freebsd-skq/sys/dev/usb/if_uralreg.h

211 lines
6.0 KiB
C
Raw Normal View History

/* $FreeBSD$ */
/*-
* Copyright (c) 2005, 2006
* Damien Bergamini <damien.bergamini@free.fr>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
#define RAL_NOISE_FLOOR -95
#define RAL_RSSI_CORR 120
#define RAL_RX_DESC_SIZE (sizeof (struct ural_rx_desc))
#define RAL_TX_DESC_SIZE (sizeof (struct ural_tx_desc))
#define RAL_CONFIG_NO 1
#define RAL_IFACE_INDEX 0
#define RAL_VENDOR_REQUEST 0x01
#define RAL_WRITE_MAC 0x02
#define RAL_READ_MAC 0x03
#define RAL_WRITE_MULTI_MAC 0x06
#define RAL_READ_MULTI_MAC 0x07
#define RAL_READ_EEPROM 0x09
/*
* MAC registers.
*/
#define RAL_MAC_CSR0 0x0400 /* ASIC Version */
#define RAL_MAC_CSR1 0x0402 /* System control */
#define RAL_MAC_CSR2 0x0404 /* MAC addr0 */
#define RAL_MAC_CSR3 0x0406 /* MAC addr1 */
#define RAL_MAC_CSR4 0x0408 /* MAC addr2 */
#define RAL_MAC_CSR5 0x040a /* BSSID0 */
#define RAL_MAC_CSR6 0x040c /* BSSID1 */
#define RAL_MAC_CSR7 0x040e /* BSSID2 */
#define RAL_MAC_CSR8 0x0410 /* Max frame length */
#define RAL_MAC_CSR9 0x0412 /* Timer control */
#define RAL_MAC_CSR10 0x0414 /* Slot time */
#define RAL_MAC_CSR11 0x0416 /* IFS */
#define RAL_MAC_CSR12 0x0418 /* EIFS */
#define RAL_MAC_CSR13 0x041a /* Power mode0 */
#define RAL_MAC_CSR14 0x041c /* Power mode1 */
#define RAL_MAC_CSR15 0x041e /* Power saving transition0 */
#define RAL_MAC_CSR16 0x0420 /* Power saving transition1 */
#define RAL_MAC_CSR17 0x0422 /* Power state control */
#define RAL_MAC_CSR18 0x0424 /* Auto wake-up control */
#define RAL_MAC_CSR19 0x0426 /* GPIO control */
#define RAL_MAC_CSR20 0x0428 /* LED control0 */
#define RAL_MAC_CSR22 0x042c /* XXX not documented */
/*
* Tx/Rx Registers.
*/
#define RAL_TXRX_CSR0 0x0440 /* Security control */
#define RAL_TXRX_CSR2 0x0444 /* Rx control */
#define RAL_TXRX_CSR5 0x044a /* CCK Tx BBP ID0 */
#define RAL_TXRX_CSR6 0x044c /* CCK Tx BBP ID1 */
#define RAL_TXRX_CSR7 0x044e /* OFDM Tx BBP ID0 */
#define RAL_TXRX_CSR8 0x0450 /* OFDM Tx BBP ID1 */
#define RAL_TXRX_CSR10 0x0454 /* Auto responder control */
#define RAL_TXRX_CSR11 0x0456 /* Auto responder basic rate */
#define RAL_TXRX_CSR18 0x0464 /* Beacon interval */
#define RAL_TXRX_CSR19 0x0466 /* Beacon/sync control */
#define RAL_TXRX_CSR20 0x0468 /* Beacon alignment */
#define RAL_TXRX_CSR21 0x046a /* XXX not documented */
/*
* Security registers.
*/
#define RAL_SEC_CSR0 0x0480 /* Shared key 0, word 0 */
/*
* PHY registers.
*/
#define RAL_PHY_CSR2 0x04c4 /* Tx MAC configuration */
#define RAL_PHY_CSR4 0x04c8 /* Interface configuration */
#define RAL_PHY_CSR5 0x04ca /* BBP Pre-Tx CCK */
#define RAL_PHY_CSR6 0x04cc /* BBP Pre-Tx OFDM */
#define RAL_PHY_CSR7 0x04ce /* BBP serial control */
#define RAL_PHY_CSR8 0x04d0 /* BBP serial status */
#define RAL_PHY_CSR9 0x04d2 /* RF serial control0 */
#define RAL_PHY_CSR10 0x04d4 /* RF serial control1 */
/*
* Statistics registers.
*/
#define RAL_STA_CSR0 0x04e0 /* FCS error */
#define RAL_DISABLE_RX (1 << 0)
#define RAL_DROP_CRC (1 << 1)
#define RAL_DROP_PHY (1 << 2)
#define RAL_DROP_CTL (1 << 3)
#define RAL_DROP_NOT_TO_ME (1 << 4)
#define RAL_DROP_TODS (1 << 5)
#define RAL_DROP_BAD_VERSION (1 << 6)
#define RAL_DROP_MULTICAST (1 << 9)
#define RAL_DROP_BROADCAST (1 << 10)
#define RAL_SHORT_PREAMBLE (1 << 2)
#define RAL_RESET_ASIC (1 << 0)
#define RAL_RESET_BBP (1 << 1)
#define RAL_HOST_READY (1 << 2)
#define RAL_ENABLE_TSF (1 << 0)
#define RAL_ENABLE_TSF_SYNC(x) (((x) & 0x3) << 1)
#define RAL_ENABLE_TBCN (1 << 3)
#define RAL_ENABLE_BEACON_GENERATOR (1 << 4)
#define RAL_RF_AWAKE (3 << 7)
#define RAL_BBP_AWAKE (3 << 5)
#define RAL_BBP_WRITE (1 << 15)
#define RAL_BBP_BUSY (1 << 0)
#define RAL_RF1_AUTOTUNE 0x08000
#define RAL_RF3_AUTOTUNE 0x00040
#define RAL_RF_2522 0x00
#define RAL_RF_2523 0x01
#define RAL_RF_2524 0x02
#define RAL_RF_2525 0x03
#define RAL_RF_2525E 0x04
#define RAL_RF_2526 0x05
/* dual-band RF */
#define RAL_RF_5222 0x10
#define RAL_BBP_VERSION 0
#define RAL_BBP_TX 2
#define RAL_BBP_RX 14
#define RAL_BBP_ANTA 0x00
#define RAL_BBP_DIVERSITY 0x01
#define RAL_BBP_ANTB 0x02
#define RAL_BBP_ANTMASK 0x03
#define RAL_BBP_FLIPIQ 0x04
#define RAL_JAPAN_FILTER 0x08
struct ural_tx_desc {
uint32_t flags;
#define RAL_TX_RETRY(x) ((x) << 4)
#define RAL_TX_MORE_FRAG (1 << 8)
#define RAL_TX_ACK (1 << 9)
#define RAL_TX_TIMESTAMP (1 << 10)
#define RAL_TX_OFDM (1 << 11)
#define RAL_TX_NEWSEQ (1 << 12)
#define RAL_TX_IFS_MASK 0x00006000
#define RAL_TX_IFS_BACKOFF (0 << 13)
#define RAL_TX_IFS_SIFS (1 << 13)
#define RAL_TX_IFS_NEWBACKOFF (2 << 13)
#define RAL_TX_IFS_NONE (3 << 13)
uint16_t wme;
#define RAL_LOGCWMAX(x) (((x) & 0xf) << 12)
#define RAL_LOGCWMIN(x) (((x) & 0xf) << 8)
#define RAL_AIFSN(x) (((x) & 0x3) << 6)
#define RAL_IVOFFSET(x) (((x) & 0x3f))
uint16_t reserved1;
uint8_t plcp_signal;
uint8_t plcp_service;
#define RAL_PLCP_LENGEXT 0x80
uint8_t plcp_length_lo;
uint8_t plcp_length_hi;
uint32_t iv;
uint32_t eiv;
} __packed;
struct ural_rx_desc {
uint32_t flags;
#define RAL_RX_CRC_ERROR (1 << 5)
#define RAL_RX_OFDM (1 << 6)
#define RAL_RX_PHY_ERROR (1 << 7)
uint8_t rssi;
uint8_t rate;
uint16_t reserved;
uint32_t iv;
uint32_t eiv;
} __packed;
#define RAL_RF_LOBUSY (1 << 15)
#define RAL_RF_BUSY (1 << 31)
#define RAL_RF_20BIT (20 << 24)
#define RAL_RF1 0
#define RAL_RF2 2
#define RAL_RF3 1
#define RAL_RF4 3
#define RAL_EEPROM_ADDRESS 0x0004
#define RAL_EEPROM_TXPOWER 0x003c
#define RAL_EEPROM_CONFIG0 0x0016
#define RAL_EEPROM_BBP_BASE 0x001c