Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*-
|
2017-11-27 15:23:17 +00:00
|
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
|
|
*
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
* Copyright (c) 2009 The FreeBSD Foundation
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* This software was developed by Rui Paulo under sponsorship from the
|
|
|
|
* FreeBSD Foundation.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*
|
|
|
|
* $FreeBSD$
|
|
|
|
*/
|
|
|
|
#ifndef _NET80211_IEEE80211_MESH_H_
|
|
|
|
#define _NET80211_IEEE80211_MESH_H_
|
|
|
|
|
|
|
|
#define IEEE80211_MESH_DEFAULT_TTL 31
|
2012-05-01 15:42:41 +00:00
|
|
|
#define IEEE80211_MESH_MAX_NEIGHBORS 15
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/*
|
2009-09-22 18:18:14 +00:00
|
|
|
* NB: all structures are __packed so sizeof works on arm, et. al.
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
|
|
|
/*
|
|
|
|
* 802.11s Information Elements.
|
|
|
|
*/
|
|
|
|
/* Mesh Configuration */
|
2012-02-13 07:47:36 +00:00
|
|
|
#define IEEE80211_MESH_CONF_SZ (7)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_meshconf_ie {
|
|
|
|
uint8_t conf_ie; /* IEEE80211_ELEMID_MESHCONF */
|
|
|
|
uint8_t conf_len;
|
2009-10-12 10:08:58 +00:00
|
|
|
uint8_t conf_pselid; /* Active Path Sel. Proto. ID */
|
|
|
|
uint8_t conf_pmetid; /* Active Metric Identifier */
|
|
|
|
uint8_t conf_ccid; /* Congestion Control Mode ID */
|
|
|
|
uint8_t conf_syncid; /* Sync. Protocol ID */
|
|
|
|
uint8_t conf_authid; /* Auth. Protocol ID */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint8_t conf_form; /* Formation Information */
|
2012-02-13 07:47:36 +00:00
|
|
|
uint8_t conf_cap;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/* Hybrid Wireless Mesh Protocol */
|
2012-02-13 07:47:36 +00:00
|
|
|
enum {
|
|
|
|
/* 0 reserved */
|
|
|
|
IEEE80211_MESHCONF_PATH_HWMP = 1,
|
|
|
|
/* 2-254 reserved */
|
|
|
|
IEEE80211_MESHCONF_PATH_VENDOR = 255,
|
|
|
|
};
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/* Airtime Link Metric */
|
2012-02-13 07:47:36 +00:00
|
|
|
enum {
|
|
|
|
/* 0 reserved */
|
|
|
|
IEEE80211_MESHCONF_METRIC_AIRTIME = 1,
|
|
|
|
/* 2-254 reserved */
|
|
|
|
IEEE80211_MESHCONF_METRIC_VENDOR = 255,
|
|
|
|
};
|
|
|
|
|
2009-10-12 10:08:58 +00:00
|
|
|
/* Congestion Control */
|
2012-02-13 07:47:36 +00:00
|
|
|
enum {
|
|
|
|
IEEE80211_MESHCONF_CC_DISABLED = 0,
|
|
|
|
IEEE80211_MESHCONF_CC_SIG = 1,
|
|
|
|
/* 2-254 reserved */
|
|
|
|
IEEE80211_MESHCONF_CC_VENDOR = 255,
|
|
|
|
};
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/* Neighbour Offset */
|
2012-02-13 07:47:36 +00:00
|
|
|
enum {
|
|
|
|
/* 0 reserved */
|
|
|
|
IEEE80211_MESHCONF_SYNC_NEIGHOFF = 1,
|
|
|
|
/* 2-254 rserved */
|
|
|
|
IEEE80211_MESHCONF_SYNC_VENDOR = 255,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Authentication Protocol Identifier */
|
|
|
|
enum {
|
|
|
|
|
|
|
|
IEEE80211_MESHCONF_AUTH_DISABLED = 0,
|
|
|
|
/* Simultaneous Authenticaction of Equals */
|
|
|
|
IEEE80211_MESHCONF_AUTH_SEA = 1,
|
|
|
|
IEEE80211_MESHCONF_AUTH_8021X = 2, /* IEEE 802.1X */
|
|
|
|
/* 3-254 reserved */
|
|
|
|
IEEE80211_MESHCONF_AUTH_VENDOR = 255,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Mesh Formation Info */
|
2012-05-01 16:14:18 +00:00
|
|
|
#define IEEE80211_MESHCONF_FORM_GATE 0x01 /* Connected to Gate */
|
2012-02-13 07:47:36 +00:00
|
|
|
#define IEEE80211_MESHCONF_FORM_NNEIGH_MASK 0x7E /* Number of Neighbours */
|
|
|
|
#define IEEE80211_MESHCONF_FORM_SA 0xF0 /* indicating 802.1X auth */
|
|
|
|
|
|
|
|
/* Mesh Capability */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#define IEEE80211_MESHCONF_CAP_AP 0x01 /* Accepting Peers */
|
|
|
|
#define IEEE80211_MESHCONF_CAP_MCCAS 0x02 /* MCCA supported */
|
|
|
|
#define IEEE80211_MESHCONF_CAP_MCCAE 0x04 /* MCCA enabled */
|
|
|
|
#define IEEE80211_MESHCONF_CAP_FWRD 0x08 /* forwarding enabled */
|
|
|
|
#define IEEE80211_MESHCONF_CAP_BTR 0x10 /* Beacon Timing Report Enab */
|
2012-02-13 07:47:36 +00:00
|
|
|
#define IEEE80211_MESHCONF_CAP_TBTT 0x20 /* TBTT Adjusting */
|
|
|
|
#define IEEE80211_MESHCONF_CAP_PSL 0x40 /* Power Save Level */
|
|
|
|
/* 0x80 reserved */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/* Mesh Identifier */
|
|
|
|
struct ieee80211_meshid_ie {
|
|
|
|
uint8_t id_ie; /* IEEE80211_ELEMID_MESHID */
|
|
|
|
uint8_t id_len;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/* Link Metric Report */
|
|
|
|
struct ieee80211_meshlmetric_ie {
|
2012-03-04 05:49:39 +00:00
|
|
|
uint8_t lm_ie; /* IEEE80211_ACTION_MESH_LMETRIC */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint8_t lm_len;
|
2012-03-04 05:49:39 +00:00
|
|
|
uint8_t lm_flags;
|
|
|
|
#define IEEE80211_MESH_LMETRIC_FLAGS_REQ 0x01 /* Request */
|
|
|
|
/*
|
|
|
|
* XXX: this field should be variable in size and depend on
|
|
|
|
* the active active path selection metric identifier
|
|
|
|
*/
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint32_t lm_metric;
|
|
|
|
#define IEEE80211_MESHLMETRIC_INITIALVAL 0
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/* Congestion Notification */
|
|
|
|
struct ieee80211_meshcngst_ie {
|
|
|
|
uint8_t cngst_ie; /* IEEE80211_ELEMID_MESHCNGST */
|
|
|
|
uint8_t cngst_len;
|
|
|
|
uint16_t cngst_timer[4]; /* Expiration Timers: AC_BK,
|
|
|
|
AC_BE, AC_VI, AC_VO */
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/* Peer Link Management */
|
2012-05-01 15:39:16 +00:00
|
|
|
#define IEEE80211_MPM_BASE_SZ (4)
|
|
|
|
#define IEEE80211_MPM_MAX_SZ (8)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_meshpeer_ie {
|
|
|
|
uint8_t peer_ie; /* IEEE80211_ELEMID_MESHPEER */
|
|
|
|
uint8_t peer_len;
|
2012-05-01 15:39:16 +00:00
|
|
|
uint16_t peer_proto; /* Peer Management Protocol */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint16_t peer_llinkid; /* Local Link ID */
|
|
|
|
uint16_t peer_linkid; /* Peer Link ID */
|
|
|
|
uint16_t peer_rcode;
|
|
|
|
} __packed;
|
|
|
|
|
2012-05-01 15:39:16 +00:00
|
|
|
/* Mesh Peering Protocol Identifier field value */
|
|
|
|
enum {
|
|
|
|
IEEE80211_MPPID_MPM = 0, /* Mesh peering management */
|
|
|
|
IEEE80211_MPPID_AUTH_MPM = 1, /* Auth. mesh peering exchange */
|
|
|
|
/* 2-65535 reserved */
|
|
|
|
};
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#ifdef notyet
|
|
|
|
/* Mesh Channel Switch Annoucement */
|
|
|
|
struct ieee80211_meshcsa_ie {
|
|
|
|
uint8_t csa_ie; /* IEEE80211_ELEMID_MESHCSA */
|
|
|
|
uint8_t csa_len;
|
|
|
|
uint8_t csa_mode;
|
|
|
|
uint8_t csa_newclass; /* New Regulatory Class */
|
|
|
|
uint8_t csa_newchan;
|
|
|
|
uint8_t csa_precvalue; /* Precedence Value */
|
|
|
|
uint8_t csa_count;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/* Mesh TIM */
|
|
|
|
/* Equal to the non Mesh version */
|
|
|
|
|
|
|
|
/* Mesh Awake Window */
|
|
|
|
struct ieee80211_meshawakew_ie {
|
|
|
|
uint8_t awakew_ie; /* IEEE80211_ELEMID_MESHAWAKEW */
|
|
|
|
uint8_t awakew_len;
|
|
|
|
uint8_t awakew_windowlen; /* in TUs */
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/* Mesh Beacon Timing */
|
|
|
|
struct ieee80211_meshbeacont_ie {
|
|
|
|
uint8_t beacont_ie; /* IEEE80211_ELEMID_MESHBEACONT */
|
|
|
|
uint8_t beacont_len;
|
|
|
|
struct {
|
|
|
|
uint8_t mp_aid; /* Least Octet of AID */
|
|
|
|
uint16_t mp_btime; /* Beacon Time */
|
|
|
|
uint16_t mp_bint; /* Beacon Interval */
|
|
|
|
} __packed mp[1]; /* NB: variable size */
|
|
|
|
} __packed;
|
|
|
|
#endif
|
|
|
|
|
2012-05-01 16:14:18 +00:00
|
|
|
/* Gate (GANN) Annoucement */
|
2013-02-07 21:20:28 +00:00
|
|
|
/*
|
|
|
|
* NB: these macros used for the length in the IEs does not include 2 bytes
|
|
|
|
* for _ie and _len fields as is defined by the standard.
|
|
|
|
*/
|
|
|
|
#define IEEE80211_MESHGANN_BASE_SZ (15)
|
2012-05-01 16:14:18 +00:00
|
|
|
struct ieee80211_meshgann_ie {
|
2013-02-07 21:20:28 +00:00
|
|
|
uint8_t gann_ie; /* IEEE80211_ELEMID_MESHGANN */
|
|
|
|
uint8_t gann_len;
|
|
|
|
uint8_t gann_flags;
|
|
|
|
uint8_t gann_hopcount;
|
|
|
|
uint8_t gann_ttl;
|
|
|
|
uint8_t gann_addr[IEEE80211_ADDR_LEN];
|
|
|
|
uint32_t gann_seq; /* GANN Sequence Number */
|
|
|
|
uint16_t gann_interval; /* GANN Interval */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/* Root (MP) Annoucement */
|
2012-03-06 21:20:16 +00:00
|
|
|
#define IEEE80211_MESHRANN_BASE_SZ (21)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_meshrann_ie {
|
|
|
|
uint8_t rann_ie; /* IEEE80211_ELEMID_MESHRANN */
|
|
|
|
uint8_t rann_len;
|
|
|
|
uint8_t rann_flags;
|
2012-05-01 16:14:18 +00:00
|
|
|
#define IEEE80211_MESHRANN_FLAGS_GATE 0x01 /* Mesh Gate */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint8_t rann_hopcount;
|
|
|
|
uint8_t rann_ttl;
|
|
|
|
uint8_t rann_addr[IEEE80211_ADDR_LEN];
|
|
|
|
uint32_t rann_seq; /* HWMP Sequence Number */
|
2012-03-06 21:20:16 +00:00
|
|
|
uint32_t rann_interval;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint32_t rann_metric;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/* Mesh Path Request */
|
2012-03-06 21:20:16 +00:00
|
|
|
#define IEEE80211_MESHPREQ_BASE_SZ (26)
|
|
|
|
#define IEEE80211_MESHPREQ_BASE_SZ_AE (32)
|
|
|
|
#define IEEE80211_MESHPREQ_TRGT_SZ (11)
|
|
|
|
#define IEEE80211_MESHPREQ_TCNT_OFFSET (27)
|
|
|
|
#define IEEE80211_MESHPREQ_TCNT_OFFSET_AE (33)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_meshpreq_ie {
|
|
|
|
uint8_t preq_ie; /* IEEE80211_ELEMID_MESHPREQ */
|
|
|
|
uint8_t preq_len;
|
|
|
|
uint8_t preq_flags;
|
2012-05-01 16:14:18 +00:00
|
|
|
#define IEEE80211_MESHPREQ_FLAGS_GATE 0x01 /* Mesh Gate */
|
2012-05-01 16:06:20 +00:00
|
|
|
#define IEEE80211_MESHPREQ_FLAGS_AM 0x02 /* 0 = bcast / 1 = ucast */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#define IEEE80211_MESHPREQ_FLAGS_PP 0x04 /* Proactive PREP */
|
|
|
|
#define IEEE80211_MESHPREQ_FLAGS_AE 0x40 /* Address Extension */
|
|
|
|
uint8_t preq_hopcount;
|
|
|
|
uint8_t preq_ttl;
|
|
|
|
uint32_t preq_id;
|
|
|
|
uint8_t preq_origaddr[IEEE80211_ADDR_LEN];
|
|
|
|
uint32_t preq_origseq; /* HWMP Sequence Number */
|
2012-03-06 21:20:16 +00:00
|
|
|
/* NB: may have Originator External Address */
|
|
|
|
uint8_t preq_orig_ext_addr[IEEE80211_ADDR_LEN];
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint32_t preq_lifetime;
|
|
|
|
uint32_t preq_metric;
|
|
|
|
uint8_t preq_tcount; /* target count */
|
|
|
|
struct {
|
|
|
|
uint8_t target_flags;
|
|
|
|
#define IEEE80211_MESHPREQ_TFLAGS_TO 0x01 /* Target Only */
|
|
|
|
#define IEEE80211_MESHPREQ_TFLAGS_USN 0x04 /* Unknown HWMP seq number */
|
|
|
|
uint8_t target_addr[IEEE80211_ADDR_LEN];
|
|
|
|
uint32_t target_seq; /* HWMP Sequence Number */
|
|
|
|
} __packed preq_targets[1]; /* NB: variable size */
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/* Mesh Path Reply */
|
2012-03-06 21:20:16 +00:00
|
|
|
#define IEEE80211_MESHPREP_BASE_SZ (31)
|
|
|
|
#define IEEE80211_MESHPREP_BASE_SZ_AE (37)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_meshprep_ie {
|
|
|
|
uint8_t prep_ie; /* IEEE80211_ELEMID_MESHPREP */
|
|
|
|
uint8_t prep_len;
|
|
|
|
uint8_t prep_flags;
|
2012-03-06 21:20:16 +00:00
|
|
|
#define IEEE80211_MESHPREP_FLAGS_AE 0x40 /* Address Extension */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint8_t prep_hopcount;
|
|
|
|
uint8_t prep_ttl;
|
|
|
|
uint8_t prep_targetaddr[IEEE80211_ADDR_LEN];
|
|
|
|
uint32_t prep_targetseq;
|
2012-03-06 21:20:16 +00:00
|
|
|
/* NB: May have Target External Address */
|
|
|
|
uint8_t prep_target_ext_addr[IEEE80211_ADDR_LEN];
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint32_t prep_lifetime;
|
|
|
|
uint32_t prep_metric;
|
|
|
|
uint8_t prep_origaddr[IEEE80211_ADDR_LEN];
|
|
|
|
uint32_t prep_origseq; /* HWMP Sequence Number */
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/* Mesh Path Error */
|
2012-03-06 21:20:16 +00:00
|
|
|
#define IEEE80211_MESHPERR_MAXDEST (19)
|
|
|
|
#define IEEE80211_MESHPERR_NDEST_OFFSET (3)
|
|
|
|
#define IEEE80211_MESHPERR_BASE_SZ (2)
|
|
|
|
#define IEEE80211_MESHPERR_DEST_SZ (13)
|
|
|
|
#define IEEE80211_MESHPERR_DEST_SZ_AE (19)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_meshperr_ie {
|
|
|
|
uint8_t perr_ie; /* IEEE80211_ELEMID_MESHPERR */
|
|
|
|
uint8_t perr_len;
|
2009-09-22 18:18:14 +00:00
|
|
|
uint8_t perr_ttl;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint8_t perr_ndests; /* Number of Destinations */
|
|
|
|
struct {
|
2009-09-22 18:18:14 +00:00
|
|
|
uint8_t dest_flags;
|
2012-03-06 21:20:16 +00:00
|
|
|
#define IEEE80211_MESHPERR_DFLAGS_USN 0x01 /* XXX: not part of standard */
|
|
|
|
#define IEEE80211_MESHPERR_DFLAGS_RC 0x02 /* XXX: not part of standard */
|
|
|
|
#define IEEE80211_MESHPERR_FLAGS_AE 0x40 /* Address Extension */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint8_t dest_addr[IEEE80211_ADDR_LEN];
|
|
|
|
uint32_t dest_seq; /* HWMP Sequence Number */
|
2012-03-06 21:20:16 +00:00
|
|
|
/* NB: May have Destination External Address */
|
|
|
|
uint8_t dest_ext_addr[IEEE80211_ADDR_LEN];
|
2009-09-22 18:18:14 +00:00
|
|
|
uint16_t dest_rcode;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
} __packed perr_dests[1]; /* NB: variable size */
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
#ifdef notyet
|
|
|
|
/* Mesh Proxy Update */
|
|
|
|
struct ieee80211_meshpu_ie {
|
|
|
|
uint8_t pu_ie; /* IEEE80211_ELEMID_MESHPU */
|
|
|
|
uint8_t pu_len;
|
|
|
|
uint8_t pu_flags;
|
|
|
|
#define IEEE80211_MESHPU_FLAGS_MASK 0x1
|
|
|
|
#define IEEE80211_MESHPU_FLAGS_DEL 0x0
|
|
|
|
#define IEEE80211_MESHPU_FLAGS_ADD 0x1
|
|
|
|
uint8_t pu_seq; /* PU Sequence Number */
|
|
|
|
uint8_t pu_addr[IEEE80211_ADDR_LEN];
|
|
|
|
uint8_t pu_naddr; /* Number of Proxied Addresses */
|
|
|
|
/* NB: proxied address follows */
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/* Mesh Proxy Update Confirmation */
|
|
|
|
struct ieee80211_meshpuc_ie {
|
|
|
|
uint8_t puc_ie; /* IEEE80211_ELEMID_MESHPUC */
|
|
|
|
uint8_t puc_len;
|
|
|
|
uint8_t puc_flags;
|
|
|
|
uint8_t puc_seq; /* PU Sequence Number */
|
|
|
|
uint8_t puc_daddr[IEEE80211_ADDR_LEN];
|
|
|
|
} __packed;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* 802.11s Action Frames
|
2012-05-01 15:35:10 +00:00
|
|
|
* XXX: these are wrong, and some of them should be
|
|
|
|
* under MESH category while PROXY is under MULTIHOP category.
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
|
|
|
#define IEEE80211_ACTION_CAT_INTERWORK 15
|
|
|
|
#define IEEE80211_ACTION_CAT_RESOURCE 16
|
|
|
|
#define IEEE80211_ACTION_CAT_PROXY 17
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Mesh Peering Action codes.
|
|
|
|
*/
|
|
|
|
enum {
|
2012-05-01 15:35:10 +00:00
|
|
|
/* 0 reserved */
|
|
|
|
IEEE80211_ACTION_MESHPEERING_OPEN = 1,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CONFIRM = 2,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE = 3,
|
|
|
|
/* 4-255 reserved */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
2012-03-04 05:49:39 +00:00
|
|
|
* Mesh Action code.
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
|
|
|
enum {
|
2012-03-04 05:49:39 +00:00
|
|
|
IEEE80211_ACTION_MESH_LMETRIC = 0, /* Mesh Link Metric Report */
|
|
|
|
IEEE80211_ACTION_MESH_HWMP = 1, /* HWMP Mesh Path Selection */
|
|
|
|
IEEE80211_ACTION_MESH_GANN = 2, /* Gate Announcement */
|
|
|
|
IEEE80211_ACTION_MESH_CC = 3, /* Congestion Control */
|
|
|
|
IEEE80211_ACTION_MESH_MCCA_SREQ = 4, /* MCCA Setup Request */
|
|
|
|
IEEE80211_ACTION_MESH_MCCA_SREP = 5, /* MCCA Setup Reply */
|
|
|
|
IEEE80211_ACTION_MESH_MCCA_AREQ = 6, /* MCCA Advertisement Req. */
|
|
|
|
IEEE80211_ACTION_MESH_MCCA_ADVER =7, /* MCCA Advertisement */
|
|
|
|
IEEE80211_ACTION_MESH_MCCA_TRDOWN = 8, /* MCCA Teardown */
|
|
|
|
IEEE80211_ACTION_MESH_TBTT_REQ = 9, /* TBTT Adjustment Request */
|
|
|
|
IEEE80211_ACTION_MESH_TBTT_RES = 10, /* TBTT Adjustment Response */
|
|
|
|
/* 11-255 reserved */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Different mesh control structures based on the AE
|
|
|
|
* (Address Extension) bits.
|
|
|
|
*/
|
|
|
|
struct ieee80211_meshcntl {
|
|
|
|
uint8_t mc_flags; /* Address Extension 00 */
|
|
|
|
uint8_t mc_ttl; /* TTL */
|
|
|
|
uint8_t mc_seq[4]; /* Sequence No. */
|
|
|
|
/* NB: more addresses may follow */
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct ieee80211_meshcntl_ae01 {
|
|
|
|
uint8_t mc_flags; /* Address Extension 01 */
|
|
|
|
uint8_t mc_ttl; /* TTL */
|
|
|
|
uint8_t mc_seq[4]; /* Sequence No. */
|
|
|
|
uint8_t mc_addr4[IEEE80211_ADDR_LEN];
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
struct ieee80211_meshcntl_ae10 {
|
|
|
|
uint8_t mc_flags; /* Address Extension 10 */
|
|
|
|
uint8_t mc_ttl; /* TTL */
|
|
|
|
uint8_t mc_seq[4]; /* Sequence No. */
|
|
|
|
uint8_t mc_addr5[IEEE80211_ADDR_LEN];
|
|
|
|
uint8_t mc_addr6[IEEE80211_ADDR_LEN];
|
|
|
|
} __packed;
|
|
|
|
|
2012-05-01 15:56:26 +00:00
|
|
|
#define IEEE80211_MESH_AE_MASK 0x03
|
|
|
|
enum {
|
|
|
|
IEEE80211_MESH_AE_00 = 0, /* MC has no AE subfield */
|
|
|
|
IEEE80211_MESH_AE_01 = 1, /* MC contain addr4 */
|
|
|
|
IEEE80211_MESH_AE_10 = 2, /* MC contain addr5 & addr6 */
|
|
|
|
IEEE80211_MESH_AE_11 = 3, /* RESERVED */
|
|
|
|
};
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#ifdef _KERNEL
|
2012-03-06 21:20:16 +00:00
|
|
|
MALLOC_DECLARE(M_80211_MESH_PREQ);
|
|
|
|
MALLOC_DECLARE(M_80211_MESH_PREP);
|
|
|
|
MALLOC_DECLARE(M_80211_MESH_PERR);
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
MALLOC_DECLARE(M_80211_MESH_RT);
|
2013-02-07 21:24:20 +00:00
|
|
|
MALLOC_DECLARE(M_80211_MESH_GT_RT);
|
2012-05-01 15:47:30 +00:00
|
|
|
/*
|
|
|
|
* Basic forwarding information:
|
|
|
|
* o Destination MAC
|
|
|
|
* o Next-hop MAC
|
|
|
|
* o Precursor list (not implemented yet)
|
|
|
|
* o Path timeout
|
|
|
|
* The rest is part of the active Mesh path selection protocol.
|
|
|
|
* XXX: to be moved out later.
|
|
|
|
*/
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_mesh_route {
|
|
|
|
TAILQ_ENTRY(ieee80211_mesh_route) rt_next;
|
2012-05-01 16:16:20 +00:00
|
|
|
struct ieee80211vap *rt_vap;
|
2015-05-26 04:25:11 +00:00
|
|
|
ieee80211_rte_lock_t rt_lock; /* fine grained route lock */
|
2012-05-01 16:16:20 +00:00
|
|
|
struct callout rt_discovery; /* discovery timeout */
|
2012-05-01 15:47:30 +00:00
|
|
|
int rt_updtime; /* last update time */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint8_t rt_dest[IEEE80211_ADDR_LEN];
|
2012-05-01 15:56:26 +00:00
|
|
|
uint8_t rt_mesh_gate[IEEE80211_ADDR_LEN]; /* meshDA */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint8_t rt_nexthop[IEEE80211_ADDR_LEN];
|
|
|
|
uint32_t rt_metric; /* path metric */
|
|
|
|
uint16_t rt_nhops; /* number of hops */
|
2009-07-20 19:12:08 +00:00
|
|
|
uint16_t rt_flags;
|
2012-05-01 16:16:20 +00:00
|
|
|
#define IEEE80211_MESHRT_FLAGS_DISCOVER 0x01 /* path discovery */
|
|
|
|
#define IEEE80211_MESHRT_FLAGS_VALID 0x02 /* path discovery complete */
|
|
|
|
#define IEEE80211_MESHRT_FLAGS_PROXY 0x04 /* proxy entry */
|
2013-02-07 21:20:28 +00:00
|
|
|
#define IEEE80211_MESHRT_FLAGS_GATE 0x08 /* mesh gate entry */
|
2012-05-01 15:47:30 +00:00
|
|
|
uint32_t rt_lifetime; /* route timeout */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint32_t rt_lastmseq; /* last seq# seen dest */
|
2012-05-01 15:56:26 +00:00
|
|
|
uint32_t rt_ext_seq; /* proxy seq number */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
void *rt_priv; /* private data */
|
|
|
|
};
|
|
|
|
#define IEEE80211_MESH_ROUTE_PRIV(rt, cast) ((cast *)rt->rt_priv)
|
|
|
|
|
2013-02-07 21:24:20 +00:00
|
|
|
/*
|
|
|
|
* Stored information about known mesh gates.
|
|
|
|
*/
|
|
|
|
struct ieee80211_mesh_gate_route {
|
|
|
|
TAILQ_ENTRY(ieee80211_mesh_gate_route) gr_next;
|
|
|
|
uint8_t gr_addr[IEEE80211_ADDR_LEN];
|
|
|
|
uint32_t gr_lastseq;
|
|
|
|
struct ieee80211_mesh_route *gr_route;
|
|
|
|
};
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#define IEEE80211_MESH_PROTO_DSZ 12 /* description size */
|
|
|
|
/*
|
|
|
|
* Mesh Path Selection Protocol.
|
|
|
|
*/
|
|
|
|
enum ieee80211_state;
|
|
|
|
struct ieee80211_mesh_proto_path {
|
2009-10-12 10:08:58 +00:00
|
|
|
uint8_t mpp_active;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
char mpp_descr[IEEE80211_MESH_PROTO_DSZ];
|
2009-10-12 10:08:58 +00:00
|
|
|
uint8_t mpp_ie;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_node *
|
|
|
|
(*mpp_discover)(struct ieee80211vap *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
struct mbuf *);
|
|
|
|
void (*mpp_peerdown)(struct ieee80211_node *);
|
2012-05-01 16:12:39 +00:00
|
|
|
void (*mpp_senderror)(struct ieee80211vap *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
|
|
struct ieee80211_mesh_route *, int);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
void (*mpp_vattach)(struct ieee80211vap *);
|
|
|
|
void (*mpp_vdetach)(struct ieee80211vap *);
|
|
|
|
int (*mpp_newstate)(struct ieee80211vap *,
|
|
|
|
enum ieee80211_state, int);
|
2009-07-20 19:12:08 +00:00
|
|
|
const size_t mpp_privlen; /* size required in the routing table
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
for private data */
|
2009-07-21 19:38:22 +00:00
|
|
|
int mpp_inact; /* inact. timeout for invalid routes
|
|
|
|
(ticks) */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Mesh Link Metric Report Protocol.
|
|
|
|
*/
|
|
|
|
struct ieee80211_mesh_proto_metric {
|
2009-10-12 10:08:58 +00:00
|
|
|
uint8_t mpm_active;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
char mpm_descr[IEEE80211_MESH_PROTO_DSZ];
|
2009-10-12 10:08:58 +00:00
|
|
|
uint8_t mpm_ie;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint32_t (*mpm_metric)(struct ieee80211_node *);
|
|
|
|
};
|
|
|
|
|
|
|
|
#ifdef notyet
|
|
|
|
/*
|
|
|
|
* Mesh Authentication Protocol.
|
|
|
|
*/
|
|
|
|
struct ieee80211_mesh_proto_auth {
|
|
|
|
uint8_t mpa_ie[4];
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ieee80211_mesh_proto_congestion {
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ieee80211_mesh_proto_sync {
|
|
|
|
};
|
|
|
|
#endif
|
|
|
|
|
|
|
|
typedef uint32_t ieee80211_mesh_seq;
|
|
|
|
#define IEEE80211_MESH_SEQ_LEQ(a, b) ((int32_t)((a)-(b)) <= 0)
|
|
|
|
#define IEEE80211_MESH_SEQ_GEQ(a, b) ((int32_t)((a)-(b)) >= 0)
|
|
|
|
|
|
|
|
struct ieee80211_mesh_state {
|
|
|
|
int ms_idlen;
|
|
|
|
uint8_t ms_id[IEEE80211_MESHID_LEN];
|
|
|
|
ieee80211_mesh_seq ms_seq; /* seq no for meshcntl */
|
|
|
|
uint16_t ms_neighbors;
|
|
|
|
uint8_t ms_ttl; /* mesh ttl set in packets */
|
|
|
|
#define IEEE80211_MESHFLAGS_AP 0x01 /* accept peers */
|
2012-05-01 16:14:18 +00:00
|
|
|
#define IEEE80211_MESHFLAGS_GATE 0x02 /* mesh gate role */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#define IEEE80211_MESHFLAGS_FWD 0x04 /* forward packets */
|
2013-02-07 21:23:43 +00:00
|
|
|
#define IEEE80211_MESHFLAGS_ROOT 0x08 /* configured as root */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint8_t ms_flags;
|
2015-05-26 04:25:11 +00:00
|
|
|
ieee80211_rt_lock_t ms_rt_lock;
|
2009-07-20 19:12:08 +00:00
|
|
|
struct callout ms_cleantimer;
|
2013-02-07 21:23:43 +00:00
|
|
|
struct callout ms_gatetimer;
|
|
|
|
ieee80211_mesh_seq ms_gateseq;
|
2013-02-07 21:24:20 +00:00
|
|
|
TAILQ_HEAD(, ieee80211_mesh_gate_route) ms_known_gates;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
TAILQ_HEAD(, ieee80211_mesh_route) ms_routes;
|
|
|
|
struct ieee80211_mesh_proto_metric *ms_pmetric;
|
|
|
|
struct ieee80211_mesh_proto_path *ms_ppath;
|
|
|
|
};
|
|
|
|
void ieee80211_mesh_attach(struct ieee80211com *);
|
|
|
|
void ieee80211_mesh_detach(struct ieee80211com *);
|
|
|
|
|
|
|
|
struct ieee80211_mesh_route *
|
|
|
|
ieee80211_mesh_rt_find(struct ieee80211vap *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN]);
|
|
|
|
struct ieee80211_mesh_route *
|
|
|
|
ieee80211_mesh_rt_add(struct ieee80211vap *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN]);
|
|
|
|
void ieee80211_mesh_rt_del(struct ieee80211vap *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN]);
|
|
|
|
void ieee80211_mesh_rt_flush(struct ieee80211vap *);
|
2009-07-27 14:22:09 +00:00
|
|
|
void ieee80211_mesh_rt_flush_peer(struct ieee80211vap *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN]);
|
2012-05-01 15:47:30 +00:00
|
|
|
int ieee80211_mesh_rt_update(struct ieee80211_mesh_route *rt, int);
|
2009-07-20 19:12:08 +00:00
|
|
|
void ieee80211_mesh_proxy_check(struct ieee80211vap *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN]);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
int ieee80211_mesh_register_proto_path(const
|
|
|
|
struct ieee80211_mesh_proto_path *);
|
|
|
|
int ieee80211_mesh_register_proto_metric(const
|
|
|
|
struct ieee80211_mesh_proto_metric *);
|
|
|
|
|
|
|
|
uint8_t * ieee80211_add_meshid(uint8_t *, struct ieee80211vap *);
|
|
|
|
uint8_t * ieee80211_add_meshconf(uint8_t *, struct ieee80211vap *);
|
|
|
|
uint8_t * ieee80211_add_meshpeer(uint8_t *, uint8_t, uint16_t, uint16_t,
|
|
|
|
uint16_t);
|
2012-03-04 05:49:39 +00:00
|
|
|
uint8_t * ieee80211_add_meshlmetric(uint8_t *, uint8_t, uint32_t);
|
2013-02-07 21:23:43 +00:00
|
|
|
uint8_t * ieee80211_add_meshgate(uint8_t *,
|
|
|
|
struct ieee80211_meshgann_ie *);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
void ieee80211_mesh_node_init(struct ieee80211vap *,
|
|
|
|
struct ieee80211_node *);
|
|
|
|
void ieee80211_mesh_node_cleanup(struct ieee80211_node *);
|
|
|
|
void ieee80211_parse_meshid(struct ieee80211_node *,
|
|
|
|
const uint8_t *);
|
|
|
|
struct ieee80211_scanparams;
|
|
|
|
void ieee80211_mesh_init_neighbor(struct ieee80211_node *,
|
|
|
|
const struct ieee80211_frame *,
|
|
|
|
const struct ieee80211_scanparams *);
|
2009-10-19 18:46:22 +00:00
|
|
|
void ieee80211_mesh_update_beacon(struct ieee80211vap *,
|
|
|
|
struct ieee80211_beacon_offsets *);
|
2013-02-07 21:24:52 +00:00
|
|
|
struct ieee80211_mesh_gate_route *
|
|
|
|
ieee80211_mesh_mark_gate(struct ieee80211vap *,
|
|
|
|
const uint8_t *, struct ieee80211_mesh_route *);
|
2013-02-07 21:25:32 +00:00
|
|
|
void ieee80211_mesh_forward_to_gates(struct ieee80211vap *,
|
|
|
|
struct ieee80211_mesh_route *);
|
2013-02-07 21:26:40 +00:00
|
|
|
struct ieee80211_node *
|
|
|
|
ieee80211_mesh_find_txnode(struct ieee80211vap *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN]);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2009-07-20 19:12:08 +00:00
|
|
|
/*
|
|
|
|
* Return non-zero if proxy operation is enabled.
|
|
|
|
*/
|
|
|
|
static __inline int
|
|
|
|
ieee80211_mesh_isproxyena(struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
return (ms->ms_flags &
|
2012-05-01 16:14:18 +00:00
|
|
|
(IEEE80211_MESHFLAGS_AP | IEEE80211_MESHFLAGS_GATE)) != 0;
|
2009-07-20 19:12:08 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Process an outbound frame: if a path is known to the
|
|
|
|
* destination then return a reference to the next hop
|
|
|
|
* for immediate transmission. Otherwise initiate path
|
|
|
|
* discovery and, if possible queue the packet to be
|
|
|
|
* sent when path discovery completes.
|
|
|
|
*/
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static __inline struct ieee80211_node *
|
2009-07-20 19:12:08 +00:00
|
|
|
ieee80211_mesh_discover(struct ieee80211vap *vap,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
const uint8_t dest[IEEE80211_ADDR_LEN], struct mbuf *m)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
return ms->ms_ppath->mpp_discover(vap, dest, m);
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* _KERNEL */
|
|
|
|
#endif /* !_NET80211_IEEE80211_MESH_H_ */
|