freebsd-skq/sys/dev/mpr/mpr_sas.h

180 lines
5.3 KiB
C
Raw Normal View History

/*-
The wrong commit message was given with r283632. This is the correct message. - Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 9.255.01.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 1 week
2015-05-28 18:24:22 +00:00
* Copyright (c) 2011-2015 LSI Corp.
* Copyright (c) 2013-2016 Avago Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
The wrong commit message was given with r283632. This is the correct message. - Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 9.255.01.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 1 week
2015-05-28 18:24:22 +00:00
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
*
* $FreeBSD$
*/
struct mpr_fw_event_work;
struct mprsas_lun {
SLIST_ENTRY(mprsas_lun) lun_link;
lun_id_t lun_id;
uint8_t eedp_formatted;
uint32_t eedp_block_size;
};
struct mprsas_target {
uint16_t handle;
uint8_t linkrate;
uint8_t encl_level_valid;
uint8_t encl_level;
char connector_name[4];
uint64_t devname;
uint32_t devinfo;
uint16_t encl_handle;
uint16_t encl_slot;
uint8_t flags;
#define MPRSAS_TARGET_INABORT (1 << 0)
#define MPRSAS_TARGET_INRESET (1 << 1)
#define MPRSAS_TARGET_INDIAGRESET (1 << 2)
#define MPRSAS_TARGET_INREMOVAL (1 << 3)
#define MPR_TARGET_FLAGS_RAID_COMPONENT (1 << 4)
#define MPR_TARGET_FLAGS_VOLUME (1 << 5)
The wrong commit message was given with r283632. This is the correct message. - Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 9.255.01.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 1 week
2015-05-28 18:24:22 +00:00
#define MPR_TARGET_IS_SATA_SSD (1 << 6)
#define MPRSAS_TARGET_INRECOVERY (MPRSAS_TARGET_INABORT | \
MPRSAS_TARGET_INRESET | MPRSAS_TARGET_INCHIPRESET)
uint16_t tid;
SLIST_HEAD(, mprsas_lun) luns;
TAILQ_HEAD(, mpr_command) commands;
struct mpr_command *tm;
TAILQ_HEAD(, mpr_command) timedout_commands;
uint16_t exp_dev_handle;
uint16_t phy_num;
uint64_t sasaddr;
uint16_t parent_handle;
uint64_t parent_sasaddr;
uint32_t parent_devinfo;
struct sysctl_ctx_list sysctl_ctx;
struct sysctl_oid *sysctl_tree;
TAILQ_ENTRY(mprsas_target) sysctl_link;
uint64_t issued;
uint64_t completed;
unsigned int outstanding;
unsigned int timeouts;
unsigned int aborts;
unsigned int logical_unit_resets;
unsigned int target_resets;
uint8_t scsi_req_desc_type;
The wrong commit message was given with r283632. This is the correct message. - Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 9.255.01.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 1 week
2015-05-28 18:24:22 +00:00
uint8_t stop_at_shutdown;
uint8_t supports_SSU;
};
struct mprsas_softc {
struct mpr_softc *sc;
u_int flags;
#define MPRSAS_IN_DISCOVERY (1 << 0)
#define MPRSAS_IN_STARTUP (1 << 1)
#define MPRSAS_DISCOVERY_TIMEOUT_PENDING (1 << 2)
#define MPRSAS_QUEUE_FROZEN (1 << 3)
#define MPRSAS_SHUTDOWN (1 << 4)
u_int maxtargets;
struct mprsas_target *targets;
struct cam_devq *devq;
struct cam_sim *sim;
struct cam_path *path;
struct intr_config_hook sas_ich;
struct callout discovery_callout;
struct mpr_event_handle *mprsas_eh;
u_int startup_refcount;
struct proc *sysctl_proc;
struct taskqueue *ev_tq;
struct task ev_task;
TAILQ_HEAD(, mpr_fw_event_work) ev_queue;
};
MALLOC_DECLARE(M_MPRSAS);
/*
* Abstracted so that the driver can be backwards and forwards compatible
* with future versions of CAM that will provide this functionality.
*/
#define MPR_SET_LUN(lun, ccblun) \
mprsas_set_lun(lun, ccblun)
static __inline int
mprsas_set_lun(uint8_t *lun, u_int ccblun)
{
uint64_t *newlun;
newlun = (uint64_t *)lun;
*newlun = 0;
if (ccblun <= 0xff) {
/* Peripheral device address method, LUN is 0 to 255 */
lun[1] = ccblun;
} else if (ccblun <= 0x3fff) {
/* Flat space address method, LUN is <= 16383 */
scsi_ulto2b(ccblun, lun);
lun[0] |= 0x40;
} else if (ccblun <= 0xffffff) {
/* Extended flat space address method, LUN is <= 16777215 */
scsi_ulto3b(ccblun, &lun[1]);
/* Extended Flat space address method */
lun[0] = 0xc0;
/* Length = 1, i.e. LUN is 3 bytes long */
lun[0] |= 0x10;
/* Extended Address Method */
lun[0] |= 0x02;
} else {
return (EINVAL);
}
return (0);
}
The wrong commit message was given with r283632. This is the correct message. - Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 9.255.01.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 1 week
2015-05-28 18:24:22 +00:00
static __inline void
mprsas_set_ccbstatus(union ccb *ccb, int status)
{
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= status;
}
static __inline int
mprsas_get_ccbstatus(union ccb *ccb)
{
return (ccb->ccb_h.status & CAM_STATUS_MASK);
}
#define MPR_SET_SINGLE_LUN(req, lun) \
do { \
bzero((req)->LUN, 8); \
(req)->LUN[1] = lun; \
} while(0)
void mprsas_rescan_target(struct mpr_softc *sc, struct mprsas_target *targ);
void mprsas_discovery_end(struct mprsas_softc *sassc);
The wrong commit message was given with r283632. This is the correct message. - Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 9.255.01.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 1 week
2015-05-28 18:24:22 +00:00
void mprsas_prepare_for_tm(struct mpr_softc *sc, struct mpr_command *tm,
struct mprsas_target *target, lun_id_t lun_id);
void mprsas_startup_increment(struct mprsas_softc *sassc);
void mprsas_startup_decrement(struct mprsas_softc *sassc);
void mprsas_firmware_event_work(void *arg, int pending);
int mprsas_check_id(struct mprsas_softc *sassc, int id);