freebsd-skq/sys/i386/include/cpufunc.h

819 lines
15 KiB
C
Raw Normal View History

1994-08-02 07:55:43 +00:00
/*-
* Copyright (c) 1993 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
1999-08-28 01:08:13 +00:00
* $FreeBSD$
1994-08-02 07:55:43 +00:00
*/
1993-06-12 14:58:17 +00:00
/*
* Functions to provide access to special i386 instructions.
* This in included in sys/systm.h, and that file should be
* used in preference to this.
1993-06-12 14:58:17 +00:00
*/
#ifndef _MACHINE_CPUFUNC_H_
#define _MACHINE_CPUFUNC_H_
#ifndef _SYS_CDEFS_H_
#error this file needs sys/cdefs.h as a prerequisite
#endif
#ifdef XEN
extern void xen_cli(void);
extern void xen_sti(void);
extern u_int xen_rcr2(void);
extern void xen_load_cr3(u_int data);
extern void xen_tlb_flush(void);
extern void xen_invlpg(u_int addr);
extern void write_eflags(u_int eflags);
extern u_int read_eflags(void);
#endif
struct region_descriptor;
#define readb(va) (*(volatile uint8_t *) (va))
#define readw(va) (*(volatile uint16_t *) (va))
#define readl(va) (*(volatile uint32_t *) (va))
#define writeb(va, d) (*(volatile uint8_t *) (va) = (d))
#define writew(va, d) (*(volatile uint16_t *) (va) = (d))
#define writel(va, d) (*(volatile uint32_t *) (va) = (d))
#if defined(__GNUCLIKE_ASM) && defined(__CC_SUPPORTS___INLINE)
1993-06-12 14:58:17 +00:00
static __inline void
breakpoint(void)
{
__asm __volatile("int $3");
}
static __inline u_int
bsfl(u_int mask)
{
u_int result;
__asm("bsfl %1,%0" : "=r" (result) : "rm" (mask) : "cc");
return (result);
}
static __inline u_int
bsrl(u_int mask)
{
u_int result;
__asm("bsrl %1,%0" : "=r" (result) : "rm" (mask) : "cc");
return (result);
}
static __inline void
clflush(u_long addr)
{
__asm __volatile("clflush %0" : : "m" (*(char *)addr));
}
static __inline void
clts(void)
{
__asm __volatile("clts");
}
static __inline void
disable_intr(void)
{
#ifdef XEN
xen_cli();
#else
__asm __volatile("cli" : : : "memory");
#endif
}
static __inline void
do_cpuid(u_int ax, u_int *p)
{
__asm __volatile("cpuid"
: "=a" (p[0]), "=b" (p[1]), "=c" (p[2]), "=d" (p[3])
: "0" (ax));
}
static __inline void
cpuid_count(u_int ax, u_int cx, u_int *p)
{
__asm __volatile("cpuid"
: "=a" (p[0]), "=b" (p[1]), "=c" (p[2]), "=d" (p[3])
: "0" (ax), "c" (cx));
}
static __inline void
enable_intr(void)
{
#ifdef XEN
xen_sti();
#else
__asm __volatile("sti");
#endif
}
static __inline void
cpu_monitor(const void *addr, u_long extensions, u_int hints)
{
__asm __volatile("monitor"
: : "a" (addr), "c" (extensions), "d" (hints));
}
static __inline void
cpu_mwait(u_long extensions, u_int hints)
{
__asm __volatile("mwait" : : "a" (hints), "c" (extensions));
}
2012-08-01 17:24:53 +00:00
static __inline void
lfence(void)
{
__asm __volatile("lfence" : : : "memory");
}
static __inline void
mfence(void)
{
__asm __volatile("mfence" : : : "memory");
}
#ifdef _KERNEL
#define HAVE_INLINE_FFS
static __inline int
ffs(int mask)
{
/*
* Note that gcc-2's builtin ffs would be used if we didn't declare
* this inline or turn off the builtin. The builtin is faster but
* broken in gcc-2.4.5 and slower but working in gcc-2.5 and later
* versions.
*/
return (mask == 0 ? mask : (int)bsfl((u_int)mask) + 1);
}
#define HAVE_INLINE_FFSL
static __inline int
ffsl(long mask)
{
return (ffs((int)mask));
}
#define HAVE_INLINE_FLS
static __inline int
fls(int mask)
{
return (mask == 0 ? mask : (int)bsrl((u_int)mask) + 1);
}
#define HAVE_INLINE_FLSL
static __inline int
flsl(long mask)
{
return (fls((int)mask));
}
#endif /* _KERNEL */
static __inline void
halt(void)
{
__asm __volatile("hlt");
}
static __inline u_char
inb(u_int port)
{
u_char data;
__asm __volatile("inb %w1, %0" : "=a" (data) : "Nd" (port));
return (data);
}
static __inline u_int
inl(u_int port)
{
u_int data;
__asm __volatile("inl %w1, %0" : "=a" (data) : "Nd" (port));
return (data);
}
static __inline void
insb(u_int port, void *addr, size_t count)
{
__asm __volatile("cld; rep; insb"
: "+D" (addr), "+c" (count)
: "d" (port)
: "memory");
}
static __inline void
insw(u_int port, void *addr, size_t count)
{
__asm __volatile("cld; rep; insw"
: "+D" (addr), "+c" (count)
: "d" (port)
: "memory");
}
static __inline void
insl(u_int port, void *addr, size_t count)
{
__asm __volatile("cld; rep; insl"
: "+D" (addr), "+c" (count)
: "d" (port)
: "memory");
}
static __inline void
invd(void)
{
__asm __volatile("invd");
}
static __inline u_short
inw(u_int port)
{
u_short data;
__asm __volatile("inw %w1, %0" : "=a" (data) : "Nd" (port));
return (data);
}
static __inline void
outb(u_int port, u_char data)
1993-06-12 14:58:17 +00:00
{
__asm __volatile("outb %0, %w1" : : "a" (data), "Nd" (port));
}
1993-06-12 14:58:17 +00:00
static __inline void
outl(u_int port, u_int data)
{
__asm __volatile("outl %0, %w1" : : "a" (data), "Nd" (port));
1993-06-12 14:58:17 +00:00
}
static __inline void
outsb(u_int port, const void *addr, size_t count)
1993-06-12 14:58:17 +00:00
{
__asm __volatile("cld; rep; outsb"
: "+S" (addr), "+c" (count)
: "d" (port));
1993-06-12 14:58:17 +00:00
}
static __inline void
outsw(u_int port, const void *addr, size_t count)
1993-06-12 14:58:17 +00:00
{
__asm __volatile("cld; rep; outsw"
: "+S" (addr), "+c" (count)
: "d" (port));
1993-06-12 14:58:17 +00:00
}
static __inline void
outsl(u_int port, const void *addr, size_t count)
1993-06-12 14:58:17 +00:00
{
__asm __volatile("cld; rep; outsl"
: "+S" (addr), "+c" (count)
: "d" (port));
1993-06-12 14:58:17 +00:00
}
static __inline void
outw(u_int port, u_short data)
1993-06-12 14:58:17 +00:00
{
__asm __volatile("outw %0, %w1" : : "a" (data), "Nd" (port));
1993-06-12 14:58:17 +00:00
}
static __inline void
ia32_pause(void)
{
__asm __volatile("pause");
}
static __inline u_int
#ifdef XEN
_read_eflags(void)
#else
read_eflags(void)
#endif
{
u_int ef;
1995-05-30 08:16:23 +00:00
__asm __volatile("pushfl; popl %0" : "=r" (ef));
return (ef);
}
static __inline uint64_t
rdmsr(u_int msr)
{
uint64_t rv;
__asm __volatile("rdmsr" : "=A" (rv) : "c" (msr));
return (rv);
}
static __inline uint64_t
rdpmc(u_int pmc)
{
uint64_t rv;
__asm __volatile("rdpmc" : "=A" (rv) : "c" (pmc));
return (rv);
}
static __inline uint64_t
rdtsc(void)
{
uint64_t rv;
__asm __volatile("rdtsc" : "=A" (rv));
return (rv);
}
static __inline uint32_t
rdtsc32(void)
{
uint32_t rv;
__asm __volatile("rdtsc" : "=a" (rv) : : "edx");
return (rv);
}
static __inline void
wbinvd(void)
{
__asm __volatile("wbinvd");
}
static __inline void
#ifdef XEN
_write_eflags(u_int ef)
#else
write_eflags(u_int ef)
#endif
{
__asm __volatile("pushl %0; popfl" : : "r" (ef));
}
static __inline void
wrmsr(u_int msr, uint64_t newval)
{
__asm __volatile("wrmsr" : : "A" (newval), "c" (msr));
}
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
static __inline void
load_cr0(u_int data)
{
__asm __volatile("movl %0,%%cr0" : : "r" (data));
}
static __inline u_int
rcr0(void)
{
u_int data;
__asm __volatile("movl %%cr0,%0" : "=r" (data));
return (data);
}
static __inline u_int
rcr2(void)
{
u_int data;
#ifdef XEN
return (xen_rcr2());
#endif
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
__asm __volatile("movl %%cr2,%0" : "=r" (data));
return (data);
}
static __inline void
load_cr3(u_int data)
{
#ifdef XEN
xen_load_cr3(data);
#else
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
__asm __volatile("movl %0,%%cr3" : : "r" (data) : "memory");
#endif
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
}
static __inline u_int
rcr3(void)
{
u_int data;
__asm __volatile("movl %%cr3,%0" : "=r" (data));
return (data);
}
static __inline void
load_cr4(u_int data)
{
__asm __volatile("movl %0,%%cr4" : : "r" (data));
}
static __inline u_int
rcr4(void)
{
u_int data;
__asm __volatile("movl %%cr4,%0" : "=r" (data));
return (data);
}
static __inline uint64_t
rxcr(u_int reg)
{
u_int low, high;
__asm __volatile("xgetbv" : "=a" (low), "=d" (high) : "c" (reg));
return (low | ((uint64_t)high << 32));
}
static __inline void
load_xcr(u_int reg, uint64_t val)
{
u_int low, high;
low = val;
high = val >> 32;
__asm __volatile("xsetbv" : : "c" (reg), "a" (low), "d" (high));
}
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
/*
* Global TLB flush (except for thise for pages marked PG_G)
*/
static __inline void
invltlb(void)
{
#ifdef XEN
xen_tlb_flush();
#else
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
load_cr3(rcr3());
#endif
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
}
/*
* TLB flush for an individual page (even if it has PG_G).
* Only works on 486+ CPUs (i386 does not have PG_G).
*/
static __inline void
invlpg(u_int addr)
{
#ifdef XEN
xen_invlpg(addr);
#else
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
__asm __volatile("invlpg %0" : : "m" (*(char *)addr) : "memory");
#endif
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
}
static __inline u_short
rfs(void)
{
u_short sel;
__asm __volatile("movw %%fs,%0" : "=rm" (sel));
return (sel);
}
static __inline uint64_t
rgdt(void)
{
uint64_t gdtr;
__asm __volatile("sgdt %0" : "=m" (gdtr));
return (gdtr);
}
static __inline u_short
rgs(void)
{
u_short sel;
__asm __volatile("movw %%gs,%0" : "=rm" (sel));
return (sel);
}
static __inline uint64_t
ridt(void)
{
uint64_t idtr;
__asm __volatile("sidt %0" : "=m" (idtr));
return (idtr);
}
static __inline u_short
rldt(void)
{
u_short ldtr;
__asm __volatile("sldt %0" : "=g" (ldtr));
return (ldtr);
}
static __inline u_short
rss(void)
{
u_short sel;
__asm __volatile("movw %%ss,%0" : "=rm" (sel));
return (sel);
}
static __inline u_short
rtr(void)
{
u_short tr;
__asm __volatile("str %0" : "=g" (tr));
return (tr);
}
static __inline void
load_fs(u_short sel)
{
__asm __volatile("movw %0,%%fs" : : "rm" (sel));
}
static __inline void
load_gs(u_short sel)
{
__asm __volatile("movw %0,%%gs" : : "rm" (sel));
}
static __inline void
lidt(struct region_descriptor *addr)
{
__asm __volatile("lidt (%0)" : : "r" (addr));
}
static __inline void
lldt(u_short sel)
{
__asm __volatile("lldt %0" : : "r" (sel));
}
static __inline void
ltr(u_short sel)
{
__asm __volatile("ltr %0" : : "r" (sel));
}
static __inline u_int
rdr0(void)
{
u_int data;
__asm __volatile("movl %%dr0,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr0(u_int dr0)
{
__asm __volatile("movl %0,%%dr0" : : "r" (dr0));
}
static __inline u_int
rdr1(void)
{
u_int data;
__asm __volatile("movl %%dr1,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr1(u_int dr1)
{
__asm __volatile("movl %0,%%dr1" : : "r" (dr1));
}
static __inline u_int
rdr2(void)
{
u_int data;
__asm __volatile("movl %%dr2,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr2(u_int dr2)
{
__asm __volatile("movl %0,%%dr2" : : "r" (dr2));
}
static __inline u_int
rdr3(void)
{
u_int data;
__asm __volatile("movl %%dr3,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr3(u_int dr3)
{
__asm __volatile("movl %0,%%dr3" : : "r" (dr3));
}
static __inline u_int
rdr4(void)
{
u_int data;
__asm __volatile("movl %%dr4,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr4(u_int dr4)
{
__asm __volatile("movl %0,%%dr4" : : "r" (dr4));
}
static __inline u_int
rdr5(void)
{
u_int data;
__asm __volatile("movl %%dr5,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr5(u_int dr5)
{
__asm __volatile("movl %0,%%dr5" : : "r" (dr5));
}
static __inline u_int
rdr6(void)
{
u_int data;
__asm __volatile("movl %%dr6,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr6(u_int dr6)
{
__asm __volatile("movl %0,%%dr6" : : "r" (dr6));
}
static __inline u_int
rdr7(void)
{
u_int data;
__asm __volatile("movl %%dr7,%0" : "=r" (data));
return (data);
}
static __inline void
load_dr7(u_int dr7)
{
__asm __volatile("movl %0,%%dr7" : : "r" (dr7));
}
static __inline u_char
read_cyrix_reg(u_char reg)
{
outb(0x22, reg);
return inb(0x23);
}
static __inline void
write_cyrix_reg(u_char reg, u_char data)
{
outb(0x22, reg);
outb(0x23, data);
}
static __inline register_t
intr_disable(void)
{
register_t eflags;
eflags = read_eflags();
disable_intr();
return (eflags);
}
static __inline void
intr_restore(register_t eflags)
{
write_eflags(eflags);
}
#else /* !(__GNUCLIKE_ASM && __CC_SUPPORTS___INLINE) */
1993-06-12 14:58:17 +00:00
int breakpoint(void);
u_int bsfl(u_int mask);
u_int bsrl(u_int mask);
void clflush(u_long addr);
void clts(void);
void cpuid_count(u_int ax, u_int cx, u_int *p);
void disable_intr(void);
void do_cpuid(u_int ax, u_int *p);
void enable_intr(void);
void halt(void);
void ia32_pause(void);
u_char inb(u_int port);
u_int inl(u_int port);
void insb(u_int port, void *addr, size_t count);
void insl(u_int port, void *addr, size_t count);
void insw(u_int port, void *addr, size_t count);
register_t intr_disable(void);
void intr_restore(register_t ef);
void invd(void);
void invlpg(u_int addr);
void invltlb(void);
u_short inw(u_int port);
void lidt(struct region_descriptor *addr);
void lldt(u_short sel);
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
void load_cr0(u_int cr0);
void load_cr3(u_int cr3);
void load_cr4(u_int cr4);
void load_dr0(u_int dr0);
void load_dr1(u_int dr1);
void load_dr2(u_int dr2);
void load_dr3(u_int dr3);
void load_dr4(u_int dr4);
void load_dr5(u_int dr5);
void load_dr6(u_int dr6);
void load_dr7(u_int dr7);
void load_fs(u_short sel);
void load_gs(u_short sel);
void ltr(u_short sel);
void outb(u_int port, u_char data);
void outl(u_int port, u_int data);
void outsb(u_int port, const void *addr, size_t count);
void outsl(u_int port, const void *addr, size_t count);
void outsw(u_int port, const void *addr, size_t count);
void outw(u_int port, u_short data);
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
u_int rcr0(void);
u_int rcr2(void);
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
u_int rcr3(void);
u_int rcr4(void);
uint64_t rdmsr(u_int msr);
uint64_t rdpmc(u_int pmc);
u_int rdr0(void);
u_int rdr1(void);
u_int rdr2(void);
u_int rdr3(void);
u_int rdr4(void);
u_int rdr5(void);
u_int rdr6(void);
u_int rdr7(void);
uint64_t rdtsc(void);
u_char read_cyrix_reg(u_char reg);
u_int read_eflags(void);
u_int rfs(void);
uint64_t rgdt(void);
u_int rgs(void);
uint64_t ridt(void);
u_short rldt(void);
u_short rtr(void);
void wbinvd(void);
void write_cyrix_reg(u_char reg, u_char data);
void write_eflags(u_int ef);
void wrmsr(u_int msr, uint64_t newval);
#endif /* __GNUCLIKE_ASM && __CC_SUPPORTS___INLINE */
1993-06-12 14:58:17 +00:00
2002-03-20 05:48:58 +00:00
void reset_dbregs(void);
#ifdef _KERNEL
int rdmsr_safe(u_int msr, uint64_t *val);
int wrmsr_safe(u_int msr, uint64_t newval);
#endif
#endif /* !_MACHINE_CPUFUNC_H_ */