d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8496708649
freebsd-skq/sys/kern/kern_rwlock.c

1032 lines
28 KiB
C
Raw Normal View History

Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
/*-
* Copyright (c) 2006 John Baldwin <jhb@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Machine independent bits of reader/writer lock implementation.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ddb.h"
- Simplify the #ifdef's for adaptive mutexes and rwlocks by conditionally defining a macro earlier in the file. - Add NO_ADAPTIVE_RWLOCKS option to disable adaptive spinning for rwlocks.
2007-03-22 16:09:23 +00:00
#include "opt_no_adaptive_rwlocks.h"
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#include <sys/param.h>
#include <sys/ktr.h>
- Add sysctls at debug.rwlock to control the behavior of the speculative spinning when readers hold a lock. This spinning is speculative because, unlike the write case, we can not test whether the owners are running. - Add speculative read spinning for readers who are blocked by pending writers while a read lock is still held. This allows the thread to spin until the write lock succeeds after which it may spin until the writer has released the lock. This prevents excessive context switches when readers and writers both hold the lock for brief periods. Sponsored by: Nokia
2008-04-04 10:00:46 +00:00
#include <sys/kernel.h>
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/proc.h>
#include <sys/rwlock.h>
- Add sysctls at debug.rwlock to control the behavior of the speculative spinning when readers hold a lock. This spinning is speculative because, unlike the write case, we can not test whether the owners are running. - Add speculative read spinning for readers who are blocked by pending writers while a read lock is still held. This allows the thread to spin until the write lock succeeds after which it may spin until the writer has released the lock. This prevents excessive context switches when readers and writers both hold the lock for brief periods. Sponsored by: Nokia
2008-04-04 10:00:46 +00:00
#include <sys/sysctl.h>
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#include <sys/systm.h>
#include <sys/turnstile.h>
Fix some problems with lock profiling in rw locks: - Adjust lock_profiling stubs semantic in the hard functions in order to be more accurate and trustable - As for sx locks, disable shared paths for lock_profiling. Actually, lock_profiling has a subtle race which makes results caming from shared paths not completely trustable. A macro stub (LOCK_PROFILING_SHARED) can be actually used for re-enabling this paths, but is currently intended for developing use only. - style(9) fixes Approved by: jeff, kmacy, jhb[1] Approved by: re [1] Had initial reservations not shared by others, conceded in the end.
2007-07-20 08:43:42 +00:00
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#include <machine/cpu.h>
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
CTASSERT((RW_RECURSE & LO_CLASSFLAGS) == RW_RECURSE);
- Simplify the #ifdef's for adaptive mutexes and rwlocks by conditionally defining a macro earlier in the file. - Add NO_ADAPTIVE_RWLOCKS option to disable adaptive spinning for rwlocks.
2007-03-22 16:09:23 +00:00
#if defined(SMP) && !defined(NO_ADAPTIVE_RWLOCKS)
#define ADAPTIVE_RWLOCKS
#endif
- Add sysctls at debug.rwlock to control the behavior of the speculative spinning when readers hold a lock. This spinning is speculative because, unlike the write case, we can not test whether the owners are running. - Add speculative read spinning for readers who are blocked by pending writers while a read lock is still held. This allows the thread to spin until the write lock succeeds after which it may spin until the writer has released the lock. This prevents excessive context switches when readers and writers both hold the lock for brief periods. Sponsored by: Nokia
2008-04-04 10:00:46 +00:00
#ifdef ADAPTIVE_RWLOCKS
static int rowner_retries = 10;
static int rowner_loops = 10000;
SYSCTL_NODE(_debug, OID_AUTO, rwlock, CTLFLAG_RD, NULL, "rwlock debugging");
SYSCTL_INT(_debug_rwlock, OID_AUTO, retry, CTLFLAG_RW, &rowner_retries, 0, "");
SYSCTL_INT(_debug_rwlock, OID_AUTO, loops, CTLFLAG_RW, &rowner_loops, 0, "");
#endif
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#ifdef DDB
#include <ddb/ddb.h>
static void db_show_rwlock(struct lock_object *lock);
#endif
Expand lock class with the "virtual" function lc_assert which will offer an unified way for all the lock primitives to express lock assertions. Currenty, lockmgrs and rmlocks don't have assertions, so just panic in that case. This will be a base for more callout improvements. Ok'ed by: jhb, jeff
2007-11-18 14:43:53 +00:00
static void assert_rw(struct lock_object *lock, int what);
Add two new function pointers 'lc_lock' and 'lc_unlock' to lock classes. These functions are intended to be used to drop a lock and then reacquire it when doing an sleep such as msleep(9). Both functions accept a 'struct lock_object *' as their first parameter. The 'lc_unlock' function returns an integer that is then passed as the second paramter to the subsequent 'lc_lock' function. This can be used to communicate state. For example, sx locks and rwlocks use this to indicate if the lock was share/read locked vs exclusive/write locked. Currently, spin mutexes and lockmgr locks do not provide working lc_lock and lc_unlock functions.
2007-03-09 16:27:11 +00:00
static void lock_rw(struct lock_object *lock, int how);
static int unlock_rw(struct lock_object *lock);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
struct lock_class lock_class_rw = {
Use C99-style struct member initialization for lock classes.
2007-03-09 16:04:44 +00:00
.lc_name = "rw",
.lc_flags = LC_SLEEPLOCK | LC_RECURSABLE | LC_UPGRADABLE,
Expand lock class with the "virtual" function lc_assert which will offer an unified way for all the lock primitives to express lock assertions. Currenty, lockmgrs and rmlocks don't have assertions, so just panic in that case. This will be a base for more callout improvements. Ok'ed by: jhb, jeff
2007-11-18 14:43:53 +00:00
.lc_assert = assert_rw,
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#ifdef DDB
Use C99-style struct member initialization for lock classes.
2007-03-09 16:04:44 +00:00
.lc_ddb_show = db_show_rwlock,
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#endif
Add two new function pointers 'lc_lock' and 'lc_unlock' to lock classes. These functions are intended to be used to drop a lock and then reacquire it when doing an sleep such as msleep(9). Both functions accept a 'struct lock_object *' as their first parameter. The 'lc_unlock' function returns an integer that is then passed as the second paramter to the subsequent 'lc_lock' function. This can be used to communicate state. For example, sx locks and rwlocks use this to indicate if the lock was share/read locked vs exclusive/write locked. Currently, spin mutexes and lockmgr locks do not provide working lc_lock and lc_unlock functions.
2007-03-09 16:27:11 +00:00
.lc_lock = lock_rw,
.lc_unlock = unlock_rw,
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
};
- Add a rw_wowner() macro that just returns the owner of a write lock and use it in places that only care about the write owner instead of rw_owner() as a baby step towards limited read-lock owner. - Tidy the code that sets the WAITER flag bits to not duplicate a test around the atomic operation and the KTR trace in both of the lock functions.
2006-04-17 21:11:01 +00:00
/*
* Return a pointer to the owning thread if the lock is write-locked or
* NULL if the lock is unlocked or read-locked.
*/
#define rw_wowner(rw) \
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
((rw)->rw_lock & RW_LOCK_READ ? NULL : \
(struct thread *)RW_OWNER((rw)->rw_lock))
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
/*
* Returns if a write owner is recursed. Write ownership is not assured
* here and should be previously checked.
*/
#define rw_recursed(rw) ((rw)->rw_recurse != 0)
/*
* Return true if curthread helds the lock.
*/
#define rw_wlocked(rw) (rw_wowner((rw)) == curthread)
- Add a rw_wowner() macro that just returns the owner of a write lock and use it in places that only care about the write owner instead of rw_owner() as a baby step towards limited read-lock owner. - Tidy the code that sets the WAITER flag bits to not duplicate a test around the atomic operation and the KTR trace in both of the lock functions.
2006-04-17 21:11:01 +00:00
/*
* Return a pointer to the owning thread for this lock who should receive
* any priority lent by threads that block on this lock. Currently this
* is identical to rw_wowner().
*/
#define rw_owner(rw) rw_wowner(rw)
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#ifndef INVARIANTS
#define _rw_assert(rw, what, file, line)
#endif
Expand lock class with the "virtual" function lc_assert which will offer an unified way for all the lock primitives to express lock assertions. Currenty, lockmgrs and rmlocks don't have assertions, so just panic in that case. This will be a base for more callout improvements. Ok'ed by: jhb, jeff
2007-11-18 14:43:53 +00:00
void
assert_rw(struct lock_object *lock, int what)
{
rw_assert((struct rwlock *)lock, what);
}
Add two new function pointers 'lc_lock' and 'lc_unlock' to lock classes. These functions are intended to be used to drop a lock and then reacquire it when doing an sleep such as msleep(9). Both functions accept a 'struct lock_object *' as their first parameter. The 'lc_unlock' function returns an integer that is then passed as the second paramter to the subsequent 'lc_lock' function. This can be used to communicate state. For example, sx locks and rwlocks use this to indicate if the lock was share/read locked vs exclusive/write locked. Currently, spin mutexes and lockmgr locks do not provide working lc_lock and lc_unlock functions.
2007-03-09 16:27:11 +00:00
void
lock_rw(struct lock_object *lock, int how)
{
struct rwlock *rw;
rw = (struct rwlock *)lock;
if (how)
rw_wlock(rw);
else
rw_rlock(rw);
}
int
unlock_rw(struct lock_object *lock)
{
struct rwlock *rw;
rw = (struct rwlock *)lock;
rw_assert(rw, RA_LOCKED | LA_NOTRECURSED);
if (rw->rw_lock & RW_LOCK_READ) {
rw_runlock(rw);
return (0);
} else {
rw_wunlock(rw);
return (1);
}
}
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
void
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
rw_init_flags(struct rwlock *rw, const char *name, int opts)
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
{
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
int flags;
MPASS((opts & ~(RW_DUPOK | RW_NOPROFILE | RW_NOWITNESS | RW_QUIET |
RW_RECURSE)) == 0);
flags = LO_UPGRADABLE | LO_RECURSABLE;
if (opts & RW_DUPOK)
flags |= LO_DUPOK;
if (opts & RW_NOPROFILE)
flags |= LO_NOPROFILE;
if (!(opts & RW_NOWITNESS))
flags |= LO_WITNESS;
if (opts & RW_QUIET)
flags |= LO_QUIET;
flags |= opts & RW_RECURSE;
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
rw->rw_lock = RW_UNLOCKED;
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
rw->rw_recurse = 0;
lock_init(&rw->lock_object, &lock_class_rw, name, NULL, flags);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
}
void
rw_destroy(struct rwlock *rw)
{
KASSERT(rw->rw_lock == RW_UNLOCKED, ("rw lock not unlocked"));
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
KASSERT(rw->rw_recurse == 0, ("rw lock still recursed"));
Add destroyed cookie values for sx locks and rwlocks as well as extra KASSERTs so that any lock operations on a destroyed lock will panic or hang.
2007-05-08 21:51:37 +00:00
rw->rw_lock = RW_DESTROYED;
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
lock_destroy(&rw->lock_object);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
}
void
rw_sysinit(void *arg)
{
struct rw_args *args = arg;
rw_init(args->ra_rw, args->ra_desc);
}
Add rw_wowned() interface to rwlock(9), allowing a kernel thread to determine if it holds an exclusive rwlock reference or not. This is non-ideal, but recursion scenarios in the network stack currently require it. Approved by: jhb
2007-02-26 19:05:13 +00:00
int
rw_wowned(struct rwlock *rw)
{
return (rw_wowner(rw) == curthread);
}
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
void
_rw_wlock(struct rwlock *rw, const char *file, int line)
{
MPASS(curthread != NULL);
Add destroyed cookie values for sx locks and rwlocks as well as extra KASSERTs so that any lock operations on a destroyed lock will panic or hang.
2007-05-08 21:51:37 +00:00
KASSERT(rw->rw_lock != RW_DESTROYED,
("rw_wlock() of destroyed rwlock @ %s:%d", file, line));
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
WITNESS_CHECKORDER(&rw->lock_object, LOP_NEWORDER | LOP_EXCLUSIVE, file,
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
line);
__rw_wlock(rw, curthread, file, line);
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
LOCK_LOG_LOCK("WLOCK", &rw->lock_object, 0, rw->rw_recurse, file, line);
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
WITNESS_LOCK(&rw->lock_object, LOP_EXCLUSIVE, file, line);
Adjust td_locks for non-spin mutexes, rwlocks, and sx locks so that it is a count of all non-spin locks, not just lockmgr locks. This can give us a much cheaper way to see if we have any locks held (such as when returning to userland via userret()) without requiring WITNESS. MFC after: 1 week
2006-07-27 21:45:55 +00:00
curthread->td_locks++;
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
}
Add rw_try_rlock() and rw_try_wlock() to rwlocks. These functions try the specified operation (rlocking and wlocking) and true is returned if the operation completes, false otherwise. The KPI is enriched by this commit, so __FreeBSD_version bumping and manpage updating will happen soon. Requested by: jeff, kris
2008-04-01 20:31:55 +00:00
int
_rw_try_wlock(struct rwlock *rw, const char *file, int line)
{
int rval;
KASSERT(rw->rw_lock != RW_DESTROYED,
("rw_try_wlock() of destroyed rwlock @ %s:%d", file, line));
if (rw_wlocked(rw) && (rw->lock_object.lo_flags & RW_RECURSE) != 0) {
rw->rw_recurse++;
rval = 1;
} else
rval = atomic_cmpset_acq_ptr(&rw->rw_lock, RW_UNLOCKED,
(uintptr_t)curthread);
LOCK_LOG_TRY("WLOCK", &rw->lock_object, 0, rval, file, line);
if (rval) {
WITNESS_LOCK(&rw->lock_object, LOP_EXCLUSIVE | LOP_TRYLOCK,
file, line);
curthread->td_locks++;
}
return (rval);
}
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
void
_rw_wunlock(struct rwlock *rw, const char *file, int line)
{
MPASS(curthread != NULL);
Add destroyed cookie values for sx locks and rwlocks as well as extra KASSERTs so that any lock operations on a destroyed lock will panic or hang.
2007-05-08 21:51:37 +00:00
KASSERT(rw->rw_lock != RW_DESTROYED,
("rw_wunlock() of destroyed rwlock @ %s:%d", file, line));
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
_rw_assert(rw, RA_WLOCKED, file, line);
Adjust td_locks for non-spin mutexes, rwlocks, and sx locks so that it is a count of all non-spin locks, not just lockmgr locks. This can give us a much cheaper way to see if we have any locks held (such as when returning to userland via userret()) without requiring WITNESS. MFC after: 1 week
2006-07-27 21:45:55 +00:00
curthread->td_locks--;
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
WITNESS_UNLOCK(&rw->lock_object, LOP_EXCLUSIVE, file, line);
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
LOCK_LOG_LOCK("WUNLOCK", &rw->lock_object, 0, rw->rw_recurse, file,
line);
if (!rw_recursed(rw))
lock_profile_release_lock(&rw->lock_object);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
__rw_wunlock(rw, curthread, file, line);
}
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
/*
* Determines whether a new reader can acquire a lock. Succeeds if the
* reader already owns a read lock and the lock is locked for read to
* prevent deadlock from reader recursion. Also succeeds if the lock
* is unlocked and has no writer waiters or spinners. Failing otherwise
* prioritizes writers before readers.
*/
#define RW_CAN_READ(_rw) \
((curthread->td_rw_rlocks && (_rw) & RW_LOCK_READ) || ((_rw) & \
(RW_LOCK_READ | RW_LOCK_WRITE_WAITERS | RW_LOCK_WRITE_SPINNER)) == \
RW_LOCK_READ)
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
void
_rw_rlock(struct rwlock *rw, const char *file, int line)
{
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
struct turnstile *ts;
- Simplify the #ifdef's for adaptive mutexes and rwlocks by conditionally defining a macro earlier in the file. - Add NO_ADAPTIVE_RWLOCKS option to disable adaptive spinning for rwlocks.
2007-03-22 16:09:23 +00:00
#ifdef ADAPTIVE_RWLOCKS
Adaptively spin before blocking on the turnstile if an rwlock is write locked. In general the adaptive spinning is similar to the same code for mutexes with some extra trickiness in rw_wunlock_hard(). Specifically, even though both wait bits might be set and we might have a turnstile with at least one waiting thread, there might not be any threads blocked on the queue we are not waking up (they might all be spinning), and we should only preserve the waiting flag for the queue we aren't waking up if there are in fact threads blocked on that queue. Secondly, there might not be any threads blocked on the queue we have chosen to waken threads from (there might only be threads blocked on the other queue and the threads for this queue are all spinning) in which case we disown the turnstile instead of doing a braodcast and unpend.
2006-04-18 18:27:54 +00:00
volatile struct thread *owner;
- Add sysctls at debug.rwlock to control the behavior of the speculative spinning when readers hold a lock. This spinning is speculative because, unlike the write case, we can not test whether the owners are running. - Add speculative read spinning for readers who are blocked by pending writers while a read lock is still held. This allows the thread to spin until the write lock succeeds after which it may spin until the writer has released the lock. This prevents excessive context switches when readers and writers both hold the lock for brief periods. Sponsored by: Nokia
2008-04-04 10:00:46 +00:00
int spintries = 0;
int i;
'owner' is not used without SMP. Fix kernel build for such kernel configurations. Approved by: jhb
2006-04-18 20:32:42 +00:00
#endif
Fix some nits in lock profiling for rwlocks: - Properly note when a read lock is released. - Always note when we contest on a read lock. - Only note success of obtaining read locks for the first reader to match the behavior of sx(9). Reviewed by: kmacy
2007-03-07 20:48:48 +00:00
uint64_t waittime = 0;
Further improvements to LOCK_PROFILING: - Fix missing initialization in kern_rwlock.c causing bogus times to be collected - Move updates to the lock hash to after the lock is released for spin mutexes, sleep mutexes, and sx locks - Add new kernel build option LOCK_PROFILE_FAST - only update lock profiling statistics when an acquisition is contended. This reduces the overhead of LOCK_PROFILING to increasing system time by 20%-25% which on "make -j8 kernel-toolchain" on a dual woodcrest is unmeasurable in terms of wall-clock time. Contrast this to enabling lock profiling without LOCK_PROFILE_FAST and I see a 5x-6x slowdown in wall-clock time.
2007-02-27 06:42:05 +00:00
int contested = 0;
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
uintptr_t v;
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
Add destroyed cookie values for sx locks and rwlocks as well as extra KASSERTs so that any lock operations on a destroyed lock will panic or hang.
2007-05-08 21:51:37 +00:00
KASSERT(rw->rw_lock != RW_DESTROYED,
("rw_rlock() of destroyed rwlock @ %s:%d", file, line));
- Add a rw_wowner() macro that just returns the owner of a write lock and use it in places that only care about the write owner instead of rw_owner() as a baby step towards limited read-lock owner. - Tidy the code that sets the WAITER flag bits to not duplicate a test around the atomic operation and the KTR trace in both of the lock functions.
2006-04-17 21:11:01 +00:00
KASSERT(rw_wowner(rw) != curthread,
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
("%s (%s): wlock already held @ %s:%d", __func__,
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
rw->lock_object.lo_name, file, line));
WITNESS_CHECKORDER(&rw->lock_object, LOP_NEWORDER, file, line);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
for (;;) {
/*
* Handle the easy case. If no other thread has a write
* lock, then try to bump up the count of read locks. Note
* that we have to preserve the current state of the
* RW_LOCK_WRITE_WAITERS flag. If we fail to acquire a
* read lock, then rw_lock must have changed, so restart
* the loop. Note that this handles the case of a
* completely unlocked rwlock since such a lock is encoded
* as a read lock with no waiters.
*/
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
v = rw->rw_lock;
if (RW_CAN_READ(v)) {
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
/*
* The RW_LOCK_READ_WAITERS flag should only be set
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
* if the lock has been unlocked and write waiters
* were present.
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
*/
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
if (atomic_cmpset_acq_ptr(&rw->rw_lock, v,
v + RW_ONE_READER)) {
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
CTR4(KTR_LOCK,
"%s: %p succeed %p -> %p", __func__,
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
rw, (void *)v,
(void *)(v + RW_ONE_READER));
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
break;
}
Adaptively spin before blocking on the turnstile if an rwlock is write locked. In general the adaptive spinning is similar to the same code for mutexes with some extra trickiness in rw_wunlock_hard(). Specifically, even though both wait bits might be set and we might have a turnstile with at least one waiting thread, there might not be any threads blocked on the queue we are not waking up (they might all be spinning), and we should only preserve the waiting flag for the queue we aren't waking up if there are in fact threads blocked on that queue. Secondly, there might not be any threads blocked on the queue we have chosen to waken threads from (there might only be threads blocked on the other queue and the threads for this queue are all spinning) in which case we disown the turnstile instead of doing a braodcast and unpend.
2006-04-18 18:27:54 +00:00
cpu_spinwait();
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
continue;
}
- Re-implement lock profiling in such a way that it no longer breaks the ABI when enabled. There is no longer an embedded lock_profile_object in each lock. Instead a list of lock_profile_objects is kept per-thread for each lock it may own. The cnt_hold statistic is now always 0 to facilitate this. - Support shared locking by tracking individual lock instances and statistics in the per-thread per-instance lock_profile_object. - Make the lock profiling hash table a per-cpu singly linked list with a per-cpu static lock_prof allocator. This removes the need for an array of spinlocks and reduces cache contention between cores. - Use a seperate hash for spinlocks and other locks so that only a critical_enter() is required and not a spinlock_enter() to modify the per-cpu tables. - Count time spent spinning in the lock statistics. - Remove the LOCK_PROFILE_SHARED option as it is always supported now. - Specifically drop and release the scheduler locks in both schedulers since we track owners now. In collaboration with: Kip Macy Sponsored by: Nokia
2007-12-15 23:13:31 +00:00
lock_profile_obtain_lock_failed(&rw->lock_object,
&contested, &waittime);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
Simplify the adaptive spinning algorithm in rwlock and mutex: currently, before to spin the turnstile spinlock is acquired and the waiters flag is set. This is not strictly necessary, so just spin before to acquire the spinlock and to set the flags. This will simplify a lot other functions too, as now we have the waiters flag set only if there are actually waiters. This should make wakeup/sleeping couplet faster under intensive mutex workload. This also fixes a bug in rw_try_upgrade() in the adaptive case, where turnstile_lookup() will recurse on the ts_lock lock that will never be really released [1]. [1] Reported by: jeff with Nokia help Tested by: pho, kris (earlier, bugged version of rwlock part) Discussed with: jhb [2], jeff MFC after: 1 week [2] John had a similar patch about 6.x and/or 7.x about mutexes probabilly
2007-11-26 22:37:35 +00:00
#ifdef ADAPTIVE_RWLOCKS
/*
* If the owner is running on another CPU, spin until
* the owner stops running or the state of the lock
* changes.
*/
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
if ((v & RW_LOCK_READ) == 0) {
owner = (struct thread *)RW_OWNER(v);
if (TD_IS_RUNNING(owner)) {
if (LOCK_LOG_TEST(&rw->lock_object, 0))
CTR3(KTR_LOCK,
"%s: spinning on %p held by %p",
__func__, rw, owner);
while ((struct thread*)RW_OWNER(rw->rw_lock) ==
owner && TD_IS_RUNNING(owner))
cpu_spinwait();
continue;
}
- Add sysctls at debug.rwlock to control the behavior of the speculative spinning when readers hold a lock. This spinning is speculative because, unlike the write case, we can not test whether the owners are running. - Add speculative read spinning for readers who are blocked by pending writers while a read lock is still held. This allows the thread to spin until the write lock succeeds after which it may spin until the writer has released the lock. This prevents excessive context switches when readers and writers both hold the lock for brief periods. Sponsored by: Nokia
2008-04-04 10:00:46 +00:00
} else if (spintries < rowner_retries) {
spintries++;
for (i = 0; i < rowner_loops; i++) {
v = rw->rw_lock;
if ((v & RW_LOCK_READ) == 0 || RW_CAN_READ(v))
break;
cpu_spinwait();
}
if (i != rowner_loops)
continue;
Simplify the adaptive spinning algorithm in rwlock and mutex: currently, before to spin the turnstile spinlock is acquired and the waiters flag is set. This is not strictly necessary, so just spin before to acquire the spinlock and to set the flags. This will simplify a lot other functions too, as now we have the waiters flag set only if there are actually waiters. This should make wakeup/sleeping couplet faster under intensive mutex workload. This also fixes a bug in rw_try_upgrade() in the adaptive case, where turnstile_lookup() will recurse on the ts_lock lock that will never be really released [1]. [1] Reported by: jeff with Nokia help Tested by: pho, kris (earlier, bugged version of rwlock part) Discussed with: jhb [2], jeff MFC after: 1 week [2] John had a similar patch about 6.x and/or 7.x about mutexes probabilly
2007-11-26 22:37:35 +00:00
}
#endif
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
/*
* Okay, now it's the hard case. Some other thread already
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
* has a write lock or there are write waiters present,
* acquire the turnstile lock so we can begin the process
* of blocking.
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
*/
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
ts = turnstile_trywait(&rw->lock_object);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
/*
* The lock might have been released while we spun, so
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
* recheck its state and restart the loop if needed.
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
*/
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
v = rw->rw_lock;
if (RW_CAN_READ(v)) {
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_cancel(ts);
Adaptively spin before blocking on the turnstile if an rwlock is write locked. In general the adaptive spinning is similar to the same code for mutexes with some extra trickiness in rw_wunlock_hard(). Specifically, even though both wait bits might be set and we might have a turnstile with at least one waiting thread, there might not be any threads blocked on the queue we are not waking up (they might all be spinning), and we should only preserve the waiting flag for the queue we aren't waking up if there are in fact threads blocked on that queue. Secondly, there might not be any threads blocked on the queue we have chosen to waken threads from (there might only be threads blocked on the other queue and the threads for this queue are all spinning) in which case we disown the turnstile instead of doing a braodcast and unpend.
2006-04-18 18:27:54 +00:00
cpu_spinwait();
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
continue;
}
Simplify the adaptive spinning algorithm in rwlock and mutex: currently, before to spin the turnstile spinlock is acquired and the waiters flag is set. This is not strictly necessary, so just spin before to acquire the spinlock and to set the flags. This will simplify a lot other functions too, as now we have the waiters flag set only if there are actually waiters. This should make wakeup/sleeping couplet faster under intensive mutex workload. This also fixes a bug in rw_try_upgrade() in the adaptive case, where turnstile_lookup() will recurse on the ts_lock lock that will never be really released [1]. [1] Reported by: jeff with Nokia help Tested by: pho, kris (earlier, bugged version of rwlock part) Discussed with: jhb [2], jeff MFC after: 1 week [2] John had a similar patch about 6.x and/or 7.x about mutexes probabilly
2007-11-26 22:37:35 +00:00
#ifdef ADAPTIVE_RWLOCKS
/*
* If the current owner of the lock is executing on another
* CPU quit the hard path and try to spin.
*/
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
if ((v & RW_LOCK_READ) == 0) {
owner = (struct thread *)RW_OWNER(v);
if (TD_IS_RUNNING(owner)) {
turnstile_cancel(ts);
cpu_spinwait();
continue;
}
Simplify the adaptive spinning algorithm in rwlock and mutex: currently, before to spin the turnstile spinlock is acquired and the waiters flag is set. This is not strictly necessary, so just spin before to acquire the spinlock and to set the flags. This will simplify a lot other functions too, as now we have the waiters flag set only if there are actually waiters. This should make wakeup/sleeping couplet faster under intensive mutex workload. This also fixes a bug in rw_try_upgrade() in the adaptive case, where turnstile_lookup() will recurse on the ts_lock lock that will never be really released [1]. [1] Reported by: jeff with Nokia help Tested by: pho, kris (earlier, bugged version of rwlock part) Discussed with: jhb [2], jeff MFC after: 1 week [2] John had a similar patch about 6.x and/or 7.x about mutexes probabilly
2007-11-26 22:37:35 +00:00
}
#endif
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
/*
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
* The lock is held in write mode or it already has waiters.
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
*/
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
MPASS(!RW_CAN_READ(v));
/*
* If the RW_LOCK_READ_WAITERS flag is already set, then
* we can go ahead and block. If it is not set then try
* to set it. If we fail to set it drop the turnstile
* lock and restart the loop.
*/
if (!(v & RW_LOCK_READ_WAITERS)) {
if (!atomic_cmpset_ptr(&rw->rw_lock, v,
v | RW_LOCK_READ_WAITERS)) {
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_cancel(ts);
- Add a rw_wowner() macro that just returns the owner of a write lock and use it in places that only care about the write owner instead of rw_owner() as a baby step towards limited read-lock owner. - Tidy the code that sets the WAITER flag bits to not duplicate a test around the atomic operation and the KTR trace in both of the lock functions.
2006-04-17 21:11:01 +00:00
cpu_spinwait();
continue;
}
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
- Add a rw_wowner() macro that just returns the owner of a write lock and use it in places that only care about the write owner instead of rw_owner() as a baby step towards limited read-lock owner. - Tidy the code that sets the WAITER flag bits to not duplicate a test around the atomic operation and the KTR trace in both of the lock functions.
2006-04-17 21:11:01 +00:00
CTR2(KTR_LOCK, "%s: %p set read waiters flag",
__func__, rw);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
}
/*
* We were unable to acquire the lock and the read waiters
* flag is set, so we must block on the turnstile.
*/
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
CTR2(KTR_LOCK, "%s: %p blocking on turnstile", __func__,
rw);
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_wait(ts, rw_owner(rw), TS_SHARED_QUEUE);
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
CTR2(KTR_LOCK, "%s: %p resuming from turnstile",
__func__, rw);
}
/*
* TODO: acquire "owner of record" here. Here be turnstile dragons
* however. turnstiles don't like owners changing between calls to
* turnstile_wait() currently.
*/
- Re-implement lock profiling in such a way that it no longer breaks the ABI when enabled. There is no longer an embedded lock_profile_object in each lock. Instead a list of lock_profile_objects is kept per-thread for each lock it may own. The cnt_hold statistic is now always 0 to facilitate this. - Support shared locking by tracking individual lock instances and statistics in the per-thread per-instance lock_profile_object. - Make the lock profiling hash table a per-cpu singly linked list with a per-cpu static lock_prof allocator. This removes the need for an array of spinlocks and reduces cache contention between cores. - Use a seperate hash for spinlocks and other locks so that only a critical_enter() is required and not a spinlock_enter() to modify the per-cpu tables. - Count time spent spinning in the lock statistics. - Remove the LOCK_PROFILE_SHARED option as it is always supported now. - Specifically drop and release the scheduler locks in both schedulers since we track owners now. In collaboration with: Kip Macy Sponsored by: Nokia
2007-12-15 23:13:31 +00:00
lock_profile_obtain_lock_success( &rw->lock_object, contested,
waittime, file, line);
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
LOCK_LOG_LOCK("RLOCK", &rw->lock_object, 0, 0, file, line);
WITNESS_LOCK(&rw->lock_object, 0, file, line);
Adjust td_locks for non-spin mutexes, rwlocks, and sx locks so that it is a count of all non-spin locks, not just lockmgr locks. This can give us a much cheaper way to see if we have any locks held (such as when returning to userland via userret()) without requiring WITNESS. MFC after: 1 week
2006-07-27 21:45:55 +00:00
curthread->td_locks++;
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
curthread->td_rw_rlocks++;
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
}
Add rw_try_rlock() and rw_try_wlock() to rwlocks. These functions try the specified operation (rlocking and wlocking) and true is returned if the operation completes, false otherwise. The KPI is enriched by this commit, so __FreeBSD_version bumping and manpage updating will happen soon. Requested by: jeff, kris
2008-04-01 20:31:55 +00:00
int
_rw_try_rlock(struct rwlock *rw, const char *file, int line)
{
uintptr_t x;
for (;;) {
x = rw->rw_lock;
KASSERT(rw->rw_lock != RW_DESTROYED,
("rw_try_rlock() of destroyed rwlock @ %s:%d", file, line));
if (!(x & RW_LOCK_READ))
break;
if (atomic_cmpset_acq_ptr(&rw->rw_lock, x, x + RW_ONE_READER)) {
LOCK_LOG_TRY("RLOCK", &rw->lock_object, 0, 1, file,
line);
WITNESS_LOCK(&rw->lock_object, LOP_TRYLOCK, file, line);
curthread->td_locks++;
curthread->td_rw_rlocks++;
return (1);
}
}
LOCK_LOG_TRY("RLOCK", &rw->lock_object, 0, 0, file, line);
return (0);
}
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
void
_rw_runlock(struct rwlock *rw, const char *file, int line)
{
struct turnstile *ts;
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
uintptr_t x, v, queue;
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
Add destroyed cookie values for sx locks and rwlocks as well as extra KASSERTs so that any lock operations on a destroyed lock will panic or hang.
2007-05-08 21:51:37 +00:00
KASSERT(rw->rw_lock != RW_DESTROYED,
("rw_runlock() of destroyed rwlock @ %s:%d", file, line));
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
_rw_assert(rw, RA_RLOCKED, file, line);
Adjust td_locks for non-spin mutexes, rwlocks, and sx locks so that it is a count of all non-spin locks, not just lockmgr locks. This can give us a much cheaper way to see if we have any locks held (such as when returning to userland via userret()) without requiring WITNESS. MFC after: 1 week
2006-07-27 21:45:55 +00:00
curthread->td_locks--;
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
curthread->td_rw_rlocks--;
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
WITNESS_UNLOCK(&rw->lock_object, 0, file, line);
LOCK_LOG_LOCK("RUNLOCK", &rw->lock_object, 0, 0, file, line);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
/* TODO: drop "owner of record" here. */
for (;;) {
/*
* See if there is more than one read lock held. If so,
* just drop one and return.
*/
x = rw->rw_lock;
if (RW_READERS(x) > 1) {
if (atomic_cmpset_ptr(&rw->rw_lock, x,
x - RW_ONE_READER)) {
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
CTR4(KTR_LOCK,
"%s: %p succeeded %p -> %p",
__func__, rw, (void *)x,
(void *)(x - RW_ONE_READER));
break;
}
continue;
Fix some nits in lock profiling for rwlocks: - Properly note when a read lock is released. - Always note when we contest on a read lock. - Only note success of obtaining read locks for the first reader to match the behavior of sx(9). Reviewed by: kmacy
2007-03-07 20:48:48 +00:00
}
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
/*
* If there aren't any waiters for a write lock, then try
* to drop it quickly.
*/
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
if (!(x & RW_LOCK_WAITERS)) {
MPASS((x & ~RW_LOCK_WRITE_SPINNER) ==
RW_READERS_LOCK(1));
if (atomic_cmpset_ptr(&rw->rw_lock, x, RW_UNLOCKED)) {
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
CTR2(KTR_LOCK, "%s: %p last succeeded",
__func__, rw);
break;
}
continue;
}
/*
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
* Ok, we know we have waiters and we think we are the
* last reader, so grab the turnstile lock.
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
*/
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_chain_lock(&rw->lock_object);
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
v = rw->rw_lock & (RW_LOCK_WAITERS | RW_LOCK_WRITE_SPINNER);
MPASS(v & RW_LOCK_WAITERS);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
/*
* Try to drop our lock leaving the lock in a unlocked
* state.
*
* If you wanted to do explicit lock handoff you'd have to
* do it here. You'd also want to use turnstile_signal()
* and you'd have to handle the race where a higher
* priority thread blocks on the write lock before the
* thread you wakeup actually runs and have the new thread
* "steal" the lock. For now it's a lot simpler to just
* wakeup all of the waiters.
*
* As above, if we fail, then another thread might have
* acquired a read lock, so drop the turnstile lock and
* restart.
*/
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
x = RW_UNLOCKED;
if (v & RW_LOCK_WRITE_WAITERS) {
queue = TS_EXCLUSIVE_QUEUE;
x |= (v & RW_LOCK_READ_WAITERS);
} else
queue = TS_SHARED_QUEUE;
if (!atomic_cmpset_ptr(&rw->rw_lock, RW_READERS_LOCK(1) | v,
x)) {
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_chain_unlock(&rw->lock_object);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
continue;
}
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
CTR2(KTR_LOCK, "%s: %p last succeeded with waiters",
__func__, rw);
/*
* Ok. The lock is released and all that's left is to
* wake up the waiters. Note that the lock might not be
* free anymore, but in that case the writers will just
* block again if they run before the new lock holder(s)
* release the lock.
*/
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
ts = turnstile_lookup(&rw->lock_object);
Adaptively spin before blocking on the turnstile if an rwlock is write locked. In general the adaptive spinning is similar to the same code for mutexes with some extra trickiness in rw_wunlock_hard(). Specifically, even though both wait bits might be set and we might have a turnstile with at least one waiting thread, there might not be any threads blocked on the queue we are not waking up (they might all be spinning), and we should only preserve the waiting flag for the queue we aren't waking up if there are in fact threads blocked on that queue. Secondly, there might not be any threads blocked on the queue we have chosen to waken threads from (there might only be threads blocked on the other queue and the threads for this queue are all spinning) in which case we disown the turnstile instead of doing a braodcast and unpend.
2006-04-18 18:27:54 +00:00
MPASS(ts != NULL);
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
turnstile_broadcast(ts, queue);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
turnstile_unpend(ts, TS_SHARED_LOCK);
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_chain_unlock(&rw->lock_object);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
break;
}
- Re-implement lock profiling in such a way that it no longer breaks the ABI when enabled. There is no longer an embedded lock_profile_object in each lock. Instead a list of lock_profile_objects is kept per-thread for each lock it may own. The cnt_hold statistic is now always 0 to facilitate this. - Support shared locking by tracking individual lock instances and statistics in the per-thread per-instance lock_profile_object. - Make the lock profiling hash table a per-cpu singly linked list with a per-cpu static lock_prof allocator. This removes the need for an array of spinlocks and reduces cache contention between cores. - Use a seperate hash for spinlocks and other locks so that only a critical_enter() is required and not a spinlock_enter() to modify the per-cpu tables. - Count time spent spinning in the lock statistics. - Remove the LOCK_PROFILE_SHARED option as it is always supported now. - Specifically drop and release the scheduler locks in both schedulers since we track owners now. In collaboration with: Kip Macy Sponsored by: Nokia
2007-12-15 23:13:31 +00:00
lock_profile_release_lock(&rw->lock_object);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
}
/*
* This function is called when we are unable to obtain a write lock on the
* first try. This means that at least one other thread holds either a
* read or write lock.
*/
void
_rw_wlock_hard(struct rwlock *rw, uintptr_t tid, const char *file, int line)
{
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
struct turnstile *ts;
- Simplify the #ifdef's for adaptive mutexes and rwlocks by conditionally defining a macro earlier in the file. - Add NO_ADAPTIVE_RWLOCKS option to disable adaptive spinning for rwlocks.
2007-03-22 16:09:23 +00:00
#ifdef ADAPTIVE_RWLOCKS
Adaptively spin before blocking on the turnstile if an rwlock is write locked. In general the adaptive spinning is similar to the same code for mutexes with some extra trickiness in rw_wunlock_hard(). Specifically, even though both wait bits might be set and we might have a turnstile with at least one waiting thread, there might not be any threads blocked on the queue we are not waking up (they might all be spinning), and we should only preserve the waiting flag for the queue we aren't waking up if there are in fact threads blocked on that queue. Secondly, there might not be any threads blocked on the queue we have chosen to waken threads from (there might only be threads blocked on the other queue and the threads for this queue are all spinning) in which case we disown the turnstile instead of doing a braodcast and unpend.
2006-04-18 18:27:54 +00:00
volatile struct thread *owner;
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
int spintries = 0;
int i;
'owner' is not used without SMP. Fix kernel build for such kernel configurations. Approved by: jhb
2006-04-18 20:32:42 +00:00
#endif
Fix some problems with lock profiling in rw locks: - Adjust lock_profiling stubs semantic in the hard functions in order to be more accurate and trustable - As for sx locks, disable shared paths for lock_profiling. Actually, lock_profiling has a subtle race which makes results caming from shared paths not completely trustable. A macro stub (LOCK_PROFILING_SHARED) can be actually used for re-enabling this paths, but is currently intended for developing use only. - style(9) fixes Approved by: jeff, kmacy, jhb[1] Approved by: re [1] Had initial reservations not shared by others, conceded in the end.
2007-07-20 08:43:42 +00:00
uint64_t waittime = 0;
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
uintptr_t v, x;
Fix some problems with lock profiling in rw locks: - Adjust lock_profiling stubs semantic in the hard functions in order to be more accurate and trustable - As for sx locks, disable shared paths for lock_profiling. Actually, lock_profiling has a subtle race which makes results caming from shared paths not completely trustable. A macro stub (LOCK_PROFILING_SHARED) can be actually used for re-enabling this paths, but is currently intended for developing use only. - style(9) fixes Approved by: jeff, kmacy, jhb[1] Approved by: re [1] Had initial reservations not shared by others, conceded in the end.
2007-07-20 08:43:42 +00:00
int contested = 0;
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
if (rw_wlocked(rw)) {
KASSERT(rw->lock_object.lo_flags & RW_RECURSE,
("%s: recursing but non-recursive rw %s @ %s:%d\n",
__func__, rw->lock_object.lo_name, file, line));
rw->rw_recurse++;
if (LOCK_LOG_TEST(&rw->lock_object, 0))
CTR2(KTR_LOCK, "%s: %p recursing", __func__, rw);
return;
}
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
CTR5(KTR_LOCK, "%s: %s contested (lock=%p) at %s:%d", __func__,
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
rw->lock_object.lo_name, (void *)rw->rw_lock, file, line);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
while (!_rw_write_lock(rw, tid)) {
- Re-implement lock profiling in such a way that it no longer breaks the ABI when enabled. There is no longer an embedded lock_profile_object in each lock. Instead a list of lock_profile_objects is kept per-thread for each lock it may own. The cnt_hold statistic is now always 0 to facilitate this. - Support shared locking by tracking individual lock instances and statistics in the per-thread per-instance lock_profile_object. - Make the lock profiling hash table a per-cpu singly linked list with a per-cpu static lock_prof allocator. This removes the need for an array of spinlocks and reduces cache contention between cores. - Use a seperate hash for spinlocks and other locks so that only a critical_enter() is required and not a spinlock_enter() to modify the per-cpu tables. - Count time spent spinning in the lock statistics. - Remove the LOCK_PROFILE_SHARED option as it is always supported now. - Specifically drop and release the scheduler locks in both schedulers since we track owners now. In collaboration with: Kip Macy Sponsored by: Nokia
2007-12-15 23:13:31 +00:00
lock_profile_obtain_lock_failed(&rw->lock_object,
&contested, &waittime);
Simplify the adaptive spinning algorithm in rwlock and mutex: currently, before to spin the turnstile spinlock is acquired and the waiters flag is set. This is not strictly necessary, so just spin before to acquire the spinlock and to set the flags. This will simplify a lot other functions too, as now we have the waiters flag set only if there are actually waiters. This should make wakeup/sleeping couplet faster under intensive mutex workload. This also fixes a bug in rw_try_upgrade() in the adaptive case, where turnstile_lookup() will recurse on the ts_lock lock that will never be really released [1]. [1] Reported by: jeff with Nokia help Tested by: pho, kris (earlier, bugged version of rwlock part) Discussed with: jhb [2], jeff MFC after: 1 week [2] John had a similar patch about 6.x and/or 7.x about mutexes probabilly
2007-11-26 22:37:35 +00:00
#ifdef ADAPTIVE_RWLOCKS
/*
* If the lock is write locked and the owner is
* running on another CPU, spin until the owner stops
* running or the state of the lock changes.
*/
v = rw->rw_lock;
owner = (struct thread *)RW_OWNER(v);
if (!(v & RW_LOCK_READ) && TD_IS_RUNNING(owner)) {
if (LOCK_LOG_TEST(&rw->lock_object, 0))
CTR3(KTR_LOCK, "%s: spinning on %p held by %p",
__func__, rw, owner);
while ((struct thread*)RW_OWNER(rw->rw_lock) == owner &&
TD_IS_RUNNING(owner))
cpu_spinwait();
continue;
}
- Add sysctls at debug.rwlock to control the behavior of the speculative spinning when readers hold a lock. This spinning is speculative because, unlike the write case, we can not test whether the owners are running. - Add speculative read spinning for readers who are blocked by pending writers while a read lock is still held. This allows the thread to spin until the write lock succeeds after which it may spin until the writer has released the lock. This prevents excessive context switches when readers and writers both hold the lock for brief periods. Sponsored by: Nokia
2008-04-04 10:00:46 +00:00
if ((v & RW_LOCK_READ) && RW_READERS(v) &&
spintries < rowner_retries) {
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
if (!(v & RW_LOCK_WRITE_SPINNER)) {
if (!atomic_cmpset_ptr(&rw->rw_lock, v,
v | RW_LOCK_WRITE_SPINNER)) {
cpu_spinwait();
continue;
}
}
spintries++;
- Add sysctls at debug.rwlock to control the behavior of the speculative spinning when readers hold a lock. This spinning is speculative because, unlike the write case, we can not test whether the owners are running. - Add speculative read spinning for readers who are blocked by pending writers while a read lock is still held. This allows the thread to spin until the write lock succeeds after which it may spin until the writer has released the lock. This prevents excessive context switches when readers and writers both hold the lock for brief periods. Sponsored by: Nokia
2008-04-04 10:00:46 +00:00
for (i = 0; i < rowner_loops; i++) {
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
if ((rw->rw_lock & RW_LOCK_WRITE_SPINNER) == 0)
break;
cpu_spinwait();
}
- Add sysctls at debug.rwlock to control the behavior of the speculative spinning when readers hold a lock. This spinning is speculative because, unlike the write case, we can not test whether the owners are running. - Add speculative read spinning for readers who are blocked by pending writers while a read lock is still held. This allows the thread to spin until the write lock succeeds after which it may spin until the writer has released the lock. This prevents excessive context switches when readers and writers both hold the lock for brief periods. Sponsored by: Nokia
2008-04-04 10:00:46 +00:00
if (i != rowner_loops)
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
continue;
}
Simplify the adaptive spinning algorithm in rwlock and mutex: currently, before to spin the turnstile spinlock is acquired and the waiters flag is set. This is not strictly necessary, so just spin before to acquire the spinlock and to set the flags. This will simplify a lot other functions too, as now we have the waiters flag set only if there are actually waiters. This should make wakeup/sleeping couplet faster under intensive mutex workload. This also fixes a bug in rw_try_upgrade() in the adaptive case, where turnstile_lookup() will recurse on the ts_lock lock that will never be really released [1]. [1] Reported by: jeff with Nokia help Tested by: pho, kris (earlier, bugged version of rwlock part) Discussed with: jhb [2], jeff MFC after: 1 week [2] John had a similar patch about 6.x and/or 7.x about mutexes probabilly
2007-11-26 22:37:35 +00:00
#endif
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
ts = turnstile_trywait(&rw->lock_object);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
v = rw->rw_lock;
Simplify the adaptive spinning algorithm in rwlock and mutex: currently, before to spin the turnstile spinlock is acquired and the waiters flag is set. This is not strictly necessary, so just spin before to acquire the spinlock and to set the flags. This will simplify a lot other functions too, as now we have the waiters flag set only if there are actually waiters. This should make wakeup/sleeping couplet faster under intensive mutex workload. This also fixes a bug in rw_try_upgrade() in the adaptive case, where turnstile_lookup() will recurse on the ts_lock lock that will never be really released [1]. [1] Reported by: jeff with Nokia help Tested by: pho, kris (earlier, bugged version of rwlock part) Discussed with: jhb [2], jeff MFC after: 1 week [2] John had a similar patch about 6.x and/or 7.x about mutexes probabilly
2007-11-26 22:37:35 +00:00
#ifdef ADAPTIVE_RWLOCKS
/*
* If the current owner of the lock is executing on another
* CPU quit the hard path and try to spin.
*/
if (!(v & RW_LOCK_READ)) {
owner = (struct thread *)RW_OWNER(v);
if (TD_IS_RUNNING(owner)) {
turnstile_cancel(ts);
cpu_spinwait();
continue;
}
}
#endif
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
/*
Improve a comment which, in the actual CVS stock, doesn't completely explain the logic of the code chunk.
2008-05-27 00:27:50 +00:00
* Check for the waiters flags about this rwlock.
* If the lock was released, without maintain any pending
* waiters queue, simply try to acquire it.
* If a pending waiters queue is present, claim the lock
* ownership and maintain the pending queue.
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
*/
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
x = v & (RW_LOCK_WAITERS | RW_LOCK_WRITE_SPINNER);
if ((v & ~x) == RW_UNLOCKED) {
x &= ~RW_LOCK_WRITE_SPINNER;
if (atomic_cmpset_acq_ptr(&rw->rw_lock, v, tid | x)) {
if (x)
turnstile_claim(ts);
else
turnstile_cancel(ts);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
break;
}
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_cancel(ts);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
cpu_spinwait();
continue;
}
/*
* If the RW_LOCK_WRITE_WAITERS flag isn't set, then try to
* set it. If we fail to set it, then loop back and try
* again.
*/
- Add a rw_wowner() macro that just returns the owner of a write lock and use it in places that only care about the write owner instead of rw_owner() as a baby step towards limited read-lock owner. - Tidy the code that sets the WAITER flag bits to not duplicate a test around the atomic operation and the KTR trace in both of the lock functions.
2006-04-17 21:11:01 +00:00
if (!(v & RW_LOCK_WRITE_WAITERS)) {
if (!atomic_cmpset_ptr(&rw->rw_lock, v,
v | RW_LOCK_WRITE_WAITERS)) {
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_cancel(ts);
- Add a rw_wowner() macro that just returns the owner of a write lock and use it in places that only care about the write owner instead of rw_owner() as a baby step towards limited read-lock owner. - Tidy the code that sets the WAITER flag bits to not duplicate a test around the atomic operation and the KTR trace in both of the lock functions.
2006-04-17 21:11:01 +00:00
cpu_spinwait();
continue;
}
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
- Add a rw_wowner() macro that just returns the owner of a write lock and use it in places that only care about the write owner instead of rw_owner() as a baby step towards limited read-lock owner. - Tidy the code that sets the WAITER flag bits to not duplicate a test around the atomic operation and the KTR trace in both of the lock functions.
2006-04-17 21:11:01 +00:00
CTR2(KTR_LOCK, "%s: %p set write waiters flag",
__func__, rw);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
}
/*
* We were unable to acquire the lock and the write waiters
* flag is set, so we must block on the turnstile.
*/
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
CTR2(KTR_LOCK, "%s: %p blocking on turnstile", __func__,
rw);
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_wait(ts, rw_owner(rw), TS_EXCLUSIVE_QUEUE);
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
CTR2(KTR_LOCK, "%s: %p resuming from turnstile",
__func__, rw);
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
#ifdef ADAPTIVE_RWLOCKS
spintries = 0;
#endif
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
}
Fix some problems with lock profiling in rw locks: - Adjust lock_profiling stubs semantic in the hard functions in order to be more accurate and trustable - As for sx locks, disable shared paths for lock_profiling. Actually, lock_profiling has a subtle race which makes results caming from shared paths not completely trustable. A macro stub (LOCK_PROFILING_SHARED) can be actually used for re-enabling this paths, but is currently intended for developing use only. - style(9) fixes Approved by: jeff, kmacy, jhb[1] Approved by: re [1] Had initial reservations not shared by others, conceded in the end.
2007-07-20 08:43:42 +00:00
lock_profile_obtain_lock_success(&rw->lock_object, contested, waittime,
file, line);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
}
/*
* This function is called if the first try at releasing a write lock failed.
* This means that one of the 2 waiter bits must be set indicating that at
* least one thread is waiting on this lock.
*/
void
_rw_wunlock_hard(struct rwlock *rw, uintptr_t tid, const char *file, int line)
{
struct turnstile *ts;
uintptr_t v;
int queue;
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
if (rw_wlocked(rw) && rw_recursed(rw)) {
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
rw->rw_recurse--;
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
CTR2(KTR_LOCK, "%s: %p unrecursing", __func__, rw);
return;
}
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
v = rw->rw_lock;
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
KASSERT(rw->rw_lock & (RW_LOCK_READ_WAITERS | RW_LOCK_WRITE_WAITERS),
("%s: neither of the waiter flags are set", __func__));
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
CTR2(KTR_LOCK, "%s: %p contested", __func__, rw);
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_chain_lock(&rw->lock_object);
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
ts = turnstile_lookup(&rw->lock_object);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
MPASS(ts != NULL);
/*
* Use the same algo as sx locks for now. Prefer waking up shared
* waiters if we have any over writers. This is probably not ideal.
*
* 'v' is the value we are going to write back to rw_lock. If we
* have waiters on both queues, we need to preserve the state of
* the waiter flag for the queue we don't wake up. For now this is
* hardcoded for the algorithm mentioned above.
*
* In the case of both readers and writers waiting we wakeup the
* readers but leave the RW_LOCK_WRITE_WAITERS flag set. If a
* new writer comes in before a reader it will claim the lock up
* above. There is probably a potential priority inversion in
* there that could be worked around either by waking both queues
* of waiters or doing some complicated lock handoff gymnastics.
*/
Adaptively spin before blocking on the turnstile if an rwlock is write locked. In general the adaptive spinning is similar to the same code for mutexes with some extra trickiness in rw_wunlock_hard(). Specifically, even though both wait bits might be set and we might have a turnstile with at least one waiting thread, there might not be any threads blocked on the queue we are not waking up (they might all be spinning), and we should only preserve the waiting flag for the queue we aren't waking up if there are in fact threads blocked on that queue. Secondly, there might not be any threads blocked on the queue we have chosen to waken threads from (there might only be threads blocked on the other queue and the threads for this queue are all spinning) in which case we disown the turnstile instead of doing a braodcast and unpend.
2006-04-18 18:27:54 +00:00
v = RW_UNLOCKED;
- In rw_wunlock_hard prefer to wakeup writers if there are both readers and writers available. Doing otherwise can cause deadlocks as no read locks can proceed while there are write waiters. Sponsored by: Nokia
2008-02-07 06:16:54 +00:00
if (rw->rw_lock & RW_LOCK_WRITE_WAITERS) {
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
queue = TS_EXCLUSIVE_QUEUE;
- In rw_wunlock_hard prefer to wakeup writers if there are both readers and writers available. Doing otherwise can cause deadlocks as no read locks can proceed while there are write waiters. Sponsored by: Nokia
2008-02-07 06:16:54 +00:00
v |= (rw->rw_lock & RW_LOCK_READ_WAITERS);
} else
queue = TS_SHARED_QUEUE;
Adaptively spin before blocking on the turnstile if an rwlock is write locked. In general the adaptive spinning is similar to the same code for mutexes with some extra trickiness in rw_wunlock_hard(). Specifically, even though both wait bits might be set and we might have a turnstile with at least one waiting thread, there might not be any threads blocked on the queue we are not waking up (they might all be spinning), and we should only preserve the waiting flag for the queue we aren't waking up if there are in fact threads blocked on that queue. Secondly, there might not be any threads blocked on the queue we have chosen to waken threads from (there might only be threads blocked on the other queue and the threads for this queue are all spinning) in which case we disown the turnstile instead of doing a braodcast and unpend.
2006-04-18 18:27:54 +00:00
/* Wake up all waiters for the specific queue. */
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
if (LOCK_LOG_TEST(&rw->lock_object, 0))
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
CTR3(KTR_LOCK, "%s: %p waking up %s waiters", __func__, rw,
queue == TS_SHARED_QUEUE ? "read" : "write");
turnstile_broadcast(ts, queue);
atomic_store_rel_ptr(&rw->rw_lock, v);
turnstile_unpend(ts, TS_EXCLUSIVE_LOCK);
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_chain_unlock(&rw->lock_object);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
}
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
/*
* Attempt to do a non-blocking upgrade from a read lock to a write
* lock. This will only succeed if this thread holds a single read
* lock. Returns true if the upgrade succeeded and false otherwise.
*/
int
_rw_try_upgrade(struct rwlock *rw, const char *file, int line)
{
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
uintptr_t v, x, tid;
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
struct turnstile *ts;
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
int success;
Add destroyed cookie values for sx locks and rwlocks as well as extra KASSERTs so that any lock operations on a destroyed lock will panic or hang.
2007-05-08 21:51:37 +00:00
KASSERT(rw->rw_lock != RW_DESTROYED,
("rw_try_upgrade() of destroyed rwlock @ %s:%d", file, line));
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
_rw_assert(rw, RA_RLOCKED, file, line);
/*
* Attempt to switch from one reader to a writer. If there
* are any write waiters, then we will have to lock the
* turnstile first to prevent races with another writer
* calling turnstile_wait() before we have claimed this
* turnstile. So, do the simple case of no waiters first.
*/
tid = (uintptr_t)curthread;
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
success = 0;
for (;;) {
v = rw->rw_lock;
if (RW_READERS(v) > 1)
break;
if (!(v & RW_LOCK_WAITERS)) {
success = atomic_cmpset_ptr(&rw->rw_lock, v, tid);
if (!success)
continue;
break;
}
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
/*
* Ok, we think we have waiters, so lock the turnstile.
*/
ts = turnstile_trywait(&rw->lock_object);
v = rw->rw_lock;
if (RW_READERS(v) > 1) {
turnstile_cancel(ts);
break;
}
/*
* Try to switch from one reader to a writer again. This time
* we honor the current state of the waiters flags.
* If we obtain the lock with the flags set, then claim
* ownership of the turnstile.
*/
x = rw->rw_lock & RW_LOCK_WAITERS;
success = atomic_cmpset_ptr(&rw->rw_lock, v, tid | x);
if (success) {
if (x)
turnstile_claim(ts);
else
turnstile_cancel(ts);
break;
}
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_cancel(ts);
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
}
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
LOCK_LOG_TRY("WUPGRADE", &rw->lock_object, 0, success, file, line);
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
if (success) {
curthread->td_rw_rlocks--;
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
WITNESS_UPGRADE(&rw->lock_object, LOP_EXCLUSIVE | LOP_TRYLOCK,
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
file, line);
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
}
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
return (success);
}
/*
* Downgrade a write lock into a single read lock.
*/
void
_rw_downgrade(struct rwlock *rw, const char *file, int line)
{
struct turnstile *ts;
uintptr_t tid, v;
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
int rwait, wwait;
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
Add destroyed cookie values for sx locks and rwlocks as well as extra KASSERTs so that any lock operations on a destroyed lock will panic or hang.
2007-05-08 21:51:37 +00:00
KASSERT(rw->rw_lock != RW_DESTROYED,
("rw_downgrade() of destroyed rwlock @ %s:%d", file, line));
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
_rw_assert(rw, RA_WLOCKED | RA_NOTRECURSED, file, line);
#ifndef INVARIANTS
if (rw_recursed(rw))
panic("downgrade of a recursed lock");
#endif
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
WITNESS_DOWNGRADE(&rw->lock_object, 0, file, line);
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
/*
* Convert from a writer to a single reader. First we handle
* the easy case with no waiters. If there are any waiters, we
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
* lock the turnstile and "disown" the lock.
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
*/
tid = (uintptr_t)curthread;
if (atomic_cmpset_rel_ptr(&rw->rw_lock, tid, RW_READERS_LOCK(1)))
goto out;
/*
* Ok, we think we have waiters, so lock the turnstile so we can
* read the waiter flags without any races.
*/
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_chain_lock(&rw->lock_object);
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
v = rw->rw_lock & RW_LOCK_WAITERS;
rwait = v & RW_LOCK_READ_WAITERS;
wwait = v & RW_LOCK_WRITE_WAITERS;
MPASS(rwait | wwait);
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
/*
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
* Downgrade from a write lock while preserving waiters flag
* and give up ownership of the turnstile.
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
*/
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
ts = turnstile_lookup(&rw->lock_object);
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
MPASS(ts != NULL);
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
if (!wwait)
v &= ~RW_LOCK_READ_WAITERS;
atomic_store_rel_ptr(&rw->rw_lock, RW_READERS_LOCK(1) | v);
/*
* Wake other readers if there are no writers pending. Otherwise they
* won't be able to acquire the lock anyway.
*/
if (rwait && !wwait) {
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
turnstile_broadcast(ts, TS_SHARED_QUEUE);
turnstile_unpend(ts, TS_EXCLUSIVE_LOCK);
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
} else
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
turnstile_disown(ts);
Commit 3/14 of sched_lock decomposition. - Add a per-turnstile spinlock to solve potential priority propagation deadlocks that are possible with thread_lock(). - The turnstile lock order is defined as the exact opposite of the lock order used with the sleep locks they represent. This allows us to walk in reverse order in priority_propagate and this is the only place we wish to multiply acquire turnstile locks. - Use the turnstile_chain lock to protect assigning mutexes to turnstiles. - Change the turnstile interface to pass back turnstile pointers to the consumers. This allows us to reduce some locking and makes it easier to cancel turnstile assignment while the turnstile chain lock is held. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:51:44 +00:00
turnstile_chain_unlock(&rw->lock_object);
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
out:
Adaptive spinning in write path with readers and writer starvation avoidance. - Move recursion checking into rwlock inlines to free a bit for use with adaptive spinners. - Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes causing write spinners to restart their loop. - Write spinners are limited by a count while readers hold the lock as there is no way to know for certain whether readers are running still. - In the read path block if there are write waiters or spinners to avoid starving writers. Use a new per-thread count, td_rw_rlocks, to skip starvation avoidance if it might cause a deadlock. - Remove or change invalid assertions in turnstiles. Reviewed by: attilio (developed parts of the patch as well) Sponsored by: Nokia
2008-02-06 01:02:13 +00:00
curthread->td_rw_rlocks++;
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
LOCK_LOG_LOCK("WDOWNGRADE", &rw->lock_object, 0, 0, file, line);
Implement rw_try_upgrade() and rw_downgrade(). rw_try_upgrade() makes a single attempt at upgrading a read lock to a write lock, and rw_downgrade() converts curthread's write lock into a read lock.
2006-04-19 21:06:52 +00:00
}
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#ifdef INVARIANT_SUPPORT
Fix another compile problem. If I find any more, this file is going in the Attic until it is properly fixed.
2006-02-01 04:18:07 +00:00
#ifndef INVARIANTS
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#undef _rw_assert
#endif
/*
* In the non-WITNESS case, rw_assert() can only detect that at least
* *some* thread owns an rlock, but it cannot guarantee that *this*
* thread owns an rlock.
*/
void
_rw_assert(struct rwlock *rw, int what, const char *file, int line)
{
if (panicstr != NULL)
return;
switch (what) {
case RA_LOCKED:
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
case RA_LOCKED | RA_RECURSED:
case RA_LOCKED | RA_NOTRECURSED:
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
case RA_RLOCKED:
#ifdef WITNESS
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
witness_assert(&rw->lock_object, what, file, line);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#else
/*
* If some other thread has a write lock or we have one
* and are asserting a read lock, fail. Also, if no one
* has a lock at all, fail.
*/
Regroup order of operations to better reflect what was probably intended. Submitted by: Peter Jeremy
2006-01-30 19:25:52 +00:00
if (rw->rw_lock == RW_UNLOCKED ||
(!(rw->rw_lock & RW_LOCK_READ) && (what == RA_RLOCKED ||
- Add a rw_wowner() macro that just returns the owner of a write lock and use it in places that only care about the write owner instead of rw_owner() as a baby step towards limited read-lock owner. - Tidy the code that sets the WAITER flag bits to not duplicate a test around the atomic operation and the KTR trace in both of the lock functions.
2006-04-17 21:11:01 +00:00
rw_wowner(rw) != curthread)))
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
panic("Lock %s not %slocked @ %s:%d\n",
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
rw->lock_object.lo_name, (what == RA_RLOCKED) ?
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
"read " : "", file, line);
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
if (!(rw->rw_lock & RW_LOCK_READ)) {
if (rw_recursed(rw)) {
if (what & RA_NOTRECURSED)
panic("Lock %s recursed @ %s:%d\n",
rw->lock_object.lo_name, file,
line);
} else if (what & RA_RECURSED)
panic("Lock %s not recursed @ %s:%d\n",
rw->lock_object.lo_name, file, line);
}
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#endif
break;
case RA_WLOCKED:
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
case RA_WLOCKED | RA_RECURSED:
case RA_WLOCKED | RA_NOTRECURSED:
- Add a rw_wowner() macro that just returns the owner of a write lock and use it in places that only care about the write owner instead of rw_owner() as a baby step towards limited read-lock owner. - Tidy the code that sets the WAITER flag bits to not duplicate a test around the atomic operation and the KTR trace in both of the lock functions.
2006-04-17 21:11:01 +00:00
if (rw_wowner(rw) != curthread)
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
panic("Lock %s not exclusively locked @ %s:%d\n",
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
rw->lock_object.lo_name, file, line);
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
if (rw_recursed(rw)) {
if (what & RA_NOTRECURSED)
panic("Lock %s recursed @ %s:%d\n",
rw->lock_object.lo_name, file, line);
} else if (what & RA_RECURSED)
panic("Lock %s not recursed @ %s:%d\n",
rw->lock_object.lo_name, file, line);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
break;
case RA_UNLOCKED:
#ifdef WITNESS
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
witness_assert(&rw->lock_object, what, file, line);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#else
/*
* If we hold a write lock fail. We can't reliably check
* to see if we hold a read lock or not.
*/
- Add a rw_wowner() macro that just returns the owner of a write lock and use it in places that only care about the write owner instead of rw_owner() as a baby step towards limited read-lock owner. - Tidy the code that sets the WAITER flag bits to not duplicate a test around the atomic operation and the KTR trace in both of the lock functions.
2006-04-17 21:11:01 +00:00
if (rw_wowner(rw) == curthread)
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
panic("Lock %s exclusively locked @ %s:%d\n",
Rename the 'mtx_object', 'rw_object', and 'sx_object' members of mutexes, rwlocks, and sx locks to 'lock_object'.
2007-03-21 21:20:51 +00:00
rw->lock_object.lo_name, file, line);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
#endif
break;
default:
panic("Unknown rw lock assertion: %d @ %s:%d", what, file,
line);
}
}
#endif /* INVARIANT_SUPPORT */
#ifdef DDB
void
db_show_rwlock(struct lock_object *lock)
{
struct rwlock *rw;
struct thread *td;
rw = (struct rwlock *)lock;
db_printf(" state: ");
if (rw->rw_lock == RW_UNLOCKED)
db_printf("UNLOCKED\n");
Add destroyed cookie values for sx locks and rwlocks as well as extra KASSERTs so that any lock operations on a destroyed lock will panic or hang.
2007-05-08 21:51:37 +00:00
else if (rw->rw_lock == RW_DESTROYED) {
db_printf("DESTROYED\n");
return;
} else if (rw->rw_lock & RW_LOCK_READ)
Print readers count as unsigned in ddb 'show lock'. Submitted by: attilio
2007-03-13 16:51:27 +00:00
db_printf("RLOCK: %ju locks\n",
(uintmax_t)(RW_READERS(rw->rw_lock)));
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
else {
- Add a rw_wowner() macro that just returns the owner of a write lock and use it in places that only care about the write owner instead of rw_owner() as a baby step towards limited read-lock owner. - Tidy the code that sets the WAITER flag bits to not duplicate a test around the atomic operation and the KTR trace in both of the lock functions.
2006-04-17 21:11:01 +00:00
td = rw_wowner(rw);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
db_printf("WLOCK: %p (tid %d, pid %d, \"%s\")\n", td,
generally we are interested in what thread did something as opposed to what process. Since threads by default have teh name of the process unless over-written with more useful information, just print the thread name instead.
2007-11-14 06:21:24 +00:00
td->td_tid, td->td_proc->p_pid, td->td_name);
Introduce a new rwlocks initialization function: rw_init_flags. This is very similar to sx_init_flags: it initializes the rwlock using special flags passed as third argument (RW_DUPOK, RW_NOPROFILE, RW_NOWITNESS, RW_QUIET, RW_RECURSE). Among these, the most important new feature is probabilly that rwlocks can be acquired recursively now (for both shared and exclusive paths). Because of the recursion counter, the ABI is changed. Tested by: Timothy Redaelli <drizzt@gufi.org> Reviewed by: jhb Approved by: jeff (mentor) Approved by: re
2007-06-26 21:31:56 +00:00
if (rw_recursed(rw))
db_printf(" recursed: %u\n", rw->rw_recurse);
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
}
db_printf(" waiters: ");
switch (rw->rw_lock & (RW_LOCK_READ_WAITERS | RW_LOCK_WRITE_WAITERS)) {
case RW_LOCK_READ_WAITERS:
db_printf("readers\n");
break;
case RW_LOCK_WRITE_WAITERS:
db_printf("writers\n");
break;
case RW_LOCK_READ_WAITERS | RW_LOCK_WRITE_WAITERS:
Fix a typo.
2007-03-12 20:10:29 +00:00
db_printf("readers and writers\n");
Add a basic reader/writer lock implementation to the kernel. This implementation is by no means perfect as far as some of the algorithms that it uses and the fact that it is missing some functionality (try locks and upgrades/downgrades are not there yet), however it does seem to work in my local testing. There is more detail in the comments in the code, but the short version follows. A reader/writer lock is very much like a regular mutex: it cannot be held across a voluntary sleep; it can be acquired in an interrupt thread; if the lock is held by a writer then the priority of any threads that block on the lock will be lent to the owner; the simple case lock operations all are done in a single atomic op. It also shares some similiarities with sx locks: it supports reader/writer semantics (multiple readers, but single writers); readers are allowed to recurse, but writers are not. We can extend this implementation further by either improving algorithms or adding new functionality, but this should at least give us a base to work with now. Reviewed by: arch (in theory) Tested on: i386 (4 cpu box with a kernel module that used 4 threads that randomly chose between read locks and write locks that ran w/o panicing for over a day solid. It usually panic'd within a few seconds when there were bugs during testing. :) The kernel module source is available on request.)
2006-01-27 23:13:26 +00:00
break;
default:
db_printf("none\n");
break;
}
}
#endif
Reference in New Issue Copy Permalink