul                        : 6;  /**< Core clock multiplier:
                                                           C_MUL = (core clk speed) / (ref clock speed)
                                                         "ref clock" is PLL_REF_CLK pin, which should
                                                         always be 50 MHz. */
	uint64_t pnr_mul                      : 6;  /**< Coprocessor clock multiplier:
                                                           PNR_MUL = (coprocessor clk speed)
                                                                         (ref clock speed)
                                                         See C_MUL comments about ref clock. */
	uint64_t qlm2_spd                     : 4;  /**< QLM2_SPD pins sampled at DCOK assertion */
	uint64_t qlm1_spd                     : 4;  /**< QLM1_SPD pins sampled at DCOK assertion */
	uint64_t qlm0_spd                     : 4;  /**< QLM0_SPD pins sampled at DCOK assertion */
	uint64_t lboot                        : 10; /**< Last boot cause mask, resets only with dock.

                                                         bit9 - Soft reset due to watchdog
                                                         bit8 - Soft reset due to CIU_SOFT_RST write
                                                         bit7 - Warm reset due to cntl0 link-down or
                                                                hot-reset
                                                         bit6 - Warm reset due to cntl1 link-down or
                                                                hot-reset
                                                         bit5 - Cntl1 reset due to PERST1_L pin
                                                         bit4 - Cntl0 reset due to PERST0_L pin
                                                         bit3 - Warm reset due to PERST1_L pin
                                                         bit2 - Warm reset due to PERST0_L pin
                                                         bit1 - Warm reset due to CHIP_RESET_L pin
                                                         bit0 - Cold reset due to DCOK pin */
	uint64_t rboot                        : 1;  /**< Determines whether core 0 remains in reset after
                                                         after chip cold/warm/soft reset. */
	uint64_t rboot_pin                    : 1;  /**< Read-only access to REMOTE_BOOT pin */
#else
	uint64_t rboot_pin                    : 1;
	uint64_t rboot                        : 1;
	uint64_t lboot                        : 10;
	uint64_t qlm0_spd                     : 4;
	uint64_t qlm1_spd                     : 4;
	uint64_t qlm2_spd                     : 4;
	uint64_t pnr_mul                      : 6;
	uint64_t c_mul                        : 6;
	uint64_t qlm3_spd                     : 4;
	uint64_t qlm4_spd                     : 4;
	uint64_t reserved_44_57               : 14;
	uint64_t jt_tstmode                   : 1;
	uint64_t reserved_59_63               : 5;
#endif
	} cn68xx;
	struct cvmx_mio_rst_boot_cn68xxp1 {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_44_63               : 20;
	uint64_t qlm4_spd                     : 4;  /**< QLM4_SPD pins sampled at DCOK assertion */
	uint64_t qlm3_spd                     : 4;  /**< QLM3_SPD pins sampled at DCOK assertion */
	uint64_t c_mul                        : 6;  /**< Core clock multiplier:
                                                           C_MUL = (core clk speed) / (ref clock speed)
                                                         "ref clock" is PLL_REF_CLK pin, which should
                                                         always be 50 MHz. */
	uint64_t pnr_mul                      : 6;  /**< Coprocessor clock multiplier:
                                                           PNR_MUL = (coprocessor clk speed)
                                                                         (ref clock speed)
                                                         See C_MUL comments about ref clock. */
	uint64_t qlm2_spd                     : 4;  /**< QLM2_SPD pins sampled at DCOK assertion */
	uint64_t qlm1_spd                     : 4;  /**< QLM1_SPD pins sampled at DCOK assertion */
	uint64_t qlm0_spd                     : 4;  /**< QLM0_SPD pins sampled at DCOK assertion */
	uint64_t lboot                        : 10; /**< Last boot cause mask, resets only with dock.

                                                         bit9 - Soft reset due to watchdog
                                                         bit8 - Soft reset due to CIU_SOFT_RST write
                                                         bit7 - Warm reset due to cntl0 link-down or
                                                                hot-reset
                                                         bit6 - Warm reset due to cntl1 link-down or
                                                                hot-reset
                                                         bit5 - Cntl1 reset due to PERST1_L pin
                                                         bit4 - Cntl0 reset due to PERST0_L pin
                                                         bit3 - Warm reset due to PERST1_L pin
                                                         bit2 - Warm reset due to PERST0_L pin
                                                         bit1 - Warm reset due to CHIP_RESET_L pin
                                                         bit0 - Cold reset due to DCOK pin */
	uint64_t rboot                        : 1;  /**< Determines whether core 0 remains in reset after
                                                         after chip cold/warm/soft reset. */
	uint64_t rboot_pin                    : 1;  /**< Read-only access to REMOTE_BOOT pin */
#else
	uint64_t rboot_pin                    : 1;
	uint64_t rboot                        : 1;
	uint64_t lboot                        : 10;
	uint64_t qlm0_spd                     : 4;
	uint64_t qlm1_spd                     : 4;
	uint64_t qlm2_spd                     : 4;
	uint64_t pnr_mul                      : 6;
	uint64_t c_mul                        : 6;
	uint64_t qlm3_spd                     : 4;
	uint64_t qlm4_spd                     : 4;
	uint64_t reserved_44_63               : 20;
#endif
	} cn68xxp1;
	struct cvmx_mio_rst_boot_cn61xx       cnf71xx;
};
typedef union cvmx_mio_rst_boot cvmx_mio_rst_boot_t;

/**
 * cvmx_mio_rst_cfg
 *
 * Notes:
 * Cold reset will always performs a full bist.
 *
 */
union cvmx_mio_rst_cfg {
	uint64_t u64;
	struct cvmx_mio_rst_cfg_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_3_63                : 61;
	uint64_t cntl_clr_bist                : 1;  /**< Peform clear bist during cntl only reset,
                                                         instead of a full bist. A warm/soft reset will
                                                         not change this field. */
	uint64_t warm_clr_bist                : 1;  /**< Peform clear bist during warm reset, instead
                                                         of a full bist. A warm/soft reset will not
                                                         change this field. */
	uint64_t soft_clr_bist                : 1;  /**< Peform clear bist during soft reset, instead
                                                         of a full bist. A warm/soft reset will not
                                                         change this field. */
#else
	uint64_t soft_clr_bist                : 1;
	uint64_t warm_clr_bist                : 1;
	uint64_t cntl_clr_bist                : 1;
	uint64_t reserved_3_63                : 61;
#endif
	} s;
	struct cvmx_mio_rst_cfg_cn61xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t bist_delay                   : 58; /**< Reserved */
	uint64_t reserved_3_5                 : 3;
	uint64_t cntl_clr_bist                : 1;  /**< Peform clear bist during cntl only reset,
                                                         instead of a full bist. A warm/soft reset will
                                                         not change this field. */
	uint64_t warm_clr_bist                : 1;  /**< Peform clear bist during warm reset, instead
                                                         of a full bist. A warm/soft reset will not
                                                         change this field. */
	uint64_t soft_clr_bist                : 1;  /**< Peform clear bist during soft reset, instead
                                                         of a full bist. A warm/soft reset will not
                                                         change this field. */
#else
	uint64_t soft_clr_bist                : 1;
	uint64_t warm_clr_bist                : 1;
	uint64_t cntl_clr_bist                : 1;
	uint64_t reserved_3_5                 : 3;
	uint64_t bist_delay                   : 58;
#endif
	} cn61xx;
	struct cvmx_mio_rst_cfg_cn61xx        cn63xx;
	struct cvmx_mio_rst_cfg_cn63xxp1 {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t bist_delay                   : 58; /**< Reserved */
	uint64_t reserved_2_5                 : 4;
	uint64_t warm_clr_bist                : 1;  /**< Peform clear bist during warm reset, instead
                                                         of a full bist. A warm/soft reset will not
                                                         change this field. */
	uint64_t soft_clr_bist                : 1;  /**< Peform clear bist during soft reset, instead
                                                         of a full bist. A warm/soft reset will not
                                                         change this field. */
#else
	uint64_t soft_clr_bist                : 1;
	uint64_t warm_clr_bist                : 1;
	uint64_t reserved_2_5                 : 4;
	uint64_t bist_delay                   : 58;
#endif
	} cn63xxp1;
	struct cvmx_mio_rst_cfg_cn61xx        cn66xx;
	struct cvmx_mio_rst_cfg_cn68xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t bist_delay                   : 56; /**< Reserved */
	uint64_t reserved_3_7                 : 5;
	uint64_t cntl_clr_bist                : 1;  /**< Peform clear bist during cntl only reset,
                                                         instead of a full bist. A warm/soft reset will
                                                         not change this field. */
	uint64_t warm_clr_bist                : 1;  /**< Peform clear bist during warm reset, instead
                                                         of a full bist. A warm/soft reset will not
                                                         change this field. */
	uint64_t soft_clr_bist                : 1;  /**< Peform clear bist during soft reset, instead
                                                         of a full bist. A warm/soft reset will not
                                                         change this field. */
#else
	uint64_t soft_clr_bist                : 1;
	uint64_t warm_clr_bist                : 1;
	uint64_t cntl_clr_bist                : 1;
	uint64_t reserved_3_7                 : 5;
	uint64_t bist_delay                   : 56;
#endif
	} cn68xx;
	struct cvmx_mio_rst_cfg_cn68xx        cn68xxp1;
	struct cvmx_mio_rst_cfg_cn61xx        cnf71xx;
};
typedef union cvmx_mio_rst_cfg cvmx_mio_rst_cfg_t;

/**
 * cvmx_mio_rst_ckill
 *
 * MIO_RST_CKILL = MIO Chipkill Timer Register
 *
 */
union cvmx_mio_rst_ckill {
	uint64_t u64;
	struct cvmx_mio_rst_ckill_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_47_63               : 17;
	uint64_t timer                        : 47; /**< CHIPKILL timer measured in SCLKs.  Reads return
                                                         the current CHIPKILL timer.   Writes have no
                                                         effect when MIO_RST_BOOT[CHIPKILL]=1. */
#else
	uint64_t timer                        : 47;
	uint64_t reserved_47_63               : 17;
#endif
	} s;
	struct cvmx_mio_rst_ckill_s           cn61xx;
	struct cvmx_mio_rst_ckill_s           cn66xx;
	struct cvmx_mio_rst_ckill_s           cnf71xx;
};
typedef union cvmx_mio_rst_ckill cvmx_mio_rst_ckill_t;

/**
 * cvmx_mio_rst_cntl#
 *
 * Notes:
 * GEN1_Only mode is enabled for PEM0 when QLM1_SPD[0] is set or when sclk < 550Mhz.
 * GEN1_Only mode is enabled for PEM1 when QLM1_SPD[1] is set or when sclk < 550Mhz.
 */
union cvmx_mio_rst_cntlx {
	uint64_t u64;
	struct cvmx_mio_rst_cntlx_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_13_63               : 51;
	uint64_t in_rev_ln                    : 1;  /**< RO access to corresponding pin PCIE*_REV_LANES
                                                         which is used for initial value for REV_LANES
                                                         For INT0/CNTL0: pin PCIE0_REV_LANES
                                                         For INT1/CNTL1: always zero as no PCIE1 pin */
	uint64_t rev_lanes                    : 1;  /**< Reverse the lanes for INT*.
                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized to
                                                         IN_REVLANE value.
                                                         When QLM1_CFG=1, INT0(PEM0) REV_LANES internal
                                                         setting will be always forced to '0', INT1(PEM1)
                                                         will be forced to '1' regardless CSR value. */
	uint64_t gen1_only                    : 1;  /**< Disable PCIE GEN2 Capability.  This bit is
                                                         always unpredictable whenever the controller
                                                         is not attached to any SerDes lanes, and is
                                                         otherwise always set when SCLK is slower than
                                                         550Mhz.
                                                         The MIO_RST_CNTL*[GEN1_ONLY] value is based on
                                                         the MIO_QLM1_CFG[QLM_SPD] value. */
	uint64_t prst_link                    : 1;  /**< Controls whether corresponding controller
                                                         link-down or hot-reset causes the assertion of
                                                         CIU_SOFT_PRST*[SOFT_PRST]

                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized to 0 */
	uint64_t rst_done                     : 1;  /**< Read-only access to controller reset status

                                                         RESET_DONE is always zero (i.e. the controller
                                                         is held in reset) when:
                                                           - CIU_SOFT_PRST*[SOFT_PRST]=1, or
                                                           - RST_RCV==1 and PERST*_L pin is asserted */
	uint64_t rst_link                     : 1;  /**< Controls whether corresponding controller
                                                         link-down or hot-reset causes a warm chip reset
                                                         On cold reset, this field is initialized as
                                                         follows:
                                                            0 = when corresponding HOST_MODE=1
                                                            1 = when corresponding HOST_MODE=0

                                                         Note that a link-down or hot-reset event can
                                                         never cause a warm chip reset when the
                                                         controller is in reset (i.e. can never cause a
                                                         warm reset when RST_DONE==0). */
	uint64_t host_mode                    : 1;  /**< RO access to corresponding strap PCIE*_HOST_MODE
                                                         For CNTL1/INT1, HOST_MODE is always '1' because
                                                         there is no PCIE1_HOST_MODE pin. */
	uint64_t prtmode                      : 2;  /**< Port mode
                                                            0 = port is EP mode
                                                            1 = port is RC mode
                                                            2,3 = Reserved
                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized as
                                                         HOST_MODE (corresponding strap PCIE*_HOST_MODE) */
	uint64_t rst_drv                      : 1;  /**< Controls whether corresponding PERST*_L chip pin
                                                         is driven by the OCTEON.  A warm/soft reset
                                                         will not change this field.  On cold reset,
                                                         this field is initialized as follows:
                                                          0 = when corresponding HOST_MODE=0
                                                          1 = when corresponding HOST_MODE=1

                                                         When set, OCTEON drives the corresponding
                                                         PERST*_L pin. Otherwise, OCTEON does not drive
                                                         the corresponding PERST*_L pin. */
	uint64_t rst_rcv                      : 1;  /**< Controls whether corresponding PERST*_L chip pin
                                                         is recieved by OCTEON.  A warm/soft reset
                                                         will not change this field.  On cold reset,
                                                         this field is initialized as follows:
                                                          0 = when corresponding HOST_MODE=1
                                                          1 = when corresponding HOST_MODE=0

                                                         When RST_RCV==1, the PERST*_L value is
                                                         received and may be used to reset the
                                                         controller and (optionally, based on RST_CHIP)
                                                         warm reset the chip.

                                                         When RST_RCV==1 (and RST_CHIP=0),
                                                         MIO_RST_INT[PERST*] gets set when the PERST*_L
                                                         pin asserts. (This interrupt can alert SW
                                                         whenever the external reset pin initiates a
                                                         controller reset sequence.)

                                                         RST_VAL gives the PERST*_L pin value when
                                                         RST_RCV==1.

                                                         When RST_RCV==0, the PERST*_L pin value is
                                                         ignored. */
	uint64_t rst_chip                     : 1;  /**< Controls whether corresponding PERST*_L chip
                                                         pin causes a chip warm reset like CHIP_RESET_L.
                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized to 0.

                                                         RST_CHIP is not used when RST_RCV==0.

                                                         When RST_RCV==0, RST_CHIP is ignored.

                                                         When RST_RCV==1, RST_CHIP==1, and PERST*_L
                                                         asserts, a chip warm reset will be generated. */
	uint64_t rst_val                      : 1;  /**< Read-only access to corresponding PERST*_L pin
                                                         Unpredictable when RST_RCV==0. Reads as 1 when
                                                         RST_RCV==1 and the PERST*_L pin is asserted.
                                                         Reads as 0 when RST_RCV==1 and the PERST*_L
                                                         pin is not asserted. */
#else
	uint64_t rst_val                      : 1;
	uint64_t rst_chip                     : 1;
	uint64_t rst_rcv                      : 1;
	uint64_t rst_drv                      : 1;
	uint64_t prtmode                      : 2;
	uint64_t host_mode                    : 1;
	uint64_t rst_link                     : 1;
	uint64_t rst_done                     : 1;
	uint64_t prst_link                    : 1;
	uint64_t gen1_only                    : 1;
	uint64_t rev_lanes                    : 1;
	uint64_t in_rev_ln                    : 1;
	uint64_t reserved_13_63               : 51;
#endif
	} s;
	struct cvmx_mio_rst_cntlx_s           cn61xx;
	struct cvmx_mio_rst_cntlx_cn66xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_10_63               : 54;
	uint64_t prst_link                    : 1;  /**< Controls whether corresponding controller
                                                         link-down or hot-reset causes the assertion of
                                                         CIU_SOFT_PRST*[SOFT_PRST]

                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized to 0 */
	uint64_t rst_done                     : 1;  /**< Read-only access to controller reset status

                                                         RESET_DONE is always zero (i.e. the controller
                                                         is held in reset) when:
                                                           - CIU_SOFT_PRST*[SOFT_PRST]=1, or
                                                           - RST_RCV==1 and PERST*_L pin is asserted */
	uint64_t rst_link                     : 1;  /**< Controls whether corresponding controller
                                                         link-down or hot-reset causes a warm chip reset
                                                         On cold reset, this field is initialized as
                                                         follows:
                                                            0 = when corresponding strap QLM*_HOST_MODE=1
                                                            1 = when corresponding strap QLM*_HOST_MODE=0

                                                         For MIO_RST_CNTL2 and MIO_RST_CNTL3, this field
                                                         is initialized to 1 on cold reset.

                                                         Note that a link-down or hot-reset event can
                                                         never cause a warm chip reset when the
                                                         controller is in reset (i.e. can never cause a
                                                         warm reset when RST_DONE==0). */
	uint64_t host_mode                    : 1;  /**< RO access to corresponding strap QLM*_HOST_MODE

                                                         For MIO_RST_CNTL2 and MIO_RST_CNTL3, this field
                                                         is reserved/RAZ.

                                                         QLM0_HOST_MODE corresponds to PCIe0/sRIO0
                                                         QLM1_HOST_MODE corresponds to PCIe1/sRIO1 */
	uint64_t prtmode                      : 2;  /**< Port mode
                                                            0 = port is EP mode
                                                            1 = port is RC mode
                                                            2,3 = Reserved
                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized as
                                                         follows:
                                                            0 = when corresponding strap QLM*_HOST_MODE=0
                                                            1 = when corresponding strap QLM*_HOST_MODE=1

                                                         For MIO_RST_CNTL2 and MIO_RST_CNTL3, this field
                                                         is initialized to 0 on cold reset. */
	uint64_t rst_drv                      : 1;  /**< Controls whether corresponding PERST*_L chip pin
                                                           is driven by the OCTEON.  A warm/soft reset
                                                           will not change this field.  On cold reset,
                                                           this field is initialized as follows:
                                                            0 = when corresponding strap QLM*_HOST_MODE=0
                                                            1 = when corresponding strap QLM*_HOST_MODE=1

                                                           When set, OCTEON drives the corresponding
                                                           PERST*_L pin. Otherwise, OCTEON does not drive
                                                           the corresponding PERST*_L pin.

                                                         For MIO_RST_CNTL2 and MIO_RST_CNTL3, this field
                                                         is reserved/RAZ. */
	uint64_t rst_rcv                      : 1;  /**< Controls whether corresponding PERST*_L chip pin
                                                           is recieved by OCTEON.  A warm/soft reset
                                                           will not change this field.  On cold reset,
                                                           this field is initialized as follows:
                                                            0 = when corresponding strap QLM*_HOST_MODE=1
                                                            1 = when corresponding strap QLM*_HOST_MODE=0

                                                           When RST_RCV==1, the PERST*_L value is
                                                           received and may be used to reset the
                                                           controller and (optionally, based on RST_CHIP)
                                                           warm reset the chip.

                                                           When RST_RCV==1 (and RST_CHIP=0),
                                                           MIO_RST_INT[PERST*] gets set when the PERST*_L
                                                           pin asserts. (This interrupt can alert SW
                                                           whenever the external reset pin initiates a
                                                           controller reset sequence.)

                                                           RST_VAL gives the PERST*_L pin value when
                                                           RST_RCV==1.

                                                           When RST_RCV==0, the PERST*_L pin value is
                                                           ignored.

                                                         For MIO_RST_CNTL2 and MIO_RST_CNTL3, this field
                                                         is reserved/RAZ. */
	uint64_t rst_chip                     : 1;  /**< Controls whether corresponding PERST*_L chip
                                                           pin causes a chip warm reset like CHIP_RESET_L.
                                                           A warm/soft reset will not change this field.
                                                           On cold reset, this field is initialized to 0.

                                                           RST_CHIP is not used when RST_RCV==0.

                                                           When RST_RCV==0, RST_CHIP is ignored.

                                                           When RST_RCV==1, RST_CHIP==1, and PERST*_L
                                                           asserts, a chip warm reset will be generated.

                                                         For MIO_RST_CNTL2 and MIO_RST_CNTL3, this field
                                                         is reserved/RAZ. */
	uint64_t rst_val                      : 1;  /**< Read-only access to corresponding PERST*_L pin
                                                           Unpredictable when RST_RCV==0. Reads as 1 when
                                                           RST_RCV==1 and the PERST*_L pin is asserted.
                                                           Reads as 0 when RST_RCV==1 and the PERST*_L
                                                           pin is not asserted.

                                                         For MIO_RST_CNTL2 and MIO_RST_CNTL3, this field
                                                         is reserved/RAZ. */
#else
	uint64_t rst_val                      : 1;
	uint64_t rst_chip                     : 1;
	uint64_t rst_rcv                      : 1;
	uint64_t rst_drv                      : 1;
	uint64_t prtmode                      : 2;
	uint64_t host_mode                    : 1;
	uint64_t rst_link                     : 1;
	uint64_t rst_done                     : 1;
	uint64_t prst_link                    : 1;
	uint64_t reserved_10_63               : 54;
#endif
	} cn66xx;
	struct cvmx_mio_rst_cntlx_cn66xx      cn68xx;
	struct cvmx_mio_rst_cntlx_s           cnf71xx;
};
typedef union cvmx_mio_rst_cntlx cvmx_mio_rst_cntlx_t;

/**
 * cvmx_mio_rst_ctl#
 *
 * Notes:
 * GEN1_Only mode is enabled for PEM0 when QLM1_SPD[0] is set or when sclk < 550Mhz.
 * GEN1_Only mode is enabled for PEM1 when QLM1_SPD[1] is set or when sclk < 550Mhz.
 */
union cvmx_mio_rst_ctlx {
	uint64_t u64;
	struct cvmx_mio_rst_ctlx_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_13_63               : 51;
	uint64_t in_rev_ln                    : 1;  /**< RO access to corresponding pin PCIE*_REV_LANES
                                                         which is used for initial value for REV_LANES
                                                         For INT0/CNTL0: pin PCIE0_REV_LANES
                                                         For INT1/CNTL1: always zero as no PCIE1 pin */
	uint64_t rev_lanes                    : 1;  /**< Reverse the lanes for INT*.
                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized to
                                                         IN_REVLANE value.
                                                         When QLM1_CFG=1, INT0(PEM0) REV_LANES internal
                                                         setting will be always forced to '0', INT1(PEM1)
                                                         will be forced to '1' regardless CSR value. */
	uint64_t gen1_only                    : 1;  /**< Disable PCIE GEN2 Capability.  This bit is
                                                         always unpredictable whenever the controller
                                                         is not attached to any SerDes lanes, and is
                                                         otherwise always set when SCLK is slower than
                                                         550Mhz.
                                                         The MIO_RST_CNTL*[GEN1_ONLY] value is based on
                                                         the MIO_QLM1_CFG[QLM_SPD] value. */
	uint64_t prst_link                    : 1;  /**< Controls whether corresponding controller
                                                         link-down or hot-reset causes the assertion of
                                                         CIU_SOFT_PRST*[SOFT_PRST]

                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized to 0 */
	uint64_t rst_done                     : 1;  /**< Read-only access to controller reset status

                                                         RESET_DONE is always zero (i.e. the controller
                                                         is held in reset) when:
                                                           - CIU_SOFT_PRST*[SOFT_PRST]=1, or
                                                           - RST_RCV==1 and PERST*_L pin is asserted */
	uint64_t rst_link                     : 1;  /**< Controls whether corresponding controller
                                                         link-down or hot-reset causes a warm chip reset
                                                         On cold reset, this field is initialized as
                                                         follows:
                                                            0 = when corresponding HOST_MODE=1
                                                            1 = when corresponding HOST_MODE=0

                                                         Note that a link-down or hot-reset event can
                                                         never cause a warm chip reset when the
                                                         controller is in reset (i.e. can never cause a
                                                         warm reset when RST_DONE==0). */
	uint64_t host_mode                    : 1;  /**< RO access to corresponding strap PCIE*_HOST_MODE
                                                         For CNTL1/INT1, HOST_MODE is always '1' because
                                                         there is no PCIE1_HOST_MODE pin. */
	uint64_t prtmode                      : 2;  /**< Port mode
                                                            0 = port is EP mode
                                                            1 = port is RC mode
                                                            2,3 = Reserved
                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized as
                                                         HOST_MODE (corresponding strap PCIE*_HOST_MODE) */
	uint64_t rst_drv                      : 1;  /**< Controls whether corresponding PERST*_L chip pin
                                                         is driven by the OCTEON.  A warm/soft reset
                                                         will not change this field.  On cold reset,
                                                         this field is initialized as follows:
                                                          0 = when corresponding HOST_MODE=0
                                                          1 = when corresponding HOST_MODE=1

                                                         When set, OCTEON drives the corresponding
                                                         PERST*_L pin. Otherwise, OCTEON does not drive
                                                         the corresponding PERST*_L pin. */
	uint64_t rst_rcv                      : 1;  /**< Controls whether corresponding PERST*_L chip pin
                                                         is recieved by OCTEON.  A warm/soft reset
                                                         will not change this field.  On cold reset,
                                                         this field is initialized as follows:
                                                          0 = when corresponding HOST_MODE=1
                                                          1 = when corresponding HOST_MODE=0

                                                         When RST_RCV==1, the PERST*_L value is
                                                         received and may be used to reset the
                                                         controller and (optionally, based on RST_CHIP)
                                                         warm reset the chip.

                                                         When RST_RCV==1 (and RST_CHIP=0),
                                                         MIO_RST_INT[PERST*] gets set when the PERST*_L
                                                         pin asserts. (This interrupt can alert SW
                                                         whenever the external reset pin initiates a
                                                         controller reset sequence.)

                                                         RST_VAL gives the PERST*_L pin value when
                                                         RST_RCV==1.

                                                         When RST_RCV==0, the PERST*_L pin value is
                                                         ignored. */
	uint64_t rst_chip                     : 1;  /**< Controls whether corresponding PERST*_L chip
                                                         pin causes a chip warm reset like CHIP_RESET_L.
                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized to 0.

                                                         RST_CHIP is not used when RST_RCV==0.

                                                         When RST_RCV==0, RST_CHIP is ignored.

                                                         When RST_RCV==1, RST_CHIP==1, and PERST*_L
                                                         asserts, a chip warm reset will be generated. */
	uint64_t rst_val                      : 1;  /**< Read-only access to corresponding PERST*_L pin
                                                         Unpredictable when RST_RCV==0. Reads as 1 when
                                                         RST_RCV==1 and the PERST*_L pin is asserted.
                                                         Reads as 0 when RST_RCV==1 and the PERST*_L
                                                         pin is not asserted. */
#else
	uint64_t rst_val                      : 1;
	uint64_t rst_chip                     : 1;
	uint64_t rst_rcv                      : 1;
	uint64_t rst_drv                      : 1;
	uint64_t prtmode                      : 2;
	uint64_t host_mode                    : 1;
	uint64_t rst_link                     : 1;
	uint64_t rst_done                     : 1;
	uint64_t prst_link                    : 1;
	uint64_t gen1_only                    : 1;
	uint64_t rev_lanes                    : 1;
	uint64_t in_rev_ln                    : 1;
	uint64_t reserved_13_63               : 51;
#endif
	} s;
	struct cvmx_mio_rst_ctlx_s            cn61xx;
	struct cvmx_mio_rst_ctlx_cn63xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_10_63               : 54;
	uint64_t prst_link                    : 1;  /**< Controls whether corresponding controller
                                                         link-down or hot-reset causes the assertion of
                                                         CIU_SOFT_PRST*[SOFT_PRST]

                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized to 0

                                                         ***NOTE: Added in pass 2.0 */
	uint64_t rst_done                     : 1;  /**< Read-only access to controller reset status

                                                         RESET_DONE is always zero (i.e. the controller
                                                         is held in reset) when:
                                                           - CIU_SOFT_PRST*[SOFT_PRST]=1, or
                                                           - RST_RCV==1 and PERST*_L pin is asserted */
	uint64_t rst_link                     : 1;  /**< Controls whether corresponding controller
                                                         link-down or hot-reset causes a warm chip reset
                                                         On cold reset, this field is initialized as
                                                         follows:
                                                            0 = when corresponding strap QLM*_HOST_MODE=1
                                                            1 = when corresponding strap QLM*_HOST_MODE=0

                                                         Note that a link-down or hot-reset event can
                                                         never cause a warm chip reset when the
                                                         controller is in reset (i.e. can never cause a
                                                         warm reset when RST_DONE==0). */
	uint64_t host_mode                    : 1;  /**< RO access to corresponding strap QLM*_HOST_MODE */
	uint64_t prtmode                      : 2;  /**< Port mode
                                                            0 = port is EP mode
                                                            1 = port is RC mode
                                                            2,3 = Reserved
                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized as
                                                         follows:
                                                            0 = when corresponding strap QLM*_HOST_MODE=0
                                                            1 = when corresponding strap QLM*_HOST_MODE=1 */
	uint64_t rst_drv                      : 1;  /**< Controls whether corresponding PERST*_L chip pin
                                                         is driven by the OCTEON.  A warm/soft reset
                                                         will not change this field.  On cold reset,
                                                         this field is initialized as follows:
                                                          0 = when corresponding strap QLM*_HOST_MODE=0
                                                          1 = when corresponding strap QLM*_HOST_MODE=1

                                                         When set, OCTEON drives the corresponding
                                                         PERST*_L pin. Otherwise, OCTEON does not drive
                                                         the corresponding PERST*_L pin. */
	uint64_t rst_rcv                      : 1;  /**< Controls whether corresponding PERST*_L chip pin
                                                         is recieved by OCTEON.  A warm/soft reset
                                                         will not change this field.  On cold reset,
                                                         this field is initialized as follows:
                                                          0 = when corresponding strap QLM*_HOST_MODE=1
                                                          1 = when corresponding strap QLM*_HOST_MODE=0

                                                         When RST_RCV==1, the PERST*_L value is
                                                         received and may be used to reset the
                                                         controller and (optionally, based on RST_CHIP)
                                                         warm reset the chip.

                                                         When RST_RCV==1 (and RST_CHIP=0),
                                                         MIO_RST_INT[PERST*] gets set when the PERST*_L
                                                         pin asserts. (This interrupt can alert SW
                                                         whenever the external reset pin initiates a
                                                         controller reset sequence.)

                                                         RST_VAL gives the PERST*_L pin value when
                                                         RST_RCV==1.

                                                         When RST_RCV==0, the PERST*_L pin value is
                                                         ignored. */
	uint64_t rst_chip                     : 1;  /**< Controls whether corresponding PERST*_L chip
                                                         pin causes a chip warm reset like CHIP_RESET_L.
                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized to 0.

                                                         RST_CHIP is not used when RST_RCV==0.

                                                         When RST_RCV==0, RST_CHIP is ignored.

                                                         When RST_RCV==1, RST_CHIP==1, and PERST*_L
                                                         asserts, a chip warm reset will be generated. */
	uint64_t rst_val                      : 1;  /**< Read-only access to corresponding PERST*_L pin
                                                         Unpredictable when RST_RCV==0. Reads as 1 when
                                                         RST_RCV==1 and the PERST*_L pin is asserted.
                                                         Reads as 0 when RST_RCV==1 and the PERST*_L
                                                         pin is not asserted. */
#else
	uint64_t rst_val                      : 1;
	uint64_t rst_chip                     : 1;
	uint64_t rst_rcv                      : 1;
	uint64_t rst_drv                      : 1;
	uint64_t prtmode                      : 2;
	uint64_t host_mode                    : 1;
	uint64_t rst_link                     : 1;
	uint64_t rst_done                     : 1;
	uint64_t prst_link                    : 1;
	uint64_t reserved_10_63               : 54;
#endif
	} cn63xx;
	struct cvmx_mio_rst_ctlx_cn63xxp1 {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_9_63                : 55;
	uint64_t rst_done                     : 1;  /**< Read-only access to controller reset status

                                                         RESET_DONE is always zero (i.e. the controller
                                                         is held in reset) when:
                                                           - CIU_SOFT_PRST*[SOFT_PRST]=1, or
                                                           - RST_RCV==1 and PERST*_L pin is asserted */
	uint64_t rst_link                     : 1;  /**< Controls whether corresponding controller
                                                         link-down or hot-reset causes a warm chip reset
                                                         On cold reset, this field is initialized as
                                                         follows:
                                                            0 = when corresponding strap QLM*_HOST_MODE=1
                                                            1 = when corresponding strap QLM*_HOST_MODE=0

                                                         Note that a link-down or hot-reset event can
                                                         never cause a warm chip reset when the
                                                         controller is in reset (i.e. can never cause a
                                                         warm reset when RST_DONE==0). */
	uint64_t host_mode                    : 1;  /**< RO access to corresponding strap QLM*_HOST_MODE */
	uint64_t prtmode                      : 2;  /**< Port mode
                                                            0 = port is EP mode
                                                            1 = port is RC mode
                                                            2,3 = Reserved
                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized as
                                                         follows:
                                                            0 = when corresponding strap QLM*_HOST_MODE=0
                                                            1 = when corresponding strap QLM*_HOST_MODE=1 */
	uint64_t rst_drv                      : 1;  /**< Controls whether corresponding PERST*_L chip pin
                                                         is driven by the OCTEON.  A warm/soft reset
                                                         will not change this field.  On cold reset,
                                                         this field is initialized as follows:
                                                          0 = when corresponding strap QLM*_HOST_MODE=0
                                                          1 = when corresponding strap QLM*_HOST_MODE=1

                                                         When set, OCTEON drives the corresponding
                                                         PERST*_L pin. Otherwise, OCTEON does not drive
                                                         the corresponding PERST*_L pin. */
	uint64_t rst_rcv                      : 1;  /**< Controls whether corresponding PERST*_L chip pin
                                                         is recieved by OCTEON.  A warm/soft reset
                                                         will not change this field.  On cold reset,
                                                         this field is initialized as follows:
                                                          0 = when corresponding strap QLM*_HOST_MODE=1
                                                          1 = when corresponding strap QLM*_HOST_MODE=0

                                                         When RST_RCV==1, the PERST*_L value is
                                                         received and may be used to reset the
                                                         controller and (optionally, based on RST_CHIP)
                                                         warm reset the chip.

                                                         When RST_RCV==1 (and RST_CHIP=0),
                                                         MIO_RST_INT[PERST*] gets set when the PERST*_L
                                                         pin asserts. (This interrupt can alert SW
                                                         whenever the external reset pin initiates a
                                                         controller reset sequence.)

                                                         RST_VAL gives the PERST*_L pin value when
                                                         RST_RCV==1.

                                                         When RST_RCV==0, the PERST*_L pin value is
                                                         ignored. */
	uint64_t rst_chip                     : 1;  /**< Controls whether corresponding PERST*_L chip
                                                         pin causes a chip warm reset like CHIP_RESET_L.
                                                         A warm/soft reset will not change this field.
                                                         On cold reset, this field is initialized to 0.

                                                         RST_CHIP is not used when RST_RCV==0.

                                                         When RST_RCV==0, RST_CHIP is ignored.

                                                         When RST_RCV==1, RST_CHIP==1, and PERST*_L
                                                         asserts, a chip warm reset will be generated. */
	uint64_t rst_val                      : 1;  /**< Read-only access to corresponding PERST*_L pin
                                                         Unpredictable when RST_RCV==0. Reads as 1 when
                                                         RST_RCV==1 and the PERST*_L pin is asserted.
                                                         Reads as 0 when RST_RCV==1 and the PERST*_L
                                                         pin is not asserted. */
#else
	uint64_t rst_val                      : 1;
	uint64_t rst_chip                     : 1;
	uint64_t rst_rcv                      : 1;
	uint64_t rst_drv                      : 1;
	uint64_t prtmode                      : 2;
	uint64_t host_mode                    : 1;
	uint64_t rst_link                     : 1;
	uint64_t rst_done                     : 1;
	uint64_t reserved_9_63                : 55;
#endif
	} cn63xxp1;
	struct cvmx_mio_rst_ctlx_cn63xx       cn66xx;
	struct cvmx_mio_rst_ctlx_cn63xx       cn68xx;
	struct cvmx_mio_rst_ctlx_cn63xx       cn68xxp1;
	struct cvmx_mio_rst_ctlx_s            cnf71xx;
};
typedef union cvmx_mio_rst_ctlx cvmx_mio_rst_ctlx_t;

/**
 * cvmx_mio_rst_delay
 */
union cvmx_mio_rst_delay {
	uint64_t u64;
	struct cvmx_mio_rst_delay_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_32_63               : 32;
	uint64_t warm_rst_dly                 : 16; /**< A warm reset immediately causes an early warm
                                                         reset notification.  However, the assertion of
                                                         warm reset will be delayed this many sclks.
                                                         A warm/soft reset will not change this field.
                                                         NOTE: This must be at least 500 dclks */
	uint64_t soft_rst_dly                 : 16; /**< A soft reset immediately causes an early soft
                                                         reset notification.  However, the assertion of
                                                         soft reset will be delayed this many sclks.
                                                         A warm/soft reset will not change this field.
                                                         NOTE: This must be at least 500 dclks */
#else
	uint64_t soft_rst_dly                 : 16;
	uint64_t warm_rst_dly                 : 16;
	uint64_t reserved_32_63               : 32;
#endif
	} s;
	struct cvmx_mio_rst_delay_s           cn61xx;
	struct cvmx_mio_rst_delay_s           cn63xx;
	struct cvmx_mio_rst_delay_s           cn63xxp1;
	struct cvmx_mio_rst_delay_s           cn66xx;
	struct cvmx_mio_rst_delay_s           cn68xx;
	struct cvmx_mio_rst_delay_s           cn68xxp1;
	struct cvmx_mio_rst_delay_s           cnf71xx;
};
typedef union cvmx_mio_rst_delay cvmx_mio_rst_delay_t;

/**
 * cvmx_mio_rst_int
 *
 * MIO_RST_INT = MIO Reset Interrupt Register
 *
 */
union cvmx_mio_rst_int {
	uint64_t u64;
	struct cvmx_mio_rst_int_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_10_63               : 54;
	uint64_t perst1                       : 1;  /**< PERST1_L asserted while MIO_RST_CTL1[RST_RCV]=1
                                                         and MIO_RST_CTL1[RST_CHIP]=0 */
	uint64_t perst0                       : 1;  /**< PERST0_L asserted while MIO_RST_CTL0[RST_RCV]=1
                                                         and MIO_RST_CTL0[RST_CHIP]=0 */
	uint64_t reserved_4_7                 : 4;
	uint64_t rst_link3                    : 1;  /**< A controller3 link-down/hot-reset occurred while
                                                         MIO_RST_CNTL3[RST_LINK]=0.  Software must assert
                                                         then de-assert CIU_SOFT_PRST3[SOFT_PRST] */
	uint64_t rst_link2                    : 1;  /**< A controller2 link-down/hot-reset occurred while
                                                         MIO_RST_CNTL2[RST_LINK]=0.  Software must assert
                                                         then de-assert CIU_SOFT_PRST2[SOFT_PRST] */
	uint64_t rst_link1                    : 1;  /**< A controller1 link-down/hot-reset occurred while
                                                         MIO_RST_CTL1[RST_LINK]=0.  Software must assert
                                                         then de-assert CIU_SOFT_PRST1[SOFT_PRST] */
	uint64_t rst_link0                    : 1;  /**< A controller0 link-down/hot-reset occurred while
                                                         MIO_RST_CTL0[RST_LINK]=0.  Software must assert
                                                         then de-assert CIU_SOFT_PRST[SOFT_PRST] */
#else
	uint64_t rst_link0                    : 1;
	uint64_t rst_link1                    : 1;
	uint64_t rst_link2                    : 1;
	uint64_t rst_link3                    : 1;
	uint64_t reserved_4_7                 : 4;
	uint64_t perst0                       : 1;
	uint64_t perst1                       : 1;
	uint64_t reserved_10_63               : 54;
#endif
	} s;
	struct cvmx_mio_rst_int_cn61xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_10_63               : 54;
	uint64_t perst1                       : 1;  /**< PERST1_L asserted while MIO_RST_CTL1[RST_RCV]=1
                                                         and MIO_RST_CTL1[RST_CHIP]=0 */
	uint64_t perst0                       : 1;  /**< PERST0_L asserted while MIO_RST_CTL0[RST_RCV]=1
                                                         and MIO_RST_CTL0[RST_CHIP]=0 */
	uint64_t reserved_2_7                 : 6;
	uint64_t rst_link1                    : 1;  /**< A controller1 link-down/hot-reset occurred while
                                                         MIO_RST_CTL1[RST_LINK]=0.  Software must assert
                                                         then de-assert CIU_SOFT_PRST1[SOFT_PRST] */
	uint64_t rst_link0                    : 1;  /**< A controller0 link-down/hot-reset occurred while
                                                         MIO_RST_CTL0[RST_LINK]=0.  Software must assert
                                                         then de-assert CIU_SOFT_PRST[SOFT_PRST] */
#else
	uint64_t rst_link0                    : 1;
	uint64_t rst_link1                    : 1;
	uint64_t reserved_2_7                 : 6;
	uint64_t perst0                       : 1;
	uint64_t perst1                       : 1;
	uint64_t reserved_10_63               : 54;
#endif
	} cn61xx;
	struct cvmx_mio_rst_int_cn61xx        cn63xx;
	struct cvmx_mio_rst_int_cn61xx        cn63xxp1;
	struct cvmx_mio_rst_int_s             cn66xx;
	struct cvmx_mio_rst_int_cn61xx        cn68xx;
	struct cvmx_mio_rst_int_cn61xx        cn68xxp1;
	struct cvmx_mio_rst_int_cn61xx        cnf71xx;
};
typedef union cvmx_mio_rst_int cvmx_mio_rst_int_t;

/**
 * cvmx_mio_rst_int_en
 *
 * MIO_RST_INT_EN = MIO Reset Interrupt Enable Register
 *
 */
union cvmx_mio_rst_int_en {
	uint64_t u64;
	struct cvmx_mio_rst_int_en_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_10_63               : 54;
	uint64_t perst1                       : 1;  /**< Controller1 PERST reset interrupt enable */
	uint64_t perst0                       : 1;  /**< Controller0 PERST reset interrupt enable */
	uint64_t reserved_4_7                 : 4;
	uint64_t rst_link3                    : 1;  /**< Controller3 link-down/hot reset interrupt enable */
	uint64_t rst_link2                    : 1;  /**< Controller2 link-down/hot reset interrupt enable */
	uint64_t rst_link1                    : 1;  /**< Controller1 link-down/hot reset interrupt enable */
	uint64_t rst_link0                    : 1;  /**< Controller0 link-down/hot reset interrupt enable */
#else
	uint64_t rst_link0                    : 1;
	uint64_t rst_link1                    : 1;
	uint64_t rst_link2                    : 1;
	uint64_t rst_link3                    : 1;
	uint64_t reserved_4_7                 : 4;
	uint64_t perst0                       : 1;
	uint64_t perst1                       : 1;
	uint64_t reserved_10_63               : 54;
#endif
	} s;
	struct cvmx_mio_rst_int_en_cn61xx {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_10_63               : 54;
	uint64_t perst1                       : 1;  /**< Controller1 PERST reset interrupt enable */
	uint64_t perst0                       : 1;  /**< Controller0 PERST reset interrupt enable */
	uint64_t reserved_2_7                 : 6;
	uint64_t rst_link1                    : 1;  /**< Controller1 link-down/hot reset interrupt enable */
	uint64_t rst_link0                    : 1;  /**< Controller0 link-down/hot reset interrupt enable */
#else
	uint64_t rst_link0                    : 1;
	uint64_t rst_link1                    : 1;
	uint64_t reserved_2_7                 : 6;
	uint64_t perst0                       : 1;
	uint64_t perst1                       : 1;
	uint64_t reserved_10_63               : 54;
#endif
	} cn61xx;
	struct cvmx_mio_rst_int_en_cn61xx     cn63xx;
	struct cvmx_mio_rst_int_en_cn61xx     cn63xxp1;
	struct cvmx_mio_rst_int_en_s          cn66xx;
	struct cvmx_mio_rst_int_en_cn61xx     cn68xx;
	struct cvmx_mio_rst_int_en_cn61xx     cn68xxp1;
	struct cvmx_mio_rst_int_en_cn61xx     cnf71xx;
};
typedef union cvmx_mio_rst_int_en cvmx_mio_rst_int_en_t;

/**
 * cvmx_mio_tws#_int
 *
 * MIO_TWSX_INT = TWSX Interrupt Register
 *
 * This register contains the TWSI interrupt enable mask and the interrupt source bits.  Note: the
 * interrupt source bit for the TWSI core interrupt (CORE_INT) is read-only, the appropriate sequence
 * must be written to the TWSI core to clear this interrupt.  The other interrupt source bits are write-
 * one-to-clear.  TS_INT is set on the update of the MIO_TWS_TWSI_SW register (i.e. when it is written
 * by a TWSI device).  ST_INT is set whenever the valid bit of the MIO_TWS_SW_TWSI is cleared (see above
 * for reasons).
 *
 * Note: When using the high-level controller, CORE_EN should be clear and CORE_INT should be ignored.
 * Conversely, when the high-level controller is disabled, ST_EN / TS_EN should be clear and ST_INT /
 * TS_INT should be ignored.
 *
 * This register also contains a read-only copy of the TWSI bus (SCL and SDA) as well as control bits to
 * override the current state of the TWSI bus (SCL_OVR and SDA_OVR).  Setting an override bit high will
 * result in the open drain driver being activated, thus driving the corresponding signal low.
 */
union cvmx_mio_twsx_int {
	uint64_t u64;
	struct cvmx_mio_twsx_int_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_12_63               : 52;
	uint64_t scl                          : 1;  /**< SCL */
	uint64_t sda                          : 1;  /**< SDA */
	uint64_t scl_ovr                      : 1;  /**< SCL override */
	uint64_t sda_ovr                      : 1;  /**< SDA override */
	uint64_t reserved_7_7                 : 1;
	uint64_t core_en                      : 1;  /**< TWSI core interrupt enable */
	uint64_t ts_en                        : 1;  /**< MIO_TWS_TWSI_SW register update interrupt enable */
	uint64_t st_en                        : 1;  /**< MIO_TWS_SW_TWSI register update interrupt enable */
	uint64_t reserved_3_3                 : 1;
	uint64_t core_int                     : 1;  /**< TWSI core interrupt */
	uint64_t ts_int                       : 1;  /**< MIO_TWS_TWSI_SW register update interrupt */
	uint64_t st_int                       : 1;  /**< MIO_TWS_SW_TWSI register update interrupt */
#else
	uint64_t st_int                       : 1;
	uint64_t ts_int                       : 1;
	uint64_t core_int                     : 1;
	uint64_t reserved_3_3                 : 1;
	uint64_t st_en                        : 1;
	uint64_t ts_en                        : 1;
	uint64_t core_en                      : 1;
	uint64_t reserved_7_7                 : 1;
	uint64_t sda_ovr                      : 1;
	uint64_t scl_ovr                      : 1;
	uint64_t sda                          : 1;
	uint64_t scl                          : 1;
	uint64_t reserved_12_63               : 52;
#endif
	} s;
	struct cvmx_mio_twsx_int_s            cn30xx;
	struct cvmx_mio_twsx_int_s            cn31xx;
	struct cvmx_mio_twsx_int_s            cn38xx;
	struct cvmx_mio_twsx_int_cn38xxp2 {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_7_63                : 57;
	uint64_t core_en                      : 1;  /**< TWSI core interrupt enable */
	uint64_t ts_en                        : 1;  /**< MIO_TWS_TWSI_SW register update interrupt enable */
	uint64_t st_en                        : 1;  /**< MIO_TWS_SW_TWSI register update interrupt enable */
	uint64_t reserved_3_3                 : 1;
	uint64_t core_int                     : 1;  /**< TWSI core interrupt */
	uint64_t ts_int                       : 1;  /**< MIO_TWS_TWSI_SW register update interrupt */
	uint64_t st_int                       : 1;  /**< MIO_TWS_SW_TWSI register update interrupt */
#else
	uint64_t st_int                       : 1;
	uint64_t ts_int                       : 1;
	uint64_t core_int                     : 1;
	uint64_t reserved_3_3                 : 1;
	uint64_t st_en                        : 1;
	uint64_t ts_en                        : 1;
	uint64_t core_en                      : 1;
	uint64_t reserved_7_63                : 57;
#endif
	} cn38xxp2;
	struct cvmx_mio_twsx_int_s            cn50xx;
	struct cvmx_mio_twsx_int_s            cn52xx;
	struct cvmx_mio_twsx_int_s            cn52xxp1;
	struct cvmx_mio_twsx_int_s            cn56xx;
	struct cvmx_mio_twsx_int_s            cn56xxp1;
	struct cvmx_mio_twsx_int_s            cn58xx;
	struct cvmx_mio_twsx_int_s            cn58xxp1;
	struct cvmx_mio_twsx_int_s            cn61xx;
	struct cvmx_mio_twsx_int_s            cn63xx;
	struct cvmx_mio_twsx_int_s            cn63xxp1;
	struct cvmx_mio_twsx_int_s            cn66xx;
	struct cvmx_mio_twsx_int_s            cn68xx;
	struct cvmx_mio_twsx_int_s            cn68xxp1;
	struct cvmx_mio_twsx_int_s            cnf71xx;
};
typedef union cvmx_mio_twsx_int cvmx_mio_twsx_int_t;

/**
 * cvmx_mio_tws#_sw_twsi
 *
 * MIO_TWSX_SW_TWSI = TWSX Software to TWSI Register
 *
 * This register allows software to
 *    - initiate TWSI interface master-mode operations with a write and read the result with a read
 *    - load four bytes for later retrieval (slave mode) with a write and check validity with a read
 *    - launch a TWSI controller configuration read/write with a write and read the result with a read
 *
 * This register should be read or written by software, and read by the TWSI device. The TWSI device can
 * use either two-byte or five-byte reads to reference this register.
 *
 * The TWSI device considers this register valid when V==1 and SLONLY==1.
 */
union cvmx_mio_twsx_sw_twsi {
	uint64_t u64;
	struct cvmx_mio_twsx_sw_twsi_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t v                            : 1;  /**< Valid bit
                                                         - Set on a write (should always be written with
                                                           a 1)
                                                         - Cleared when a TWSI master mode op completes
                                                         - Cleared when a TWSI configuration register
                                                           access completes
                                                         - Cleared when the TWSI device reads the
                                                           register if SLONLY==1 */
	uint64_t slonly                       : 1;  /**< Slave Only Mode
                                                         - No operation is initiated with a write when
                                                           this bit is set - only D field is updated in
                                                           this case
                                                         - When clear, a write initiates either a TWSI
                                                           master-mode operation or a TWSI configuration
                                                           register access */
	uint64_t eia                          : 1;  /**< Extended Internal Address - send additional
                                                         internal address byte (MSB of IA is from IA field
                                                         of MIO_TWS_SW_TWSI_EXT) */
	uint64_t op                           : 4;  /**< Opcode field - When the register is written with
                                                         SLONLY==0, initiate a read or write:
                                                           0000 => 7-bit Byte Master Mode TWSI Op
                                                           0001 => 7-bit Byte Combined Read Master Mode Op
                                                                   7-bit Byte Write w/ IA Master Mode Op
                                                           0010 => 10-bit Byte Master Mode TWSI Op
                                                           0011 => 10-bit Byte Combined Read Master Mode Op
                                                                   10-bit Byte Write w/ IA Master Mode Op
                                                           0100 => TWSI Master Clock Register
                                                           0110 => See EOP field
                                                           1000 => 7-bit 4-byte Master Mode TWSI Op
                                                           1001 => 7-bit 4-byte Comb. Read Master Mode Op
                                                                   7-bit 4-byte Write w/ IA Master Mode Op
                                                           1010 => 10-bit 4-byte Master Mode TWSI Op
                                                           1011 => 10-bit 4-byte Comb. Read Master Mode Op
                                                                   10-bit 4-byte Write w/ IA Master Mode Op */
	uint64_t r                            : 1;  /**< Read bit or result
                                                         - If set on a write when SLONLY==0, the
                                                           operation is a read
                                                         - On a read, this bit returns the result
                                                           indication for the most recent master mode
                                                           operation (1 = success, 0 = fail) */
	uint64_t sovr                         : 1;  /**< Size Override - if set, use the SIZE field to
                                                         determine Master Mode Op size rather than what
                                                         the Opcode field specifies.  For operations
                                                         greater than 4 bytes, the additional data will be
                                                         contained in the D field of MIO_TWS_SW_TWSI_EXT */
	uint64_t size                         : 3;  /**< Size in bytes of Master Mode Op if the Size
                                                         Override bit is set.  Specified in -1 notation
                                                         (i.e. 0 = 1 byte, 1 = 2 bytes ... 7 = 8 bytes) */
	uint64_t scr                          : 2;  /**< Scratch - unused, but retain state */
	uint64_t a                            : 10; /**< Address field
                                                          - the address of the remote device for a master
                                                            mode operation
                                                          - A<9:7> are only used for 10-bit addressing
                                                         Note that when mastering a 7-bit OP, A<6:0> should
                                                         not take any of the values 0x78, 0x79, 0x7A nor
                                                         0x7B (these 7-bit addresses are reserved to
                                                         extend to 10-bit addressing). */
	uint64_t ia                           : 5;  /**< Internal Address - Used when launching a master
                                                         mode combined read / write with internal address
                                                         (lower 3 bits are contained in the EOP_IA field) */
	uint64_t eop_ia                       : 3;  /**< Extra opcode (when OP<3:0> == 0110 and SLONLY==0):
                                                           000 => TWSI Slave Address Register
                                                           001 => TWSI Data Register
                                                           010 => TWSI Control Register
                                                           011 => TWSI Clock Control Register (when R == 0)
                                                           011 => TWSI Status Register (when R == 1)
                                                           100 => TWSI Extended Slave Register
                                                           111 => TWSI Soft Reset Register
                                                         Also the lower 3 bits of Internal Address when
                                                           launching a master mode combined read / write
                                                           with internal address */
	uint64_t d                            : 32; /**< Data Field
                                                         Used on a write when
                                                           - initiating a master-mode write (SLONLY==0)
                                                           - writing a TWSI config register (SLONLY==0)
                                                           - a slave mode write (SLONLY==1)
                                                         The read value is updated by
                                                           - a write to this register
                                                           - master mode completion (contains result or
                                                             error code)
                                                           - TWSI config register read (contains result) */
#else
	uint64_t d                            : 32;
	uint64_t eop_ia                       : 3;
	uint64_t ia                           : 5;
	uint64_t a                            : 10;
	uint64_t scr                          : 2;
	uint64_t size                         : 3;
	uint64_t sovr                         : 1;
	uint64_t r                            : 1;
	uint64_t op                           : 4;
	uint64_t eia                          : 1;
	uint64_t slonly                       : 1;
	uint64_t v                            : 1;
#endif
	} s;
	struct cvmx_mio_twsx_sw_twsi_s        cn30xx;
	struct cvmx_mio_twsx_sw_twsi_s        cn31xx;
	struct cvmx_mio_twsx_sw_twsi_s        cn38xx;
	struct cvmx_mio_twsx_sw_twsi_s        cn38xxp2;
	struct cvmx_mio_twsx_sw_twsi_s        cn50xx;
	struct cvmx_mio_twsx_sw_twsi_s        cn52xx;
	struct cvmx_mio_twsx_sw_twsi_s        cn52xxp1;
	struct cvmx_mio_twsx_sw_twsi_s        cn56xx;
	struct cvmx_mio_twsx_sw_twsi_s        cn56xxp1;
	struct cvmx_mio_twsx_sw_twsi_s        cn58xx;
	struct cvmx_mio_twsx_sw_twsi_s        cn58xxp1;
	struct cvmx_mio_twsx_sw_twsi_s        cn61xx;
	struct cvmx_mio_twsx_sw_twsi_s        cn63xx;
	struct cvmx_mio_twsx_sw_twsi_s        cn63xxp1;
	struct cvmx_mio_twsx_sw_twsi_s        cn66xx;
	struct cvmx_mio_twsx_sw_twsi_s        cn68xx;
	struct cvmx_mio_twsx_sw_twsi_s        cn68xxp1;
	struct cvmx_mio_twsx_sw_twsi_s        cnf71xx;
};
typedef union cvmx_mio_twsx_sw_twsi cvmx_mio_twsx_sw_twsi_t;

/**
 * cvmx_mio_tws#_sw_twsi_ext
 *
 * MIO_TWSX_SW_TWSI_EXT = TWSX Software to TWSI Extension Register
 *
 * This register contains an additional byte of internal address and 4 additional bytes of data to be
 * used with TWSI master mode operations.  IA will be sent as the first byte of internal address when
 * performing master mode combined read / write with internal address operations and the EIA bit of
 * MIO_TWS_SW_TWSI is set.  D extends the data field of MIO_TWS_SW_TWSI for a total of 8 bytes (SOVR
 * must be set to perform operations greater than 4 bytes).
 */
union cvmx_mio_twsx_sw_twsi_ext {
	uint64_t u64;
	struct cvmx_mio_twsx_sw_twsi_ext_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_40_63               : 24;
	uint64_t ia                           : 8;  /**< Extended Internal Address */
	uint64_t d                            : 32; /**< Extended Data Field */
#else
	uint64_t d                            : 32;
	uint64_t ia                           : 8;
	uint64_t reserved_40_63               : 24;
#endif
	} s;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn30xx;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn31xx;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn38xx;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn38xxp2;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn50xx;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn52xx;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn52xxp1;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn56xx;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn56xxp1;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn58xx;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn58xxp1;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn61xx;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn63xx;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn63xxp1;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn66xx;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn68xx;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cn68xxp1;
	struct cvmx_mio_twsx_sw_twsi_ext_s    cnf71xx;
};
typedef union cvmx_mio_twsx_sw_twsi_ext cvmx_mio_twsx_sw_twsi_ext_t;

/**
 * cvmx_mio_tws#_twsi_sw
 *
 * MIO_TWSX_TWSI_SW = TWSX TWSI to Software Register
 *
 * This register allows the TWSI device to transfer data to software and later check that software has
 * received the information.
 *
 * This register should be read or written by the TWSI device, and read by software. The TWSI device can
 * use one-byte or four-byte payload writes, and two-byte payload reads.
 *
 * The TWSI device considers this register valid when V==1.
 */
union cvmx_mio_twsx_twsi_sw {
	uint64_t u64;
	struct cvmx_mio_twsx_twsi_sw_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t v                            : 2;  /**< Valid Bits
                                                         - Not directly writable
                                                         - Set to 1 on any write by the TWSI device
                                                         - Cleared on any read by software */
	uint64_t reserved_32_61               : 30;
	uint64_t d                            : 32; /**< Data Field - updated on a write by the TWSI device */
#else
	uint64_t d                            : 32;
	uint64_t reserved_32_61               : 30;
	uint64_t v                            : 2;
#endif
	} s;
	struct cvmx_mio_twsx_twsi_sw_s        cn30xx;
	struct cvmx_mio_twsx_twsi_sw_s        cn31xx;
	struct cvmx_mio_twsx_twsi_sw_s        cn38xx;
	struct cvmx_mio_twsx_twsi_sw_s        cn38xxp2;
	struct cvmx_mio_twsx_twsi_sw_s        cn50xx;
	struct cvmx_mio_twsx_twsi_sw_s        cn52xx;
	struct cvmx_mio_twsx_twsi_sw_s        cn52xxp1;
	struct cvmx_mio_twsx_twsi_sw_s        cn56xx;
	struct cvmx_mio_twsx_twsi_sw_s        cn56xxp1;
	struct cvmx_mio_twsx_twsi_sw_s        cn58xx;
	struct cvmx_mio_twsx_twsi_sw_s        cn58xxp1;
	struct cvmx_mio_twsx_twsi_sw_s        cn61xx;
	struct cvmx_mio_twsx_twsi_sw_s        cn63xx;
	struct cvmx_mio_twsx_twsi_sw_s        cn63xxp1;
	struct cvmx_mio_twsx_twsi_sw_s        cn66xx;
	struct cvmx_mio_twsx_twsi_sw_s        cn68xx;
	struct cvmx_mio_twsx_twsi_sw_s        cn68xxp1;
	struct cvmx_mio_twsx_twsi_sw_s        cnf71xx;
};
typedef union cvmx_mio_twsx_twsi_sw cvmx_mio_twsx_twsi_sw_t;

/**
 * cvmx_mio_uart#_dlh
 *
 * MIO_UARTX_DLH = MIO UARTX Divisor Latch High Register
 *
 * The DLH (Divisor Latch High) register in conjunction with DLL (Divisor Latch Low) register form a
 * 16-bit, read/write, Divisor Latch register that contains the baud rate divisor for the UART. It is
 * accessed by first setting the DLAB bit (bit 7) in the Line Control Register (LCR). The output baud
 * rate is equal to eclk frequency divided by sixteen times the value of the baud rate divisor, as
 * follows: baud rate = eclk / (16 * divisor).
 *
 * Note that the BUSY bit (bit 0) of the UART Status Register (USR) must be clear before writing this
 * register. BUSY bit is always clear in PASS3.
 *
 * Note that with the Divisor Latch Registers (DLL and DLH) set to zero, the baud clock is disabled
 * and no serial communications will occur. Also, once the DLL or DLH is set, at least 8 clock cycles
 * of eclk should be allowed to pass before transmitting or receiving data.
 *
 * Note: The address below is an alias to simplify these CSR descriptions. It should be known that the
 * IER and DLH registers are the same.
 */
union cvmx_mio_uartx_dlh {
	uint64_t u64;
	struct cvmx_mio_uartx_dlh_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t dlh                          : 8;  /**< Divisor Latch High Register */
#else
	uint64_t dlh                          : 8;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uartx_dlh_s           cn30xx;
	struct cvmx_mio_uartx_dlh_s           cn31xx;
	struct cvmx_mio_uartx_dlh_s           cn38xx;
	struct cvmx_mio_uartx_dlh_s           cn38xxp2;
	struct cvmx_mio_uartx_dlh_s           cn50xx;
	struct cvmx_mio_uartx_dlh_s           cn52xx;
	struct cvmx_mio_uartx_dlh_s           cn52xxp1;
	struct cvmx_mio_uartx_dlh_s           cn56xx;
	struct cvmx_mio_uartx_dlh_s           cn56xxp1;
	struct cvmx_mio_uartx_dlh_s           cn58xx;
	struct cvmx_mio_uartx_dlh_s           cn58xxp1;
	struct cvmx_mio_uartx_dlh_s           cn61xx;
	struct cvmx_mio_uartx_dlh_s           cn63xx;
	struct cvmx_mio_uartx_dlh_s           cn63xxp1;
	struct cvmx_mio_uartx_dlh_s           cn66xx;
	struct cvmx_mio_uartx_dlh_s           cn68xx;
	struct cvmx_mio_uartx_dlh_s           cn68xxp1;
	struct cvmx_mio_uartx_dlh_s           cnf71xx;
};
typedef union cvmx_mio_uartx_dlh cvmx_mio_uartx_dlh_t;
typedef cvmx_mio_uartx_dlh_t cvmx_uart_dlh_t;

/**
 * cvmx_mio_uart#_dll
 *
 * MIO_UARTX_DLL = MIO UARTX Divisor Latch Low Register
 *
 * The DLH (Divisor Latch High) register in conjunction with DLL (Divisor Latch Low) register form a
 * 16-bit, read/write, Divisor Latch register that contains the baud rate divisor for the UART. It is
 * accessed by first setting the DLAB bit (bit 7) in the Line Control Register (LCR). The output baud
 * rate is equal to eclk frequency divided by sixteen times the value of the baud rate divisor, as
 * follows: baud rate = eclk / (16 * divisor).
 *
 * Note that the BUSY bit (bit 0) of the UART Status Register (USR) must be clear before writing this
 * register. BUSY bit is always clear in PASS3.
 *
 * Note that with the Divisor Latch Registers (DLL and DLH) set to zero, the baud clock is disabled
 * and no serial communications will occur. Also, once the DLL or DLH is set, at least 8 clock cycles
 * of eclk should be allowed to pass before transmitting or receiving data.
 *
 * Note: The address below is an alias to simplify these CSR descriptions. It should be known that the
 * RBR, THR, and DLL registers are the same.
 */
union cvmx_mio_uartx_dll {
	uint64_t u64;
	struct cvmx_mio_uartx_dll_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t dll                          : 8;  /**< Divisor Latch Low Register */
#else
	uint64_t dll                          : 8;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uartx_dll_s           cn30xx;
	struct cvmx_mio_uartx_dll_s           cn31xx;
	struct cvmx_mio_uartx_dll_s           cn38xx;
	struct cvmx_mio_uartx_dll_s           cn38xxp2;
	struct cvmx_mio_uartx_dll_s           cn50xx;
	struct cvmx_mio_uartx_dll_s           cn52xx;
	struct cvmx_mio_uartx_dll_s           cn52xxp1;
	struct cvmx_mio_uartx_dll_s           cn56xx;
	struct cvmx_mio_uartx_dll_s           cn56xxp1;
	struct cvmx_mio_uartx_dll_s           cn58xx;
	struct cvmx_mio_uartx_dll_s           cn58xxp1;
	struct cvmx_mio_uartx_dll_s           cn61xx;
	struct cvmx_mio_uartx_dll_s           cn63xx;
	struct cvmx_mio_uartx_dll_s           cn63xxp1;
	struct cvmx_mio_uartx_dll_s           cn66xx;
	struct cvmx_mio_uartx_dll_s           cn68xx;
	struct cvmx_mio_uartx_dll_s           cn68xxp1;
	struct cvmx_mio_uartx_dll_s           cnf71xx;
};
typedef union cvmx_mio_uartx_dll cvmx_mio_uartx_dll_t;
typedef cvmx_mio_uartx_dll_t cvmx_uart_dll_t;

/**
 * cvmx_mio_uart#_far
 *
 * MIO_UARTX_FAR = MIO UARTX FIFO Access Register
 *
 * The FIFO Access Register (FAR) is used to enable a FIFO access mode for testing, so that the receive
 * FIFO can be written by software and the transmit FIFO can be read by software when the FIFOs are
 * enabled. When FIFOs are not enabled it allows the RBR to be written by software and the THR to be read
 * by software. Note, that when the FIFO access mode is enabled/disabled, the control portion of the
 * receive FIFO and transmit FIFO is reset and the FIFOs are treated as empty.
 */
union cvmx_mio_uartx_far {
	uint64_t u64;
	struct cvmx_mio_uartx_far_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t far                          : 1;  /**< FIFO Access Register */
#else
	uint64_t far                          : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} s;
	struct cvmx_mio_uartx_far_s           cn30xx;
	struct cvmx_mio_uartx_far_s           cn31xx;
	struct cvmx_mio_uartx_far_s           cn38xx;
	struct cvmx_mio_uartx_far_s           cn38xxp2;
	struct cvmx_mio_uartx_far_s           cn50xx;
	struct cvmx_mio_uartx_far_s           cn52xx;
	struct cvmx_mio_uartx_far_s           cn52xxp1;
	struct cvmx_mio_uartx_far_s           cn56xx;
	struct cvmx_mio_uartx_far_s           cn56xxp1;
	struct cvmx_mio_uartx_far_s           cn58xx;
	struct cvmx_mio_uartx_far_s           cn58xxp1;
	struct cvmx_mio_uartx_far_s           cn61xx;
	struct cvmx_mio_uartx_far_s           cn63xx;
	struct cvmx_mio_uartx_far_s           cn63xxp1;
	struct cvmx_mio_uartx_far_s           cn66xx;
	struct cvmx_mio_uartx_far_s           cn68xx;
	struct cvmx_mio_uartx_far_s           cn68xxp1;
	struct cvmx_mio_uartx_far_s           cnf71xx;
};
typedef union cvmx_mio_uartx_far cvmx_mio_uartx_far_t;
typedef cvmx_mio_uartx_far_t cvmx_uart_far_t;

/**
 * cvmx_mio_uart#_fcr
 *
 * MIO_UARTX_FCR = MIO UARTX FIFO Control Register
 *
 * The FIFO Control Register (FCR) is a write-only register that controls the read and write data FIFO
 * operation. When FIFOs and Programmable THRE Interrupt mode are enabled, this register also controls
 * the THRE Interrupt empty threshold level.
 *
 * Setting bit 0 of the FCR enables the transmit and receive FIFOs. Whenever the value of this bit is
 * changed both the TX and RX FIFOs will be reset.
 *
 * Writing a '1' to bit 1 of the FCR resets and flushes data in the receive FIFO. Note that this bit is
 * self-clearing and it is not necessary to clear this bit.
 *
 * Writing a '1' to bit 2 of the FCR resets and flushes data in the transmit FIFO. Note that this bit is
 * self-clearing and it is not necessary to clear this bit.
 *
 * If the FIFOs and Programmable THRE Interrupt mode are enabled, bits 4 and 5 control the empty
 * threshold level at which THRE Interrupts are generated when the mode is active.  See the following
 * table for encodings:
 *
 * TX Trigger
 * ----------
 * 00 = empty FIFO
 * 01 = 2 chars in FIFO
 * 10 = FIFO 1/4 full
 * 11 = FIFO 1/2 full
 *
 * If the FIFO mode is enabled (bit 0 of the FCR is set to '1') bits 6 and 7 are active. Bit 6 and bit 7
 * set the trigger level in the receiver FIFO for the Enable Received Data Available Interrupt (ERBFI).
 * In auto flow control mode the trigger is used to determine when the rts_n signal will be deasserted.
 * See the following table for encodings:
 *
 * RX Trigger
 * ----------
 * 00 = 1 char in FIFO
 * 01 = FIFO 1/4 full
 * 10 = FIFO 1/2 full
 * 11 = FIFO 2 chars less than full
 *
 * Note: The address below is an alias to simplify these CSR descriptions. It should be known that the
 * IIR and FCR registers are the same.
 */
union cvmx_mio_uartx_fcr {
	uint64_t u64;
	struct cvmx_mio_uartx_fcr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t rxtrig                       : 2;  /**< RX Trigger */
	uint64_t txtrig                       : 2;  /**< TX Trigger */
	uint64_t reserved_3_3                 : 1;
	uint64_t txfr                         : 1;  /**< TX FIFO reset */
	uint64_t rxfr                         : 1;  /**< RX FIFO reset */
	uint64_t en                           : 1;  /**< FIFO enable */
#else
	uint64_t en                           : 1;
	uint64_t rxfr                         : 1;
	uint64_t txfr                         : 1;
	uint64_t reserved_3_3                 : 1;
	uint64_t txtrig                       : 2;
	uint64_t rxtrig                       : 2;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uartx_fcr_s           cn30xx;
	struct cvmx_mio_uartx_fcr_s           cn31xx;
	struct cvmx_mio_uartx_fcr_s           cn38xx;
	struct cvmx_mio_uartx_fcr_s           cn38xxp2;
	struct cvmx_mio_uartx_fcr_s           cn50xx;
	struct cvmx_mio_uartx_fcr_s           cn52xx;
	struct cvmx_mio_uartx_fcr_s           cn52xxp1;
	struct cvmx_mio_uartx_fcr_s           cn56xx;
	struct cvmx_mio_uartx_fcr_s           cn56xxp1;
	struct cvmx_mio_uartx_fcr_s           cn58xx;
	struct cvmx_mio_uartx_fcr_s           cn58xxp1;
	struct cvmx_mio_uartx_fcr_s           cn61xx;
	struct cvmx_mio_uartx_fcr_s           cn63xx;
	struct cvmx_mio_uartx_fcr_s           cn63xxp1;
	struct cvmx_mio_uartx_fcr_s           cn66xx;
	struct cvmx_mio_uartx_fcr_s           cn68xx;
	struct cvmx_mio_uartx_fcr_s           cn68xxp1;
	struct cvmx_mio_uartx_fcr_s           cnf71xx;
};
typedef union cvmx_mio_uartx_fcr cvmx_mio_uartx_fcr_t;
typedef cvmx_mio_uartx_fcr_t cvmx_uart_fcr_t;

/**
 * cvmx_mio_uart#_htx
 *
 * MIO_UARTX_HTX = MIO UARTX Halt TX Register
 *
 * The Halt TX Register (HTX) is used to halt transmissions for testing, so that the transmit FIFO can be
 * filled by software when FIFOs are enabled. If FIFOs are not enabled, setting the HTX register will
 * have no effect.
 */
union cvmx_mio_uartx_htx {
	uint64_t u64;
	struct cvmx_mio_uartx_htx_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t htx                          : 1;  /**< Halt TX */
#else
	uint64_t htx                          : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} s;
	struct cvmx_mio_uartx_htx_s           cn30xx;
	struct cvmx_mio_uartx_htx_s           cn31xx;
	struct cvmx_mio_uartx_htx_s           cn38xx;
	struct cvmx_mio_uartx_htx_s           cn38xxp2;
	struct cvmx_mio_uartx_htx_s           cn50xx;
	struct cvmx_mio_uartx_htx_s           cn52xx;
	struct cvmx_mio_uartx_htx_s           cn52xxp1;
	struct cvmx_mio_uartx_htx_s           cn56xx;
	struct cvmx_mio_uartx_htx_s           cn56xxp1;
	struct cvmx_mio_uartx_htx_s           cn58xx;
	struct cvmx_mio_uartx_htx_s           cn58xxp1;
	struct cvmx_mio_uartx_htx_s           cn61xx;
	struct cvmx_mio_uartx_htx_s           cn63xx;
	struct cvmx_mio_uartx_htx_s           cn63xxp1;
	struct cvmx_mio_uartx_htx_s           cn66xx;
	struct cvmx_mio_uartx_htx_s           cn68xx;
	struct cvmx_mio_uartx_htx_s           cn68xxp1;
	struct cvmx_mio_uartx_htx_s           cnf71xx;
};
typedef union cvmx_mio_uartx_htx cvmx_mio_uartx_htx_t;
typedef cvmx_mio_uartx_htx_t cvmx_uart_htx_t;

/**
 * cvmx_mio_uart#_ier
 *
 * MIO_UARTX_IER = MIO UARTX Interrupt Enable Register
 *
 * Interrupt Enable Register (IER) is a read/write register that contains four bits that enable
 * the generation of interrupts. These four bits are the Enable Received Data Available Interrupt
 * (ERBFI), the Enable Transmitter Holding Register Empty Interrupt (ETBEI), the Enable Receiver Line
 * Status Interrupt (ELSI), and the Enable Modem Status Interrupt (EDSSI).
 *
 * The IER also contains an enable bit (PTIME) for the Programmable THRE Interrupt mode.
 *
 * Note: The Divisor Latch Address Bit (DLAB) of the Line Control Register (LCR) must be clear to access
 * this register.
 *
 * Note: The address below is an alias to simplify these CSR descriptions. It should be known that the
 * IER and DLH registers are the same.
 */
union cvmx_mio_uartx_ier {
	uint64_t u64;
	struct cvmx_mio_uartx_ier_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t ptime                        : 1;  /**< Programmable THRE Interrupt mode enable */
	uint64_t reserved_4_6                 : 3;
	uint64_t edssi                        : 1;  /**< Enable Modem Status Interrupt */
	uint64_t elsi                         : 1;  /**< Enable Receiver Line Status Interrupt */
	uint64_t etbei                        : 1;  /**< Enable Transmitter Holding Register Empty Interrupt */
	uint64_t erbfi                        : 1;  /**< Enable Received Data Available Interrupt */
#else
	uint64_t erbfi                        : 1;
	uint64_t etbei                        : 1;
	uint64_t elsi                         : 1;
	uint64_t edssi                        : 1;
	uint64_t reserved_4_6                 : 3;
	uint64_t ptime                        : 1;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uartx_ier_s           cn30xx;
	struct cvmx_mio_uartx_ier_s           cn31xx;
	struct cvmx_mio_uartx_ier_s           cn38xx;
	struct cvmx_mio_uartx_ier_s           cn38xxp2;
	struct cvmx_mio_uartx_ier_s           cn50xx;
	struct cvmx_mio_uartx_ier_s           cn52xx;
	struct cvmx_mio_uartx_ier_s           cn52xxp1;
	struct cvmx_mio_uartx_ier_s           cn56xx;
	struct cvmx_mio_uartx_ier_s           cn56xxp1;
	struct cvmx_mio_uartx_ier_s           cn58xx;
	struct cvmx_mio_uartx_ier_s           cn58xxp1;
	struct cvmx_mio_uartx_ier_s           cn61xx;
	struct cvmx_mio_uartx_ier_s           cn63xx;
	struct cvmx_mio_uartx_ier_s           cn63xxp1;
	struct cvmx_mio_uartx_ier_s           cn66xx;
	struct cvmx_mio_uartx_ier_s           cn68xx;
	struct cvmx_mio_uartx_ier_s           cn68xxp1;
	struct cvmx_mio_uartx_ier_s           cnf71xx;
};
typedef union cvmx_mio_uartx_ier cvmx_mio_uartx_ier_t;
typedef cvmx_mio_uartx_ier_t cvmx_uart_ier_t;

/**
 * cvmx_mio_uart#_iir
 *
 * MIO_UARTX_IIR = MIO UARTX Interrupt Identity Register
 *
 * The Interrupt Identity Register (IIR) is a read-only register that identifies the source of an
 * interrupt. The upper two bits of the register are FIFO-enabled bits. These bits are '00' if the FIFOs
 * are disabled, and '11' if they are enabled. The lower four bits identify the highest priority pending
 * interrupt. The following table defines interrupt source decoding, interrupt priority, and interrupt
 * reset control:
 *
 * Interrupt   Priority   Interrupt         Interrupt                                       Interrupt
 * ID          Level      Type              Source                                          Reset By
 * ---------------------------------------------------------------------------------------------------------------------------------
 * 0001        -          None              None                                            -
 *
 * 0110        Highest    Receiver Line     Overrun, parity, or framing errors or break     Reading the Line Status Register
 *                        Status            interrupt
 *
 * 0100        Second     Received Data     Receiver data available (FIFOs disabled) or     Reading the Receiver Buffer Register
 *                        Available         RX FIFO trigger level reached (FIFOs            (FIFOs disabled) or the FIFO drops below
 *                                          enabled)                                        the trigger level (FIFOs enabled)
 *
 * 1100        Second     Character         No characters in or out of the RX FIFO          Reading the Receiver Buffer Register
 *                        Timeout           during the last 4 character times and there
 *                        Indication        is at least 1 character in it during this
 *                                          time
 *
 * 0010        Third      Transmitter       Transmitter Holding Register Empty              Reading the Interrupt Identity Register
 *                        Holding           (Programmable THRE Mode disabled) or TX         (if source of interrupt) or writing into
 *                        Register          FIFO at or below threshold (Programmable        THR (FIFOs or THRE Mode disabled) or TX
 *                        Empty             THRE Mode enabled)                              FIFO above threshold (FIFOs and THRE
 *                                                                                          Mode enabled)
 *
 * 0000        Fourth     Modem Status      Clear To Send (CTS) or Data Set Ready (DSR)     Reading the Modem Status Register
 *                        Changed           or Ring Indicator (RI) or Data Carrier
 *                                          Detect (DCD) changed (note: if auto flow
 *                                          control mode is enabled, a change in CTS
 *                                          will not cause an interrupt)
 *
 * 0111        Fifth      Busy Detect       Software has tried to write to the Line         Reading the UART Status Register
 *                        Indication        Control Register while the BUSY bit of the
 *                                          UART Status Register was set
 *
 * Note: The Busy Detect Indication interrupt has been removed from PASS3 and will never assert.
 *
 * Note: The address below is an alias to simplify these CSR descriptions. It should be known that the
 * IIR and FCR registers are the same.
 */
union cvmx_mio_uartx_iir {
	uint64_t u64;
	struct cvmx_mio_uartx_iir_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t fen                          : 2;  /**< FIFO-enabled bits */
	uint64_t reserved_4_5                 : 2;
	cvmx_uart_iid_t iid                   : 4;  /**< Interrupt ID */
#else
	cvmx_uart_iid_t iid                   : 4;
	uint64_t reserved_4_5                 : 2;
	uint64_t fen                          : 2;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uartx_iir_s           cn30xx;
	struct cvmx_mio_uartx_iir_s           cn31xx;
	struct cvmx_mio_uartx_iir_s           cn38xx;
	struct cvmx_mio_uartx_iir_s           cn38xxp2;
	struct cvmx_mio_uartx_iir_s           cn50xx;
	struct cvmx_mio_uartx_iir_s           cn52xx;
	struct cvmx_mio_uartx_iir_s           cn52xxp1;
	struct cvmx_mio_uartx_iir_s           cn56xx;
	struct cvmx_mio_uartx_iir_s           cn56xxp1;
	struct cvmx_mio_uartx_iir_s           cn58xx;
	struct cvmx_mio_uartx_iir_s           cn58xxp1;
	struct cvmx_mio_uartx_iir_s           cn61xx;
	struct cvmx_mio_uartx_iir_s           cn63xx;
	struct cvmx_mio_uartx_iir_s           cn63xxp1;
	struct cvmx_mio_uartx_iir_s           cn66xx;
	struct cvmx_mio_uartx_iir_s           cn68xx;
	struct cvmx_mio_uartx_iir_s           cn68xxp1;
	struct cvmx_mio_uartx_iir_s           cnf71xx;
};
typedef union cvmx_mio_uartx_iir cvmx_mio_uartx_iir_t;
typedef cvmx_mio_uartx_iir_t cvmx_uart_iir_t;

/**
 * cvmx_mio_uart#_lcr
 *
 * MIO_UARTX_LCR = MIO UARTX Line Control Register
 *
 * The Line Control Register (LCR) controls the format of the data that is transmitted and received by
 * the UART.
 *
 * LCR bits 0 and 1 are the Character Length Select field. This field is used to select the number of
 * data bits per character that are transmitted and received. See the following table for encodings:
 *
 * CLS
 * ---
 * 00 = 5 bits (bits 0-4 sent)
 * 01 = 6 bits (bits 0-5 sent)
 * 10 = 7 bits (bits 0-6 sent)
 * 11 = 8 bits (all bits sent)
 *
 * LCR bit 2 controls the number of stop bits transmitted. If bit 2 is a '0', one stop bit is transmitted
 * in the serial data. If bit 2 is a '1' and the data bits are set to '00', one and a half stop bits are
 * generated. Otherwise, two stop bits are generated and transmitted in the serial data out. Note that
 * regardless of the number of stop bits selected the receiver will only check the first stop bit.
 *
 * LCR bit 3 is the Parity Enable bit. This bit is used to enable and disable parity generation and
 * detection in transmitted and received serial character respectively.
 *
 * LCR bit 4 is the Even Parity Select bit. If parity is enabled, bit 4 selects between even and odd
 * parity. If bit 4 is a '1', an even number of ones is transmitted or checked. If bit 4 is a '0', an odd
 * number of ones is transmitted or checked.
 *
 * LCR bit 6 is the Break Control bit. Setting the Break bit sends a break signal by holding the sout
 * line low (when not in Loopback mode, as determined by Modem Control Register bit 4). When in Loopback
 * mode, the break condition is internally looped back to the receiver.
 *
 * LCR bit 7 is the Divisor Latch Address bit. Setting this bit enables reading and writing of the
 * Divisor Latch register (DLL and DLH) to set the baud rate of the UART. This bit must be cleared after
 * initial baud rate setup in order to access other registers.
 *
 * Note: The LCR is writeable only when the UART is not busy (when the BUSY bit (bit 0) of the UART
 * Status Register (USR) is clear). The LCR is always readable. In PASS3, the LCR is always writable
 * because the BUSY bit is always clear.
 */
union cvmx_mio_uartx_lcr {
	uint64_t u64;
	struct cvmx_mio_uartx_lcr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t dlab                         : 1;  /**< Divisor Latch Address bit */
	uint64_t brk                          : 1;  /**< Break Control bit */
	uint64_t reserved_5_5                 : 1;
	uint64_t eps                          : 1;  /**< Even Parity Select bit */
	uint64_t pen                          : 1;  /**< Parity Enable bit */
	uint64_t stop                         : 1;  /**< Stop Control bit */
	cvmx_uart_bits_t cls                  : 2;  /**< Character Length Select */
#else
	cvmx_uart_bits_t cls                  : 2;
	uint64_t stop                         : 1;
	uint64_t pen                          : 1;
	uint64_t eps                          : 1;
	uint64_t reserved_5_5                 : 1;
	uint64_t brk                          : 1;
	uint64_t dlab                         : 1;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uartx_lcr_s           cn30xx;
	struct cvmx_mio_uartx_lcr_s           cn31xx;
	struct cvmx_mio_uartx_lcr_s           cn38xx;
	struct cvmx_mio_uartx_lcr_s           cn38xxp2;
	struct cvmx_mio_uartx_lcr_s           cn50xx;
	struct cvmx_mio_uartx_lcr_s           cn52xx;
	struct cvmx_mio_uartx_lcr_s           cn52xxp1;
	struct cvmx_mio_uartx_lcr_s           cn56xx;
	struct cvmx_mio_uartx_lcr_s           cn56xxp1;
	struct cvmx_mio_uartx_lcr_s           cn58xx;
	struct cvmx_mio_uartx_lcr_s           cn58xxp1;
	struct cvmx_mio_uartx_lcr_s           cn61xx;
	struct cvmx_mio_uartx_lcr_s           cn63xx;
	struct cvmx_mio_uartx_lcr_s           cn63xxp1;
	struct cvmx_mio_uartx_lcr_s           cn66xx;
	struct cvmx_mio_uartx_lcr_s           cn68xx;
	struct cvmx_mio_uartx_lcr_s           cn68xxp1;
	struct cvmx_mio_uartx_lcr_s           cnf71xx;
};
typedef union cvmx_mio_uartx_lcr cvmx_mio_uartx_lcr_t;
typedef cvmx_mio_uartx_lcr_t cvmx_uart_lcr_t;

/**
 * cvmx_mio_uart#_lsr
 *
 * MIO_UARTX_LSR = MIO UARTX Line Status Register
 *
 * The Line Status Register (LSR) contains status of the receiver and transmitter data transfers. This
 * status can be read by the user at anytime.
 *
 * LSR bit 0 is the Data Ready (DR) bit. When set, this bit indicates the receiver contains at least one
 * character in the RBR or the receiver FIFO. This bit is cleared when the RBR is read in the non-FIFO
 * mode, or when the receiver FIFO is empty, in FIFO mode.
 *
 * LSR bit 1 is the Overrun Error (OE) bit. When set, this bit indicates an overrun error has occurred
 * because a new data character was received before the previous data was read. In the non-FIFO mode, the
 * OE bit is set when a new character arrives in the receiver before the previous character was read from
 * the RBR. When this happens, the data in the RBR is overwritten. In the FIFO mode, an overrun error
 * occurs when the FIFO is full and a new character arrives at the receiver. The data in the FIFO is
 * retained and the data in the receive shift register is lost.
 *
 * LSR bit 2 is the Parity Error (PE) bit. This bit is set whenever there is a parity error in the
 * receiver if the Parity Enable (PEN) bit in the LCR is set. In the FIFO mode, since the parity error is
 * associated with a character received, it is revealed when the character with the parity error arrives
 * at the top of the FIFO. It should be noted that the Parity Error (PE) bit will be set if a break
 * interrupt has occurred, as indicated by the Break Interrupt (BI) bit.
 *
 * LSR bit 3 is the Framing Error (FE) bit. This bit is set whenever there is a framing error in the
 * receiver. A framing error occurs when the receiver does not detect a valid STOP bit in the received
 * data. In the FIFO mode, since the framing error is associated with a character received, it is
 * revealed when the character with the framing error is at the top of the FIFO. When a framing error
 * occurs the UART will try resynchronize. It does this by assuming that the error was due to the start
 * bit of the next character and then continues receiving the other bits (i.e. data and/or parity and
 * stop). It should be noted that the Framing Error (FE) bit will be set if a break interrupt has
 * occurred, as indicated by the Break Interrupt (BI) bit.
 *
 * Note: The OE, PE, and FE bits are reset when a read of the LSR is performed.
 *
 * LSR bit 4 is the Break Interrupt (BI) bit. This bit is set whenever the serial input (sin) is held in
 * a 0 state for longer than the sum of start time + data bits + parity + stop bits. A break condition on
 * sin causes one and only one character, consisting of all zeros, to be received by the UART. In the
 * FIFO mode, the character associated with the break condition is carried through the FIFO and is
 * revealed when the character is at the top of the FIFO. Reading the LSR clears the BI bit. In the non-
 * FIFO mode, the BI indication occurs immediately and persists until the LSR is read.
 *
 * LSR bit 5 is the Transmitter Holding Register Empty (THRE) bit. When Programmable THRE Interrupt mode
 * is disabled, this bit indicates that the UART can accept a new character for transmission. This bit is
 * set whenever data is transferred from the THR (or TX FIFO) to the transmitter shift register and no
 * new data has been written to the THR (or TX FIFO). This also causes a THRE Interrupt to occur, if the
 * THRE Interrupt is enabled. When FIFOs and Programmable THRE Interrupt mode are enabled, LSR bit 5
 * functionality is switched to indicate the transmitter FIFO is full, and no longer controls THRE
 * Interrupts, which are then controlled by the FCR[5:4] threshold setting.
 *
 * LSR bit 6 is the Transmitter Empty (TEMT) bit. In the FIFO mode, this bit is set whenever the
 * Transmitter Shift Register and the FIFO are both empty. In the non-FIFO mode, this bit is set whenever
 * the Transmitter Holding Register and the Transmitter Shift Register are both empty. This bit is
 * typically used to make sure it is safe to change control registers. Changing control registers while
 * the transmitter is busy can result in corrupt data being transmitted.
 *
 * LSR bit 7 is the Error in Receiver FIFO (FERR) bit. This bit is active only when FIFOs are enabled. It
 * is set when there is at least one parity error, framing error, or break indication in the FIFO. This
 * bit is cleared when the LSR is read and the character with the error is at the top of the receiver
 * FIFO and there are no subsequent errors in the FIFO.
 */
union cvmx_mio_uartx_lsr {
	uint64_t u64;
	struct cvmx_mio_uartx_lsr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t ferr                         : 1;  /**< Error in Receiver FIFO bit */
	uint64_t temt                         : 1;  /**< Transmitter Empty bit */
	uint64_t thre                         : 1;  /**< Transmitter Holding Register Empty bit */
	uint64_t bi                           : 1;  /**< Break Interrupt bit */
	uint64_t fe                           : 1;  /**< Framing Error bit */
	uint64_t pe                           : 1;  /**< Parity Error bit */
	uint64_t oe                           : 1;  /**< Overrun Error bit */
	uint64_t dr                           : 1;  /**< Data Ready bit */
#else
	uint64_t dr                           : 1;
	uint64_t oe                           : 1;
	uint64_t pe                           : 1;
	uint64_t fe                           : 1;
	uint64_t bi                           : 1;
	uint64_t thre                         : 1;
	uint64_t temt                         : 1;
	uint64_t ferr                         : 1;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uartx_lsr_s           cn30xx;
	struct cvmx_mio_uartx_lsr_s           cn31xx;
	struct cvmx_mio_uartx_lsr_s           cn38xx;
	struct cvmx_mio_uartx_lsr_s           cn38xxp2;
	struct cvmx_mio_uartx_lsr_s           cn50xx;
	struct cvmx_mio_uartx_lsr_s           cn52xx;
	struct cvmx_mio_uartx_lsr_s           cn52xxp1;
	struct cvmx_mio_uartx_lsr_s           cn56xx;
	struct cvmx_mio_uartx_lsr_s           cn56xxp1;
	struct cvmx_mio_uartx_lsr_s           cn58xx;
	struct cvmx_mio_uartx_lsr_s           cn58xxp1;
	struct cvmx_mio_uartx_lsr_s           cn61xx;
	struct cvmx_mio_uartx_lsr_s           cn63xx;
	struct cvmx_mio_uartx_lsr_s           cn63xxp1;
	struct cvmx_mio_uartx_lsr_s           cn66xx;
	struct cvmx_mio_uartx_lsr_s           cn68xx;
	struct cvmx_mio_uartx_lsr_s           cn68xxp1;
	struct cvmx_mio_uartx_lsr_s           cnf71xx;
};
typedef union cvmx_mio_uartx_lsr cvmx_mio_uartx_lsr_t;
typedef cvmx_mio_uartx_lsr_t cvmx_uart_lsr_t;

/**
 * cvmx_mio_uart#_mcr
 *
 * MIO_UARTX_MCR = MIO UARTX Modem Control Register
 *
 * The lower four bits of the Modem Control Register (MCR) directly manipulate the outputs of the UART.
 * The DTR (bit 0), RTS (bit 1), OUT1 (bit 2), and OUT2 (bit 3) bits are inverted and then drive the
 * corresponding UART outputs, dtr_n, rts_n, out1_n, and out2_n.  In loopback mode, these outputs are
 * driven inactive high while the values in these locations are internally looped back to the inputs.
 *
 * Note: When Auto RTS is enabled, the rts_n output is controlled in the same way, but is also gated
 * with the receiver FIFO threshold trigger (rts_n is inactive high when above the threshold). The
 * rts_n output will be de-asserted whenever RTS (bit 1) is set low.
 *
 * Note: The UART0 out1_n and out2_n outputs are not present on the pins of the chip, but the UART0 OUT1
 * and OUT2 bits still function in Loopback mode.  The UART1 dtr_n, out1_n, and out2_n outputs are not
 * present on the pins of the chip, but the UART1 DTR, OUT1, and OUT2 bits still function in Loopback
 * mode.
 *
 * MCR bit 4 is the Loopback bit. When set, data on the sout line is held high, while serial data output
 * is looped back to the sin line, internally. In this mode all the interrupts are fully functional. This
 * feature is used for diagnostic purposes. Also, in loopback mode, the modem control inputs (dsr_n,
 * cts_n, ri_n, dcd_n) are disconnected and the four modem control outputs (dtr_n, rts_n, out1_n, out1_n)
 * are looped back to the inputs, internally.
 *
 * MCR bit 5 is the Auto Flow Control Enable (AFCE) bit. When FIFOs are enabled and this bit is set,
 * 16750-compatible Auto RTS and Auto CTS serial data flow control features are enabled.
 *
 * Auto RTS becomes active when the following occurs:
 * 1. MCR bit 1 is set
 * 2. FIFOs are enabled by setting FIFO Control Register (FCR) bit 0
 * 3. MCR bit 5 is set (must be set after FCR bit 0)
 *
 * When active, the rts_n output is forced inactive-high when the receiver FIFO level reaches the
 * threshold set by FCR[7:6]. When rts_n is connected to the cts_n input of another UART device, the
 * other UART stops sending serial data until the receiver FIFO has available space.
 *
 * The selectable receiver FIFO threshold values are: 1, 1/4, 1/2, and 2 less than full. Since one
 * additional character may be transmitted to the UART after rts_n has become inactive (due to data
 * already having entered the transmitter block in the other UART), setting the threshold to 2 less
 * than full allows maximum use of the FIFO with a safety zone of one character.
 *
 * Once the receiver FIFO becomes completely empty by reading the Receiver Buffer Register (RBR), rts_n
 * again becomes active-low, signalling the other UART to continue sending data. It is important to note
 * that, even if everything else is set to Enabled and the correct MCR bits are set, if the FIFOs are
 * disabled through FCR[0], Auto Flow Control is also disabled. When Auto RTS is disabled or inactive,
 * rts_n is controlled solely by MCR[1].
 *
 * Auto CTS becomes active when the following occurs:
 * 1. FIFOs are enabled by setting FIFO Control Register (FCR) bit 0
 * 2. MCR bit 5 is set (must be set after FCR bit 0)
 *
 * When active, the UART transmitter is disabled whenever the cts_n input becomes inactive-high. This
 * prevents overflowing the FIFO of the receiving UART.
 *
 * Note that, if the cts_n input is not inactivated before the middle of the last stop bit, another
 * character is transmitted before the transmitter is disabled. While the transmitter is disabled, the
 * transmitter FIFO can still be written to, and even overflowed. Therefore, when using this mode, either
 * the true FIFO depth (64 characters) must be known to software, or the Programmable THRE Interrupt mode
 * must be enabled to access the FIFO full status through the Line Status Register. When using the FIFO
 * full status, software can poll this before each write to the Transmitter FIFO.
 *
 * Note: FIFO full status is also available in the UART Status Register (USR) or the actual level of the
 * FIFO may be read through the Transmit FIFO Level (TFL) register.
 *
 * When the cts_n input becomes active-low again, transmission resumes. It is important to note that,
 * even if everything else is set to Enabled, Auto Flow Control is also disabled if the FIFOs are
 * disabled through FCR[0]. When Auto CTS is disabled or inactive, the transmitter is unaffected by
 * cts_n.
 */
union cvmx_mio_uartx_mcr {
	uint64_t u64;
	struct cvmx_mio_uartx_mcr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_6_63                : 58;
	uint64_t afce                         : 1;  /**< Auto Flow Control Enable bit */
	uint64_t loop                         : 1;  /**< Loopback bit */
	uint64_t out2                         : 1;  /**< OUT2 output bit */
	uint64_t out1                         : 1;  /**< OUT1 output bit */
	uint64_t rts                          : 1;  /**< Request To Send output bit */
	uint64_t dtr                          : 1;  /**< Data Terminal Ready output bit */
#else
	uint64_t dtr                          : 1;
	uint64_t rts                          : 1;
	uint64_t out1                         : 1;
	uint64_t out2                         : 1;
	uint64_t loop                         : 1;
	uint64_t afce                         : 1;
	uint64_t reserved_6_63                : 58;
#endif
	} s;
	struct cvmx_mio_uartx_mcr_s           cn30xx;
	struct cvmx_mio_uartx_mcr_s           cn31xx;
	struct cvmx_mio_uartx_mcr_s           cn38xx;
	struct cvmx_mio_uartx_mcr_s           cn38xxp2;
	struct cvmx_mio_uartx_mcr_s           cn50xx;
	struct cvmx_mio_uartx_mcr_s           cn52xx;
	struct cvmx_mio_uartx_mcr_s           cn52xxp1;
	struct cvmx_mio_uartx_mcr_s           cn56xx;
	struct cvmx_mio_uartx_mcr_s           cn56xxp1;
	struct cvmx_mio_uartx_mcr_s           cn58xx;
	struct cvmx_mio_uartx_mcr_s           cn58xxp1;
	struct cvmx_mio_uartx_mcr_s           cn61xx;
	struct cvmx_mio_uartx_mcr_s           cn63xx;
	struct cvmx_mio_uartx_mcr_s           cn63xxp1;
	struct cvmx_mio_uartx_mcr_s           cn66xx;
	struct cvmx_mio_uartx_mcr_s           cn68xx;
	struct cvmx_mio_uartx_mcr_s           cn68xxp1;
	struct cvmx_mio_uartx_mcr_s           cnf71xx;
};
typedef union cvmx_mio_uartx_mcr cvmx_mio_uartx_mcr_t;
typedef cvmx_mio_uartx_mcr_t cvmx_uart_mcr_t;

/**
 * cvmx_mio_uart#_msr
 *
 * MIO_UARTX_MSR = MIO UARTX Modem Status Register
 *
 * The Modem Status Register (MSR) contains the current status of the modem control input lines and if
 * they changed.
 *
 * DCTS (bit 0), DDSR (bit 1), and DDCD (bit 3) bits record whether the modem control lines (cts_n,
 * dsr_n, and dcd_n) have changed since the last time the user read the MSR. TERI (bit 2) indicates ri_n
 * has changed from an active-low, to an inactive-high state since the last time the MSR was read. In
 * Loopback mode, DCTS reflects changes on MCR bit 1 (RTS), DDSR reflects changes on MCR bit 0 (DTR), and
 * DDCD reflects changes on MCR bit 3 (Out2), while TERI reflects when MCR bit 2 (Out1) has changed state
 * from a high to a low.
 *
 * Note: if the DCTS bit is not set and the cts_n signal is asserted (low) and a reset occurs (software
 * or otherwise), then the DCTS bit will get set when the reset is removed if the cts_n signal remains
 * asserted.
 *
 * The CTS, DSR, RI, and DCD Modem Status bits contain information on the current state of the modem
 * control lines. CTS (bit 4) is the compliment of cts_n, DSR (bit 5) is the compliment of dsr_n, RI
 * (bit 6) is the compliment of ri_n, and DCD (bit 7) is the compliment of dcd_n. In Loopback mode, CTS
 * is the same as MCR bit 1 (RTS), DSR is the same as MCR bit 0 (DTR), RI is the same as MCR bit 2
 * (Out1), and DCD is the same as MCR bit 3 (Out2).
 *
 * Note: The UART0 dsr_n and ri_n inputs are internally tied to power and not present on the pins of chip.
 * Thus the UART0 DSR and RI bits will be '0' when not in Loopback mode.  The UART1 dsr_n, ri_n, and dcd_n
 * inputs are internally tied to power and not present on the pins of chip. Thus the UART1 DSR, RI, and
 * DCD bits will be '0' when not in Loopback mode.
 */
union cvmx_mio_uartx_msr {
	uint64_t u64;
	struct cvmx_mio_uartx_msr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t dcd                          : 1;  /**< Data Carrier Detect input bit */
	uint64_t ri                           : 1;  /**< Ring Indicator input bit */
	uint64_t dsr                          : 1;  /**< Data Set Ready input bit */
	uint64_t cts                          : 1;  /**< Clear To Send input bit */
	uint64_t ddcd                         : 1;  /**< Delta Data Carrier Detect bit */
	uint64_t teri                         : 1;  /**< Trailing Edge of Ring Indicator bit */
	uint64_t ddsr                         : 1;  /**< Delta Data Set Ready bit */
	uint64_t dcts                         : 1;  /**< Delta Clear To Send bit */
#else
	uint64_t dcts                         : 1;
	uint64_t ddsr                         : 1;
	uint64_t teri                         : 1;
	uint64_t ddcd                         : 1;
	uint64_t cts                          : 1;
	uint64_t dsr                          : 1;
	uint64_t ri                           : 1;
	uint64_t dcd                          : 1;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uartx_msr_s           cn30xx;
	struct cvmx_mio_uartx_msr_s           cn31xx;
	struct cvmx_mio_uartx_msr_s           cn38xx;
	struct cvmx_mio_uartx_msr_s           cn38xxp2;
	struct cvmx_mio_uartx_msr_s           cn50xx;
	struct cvmx_mio_uartx_msr_s           cn52xx;
	struct cvmx_mio_uartx_msr_s           cn52xxp1;
	struct cvmx_mio_uartx_msr_s           cn56xx;
	struct cvmx_mio_uartx_msr_s           cn56xxp1;
	struct cvmx_mio_uartx_msr_s           cn58xx;
	struct cvmx_mio_uartx_msr_s           cn58xxp1;
	struct cvmx_mio_uartx_msr_s           cn61xx;
	struct cvmx_mio_uartx_msr_s           cn63xx;
	struct cvmx_mio_uartx_msr_s           cn63xxp1;
	struct cvmx_mio_uartx_msr_s           cn66xx;
	struct cvmx_mio_uartx_msr_s           cn68xx;
	struct cvmx_mio_uartx_msr_s           cn68xxp1;
	struct cvmx_mio_uartx_msr_s           cnf71xx;
};
typedef union cvmx_mio_uartx_msr cvmx_mio_uartx_msr_t;
typedef cvmx_mio_uartx_msr_t cvmx_uart_msr_t;

/**
 * cvmx_mio_uart#_rbr
 *
 * MIO_UARTX_RBR = MIO UARTX Receive Buffer Register
 *
 * The Receive Buffer Register (RBR) is a read-only register that contains the data byte received on the
 * serial input port (sin). The data in this register is valid only if the Data Ready (DR) bit in the
 * Line status Register (LSR) is set. When the FIFOs are programmed OFF, the data in the RBR must be
 * read before the next data arrives, otherwise it is overwritten, resulting in an overrun error. When
 * the FIFOs are programmed ON, this register accesses the head of the receive FIFO. If the receive FIFO
 * is full (64 characters) and this register is not read before the next data character arrives, then the
 * data already in the FIFO is preserved, but any incoming data is lost. An overrun error also occurs.
 *
 * Note: The Divisor Latch Address Bit (DLAB) of the Line Control Register (LCR) must be clear to access
 * this register.
 *
 * Note: The address below is an alias to simplify these CSR descriptions. It should be known that the
 * RBR, THR, and DLL registers are the same.
 */
union cvmx_mio_uartx_rbr {
	uint64_t u64;
	struct cvmx_mio_uartx_rbr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t rbr                          : 8;  /**< Receive Buffer Register */
#else
	uint64_t rbr                          : 8;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uartx_rbr_s           cn30xx;
	struct cvmx_mio_uartx_rbr_s           cn31xx;
	struct cvmx_mio_uartx_rbr_s           cn38xx;
	struct cvmx_mio_uartx_rbr_s           cn38xxp2;
	struct cvmx_mio_uartx_rbr_s           cn50xx;
	struct cvmx_mio_uartx_rbr_s           cn52xx;
	struct cvmx_mio_uartx_rbr_s           cn52xxp1;
	struct cvmx_mio_uartx_rbr_s           cn56xx;
	struct cvmx_mio_uartx_rbr_s           cn56xxp1;
	struct cvmx_mio_uartx_rbr_s           cn58xx;
	struct cvmx_mio_uartx_rbr_s           cn58xxp1;
	struct cvmx_mio_uartx_rbr_s           cn61xx;
	struct cvmx_mio_uartx_rbr_s           cn63xx;
	struct cvmx_mio_uartx_rbr_s           cn63xxp1;
	struct cvmx_mio_uartx_rbr_s           cn66xx;
	struct cvmx_mio_uartx_rbr_s           cn68xx;
	struct cvmx_mio_uartx_rbr_s           cn68xxp1;
	struct cvmx_mio_uartx_rbr_s           cnf71xx;
};
typedef union cvmx_mio_uartx_rbr cvmx_mio_uartx_rbr_t;
typedef cvmx_mio_uartx_rbr_t cvmx_uart_rbr_t;

/**
 * cvmx_mio_uart#_rfl
 *
 * MIO_UARTX_RFL = MIO UARTX Receive FIFO Level Register
 *
 * The Receive FIFO Level Register (RFL) indicates the number of data entries in the receive FIFO.
 */
union cvmx_mio_uartx_rfl {
	uint64_t u64;
	struct cvmx_mio_uartx_rfl_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_7_63                : 57;
	uint64_t rfl                          : 7;  /**< Receive FIFO Level Register */
#else
	uint64_t rfl                          : 7;
	uint64_t reserved_7_63                : 57;
#endif
	} s;
	struct cvmx_mio_uartx_rfl_s           cn30xx;
	struct cvmx_mio_uartx_rfl_s           cn31xx;
	struct cvmx_mio_uartx_rfl_s           cn38xx;
	struct cvmx_mio_uartx_rfl_s           cn38xxp2;
	struct cvmx_mio_uartx_rfl_s           cn50xx;
	struct cvmx_mio_uartx_rfl_s           cn52xx;
	struct cvmx_mio_uartx_rfl_s           cn52xxp1;
	struct cvmx_mio_uartx_rfl_s           cn56xx;
	struct cvmx_mio_uartx_rfl_s           cn56xxp1;
	struct cvmx_mio_uartx_rfl_s           cn58xx;
	struct cvmx_mio_uartx_rfl_s           cn58xxp1;
	struct cvmx_mio_uartx_rfl_s           cn61xx;
	struct cvmx_mio_uartx_rfl_s           cn63xx;
	struct cvmx_mio_uartx_rfl_s           cn63xxp1;
	struct cvmx_mio_uartx_rfl_s           cn66xx;
	struct cvmx_mio_uartx_rfl_s           cn68xx;
	struct cvmx_mio_uartx_rfl_s           cn68xxp1;
	struct cvmx_mio_uartx_rfl_s           cnf71xx;
};
typedef union cvmx_mio_uartx_rfl cvmx_mio_uartx_rfl_t;
typedef cvmx_mio_uartx_rfl_t cvmx_uart_rfl_t;

/**
 * cvmx_mio_uart#_rfw
 *
 * MIO_UARTX_RFW = MIO UARTX Receive FIFO Write Register
 *
 * The Receive FIFO Write Register (RFW) is only valid when FIFO access mode is enabled (FAR bit 0 is
 * set). When FIFOs are enabled, this register is used to write data to the receive FIFO. Each
 * consecutive write pushes the new data to the next write location in the receive FIFO. When FIFOs are
 * not enabled, this register is used to write data to the RBR.
 */
union cvmx_mio_uartx_rfw {
	uint64_t u64;
	struct cvmx_mio_uartx_rfw_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_10_63               : 54;
	uint64_t rffe                         : 1;  /**< Receive FIFO Framing Error */
	uint64_t rfpe                         : 1;  /**< Receive FIFO Parity Error */
	uint64_t rfwd                         : 8;  /**< Receive FIFO Write Data */
#else
	uint64_t rfwd                         : 8;
	uint64_t rfpe                         : 1;
	uint64_t rffe                         : 1;
	uint64_t reserved_10_63               : 54;
#endif
	} s;
	struct cvmx_mio_uartx_rfw_s           cn30xx;
	struct cvmx_mio_uartx_rfw_s           cn31xx;
	struct cvmx_mio_uartx_rfw_s           cn38xx;
	struct cvmx_mio_uartx_rfw_s           cn38xxp2;
	struct cvmx_mio_uartx_rfw_s           cn50xx;
	struct cvmx_mio_uartx_rfw_s           cn52xx;
	struct cvmx_mio_uartx_rfw_s           cn52xxp1;
	struct cvmx_mio_uartx_rfw_s           cn56xx;
	struct cvmx_mio_uartx_rfw_s           cn56xxp1;
	struct cvmx_mio_uartx_rfw_s           cn58xx;
	struct cvmx_mio_uartx_rfw_s           cn58xxp1;
	struct cvmx_mio_uartx_rfw_s           cn61xx;
	struct cvmx_mio_uartx_rfw_s           cn63xx;
	struct cvmx_mio_uartx_rfw_s           cn63xxp1;
	struct cvmx_mio_uartx_rfw_s           cn66xx;
	struct cvmx_mio_uartx_rfw_s           cn68xx;
	struct cvmx_mio_uartx_rfw_s           cn68xxp1;
	struct cvmx_mio_uartx_rfw_s           cnf71xx;
};
typedef union cvmx_mio_uartx_rfw cvmx_mio_uartx_rfw_t;
typedef cvmx_mio_uartx_rfw_t cvmx_uart_rfw_t;

/**
 * cvmx_mio_uart#_sbcr
 *
 * MIO_UARTX_SBCR = MIO UARTX Shadow Break Control Register
 *
 * The Shadow Break Control Register (SBCR) is a shadow register for the BREAK bit (LCR bit 6) that can
 * be used to remove the burden of having to perform a read-modify-write on the LCR.
 */
union cvmx_mio_uartx_sbcr {
	uint64_t u64;
	struct cvmx_mio_uartx_sbcr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t sbcr                         : 1;  /**< Shadow Break Control */
#else
	uint64_t sbcr                         : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} s;
	struct cvmx_mio_uartx_sbcr_s          cn30xx;
	struct cvmx_mio_uartx_sbcr_s          cn31xx;
	struct cvmx_mio_uartx_sbcr_s          cn38xx;
	struct cvmx_mio_uartx_sbcr_s          cn38xxp2;
	struct cvmx_mio_uartx_sbcr_s          cn50xx;
	struct cvmx_mio_uartx_sbcr_s          cn52xx;
	struct cvmx_mio_uartx_sbcr_s          cn52xxp1;
	struct cvmx_mio_uartx_sbcr_s          cn56xx;
	struct cvmx_mio_uartx_sbcr_s          cn56xxp1;
	struct cvmx_mio_uartx_sbcr_s          cn58xx;
	struct cvmx_mio_uartx_sbcr_s          cn58xxp1;
	struct cvmx_mio_uartx_sbcr_s          cn61xx;
	struct cvmx_mio_uartx_sbcr_s          cn63xx;
	struct cvmx_mio_uartx_sbcr_s          cn63xxp1;
	struct cvmx_mio_uartx_sbcr_s          cn66xx;
	struct cvmx_mio_uartx_sbcr_s          cn68xx;
	struct cvmx_mio_uartx_sbcr_s          cn68xxp1;
	struct cvmx_mio_uartx_sbcr_s          cnf71xx;
};
typedef union cvmx_mio_uartx_sbcr cvmx_mio_uartx_sbcr_t;
typedef cvmx_mio_uartx_sbcr_t cvmx_uart_sbcr_t;

/**
 * cvmx_mio_uart#_scr
 *
 * MIO_UARTX_SCR = MIO UARTX Scratchpad Register
 *
 * The Scratchpad Register (SCR) is an 8-bit read/write register for programmers to use as a temporary
 * storage space.
 */
union cvmx_mio_uartx_scr {
	uint64_t u64;
	struct cvmx_mio_uartx_scr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t scr                          : 8;  /**< Scratchpad Register */
#else
	uint64_t scr                          : 8;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uartx_scr_s           cn30xx;
	struct cvmx_mio_uartx_scr_s           cn31xx;
	struct cvmx_mio_uartx_scr_s           cn38xx;
	struct cvmx_mio_uartx_scr_s           cn38xxp2;
	struct cvmx_mio_uartx_scr_s           cn50xx;
	struct cvmx_mio_uartx_scr_s           cn52xx;
	struct cvmx_mio_uartx_scr_s           cn52xxp1;
	struct cvmx_mio_uartx_scr_s           cn56xx;
	struct cvmx_mio_uartx_scr_s           cn56xxp1;
	struct cvmx_mio_uartx_scr_s           cn58xx;
	struct cvmx_mio_uartx_scr_s           cn58xxp1;
	struct cvmx_mio_uartx_scr_s           cn61xx;
	struct cvmx_mio_uartx_scr_s           cn63xx;
	struct cvmx_mio_uartx_scr_s           cn63xxp1;
	struct cvmx_mio_uartx_scr_s           cn66xx;
	struct cvmx_mio_uartx_scr_s           cn68xx;
	struct cvmx_mio_uartx_scr_s           cn68xxp1;
	struct cvmx_mio_uartx_scr_s           cnf71xx;
};
typedef union cvmx_mio_uartx_scr cvmx_mio_uartx_scr_t;
typedef cvmx_mio_uartx_scr_t cvmx_uart_scr_t;

/**
 * cvmx_mio_uart#_sfe
 *
 * MIO_UARTX_SFE = MIO UARTX Shadow FIFO Enable Register
 *
 * The Shadow FIFO Enable Register (SFE) is a shadow register for the FIFO enable bit (FCR bit 0) that
 * can be used to remove the burden of having to store the previously written value to the FCR in memory
 * and having to mask this value so that only the FIFO enable bit gets updated.
 */
union cvmx_mio_uartx_sfe {
	uint64_t u64;
	struct cvmx_mio_uartx_sfe_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t sfe                          : 1;  /**< Shadow FIFO Enable */
#else
	uint64_t sfe                          : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} s;
	struct cvmx_mio_uartx_sfe_s           cn30xx;
	struct cvmx_mio_uartx_sfe_s           cn31xx;
	struct cvmx_mio_uartx_sfe_s           cn38xx;
	struct cvmx_mio_uartx_sfe_s           cn38xxp2;
	struct cvmx_mio_uartx_sfe_s           cn50xx;
	struct cvmx_mio_uartx_sfe_s           cn52xx;
	struct cvmx_mio_uartx_sfe_s           cn52xxp1;
	struct cvmx_mio_uartx_sfe_s           cn56xx;
	struct cvmx_mio_uartx_sfe_s           cn56xxp1;
	struct cvmx_mio_uartx_sfe_s           cn58xx;
	struct cvmx_mio_uartx_sfe_s           cn58xxp1;
	struct cvmx_mio_uartx_sfe_s           cn61xx;
	struct cvmx_mio_uartx_sfe_s           cn63xx;
	struct cvmx_mio_uartx_sfe_s           cn63xxp1;
	struct cvmx_mio_uartx_sfe_s           cn66xx;
	struct cvmx_mio_uartx_sfe_s           cn68xx;
	struct cvmx_mio_uartx_sfe_s           cn68xxp1;
	struct cvmx_mio_uartx_sfe_s           cnf71xx;
};
typedef union cvmx_mio_uartx_sfe cvmx_mio_uartx_sfe_t;
typedef cvmx_mio_uartx_sfe_t cvmx_uart_sfe_t;

/**
 * cvmx_mio_uart#_srr
 *
 * MIO_UARTX_SRR = MIO UARTX Software Reset Register
 *
 * The Software Reset Register (SRR) is a write-only register that resets the UART and/or the receive
 * FIFO and/or the transmit FIFO.
 *
 * Bit 0 of the SRR is the UART Soft Reset (USR) bit.  Setting this bit resets the UART.
 *
 * Bit 1 of the SRR is a shadow copy of the RX FIFO Reset bit (FCR bit 1). This can be used to remove
 * the burden on software having to store previously written FCR values (which are pretty static) just
 * to reset the receive FIFO.
 *
 * Bit 2 of the SRR is a shadow copy of the TX FIFO Reset bit (FCR bit 2). This can be used to remove
 * the burden on software having to store previously written FCR values (which are pretty static) just
 * to reset the transmit FIFO.
 */
union cvmx_mio_uartx_srr {
	uint64_t u64;
	struct cvmx_mio_uartx_srr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_3_63                : 61;
	uint64_t stfr                         : 1;  /**< Shadow TX FIFO Reset */
	uint64_t srfr                         : 1;  /**< Shadow RX FIFO Reset */
	uint64_t usr                          : 1;  /**< UART Soft Reset */
#else
	uint64_t usr                          : 1;
	uint64_t srfr                         : 1;
	uint64_t stfr                         : 1;
	uint64_t reserved_3_63                : 61;
#endif
	} s;
	struct cvmx_mio_uartx_srr_s           cn30xx;
	struct cvmx_mio_uartx_srr_s           cn31xx;
	struct cvmx_mio_uartx_srr_s           cn38xx;
	struct cvmx_mio_uartx_srr_s           cn38xxp2;
	struct cvmx_mio_uartx_srr_s           cn50xx;
	struct cvmx_mio_uartx_srr_s           cn52xx;
	struct cvmx_mio_uartx_srr_s           cn52xxp1;
	struct cvmx_mio_uartx_srr_s           cn56xx;
	struct cvmx_mio_uartx_srr_s           cn56xxp1;
	struct cvmx_mio_uartx_srr_s           cn58xx;
	struct cvmx_mio_uartx_srr_s           cn58xxp1;
	struct cvmx_mio_uartx_srr_s           cn61xx;
	struct cvmx_mio_uartx_srr_s           cn63xx;
	struct cvmx_mio_uartx_srr_s           cn63xxp1;
	struct cvmx_mio_uartx_srr_s           cn66xx;
	struct cvmx_mio_uartx_srr_s           cn68xx;
	struct cvmx_mio_uartx_srr_s           cn68xxp1;
	struct cvmx_mio_uartx_srr_s           cnf71xx;
};
typedef union cvmx_mio_uartx_srr cvmx_mio_uartx_srr_t;
typedef cvmx_mio_uartx_srr_t cvmx_uart_srr_t;

/**
 * cvmx_mio_uart#_srt
 *
 * MIO_UARTX_SRT = MIO UARTX Shadow RX Trigger Register
 *
 * The Shadow RX Trigger Register (SRT) is a shadow register for the RX Trigger bits (FCR bits 7:6) that
 * can be used to remove the burden of having to store the previously written value to the FCR in memory
 * and having to mask this value so that only the RX Trigger bits get updated.
 */
union cvmx_mio_uartx_srt {
	uint64_t u64;
	struct cvmx_mio_uartx_srt_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_2_63                : 62;
	uint64_t srt                          : 2;  /**< Shadow RX Trigger */
#else
	uint64_t srt                          : 2;
	uint64_t reserved_2_63                : 62;
#endif
	} s;
	struct cvmx_mio_uartx_srt_s           cn30xx;
	struct cvmx_mio_uartx_srt_s           cn31xx;
	struct cvmx_mio_uartx_srt_s           cn38xx;
	struct cvmx_mio_uartx_srt_s           cn38xxp2;
	struct cvmx_mio_uartx_srt_s           cn50xx;
	struct cvmx_mio_uartx_srt_s           cn52xx;
	struct cvmx_mio_uartx_srt_s           cn52xxp1;
	struct cvmx_mio_uartx_srt_s           cn56xx;
	struct cvmx_mio_uartx_srt_s           cn56xxp1;
	struct cvmx_mio_uartx_srt_s           cn58xx;
	struct cvmx_mio_uartx_srt_s           cn58xxp1;
	struct cvmx_mio_uartx_srt_s           cn61xx;
	struct cvmx_mio_uartx_srt_s           cn63xx;
	struct cvmx_mio_uartx_srt_s           cn63xxp1;
	struct cvmx_mio_uartx_srt_s           cn66xx;
	struct cvmx_mio_uartx_srt_s           cn68xx;
	struct cvmx_mio_uartx_srt_s           cn68xxp1;
	struct cvmx_mio_uartx_srt_s           cnf71xx;
};
typedef union cvmx_mio_uartx_srt cvmx_mio_uartx_srt_t;
typedef cvmx_mio_uartx_srt_t cvmx_uart_srt_t;

/**
 * cvmx_mio_uart#_srts
 *
 * MIO_UARTX_SRTS = MIO UARTX Shadow Request To Send Register
 *
 * The Shadow Request To Send Register (SRTS) is a shadow register for the RTS bit (MCR bit 1) that can
 * be used to remove the burden of having to perform a read-modify-write on the MCR.
 */
union cvmx_mio_uartx_srts {
	uint64_t u64;
	struct cvmx_mio_uartx_srts_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t srts                         : 1;  /**< Shadow Request To Send */
#else
	uint64_t srts                         : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} s;
	struct cvmx_mio_uartx_srts_s          cn30xx;
	struct cvmx_mio_uartx_srts_s          cn31xx;
	struct cvmx_mio_uartx_srts_s          cn38xx;
	struct cvmx_mio_uartx_srts_s          cn38xxp2;
	struct cvmx_mio_uartx_srts_s          cn50xx;
	struct cvmx_mio_uartx_srts_s          cn52xx;
	struct cvmx_mio_uartx_srts_s          cn52xxp1;
	struct cvmx_mio_uartx_srts_s          cn56xx;
	struct cvmx_mio_uartx_srts_s          cn56xxp1;
	struct cvmx_mio_uartx_srts_s          cn58xx;
	struct cvmx_mio_uartx_srts_s          cn58xxp1;
	struct cvmx_mio_uartx_srts_s          cn61xx;
	struct cvmx_mio_uartx_srts_s          cn63xx;
	struct cvmx_mio_uartx_srts_s          cn63xxp1;
	struct cvmx_mio_uartx_srts_s          cn66xx;
	struct cvmx_mio_uartx_srts_s          cn68xx;
	struct cvmx_mio_uartx_srts_s          cn68xxp1;
	struct cvmx_mio_uartx_srts_s          cnf71xx;
};
typedef union cvmx_mio_uartx_srts cvmx_mio_uartx_srts_t;
typedef cvmx_mio_uartx_srts_t cvmx_uart_srts_t;

/**
 * cvmx_mio_uart#_stt
 *
 * MIO_UARTX_STT = MIO UARTX Shadow TX Trigger Register
 *
 * The Shadow TX Trigger Register (STT) is a shadow register for the TX Trigger bits (FCR bits 5:4) that
 * can be used to remove the burden of having to store the previously written value to the FCR in memory
 * and having to mask this value so that only the TX Trigger bits get updated.
 */
union cvmx_mio_uartx_stt {
	uint64_t u64;
	struct cvmx_mio_uartx_stt_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_2_63                : 62;
	uint64_t stt                          : 2;  /**< Shadow TX Trigger */
#else
	uint64_t stt                          : 2;
	uint64_t reserved_2_63                : 62;
#endif
	} s;
	struct cvmx_mio_uartx_stt_s           cn30xx;
	struct cvmx_mio_uartx_stt_s           cn31xx;
	struct cvmx_mio_uartx_stt_s           cn38xx;
	struct cvmx_mio_uartx_stt_s           cn38xxp2;
	struct cvmx_mio_uartx_stt_s           cn50xx;
	struct cvmx_mio_uartx_stt_s           cn52xx;
	struct cvmx_mio_uartx_stt_s           cn52xxp1;
	struct cvmx_mio_uartx_stt_s           cn56xx;
	struct cvmx_mio_uartx_stt_s           cn56xxp1;
	struct cvmx_mio_uartx_stt_s           cn58xx;
	struct cvmx_mio_uartx_stt_s           cn58xxp1;
	struct cvmx_mio_uartx_stt_s           cn61xx;
	struct cvmx_mio_uartx_stt_s           cn63xx;
	struct cvmx_mio_uartx_stt_s           cn63xxp1;
	struct cvmx_mio_uartx_stt_s           cn66xx;
	struct cvmx_mio_uartx_stt_s           cn68xx;
	struct cvmx_mio_uartx_stt_s           cn68xxp1;
	struct cvmx_mio_uartx_stt_s           cnf71xx;
};
typedef union cvmx_mio_uartx_stt cvmx_mio_uartx_stt_t;
typedef cvmx_mio_uartx_stt_t cvmx_uart_stt_t;

/**
 * cvmx_mio_uart#_tfl
 *
 * MIO_UARTX_TFL = MIO UARTX Transmit FIFO Level Register
 *
 * The Transmit FIFO Level Register (TFL) indicates the number of data entries in the transmit FIFO.
 */
union cvmx_mio_uartx_tfl {
	uint64_t u64;
	struct cvmx_mio_uartx_tfl_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_7_63                : 57;
	uint64_t tfl                          : 7;  /**< Transmit FIFO Level Register */
#else
	uint64_t tfl                          : 7;
	uint64_t reserved_7_63                : 57;
#endif
	} s;
	struct cvmx_mio_uartx_tfl_s           cn30xx;
	struct cvmx_mio_uartx_tfl_s           cn31xx;
	struct cvmx_mio_uartx_tfl_s           cn38xx;
	struct cvmx_mio_uartx_tfl_s           cn38xxp2;
	struct cvmx_mio_uartx_tfl_s           cn50xx;
	struct cvmx_mio_uartx_tfl_s           cn52xx;
	struct cvmx_mio_uartx_tfl_s           cn52xxp1;
	struct cvmx_mio_uartx_tfl_s           cn56xx;
	struct cvmx_mio_uartx_tfl_s           cn56xxp1;
	struct cvmx_mio_uartx_tfl_s           cn58xx;
	struct cvmx_mio_uartx_tfl_s           cn58xxp1;
	struct cvmx_mio_uartx_tfl_s           cn61xx;
	struct cvmx_mio_uartx_tfl_s           cn63xx;
	struct cvmx_mio_uartx_tfl_s           cn63xxp1;
	struct cvmx_mio_uartx_tfl_s           cn66xx;
	struct cvmx_mio_uartx_tfl_s           cn68xx;
	struct cvmx_mio_uartx_tfl_s           cn68xxp1;
	struct cvmx_mio_uartx_tfl_s           cnf71xx;
};
typedef union cvmx_mio_uartx_tfl cvmx_mio_uartx_tfl_t;
typedef cvmx_mio_uartx_tfl_t cvmx_uart_tfl_t;

/**
 * cvmx_mio_uart#_tfr
 *
 * MIO_UARTX_TFR = MIO UARTX Transmit FIFO Read Register
 *
 * The Transmit FIFO Read Register (TFR) is only valid when FIFO access mode is enabled (FAR bit 0 is
 * set). When FIFOs are enabled, reading this register gives the data at the top of the transmit FIFO.
 * Each consecutive read pops the transmit FIFO and gives the next data value that is currently at the
 * top of the FIFO. When FIFOs are not enabled, reading this register gives the data in the THR.
 */
union cvmx_mio_uartx_tfr {
	uint64_t u64;
	struct cvmx_mio_uartx_tfr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t tfr                          : 8;  /**< Transmit FIFO Read Register */
#else
	uint64_t tfr                          : 8;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uartx_tfr_s           cn30xx;
	struct cvmx_mio_uartx_tfr_s           cn31xx;
	struct cvmx_mio_uartx_tfr_s           cn38xx;
	struct cvmx_mio_uartx_tfr_s           cn38xxp2;
	struct cvmx_mio_uartx_tfr_s           cn50xx;
	struct cvmx_mio_uartx_tfr_s           cn52xx;
	struct cvmx_mio_uartx_tfr_s           cn52xxp1;
	struct cvmx_mio_uartx_tfr_s           cn56xx;
	struct cvmx_mio_uartx_tfr_s           cn56xxp1;
	struct cvmx_mio_uartx_tfr_s           cn58xx;
	struct cvmx_mio_uartx_tfr_s           cn58xxp1;
	struct cvmx_mio_uartx_tfr_s           cn61xx;
	struct cvmx_mio_uartx_tfr_s           cn63xx;
	struct cvmx_mio_uartx_tfr_s           cn63xxp1;
	struct cvmx_mio_uartx_tfr_s           cn66xx;
	struct cvmx_mio_uartx_tfr_s           cn68xx;
	struct cvmx_mio_uartx_tfr_s           cn68xxp1;
	struct cvmx_mio_uartx_tfr_s           cnf71xx;
};
typedef union cvmx_mio_uartx_tfr cvmx_mio_uartx_tfr_t;
typedef cvmx_mio_uartx_tfr_t cvmx_uart_tfr_t;

/**
 * cvmx_mio_uart#_thr
 *
 * MIO_UARTX_THR = MIO UARTX Transmit Holding Register
 *
 * Transmit Holding Register (THR) is a write-only register that contains data to be transmitted on the
 * serial output port (sout). Data can be written to the THR any time that the THR Empty (THRE) bit of
 * the Line Status Register (LSR) is set.
 *
 * If FIFOs are not enabled and THRE is set, writing a single character to the THR clears the THRE. Any
 * additional writes to the THR before the THRE is set again causes the THR data to be overwritten.
 *
 * If FIFOs are enabled and THRE is set (and Programmable THRE mode disabled), 64 characters of data may
 * be written to the THR before the FIFO is full. Any attempt to write data when the FIFO is full results
 * in the write data being lost.
 *
 * Note: The Divisor Latch Address Bit (DLAB) of the Line Control Register (LCR) must be clear to access
 * this register.
 *
 * Note: The address below is an alias to simplify these CSR descriptions. It should be known that the
 * RBR, THR, and DLL registers are the same.
 */
union cvmx_mio_uartx_thr {
	uint64_t u64;
	struct cvmx_mio_uartx_thr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t thr                          : 8;  /**< Transmit Holding Register */
#else
	uint64_t thr                          : 8;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uartx_thr_s           cn30xx;
	struct cvmx_mio_uartx_thr_s           cn31xx;
	struct cvmx_mio_uartx_thr_s           cn38xx;
	struct cvmx_mio_uartx_thr_s           cn38xxp2;
	struct cvmx_mio_uartx_thr_s           cn50xx;
	struct cvmx_mio_uartx_thr_s           cn52xx;
	struct cvmx_mio_uartx_thr_s           cn52xxp1;
	struct cvmx_mio_uartx_thr_s           cn56xx;
	struct cvmx_mio_uartx_thr_s           cn56xxp1;
	struct cvmx_mio_uartx_thr_s           cn58xx;
	struct cvmx_mio_uartx_thr_s           cn58xxp1;
	struct cvmx_mio_uartx_thr_s           cn61xx;
	struct cvmx_mio_uartx_thr_s           cn63xx;
	struct cvmx_mio_uartx_thr_s           cn63xxp1;
	struct cvmx_mio_uartx_thr_s           cn66xx;
	struct cvmx_mio_uartx_thr_s           cn68xx;
	struct cvmx_mio_uartx_thr_s           cn68xxp1;
	struct cvmx_mio_uartx_thr_s           cnf71xx;
};
typedef union cvmx_mio_uartx_thr cvmx_mio_uartx_thr_t;
typedef cvmx_mio_uartx_thr_t cvmx_uart_thr_t;

/**
 * cvmx_mio_uart#_usr
 *
 * MIO_UARTX_USR = MIO UARTX UART Status Register
 *
 * The UART Status Register (USR) contains UART status information.
 *
 * USR bit 0 is the BUSY bit.  When set this bit indicates that a serial transfer is in progress, when
 * clear it indicates that the UART is idle or inactive.
 *
 * Note: In PASS3, the BUSY bit will always be clear.
 *
 * USR bits 1-4 indicate the following FIFO status: TX FIFO Not Full (TFNF), TX FIFO Empty (TFE), RX
 * FIFO Not Empty (RFNE), and RX FIFO Full (RFF).
 */
union cvmx_mio_uartx_usr {
	uint64_t u64;
	struct cvmx_mio_uartx_usr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_5_63                : 59;
	uint64_t rff                          : 1;  /**< RX FIFO Full */
	uint64_t rfne                         : 1;  /**< RX FIFO Not Empty */
	uint64_t tfe                          : 1;  /**< TX FIFO Empty */
	uint64_t tfnf                         : 1;  /**< TX FIFO Not Full */
	uint64_t busy                         : 1;  /**< Busy bit (always 0 in PASS3) */
#else
	uint64_t busy                         : 1;
	uint64_t tfnf                         : 1;
	uint64_t tfe                          : 1;
	uint64_t rfne                         : 1;
	uint64_t rff                          : 1;
	uint64_t reserved_5_63                : 59;
#endif
	} s;
	struct cvmx_mio_uartx_usr_s           cn30xx;
	struct cvmx_mio_uartx_usr_s           cn31xx;
	struct cvmx_mio_uartx_usr_s           cn38xx;
	struct cvmx_mio_uartx_usr_s           cn38xxp2;
	struct cvmx_mio_uartx_usr_s           cn50xx;
	struct cvmx_mio_uartx_usr_s           cn52xx;
	struct cvmx_mio_uartx_usr_s           cn52xxp1;
	struct cvmx_mio_uartx_usr_s           cn56xx;
	struct cvmx_mio_uartx_usr_s           cn56xxp1;
	struct cvmx_mio_uartx_usr_s           cn58xx;
	struct cvmx_mio_uartx_usr_s           cn58xxp1;
	struct cvmx_mio_uartx_usr_s           cn61xx;
	struct cvmx_mio_uartx_usr_s           cn63xx;
	struct cvmx_mio_uartx_usr_s           cn63xxp1;
	struct cvmx_mio_uartx_usr_s           cn66xx;
	struct cvmx_mio_uartx_usr_s           cn68xx;
	struct cvmx_mio_uartx_usr_s           cn68xxp1;
	struct cvmx_mio_uartx_usr_s           cnf71xx;
};
typedef union cvmx_mio_uartx_usr cvmx_mio_uartx_usr_t;
typedef cvmx_mio_uartx_usr_t cvmx_uart_usr_t;

/**
 * cvmx_mio_uart2_dlh
 */
union cvmx_mio_uart2_dlh {
	uint64_t u64;
	struct cvmx_mio_uart2_dlh_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t dlh                          : 8;  /**< Divisor Latch High Register */
#else
	uint64_t dlh                          : 8;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uart2_dlh_s           cn52xx;
	struct cvmx_mio_uart2_dlh_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_dlh cvmx_mio_uart2_dlh_t;

/**
 * cvmx_mio_uart2_dll
 */
union cvmx_mio_uart2_dll {
	uint64_t u64;
	struct cvmx_mio_uart2_dll_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t dll                          : 8;  /**< Divisor Latch Low Register */
#else
	uint64_t dll                          : 8;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uart2_dll_s           cn52xx;
	struct cvmx_mio_uart2_dll_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_dll cvmx_mio_uart2_dll_t;

/**
 * cvmx_mio_uart2_far
 */
union cvmx_mio_uart2_far {
	uint64_t u64;
	struct cvmx_mio_uart2_far_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t far                          : 1;  /**< FIFO Access Register */
#else
	uint64_t far                          : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} s;
	struct cvmx_mio_uart2_far_s           cn52xx;
	struct cvmx_mio_uart2_far_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_far cvmx_mio_uart2_far_t;

/**
 * cvmx_mio_uart2_fcr
 */
union cvmx_mio_uart2_fcr {
	uint64_t u64;
	struct cvmx_mio_uart2_fcr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t rxtrig                       : 2;  /**< RX Trigger */
	uint64_t txtrig                       : 2;  /**< TX Trigger */
	uint64_t reserved_3_3                 : 1;
	uint64_t txfr                         : 1;  /**< TX FIFO reset */
	uint64_t rxfr                         : 1;  /**< RX FIFO reset */
	uint64_t en                           : 1;  /**< FIFO enable */
#else
	uint64_t en                           : 1;
	uint64_t rxfr                         : 1;
	uint64_t txfr                         : 1;
	uint64_t reserved_3_3                 : 1;
	uint64_t txtrig                       : 2;
	uint64_t rxtrig                       : 2;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uart2_fcr_s           cn52xx;
	struct cvmx_mio_uart2_fcr_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_fcr cvmx_mio_uart2_fcr_t;

/**
 * cvmx_mio_uart2_htx
 */
union cvmx_mio_uart2_htx {
	uint64_t u64;
	struct cvmx_mio_uart2_htx_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t htx                          : 1;  /**< Halt TX */
#else
	uint64_t htx                          : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} s;
	struct cvmx_mio_uart2_htx_s           cn52xx;
	struct cvmx_mio_uart2_htx_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_htx cvmx_mio_uart2_htx_t;

/**
 * cvmx_mio_uart2_ier
 */
union cvmx_mio_uart2_ier {
	uint64_t u64;
	struct cvmx_mio_uart2_ier_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t ptime                        : 1;  /**< Programmable THRE Interrupt mode enable */
	uint64_t reserved_4_6                 : 3;
	uint64_t edssi                        : 1;  /**< Enable Modem Status Interrupt */
	uint64_t elsi                         : 1;  /**< Enable Receiver Line Status Interrupt */
	uint64_t etbei                        : 1;  /**< Enable Transmitter Holding Register Empty Interrupt */
	uint64_t erbfi                        : 1;  /**< Enable Received Data Available Interrupt */
#else
	uint64_t erbfi                        : 1;
	uint64_t etbei                        : 1;
	uint64_t elsi                         : 1;
	uint64_t edssi                        : 1;
	uint64_t reserved_4_6                 : 3;
	uint64_t ptime                        : 1;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uart2_ier_s           cn52xx;
	struct cvmx_mio_uart2_ier_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_ier cvmx_mio_uart2_ier_t;

/**
 * cvmx_mio_uart2_iir
 */
union cvmx_mio_uart2_iir {
	uint64_t u64;
	struct cvmx_mio_uart2_iir_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t fen                          : 2;  /**< FIFO-enabled bits */
	uint64_t reserved_4_5                 : 2;
	uint64_t iid                          : 4;  /**< Interrupt ID */
#else
	uint64_t iid                          : 4;
	uint64_t reserved_4_5                 : 2;
	uint64_t fen                          : 2;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uart2_iir_s           cn52xx;
	struct cvmx_mio_uart2_iir_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_iir cvmx_mio_uart2_iir_t;

/**
 * cvmx_mio_uart2_lcr
 */
union cvmx_mio_uart2_lcr {
	uint64_t u64;
	struct cvmx_mio_uart2_lcr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t dlab                         : 1;  /**< Divisor Latch Address bit */
	uint64_t brk                          : 1;  /**< Break Control bit */
	uint64_t reserved_5_5                 : 1;
	uint64_t eps                          : 1;  /**< Even Parity Select bit */
	uint64_t pen                          : 1;  /**< Parity Enable bit */
	uint64_t stop                         : 1;  /**< Stop Control bit */
	uint64_t cls                          : 2;  /**< Character Length Select */
#else
	uint64_t cls                          : 2;
	uint64_t stop                         : 1;
	uint64_t pen                          : 1;
	uint64_t eps                          : 1;
	uint64_t reserved_5_5                 : 1;
	uint64_t brk                          : 1;
	uint64_t dlab                         : 1;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uart2_lcr_s           cn52xx;
	struct cvmx_mio_uart2_lcr_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_lcr cvmx_mio_uart2_lcr_t;

/**
 * cvmx_mio_uart2_lsr
 */
union cvmx_mio_uart2_lsr {
	uint64_t u64;
	struct cvmx_mio_uart2_lsr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t ferr                         : 1;  /**< Error in Receiver FIFO bit */
	uint64_t temt                         : 1;  /**< Transmitter Empty bit */
	uint64_t thre                         : 1;  /**< Transmitter Holding Register Empty bit */
	uint64_t bi                           : 1;  /**< Break Interrupt bit */
	uint64_t fe                           : 1;  /**< Framing Error bit */
	uint64_t pe                           : 1;  /**< Parity Error bit */
	uint64_t oe                           : 1;  /**< Overrun Error bit */
	uint64_t dr                           : 1;  /**< Data Ready bit */
#else
	uint64_t dr                           : 1;
	uint64_t oe                           : 1;
	uint64_t pe                           : 1;
	uint64_t fe                           : 1;
	uint64_t bi                           : 1;
	uint64_t thre                         : 1;
	uint64_t temt                         : 1;
	uint64_t ferr                         : 1;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uart2_lsr_s           cn52xx;
	struct cvmx_mio_uart2_lsr_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_lsr cvmx_mio_uart2_lsr_t;

/**
 * cvmx_mio_uart2_mcr
 */
union cvmx_mio_uart2_mcr {
	uint64_t u64;
	struct cvmx_mio_uart2_mcr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_6_63                : 58;
	uint64_t afce                         : 1;  /**< Auto Flow Control Enable bit */
	uint64_t loop                         : 1;  /**< Loopback bit */
	uint64_t out2                         : 1;  /**< OUT2 output bit */
	uint64_t out1                         : 1;  /**< OUT1 output bit */
	uint64_t rts                          : 1;  /**< Request To Send output bit */
	uint64_t dtr                          : 1;  /**< Data Terminal Ready output bit */
#else
	uint64_t dtr                          : 1;
	uint64_t rts                          : 1;
	uint64_t out1                         : 1;
	uint64_t out2                         : 1;
	uint64_t loop                         : 1;
	uint64_t afce                         : 1;
	uint64_t reserved_6_63                : 58;
#endif
	} s;
	struct cvmx_mio_uart2_mcr_s           cn52xx;
	struct cvmx_mio_uart2_mcr_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_mcr cvmx_mio_uart2_mcr_t;

/**
 * cvmx_mio_uart2_msr
 */
union cvmx_mio_uart2_msr {
	uint64_t u64;
	struct cvmx_mio_uart2_msr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t dcd                          : 1;  /**< Data Carrier Detect input bit */
	uint64_t ri                           : 1;  /**< Ring Indicator input bit */
	uint64_t dsr                          : 1;  /**< Data Set Ready input bit */
	uint64_t cts                          : 1;  /**< Clear To Send input bit */
	uint64_t ddcd                         : 1;  /**< Delta Data Carrier Detect bit */
	uint64_t teri                         : 1;  /**< Trailing Edge of Ring Indicator bit */
	uint64_t ddsr                         : 1;  /**< Delta Data Set Ready bit */
	uint64_t dcts                         : 1;  /**< Delta Clear To Send bit */
#else
	uint64_t dcts                         : 1;
	uint64_t ddsr                         : 1;
	uint64_t teri                         : 1;
	uint64_t ddcd                         : 1;
	uint64_t cts                          : 1;
	uint64_t dsr                          : 1;
	uint64_t ri                           : 1;
	uint64_t dcd                          : 1;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uart2_msr_s           cn52xx;
	struct cvmx_mio_uart2_msr_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_msr cvmx_mio_uart2_msr_t;

/**
 * cvmx_mio_uart2_rbr
 */
union cvmx_mio_uart2_rbr {
	uint64_t u64;
	struct cvmx_mio_uart2_rbr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t rbr                          : 8;  /**< Receive Buffer Register */
#else
	uint64_t rbr                          : 8;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uart2_rbr_s           cn52xx;
	struct cvmx_mio_uart2_rbr_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_rbr cvmx_mio_uart2_rbr_t;

/**
 * cvmx_mio_uart2_rfl
 */
union cvmx_mio_uart2_rfl {
	uint64_t u64;
	struct cvmx_mio_uart2_rfl_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_7_63                : 57;
	uint64_t rfl                          : 7;  /**< Receive FIFO Level Register */
#else
	uint64_t rfl                          : 7;
	uint64_t reserved_7_63                : 57;
#endif
	} s;
	struct cvmx_mio_uart2_rfl_s           cn52xx;
	struct cvmx_mio_uart2_rfl_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_rfl cvmx_mio_uart2_rfl_t;

/**
 * cvmx_mio_uart2_rfw
 */
union cvmx_mio_uart2_rfw {
	uint64_t u64;
	struct cvmx_mio_uart2_rfw_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_10_63               : 54;
	uint64_t rffe                         : 1;  /**< Receive FIFO Framing Error */
	uint64_t rfpe                         : 1;  /**< Receive FIFO Parity Error */
	uint64_t rfwd                         : 8;  /**< Receive FIFO Write Data */
#else
	uint64_t rfwd                         : 8;
	uint64_t rfpe                         : 1;
	uint64_t rffe                         : 1;
	uint64_t reserved_10_63               : 54;
#endif
	} s;
	struct cvmx_mio_uart2_rfw_s           cn52xx;
	struct cvmx_mio_uart2_rfw_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_rfw cvmx_mio_uart2_rfw_t;

/**
 * cvmx_mio_uart2_sbcr
 */
union cvmx_mio_uart2_sbcr {
	uint64_t u64;
	struct cvmx_mio_uart2_sbcr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t sbcr                         : 1;  /**< Shadow Break Control */
#else
	uint64_t sbcr                         : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} s;
	struct cvmx_mio_uart2_sbcr_s          cn52xx;
	struct cvmx_mio_uart2_sbcr_s          cn52xxp1;
};
typedef union cvmx_mio_uart2_sbcr cvmx_mio_uart2_sbcr_t;

/**
 * cvmx_mio_uart2_scr
 */
union cvmx_mio_uart2_scr {
	uint64_t u64;
	struct cvmx_mio_uart2_scr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t scr                          : 8;  /**< Scratchpad Register */
#else
	uint64_t scr                          : 8;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uart2_scr_s           cn52xx;
	struct cvmx_mio_uart2_scr_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_scr cvmx_mio_uart2_scr_t;

/**
 * cvmx_mio_uart2_sfe
 */
union cvmx_mio_uart2_sfe {
	uint64_t u64;
	struct cvmx_mio_uart2_sfe_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t sfe                          : 1;  /**< Shadow FIFO Enable */
#else
	uint64_t sfe                          : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} s;
	struct cvmx_mio_uart2_sfe_s           cn52xx;
	struct cvmx_mio_uart2_sfe_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_sfe cvmx_mio_uart2_sfe_t;

/**
 * cvmx_mio_uart2_srr
 */
union cvmx_mio_uart2_srr {
	uint64_t u64;
	struct cvmx_mio_uart2_srr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_3_63                : 61;
	uint64_t stfr                         : 1;  /**< Shadow TX FIFO Reset */
	uint64_t srfr                         : 1;  /**< Shadow RX FIFO Reset */
	uint64_t usr                          : 1;  /**< UART Soft Reset */
#else
	uint64_t usr                          : 1;
	uint64_t srfr                         : 1;
	uint64_t stfr                         : 1;
	uint64_t reserved_3_63                : 61;
#endif
	} s;
	struct cvmx_mio_uart2_srr_s           cn52xx;
	struct cvmx_mio_uart2_srr_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_srr cvmx_mio_uart2_srr_t;

/**
 * cvmx_mio_uart2_srt
 */
union cvmx_mio_uart2_srt {
	uint64_t u64;
	struct cvmx_mio_uart2_srt_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_2_63                : 62;
	uint64_t srt                          : 2;  /**< Shadow RX Trigger */
#else
	uint64_t srt                          : 2;
	uint64_t reserved_2_63                : 62;
#endif
	} s;
	struct cvmx_mio_uart2_srt_s           cn52xx;
	struct cvmx_mio_uart2_srt_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_srt cvmx_mio_uart2_srt_t;

/**
 * cvmx_mio_uart2_srts
 */
union cvmx_mio_uart2_srts {
	uint64_t u64;
	struct cvmx_mio_uart2_srts_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_1_63                : 63;
	uint64_t srts                         : 1;  /**< Shadow Request To Send */
#else
	uint64_t srts                         : 1;
	uint64_t reserved_1_63                : 63;
#endif
	} s;
	struct cvmx_mio_uart2_srts_s          cn52xx;
	struct cvmx_mio_uart2_srts_s          cn52xxp1;
};
typedef union cvmx_mio_uart2_srts cvmx_mio_uart2_srts_t;

/**
 * cvmx_mio_uart2_stt
 */
union cvmx_mio_uart2_stt {
	uint64_t u64;
	struct cvmx_mio_uart2_stt_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_2_63                : 62;
	uint64_t stt                          : 2;  /**< Shadow TX Trigger */
#else
	uint64_t stt                          : 2;
	uint64_t reserved_2_63                : 62;
#endif
	} s;
	struct cvmx_mio_uart2_stt_s           cn52xx;
	struct cvmx_mio_uart2_stt_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_stt cvmx_mio_uart2_stt_t;

/**
 * cvmx_mio_uart2_tfl
 */
union cvmx_mio_uart2_tfl {
	uint64_t u64;
	struct cvmx_mio_uart2_tfl_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_7_63                : 57;
	uint64_t tfl                          : 7;  /**< Transmit FIFO Level Register */
#else
	uint64_t tfl                          : 7;
	uint64_t reserved_7_63                : 57;
#endif
	} s;
	struct cvmx_mio_uart2_tfl_s           cn52xx;
	struct cvmx_mio_uart2_tfl_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_tfl cvmx_mio_uart2_tfl_t;

/**
 * cvmx_mio_uart2_tfr
 */
union cvmx_mio_uart2_tfr {
	uint64_t u64;
	struct cvmx_mio_uart2_tfr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t tfr                          : 8;  /**< Transmit FIFO Read Register */
#else
	uint64_t tfr                          : 8;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uart2_tfr_s           cn52xx;
	struct cvmx_mio_uart2_tfr_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_tfr cvmx_mio_uart2_tfr_t;

/**
 * cvmx_mio_uart2_thr
 */
union cvmx_mio_uart2_thr {
	uint64_t u64;
	struct cvmx_mio_uart2_thr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_8_63                : 56;
	uint64_t thr                          : 8;  /**< Transmit Holding Register */
#else
	uint64_t thr                          : 8;
	uint64_t reserved_8_63                : 56;
#endif
	} s;
	struct cvmx_mio_uart2_thr_s           cn52xx;
	struct cvmx_mio_uart2_thr_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_thr cvmx_mio_uart2_thr_t;

/**
 * cvmx_mio_uart2_usr
 */
union cvmx_mio_uart2_usr {
	uint64_t u64;
	struct cvmx_mio_uart2_usr_s {
#ifdef __BIG_ENDIAN_BITFIELD
	uint64_t reserved_5_63                : 59;
	uint64_t rff                          : 1;  /**< RX FIFO Full */
	uint64_t rfne                         : 1;  /**< RX FIFO Not Empty */
	uint64_t tfe                          : 1;  /**< TX FIFO Empty */
	uint64_t tfnf                         : 1;  /**< TX FIFO Not Full */
	uint64_t busy                         : 1;  /**< Busy bit (always 0 in PASS3) */
#else
	uint64_t busy                         : 1;
	uint64_t tfnf                         : 1;
	uint64_t tfe                          : 1;
	uint64_t rfne                         : 1;
	uint64_t rff                          : 1;
	uint64_t reserved_5_63                : 59;
#endif
	} s;
	struct cvmx_mio_uart2_usr_s           cn52xx;
	struct cvmx_mio_uart2_usr_s           cn52xxp1;
};
typedef union cvmx_mio_uart2_usr cvmx_mio_uart2_usr_t;

#endif