d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
82130df48c
freebsd-skq/sys/kern/vfs_subr.c

3274 lines
79 KiB
C
Raw Normal View History

BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Copyright (c) 1989, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* @(#)vfs_subr.c 8.31 (Berkeley) 5/26/95
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
/*
* External virtual filesystem routines
*/
Convert DDB to new-style option.
1996-01-04 21:13:23 +00:00
#include "opt_ddb.h"
Make the two calls from kern/* into softupdates #ifdef SOFTUPDATES, that is way cleaner than using the softupdates_stub stunt, which should be killed when convenient. Discussed with: mckusick
2000-07-03 13:26:54 +00:00
#include "opt_ffs.h"
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Separate the struct bio related stuff out of <sys/buf.h> into <sys/bio.h>. <sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall not be made a nested include according to bdes teachings on the subject of nested includes. Diskdrivers and similar stuff below specfs::strategy() should no longer need to include <sys/buf.> unless they need caching of data. Still a few bogus uses of struct buf to track down. Repocopy by: peter
2000-05-05 09:59:14 +00:00
#include <sys/bio.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/buf.h>
#include <sys/conf.h>
#include <sys/eventhandler.h>
Restored rev.1.31 which was clobbered by rev.1.69 (the big Lite2 merge). This fixes at least hanging in revoke(2) when a somewhat active slave pty is revoked. The hang made the window for the null pointer bug in ufsspec_{read,write} much larger. There are many other bugs in this area (revoke of an active fifo at best leaks memory...).
1998-12-24 12:07:16 +00:00
#include <sys/fcntl.h>
Fixed support for DIAGNOSTIC option. SYSCTL_INT() depends on kernel.h.
1995-11-16 09:45:23 +00:00
#include <sys/kernel.h>
Slight reorganization of kernel thread/process creation. Instead of using SYSINIT_KT() etc (which is a static, compile-time procedure), use a NetBSD-style kthread_create() interface. kproc_start is still available as a SYSINIT() hook. This allowed simplification of chunks of the sysinit code in the process. This kthread_create() is our old kproc_start internals, with the SYSINIT_KT fork hooks grafted in and tweaked to work the same as the NetBSD one. One thing I'd like to do shortly is get rid of nfsiod as a user initiated process. It makes sense for the nfs client code to create them on the fly as needed up to a user settable limit. This means that nfsiod doesn't need to be in /sbin and is always "available". This is a fair bit easier to do outside of the SYSINIT_KT() framework.
1999-07-01 13:21:46 +00:00
#include <sys/kthread.h>
Last major round (Unless Bruce thinks of somthing :-) of malloc changes. Distribute all but the most fundamental malloc types. This time I also remembered the trick to making things static: Put "static" in front of them. A couple of finer points by: bde
1997-10-12 20:26:33 +00:00
#include <sys/malloc.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/mount.h>
Change NDFREE() from a macro to a function for the time being; the macro version caused intolerable bloat (30k). I'm likely to revisit this with an attempt at a smarter macro. Bloat noticed by: bde
2000-01-08 16:20:06 +00:00
#include <sys/namei.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/stat.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/sysctl.h>
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
#include <sys/syslog.h>
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
#include <sys/vmmeter.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/vnode.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <vm/vm.h>
Untangled the vm.h include file spaghetti.
1995-12-07 12:48:31 +00:00
#include <vm/vm_object.h>
#include <vm/vm_extern.h>
Some performance improvements, and code cleanups (including changing our expensive OFF_TO_IDX to btoc whenever possible.)
1997-12-19 09:03:37 +00:00
#include <vm/pmap.h>
#include <vm/vm_map.h>
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
#include <vm/vm_page.h>
Remove references to vm_zone.h and switch over to the new uma API. Also, remove maxsockets. If you look carefully you'll notice that the old zone allocator never honored this anyway.
2002-03-20 04:09:59 +00:00
#include <vm/uma.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Last major round (Unless Bruce thinks of somthing :-) of malloc changes. Distribute all but the most fundamental malloc types. This time I also remembered the trick to making things static: Put "static" in front of them. A couple of finer points by: bde
1997-10-12 20:26:33 +00:00
static MALLOC_DEFINE(M_NETADDR, "Export Host", "Export host address structure");
Distribute and statizice a lot of the malloc M_* types. Substantial input from: bde
1997-10-11 18:31:40 +00:00
Remove __P.
2002-03-19 21:25:46 +00:00
static void addalias(struct vnode *vp, dev_t nvp_rdev);
static void insmntque(struct vnode *vp, struct mount *mp);
static void vclean(struct vnode *vp, int flags, struct thread *td);
Add vlruvp() routine - implements LRU operation for vnode recycling. We calculate a trigger point that both guarentees we will find a sufficient number of vnodes to recycle and prevents us from recycling vnodes with lots of resident pages. This particular section of code is designed to recycle vnodes, not do unnecessary frees of cached VM pages.
2002-01-10 18:31:53 +00:00
static void vlruvp(struct vnode *vp);
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
* Number of vnodes in existence. Increased whenever getnewvnode()
* allocates a new vnode, never decreased.
*/
Staticized.
1997-11-22 08:35:46 +00:00
static unsigned long numvnodes;
Add vlruvp() routine - implements LRU operation for vnode recycling. We calculate a trigger point that both guarentees we will find a sufficient number of vnodes to recycle and prevents us from recycling vnodes with lots of resident pages. This particular section of code is designed to recycle vnodes, not do unnecessary frees of cached VM pages.
2002-01-10 18:31:53 +00:00
Correct int/long type mismatch in the proper place this time. freevnodes and numvnodes are longs in the kernel. They should remain longs in systat, what really needs to change is that they should be using SYSCTL_LONG rather than SYSCTL_INT. I also changed wantfreevnodes to SYSCTL_LONG because I happened to notice it. I wish there was a way to find all of these automatically.. Pointed out by: bde
2000-12-02 20:08:33 +00:00
SYSCTL_LONG(_debug, OID_AUTO, numvnodes, CTLFLAG_RD, &numvnodes, 0, "");
Completed function declarations and/or added prototypes.
1995-12-02 18:58:56 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
* Conversion tables for conversion from vnode types to inode formats
* and back.
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
enum vtype iftovt_tab[16] = {
VNON, VFIFO, VCHR, VNON, VDIR, VNON, VBLK, VNON,
VREG, VNON, VLNK, VNON, VSOCK, VNON, VNON, VBAD,
};
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
int vttoif_tab[9] = {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
0, S_IFREG, S_IFDIR, S_IFBLK, S_IFCHR, S_IFLNK,
S_IFSOCK, S_IFIFO, S_IFMT,
};
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
/*
* List of vnodes that are ready for recycling.
*/
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
static TAILQ_HEAD(freelst, vnode) vnode_free_list;
Fix some vnode management problems, and better mgmt of vnode free list. Fix the UIO optimization code. Fix an assumption in vm_map_insert regarding allocation of swap pagers. Fix an spl problem in the collapse handling in vm_object_deallocate. When pages are freed from vnode objects, and the criteria for putting the associated vnode onto the free list is reached, either put the vnode onto the list, or put it onto an interrupt safe version of the list, for further transfer onto the actual free list. Some minor syntax changes changing pre-decs, pre-incs to post versions. Remove a bogus timeout (that I added for debugging) from vn_lock. PHK will likely still have problems with the vnode list management, and so do I, but it is better than it was.
1998-01-12 01:46:33 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
* Minimum number of free vnodes. If there are fewer than this free vnodes,
* getnewvnode() will return a newly allocated vnode.
*/
Reduce the target number of vnodes on the freelist from desiredvnodes (usually a couple of thousand) to 25. The measured impact on cache-hits doesn't justify spending memory this way: Target number of free vnodes versus namecache hit rate in % during a make world: 10 98.5316 200 98.5479 500 98.5546 1000 98.5709 3000 98.6006 4000 98.6126
1997-09-25 16:17:57 +00:00
static u_long wantfreevnodes = 25;
Correct int/long type mismatch in the proper place this time. freevnodes and numvnodes are longs in the kernel. They should remain longs in systat, what really needs to change is that they should be using SYSCTL_LONG rather than SYSCTL_INT. I also changed wantfreevnodes to SYSCTL_LONG because I happened to notice it. I wish there was a way to find all of these automatically.. Pointed out by: bde
2000-12-02 20:08:33 +00:00
SYSCTL_LONG(_debug, OID_AUTO, wantfreevnodes, CTLFLAG_RW, &wantfreevnodes, 0, "");
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/* Number of vnodes in the free list. */
Do not initialize static/global variables to 0. Use bss instead of taking up space in the data section.
2001-12-19 01:35:18 +00:00
static u_long freevnodes;
Correct int/long type mismatch in the proper place this time. freevnodes and numvnodes are longs in the kernel. They should remain longs in systat, what really needs to change is that they should be using SYSCTL_LONG rather than SYSCTL_INT. I also changed wantfreevnodes to SYSCTL_LONG because I happened to notice it. I wish there was a way to find all of these automatically.. Pointed out by: bde
2000-12-02 20:08:33 +00:00
SYSCTL_LONG(_debug, OID_AUTO, freevnodes, CTLFLAG_RD, &freevnodes, 0, "");
After extensive testing it has been determined that adding complexity to avoid removing higher level directory vnodes from the namecache has no perceivable effect and will be removed. This is especially true when vmiodirenable is turned on, which it is by default now. ( vmiodirenable makes a huge difference in directory caching ). The vfs.vmiodirenable and vfs.nameileafonly sysctls have been left in to allow further testing, but I expect to rip out vfs.nameileafonly soon too. I have also determined through testing that the real problem with numvnodes getting too large is due to the VM Page cache preventing the vnode from being reclaimed. The directory stuff made only a tiny dent relative to Poul's original code, enough so that some tests succeeded. But tests with several million small files show that the bigger problem is the VM Page cache. This will have to be addressed by a future commit. MFC after: 3 days
2001-10-01 04:33:35 +00:00
#if 0
Reclaim directory vnodes held in namecache if few free vnodes are available. Only directory vnodes holding no child directory vnodes held in v_cache_src are recycled, so that directory vnodes near the root of the filesystem hierarchy remain in namecache and directory vnodes are not reclaimed in cascade. The period of vnode reclaiming attempt and the number of vnodes attempted to reclaim can be tuned via sysctl(2). Suggested by: tegge Approved by: phk
2001-04-18 11:19:50 +00:00
/* Number of vnode allocation. */
Do not initialize static/global variables to 0. Use bss instead of taking up space in the data section.
2001-12-19 01:35:18 +00:00
static u_long vnodeallocs;
Reclaim directory vnodes held in namecache if few free vnodes are available. Only directory vnodes holding no child directory vnodes held in v_cache_src are recycled, so that directory vnodes near the root of the filesystem hierarchy remain in namecache and directory vnodes are not reclaimed in cascade. The period of vnode reclaiming attempt and the number of vnodes attempted to reclaim can be tuned via sysctl(2). Suggested by: tegge Approved by: phk
2001-04-18 11:19:50 +00:00
SYSCTL_LONG(_debug, OID_AUTO, vnodeallocs, CTLFLAG_RD, &vnodeallocs, 0, "");
/* Period of vnode recycle from namecache in vnode allocation times. */
static u_long vnoderecycleperiod = 1000;
SYSCTL_LONG(_debug, OID_AUTO, vnoderecycleperiod, CTLFLAG_RW, &vnoderecycleperiod, 0, "");
/* Minimum number of total vnodes required to invoke vnode recycle from namecache. */
static u_long vnoderecyclemintotalvn = 2000;
SYSCTL_LONG(_debug, OID_AUTO, vnoderecyclemintotalvn, CTLFLAG_RW, &vnoderecyclemintotalvn, 0, "");
/* Minimum number of free vnodes required to invoke vnode recycle from namecache. */
static u_long vnoderecycleminfreevn = 2000;
SYSCTL_LONG(_debug, OID_AUTO, vnoderecycleminfreevn, CTLFLAG_RW, &vnoderecycleminfreevn, 0, "");
/* Number of vnodes attempted to recycle at a time. */
static u_long vnoderecyclenumber = 3000;
SYSCTL_LONG(_debug, OID_AUTO, vnoderecyclenumber, CTLFLAG_RW, &vnoderecyclenumber, 0, "");
After extensive testing it has been determined that adding complexity to avoid removing higher level directory vnodes from the namecache has no perceivable effect and will be removed. This is especially true when vmiodirenable is turned on, which it is by default now. ( vmiodirenable makes a huge difference in directory caching ). The vfs.vmiodirenable and vfs.nameileafonly sysctls have been left in to allow further testing, but I expect to rip out vfs.nameileafonly soon too. I have also determined through testing that the real problem with numvnodes getting too large is due to the VM Page cache preventing the vnode from being reclaimed. The directory stuff made only a tiny dent relative to Poul's original code, enough so that some tests succeeded. But tests with several million small files show that the bigger problem is the VM Page cache. This will have to be addressed by a future commit. MFC after: 3 days
2001-10-01 04:33:35 +00:00
#endif
Clean up and improve the namecache. 1. We always keep one 16th of the vnodes on the freelist, so that the namecache doesn't get trashed. It used to be that it wasn't a problem, but the only vnodes getting released these days are directories and things which Clean up and improve the namecache. 1. We always keep one 16th of the vnodes on the freelist, so that the namecache doesn't get trashed. It used to be that it wasn't a problem, but the only vnodes getting released these days are directories and things which gets forced out of the VM/cache. The latter is not numerous enough to keep the pool of vnodes needed for the namecache sufficiently big. 2. Purge invalid entries in the namecache as soon as we notice them. This avoids a stale entry pushing out a valid entry on the LRU list. 3. Speed up the lookup in the namecache by avoid a special case branch. 4. Make the cache purge routines do the thing they're supposed to, and in a decently efficient manner. 5. Make the size of the namecache follow the number of vnodes, so that we can always point to all the vnodes we have in core. 6. Readability has gone way up. 7. Added a "options NCH_STATISTICS" feature that will gather more detailed statistics on the performance of the namecache. Reviewed by: davidg (cvs is dumping core on me :-( )
1995-03-09 20:27:04 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
* Various variables used for debugging the new implementation of
* reassignbuf().
* XXX these are probably of (very) limited utility now.
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
*/
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
static int reassignbufcalls;
SYSCTL_INT(_vfs, OID_AUTO, reassignbufcalls, CTLFLAG_RW, &reassignbufcalls, 0, "");
static int reassignbufloops;
SYSCTL_INT(_vfs, OID_AUTO, reassignbufloops, CTLFLAG_RW, &reassignbufloops, 0, "");
static int reassignbufsortgood;
SYSCTL_INT(_vfs, OID_AUTO, reassignbufsortgood, CTLFLAG_RW, &reassignbufsortgood, 0, "");
static int reassignbufsortbad;
SYSCTL_INT(_vfs, OID_AUTO, reassignbufsortbad, CTLFLAG_RW, &reassignbufsortbad, 0, "");
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/* Set to 0 for old insertion-sort based reassignbuf, 1 for modern method. */
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
static int reassignbufmethod = 1;
SYSCTL_INT(_vfs, OID_AUTO, reassignbufmethod, CTLFLAG_RW, &reassignbufmethod, 0, "");
Do not initialize static/global variables to 0. Use bss instead of taking up space in the data section.
2001-12-19 01:35:18 +00:00
static int nameileafonly;
After extensive testing it has been determined that adding complexity to avoid removing higher level directory vnodes from the namecache has no perceivable effect and will be removed. This is especially true when vmiodirenable is turned on, which it is by default now. ( vmiodirenable makes a huge difference in directory caching ). The vfs.vmiodirenable and vfs.nameileafonly sysctls have been left in to allow further testing, but I expect to rip out vfs.nameileafonly soon too. I have also determined through testing that the real problem with numvnodes getting too large is due to the VM Page cache preventing the vnode from being reclaimed. The directory stuff made only a tiny dent relative to Poul's original code, enough so that some tests succeeded. But tests with several million small files show that the bigger problem is the VM Page cache. This will have to be addressed by a future commit. MFC after: 3 days
2001-10-01 04:33:35 +00:00
SYSCTL_INT(_vfs, OID_AUTO, nameileafonly, CTLFLAG_RW, &nameileafonly, 0, "");
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
#ifdef ENABLE_VFS_IOOPT
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
/* See NOTES for a description of this setting. */
Do not initialize static/global variables to 0. Use bss instead of taking up space in the data section.
2001-12-19 01:35:18 +00:00
int vfs_ioopt;
Fix the decl of vfs_ioopt, allow LFS to compile again, fix a minor problem with the object cache removal.
1997-12-29 01:03:55 +00:00
SYSCTL_INT(_vfs, OID_AUTO, ioopt, CTLFLAG_RW, &vfs_ioopt, 0, "");
Disable the vfs.ioopt option for now, so that we don't get gratuitious bugreports. I might not be able to fix the problems before 3.0, due to other, more important things.
1998-03-14 19:50:36 +00:00
#endif
Fix the decl of vfs_ioopt, allow LFS to compile again, fix a minor problem with the object cache removal.
1997-12-29 01:03:55 +00:00
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
/* List of mounted filesystems. */
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
struct mntlist mountlist = TAILQ_HEAD_INITIALIZER(mountlist);
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/* For any iteration/modification of mountlist */
Convert lockmgr locks from using simple locks to using mutexes. Add lockdestroy() and appropriate invocations, which corresponds to lockinit() and must be called to clean up after a lockmgr lock is no longer needed.
2000-10-04 01:29:17 +00:00
struct mtx mountlist_mtx;
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/* For any iteration/modification of mnt_vnodelist */
Convert all simplelocks to mutexes and remove the simplelock implementations.
2001-01-24 12:35:55 +00:00
struct mtx mntvnode_mtx;
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
* Cache for the mount type id assigned to NFS. This is used for
* special checks in nfs/nfs_nqlease.c and vm/vnode_pager.c.
*/
Instantiate `nfs_mount_type' in a standard file so that it is present when nfs is an LKM. Declare it in a header file. Don't forget to use it in non-Lite2 code. Initialize it to -1 instead of to 0, since 0 will soon be the mount type number for the first vfs loaded. NetBSD uses strcmp() to avoid this ugly global.
1998-09-05 15:17:34 +00:00
int nfs_mount_type = -1;
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/* To keep more than one thread at a time from running vfs_getnewfsid */
Convert all simplelocks to mutexes and remove the simplelock implementations.
2001-01-24 12:35:55 +00:00
static struct mtx mntid_mtx;
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/* For any iteration/modification of vnode_free_list */
Convert all simplelocks to mutexes and remove the simplelock implementations.
2001-01-24 12:35:55 +00:00
static struct mtx vnode_free_list_mtx;
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
* For any iteration/modification of dev->si_hlist (linked through
* v_specnext)
*/
Convert all simplelocks to mutexes and remove the simplelock implementations.
2001-01-24 12:35:55 +00:00
static struct mtx spechash_mtx;
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/* Publicly exported FS */
struct nfs_public nfs_pub;
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/* Zone for allocation of new vnodes - used exclusively by getnewvnode() */
Remove references to vm_zone.h and switch over to the new uma API. Also, remove maxsockets. If you look carefully you'll notice that the old zone allocator never honored this anyway.
2002-03-20 04:09:59 +00:00
static uma_zone_t vnode_zone;
static uma_zone_t vnodepoll_zone;
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/* Set to 1 to print out reclaim of active vnodes */
Do not initialize static/global variables to 0. Use bss instead of taking up space in the data section.
2001-12-19 01:35:18 +00:00
int prtactive;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* The workitem queue.
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
*
* It is useful to delay writes of file data and filesystem metadata
* for tens of seconds so that quickly created and deleted files need
* not waste disk bandwidth being created and removed. To realize this,
* we append vnodes to a "workitem" queue. When running with a soft
* updates implementation, most pending metadata dependencies should
* not wait for more than a few seconds. Thus, mounted on block devices
* are delayed only about a half the time that file data is delayed.
* Similarly, directory updates are more critical, so are only delayed
* about a third the time that file data is delayed. Thus, there are
* SYNCER_MAXDELAY queues that are processed round-robin at a rate of
* one each second (driven off the filesystem syncer process). The
* syncer_delayno variable indicates the next queue that is to be processed.
* Items that need to be processed soon are placed in this queue:
*
* syncer_workitem_pending[syncer_delayno]
*
* A delay of fifteen seconds is done by placing the request fifteen
* entries later in the queue:
*
* syncer_workitem_pending[(syncer_delayno + 15) & syncer_mask]
*
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
*/
Do not initialize static/global variables to 0. Use bss instead of taking up space in the data section.
2001-12-19 01:35:18 +00:00
static int syncer_delayno;
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
static long syncer_mask;
LIST_HEAD(synclist, vnode);
static struct synclist *syncer_workitem_pending;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
#define SYNCER_MAXDELAY 32
Staticize.
1998-12-21 23:38:33 +00:00
static int syncer_maxdelay = SYNCER_MAXDELAY; /* maximum delay time */
syncdelay, filedelay, dirdelay, metadelay are ints, not time_t's, and can also be made static.
2001-10-27 19:58:56 +00:00
static int syncdelay = 30; /* max time to delay syncing data */
static int filedelay = 30; /* time to delay syncing files */
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
SYSCTL_INT(_kern, OID_AUTO, filedelay, CTLFLAG_RW, &filedelay, 0, "");
syncdelay, filedelay, dirdelay, metadelay are ints, not time_t's, and can also be made static.
2001-10-27 19:58:56 +00:00
static int dirdelay = 29; /* time to delay syncing directories */
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
SYSCTL_INT(_kern, OID_AUTO, dirdelay, CTLFLAG_RW, &dirdelay, 0, "");
syncdelay, filedelay, dirdelay, metadelay are ints, not time_t's, and can also be made static.
2001-10-27 19:58:56 +00:00
static int metadelay = 28; /* time to delay syncing metadata */
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
SYSCTL_INT(_kern, OID_AUTO, metadelay, CTLFLAG_RW, &metadelay, 0, "");
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
static int rushjob; /* number of slots to run ASAP */
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
static int stat_rush_requests; /* number of times I/O speeded up */
SYSCTL_INT(_debug, OID_AUTO, rush_requests, CTLFLAG_RW, &stat_rush_requests, 0, "");
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
* Number of vnodes we want to exist at any one time. This is mostly used
* to size hash tables in vnode-related code. It is normally not used in
* getnewvnode(), as wantfreevnodes is normally nonzero.)
*
* XXX desiredvnodes is historical cruft and should not exist.
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
int desiredvnodes;
Add sysctl descriptions to many SYSCTL_XXXs PR: kern/11197 Submitted by: Adrian Chadd <adrian@FreeBSD.org> Reviewed by: billf(spelling/style/minor nits) Looked at by: bde(style)
1999-05-03 23:57:32 +00:00
SYSCTL_INT(_kern, KERN_MAXVNODES, maxvnodes, CTLFLAG_RW,
&desiredvnodes, 0, "Maximum number of vnodes");
After extensive testing it has been determined that adding complexity to avoid removing higher level directory vnodes from the namecache has no perceivable effect and will be removed. This is especially true when vmiodirenable is turned on, which it is by default now. ( vmiodirenable makes a huge difference in directory caching ). The vfs.vmiodirenable and vfs.nameileafonly sysctls have been left in to allow further testing, but I expect to rip out vfs.nameileafonly soon too. I have also determined through testing that the real problem with numvnodes getting too large is due to the VM Page cache preventing the vnode from being reclaimed. The directory stuff made only a tiny dent relative to Poul's original code, enough so that some tests succeeded. But tests with several million small files show that the bigger problem is the VM Page cache. This will have to be addressed by a future commit. MFC after: 3 days
2001-10-01 04:33:35 +00:00
static int minvnodes;
fix minor bug in kern.minvnodes sysctl. Use OID_AUTO.
2001-10-16 23:08:09 +00:00
SYSCTL_INT(_kern, OID_AUTO, minvnodes, CTLFLAG_RW,
After extensive testing it has been determined that adding complexity to avoid removing higher level directory vnodes from the namecache has no perceivable effect and will be removed. This is especially true when vmiodirenable is turned on, which it is by default now. ( vmiodirenable makes a huge difference in directory caching ). The vfs.vmiodirenable and vfs.nameileafonly sysctls have been left in to allow further testing, but I expect to rip out vfs.nameileafonly soon too. I have also determined through testing that the real problem with numvnodes getting too large is due to the VM Page cache preventing the vnode from being reclaimed. The directory stuff made only a tiny dent relative to Poul's original code, enough so that some tests succeeded. But tests with several million small files show that the bigger problem is the VM Page cache. This will have to be addressed by a future commit. MFC after: 3 days
2001-10-01 04:33:35 +00:00
&minvnodes, 0, "Minimum number of vnodes");
Do not initialize static/global variables to 0. Use bss instead of taking up space in the data section.
2001-12-19 01:35:18 +00:00
static int vnlru_nowhere;
Use a different mechanism to get the vnlru process to wake up and notice the shutdown request at reboot/halt time. Disable the printf 'vnlru process getting nowhere, pausing...' and instead export the count to the debug.vnlru_nowhere sysctl.
2001-12-19 01:31:12 +00:00
SYSCTL_INT(_debug, OID_AUTO, vnlru_nowhere, CTLFLAG_RW, &vnlru_nowhere, 0,
"Number of times the vnlru process ran without success");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Make v_addpollinfo() visible and non-inline. Have callers only call it as needed. Add necessary call in ufs_kqfilter(). Test-case found by: Andrew Gallatin <gallatin@cs.duke.edu>
2002-02-18 16:18:02 +00:00
void
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
v_addpollinfo(struct vnode *vp)
{
Remove references to vm_zone.h and switch over to the new uma API. Also, remove maxsockets. If you look carefully you'll notice that the old zone allocator never honored this anyway.
2002-03-20 04:09:59 +00:00
vp->v_pollinfo = uma_zalloc(vnodepoll_zone, M_WAITOK);
Change callers of mtx_init() to pass in an appropriate lock type name. In most cases NULL is passed, but in some cases such as network driver locks (which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used. Tested on: i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
mtx_init(&vp->v_pollinfo->vpi_lock, "vnode pollinfo", NULL, MTX_DEF);
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Initialize the vnode management data structures.
*/
Untangle vfsinit() a bit. Use seperate sysinit functions rather than having a super-function calling bits all over the place.
2000-12-06 07:09:08 +00:00
static void
vntblinit(void *dummy __unused)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
desiredvnodes = maxproc + cnt.v_page_count / 4;
After extensive testing it has been determined that adding complexity to avoid removing higher level directory vnodes from the namecache has no perceivable effect and will be removed. This is especially true when vmiodirenable is turned on, which it is by default now. ( vmiodirenable makes a huge difference in directory caching ). The vfs.vmiodirenable and vfs.nameileafonly sysctls have been left in to allow further testing, but I expect to rip out vfs.nameileafonly soon too. I have also determined through testing that the real problem with numvnodes getting too large is due to the VM Page cache preventing the vnode from being reclaimed. The directory stuff made only a tiny dent relative to Poul's original code, enough so that some tests succeeded. But tests with several million small files show that the bigger problem is the VM Page cache. This will have to be addressed by a future commit. MFC after: 3 days
2001-10-01 04:33:35 +00:00
minvnodes = desiredvnodes / 4;
Change callers of mtx_init() to pass in an appropriate lock type name. In most cases NULL is passed, but in some cases such as network driver locks (which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used. Tested on: i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
mtx_init(&mountlist_mtx, "mountlist", NULL, MTX_DEF);
mtx_init(&mntvnode_mtx, "mntvnode", NULL, MTX_DEF);
mtx_init(&mntid_mtx, "mntid", NULL, MTX_DEF);
mtx_init(&spechash_mtx, "spechash", NULL, MTX_DEF);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
TAILQ_INIT(&vnode_free_list);
Change callers of mtx_init() to pass in an appropriate lock type name. In most cases NULL is passed, but in some cases such as network driver locks (which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used. Tested on: i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
mtx_init(&vnode_free_list_mtx, "vnode_free_list", NULL, MTX_DEF);
Remove references to vm_zone.h and switch over to the new uma API. Also, remove maxsockets. If you look carefully you'll notice that the old zone allocator never honored this anyway.
2002-03-20 04:09:59 +00:00
vnode_zone = uma_zcreate("VNODE", sizeof (struct vnode), NULL, NULL,
NULL, NULL, UMA_ALIGN_PTR, UMA_ZONE_NOFREE);
vnodepoll_zone = uma_zcreate("VNODEPOLL", sizeof (struct vpollinfo),
NULL, NULL, NULL, NULL, UMA_ALIGN_PTR, UMA_ZONE_NOFREE);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* Initialize the filesystem syncer.
*/
syncer_workitem_pending = hashinit(syncer_maxdelay, M_VNODE,
&syncer_mask);
syncer_maxdelay = syncer_mask + 1;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Untangle vfsinit() a bit. Use seperate sysinit functions rather than having a super-function calling bits all over the place.
2000-12-06 07:09:08 +00:00
SYSINIT(vfs, SI_SUB_VFS, SI_ORDER_FIRST, vntblinit, NULL)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* Mark a mount point as busy. Used to synchronize access and to delay
* unmounting. Interlock is not released on failure.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vfs_busy(mp, flags, interlkp, td)
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
struct mount *mp;
int flags;
Convert lockmgr locks from using simple locks to using mutexes. Add lockdestroy() and appropriate invocations, which corresponds to lockinit() and must be called to clean up after a lockmgr lock is no longer needed.
2000-10-04 01:29:17 +00:00
struct mtx *interlkp;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
int lkflags;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Reviewed by: various. Ever since I first say the way the mount flags were used I've hated the fact that modes, and events, internal and exported, and short-term and long term flags are all thrown together. Finally it's annoyed me enough.. This patch to the entire FreeBSD tree adds a second mount flag word to the mount struct. it is not exported to userspace. I have moved some of the non exported flags over to this word. this means that we now have 8 free bits in the mount flags. There are another two that might well move over, but which I'm not sure about. The only user visible change would have been in pstat -v, except that davidg has disabled it anyhow. I'd still like to move the state flags and the 'command' flags apart from each other.. e.g. MNT_FORCE really doesn't have the same semantics as MNT_RDONLY, but that's left for another day.
1997-11-12 05:42:33 +00:00
if (mp->mnt_kern_flag & MNTK_UNMOUNT) {
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (flags & LK_NOWAIT)
return (ENOENT);
Reviewed by: various. Ever since I first say the way the mount flags were used I've hated the fact that modes, and events, internal and exported, and short-term and long term flags are all thrown together. Finally it's annoyed me enough.. This patch to the entire FreeBSD tree adds a second mount flag word to the mount struct. it is not exported to userspace. I have moved some of the non exported flags over to this word. this means that we now have 8 free bits in the mount flags. There are another two that might well move over, but which I'm not sure about. The only user visible change would have been in pstat -v, except that davidg has disabled it anyhow. I'd still like to move the state flags and the 'command' flags apart from each other.. e.g. MNT_FORCE really doesn't have the same semantics as MNT_RDONLY, but that's left for another day.
1997-11-12 05:42:33 +00:00
mp->mnt_kern_flag |= MNTK_MWAIT;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
/*
* Since all busy locks are shared except the exclusive
* lock granted when unmounting, the only place that a
* wakeup needs to be done is at the release of the
* exclusive lock at the end of dounmount.
*/
Use msleep() instead of mtx_exit()/tsleep() so that we release the lock and go to sleep as an "atomic" operation.
2000-12-01 03:43:33 +00:00
msleep((caddr_t)mp, interlkp, PVFS, "vfs_busy", 0);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
return (ENOENT);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
lkflags = LK_SHARED | LK_NOPAUSE;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (interlkp)
lkflags |= LK_INTERLOCK;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if (lockmgr(&mp->mnt_lock, lkflags, interlkp, td))
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
panic("vfs_busy: unexpected lock failure");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (0);
}
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* Free a busy filesystem.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
void
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vfs_unbusy(mp, td)
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
struct mount *mp;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
lockmgr(&mp->mnt_lock, LK_RELEASE, NULL, td);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* Lookup a filesystem type, and if found allocate and initialize
* a mount structure for it.
*
* Devname is usually updated by mount(8) after booting.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
vfs_rootmountalloc(fstypename, devname, mpp)
char *fstypename;
char *devname;
struct mount **mpp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td = curthread; /* XXX */
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
struct vfsconf *vfsp;
struct mount *mp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
This commit fixes various 64bit portability problems required for FreeBSD/alpha. The most significant item is to change the command argument to ioctl functions from int to u_long. This change brings us inline with various other BSD versions. Driver writers may like to use (__FreeBSD_version == 300003) to detect this change. The prototype FreeBSD/alpha machdep will follow in a couple of days time.
1998-06-07 17:13:14 +00:00
if (fstypename == NULL)
return (ENODEV);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
for (vfsp = vfsconf; vfsp; vfsp = vfsp->vfc_next)
if (!strcmp(vfsp->vfc_name, fstypename))
break;
if (vfsp == NULL)
return (ENODEV);
Convert more malloc+bzero to malloc+M_ZERO. Submitted by: josh@zipperup.org Submitted by: Robert Drehmel <robd@gmx.net>
2000-12-08 21:51:06 +00:00
mp = malloc((u_long)sizeof(struct mount), M_MOUNT, M_WAITOK | M_ZERO);
This mega-commit is meant to fix numerous interrelated problems. There has been some bitrot and incorrect assumptions in the vfs_bio code. These problems have manifest themselves worse on NFS type filesystems, but can still affect local filesystems under certain circumstances. Most of the problems have involved mmap consistancy, and as a side-effect broke the vfs.ioopt code. This code might have been committed seperately, but almost everything is interrelated. 1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that are fully valid. 2) Rather than deactivating erroneously read initial (header) pages in kern_exec, we now free them. 3) Fix the rundown of non-VMIO buffers that are in an inconsistent (missing vp) state. 4) Fix the disassociation of pages from buffers in brelse. The previous code had rotted and was faulty in a couple of important circumstances. 5) Remove a gratuitious buffer wakeup in vfs_vmio_release. 6) Remove a crufty and currently unused cluster mechanism for VBLK files in vfs_bio_awrite. When the code is functional, I'll add back a cleaner version. 7) The page busy count wakeups assocated with the buffer cache usage were incorrectly cleaned up in a previous commit by me. Revert to the original, correct version, but with a cleaner implementation. 8) The cluster read code now tries to keep data associated with buffers more aggressively (without breaking the heuristics) when it is presumed that the read data (buffers) will be soon needed. 9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The delay loop waiting is not useful for filesystem locks, due to the length of the time intervals. 10) Correct and clean-up spec_getpages. 11) Implement a fully functional nfs_getpages, nfs_putpages. 12) Fix nfs_write so that modifications are coherent with the NFS data on the server disk (at least as well as NFS seems to allow.) 13) Properly support MS_INVALIDATE on NFS. 14) Properly pass down MS_INVALIDATE to lower levels of the VM code from vm_map_clean. 15) Better support the notion of pages being busy but valid, so that fewer in-transit waits occur. (use p->busy more for pageouts instead of PG_BUSY.) Since the page is fully valid, it is still usable for reads. 16) It is possible (in error) for cached pages to be busy. Make the page allocation code handle that case correctly. (It should probably be a printf or panic, but I want the system to handle coding errors robustly. I'll probably add a printf.) 17) Correct the design and usage of vm_page_sleep. It didn't handle consistancy problems very well, so make the design a little less lofty. After vm_page_sleep, if it ever blocked, it is still important to relookup the page (if the object generation count changed), and verify it's status (always.) 18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up. 19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush. 20) Fix vm_pager_put_pages and it's descendents to support an int flag instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
lockinit(&mp->mnt_lock, PVFS, "vfslock", 0, LK_NOPAUSE);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
(void)vfs_busy(mp, LK_NOWAIT, 0, td);
Change the vnode list under the mount point from a LIST to a TAILQ in preparation for an implementation of limiting code for kern.maxvnodes. MFC after: 3 days
2001-10-23 01:21:29 +00:00
TAILQ_INIT(&mp->mnt_nvnodelist);
Add mnt_reservedvnlist so we can MFC to 4.x, in order to make all mount structure changes now rather then piecemeal later on. mnt_nvnodelist currently holds all the vnodes under the mount point. This will eventually be split into a 'dirty' and 'clean' list. This way we only break kld's once rather then twice. nvnodelist will eventually turn into the dirty list and should remain compatible with the klds.
2001-11-04 18:55:42 +00:00
TAILQ_INIT(&mp->mnt_reservedvnlist);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
mp->mnt_vfc = vfsp;
mp->mnt_op = vfsp->vfc_vfsops;
mp->mnt_flag = MNT_RDONLY;
mp->mnt_vnodecovered = NULLVP;
vfsp->vfc_refcount++;
Remove v_maxio from struct vnode. Replace it with mnt_iosize_max in struct mount. Nits from: bde
1999-09-29 20:05:33 +00:00
mp->mnt_iosize_max = DFLTPHYS;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
mp->mnt_stat.f_type = vfsp->vfc_typenum;
mp->mnt_flag |= vfsp->vfc_flags & MNT_VISFLAGMASK;
strncpy(mp->mnt_stat.f_fstypename, vfsp->vfc_name, MFSNAMELEN);
mp->mnt_stat.f_mntonname[0] = '/';
mp->mnt_stat.f_mntonname[1] = 0;
(void) copystr(devname, mp->mnt_stat.f_mntfromname, MNAMELEN - 1, 0);
*mpp = mp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (0);
}
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* Find an appropriate filesystem to use for the root. If a filesystem
* has not been preselected, walk through the list of known filesystems
* trying those that have mountroot routines, and try them until one
* works or we have tried them all.
Implemented filesystem clean bit via: machdep.c: Changed printf's a little and call vfs_unmountall() if the sync was successful. cd9660_vfsops.c, ffs_vfsops.c, nfs_vfsops.c, lfs_vfsops.c: Allow dismount of root FS. It is now disallowed at a higher level. vfs_conf.c: Removed unused rootfs global. vfs_subr.c: Added new routines vfs_unmountall and vfs_unmountroot. Filesystems are now dismounted if the machine is properly rebooted. ffs_vfsops.c: Toggle clean bit at the appropriate places. Print warning if an unclean FS is mounted. ffs_vfsops.c, lfs_vfsops.c: Fix bug in selecting proper flags for VOP_CLOSE(). vfs_syscalls.c: Disallow dismounting root FS via umount syscall.
1994-08-20 16:03:26 +00:00
*/
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
#ifdef notdef /* XXX JH */
int
Fixed gratuitous ANSIisms.
1997-09-16 11:44:05 +00:00
lite2_vfs_mountroot()
Implemented filesystem clean bit via: machdep.c: Changed printf's a little and call vfs_unmountall() if the sync was successful. cd9660_vfsops.c, ffs_vfsops.c, nfs_vfsops.c, lfs_vfsops.c: Allow dismount of root FS. It is now disallowed at a higher level. vfs_conf.c: Removed unused rootfs global. vfs_subr.c: Added new routines vfs_unmountall and vfs_unmountroot. Filesystems are now dismounted if the machine is properly rebooted. ffs_vfsops.c: Toggle clean bit at the appropriate places. Print warning if an unclean FS is mounted. ffs_vfsops.c, lfs_vfsops.c: Fix bug in selecting proper flags for VOP_CLOSE(). vfs_syscalls.c: Disallow dismounting root FS via umount syscall.
1994-08-20 16:03:26 +00:00
{
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
struct vfsconf *vfsp;
Remove __P.
2002-03-19 21:25:46 +00:00
extern int (*lite2_mountroot)(void);
Implemented filesystem clean bit via: machdep.c: Changed printf's a little and call vfs_unmountall() if the sync was successful. cd9660_vfsops.c, ffs_vfsops.c, nfs_vfsops.c, lfs_vfsops.c: Allow dismount of root FS. It is now disallowed at a higher level. vfs_conf.c: Removed unused rootfs global. vfs_subr.c: Added new routines vfs_unmountall and vfs_unmountroot. Filesystems are now dismounted if the machine is properly rebooted. ffs_vfsops.c: Toggle clean bit at the appropriate places. Print warning if an unclean FS is mounted. ffs_vfsops.c, lfs_vfsops.c: Fix bug in selecting proper flags for VOP_CLOSE(). vfs_syscalls.c: Disallow dismounting root FS via umount syscall.
1994-08-20 16:03:26 +00:00
int error;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (lite2_mountroot != NULL)
return ((*lite2_mountroot)());
for (vfsp = vfsconf; vfsp; vfsp = vfsp->vfc_next) {
if (vfsp->vfc_mountroot == NULL)
Implemented filesystem clean bit via: machdep.c: Changed printf's a little and call vfs_unmountall() if the sync was successful. cd9660_vfsops.c, ffs_vfsops.c, nfs_vfsops.c, lfs_vfsops.c: Allow dismount of root FS. It is now disallowed at a higher level. vfs_conf.c: Removed unused rootfs global. vfs_subr.c: Added new routines vfs_unmountall and vfs_unmountroot. Filesystems are now dismounted if the machine is properly rebooted. ffs_vfsops.c: Toggle clean bit at the appropriate places. Print warning if an unclean FS is mounted. ffs_vfsops.c, lfs_vfsops.c: Fix bug in selecting proper flags for VOP_CLOSE(). vfs_syscalls.c: Disallow dismounting root FS via umount syscall.
1994-08-20 16:03:26 +00:00
continue;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if ((error = (*vfsp->vfc_mountroot)()) == 0)
return (0);
printf("%s_mountroot failed: %d\n", vfsp->vfc_name, error);
Implemented filesystem clean bit via: machdep.c: Changed printf's a little and call vfs_unmountall() if the sync was successful. cd9660_vfsops.c, ffs_vfsops.c, nfs_vfsops.c, lfs_vfsops.c: Allow dismount of root FS. It is now disallowed at a higher level. vfs_conf.c: Removed unused rootfs global. vfs_subr.c: Added new routines vfs_unmountall and vfs_unmountroot. Filesystems are now dismounted if the machine is properly rebooted. ffs_vfsops.c: Toggle clean bit at the appropriate places. Print warning if an unclean FS is mounted. ffs_vfsops.c, lfs_vfsops.c: Fix bug in selecting proper flags for VOP_CLOSE(). vfs_syscalls.c: Disallow dismounting root FS via umount syscall.
1994-08-20 16:03:26 +00:00
}
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
return (ENODEV);
Implemented filesystem clean bit via: machdep.c: Changed printf's a little and call vfs_unmountall() if the sync was successful. cd9660_vfsops.c, ffs_vfsops.c, nfs_vfsops.c, lfs_vfsops.c: Allow dismount of root FS. It is now disallowed at a higher level. vfs_conf.c: Removed unused rootfs global. vfs_subr.c: Added new routines vfs_unmountall and vfs_unmountroot. Filesystems are now dismounted if the machine is properly rebooted. ffs_vfsops.c: Toggle clean bit at the appropriate places. Print warning if an unclean FS is mounted. ffs_vfsops.c, lfs_vfsops.c: Fix bug in selecting proper flags for VOP_CLOSE(). vfs_syscalls.c: Disallow dismounting root FS via umount syscall.
1994-08-20 16:03:26 +00:00
}
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
#endif
Implemented filesystem clean bit via: machdep.c: Changed printf's a little and call vfs_unmountall() if the sync was successful. cd9660_vfsops.c, ffs_vfsops.c, nfs_vfsops.c, lfs_vfsops.c: Allow dismount of root FS. It is now disallowed at a higher level. vfs_conf.c: Removed unused rootfs global. vfs_subr.c: Added new routines vfs_unmountall and vfs_unmountroot. Filesystems are now dismounted if the machine is properly rebooted. ffs_vfsops.c: Toggle clean bit at the appropriate places. Print warning if an unclean FS is mounted. ffs_vfsops.c, lfs_vfsops.c: Fix bug in selecting proper flags for VOP_CLOSE(). vfs_syscalls.c: Disallow dismounting root FS via umount syscall.
1994-08-20 16:03:26 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Lookup a mount point by filesystem identifier.
*/
struct mount *
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
vfs_getvfs(fsid)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
fsid_t *fsid;
{
register struct mount *mp;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mountlist_mtx);
struct mountlist and struct mount.mnt_list have no business being a CIRCLEQ. Change them to TAILQ_HEAD and TAILQ_ENTRY respectively. This removes ugly mp != (void*)&mountlist comparisons. Requested by: phk Submitted by: Jake Burkholder jake@checker.org PR: 14967
1999-11-20 10:00:46 +00:00
TAILQ_FOREACH(mp, &mountlist, mnt_list) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (mp->mnt_stat.f_fsid.val[0] == fsid->val[0] &&
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
mp->mnt_stat.f_fsid.val[1] == fsid->val[1]) {
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mountlist_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (mp);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mountlist_mtx);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
return ((struct mount *) 0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
Don't try so hard to make the lower 16 bits of fsids unique. It tended to recycle full fsids after only 16 mount/unmount's. This is probably too often for exported fsids. Now we recycle the full fsids only after 2^16 mount/ umount's and only ensure uniqueness in the lower 16 bits if there have been <= 256 calls to vfs_getnewfsid() since the system started.
2000-03-14 14:19:49 +00:00
* Get a new unique fsid. Try to make its val[0] unique, since this value
* will be used to create fake device numbers for stat(). Also try (but
* not so hard) make its val[0] unique mod 2^16, since some emulators only
* support 16-bit device numbers. We end up with unique val[0]'s for the
* first 2^16 calls and unique val[0]'s mod 2^16 for the first 2^8 calls.
Fix BOOTP root FS mounts. Also cleanup vfs_getnewfsid() and collapse addaliasu() into addalias() (no operational change) and clarify comments relating to a trick that vclean() uses. The fix to BOOTP is yet another hack. Actually, rootfsid handling is already a major hack. The whole thing needs to be cleaned up. Reviewed by: David Greenman <dg@root.com>, Alan Cox <alc@cs.rice.edu>
1999-09-19 06:24:21 +00:00
*
Try harder to make the lower 16 bits of fsids unique. The vfs type number was packed very wastefully, giving perfect non-uniqeness in the lower 16 bits of fsids for filesystems with the same vfs type. This made linux_stat() return perfectly non-unique (broken) 16-bit st_dev's for nfs mount points, and effectively reduced mntid_base to 8 bits so that the vfs_getnewfsid() looped endlessly when there are already 256 mounted filesystems with the required vfs type. Approved by: jkh
2000-03-12 14:23:21 +00:00
* Keep in mind that several mounts may be running in parallel. Starting
Don't try so hard to make the lower 16 bits of fsids unique. It tended to recycle full fsids after only 16 mount/unmount's. This is probably too often for exported fsids. Now we recycle the full fsids only after 2^16 mount/ umount's and only ensure uniqueness in the lower 16 bits if there have been <= 256 calls to vfs_getnewfsid() since the system started.
2000-03-14 14:19:49 +00:00
* the search one past where the previous search terminated is both a
* micro-optimization and a defense against returning the same fsid to
* different mounts.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
void
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
vfs_getnewfsid(mp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct mount *mp;
{
Don't try so hard to make the lower 16 bits of fsids unique. It tended to recycle full fsids after only 16 mount/unmount's. This is probably too often for exported fsids. Now we recycle the full fsids only after 2^16 mount/ umount's and only ensure uniqueness in the lower 16 bits if there have been <= 256 calls to vfs_getnewfsid() since the system started.
2000-03-14 14:19:49 +00:00
static u_int16_t mntid_base;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
fsid_t tfsid;
Don't try so hard to make the lower 16 bits of fsids unique. It tended to recycle full fsids after only 16 mount/unmount's. This is probably too often for exported fsids. Now we recycle the full fsids only after 2^16 mount/ umount's and only ensure uniqueness in the lower 16 bits if there have been <= 256 calls to vfs_getnewfsid() since the system started.
2000-03-14 14:19:49 +00:00
int mtype;
Fix BOOTP root FS mounts. Also cleanup vfs_getnewfsid() and collapse addaliasu() into addalias() (no operational change) and clarify comments relating to a trick that vclean() uses. The fix to BOOTP is yet another hack. Actually, rootfsid handling is already a major hack. The whole thing needs to be cleaned up. Reviewed by: David Greenman <dg@root.com>, Alan Cox <alc@cs.rice.edu>
1999-09-19 06:24:21 +00:00
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mntid_mtx);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
mtype = mp->mnt_vfc->vfc_typenum;
Try harder to make the lower 16 bits of fsids unique. The vfs type number was packed very wastefully, giving perfect non-uniqeness in the lower 16 bits of fsids for filesystems with the same vfs type. This made linux_stat() return perfectly non-unique (broken) 16-bit st_dev's for nfs mount points, and effectively reduced mntid_base to 8 bits so that the vfs_getnewfsid() looped endlessly when there are already 256 mounted filesystems with the required vfs type. Approved by: jkh
2000-03-12 14:23:21 +00:00
tfsid.val[1] = mtype;
Fix support for more than 256 simultaneous mounts. Theoretical limit is 2^16 mounts per fs type. Reported by: Troy Arie Cobb <tcobb@staff.circle.net> via phk Reviewed by: bde
2000-07-07 14:01:08 +00:00
mtype = (mtype & 0xFF) << 24;
Don't try so hard to make the lower 16 bits of fsids unique. It tended to recycle full fsids after only 16 mount/unmount's. This is probably too often for exported fsids. Now we recycle the full fsids only after 2^16 mount/ umount's and only ensure uniqueness in the lower 16 bits if there have been <= 256 calls to vfs_getnewfsid() since the system started.
2000-03-14 14:19:49 +00:00
for (;;) {
Fix support for more than 256 simultaneous mounts. Theoretical limit is 2^16 mounts per fs type. Reported by: Troy Arie Cobb <tcobb@staff.circle.net> via phk Reviewed by: bde
2000-07-07 14:01:08 +00:00
tfsid.val[0] = makeudev(255,
mtype | ((mntid_base & 0xFF00) << 8) | (mntid_base & 0xFF));
mntid_base++;
Fix BOOTP root FS mounts. Also cleanup vfs_getnewfsid() and collapse addaliasu() into addalias() (no operational change) and clarify comments relating to a trick that vclean() uses. The fix to BOOTP is yet another hack. Actually, rootfsid handling is already a major hack. The whole thing needs to be cleaned up. Reviewed by: David Greenman <dg@root.com>, Alan Cox <alc@cs.rice.edu>
1999-09-19 06:24:21 +00:00
if (vfs_getvfs(&tfsid) == NULL)
break;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
mp->mnt_stat.f_fsid.val[0] = tfsid.val[0];
Fix BOOTP root FS mounts. Also cleanup vfs_getnewfsid() and collapse addaliasu() into addalias() (no operational change) and clarify comments relating to a trick that vclean() uses. The fix to BOOTP is yet another hack. Actually, rootfsid handling is already a major hack. The whole thing needs to be cleaned up. Reviewed by: David Greenman <dg@root.com>, Alan Cox <alc@cs.rice.edu>
1999-09-19 06:24:21 +00:00
mp->mnt_stat.f_fsid.val[1] = tfsid.val[1];
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mntid_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Support full-precision file timestamps. Until now, only the seconds have been maintained, and that is still the default. A new sysctl variable "vfs.timestamp_precision" can be used to enable higher levels of precision: 0 = seconds only; nanoseconds zeroed (default). 1 = seconds and nanoseconds, accurate within 1/HZ. 2 = seconds and nanoseconds, truncated to microseconds. >=3 = seconds and nanoseconds, maximum precision. Level 1 uses getnanotime(), which is fast but can be wrong by up to 1/HZ. Level 2 uses microtime(). It might be desirable for consistency with utimes() and friends, which take timeval structures rather than timespecs. Level 3 uses nanotime() for the higest precision. I benchmarked levels 0, 1, and 3 by copying a 550 MB tree with "cpio -pdu". There was almost negligible difference in the system times -- much less than 1%, and less than the variation among multiple runs at the same level. Bruce Evans dreamed up a torture test involving 1-byte reads with intervening fstat() calls, but the cpio test seems more realistic to me. This feature is currently implemented only for the UFS (FFS and MFS) filesystems. But I think it should be easy to support it in the others as well. An earlier version of this was reviewed by Bruce. He's not to blame for any breakage I've introduced since then. Reviewed by: bde (an earlier version of the code)
1999-08-22 00:15:16 +00:00
/*
* Knob to control the precision of file timestamps:
*
* 0 = seconds only; nanoseconds zeroed.
* 1 = seconds and nanoseconds, accurate within 1/HZ.
* 2 = seconds and nanoseconds, truncated to microseconds.
* >=3 = seconds and nanoseconds, maximum precision.
*/
enum { TSP_SEC, TSP_HZ, TSP_USEC, TSP_NSEC };
static int timestamp_precision = TSP_SEC;
SYSCTL_INT(_vfs, OID_AUTO, timestamp_precision, CTLFLAG_RW,
&timestamp_precision, 0, "");
/*
* Get a current timestamp.
*/
void
vfs_timestamp(tsp)
struct timespec *tsp;
{
struct timeval tv;
switch (timestamp_precision) {
case TSP_SEC:
tsp->tv_sec = time_second;
tsp->tv_nsec = 0;
break;
case TSP_HZ:
getnanotime(tsp);
break;
case TSP_USEC:
microtime(&tv);
TIMEVAL_TO_TIMESPEC(&tv, tsp);
break;
case TSP_NSEC:
default:
nanotime(tsp);
break;
}
}
As discussed in -arch, add the new nmount(2) system call and the new vfs_getopt()/vfs_copyopt() API. This is intended to be used later, when there will be filesystems implementing the VFS_NMOUNT operation. The mount(2) system call will disappear when all filesystems will be converted to the new API. Documentation will be committed in a while. Reviewed by: phk
2002-03-26 15:33:44 +00:00
/*
* Get a mount option by its name.
*
* Return 0 if the option was found.
* Return ENOENT if the option wasn't found.
* If len is a non-NULL pointer and *len
* a integer different from 0, then the size
* of the option will be compared with *len and
* if they doesn't match, EINVAL is returned.
* If len is non-NULL and *len == 0, it will
* be filled with the length of the option.
* Finally, if buf is non-NULL, it will be
* filled with the address of the option.
*/
int
vfs_getopt(opts, name, buf, len)
struct vfsoptlist *opts;
const char *name;
void **buf;
int *len;
{
struct vfsopt *opt;
int i;
i = 0;
opt = opts->opt;
while (i++ < opts->optcnt) {
if (strcmp(name, opt->name) == 0) {
if (len != NULL) {
if ((*len != 0) && (*len != opt->len))
return (EINVAL);
*len = opt->len;
}
if (buf != NULL)
*buf = opt->value;
return (0);
}
opt++;
}
return (ENOENT);
}
/*
* Find and copy a mount option.
* The size of the buffer has to be specified
* in len, if it is not big enough, EINVAL is
* returned. Returns ENOENT if the option is
* not found. Otherwise, the number of bytes
* actually copied are put in done if it's
* non-NULL and 0 is returned.
*/
int
vfs_copyopt(opts, name, dest, len, done)
struct vfsoptlist *opts;
const char *name;
void *dest;
int len, *done;
{
struct vfsopt *opt;
int i;
i = 0;
opt = opts->opt;
while (i++ < opts->optcnt) {
if (strcmp(name, opt->name) == 0) {
if (len < opt->len)
return (EINVAL);
bcopy(dest, opt->value, opt->len);
if (done != NULL)
*done = opt->len;
return (0);
}
opt++;
}
return (ENOENT);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Set vnode attributes to VNOVAL
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
vattr_null(vap)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
register struct vattr *vap;
{
vap->va_type = VNON;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
vap->va_size = VNOVAL;
vap->va_bytes = VNOVAL;
Initialise all the fields separately in vattr_null since on the alpha they are not all the same width.
1998-07-12 16:45:39 +00:00
vap->va_mode = VNOVAL;
vap->va_nlink = VNOVAL;
vap->va_uid = VNOVAL;
vap->va_gid = VNOVAL;
vap->va_fsid = VNOVAL;
vap->va_fileid = VNOVAL;
vap->va_blocksize = VNOVAL;
vap->va_rdev = VNOVAL;
vap->va_atime.tv_sec = VNOVAL;
vap->va_atime.tv_nsec = VNOVAL;
vap->va_mtime.tv_sec = VNOVAL;
vap->va_mtime.tv_nsec = VNOVAL;
vap->va_ctime.tv_sec = VNOVAL;
vap->va_ctime.tv_nsec = VNOVAL;
vap->va_flags = VNOVAL;
vap->va_gen = VNOVAL;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vap->va_vaflags = 0;
}
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
/*
* This routine is called when we have too many vnodes. It attempts
* to free <count> vnodes and will potentially free vnodes that still
* have VM backing store (VM backing store is typically the cause
* of a vnode blowout so we want to do this). Therefore, this operation
* is not considered cheap.
*
* A number of conditions may prevent a vnode from being reclaimed.
* the buffer cache may have references on the vnode, a directory
* vnode may still have references due to the namei cache representing
* underlying files, or the vnode may be in active use. It is not
* desireable to reuse such vnodes. These conditions may cause the
* number of vnodes to reach some minimum value regardless of what
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
* you set kern.maxvnodes to. Do not set kern.maxvnodes too low.
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
*/
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
static int
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
vlrureclaim(struct mount *mp, int count)
{
struct vnode *vp;
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
int done;
Add vlruvp() routine - implements LRU operation for vnode recycling. We calculate a trigger point that both guarentees we will find a sufficient number of vnodes to recycle and prevents us from recycling vnodes with lots of resident pages. This particular section of code is designed to recycle vnodes, not do unnecessary frees of cached VM pages.
2002-01-10 18:31:53 +00:00
int trigger;
int usevnodes;
/*
* Calculate the trigger point, don't allow user
* screwups to blow us up. This prevents us from
* recycling vnodes with lots of resident pages. We
* aren't trying to free memory, we are trying to
* free vnodes.
*/
usevnodes = desiredvnodes;
if (usevnodes <= 0)
usevnodes = 1;
trigger = cnt.v_page_count * 2 / usevnodes;
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
done = 0;
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
mtx_lock(&mntvnode_mtx);
while (count && (vp = TAILQ_FIRST(&mp->mnt_nvnodelist)) != NULL) {
TAILQ_REMOVE(&mp->mnt_nvnodelist, vp, v_nmntvnodes);
TAILQ_INSERT_TAIL(&mp->mnt_nvnodelist, vp, v_nmntvnodes);
if (vp->v_type != VNON &&
vp->v_type != VBAD &&
VMIGHTFREE(vp) && /* critical path opt */
Add vlruvp() routine - implements LRU operation for vnode recycling. We calculate a trigger point that both guarentees we will find a sufficient number of vnodes to recycle and prevents us from recycling vnodes with lots of resident pages. This particular section of code is designed to recycle vnodes, not do unnecessary frees of cached VM pages.
2002-01-10 18:31:53 +00:00
(vp->v_object == NULL || vp->v_object->resident_page_count < trigger) &&
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
mtx_trylock(&vp->v_interlock)
) {
mtx_unlock(&mntvnode_mtx);
if (VMIGHTFREE(vp)) {
vgonel(vp, curthread);
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
done++;
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
} else {
mtx_unlock(&vp->v_interlock);
}
mtx_lock(&mntvnode_mtx);
}
--count;
}
mtx_unlock(&mntvnode_mtx);
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
return done;
}
/*
* Attempt to recycle vnodes in a context that is always safe to block.
* Calling vlrurecycle() from the bowels of file system code has some
* interesting deadlock problems.
*/
static struct proc *vnlruproc;
static int vnlruproc_sig;
static void
vnlru_proc(void)
{
struct mount *mp, *nmp;
int s;
int done;
struct proc *p = vnlruproc;
Pre-KSE/M3 commit. this is a low-functionality change that changes the kernel to access the main thread of a process via the linked list of threads rather than assuming that it is embedded in the process. It IS still embeded there but remove all teh code that assumes that in preparation for the next commit which will actually move it out. Reviewed by: peter@freebsd.org, gallatin@cs.duke.edu, benno rice,
2002-02-07 20:58:47 +00:00
struct thread *td = FIRST_THREAD_IN_PROC(p); /* XXXKSE */
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
mtx_lock(&Giant);
EVENTHANDLER_REGISTER(shutdown_pre_sync, kproc_shutdown, p,
SHUTDOWN_PRI_FIRST);
s = splbio();
for (;;) {
kthread_suspend_check(p);
if (numvnodes - freevnodes <= desiredvnodes * 9 / 10) {
vnlruproc_sig = 0;
Use a different mechanism to get the vnlru process to wake up and notice the shutdown request at reboot/halt time. Disable the printf 'vnlru process getting nowhere, pausing...' and instead export the count to the debug.vnlru_nowhere sysctl.
2001-12-19 01:31:12 +00:00
tsleep(vnlruproc, PVFS, "vlruwt", 0);
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
continue;
}
done = 0;
mtx_lock(&mountlist_mtx);
for (mp = TAILQ_FIRST(&mountlist); mp != NULL; mp = nmp) {
if (vfs_busy(mp, LK_NOWAIT, &mountlist_mtx, td)) {
nmp = TAILQ_NEXT(mp, mnt_list);
continue;
}
done += vlrureclaim(mp, 10);
mtx_lock(&mountlist_mtx);
nmp = TAILQ_NEXT(mp, mnt_list);
vfs_unbusy(mp, td);
}
mtx_unlock(&mountlist_mtx);
if (done == 0) {
Use a different mechanism to get the vnlru process to wake up and notice the shutdown request at reboot/halt time. Disable the printf 'vnlru process getting nowhere, pausing...' and instead export the count to the debug.vnlru_nowhere sysctl.
2001-12-19 01:31:12 +00:00
#if 0
/* These messages are temporary debugging aids */
if (vnlru_nowhere < 5)
printf("vnlru process getting nowhere..\n");
else if (vnlru_nowhere == 5)
printf("vnlru process messages stopped.\n");
#endif
vnlru_nowhere++;
Fix type-o in previous commit (tsleep was using wrong rendezvous point)
2001-12-25 01:23:25 +00:00
tsleep(vnlruproc, PPAUSE, "vlrup", hz * 3);
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
}
}
splx(s);
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
}
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
static struct kproc_desc vnlru_kp = {
"vnlru",
vnlru_proc,
&vnlruproc
};
SYSINIT(vnlru, SI_SUB_KTHREAD_UPDATE, SI_ORDER_FIRST, kproc_start, &vnlru_kp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Routines having to do with the management of the vnode table.
*/
/*
* Return the next vnode from the free list.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
getnewvnode(tag, mp, vops, vpp)
enum vtagtype tag;
struct mount *mp;
Introduced a type `vop_t' for vnode operation functions and used it 1138 times (:-() in casts and a few more times in declarations. This change is null for the i386. The type has to be `typedef int vop_t(void *)' and not `typedef int vop_t()' because `gcc -Wstrict-prototypes' warns about the latter. Since vnode op functions are called with args of different (struct pointer) types, neither of these function types is any use for type checking of the arg, so it would be preferable not to use the complete function type, especially since using the complete type requires adding 1138 casts to avoid compiler warnings and another 40+ casts to reverse the function pointer conversions before calling the functions.
1995-11-09 08:17:23 +00:00
vop_t **vops;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct vnode **vpp;
{
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
int s;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td = curthread; /* XXX */
Simplify and rationalise the management of the vnode free list (preparing the code to add snapshots).
2000-07-04 04:32:40 +00:00
struct vnode *vp = NULL;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct mount *vnmp;
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
vm_object_t object;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
s = splbio();
Clean up and improve the namecache. 1. We always keep one 16th of the vnodes on the freelist, so that the namecache doesn't get trashed. It used to be that it wasn't a problem, but the only vnodes getting released these days are directories and things which Clean up and improve the namecache. 1. We always keep one 16th of the vnodes on the freelist, so that the namecache doesn't get trashed. It used to be that it wasn't a problem, but the only vnodes getting released these days are directories and things which gets forced out of the VM/cache. The latter is not numerous enough to keep the pool of vnodes needed for the namecache sufficiently big. 2. Purge invalid entries in the namecache as soon as we notice them. This avoids a stale entry pushing out a valid entry on the LRU list. 3. Speed up the lookup in the namecache by avoid a special case branch. 4. Make the cache purge routines do the thing they're supposed to, and in a decently efficient manner. 5. Make the size of the namecache follow the number of vnodes, so that we can always point to all the vnodes we have in core. 6. Readability has gone way up. 7. Added a "options NCH_STATISTICS" feature that will gather more detailed statistics on the performance of the namecache. Reviewed by: davidg (cvs is dumping core on me :-( )
1995-03-09 20:27:04 +00:00
/*
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
* Try to reuse vnodes if we hit the max. This situation only
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
* occurs in certain large-memory (2G+) situations. We cannot
* attempt to directly reclaim vnodes due to nasty recursion
* problems.
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
*/
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
if (vnlruproc_sig == 0 && numvnodes - freevnodes > desiredvnodes) {
vnlruproc_sig = 1; /* avoid unnecessary wakeups */
Use a different mechanism to get the vnlru process to wake up and notice the shutdown request at reboot/halt time. Disable the printf 'vnlru process getting nowhere, pausing...' and instead export the count to the debug.vnlru_nowhere sysctl.
2001-12-19 01:31:12 +00:00
wakeup(vnlruproc);
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
}
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
/*
* Attempt to reuse a vnode already on the free list, allocating
* a new vnode if we can't find one or if we have not reached a
* good minimum for good LRU performance.
Clean up and improve the namecache. 1. We always keep one 16th of the vnodes on the freelist, so that the namecache doesn't get trashed. It used to be that it wasn't a problem, but the only vnodes getting released these days are directories and things which Clean up and improve the namecache. 1. We always keep one 16th of the vnodes on the freelist, so that the namecache doesn't get trashed. It used to be that it wasn't a problem, but the only vnodes getting released these days are directories and things which gets forced out of the VM/cache. The latter is not numerous enough to keep the pool of vnodes needed for the namecache sufficiently big. 2. Purge invalid entries in the namecache as soon as we notice them. This avoids a stale entry pushing out a valid entry on the LRU list. 3. Speed up the lookup in the namecache by avoid a special case branch. 4. Make the cache purge routines do the thing they're supposed to, and in a decently efficient manner. 5. Make the size of the namecache follow the number of vnodes, so that we can always point to all the vnodes we have in core. 6. Readability has gone way up. 7. Added a "options NCH_STATISTICS" feature that will gather more detailed statistics on the performance of the namecache. Reviewed by: davidg (cvs is dumping core on me :-( )
1995-03-09 20:27:04 +00:00
*/
1. Add a {pointer, v_id} pair to the vnode to store the reference to the ".." vnode. This is cheaper storagewise than keeping it in the namecache, and it makes more sense since it's a 1:1 mapping. 2. Also handle the case of "." more intelligently rather than stuff the namecache with pointless entries. 3. Add two lists to the vnode and hang namecache entries which go from or to this vnode. When cleaning a vnode, delete all namecache entries it invalidates. 4. Never reuse namecache enties, malloc new ones when we need it, free old ones when they die. No longer a hard limit on how many we can have. 5. Remove the upper limit on namelength of namecache entries. 6. Make a global list for negative namecache entries, limit their number to a sysctl'able (debug.ncnegfactor) fraction of the total namecache. Currently the default fraction is 1/16th. (Suggestions for better default wanted!) 7. Assign v_id correctly in the face of 32bit rollover. 8. Remove the LRU list for namecache entries, not needed. Remove the #ifdef NCH_STATISTICS stuff, it's not needed either. 9. Use the vnode freelist as a true LRU list, also for namecache accesses. 10. Reuse vnodes more aggresively but also more selectively, if we can't reuse, malloc a new one. There is no longer a hard limit on their number, they grow to the point where we don't reuse potentially usable vnodes. A vnode will not get recycled if still has pages in core or if it is the source of namecache entries (Yes, this does indeed work :-) "." and ".." are not namecache entries any longer...) 11. Do not overload the v_id field in namecache entries with whiteout information, use a char sized flags field instead, so we can get rid of the vpid and v_id fields from the namecache struct. Since we're linked to the vnodes and purged when they're cleaned, we don't have to check the v_id any more. 12. NFS knew about the limitation on name length in the namecache, it shouldn't and doesn't now. Bugs: The namecache statistics no longer includes the hits for ".." and "." hits. Performance impact: Generally in the +/- 0.5% for "normal" workstations, but I hope this will allow the system to be selftuning over a bigger range of "special" applications. The case where RAM is available but unused for cache because we don't have any vnodes should be gone. Future work: Straighten out the namecache statistics. "desiredvnodes" is still used to (bogusly ?) size hash tables in the filesystems. I have still to find a way to safely free unused vnodes back so their number can shrink when not needed. There is a few uses of the v_id field left in the filesystems, scheduled for demolition at a later time. Maybe a one slot cache for unused namecache entries should be implemented to decrease the malloc/free frequency.
1997-05-04 09:17:38 +00:00
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vnode_free_list_mtx);
Fix some vnode management problems, and better mgmt of vnode free list. Fix the UIO optimization code. Fix an assumption in vm_map_insert regarding allocation of swap pagers. Fix an spl problem in the collapse handling in vm_object_deallocate. When pages are freed from vnode objects, and the criteria for putting the associated vnode onto the free list is reached, either put the vnode onto the list, or put it onto an interrupt safe version of the list, for further transfer onto the actual free list. Some minor syntax changes changing pre-decs, pre-incs to post versions. Remove a bogus timeout (that I added for debugging) from vn_lock. PHK will likely still have problems with the vnode list management, and so do I, but it is better than it was.
1998-01-12 01:46:33 +00:00
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
if (freevnodes >= wantfreevnodes && numvnodes >= minvnodes) {
int count;
After extensive testing it has been determined that adding complexity to avoid removing higher level directory vnodes from the namecache has no perceivable effect and will be removed. This is especially true when vmiodirenable is turned on, which it is by default now. ( vmiodirenable makes a huge difference in directory caching ). The vfs.vmiodirenable and vfs.nameileafonly sysctls have been left in to allow further testing, but I expect to rip out vfs.nameileafonly soon too. I have also determined through testing that the real problem with numvnodes getting too large is due to the VM Page cache preventing the vnode from being reclaimed. The directory stuff made only a tiny dent relative to Poul's original code, enough so that some tests succeeded. But tests with several million small files show that the bigger problem is the VM Page cache. This will have to be addressed by a future commit. MFC after: 3 days
2001-10-01 04:33:35 +00:00
for (count = 0; count < freevnodes; count++) {
vp = TAILQ_FIRST(&vnode_free_list);
if (vp == NULL || vp->v_usecount)
panic("getnewvnode: free vnode isn't");
TAILQ_REMOVE(&vnode_free_list, vp, v_freelist);
/*
* Don't recycle if we still have cached pages or if
* we cannot get the interlock.
*/
if ((VOP_GETVOBJECT(vp, &object) == 0 &&
(object->resident_page_count ||
object->ref_count)) ||
!mtx_trylock(&vp->v_interlock)) {
TAILQ_INSERT_TAIL(&vnode_free_list, vp,
v_freelist);
vp = NULL;
continue;
}
if (LIST_FIRST(&vp->v_cache_src)) {
/*
* note: nameileafonly sysctl is temporary,
* for debugging only, and will eventually be
* removed.
*/
if (nameileafonly > 0) {
/*
* Do not reuse namei-cached directory
* vnodes that have cached
* subdirectories.
*/
if (cache_leaf_test(vp) < 0) {
mtx_unlock(&vp->v_interlock);
Add missing TAILQ_INSERT_TAIL's which somehow didn't get comitted with the recent vnode cleanup.
2001-10-25 23:13:56 +00:00
TAILQ_INSERT_TAIL(&vnode_free_list, vp, v_freelist);
After extensive testing it has been determined that adding complexity to avoid removing higher level directory vnodes from the namecache has no perceivable effect and will be removed. This is especially true when vmiodirenable is turned on, which it is by default now. ( vmiodirenable makes a huge difference in directory caching ). The vfs.vmiodirenable and vfs.nameileafonly sysctls have been left in to allow further testing, but I expect to rip out vfs.nameileafonly soon too. I have also determined through testing that the real problem with numvnodes getting too large is due to the VM Page cache preventing the vnode from being reclaimed. The directory stuff made only a tiny dent relative to Poul's original code, enough so that some tests succeeded. But tests with several million small files show that the bigger problem is the VM Page cache. This will have to be addressed by a future commit. MFC after: 3 days
2001-10-01 04:33:35 +00:00
vp = NULL;
continue;
}
} else if (nameileafonly < 0 ||
vmiodirenable == 0) {
/*
* Do not reuse namei-cached directory
* vnodes if nameileafonly is -1 or
* if VMIO backing for directories is
* turned off (otherwise we reuse them
* too quickly).
*/
mtx_unlock(&vp->v_interlock);
Add missing TAILQ_INSERT_TAIL's which somehow didn't get comitted with the recent vnode cleanup.
2001-10-25 23:13:56 +00:00
TAILQ_INSERT_TAIL(&vnode_free_list, vp, v_freelist);
After extensive testing it has been determined that adding complexity to avoid removing higher level directory vnodes from the namecache has no perceivable effect and will be removed. This is especially true when vmiodirenable is turned on, which it is by default now. ( vmiodirenable makes a huge difference in directory caching ). The vfs.vmiodirenable and vfs.nameileafonly sysctls have been left in to allow further testing, but I expect to rip out vfs.nameileafonly soon too. I have also determined through testing that the real problem with numvnodes getting too large is due to the VM Page cache preventing the vnode from being reclaimed. The directory stuff made only a tiny dent relative to Poul's original code, enough so that some tests succeeded. But tests with several million small files show that the bigger problem is the VM Page cache. This will have to be addressed by a future commit. MFC after: 3 days
2001-10-01 04:33:35 +00:00
vp = NULL;
continue;
}
}
/*
* Skip over it if its filesystem is being suspended.
*/
if (vn_start_write(vp, &vnmp, V_NOWAIT) == 0)
break;
mtx_unlock(&vp->v_interlock);
Simplify and rationalise the management of the vnode free list (preparing the code to add snapshots).
2000-07-04 04:32:40 +00:00
TAILQ_INSERT_TAIL(&vnode_free_list, vp, v_freelist);
vp = NULL;
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
}
1. Add a {pointer, v_id} pair to the vnode to store the reference to the ".." vnode. This is cheaper storagewise than keeping it in the namecache, and it makes more sense since it's a 1:1 mapping. 2. Also handle the case of "." more intelligently rather than stuff the namecache with pointless entries. 3. Add two lists to the vnode and hang namecache entries which go from or to this vnode. When cleaning a vnode, delete all namecache entries it invalidates. 4. Never reuse namecache enties, malloc new ones when we need it, free old ones when they die. No longer a hard limit on how many we can have. 5. Remove the upper limit on namelength of namecache entries. 6. Make a global list for negative namecache entries, limit their number to a sysctl'able (debug.ncnegfactor) fraction of the total namecache. Currently the default fraction is 1/16th. (Suggestions for better default wanted!) 7. Assign v_id correctly in the face of 32bit rollover. 8. Remove the LRU list for namecache entries, not needed. Remove the #ifdef NCH_STATISTICS stuff, it's not needed either. 9. Use the vnode freelist as a true LRU list, also for namecache accesses. 10. Reuse vnodes more aggresively but also more selectively, if we can't reuse, malloc a new one. There is no longer a hard limit on their number, they grow to the point where we don't reuse potentially usable vnodes. A vnode will not get recycled if still has pages in core or if it is the source of namecache entries (Yes, this does indeed work :-) "." and ".." are not namecache entries any longer...) 11. Do not overload the v_id field in namecache entries with whiteout information, use a char sized flags field instead, so we can get rid of the vpid and v_id fields from the namecache struct. Since we're linked to the vnodes and purged when they're cleaned, we don't have to check the v_id any more. 12. NFS knew about the limitation on name length in the namecache, it shouldn't and doesn't now. Bugs: The namecache statistics no longer includes the hits for ".." and "." hits. Performance impact: Generally in the +/- 0.5% for "normal" workstations, but I hope this will allow the system to be selftuning over a bigger range of "special" applications. The case where RAM is available but unused for cache because we don't have any vnodes should be gone. Future work: Straighten out the namecache statistics. "desiredvnodes" is still used to (bogusly ?) size hash tables in the filesystems. I have still to find a way to safely free unused vnodes back so their number can shrink when not needed. There is a few uses of the v_id field left in the filesystems, scheduled for demolition at a later time. Maybe a one slot cache for unused namecache entries should be implemented to decrease the malloc/free frequency.
1997-05-04 09:17:38 +00:00
}
if (vp) {
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
vp->v_flag |= VDOOMED;
Clear the VFREE flag when the vnode is removed from the free list in getnewvnode(). Otherwise routines called from VOP_INACTIVE() might attempt to remove the vnode from a free list the vnode isn't on, causing corruption. PR: 18012
2000-11-02 21:42:54 +00:00
vp->v_flag &= ~VFREE;
Clean up and improve the namecache. 1. We always keep one 16th of the vnodes on the freelist, so that the namecache doesn't get trashed. It used to be that it wasn't a problem, but the only vnodes getting released these days are directories and things which Clean up and improve the namecache. 1. We always keep one 16th of the vnodes on the freelist, so that the namecache doesn't get trashed. It used to be that it wasn't a problem, but the only vnodes getting released these days are directories and things which gets forced out of the VM/cache. The latter is not numerous enough to keep the pool of vnodes needed for the namecache sufficiently big. 2. Purge invalid entries in the namecache as soon as we notice them. This avoids a stale entry pushing out a valid entry on the LRU list. 3. Speed up the lookup in the namecache by avoid a special case branch. 4. Make the cache purge routines do the thing they're supposed to, and in a decently efficient manner. 5. Make the size of the namecache follow the number of vnodes, so that we can always point to all the vnodes we have in core. 6. Readability has gone way up. 7. Added a "options NCH_STATISTICS" feature that will gather more detailed statistics on the performance of the namecache. Reviewed by: davidg (cvs is dumping core on me :-( )
1995-03-09 20:27:04 +00:00
freevnodes--;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vnode_free_list_mtx);
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
cache_purge(vp);
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
if (vp->v_type != VBAD) {
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vgonel(vp, td);
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
} else {
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vp->v_interlock);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
vn_finished_write(vnmp);
Eliminated many redundant vm_map_lookup operations for vm_mmap. Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish overhead for merged cache. Efficiency improvement for vfs_cluster. It used to do alot of redundant calls to cluster_rbuild. Correct the ordering for vrele of .text and release of credentials. Use the selective tlb update for 486/586/P6. Numerous fixes to the size of objects allocated for files. Additionally, fixes in the various pagers. Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs. Fixes in the swap pager for exhausted resources. The pageout code will not as readily thrash. Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE), thereby improving efficiency of several routines. Eliminate even more unnecessary vm_page_protect operations. Significantly speed up process forks. Make vm_object_page_clean more efficient, thereby eliminating the pause that happens every 30seconds. Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the case of filesystems mounted async. Fix a panic with busy pages when write clustering is done for non-VMIO buffers.
1996-01-19 04:00:31 +00:00
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
#ifdef INVARIANTS
All of this is cosmetic. prototypes, #includes, printfs and so on. Makes GCC a lot more silent.
1994-10-02 17:35:40 +00:00
{
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
int s;
if (vp->v_data)
panic("cleaned vnode isn't");
s = splbio();
if (vp->v_numoutput)
panic("Clean vnode has pending I/O's");
splx(s);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (vp->v_writecount != 0)
panic("Non-zero write count");
All of this is cosmetic. prototypes, #includes, printfs and so on. Makes GCC a lot more silent.
1994-10-02 17:35:40 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#endif
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
if (vp->v_pollinfo) {
mtx_destroy(&vp->v_pollinfo->vpi_lock);
Remove references to vm_zone.h and switch over to the new uma API. Also, remove maxsockets. If you look carefully you'll notice that the old zone allocator never honored this anyway.
2002-03-20 04:09:59 +00:00
uma_zfree(vnodepoll_zone, vp->v_pollinfo);
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
}
vp->v_pollinfo = NULL;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vp->v_flag = 0;
vp->v_lastw = 0;
vp->v_lasta = 0;
vp->v_cstart = 0;
vp->v_clen = 0;
vp->v_socket = 0;
1. Add a {pointer, v_id} pair to the vnode to store the reference to the ".." vnode. This is cheaper storagewise than keeping it in the namecache, and it makes more sense since it's a 1:1 mapping. 2. Also handle the case of "." more intelligently rather than stuff the namecache with pointless entries. 3. Add two lists to the vnode and hang namecache entries which go from or to this vnode. When cleaning a vnode, delete all namecache entries it invalidates. 4. Never reuse namecache enties, malloc new ones when we need it, free old ones when they die. No longer a hard limit on how many we can have. 5. Remove the upper limit on namelength of namecache entries. 6. Make a global list for negative namecache entries, limit their number to a sysctl'able (debug.ncnegfactor) fraction of the total namecache. Currently the default fraction is 1/16th. (Suggestions for better default wanted!) 7. Assign v_id correctly in the face of 32bit rollover. 8. Remove the LRU list for namecache entries, not needed. Remove the #ifdef NCH_STATISTICS stuff, it's not needed either. 9. Use the vnode freelist as a true LRU list, also for namecache accesses. 10. Reuse vnodes more aggresively but also more selectively, if we can't reuse, malloc a new one. There is no longer a hard limit on their number, they grow to the point where we don't reuse potentially usable vnodes. A vnode will not get recycled if still has pages in core or if it is the source of namecache entries (Yes, this does indeed work :-) "." and ".." are not namecache entries any longer...) 11. Do not overload the v_id field in namecache entries with whiteout information, use a char sized flags field instead, so we can get rid of the vpid and v_id fields from the namecache struct. Since we're linked to the vnodes and purged when they're cleaned, we don't have to check the v_id any more. 12. NFS knew about the limitation on name length in the namecache, it shouldn't and doesn't now. Bugs: The namecache statistics no longer includes the hits for ".." and "." hits. Performance impact: Generally in the +/- 0.5% for "normal" workstations, but I hope this will allow the system to be selftuning over a bigger range of "special" applications. The case where RAM is available but unused for cache because we don't have any vnodes should be gone. Future work: Straighten out the namecache statistics. "desiredvnodes" is still used to (bogusly ?) size hash tables in the filesystems. I have still to find a way to safely free unused vnodes back so their number can shrink when not needed. There is a few uses of the v_id field left in the filesystems, scheduled for demolition at a later time. Maybe a one slot cache for unused namecache entries should be implemented to decrease the malloc/free frequency.
1997-05-04 09:17:38 +00:00
} else {
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vnode_free_list_mtx);
Remove references to vm_zone.h and switch over to the new uma API. Also, remove maxsockets. If you look carefully you'll notice that the old zone allocator never honored this anyway.
2002-03-20 04:09:59 +00:00
vp = (struct vnode *) uma_zalloc(vnode_zone, M_WAITOK);
1. Add a {pointer, v_id} pair to the vnode to store the reference to the ".." vnode. This is cheaper storagewise than keeping it in the namecache, and it makes more sense since it's a 1:1 mapping. 2. Also handle the case of "." more intelligently rather than stuff the namecache with pointless entries. 3. Add two lists to the vnode and hang namecache entries which go from or to this vnode. When cleaning a vnode, delete all namecache entries it invalidates. 4. Never reuse namecache enties, malloc new ones when we need it, free old ones when they die. No longer a hard limit on how many we can have. 5. Remove the upper limit on namelength of namecache entries. 6. Make a global list for negative namecache entries, limit their number to a sysctl'able (debug.ncnegfactor) fraction of the total namecache. Currently the default fraction is 1/16th. (Suggestions for better default wanted!) 7. Assign v_id correctly in the face of 32bit rollover. 8. Remove the LRU list for namecache entries, not needed. Remove the #ifdef NCH_STATISTICS stuff, it's not needed either. 9. Use the vnode freelist as a true LRU list, also for namecache accesses. 10. Reuse vnodes more aggresively but also more selectively, if we can't reuse, malloc a new one. There is no longer a hard limit on their number, they grow to the point where we don't reuse potentially usable vnodes. A vnode will not get recycled if still has pages in core or if it is the source of namecache entries (Yes, this does indeed work :-) "." and ".." are not namecache entries any longer...) 11. Do not overload the v_id field in namecache entries with whiteout information, use a char sized flags field instead, so we can get rid of the vpid and v_id fields from the namecache struct. Since we're linked to the vnodes and purged when they're cleaned, we don't have to check the v_id any more. 12. NFS knew about the limitation on name length in the namecache, it shouldn't and doesn't now. Bugs: The namecache statistics no longer includes the hits for ".." and "." hits. Performance impact: Generally in the +/- 0.5% for "normal" workstations, but I hope this will allow the system to be selftuning over a bigger range of "special" applications. The case where RAM is available but unused for cache because we don't have any vnodes should be gone. Future work: Straighten out the namecache statistics. "desiredvnodes" is still used to (bogusly ?) size hash tables in the filesystems. I have still to find a way to safely free unused vnodes back so their number can shrink when not needed. There is a few uses of the v_id field left in the filesystems, scheduled for demolition at a later time. Maybe a one slot cache for unused namecache entries should be implemented to decrease the malloc/free frequency.
1997-05-04 09:17:38 +00:00
bzero((char *) vp, sizeof *vp);
Change callers of mtx_init() to pass in an appropriate lock type name. In most cases NULL is passed, but in some cases such as network driver locks (which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used. Tested on: i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
mtx_init(&vp->v_interlock, "vnode interlock", NULL, MTX_DEF);
1. Add a {pointer, v_id} pair to the vnode to store the reference to the ".." vnode. This is cheaper storagewise than keeping it in the namecache, and it makes more sense since it's a 1:1 mapping. 2. Also handle the case of "." more intelligently rather than stuff the namecache with pointless entries. 3. Add two lists to the vnode and hang namecache entries which go from or to this vnode. When cleaning a vnode, delete all namecache entries it invalidates. 4. Never reuse namecache enties, malloc new ones when we need it, free old ones when they die. No longer a hard limit on how many we can have. 5. Remove the upper limit on namelength of namecache entries. 6. Make a global list for negative namecache entries, limit their number to a sysctl'able (debug.ncnegfactor) fraction of the total namecache. Currently the default fraction is 1/16th. (Suggestions for better default wanted!) 7. Assign v_id correctly in the face of 32bit rollover. 8. Remove the LRU list for namecache entries, not needed. Remove the #ifdef NCH_STATISTICS stuff, it's not needed either. 9. Use the vnode freelist as a true LRU list, also for namecache accesses. 10. Reuse vnodes more aggresively but also more selectively, if we can't reuse, malloc a new one. There is no longer a hard limit on their number, they grow to the point where we don't reuse potentially usable vnodes. A vnode will not get recycled if still has pages in core or if it is the source of namecache entries (Yes, this does indeed work :-) "." and ".." are not namecache entries any longer...) 11. Do not overload the v_id field in namecache entries with whiteout information, use a char sized flags field instead, so we can get rid of the vpid and v_id fields from the namecache struct. Since we're linked to the vnodes and purged when they're cleaned, we don't have to check the v_id any more. 12. NFS knew about the limitation on name length in the namecache, it shouldn't and doesn't now. Bugs: The namecache statistics no longer includes the hits for ".." and "." hits. Performance impact: Generally in the +/- 0.5% for "normal" workstations, but I hope this will allow the system to be selftuning over a bigger range of "special" applications. The case where RAM is available but unused for cache because we don't have any vnodes should be gone. Future work: Straighten out the namecache statistics. "desiredvnodes" is still used to (bogusly ?) size hash tables in the filesystems. I have still to find a way to safely free unused vnodes back so their number can shrink when not needed. There is a few uses of the v_id field left in the filesystems, scheduled for demolition at a later time. Maybe a one slot cache for unused namecache entries should be implemented to decrease the malloc/free frequency.
1997-05-04 09:17:38 +00:00
vp->v_dd = vp;
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
cache_purge(vp);
1. Add a {pointer, v_id} pair to the vnode to store the reference to the ".." vnode. This is cheaper storagewise than keeping it in the namecache, and it makes more sense since it's a 1:1 mapping. 2. Also handle the case of "." more intelligently rather than stuff the namecache with pointless entries. 3. Add two lists to the vnode and hang namecache entries which go from or to this vnode. When cleaning a vnode, delete all namecache entries it invalidates. 4. Never reuse namecache enties, malloc new ones when we need it, free old ones when they die. No longer a hard limit on how many we can have. 5. Remove the upper limit on namelength of namecache entries. 6. Make a global list for negative namecache entries, limit their number to a sysctl'able (debug.ncnegfactor) fraction of the total namecache. Currently the default fraction is 1/16th. (Suggestions for better default wanted!) 7. Assign v_id correctly in the face of 32bit rollover. 8. Remove the LRU list for namecache entries, not needed. Remove the #ifdef NCH_STATISTICS stuff, it's not needed either. 9. Use the vnode freelist as a true LRU list, also for namecache accesses. 10. Reuse vnodes more aggresively but also more selectively, if we can't reuse, malloc a new one. There is no longer a hard limit on their number, they grow to the point where we don't reuse potentially usable vnodes. A vnode will not get recycled if still has pages in core or if it is the source of namecache entries (Yes, this does indeed work :-) "." and ".." are not namecache entries any longer...) 11. Do not overload the v_id field in namecache entries with whiteout information, use a char sized flags field instead, so we can get rid of the vpid and v_id fields from the namecache struct. Since we're linked to the vnodes and purged when they're cleaned, we don't have to check the v_id any more. 12. NFS knew about the limitation on name length in the namecache, it shouldn't and doesn't now. Bugs: The namecache statistics no longer includes the hits for ".." and "." hits. Performance impact: Generally in the +/- 0.5% for "normal" workstations, but I hope this will allow the system to be selftuning over a bigger range of "special" applications. The case where RAM is available but unused for cache because we don't have any vnodes should be gone. Future work: Straighten out the namecache statistics. "desiredvnodes" is still used to (bogusly ?) size hash tables in the filesystems. I have still to find a way to safely free unused vnodes back so their number can shrink when not needed. There is a few uses of the v_id field left in the filesystems, scheduled for demolition at a later time. Maybe a one slot cache for unused namecache entries should be implemented to decrease the malloc/free frequency.
1997-05-04 09:17:38 +00:00
LIST_INIT(&vp->v_cache_src);
TAILQ_INIT(&vp->v_cache_dst);
numvnodes++;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
1. Add a {pointer, v_id} pair to the vnode to store the reference to the ".." vnode. This is cheaper storagewise than keeping it in the namecache, and it makes more sense since it's a 1:1 mapping. 2. Also handle the case of "." more intelligently rather than stuff the namecache with pointless entries. 3. Add two lists to the vnode and hang namecache entries which go from or to this vnode. When cleaning a vnode, delete all namecache entries it invalidates. 4. Never reuse namecache enties, malloc new ones when we need it, free old ones when they die. No longer a hard limit on how many we can have. 5. Remove the upper limit on namelength of namecache entries. 6. Make a global list for negative namecache entries, limit their number to a sysctl'able (debug.ncnegfactor) fraction of the total namecache. Currently the default fraction is 1/16th. (Suggestions for better default wanted!) 7. Assign v_id correctly in the face of 32bit rollover. 8. Remove the LRU list for namecache entries, not needed. Remove the #ifdef NCH_STATISTICS stuff, it's not needed either. 9. Use the vnode freelist as a true LRU list, also for namecache accesses. 10. Reuse vnodes more aggresively but also more selectively, if we can't reuse, malloc a new one. There is no longer a hard limit on their number, they grow to the point where we don't reuse potentially usable vnodes. A vnode will not get recycled if still has pages in core or if it is the source of namecache entries (Yes, this does indeed work :-) "." and ".." are not namecache entries any longer...) 11. Do not overload the v_id field in namecache entries with whiteout information, use a char sized flags field instead, so we can get rid of the vpid and v_id fields from the namecache struct. Since we're linked to the vnodes and purged when they're cleaned, we don't have to check the v_id any more. 12. NFS knew about the limitation on name length in the namecache, it shouldn't and doesn't now. Bugs: The namecache statistics no longer includes the hits for ".." and "." hits. Performance impact: Generally in the +/- 0.5% for "normal" workstations, but I hope this will allow the system to be selftuning over a bigger range of "special" applications. The case where RAM is available but unused for cache because we don't have any vnodes should be gone. Future work: Straighten out the namecache statistics. "desiredvnodes" is still used to (bogusly ?) size hash tables in the filesystems. I have still to find a way to safely free unused vnodes back so their number can shrink when not needed. There is a few uses of the v_id field left in the filesystems, scheduled for demolition at a later time. Maybe a one slot cache for unused namecache entries should be implemented to decrease the malloc/free frequency.
1997-05-04 09:17:38 +00:00
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
TAILQ_INIT(&vp->v_cleanblkhd);
TAILQ_INIT(&vp->v_dirtyblkhd);
Initialize v_rdev in getnewvnode() - it appears that some filesystems may not properly initialize this field in all cases, and this would result in very anti-social behavior (overwriting on some other random device/location). Submitted by: John Dyson
1995-02-27 06:50:08 +00:00
vp->v_type = VNON;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vp->v_tag = tag;
vp->v_op = vops;
Fix a BUF_TIMELOCK race against BUF_LOCK and fix a deadlock in vget() against VM_WAIT in the pageout code. Both fixes involve adjusting the lockmgr's timeout capability so locks obtained with timeouts do not interfere with locks obtained without a timeout. Hopefully MFC: before the 4.5 release
2001-12-20 22:42:27 +00:00
lockinit(&vp->v_lock, PVFS, "vnlock", VLKTIMEOUT, LK_NOPAUSE);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
insmntque(vp, mp);
*vpp = vp;
vp->v_usecount = 1;
vp->v_data = 0;
Reclaim directory vnodes held in namecache if few free vnodes are available. Only directory vnodes holding no child directory vnodes held in v_cache_src are recycled, so that directory vnodes near the root of the filesystem hierarchy remain in namecache and directory vnodes are not reclaimed in cascade. The period of vnode reclaiming attempt and the number of vnodes attempted to reclaim can be tuned via sysctl(2). Suggested by: tegge Approved by: phk
2001-04-18 11:19:50 +00:00
Fix some vnode management problems, and better mgmt of vnode free list. Fix the UIO optimization code. Fix an assumption in vm_map_insert regarding allocation of swap pagers. Fix an spl problem in the collapse handling in vm_object_deallocate. When pages are freed from vnode objects, and the criteria for putting the associated vnode onto the free list is reached, either put the vnode onto the list, or put it onto an interrupt safe version of the list, for further transfer onto the actual free list. Some minor syntax changes changing pre-decs, pre-incs to post versions. Remove a bogus timeout (that I added for debugging) from vn_lock. PHK will likely still have problems with the vnode list management, and so do I, but it is better than it was.
1998-01-12 01:46:33 +00:00
splx(s);
Clean-up the vget mechanism by permanently attaching VM objects to vnodes, therefore vget doesn't need to do so anymore. Other minor improvements include the temp free vnode queue obeying the VAGE flag and a printf that warns of to-be-removed code being executed.
1998-02-23 06:59:52 +00:00
Simple p_ucred -> td_ucred changes to start using the per-thread ucred reference.
2002-02-27 18:32:23 +00:00
vfs_object_create(vp, td, td->td_ucred);
Reclaim directory vnodes held in namecache if few free vnodes are available. Only directory vnodes holding no child directory vnodes held in v_cache_src are recycled, so that directory vnodes near the root of the filesystem hierarchy remain in namecache and directory vnodes are not reclaimed in cascade. The period of vnode reclaiming attempt and the number of vnodes attempted to reclaim can be tuned via sysctl(2). Suggested by: tegge Approved by: phk
2001-04-18 11:19:50 +00:00
After extensive testing it has been determined that adding complexity to avoid removing higher level directory vnodes from the namecache has no perceivable effect and will be removed. This is especially true when vmiodirenable is turned on, which it is by default now. ( vmiodirenable makes a huge difference in directory caching ). The vfs.vmiodirenable and vfs.nameileafonly sysctls have been left in to allow further testing, but I expect to rip out vfs.nameileafonly soon too. I have also determined through testing that the real problem with numvnodes getting too large is due to the VM Page cache preventing the vnode from being reclaimed. The directory stuff made only a tiny dent relative to Poul's original code, enough so that some tests succeeded. But tests with several million small files show that the bigger problem is the VM Page cache. This will have to be addressed by a future commit. MFC after: 3 days
2001-10-01 04:33:35 +00:00
#if 0
Reclaim directory vnodes held in namecache if few free vnodes are available. Only directory vnodes holding no child directory vnodes held in v_cache_src are recycled, so that directory vnodes near the root of the filesystem hierarchy remain in namecache and directory vnodes are not reclaimed in cascade. The period of vnode reclaiming attempt and the number of vnodes attempted to reclaim can be tuned via sysctl(2). Suggested by: tegge Approved by: phk
2001-04-18 11:19:50 +00:00
vnodeallocs++;
if (vnodeallocs % vnoderecycleperiod == 0 &&
freevnodes < vnoderecycleminfreevn &&
vnoderecyclemintotalvn < numvnodes) {
/* Recycle vnodes. */
cache_purgeleafdirs(vnoderecyclenumber);
}
After extensive testing it has been determined that adding complexity to avoid removing higher level directory vnodes from the namecache has no perceivable effect and will be removed. This is especially true when vmiodirenable is turned on, which it is by default now. ( vmiodirenable makes a huge difference in directory caching ). The vfs.vmiodirenable and vfs.nameileafonly sysctls have been left in to allow further testing, but I expect to rip out vfs.nameileafonly soon too. I have also determined through testing that the real problem with numvnodes getting too large is due to the VM Page cache preventing the vnode from being reclaimed. The directory stuff made only a tiny dent relative to Poul's original code, enough so that some tests succeeded. But tests with several million small files show that the bigger problem is the VM Page cache. This will have to be addressed by a future commit. MFC after: 3 days
2001-10-01 04:33:35 +00:00
#endif
Reclaim directory vnodes held in namecache if few free vnodes are available. Only directory vnodes holding no child directory vnodes held in v_cache_src are recycled, so that directory vnodes near the root of the filesystem hierarchy remain in namecache and directory vnodes are not reclaimed in cascade. The period of vnode reclaiming attempt and the number of vnodes attempted to reclaim can be tuned via sysctl(2). Suggested by: tegge Approved by: phk
2001-04-18 11:19:50 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (0);
}
/*
* Move a vnode from one mount queue to another.
*/
Staticized.
1997-11-22 08:35:46 +00:00
static void
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
insmntque(vp, mp)
register struct vnode *vp;
register struct mount *mp;
{
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mntvnode_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Delete from old mount point vnode list, if on one.
*/
if (vp->v_mount != NULL)
Change the vnode list under the mount point from a LIST to a TAILQ in preparation for an implementation of limiting code for kern.maxvnodes. MFC after: 3 days
2001-10-23 01:21:29 +00:00
TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Insert into list of vnodes for the new mount point, if available.
*/
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if ((vp->v_mount = mp) == NULL) {
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mntvnode_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
Change the vnode list under the mount point from a LIST to a TAILQ in preparation for an implementation of limiting code for kern.maxvnodes. MFC after: 3 days
2001-10-23 01:21:29 +00:00
TAILQ_INSERT_TAIL(&mp->mnt_nvnodelist, vp, v_nmntvnodes);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mntvnode_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Update outstanding I/O count and do wakeup if requested.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vwakeup(bp)
register struct buf *bp;
{
register struct vnode *vp;
bp->b_flags &= ~B_WRITEINPROG;
While in the real world, I had a bad case of being swapped out for a lot of cycles. While waiting there I added a lot of the extra ()'s I have, (I have never used LISP to any extent). So I compiled the kernel with -Wall and shut up a lot of "suggest you add ()'s", removed a bunch of unused var's and added a couple of declarations here and there. Having a lap-top is highly recommended. My kernel still runs, yell at me if you kernel breaks.
1994-09-25 19:34:02 +00:00
if ((vp = bp->b_vp)) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vp->v_numoutput--;
if (vp->v_numoutput < 0)
panic("vwakeup: neg numoutput");
vfs_cluster.c: Various more tweaks from John Dyson to improve read ahead calculations. vfs_subr.c: Only wakeup if numoutput is 0 in vwakeup(). Submitted by: John Dyson
1995-02-22 09:39:22 +00:00
if ((vp->v_numoutput == 0) && (vp->v_flag & VBWAIT)) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vp->v_flag &= ~VBWAIT;
Fixed some formatting weirdness that I overlooked in the previous commit.
1995-01-10 07:32:52 +00:00
wakeup((caddr_t) &vp->v_numoutput);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
}
}
/*
* Flush out and invalidate all buffers associated with a vnode.
* Called with the underlying object locked.
*/
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vinvalbuf(vp, flags, cred, td, slpflag, slptimeo)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
register struct vnode *vp;
int flags;
struct ucred *cred;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int slpflag, slptimeo;
{
register struct buf *bp;
struct buf *nbp, *blist;
int s, error;
"bogus" fixes from 1.1.5 to work around some cache coherency problems.
1994-08-29 06:09:15 +00:00
vm_object_t object;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
With Alfred's permission, remove vm_mtx in favor of a fine-grained approach (this commit is just the first stage). Also add various GIANT_ macros to formalize the removal of Giant, making it easy to test in a more piecemeal fashion. These macros will allow us to test fine-grained locks to a degree before removing Giant, and also after, and to remove Giant in a piecemeal fashion via sysctl's on those subsystems which the authors believe can operate without Giant.
2001-07-04 16:20:28 +00:00
GIANT_REQUIRED;
Introduce a global lock for the vm subsystem (vm_mtx). vm_mtx does not recurse and is required for most low level vm operations. faults can not be taken without holding Giant. Memory subsystems can now call the base page allocators safely. Almost all atomic ops were removed as they are covered under the vm mutex. Alpha and ia64 now need to catch up to i386's trap handlers. FFS and NFS have been tested, other filesystems will need minor changes (grabbing the vm lock when twiddling page properties). Reviewed (partially) by: jake, jhb
2001-05-19 01:28:09 +00:00
Submitted by: Kirk McKusick <mckusick@McKusick.COM> Fix for potential hang when trying to reboot the system or to forcibly unmount a soft update enabled filesystem. FreeBSD already handled the reboot case differently, this is however a better fix.
1998-06-10 18:13:19 +00:00
if (flags & V_SAVE) {
s = splbio();
while (vp->v_numoutput) {
vp->v_flag |= VBWAIT;
Check return value of tsleep(). I've checked of all call points - there does not seem to be a problem with this. PR: kern/8732 Analysis by: David G Andersen <danderse@cs.utah.edu> Tested by: Alfred Perlstein <bright@hotjobs.com>
1998-12-22 00:44:11 +00:00
error = tsleep((caddr_t)&vp->v_numoutput,
slpflag | (PRIBIO + 1), "vinvlbuf", slptimeo);
if (error) {
splx(s);
return (error);
}
Submitted by: Kirk McKusick <mckusick@McKusick.COM> Fix for potential hang when trying to reboot the system or to forcibly unmount a soft update enabled filesystem. FreeBSD already handled the reboot case differently, this is however a better fix.
1998-06-10 18:13:19 +00:00
}
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
if (!TAILQ_EMPTY(&vp->v_dirtyblkhd)) {
Submitted by: Kirk McKusick <mckusick@McKusick.COM> Fix for potential hang when trying to reboot the system or to forcibly unmount a soft update enabled filesystem. FreeBSD already handled the reboot case differently, this is however a better fix.
1998-06-10 18:13:19 +00:00
splx(s);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if ((error = VOP_FSYNC(vp, cred, MNT_WAIT, td)) != 0)
Submitted by: Kirk McKusick <mckusick@McKusick.COM> Fix for potential hang when trying to reboot the system or to forcibly unmount a soft update enabled filesystem. FreeBSD already handled the reboot case differently, this is however a better fix.
1998-06-10 18:13:19 +00:00
return (error);
s = splbio();
if (vp->v_numoutput > 0 ||
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
!TAILQ_EMPTY(&vp->v_dirtyblkhd))
Submitted by: Kirk McKusick <mckusick@McKusick.COM> Fix for potential hang when trying to reboot the system or to forcibly unmount a soft update enabled filesystem. FreeBSD already handled the reboot case differently, this is however a better fix.
1998-06-10 18:13:19 +00:00
panic("vinvalbuf: dirty bufs");
}
splx(s);
}
Even though this looks like it, this is not a complex code change. The interface into the "VMIO" system has changed to be more consistant and robust. Essentially, it is now no longer necessary to call vn_open to get merged VM/Buffer cache operation, and exceptional conditions such as merged operation of VBLK devices is simpler and more correct. This code corrects a potentially large set of problems including the problems with ktrace output and loaded systems, file create/deletes, etc. Most of the changes to NFS are cosmetic and name changes, eliminating a layer of subroutine calls. The direct calls to vput/vrele have been re-instituted for better cross platform compatibility. Reviewed by: davidg
1996-08-21 21:56:23 +00:00
s = splbio();
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (;;) {
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
blist = TAILQ_FIRST(&vp->v_cleanblkhd);
Remove the V_SAVEMETA flag, nothing uses it any more now that msdosfs and ext2fs call vtruncbuf() directly. This simplifies and cleans up vinvalbuf() a little.
1998-10-29 09:51:28 +00:00
if (!blist)
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
blist = TAILQ_FIRST(&vp->v_dirtyblkhd);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (!blist)
break;
for (bp = blist; bp; bp = nbp) {
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
nbp = TAILQ_NEXT(bp, b_vnbufs);
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT)) {
error = BUF_TIMELOCK(bp,
LK_EXCLUSIVE | LK_SLEEPFAIL,
"vinvalbuf", slpflag, slptimeo);
if (error == ENOLCK)
break;
splx(s);
return (error);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
* XXX Since there are no node locks for NFS, I
* believe there is a slight chance that a delayed
* write will occur while sleeping just above, so
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
* check for it. Note that vfs_bio_awrite expects
This patch removes the VOP_BWRITE() vector. VOP_BWRITE() was a hack which made it possible for NFS client side to use struct buf with non-bio backing. This patch takes a more general approach and adds a bp->b_op vector where more methods can be added. The success of this patch depends on bp->b_op being initialized all relevant places for some value of "relevant" which is not easy to determine. For now the buffers have grown a b_magic element which will make such issues a tiny bit easier to debug.
2001-04-17 08:56:39 +00:00
* buffers to reside on a queue, while BUF_WRITE and
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
* brelse do not.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
if (((bp->b_flags & (B_DELWRI | B_INVAL)) == B_DELWRI) &&
(flags & V_SAVE)) {
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
if (bp->b_vp == vp) {
if (bp->b_flags & B_CLUSTEROK) {
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
BUF_UNLOCK(bp);
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
vfs_bio_awrite(bp);
} else {
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
bremfree(bp);
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
bp->b_flags |= B_ASYNC;
Rename the existing BUF_STRATEGY() to DEV_STRATEGY() substitute BUF_WRITE(foo) for VOP_BWRITE(foo->b_vp, foo) substitute BUF_STRATEGY(foo) for VOP_STRATEGY(foo->b_vp, foo) This patch is machine generated except for the ccd.c and buf.h parts.
2000-03-20 11:29:10 +00:00
BUF_WRITE(bp);
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
}
} else {
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
bremfree(bp);
Rename the existing BUF_STRATEGY() to DEV_STRATEGY() substitute BUF_WRITE(foo) for VOP_BWRITE(foo->b_vp, foo) substitute BUF_STRATEGY(foo) for VOP_STRATEGY(foo->b_vp, foo) This patch is machine generated except for the ccd.c and buf.h parts.
2000-03-20 11:29:10 +00:00
(void) BUF_WRITE(bp);
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
}
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
bremfree(bp);
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
bp->b_flags |= (B_INVAL | B_NOCACHE | B_RELBUF);
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
bp->b_flags &= ~B_ASYNC;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
brelse(bp);
}
}
"bogus" fixes from 1.1.5 to work around some cache coherency problems.
1994-08-29 06:09:15 +00:00
vinvalbuf() was only waiting for write-I/O to complete. It really has to wait for both read AND write I/O to complete. Only NFS calls vinvalbuf() on an active vnode (when the server indicates that the file is stale), so this bug fix only effects NFS clients. MFC after: 3 days
2001-10-05 20:10:32 +00:00
/*
* Wait for I/O to complete. XXX needs cleaning up. The vnode can
* have write I/O in-progress but if there is a VM object then the
* VM object can also have read-I/O in-progress.
*/
do {
while (vp->v_numoutput > 0) {
vp->v_flag |= VBWAIT;
tsleep(&vp->v_numoutput, PVM, "vnvlbv", 0);
}
if (VOP_GETVOBJECT(vp, &object) == 0) {
while (object->paging_in_progress)
vm_object_pip_sleep(object, "vnvlbx");
}
} while (vp->v_numoutput > 0);
Fixed splbio problems in vinvalbuf. Closes PR#2875, although fixed differently by me.
1997-03-05 04:54:54 +00:00
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
splx(s);
Don't attempt to sync pages in the V_SAVE case of vinvalbuf; doing so can lead to a deadlock. Just let the VM system deal with it.
1995-03-20 02:08:24 +00:00
/*
* Destroy the copy in the VM cache, too.
*/
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vp->v_interlock);
Add three new VOPs: VOP_CREATEVOBJECT, VOP_DESTROYVOBJECT and VOP_GETVOBJECT. They will be used by nullfs and other stacked filesystems to support full cache coherency. Reviewed in general by: mckusick, dillon
2000-09-12 09:49:08 +00:00
if (VOP_GETVOBJECT(vp, &object) == 0) {
Remove the V_SAVEMETA flag, nothing uses it any more now that msdosfs and ext2fs call vtruncbuf() directly. This simplifies and cleans up vinvalbuf() a little.
1998-10-29 09:51:28 +00:00
vm_object_page_remove(object, 0, 0,
(flags & V_SAVE) ? TRUE : FALSE);
"bogus" fixes from 1.1.5 to work around some cache coherency problems.
1994-08-29 06:09:15 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vp->v_interlock);
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
if (!TAILQ_EMPTY(&vp->v_dirtyblkhd) || !TAILQ_EMPTY(&vp->v_cleanblkhd))
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
panic("vinvalbuf: flush failed");
return (0);
}
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
/*
* Truncate a file's buffer and pages to a specified length. This
* is in lieu of the old vinvalbuf mechanism, which performed unneeded
* sync activity.
*/
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vtruncbuf(vp, cred, td, length, blksize)
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
register struct vnode *vp;
struct ucred *cred;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td;
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
off_t length;
int blksize;
{
register struct buf *bp;
Nitpicking and dusting performed on a train. Removes trivial warnings about unused variables, labels and other lint.
1998-10-25 17:44:59 +00:00
struct buf *nbp;
int s, anyfreed;
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
int trunclbn;
/*
* Round up to the *next* lbn.
*/
Fix an embarassing problem in vtruncbuf.
1998-03-19 18:46:58 +00:00
trunclbn = (length + blksize - 1) / blksize;
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
s = splbio();
restart:
anyfreed = 1;
for (;anyfreed;) {
anyfreed = 0;
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
for (bp = TAILQ_FIRST(&vp->v_cleanblkhd); bp; bp = nbp) {
nbp = TAILQ_NEXT(bp, b_vnbufs);
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
if (bp->b_lblkno >= trunclbn) {
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT)) {
BUF_LOCK(bp, LK_EXCLUSIVE|LK_SLEEPFAIL);
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
goto restart;
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
} else {
bremfree(bp);
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
bp->b_flags |= (B_INVAL | B_RELBUF);
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
bp->b_flags &= ~B_ASYNC;
brelse(bp);
anyfreed = 1;
}
Prettyness police: Identify flags in b_xflags with BX_ to distinguish them from flags in b_flags which are prefixed with B_
1999-12-22 03:11:04 +00:00
if (nbp &&
(((nbp->b_xflags & BX_VNCLEAN) == 0) ||
(nbp->b_vp != vp) ||
(nbp->b_flags & B_DELWRI))) {
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
goto restart;
}
}
}
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
for (bp = TAILQ_FIRST(&vp->v_dirtyblkhd); bp; bp = nbp) {
nbp = TAILQ_NEXT(bp, b_vnbufs);
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
if (bp->b_lblkno >= trunclbn) {
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT)) {
BUF_LOCK(bp, LK_EXCLUSIVE|LK_SLEEPFAIL);
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
goto restart;
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
} else {
bremfree(bp);
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
bp->b_flags |= (B_INVAL | B_RELBUF);
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
bp->b_flags &= ~B_ASYNC;
brelse(bp);
anyfreed = 1;
}
Prettyness police: Identify flags in b_xflags with BX_ to distinguish them from flags in b_flags which are prefixed with B_
1999-12-22 03:11:04 +00:00
if (nbp &&
(((nbp->b_xflags & BX_VNDIRTY) == 0) ||
(nbp->b_vp != vp) ||
(nbp->b_flags & B_DELWRI) == 0)) {
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
goto restart;
}
}
}
}
Correct a severely evil bug in the vtruncbuf code. It didn't cause me any problems until after the previous commit. This problem then caused a severe case of creeping crud on my diskdrive, and hosed my system so bad, that I needed to do a complete reinstall. Sorry!!! I assume that others have manifest this bug.
1998-03-17 06:30:52 +00:00
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
if (length > 0) {
restartsync:
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
for (bp = TAILQ_FIRST(&vp->v_dirtyblkhd); bp; bp = nbp) {
nbp = TAILQ_NEXT(bp, b_vnbufs);
Correct a severely evil bug in the vtruncbuf code. It didn't cause me any problems until after the previous commit. This problem then caused a severe case of creeping crud on my diskdrive, and hosed my system so bad, that I needed to do a complete reinstall. Sorry!!! I assume that others have manifest this bug.
1998-03-17 06:30:52 +00:00
if ((bp->b_flags & B_DELWRI) && (bp->b_lblkno < 0)) {
Convert buffer locking from using the B_BUSY and B_WANTED flags to using lockmgr locks. This commit should be functionally equivalent to the old semantics. That is, all buffer locking is done with LK_EXCLUSIVE requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will be done in future commits.
1999-06-26 02:47:16 +00:00
if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT)) {
BUF_LOCK(bp, LK_EXCLUSIVE|LK_SLEEPFAIL);
goto restart;
Correct a severely evil bug in the vtruncbuf code. It didn't cause me any problems until after the previous commit. This problem then caused a severe case of creeping crud on my diskdrive, and hosed my system so bad, that I needed to do a complete reinstall. Sorry!!! I assume that others have manifest this bug.
1998-03-17 06:30:52 +00:00
} else {
bremfree(bp);
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
if (bp->b_vp == vp) {
bp->b_flags |= B_ASYNC;
} else {
bp->b_flags &= ~B_ASYNC;
}
Rename the existing BUF_STRATEGY() to DEV_STRATEGY() substitute BUF_WRITE(foo) for VOP_BWRITE(foo->b_vp, foo) substitute BUF_STRATEGY(foo) for VOP_STRATEGY(foo->b_vp, foo) This patch is machine generated except for the ccd.c and buf.h parts.
2000-03-20 11:29:10 +00:00
BUF_WRITE(bp);
Correct a severely evil bug in the vtruncbuf code. It didn't cause me any problems until after the previous commit. This problem then caused a severe case of creeping crud on my diskdrive, and hosed my system so bad, that I needed to do a complete reinstall. Sorry!!! I assume that others have manifest this bug.
1998-03-17 06:30:52 +00:00
}
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
goto restartsync;
Correct a severely evil bug in the vtruncbuf code. It didn't cause me any problems until after the previous commit. This problem then caused a severe case of creeping crud on my diskdrive, and hosed my system so bad, that I needed to do a complete reinstall. Sorry!!! I assume that others have manifest this bug.
1998-03-17 06:30:52 +00:00
}
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
Correct a severely evil bug in the vtruncbuf code. It didn't cause me any problems until after the previous commit. This problem then caused a severe case of creeping crud on my diskdrive, and hosed my system so bad, that I needed to do a complete reinstall. Sorry!!! I assume that others have manifest this bug.
1998-03-17 06:30:52 +00:00
}
}
while (vp->v_numoutput > 0) {
vp->v_flag |= VBWAIT;
tsleep(&vp->v_numoutput, PVM, "vbtrunc", 0);
}
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
splx(s);
vnode_pager_setsize(vp, length);
return (0);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Associate a buffer with a vnode.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bgetvp(vp, bp)
register struct vnode *vp;
register struct buf *bp;
{
Protect vnode buffer chain manipulation with splbio to prevent list corruption..
1994-12-23 04:52:55 +00:00
int s;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
KASSERT(bp->b_vp == NULL, ("bgetvp: not free"));
KNFize, by bde.
1999-01-10 01:58:29 +00:00
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
vhold(vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bp->b_vp = vp;
Introduce vn_isdisk(struct vnode *vp) function, and use it to test for diskness.
1999-08-25 12:24:39 +00:00
bp->b_dev = vn_todev(vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Insert onto list for new vnode.
*/
Protect vnode buffer chain manipulation with splbio to prevent list corruption..
1994-12-23 04:52:55 +00:00
s = splbio();
Prettyness police: Identify flags in b_xflags with BX_ to distinguish them from flags in b_flags which are prefixed with B_
1999-12-22 03:11:04 +00:00
bp->b_xflags |= BX_VNCLEAN;
bp->b_xflags &= ~BX_VNDIRTY;
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
TAILQ_INSERT_TAIL(&vp->v_cleanblkhd, bp, b_vnbufs);
Protect vnode buffer chain manipulation with splbio to prevent list corruption..
1994-12-23 04:52:55 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Disassociate a buffer from a vnode.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
brelvp(bp)
register struct buf *bp;
{
struct vnode *vp;
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
struct buflists *listheadp;
Protect vnode buffer chain manipulation with splbio to prevent list corruption..
1994-12-23 04:52:55 +00:00
int s;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
KASSERT(bp->b_vp != NULL, ("brelvp: NULL"));
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Delete from old vnode list, if on one.
*/
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
vp = bp->b_vp;
Protect vnode buffer chain manipulation with splbio to prevent list corruption..
1994-12-23 04:52:55 +00:00
s = splbio();
Prettyness police: Identify flags in b_xflags with BX_ to distinguish them from flags in b_flags which are prefixed with B_
1999-12-22 03:11:04 +00:00
if (bp->b_xflags & (BX_VNDIRTY | BX_VNCLEAN)) {
if (bp->b_xflags & BX_VNDIRTY)
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
listheadp = &vp->v_dirtyblkhd;
else
listheadp = &vp->v_cleanblkhd;
TAILQ_REMOVE(listheadp, bp, b_vnbufs);
Prettyness police: Identify flags in b_xflags with BX_ to distinguish them from flags in b_flags which are prefixed with B_
1999-12-22 03:11:04 +00:00
bp->b_xflags &= ~(BX_VNDIRTY | BX_VNCLEAN);
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
}
if ((vp->v_flag & VONWORKLST) && TAILQ_EMPTY(&vp->v_dirtyblkhd)) {
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
vp->v_flag &= ~VONWORKLST;
LIST_REMOVE(vp, v_synclist);
}
Protect vnode buffer chain manipulation with splbio to prevent list corruption..
1994-12-23 04:52:55 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bp->b_vp = (struct vnode *) 0;
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
vdrop(vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* Add an item to the syncer work queue.
*/
Protect vn worklist and vn->v_{clean,dirty}blkhd at splbio(). Get rid of extra LIST_REMOVE() Reviewed by: hsu@FreeBSD.ORG (Jeffrey Hsu), mckusick@McKusick.COM Submitted by: hsu@FreeBSD.ORG (Jeffrey Hsu), dillon@backplane.com ( Matthew Dillon )
1999-02-19 17:36:58 +00:00
static void
vn_syncer_add_to_worklist(struct vnode *vp, int delay)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
{
int s, slot;
s = splbio();
if (vp->v_flag & VONWORKLST) {
LIST_REMOVE(vp, v_synclist);
}
if (delay > syncer_maxdelay - 2)
delay = syncer_maxdelay - 2;
slot = (syncer_delayno + delay) & syncer_mask;
LIST_INSERT_HEAD(&syncer_workitem_pending[slot], vp, v_synclist);
vp->v_flag |= VONWORKLST;
splx(s);
}
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
struct proc *updateproc;
Remove __P.
2002-03-19 21:25:46 +00:00
static void sched_sync(void);
Slight reorganization of kernel thread/process creation. Instead of using SYSINIT_KT() etc (which is a static, compile-time procedure), use a NetBSD-style kthread_create() interface. kproc_start is still available as a SYSINIT() hook. This allowed simplification of chunks of the sysinit code in the process. This kthread_create() is our old kproc_start internals, with the SYSINIT_KT fork hooks grafted in and tweaked to work the same as the NetBSD one. One thing I'd like to do shortly is get rid of nfsiod as a user initiated process. It makes sense for the nfs client code to create them on the fly as needed up to a user settable limit. This means that nfsiod doesn't need to be in /sbin and is always "available". This is a fair bit easier to do outside of the SYSINIT_KT() framework.
1999-07-01 13:21:46 +00:00
static struct kproc_desc up_kp = {
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
"syncer",
sched_sync,
&updateproc
};
Slight reorganization of kernel thread/process creation. Instead of using SYSINIT_KT() etc (which is a static, compile-time procedure), use a NetBSD-style kthread_create() interface. kproc_start is still available as a SYSINIT() hook. This allowed simplification of chunks of the sysinit code in the process. This kthread_create() is our old kproc_start internals, with the SYSINIT_KT fork hooks grafted in and tweaked to work the same as the NetBSD one. One thing I'd like to do shortly is get rid of nfsiod as a user initiated process. It makes sense for the nfs client code to create them on the fly as needed up to a user settable limit. This means that nfsiod doesn't need to be in /sbin and is always "available". This is a fair bit easier to do outside of the SYSINIT_KT() framework.
1999-07-01 13:21:46 +00:00
SYSINIT(syncer, SI_SUB_KTHREAD_UPDATE, SI_ORDER_FIRST, kproc_start, &up_kp)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* System filesystem synchronizer daemon.
*/
void
sched_sync(void)
{
struct synclist *slp;
struct vnode *vp;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct mount *mp;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
long starttime;
int s;
Pre-KSE/M3 commit. this is a low-functionality change that changes the kernel to access the main thread of a process via the linked list of threads rather than assuming that it is embedded in the process. It IS still embeded there but remove all teh code that assumes that in preparation for the next commit which will actually move it out. Reviewed by: peter@freebsd.org, gallatin@cs.duke.edu, benno rice,
2002-02-07 20:58:47 +00:00
struct thread *td = FIRST_THREAD_IN_PROC(updateproc); /* XXXKSE */
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&Giant);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
EVENTHANDLER_REGISTER(shutdown_pre_sync, kproc_shutdown, td->td_proc,
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
SHUTDOWN_PRI_LAST);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
for (;;) {
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
kthread_suspend_check(td->td_proc);
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
Eradicate the variable "time" from the kernel, using various measures. "time" wasn't a atomic variable, so splfoo() protection were needed around any access to it, unless you just wanted the seconds part. Most uses of time.tv_sec now uses the new variable time_second instead. gettime() changed to getmicrotime(0. Remove a couple of unneeded splfoo() protections, the new getmicrotime() is atomic, (until Bruce sets a breakpoint in it). A couple of places needed random data, so use read_random() instead of mucking about with time which isn't random. Add a new nfs_curusec() function. Mark a couple of bogosities involving the now disappeard time variable. Update ffs_update() to avoid the weird "== &time" checks, by fixing the one remaining call that passwd &time as args. Change profiling in ncr.c to use ticks instead of time. Resolution is the same. Add new function "tvtohz()" to avoid the bogus "splfoo(), add time, call hzto() which subtracts time" sequences. Reviewed by: bde
1998-03-30 09:56:58 +00:00
starttime = time_second;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
Protect vn worklist and vn->v_{clean,dirty}blkhd at splbio(). Get rid of extra LIST_REMOVE() Reviewed by: hsu@FreeBSD.ORG (Jeffrey Hsu), mckusick@McKusick.COM Submitted by: hsu@FreeBSD.ORG (Jeffrey Hsu), dillon@backplane.com ( Matthew Dillon )
1999-02-19 17:36:58 +00:00
* Push files whose dirty time has expired. Be careful
* of interrupt race on slp queue.
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
*/
s = splbio();
slp = &syncer_workitem_pending[syncer_delayno];
syncer_delayno += 1;
if (syncer_delayno == syncer_maxdelay)
syncer_delayno = 0;
splx(s);
while ((vp = LIST_FIRST(slp)) != NULL) {
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (VOP_ISLOCKED(vp, NULL) == 0 &&
vn_start_write(vp, &mp, V_NOWAIT) == 0) {
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY, td);
Simple p_ucred -> td_ucred changes to start using the per-thread ucred reference.
2002-02-27 18:32:23 +00:00
(void) VOP_FSYNC(vp, td->td_ucred, MNT_LAZY, td);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
VOP_UNLOCK(vp, 0, td);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
vn_finished_write(mp);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
}
Protect vn worklist and vn->v_{clean,dirty}blkhd at splbio(). Get rid of extra LIST_REMOVE() Reviewed by: hsu@FreeBSD.ORG (Jeffrey Hsu), mckusick@McKusick.COM Submitted by: hsu@FreeBSD.ORG (Jeffrey Hsu), dillon@backplane.com ( Matthew Dillon )
1999-02-19 17:36:58 +00:00
s = splbio();
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
if (LIST_FIRST(slp) == vp) {
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
/*
* Note: v_tag VT_VFS vps can remain on the
* worklist too with no dirty blocks, but
* since sync_fsync() moves it to a different
* slot we are safe.
*/
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
if (TAILQ_EMPTY(&vp->v_dirtyblkhd) &&
Give vn_isdisk() a second argument where it can return a suitable errno. Suggested by: bde
2000-01-10 12:04:27 +00:00
!vn_isdisk(vp, NULL))
Protect vn worklist and vn->v_{clean,dirty}blkhd at splbio(). Get rid of extra LIST_REMOVE() Reviewed by: hsu@FreeBSD.ORG (Jeffrey Hsu), mckusick@McKusick.COM Submitted by: hsu@FreeBSD.ORG (Jeffrey Hsu), dillon@backplane.com ( Matthew Dillon )
1999-02-19 17:36:58 +00:00
panic("sched_sync: fsync failed vp %p tag %d", vp, vp->v_tag);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
Protect vn worklist and vn->v_{clean,dirty}blkhd at splbio(). Get rid of extra LIST_REMOVE() Reviewed by: hsu@FreeBSD.ORG (Jeffrey Hsu), mckusick@McKusick.COM Submitted by: hsu@FreeBSD.ORG (Jeffrey Hsu), dillon@backplane.com ( Matthew Dillon )
1999-02-19 17:36:58 +00:00
* Put us back on the worklist. The worklist
* routine will remove us from our current
* position and then add us back in at a later
* position.
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
*/
vn_syncer_add_to_worklist(vp, syncdelay);
}
Protect vn worklist and vn->v_{clean,dirty}blkhd at splbio(). Get rid of extra LIST_REMOVE() Reviewed by: hsu@FreeBSD.ORG (Jeffrey Hsu), mckusick@McKusick.COM Submitted by: hsu@FreeBSD.ORG (Jeffrey Hsu), dillon@backplane.com ( Matthew Dillon )
1999-02-19 17:36:58 +00:00
splx(s);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
/*
* Do soft update processing.
*/
Make the two calls from kern/* into softupdates #ifdef SOFTUPDATES, that is way cleaner than using the softupdates_stub stunt, which should be killed when convenient. Discussed with: mckusick
2000-07-03 13:26:54 +00:00
#ifdef SOFTUPDATES
Virtualizes & untangles the bioops operations vector. Ref: Message-ID: <18317.961014572@critter.freebsd.dk> To: current@
2000-06-16 08:48:51 +00:00
softdep_process_worklist(NULL);
Make the two calls from kern/* into softupdates #ifdef SOFTUPDATES, that is way cleaner than using the softupdates_stub stunt, which should be killed when convenient. Discussed with: mckusick
2000-07-03 13:26:54 +00:00
#endif
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* The variable rushjob allows the kernel to speed up the
* processing of the filesystem syncer process. A rushjob
* value of N tells the filesystem syncer to process the next
* N seconds worth of work on its queue ASAP. Currently rushjob
* is used by the soft update code to speed up the filesystem
* syncer process when the incore state is getting so far
* ahead of the disk that the kernel memory pool is being
* threatened with exhaustion.
*/
if (rushjob > 0) {
rushjob -= 1;
continue;
}
/*
* If it has taken us less than a second to process the
* current work, then wait. Otherwise start right over
* again. We can still lose time if any single round
* takes more than two seconds, but it does not really
* matter as we are just trying to generally pace the
* filesystem activity.
*/
Eradicate the variable "time" from the kernel, using various measures. "time" wasn't a atomic variable, so splfoo() protection were needed around any access to it, unless you just wanted the seconds part. Most uses of time.tv_sec now uses the new variable time_second instead. gettime() changed to getmicrotime(0. Remove a couple of unneeded splfoo() protections, the new getmicrotime() is atomic, (until Bruce sets a breakpoint in it). A couple of places needed random data, so use read_random() instead of mucking about with time which isn't random. Add a new nfs_curusec() function. Mark a couple of bogosities involving the now disappeard time variable. Update ffs_update() to avoid the weird "== &time" checks, by fixing the one remaining call that passwd &time as args. Change profiling in ncr.c to use ticks instead of time. Resolution is the same. Add new function "tvtohz()" to avoid the bogus "splfoo(), add time, call hzto() which subtracts time" sequences. Reviewed by: bde
1998-03-30 09:56:58 +00:00
if (time_second == starttime)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
tsleep(&lbolt, PPAUSE, "syncer", 0);
}
}
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
/*
* Request the syncer daemon to speed up its work.
* We never push it to speed up more than half of its
* normal turn time, otherwise it could take over the cpu.
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
* XXXKSE only one update?
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
*/
int
speedup_syncer()
{
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock_spin(&sched_lock);
Pre-KSE/M3 commit. this is a low-functionality change that changes the kernel to access the main thread of a process via the linked list of threads rather than assuming that it is embedded in the process. It IS still embeded there but remove all teh code that assumes that in preparation for the next commit which will actually move it out. Reviewed by: peter@freebsd.org, gallatin@cs.duke.edu, benno rice,
2002-02-07 20:58:47 +00:00
if (FIRST_THREAD_IN_PROC(updateproc)->td_wchan == &lbolt) /* XXXKSE */
setrunnable(FIRST_THREAD_IN_PROC(updateproc));
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock_spin(&sched_lock);
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
if (rushjob < syncdelay / 2) {
rushjob += 1;
stat_rush_requests += 1;
return (1);
}
return(0);
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
/*
* Associate a p-buffer with a vnode.
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
*
* Also sets B_PAGING flag to indicate that vnode is not fully associated
* with the buffer. i.e. the bp has not been linked into the vnode or
* ref-counted.
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
*/
void
pbgetvp(vp, bp)
register struct vnode *vp;
register struct buf *bp;
{
KNFize, by bde.
1999-01-10 01:58:29 +00:00
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
KASSERT(bp->b_vp == NULL, ("pbgetvp: not free"));
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
bp->b_vp = vp;
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
bp->b_flags |= B_PAGING;
Introduce vn_isdisk(struct vnode *vp) function, and use it to test for diskness.
1999-08-25 12:24:39 +00:00
bp->b_dev = vn_todev(vp);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
/*
* Disassociate a p-buffer from a vnode.
*/
void
pbrelvp(bp)
register struct buf *bp;
{
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
KASSERT(bp->b_vp != NULL, ("pbrelvp: NULL"));
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
/* XXX REMOVE ME */
Mechanical change to use <sys/queue.h> macro API instead of fondling implementation details. Created with: sed(1) Reviewed by: md5(1)
2001-02-04 13:13:25 +00:00
if (TAILQ_NEXT(bp, b_vnbufs) != NULL) {
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
panic(
"relpbuf(): b_vp was probably reassignbuf()d %p %x",
bp,
(int)bp->b_flags
);
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
bp->b_vp = (struct vnode *) 0;
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
bp->b_flags &= ~B_PAGING;
}
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
* Change the vnode a pager buffer is associated with.
*/
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
void
pbreassignbuf(bp, newvp)
struct buf *bp;
struct vnode *newvp;
{
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
KASSERT(bp->b_flags & B_PAGING,
("pbreassignbuf() on non phys bp %p", bp));
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
bp->b_vp = newvp;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Reassign a buffer from one vnode to another.
* Used to assign file specific control information
* (indirect blocks) to the vnode to which they belong.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
reassignbuf(bp, newvp)
register struct buf *bp;
register struct vnode *newvp;
{
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
struct buflists *listheadp;
int delay;
Certain vnode buffer list operations were not being spl protected, and they needed to be. Brelse for example can be called at interrupt level, and the buffer list operations were not being protected from it.
1996-08-15 06:45:01 +00:00
int s;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (newvp == NULL) {
printf("reassignbuf: NULL");
return;
}
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
++reassignbufcalls;
Certain vnode buffer list operations were not being spl protected, and they needed to be. Brelse for example can be called at interrupt level, and the buffer list operations were not being protected from it.
1996-08-15 06:45:01 +00:00
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
/*
* B_PAGING flagged buffers cannot be reassigned because their vp
* is not fully linked in.
*/
if (bp->b_flags & B_PAGING)
panic("cannot reassign paging buffer");
Certain vnode buffer list operations were not being spl protected, and they needed to be. Brelse for example can be called at interrupt level, and the buffer list operations were not being protected from it.
1996-08-15 06:45:01 +00:00
s = splbio();
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Delete from old vnode list, if on one.
*/
Prettyness police: Identify flags in b_xflags with BX_ to distinguish them from flags in b_flags which are prefixed with B_
1999-12-22 03:11:04 +00:00
if (bp->b_xflags & (BX_VNDIRTY | BX_VNCLEAN)) {
if (bp->b_xflags & BX_VNDIRTY)
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
listheadp = &bp->b_vp->v_dirtyblkhd;
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
else
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
listheadp = &bp->b_vp->v_cleanblkhd;
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
TAILQ_REMOVE(listheadp, bp, b_vnbufs);
Prettyness police: Identify flags in b_xflags with BX_ to distinguish them from flags in b_flags which are prefixed with B_
1999-12-22 03:11:04 +00:00
bp->b_xflags &= ~(BX_VNDIRTY | BX_VNCLEAN);
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
if (bp->b_vp != newvp) {
vdrop(bp->b_vp);
bp->b_vp = NULL; /* for clarification */
}
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
* If dirty, put on list of dirty buffers; otherwise insert onto list
* of clean buffers.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (bp->b_flags & B_DELWRI) {
struct buf *tbp;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
listheadp = &newvp->v_dirtyblkhd;
if ((newvp->v_flag & VONWORKLST) == 0) {
switch (newvp->v_type) {
case VDIR:
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
delay = dirdelay;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
break;
Convert various pieces of code to use vn_isdisk() rather than checking for vp->v_type == VBLK. In ccd: we don't need to call VOP_GETATTR to find the type of a vnode. Reviewed by: sos
1999-11-22 10:33:55 +00:00
case VCHR:
Blow away the v_specmountpoint define, replacing it with what it was defined as (rdev->si_mountpoint)
2000-10-09 17:31:39 +00:00
if (newvp->v_rdev->si_mountpoint != NULL) {
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
delay = metadelay;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
break;
}
/* fall through */
default:
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
delay = filedelay;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
vn_syncer_add_to_worklist(newvp, delay);
}
Prettyness police: Identify flags in b_xflags with BX_ to distinguish them from flags in b_flags which are prefixed with B_
1999-12-22 03:11:04 +00:00
bp->b_xflags |= BX_VNDIRTY;
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
tbp = TAILQ_FIRST(listheadp);
if (tbp == NULL ||
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
bp->b_lblkno == 0 ||
Enhance reassignbuf(). When a buffer cannot be time-optimally inserted into vnode dirtyblkhd we append it to the list instead of prepend it to the list in order to maintain a 'forward' locality of reference, which is arguably better then 'reverse'. The original algorithm did things this way to but at a huge time cost. Enhance the append interlock for NFS writes to handle intr/soft mounts better. Fix the hysteresis for NFS async daemon I/O requests to reduce the number of unnecessary context switches. Modify handling of NFS mount options. Any given user option that is too high now defaults to the kernel maximum for that option rather then the kernel default for that option. Reviewed by: Alfred Perlstein <bright@wintelcom.net>
2000-01-05 05:11:37 +00:00
(bp->b_lblkno > 0 && tbp->b_lblkno < 0) ||
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
(bp->b_lblkno > 0 && bp->b_lblkno < tbp->b_lblkno)) {
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
TAILQ_INSERT_HEAD(listheadp, bp, b_vnbufs);
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
++reassignbufsortgood;
} else if (bp->b_lblkno < 0) {
TAILQ_INSERT_TAIL(listheadp, bp, b_vnbufs);
++reassignbufsortgood;
} else if (reassignbufmethod == 1) {
/*
* New sorting algorithm, only handle sequential case,
Enhance reassignbuf(). When a buffer cannot be time-optimally inserted into vnode dirtyblkhd we append it to the list instead of prepend it to the list in order to maintain a 'forward' locality of reference, which is arguably better then 'reverse'. The original algorithm did things this way to but at a huge time cost. Enhance the append interlock for NFS writes to handle intr/soft mounts better. Fix the hysteresis for NFS async daemon I/O requests to reduce the number of unnecessary context switches. Modify handling of NFS mount options. Any given user option that is too high now defaults to the kernel maximum for that option rather then the kernel default for that option. Reviewed by: Alfred Perlstein <bright@wintelcom.net>
2000-01-05 05:11:37 +00:00
* otherwise append to end (but before metadata)
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
*/
if ((tbp = gbincore(newvp, bp->b_lblkno - 1)) != NULL &&
Prettyness police: Identify flags in b_xflags with BX_ to distinguish them from flags in b_flags which are prefixed with B_
1999-12-22 03:11:04 +00:00
(tbp->b_xflags & BX_VNDIRTY)) {
Enhance reassignbuf(). When a buffer cannot be time-optimally inserted into vnode dirtyblkhd we append it to the list instead of prepend it to the list in order to maintain a 'forward' locality of reference, which is arguably better then 'reverse'. The original algorithm did things this way to but at a huge time cost. Enhance the append interlock for NFS writes to handle intr/soft mounts better. Fix the hysteresis for NFS async daemon I/O requests to reduce the number of unnecessary context switches. Modify handling of NFS mount options. Any given user option that is too high now defaults to the kernel maximum for that option rather then the kernel default for that option. Reviewed by: Alfred Perlstein <bright@wintelcom.net>
2000-01-05 05:11:37 +00:00
/*
* Found the best place to insert the buffer
*/
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
TAILQ_INSERT_AFTER(listheadp, tbp, bp, b_vnbufs);
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
++reassignbufsortgood;
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
} else {
Enhance reassignbuf(). When a buffer cannot be time-optimally inserted into vnode dirtyblkhd we append it to the list instead of prepend it to the list in order to maintain a 'forward' locality of reference, which is arguably better then 'reverse'. The original algorithm did things this way to but at a huge time cost. Enhance the append interlock for NFS writes to handle intr/soft mounts better. Fix the hysteresis for NFS async daemon I/O requests to reduce the number of unnecessary context switches. Modify handling of NFS mount options. Any given user option that is too high now defaults to the kernel maximum for that option rather then the kernel default for that option. Reviewed by: Alfred Perlstein <bright@wintelcom.net>
2000-01-05 05:11:37 +00:00
/*
* Missed, append to end, but before meta-data.
* We know that the head buffer in the list is
* not meta-data due to prior conditionals.
*
* Indirect effects: NFS second stage write
* tends to wind up here, giving maximum
* distance between the unstable write and the
* commit rpc.
*/
tbp = TAILQ_LAST(listheadp, buflists);
while (tbp && tbp->b_lblkno < 0)
tbp = TAILQ_PREV(tbp, buflists, b_vnbufs);
TAILQ_INSERT_AFTER(listheadp, tbp, bp, b_vnbufs);
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
++reassignbufsortbad;
}
} else {
/*
* Old sorting algorithm, scan queue and insert
*/
struct buf *ttbp;
while ((ttbp = TAILQ_NEXT(tbp, b_vnbufs)) &&
(ttbp->b_lblkno < bp->b_lblkno)) {
++reassignbufloops;
tbp = ttbp;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
TAILQ_INSERT_AFTER(listheadp, tbp, bp, b_vnbufs);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
} else {
Prettyness police: Identify flags in b_xflags with BX_ to distinguish them from flags in b_flags which are prefixed with B_
1999-12-22 03:11:04 +00:00
bp->b_xflags |= BX_VNCLEAN;
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
TAILQ_INSERT_TAIL(&newvp->v_cleanblkhd, bp, b_vnbufs);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
if ((newvp->v_flag & VONWORKLST) &&
Convert lists for bufs attached to vnodes from a LIST to a TAILQ. - Use TAILQ_* macros extensively instead of internal names - use b_xflags instead of the NOLIST magic number hack in the next pointer - clean bufs are inserted at the tail rather than the head. - redo dirty buffer insert so that metadata (negative lbn) goes to the tail directly rather than at the HEAD. This makes a difference when inserting dirty data blocks in lbn sorted order since data block insertion will not have to bypass all the metadata cruft. data is lbn sorted since it makes sense for clustering and writeback ordering, while metadata sorting doesn't help much since the lbn's are meaningless when walking the list for writebacks. Small systems will not notice much (if any) benefit from this, but really busy systems with large dirty block lists should get a lot more. I've tested this with softdep, and it doesn't seem to mind the change of queueing of metadata. Reviewed (in princible) by: dg Obtained from: partly from John Dyson's work-in-progress patches in June.
1998-10-31 14:20:39 +00:00
TAILQ_EMPTY(&newvp->v_dirtyblkhd)) {
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
newvp->v_flag &= ~VONWORKLST;
LIST_REMOVE(newvp, v_synclist);
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
Reviewed by: Many at differnt times in differnt parts, including alan, john, me, luoqi, and kirk Submitted by: Matt Dillon <dillon@frebsd.org> This change implements a relatively sophisticated fix to getnewbuf(). There were two problems with getnewbuf(). First, the writerecursion can lead to a system stack overflow when you have NFS and/or VN devices in the system. Second, the free/dirty buffer accounting was completely broken. Not only did the nfs routines blow it trying to manually account for the buffer state, but the accounting that was done did not work well with the purpose of their existance: figuring out when getnewbuf() needs to sleep. The meat of the change is to kern/vfs_bio.c. The remaining diffs are all minor except for NFS, which includes both the fixes for bp interaction AND fixes for a 'biodone(): buffer already done' lockup. Sys/buf.h also contains a chaining structure which is not used by this patchset but is used by other patches that are coming soon. This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF. (sorry for the missing T matt)
1999-03-12 02:24:58 +00:00
if (bp->b_vp != newvp) {
bp->b_vp = newvp;
vhold(bp->b_vp);
}
Certain vnode buffer list operations were not being spl protected, and they needed to be. Brelse for example can be called at interrupt level, and the buffer list operations were not being protected from it.
1996-08-15 06:45:01 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
Take VBLK devices further out of their missery. This should fix the panic I introduced in my previous commit on this topic.
2000-11-02 21:14:13 +00:00
* Create a vnode for a device.
Removed yet more vestiges of config-time swap configuration and/or cleaned up nearby cruft.
1997-09-07 16:21:11 +00:00
* Used for mounting the root file system.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bdevvp(dev, vpp)
dev_t dev;
struct vnode **vpp;
{
register struct vnode *vp;
struct vnode *nvp;
int error;
Simplify cdevsw registration. The cdevsw_add() function now finds the major number(s) in the struct cdevsw passed to it. cdevsw_add_generic() is no longer needed, cdevsw_add() does the same thing. cdevsw_add() will print an message if the d_maj field looks bogus. Remove nblkdev and nchrdev variables. Most places they were used bogusly. Instead check a dev_t for validity by seeing if devsw() or bdevsw() returns NULL. Move bdevsw() and devsw() functions to kern/kern_conf.c Bump __FreeBSD_version to 400006 This commit removes: 72 bogus makedev() calls 26 bogus SYSINIT functions if_xe.c bogusly accessed cdevsw[], author/maintainer please fix. I4b and vinum not changed. Patches emailed to authors. LINT probably broken until they catch up.
1999-05-31 11:29:30 +00:00
if (dev == NODEV) {
Fixed device number checking in bdevvp(): - dev != NODEV was checked for, but 0 was returned on failure. This was fixed in Lite2 (except the return code was still slightly wrong (ENODEV instead of ENXIO)) but the changes were not merged. This case probably doesn't actually occur under FreeBSD. - major(dev) was not checked to have a valid non-NULL bdevsw entry. This caused panics when the driver for the root device didn't exist. Fixed minor misformattings in bdevvp(). Rev.1.14 consisted mainly of gratuitous reformattings that seem to have caused many Lite2 merge errors. PR: 8417
1998-10-25 16:11:49 +00:00
*vpp = NULLVP;
return (ENXIO);
}
Do the right thing if bdevvp is called twice for the same device. Obtained from: Poul-Henning Kamp <phk@freebsd.org>
2000-09-27 18:03:17 +00:00
if (vfinddev(dev, VCHR, vpp))
return (0);
Fixed device number checking in bdevvp(): - dev != NODEV was checked for, but 0 was returned on failure. This was fixed in Lite2 (except the return code was still slightly wrong (ENODEV instead of ENXIO)) but the changes were not merged. This case probably doesn't actually occur under FreeBSD. - major(dev) was not checked to have a valid non-NULL bdevsw entry. This caused panics when the driver for the root device didn't exist. Fixed minor misformattings in bdevvp(). Rev.1.14 consisted mainly of gratuitous reformattings that seem to have caused many Lite2 merge errors. PR: 8417
1998-10-25 16:11:49 +00:00
error = getnewvnode(VT_NON, (struct mount *)0, spec_vnodeop_p, &nvp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (error) {
Fixed device number checking in bdevvp(): - dev != NODEV was checked for, but 0 was returned on failure. This was fixed in Lite2 (except the return code was still slightly wrong (ENODEV instead of ENXIO)) but the changes were not merged. This case probably doesn't actually occur under FreeBSD. - major(dev) was not checked to have a valid non-NULL bdevsw entry. This caused panics when the driver for the root device didn't exist. Fixed minor misformattings in bdevvp(). Rev.1.14 consisted mainly of gratuitous reformattings that seem to have caused many Lite2 merge errors. PR: 8417
1998-10-25 16:11:49 +00:00
*vpp = NULLVP;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (error);
}
vp = nvp;
Fix the rootmount code for now. This function will probably rewritten/renamed to devpp. Submitted by: Assar Westerlund <assar@sics.se> on -current Confirmed to work: Steinar Haug <sthaug@nethelp.no>, Manfred Antar <mantar@pacbell.net> Reviewed by: phk
2000-05-14 07:43:12 +00:00
vp->v_type = VCHR;
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
addalias(vp, dev);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*vpp = vp;
return (0);
}
/*
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
* Add vnode to the alias list hung off the dev_t.
*
* The reason for this gunk is that multiple vnodes can reference
* the same physical device, so checking vp->v_usecount to see
* how many users there are is inadequate; the v_usecount for
* the vnodes need to be accumulated. vcount() does that.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
struct vnode *
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
addaliasu(nvp, nvp_rdev)
struct vnode *nvp;
Divorce "dev_t" from the "major|minor" bitmap, which is now called udev_t in the kernel but still called dev_t in userland. Provide functions to manipulate both types: major() umajor() minor() uminor() makedev() umakedev() dev2udev() udev2dev() For now they're functions, they will become in-line functions after one of the next two steps in this process. Return major/minor/makedev to macro-hood for userland. Register a name in cdevsw[] for the "filedescriptor" driver. In the kernel the udev_t appears in places where we have the major/minor number combination, (ie: a potential device: we may not have the driver nor the device), like in inodes, vattr, cdevsw registration and so on, whereas the dev_t appears where we carry around a reference to a actual device. In the future the cdevsw and the aliased-from vnode will be hung directly from the dev_t, along with up to two softc pointers for the device driver and a few houskeeping bits. This will essentially replace the current "alias" check code (same buck, bigger bang). A little stunt has been provided to try to catch places where the wrong type is being used (dev_t vs udev_t), if you see something not working, #undef DEVT_FASCIST in kern/kern_conf.c and see if it makes a difference. If it does, please try to track it down (many hands make light work) or at least try to reproduce it as simply as possible, and describe how to do that. Without DEVT_FASCIST I belive this patch is a no-op. Stylistic/posixoid comments about the userland view of the <sys/*.h> files welcome now, from userland they now contain the end result. Next planned step: make all dev_t's refer to the same devsw[] which means convert BLK's to CHR's at the perimeter of the vnodes and other places where they enter the game (bootdev, mknod, sysctl).
1999-05-11 19:55:07 +00:00
udev_t nvp_rdev;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
struct vnode *ovp;
vop_t **ops;
dev_t dev;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Take VBLK devices further out of their missery. This should fix the panic I introduced in my previous commit on this topic.
2000-11-02 21:14:13 +00:00
if (nvp->v_type == VBLK)
return (nvp);
if (nvp->v_type != VCHR)
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
panic("addaliasu on non-special vnode");
Take VBLK devices further out of their missery. This should fix the panic I introduced in my previous commit on this topic.
2000-11-02 21:14:13 +00:00
dev = udev2dev(nvp_rdev, 0);
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
/*
* Check to see if we have a bdevvp vnode with no associated
* filesystem. If so, we want to associate the filesystem of
* the new newly instigated vnode with the bdevvp vnode and
* discard the newly created vnode rather than leaving the
* bdevvp vnode lying around with no associated filesystem.
*/
if (vfinddev(dev, nvp->v_type, &ovp) == 0 || ovp->v_data != NULL) {
addalias(nvp, dev);
return (nvp);
}
/*
* Discard unneeded vnode, but save its node specific data.
* Note that if there is a lock, it is carried over in the
* node specific data to the replacement vnode.
*/
vref(ovp);
ovp->v_data = nvp->v_data;
ovp->v_tag = nvp->v_tag;
nvp->v_data = NULL;
Properly lock new vnode. Reminded by: tegge
2001-01-31 04:54:23 +00:00
lockinit(&ovp->v_lock, PVFS, nvp->v_lock.lk_wmesg,
nvp->v_lock.lk_timo, nvp->v_lock.lk_flags & LK_EXTFLG_MASK);
Add a lock structure to vnode structure. Previously it was either allocated separately (nfs, cd9660 etc) or keept as a first element of structure referenced by v_data pointer(ffs). Such organization leads to known problems with stacked filesystems. From this point vop_no*lock*() functions maintain only interlock lock. vop_std*lock*() functions maintain built-in v_lock structure using lockmgr(). vop_sharedlock() is compatible with vop_stdunlock(), but maintains a shared lock on vnode. If filesystem wishes to export lockmgr compatible lock, it can put an address of this lock to v_vnlock field. This indicates that the upper filesystem can take advantage of it and use single lock structure for entire (or part) of stack of vnodes. This field shouldn't be examined or modified by VFS code except for initialization purposes. Reviewed in general by: mckusick
2000-09-25 15:24:04 +00:00
if (nvp->v_vnlock)
ovp->v_vnlock = &ovp->v_lock;
Properly lock new vnode. Reminded by: tegge
2001-01-31 04:54:23 +00:00
ops = ovp->v_op;
ovp->v_op = nvp->v_op;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if (VOP_ISLOCKED(nvp, curthread)) {
VOP_UNLOCK(nvp, 0, curthread);
vn_lock(ovp, LK_EXCLUSIVE | LK_RETRY, curthread);
Properly lock new vnode. Reminded by: tegge
2001-01-31 04:54:23 +00:00
}
nvp->v_op = ops;
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
insmntque(ovp, nvp->v_mount);
vrele(nvp);
vgone(nvp);
return (ovp);
Now a dev_t is a pointer to struct specinfo which is shared by all specdev vnodes referencing this device. Details: cdevsw->d_parms has been removed, the specinfo is available now (== dev_t) and the driver should modify it directly when applicable, and the only driver doing so, does so: vn.c. I am not sure the logic in checking for "<" was right before, and it looks even less so now. An intial pool of 50 struct specinfo are depleted during early boot, after that malloc had better work. It is likely that fewer than 50 would do. Hashing is done from udev_t to dev_t with a prime number remainder hash, experiments show no better hash available for decent cost (MD5 is only marginally better) The prime number used should not be close to a power of two, we use 83 for now. Add new checkalias2() to get around the loss of info from dev2udev() in bdevvp(); The aliased vnodes are hung on a list straight of the dev_t, and speclisth[SPECSZ] is unused. The sharing of struct specinfo means that the v_specnext moves into the vnode which grows by 4 bytes. Don't use a VBLK dev_t which doesn't make sense in MFS, now we hang a dummy cdevsw on B/Cmaj 253 so that things look sane. Storage overhead from all of this is O(50k). Bump __FreeBSD_version to 400009 The next step will add the stuff needed so device-drivers can start to hang things from struct specinfo
1999-07-20 09:47:55 +00:00
}
Divorce "dev_t" from the "major|minor" bitmap, which is now called udev_t in the kernel but still called dev_t in userland. Provide functions to manipulate both types: major() umajor() minor() uminor() makedev() umakedev() dev2udev() udev2dev() For now they're functions, they will become in-line functions after one of the next two steps in this process. Return major/minor/makedev to macro-hood for userland. Register a name in cdevsw[] for the "filedescriptor" driver. In the kernel the udev_t appears in places where we have the major/minor number combination, (ie: a potential device: we may not have the driver nor the device), like in inodes, vattr, cdevsw registration and so on, whereas the dev_t appears where we carry around a reference to a actual device. In the future the cdevsw and the aliased-from vnode will be hung directly from the dev_t, along with up to two softc pointers for the device driver and a few houskeeping bits. This will essentially replace the current "alias" check code (same buck, bigger bang). A little stunt has been provided to try to catch places where the wrong type is being used (dev_t vs udev_t), if you see something not working, #undef DEVT_FASCIST in kern/kern_conf.c and see if it makes a difference. If it does, please try to track it down (many hands make light work) or at least try to reproduce it as simply as possible, and describe how to do that. Without DEVT_FASCIST I belive this patch is a no-op. Stylistic/posixoid comments about the userland view of the <sys/*.h> files welcome now, from userland they now contain the end result. Next planned step: make all dev_t's refer to the same devsw[] which means convert BLK's to CHR's at the perimeter of the vnodes and other places where they enter the game (bootdev, mknod, sysctl).
1999-05-11 19:55:07 +00:00
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
/* This is a local helper function that do the same as addaliasu, but for a
* dev_t instead of an udev_t. */
Staticize addalias()
2000-09-22 11:54:48 +00:00
static void
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
addalias(nvp, dev)
struct vnode *nvp;
Now a dev_t is a pointer to struct specinfo which is shared by all specdev vnodes referencing this device. Details: cdevsw->d_parms has been removed, the specinfo is available now (== dev_t) and the driver should modify it directly when applicable, and the only driver doing so, does so: vn.c. I am not sure the logic in checking for "<" was right before, and it looks even less so now. An intial pool of 50 struct specinfo are depleted during early boot, after that malloc had better work. It is likely that fewer than 50 would do. Hashing is done from udev_t to dev_t with a prime number remainder hash, experiments show no better hash available for decent cost (MD5 is only marginally better) The prime number used should not be close to a power of two, we use 83 for now. Add new checkalias2() to get around the loss of info from dev2udev() in bdevvp(); The aliased vnodes are hung on a list straight of the dev_t, and speclisth[SPECSZ] is unused. The sharing of struct specinfo means that the v_specnext moves into the vnode which grows by 4 bytes. Don't use a VBLK dev_t which doesn't make sense in MFS, now we hang a dummy cdevsw on B/Cmaj 253 so that things look sane. Storage overhead from all of this is O(50k). Bump __FreeBSD_version to 400009 The next step will add the stuff needed so device-drivers can start to hang things from struct specinfo
1999-07-20 09:47:55 +00:00
dev_t dev;
{
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
Take VBLK devices further out of their missery. This should fix the panic I introduced in my previous commit on this topic.
2000-11-02 21:14:13 +00:00
KASSERT(nvp->v_type == VCHR, ("addalias on non-special vnode"));
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
nvp->v_rdev = dev;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&spechash_mtx);
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
SLIST_INSERT_HEAD(&dev->si_hlist, nvp, v_specnext);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&spechash_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Grab a particular vnode from the free list, increment its
Correct a couple of spelling errors in comments.
1999-07-12 15:02:51 +00:00
* reference count and lock it. The vnode lock bit is set if the
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* vnode is being eliminated in vgone. The process is awakened
* when the transition is completed, and an error returned to
* indicate that the vnode is no longer usable (possibly having
* been changed to a new file system type).
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vget(vp, flags, td)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
register struct vnode *vp;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
int flags;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
int error;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* If the vnode is in the process of being cleaned out for
* another use, we wait for the cleaning to finish and then
* return failure. Cleaning is determined by checking that
* the VXLOCK flag is set.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
if ((flags & LK_INTERLOCK) == 0)
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vp->v_interlock);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (vp->v_flag & VXLOCK) {
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if (vp->v_vxproc == curthread) {
Remove 'VXLOCK: interlock avoided' warnings. This can now occur in normal operation. The vgonel() code has always called vclean() but until we started proactively freeing vnodes it would never actually be called with a dirty vnode, so this situation did not occur prior to the vnlru() code. Now that we proactively free vnodes when kern.maxvnodes is hit, however, vclean() winds up with work to do and improperly generates the warnings. Reviewed by: peter Approved by: re (for MFC) MFC after: 1 day
2002-01-19 02:14:45 +00:00
#if 0
/* this can now occur in normal operation */
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
log(LOG_INFO, "VXLOCK interlock avoided\n");
Remove 'VXLOCK: interlock avoided' warnings. This can now occur in normal operation. The vgonel() code has always called vclean() but until we started proactively freeing vnodes it would never actually be called with a dirty vnode, so this situation did not occur prior to the vnlru() code. Now that we proactively free vnodes when kern.maxvnodes is hit, however, vclean() winds up with work to do and improperly generates the warnings. Reviewed by: peter Approved by: re (for MFC) MFC after: 1 day
2002-01-19 02:14:45 +00:00
#endif
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
} else {
vp->v_flag |= VXWANT;
Use msleep() instead of mtx_exit()/tsleep() so that we release the lock and go to sleep as an "atomic" operation.
2000-12-01 03:43:33 +00:00
msleep((caddr_t)vp, &vp->v_interlock, PINOD | PDROP,
"vget", 0);
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
return (ENOENT);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vp->v_usecount++;
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
if (VSHOULDBUSY(vp))
vbusy(vp);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (flags & LK_TYPE_MASK) {
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if ((error = vn_lock(vp, flags | LK_INTERLOCK, td)) != 0) {
Clean-up the vget mechanism by permanently attaching VM objects to vnodes, therefore vget doesn't need to do so anymore. Other minor improvements include the temp free vnode queue obeying the VAGE flag and a printf that warns of to-be-removed code being executed.
1998-02-23 06:59:52 +00:00
/*
* must expand vrele here because we do not want
* to call VOP_INACTIVE if the reference count
* drops back to zero since it was never really
* active. We must remove it from the free list
* before sleeping so that multiple processes do
* not try to recycle it.
*/
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vp->v_interlock);
Clean-up the vget mechanism by permanently attaching VM objects to vnodes, therefore vget doesn't need to do so anymore. Other minor improvements include the temp free vnode queue obeying the VAGE flag and a printf that warns of to-be-removed code being executed.
1998-02-23 06:59:52 +00:00
vp->v_usecount--;
if (VSHOULDFREE(vp))
vfree(vp);
Add vlruvp() routine - implements LRU operation for vnode recycling. We calculate a trigger point that both guarentees we will find a sufficient number of vnodes to recycle and prevents us from recycling vnodes with lots of resident pages. This particular section of code is designed to recycle vnodes, not do unnecessary frees of cached VM pages.
2002-01-10 18:31:53 +00:00
else
vlruvp(vp);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vp->v_interlock);
Clean-up the vget mechanism by permanently attaching VM objects to vnodes, therefore vget doesn't need to do so anymore. Other minor improvements include the temp free vnode queue obeying the VAGE flag and a printf that warns of to-be-removed code being executed.
1998-02-23 06:59:52 +00:00
}
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
return (error);
Even though this looks like it, this is not a complex code change. The interface into the "VMIO" system has changed to be more consistant and robust. Essentially, it is now no longer necessary to call vn_open to get merged VM/Buffer cache operation, and exceptional conditions such as merged operation of VBLK devices is simpler and more correct. This code corrects a potentially large set of problems including the problems with ktrace output and loaded systems, file create/deletes, etc. Most of the changes to NFS are cosmetic and name changes, eliminating a layer of subroutine calls. The direct calls to vput/vrele have been re-instituted for better cross platform compatibility. Reviewed by: davidg
1996-08-21 21:56:23 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vp->v_interlock);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
return (0);
}
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
* Increase the reference count of a vnode.
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
*/
Add the vnode interlock back around vref.
1997-12-29 16:54:03 +00:00
void
vref(struct vnode *vp)
{
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vp->v_interlock);
Add the vnode interlock back around vref.
1997-12-29 16:54:03 +00:00
vp->v_usecount++;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vp->v_interlock);
Add the vnode interlock back around vref.
1997-12-29 16:54:03 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
* Vnode put/release.
* If count drops to zero, call inactive routine and return to freelist.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
vrele(vp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct vnode *vp;
{
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td = curthread; /* XXX */
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
KNFize, by bde.
1999-01-10 01:58:29 +00:00
KASSERT(vp != NULL, ("vrele: null vp"));
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vp->v_interlock);
Even though this looks like it, this is not a complex code change. The interface into the "VMIO" system has changed to be more consistant and robust. Essentially, it is now no longer necessary to call vn_open to get merged VM/Buffer cache operation, and exceptional conditions such as merged operation of VBLK devices is simpler and more correct. This code corrects a potentially large set of problems including the problems with ktrace output and loaded systems, file create/deletes, etc. Most of the changes to NFS are cosmetic and name changes, eliminating a layer of subroutine calls. The direct calls to vput/vrele have been re-instituted for better cross platform compatibility. Reviewed by: davidg
1996-08-21 21:56:23 +00:00
In vrele() and vput(), avoid triggering the confusing "missed vn_close" KASSERT when vp->v_usecount is zero or negative. In this case, the "v*: negative ref cnt" panic that follows is much more appropriate. Reviewed by: mckusick
2001-05-11 20:42:41 +00:00
/* Skip this v_writecount check if we're going to panic below. */
KASSERT(vp->v_writecount < vp->v_usecount || vp->v_usecount < 1,
("vrele: missed vn_close"));
Move KASSERTs which checks value of v_usecount after vnode locking, so it will not produce wrong alarms.
2000-10-02 09:57:06 +00:00
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
if (vp->v_usecount > 1) {
Correct vget by removing a window where a vnode can potentially go away.
1996-09-28 03:36:07 +00:00
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
vp->v_usecount--;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vp->v_interlock);
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
return;
}
if (vp->v_usecount == 1) {
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
vp->v_usecount--;
In the routines vrele() and vput(), we must lock the vnode and call VOP_INACTIVE before placing the vnode back on the free list. Otherwise there is a race condition on SMP machines between getnewvnode() locking the vnode to reclaim it and vrele() locking the vnode to inactivate it. This window of vulnerability becomes exaggerated in the presence of filesystems that have been suspended as the inactive routine may need to temporarily release the lock on the vnode to avoid deadlock with the syncer process.
2002-02-02 01:49:18 +00:00
/*
* We must call VOP_INACTIVE with the node locked.
* If we are doing a vput, the node is already locked,
* but, in the case of vrele, we must explicitly lock
* the vnode before calling VOP_INACTIVE.
*/
if (vn_lock(vp, LK_EXCLUSIVE | LK_INTERLOCK, td) == 0)
VOP_INACTIVE(vp, td);
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
if (VSHOULDFREE(vp))
vfree(vp);
Add vlruvp() routine - implements LRU operation for vnode recycling. We calculate a trigger point that both guarentees we will find a sufficient number of vnodes to recycle and prevents us from recycling vnodes with lots of resident pages. This particular section of code is designed to recycle vnodes, not do unnecessary frees of cached VM pages.
2002-01-10 18:31:53 +00:00
else
vlruvp(vp);
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
} else {
#ifdef DIAGNOSTIC
vprint("vrele: negative ref count", vp);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vp->v_interlock);
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
#endif
panic("vrele: negative ref cnt");
Even though this looks like it, this is not a complex code change. The interface into the "VMIO" system has changed to be more consistant and robust. Essentially, it is now no longer necessary to call vn_open to get merged VM/Buffer cache operation, and exceptional conditions such as merged operation of VBLK devices is simpler and more correct. This code corrects a potentially large set of problems including the problems with ktrace output and loaded systems, file create/deletes, etc. Most of the changes to NFS are cosmetic and name changes, eliminating a layer of subroutine calls. The direct calls to vput/vrele have been re-instituted for better cross platform compatibility. Reviewed by: davidg
1996-08-21 21:56:23 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
* Release an already locked vnode. This give the same effects as
* unlock+vrele(), but takes less time and avoids releasing and
* re-aquiring the lock (as vrele() aquires the lock internally.)
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
*/
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
void
vput(vp)
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
struct vnode *vp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td = curthread; /* XXX */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
With Alfred's permission, remove vm_mtx in favor of a fine-grained approach (this commit is just the first stage). Also add various GIANT_ macros to formalize the removal of Giant, making it easy to test in a more piecemeal fashion. These macros will allow us to test fine-grained locks to a degree before removing Giant, and also after, and to remove Giant in a piecemeal fashion via sysctl's on those subsystems which the authors believe can operate without Giant.
2001-07-04 16:20:28 +00:00
GIANT_REQUIRED;
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
KASSERT(vp != NULL, ("vput: null vp"));
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vp->v_interlock);
In vrele() and vput(), avoid triggering the confusing "missed vn_close" KASSERT when vp->v_usecount is zero or negative. In this case, the "v*: negative ref cnt" panic that follows is much more appropriate. Reviewed by: mckusick
2001-05-11 20:42:41 +00:00
/* Skip this v_writecount check if we're going to panic below. */
KASSERT(vp->v_writecount < vp->v_usecount || vp->v_usecount < 1,
("vput: missed vn_close"));
Move KASSERTs which checks value of v_usecount after vnode locking, so it will not produce wrong alarms.
2000-10-02 09:57:06 +00:00
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
if (vp->v_usecount > 1) {
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
vp->v_usecount--;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
VOP_UNLOCK(vp, LK_INTERLOCK, td);
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
return;
}
Even though this looks like it, this is not a complex code change. The interface into the "VMIO" system has changed to be more consistant and robust. Essentially, it is now no longer necessary to call vn_open to get merged VM/Buffer cache operation, and exceptional conditions such as merged operation of VBLK devices is simpler and more correct. This code corrects a potentially large set of problems including the problems with ktrace output and loaded systems, file create/deletes, etc. Most of the changes to NFS are cosmetic and name changes, eliminating a layer of subroutine calls. The direct calls to vput/vrele have been re-instituted for better cross platform compatibility. Reviewed by: davidg
1996-08-21 21:56:23 +00:00
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
if (vp->v_usecount == 1) {
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
vp->v_usecount--;
In the routines vrele() and vput(), we must lock the vnode and call VOP_INACTIVE before placing the vnode back on the free list. Otherwise there is a race condition on SMP machines between getnewvnode() locking the vnode to reclaim it and vrele() locking the vnode to inactivate it. This window of vulnerability becomes exaggerated in the presence of filesystems that have been suspended as the inactive routine may need to temporarily release the lock on the vnode to avoid deadlock with the syncer process.
2002-02-02 01:49:18 +00:00
/*
* We must call VOP_INACTIVE with the node locked.
* If we are doing a vput, the node is already locked,
* so we just need to release the vnode mutex.
*/
mtx_unlock(&vp->v_interlock);
VOP_INACTIVE(vp, td);
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
if (VSHOULDFREE(vp))
vfree(vp);
Add vlruvp() routine - implements LRU operation for vnode recycling. We calculate a trigger point that both guarentees we will find a sufficient number of vnodes to recycle and prevents us from recycling vnodes with lots of resident pages. This particular section of code is designed to recycle vnodes, not do unnecessary frees of cached VM pages.
2002-01-10 18:31:53 +00:00
else
vlruvp(vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
} else {
#ifdef DIAGNOSTIC
vprint("vput: negative ref count", vp);
#endif
panic("vput: negative ref cnt");
}
Fix the simple_lock problem with the physical I/O buffer code, and also fix the missing simple_unlock in vrele, and improve vrele/vput by merging them into one routine. BDE pointed these problems out.
1997-02-27 02:57:03 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
* Somebody doesn't want the vnode recycled.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
vhold(vp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
register struct vnode *vp;
{
Don't misuse vnode interlocks in routines that can be called from interrupts. PR: 5893
1998-03-14 02:55:01 +00:00
int s;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Don't misuse vnode interlocks in routines that can be called from interrupts. PR: 5893
1998-03-14 02:55:01 +00:00
s = splbio();
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vp->v_holdcnt++;
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
if (VSHOULDBUSY(vp))
vbusy(vp);
Don't misuse vnode interlocks in routines that can be called from interrupts. PR: 5893
1998-03-14 02:55:01 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
* Note that there is one less who cares about this vnode. vdrop() is the
* opposite of vhold().
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
vdrop(vp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
register struct vnode *vp;
{
Don't misuse vnode interlocks in routines that can be called from interrupts. PR: 5893
1998-03-14 02:55:01 +00:00
int s;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Don't misuse vnode interlocks in routines that can be called from interrupts. PR: 5893
1998-03-14 02:55:01 +00:00
s = splbio();
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (vp->v_holdcnt <= 0)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
panic("vdrop: holdcnt");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vp->v_holdcnt--;
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
if (VSHOULDFREE(vp))
vfree(vp);
Add vlruvp() routine - implements LRU operation for vnode recycling. We calculate a trigger point that both guarentees we will find a sufficient number of vnodes to recycle and prevents us from recycling vnodes with lots of resident pages. This particular section of code is designed to recycle vnodes, not do unnecessary frees of cached VM pages.
2002-01-10 18:31:53 +00:00
else
vlruvp(vp);
Don't misuse vnode interlocks in routines that can be called from interrupts. PR: 5893
1998-03-14 02:55:01 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Remove any vnodes in the vnode table belonging to mount point mp.
*
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
* If FORCECLOSE is not specified, there should not be any active ones,
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* return error if any are found (nb: this is a user error, not a
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
* system error). If FORCECLOSE is specified, detach any active vnodes
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* that are found.
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
*
* If WRITECLOSE is set, only flush out regular file vnodes open for
* writing.
*
* SKIPSYSTEM causes any vnodes marked VSYSTEM to be skipped.
*
* `rootrefs' specifies the base reference count for the root vnode
* of this filesystem. The root vnode is considered busy if its
* v_usecount exceeds this value. On a successful return, vflush()
* will call vrele() on the root vnode exactly rootrefs times.
* If the SKIPSYSTEM or WRITECLOSE flags are specified, rootrefs must
* be zero.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
#ifdef DIAGNOSTIC
Staticize. Unstaticize a function in scsi/scsi_base that was used, with an undocumented option. My last count on the LINT kernel shows: Total symbols: 3647 unref symbols: 463 undef symbols: 4 1 ref symbols: 1751 2 ref symbols: 485 Approaching the pain threshold now.
1995-12-17 21:23:44 +00:00
static int busyprt = 0; /* print out busy vnodes */
Use OID_AUTO instead of magic number for the Lite2 sysctl debug.busyprt. Removed declaration of vfs_unmountroot() again. Staticized vgonel().
1997-04-01 13:05:34 +00:00
SYSCTL_INT(_debug, OID_AUTO, busyprt, CTLFLAG_RW, &busyprt, 0, "");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#endif
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
vflush(mp, rootrefs, flags)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct mount *mp;
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
int rootrefs;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int flags;
{
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td = curthread; /* XXX */
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
struct vnode *vp, *nvp, *rootvp = NULL;
When downgrading a filesystem from read-write to read-only, operations involving file removal or file update were not always being fully committed to disk. The result was lost files or corrupted file data. This change ensures that the filesystem is properly synced to disk before the filesystem is down-graded. This delta also fixes a long standing bug in which a file open for reading has been unlinked. When the last open reference to the file is closed, the inode is reclaimed by the filesystem. Previously, if the filesystem had been down-graded to read-only, the inode could not be reclaimed, and thus was lost and had to be later recovered by fsck. With this change, such files are found at the time of the down-grade. Normally they will result in the filesystem down-grade failing with `device busy'. If a forcible down-grade is done, then the affected files will be revoked causing the inode to be released and the open file descriptors to begin failing on attempts to read. Submitted by: "Sam Leffler" <sam@errno.com>
2002-01-15 07:17:12 +00:00
struct vattr vattr;
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
int busy = 0, error;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
if (rootrefs > 0) {
KASSERT((flags & (SKIPSYSTEM | WRITECLOSE)) == 0,
("vflush: bad args"));
/*
* Get the filesystem root vnode. We can vput() it
* immediately, since with rootrefs > 0, it won't go away.
*/
if ((error = VFS_ROOT(mp, &rootvp)) != 0)
return (error);
vput(rootvp);
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mntvnode_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
loop:
Change the vnode list under the mount point from a LIST to a TAILQ in preparation for an implementation of limiting code for kern.maxvnodes. MFC after: 3 days
2001-10-23 01:21:29 +00:00
for (vp = TAILQ_FIRST(&mp->mnt_nvnodelist); vp; vp = nvp) {
Added a comment.
1995-03-11 22:29:07 +00:00
/*
* Make sure this vnode wasn't reclaimed in getnewvnode().
* Start over if it has (it won't be on the list anymore).
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (vp->v_mount != mp)
goto loop;
Change the vnode list under the mount point from a LIST to a TAILQ in preparation for an implementation of limiting code for kern.maxvnodes. MFC after: 3 days
2001-10-23 01:21:29 +00:00
nvp = TAILQ_NEXT(vp, v_nmntvnodes);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
- Fix a mntvnode and vnode interlock reversal. - Protect the mnt_vnode list with the mntvnode lock.
2001-06-28 04:05:54 +00:00
mtx_unlock(&mntvnode_mtx);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vp->v_interlock);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Skip over a vnodes marked VSYSTEM.
*/
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if ((flags & SKIPSYSTEM) && (vp->v_flag & VSYSTEM)) {
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vp->v_interlock);
- Fix a mntvnode and vnode interlock reversal. - Protect the mnt_vnode list with the mntvnode lock.
2001-06-28 04:05:54 +00:00
mtx_lock(&mntvnode_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
continue;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
When downgrading a filesystem from read-write to read-only, operations involving file removal or file update were not always being fully committed to disk. The result was lost files or corrupted file data. This change ensures that the filesystem is properly synced to disk before the filesystem is down-graded. This delta also fixes a long standing bug in which a file open for reading has been unlinked. When the last open reference to the file is closed, the inode is reclaimed by the filesystem. Previously, if the filesystem had been down-graded to read-only, the inode could not be reclaimed, and thus was lost and had to be later recovered by fsck. With this change, such files are found at the time of the down-grade. Normally they will result in the filesystem down-grade failing with `device busy'. If a forcible down-grade is done, then the affected files will be revoked causing the inode to be released and the open file descriptors to begin failing on attempts to read. Submitted by: "Sam Leffler" <sam@errno.com>
2002-01-15 07:17:12 +00:00
* If WRITECLOSE is set, flush out unlinked but still open
* files (even if open only for reading) and regular file
* vnodes open for writing.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
if ((flags & WRITECLOSE) &&
When downgrading a filesystem from read-write to read-only, operations involving file removal or file update were not always being fully committed to disk. The result was lost files or corrupted file data. This change ensures that the filesystem is properly synced to disk before the filesystem is down-graded. This delta also fixes a long standing bug in which a file open for reading has been unlinked. When the last open reference to the file is closed, the inode is reclaimed by the filesystem. Previously, if the filesystem had been down-graded to read-only, the inode could not be reclaimed, and thus was lost and had to be later recovered by fsck. With this change, such files are found at the time of the down-grade. Normally they will result in the filesystem down-grade failing with `device busy'. If a forcible down-grade is done, then the affected files will be revoked causing the inode to be released and the open file descriptors to begin failing on attempts to read. Submitted by: "Sam Leffler" <sam@errno.com>
2002-01-15 07:17:12 +00:00
(vp->v_type == VNON ||
Three p_ucred -> td_ucred's missed in jhb's earlier pass; all appear to be safe.
2002-03-05 19:45:45 +00:00
(VOP_GETATTR(vp, &vattr, td->td_ucred, td) == 0 &&
When downgrading a filesystem from read-write to read-only, operations involving file removal or file update were not always being fully committed to disk. The result was lost files or corrupted file data. This change ensures that the filesystem is properly synced to disk before the filesystem is down-graded. This delta also fixes a long standing bug in which a file open for reading has been unlinked. When the last open reference to the file is closed, the inode is reclaimed by the filesystem. Previously, if the filesystem had been down-graded to read-only, the inode could not be reclaimed, and thus was lost and had to be later recovered by fsck. With this change, such files are found at the time of the down-grade. Normally they will result in the filesystem down-grade failing with `device busy'. If a forcible down-grade is done, then the affected files will be revoked causing the inode to be released and the open file descriptors to begin failing on attempts to read. Submitted by: "Sam Leffler" <sam@errno.com>
2002-01-15 07:17:12 +00:00
vattr.va_nlink > 0)) &&
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
(vp->v_writecount == 0 || vp->v_type != VREG)) {
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vp->v_interlock);
- Fix a mntvnode and vnode interlock reversal. - Protect the mnt_vnode list with the mntvnode lock.
2001-06-28 04:05:54 +00:00
mtx_lock(&mntvnode_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
continue;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
Even though this looks like it, this is not a complex code change. The interface into the "VMIO" system has changed to be more consistant and robust. Essentially, it is now no longer necessary to call vn_open to get merged VM/Buffer cache operation, and exceptional conditions such as merged operation of VBLK devices is simpler and more correct. This code corrects a potentially large set of problems including the problems with ktrace output and loaded systems, file create/deletes, etc. Most of the changes to NFS are cosmetic and name changes, eliminating a layer of subroutine calls. The direct calls to vput/vrele have been re-instituted for better cross platform compatibility. Reviewed by: davidg
1996-08-21 21:56:23 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
* With v_usecount == 0, all we need to do is clear out the
* vnode data structures and we are done.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
if (vp->v_usecount == 0) {
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vgonel(vp, td);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mntvnode_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
continue;
}
Clean up the rundown of the object backing a vnode. This should fix NFS problems associated with forcible dismounts.
1996-10-17 02:49:35 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
* If FORCECLOSE is set, forcibly close the vnode. For block
* or character devices, revert to an anonymous device. For
* all other files, just kill them.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
if (flags & FORCECLOSE) {
Take VBLK devices further out of their missery. This should fix the panic I introduced in my previous commit on this topic.
2000-11-02 21:14:13 +00:00
if (vp->v_type != VCHR) {
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vgonel(vp, td);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
} else {
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vclean(vp, 0, td);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vp->v_op = spec_vnodeop_p;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
insmntque(vp, (struct mount *) 0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mntvnode_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
continue;
}
#ifdef DIAGNOSTIC
if (busyprt)
vprint("vflush: busy vnode", vp);
#endif
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vp->v_interlock);
- Fix a mntvnode and vnode interlock reversal. - Protect the mnt_vnode list with the mntvnode lock.
2001-06-28 04:05:54 +00:00
mtx_lock(&mntvnode_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
busy++;
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mntvnode_mtx);
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
if (rootrefs > 0 && (flags & FORCECLOSE) == 0) {
/*
* If just the root vnode is busy, and if its refcount
* is equal to `rootrefs', then go ahead and kill it.
*/
mtx_lock(&rootvp->v_interlock);
KASSERT(busy > 0, ("vflush: not busy"));
KASSERT(rootvp->v_usecount >= rootrefs, ("vflush: rootrefs"));
if (busy == 1 && rootvp->v_usecount == rootrefs) {
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vgonel(rootvp, td);
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
busy = 0;
} else
mtx_unlock(&rootvp->v_interlock);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (busy)
return (EBUSY);
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
for (; rootrefs > 0; rootrefs--)
vrele(rootvp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (0);
}
Add vlruvp() routine - implements LRU operation for vnode recycling. We calculate a trigger point that both guarentees we will find a sufficient number of vnodes to recycle and prevents us from recycling vnodes with lots of resident pages. This particular section of code is designed to recycle vnodes, not do unnecessary frees of cached VM pages.
2002-01-10 18:31:53 +00:00
/*
* This moves a now (likely recyclable) vnode to the end of the
* mountlist. XXX However, it is temporarily disabled until we
* can clean up ffs_sync() and friends, which have loop restart
* conditions which this code causes to operate O(N^2).
*/
static void
vlruvp(struct vnode *vp)
{
#if 0
struct mount *mp;
if ((mp = vp->v_mount) != NULL) {
mtx_lock(&mntvnode_mtx);
TAILQ_REMOVE(&mp->mnt_nvnodelist, vp, v_nmntvnodes);
TAILQ_INSERT_TAIL(&mp->mnt_nvnodelist, vp, v_nmntvnodes);
mtx_unlock(&mntvnode_mtx);
}
#endif
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Disassociate the underlying file system from a vnode.
*/
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
static void
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vclean(vp, flags, td)
Fixed gratuitous ANSIisms.
1997-09-16 11:44:05 +00:00
struct vnode *vp;
int flags;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
int active;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
* Check to see if the vnode is in use. If so we have to reference it
* before we clean it out so that its count cannot fall to zero and
* generate a race against ourselves to recycle it.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
While in the real world, I had a bad case of being swapped out for a lot of cycles. While waiting there I added a lot of the extra ()'s I have, (I have never used LISP to any extent). So I compiled the kernel with -Wall and shut up a lot of "suggest you add ()'s", removed a bunch of unused var's and added a couple of declarations here and there. Having a lap-top is highly recommended. My kernel still runs, yell at me if you kernel breaks.
1994-09-25 19:34:02 +00:00
if ((active = vp->v_usecount))
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
vp->v_usecount++;
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
* Prevent the vnode from being recycled or brought into use while we
* clean it out.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
if (vp->v_flag & VXLOCK)
panic("vclean: deadlock");
vp->v_flag |= VXLOCK;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vp->v_vxproc = curthread;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* Even if the count is zero, the VOP_INACTIVE routine may still
* have the object locked while it cleans it out. The VOP_LOCK
* ensures that the VOP_INACTIVE routine is done with its work.
* For active vnodes, it ensures that no other activity can
* occur while the underlying object is being cleaned out.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
VOP_LOCK(vp, LK_DRAIN | LK_INTERLOCK, td);
Remove a window during running down a file vnode. Also, the OBJ_DEAD flag wasn't being respected during vref(), et. al. Note that this isn't the eventual fix for the locking problem. Fine grained SMP in the VM and VFS code will require (lots) more work.
1997-06-22 03:00:24 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* Clean out any buffers associated with the vnode.
If a buffer flush fails when trying to reclaim a vnode, it is too late to save the vnode, so just toss any remaining unwritten buffers rather than leaving them lying around to make trouble in the future.
2000-07-04 03:23:29 +00:00
* If the flush fails, just toss the buffers.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
If a buffer flush fails when trying to reclaim a vnode, it is too late to save the vnode, so just toss any remaining unwritten buffers rather than leaving them lying around to make trouble in the future.
2000-07-04 03:23:29 +00:00
if (flags & DOCLOSE) {
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (TAILQ_FIRST(&vp->v_dirtyblkhd) != NULL)
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
(void) vn_write_suspend_wait(vp, NULL, V_WAIT);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if (vinvalbuf(vp, V_SAVE, NOCRED, td, 0, 0) != 0)
vinvalbuf(vp, 0, NOCRED, td, 0, 0);
If a buffer flush fails when trying to reclaim a vnode, it is too late to save the vnode, so just toss any remaining unwritten buffers rather than leaving them lying around to make trouble in the future.
2000-07-04 03:23:29 +00:00
}
Add three new VOPs: VOP_CREATEVOBJECT, VOP_DESTROYVOBJECT and VOP_GETVOBJECT. They will be used by nullfs and other stacked filesystems to support full cache coherency. Reviewed in general by: mckusick, dillon
2000-09-12 09:49:08 +00:00
VOP_DESTROYVOBJECT(vp);
Remove a window during running down a file vnode. Also, the OBJ_DEAD flag wasn't being respected during vref(), et. al. Note that this isn't the eventual fix for the locking problem. Fine grained SMP in the VM and VFS code will require (lots) more work.
1997-06-22 03:00:24 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* If purging an active vnode, it must be closed and
* deactivated before being reclaimed. Note that the
* VOP_INACTIVE will unlock the vnode.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
if (active) {
if (flags & DOCLOSE)
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
VOP_CLOSE(vp, FNONBLOCK, NOCRED, td);
VOP_INACTIVE(vp, td);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
} else {
/*
* Any other processes trying to obtain this lock must first
* wait for VXLOCK to clear, then call the new lock operation.
*/
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
VOP_UNLOCK(vp, 0, td);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Reclaim the vnode.
*/
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if (VOP_RECLAIM(vp, td))
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
panic("vclean: cannot reclaim");
Clean-up the vget mechanism by permanently attaching VM objects to vnodes, therefore vget doesn't need to do so anymore. Other minor improvements include the temp free vnode queue obeying the VAGE flag and a printf that warns of to-be-removed code being executed.
1998-02-23 06:59:52 +00:00
This patch fixes a locking bug that can result in deadlock if the codepath is followed. From the PR: vclean calls vrele leading to deadlock (if usecount > 0) vclean() calls vrele() if v_usecount of the node was higher than one. But before calling it, it sets the VXLOCK flag, which will make vn_lock called from vrele dead-lock. PR: kern/15117 Submitted by: Assar Westerlund <assar@stacken.kth.se> Reviewed by: rwatson Obtained from: NetBSD
2000-01-29 15:22:58 +00:00
if (active) {
/*
* Inline copy of vrele() since VOP_INACTIVE
* has already been called.
*/
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vp->v_interlock);
This patch fixes a locking bug that can result in deadlock if the codepath is followed. From the PR: vclean calls vrele leading to deadlock (if usecount > 0) vclean() calls vrele() if v_usecount of the node was higher than one. But before calling it, it sets the VXLOCK flag, which will make vn_lock called from vrele dead-lock. PR: kern/15117 Submitted by: Assar Westerlund <assar@stacken.kth.se> Reviewed by: rwatson Obtained from: NetBSD
2000-01-29 15:22:58 +00:00
if (--vp->v_usecount <= 0) {
#ifdef DIAGNOSTIC
if (vp->v_usecount < 0 || vp->v_writecount != 0) {
vprint("vclean: bad ref count", vp);
panic("vclean: ref cnt");
}
#endif
vfree(vp);
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vp->v_interlock);
This patch fixes a locking bug that can result in deadlock if the codepath is followed. From the PR: vclean calls vrele leading to deadlock (if usecount > 0) vclean() calls vrele() if v_usecount of the node was higher than one. But before calling it, it sets the VXLOCK flag, which will make vn_lock called from vrele dead-lock. PR: kern/15117 Submitted by: Assar Westerlund <assar@stacken.kth.se> Reviewed by: rwatson Obtained from: NetBSD
2000-01-29 15:22:58 +00:00
}
Clean-up the vget mechanism by permanently attaching VM objects to vnodes, therefore vget doesn't need to do so anymore. Other minor improvements include the temp free vnode queue obeying the VAGE flag and a printf that warns of to-be-removed code being executed.
1998-02-23 06:59:52 +00:00
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
cache_purge(vp);
Do not call lockdestroy() for v_vnlock, which may point to a lock in a deeper vfs stacking layer. Submitted by: bp
2000-10-06 08:04:48 +00:00
vp->v_vnlock = NULL;
Convert lockmgr locks from using simple locks to using mutexes. Add lockdestroy() and appropriate invocations, which corresponds to lockinit() and must be called to clean up after a lockmgr lock is no longer needed.
2000-10-04 01:29:17 +00:00
lockdestroy(&vp->v_lock);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Clean-up the vget mechanism by permanently attaching VM objects to vnodes, therefore vget doesn't need to do so anymore. Other minor improvements include the temp free vnode queue obeying the VAGE flag and a printf that warns of to-be-removed code being executed.
1998-02-23 06:59:52 +00:00
if (VSHOULDFREE(vp))
vfree(vp);
Add dev_t freeing code. Controlled by sysctl debug.free_devt, default is off.
1999-08-29 09:09:12 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Done with purge, notify sleepers of the grim news.
*/
vp->v_op = dead_vnodeop_p;
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
if (vp->v_pollinfo != NULL)
vn_pollgone(vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vp->v_tag = VT_NON;
vp->v_flag &= ~VXLOCK;
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
vp->v_vxproc = NULL;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (vp->v_flag & VXWANT) {
vp->v_flag &= ~VXWANT;
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
wakeup((caddr_t) vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
}
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* Eliminate all activity associated with the requested vnode
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* and with all vnodes aliased to the requested vnode.
*/
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
int
vop_revoke(ap)
struct vop_revoke_args /* {
struct vnode *a_vp;
int a_flags;
} */ *ap;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
struct vnode *vp, *vq;
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
dev_t dev;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
KASSERT((ap->a_flags & REVOKEALL) != 0, ("vop_revoke"));
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
vp = ap->a_vp;
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
/*
* If a vgone (or vclean) is already in progress,
* wait until it is done and return.
*/
if (vp->v_flag & VXLOCK) {
vp->v_flag |= VXWANT;
Use msleep() instead of mtx_exit()/tsleep() so that we release the lock and go to sleep as an "atomic" operation.
2000-12-01 03:43:33 +00:00
msleep((caddr_t)vp, &vp->v_interlock, PINOD | PDROP,
"vop_revokeall", 0);
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
return (0);
}
dev = vp->v_rdev;
for (;;) {
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&spechash_mtx);
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
vq = SLIST_FIRST(&dev->si_hlist);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&spechash_mtx);
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
if (!vq)
break;
vgone(vq);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
return (0);
}
/*
* Recycle an unused vnode to the front of the free list.
* Release the passed interlock if the vnode will be recycled.
*/
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vrecycle(vp, inter_lkp, td)
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
struct vnode *vp;
Convert all simplelocks to mutexes and remove the simplelock implementations.
2001-01-24 12:35:55 +00:00
struct mtx *inter_lkp;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
{
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vp->v_interlock);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (vp->v_usecount == 0) {
if (inter_lkp) {
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(inter_lkp);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vgonel(vp, td);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
return (1);
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vp->v_interlock);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
return (0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Eliminate all activity associated with a vnode
* in preparation for reuse.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
vgone(vp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
register struct vnode *vp;
{
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td = curthread; /* XXX */
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vp->v_interlock);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vgonel(vp, td);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
/*
* vgone, with the vp interlock held.
*/
Remove static qualifier from vgonel, as it is needed by the Arla folk outside of vfs_subr.c. Submitted by: Assar Westerlund <assar@sics.se> Reviewed by: rwatson Approved by: jkh
2000-02-02 07:07:17 +00:00
void
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vgonel(vp, td)
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
struct vnode *vp;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
{
Fix some vnode management problems, and better mgmt of vnode free list. Fix the UIO optimization code. Fix an assumption in vm_map_insert regarding allocation of swap pagers. Fix an spl problem in the collapse handling in vm_object_deallocate. When pages are freed from vnode objects, and the criteria for putting the associated vnode onto the free list is reached, either put the vnode onto the list, or put it onto an interrupt safe version of the list, for further transfer onto the actual free list. Some minor syntax changes changing pre-decs, pre-incs to post versions. Remove a bogus timeout (that I added for debugging) from vn_lock. PHK will likely still have problems with the vnode list management, and so do I, but it is better than it was.
1998-01-12 01:46:33 +00:00
int s;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* If a vgone (or vclean) is already in progress,
* wait until it is done and return.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
if (vp->v_flag & VXLOCK) {
vp->v_flag |= VXWANT;
Use msleep() instead of mtx_exit()/tsleep() so that we release the lock and go to sleep as an "atomic" operation.
2000-12-01 03:43:33 +00:00
msleep((caddr_t)vp, &vp->v_interlock, PINOD | PDROP,
"vgone", 0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return;
}
Clean up the rundown of the object backing a vnode. This should fix NFS problems associated with forcible dismounts.
1996-10-17 02:49:35 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Clean out the filesystem specific data.
*/
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vclean(vp, DOCLOSE, td);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vp->v_interlock);
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Delete from old mount point vnode list, if on one.
*/
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (vp->v_mount != NULL)
insmntque(vp, (struct mount *)0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* If special device, remove it from special device alias list
* if it is on one.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Take VBLK devices further out of their missery. This should fix the panic I introduced in my previous commit on this topic.
2000-11-02 21:14:13 +00:00
if (vp->v_type == VCHR && vp->v_rdev != NULL && vp->v_rdev != NODEV) {
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&spechash_mtx);
Rename lminor() to dev2unit(). This function gives a linear unit number which hides the 'hole' in the minor bits. Introduce unit2minor() to do the reverse operation. Fix some some make_dev() calls which didn't use UID_* or GID_* macros. Kill the v_hashchain alias macro, it hides the real relationship. Introduce experimental SI_CHEAPCLONE flag set it on cloned bpfs.
2000-09-19 10:28:44 +00:00
SLIST_REMOVE(&vp->v_rdev->si_hlist, vp, vnode, v_specnext);
Add dev_t freeing code. Controlled by sysctl debug.free_devt, default is off.
1999-08-29 09:09:12 +00:00
freedev(vp->v_rdev);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&spechash_mtx);
s/v_specinfo/v_rdev/
1999-08-13 10:10:12 +00:00
vp->v_rdev = NULL;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* If it is on the freelist and not already at the head,
Simplify and rationalise the management of the vnode free list (preparing the code to add snapshots).
2000-07-04 04:32:40 +00:00
* move it to the head of the list. The test of the
* VDOOMED flag and the reference count of zero is because
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* it will be removed from the free list by getnewvnode,
* but will not have its reference count incremented until
* after calling vgone. If the reference count were
* incremented first, vgone would (incorrectly) try to
* close the previous instance of the underlying object.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
if (vp->v_usecount == 0 && !(vp->v_flag & VDOOMED)) {
Fix some vnode management problems, and better mgmt of vnode free list. Fix the UIO optimization code. Fix an assumption in vm_map_insert regarding allocation of swap pagers. Fix an spl problem in the collapse handling in vm_object_deallocate. When pages are freed from vnode objects, and the criteria for putting the associated vnode onto the free list is reached, either put the vnode onto the list, or put it onto an interrupt safe version of the list, for further transfer onto the actual free list. Some minor syntax changes changing pre-decs, pre-incs to post versions. Remove a bogus timeout (that I added for debugging) from vn_lock. PHK will likely still have problems with the vnode list management, and so do I, but it is better than it was.
1998-01-12 01:46:33 +00:00
s = splbio();
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vnode_free_list_mtx);
Simplify and rationalise the management of the vnode free list (preparing the code to add snapshots).
2000-07-04 04:32:40 +00:00
if (vp->v_flag & VFREE)
Fix some vnode management problems, and better mgmt of vnode free list. Fix the UIO optimization code. Fix an assumption in vm_map_insert regarding allocation of swap pagers. Fix an spl problem in the collapse handling in vm_object_deallocate. When pages are freed from vnode objects, and the criteria for putting the associated vnode onto the free list is reached, either put the vnode onto the list, or put it onto an interrupt safe version of the list, for further transfer onto the actual free list. Some minor syntax changes changing pre-decs, pre-incs to post versions. Remove a bogus timeout (that I added for debugging) from vn_lock. PHK will likely still have problems with the vnode list management, and so do I, but it is better than it was.
1998-01-12 01:46:33 +00:00
TAILQ_REMOVE(&vnode_free_list, vp, v_freelist);
Simplify and rationalise the management of the vnode free list (preparing the code to add snapshots).
2000-07-04 04:32:40 +00:00
else
Update freevnodes when adding a vnode to the head of the free list.
1998-01-31 01:17:58 +00:00
freevnodes++;
Fix some vnode management problems, and better mgmt of vnode free list. Fix the UIO optimization code. Fix an assumption in vm_map_insert regarding allocation of swap pagers. Fix an spl problem in the collapse handling in vm_object_deallocate. When pages are freed from vnode objects, and the criteria for putting the associated vnode onto the free list is reached, either put the vnode onto the list, or put it onto an interrupt safe version of the list, for further transfer onto the actual free list. Some minor syntax changes changing pre-decs, pre-incs to post versions. Remove a bogus timeout (that I added for debugging) from vn_lock. PHK will likely still have problems with the vnode list management, and so do I, but it is better than it was.
1998-01-12 01:46:33 +00:00
vp->v_flag |= VFREE;
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
TAILQ_INSERT_HEAD(&vnode_free_list, vp, v_freelist);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vnode_free_list_mtx);
Fix some vnode management problems, and better mgmt of vnode free list. Fix the UIO optimization code. Fix an assumption in vm_map_insert regarding allocation of swap pagers. Fix an spl problem in the collapse handling in vm_object_deallocate. When pages are freed from vnode objects, and the criteria for putting the associated vnode onto the free list is reached, either put the vnode onto the list, or put it onto an interrupt safe version of the list, for further transfer onto the actual free list. Some minor syntax changes changing pre-decs, pre-incs to post versions. Remove a bogus timeout (that I added for debugging) from vn_lock. PHK will likely still have problems with the vnode list management, and so do I, but it is better than it was.
1998-01-12 01:46:33 +00:00
splx(s);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vp->v_type = VBAD;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vp->v_interlock);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Lookup a vnode by device number.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vfinddev(dev, type, vpp)
dev_t dev;
enum vtype type;
struct vnode **vpp;
{
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
struct vnode *vp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&spechash_mtx);
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
SLIST_FOREACH(vp, &dev->si_hlist, v_specnext) {
if (type == vp->v_type) {
*vpp = vp;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&spechash_mtx);
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
return (1);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&spechash_mtx);
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
return (0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Calculate the total number of references to a special device.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vcount(vp)
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
struct vnode *vp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
remove unused variables.
1999-08-28 19:21:03 +00:00
struct vnode *vq;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int count;
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
count = 0;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&spechash_mtx);
Rename lminor() to dev2unit(). This function gives a linear unit number which hides the 'hole' in the minor bits. Introduce unit2minor() to do the reverse operation. Fix some some make_dev() calls which didn't use UID_* or GID_* macros. Kill the v_hashchain alias macro, it hides the real relationship. Introduce experimental SI_CHEAPCLONE flag set it on cloned bpfs.
2000-09-19 10:28:44 +00:00
SLIST_FOREACH(vq, &vp->v_rdev->si_hlist, v_specnext)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
count += vq->v_usecount;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&spechash_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (count);
}
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
Do refcounting of open devices (more) correctly. count_dev funtion by phk.
2000-02-07 23:05:40 +00:00
/*
* Same as above, but using the dev_t as argument
*/
int
count_dev(dev)
dev_t dev;
{
struct vnode *vp;
vp = SLIST_FIRST(&dev->si_hlist);
if (vp == NULL)
return (0);
return(vcount(vp));
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Print out a description of a vnode.
*/
static char *typename[] =
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
{"VNON", "VREG", "VDIR", "VBLK", "VCHR", "VLNK", "VSOCK", "VFIFO", "VBAD"};
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vprint(label, vp)
char *label;
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
struct vnode *vp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Examine all occurrences of sprintf(), strcat(), and str[n]cpy() for possible buffer overflow problems. Replaced most sprintf()'s with snprintf(); for others cases, added terminating NUL bytes where appropriate, replaced constants like "16" with sizeof(), etc. These changes include several bug fixes, but most changes are for maintainability's sake. Any instance where it wasn't "immediately obvious" that a buffer overflow could not occur was made safer. Reviewed by: Bruce Evans <bde@zeta.org.au> Reviewed by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Mike Spengler <mks@networkcs.com>
1998-12-04 22:54:57 +00:00
char buf[96];
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (label != NULL)
Fixed printf format errors.
1998-07-11 07:46:16 +00:00
printf("%s: %p: ", label, (void *)vp);
Add a function vop_sharedlock which a copy of vop_nolock without the implementation #ifdef out. This can be used for now by NFS. As soon as all the other filesystems' locking is fixed, this can go away. Print the vnode address in vprint for easier debugging.
1997-04-04 17:46:21 +00:00
else
Fixed printf format errors.
1998-07-11 07:46:16 +00:00
printf("%p: ", (void *)vp);
printf("type %s, usecount %d, writecount %d, refcount %d,",
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
typename[vp->v_type], vp->v_usecount, vp->v_writecount,
vp->v_holdcnt);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
buf[0] = '\0';
if (vp->v_flag & VROOT)
strcat(buf, "|VROOT");
if (vp->v_flag & VTEXT)
strcat(buf, "|VTEXT");
if (vp->v_flag & VSYSTEM)
strcat(buf, "|VSYSTEM");
if (vp->v_flag & VXLOCK)
strcat(buf, "|VXLOCK");
if (vp->v_flag & VXWANT)
strcat(buf, "|VXWANT");
if (vp->v_flag & VBWAIT)
strcat(buf, "|VBWAIT");
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
if (vp->v_flag & VDOOMED)
strcat(buf, "|VDOOMED");
if (vp->v_flag & VFREE)
strcat(buf, "|VFREE");
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
if (vp->v_flag & VOBJBUF)
strcat(buf, "|VOBJBUF");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (buf[0] != '\0')
printf(" flags (%s)", &buf[1]);
if (vp->v_data == NULL) {
printf("\n");
} else {
printf("\n\t");
VOP_PRINT(vp);
}
}
Changed #ifdef around printlockedvnodes() from DEBUG to DDB.
1995-04-16 11:33:33 +00:00
#ifdef DDB
Nitpicking and dusting performed on a train. Removes trivial warnings about unused variables, labels and other lint.
1998-10-25 17:44:59 +00:00
#include <ddb/ddb.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* List all of the locked vnodes in the system.
* Called when debugging the kernel.
*/
Nitpicking and dusting performed on a train. Removes trivial warnings about unused variables, labels and other lint.
1998-10-25 17:44:59 +00:00
DB_SHOW_COMMAND(lockedvnodes, lockedvnodes)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td = curthread; /* XXX */
Merged some missing locking from Lite2: - getnewvnode() and vref() were missing one simple_unlock() each. - the Lite2 locking changes weren't merged at all in printlockedvnodes() or sysctl_vnode(). Merging these undid some KNF style regressions.
1997-02-25 19:33:23 +00:00
struct mount *mp, *nmp;
struct vnode *vp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
printf("Locked vnodes\n");
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mountlist_mtx);
struct mountlist and struct mount.mnt_list have no business being a CIRCLEQ. Change them to TAILQ_HEAD and TAILQ_ENTRY respectively. This removes ugly mp != (void*)&mountlist comparisons. Requested by: phk Submitted by: Jake Burkholder jake@checker.org PR: 14967
1999-11-20 10:00:46 +00:00
for (mp = TAILQ_FIRST(&mountlist); mp != NULL; mp = nmp) {
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if (vfs_busy(mp, LK_NOWAIT, &mountlist_mtx, td)) {
struct mountlist and struct mount.mnt_list have no business being a CIRCLEQ. Change them to TAILQ_HEAD and TAILQ_ENTRY respectively. This removes ugly mp != (void*)&mountlist comparisons. Requested by: phk Submitted by: Jake Burkholder jake@checker.org PR: 14967
1999-11-20 10:00:46 +00:00
nmp = TAILQ_NEXT(mp, mnt_list);
Merged some missing locking from Lite2: - getnewvnode() and vref() were missing one simple_unlock() each. - the Lite2 locking changes weren't merged at all in printlockedvnodes() or sysctl_vnode(). Merging these undid some KNF style regressions.
1997-02-25 19:33:23 +00:00
continue;
}
- Fix a mntvnode and vnode interlock reversal. - Protect the mnt_vnode list with the mntvnode lock.
2001-06-28 04:05:54 +00:00
mtx_lock(&mntvnode_mtx);
Change the vnode list under the mount point from a LIST to a TAILQ in preparation for an implementation of limiting code for kern.maxvnodes. MFC after: 3 days
2001-10-23 01:21:29 +00:00
TAILQ_FOREACH(vp, &mp->mnt_nvnodelist, v_nmntvnodes) {
Lock reporting and assertion changes. * lockstatus() and VOP_ISLOCKED() gets a new process argument and a new return value: LK_EXCLOTHER, when the lock is held exclusively by another process. * The ASSERT_VOP_(UN)LOCKED family is extended to use what this gives them * Extend the vnode_if.src format to allow more exact specification than locked/unlocked. This commit should not do any semantic changes unless you are using DEBUG_VFS_LOCKS. Discussed with: grog, mch, peter, phk Reviewed by: peter
1999-12-11 16:13:02 +00:00
if (VOP_ISLOCKED(vp, NULL))
Merged some missing locking from Lite2: - getnewvnode() and vref() were missing one simple_unlock() each. - the Lite2 locking changes weren't merged at all in printlockedvnodes() or sysctl_vnode(). Merging these undid some KNF style regressions.
1997-02-25 19:33:23 +00:00
vprint((char *)0, vp);
}
- Fix a mntvnode and vnode interlock reversal. - Protect the mnt_vnode list with the mntvnode lock.
2001-06-28 04:05:54 +00:00
mtx_unlock(&mntvnode_mtx);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mountlist_mtx);
struct mountlist and struct mount.mnt_list have no business being a CIRCLEQ. Change them to TAILQ_HEAD and TAILQ_ENTRY respectively. This removes ugly mp != (void*)&mountlist comparisons. Requested by: phk Submitted by: Jake Burkholder jake@checker.org PR: 14967
1999-11-20 10:00:46 +00:00
nmp = TAILQ_NEXT(mp, mnt_list);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vfs_unbusy(mp, td);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mountlist_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
#endif
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
/*
* Top level filesystem related information gathering.
*/
Remove __P.
2002-03-19 21:25:46 +00:00
static int sysctl_ovfs_conf(SYSCTL_HANDLER_ARGS);
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
Attach vfs_sysctl() one level lower so that only the levels below VFS_GENERIC aren't done in the FreeBSD way. The previous commit broke the nfs sysctls.
1997-03-04 18:31:56 +00:00
static int
Previous commit changing SYSCTL_HANDLER_ARGS violated KNF. Pointed out by: bde
2000-07-04 11:25:35 +00:00
vfs_sysctl(SYSCTL_HANDLER_ARGS)
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
{
Attach vfs_sysctl() one level lower so that only the levels below VFS_GENERIC aren't done in the FreeBSD way. The previous commit broke the nfs sysctls.
1997-03-04 18:31:56 +00:00
int *name = (int *)arg1 - 1; /* XXX */
u_int namelen = arg2 + 1; /* XXX */
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
struct vfsconf *vfsp;
Oops, the previous revision unconfigured too much pre-Lite2 compatibilty cruft. At least lsvfs(1) was broken.
1998-08-29 13:13:10 +00:00
#if 1 || defined(COMPAT_PRELITE2)
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
/* Resolve ambiguity between VFS_VFSCONF and VFS_GENERIC. */
Attach vfs_sysctl() one level lower so that only the levels below VFS_GENERIC aren't done in the FreeBSD way. The previous commit broke the nfs sysctls.
1997-03-04 18:31:56 +00:00
if (namelen == 1)
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
return (sysctl_ovfs_conf(oidp, arg1, arg2, req));
#endif
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
/* XXX the below code does not compile; vfs_sysctl does not exist. */
Attach vfs_sysctl() one level lower so that only the levels below VFS_GENERIC aren't done in the FreeBSD way. The previous commit broke the nfs sysctls.
1997-03-04 18:31:56 +00:00
#ifdef notyet
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
/* all sysctl names at this level are at least name and field */
if (namelen < 2)
return (ENOTDIR); /* overloaded */
if (name[0] != VFS_GENERIC) {
for (vfsp = vfsconf; vfsp; vfsp = vfsp->vfc_next)
if (vfsp->vfc_typenum == name[0])
break;
if (vfsp == NULL)
return (EOPNOTSUPP);
return ((*vfsp->vfc_vfsops->vfs_sysctl)(&name[1], namelen - 1,
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
oldp, oldlenp, newp, newlen, td));
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
}
Attach vfs_sysctl() one level lower so that only the levels below VFS_GENERIC aren't done in the FreeBSD way. The previous commit broke the nfs sysctls.
1997-03-04 18:31:56 +00:00
#endif
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
switch (name[1]) {
case VFS_MAXTYPENUM:
if (namelen != 2)
return (ENOTDIR);
return (SYSCTL_OUT(req, &maxvfsconf, sizeof(int)));
case VFS_CONF:
if (namelen != 3)
return (ENOTDIR); /* overloaded */
for (vfsp = vfsconf; vfsp; vfsp = vfsp->vfc_next)
if (vfsp->vfc_typenum == name[2])
break;
if (vfsp == NULL)
return (EOPNOTSUPP);
return (SYSCTL_OUT(req, vfsp, sizeof *vfsp));
}
return (EOPNOTSUPP);
}
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
Attach vfs_sysctl() one level lower so that only the levels below VFS_GENERIC aren't done in the FreeBSD way. The previous commit broke the nfs sysctls.
1997-03-04 18:31:56 +00:00
SYSCTL_NODE(_vfs, VFS_GENERIC, generic, CTLFLAG_RD, vfs_sysctl,
"Generic filesystem");
Oops, the previous revision unconfigured too much pre-Lite2 compatibilty cruft. At least lsvfs(1) was broken.
1998-08-29 13:13:10 +00:00
#if 1 || defined(COMPAT_PRELITE2)
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
static int
Previous commit changing SYSCTL_HANDLER_ARGS violated KNF. Pointed out by: bde
2000-07-04 11:25:35 +00:00
sysctl_ovfs_conf(SYSCTL_HANDLER_ARGS)
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
{
int error;
struct vfsconf *vfsp;
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
struct ovfsconf ovfs;
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
for (vfsp = vfsconf; vfsp; vfsp = vfsp->vfc_next) {
ovfs.vfc_vfsops = vfsp->vfc_vfsops; /* XXX used as flag */
strcpy(ovfs.vfc_name, vfsp->vfc_name);
ovfs.vfc_index = vfsp->vfc_typenum;
ovfs.vfc_refcount = vfsp->vfc_refcount;
ovfs.vfc_flags = vfsp->vfc_flags;
error = SYSCTL_OUT(req, &ovfs, sizeof ovfs);
if (error)
return error;
}
return 0;
}
Oops, the previous revision unconfigured too much pre-Lite2 compatibilty cruft. At least lsvfs(1) was broken.
1998-08-29 13:13:10 +00:00
#endif /* 1 || COMPAT_PRELITE2 */
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
#if COMPILING_LINT
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#define KINFO_VNODESLOP 10
/*
* Dump vnode list (via sysctl).
* Copyout address of vnode followed by vnode.
*/
/* ARGSUSED */
Mega commit for sysctl. Convert the remaining sysctl stuff to the new way of doing things. the devconf stuff is the reason for the large number of files. Cleaned up some compiler warnings while I were there.
1995-11-20 12:42:39 +00:00
static int
Previous commit changing SYSCTL_HANDLER_ARGS violated KNF. Pointed out by: bde
2000-07-04 11:25:35 +00:00
sysctl_vnode(SYSCTL_HANDLER_ARGS)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td = curthread; /* XXX */
Merged some missing locking from Lite2: - getnewvnode() and vref() were missing one simple_unlock() each. - the Lite2 locking changes weren't merged at all in printlockedvnodes() or sysctl_vnode(). Merging these undid some KNF style regressions.
1997-02-25 19:33:23 +00:00
struct mount *mp, *nmp;
struct vnode *nvp, *vp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
int error;
#define VPTRSZ sizeof (struct vnode *)
#define VNODESZ sizeof (struct vnode)
Mega commit for sysctl. Convert the remaining sysctl stuff to the new way of doing things. the devconf stuff is the reason for the large number of files. Cleaned up some compiler warnings while I were there.
1995-11-20 12:42:39 +00:00
req->lock = 0;
A test was backwards. Noticed by: Cheng, Hsiao-Yang <sycheng@cis.ufl.edu>
1995-11-29 11:28:00 +00:00
if (!req->oldptr) /* Make an estimate */
Mega commit for sysctl. Convert the remaining sysctl stuff to the new way of doing things. the devconf stuff is the reason for the large number of files. Cleaned up some compiler warnings while I were there.
1995-11-20 12:42:39 +00:00
return (SYSCTL_OUT(req, 0,
(numvnodes + KINFO_VNODESLOP) * (VPTRSZ + VNODESZ)));
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mountlist_mtx);
struct mountlist and struct mount.mnt_list have no business being a CIRCLEQ. Change them to TAILQ_HEAD and TAILQ_ENTRY respectively. This removes ugly mp != (void*)&mountlist comparisons. Requested by: phk Submitted by: Jake Burkholder jake@checker.org PR: 14967
1999-11-20 10:00:46 +00:00
for (mp = TAILQ_FIRST(&mountlist); mp != NULL; mp = nmp) {
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if (vfs_busy(mp, LK_NOWAIT, &mountlist_mtx, td)) {
struct mountlist and struct mount.mnt_list have no business being a CIRCLEQ. Change them to TAILQ_HEAD and TAILQ_ENTRY respectively. This removes ugly mp != (void*)&mountlist comparisons. Requested by: phk Submitted by: Jake Burkholder jake@checker.org PR: 14967
1999-11-20 10:00:46 +00:00
nmp = TAILQ_NEXT(mp, mnt_list);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
continue;
Merged some missing locking from Lite2: - getnewvnode() and vref() were missing one simple_unlock() each. - the Lite2 locking changes weren't merged at all in printlockedvnodes() or sysctl_vnode(). Merging these undid some KNF style regressions.
1997-02-25 19:33:23 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mntvnode_mtx);
- Fix a mntvnode and vnode interlock reversal. - Protect the mnt_vnode list with the mntvnode lock.
2001-06-28 04:05:54 +00:00
again:
Change the vnode list under the mount point from a LIST to a TAILQ in preparation for an implementation of limiting code for kern.maxvnodes. MFC after: 3 days
2001-10-23 01:21:29 +00:00
for (vp = TAILQ_FIRST(&mp->mnt_nvnodelist);
Merged some missing locking from Lite2: - getnewvnode() and vref() were missing one simple_unlock() each. - the Lite2 locking changes weren't merged at all in printlockedvnodes() or sysctl_vnode(). Merging these undid some KNF style regressions.
1997-02-25 19:33:23 +00:00
vp != NULL;
vp = nvp) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
Merged some missing locking from Lite2: - getnewvnode() and vref() were missing one simple_unlock() each. - the Lite2 locking changes weren't merged at all in printlockedvnodes() or sysctl_vnode(). Merging these undid some KNF style regressions.
1997-02-25 19:33:23 +00:00
* Check that the vp is still associated with
* this filesystem. RACE: could have been
* recycled onto the same filesystem.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
- Fix a mntvnode and vnode interlock reversal. - Protect the mnt_vnode list with the mntvnode lock.
2001-06-28 04:05:54 +00:00
if (vp->v_mount != mp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto again;
Change the vnode list under the mount point from a LIST to a TAILQ in preparation for an implementation of limiting code for kern.maxvnodes. MFC after: 3 days
2001-10-23 01:21:29 +00:00
nvp = TAILQ_NEXT(vp, v_nmntvnodes);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mntvnode_mtx);
Mega commit for sysctl. Convert the remaining sysctl stuff to the new way of doing things. the devconf stuff is the reason for the large number of files. Cleaned up some compiler warnings while I were there.
1995-11-20 12:42:39 +00:00
if ((error = SYSCTL_OUT(req, &vp, VPTRSZ)) ||
Merged some missing locking from Lite2: - getnewvnode() and vref() were missing one simple_unlock() each. - the Lite2 locking changes weren't merged at all in printlockedvnodes() or sysctl_vnode(). Merging these undid some KNF style regressions.
1997-02-25 19:33:23 +00:00
(error = SYSCTL_OUT(req, vp, VNODESZ)))
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (error);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mntvnode_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mntvnode_mtx);
mtx_lock(&mountlist_mtx);
struct mountlist and struct mount.mnt_list have no business being a CIRCLEQ. Change them to TAILQ_HEAD and TAILQ_ENTRY respectively. This removes ugly mp != (void*)&mountlist comparisons. Requested by: phk Submitted by: Jake Burkholder jake@checker.org PR: 14967
1999-11-20 10:00:46 +00:00
nmp = TAILQ_NEXT(mp, mnt_list);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vfs_unbusy(mp, td);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mountlist_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (0);
}
Disabled the kern.vnode sysctl variable. It's causing system crashes on large systems and needs to be re-thinked or removed wholesale.
1997-06-10 02:48:08 +00:00
/*
* XXX
* Exporting the vnode list on large systems causes them to crash.
* Exporting the vnode list on medium systems causes sysctl to coredump.
*/
A couple of minor tweaks to the sysctl stuff.
1995-12-06 13:27:39 +00:00
SYSCTL_PROC(_kern, KERN_VNODE, vnode, CTLTYPE_OPAQUE|CTLFLAG_RD,
0, 0, sysctl_vnode, "S,vnode", "");
Disabled the kern.vnode sysctl variable. It's causing system crashes on large systems and needs to be re-thinked or removed wholesale.
1997-06-10 02:48:08 +00:00
#endif
Mega commit for sysctl. Convert the remaining sysctl stuff to the new way of doing things. the devconf stuff is the reason for the large number of files. Cleaned up some compiler warnings while I were there.
1995-11-20 12:42:39 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Check to see if a filesystem is mounted on a block device.
*/
int
vfs_mountedon(vp)
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
struct vnode *vp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Blow away the v_specmountpoint define, replacing it with what it was defined as (rdev->si_mountpoint)
2000-10-09 17:31:39 +00:00
if (vp->v_rdev->si_mountpoint != NULL)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (EBUSY);
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
return (0);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
/*
Fixed unmounting of the root fs. vfs_unmountroot() wasn't fully updated to do Lite2 locking and vfs_unmountall() wasn't as simple as the Lite2 version.
1997-02-26 15:35:42 +00:00
* Unmount all filesystems. The list is traversed in reverse order
* of mounting to avoid dependencies.
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
*/
void
vfs_unmountall()
{
struct mountlist and struct mount.mnt_list have no business being a CIRCLEQ. Change them to TAILQ_HEAD and TAILQ_ENTRY respectively. This removes ugly mp != (void*)&mountlist comparisons. Requested by: phk Submitted by: Jake Burkholder jake@checker.org PR: 14967
1999-11-20 10:00:46 +00:00
struct mount *mp;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
int error;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if (curthread != NULL)
td = curthread;
Supply the correct process argument to dounmount when possible.
1998-05-17 19:38:55 +00:00
else
Fix a couple of style bugs introduced (or touched by) previous commit.
2002-02-07 23:06:26 +00:00
td = FIRST_THREAD_IN_PROC(initproc); /* XXX XXX proc0? */
Fixed unmounting of the root fs. vfs_unmountroot() wasn't fully updated to do Lite2 locking and vfs_unmountall() wasn't as simple as the Lite2 version.
1997-02-26 15:35:42 +00:00
/*
* Since this only runs when rebooting, it is not interlocked.
*/
struct mountlist and struct mount.mnt_list have no business being a CIRCLEQ. Change them to TAILQ_HEAD and TAILQ_ENTRY respectively. This removes ugly mp != (void*)&mountlist comparisons. Requested by: phk Submitted by: Jake Burkholder jake@checker.org PR: 14967
1999-11-20 10:00:46 +00:00
while(!TAILQ_EMPTY(&mountlist)) {
mp = TAILQ_LAST(&mountlist, mntlist);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
error = dounmount(mp, MNT_FORCE, td);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (error) {
struct mountlist and struct mount.mnt_list have no business being a CIRCLEQ. Change them to TAILQ_HEAD and TAILQ_ENTRY respectively. This removes ugly mp != (void*)&mountlist comparisons. Requested by: phk Submitted by: Jake Burkholder jake@checker.org PR: 14967
1999-11-20 10:00:46 +00:00
TAILQ_REMOVE(&mountlist, mp, mnt_list);
Fixed unmounting of the root fs. vfs_unmountroot() wasn't fully updated to do Lite2 locking and vfs_unmountall() wasn't as simple as the Lite2 version.
1997-02-26 15:35:42 +00:00
printf("unmount of %s failed (",
mp->mnt_stat.f_mntonname);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
if (error == EBUSY)
printf("BUSY)\n");
else
printf("%d)\n", error);
struct mountlist and struct mount.mnt_list have no business being a CIRCLEQ. Change them to TAILQ_HEAD and TAILQ_ENTRY respectively. This removes ugly mp != (void*)&mountlist comparisons. Requested by: phk Submitted by: Jake Burkholder jake@checker.org PR: 14967
1999-11-20 10:00:46 +00:00
} else {
/* The unmount has removed mp from the mountlist */
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
/*
* perform msync on all vnodes under a mount point
* the mount point must be locked.
*/
void
Change the vnode list under the mount point from a LIST to a TAILQ in preparation for an implementation of limiting code for kern.maxvnodes. MFC after: 3 days
2001-10-23 01:21:29 +00:00
vfs_msync(struct mount *mp, int flags)
{
Changes to support 1Tb filesizes. Pages are now named by an (object,index) pair instead of (object,offset) pair.
1995-12-11 04:58:34 +00:00
struct vnode *vp, *nvp;
In vfs_msync(), test to see if the vnode being examined is "interesting" (ie: it has a vm_object attached and is marked as OBJ_MIGHTBEDIRTY) before attempting to lock it. This should reduce the cpu hit that is incurred when doing a sync(2) and when the syncer process is doing the 30-second writeback of dirty mmap() data to disk. Skip this speedup if we are doing an unmount() to be sure to get everything - we can afford to occasionally miss a msync while the system is running, but not at unmount. I'm not sure about the VXLOCK and MNT_WAIT case, it seems a bit odd to skip doing a page_clean at unmount time just because a vnode is VXLOCKed, but that's what was being done before...
1998-04-18 06:26:16 +00:00
struct vm_object *obj;
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
int tries;
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
With Alfred's permission, remove vm_mtx in favor of a fine-grained approach (this commit is just the first stage). Also add various GIANT_ macros to formalize the removal of Giant, making it easy to test in a more piecemeal fashion. These macros will allow us to test fine-grained locks to a degree before removing Giant, and also after, and to remove Giant in a piecemeal fashion via sysctl's on those subsystems which the authors believe can operate without Giant.
2001-07-04 16:20:28 +00:00
GIANT_REQUIRED;
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
tries = 5;
- Fix a mntvnode and vnode interlock reversal. - Protect the mnt_vnode list with the mntvnode lock.
2001-06-28 04:05:54 +00:00
mtx_lock(&mntvnode_mtx);
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
loop:
Change the vnode list under the mount point from a LIST to a TAILQ in preparation for an implementation of limiting code for kern.maxvnodes. MFC after: 3 days
2001-10-23 01:21:29 +00:00
for (vp = TAILQ_FIRST(&mp->mnt_nvnodelist); vp != NULL; vp = nvp) {
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
if (vp->v_mount != mp) {
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
if (--tries > 0)
goto loop;
break;
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
}
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
nvp = TAILQ_NEXT(vp, v_nmntvnodes);
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
In vfs_msync(), test to see if the vnode being examined is "interesting" (ie: it has a vm_object attached and is marked as OBJ_MIGHTBEDIRTY) before attempting to lock it. This should reduce the cpu hit that is incurred when doing a sync(2) and when the syncer process is doing the 30-second writeback of dirty mmap() data to disk. Skip this speedup if we are doing an unmount() to be sure to get everything - we can afford to occasionally miss a msync while the system is running, but not at unmount. I'm not sure about the VXLOCK and MNT_WAIT case, it seems a bit odd to skip doing a page_clean at unmount time just because a vnode is VXLOCKed, but that's what was being done before...
1998-04-18 06:26:16 +00:00
if (vp->v_flag & VXLOCK) /* XXX: what if MNT_WAIT? */
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
continue;
In vfs_msync(), test to see if the vnode being examined is "interesting" (ie: it has a vm_object attached and is marked as OBJ_MIGHTBEDIRTY) before attempting to lock it. This should reduce the cpu hit that is incurred when doing a sync(2) and when the syncer process is doing the 30-second writeback of dirty mmap() data to disk. Skip this speedup if we are doing an unmount() to be sure to get everything - we can afford to occasionally miss a msync while the system is running, but not at unmount. I'm not sure about the VXLOCK and MNT_WAIT case, it seems a bit odd to skip doing a page_clean at unmount time just because a vnode is VXLOCKed, but that's what was being done before...
1998-04-18 06:26:16 +00:00
If a file has been completely unlinked, stop automatically syncing the file. ffs will discard any pending dirty pages when it is closed, so we may as well not waste time trying to clean them. This doesn't stop other things from writing it out, eg: pageout, fsync(2) etc.
2001-08-27 06:09:56 +00:00
if (vp->v_flag & VNOSYNC) /* unlinked, skip it */
continue;
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
if ((vp->v_flag & VOBJDIRTY) &&
(flags == MNT_WAIT || VOP_ISLOCKED(vp, NULL) == 0)) {
mtx_unlock(&mntvnode_mtx);
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
if (!vget(vp,
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
LK_EXCLUSIVE | LK_RETRY | LK_NOOBJ, curthread)) {
Add three new VOPs: VOP_CREATEVOBJECT, VOP_DESTROYVOBJECT and VOP_GETVOBJECT. They will be used by nullfs and other stacked filesystems to support full cache coherency. Reviewed in general by: mckusick, dillon
2000-09-12 09:49:08 +00:00
if (VOP_GETVOBJECT(vp, &obj) == 0) {
Introduce a global lock for the vm subsystem (vm_mtx). vm_mtx does not recurse and is required for most low level vm operations. faults can not be taken without holding Giant. Memory subsystems can now call the base page allocators safely. Almost all atomic ops were removed as they are covered under the vm mutex. Alpha and ia64 now need to catch up to i386's trap handlers. FFS and NFS have been tested, other filesystems will need minor changes (grabbing the vm lock when twiddling page properties). Reviewed (partially) by: jake, jhb
2001-05-19 01:28:09 +00:00
vm_object_page_clean(obj, 0, 0,
flags == MNT_WAIT ?
OBJPC_SYNC : OBJPC_NOSYNC);
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
}
vput(vp);
}
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
mtx_lock(&mntvnode_mtx);
if (TAILQ_NEXT(vp, v_nmntvnodes) != nvp) {
if (--tries > 0)
goto loop;
break;
}
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
}
}
- Fix a mntvnode and vnode interlock reversal. - Protect the mnt_vnode list with the mntvnode lock.
2001-06-28 04:05:54 +00:00
mtx_unlock(&mntvnode_mtx);
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
}
Even though this looks like it, this is not a complex code change. The interface into the "VMIO" system has changed to be more consistant and robust. Essentially, it is now no longer necessary to call vn_open to get merged VM/Buffer cache operation, and exceptional conditions such as merged operation of VBLK devices is simpler and more correct. This code corrects a potentially large set of problems including the problems with ktrace output and loaded systems, file create/deletes, etc. Most of the changes to NFS are cosmetic and name changes, eliminating a layer of subroutine calls. The direct calls to vput/vrele have been re-instituted for better cross platform compatibility. Reviewed by: davidg
1996-08-21 21:56:23 +00:00
/*
* Create the VM object needed for VMIO and mmap support. This
* is done for all VREG files in the system. Some filesystems might
* afford the additional metadata buffering capability of the
* VMIO code by making the device node be VMIO mode also.
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
*
Remove the 'waslocked' parameter to vfs_object_create().
1999-01-05 18:50:03 +00:00
* vp must be locked when vfs_object_create is called.
Even though this looks like it, this is not a complex code change. The interface into the "VMIO" system has changed to be more consistant and robust. Essentially, it is now no longer necessary to call vn_open to get merged VM/Buffer cache operation, and exceptional conditions such as merged operation of VBLK devices is simpler and more correct. This code corrects a potentially large set of problems including the problems with ktrace output and loaded systems, file create/deletes, etc. Most of the changes to NFS are cosmetic and name changes, eliminating a layer of subroutine calls. The direct calls to vput/vrele have been re-instituted for better cross platform compatibility. Reviewed by: davidg
1996-08-21 21:56:23 +00:00
*/
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vfs_object_create(vp, td, cred)
Even though this looks like it, this is not a complex code change. The interface into the "VMIO" system has changed to be more consistant and robust. Essentially, it is now no longer necessary to call vn_open to get merged VM/Buffer cache operation, and exceptional conditions such as merged operation of VBLK devices is simpler and more correct. This code corrects a potentially large set of problems including the problems with ktrace output and loaded systems, file create/deletes, etc. Most of the changes to NFS are cosmetic and name changes, eliminating a layer of subroutine calls. The direct calls to vput/vrele have been re-instituted for better cross platform compatibility. Reviewed by: davidg
1996-08-21 21:56:23 +00:00
struct vnode *vp;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td;
Even though this looks like it, this is not a complex code change. The interface into the "VMIO" system has changed to be more consistant and robust. Essentially, it is now no longer necessary to call vn_open to get merged VM/Buffer cache operation, and exceptional conditions such as merged operation of VBLK devices is simpler and more correct. This code corrects a potentially large set of problems including the problems with ktrace output and loaded systems, file create/deletes, etc. Most of the changes to NFS are cosmetic and name changes, eliminating a layer of subroutine calls. The direct calls to vput/vrele have been re-instituted for better cross platform compatibility. Reviewed by: davidg
1996-08-21 21:56:23 +00:00
struct ucred *cred;
{
With Alfred's permission, remove vm_mtx in favor of a fine-grained approach (this commit is just the first stage). Also add various GIANT_ macros to formalize the removal of Giant, making it easy to test in a more piecemeal fashion. These macros will allow us to test fine-grained locks to a degree before removing Giant, and also after, and to remove Giant in a piecemeal fashion via sysctl's on those subsystems which the authors believe can operate without Giant.
2001-07-04 16:20:28 +00:00
GIANT_REQUIRED;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
return (VOP_CREATEVOBJECT(vp, cred, td));
Even though this looks like it, this is not a complex code change. The interface into the "VMIO" system has changed to be more consistant and robust. Essentially, it is now no longer necessary to call vn_open to get merged VM/Buffer cache operation, and exceptional conditions such as merged operation of VBLK devices is simpler and more correct. This code corrects a potentially large set of problems including the problems with ktrace output and loaded systems, file create/deletes, etc. Most of the changes to NFS are cosmetic and name changes, eliminating a layer of subroutine calls. The direct calls to vput/vrele have been re-instituted for better cross platform compatibility. Reviewed by: davidg
1996-08-21 21:56:23 +00:00
}
1. Add a {pointer, v_id} pair to the vnode to store the reference to the ".." vnode. This is cheaper storagewise than keeping it in the namecache, and it makes more sense since it's a 1:1 mapping. 2. Also handle the case of "." more intelligently rather than stuff the namecache with pointless entries. 3. Add two lists to the vnode and hang namecache entries which go from or to this vnode. When cleaning a vnode, delete all namecache entries it invalidates. 4. Never reuse namecache enties, malloc new ones when we need it, free old ones when they die. No longer a hard limit on how many we can have. 5. Remove the upper limit on namelength of namecache entries. 6. Make a global list for negative namecache entries, limit their number to a sysctl'able (debug.ncnegfactor) fraction of the total namecache. Currently the default fraction is 1/16th. (Suggestions for better default wanted!) 7. Assign v_id correctly in the face of 32bit rollover. 8. Remove the LRU list for namecache entries, not needed. Remove the #ifdef NCH_STATISTICS stuff, it's not needed either. 9. Use the vnode freelist as a true LRU list, also for namecache accesses. 10. Reuse vnodes more aggresively but also more selectively, if we can't reuse, malloc a new one. There is no longer a hard limit on their number, they grow to the point where we don't reuse potentially usable vnodes. A vnode will not get recycled if still has pages in core or if it is the source of namecache entries (Yes, this does indeed work :-) "." and ".." are not namecache entries any longer...) 11. Do not overload the v_id field in namecache entries with whiteout information, use a char sized flags field instead, so we can get rid of the vpid and v_id fields from the namecache struct. Since we're linked to the vnodes and purged when they're cleaned, we don't have to check the v_id any more. 12. NFS knew about the limitation on name length in the namecache, it shouldn't and doesn't now. Bugs: The namecache statistics no longer includes the hits for ".." and "." hits. Performance impact: Generally in the +/- 0.5% for "normal" workstations, but I hope this will allow the system to be selftuning over a bigger range of "special" applications. The case where RAM is available but unused for cache because we don't have any vnodes should be gone. Future work: Straighten out the namecache statistics. "desiredvnodes" is still used to (bogusly ?) size hash tables in the filesystems. I have still to find a way to safely free unused vnodes back so their number can shrink when not needed. There is a few uses of the v_id field left in the filesystems, scheduled for demolition at a later time. Maybe a one slot cache for unused namecache entries should be implemented to decrease the malloc/free frequency.
1997-05-04 09:17:38 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
* Mark a vnode as free, putting it up for recycling.
*/
Simplify and rationalise the management of the vnode free list (preparing the code to add snapshots).
2000-07-04 04:32:40 +00:00
void
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
vfree(vp)
1. Add a {pointer, v_id} pair to the vnode to store the reference to the ".." vnode. This is cheaper storagewise than keeping it in the namecache, and it makes more sense since it's a 1:1 mapping. 2. Also handle the case of "." more intelligently rather than stuff the namecache with pointless entries. 3. Add two lists to the vnode and hang namecache entries which go from or to this vnode. When cleaning a vnode, delete all namecache entries it invalidates. 4. Never reuse namecache enties, malloc new ones when we need it, free old ones when they die. No longer a hard limit on how many we can have. 5. Remove the upper limit on namelength of namecache entries. 6. Make a global list for negative namecache entries, limit their number to a sysctl'able (debug.ncnegfactor) fraction of the total namecache. Currently the default fraction is 1/16th. (Suggestions for better default wanted!) 7. Assign v_id correctly in the face of 32bit rollover. 8. Remove the LRU list for namecache entries, not needed. Remove the #ifdef NCH_STATISTICS stuff, it's not needed either. 9. Use the vnode freelist as a true LRU list, also for namecache accesses. 10. Reuse vnodes more aggresively but also more selectively, if we can't reuse, malloc a new one. There is no longer a hard limit on their number, they grow to the point where we don't reuse potentially usable vnodes. A vnode will not get recycled if still has pages in core or if it is the source of namecache entries (Yes, this does indeed work :-) "." and ".." are not namecache entries any longer...) 11. Do not overload the v_id field in namecache entries with whiteout information, use a char sized flags field instead, so we can get rid of the vpid and v_id fields from the namecache struct. Since we're linked to the vnodes and purged when they're cleaned, we don't have to check the v_id any more. 12. NFS knew about the limitation on name length in the namecache, it shouldn't and doesn't now. Bugs: The namecache statistics no longer includes the hits for ".." and "." hits. Performance impact: Generally in the +/- 0.5% for "normal" workstations, but I hope this will allow the system to be selftuning over a bigger range of "special" applications. The case where RAM is available but unused for cache because we don't have any vnodes should be gone. Future work: Straighten out the namecache statistics. "desiredvnodes" is still used to (bogusly ?) size hash tables in the filesystems. I have still to find a way to safely free unused vnodes back so their number can shrink when not needed. There is a few uses of the v_id field left in the filesystems, scheduled for demolition at a later time. Maybe a one slot cache for unused namecache entries should be implemented to decrease the malloc/free frequency.
1997-05-04 09:17:38 +00:00
struct vnode *vp;
{
Fix some vnode management problems, and better mgmt of vnode free list. Fix the UIO optimization code. Fix an assumption in vm_map_insert regarding allocation of swap pagers. Fix an spl problem in the collapse handling in vm_object_deallocate. When pages are freed from vnode objects, and the criteria for putting the associated vnode onto the free list is reached, either put the vnode onto the list, or put it onto an interrupt safe version of the list, for further transfer onto the actual free list. Some minor syntax changes changing pre-decs, pre-incs to post versions. Remove a bogus timeout (that I added for debugging) from vn_lock. PHK will likely still have problems with the vnode list management, and so do I, but it is better than it was.
1998-01-12 01:46:33 +00:00
int s;
s = splbio();
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vnode_free_list_mtx);
Simplify and rationalise the management of the vnode free list (preparing the code to add snapshots).
2000-07-04 04:32:40 +00:00
KASSERT((vp->v_flag & VFREE) == 0, ("vnode already free"));
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
if (vp->v_flag & VAGE) {
TAILQ_INSERT_HEAD(&vnode_free_list, vp, v_freelist);
} else {
TAILQ_INSERT_TAIL(&vnode_free_list, vp, v_freelist);
1. Add a {pointer, v_id} pair to the vnode to store the reference to the ".." vnode. This is cheaper storagewise than keeping it in the namecache, and it makes more sense since it's a 1:1 mapping. 2. Also handle the case of "." more intelligently rather than stuff the namecache with pointless entries. 3. Add two lists to the vnode and hang namecache entries which go from or to this vnode. When cleaning a vnode, delete all namecache entries it invalidates. 4. Never reuse namecache enties, malloc new ones when we need it, free old ones when they die. No longer a hard limit on how many we can have. 5. Remove the upper limit on namelength of namecache entries. 6. Make a global list for negative namecache entries, limit their number to a sysctl'able (debug.ncnegfactor) fraction of the total namecache. Currently the default fraction is 1/16th. (Suggestions for better default wanted!) 7. Assign v_id correctly in the face of 32bit rollover. 8. Remove the LRU list for namecache entries, not needed. Remove the #ifdef NCH_STATISTICS stuff, it's not needed either. 9. Use the vnode freelist as a true LRU list, also for namecache accesses. 10. Reuse vnodes more aggresively but also more selectively, if we can't reuse, malloc a new one. There is no longer a hard limit on their number, they grow to the point where we don't reuse potentially usable vnodes. A vnode will not get recycled if still has pages in core or if it is the source of namecache entries (Yes, this does indeed work :-) "." and ".." are not namecache entries any longer...) 11. Do not overload the v_id field in namecache entries with whiteout information, use a char sized flags field instead, so we can get rid of the vpid and v_id fields from the namecache struct. Since we're linked to the vnodes and purged when they're cleaned, we don't have to check the v_id any more. 12. NFS knew about the limitation on name length in the namecache, it shouldn't and doesn't now. Bugs: The namecache statistics no longer includes the hits for ".." and "." hits. Performance impact: Generally in the +/- 0.5% for "normal" workstations, but I hope this will allow the system to be selftuning over a bigger range of "special" applications. The case where RAM is available but unused for cache because we don't have any vnodes should be gone. Future work: Straighten out the namecache statistics. "desiredvnodes" is still used to (bogusly ?) size hash tables in the filesystems. I have still to find a way to safely free unused vnodes back so their number can shrink when not needed. There is a few uses of the v_id field left in the filesystems, scheduled for demolition at a later time. Maybe a one slot cache for unused namecache entries should be implemented to decrease the malloc/free frequency.
1997-05-04 09:17:38 +00:00
}
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
freevnodes++;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vnode_free_list_mtx);
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
vp->v_flag &= ~VAGE;
vp->v_flag |= VFREE;
Fix some vnode management problems, and better mgmt of vnode free list. Fix the UIO optimization code. Fix an assumption in vm_map_insert regarding allocation of swap pagers. Fix an spl problem in the collapse handling in vm_object_deallocate. When pages are freed from vnode objects, and the criteria for putting the associated vnode onto the free list is reached, either put the vnode onto the list, or put it onto an interrupt safe version of the list, for further transfer onto the actual free list. Some minor syntax changes changing pre-decs, pre-incs to post versions. Remove a bogus timeout (that I added for debugging) from vn_lock. PHK will likely still have problems with the vnode list management, and so do I, but it is better than it was.
1998-01-12 01:46:33 +00:00
splx(s);
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
}
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
* Opposite of vfree() - mark a vnode as in use.
*/
Tie up some loose ends in vnode/object management. Remove an unneeded config option in pmap. Fix a problem with faulting in pages. Clean-up some loose ends in swap pager memory management. The system should be much more stable, but all subtile bugs aren't fixed yet.
1998-01-17 09:17:02 +00:00
void
Change the 0xdeadb hack to a flag called VDOOMED. Introduce VFREE which indicates that vnode is on freelist. Rename vholdrele() to vdrop(). Create vfree() and vbusy() to add/delete vnode from freelist. Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0) vnodes off the freelist. Generalize vhold()/v_holdcnt to mean "do not recycle". Fix reassignbuf()s lack of use of vhold(). Use vhold() instead of checking v_cache_src list. Remove vtouch(), the vnodes are always vget'ed soon enough after for it to have any measuable effect. Add sysctl debug.freevnodes to keep track of things. Move cache_purge() up in getnewvnodes to avoid race. Decrement v_usecount after VOP_INACTIVE(), put a vhold() on it during VOP_INACTIVE() Unmacroize vhold()/vdrop() Print out VDOOMED and VFREE flags (XXX: should use %b) Reviewed by: dyson
1997-08-31 07:32:39 +00:00
vbusy(vp)
struct vnode *vp;
{
Fix some vnode management problems, and better mgmt of vnode free list. Fix the UIO optimization code. Fix an assumption in vm_map_insert regarding allocation of swap pagers. Fix an spl problem in the collapse handling in vm_object_deallocate. When pages are freed from vnode objects, and the criteria for putting the associated vnode onto the free list is reached, either put the vnode onto the list, or put it onto an interrupt safe version of the list, for further transfer onto the actual free list. Some minor syntax changes changing pre-decs, pre-incs to post versions. Remove a bogus timeout (that I added for debugging) from vn_lock. PHK will likely still have problems with the vnode list management, and so do I, but it is better than it was.
1998-01-12 01:46:33 +00:00
int s;
s = splbio();
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&vnode_free_list_mtx);
Simplify and rationalise the management of the vnode free list (preparing the code to add snapshots).
2000-07-04 04:32:40 +00:00
KASSERT((vp->v_flag & VFREE) != 0, ("vnode not free"));
TAILQ_REMOVE(&vnode_free_list, vp, v_freelist);
freevnodes--;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&vnode_free_list_mtx);
Clean-up the vget mechanism by permanently attaching VM objects to vnodes, therefore vget doesn't need to do so anymore. Other minor improvements include the temp free vnode queue obeying the VAGE flag and a printf that warns of to-be-removed code being executed.
1998-02-23 06:59:52 +00:00
vp->v_flag &= ~(VFREE|VAGE);
Fix some vnode management problems, and better mgmt of vnode free list. Fix the UIO optimization code. Fix an assumption in vm_map_insert regarding allocation of swap pagers. Fix an spl problem in the collapse handling in vm_object_deallocate. When pages are freed from vnode objects, and the criteria for putting the associated vnode onto the free list is reached, either put the vnode onto the list, or put it onto an interrupt safe version of the list, for further transfer onto the actual free list. Some minor syntax changes changing pre-decs, pre-incs to post versions. Remove a bogus timeout (that I added for debugging) from vn_lock. PHK will likely still have problems with the vnode list management, and so do I, but it is better than it was.
1998-01-12 01:46:33 +00:00
splx(s);
1. Add a {pointer, v_id} pair to the vnode to store the reference to the ".." vnode. This is cheaper storagewise than keeping it in the namecache, and it makes more sense since it's a 1:1 mapping. 2. Also handle the case of "." more intelligently rather than stuff the namecache with pointless entries. 3. Add two lists to the vnode and hang namecache entries which go from or to this vnode. When cleaning a vnode, delete all namecache entries it invalidates. 4. Never reuse namecache enties, malloc new ones when we need it, free old ones when they die. No longer a hard limit on how many we can have. 5. Remove the upper limit on namelength of namecache entries. 6. Make a global list for negative namecache entries, limit their number to a sysctl'able (debug.ncnegfactor) fraction of the total namecache. Currently the default fraction is 1/16th. (Suggestions for better default wanted!) 7. Assign v_id correctly in the face of 32bit rollover. 8. Remove the LRU list for namecache entries, not needed. Remove the #ifdef NCH_STATISTICS stuff, it's not needed either. 9. Use the vnode freelist as a true LRU list, also for namecache accesses. 10. Reuse vnodes more aggresively but also more selectively, if we can't reuse, malloc a new one. There is no longer a hard limit on their number, they grow to the point where we don't reuse potentially usable vnodes. A vnode will not get recycled if still has pages in core or if it is the source of namecache entries (Yes, this does indeed work :-) "." and ".." are not namecache entries any longer...) 11. Do not overload the v_id field in namecache entries with whiteout information, use a char sized flags field instead, so we can get rid of the vpid and v_id fields from the namecache struct. Since we're linked to the vnodes and purged when they're cleaned, we don't have to check the v_id any more. 12. NFS knew about the limitation on name length in the namecache, it shouldn't and doesn't now. Bugs: The namecache statistics no longer includes the hits for ".." and "." hits. Performance impact: Generally in the +/- 0.5% for "normal" workstations, but I hope this will allow the system to be selftuning over a bigger range of "special" applications. The case where RAM is available but unused for cache because we don't have any vnodes should be gone. Future work: Straighten out the namecache statistics. "desiredvnodes" is still used to (bogusly ?) size hash tables in the filesystems. I have still to find a way to safely free unused vnodes back so their number can shrink when not needed. There is a few uses of the v_id field left in the filesystems, scheduled for demolition at a later time. Maybe a one slot cache for unused namecache entries should be implemented to decrease the malloc/free frequency.
1997-05-04 09:17:38 +00:00
}
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
/*
* Record a process's interest in events which might happen to
* a vnode. Because poll uses the historic select-style interface
* internally, this routine serves as both the ``check for any
* pending events'' and the ``record my interest in future events''
* functions. (These are done together, while the lock is held,
* to avoid race conditions.)
*/
int
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vn_pollrecord(vp, td, events)
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
struct vnode *vp;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td;
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
short events;
{
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
Make v_addpollinfo() visible and non-inline. Have callers only call it as needed. Add necessary call in ufs_kqfilter(). Test-case found by: Andrew Gallatin <gallatin@cs.duke.edu>
2002-02-18 16:18:02 +00:00
if (vp->v_pollinfo == NULL)
v_addpollinfo(vp);
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
mtx_lock(&vp->v_pollinfo->vpi_lock);
if (vp->v_pollinfo->vpi_revents & events) {
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
/*
* This leaves events we are not interested
* in available for the other process which
* which presumably had requested them
* (otherwise they would never have been
* recorded).
*/
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
events &= vp->v_pollinfo->vpi_revents;
vp->v_pollinfo->vpi_revents &= ~events;
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
mtx_unlock(&vp->v_pollinfo->vpi_lock);
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
return events;
}
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
vp->v_pollinfo->vpi_events |= events;
selrecord(td, &vp->v_pollinfo->vpi_selinfo);
mtx_unlock(&vp->v_pollinfo->vpi_lock);
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
return 0;
}
/*
* Note the occurrence of an event. If the VN_POLLEVENT macro is used,
* it is possible for us to miss an event due to race conditions, but
* that condition is expected to be rare, so for the moment it is the
* preferred interface.
*/
void
vn_pollevent(vp, events)
struct vnode *vp;
short events;
{
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
Make v_addpollinfo() visible and non-inline. Have callers only call it as needed. Add necessary call in ufs_kqfilter(). Test-case found by: Andrew Gallatin <gallatin@cs.duke.edu>
2002-02-18 16:18:02 +00:00
if (vp->v_pollinfo == NULL)
v_addpollinfo(vp);
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
mtx_lock(&vp->v_pollinfo->vpi_lock);
if (vp->v_pollinfo->vpi_events & events) {
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
/*
* We clear vpi_events so that we don't
* call selwakeup() twice if two events are
* posted before the polling process(es) is
* awakened. This also ensures that we take at
* most one selwakeup() if the polling process
* is no longer interested. However, it does
* mean that only one event can be noticed at
* a time. (Perhaps we should only clear those
* event bits which we note?) XXX
*/
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
vp->v_pollinfo->vpi_events = 0; /* &= ~events ??? */
vp->v_pollinfo->vpi_revents |= events;
selwakeup(&vp->v_pollinfo->vpi_selinfo);
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
}
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
mtx_unlock(&vp->v_pollinfo->vpi_lock);
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
}
/*
* Wake up anyone polling on vp because it is being revoked.
* This depends on dead_poll() returning POLLHUP for correct
* behavior.
*/
void
vn_pollgone(vp)
struct vnode *vp;
{
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
mtx_lock(&vp->v_pollinfo->vpi_lock);
Add a NOTE_REVOKE flag for vnodes, which is triggered from within vclean(). Use this to tell a filter attached to a vnode that the underlying vnode is no longer valid, by returning EV_EOF. PR: kern/25309, kern/25206
2001-02-23 20:06:01 +00:00
VN_KNOTE(vp, NOTE_REVOKE);
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
if (vp->v_pollinfo->vpi_events) {
vp->v_pollinfo->vpi_events = 0;
selwakeup(&vp->v_pollinfo->vpi_selinfo);
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
}
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
mtx_unlock(&vp->v_pollinfo->vpi_lock);
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
}
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* Routine to create and manage a filesystem syncer vnode.
*/
Remove __P.
2002-03-19 21:25:46 +00:00
#define sync_close ((int (*)(struct vop_close_args *))nullop)
static int sync_fsync(struct vop_fsync_args *);
static int sync_inactive(struct vop_inactive_args *);
static int sync_reclaim(struct vop_reclaim_args *);
#define sync_lock ((int (*)(struct vop_lock_args *))vop_nolock)
#define sync_unlock ((int (*)(struct vop_unlock_args *))vop_nounlock)
static int sync_print(struct vop_print_args *);
#define sync_islocked ((int(*)(struct vop_islocked_args *))vop_noislocked)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
Staticize.
1998-12-21 23:38:33 +00:00
static vop_t **sync_vnodeop_p;
static struct vnodeopv_entry_desc sync_vnodeop_entries[] = {
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
{ &vop_default_desc, (vop_t *) vop_eopnotsupp },
{ &vop_close_desc, (vop_t *) sync_close }, /* close */
{ &vop_fsync_desc, (vop_t *) sync_fsync }, /* fsync */
{ &vop_inactive_desc, (vop_t *) sync_inactive }, /* inactive */
{ &vop_reclaim_desc, (vop_t *) sync_reclaim }, /* reclaim */
{ &vop_lock_desc, (vop_t *) sync_lock }, /* lock */
{ &vop_unlock_desc, (vop_t *) sync_unlock }, /* unlock */
{ &vop_print_desc, (vop_t *) sync_print }, /* print */
{ &vop_islocked_desc, (vop_t *) sync_islocked }, /* islocked */
{ NULL, NULL }
};
Staticize.
1998-12-21 23:38:33 +00:00
static struct vnodeopv_desc sync_vnodeop_opv_desc =
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
{ &sync_vnodeop_p, sync_vnodeop_entries };
VNODEOP_SET(sync_vnodeop_opv_desc);
/*
* Create a new filesystem syncer vnode for the specified mount point.
*/
int
vfs_allocate_syncvnode(mp)
struct mount *mp;
{
struct vnode *vp;
static long start, incr, next;
int error;
/* Allocate a new vnode */
if ((error = getnewvnode(VT_VFS, mp, sync_vnodeop_p, &vp)) != 0) {
mp->mnt_syncer = NULL;
return (error);
}
vp->v_type = VNON;
/*
* Place the vnode onto the syncer worklist. We attempt to
* scatter them about on the list so that they will go off
* at evenly distributed times even if all the filesystems
* are mounted at once.
*/
next += incr;
if (next == 0 || next > syncer_maxdelay) {
start /= 2;
incr /= 2;
if (start == 0) {
start = syncer_maxdelay / 2;
incr = syncer_maxdelay;
}
next = start;
}
vn_syncer_add_to_worklist(vp, syncdelay > 0 ? next % syncdelay : 0);
mp->mnt_syncer = vp;
return (0);
}
/*
* Do a lazy sync of the filesystem.
*/
Staticize.
1998-12-21 23:38:33 +00:00
static int
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
sync_fsync(ap)
struct vop_fsync_args /* {
struct vnode *a_vp;
struct ucred *a_cred;
int a_waitfor;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *a_td;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
} */ *ap;
{
struct vnode *syncvp = ap->a_vp;
struct mount *mp = syncvp->v_mount;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td = ap->a_td;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
int asyncflag;
/*
* We only need to do something if this is a lazy evaluation.
*/
if (ap->a_waitfor != MNT_LAZY)
return (0);
/*
* Move ourselves to the back of the sync list.
*/
vn_syncer_add_to_worklist(syncvp, syncdelay);
/*
* Walk the list of vnodes pushing all that are dirty and
* not already on the sync list.
*/
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mountlist_mtx);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if (vfs_busy(mp, LK_EXCLUSIVE | LK_NOWAIT, &mountlist_mtx, td) != 0) {
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mountlist_mtx);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
return (0);
Unlock mountlist_slock if the mount point was busy (unmount in progress) during the attempt at lazy fsync.
1998-04-15 18:37:49 +00:00
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (vn_start_write(NULL, &mp, V_NOWAIT) != 0) {
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vfs_unbusy(mp, td);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
return (0);
}
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
asyncflag = mp->mnt_flag & MNT_ASYNC;
mp->mnt_flag &= ~MNT_ASYNC;
When the softdep conversion took place, the periodic vfs_msync() from update got lost. This is responsible for ensuring that dirty mmap() pages get periodically written to disk. Without it, long time mmap's might not have their dirty pages written out at all of the system crashes or isn't cleanly shut down. This could be nasty if you've got a long-running writing via mmap(), dirty pages used to get written to disk within 30 seconds or so.
1998-04-16 03:31:26 +00:00
vfs_msync(mp, MNT_NOWAIT);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
VFS_SYNC(mp, MNT_LAZY, ap->a_cred, td);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
if (asyncflag)
mp->mnt_flag |= MNT_ASYNC;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
vn_finished_write(mp);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
vfs_unbusy(mp, td);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
return (0);
}
/*
* The syncer vnode is no referenced.
*/
Staticize.
1998-12-21 23:38:33 +00:00
static int
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
sync_inactive(ap)
struct vop_inactive_args /* {
struct vnode *a_vp;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *a_td;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
} */ *ap;
{
vgone(ap->a_vp);
return (0);
}
/*
* The syncer vnode is no longer needed and is being decommissioned.
Protect vn worklist and vn->v_{clean,dirty}blkhd at splbio(). Get rid of extra LIST_REMOVE() Reviewed by: hsu@FreeBSD.ORG (Jeffrey Hsu), mckusick@McKusick.COM Submitted by: hsu@FreeBSD.ORG (Jeffrey Hsu), dillon@backplane.com ( Matthew Dillon )
1999-02-19 17:36:58 +00:00
*
* Modifications to the worklist must be protected at splbio().
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
*/
Staticize.
1998-12-21 23:38:33 +00:00
static int
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
sync_reclaim(ap)
struct vop_reclaim_args /* {
struct vnode *a_vp;
} */ *ap;
{
struct vnode *vp = ap->a_vp;
Protect vn worklist and vn->v_{clean,dirty}blkhd at splbio(). Get rid of extra LIST_REMOVE() Reviewed by: hsu@FreeBSD.ORG (Jeffrey Hsu), mckusick@McKusick.COM Submitted by: hsu@FreeBSD.ORG (Jeffrey Hsu), dillon@backplane.com ( Matthew Dillon )
1999-02-19 17:36:58 +00:00
int s;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
Protect vn worklist and vn->v_{clean,dirty}blkhd at splbio(). Get rid of extra LIST_REMOVE() Reviewed by: hsu@FreeBSD.ORG (Jeffrey Hsu), mckusick@McKusick.COM Submitted by: hsu@FreeBSD.ORG (Jeffrey Hsu), dillon@backplane.com ( Matthew Dillon )
1999-02-19 17:36:58 +00:00
s = splbio();
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
vp->v_mount->mnt_syncer = NULL;
if (vp->v_flag & VONWORKLST) {
LIST_REMOVE(vp, v_synclist);
vp->v_flag &= ~VONWORKLST;
}
Protect vn worklist and vn->v_{clean,dirty}blkhd at splbio(). Get rid of extra LIST_REMOVE() Reviewed by: hsu@FreeBSD.ORG (Jeffrey Hsu), mckusick@McKusick.COM Submitted by: hsu@FreeBSD.ORG (Jeffrey Hsu), dillon@backplane.com ( Matthew Dillon )
1999-02-19 17:36:58 +00:00
splx(s);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
return (0);
}
/*
* Print out a syncer vnode.
*/
Staticize.
1998-12-21 23:38:33 +00:00
static int
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
sync_print(ap)
struct vop_print_args /* {
struct vnode *a_vp;
} */ *ap;
{
struct vnode *vp = ap->a_vp;
printf("syncer vnode");
if (vp->v_vnlock != NULL)
lockmgr_printinfo(vp->v_vnlock);
printf("\n");
return (0);
}
Introduce the vn_todev(struct vnode*) function, which returns the dev_t corresponding to a VBLK or VCHR node, or NODEV.
1999-07-18 14:30:37 +00:00
/*
Take VBLK devices further out of their missery. This should fix the panic I introduced in my previous commit on this topic.
2000-11-02 21:14:13 +00:00
* extract the dev_t from a VCHR
Introduce the vn_todev(struct vnode*) function, which returns the dev_t corresponding to a VBLK or VCHR node, or NODEV.
1999-07-18 14:30:37 +00:00
*/
dev_t
vn_todev(vp)
struct vnode *vp;
{
Take VBLK devices further out of their missery. This should fix the panic I introduced in my previous commit on this topic.
2000-11-02 21:14:13 +00:00
if (vp->v_type != VCHR)
Introduce the vn_todev(struct vnode*) function, which returns the dev_t corresponding to a VBLK or VCHR node, or NODEV.
1999-07-18 14:30:37 +00:00
return (NODEV);
return (vp->v_rdev);
}
Introduce vn_isdisk(struct vnode *vp) function, and use it to test for diskness.
1999-08-25 12:24:39 +00:00
/*
* Check if vnode represents a disk device
*/
int
Give vn_isdisk() a second argument where it can return a suitable errno. Suggested by: bde
2000-01-10 12:04:27 +00:00
vn_isdisk(vp, errp)
Introduce vn_isdisk(struct vnode *vp) function, and use it to test for diskness.
1999-08-25 12:24:39 +00:00
struct vnode *vp;
Give vn_isdisk() a second argument where it can return a suitable errno. Suggested by: bde
2000-01-10 12:04:27 +00:00
int *errp;
Introduce vn_isdisk(struct vnode *vp) function, and use it to test for diskness.
1999-08-25 12:24:39 +00:00
{
Move extern declaration of dead_vnodeop_p to a .h file. Remove race condition in vn_isdisk().
2000-09-05 21:09:56 +00:00
struct cdevsw *cdevsw;
Take VBLK devices further out of their missery. This should fix the panic I introduced in my previous commit on this topic.
2000-11-02 21:14:13 +00:00
if (vp->v_type != VCHR) {
Give vn_isdisk() a second argument where it can return a suitable errno. Suggested by: bde
2000-01-10 12:04:27 +00:00
if (errp != NULL)
*errp = ENOTBLK;
Introduce vn_isdisk(struct vnode *vp) function, and use it to test for diskness.
1999-08-25 12:24:39 +00:00
return (0);
Give vn_isdisk() a second argument where it can return a suitable errno. Suggested by: bde
2000-01-10 12:04:27 +00:00
}
In vn_isdisk(), check whether vp->v_rdev is NULL. If it is, then return ENXIO (Device not configured). Without this, vn_isdisk() could (and did in the case of lstat() under fdesc) pass a NULL pointer to devsw(), which caused a page fault. Reviewed by: alfred
2000-03-18 01:27:44 +00:00
if (vp->v_rdev == NULL) {
if (errp != NULL)
*errp = ENXIO;
return (0);
}
Move extern declaration of dead_vnodeop_p to a .h file. Remove race condition in vn_isdisk().
2000-09-05 21:09:56 +00:00
cdevsw = devsw(vp->v_rdev);
if (cdevsw == NULL) {
Give vn_isdisk() a second argument where it can return a suitable errno. Suggested by: bde
2000-01-10 12:04:27 +00:00
if (errp != NULL)
*errp = ENXIO;
Introduce vn_isdisk(struct vnode *vp) function, and use it to test for diskness.
1999-08-25 12:24:39 +00:00
return (0);
Give vn_isdisk() a second argument where it can return a suitable errno. Suggested by: bde
2000-01-10 12:04:27 +00:00
}
Move extern declaration of dead_vnodeop_p to a .h file. Remove race condition in vn_isdisk().
2000-09-05 21:09:56 +00:00
if (!(cdevsw->d_flags & D_DISK)) {
Give vn_isdisk() a second argument where it can return a suitable errno. Suggested by: bde
2000-01-10 12:04:27 +00:00
if (errp != NULL)
*errp = ENOTBLK;
Introduce vn_isdisk(struct vnode *vp) function, and use it to test for diskness.
1999-08-25 12:24:39 +00:00
return (0);
Give vn_isdisk() a second argument where it can return a suitable errno. Suggested by: bde
2000-01-10 12:04:27 +00:00
}
if (errp != NULL)
*errp = 0;
Introduce vn_isdisk(struct vnode *vp) function, and use it to test for diskness.
1999-08-25 12:24:39 +00:00
return (1);
}
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
* Free data allocated by namei(); see namei(9) for details.
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
*/
Change NDFREE() from a macro to a function for the time being; the macro version caused intolerable bloat (30k). I'm likely to revisit this with an attempt at a smarter macro. Bloat noticed by: bde
2000-01-08 16:20:06 +00:00
void
NDFREE(ndp, flags)
struct nameidata *ndp;
const uint flags;
{
if (!(flags & NDF_NO_FREE_PNBUF) &&
(ndp->ni_cnd.cn_flags & HASBUF)) {
Remove references to vm_zone.h and switch over to the new uma API. Also, remove maxsockets. If you look carefully you'll notice that the old zone allocator never honored this anyway.
2002-03-20 04:09:59 +00:00
uma_zfree(namei_zone, ndp->ni_cnd.cn_pnbuf);
Change NDFREE() from a macro to a function for the time being; the macro version caused intolerable bloat (30k). I'm likely to revisit this with an attempt at a smarter macro. Bloat noticed by: bde
2000-01-08 16:20:06 +00:00
ndp->ni_cnd.cn_flags &= ~HASBUF;
}
if (!(flags & NDF_NO_DVP_UNLOCK) &&
(ndp->ni_cnd.cn_flags & LOCKPARENT) &&
ndp->ni_dvp != ndp->ni_vp)
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
VOP_UNLOCK(ndp->ni_dvp, 0, ndp->ni_cnd.cn_thread);
Change NDFREE() from a macro to a function for the time being; the macro version caused intolerable bloat (30k). I'm likely to revisit this with an attempt at a smarter macro. Bloat noticed by: bde
2000-01-08 16:20:06 +00:00
if (!(flags & NDF_NO_DVP_RELE) &&
(ndp->ni_cnd.cn_flags & (LOCKPARENT|WANTPARENT))) {
vrele(ndp->ni_dvp);
ndp->ni_dvp = NULL;
}
if (!(flags & NDF_NO_VP_UNLOCK) &&
(ndp->ni_cnd.cn_flags & LOCKLEAF) && ndp->ni_vp)
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
VOP_UNLOCK(ndp->ni_vp, 0, ndp->ni_cnd.cn_thread);
Change NDFREE() from a macro to a function for the time being; the macro version caused intolerable bloat (30k). I'm likely to revisit this with an attempt at a smarter macro. Bloat noticed by: bde
2000-01-08 16:20:06 +00:00
if (!(flags & NDF_NO_VP_RELE) &&
ndp->ni_vp) {
vrele(ndp->ni_vp);
ndp->ni_vp = NULL;
}
if (!(flags & NDF_NO_STARTDIR_RELE) &&
(ndp->ni_cnd.cn_flags & SAVESTART)) {
vrele(ndp->ni_startdir);
ndp->ni_startdir = NULL;
}
}
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
o Add additional comment describing vaccess() behavior. Requested by: eivind Reviewed by: eivind, adrian
2000-09-20 17:18:12 +00:00
/*
* Common file system object access control check routine. Accepts a
* vnode's type, "mode", uid and gid, requested access mode, credentials,
* and optional call-by-reference privused argument allowing vaccess()
* to indicate to the caller whether privilege was used to satisfy the
* request. Returns 0 on success, or an errno on failure.
*/
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
int
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
vaccess(type, file_mode, file_uid, file_gid, acc_mode, cred, privused)
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
enum vtype type;
mode_t file_mode;
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
uid_t file_uid;
gid_t file_gid;
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
mode_t acc_mode;
struct ucred *cred;
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
int *privused;
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
{
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
mode_t dac_granted;
#ifdef CAPABILITIES
mode_t cap_granted;
#endif
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
/*
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
* Look for a normal, non-privileged way to access the file/directory
* as requested. If it exists, go with that.
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
*/
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
if (privused != NULL)
*privused = 0;
dac_granted = 0;
/* Check the owner. */
if (cred->cr_uid == file_uid) {
o Introduce new VOP_ACCESS() flag VADMIN, allowing file systems to perform "administrative" authorization checks. In most cases, the VADMIN test checks to make sure the credential effective uid is the same as the file owner. o Modify vaccess() to set VADMIN as an available right if the uid is appropriate. o Modify references to uid-based access control operations such that they now always invoke VOP_ACCESS() instead of using hard-coded policy checks. o This allows alternative UFS policies to be implemented by replacing only ufs_access() (such as mandatory system policies). o VOP_ACCESS() requires the caller to hold an exclusive vnode lock on the vnode: I believe that new invocations of VOP_ACCESS() are always called with the lock held. o Some direct checks of the uid remain, largely associated with the QUOTA and SUIDDIR code. Reviewed by: eivind Obtained from: TrustedBSD Project
2000-10-19 07:53:59 +00:00
dac_granted |= VADMIN;
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
if (file_mode & S_IXUSR)
dac_granted |= VEXEC;
if (file_mode & S_IRUSR)
dac_granted |= VREAD;
if (file_mode & S_IWUSR)
dac_granted |= VWRITE;
if ((acc_mode & dac_granted) == acc_mode)
return (0);
goto privcheck;
}
/* Otherwise, check the groups (first match) */
if (groupmember(file_gid, cred)) {
if (file_mode & S_IXGRP)
dac_granted |= VEXEC;
if (file_mode & S_IRGRP)
dac_granted |= VREAD;
if (file_mode & S_IWGRP)
dac_granted |= VWRITE;
if ((acc_mode & dac_granted) == acc_mode)
return (0);
goto privcheck;
}
/* Otherwise, check everyone else. */
if (file_mode & S_IXOTH)
dac_granted |= VEXEC;
if (file_mode & S_IROTH)
dac_granted |= VREAD;
if (file_mode & S_IWOTH)
dac_granted |= VWRITE;
if ((acc_mode & dac_granted) == acc_mode)
return (0);
privcheck:
Change the suser() API to take advantage of td_ucred as well as do a general cleanup of the API. The entire API now consists of two functions similar to the pre-KSE API. The suser() function takes a thread pointer as its only argument. The td_ucred member of this thread must be valid so the only valid thread pointers are curthread and a few kernel threads such as thread0. The suser_cred() function takes a pointer to a struct ucred as its first argument and an integer flag as its second argument. The flag is currently only used for the PRISON_ROOT flag. Discussed on: smp@
2002-04-01 21:31:13 +00:00
if (!suser_cred(cred, PRISON_ROOT)) {
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
/* XXX audit: privilege used */
if (privused != NULL)
*privused = 1;
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
return (0);
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
}
#ifdef CAPABILITIES
/*
* Build a capability mask to determine if the set of capabilities
* satisfies the requirements when combined with the granted mask
* from above.
* For each capability, if the capability is required, bitwise
* or the request type onto the cap_granted mask.
*/
cap_granted = 0;
Merge from POSIX.1e Capabilities development tree: o POSIX.1e capabilities authorize overriding of VEXEC for VDIR based on CAP_DAC_READ_SEARCH, but of !VDIR based on CAP_DAC_EXECUTE. Add appropriate conditionals to vaccess() to take that into account. o Synchronization cap_check_xxx() -> cap_check() change. Obtained from: TrustedBSD Project
2001-11-02 15:16:59 +00:00
if (type == VDIR) {
/*
* For directories, use CAP_DAC_READ_SEARCH to satisfy
* VEXEC requests, instead of CAP_DAC_EXECUTE.
*/
if ((acc_mode & VEXEC) && ((dac_granted & VEXEC) == 0) &&
!cap_check(cred, NULL, CAP_DAC_READ_SEARCH, PRISON_ROOT))
cap_granted |= VEXEC;
} else {
if ((acc_mode & VEXEC) && ((dac_granted & VEXEC) == 0) &&
!cap_check(cred, NULL, CAP_DAC_EXECUTE, PRISON_ROOT))
cap_granted |= VEXEC;
}
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
if ((acc_mode & VREAD) && ((dac_granted & VREAD) == 0) &&
Merge from POSIX.1e Capabilities development tree: o POSIX.1e capabilities authorize overriding of VEXEC for VDIR based on CAP_DAC_READ_SEARCH, but of !VDIR based on CAP_DAC_EXECUTE. Add appropriate conditionals to vaccess() to take that into account. o Synchronization cap_check_xxx() -> cap_check() change. Obtained from: TrustedBSD Project
2001-11-02 15:16:59 +00:00
!cap_check(cred, NULL, CAP_DAC_READ_SEARCH, PRISON_ROOT))
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
cap_granted |= VREAD;
if ((acc_mode & VWRITE) && ((dac_granted & VWRITE) == 0) &&
Merge from POSIX.1e Capabilities development tree: o POSIX.1e capabilities authorize overriding of VEXEC for VDIR based on CAP_DAC_READ_SEARCH, but of !VDIR based on CAP_DAC_EXECUTE. Add appropriate conditionals to vaccess() to take that into account. o Synchronization cap_check_xxx() -> cap_check() change. Obtained from: TrustedBSD Project
2001-11-02 15:16:59 +00:00
!cap_check(cred, NULL, CAP_DAC_WRITE, PRISON_ROOT))
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
cap_granted |= VWRITE;
o Introduce new VOP_ACCESS() flag VADMIN, allowing file systems to perform "administrative" authorization checks. In most cases, the VADMIN test checks to make sure the credential effective uid is the same as the file owner. o Modify vaccess() to set VADMIN as an available right if the uid is appropriate. o Modify references to uid-based access control operations such that they now always invoke VOP_ACCESS() instead of using hard-coded policy checks. o This allows alternative UFS policies to be implemented by replacing only ufs_access() (such as mandatory system policies). o VOP_ACCESS() requires the caller to hold an exclusive vnode lock on the vnode: I believe that new invocations of VOP_ACCESS() are always called with the lock held. o Some direct checks of the uid remain, largely associated with the QUOTA and SUIDDIR code. Reviewed by: eivind Obtained from: TrustedBSD Project
2000-10-19 07:53:59 +00:00
if ((acc_mode & VADMIN) && ((dac_granted & VADMIN) == 0) &&
Merge from POSIX.1e Capabilities development tree: o POSIX.1e capabilities authorize overriding of VEXEC for VDIR based on CAP_DAC_READ_SEARCH, but of !VDIR based on CAP_DAC_EXECUTE. Add appropriate conditionals to vaccess() to take that into account. o Synchronization cap_check_xxx() -> cap_check() change. Obtained from: TrustedBSD Project
2001-11-02 15:16:59 +00:00
!cap_check(cred, NULL, CAP_FOWNER, PRISON_ROOT))
o Introduce new VOP_ACCESS() flag VADMIN, allowing file systems to perform "administrative" authorization checks. In most cases, the VADMIN test checks to make sure the credential effective uid is the same as the file owner. o Modify vaccess() to set VADMIN as an available right if the uid is appropriate. o Modify references to uid-based access control operations such that they now always invoke VOP_ACCESS() instead of using hard-coded policy checks. o This allows alternative UFS policies to be implemented by replacing only ufs_access() (such as mandatory system policies). o VOP_ACCESS() requires the caller to hold an exclusive vnode lock on the vnode: I believe that new invocations of VOP_ACCESS() are always called with the lock held. o Some direct checks of the uid remain, largely associated with the QUOTA and SUIDDIR code. Reviewed by: eivind Obtained from: TrustedBSD Project
2000-10-19 07:53:59 +00:00
cap_granted |= VADMIN;
o Synchronize vaccess() capability access control checks with TrustedBSD tree. Obtained from: TrustedBSD Project
2000-09-06 12:18:24 +00:00
if ((acc_mode & (cap_granted | dac_granted)) == acc_mode) {
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
/* XXX audit: privilege used */
if (privused != NULL)
*privused = 1;
return (0);
}
#endif
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
o The move to using VADMIN under vaccess() resulted in some system calls returning EACCES instead of EPERM. This patch modifies vaccess() to return EPERM instead of EACCES if VADMIN is among the requested rights. This affects functions normally limited to the owners of a file, such as chmod(), as EPERM is the error indicating that privilege would allow the operation, rather than a chance in mandatory or discretionary rights. Reported by: bde
2001-01-23 04:15:19 +00:00
return ((acc_mode & VADMIN) ? EPERM : EACCES);
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
}
Move the netexport structure from the fs-specific mountstructure to struct mount. This makes the "struct netexport *" paramter to the vfs_export and vfs_checkexport interface unneeded. Consequently that all non-stacking filesystems can use vfs_stdcheckexp(). At the same time, make it a pointer to a struct netexport in struct mount, so that we can remove the bogus AF_MAX and #include <net/radix.h> from <sys/mount.h>
2001-04-25 07:07:52 +00:00
Reference in New Issue Copy Permalink