freebsd-skq/sys/net80211/ieee80211_freebsd.c

353 lines
10 KiB
C
Raw Normal View History

/*-
2004-12-31 22:42:38 +00:00
* Copyright (c) 2003-2005 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* IEEE 802.11 support (FreeBSD-specific code)
*/
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/linker.h>
#include <sys/mbuf.h>
#include <sys/module.h>
#include <sys/proc.h>
#include <sys/sysctl.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_media.h>
#include <net/ethernet.h>
#include <net/route.h>
#include <net80211/ieee80211_var.h>
SYSCTL_NODE(_net, OID_AUTO, wlan, CTLFLAG_RD, 0, "IEEE 80211 parameters");
#ifdef IEEE80211_DEBUG
int ieee80211_debug = 0;
SYSCTL_INT(_net_wlan, OID_AUTO, debug, CTLFLAG_RW, &ieee80211_debug,
0, "debugging printfs");
#endif
static int
ieee80211_sysctl_inact(SYSCTL_HANDLER_ARGS)
{
int inact = (*(int *)arg1) * IEEE80211_INACT_WAIT;
int error;
error = sysctl_handle_int(oidp, &inact, 0, req);
if (error || !req->newptr)
return error;
*(int *)arg1 = inact / IEEE80211_INACT_WAIT;
return 0;
}
static int
ieee80211_sysctl_parent(SYSCTL_HANDLER_ARGS)
{
struct ieee80211com *ic = arg1;
const char *name = ic->ic_ifp->if_xname;
return SYSCTL_OUT(req, name, strlen(name));
}
void
ieee80211_sysctl_attach(struct ieee80211com *ic)
{
struct sysctl_ctx_list *ctx;
struct sysctl_oid *oid;
char num[14]; /* sufficient for 32 bits */
MALLOC(ctx, struct sysctl_ctx_list *, sizeof(struct sysctl_ctx_list),
M_DEVBUF, M_NOWAIT | M_ZERO);
if (ctx == NULL) {
if_printf(ic->ic_ifp, "%s: cannot allocate sysctl context!\n",
__func__);
return;
}
sysctl_ctx_init(ctx);
snprintf(num, sizeof(num), "%u", ic->ic_vap);
oid = SYSCTL_ADD_NODE(ctx, &SYSCTL_NODE_CHILDREN(_net, wlan),
OID_AUTO, num, CTLFLAG_RD, NULL, "");
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"%parent", CTLFLAG_RD, ic, 0, ieee80211_sysctl_parent, "A",
"parent device");
#ifdef IEEE80211_DEBUG
ic->ic_debug = ieee80211_debug;
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"debug", CTLFLAG_RW, &ic->ic_debug, 0,
"control debugging printfs");
#endif
/* XXX inherit from tunables */
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"inact_run", CTLTYPE_INT | CTLFLAG_RW, &ic->ic_inact_run, 0,
ieee80211_sysctl_inact, "I",
"station inactivity timeout (sec)");
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"inact_probe", CTLTYPE_INT | CTLFLAG_RW, &ic->ic_inact_probe, 0,
ieee80211_sysctl_inact, "I",
"station inactivity probe timeout (sec)");
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"inact_auth", CTLTYPE_INT | CTLFLAG_RW, &ic->ic_inact_auth, 0,
ieee80211_sysctl_inact, "I",
"station authentication timeout (sec)");
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"inact_init", CTLTYPE_INT | CTLFLAG_RW, &ic->ic_inact_init, 0,
ieee80211_sysctl_inact, "I",
"station initial state timeout (sec)");
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"driver_caps", CTLFLAG_RW, &ic->ic_caps, 0,
"driver capabilities");
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
"bmiss_max", CTLFLAG_RW, &ic->ic_bmiss_max, 0,
"consecutive beacon misses before scanning");
ic->ic_sysctl = ctx;
}
void
ieee80211_sysctl_detach(struct ieee80211com *ic)
{
if (ic->ic_sysctl != NULL) {
sysctl_ctx_free(ic->ic_sysctl);
ic->ic_sysctl = NULL;
}
}
int
ieee80211_node_dectestref(struct ieee80211_node *ni)
{
/* XXX need equivalent of atomic_dec_and_test */
atomic_subtract_int(&ni->ni_refcnt, 1);
return atomic_cmpset_int(&ni->ni_refcnt, 0, 1);
}
/*
* Allocate and setup a management frame of the specified
* size. We return the mbuf and a pointer to the start
* of the contiguous data area that's been reserved based
* on the packet length. The data area is forced to 32-bit
* alignment and the buffer length to a multiple of 4 bytes.
* This is done mainly so beacon frames (that require this)
* can use this interface too.
*/
struct mbuf *
ieee80211_getmgtframe(u_int8_t **frm, u_int pktlen)
{
struct mbuf *m;
u_int len;
/*
* NB: we know the mbuf routines will align the data area
* so we don't need to do anything special.
*/
/* XXX 4-address frame? */
len = roundup(sizeof(struct ieee80211_frame) + pktlen, 4);
KASSERT(len <= MCLBYTES, ("802.11 mgt frame too large: %u", len));
if (len < MINCLSIZE) {
m = m_gethdr(M_NOWAIT, MT_DATA);
/*
* Align the data in case additional headers are added.
* This should only happen when a WEP header is added
* which only happens for shared key authentication mgt
* frames which all fit in MHLEN.
*/
if (m != NULL)
MH_ALIGN(m, len);
} else
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
if (m != NULL) {
m->m_data += sizeof(struct ieee80211_frame);
*frm = m->m_data;
}
return m;
}
#include <sys/libkern.h>
void
get_random_bytes(void *p, size_t n)
{
u_int8_t *dp = p;
while (n > 0) {
u_int32_t v = arc4random();
size_t nb = n > sizeof(u_int32_t) ? sizeof(u_int32_t) : n;
bcopy(&v, dp, n > sizeof(u_int32_t) ? sizeof(u_int32_t) : n);
dp += sizeof(u_int32_t), n -= nb;
}
}
void
ieee80211_notify_node_join(struct ieee80211com *ic, struct ieee80211_node *ni, int newassoc)
{
struct ifnet *ifp = ic->ic_ifp;
struct ieee80211_join_event iev;
memset(&iev, 0, sizeof(iev));
if (ni == ic->ic_bss) {
IEEE80211_ADDR_COPY(iev.iev_addr, ni->ni_bssid);
rt_ieee80211msg(ifp, newassoc ?
RTM_IEEE80211_ASSOC : RTM_IEEE80211_REASSOC,
&iev, sizeof(iev));
if_link_state_change(ifp, LINK_STATE_UP);
} else {
IEEE80211_ADDR_COPY(iev.iev_addr, ni->ni_macaddr);
rt_ieee80211msg(ifp, newassoc ?
RTM_IEEE80211_JOIN : RTM_IEEE80211_REJOIN,
&iev, sizeof(iev));
}
}
void
ieee80211_notify_node_leave(struct ieee80211com *ic, struct ieee80211_node *ni)
{
struct ifnet *ifp = ic->ic_ifp;
struct ieee80211_leave_event iev;
if (ni == ic->ic_bss) {
rt_ieee80211msg(ifp, RTM_IEEE80211_DISASSOC, NULL, 0);
if_link_state_change(ifp, LINK_STATE_DOWN);
} else {
/* fire off wireless event station leaving */
memset(&iev, 0, sizeof(iev));
IEEE80211_ADDR_COPY(iev.iev_addr, ni->ni_macaddr);
rt_ieee80211msg(ifp, RTM_IEEE80211_LEAVE, &iev, sizeof(iev));
}
}
void
ieee80211_notify_scan_done(struct ieee80211com *ic)
{
struct ifnet *ifp = ic->ic_ifp;
IEEE80211_DPRINTF(ic, IEEE80211_MSG_SCAN,
"%s: notify scan done\n", ic->ic_ifp->if_xname);
/* dispatch wireless event indicating scan completed */
rt_ieee80211msg(ifp, RTM_IEEE80211_SCAN, NULL, 0);
}
void
ieee80211_notify_replay_failure(struct ieee80211com *ic,
const struct ieee80211_frame *wh, const struct ieee80211_key *k,
u_int64_t rsc)
{
struct ifnet *ifp = ic->ic_ifp;
IEEE80211_DPRINTF(ic, IEEE80211_MSG_CRYPTO,
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
"[%s] %s replay detected <rsc %ju, csc %ju, keyix %u rxkeyix %u>\n",
ether_sprintf(wh->i_addr2), k->wk_cipher->ic_name,
(intmax_t) rsc, (intmax_t) k->wk_keyrsc,
k->wk_keyix, k->wk_rxkeyix);
if (ifp != NULL) { /* NB: for cipher test modules */
struct ieee80211_replay_event iev;
IEEE80211_ADDR_COPY(iev.iev_dst, wh->i_addr1);
IEEE80211_ADDR_COPY(iev.iev_src, wh->i_addr2);
iev.iev_cipher = k->wk_cipher->ic_cipher;
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 18:46:36 +00:00
if (k->wk_rxkeyix != IEEE80211_KEYIX_NONE)
iev.iev_keyix = k->wk_rxkeyix;
else
iev.iev_keyix = k->wk_keyix;
iev.iev_keyrsc = k->wk_keyrsc;
iev.iev_rsc = rsc;
rt_ieee80211msg(ifp, RTM_IEEE80211_REPLAY, &iev, sizeof(iev));
}
}
void
ieee80211_notify_michael_failure(struct ieee80211com *ic,
const struct ieee80211_frame *wh, u_int keyix)
{
struct ifnet *ifp = ic->ic_ifp;
IEEE80211_DPRINTF(ic, IEEE80211_MSG_CRYPTO,
"[%s] michael MIC verification failed <keyix %u>\n",
ether_sprintf(wh->i_addr2), keyix);
ic->ic_stats.is_rx_tkipmic++;
if (ifp != NULL) { /* NB: for cipher test modules */
struct ieee80211_michael_event iev;
IEEE80211_ADDR_COPY(iev.iev_dst, wh->i_addr1);
IEEE80211_ADDR_COPY(iev.iev_src, wh->i_addr2);
iev.iev_cipher = IEEE80211_CIPHER_TKIP;
iev.iev_keyix = keyix;
rt_ieee80211msg(ifp, RTM_IEEE80211_MICHAEL, &iev, sizeof(iev));
}
}
void
ieee80211_load_module(const char *modname)
{
#ifdef notyet
struct thread *td = curthread;
if (suser(td) == 0 && securelevel_gt(td->td_ucred, 0) == 0) {
mtx_lock(&Giant);
(void) linker_load_module(modname, NULL, NULL, NULL, NULL);
mtx_unlock(&Giant);
}
#else
printf("%s: load the %s module by hand for now.\n", __func__, modname);
#endif
}
/*
* Module glue.
*
* NB: the module name is "wlan" for compatibility with NetBSD.
*/
static int
wlan_modevent(module_t mod, int type, void *unused)
{
switch (type) {
case MOD_LOAD:
if (bootverbose)
printf("wlan: <802.11 Link Layer>\n");
return 0;
case MOD_UNLOAD:
return 0;
}
return EINVAL;
}
static moduledata_t wlan_mod = {
"wlan",
wlan_modevent,
0
};
DECLARE_MODULE(wlan, wlan_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);
MODULE_VERSION(wlan, 1);
MODULE_DEPEND(wlan, ether, 1, 1, 1);