freebsd-skq/sys/arm/allwinner/a10_mmc.h

/*-
 * Copyright (c) 2013 Alexander Fedorov <alexander.fedorov@rtlservice.com>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $FreeBSD$
 */

#ifndef	_A10_MMC_H_
#define	_A10_MMC_H_

#define	A10_MMC_GCTRL		0x00	/* Global Control Register */
#define	A10_MMC_CLKCR		0x04	/* Clock Control Register */
#define	A10_MMC_TIMEOUT		0x08	/* Timeout Register */
#define	A10_MMC_WIDTH		0x0C	/* Bus Width Register */
#define	A10_MMC_BLKSZ		0x10	/* Block Size Register */
#define	A10_MMC_BCNTR		0x14	/* Byte Count Register */
#define	A10_MMC_CMDR		0x18	/* Command Register */
#define	A10_MMC_CARG		0x1C	/* Argument Register */
#define	A10_MMC_RESP0		0x20	/* Response Register 0 */
#define	A10_MMC_RESP1		0x24	/* Response Register 1 */
#define	A10_MMC_RESP2		0x28	/* Response Register 2 */
#define	A10_MMC_RESP3		0x2C	/* Response Register 3 */
#define	A10_MMC_IMASK		0x30	/* Interrupt Mask Register */
#define	A10_MMC_MISTA		0x34	/* Masked Interrupt Status Register */
#define	A10_MMC_RINTR		0x38	/* Raw Interrupt Status Register */
#define	A10_MMC_STAS		0x3C	/* Status Register */
#define	A10_MMC_FTRGL		0x40	/* FIFO Threshold Watermark Register */
#define	A10_MMC_FUNS		0x44	/* Function Select Register */
#define	A10_MMC_CBCR		0x48	/* CIU Byte Count Register */
#define	A10_MMC_BBCR		0x4C	/* BIU Byte Count Register */
#define	A10_MMC_DBGC		0x50	/* Debug Enable Register */
#define	A10_MMC_DMAC		0x80	/* IDMAC Control Register */
#define	A10_MMC_DLBA		0x84	/* IDMAC Desc List Base Address Reg */
#define	A10_MMC_IDST		0x88	/* IDMAC Status Register */
#define	A10_MMC_IDIE		0x8C	/* IDMAC Interrupt Enable Register */
#define	A10_MMC_CHDA		0x90
#define	A10_MMC_CBDA		0x94
#define	A10_MMC_FIFO		0x100	/* FIFO Access Address */

/* A10_MMC_GCTRL */
#define	A10_MMC_SOFT_RESET		(1U << 0)
#define	A10_MMC_FIFO_RESET		(1U << 1)
#define	A10_MMC_DMA_RESET		(1U << 2)
#define	A10_MMC_INT_ENABLE		(1U << 4)
#define	A10_MMC_DMA_ENABLE		(1U << 5)
#define	A10_MMC_DEBOUNCE_ENABLE		(1U << 8)
#define	A10_MMC_DDR_MODE		(1U << 10)
#define	A10_MMC_ACCESS_BY_AHB		(1U << 31)
#define	A10_MMC_RESET					\
	(A10_MMC_SOFT_RESET | A10_MMC_FIFO_RESET | A10_MMC_DMA_RESET)

/* A10_MMC_CLKCR */
#define	A10_MMC_CARD_CLK_ON		(1U << 16)
#define	A10_MMC_LOW_POWER_ON		(1U << 17)
#define	A10_MMC_CLKCR_DIV		0xff

/* A10_MMC_WIDTH */
#define	A10_MMC_WIDTH1			0
#define	A10_MMC_WIDTH4			1
#define	A10_MMC_WIDTH8			2

/* A10_MMC_CMDR */
#define	A10_MMC_RESP_EXP		(1U << 6)
#define	A10_MMC_LONG_RESP		(1U << 7)
#define	A10_MMC_CHECK_RESP_CRC		(1U << 8)
#define	A10_MMC_DATA_EXP		(1U << 9)
#define	A10_MMC_WRITE			(1U << 10)
#define	A10_MMC_SEQ_MODE		(1U << 11)
#define	A10_MMC_SEND_AUTOSTOP		(1U << 12)
#define	A10_MMC_WAIT_PREOVER		(1U << 13)
#define	A10_MMC_STOP_ABORT_CMD		(1U << 14)
#define	A10_MMC_SEND_INIT_SEQ		(1U << 15)
#define	A10_MMC_UPCLK_ONLY		(1U << 21)
#define	A10_MMC_RDCEATADEV		(1U << 22)
#define	A10_MMC_CCS_EXP			(1U << 23)
#define	A10_MMC_ENB_BOOT		(1U << 24)
#define	A10_MMC_ALT_BOOT_OPT		(1U << 25)
#define	A10_MMC_BOOT_ACK_EXP		(1U << 26)
#define	A10_MMC_DISABLE_BOOT		(1U << 27)
#define	A10_MMC_VOL_SWITCH		(1U << 28)
#define	A10_MMC_START			(1U << 31)

/* A10_MMC_IMASK and A10_MMC_RINTR */
#define	A10_MMC_RESP_ERR		(1U << 1)
#define	A10_MMC_CMD_DONE		(1U << 2)
#define	A10_MMC_DATA_OVER		(1U << 3)
#define	A10_MMC_TX_DATA_REQ		(1U << 4)
#define	A10_MMC_RX_DATA_REQ		(1U << 5)
#define	A10_MMC_RESP_CRC_ERR		(1U << 6)
#define	A10_MMC_DATA_CRC_ERR		(1U << 7)
#define	A10_MMC_RESP_TIMEOUT		(1U << 8)
#define	A10_MMC_ACK_RECV		(1U << 8)
#define	A10_MMC_DATA_TIMEOUT		(1U << 9)
#define	A10_MMC_BOOT_START		(1U << 9)
#define	A10_MMC_DATA_STARVE		(1U << 10)
#define	A10_MMC_VOL_CHG_DONE		(1U << 10)
#define	A10_MMC_FIFO_RUN_ERR		(1U << 11)
#define	A10_MMC_HARDW_LOCKED		(1U << 12)
#define	A10_MMC_START_BIT_ERR		(1U << 13)
#define	A10_MMC_AUTOCMD_DONE		(1U << 14)
#define	A10_MMC_END_BIT_ERR		(1U << 15)
#define	A10_MMC_SDIO_INT		(1U << 16)
#define	A10_MMC_CARD_INSERT		(1U << 30)
#define	A10_MMC_CARD_REMOVE		(1U << 31)
#define	A10_MMC_INT_ERR_BIT				\
	(A10_MMC_RESP_ERR | A10_MMC_RESP_CRC_ERR |	\
	 A10_MMC_DATA_CRC_ERR | A10_MMC_RESP_TIMEOUT |	\
	 A10_MMC_FIFO_RUN_ERR |	A10_MMC_HARDW_LOCKED |	\
	 A10_MMC_START_BIT_ERR | A10_MMC_END_BIT_ERR)

/* A10_MMC_STAS */
#define	A10_MMC_RX_WLFLAG		(1U << 0)
#define	A10_MMC_TX_WLFLAG		(1U << 1)
#define	A10_MMC_FIFO_EMPTY		(1U << 2)
#define	A10_MMC_FIFO_FULL		(1U << 3)
#define	A10_MMC_CARD_PRESENT		(1U << 8)
#define	A10_MMC_CARD_DATA_BUSY		(1U << 9)
#define	A10_MMC_DATA_FSM_BUSY		(1U << 10)
#define	A10_MMC_DMA_REQ			(1U << 31)
#define	A10_MMC_FIFO_SIZE		16

/* A10_MMC_FUNS */
#define	A10_MMC_CE_ATA_ON		(0xceaaU << 16)
#define	A10_MMC_SEND_IRQ_RESP		(1U << 0)
#define	A10_MMC_SDIO_RD_WAIT		(1U << 1)
#define	A10_MMC_ABT_RD_DATA		(1U << 2)
#define	A10_MMC_SEND_CC_SD		(1U << 8)
#define	A10_MMC_SEND_AUTOSTOP_CC_SD	(1U << 9)
#define	A10_MMC_CE_ATA_DEV_INT_ENB	(1U << 10)

/* IDMA CONTROLLER BUS MOD BIT FIELD */
#define	A10_MMC_IDMAC_SOFT_RST		(1U << 0)
#define	A10_MMC_IDMAC_FIX_BURST		(1U << 1)
#define	A10_MMC_IDMAC_IDMA_ON		(1U << 7)
#define	A10_MMC_IDMAC_REFETCH_DES	(1U << 31)

/* A10_MMC_IDST */
#define	A10_MMC_IDMAC_TRANSMIT_INT	(1U << 0)
#define	A10_MMC_IDMAC_RECEIVE_INT	(1U << 1)
#define	A10_MMC_IDMAC_FATAL_BUS_ERR	(1U << 2)
#define	A10_MMC_IDMAC_DES_INVALID	(1U << 4)
#define	A10_MMC_IDMAC_CARD_ERR_SUM	(1U << 5)
#define	A10_MMC_IDMAC_NORMAL_INT_SUM	(1U << 8)
#define	A10_MMC_IDMAC_ABNORMAL_INT_SUM	(1U << 9)
#define	A10_MMC_IDMAC_HOST_ABT_INTX	(1U << 10)
#define	A10_MMC_IDMAC_HOST_ABT_INRX	(1U << 10)
#define	A10_MMC_IDMAC_IDLE		(0U << 13)
#define	A10_MMC_IDMAC_SUSPEND		(1U << 13)
#define	A10_MMC_IDMAC_DESC_RD		(2U << 13)
#define	A10_MMC_IDMAC_DESC_CHECK	(3U << 13)
#define	A10_MMC_IDMAC_RD_REQ_WAIT	(4U << 13)
#define	A10_MMC_IDMAC_WR_REQ_WAIT	(5U << 13)
#define	A10_MMC_IDMAC_RD		(6U << 13)
#define	A10_MMC_IDMAC_WR		(7U << 13)
#define	A10_MMC_IDMAC_DESC_CLOSE	(8U << 13)
#define	A10_MMC_IDMAC_ERROR				\
	(A10_MMC_IDMAC_FATAL_BUS_ERR | A10_MMC_IDMAC_CARD_ERR_SUM |	\
	 A10_MMC_IDMAC_DES_INVALID | A10_MMC_IDMAC_ABNORMAL_INT_SUM)
#define	A10_MMC_IDMAC_COMPLETE				\
	(A10_MMC_IDMAC_TRANSMIT_INT | A10_MMC_IDMAC_RECEIVE_INT)

/* The DMA descriptor table. */
struct a10_mmc_dma_desc {
	uint32_t config;
#define	A10_MMC_DMA_CONFIG_DIC		(1U << 1)
#define	A10_MMC_DMA_CONFIG_LD		(1U << 2)
#define	A10_MMC_DMA_CONFIG_FD		(1U << 3)
#define	A10_MMC_DMA_CONFIG_CH		(1U << 4)
#define	A10_MMC_DMA_CONFIG_ER		(1U << 5)
#define	A10_MMC_DMA_CONFIG_CES		(1U << 30)
#define	A10_MMC_DMA_CONFIG_OWN		(1U << 31)
	uint32_t buf_size;
	uint32_t buf_addr;
	uint32_t next;
};

#endif /* _A10_MMC_H_ */