freebsd-skq/usr.bin/netstat/unix.c

330 lines
8.8 KiB
C
Raw Normal View History

1994-05-27 12:33:43 +00:00
/*-
* SPDX-License-Identifier: BSD-3-Clause
*
1994-05-27 12:33:43 +00:00
* Copyright (c) 1983, 1988, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
1994-05-27 12:33:43 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if 0
#ifndef lint
1994-05-27 12:33:43 +00:00
static char sccsid[] = "@(#)unix.c 8.1 (Berkeley) 6/6/93";
#endif /* not lint */
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
1994-05-27 12:33:43 +00:00
/*
* Display protocol blocks in the unix domain.
*/
#include <sys/param.h>
#include <sys/queue.h>
1994-05-27 12:33:43 +00:00
#include <sys/protosw.h>
#include <sys/socket.h>
#define _WANT_SOCKET
1994-05-27 12:33:43 +00:00
#include <sys/socketvar.h>
#include <sys/mbuf.h>
#include <sys/sysctl.h>
#include <sys/un.h>
#define _WANT_UNPCB
1994-05-27 12:33:43 +00:00
#include <sys/unpcb.h>
#include <netinet/in.h>
#include <errno.h>
1998-08-08 08:13:04 +00:00
#include <err.h>
#include <stddef.h>
#include <stdint.h>
1994-05-27 12:33:43 +00:00
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
#include <strings.h>
#include <kvm.h>
#include <libxo/xo.h>
1994-05-27 12:33:43 +00:00
#include "netstat.h"
static void unixdomainpr(struct xunpcb *, struct xsocket *);
1994-05-27 12:33:43 +00:00
static const char *const socktype[] =
{ "#0", "stream", "dgram", "raw", "rdm", "seqpacket" };
1994-05-27 12:33:43 +00:00
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
static int
pcblist_sysctl(int type, char **bufp)
1994-05-27 12:33:43 +00:00
{
char *buf;
size_t len;
char mibvar[sizeof "net.local.seqpacket.pcblist"];
1994-05-27 12:33:43 +00:00
snprintf(mibvar, sizeof(mibvar), "net.local.%s.pcblist", socktype[type]);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
len = 0;
if (sysctlbyname(mibvar, 0, &len, 0, 0) < 0) {
if (errno != ENOENT)
xo_warn("sysctl: %s", mibvar);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
return (-1);
}
if ((buf = malloc(len)) == NULL) {
xo_warnx("malloc %lu bytes", (u_long)len);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
return (-2);
}
if (sysctlbyname(mibvar, buf, &len, 0, 0) < 0) {
xo_warn("sysctl: %s", mibvar);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
free(buf);
return (-2);
}
*bufp = buf;
return (0);
}
static int
pcblist_kvm(u_long count_off, u_long gencnt_off, u_long head_off, char **bufp)
{
struct unp_head head;
struct unpcb *unp, unp0, unp_conn;
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
u_char sun_len;
struct socket so;
struct xunpgen xug;
struct xunpcb xu;
unp_gen_t unp_gencnt;
u_int unp_count;
char *buf, *p;
size_t len;
if (count_off == 0 || gencnt_off == 0)
return (-2);
if (head_off == 0)
return (-1);
kread(count_off, &unp_count, sizeof(unp_count));
len = 2 * sizeof(xug) + (unp_count + unp_count / 8) * sizeof(xu);
if ((buf = malloc(len)) == NULL) {
xo_warnx("malloc %lu bytes", (u_long)len);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
return (-2);
}
p = buf;
#define COPYOUT(obj, size) do { \
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (len < (size)) { \
xo_warnx("buffer size exceeded"); \
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
goto fail; \
} \
bcopy((obj), p, (size)); \
len -= (size); \
p += (size); \
} while (0)
#define KREAD(off, buf, len) do { \
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (kread((uintptr_t)(off), (buf), (len)) != 0) \
goto fail; \
} while (0)
/* Write out header. */
kread(gencnt_off, &unp_gencnt, sizeof(unp_gencnt));
xug.xug_len = sizeof xug;
xug.xug_count = unp_count;
xug.xug_gen = unp_gencnt;
xug.xug_sogen = 0;
COPYOUT(&xug, sizeof xug);
/* Walk the PCB list. */
xu.xu_len = sizeof xu;
KREAD(head_off, &head, sizeof(head));
LIST_FOREACH(unp, &head, unp_link) {
xu.xu_unpp = unp;
KREAD(unp, &unp0, sizeof (*unp));
unp = &unp0;
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (unp->unp_gencnt > unp_gencnt)
1994-05-27 12:33:43 +00:00
continue;
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (unp->unp_addr != NULL) {
KREAD(unp->unp_addr, &sun_len, sizeof(sun_len));
KREAD(unp->unp_addr, &xu.xu_addr, sun_len);
}
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (unp->unp_conn != NULL) {
KREAD(unp->unp_conn, &unp_conn, sizeof(unp_conn));
if (unp_conn.unp_addr != NULL) {
KREAD(unp_conn.unp_addr, &sun_len,
sizeof(sun_len));
KREAD(unp_conn.unp_addr, &xu.xu_caddr, sun_len);
}
}
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
KREAD(unp->unp_socket, &so, sizeof(so));
if (sotoxsocket(&so, &xu.xu_socket) != 0)
goto fail;
COPYOUT(&xu, sizeof(xu));
}
/* Reread the counts and write the footer. */
kread(count_off, &unp_count, sizeof(unp_count));
kread(gencnt_off, &unp_gencnt, sizeof(unp_gencnt));
xug.xug_count = unp_count;
xug.xug_gen = unp_gencnt;
COPYOUT(&xug, sizeof xug);
*bufp = buf;
return (0);
fail:
free(buf);
return (-1);
#undef COPYOUT
#undef KREAD
}
void
unixpr(u_long count_off, u_long gencnt_off, u_long dhead_off, u_long shead_off,
u_long sphead_off, bool *first)
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{
char *buf;
int ret, type;
struct xsocket *so;
struct xunpgen *xug, *oxug;
struct xunpcb *xunp;
u_long head_off;
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
2013-02-19 13:17:16 +00:00
buf = NULL;
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
for (type = SOCK_STREAM; type <= SOCK_SEQPACKET; type++) {
if (live)
ret = pcblist_sysctl(type, &buf);
else {
head_off = 0;
switch (type) {
case SOCK_STREAM:
head_off = shead_off;
break;
case SOCK_DGRAM:
head_off = dhead_off;
break;
case SOCK_SEQPACKET:
head_off = sphead_off;
break;
}
ret = pcblist_kvm(count_off, gencnt_off, head_off,
&buf);
}
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (ret == -1)
continue;
if (ret < 0)
return;
oxug = xug = (struct xunpgen *)buf;
for (xug = (struct xunpgen *)((char *)xug + xug->xug_len);
xug->xug_len > sizeof(struct xunpgen);
xug = (struct xunpgen *)((char *)xug + xug->xug_len)) {
xunp = (struct xunpcb *)xug;
so = &xunp->xu_socket;
/* Ignore PCBs which were freed during copyout. */
if (xunp->unp_gencnt > oxug->xug_gen)
continue;
if (*first) {
xo_open_list("socket");
*first = false;
}
xo_open_instance("socket");
unixdomainpr(xunp, so);
xo_close_instance("socket");
}
if (xug != oxug && xug->xug_gen != oxug->xug_gen) {
if (oxug->xug_count > xug->xug_count) {
xo_emit("Some {:type/%s} sockets may have "
"been {:action/deleted}.\n",
socktype[type]);
} else if (oxug->xug_count < xug->xug_count) {
xo_emit("Some {:type/%s} sockets may have "
"been {:action/created}.\n",
socktype[type]);
} else {
xo_emit("Some {:type/%s} sockets may have "
"been {:action/created or deleted}",
socktype[type]);
}
}
free(buf);
1994-05-27 12:33:43 +00:00
}
}
static void
2001-06-15 23:35:13 +00:00
unixdomainpr(struct xunpcb *xunp, struct xsocket *so)
1994-05-27 12:33:43 +00:00
{
struct sockaddr_un *sa;
1994-05-27 12:33:43 +00:00
static int first = 1;
char buf1[33];
static const char *titles[2] = {
"{T:/%-8.8s} {T:/%-6.6s} {T:/%-6.6s} {T:/%-6.6s} {T:/%8.8s} "
"{T:/%8.8s} {T:/%8.8s} {T:/%8.8s} {T:Addr}\n",
"{T:/%-16.16s} {T:/%-6.6s} {T:/%-6.6s} {T:/%-6.6s} {T:/%16.16s} "
"{T:/%16.16s} {T:/%16.16s} {T:/%16.16s} {T:Addr}\n"
};
static const char *format[2] = {
"{q:address/%8lx} {t:type/%-6.6s} "
"{:receive-bytes-waiting/%6u} "
"{:send-bytes-waiting/%6u} "
"{q:vnode/%8lx} {q:connection/%8lx} "
"{q:first-reference/%8lx} {q:next-reference/%8lx}",
"{q:address/%16lx} {t:type/%-6.6s} "
"{:receive-bytes-waiting/%6u} "
"{:send-bytes-waiting/%6u} "
"{q:vnode/%16lx} {q:connection/%16lx} "
"{q:first-reference/%16lx} {q:next-reference/%16lx}"
};
int fmt = (sizeof(void *) == 8) ? 1 : 0;
1994-05-27 12:33:43 +00:00
sa = (xunp->xu_addr.sun_family == AF_UNIX) ? &xunp->xu_addr : NULL;
if (first && !Lflag) {
xo_emit("{T:Active UNIX domain sockets}\n");
xo_emit(titles[fmt],
1994-05-27 12:33:43 +00:00
"Address", "Type", "Recv-Q", "Send-Q",
"Inode", "Conn", "Refs", "Nextref");
first = 0;
}
if (Lflag && so->so_qlimit == 0)
return;
if (Lflag) {
snprintf(buf1, sizeof buf1, "%u/%u/%u", so->so_qlen,
so->so_incqlen, so->so_qlimit);
xo_emit("unix {d:socket/%-32.32s}{e:queue-length/%u}"
"{e:incomplete-queue-length/%u}{e:queue-limit/%u}",
buf1, so->so_qlen, so->so_incqlen, so->so_qlimit);
} else {
xo_emit(format[fmt],
(long)so->so_pcb, socktype[so->so_type], so->so_rcv.sb_cc,
so->so_snd.sb_cc, (long)xunp->unp_vnode,
(long)xunp->unp_conn, (long)xunp->xu_firstref,
(long)xunp->xu_nextref);
}
if (sa)
xo_emit(" {:path/%.*s}",
1998-07-06 21:01:54 +00:00
(int)(sa->sun_len - offsetof(struct sockaddr_un, sun_path)),
sa->sun_path);
xo_emit("\n");
1994-05-27 12:33:43 +00:00
}