freebsd-skq/sys/dev/twa/tw_osl_freebsd.c

1713 lines
46 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004-07 Applied Micro Circuits Corporation.
* Copyright (c) 2004-05 Vinod Kashyap.
* Copyright (c) 2000 Michael Smith
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* AMCC'S 3ware driver for 9000 series storage controllers.
*
* Author: Vinod Kashyap
* Modifications by: Adam Radford
* Modifications by: Manjunath Ranganathaiah
*/
/*
* FreeBSD specific functions not related to CAM, and other
* miscellaneous functions.
*/
#include <dev/twa/tw_osl_includes.h>
#include <dev/twa/tw_cl_fwif.h>
#include <dev/twa/tw_cl_ioctl.h>
#include <dev/twa/tw_osl_ioctl.h>
#ifdef TW_OSL_DEBUG
TW_INT32 TW_DEBUG_LEVEL_FOR_OSL = TW_OSL_DEBUG;
TW_INT32 TW_OSL_DEBUG_LEVEL_FOR_CL = TW_OSL_DEBUG;
#endif /* TW_OSL_DEBUG */
static MALLOC_DEFINE(TW_OSLI_MALLOC_CLASS, "twa_commands", "twa commands");
static d_open_t twa_open;
static d_close_t twa_close;
static d_ioctl_t twa_ioctl;
static struct cdevsw twa_cdevsw = {
.d_version = D_VERSION,
.d_open = twa_open,
.d_close = twa_close,
.d_ioctl = twa_ioctl,
.d_name = "twa",
};
static devclass_t twa_devclass;
/*
* Function name: twa_open
* Description: Called when the controller is opened.
* Simply marks the controller as open.
*
* Input: dev -- control device corresponding to the ctlr
* flags -- mode of open
* fmt -- device type (character/block etc.)
* proc -- current process
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
twa_open(struct cdev *dev, TW_INT32 flags, TW_INT32 fmt, struct thread *proc)
{
struct twa_softc *sc = (struct twa_softc *)(dev->si_drv1);
tw_osli_dbg_dprintf(5, sc, "entered");
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
sc->open = TW_CL_TRUE;
return(0);
}
/*
* Function name: twa_close
* Description: Called when the controller is closed.
* Simply marks the controller as not open.
*
* Input: dev -- control device corresponding to the ctlr
* flags -- mode of corresponding open
* fmt -- device type (character/block etc.)
* proc -- current process
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
twa_close(struct cdev *dev, TW_INT32 flags, TW_INT32 fmt, struct thread *proc)
{
struct twa_softc *sc = (struct twa_softc *)(dev->si_drv1);
tw_osli_dbg_dprintf(5, sc, "entered");
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
sc->open = TW_CL_FALSE;
return(0);
}
/*
* Function name: twa_ioctl
* Description: Called when an ioctl is posted to the controller.
* Handles any OS Layer specific cmds, passes the rest
* on to the Common Layer.
*
* Input: dev -- control device corresponding to the ctlr
* cmd -- ioctl cmd
* buf -- ptr to buffer in kernel memory, which is
* a copy of the input buffer in user-space
* flags -- mode of corresponding open
* proc -- current process
* Output: buf -- ptr to buffer in kernel memory, which will
* be copied to the output buffer in user-space
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
twa_ioctl(struct cdev *dev, u_long cmd, caddr_t buf, TW_INT32 flags, struct thread *proc)
{
struct twa_softc *sc = (struct twa_softc *)(dev->si_drv1);
TW_INT32 error;
tw_osli_dbg_dprintf(5, sc, "entered");
switch (cmd) {
case TW_OSL_IOCTL_FIRMWARE_PASS_THROUGH:
tw_osli_dbg_dprintf(6, sc, "ioctl: fw_passthru");
error = tw_osli_fw_passthru(sc, (TW_INT8 *)buf);
break;
case TW_OSL_IOCTL_SCAN_BUS:
/* Request CAM for a bus scan. */
tw_osli_dbg_dprintf(6, sc, "ioctl: scan bus");
error = tw_osli_request_bus_scan(sc);
break;
default:
tw_osli_dbg_dprintf(6, sc, "ioctl: 0x%lx", cmd);
error = tw_cl_ioctl(&sc->ctlr_handle, cmd, buf);
break;
}
return(error);
}
static TW_INT32 twa_probe(device_t dev);
static TW_INT32 twa_attach(device_t dev);
static TW_INT32 twa_detach(device_t dev);
static TW_INT32 twa_shutdown(device_t dev);
static TW_VOID twa_busdma_lock(TW_VOID *lock_arg, bus_dma_lock_op_t op);
static TW_VOID twa_pci_intr(TW_VOID *arg);
static TW_VOID twa_watchdog(TW_VOID *arg);
int twa_setup_intr(struct twa_softc *sc);
int twa_teardown_intr(struct twa_softc *sc);
static TW_INT32 tw_osli_alloc_mem(struct twa_softc *sc);
static TW_VOID tw_osli_free_resources(struct twa_softc *sc);
static TW_VOID twa_map_load_data_callback(TW_VOID *arg,
bus_dma_segment_t *segs, TW_INT32 nsegments, TW_INT32 error);
static TW_VOID twa_map_load_callback(TW_VOID *arg,
bus_dma_segment_t *segs, TW_INT32 nsegments, TW_INT32 error);
static device_method_t twa_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, twa_probe),
DEVMETHOD(device_attach, twa_attach),
DEVMETHOD(device_detach, twa_detach),
DEVMETHOD(device_shutdown, twa_shutdown),
DEVMETHOD_END
};
static driver_t twa_pci_driver = {
"twa",
twa_methods,
sizeof(struct twa_softc)
};
DRIVER_MODULE(twa, pci, twa_pci_driver, twa_devclass, 0, 0);
MODULE_DEPEND(twa, cam, 1, 1, 1);
MODULE_DEPEND(twa, pci, 1, 1, 1);
/*
* Function name: twa_probe
* Description: Called at driver load time. Claims 9000 ctlrs.
*
* Input: dev -- bus device corresponding to the ctlr
* Output: None
* Return value: <= 0 -- success
* > 0 -- failure
*/
static TW_INT32
twa_probe(device_t dev)
{
static TW_UINT8 first_ctlr = 1;
tw_osli_dbg_printf(3, "entered");
if (tw_cl_ctlr_supported(pci_get_vendor(dev), pci_get_device(dev))) {
device_set_desc(dev, TW_OSLI_DEVICE_NAME);
/* Print the driver version only once. */
if (first_ctlr) {
printf("3ware device driver for 9000 series storage "
"controllers, version: %s\n",
TW_OSL_DRIVER_VERSION_STRING);
first_ctlr = 0;
}
return(0);
}
return(ENXIO);
}
int twa_setup_intr(struct twa_softc *sc)
{
int error = 0;
if (!(sc->intr_handle) && (sc->irq_res)) {
error = bus_setup_intr(sc->bus_dev, sc->irq_res,
INTR_TYPE_CAM | INTR_MPSAFE,
NULL, twa_pci_intr,
sc, &sc->intr_handle);
}
return( error );
}
int twa_teardown_intr(struct twa_softc *sc)
{
int error = 0;
if ((sc->intr_handle) && (sc->irq_res)) {
error = bus_teardown_intr(sc->bus_dev,
sc->irq_res, sc->intr_handle);
sc->intr_handle = NULL;
}
return( error );
}
/*
* Function name: twa_attach
* Description: Allocates pci resources; updates sc; adds a node to the
* sysctl tree to expose the driver version; makes calls
* (to the Common Layer) to initialize ctlr, and to
* attach to CAM.
*
* Input: dev -- bus device corresponding to the ctlr
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
twa_attach(device_t dev)
{
struct twa_softc *sc = device_get_softc(dev);
TW_INT32 bar_num;
TW_INT32 bar0_offset;
TW_INT32 bar_size;
TW_INT32 error;
tw_osli_dbg_dprintf(3, sc, "entered");
sc->ctlr_handle.osl_ctlr_ctxt = sc;
/* Initialize the softc structure. */
sc->bus_dev = dev;
sc->device_id = pci_get_device(dev);
/* Initialize the mutexes right here. */
sc->io_lock = &(sc->io_lock_handle);
mtx_init(sc->io_lock, "tw_osl_io_lock", NULL, MTX_SPIN);
sc->q_lock = &(sc->q_lock_handle);
mtx_init(sc->q_lock, "tw_osl_q_lock", NULL, MTX_SPIN);
sc->sim_lock = &(sc->sim_lock_handle);
mtx_init(sc->sim_lock, "tw_osl_sim_lock", NULL, MTX_DEF | MTX_RECURSE);
sysctl_ctx_init(&sc->sysctl_ctxt);
sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctxt,
SYSCTL_STATIC_CHILDREN(_hw), OID_AUTO,
device_get_nameunit(dev), CTLFLAG_RD, 0, "");
if (sc->sysctl_tree == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2000,
"Cannot add sysctl tree node",
ENXIO);
return(ENXIO);
}
SYSCTL_ADD_STRING(&sc->sysctl_ctxt, SYSCTL_CHILDREN(sc->sysctl_tree),
OID_AUTO, "driver_version", CTLFLAG_RD,
TW_OSL_DRIVER_VERSION_STRING, 0, "TWA driver version");
/* Force the busmaster enable bit on, in case the BIOS forgot. */
pci_enable_busmaster(dev);
/* Allocate the PCI register window. */
if ((error = tw_cl_get_pci_bar_info(sc->device_id, TW_CL_BAR_TYPE_MEM,
&bar_num, &bar0_offset, &bar_size))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x201F,
"Can't get PCI BAR info",
error);
tw_osli_free_resources(sc);
return(error);
}
sc->reg_res_id = PCIR_BARS + bar0_offset;
if ((sc->reg_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&(sc->reg_res_id), RF_ACTIVE))
== NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2002,
"Can't allocate register window",
ENXIO);
tw_osli_free_resources(sc);
return(ENXIO);
}
sc->bus_tag = rman_get_bustag(sc->reg_res);
sc->bus_handle = rman_get_bushandle(sc->reg_res);
/* Allocate and register our interrupt. */
sc->irq_res_id = 0;
if ((sc->irq_res = bus_alloc_resource_any(sc->bus_dev, SYS_RES_IRQ,
&(sc->irq_res_id),
RF_SHAREABLE | RF_ACTIVE)) == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2003,
"Can't allocate interrupt",
ENXIO);
tw_osli_free_resources(sc);
return(ENXIO);
}
if ((error = twa_setup_intr(sc))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2004,
"Can't set up interrupt",
error);
tw_osli_free_resources(sc);
return(error);
}
if ((error = tw_osli_alloc_mem(sc))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2005,
"Memory allocation failure",
error);
tw_osli_free_resources(sc);
return(error);
}
/* Initialize the Common Layer for this controller. */
if ((error = tw_cl_init_ctlr(&sc->ctlr_handle, sc->flags, sc->device_id,
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
TW_OSLI_MAX_NUM_REQUESTS, TW_OSLI_MAX_NUM_AENS,
sc->non_dma_mem, sc->dma_mem,
sc->dma_mem_phys
))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2006,
"Failed to initialize Common Layer/controller",
error);
tw_osli_free_resources(sc);
return(error);
}
/* Create the control device. */
sc->ctrl_dev = make_dev(&twa_cdevsw, device_get_unit(sc->bus_dev),
UID_ROOT, GID_OPERATOR, S_IRUSR | S_IWUSR,
"twa%d", device_get_unit(sc->bus_dev));
sc->ctrl_dev->si_drv1 = sc;
if ((error = tw_osli_cam_attach(sc))) {
tw_osli_free_resources(sc);
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2007,
"Failed to initialize CAM",
error);
return(error);
}
sc->watchdog_index = 0;
callout_init(&(sc->watchdog_callout[0]), 1);
callout_init(&(sc->watchdog_callout[1]), 1);
callout_reset(&(sc->watchdog_callout[0]), 5*hz, twa_watchdog, &sc->ctlr_handle);
return(0);
}
static TW_VOID
twa_watchdog(TW_VOID *arg)
{
struct tw_cl_ctlr_handle *ctlr_handle =
(struct tw_cl_ctlr_handle *)arg;
struct twa_softc *sc = ctlr_handle->osl_ctlr_ctxt;
int i;
int i_need_a_reset = 0;
int driver_is_active = 0;
int my_watchdog_was_pending = 1234;
TW_UINT64 current_time;
struct tw_osli_req_context *my_req;
//==============================================================================
current_time = (TW_UINT64) (tw_osl_get_local_time());
for (i = 0; i < TW_OSLI_MAX_NUM_REQUESTS; i++) {
my_req = &(sc->req_ctx_buf[i]);
if ((my_req->state == TW_OSLI_REQ_STATE_BUSY) &&
(my_req->deadline) &&
(my_req->deadline < current_time)) {
tw_cl_set_reset_needed(ctlr_handle);
#ifdef TW_OSL_DEBUG
device_printf((sc)->bus_dev, "Request %d timed out! d = %llu, c = %llu\n", i, my_req->deadline, current_time);
#else /* TW_OSL_DEBUG */
device_printf((sc)->bus_dev, "Request %d timed out!\n", i);
#endif /* TW_OSL_DEBUG */
break;
}
}
//==============================================================================
i_need_a_reset = tw_cl_is_reset_needed(ctlr_handle);
i = (int) ((sc->watchdog_index++) & 1);
driver_is_active = tw_cl_is_active(ctlr_handle);
if (i_need_a_reset) {
#ifdef TW_OSL_DEBUG
device_printf((sc)->bus_dev, "Watchdog rescheduled in 70 seconds\n");
#endif /* TW_OSL_DEBUG */
my_watchdog_was_pending =
callout_reset(&(sc->watchdog_callout[i]), 70*hz, twa_watchdog, &sc->ctlr_handle);
tw_cl_reset_ctlr(ctlr_handle);
#ifdef TW_OSL_DEBUG
device_printf((sc)->bus_dev, "Watchdog reset completed!\n");
#endif /* TW_OSL_DEBUG */
} else if (driver_is_active) {
my_watchdog_was_pending =
callout_reset(&(sc->watchdog_callout[i]), 5*hz, twa_watchdog, &sc->ctlr_handle);
}
#ifdef TW_OSL_DEBUG
if (i_need_a_reset || my_watchdog_was_pending)
device_printf((sc)->bus_dev, "i_need_a_reset = %d, "
"driver_is_active = %d, my_watchdog_was_pending = %d\n",
i_need_a_reset, driver_is_active, my_watchdog_was_pending);
#endif /* TW_OSL_DEBUG */
}
/*
* Function name: tw_osli_alloc_mem
* Description: Allocates memory needed both by CL and OSL.
*
* Input: sc -- OSL internal controller context
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
tw_osli_alloc_mem(struct twa_softc *sc)
{
struct tw_osli_req_context *req;
TW_UINT32 max_sg_elements;
TW_UINT32 non_dma_mem_size;
TW_UINT32 dma_mem_size;
TW_INT32 error;
TW_INT32 i;
tw_osli_dbg_dprintf(3, sc, "entered");
sc->flags |= (sizeof(bus_addr_t) == 8) ? TW_CL_64BIT_ADDRESSES : 0;
sc->flags |= (sizeof(bus_size_t) == 8) ? TW_CL_64BIT_SG_LENGTH : 0;
max_sg_elements = (sizeof(bus_addr_t) == 8) ?
TW_CL_MAX_64BIT_SG_ELEMENTS : TW_CL_MAX_32BIT_SG_ELEMENTS;
if ((error = tw_cl_get_mem_requirements(&sc->ctlr_handle, sc->flags,
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
sc->device_id, TW_OSLI_MAX_NUM_REQUESTS, TW_OSLI_MAX_NUM_AENS,
&(sc->alignment), &(sc->sg_size_factor),
&non_dma_mem_size, &dma_mem_size
))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2008,
"Can't get Common Layer's memory requirements",
error);
return(error);
}
if ((sc->non_dma_mem = malloc(non_dma_mem_size, TW_OSLI_MALLOC_CLASS,
M_WAITOK)) == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2009,
"Can't allocate non-dma memory",
ENOMEM);
return(ENOMEM);
}
/* Create the parent dma tag. */
if (bus_dma_tag_create(bus_get_dma_tag(sc->bus_dev), /* parent */
sc->alignment, /* alignment */
0, /* boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
TW_CL_MAX_IO_SIZE, /* maxsize */
max_sg_elements, /* nsegments */
TW_CL_MAX_IO_SIZE, /* maxsegsize */
0, /* flags */
NULL, /* lockfunc */
NULL, /* lockfuncarg */
&sc->parent_tag /* tag */)) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x200A,
"Can't allocate parent DMA tag",
ENOMEM);
return(ENOMEM);
}
/* Create a dma tag for Common Layer's DMA'able memory (dma_mem). */
if (bus_dma_tag_create(sc->parent_tag, /* parent */
sc->alignment, /* alignment */
0, /* boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
dma_mem_size, /* maxsize */
1, /* nsegments */
BUS_SPACE_MAXSIZE, /* maxsegsize */
0, /* flags */
NULL, /* lockfunc */
NULL, /* lockfuncarg */
&sc->cmd_tag /* tag */)) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x200B,
"Can't allocate DMA tag for Common Layer's "
"DMA'able memory",
ENOMEM);
return(ENOMEM);
}
if (bus_dmamem_alloc(sc->cmd_tag, &sc->dma_mem,
BUS_DMA_NOWAIT, &sc->cmd_map)) {
/* Try a second time. */
if (bus_dmamem_alloc(sc->cmd_tag, &sc->dma_mem,
BUS_DMA_NOWAIT, &sc->cmd_map)) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x200C,
"Can't allocate DMA'able memory for the"
"Common Layer",
ENOMEM);
return(ENOMEM);
}
}
bus_dmamap_load(sc->cmd_tag, sc->cmd_map, sc->dma_mem,
dma_mem_size, twa_map_load_callback,
&sc->dma_mem_phys, 0);
/*
* Create a dma tag for data buffers; size will be the maximum
* possible I/O size (128kB).
*/
if (bus_dma_tag_create(sc->parent_tag, /* parent */
sc->alignment, /* alignment */
0, /* boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
TW_CL_MAX_IO_SIZE, /* maxsize */
max_sg_elements, /* nsegments */
TW_CL_MAX_IO_SIZE, /* maxsegsize */
BUS_DMA_ALLOCNOW, /* flags */
twa_busdma_lock, /* lockfunc */
sc->io_lock, /* lockfuncarg */
&sc->dma_tag /* tag */)) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x200F,
"Can't allocate DMA tag for data buffers",
ENOMEM);
return(ENOMEM);
}
/*
* Create a dma tag for ioctl data buffers; size will be the maximum
* possible I/O size (128kB).
*/
if (bus_dma_tag_create(sc->parent_tag, /* parent */
sc->alignment, /* alignment */
0, /* boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
TW_CL_MAX_IO_SIZE, /* maxsize */
max_sg_elements, /* nsegments */
TW_CL_MAX_IO_SIZE, /* maxsegsize */
BUS_DMA_ALLOCNOW, /* flags */
twa_busdma_lock, /* lockfunc */
sc->io_lock, /* lockfuncarg */
&sc->ioctl_tag /* tag */)) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2010,
"Can't allocate DMA tag for ioctl data buffers",
ENOMEM);
return(ENOMEM);
}
/* Create just one map for all ioctl request data buffers. */
if (bus_dmamap_create(sc->ioctl_tag, 0, &sc->ioctl_map)) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2011,
"Can't create ioctl map",
ENOMEM);
return(ENOMEM);
}
/* Initialize request queues. */
tw_osli_req_q_init(sc, TW_OSLI_FREE_Q);
tw_osli_req_q_init(sc, TW_OSLI_BUSY_Q);
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
if ((sc->req_ctx_buf = (struct tw_osli_req_context *)
malloc((sizeof(struct tw_osli_req_context) *
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
TW_OSLI_MAX_NUM_REQUESTS),
TW_OSLI_MALLOC_CLASS, M_WAITOK)) == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2012,
"Failed to allocate request packets",
ENOMEM);
return(ENOMEM);
}
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
bzero(sc->req_ctx_buf,
sizeof(struct tw_osli_req_context) * TW_OSLI_MAX_NUM_REQUESTS);
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
for (i = 0; i < TW_OSLI_MAX_NUM_REQUESTS; i++) {
req = &(sc->req_ctx_buf[i]);
req->ctlr = sc;
if (bus_dmamap_create(sc->dma_tag, 0, &req->dma_map)) {
tw_osli_printf(sc, "request # = %d, error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2013,
"Can't create dma map",
i, ENOMEM);
return(ENOMEM);
}
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
/* Initialize the ioctl wakeup/ timeout mutex */
req->ioctl_wake_timeout_lock = &(req->ioctl_wake_timeout_lock_handle);
mtx_init(req->ioctl_wake_timeout_lock, "tw_ioctl_wake_timeout_lock", NULL, MTX_DEF);
/* Insert request into the free queue. */
tw_osli_req_q_insert_tail(req, TW_OSLI_FREE_Q);
}
return(0);
}
/*
* Function name: tw_osli_free_resources
* Description: Performs clean-up at the time of going down.
*
* Input: sc -- ptr to OSL internal ctlr context
* Output: None
* Return value: None
*/
static TW_VOID
tw_osli_free_resources(struct twa_softc *sc)
{
struct tw_osli_req_context *req;
TW_INT32 error = 0;
tw_osli_dbg_dprintf(3, sc, "entered");
/* Detach from CAM */
tw_osli_cam_detach(sc);
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
if (sc->req_ctx_buf)
while ((req = tw_osli_req_q_remove_head(sc, TW_OSLI_FREE_Q)) !=
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
NULL) {
mtx_destroy(req->ioctl_wake_timeout_lock);
if ((error = bus_dmamap_destroy(sc->dma_tag,
req->dma_map)))
tw_osli_dbg_dprintf(1, sc,
"dmamap_destroy(dma) returned %d",
error);
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
}
if ((sc->ioctl_tag) && (sc->ioctl_map))
if ((error = bus_dmamap_destroy(sc->ioctl_tag, sc->ioctl_map)))
tw_osli_dbg_dprintf(1, sc,
"dmamap_destroy(ioctl) returned %d", error);
/* Free all memory allocated so far. */
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
if (sc->req_ctx_buf)
free(sc->req_ctx_buf, TW_OSLI_MALLOC_CLASS);
if (sc->non_dma_mem)
free(sc->non_dma_mem, TW_OSLI_MALLOC_CLASS);
if (sc->dma_mem) {
bus_dmamap_unload(sc->cmd_tag, sc->cmd_map);
bus_dmamem_free(sc->cmd_tag, sc->dma_mem,
sc->cmd_map);
}
if (sc->cmd_tag)
if ((error = bus_dma_tag_destroy(sc->cmd_tag)))
tw_osli_dbg_dprintf(1, sc,
"dma_tag_destroy(cmd) returned %d", error);
if (sc->dma_tag)
if ((error = bus_dma_tag_destroy(sc->dma_tag)))
tw_osli_dbg_dprintf(1, sc,
"dma_tag_destroy(dma) returned %d", error);
if (sc->ioctl_tag)
if ((error = bus_dma_tag_destroy(sc->ioctl_tag)))
tw_osli_dbg_dprintf(1, sc,
"dma_tag_destroy(ioctl) returned %d", error);
if (sc->parent_tag)
if ((error = bus_dma_tag_destroy(sc->parent_tag)))
tw_osli_dbg_dprintf(1, sc,
"dma_tag_destroy(parent) returned %d", error);
/* Disconnect the interrupt handler. */
if ((error = twa_teardown_intr(sc)))
tw_osli_dbg_dprintf(1, sc,
"teardown_intr returned %d", error);
if (sc->irq_res != NULL)
if ((error = bus_release_resource(sc->bus_dev,
SYS_RES_IRQ, sc->irq_res_id, sc->irq_res)))
tw_osli_dbg_dprintf(1, sc,
"release_resource(irq) returned %d", error);
/* Release the register window mapping. */
if (sc->reg_res != NULL)
if ((error = bus_release_resource(sc->bus_dev,
SYS_RES_MEMORY, sc->reg_res_id, sc->reg_res)))
tw_osli_dbg_dprintf(1, sc,
"release_resource(io) returned %d", error);
/* Destroy the control device. */
if (sc->ctrl_dev != (struct cdev *)NULL)
destroy_dev(sc->ctrl_dev);
if ((error = sysctl_ctx_free(&sc->sysctl_ctxt)))
tw_osli_dbg_dprintf(1, sc,
"sysctl_ctx_free returned %d", error);
}
/*
* Function name: twa_detach
* Description: Called when the controller is being detached from
* the pci bus.
*
* Input: dev -- bus device corresponding to the ctlr
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
twa_detach(device_t dev)
{
struct twa_softc *sc = device_get_softc(dev);
TW_INT32 error;
tw_osli_dbg_dprintf(3, sc, "entered");
error = EBUSY;
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
if (sc->open) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2014,
"Device open",
error);
goto out;
}
/* Shut the controller down. */
if ((error = twa_shutdown(dev)))
goto out;
/* Free all resources associated with this controller. */
tw_osli_free_resources(sc);
error = 0;
out:
return(error);
}
/*
* Function name: twa_shutdown
* Description: Called at unload/shutdown time. Lets the controller
* know that we are going down.
*
* Input: dev -- bus device corresponding to the ctlr
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
twa_shutdown(device_t dev)
{
struct twa_softc *sc = device_get_softc(dev);
TW_INT32 error = 0;
tw_osli_dbg_dprintf(3, sc, "entered");
/* Disconnect interrupts. */
error = twa_teardown_intr(sc);
/* Stop watchdog task. */
callout_drain(&(sc->watchdog_callout[0]));
callout_drain(&(sc->watchdog_callout[1]));
/* Disconnect from the controller. */
if ((error = tw_cl_shutdown_ctlr(&(sc->ctlr_handle), 0))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2015,
"Failed to shutdown Common Layer/controller",
error);
}
return(error);
}
/*
* Function name: twa_busdma_lock
* Description: Function to provide synchronization during busdma_swi.
*
* Input: lock_arg -- lock mutex sent as argument
* op -- operation (lock/unlock) expected of the function
* Output: None
* Return value: None
*/
TW_VOID
twa_busdma_lock(TW_VOID *lock_arg, bus_dma_lock_op_t op)
{
struct mtx *lock;
lock = (struct mtx *)lock_arg;
switch (op) {
case BUS_DMA_LOCK:
mtx_lock_spin(lock);
break;
case BUS_DMA_UNLOCK:
mtx_unlock_spin(lock);
break;
default:
panic("Unknown operation 0x%x for twa_busdma_lock!", op);
}
}
/*
* Function name: twa_pci_intr
* Description: Interrupt handler. Wrapper for twa_interrupt.
*
* Input: arg -- ptr to OSL internal ctlr context
* Output: None
* Return value: None
*/
static TW_VOID
twa_pci_intr(TW_VOID *arg)
{
struct twa_softc *sc = (struct twa_softc *)arg;
tw_osli_dbg_dprintf(10, sc, "entered");
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
tw_cl_interrupt(&(sc->ctlr_handle));
}
/*
* Function name: tw_osli_fw_passthru
* Description: Builds a fw passthru cmd pkt, and submits it to CL.
*
* Input: sc -- ptr to OSL internal ctlr context
* buf -- ptr to ioctl pkt understood by CL
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
TW_INT32
tw_osli_fw_passthru(struct twa_softc *sc, TW_INT8 *buf)
{
struct tw_osli_req_context *req;
struct tw_osli_ioctl_no_data_buf *user_buf =
(struct tw_osli_ioctl_no_data_buf *)buf;
TW_TIME end_time;
TW_UINT32 timeout = 60;
TW_UINT32 data_buf_size_adjusted;
struct tw_cl_req_packet *req_pkt;
struct tw_cl_passthru_req_packet *pt_req;
TW_INT32 error;
tw_osli_dbg_dprintf(5, sc, "ioctl: passthru");
if ((req = tw_osli_get_request(sc)) == NULL)
return(EBUSY);
req->req_handle.osl_req_ctxt = req;
req->orig_req = buf;
req->flags |= TW_OSLI_REQ_FLAGS_PASSTHRU;
req_pkt = &(req->req_pkt);
req_pkt->status = 0;
req_pkt->tw_osl_callback = tw_osl_complete_passthru;
/* Let the Common Layer retry the request on cmd queue full. */
req_pkt->flags |= TW_CL_REQ_RETRY_ON_BUSY;
pt_req = &(req_pkt->gen_req_pkt.pt_req);
/*
* Make sure that the data buffer sent to firmware is a
* 512 byte multiple in size.
*/
data_buf_size_adjusted =
(user_buf->driver_pkt.buffer_length +
(sc->sg_size_factor - 1)) & ~(sc->sg_size_factor - 1);
if ((req->length = data_buf_size_adjusted)) {
if ((req->data = malloc(data_buf_size_adjusted,
TW_OSLI_MALLOC_CLASS, M_WAITOK)) == NULL) {
error = ENOMEM;
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2016,
"Could not alloc mem for "
"fw_passthru data_buf",
error);
goto fw_passthru_err;
}
/* Copy the payload. */
if ((error = copyin((TW_VOID *)(user_buf->pdata),
req->data,
user_buf->driver_pkt.buffer_length)) != 0) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2017,
"Could not copyin fw_passthru data_buf",
error);
goto fw_passthru_err;
}
pt_req->sgl_entries = 1; /* will be updated during mapping */
req->flags |= (TW_OSLI_REQ_FLAGS_DATA_IN |
TW_OSLI_REQ_FLAGS_DATA_OUT);
} else
pt_req->sgl_entries = 0; /* no payload */
pt_req->cmd_pkt = (TW_VOID *)(&(user_buf->cmd_pkt));
pt_req->cmd_pkt_length = sizeof(struct tw_cl_command_packet);
if ((error = tw_osli_map_request(req)))
goto fw_passthru_err;
end_time = tw_osl_get_local_time() + timeout;
while (req->state != TW_OSLI_REQ_STATE_COMPLETE) {
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
mtx_lock(req->ioctl_wake_timeout_lock);
req->flags |= TW_OSLI_REQ_FLAGS_SLEEPING;
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
error = mtx_sleep(req, req->ioctl_wake_timeout_lock, 0,
"twa_passthru", timeout*hz);
mtx_unlock(req->ioctl_wake_timeout_lock);
if (!(req->flags & TW_OSLI_REQ_FLAGS_SLEEPING))
error = 0;
req->flags &= ~TW_OSLI_REQ_FLAGS_SLEEPING;
if (! error) {
if (((error = req->error_code)) ||
((error = (req->state !=
TW_OSLI_REQ_STATE_COMPLETE))) ||
((error = req_pkt->status)))
goto fw_passthru_err;
break;
}
if (req_pkt->status) {
error = req_pkt->status;
goto fw_passthru_err;
}
if (error == EWOULDBLOCK) {
/* Time out! */
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
if ((!(req->error_code)) &&
(req->state == TW_OSLI_REQ_STATE_COMPLETE) &&
(!(req_pkt->status)) ) {
#ifdef TW_OSL_DEBUG
tw_osli_printf(sc, "request = %p",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x7777,
"FALSE Passthru timeout!",
req);
#endif /* TW_OSL_DEBUG */
error = 0; /* False error */
break;
}
if (!(tw_cl_is_reset_needed(&(req->ctlr->ctlr_handle)))) {
#ifdef TW_OSL_DEBUG
tw_osli_printf(sc, "request = %p",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2018,
"Passthru request timed out!",
req);
#else /* TW_OSL_DEBUG */
device_printf((sc)->bus_dev, "Passthru request timed out!\n");
#endif /* TW_OSL_DEBUG */
tw_cl_reset_ctlr(&(req->ctlr->ctlr_handle));
}
error = 0;
end_time = tw_osl_get_local_time() + timeout;
continue;
/*
* Don't touch req after a reset. It (and any
* associated data) will be
* unmapped by the callback.
*/
}
/*
* Either the request got completed, or we were woken up by a
* signal. Calculate the new timeout, in case it was the latter.
*/
timeout = (end_time - tw_osl_get_local_time());
} /* End of while loop */
/* If there was a payload, copy it back. */
if ((!error) && (req->length))
if ((error = copyout(req->data, user_buf->pdata,
user_buf->driver_pkt.buffer_length)))
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2019,
"Could not copyout fw_passthru data_buf",
error);
fw_passthru_err:
if (req_pkt->status == TW_CL_ERR_REQ_BUS_RESET)
error = EBUSY;
user_buf->driver_pkt.os_status = error;
/* Free resources. */
if (req->data)
free(req->data, TW_OSLI_MALLOC_CLASS);
tw_osli_req_q_insert_tail(req, TW_OSLI_FREE_Q);
return(error);
}
/*
* Function name: tw_osl_complete_passthru
* Description: Called to complete passthru requests.
*
* Input: req_handle -- ptr to request handle
* Output: None
* Return value: None
*/
TW_VOID
tw_osl_complete_passthru(struct tw_cl_req_handle *req_handle)
{
struct tw_osli_req_context *req = req_handle->osl_req_ctxt;
struct tw_cl_req_packet *req_pkt =
(struct tw_cl_req_packet *)(&req->req_pkt);
struct twa_softc *sc = req->ctlr;
tw_osli_dbg_dprintf(5, sc, "entered");
if (req->state != TW_OSLI_REQ_STATE_BUSY) {
tw_osli_printf(sc, "request = %p, status = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x201B,
"Unposted command completed!!",
req, req->state);
}
/*
* Remove request from the busy queue. Just mark it complete.
* There's no need to move it into the complete queue as we are
* going to be done with it right now.
*/
req->state = TW_OSLI_REQ_STATE_COMPLETE;
tw_osli_req_q_remove_item(req, TW_OSLI_BUSY_Q);
tw_osli_unmap_request(req);
/*
* Don't do a wake up if there was an error even before the request
* was sent down to the Common Layer, and we hadn't gotten an
* EINPROGRESS. The request originator will then be returned an
* error, and he can do the clean-up.
*/
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
if ((req->error_code) && (!(req->flags & TW_OSLI_REQ_FLAGS_IN_PROGRESS)))
return;
if (req->flags & TW_OSLI_REQ_FLAGS_PASSTHRU) {
if (req->flags & TW_OSLI_REQ_FLAGS_SLEEPING) {
/* Wake up the sleeping command originator. */
tw_osli_dbg_dprintf(5, sc,
"Waking up originator of request %p", req);
req->flags &= ~TW_OSLI_REQ_FLAGS_SLEEPING;
wakeup_one(req);
} else {
/*
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
* If the request completed even before mtx_sleep
* was called, simply return.
*/
if (req->flags & TW_OSLI_REQ_FLAGS_MAPPED)
return;
if (req_pkt->status == TW_CL_ERR_REQ_BUS_RESET)
return;
tw_osli_printf(sc, "request = %p",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x201C,
"Passthru callback called, "
"and caller not sleeping",
req);
}
} else {
tw_osli_printf(sc, "request = %p",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x201D,
"Passthru callback called for non-passthru request",
req);
}
}
/*
* Function name: tw_osli_get_request
* Description: Gets a request pkt from the free queue.
*
* Input: sc -- ptr to OSL internal ctlr context
* Output: None
* Return value: ptr to request pkt -- success
* NULL -- failure
*/
struct tw_osli_req_context *
tw_osli_get_request(struct twa_softc *sc)
{
struct tw_osli_req_context *req;
tw_osli_dbg_dprintf(4, sc, "entered");
/* Get a free request packet. */
req = tw_osli_req_q_remove_head(sc, TW_OSLI_FREE_Q);
/* Initialize some fields to their defaults. */
if (req) {
req->req_handle.osl_req_ctxt = NULL;
req->req_handle.cl_req_ctxt = NULL;
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
req->req_handle.is_io = 0;
req->data = NULL;
req->length = 0;
req->deadline = 0;
req->real_data = NULL;
req->real_length = 0;
req->state = TW_OSLI_REQ_STATE_INIT;/* req being initialized */
req->flags = 0;
req->error_code = 0;
req->orig_req = NULL;
bzero(&(req->req_pkt), sizeof(struct tw_cl_req_packet));
}
return(req);
}
/*
* Function name: twa_map_load_data_callback
* Description: Callback of bus_dmamap_load for the buffer associated
* with data. Updates the cmd pkt (size/sgl_entries
* fields, as applicable) to reflect the number of sg
* elements.
*
* Input: arg -- ptr to OSL internal request context
* segs -- ptr to a list of segment descriptors
* nsegments--# of segments
* error -- 0 if no errors encountered before callback,
* non-zero if errors were encountered
* Output: None
* Return value: None
*/
static TW_VOID
twa_map_load_data_callback(TW_VOID *arg, bus_dma_segment_t *segs,
TW_INT32 nsegments, TW_INT32 error)
{
struct tw_osli_req_context *req =
(struct tw_osli_req_context *)arg;
struct twa_softc *sc = req->ctlr;
struct tw_cl_req_packet *req_pkt = &(req->req_pkt);
tw_osli_dbg_dprintf(10, sc, "entered");
if (error == EINVAL) {
req->error_code = error;
return;
}
/* Mark the request as currently being processed. */
req->state = TW_OSLI_REQ_STATE_BUSY;
/* Move the request into the busy queue. */
tw_osli_req_q_insert_tail(req, TW_OSLI_BUSY_Q);
req->flags |= TW_OSLI_REQ_FLAGS_MAPPED;
if (error == EFBIG) {
req->error_code = error;
goto out;
}
if (req->flags & TW_OSLI_REQ_FLAGS_PASSTHRU) {
struct tw_cl_passthru_req_packet *pt_req;
if (req->flags & TW_OSLI_REQ_FLAGS_DATA_IN)
bus_dmamap_sync(sc->ioctl_tag, sc->ioctl_map,
BUS_DMASYNC_PREREAD);
if (req->flags & TW_OSLI_REQ_FLAGS_DATA_OUT) {
/*
* If we're using an alignment buffer, and we're
* writing data, copy the real data out.
*/
if (req->flags & TW_OSLI_REQ_FLAGS_DATA_COPY_NEEDED)
bcopy(req->real_data, req->data, req->real_length);
bus_dmamap_sync(sc->ioctl_tag, sc->ioctl_map,
BUS_DMASYNC_PREWRITE);
}
pt_req = &(req_pkt->gen_req_pkt.pt_req);
pt_req->sg_list = (TW_UINT8 *)segs;
pt_req->sgl_entries += (nsegments - 1);
error = tw_cl_fw_passthru(&(sc->ctlr_handle), req_pkt,
&(req->req_handle));
} else {
struct tw_cl_scsi_req_packet *scsi_req;
if (req->flags & TW_OSLI_REQ_FLAGS_DATA_IN)
bus_dmamap_sync(sc->dma_tag, req->dma_map,
BUS_DMASYNC_PREREAD);
if (req->flags & TW_OSLI_REQ_FLAGS_DATA_OUT) {
/*
* If we're using an alignment buffer, and we're
* writing data, copy the real data out.
*/
if (req->flags & TW_OSLI_REQ_FLAGS_DATA_COPY_NEEDED)
bcopy(req->real_data, req->data, req->real_length);
bus_dmamap_sync(sc->dma_tag, req->dma_map,
BUS_DMASYNC_PREWRITE);
}
scsi_req = &(req_pkt->gen_req_pkt.scsi_req);
scsi_req->sg_list = (TW_UINT8 *)segs;
scsi_req->sgl_entries += (nsegments - 1);
error = tw_cl_start_io(&(sc->ctlr_handle), req_pkt,
&(req->req_handle));
}
out:
if (error) {
req->error_code = error;
req_pkt->tw_osl_callback(&(req->req_handle));
/*
* If the caller had been returned EINPROGRESS, and he has
* registered a callback for handling completion, the callback
* will never get called because we were unable to submit the
* request. So, free up the request right here.
*/
if (req->flags & TW_OSLI_REQ_FLAGS_IN_PROGRESS)
tw_osli_req_q_insert_tail(req, TW_OSLI_FREE_Q);
}
}
/*
* Function name: twa_map_load_callback
* Description: Callback of bus_dmamap_load for the buffer associated
* with a cmd pkt.
*
* Input: arg -- ptr to variable to hold phys addr
* segs -- ptr to a list of segment descriptors
* nsegments--# of segments
* error -- 0 if no errors encountered before callback,
* non-zero if errors were encountered
* Output: None
* Return value: None
*/
static TW_VOID
twa_map_load_callback(TW_VOID *arg, bus_dma_segment_t *segs,
TW_INT32 nsegments, TW_INT32 error)
{
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
*((bus_addr_t *)arg) = segs[0].ds_addr;
}
/*
* Function name: tw_osli_map_request
* Description: Maps a cmd pkt and data associated with it, into
* DMA'able memory.
*
* Input: req -- ptr to request pkt
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
TW_INT32
tw_osli_map_request(struct tw_osli_req_context *req)
{
struct twa_softc *sc = req->ctlr;
TW_INT32 error = 0;
tw_osli_dbg_dprintf(10, sc, "entered");
/* If the command involves data, map that too. */
if (req->data != NULL) {
/*
* It's sufficient for the data pointer to be 4-byte aligned
* to work with 9000. However, if 4-byte aligned addresses
* are passed to bus_dmamap_load, we can get back sg elements
* that are not 512-byte multiples in size. So, we will let
* only those buffers that are 512-byte aligned to pass
* through, and bounce the rest, so as to make sure that we
* always get back sg elements that are 512-byte multiples
* in size.
*/
if (((vm_offset_t)req->data % sc->sg_size_factor) ||
(req->length % sc->sg_size_factor)) {
req->flags |= TW_OSLI_REQ_FLAGS_DATA_COPY_NEEDED;
/* Save original data pointer and length. */
req->real_data = req->data;
req->real_length = req->length;
req->length = (req->length +
(sc->sg_size_factor - 1)) &
~(sc->sg_size_factor - 1);
req->data = malloc(req->length, TW_OSLI_MALLOC_CLASS,
M_NOWAIT);
if (req->data == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x201E,
"Failed to allocate memory "
"for bounce buffer",
ENOMEM);
/* Restore original data pointer and length. */
req->data = req->real_data;
req->length = req->real_length;
return(ENOMEM);
}
}
/*
* Map the data buffer into bus space and build the SG list.
*/
if (req->flags & TW_OSLI_REQ_FLAGS_PASSTHRU) {
/* Lock against multiple simultaneous ioctl calls. */
mtx_lock_spin(sc->io_lock);
error = bus_dmamap_load(sc->ioctl_tag, sc->ioctl_map,
req->data, req->length,
twa_map_load_data_callback, req,
BUS_DMA_WAITOK);
mtx_unlock_spin(sc->io_lock);
} else if (req->flags & TW_OSLI_REQ_FLAGS_CCB) {
error = bus_dmamap_load_ccb(sc->dma_tag, req->dma_map,
req->orig_req, twa_map_load_data_callback, req,
BUS_DMA_WAITOK);
} else {
/*
* There's only one CAM I/O thread running at a time.
* So, there's no need to hold the io_lock.
*/
error = bus_dmamap_load(sc->dma_tag, req->dma_map,
req->data, req->length,
twa_map_load_data_callback, req,
BUS_DMA_WAITOK);
}
if (!error)
error = req->error_code;
else {
if (error == EINPROGRESS) {
/*
* Specifying sc->io_lock as the lockfuncarg
* in ...tag_create should protect the access
* of ...FLAGS_MAPPED from the callback.
*/
mtx_lock_spin(sc->io_lock);
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
if (!(req->flags & TW_OSLI_REQ_FLAGS_MAPPED))
req->flags |= TW_OSLI_REQ_FLAGS_IN_PROGRESS;
tw_osli_disallow_new_requests(sc, &(req->req_handle));
mtx_unlock_spin(sc->io_lock);
error = 0;
} else {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x9999,
"Failed to map DMA memory "
"for I/O request",
error);
req->flags |= TW_OSLI_REQ_FLAGS_FAILED;
/* Free alignment buffer if it was used. */
if (req->flags &
TW_OSLI_REQ_FLAGS_DATA_COPY_NEEDED) {
free(req->data, TW_OSLI_MALLOC_CLASS);
/*
* Restore original data pointer
* and length.
*/
req->data = req->real_data;
req->length = req->real_length;
}
}
}
} else {
/* Mark the request as currently being processed. */
req->state = TW_OSLI_REQ_STATE_BUSY;
/* Move the request into the busy queue. */
tw_osli_req_q_insert_tail(req, TW_OSLI_BUSY_Q);
if (req->flags & TW_OSLI_REQ_FLAGS_PASSTHRU)
error = tw_cl_fw_passthru(&sc->ctlr_handle,
&(req->req_pkt), &(req->req_handle));
else
error = tw_cl_start_io(&sc->ctlr_handle,
&(req->req_pkt), &(req->req_handle));
if (error) {
req->error_code = error;
req->req_pkt.tw_osl_callback(&(req->req_handle));
}
}
return(error);
}
/*
* Function name: tw_osli_unmap_request
* Description: Undoes the mapping done by tw_osli_map_request.
*
* Input: req -- ptr to request pkt
* Output: None
* Return value: None
*/
TW_VOID
tw_osli_unmap_request(struct tw_osli_req_context *req)
{
struct twa_softc *sc = req->ctlr;
tw_osli_dbg_dprintf(10, sc, "entered");
/* If the command involved data, unmap that too. */
if (req->data != NULL) {
if (req->flags & TW_OSLI_REQ_FLAGS_PASSTHRU) {
/* Lock against multiple simultaneous ioctl calls. */
mtx_lock_spin(sc->io_lock);
if (req->flags & TW_OSLI_REQ_FLAGS_DATA_IN) {
bus_dmamap_sync(sc->ioctl_tag,
sc->ioctl_map, BUS_DMASYNC_POSTREAD);
/*
* If we are using a bounce buffer, and we are
* reading data, copy the real data in.
*/
if (req->flags & TW_OSLI_REQ_FLAGS_DATA_COPY_NEEDED)
bcopy(req->data, req->real_data,
req->real_length);
}
if (req->flags & TW_OSLI_REQ_FLAGS_DATA_OUT)
bus_dmamap_sync(sc->ioctl_tag, sc->ioctl_map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->ioctl_tag, sc->ioctl_map);
mtx_unlock_spin(sc->io_lock);
} else {
if (req->flags & TW_OSLI_REQ_FLAGS_DATA_IN) {
bus_dmamap_sync(sc->dma_tag,
req->dma_map, BUS_DMASYNC_POSTREAD);
/*
* If we are using a bounce buffer, and we are
* reading data, copy the real data in.
*/
if (req->flags & TW_OSLI_REQ_FLAGS_DATA_COPY_NEEDED)
bcopy(req->data, req->real_data,
req->real_length);
}
if (req->flags & TW_OSLI_REQ_FLAGS_DATA_OUT)
bus_dmamap_sync(sc->dma_tag, req->dma_map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->dma_tag, req->dma_map);
}
}
/* Free alignment buffer if it was used. */
if (req->flags & TW_OSLI_REQ_FLAGS_DATA_COPY_NEEDED) {
free(req->data, TW_OSLI_MALLOC_CLASS);
/* Restore original data pointer and length. */
req->data = req->real_data;
req->length = req->real_length;
}
}
#ifdef TW_OSL_DEBUG
TW_VOID twa_report_stats(TW_VOID);
TW_VOID twa_reset_stats(TW_VOID);
TW_VOID tw_osli_print_ctlr_stats(struct twa_softc *sc);
TW_VOID twa_print_req_info(struct tw_osli_req_context *req);
/*
* Function name: twa_report_stats
* Description: For being called from ddb. Calls functions that print
* OSL and CL internal stats for the controller.
*
* Input: None
* Output: None
* Return value: None
*/
TW_VOID
twa_report_stats(TW_VOID)
{
struct twa_softc *sc;
TW_INT32 i;
for (i = 0; (sc = devclass_get_softc(twa_devclass, i)) != NULL; i++) {
tw_osli_print_ctlr_stats(sc);
tw_cl_print_ctlr_stats(&sc->ctlr_handle);
}
}
/*
* Function name: tw_osli_print_ctlr_stats
* Description: For being called from ddb. Prints OSL controller stats
*
* Input: sc -- ptr to OSL internal controller context
* Output: None
* Return value: None
*/
TW_VOID
tw_osli_print_ctlr_stats(struct twa_softc *sc)
{
twa_printf(sc, "osl_ctlr_ctxt = %p\n", sc);
twa_printf(sc, "OSLq type current max\n");
twa_printf(sc, "free %04d %04d\n",
sc->q_stats[TW_OSLI_FREE_Q].cur_len,
sc->q_stats[TW_OSLI_FREE_Q].max_len);
twa_printf(sc, "busy %04d %04d\n",
sc->q_stats[TW_OSLI_BUSY_Q].cur_len,
sc->q_stats[TW_OSLI_BUSY_Q].max_len);
}
/*
* Function name: twa_print_req_info
* Description: For being called from ddb. Calls functions that print
* OSL and CL internal details for the request.
*
* Input: req -- ptr to OSL internal request context
* Output: None
* Return value: None
*/
TW_VOID
twa_print_req_info(struct tw_osli_req_context *req)
{
struct twa_softc *sc = req->ctlr;
twa_printf(sc, "OSL details for request:\n");
twa_printf(sc, "osl_req_ctxt = %p, cl_req_ctxt = %p\n"
"data = %p, length = 0x%x, real_data = %p, real_length = 0x%x\n"
"state = 0x%x, flags = 0x%x, error = 0x%x, orig_req = %p\n"
"next_req = %p, prev_req = %p, dma_map = %p\n",
req->req_handle.osl_req_ctxt, req->req_handle.cl_req_ctxt,
req->data, req->length, req->real_data, req->real_length,
req->state, req->flags, req->error_code, req->orig_req,
req->link.next, req->link.prev, req->dma_map);
tw_cl_print_req_info(&(req->req_handle));
}
/*
* Function name: twa_reset_stats
* Description: For being called from ddb.
* Resets some OSL controller stats.
*
* Input: None
* Output: None
* Return value: None
*/
TW_VOID
twa_reset_stats(TW_VOID)
{
struct twa_softc *sc;
TW_INT32 i;
for (i = 0; (sc = devclass_get_softc(twa_devclass, i)) != NULL; i++) {
sc->q_stats[TW_OSLI_FREE_Q].max_len = 0;
sc->q_stats[TW_OSLI_BUSY_Q].max_len = 0;
tw_cl_reset_stats(&sc->ctlr_handle);
}
}
#endif /* TW_OSL_DEBUG */