freebsd-skq/sys/conf/kmod.mk

372 lines
8.8 KiB
Makefile
Raw Normal View History

# From: @(#)bsd.prog.mk 5.26 (Berkeley) 6/25/91
1999-08-28 00:22:10 +00:00
# $FreeBSD$
#
# The include file <bsd.kmod.mk> handles building and installing loadable
# kernel modules.
#
#
# +++ variables +++
#
# CLEANFILES Additional files to remove for the clean and cleandir targets.
#
# EXPORT_SYMS A list of symbols that should be exported from the module,
# or the name of a file containing a list of symbols, or YES
# to export all symbols. If not defined, no symbols are
# exported.
#
# KMOD The name of the kernel module to build.
#
# KMODDIR Base path for kernel modules (see kld(4)). [/boot/kernel]
#
# KMODOWN Module file owner. [${BINOWN}]
#
# KMODGRP Module file group. [${BINGRP}]
#
# KMODMODE Module file mode. [${BINMODE}]
#
# KMODLOAD Command to load a kernel module [/sbin/kldload]
#
# KMODUNLOAD Command to unload a kernel module [/sbin/kldunload]
#
# MFILES Optionally a list of interfaces used by the module.
# This file contains a default list of interfaces.
#
# PROG The name of the kernel module to build.
# If not supplied, ${KMOD}.ko is used.
#
# SRCS List of source files.
#
# DESTDIR The tree where the module gets installed. [not set]
#
# +++ targets +++
#
# install:
# install the kernel module; if the Makefile
# does not itself define the target install, the targets
# beforeinstall and afterinstall may also be used to cause
# actions immediately before and after the install target
# is executed.
#
# load:
# Load a module.
#
# unload:
# Unload a module.
#
AWK?= awk
KMODLOAD?= /sbin/kldload
KMODUNLOAD?= /sbin/kldunload
OBJCOPY?= objcopy
.if defined(KMODDEPS)
.error "Do not use KMODDEPS on 5.0+; use MODULE_VERSION/MODULE_DEPEND"
.endif
2002-04-22 15:47:11 +00:00
.include <bsd.init.mk>
.SUFFIXES: .out .o .c .cc .cxx .C .y .l .s .S
.if ${CC} == "icc"
CFLAGS:= ${CFLAGS:C/(-x[^M^K^W]+)[MKW]+|-x[MKW]+/\1/}
.endif
CFLAGS+= -D_KERNEL
CFLAGS+= -DKLD_MODULE
# Don't use any standard or source-relative include directories.
# Since -nostdinc will annull any previous -I paths, we repeat all
# such paths after -nostdinc. It doesn't seem to be possible to
# add to the front of `make' variable.
_ICFLAGS:= ${CFLAGS:M-I*}
.if ${CC} == "icc"
NOSTDINC= -X
.else
NOSTDINC= -nostdinc
.endif
CFLAGS+= ${NOSTDINC} -I- ${INCLMAGIC} ${_ICFLAGS}
.if defined(KERNBUILDDIR)
CFLAGS+= -include ${KERNBUILDDIR}/opt_global.h
.endif
# Add -I paths for system headers. Individual module makefiles don't
# need any -I paths for this. Similar defaults for .PATH can't be
# set because there are no standard paths for non-headers.
CFLAGS+= -I. -I@
# Add -I path for altq headers as they are included via net/if_var.h
# for example.
CFLAGS+= -I@/contrib/altq
# Add a -I path to standard headers like <stddef.h>. Use a relative
# path to src/include if possible. If the @ symlink hasn't been built
# yet, then we can't tell if the relative path exists. Add both the
# potential relative path and an absolute path in that case.
.if exists(@)
.if exists(@/../include)
CFLAGS+= -I@/../include
.else
CFLAGS+= -I${DESTDIR}/usr/include
.endif
.else # !@
CFLAGS+= -I@/../include -I${DESTDIR}/usr/include
.endif # @
.if ${CC} != "icc"
CFLAGS+= -finline-limit=${INLINE_LIMIT}
.endif
# Disallow common variables, and if we end up with commons from
# somewhere unexpected, allocate storage for them in the module itself.
.if ${CC} != "icc"
CFLAGS+= -fno-common
.endif
LDFLAGS+= -d -warn-common
CFLAGS+= ${DEBUG_FLAGS}
.if ${MACHINE_ARCH} == amd64
CFLAGS+= -fno-omit-frame-pointer
.endif
OBJS+= ${SRCS:N*.h:R:S/$/.o/g}
.if !defined(PROG)
PROG= ${KMOD}.ko
.endif
.if !defined(DEBUG_FLAGS)
FULLPROG= ${PROG}
.else
FULLPROG= ${PROG}.debug
${PROG}: ${FULLPROG}
${OBJCOPY} --strip-debug ${FULLPROG} ${PROG}
.endif
.if ${MACHINE_ARCH} != amd64
${FULLPROG}: ${KMOD}.kld
${LD} -Bshareable ${LDFLAGS} -o ${.TARGET} ${KMOD}.kld
.if !defined(DEBUG_FLAGS)
${OBJCOPY} --strip-debug ${.TARGET}
.endif
.endif
EXPORT_SYMS?= NO
.if ${EXPORT_SYMS} != YES
CLEANFILES+= export_syms
.endif
.if ${MACHINE_ARCH} != amd64
${KMOD}.kld: ${OBJS}
.else
${FULLPROG}: ${OBJS}
.endif
${LD} ${LDFLAGS} -r -d -o ${.TARGET} ${OBJS}
.if defined(EXPORT_SYMS)
.if ${EXPORT_SYMS} != YES
.if ${EXPORT_SYMS} == NO
touch export_syms
.elif !exists(${.CURDIR}/${EXPORT_SYMS})
echo ${EXPORT_SYMS} > export_syms
.else
grep -v '^#' < ${EXPORT_SYMS} > export_syms
.endif
awk -f ${SYSDIR}/conf/kmod_syms.awk ${.TARGET} \
export_syms | xargs -J% ${OBJCOPY} % ${.TARGET}
.endif
.endif
.if !defined(DEBUG_FLAGS) && ${MACHINE_ARCH} == amd64
${OBJCOPY} --strip-debug ${.TARGET}
.endif
_ILINKS=@ machine
all: objwarn ${PROG}
beforedepend: ${_ILINKS}
# Ensure that the links exist without depending on it when it exists which
# causes all the modules to be rebuilt when the directory pointed to changes.
.for _link in ${_ILINKS}
.if !exists(${.OBJDIR}/${_link})
${OBJS}: ${_link}
.endif
.endfor
# Search for kernel source tree in standard places.
.for _dir in ${.CURDIR}/../.. ${.CURDIR}/../../.. /sys /usr/src/sys
.if !defined(SYSDIR) && exists(${_dir}/kern/)
SYSDIR= ${_dir}
.endif
.endfor
.if !defined(SYSDIR) || !exists(${SYSDIR}/kern/)
.error "can't find kernel source tree"
.endif
${_ILINKS}:
@case ${.TARGET} in \
machine) \
path=${SYSDIR}/${MACHINE_ARCH}/include ;; \
@) \
path=${SYSDIR} ;; \
esac ; \
path=`(cd $$path && /bin/pwd)` ; \
${ECHO} ${.TARGET} "->" $$path ; \
ln -s $$path ${.TARGET}
CLEANFILES+= ${PROG} ${KMOD}.kld ${OBJS} ${_ILINKS}
.if defined(DEBUG_FLAGS)
CLEANFILES+= ${FULLPROG}
.endif
.if !target(install)
_INSTALLFLAGS:= ${INSTALLFLAGS}
.for ie in ${INSTALLFLAGS_EDIT}
_INSTALLFLAGS:= ${_INSTALLFLAGS${ie}}
.endfor
.if !target(install.debug) && defined(DEBUG_FLAGS)
install.debug:
cd ${.CURDIR}; ${MAKE} -DINSTALL_DEBUG install
.endif
.if !target(realinstall)
realinstall: _kmodinstall
.ORDER: beforeinstall _kmodinstall
_kmodinstall:
.if defined(DEBUG_FLAGS) && defined(INSTALL_DEBUG)
${INSTALL} -o ${KMODOWN} -g ${KMODGRP} -m ${KMODMODE} \
${_INSTALLFLAGS} ${FULLPROG} ${DESTDIR}${KMODDIR}
.else
${INSTALL} -o ${KMODOWN} -g ${KMODGRP} -m ${KMODMODE} \
${_INSTALLFLAGS} ${PROG} ${DESTDIR}${KMODDIR}
.include <bsd.links.mk>
2003-01-21 05:52:48 +00:00
.if !defined(NO_XREF)
afterinstall: _kldxref
.ORDER: realinstall _kldxref
.ORDER: _installlinks _kldxref
_kldxref:
@if type kldxref >/dev/null 2>&1; then \
${ECHO} kldxref ${DESTDIR}${KMODDIR}; \
kldxref ${DESTDIR}${KMODDIR}; \
fi
.endif
.endif
.endif !target(realinstall)
.endif !target(install)
.if !target(load)
load: ${PROG}
${KMODLOAD} -v ${.OBJDIR}/${PROG}
.endif
.if !target(unload)
unload:
${KMODUNLOAD} -v ${PROG}
.endif
.if defined(KERNBUILDDIR)
.PATH: ${KERNBUILDDIR}
CFLAGS+= -I${KERNBUILDDIR}
.for _src in ${SRCS:Mopt_*.h}
CLEANFILES+= ${_src}
.if !target(${_src})
${_src}:
ln -s ${KERNBUILDDIR}/${_src} ${.TARGET}
.endif
.endfor
.else
.for _src in ${SRCS:Mopt_*.h}
CLEANFILES+= ${_src}
.if !target(${_src})
${_src}:
touch ${.TARGET}
.endif
.endfor
.endif
MFILES?= kern/bus_if.m kern/device_if.m dev/iicbus/iicbb_if.m \
dev/iicbus/iicbus_if.m isa/isa_if.m \
libkern/iconv_converter_if.m \
dev/acpica/acpi_if.m dev/eisa/eisa_if.m dev/mii/miibus_if.m \
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
dev/ofw/ofw_bus_if.m \
dev/pccard/card_if.m dev/pccard/power_if.m dev/pci/pci_if.m \
dev/pci/pcib_if.m dev/ppbus/ppbus_if.m dev/smbus/smbus_if.m \
dev/usb/usb_if.m dev/sound/pcm/ac97_if.m dev/sound/pcm/channel_if.m \
dev/sound/pcm/feeder_if.m dev/sound/pcm/mixer_if.m pci/agp_if.m \
opencrypto/crypto_if.m pc98/pc98/canbus_if.m dev/uart/uart_if.m \
sparc64/pci/ofw_pci_if.m
.for _srcsrc in ${MFILES}
.for _ext in c h
.for _src in ${SRCS:M${_srcsrc:T:R}.${_ext}}
CLEANFILES+= ${_src}
.if !target(${_src})
.if !exists(@)
${_src}: @
.endif
.if exists(@)
${_src}: @/tools/makeobjops.awk @/${_srcsrc}
.endif
${AWK} -f @/tools/makeobjops.awk @/${_srcsrc} -${_ext}
.endif
.endfor # _src
.endfor # _ext
.endfor # _srcsrc
.for _ext in c h
.if ${SRCS:Mvnode_if.${_ext}} != ""
CLEANFILES+= vnode_if.${_ext}
.if !exists(@)
vnode_if.${_ext}: @
.endif
.if exists(@)
vnode_if.${_ext}: @/tools/vnode_if.awk @/kern/vnode_if.src
.endif
${AWK} -f @/tools/vnode_if.awk @/kern/vnode_if.src -${_ext}
.endif
.endfor
.for _i in mii pccard usb
.if ${SRCS:M${_i}devs.h} != ""
CLEANFILES+= ${_i}devs.h
_i= ${_i:Musb}
.if !empty(_i)
CLEANFILES+= ${_i}devs_data.h
.endif
.if !exists(@)
${_i}devs.h: @
.endif
.if exists(@)
${_i}devs.h: @/tools/${_i}devs2h.awk @/dev/${_i}/${_i}devs
.endif
${AWK} -f @/tools/${_i}devs2h.awk @/dev/${_i}/${_i}devs
.endif
.endfor # _i
.if ${SRCS:Macpi_quirks.h} != ""
CLEANFILES+= acpi_quirks.h
.if !exists(@)
acpi_quirks.h: @
.endif
.if exists(@)
acpi_quirks.h: @/tools/acpi_quirks2h.awk @/dev/acpica/acpi_quirks
.endif
${AWK} -f @/tools/acpi_quirks2h.awk @/dev/acpica/acpi_quirks
.endif
lint: ${SRCS}
${LINT} ${LINTKERNFLAGS} ${CFLAGS:M-[DILU]*} ${.ALLSRC:M*.c}
1996-06-30 22:16:19 +00:00
.include <bsd.dep.mk>
.if !exists(${.OBJDIR}/${DEPENDFILE})
${OBJS}: ${SRCS:M*.h}
.endif
.include <bsd.obj.mk>
.include "kern.mk"