521 lines
16 KiB
C
521 lines
16 KiB
C
|
/*-
|
||
|
|
* Copyright (c) 2010 Spectra Logic Corporation
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without
|
||
|
|
* modification, are permitted provided that the following conditions
|
||
|
|
* are met:
|
||
|
|
* 1. Redistributions of source code must retain the above copyright
|
||
|
|
* notice, this list of conditions, and the following disclaimer,
|
||
|
|
* without modification.
|
||
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
||
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
||
|
|
* ("Disclaimer") and any redistribution must be conditioned upon
|
||
|
|
* including a substantially similar Disclaimer requirement for further
|
||
|
|
* binary redistribution.
|
||
|
|
*
|
||
|
|
* NO WARRANTY
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
|
||
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
||
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
|
|
* POSSIBILITY OF SUCH DAMAGES.
|
||
|
|
*
|
||
|
|
* $Id: //depot/users/kenm/FreeBSD-test/sys/cam/scsi/smp_all.h#4 $
|
||
|
|
* $FreeBSD$
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Serial Management Protocol definitions.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef _SCSI_SMP_ALL_H
|
||
|
|
#define _SCSI_SMP_ALL_H 1
|
||
|
|
|
||
|
|
#define SMP_FRAME_TYPE_REQUEST 0x40
|
||
|
|
#define SMP_FRAME_TYPE_RESPONSE 0x41
|
||
|
|
#define SMP_WORD_LEN 4
|
||
|
|
#define SMP_CRC_LEN 4
|
||
|
|
|
||
|
|
/*
|
||
|
|
* SMP Functions (current as of SPL Revision 7)
|
||
|
|
*/
|
||
|
|
/* 0x00 to 0x7f: SMP input functions */
|
||
|
|
/* 0x00 to 0x0f: General SMP input functions */
|
||
|
|
#define SMP_FUNC_REPORT_GENERAL 0x00
|
||
|
|
#define SMP_FUNC_REPORT_MANUF_INFO 0x01
|
||
|
|
#define SMP_FUNC_REPORT_SC_STATUS 0x03
|
||
|
|
#define SMP_FUNC_REPORT_ZONE_PERM_TBL 0x04
|
||
|
|
#define SMP_FUNC_REPORT_ZONE_MAN_PWD 0x05
|
||
|
|
#define SMP_FUNC_REPORT_BROADCAST 0x06
|
||
|
|
|
||
|
|
/* 0x10 to 0x1f: Phy-based SMP input functions */
|
||
|
|
#define SMP_FUNC_DISCOVER 0x10
|
||
|
|
#define SMP_FUNC_REPORT_PHY_ERR_LOG 0x11
|
||
|
|
#define SMP_FUNC_REPORT_PHY_SATA 0x12
|
||
|
|
#define SMP_FUNC_REPORT_ROUTE_INFO 0x13
|
||
|
|
#define SMP_FUNC_REPORT_PHY_EVENT 0x14
|
||
|
|
|
||
|
|
/* 0x20 to 0x2f: Descriptor list-based SMP input functions */
|
||
|
|
#define SMP_FUNC_DISCOVER_LIST 0x20
|
||
|
|
#define SMP_FUNC_REPORT_PHY_EVENT_LIST 0x21
|
||
|
|
#define SMP_FUNC_REPORT_EXP_RTL 0x22
|
||
|
|
|
||
|
|
/* 0x30 to 0x3f: Reserved for SMP input functions */
|
||
|
|
/* 0x40 to 0x7f: Vendor specific */
|
||
|
|
|
||
|
|
/* 0x80 to 0xff: SMP output functions */
|
||
|
|
/* 0x80 to 0x8f: General SMP output functions */
|
||
|
|
#define SMP_FUNC_CONFIG_GENERAL 0x80
|
||
|
|
#define SMP_FUNC_ENABLE_DISABLE_ZONING 0x81
|
||
|
|
#define SMP_FUNC_ZONED_BROADCAST 0x85
|
||
|
|
#define SMP_FUNC_ZONE_LOCK 0x86
|
||
|
|
#define SMP_FUNC_ZONE_ACTIVATE 0x87
|
||
|
|
#define SMP_FUNC_ZONE_UNLOCK 0x88
|
||
|
|
#define SMP_FUNC_CONFIG_ZM_PWD 0x89
|
||
|
|
#define SMP_FUNC_CONFIG_ZONE_PHY_INFO 0x8a
|
||
|
|
#define SMP_FUNC_CONFIG_ZONE_PERM_TBL 0x8b
|
||
|
|
|
||
|
|
/* 0x90 to 0x9f: Phy-based SMP output functions */
|
||
|
|
#define SMP_FUNC_CONFIG_ROUTE_INFO 0x90
|
||
|
|
#define SMP_FUNC_PHY_CONTROL 0x91
|
||
|
|
#define SMP_FUNC_PHY_TEST_FUNC 0x92
|
||
|
|
#define SMP_FUNC_CONFIG_PHY_EVENT 0x93
|
||
|
|
|
||
|
|
/* 0xa0 to 0xbf: Reserved for SMP output functions */
|
||
|
|
/* 0xc0 to 0xff: Vendor specific */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Function Results (current as of SPL Revision 7)
|
||
|
|
*/
|
||
|
|
#define SMP_FR_ACCEPTED 0x00
|
||
|
|
#define SMP_FR_UNKNOWN_FUNC 0x01
|
||
|
|
#define SMP_FR_FUNCTION_FAILED 0x02
|
||
|
|
#define SMP_FR_INVALID_REQ_FRAME_LEN 0x03
|
||
|
|
#define SMP_FR_INVALID_EXP_CHG_CNT 0x04
|
||
|
|
#define SMP_FR_BUSY 0x05
|
||
|
|
#define SMP_FR_INCOMPLETE_DESC_LIST 0x06
|
||
|
|
#define SMP_FR_PHY_DOES_NOT_EXIST 0x10
|
||
|
|
#define SMP_FR_INDEX_DOES_NOT_EXIST 0x11
|
||
|
|
#define SMP_FR_PHY_DOES_NOT_SUP_SATA 0x12
|
||
|
|
#define SMP_FR_UNKNOWN_PHY_OP 0x13
|
||
|
|
#define SMP_FR_UNKNOWN_PHY_TEST_FUNC 0x14
|
||
|
|
#define SMP_FR_PHY_TEST_FUNC_INPROG 0x15
|
||
|
|
#define SMP_FR_PHY_VACANT 0x16
|
||
|
|
#define SMP_FR_UNKNOWN_PHY_EVENT_SRC 0x17
|
||
|
|
#define SMP_FR_UNKNOWN_DESC_TYPE 0x18
|
||
|
|
#define SMP_FR_UNKNOWN_PHY_FILTER 0x19
|
||
|
|
#define SMP_FR_AFFILIATION_VIOLATION 0x1a
|
||
|
|
#define SMP_FR_SMP_ZONE_VIOLATION 0x20
|
||
|
|
#define SMP_FR_NO_MGMT_ACCESS_RIGHTS 0x21
|
||
|
|
#define SMP_FR_UNKNOWN_ED_ZONING_VAL 0x22
|
||
|
|
#define SMP_FR_ZONE_LOCK_VIOLATION 0x23
|
||
|
|
#define SMP_FR_NOT_ACTIVATED 0x24
|
||
|
|
#define SMP_FR_ZG_OUT_OF_RANGE 0x25
|
||
|
|
#define SMP_FR_NO_PHYS_PRESENCE 0x26
|
||
|
|
#define SMP_FR_SAVING_NOT_SUP 0x27
|
||
|
|
#define SMP_FR_SRC_ZONE_DNE 0x28
|
||
|
|
#define SMP_FR_DISABLED_PWD_NOT_SUP 0x29
|
||
|
|
|
||
|
|
/*
|
||
|
|
* REPORT GENERAL request and response, current as of SPL Revision 7.
|
||
|
|
*/
|
||
|
|
struct smp_report_general_request
|
||
|
|
{
|
||
|
|
uint8_t frame_type;
|
||
|
|
uint8_t function;
|
||
|
|
uint8_t response_len;
|
||
|
|
uint8_t request_len;
|
||
|
|
uint8_t crc[4];
|
||
|
|
};
|
||
|
|
|
||
|
|
struct smp_report_general_response
|
||
|
|
{
|
||
|
|
uint8_t frame_type;
|
||
|
|
uint8_t function;
|
||
|
|
uint8_t function_result;
|
||
|
|
uint8_t response_len;
|
||
|
|
#define SMP_RG_RESPONSE_LEN 0x11
|
||
|
|
uint8_t expander_change_count[2];
|
||
|
|
uint8_t expander_route_indexes[2];
|
||
|
|
uint8_t long_response;
|
||
|
|
#define SMP_RG_LONG_RESPONSE 0x80
|
||
|
|
uint8_t num_phys;
|
||
|
|
uint8_t config_bits0;
|
||
|
|
#define SMP_RG_TABLE_TO_TABLE_SUP 0x80
|
||
|
|
#define SMP_RG_ZONE_CONFIGURING 0x40
|
||
|
|
#define SMP_RG_SELF_CONFIGURING 0x20
|
||
|
|
#define SMP_RG_STP_CONTINUE_AWT 0x10
|
||
|
|
#define SMP_RG_OPEN_REJECT_RETRY_SUP 0x08
|
||
|
|
#define SMP_RG_CONFIGURES_OTHERS 0x04
|
||
|
|
#define SMP_RG_CONFIGURING 0x02
|
||
|
|
#define SMP_RG_EXT_CONFIG_ROUTE_TABLE 0x01
|
||
|
|
uint8_t reserved0;
|
||
|
|
uint8_t encl_logical_id[8];
|
||
|
|
uint8_t reserved1[8];
|
||
|
|
uint8_t reserved2[2];
|
||
|
|
uint8_t stp_bus_inact_time_limit[2];
|
||
|
|
uint8_t stp_max_conn_time_limit[2];
|
||
|
|
uint8_t stp_smp_it_nexus_loss_time[2];
|
||
|
|
uint8_t config_bits1;
|
||
|
|
#define SMP_RG_NUM_ZONE_GROUPS_MASK 0xc0
|
||
|
|
#define SMP_RG_NUM_ZONE_GROUPS_SHIFT 6
|
||
|
|
#define SMP_RG_ZONE_LOCKED 0x10
|
||
|
|
#define SMP_RG_PP_SUPPORTED 0x08
|
||
|
|
#define SMP_RG_PP_ASSERTED 0x04
|
||
|
|
#define SMP_RG_ZONING_SUPPORTED 0x02
|
||
|
|
#define SMP_RG_ZONING_ENABLED 0x01
|
||
|
|
uint8_t config_bits2;
|
||
|
|
#define SMP_RG_SAVING 0x10
|
||
|
|
#define SMP_RG_SAVING_ZM_PWD_SUP 0x08
|
||
|
|
#define SMP_RG_SAVING_PHY_INFO_SUP 0x04
|
||
|
|
#define SMP_RG_SAVING_ZPERM_TAB_SUP 0x02
|
||
|
|
#define SMP_RG_SAVING_ZENABLED_SUP 0x01
|
||
|
|
uint8_t max_num_routed_addrs[2];
|
||
|
|
uint8_t active_zm_address[8];
|
||
|
|
uint8_t zone_lock_inact_time_limit[2];
|
||
|
|
uint8_t reserved3[2];
|
||
|
|
uint8_t reserved4;
|
||
|
|
uint8_t first_encl_conn_el_index;
|
||
|
|
uint8_t num_encl_conn_el_indexes;
|
||
|
|
uint8_t reserved5;
|
||
|
|
uint8_t reduced_functionality;
|
||
|
|
#define SMP_RG_REDUCED_FUNCTIONALITY 0x80
|
||
|
|
uint8_t time_to_reduced_func;
|
||
|
|
uint8_t initial_time_to_reduced_func;
|
||
|
|
uint8_t max_reduced_func_time;
|
||
|
|
uint8_t last_sc_stat_desc_index[2];
|
||
|
|
uint8_t max_sc_stat_descs[2];
|
||
|
|
uint8_t last_phy_evl_desc_index[2];
|
||
|
|
uint8_t max_stored_pel_descs[2];
|
||
|
|
uint8_t stp_reject_to_open_limit[2];
|
||
|
|
uint8_t reserved6[2];
|
||
|
|
uint8_t crc[4];
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* REPORT MANUFACTURER INFORMATION request and response, current as of SPL
|
||
|
|
* Revision 7.
|
||
|
|
*/
|
||
|
|
struct smp_report_manuf_info_request
|
||
|
|
{
|
||
|
|
uint8_t frame_type;
|
||
|
|
uint8_t function;
|
||
|
|
uint8_t response_len;
|
||
|
|
uint8_t request_len;
|
||
|
|
#define SMP_RMI_REQUEST_LEN 0x00
|
||
|
|
uint8_t crc[4];
|
||
|
|
};
|
||
|
|
|
||
|
|
struct smp_report_manuf_info_response
|
||
|
|
{
|
||
|
|
uint8_t frame_type;
|
||
|
|
uint8_t function;
|
||
|
|
uint8_t function_result;
|
||
|
|
uint8_t response_len;
|
||
|
|
#define SMP_RMI_RESPONSE_LEN 0x0e
|
||
|
|
uint8_t expander_change_count[2];
|
||
|
|
uint8_t reserved0[2];
|
||
|
|
uint8_t sas_11_format;
|
||
|
|
#define SMP_RMI_SAS11_FORMAT 0x01
|
||
|
|
uint8_t reserved1[3];
|
||
|
|
uint8_t vendor[8];
|
||
|
|
uint8_t product[16];
|
||
|
|
uint8_t revision[4];
|
||
|
|
uint8_t comp_vendor[8];
|
||
|
|
uint8_t comp_id[2];
|
||
|
|
uint8_t comp_revision;
|
||
|
|
uint8_t reserved2;
|
||
|
|
uint8_t vendor_specific[8];
|
||
|
|
uint8_t crc[4];
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* DISCOVER request and response, current as of SPL Revision 7.
|
||
|
|
*/
|
||
|
|
struct smp_discover_request
|
||
|
|
{
|
||
|
|
uint8_t frame_type;
|
||
|
|
uint8_t function;
|
||
|
|
uint8_t response_len;
|
||
|
|
uint8_t request_len;
|
||
|
|
#define SMP_DIS_REQUEST_LEN 0x02
|
||
|
|
uint8_t reserved0[4];
|
||
|
|
uint8_t ignore_zone_group;
|
||
|
|
#define SMP_DIS_IGNORE_ZONE_GROUP 0x01
|
||
|
|
uint8_t phy;
|
||
|
|
uint8_t reserved1[2];
|
||
|
|
uint8_t crc[4];
|
||
|
|
};
|
||
|
|
|
||
|
|
struct smp_discover_response
|
||
|
|
{
|
||
|
|
uint8_t frame_type;
|
||
|
|
uint8_t function;
|
||
|
|
uint8_t function_result;
|
||
|
|
uint8_t response_len;
|
||
|
|
#define SMP_DIS_RESPONSE_LEN 0x20
|
||
|
|
uint8_t expander_change_count[2];
|
||
|
|
uint8_t reserved0[3];
|
||
|
|
uint8_t phy;
|
||
|
|
uint8_t reserved1[2];
|
||
|
|
uint8_t attached_device;
|
||
|
|
#define SMP_DIS_AD_TYPE_MASK 0x70
|
||
|
|
#define SMP_DIS_AD_TYPE_NONE 0x00
|
||
|
|
#define SMP_DIS_AD_TYPE_SAS_SATA 0x10
|
||
|
|
#define SMP_DIS_AD_TYPE_EXP 0x20
|
||
|
|
#define SMP_DIS_AD_TYPE_EXP_OLD 0x30
|
||
|
|
#define SMP_DIS_ATTACH_REASON_MASK 0x0f
|
||
|
|
uint8_t neg_logical_link_rate;
|
||
|
|
#define SMP_DIS_LR_MASK 0x0f
|
||
|
|
#define SMP_DIS_LR_DISABLED 0x01
|
||
|
|
#define SMP_DIS_LR_PHY_RES_PROB 0x02
|
||
|
|
#define SMP_DIS_LR_SPINUP_HOLD 0x03
|
||
|
|
#define SMP_DIS_LR_PORT_SEL 0x04
|
||
|
|
#define SMP_DIS_LR_RESET_IN_PROG 0x05
|
||
|
|
#define SMP_DIS_LR_UNSUP_PHY_ATTACHED 0x06
|
||
|
|
#define SMP_DIS_LR_G1_15GBPS 0x08
|
||
|
|
#define SMP_DIS_LR_G2_30GBPS 0x09
|
||
|
|
#define SMP_DIS_LR_G3_60GBPS 0x0a
|
||
|
|
uint8_t config_bits0;
|
||
|
|
#define SMP_DIS_ATTACHED_SSP_INIT 0x08
|
||
|
|
#define SMP_DIS_ATTACHED_STP_INIT 0x04
|
||
|
|
#define SMP_DIS_ATTACHED_SMP_INIT 0x02
|
||
|
|
#define SMP_DIS_ATTACHED_SATA_HOST 0x01
|
||
|
|
uint8_t config_bits1;
|
||
|
|
#define SMP_DIS_ATTACHED_SATA_PORTSEL 0x80
|
||
|
|
#define SMP_DIS_STP_BUFFER_TOO_SMALL 0x10
|
||
|
|
#define SMP_DIS_ATTACHED_SSP_TARG 0x08
|
||
|
|
#define SMP_DIS_ATTACHED_STP_TARG 0x04
|
||
|
|
#define SMP_DIS_ATTACHED_SMP_TARG 0x02
|
||
|
|
#define SMP_DIS_ATTACHED_SATA_DEV 0x01
|
||
|
|
uint8_t sas_address[8];
|
||
|
|
uint8_t attached_sas_address[8];
|
||
|
|
uint8_t attached_phy_id;
|
||
|
|
uint8_t config_bits2;
|
||
|
|
#define SMP_DIS_ATT_SLUMB_CAP 0x10
|
||
|
|
#define SMP_DIS_ATT_PAR_CAP 0x08
|
||
|
|
#define SMP_DIS_ATT_IN_ZPSDS_PER 0x04
|
||
|
|
#define SMP_DIS_ATT_REQ_IN_ZPSDS 0x02
|
||
|
|
#define SMP_DIS_ATT_BREAK_RPL_CAP 0x01
|
||
|
|
uint8_t reserved2[6];
|
||
|
|
uint8_t link_rate0;
|
||
|
|
#define SMP_DIS_PROG_MIN_LR_MASK 0xf0
|
||
|
|
#define SMP_DIS_PROG_MIN_LR_SHIFT 4
|
||
|
|
#define SMP_DIS_HARD_MIN_LR_MASK 0x0f
|
||
|
|
uint8_t link_rate1;
|
||
|
|
#define SMP_DIS_PROG_MAX_LR_MAX 0xf0
|
||
|
|
#define SMP_DIS_PROG_MAX_LR_SHIFT 4
|
||
|
|
#define SMP_DIS_HARD_MAX_LR_MASK 0x0f
|
||
|
|
uint8_t phy_change_count;
|
||
|
|
uint8_t pp_timeout;
|
||
|
|
#define SMP_DIS_VIRTUAL_PHY 0x80
|
||
|
|
#define SMP_DIS_PP_TIMEOUT_MASK 0x0f
|
||
|
|
uint8_t routing_attr;
|
||
|
|
uint8_t conn_type;
|
||
|
|
uint8_t conn_el_index;
|
||
|
|
uint8_t conn_phys_link;
|
||
|
|
uint8_t config_bits3;
|
||
|
|
#define SMP_DIS_PHY_POW_COND_MASK 0xc0
|
||
|
|
#define SMP_DIS_PHY_POW_COND_SHIFT 6
|
||
|
|
#define SMP_DIS_SAS_SLUMB_CAP 0x08
|
||
|
|
#define SMP_DIS_SAS_PART_CAP 0x04
|
||
|
|
#define SMP_DIS_SATA_SLUMB_CAP 0x02
|
||
|
|
#define SMP_DIS_SATA_PART_CAP 0x01
|
||
|
|
uint8_t config_bits4;
|
||
|
|
#define SMP_DIS_SAS_SLUMB_ENB 0x08
|
||
|
|
#define SMP_DIS_SAS_PART_ENB 0x04
|
||
|
|
#define SMP_DIS_SATA_SLUMB_ENB 0x02
|
||
|
|
#define SMP_DIS_SATA_PART_ENB 0x01
|
||
|
|
uint8_t vendor_spec[2];
|
||
|
|
uint8_t attached_dev_name[8];
|
||
|
|
uint8_t config_bits5;
|
||
|
|
#define SMP_DIS_REQ_IN_ZPSDS_CHG 0x40
|
||
|
|
#define SMP_DIS_IN_ZPSDS_PER 0x20
|
||
|
|
#define SMP_DIS_REQ_IN_ZPSDS 0x10
|
||
|
|
#define SMP_DIS_ZG_PER 0x04
|
||
|
|
#define SMP_DIS_IN_ZPSDS 0x02
|
||
|
|
#define SMP_DIS_ZONING_ENB 0x01
|
||
|
|
uint8_t reserved3[2];
|
||
|
|
uint8_t zone_group;
|
||
|
|
uint8_t self_config_status;
|
||
|
|
uint8_t self_config_levels_comp;
|
||
|
|
uint8_t reserved4[2];
|
||
|
|
uint8_t self_config_sas_addr[8];
|
||
|
|
uint8_t prog_phy_cap[4];
|
||
|
|
uint8_t current_phy_cap[4];
|
||
|
|
uint8_t attached_phy_cap[4];
|
||
|
|
uint8_t reserved5[6];
|
||
|
|
uint8_t neg_phys_link_rate;
|
||
|
|
#define SMP_DIS_REASON_MASK 0xf0
|
||
|
|
#define SMP_DIS_REASON_SHIFT 4
|
||
|
|
#define SMP_DIS_PHYS_LR_MASK 0x0f
|
||
|
|
uint8_t config_bits6;
|
||
|
|
#define SMP_DIS_OPTICAL_MODE_ENB 0x04
|
||
|
|
#define SMP_DIS_NEG_SSC 0x02
|
||
|
|
#define SMP_DIS_HW_MUX_SUP 0x01
|
||
|
|
uint8_t config_bits7;
|
||
|
|
#define SMP_DIS_DEF_IN_ZPSDS_PER 0x20
|
||
|
|
#define SMP_DIS_DEF_REQ_IN_ZPSDS 0x10
|
||
|
|
#define SMP_DIS_DEF_ZG_PER 0x04
|
||
|
|
#define SMP_DIS_DEF_ZONING_ENB 0x01
|
||
|
|
uint8_t reserved6;
|
||
|
|
uint8_t reserved7;
|
||
|
|
uint8_t default_zone_group;
|
||
|
|
uint8_t config_bits8;
|
||
|
|
#define SMP_DIS_SAVED_IN_ZPSDS_PER 0x20
|
||
|
|
#define SMP_DIS_SAVED_REQ_IN_SPSDS 0x10
|
||
|
|
#define SMP_DIS_SAVED_ZG_PER 0x04
|
||
|
|
#define SMP_DIS_SAVED_ZONING_ENB 0x01
|
||
|
|
uint8_t reserved8;
|
||
|
|
uint8_t reserved9;
|
||
|
|
uint8_t saved_zone_group;
|
||
|
|
uint8_t config_bits9;
|
||
|
|
#define SMP_DIS_SHADOW_IN_ZPSDS_PER 0x20
|
||
|
|
#define SMP_DIS_SHADOW_IN_REQ_IN_ZPSDS 0x10
|
||
|
|
#define SMP_DIS_SHADOW_ZG_PER 0x04
|
||
|
|
uint8_t reserved10;
|
||
|
|
uint8_t reserved11;
|
||
|
|
uint8_t shadow_zone_group;
|
||
|
|
uint8_t device_slot_num;
|
||
|
|
uint8_t device_slot_group_num;
|
||
|
|
uint8_t device_slot_group_out_conn[6];
|
||
|
|
uint8_t stp_buffer_size[2];
|
||
|
|
uint8_t reserved12;
|
||
|
|
uint8_t reserved13;
|
||
|
|
uint8_t crc[4];
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* PHY CONTROL request and response. Current as of SPL Revision 7.
|
||
|
|
*/
|
||
|
|
struct smp_phy_control_request
|
||
|
|
{
|
||
|
|
uint8_t frame_type;
|
||
|
|
uint8_t function;
|
||
|
|
uint8_t response_len;
|
||
|
|
#define SMP_PC_RESPONSE_LEN 0x00
|
||
|
|
uint8_t request_len;
|
||
|
|
#define SMP_PC_REQUEST_LEN 0x09
|
||
|
|
uint8_t expected_exp_chg_cnt[2];
|
||
|
|
uint8_t reserved0[3];
|
||
|
|
uint8_t phy;
|
||
|
|
uint8_t phy_operation;
|
||
|
|
#define SMP_PC_PHY_OP_NOP 0x00
|
||
|
|
#define SMP_PC_PHY_OP_LINK_RESET 0x01
|
||
|
|
#define SMP_PC_PHY_OP_HARD_RESET 0x02
|
||
|
|
#define SMP_PC_PHY_OP_DISABLE 0x03
|
||
|
|
#define SMP_PC_PHY_OP_CLEAR_ERR_LOG 0x05
|
||
|
|
#define SMP_PC_PHY_OP_CLEAR_AFFILIATON 0x06
|
||
|
|
#define SMP_PC_PHY_OP_TRANS_SATA_PSS 0x07
|
||
|
|
#define SMP_PC_PHY_OP_CLEAR_STP_ITN_LS 0x08
|
||
|
|
#define SMP_PC_PHY_OP_SET_ATT_DEV_NAME 0x09
|
||
|
|
uint8_t update_pp_timeout;
|
||
|
|
#define SMP_PC_UPDATE_PP_TIMEOUT 0x01
|
||
|
|
uint8_t reserved1[12];
|
||
|
|
uint8_t attached_device_name[8];
|
||
|
|
uint8_t prog_min_phys_link_rate;
|
||
|
|
#define SMP_PC_PROG_MIN_PL_RATE_MASK 0xf0
|
||
|
|
#define SMP_PC_PROG_MIN_PL_RATE_SHIFT 4
|
||
|
|
uint8_t prog_max_phys_link_rate;
|
||
|
|
#define SMP_PC_PROG_MAX_PL_RATE_MASK 0xf0
|
||
|
|
#define SMP_PC_PROG_MAX_PL_RATE_SHIFT 4
|
||
|
|
uint8_t config_bits0;
|
||
|
|
#define SMP_PC_SP_NC 0x00
|
||
|
|
#define SMP_PC_SP_DISABLE 0x02
|
||
|
|
#define SMP_PC_SP_ENABLE 0x01
|
||
|
|
#define SMP_PC_SAS_SLUMBER_NC 0x00
|
||
|
|
#define SMP_PC_SAS_SLUMBER_DISABLE 0x80
|
||
|
|
#define SMP_PC_SAS_SLUMBER_ENABLE 0x40
|
||
|
|
#define SMP_PC_SAS_SLUMBER_MASK 0xc0
|
||
|
|
#define SMP_PC_SAS_SLUMBER_SHIFT 6
|
||
|
|
#define SMP_PC_SAS_PARTIAL_NC 0x00
|
||
|
|
#define SMP_PC_SAS_PARTIAL_DISABLE 0x20
|
||
|
|
#define SMP_PC_SAS_PARTIAL_ENABLE 0x10
|
||
|
|
#define SMP_PC_SAS_PARTIAL_MASK 0x30
|
||
|
|
#define SMP_PC_SAS_PARTIAL_SHIFT 4
|
||
|
|
#define SMP_PC_SATA_SLUMBER_NC 0x00
|
||
|
|
#define SMP_PC_SATA_SLUMBER_DISABLE 0x08
|
||
|
|
#define SMP_PC_SATA_SLUMBER_ENABLE 0x04
|
||
|
|
#define SMP_PC_SATA_SLUMBER_MASK 0x0c
|
||
|
|
#define SMP_PC_SATA_SLUMBER_SHIFT 2
|
||
|
|
#define SMP_PC_SATA_PARTIAL_NC 0x00
|
||
|
|
#define SMP_PC_SATA_PARTIAL_DISABLE 0x02
|
||
|
|
#define SMP_PC_SATA_PARTIAL_ENABLE 0x01
|
||
|
|
#define SMP_PC_SATA_PARTIAL_MASK 0x03
|
||
|
|
#define SMP_PC_SATA_PARTIAL_SHIFT 0
|
||
|
|
uint8_t reserved2;
|
||
|
|
uint8_t pp_timeout_value;
|
||
|
|
#define SMP_PC_PP_TIMEOUT_MASK 0x0f
|
||
|
|
uint8_t reserved3[3];
|
||
|
|
uint8_t crc[4];
|
||
|
|
};
|
||
|
|
|
||
|
|
struct smp_phy_control_response
|
||
|
|
{
|
||
|
|
uint8_t frame_type;
|
||
|
|
uint8_t function;
|
||
|
|
uint8_t function_result;
|
||
|
|
uint8_t response_len;
|
||
|
|
#define SMP_PC_RESPONSE_LEN 0x00
|
||
|
|
uint8_t crc[4];
|
||
|
|
};
|
||
|
|
|
||
|
|
__BEGIN_DECLS
|
||
|
|
|
||
|
|
const char *smp_error_desc(int function_result);
|
||
|
|
const char *smp_command_desc(uint8_t cmd_num);
|
||
|
|
void smp_command_decode(uint8_t *smp_request, int request_len, struct sbuf *sb,
|
||
|
|
char *line_prefix, int first_line_len, int line_len);
|
||
|
|
void smp_command_sbuf(struct ccb_smpio *smpio, struct sbuf *sb,
|
||
|
|
char *line_prefix, int first_line_len, int line_len);
|
||
|
|
|
||
|
|
#ifdef _KERNEL
|
||
|
|
void smp_error_sbuf(struct ccb_smpio *smpio, struct sbuf *sb);
|
||
|
|
#else /* !_KERNEL*/
|
||
|
|
void smp_error_sbuf(struct cam_device *device, struct ccb_smpio *smpio,
|
||
|
|
struct sbuf *sb);
|
||
|
|
#endif /* _KERNEL/!_KERNEL */
|
||
|
|
|
||
|
|
void smp_report_general_sbuf(struct smp_report_general_response *response,
|
||
|
|
int response_len, struct sbuf *sb);
|
||
|
|
|
||
|
|
void smp_report_manuf_info_sbuf(struct smp_report_manuf_info_response *response,
|
||
|
|
int response_len, struct sbuf *sb);
|
||
|
|
|
||
|
|
void smp_report_general(struct ccb_smpio *smpio, uint32_t retries,
|
||
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
||
|
|
struct smp_report_general_request *request,
|
||
|
|
int request_len, uint8_t *response, int response_len,
|
||
|
|
int long_response, uint32_t timeout);
|
||
|
|
|
||
|
|
void smp_discover(struct ccb_smpio *smpio, uint32_t retries,
|
||
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
||
|
|
struct smp_discover_request *request, int request_len,
|
||
|
|
uint8_t *response, int response_len, int long_response,
|
||
|
|
int ignore_zone_group, int phy, uint32_t timeout);
|
||
|
|
|
||
|
|
void smp_report_manuf_info(struct ccb_smpio *smpio, uint32_t retries,
|
||
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
||
|
|
struct smp_report_manuf_info_request *request,
|
||
|
|
int request_len, uint8_t *response, int response_len,
|
||
|
|
int long_response, uint32_t timeout);
|
||
|
|
|
||
|
|
void smp_phy_control(struct ccb_smpio *smpio, uint32_t retries,
|
||
|
|
void (*cbfcnp)(struct cam_periph *, union ccb *),
|
||
|
|
struct smp_phy_control_request *request, int request_len,
|
||
|
|
uint8_t *response, int response_len, int long_response,
|
||
|
|
uint32_t expected_exp_change_count, int phy, int phy_op,
|
||
|
|
int update_pp_timeout_val, uint64_t attached_device_name,
|
||
|
|
int prog_min_prl, int prog_max_prl, int slumber_partial,
|
||
|
|
int pp_timeout_value, uint32_t timeout);
|
||
|
|
__END_DECLS
|
||
|
|
|
||
|
|
#endif /*_SCSI_SMP_ALL_H*/
|