d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
883949a124
freebsd-skq/sys/dev/cardbus/cardbus_cis.h

45 lines
1.7 KiB
C
Raw Normal View History

Start each of the license/copyright comments with /*-, minor shuffle of lines
2005-01-06 01:43:34 +00:00
/*-
Initial commit of NEWCARD cardbus side (that actually compiles and works) Files: dev/cardbus/cardbus.c dev/cardbus/cardbusreg.h dev/cardbus/cardbusvar.h dev/cardbus/cardbus_cis.c dev/cardbus/cardbus_cis.h dev/pccbb/pccbb.c dev/pccbb/pccbbreg.h dev/pccbb/pccbbvar.h dev/pccbb/pccbb_if.m This should support: - cardbus controllers: * TI 113X * TI 12XX * TI 14XX * Ricoh 47X * Ricoh 46X * ToPIC 95 * ToPIC 97 * ToPIC 100 * Cirrus Logic CLPD683x - cardbus cards * 3c575BT * 3c575CT * Xircom X3201 (includes IBM, Xircom and, Intel cards) [ 3com support already in kernel, Xircom will be committed real soon now] This doesn't work with 16bit pccards under NEWCARD. Enable in your config by having "device pccbb" and "device cardbus". (A "device pccard" will attach a pccard bus, but it means you system have a high chance of panicing when a 16bit card is inserted) It should be fairly simple to make a driver attach to cardbus under NEWCARD -- simply add an entry for attaching to cardbus on a new DRIVER_MODULE and add new device IDs as necessary. You should also make sure the card can be detached nicely without the interrupt routine doing something weird, like going into an infinite loop. Usually that should entail adding an additional check when a pci register or the bus space is read to check if it equals 0xffffffff. Any problems, please let me know. Reviewed by: imp
2000-10-18 03:25:13 +00:00
* Copyright (c) 2000,2001 Jonathan Chen.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
Use the standard FreeBSD license Approved by: imp, jon
2005-01-13 19:12:10 +00:00
* notice, this list of conditions and the following disclaimer.
Initial commit of NEWCARD cardbus side (that actually compiles and works) Files: dev/cardbus/cardbus.c dev/cardbus/cardbusreg.h dev/cardbus/cardbusvar.h dev/cardbus/cardbus_cis.c dev/cardbus/cardbus_cis.h dev/pccbb/pccbb.c dev/pccbb/pccbbreg.h dev/pccbb/pccbbvar.h dev/pccbb/pccbb_if.m This should support: - cardbus controllers: * TI 113X * TI 12XX * TI 14XX * Ricoh 47X * Ricoh 46X * ToPIC 95 * ToPIC 97 * ToPIC 100 * Cirrus Logic CLPD683x - cardbus cards * 3c575BT * 3c575CT * Xircom X3201 (includes IBM, Xircom and, Intel cards) [ 3com support already in kernel, Xircom will be committed real soon now] This doesn't work with 16bit pccards under NEWCARD. Enable in your config by having "device pccbb" and "device cardbus". (A "device pccard" will attach a pccard bus, but it means you system have a high chance of panicing when a 16bit card is inserted) It should be fairly simple to make a driver attach to cardbus under NEWCARD -- simply add an entry for attaching to cardbus on a new DRIVER_MODULE and add new device IDs as necessary. You should also make sure the card can be detached nicely without the interrupt routine doing something weird, like going into an infinite loop. Usually that should entail adding an additional check when a pci register or the bus space is read to check if it equals 0xffffffff. Any problems, please let me know. Reviewed by: imp
2000-10-18 03:25:13 +00:00
* 2. Redistributions in binary form must reproduce the above copyright
Use the standard FreeBSD license Approved by: imp, jon
2005-01-13 19:12:10 +00:00
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
Initial commit of NEWCARD cardbus side (that actually compiles and works) Files: dev/cardbus/cardbus.c dev/cardbus/cardbusreg.h dev/cardbus/cardbusvar.h dev/cardbus/cardbus_cis.c dev/cardbus/cardbus_cis.h dev/pccbb/pccbb.c dev/pccbb/pccbbreg.h dev/pccbb/pccbbvar.h dev/pccbb/pccbb_if.m This should support: - cardbus controllers: * TI 113X * TI 12XX * TI 14XX * Ricoh 47X * Ricoh 46X * ToPIC 95 * ToPIC 97 * ToPIC 100 * Cirrus Logic CLPD683x - cardbus cards * 3c575BT * 3c575CT * Xircom X3201 (includes IBM, Xircom and, Intel cards) [ 3com support already in kernel, Xircom will be committed real soon now] This doesn't work with 16bit pccards under NEWCARD. Enable in your config by having "device pccbb" and "device cardbus". (A "device pccard" will attach a pccard bus, but it means you system have a high chance of panicing when a 16bit card is inserted) It should be fairly simple to make a driver attach to cardbus under NEWCARD -- simply add an entry for attaching to cardbus on a new DRIVER_MODULE and add new device IDs as necessary. You should also make sure the card can be detached nicely without the interrupt routine doing something weird, like going into an infinite loop. Usually that should entail adding an additional check when a pci register or the bus space is read to check if it equals 0xffffffff. Any problems, please let me know. Reviewed by: imp
2000-10-18 03:25:13 +00:00
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
Use the standard FreeBSD license Approved by: imp, jon
2005-01-13 19:12:10 +00:00
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
Initial commit of NEWCARD cardbus side (that actually compiles and works) Files: dev/cardbus/cardbus.c dev/cardbus/cardbusreg.h dev/cardbus/cardbusvar.h dev/cardbus/cardbus_cis.c dev/cardbus/cardbus_cis.h dev/pccbb/pccbb.c dev/pccbb/pccbbreg.h dev/pccbb/pccbbvar.h dev/pccbb/pccbb_if.m This should support: - cardbus controllers: * TI 113X * TI 12XX * TI 14XX * Ricoh 47X * Ricoh 46X * ToPIC 95 * ToPIC 97 * ToPIC 100 * Cirrus Logic CLPD683x - cardbus cards * 3c575BT * 3c575CT * Xircom X3201 (includes IBM, Xircom and, Intel cards) [ 3com support already in kernel, Xircom will be committed real soon now] This doesn't work with 16bit pccards under NEWCARD. Enable in your config by having "device pccbb" and "device cardbus". (A "device pccard" will attach a pccard bus, but it means you system have a high chance of panicing when a 16bit card is inserted) It should be fairly simple to make a driver attach to cardbus under NEWCARD -- simply add an entry for attaching to cardbus on a new DRIVER_MODULE and add new device IDs as necessary. You should also make sure the card can be detached nicely without the interrupt routine doing something weird, like going into an infinite loop. Usually that should entail adding an additional check when a pci register or the bus space is read to check if it equals 0xffffffff. Any problems, please let me know. Reviewed by: imp
2000-10-18 03:25:13 +00:00
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Cardbus CIS definitions
*/
Move resource allocation routines from cardbus_cis.c to cardbus.c. They have nothing at all to do with CIS parsing. Remove some unused funce parsing: nothing used the results. Use more of pccard_cis.h's deifnitions for the cardbus specific cis parsing we do. More work is needed in this area. This reduces the size of the cardbus module by 380 bytes or so...
2005-02-06 21:03:13 +00:00
int cardbus_do_cis(device_t, device_t);
Initial commit of NEWCARD cardbus side (that actually compiles and works) Files: dev/cardbus/cardbus.c dev/cardbus/cardbusreg.h dev/cardbus/cardbusvar.h dev/cardbus/cardbus_cis.c dev/cardbus/cardbus_cis.h dev/pccbb/pccbb.c dev/pccbb/pccbbreg.h dev/pccbb/pccbbvar.h dev/pccbb/pccbb_if.m This should support: - cardbus controllers: * TI 113X * TI 12XX * TI 14XX * Ricoh 47X * Ricoh 46X * ToPIC 95 * ToPIC 97 * ToPIC 100 * Cirrus Logic CLPD683x - cardbus cards * 3c575BT * 3c575CT * Xircom X3201 (includes IBM, Xircom and, Intel cards) [ 3com support already in kernel, Xircom will be committed real soon now] This doesn't work with 16bit pccards under NEWCARD. Enable in your config by having "device pccbb" and "device cardbus". (A "device pccard" will attach a pccard bus, but it means you system have a high chance of panicing when a 16bit card is inserted) It should be fairly simple to make a driver attach to cardbus under NEWCARD -- simply add an entry for attaching to cardbus on a new DRIVER_MODULE and add new device IDs as necessary. You should also make sure the card can be detached nicely without the interrupt routine doing something weird, like going into an infinite loop. Usually that should entail adding an additional check when a pci register or the bus space is read to check if it equals 0xffffffff. Any problems, please let me know. Reviewed by: imp
2000-10-18 03:25:13 +00:00
* Better kld support in pccbb/cardbus - pccbb no longer needs to remember whether a card is inserted. - pccbb reissues insertion on load of cardbus/pccard modules. - got rid of unnecessary delays in power functions. - Cardbus children are no longer deleted if probe/attach fails. - non-attached child devices are reprobed at driver_added. * CARD interface to read CIS - added card_cis_read/card_cis_free interface to read arbitrary CIS data. This currently is only implemented in cardbus. * pccard begins to work - pccard can now use higher memory space (and uses it by default). - set_memory_offset interface changed. - fixed ccr access, which was broken at multiple locations. - implement an interrupt handler - pccard can now share interrupts. - resource alloc/release/activate/deactivate functions gutted: some resources are allocated by the bridge before the child device is probed or attached. Thus the resource "belongs" to the bridge, and the pccard_*_resource functions need to fudge the owner/rid. - changed some error conditions to panics to speed debugging. * Mutex fix - Giant is entered at the beginning of thread
2001-01-06 18:04:55 +00:00
struct cis_tupleinfo;
Non-functional changes to NEWCARD stuff. This is the first part of a two-part update to NEWCARD. Changes in this commit are non-functional, and includes the following: * indentation and other changes to meet style(9). * other minor style consistancy changes * addition of comments * renaming of device_t variables to be consistant across all of NEWCARD. (note that not all style violations are fixed in this commit -- those that aren't will be clobbered by the next commit.)
2001-08-26 23:55:34 +00:00
#define MAXTUPLESIZE 0x400
Initial commit of NEWCARD cardbus side (that actually compiles and works) Files: dev/cardbus/cardbus.c dev/cardbus/cardbusreg.h dev/cardbus/cardbusvar.h dev/cardbus/cardbus_cis.c dev/cardbus/cardbus_cis.h dev/pccbb/pccbb.c dev/pccbb/pccbbreg.h dev/pccbb/pccbbvar.h dev/pccbb/pccbb_if.m This should support: - cardbus controllers: * TI 113X * TI 12XX * TI 14XX * Ricoh 47X * Ricoh 46X * ToPIC 95 * ToPIC 97 * ToPIC 100 * Cirrus Logic CLPD683x - cardbus cards * 3c575BT * 3c575CT * Xircom X3201 (includes IBM, Xircom and, Intel cards) [ 3com support already in kernel, Xircom will be committed real soon now] This doesn't work with 16bit pccards under NEWCARD. Enable in your config by having "device pccbb" and "device cardbus". (A "device pccard" will attach a pccard bus, but it means you system have a high chance of panicing when a 16bit card is inserted) It should be fairly simple to make a driver attach to cardbus under NEWCARD -- simply add an entry for attaching to cardbus on a new DRIVER_MODULE and add new device IDs as necessary. You should also make sure the card can be detached nicely without the interrupt routine doing something weird, like going into an infinite loop. Usually that should entail adding an additional check when a pci register or the bus space is read to check if it equals 0xffffffff. Any problems, please let me know. Reviewed by: imp
2000-10-18 03:25:13 +00:00
/* BAR */
Non-functional changes to NEWCARD stuff. This is the first part of a two-part update to NEWCARD. Changes in this commit are non-functional, and includes the following: * indentation and other changes to meet style(9). * other minor style consistancy changes * addition of comments * renaming of device_t variables to be consistant across all of NEWCARD. (note that not all style violations are fixed in this commit -- those that aren't will be clobbered by the next commit.)
2001-08-26 23:55:34 +00:00
#define TPL_BAR_REG_ASI_MASK 0x07
#define TPL_BAR_REG_AS 0x10
Part two of this NEWCARD update: Briefly, the significant changes include: * Way better resource management in pccbb, pccard and cardbus. * pccard hot-removal now appears to work. * support pre-fetchable memory in cardbus. * update cardbus to support new pci bus interface functions. * Fix CIS reading to no longer use rman_get_virtual(). What's not there, but in the works: * pccard needs to do interrupt properly and not read the ISR on single function cards. * real resource management for pccard * a complete implementation of CIS parsing * need to look into how to correctly use mutex in pccbb
2001-08-27 00:09:42 +00:00
#define TPL_BAR_REG_PREFETCHABLE_ONLY 0x20
#define TPL_BAR_REG_PREFETCHABLE_CACHEABLE 0x40
#define TPL_BAR_REG_PREFETCHABLE 0x60
#define TPL_BAR_REG_BELOW1MB 0x80
Reference in New Issue Copy Permalink