d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
869c7348e5
freebsd-skq/sys/net/if_clone.c

623 lines
14 KiB
C
Raw Normal View History

/* -> /*- for license, minor formatting changes
2005-01-07 01:45:51 +00:00
/*-
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
* Copyright (c) 1980, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)if.c 8.5 (Berkeley) 1/9/95
* $FreeBSD$
*/
#include <sys/param.h>
#include <sys/malloc.h>
Fix the following bugs: - In ifc_name2unit(), disallow leading zeroes in a unit. Exploit: ifconfig lo01 create - In ifc_name2unit(), properly handle overflows. Otherwise, either of two local panic()'s can occur, either because no interface with such a name could be found after it was successfully created, or because the code will bogusly assume that it's a wildcard (unit < 0 due to overflow). Exploit: ifconfig lo<overflowed_integer> create - Previous revision made the following sequence trigger a KASSERT() failure in queue(3): Exploit: ifconfig lo0 destroy; ifconfig lo0 destroy This is because IFC_IFLIST_REMOVE() is always called before ifc->ifc_destroy() has been run, not accounting for the fact that the latter can fail and leave the interface operating (like is the case for "lo0"). So we ended up calling LIST_REMOVE() twice. We cannot defer IFC_IFLIST_REMOVE() until after a call to ifc->ifc_destroy() because the ifnet may have been removed and its memory has been freed, so recover from this by re-inserting the ifnet in the cloned interfaces list if ifc->ifc_destroy() indicates a failure.
2005-11-24 18:56:14 +00:00
#include <sys/limits.h>
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/types.h>
#include <sys/socket.h>
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
#include <sys/vimage.h>
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
#include <net/if.h>
#include <net/if_clone.h>
#if 0
#include <net/if_dl.h>
#endif
#include <net/if_types.h>
#include <net/if_var.h>
#include <net/radix.h>
#include <net/route.h>
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
#include <net/vnet.h>
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
Move the cloned interface list management in to if_clone. For some drivers the softc lists and associated mutex are now unused so these have been removed. Calling if_clone_detach() will now destroy all the cloned interfaces for the driver and in most cases is all thats needed to unload. Idea by: brooks Reviewed by: brooks
2005-11-08 20:08:34 +00:00
static void if_clone_free(struct if_clone *ifc);
Revise network interface cloning to take an optional opaque parameter that can specify configuration parameters: o rev cloner api's to add optional parameter block o add SIOCCREATE2 that accepts parameter data o rev vlan support to use new api (maintain old code) Reviewed by: arch@
2006-07-09 06:04:01 +00:00
static int if_clone_createif(struct if_clone *ifc, char *name, size_t len,
caddr_t params);
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
static int vnet_clone_iattach(const void *);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
static struct mtx if_cloners_mtx;
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
#ifdef VIMAGE_GLOBALS
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
static int if_cloners_count;
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
LIST_HEAD(, if_clone) if_cloners;
#endif
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
#define IF_CLONERS_LOCK_INIT() \
mtx_init(&if_cloners_mtx, "if_cloners lock", NULL, MTX_DEF)
#define IF_CLONERS_LOCK_ASSERT() mtx_assert(&if_cloners_mtx, MA_OWNED)
#define IF_CLONERS_LOCK() mtx_lock(&if_cloners_mtx)
#define IF_CLONERS_UNLOCK() mtx_unlock(&if_cloners_mtx)
#define IF_CLONE_LOCK_INIT(ifc) \
mtx_init(&(ifc)->ifc_mtx, "if_clone lock", NULL, MTX_DEF)
#define IF_CLONE_LOCK_DESTROY(ifc) mtx_destroy(&(ifc)->ifc_mtx)
#define IF_CLONE_LOCK_ASSERT(ifc) mtx_assert(&(ifc)->ifc_mtx, MA_OWNED)
#define IF_CLONE_LOCK(ifc) mtx_lock(&(ifc)->ifc_mtx)
#define IF_CLONE_UNLOCK(ifc) mtx_unlock(&(ifc)->ifc_mtx)
#define IF_CLONE_ADDREF(ifc) \
do { \
IF_CLONE_LOCK(ifc); \
IF_CLONE_ADDREF_LOCKED(ifc); \
IF_CLONE_UNLOCK(ifc); \
} while (0)
#define IF_CLONE_ADDREF_LOCKED(ifc) \
do { \
IF_CLONE_LOCK_ASSERT(ifc); \
KASSERT((ifc)->ifc_refcnt >= 0, \
("negative refcnt %ld", (ifc)->ifc_refcnt)); \
(ifc)->ifc_refcnt++; \
} while (0)
#define IF_CLONE_REMREF(ifc) \
do { \
IF_CLONE_LOCK(ifc); \
IF_CLONE_REMREF_LOCKED(ifc); \
} while (0)
#define IF_CLONE_REMREF_LOCKED(ifc) \
do { \
IF_CLONE_LOCK_ASSERT(ifc); \
KASSERT((ifc)->ifc_refcnt > 0, \
("bogus refcnt %ld", (ifc)->ifc_refcnt)); \
if (--(ifc)->ifc_refcnt == 0) { \
IF_CLONE_UNLOCK(ifc); \
if_clone_free(ifc); \
When removing the last reference to a cloner, do not try to unlock twice - esp. not since the backing memory was just freed. Reviewed by: rwatson
2004-07-20 21:44:28 +00:00
} else { \
/* silently free the lock */ \
IF_CLONE_UNLOCK(ifc); \
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
} \
} while (0)
Move the cloned interface list management in to if_clone. For some drivers the softc lists and associated mutex are now unused so these have been removed. Calling if_clone_detach() will now destroy all the cloned interfaces for the driver and in most cases is all thats needed to unload. Idea by: brooks Reviewed by: brooks
2005-11-08 20:08:34 +00:00
#define IFC_IFLIST_INSERT(_ifc, _ifp) \
LIST_INSERT_HEAD(&_ifc->ifc_iflist, _ifp, if_clones)
#define IFC_IFLIST_REMOVE(_ifc, _ifp) \
LIST_REMOVE(_ifp, if_clones)
Make a bunch of malloc types static. Found by: src/tools/tools/kernxref
2005-02-10 12:02:37 +00:00
static MALLOC_DEFINE(M_CLONE, "clone", "interface cloning framework");
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
#ifndef VIMAGE_GLOBALS
static const vnet_modinfo_t vnet_clone_modinfo = {
.vmi_id = VNET_MOD_IF_CLONE,
.vmi_name = "if_clone",
.vmi_iattach = vnet_clone_iattach
};
#endif /* !VIMAGE_GLOBALS */
static int vnet_clone_iattach(const void *unused __unused)
{
INIT_VNET_NET(curvnet);
LIST_INIT(&V_if_cloners);
return (0);
}
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
void
if_clone_init(void)
{
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
IF_CLONERS_LOCK_INIT();
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
#ifndef VIMAGE_GLOBALS
vnet_mod_register(&vnet_clone_modinfo);
#else
vnet_clone_iattach(NULL);
#endif
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
}
/*
Move the cloned interface list management in to if_clone. For some drivers the softc lists and associated mutex are now unused so these have been removed. Calling if_clone_detach() will now destroy all the cloned interfaces for the driver and in most cases is all thats needed to unload. Idea by: brooks Reviewed by: brooks
2005-11-08 20:08:34 +00:00
* Lookup and create a clone network interface.
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
*/
int
Revise network interface cloning to take an optional opaque parameter that can specify configuration parameters: o rev cloner api's to add optional parameter block o add SIOCCREATE2 that accepts parameter data o rev vlan support to use new api (maintain old code) Reviewed by: arch@
2006-07-09 06:04:01 +00:00
if_clone_create(char *name, size_t len, caddr_t params)
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
{
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
INIT_VNET_NET(curvnet);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
struct if_clone *ifc;
/* Try to find an applicable cloner for this request */
IF_CLONERS_LOCK();
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
LIST_FOREACH(ifc, &V_if_cloners, ifc_list) {
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
if (ifc->ifc_match(ifc, name)) {
break;
}
}
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
#ifdef VIMAGE
if (ifc == NULL && !IS_DEFAULT_VNET(curvnet)) {
CURVNET_SET_QUIET(vnet0);
INIT_VNET_NET(vnet0);
LIST_FOREACH(ifc, &V_if_cloners, ifc_list) {
if (ifc->ifc_match(ifc, name))
break;
}
CURVNET_RESTORE();
}
#endif
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
IF_CLONERS_UNLOCK();
if (ifc == NULL)
return (EINVAL);
Revise network interface cloning to take an optional opaque parameter that can specify configuration parameters: o rev cloner api's to add optional parameter block o add SIOCCREATE2 that accepts parameter data o rev vlan support to use new api (maintain old code) Reviewed by: arch@
2006-07-09 06:04:01 +00:00
return (if_clone_createif(ifc, name, len, params));
Move the cloned interface list management in to if_clone. For some drivers the softc lists and associated mutex are now unused so these have been removed. Calling if_clone_detach() will now destroy all the cloned interfaces for the driver and in most cases is all thats needed to unload. Idea by: brooks Reviewed by: brooks
2005-11-08 20:08:34 +00:00
}
/*
* Create a clone network interface.
*/
static int
Revise network interface cloning to take an optional opaque parameter that can specify configuration parameters: o rev cloner api's to add optional parameter block o add SIOCCREATE2 that accepts parameter data o rev vlan support to use new api (maintain old code) Reviewed by: arch@
2006-07-09 06:04:01 +00:00
if_clone_createif(struct if_clone *ifc, char *name, size_t len, caddr_t params)
Move the cloned interface list management in to if_clone. For some drivers the softc lists and associated mutex are now unused so these have been removed. Calling if_clone_detach() will now destroy all the cloned interfaces for the driver and in most cases is all thats needed to unload. Idea by: brooks Reviewed by: brooks
2005-11-08 20:08:34 +00:00
{
int err;
struct ifnet *ifp;
if (ifunit(name) != NULL)
return (EEXIST);
Revise network interface cloning to take an optional opaque parameter that can specify configuration parameters: o rev cloner api's to add optional parameter block o add SIOCCREATE2 that accepts parameter data o rev vlan support to use new api (maintain old code) Reviewed by: arch@
2006-07-09 06:04:01 +00:00
err = (*ifc->ifc_create)(ifc, name, len, params);
Move the cloned interface list management in to if_clone. For some drivers the softc lists and associated mutex are now unused so these have been removed. Calling if_clone_detach() will now destroy all the cloned interfaces for the driver and in most cases is all thats needed to unload. Idea by: brooks Reviewed by: brooks
2005-11-08 20:08:34 +00:00
if (!err) {
ifp = ifunit(name);
if (ifp == NULL)
panic("%s: lookup failed for %s", __func__, name);
Import interface groups from OpenBSD. This allows to group interfaces in order to - for example - apply firewall rules to a whole group of interfaces. This is required for importing pf from OpenBSD 3.9 Obtained from: OpenBSD (with changes) Discussed on: -net (back in April)
2006-06-19 22:20:45 +00:00
if_addgroup(ifp, ifc->ifc_name);
Move the cloned interface list management in to if_clone. For some drivers the softc lists and associated mutex are now unused so these have been removed. Calling if_clone_detach() will now destroy all the cloned interfaces for the driver and in most cases is all thats needed to unload. Idea by: brooks Reviewed by: brooks
2005-11-08 20:08:34 +00:00
IF_CLONE_LOCK(ifc);
IFC_IFLIST_INSERT(ifc, ifp);
IF_CLONE_UNLOCK(ifc);
}
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
return (err);
}
/*
Move the cloned interface list management in to if_clone. For some drivers the softc lists and associated mutex are now unused so these have been removed. Calling if_clone_detach() will now destroy all the cloned interfaces for the driver and in most cases is all thats needed to unload. Idea by: brooks Reviewed by: brooks
2005-11-08 20:08:34 +00:00
* Lookup and destroy a clone network interface.
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
*/
int
if_clone_destroy(const char *name)
{
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
INIT_VNET_NET(curvnet);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
struct if_clone *ifc;
struct ifnet *ifp;
ifp = ifunit(name);
if (ifp == NULL)
return (ENXIO);
/* Find the cloner for this interface */
IF_CLONERS_LOCK();
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
LIST_FOREACH(ifc, &V_if_cloners, ifc_list) {
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
if (strcmp(ifc->ifc_name, ifp->if_dname) == 0) {
break;
}
}
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
#ifdef VIMAGE
if (ifc == NULL && !IS_DEFAULT_VNET(curvnet)) {
CURVNET_SET_QUIET(vnet0);
INIT_VNET_NET(vnet0);
LIST_FOREACH(ifc, &V_if_cloners, ifc_list) {
if (ifc->ifc_match(ifc, name))
break;
}
CURVNET_RESTORE();
}
#endif
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
IF_CLONERS_UNLOCK();
if (ifc == NULL)
return (EINVAL);
Move the cloned interface list management in to if_clone. For some drivers the softc lists and associated mutex are now unused so these have been removed. Calling if_clone_detach() will now destroy all the cloned interfaces for the driver and in most cases is all thats needed to unload. Idea by: brooks Reviewed by: brooks
2005-11-08 20:08:34 +00:00
return (if_clone_destroyif(ifc, ifp));
}
/*
* Destroy a clone network interface.
*/
Fix clone destruction, can't use the simple api because that does not remove the ifnet from cloner's list. Expose if_clone_destroyif api to do this. Submitted by: sam
2008-09-20 19:38:37 +00:00
int
Move the cloned interface list management in to if_clone. For some drivers the softc lists and associated mutex are now unused so these have been removed. Calling if_clone_detach() will now destroy all the cloned interfaces for the driver and in most cases is all thats needed to unload. Idea by: brooks Reviewed by: brooks
2005-11-08 20:08:34 +00:00
if_clone_destroyif(struct if_clone *ifc, struct ifnet *ifp)
{
int err;
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
if (ifc->ifc_destroy == NULL)
return(EOPNOTSUPP);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
/*
* Given that the cloned ifnet might be attached to a different
* vnet from where its cloner was registered, we have to
* switch to the vnet context of the target vnet.
*/
CURVNET_SET_QUIET(ifp->if_vnet);
Fix the following bugs: - In ifc_name2unit(), disallow leading zeroes in a unit. Exploit: ifconfig lo01 create - In ifc_name2unit(), properly handle overflows. Otherwise, either of two local panic()'s can occur, either because no interface with such a name could be found after it was successfully created, or because the code will bogusly assume that it's a wildcard (unit < 0 due to overflow). Exploit: ifconfig lo<overflowed_integer> create - Previous revision made the following sequence trigger a KASSERT() failure in queue(3): Exploit: ifconfig lo0 destroy; ifconfig lo0 destroy This is because IFC_IFLIST_REMOVE() is always called before ifc->ifc_destroy() has been run, not accounting for the fact that the latter can fail and leave the interface operating (like is the case for "lo0"). So we ended up calling LIST_REMOVE() twice. We cannot defer IFC_IFLIST_REMOVE() until after a call to ifc->ifc_destroy() because the ifnet may have been removed and its memory has been freed, so recover from this by re-inserting the ifnet in the cloned interfaces list if ifc->ifc_destroy() indicates a failure.
2005-11-24 18:56:14 +00:00
IF_CLONE_LOCK(ifc);
IFC_IFLIST_REMOVE(ifc, ifp);
IF_CLONE_UNLOCK(ifc);
Import interface groups from OpenBSD. This allows to group interfaces in order to - for example - apply firewall rules to a whole group of interfaces. This is required for importing pf from OpenBSD 3.9 Obtained from: OpenBSD (with changes) Discussed on: -net (back in April)
2006-06-19 22:20:45 +00:00
if_delgroup(ifp, ifc->ifc_name);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
err = (*ifc->ifc_destroy)(ifc, ifp);
Fix the following bugs: - In ifc_name2unit(), disallow leading zeroes in a unit. Exploit: ifconfig lo01 create - In ifc_name2unit(), properly handle overflows. Otherwise, either of two local panic()'s can occur, either because no interface with such a name could be found after it was successfully created, or because the code will bogusly assume that it's a wildcard (unit < 0 due to overflow). Exploit: ifconfig lo<overflowed_integer> create - Previous revision made the following sequence trigger a KASSERT() failure in queue(3): Exploit: ifconfig lo0 destroy; ifconfig lo0 destroy This is because IFC_IFLIST_REMOVE() is always called before ifc->ifc_destroy() has been run, not accounting for the fact that the latter can fail and leave the interface operating (like is the case for "lo0"). So we ended up calling LIST_REMOVE() twice. We cannot defer IFC_IFLIST_REMOVE() until after a call to ifc->ifc_destroy() because the ifnet may have been removed and its memory has been freed, so recover from this by re-inserting the ifnet in the cloned interfaces list if ifc->ifc_destroy() indicates a failure.
2005-11-24 18:56:14 +00:00
if (err != 0) {
Import interface groups from OpenBSD. This allows to group interfaces in order to - for example - apply firewall rules to a whole group of interfaces. This is required for importing pf from OpenBSD 3.9 Obtained from: OpenBSD (with changes) Discussed on: -net (back in April)
2006-06-19 22:20:45 +00:00
if_addgroup(ifp, ifc->ifc_name);
Fix the following bugs: - In ifc_name2unit(), disallow leading zeroes in a unit. Exploit: ifconfig lo01 create - In ifc_name2unit(), properly handle overflows. Otherwise, either of two local panic()'s can occur, either because no interface with such a name could be found after it was successfully created, or because the code will bogusly assume that it's a wildcard (unit < 0 due to overflow). Exploit: ifconfig lo<overflowed_integer> create - Previous revision made the following sequence trigger a KASSERT() failure in queue(3): Exploit: ifconfig lo0 destroy; ifconfig lo0 destroy This is because IFC_IFLIST_REMOVE() is always called before ifc->ifc_destroy() has been run, not accounting for the fact that the latter can fail and leave the interface operating (like is the case for "lo0"). So we ended up calling LIST_REMOVE() twice. We cannot defer IFC_IFLIST_REMOVE() until after a call to ifc->ifc_destroy() because the ifnet may have been removed and its memory has been freed, so recover from this by re-inserting the ifnet in the cloned interfaces list if ifc->ifc_destroy() indicates a failure.
2005-11-24 18:56:14 +00:00
IF_CLONE_LOCK(ifc);
IFC_IFLIST_INSERT(ifc, ifp);
IF_CLONE_UNLOCK(ifc);
}
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
CURVNET_RESTORE();
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
return (err);
}
/*
* Register a network interface cloner.
*/
void
if_clone_attach(struct if_clone *ifc)
{
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
INIT_VNET_NET(curvnet);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
int len, maxclone;
/*
* Compute bitmap size and allocate it.
*/
maxclone = ifc->ifc_maxunit + 1;
len = maxclone >> 3;
if ((len << 3) < maxclone)
len++;
ifc->ifc_units = malloc(len, M_CLONE, M_WAITOK | M_ZERO);
ifc->ifc_bmlen = len;
IF_CLONE_LOCK_INIT(ifc);
IF_CLONE_ADDREF(ifc);
IF_CLONERS_LOCK();
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
LIST_INSERT_HEAD(&V_if_cloners, ifc, ifc_list);
V_if_cloners_count++;
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
IF_CLONERS_UNLOCK();
Move the cloned interface list management in to if_clone. For some drivers the softc lists and associated mutex are now unused so these have been removed. Calling if_clone_detach() will now destroy all the cloned interfaces for the driver and in most cases is all thats needed to unload. Idea by: brooks Reviewed by: brooks
2005-11-08 20:08:34 +00:00
LIST_INIT(&ifc->ifc_iflist);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
if (ifc->ifc_attach != NULL)
(*ifc->ifc_attach)(ifc);
EVENTHANDLER_INVOKE(if_clone_event, ifc);
}
/*
* Unregister a network interface cloner.
*/
void
if_clone_detach(struct if_clone *ifc)
{
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
INIT_VNET_NET(curvnet);
Change the reference counting to count the number of cloned interfaces for each cloner. This ensures that ifc->ifc_units is not prematurely freed in if_clone_detach() before the clones are destroyed, resulting in memory modified after free. This could be triggered with if_vlan. Assert that all cloners have been destroyed when freeing the memory. Change all simple cloners to destroy their clones with ifc_simple_destroy() on module unload so the reference count is properly updated. This also cleans up the interface destroy routines and allows future optimisation. Discussed with: brooks, pjd, -current Reviewed by: brooks
2005-10-12 19:52:16 +00:00
struct ifc_simple_data *ifcs = ifc->ifc_data;
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
IF_CLONERS_LOCK();
LIST_REMOVE(ifc, ifc_list);
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
V_if_cloners_count--;
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
IF_CLONERS_UNLOCK();
Change the reference counting to count the number of cloned interfaces for each cloner. This ensures that ifc->ifc_units is not prematurely freed in if_clone_detach() before the clones are destroyed, resulting in memory modified after free. This could be triggered with if_vlan. Assert that all cloners have been destroyed when freeing the memory. Change all simple cloners to destroy their clones with ifc_simple_destroy() on module unload so the reference count is properly updated. This also cleans up the interface destroy routines and allows future optimisation. Discussed with: brooks, pjd, -current Reviewed by: brooks
2005-10-12 19:52:16 +00:00
/* Allow all simples to be destroyed */
if (ifc->ifc_attach == ifc_simple_attach)
ifcs->ifcs_minifs = 0;
Move the cloned interface list management in to if_clone. For some drivers the softc lists and associated mutex are now unused so these have been removed. Calling if_clone_detach() will now destroy all the cloned interfaces for the driver and in most cases is all thats needed to unload. Idea by: brooks Reviewed by: brooks
2005-11-08 20:08:34 +00:00
/* destroy all interfaces for this cloner */
while (!LIST_EMPTY(&ifc->ifc_iflist))
if_clone_destroyif(ifc, LIST_FIRST(&ifc->ifc_iflist));
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
IF_CLONE_REMREF(ifc);
}
static void
if_clone_free(struct if_clone *ifc)
{
Change the reference counting to count the number of cloned interfaces for each cloner. This ensures that ifc->ifc_units is not prematurely freed in if_clone_detach() before the clones are destroyed, resulting in memory modified after free. This could be triggered with if_vlan. Assert that all cloners have been destroyed when freeing the memory. Change all simple cloners to destroy their clones with ifc_simple_destroy() on module unload so the reference count is properly updated. This also cleans up the interface destroy routines and allows future optimisation. Discussed with: brooks, pjd, -current Reviewed by: brooks
2005-10-12 19:52:16 +00:00
for (int bytoff = 0; bytoff < ifc->ifc_bmlen; bytoff++) {
KASSERT(ifc->ifc_units[bytoff] == 0x00,
("ifc_units[%d] is not empty", bytoff));
}
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
Move the cloned interface list management in to if_clone. For some drivers the softc lists and associated mutex are now unused so these have been removed. Calling if_clone_detach() will now destroy all the cloned interfaces for the driver and in most cases is all thats needed to unload. Idea by: brooks Reviewed by: brooks
2005-11-08 20:08:34 +00:00
KASSERT(LIST_EMPTY(&ifc->ifc_iflist),
("%s: ifc_iflist not empty", __func__));
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
IF_CLONE_LOCK_DESTROY(ifc);
free(ifc->ifc_units, M_CLONE);
}
/*
* Provide list of interface cloners to userspace.
*/
int
if_clone_list(struct if_clonereq *ifcr)
{
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
INIT_VNET_NET(curvnet);
Fix a LOR where copyout was called while holding a lock. Reported by: rwatson
2004-09-15 04:41:56 +00:00
char *buf, *dst, *outbuf = NULL;
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
struct if_clone *ifc;
Fix a LOR where copyout was called while holding a lock. Reported by: rwatson
2004-09-15 04:41:56 +00:00
int buf_count, count, err = 0;
o Move ifcr_count sanity check up and reject negative values before we panic at kmem_alloc() via malloc(9). PR: kern/77748 Submitted by: Wojciech A. Koszek OK'ed by: brooks Security: local DoS, a sample code in the PR. MFC after: 3 days
2005-02-24 13:14:41 +00:00
if (ifcr->ifcr_count < 0)
return (EINVAL);
Fix a LOR where copyout was called while holding a lock. Reported by: rwatson
2004-09-15 04:41:56 +00:00
IF_CLONERS_LOCK();
/*
* Set our internal output buffer size. We could end up not
* reporting a cloner that is added between the unlock and lock
* below, but that's not a major problem. Not caping our
* allocation to the number of cloners actually in the system
* could be because that would let arbitrary users cause us to
* allocate abritrary amounts of kernel memory.
*/
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
buf_count = (V_if_cloners_count < ifcr->ifcr_count) ?
V_if_cloners_count : ifcr->ifcr_count;
Fix a LOR where copyout was called while holding a lock. Reported by: rwatson
2004-09-15 04:41:56 +00:00
IF_CLONERS_UNLOCK();
outbuf = malloc(IFNAMSIZ*buf_count, M_CLONE, M_WAITOK | M_ZERO);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
IF_CLONERS_LOCK();
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
ifcr->ifcr_total = V_if_cloners_count;
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
if ((dst = ifcr->ifcr_buffer) == NULL) {
/* Just asking how many there are. */
goto done;
}
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
count = (V_if_cloners_count < buf_count) ?
V_if_cloners_count : buf_count;
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
V_irtualize the if_clone framework, thus allowing for clonable ifnets to optionally have overlapping unit numbers if attached in different vnets. At this stage if_loop is the only clonable ifnet class that has been extended to allow for such overlapping allocation of unit numbers, i.e. in each vnet it is possible to have a lo0 interface. Other clonable ifnet classes remain to operate with traditional semantics, i.e. each instance of a clonable ifnet will be assigned a globally unique unit number, regardless in which vnet such an ifnet becomes instantiated. While here, garbage collect unused _lo_list field in struct vnet_net, as well as improve indentation for #defines in sys/net/vnet.h. The layout of struct vnet_net has changed, therefore bump __FreeBSD_version. This change has no functional impact on nooptions VIMAGE kernel builds. Reviewed by: bz, brooks Approved by: julian (mentor)
2009-05-23 21:43:44 +00:00
for (ifc = LIST_FIRST(&V_if_cloners), buf = outbuf;
Fix a LOR where copyout was called while holding a lock. Reported by: rwatson
2004-09-15 04:41:56 +00:00
ifc != NULL && count != 0;
ifc = LIST_NEXT(ifc, ifc_list), count--, buf += IFNAMSIZ) {
strlcpy(buf, ifc->ifc_name, IFNAMSIZ);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
}
done:
IF_CLONERS_UNLOCK();
Fix a LOR where copyout was called while holding a lock. Reported by: rwatson
2004-09-15 04:41:56 +00:00
if (err == 0)
err = copyout(outbuf, dst, buf_count*IFNAMSIZ);
if (outbuf != NULL)
free(outbuf, M_CLONE);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
return (err);
}
/*
* A utility function to extract unit numbers from interface names of
* the form name###.
*
* Returns 0 on success and an error on failure.
*/
int
ifc_name2unit(const char *name, int *unit)
{
const char *cp;
Fix the following bugs: - In ifc_name2unit(), disallow leading zeroes in a unit. Exploit: ifconfig lo01 create - In ifc_name2unit(), properly handle overflows. Otherwise, either of two local panic()'s can occur, either because no interface with such a name could be found after it was successfully created, or because the code will bogusly assume that it's a wildcard (unit < 0 due to overflow). Exploit: ifconfig lo<overflowed_integer> create - Previous revision made the following sequence trigger a KASSERT() failure in queue(3): Exploit: ifconfig lo0 destroy; ifconfig lo0 destroy This is because IFC_IFLIST_REMOVE() is always called before ifc->ifc_destroy() has been run, not accounting for the fact that the latter can fail and leave the interface operating (like is the case for "lo0"). So we ended up calling LIST_REMOVE() twice. We cannot defer IFC_IFLIST_REMOVE() until after a call to ifc->ifc_destroy() because the ifnet may have been removed and its memory has been freed, so recover from this by re-inserting the ifnet in the cloned interfaces list if ifc->ifc_destroy() indicates a failure.
2005-11-24 18:56:14 +00:00
int cutoff = INT_MAX / 10;
int cutlim = INT_MAX % 10;
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
for (cp = name; *cp != '\0' && (*cp < '0' || *cp > '9'); cp++);
if (*cp == '\0') {
*unit = -1;
Fix the following bugs: - In ifc_name2unit(), disallow leading zeroes in a unit. Exploit: ifconfig lo01 create - In ifc_name2unit(), properly handle overflows. Otherwise, either of two local panic()'s can occur, either because no interface with such a name could be found after it was successfully created, or because the code will bogusly assume that it's a wildcard (unit < 0 due to overflow). Exploit: ifconfig lo<overflowed_integer> create - Previous revision made the following sequence trigger a KASSERT() failure in queue(3): Exploit: ifconfig lo0 destroy; ifconfig lo0 destroy This is because IFC_IFLIST_REMOVE() is always called before ifc->ifc_destroy() has been run, not accounting for the fact that the latter can fail and leave the interface operating (like is the case for "lo0"). So we ended up calling LIST_REMOVE() twice. We cannot defer IFC_IFLIST_REMOVE() until after a call to ifc->ifc_destroy() because the ifnet may have been removed and its memory has been freed, so recover from this by re-inserting the ifnet in the cloned interfaces list if ifc->ifc_destroy() indicates a failure.
2005-11-24 18:56:14 +00:00
} else if (cp[0] == '0' && cp[1] != '\0') {
/* Disallow leading zeroes. */
return (EINVAL);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
} else {
for (*unit = 0; *cp != '\0'; cp++) {
if (*cp < '0' || *cp > '9') {
/* Bogus unit number. */
return (EINVAL);
}
Fix the following bugs: - In ifc_name2unit(), disallow leading zeroes in a unit. Exploit: ifconfig lo01 create - In ifc_name2unit(), properly handle overflows. Otherwise, either of two local panic()'s can occur, either because no interface with such a name could be found after it was successfully created, or because the code will bogusly assume that it's a wildcard (unit < 0 due to overflow). Exploit: ifconfig lo<overflowed_integer> create - Previous revision made the following sequence trigger a KASSERT() failure in queue(3): Exploit: ifconfig lo0 destroy; ifconfig lo0 destroy This is because IFC_IFLIST_REMOVE() is always called before ifc->ifc_destroy() has been run, not accounting for the fact that the latter can fail and leave the interface operating (like is the case for "lo0"). So we ended up calling LIST_REMOVE() twice. We cannot defer IFC_IFLIST_REMOVE() until after a call to ifc->ifc_destroy() because the ifnet may have been removed and its memory has been freed, so recover from this by re-inserting the ifnet in the cloned interfaces list if ifc->ifc_destroy() indicates a failure.
2005-11-24 18:56:14 +00:00
if (*unit > cutoff ||
(*unit == cutoff && *cp - '0' > cutlim))
return (EINVAL);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
*unit = (*unit * 10) + (*cp - '0');
}
}
return (0);
}
int
ifc_alloc_unit(struct if_clone *ifc, int *unit)
{
int wildcard, bytoff, bitoff;
int err = 0;
IF_CLONE_LOCK(ifc);
bytoff = bitoff = 0;
wildcard = (*unit < 0);
/*
* Find a free unit if none was given.
*/
if (wildcard) {
while ((bytoff < ifc->ifc_bmlen)
&& (ifc->ifc_units[bytoff] == 0xff))
bytoff++;
if (bytoff >= ifc->ifc_bmlen) {
err = ENOSPC;
goto done;
}
while ((ifc->ifc_units[bytoff] & (1 << bitoff)) != 0)
bitoff++;
*unit = (bytoff << 3) + bitoff;
}
if (*unit > ifc->ifc_maxunit) {
err = ENOSPC;
goto done;
}
if (!wildcard) {
bytoff = *unit >> 3;
bitoff = *unit - (bytoff << 3);
}
if((ifc->ifc_units[bytoff] & (1 << bitoff)) != 0) {
err = EEXIST;
goto done;
}
/*
* Allocate the unit in the bitmap.
*/
Change the reference counting to count the number of cloned interfaces for each cloner. This ensures that ifc->ifc_units is not prematurely freed in if_clone_detach() before the clones are destroyed, resulting in memory modified after free. This could be triggered with if_vlan. Assert that all cloners have been destroyed when freeing the memory. Change all simple cloners to destroy their clones with ifc_simple_destroy() on module unload so the reference count is properly updated. This also cleans up the interface destroy routines and allows future optimisation. Discussed with: brooks, pjd, -current Reviewed by: brooks
2005-10-12 19:52:16 +00:00
KASSERT((ifc->ifc_units[bytoff] & (1 << bitoff)) == 0,
("%s: bit is already set", __func__));
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
ifc->ifc_units[bytoff] |= (1 << bitoff);
Change the reference counting to count the number of cloned interfaces for each cloner. This ensures that ifc->ifc_units is not prematurely freed in if_clone_detach() before the clones are destroyed, resulting in memory modified after free. This could be triggered with if_vlan. Assert that all cloners have been destroyed when freeing the memory. Change all simple cloners to destroy their clones with ifc_simple_destroy() on module unload so the reference count is properly updated. This also cleans up the interface destroy routines and allows future optimisation. Discussed with: brooks, pjd, -current Reviewed by: brooks
2005-10-12 19:52:16 +00:00
IF_CLONE_ADDREF_LOCKED(ifc);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
done:
IF_CLONE_UNLOCK(ifc);
return (err);
}
void
ifc_free_unit(struct if_clone *ifc, int unit)
{
int bytoff, bitoff;
/*
* Compute offset in the bitmap and deallocate the unit.
*/
bytoff = unit >> 3;
bitoff = unit - (bytoff << 3);
IF_CLONE_LOCK(ifc);
KASSERT((ifc->ifc_units[bytoff] & (1 << bitoff)) != 0,
("%s: bit is already cleared", __func__));
ifc->ifc_units[bytoff] &= ~(1 << bitoff);
Change the reference counting to count the number of cloned interfaces for each cloner. This ensures that ifc->ifc_units is not prematurely freed in if_clone_detach() before the clones are destroyed, resulting in memory modified after free. This could be triggered with if_vlan. Assert that all cloners have been destroyed when freeing the memory. Change all simple cloners to destroy their clones with ifc_simple_destroy() on module unload so the reference count is properly updated. This also cleans up the interface destroy routines and allows future optimisation. Discussed with: brooks, pjd, -current Reviewed by: brooks
2005-10-12 19:52:16 +00:00
IF_CLONE_REMREF_LOCKED(ifc); /* releases lock */
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
}
void
ifc_simple_attach(struct if_clone *ifc)
{
int err;
int unit;
char name[IFNAMSIZ];
struct ifc_simple_data *ifcs = ifc->ifc_data;
KASSERT(ifcs->ifcs_minifs - 1 <= ifc->ifc_maxunit,
Fix the following bugs: - In ifc_name2unit(), disallow leading zeroes in a unit. Exploit: ifconfig lo01 create - In ifc_name2unit(), properly handle overflows. Otherwise, either of two local panic()'s can occur, either because no interface with such a name could be found after it was successfully created, or because the code will bogusly assume that it's a wildcard (unit < 0 due to overflow). Exploit: ifconfig lo<overflowed_integer> create - Previous revision made the following sequence trigger a KASSERT() failure in queue(3): Exploit: ifconfig lo0 destroy; ifconfig lo0 destroy This is because IFC_IFLIST_REMOVE() is always called before ifc->ifc_destroy() has been run, not accounting for the fact that the latter can fail and leave the interface operating (like is the case for "lo0"). So we ended up calling LIST_REMOVE() twice. We cannot defer IFC_IFLIST_REMOVE() until after a call to ifc->ifc_destroy() because the ifnet may have been removed and its memory has been freed, so recover from this by re-inserting the ifnet in the cloned interfaces list if ifc->ifc_destroy() indicates a failure.
2005-11-24 18:56:14 +00:00
("%s: %s requested more units than allowed (%d > %d)",
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
__func__, ifc->ifc_name, ifcs->ifcs_minifs,
ifc->ifc_maxunit + 1));
for (unit = 0; unit < ifcs->ifcs_minifs; unit++) {
snprintf(name, IFNAMSIZ, "%s%d", ifc->ifc_name, unit);
Revise network interface cloning to take an optional opaque parameter that can specify configuration parameters: o rev cloner api's to add optional parameter block o add SIOCCREATE2 that accepts parameter data o rev vlan support to use new api (maintain old code) Reviewed by: arch@
2006-07-09 06:04:01 +00:00
err = if_clone_createif(ifc, name, IFNAMSIZ, NULL);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
KASSERT(err == 0,
("%s: failed to create required interface %s",
__func__, name));
}
}
int
ifc_simple_match(struct if_clone *ifc, const char *name)
{
const char *cp;
int i;
/* Match the name */
for (cp = name, i = 0; i < strlen(ifc->ifc_name); i++, cp++) {
if (ifc->ifc_name[i] != *cp)
return (0);
}
/* Make sure there's a unit number or nothing after the name */
for (; *cp != '\0'; cp++) {
if (*cp < '0' || *cp > '9')
return (0);
}
return (1);
}
int
Revise network interface cloning to take an optional opaque parameter that can specify configuration parameters: o rev cloner api's to add optional parameter block o add SIOCCREATE2 that accepts parameter data o rev vlan support to use new api (maintain old code) Reviewed by: arch@
2006-07-09 06:04:01 +00:00
ifc_simple_create(struct if_clone *ifc, char *name, size_t len, caddr_t params)
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
{
char *dp;
int wildcard;
int unit;
int err;
struct ifc_simple_data *ifcs = ifc->ifc_data;
err = ifc_name2unit(name, &unit);
if (err != 0)
return (err);
wildcard = (unit < 0);
err = ifc_alloc_unit(ifc, &unit);
if (err != 0)
return (err);
Revise network interface cloning to take an optional opaque parameter that can specify configuration parameters: o rev cloner api's to add optional parameter block o add SIOCCREATE2 that accepts parameter data o rev vlan support to use new api (maintain old code) Reviewed by: arch@
2006-07-09 06:04:01 +00:00
err = ifcs->ifcs_create(ifc, unit, params);
Major overhaul of pseudo-interface cloning. Highlights include: - Split the code out into if_clone.[ch]. - Locked struct if_clone. [1] - Add a per-cloner match function rather then simply matching names of the form <name><unit> and <name>. - Use the match function to allow creation of <interface>.<tag> vlan interfaces. The old way is preserved unchanged! - Also the match function to allow creation of stf(4) interfaces named stf0, stf, or 6to4. This is the only major user visible change in that "ifconfig stf" creates the interface stf rather then stf0 and does not print "stf0" to stdout. - Allow destroy functions to fail so they can refuse to delete interfaces. Currently, we forbid the deletion of interfaces which were created in the init function, particularly lo0, pflog0, and pfsync0. In the case of lo0 this was a panic implementation so it does not count as a user visiable change. :-) - Since most interfaces do not need the new functionality, an family of wrapper functions, ifc_simple_*(), were created to wrap old style cloner functions. - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE instead. Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1] Reviewed by: andre, mlaier Discussed on: net
2004-06-22 20:13:25 +00:00
if (err != 0) {
ifc_free_unit(ifc, unit);
return (err);
}
/* In the wildcard case, we need to update the name. */
if (wildcard) {
for (dp = name; *dp != '\0'; dp++);
if (snprintf(dp, len - (dp-name), "%d", unit) >
len - (dp-name) - 1) {
/*
* This can only be a programmer error and
* there's no straightforward way to recover if
* it happens.
*/
panic("if_clone_create(): interface name too long");
}
}
return (0);
}
int
ifc_simple_destroy(struct if_clone *ifc, struct ifnet *ifp)
{
int unit;
struct ifc_simple_data *ifcs = ifc->ifc_data;
unit = ifp->if_dunit;
if (unit < ifcs->ifcs_minifs)
return (EINVAL);
ifcs->ifcs_destroy(ifp);
ifc_free_unit(ifc, unit);
return (0);
}
Reference in New Issue Copy Permalink