freebsd-skq/usr.bin/mkimg/image.c

756 lines
15 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2014 Juniper Networks, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
#include <sys/mman.h>
#include <sys/stat.h>
#include <assert.h>
#include <err.h>
#include <errno.h>
2014-06-26 01:10:53 +00:00
#include <limits.h>
#include <paths.h>
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
#include <stdint.h>
2014-06-26 01:10:53 +00:00
#include <stdio.h>
#include <stdlib.h>
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
#include <string.h>
#include <unistd.h>
#include "image.h"
#include "mkimg.h"
#ifndef MAP_NOCORE
#define MAP_NOCORE 0
#endif
#ifndef MAP_NOSYNC
#define MAP_NOSYNC 0
#endif
#ifndef SEEK_DATA
#define SEEK_DATA -1
#endif
#ifndef SEEK_HOLE
#define SEEK_HOLE -1
#endif
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
struct chunk {
TAILQ_ENTRY(chunk) ch_list;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
size_t ch_size; /* Size of chunk in bytes. */
lba_t ch_block; /* Block address in image. */
union {
struct {
off_t ofs; /* Offset in backing file. */
int fd; /* FD of backing file. */
} file;
struct {
void *ptr; /* Pointer to data in memory */
} mem;
} ch_u;
u_int ch_type;
#define CH_TYPE_ZEROES 0 /* Chunk is a gap (no data). */
#define CH_TYPE_FILE 1 /* File-backed chunk. */
#define CH_TYPE_MEMORY 2 /* Memory-backed chunk */
};
static TAILQ_HEAD(chunk_head, chunk) image_chunks;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
static u_int image_nchunks;
static char image_swap_file[PATH_MAX];
static int image_swap_fd = -1;
static u_int image_swap_pgsz;
static off_t image_swap_size;
static lba_t image_size;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
static int
is_empty_sector(void *buf)
{
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
uint64_t *p = buf;
size_t n, max;
assert(((uintptr_t)p & 3) == 0);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
max = secsz / sizeof(uint64_t);
for (n = 0; n < max; n++) {
if (p[n] != 0UL)
return (0);
}
return (1);
}
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
/*
* Swap file handlng.
*/
static off_t
image_swap_alloc(size_t size)
{
off_t ofs;
size_t unit;
unit = (secsz > image_swap_pgsz) ? secsz : image_swap_pgsz;
assert((unit & (unit - 1)) == 0);
size = (size + unit - 1) & ~(unit - 1);
ofs = image_swap_size;
image_swap_size += size;
if (ftruncate(image_swap_fd, image_swap_size) == -1) {
image_swap_size = ofs;
ofs = -1LL;
}
return (ofs);
}
/*
* Image chunk handling.
*/
static struct chunk *
image_chunk_find(lba_t blk)
{
static struct chunk *last = NULL;
struct chunk *ch;
ch = (last != NULL && last->ch_block <= blk)
? last : TAILQ_FIRST(&image_chunks);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
while (ch != NULL) {
if (ch->ch_block <= blk &&
(lba_t)(ch->ch_block + (ch->ch_size / secsz)) > blk) {
last = ch;
break;
}
ch = TAILQ_NEXT(ch, ch_list);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
}
return (ch);
}
static size_t
image_chunk_grow(struct chunk *ch, size_t sz)
{
size_t dsz, newsz;
newsz = ch->ch_size + sz;
if (newsz > ch->ch_size) {
ch->ch_size = newsz;
return (0);
}
/* We would overflow -- create new chunk for remainder. */
dsz = SIZE_MAX - ch->ch_size;
assert(dsz < sz);
ch->ch_size = SIZE_MAX;
return (sz - dsz);
}
static struct chunk *
image_chunk_memory(struct chunk *ch, lba_t blk)
{
struct chunk *new;
void *ptr;
ptr = calloc(1, secsz);
if (ptr == NULL)
return (NULL);
if (ch->ch_block < blk) {
new = malloc(sizeof(*new));
if (new == NULL) {
free(ptr);
return (NULL);
}
memcpy(new, ch, sizeof(*new));
ch->ch_size = (blk - ch->ch_block) * secsz;
new->ch_block = blk;
new->ch_size -= ch->ch_size;
TAILQ_INSERT_AFTER(&image_chunks, ch, new, ch_list);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
image_nchunks++;
ch = new;
}
if (ch->ch_size > secsz) {
new = malloc(sizeof(*new));
if (new == NULL) {
free(ptr);
return (NULL);
}
memcpy(new, ch, sizeof(*new));
ch->ch_size = secsz;
new->ch_block++;
new->ch_size -= secsz;
TAILQ_INSERT_AFTER(&image_chunks, ch, new, ch_list);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
image_nchunks++;
}
ch->ch_type = CH_TYPE_MEMORY;
ch->ch_u.mem.ptr = ptr;
return (ch);
}
static int
image_chunk_skipto(lba_t to)
{
struct chunk *ch;
lba_t from;
size_t sz;
ch = TAILQ_LAST(&image_chunks, chunk_head);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
from = (ch != NULL) ? ch->ch_block + (ch->ch_size / secsz) : 0LL;
assert(from <= to);
/* Nothing to do? */
if (from == to)
return (0);
/* Avoid bugs due to overflows. */
if ((uintmax_t)(to - from) > (uintmax_t)(SIZE_MAX / secsz))
return (EFBIG);
sz = (to - from) * secsz;
if (ch != NULL && ch->ch_type == CH_TYPE_ZEROES) {
sz = image_chunk_grow(ch, sz);
if (sz == 0)
return (0);
from = ch->ch_block + (ch->ch_size / secsz);
}
ch = malloc(sizeof(*ch));
if (ch == NULL)
return (ENOMEM);
memset(ch, 0, sizeof(*ch));
ch->ch_block = from;
ch->ch_size = sz;
ch->ch_type = CH_TYPE_ZEROES;
TAILQ_INSERT_TAIL(&image_chunks, ch, ch_list);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
image_nchunks++;
return (0);
}
static int
image_chunk_append(lba_t blk, size_t sz, off_t ofs, int fd)
{
struct chunk *ch;
ch = TAILQ_LAST(&image_chunks, chunk_head);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
if (ch != NULL && ch->ch_type == CH_TYPE_FILE) {
if (fd == ch->ch_u.file.fd &&
blk == (lba_t)(ch->ch_block + (ch->ch_size / secsz)) &&
ofs == (off_t)(ch->ch_u.file.ofs + ch->ch_size)) {
sz = image_chunk_grow(ch, sz);
if (sz == 0)
return (0);
blk = ch->ch_block + (ch->ch_size / secsz);
ofs = ch->ch_u.file.ofs + ch->ch_size;
}
}
ch = malloc(sizeof(*ch));
if (ch == NULL)
return (ENOMEM);
memset(ch, 0, sizeof(*ch));
ch->ch_block = blk;
ch->ch_size = sz;
ch->ch_type = CH_TYPE_FILE;
ch->ch_u.file.ofs = ofs;
ch->ch_u.file.fd = fd;
TAILQ_INSERT_TAIL(&image_chunks, ch, ch_list);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
image_nchunks++;
return (0);
}
static int
image_chunk_copyin(lba_t blk, void *buf, size_t sz, off_t ofs, int fd)
{
uint8_t *p = buf;
int error;
error = 0;
sz = (sz + secsz - 1) & ~(secsz - 1);
while (!error && sz > 0) {
if (is_empty_sector(p))
error = image_chunk_skipto(blk + 1);
else
error = image_chunk_append(blk, secsz, ofs, fd);
blk++;
p += secsz;
sz -= secsz;
ofs += secsz;
}
return (error);
}
/*
* File mapping support.
*/
static void *
image_file_map(int fd, off_t ofs, size_t sz, off_t *iofp)
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
{
void *ptr;
size_t unit;
int flags, prot;
off_t x;
/* On Linux anyway ofs must also be page aligned */
if ((x = (ofs % image_swap_pgsz)) != 0) {
ofs -= x;
sz += x;
*iofp = x;
} else
*iofp = 0;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
unit = (secsz > image_swap_pgsz) ? secsz : image_swap_pgsz;
assert((unit & (unit - 1)) == 0);
flags = MAP_NOCORE | MAP_NOSYNC | MAP_SHARED;
/* Allow writing to our swap file only. */
prot = PROT_READ | ((fd == image_swap_fd) ? PROT_WRITE : 0);
sz = (sz + unit - 1) & ~(unit - 1);
ptr = mmap(NULL, sz, prot, flags, fd, ofs);
return ((ptr == MAP_FAILED) ? NULL : ptr);
}
static int
image_file_unmap(void *buffer, size_t sz)
{
size_t unit;
unit = (secsz > image_swap_pgsz) ? secsz : image_swap_pgsz;
sz = (sz + unit - 1) & ~(unit - 1);
if (madvise(buffer, sz, MADV_DONTNEED) != 0)
warn("madvise");
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
munmap(buffer, sz);
return (0);
}
/*
* Input/source file handling.
*/
static int
image_copyin_stream(lba_t blk, int fd, uint64_t *sizep)
{
char *buffer;
uint64_t bytesize;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
off_t swofs;
size_t iosz;
ssize_t rdsz;
int error;
off_t iof;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
/*
* This makes sure we're doing I/O in multiples of the page
* size as well as of the sector size. 2MB is the minimum
* by virtue of secsz at least 512 bytes and the page size
* at least 4K bytes.
*/
iosz = secsz * image_swap_pgsz;
bytesize = 0;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
do {
swofs = image_swap_alloc(iosz);
if (swofs == -1LL)
return (errno);
buffer = image_file_map(image_swap_fd, swofs, iosz, &iof);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
if (buffer == NULL)
return (errno);
rdsz = read(fd, &buffer[iof], iosz);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
if (rdsz > 0)
error = image_chunk_copyin(blk, &buffer[iof], rdsz, swofs,
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
image_swap_fd);
else if (rdsz < 0)
error = errno;
else
error = 0;
image_file_unmap(buffer, iosz);
/* XXX should we relinguish unused swap space? */
if (error)
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
return (error);
bytesize += rdsz;
blk += (rdsz + secsz - 1) / secsz;
} while (rdsz > 0);
if (sizep != NULL)
*sizep = bytesize;
return (0);
}
static int
image_copyin_mapped(lba_t blk, int fd, uint64_t *sizep)
{
off_t cur, data, end, hole, pos, iof;
void *mp;
char *buf;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
uint64_t bytesize;
size_t iosz, sz;
int error;
/*
* We'd like to know the size of the file and we must
* be able to seek in order to mmap(2). If this isn't
* possible, then treat the file as a stream/pipe.
*/
end = lseek(fd, 0L, SEEK_END);
if (end == -1L)
return (image_copyin_stream(blk, fd, sizep));
/*
* We need the file opened for the duration and our
* caller is going to close the file. Make a dup(2)
* so that control the faith of the descriptor.
*/
fd = dup(fd);
if (fd == -1)
return (errno);
iosz = secsz * image_swap_pgsz;
bytesize = 0;
cur = pos = 0;
error = 0;
while (!error && cur < end) {
hole = lseek(fd, cur, SEEK_HOLE);
if (hole == -1)
hole = end;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
data = lseek(fd, cur, SEEK_DATA);
if (data == -1)
data = end;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
/*
* Treat the entire file as data if sparse files
* are not supported by the underlying file system.
*/
if (hole == end && data == end)
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
data = cur;
if (cur == hole && data > hole) {
hole = pos;
pos = data & ~((uint64_t)secsz - 1);
blk += (pos - hole) / secsz;
error = image_chunk_skipto(blk);
bytesize += pos - hole;
cur = data;
} else if (cur == data && hole > data) {
data = pos;
pos = (hole + secsz - 1) & ~((uint64_t)secsz - 1);
while (data < pos) {
sz = (pos - data > (off_t)iosz)
? iosz : (size_t)(pos - data);
buf = mp = image_file_map(fd, data, sz, &iof);
if (mp != NULL) {
buf += iof;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
error = image_chunk_copyin(blk, buf,
sz, data, fd);
image_file_unmap(mp, sz);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
} else
error = errno;
blk += sz / secsz;
bytesize += sz;
data += sz;
}
cur = hole;
} else {
/*
* I don't know what this means or whether it
* can happen at all...
*/
assert(0);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
}
}
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
if (error)
close(fd);
if (!error && sizep != NULL)
*sizep = bytesize;
return (error);
}
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
int
image_copyin(lba_t blk, int fd, uint64_t *sizep)
{
struct stat sb;
int error;
error = image_chunk_skipto(blk);
if (!error) {
if (fstat(fd, &sb) == -1 || !S_ISREG(sb.st_mode))
error = image_copyin_stream(blk, fd, sizep);
else
error = image_copyin_mapped(blk, fd, sizep);
}
return (error);
}
/*
* Output/sink file handling.
*/
int
image_copyout(int fd)
{
int error;
error = image_copyout_region(fd, 0, image_size);
if (!error)
error = image_copyout_done(fd);
return (error);
}
int
image_copyout_done(int fd)
{
off_t ofs;
int error;
ofs = lseek(fd, 0L, SEEK_CUR);
if (ofs == -1)
return (0);
error = (ftruncate(fd, ofs) == -1) ? errno : 0;
return (error);
}
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
static int
image_copyout_memory(int fd, size_t size, void *ptr)
{
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
if (write(fd, ptr, size) == -1)
return (errno);
return (0);
}
int
image_copyout_zeroes(int fd, size_t count)
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
{
static uint8_t *zeroes = NULL;
size_t sz;
int error;
if (lseek(fd, (off_t)count, SEEK_CUR) != -1)
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
return (0);
/*
* If we can't seek, we must write.
*/
if (zeroes == NULL) {
zeroes = calloc(1, secsz);
if (zeroes == NULL)
return (ENOMEM);
}
while (count > 0) {
sz = (count > secsz) ? secsz : count;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
error = image_copyout_memory(fd, sz, zeroes);
if (error)
return (error);
count -= sz;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
}
return (0);
}
static int
image_copyout_file(int fd, size_t size, int ifd, off_t iofs)
{
void *mp;
char *buf;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
size_t iosz, sz;
int error;
off_t iof;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
iosz = secsz * image_swap_pgsz;
while (size > 0) {
sz = (size > iosz) ? iosz : size;
buf = mp = image_file_map(ifd, iofs, sz, &iof);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
if (buf == NULL)
return (errno);
buf += iof;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
error = image_copyout_memory(fd, sz, buf);
image_file_unmap(mp, sz);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
if (error)
return (error);
size -= sz;
iofs += sz;
}
return (0);
}
int
image_copyout_region(int fd, lba_t blk, lba_t size)
{
struct chunk *ch;
size_t ofs, sz;
int error;
size *= secsz;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
error = 0;
while (!error && size > 0) {
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
ch = image_chunk_find(blk);
if (ch == NULL) {
error = EINVAL;
break;
}
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
ofs = (blk - ch->ch_block) * secsz;
sz = ch->ch_size - ofs;
sz = ((lba_t)sz < size) ? sz : (size_t)size;
switch (ch->ch_type) {
case CH_TYPE_ZEROES:
error = image_copyout_zeroes(fd, sz);
break;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
case CH_TYPE_FILE:
error = image_copyout_file(fd, sz, ch->ch_u.file.fd,
ch->ch_u.file.ofs + ofs);
break;
case CH_TYPE_MEMORY:
error = image_copyout_memory(fd, sz, ch->ch_u.mem.ptr);
break;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
default:
assert(0);
}
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
size -= sz;
blk += sz / secsz;
}
return (error);
}
int
image_data(lba_t blk, lba_t size)
{
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
struct chunk *ch;
lba_t lim;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
while (1) {
ch = image_chunk_find(blk);
if (ch == NULL)
return (0);
if (ch->ch_type != CH_TYPE_ZEROES)
return (1);
lim = ch->ch_block + (ch->ch_size / secsz);
if (lim >= blk + size)
return (0);
size -= lim - blk;
blk = lim;
}
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
/*NOTREACHED*/
}
lba_t
image_get_size(void)
{
return (image_size);
}
int
image_set_size(lba_t blk)
{
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
int error;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
error = image_chunk_skipto(blk);
if (!error)
image_size = blk;
return (error);
}
int
image_write(lba_t blk, void *buf, ssize_t len)
{
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
struct chunk *ch;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
while (len > 0) {
if (!is_empty_sector(buf)) {
ch = image_chunk_find(blk);
if (ch == NULL)
return (ENXIO);
/* We may not be able to write to files. */
if (ch->ch_type == CH_TYPE_FILE)
return (EINVAL);
if (ch->ch_type == CH_TYPE_ZEROES) {
ch = image_chunk_memory(ch, blk);
if (ch == NULL)
return (ENOMEM);
}
assert(ch->ch_type == CH_TYPE_MEMORY);
memcpy(ch->ch_u.mem.ptr, buf, secsz);
}
blk++;
buf = (char *)buf + secsz;
len--;
}
return (0);
}
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
static void
image_cleanup(void)
{
struct chunk *ch;
while ((ch = TAILQ_FIRST(&image_chunks)) != NULL) {
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
switch (ch->ch_type) {
case CH_TYPE_FILE:
/* We may be closing the same file multiple times. */
if (ch->ch_u.file.fd != -1)
close(ch->ch_u.file.fd);
break;
case CH_TYPE_MEMORY:
free(ch->ch_u.mem.ptr);
break;
default:
break;
}
TAILQ_REMOVE(&image_chunks, ch, ch_list);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
free(ch);
}
if (image_swap_fd != -1)
close(image_swap_fd);
unlink(image_swap_file);
}
int
image_init(void)
{
2014-06-26 01:10:53 +00:00
const char *tmpdir;
TAILQ_INIT(&image_chunks);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
image_nchunks = 0;
image_swap_size = 0;
image_swap_pgsz = getpagesize();
if (atexit(image_cleanup) == -1)
return (errno);
2014-06-26 01:10:53 +00:00
if ((tmpdir = getenv("TMPDIR")) == NULL || *tmpdir == '\0')
tmpdir = _PATH_TMP;
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
snprintf(image_swap_file, sizeof(image_swap_file), "%s/mkimg-XXXXXX",
2014-06-26 01:10:53 +00:00
tmpdir);
Improve performance of mking(1) by keeping a list of "chunks" in memory, that keeps track of a particular region of the image. In particular the image_data() function needs to return to the caller whether a region contains data or is all zeroes. This required reading the region from the temporary file and comparing the bytes. When image_data() is used multiple times for the same region, this will get painful fast. With a chunk describing a region of the image, we now also have a way to refer to the image provided on the command line. This means we don't need to copy the image into a temporary file. We just keep track of the file descriptor and offset within the source file on a per-chunk basis. For streams (pipes, sockets, fifos, etc) we now use the temporary file as a swap file. We read from the input file and create a chunk of type "zeroes" for each sequence of zeroes that's a multiple of the sector size. Otherwise, we allocte from the swap file, mmap(2) it, read into the mmap(2)'d memory and create a chunk representing data. For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files eficiently and create a chunk of type zeroes for holes and a chunk of type data for data regions. For data regions, we still compare the bytes we read to handle differences between a file system's block size and our sector size. After reading all files, image_write() is used by schemes to scribble in the reserved sectors. Since this never amounts to much, keep this data in memory in chunks of exactly 1 sector. The output image is created by looking using the chunk list to find the data and write it out to the output file. For chunks of type "zeroes" we prefer to seek, but fall back to writing zeroes to handle pipes. For chunks of type "file" and "memoty" we simply write. The net effect of this is that for reasonably large images the execution time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about 5 to 8 times, depending on partition sizes, output format whether in input files are sparse or not. Bump version to 20141001.
2014-10-01 21:03:17 +00:00
image_swap_fd = mkstemp(image_swap_file);
if (image_swap_fd == -1)
return (errno);
return (0);
}