d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
79f27053e4
freebsd-skq/sys/conf/options.arm64

34 lines
776 B
Plaintext
Raw Normal View History

Bring in the start of the arm64 kernel. This is only the minimum set of files needed to boot in qemu. As such it is missing a few things. The bus_dma code is currently only stub functions with a full implementation from the development tree to follow. The gic driver has been copied as the interrupt framework is different. It is expected the two drivers will be merged by the arm intrng project, however this will need to be imported into the tree and support for arm64 would need to be added. This includes code developed by myself, SemiHalf, Ed Maste, and Robin Randhawa from ARM. This has been funded by the FreeBSD Foundation, with early development by myself in my spare time with assistance from Robin. Differential Revision: https://reviews.freebsd.org/D2199 Reviewed by: emaste, imp Relnotes: yes Sponsored by: The FreeBSD Foundation
2015-04-13 14:43:10 +00:00
# $FreeBSD$
Apply erratum for mrs ICC_IAR1_EL1 speculative execution on ThunderX ERRATUM: 22978, 23154 PASS (rev.): 1.0/1.1 Reviewed by: imp Obtained from: Semihalf Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D3184
2015-07-31 10:00:45 +00:00
ARM64 opt_global.h
Add support for intrng to arm64. As the GICv3 drivers will need to be updated, and until further testing can be done, this is disabled for now. It is expected arm64 will switch to this interface, and the old interface will be removed before 11.0 is released. Obtained from: ABT Systems Ltd Relnotes: yes Sponsored by: The FreeBSD Foundation
2016-05-16 10:48:51 +00:00
INTRNG opt_global.h
Apply erratum for mrs ICC_IAR1_EL1 speculative execution on ThunderX ERRATUM: 22978, 23154 PASS (rev.): 1.0/1.1 Reviewed by: imp Obtained from: Semihalf Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D3184
2015-07-31 10:00:45 +00:00
SOCDEV_PA opt_global.h
THUNDERX_PASS_1_1_ERRATA opt_global.h
VFP opt_global.h
Add support for booting kernel directly from U-Boot using booti command. In some cases, like is locked bootstrap or device's inability to boot from removable media, we cannot use standard boot sequence and is necessary to boot kernel directly from U-Boot. Discussed with: jhibbits MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D13861
2019-12-07 16:14:23 +00:00
LINUX_BOOT_ABI opt_global.h
Dynamically select LSE-based atomic(9)s on arm64. Once all CPUs are online, determine if they all support LSE atomics and set lse_supported to indicate this. For now the atomic(9) implementations are still always inlined, though it would be preferable to create out-of-line functions to avoid text bloat. This was not done here since big.little systems exist in which some CPUs implement LSE while others do not, and ifunc resolution must occur well before this scenario can be detected. It does seem unlikely that FreeBSD will ever run on such platforms, however, so converting atomic(9) to use ifuncs is probably a good next step. Add a LSE_ATOMICS arm64 kernel configuration option to unconditionally select LSE-based atomic(9) implementations when the target system is known. Reviewed by: andrew, kib MFC after: 1 month Sponsored by: The FreeBSD Foundation, Amazon (hardware) Differential Revision: https://reviews.freebsd.org/D23325
2020-02-03 18:23:50 +00:00
LSE_ATOMICS opt_global.h
Add an option to select which SoCs we are building for. It is intended to be used with any SoC specific drivers, for example a ThunderX nic driver would use something like the following in files.arm64: arm64/cavium/thunder_nic.c optional soc_cavm_thunderx thndr_nic Reviewed by: imp Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D3479
2015-08-26 11:36:23 +00:00
Add rudimentary support for building FreeBSD/arm64 with COMPAT_FREEBSD32. Right now I'm using two Raspberry Pi's (2 and 3) to test CloudABI support for armv6, armv7 and aarch64. It would be nice if I could restrict this to just a single instance when testing smaller changes. This is why I'd like to get COMPAT_CLOUDABI32 to work on arm64. As COMPAT_CLOUDABI32 depends on COMPAT_FREEBSD32, at least for the ELF loading, this change adds all of the bits necessary to at least build a kernel with COMPAT_FREEBSD32. All of the machine dependent system calls are still stubbed out, for the reason that implementations for these are only useful if actual support for running FreeBSD binaries is added. This is outside the scope of this work. Reviewed by: andrew Differential Revision: https://reviews.freebsd.org/D13144
2017-11-24 13:50:53 +00:00
# Binary compatibility
Move most of the contents of opt_compat.h to opt_global.h. opt_compat.h is mentioned in nearly 180 files. In-progress network driver compabibility improvements may add over 100 more so this is closer to "just about everywhere" than "only some files" per the guidance in sys/conf/options. Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h is created on all architectures. Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the set of compiled files. Reviewed by: kib, cem, jhb, jtl Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D14941
2018-04-06 17:35:35 +00:00
COMPAT_FREEBSD32 opt_global.h
Add rudimentary support for building FreeBSD/arm64 with COMPAT_FREEBSD32. Right now I'm using two Raspberry Pi's (2 and 3) to test CloudABI support for armv6, armv7 and aarch64. It would be nice if I could restrict this to just a single instance when testing smaller changes. This is why I'd like to get COMPAT_CLOUDABI32 to work on arm64. As COMPAT_CLOUDABI32 depends on COMPAT_FREEBSD32, at least for the ELF loading, this change adds all of the bits necessary to at least build a kernel with COMPAT_FREEBSD32. All of the machine dependent system calls are still stubbed out, for the reason that implementations for these are only useful if actual support for running FreeBSD binaries is added. This is outside the scope of this work. Reviewed by: andrew Differential Revision: https://reviews.freebsd.org/D13144
2017-11-24 13:50:53 +00:00
Support the EFI Runtime Services on arm64. As with amd64 we use the 1:1 mapping. This uses the new common code shared with amd64. The RTC should only be accessed via EFI. There is no locking around it as the spec only has this as a requirement for the PC-AT CMOS device. Reviewed by: kib, imp Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D12595
2017-10-10 13:05:26 +00:00
# EFI Runtime services support
EFIRT opt_efirt.h
Add an option to select which SoCs we are building for. It is intended to be used with any SoC specific drivers, for example a ThunderX nic driver would use something like the following in files.arm64: arm64/cavium/thunder_nic.c optional soc_cavm_thunderx thndr_nic Reviewed by: imp Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D3479
2015-08-26 11:36:23 +00:00
# SoC Support
Add SOC_ALLWINNER_A64 option for Allwinner A64 (sun50i) SoCs.
2016-07-11 20:05:03 +00:00
SOC_ALLWINNER_A64 opt_soc.h
arm64: Add Allwinner H5 SoC Allwinner H5 is an H3 (arm32) with Cortex A53 cores. Add support for it and enable it in GENERIC kernel config Tested on: OrangePi PC2
2017-08-02 20:19:19 +00:00
SOC_ALLWINNER_H5 opt_soc.h
arm64: allwinner: Add Allwinner H6 Support This adds support for H6 SoC. Add a CCU driver for H6 that support all PLLs and most of the clocks that we are intersted in for now (i2c, mmc, usb, etc ...) MFC after: 1 month
2019-10-14 21:53:53 +00:00
SOC_ALLWINNER_H6 opt_soc.h
Make BRCM2837 port conform FreeBSD/ARM64 guidelines - Rename SOC_BCM2837 to SOC_BRCM_BCM2837, put it to opt_soc.h - do not use files.XXX files, just move required sources to conf/files.arm64 and make them depend on soc_brcm_bcm2837 Suggested by: andrew
2016-10-14 22:23:03 +00:00
SOC_BRCM_BCM2837 opt_soc.h
arm64: add SOC_BRCM_BCM2838, build it in GENERIC BCM2838/BCM2711 is the Raspberry Pi 4, which we will soon be able to boot on once some ports bits are worked out.
2019-11-10 01:43:51 +00:00
SOC_BRCM_BCM2838 opt_soc.h
arm64: Add a SOC_BRCM_NS2 option Only compile files needed for this platform if the option is enabled in the kernel config file. Add the option to GENERIC. MFC after: 3 days
2021-02-04 14:40:54 +00:00
SOC_BRCM_NS2 opt_soc.h
Add an option to select which SoCs we are building for. It is intended to be used with any SoC specific drivers, for example a ThunderX nic driver would use something like the following in files.arm64: arm64/cavium/thunder_nic.c optional soc_cavm_thunderx thndr_nic Reviewed by: imp Sponsored by: ABT Systems Ltd Differential Revision: https://reviews.freebsd.org/D3479
2015-08-26 11:36:23 +00:00
SOC_CAVM_THUNDERX opt_soc.h
Add i.MX 8M Quad support - Add CCM driver and clocks implementations for i.MX 8M - Add GPC driver for iMX8 - Add clock tree for i.MX 8M Quad - Add clocks support and new compat strings (where required) for existing i.MX 6 UART, I2C, and GPIO drivers - Enable aarch64-compatible drivers form i.MX 6 in arm64 GENERIC kernel config - Add dtb/imx8 kernel module with DTBs for Nitrogen8M and iMX8MQ EVK With this patch both Nitrogen8M and iMX8MQ EVK boot with NFS root up to multiuser login prompt Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D25274
2020-07-01 00:33:16 +00:00
SOC_FREESCALE_IMX8 opt_soc.h
Add the SOC_HISI_HI6220 option. This will be used to enable drivers for the HiSilicon hi6220 SoC used in the HiKey 96boards board. Sponsored by: ABT Systems Ltd
2015-08-26 18:09:17 +00:00
SOC_HISI_HI6220 opt_soc.h
Add support for Intel Stratix 10 platform. Intel Stratix 10 SoC includes a quad-core arm64 cluster and FPGA fabric. This adds support for reconfiguring FPGA. Accessing FPGA core of this SoC require the level of privilege EL3, while kernel runs in EL1 (lower) level of privilege. This provides an Intel service layer interface that uses SMCCC to pass queries to the secure-monitor (EL3). Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D21454
2019-09-13 16:50:57 +00:00
SOC_INTEL_STRATIX10 opt_soc.h
arm64: Add new SoC type MARVELL_8K Sponsored by: Rubicon Communications, LLC ("Netgate")
2018-12-12 21:58:30 +00:00
SOC_MARVELL_8K opt_soc.h
ARM64: Port FreeBSD to Nvidia Jetson TX1 and Nano. Add support for the Tergra210 SoC and its companion PMIC MAX77620.
2018-01-04 12:18:24 +00:00
SOC_NVIDIA_TEGRA210 opt_soc.h
Add LS1046A clockgen driver. Driver provides probe and attach functions for LS1046A clockgen and passes configuration information to QorIQ clockgen class. It may be used as a reference implementation for different QorIQ clockgen devices. Submitted by: Dawid Gorecki <dgr@semihalf.com> Reviewed by: mmel, manu Obtained from: Semihalf Sponsored by: Alstom Group Differential Revision: https://reviews.freebsd.org/D24352
2020-05-25 14:45:18 +00:00
SOC_NXP_LS opt_soc.h
rk3328: Add support for this SoC * rk_cru is a cru driver that needs to be subclassed by the real CRU driver * rk_clk_pll handle the pll type clock on RockChip SoC, it's only read only for now. * rk_clk_composite handle the different composite clock types (with gate, with mux etc ...) * rk_clk_gate handle the RockChip gates * rk_clk_mux handle the RockChip muxes (unused for now) * Only clocks for supported devices are supported for now, the rest will be added when driver support comes * The assigned-clock* property are not handled for now so we rely a lot on the bootloader to setup some initial values for some clocks.
2018-02-26 21:25:50 +00:00
SOC_ROCKCHIP_RK3328 opt_soc.h
arm64/rockchip: add RK3399 support Add CRU (Clock and Reset Unit) driver for RK3399. Add support in rk_pinctrl driver. Submitted by: Greg V <greg@unrelenting.technology> (Original version) Differential Revision: https://reviews.freebsd.org/D16732 MFC after: 1 month
2018-12-01 20:28:16 +00:00
SOC_ROCKCHIP_RK3399 opt_soc.h
Enable UART support for Xilinx Ultrascale+ SoCs Xilinx Ultrascale+ are based on Cortex-A53 and use existing UART driver (uart_dev_cdnc). Enable it in arm64 GENERIC config. Submitted by: Michal Stanek <mst@semihalf.com> Obtained from: Semihalf
2018-07-13 19:54:22 +00:00
SOC_XILINX_ZYNQ opt_soc.h
Reference in New Issue Copy Permalink