d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
739f70e329
freebsd-skq/sys/conf/options.arm64

26 lines
499 B
Plaintext
Raw Normal View History

Bring in the start of the arm64 kernel. This is only the minimum set of files needed to boot in qemu. As such it is missing a few things. The bus_dma code is currently only stub functions with a full implementation from the development tree to follow. The gic driver has been copied as the interrupt framework is different. It is expected the two drivers will be merged by the arm intrng project, however this will need to be imported into the tree and support for arm64 would need to be added. This includes code developed by myself, SemiHalf, Ed Maste, and Robin Randhawa from ARM. This has been funded by the FreeBSD Foundation, with early development by myself in my spare time with assistance from Robin. Differential Revision: https://reviews.freebsd.org/D2199 Reviewed by: emaste, imp Relnotes: yes Sponsored by: The FreeBSD Foundation
2015-04-13 14:43:10 +00:00
# $FreeBSD$
Apply erratum for mrs ICC_IAR1_EL1 speculative execution on ThunderX ERRATUM: 22978, 23154 PASS (rev.): 1.0/1.1 Reviewed by: imp Obtained from: Semihalf Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D3184
2015-07-31 10:00:45 +00:00
ARM64 opt_global.h
Add support for intrng to arm64. As the GICv3 drivers will need to be updated, and until further testing can be done, this is disabled for now. It is expected arm64 will switch to this interface, and the old interface will be removed before 11.0 is released. Obtained from: ABT Systems Ltd Relnotes: yes Sponsored by: The FreeBSD Foundation
2016-05-16 10:48:51 +00:00
INTRNG opt_global.h
Apply erratum for mrs ICC_IAR1_EL1 speculative execution on ThunderX ERRATUM: 22978, 23154 PASS (rev.): 1.0/1.1 Reviewed by: imp Obtained from: Semihalf Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D3184
2015-07-31 10:00:45 +00:00
SOCDEV_PA opt_global.h
SOCDEV_VA opt_global.h
THUNDERX_PASS_1_1_ERRATA opt_global.h
VFP opt_global.h
Add an option to select which SoCs we are building for. It is intended to be used with any SoC specific drivers, for example a ThunderX nic driver would use something like the following in files.arm64: arm64/cavium/thunder_nic.c optional soc_cavm_thunderx thndr_nic Reviewed by: imp Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D3479
2015-08-26 11:36:23 +00:00
Add rudimentary support for building FreeBSD/arm64 with COMPAT_FREEBSD32. Right now I'm using two Raspberry Pi's (2 and 3) to test CloudABI support for armv6, armv7 and aarch64. It would be nice if I could restrict this to just a single instance when testing smaller changes. This is why I'd like to get COMPAT_CLOUDABI32 to work on arm64. As COMPAT_CLOUDABI32 depends on COMPAT_FREEBSD32, at least for the ELF loading, this change adds all of the bits necessary to at least build a kernel with COMPAT_FREEBSD32. All of the machine dependent system calls are still stubbed out, for the reason that implementations for these are only useful if actual support for running FreeBSD binaries is added. This is outside the scope of this work. Reviewed by: andrew Differential Revision: https://reviews.freebsd.org/D13144
2017-11-24 13:50:53 +00:00
# Binary compatibility
Move most of the contents of opt_compat.h to opt_global.h. opt_compat.h is mentioned in nearly 180 files. In-progress network driver compabibility improvements may add over 100 more so this is closer to "just about everywhere" than "only some files" per the guidance in sys/conf/options. Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h is created on all architectures. Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the set of compiled files. Reviewed by: kib, cem, jhb, jtl Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D14941
2018-04-06 17:35:35 +00:00
COMPAT_FREEBSD32 opt_global.h
Add rudimentary support for building FreeBSD/arm64 with COMPAT_FREEBSD32. Right now I'm using two Raspberry Pi's (2 and 3) to test CloudABI support for armv6, armv7 and aarch64. It would be nice if I could restrict this to just a single instance when testing smaller changes. This is why I'd like to get COMPAT_CLOUDABI32 to work on arm64. As COMPAT_CLOUDABI32 depends on COMPAT_FREEBSD32, at least for the ELF loading, this change adds all of the bits necessary to at least build a kernel with COMPAT_FREEBSD32. All of the machine dependent system calls are still stubbed out, for the reason that implementations for these are only useful if actual support for running FreeBSD binaries is added. This is outside the scope of this work. Reviewed by: andrew Differential Revision: https://reviews.freebsd.org/D13144
2017-11-24 13:50:53 +00:00
Support the EFI Runtime Services on arm64. As with amd64 we use the 1:1 mapping. This uses the new common code shared with amd64. The RTC should only be accessed via EFI. There is no locking around it as the spec only has this as a requirement for the PC-AT CMOS device. Reviewed by: kib, imp Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D12595
2017-10-10 13:05:26 +00:00
# EFI Runtime services support
EFIRT opt_efirt.h
# Devices
Call the PSCI reset from cpu_reset on arm64. When rebooting from DDB the kernel calls this directly so the event handler is not called, meaning the computer fails to reboot. Tested by: cognet MFC after: 1 week Sponsored by: DARPA, AFRL
2017-04-24 11:06:10 +00:00
DEV_PSCI opt_platform.h
Add an option to select which SoCs we are building for. It is intended to be used with any SoC specific drivers, for example a ThunderX nic driver would use something like the following in files.arm64: arm64/cavium/thunder_nic.c optional soc_cavm_thunderx thndr_nic Reviewed by: imp Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D3479
2015-08-26 11:36:23 +00:00
# SoC Support
Add SOC_ALLWINNER_A64 option for Allwinner A64 (sun50i) SoCs.
2016-07-11 20:05:03 +00:00
SOC_ALLWINNER_A64 opt_soc.h
arm64: Add Allwinner H5 SoC Allwinner H5 is an H3 (arm32) with Cortex A53 cores. Add support for it and enable it in GENERIC kernel config Tested on: OrangePi PC2
2017-08-02 20:19:19 +00:00
SOC_ALLWINNER_H5 opt_soc.h
Make BRCM2837 port conform FreeBSD/ARM64 guidelines - Rename SOC_BCM2837 to SOC_BRCM_BCM2837, put it to opt_soc.h - do not use files.XXX files, just move required sources to conf/files.arm64 and make them depend on soc_brcm_bcm2837 Suggested by: andrew
2016-10-14 22:23:03 +00:00
SOC_BRCM_BCM2837 opt_soc.h
Add an option to select which SoCs we are building for. It is intended to be used with any SoC specific drivers, for example a ThunderX nic driver would use something like the following in files.arm64: arm64/cavium/thunder_nic.c optional soc_cavm_thunderx thndr_nic Reviewed by: imp Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D3479
2015-08-26 11:36:23 +00:00
SOC_CAVM_THUNDERX opt_soc.h
Add the SOC_HISI_HI6220 option. This will be used to enable drivers for the HiSilicon hi6220 SoC used in the HiKey 96boards board. Sponsored by: ABT Systems Ltd
2015-08-26 18:09:17 +00:00
SOC_HISI_HI6220 opt_soc.h
rk3328: Add support for this SoC * rk_cru is a cru driver that needs to be subclassed by the real CRU driver * rk_clk_pll handle the pll type clock on RockChip SoC, it's only read only for now. * rk_clk_composite handle the different composite clock types (with gate, with mux etc ...) * rk_clk_gate handle the RockChip gates * rk_clk_mux handle the RockChip muxes (unused for now) * Only clocks for supported devices are supported for now, the rest will be added when driver support comes * The assigned-clock* property are not handled for now so we rely a lot on the bootloader to setup some initial values for some clocks.
2018-02-26 21:25:50 +00:00
SOC_ROCKCHIP_RK3328 opt_soc.h
Reference in New Issue Copy Permalink