freebsd-skq/sys/dev/advansys/advmcode.h

/*-
 * Exported interface to downloadable microcode for AdvanSys SCSI Adapters
 *
 * $FreeBSD$
 *
 * Obtained from:
 *
 * Copyright (c) 1995-1999 Advanced System Products, Inc.
 * All Rights Reserved.
 *   
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that redistributions of source
 * code retain the above copyright notice and this comment without
 * modification.
 */

extern u_int8_t adv_mcode[];
extern u_int16_t adv_mcode_size;
extern u_int32_t adv_mcode_chksum;
Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00			`/*-`
Advanced Systems Inc. SCSI Controller driver and ISA/VL front end. I have only tested the ABP5140 card and only with a single CDROM drive but it seems to work fine. This driver relies on features found only in the SCSI branch so will not work in -current until those changes are brought in. It also doesn't have any error handling code yet. The goal is to use this driver as the development platform for the new generic SCSI layer error recovery/handling code. PCI and EISA front ends will show up as soon as I get my hands on the cards. There are also a few issues in the driver that I need to clear up with AdvanSys before I can suggest sticking one of these cards in your server. 8-) Thanks to AdvanSys for releasing this code under a suitable copyright. Obtained from: Ported from the Linux driver writen by bobf@advansys.com (Bob Frey). 1996-10-07 02:07:07 +00:00			`* Exported interface to downloadable microcode for AdvanSys SCSI Adapters`
			`*`
$Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00			`* $FreeBSD$`
Advanced Systems Inc. SCSI Controller driver and ISA/VL front end. I have only tested the ABP5140 card and only with a single CDROM drive but it seems to work fine. This driver relies on features found only in the SCSI branch so will not work in -current until those changes are brought in. It also doesn't have any error handling code yet. The goal is to use this driver as the development platform for the new generic SCSI layer error recovery/handling code. PCI and EISA front ends will show up as soon as I get my hands on the cards. There are also a few issues in the driver that I need to clear up with AdvanSys before I can suggest sticking one of these cards in your server. 8-) Thanks to AdvanSys for releasing this code under a suitable copyright. Obtained from: Ported from the Linux driver writen by bobf@advansys.com (Bob Frey). 1996-10-07 02:07:07 +00:00			`*`
			`* Obtained from:`
			`*`
adv_pci.c: Update list of supported products. Adjust probe message to include the ASC3030. advansys.c: Fix a long standing bug in the error recovery strategy. In order to keep recovery simple, we freeze the SIMQ, stopping the XPT from submitting new requests. Unfortunately, we also will freeze the SIMQ if bus_dmamap_load blocks or we run out of controller resources. On cards with limited resources it was possible to freeze the SIM a second time and never unfreeze it. Now we more carefully track our exception state so we never freeze the SIMQ more than once. Don't rely on pointers fitting in a 32bit field stored in the per-transaction data structures on the card. Use an index to an array of transaction mapping structures instead. This should allow this driver to work on the Alpha. Deal with the ASC3030 which is almost idistinguishable from the ASC3050. Unfortunately the ASC3030 does not work at Ultra speeds, so if we can't find an eeprom, we must assume that ultra is disabled. The SIIG cards using the 3030 do not have eeproms. As a side effect, we now honor the ultra disable bit in the eeprom if it is present. Don't bother attempting to write corrected eeprom data back to the eeprom. We can function just fine if the data is corrupted and I'd rather not risk messing up the user's eeprom. Modify the interrupt handler to catch latched external bus rests. Dynamically determine the maximum number of S/G elements we can map at a single time. The nature of the firmware interface for these cards makes this value dependent on the number of "queues" the card can support. advlib.c: advlib.h: advmcode.c: advmcode.h: Synchronize with the latest firmware image released in the Linux Advansys driver. 2000-01-14 03:33:38 +00:00			`* Copyright (c) 1995-1999 Advanced System Products, Inc.`
Advanced Systems Inc. SCSI Controller driver and ISA/VL front end. I have only tested the ABP5140 card and only with a single CDROM drive but it seems to work fine. This driver relies on features found only in the SCSI branch so will not work in -current until those changes are brought in. It also doesn't have any error handling code yet. The goal is to use this driver as the development platform for the new generic SCSI layer error recovery/handling code. PCI and EISA front ends will show up as soon as I get my hands on the cards. There are also a few issues in the driver that I need to clear up with AdvanSys before I can suggest sticking one of these cards in your server. 8-) Thanks to AdvanSys for releasing this code under a suitable copyright. Obtained from: Ported from the Linux driver writen by bobf@advansys.com (Bob Frey). 1996-10-07 02:07:07 +00:00			`* All Rights Reserved.`
			`*`
			`* Redistribution and use in source and binary forms, with or without`
			`* modification, are permitted provided that redistributions of source`
			`* code retain the above copyright notice and this comment without`
			`* modification.`
			`*/`

Make the extern for adv_mcode match the reality: it's u_int8_t, but probably unendiansafely used as u_int16_t. 2004-03-10 20:52:47 +00:00			`extern u_int8_t adv_mcode[];`
Advanced Systems Inc. SCSI Controller driver and ISA/VL front end. I have only tested the ABP5140 card and only with a single CDROM drive but it seems to work fine. This driver relies on features found only in the SCSI branch so will not work in -current until those changes are brought in. It also doesn't have any error handling code yet. The goal is to use this driver as the development platform for the new generic SCSI layer error recovery/handling code. PCI and EISA front ends will show up as soon as I get my hands on the cards. There are also a few issues in the driver that I need to clear up with AdvanSys before I can suggest sticking one of these cards in your server. 8-) Thanks to AdvanSys for releasing this code under a suitable copyright. Obtained from: Ported from the Linux driver writen by bobf@advansys.com (Bob Frey). 1996-10-07 02:07:07 +00:00			`extern u_int16_t adv_mcode_size;`
			`extern u_int32_t adv_mcode_chksum;`