freebsd-skq/sys/pci/intpmreg.h

/*-
 * Copyright (c) 1998, 1999 Takanori Watanabe
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *        notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *        notice, this list of conditions and the following disclaimer in the
 *        documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.    IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $FreeBSD$
 */

#ifndef __INTPMREG_H__
#define	__INTPMREG_H__

/* Register definitions for non-ICH Intel Chipset SMBUS controllers. */

/* PCI Config Registers. */
#define	PCI_BASE_ADDR_SMB	0x90	/* IO BAR. */
#define	PCI_BASE_ADDR_PM	0x40
#define	PCI_HST_CFG_SMB		0xd2	/* Host Configuration */
#define	PCI_INTR_SMB_SMI	0
#define	PCI_INTR_SMB_IRQ9	8
#define	PCI_INTR_SMB_ENABLE	1
#define	PCI_SLV_CMD_SMB		0xd3 /*SLAVE COMMAND*/
#define	PCI_SLV_SDW_SMB_1	0xd4 /*SLAVE SHADOW PORT 1*/
#define	PCI_SLV_SDW_SMB_2	0xd5 /*SLAVE SHADOW PORT 2*/
#define	PCI_REVID_SMB		0xd6

/* PIXX4 SMBus Registers in the SMB BAR. */
#define	PIIX4_SMBHSTSTS		0x00
#define	PIIX4_SMBHSTSTAT_BUSY	(1<<0)
#define	PIIX4_SMBHSTSTAT_INTR	(1<<1)
#define	PIIX4_SMBHSTSTAT_ERR	(1<<2)
#define	PIIX4_SMBHSTSTAT_BUSC	(1<<3)
#define	PIIX4_SMBHSTSTAT_FAIL	(1<<4)
#define	PIIX4_SMBSLVSTS		0x01
#define	PIIX4_SMBSLVSTS_ALART	(1<<5)
#define	PIIX4_SMBSLVSTS_SDW2	(1<<4)
#define	PIIX4_SMBSLVSTS_SDW1	(1<<3)
#define	PIIX4_SMBSLVSTS_SLV	(1<<2)
#define	PIIX4_SMBSLVSTS_BUSY	(1<<0)
#define	PIIX4_SMBHSTCNT		0x02
#define	PIIX4_SMBHSTCNT_START	(1<<6)
#define	PIIX4_SMBHSTCNT_PROT_QUICK	0
#define	PIIX4_SMBHSTCNT_PROT_BYTE	(1<<2)
#define	PIIX4_SMBHSTCNT_PROT_BDATA	(2<<2)
#define	PIIX4_SMBHSTCNT_PROT_WDATA	(3<<2)
#define	PIIX4_SMBHSTCNT_PROT_BLOCK	(5<<2)
#define	PIIX4_SMBHSTCNT_KILL	(1<<1)
#define	PIIX4_SMBHSTCNT_INTREN	(1)
#define	PIIX4_SMBHSTCMD		0x03
#define	PIIX4_SMBHSTADD		0x04
#define	LSB			0x1
#define	PIIX4_SMBHSTDAT0	0x05
#define	PIIX4_SMBHSTDAT1	0x06
#define	PIIX4_SMBBLKDAT		0x07
#define	PIIX4_SMBSLVCNT		0x08
#define	PIIX4_SMBSLVCNT_ALTEN	(1<<3)
#define	PIIX4_SMBSLVCNT_SD2EN	(1<<2)
#define	PIIX4_SMBSLVCNT_SD1EN	(1<<1)
#define	PIIX4_SMBSLVCNT_SLVEN	(1)
#define	PIIX4_SMBSLVCMD		0x09
#define	PIIX4_SMBSLVEVT		0x0a
#define	PIIX4_SMBSLVDAT		0x0c

/* SMBus alert response address. */
#define	SMBALTRESP		0x18

#define	SMBBLOCKTRANS_MAX	32

#endif /* !__INTPMREG_H__ */
SMBus support for the Intel PIIX4 power management unit. See smbus(4), iicbus(4) and smb(4). User programs are available to retrieve SDRAM and sensor info, contact the author. Submitted by: Takanori Watanabe <takawata@shidahara1.planet.sci.kobe-u.ac.jp> Reviewed by: Mike Smith <msmith@freebsd.org> 1999-01-24 18:13:31 +00:00			`/*-`
			`* Copyright (c) 1998, 1999 Takanori Watanabe`
			`* All rights reserved.`
			`*`
			`* Redistribution and use in source and binary forms, with or without`
			`* modification, are permitted provided that the following conditions`
			`* are met:`
			`* 1. Redistributions of source code must retain the above copyright`
			`* notice, this list of conditions and the following disclaimer.`
			`* 2. Redistributions in binary form must reproduce the above copyright`
			`* notice, this list of conditions and the following disclaimer in the`
			`* documentation and/or other materials provided with the distribution.`
			`*`
			* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
			`* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE`
			`* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE`
			`* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE`
			`* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL`
			`* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS`
			`* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)`
			`* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT`
			`* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY`
			`* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF`
			`* SUCH DAMAGE.`
			`*`
$Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00			`* $FreeBSD$`
SMBus support for the Intel PIIX4 power management unit. See smbus(4), iicbus(4) and smb(4). User programs are available to retrieve SDRAM and sensor info, contact the author. Submitted by: Takanori Watanabe <takawata@shidahara1.planet.sci.kobe-u.ac.jp> Reviewed by: Mike Smith <msmith@freebsd.org> 1999-01-24 18:13:31 +00:00			`*/`

intpm(4) meet style(9). style(9) meet intpm(4). 2006-09-13 18:56:39 +00:00			`#ifndef __INTPMREG_H__`
			`#define __INTPMREG_H__`

			`/* Register definitions for non-ICH Intel Chipset SMBUS controllers. */`

			`/* PCI Config Registers. */`
			`#define PCI_BASE_ADDR_SMB 0x90 /* IO BAR. */`
			`#define PCI_BASE_ADDR_PM 0x40`
Various updates to most of the smbus(4) drivers: - Use printf() and device_printf() instead of log() in ichsmb(4). - Create the mutex sooner during ichsmb(4) attach. - Attach the interrupt handler later during ichsmb(4) attach to avoid races. - Don't try to set PCIM_CMD_PORTEN in ichsmb(4) attach as the PCI bus driver does this already. - Add locking to alpm(4), amdpm(4), amdsmb(4), intsmb(4), nfsmb(4), and viapm(4). - Axe ALPM_SMBIO_BASE_ADDR, it's not really safe to write arbitrary values into BARs, and the PCI bus layer will allocate resources now if needed. - Merge intpm(4) and intsmb(4) into just intsmb(4). Previously, intpm(4) attached to the PCI device and created an intsmb(4) child. Now, intsmb(4) just attaches to PCI directly. - Change several intsmb functions to take a softc instead of a device_t to make things simpler. 2007-01-11 19:56:24 +00:00			`#define PCI_HST_CFG_SMB 0xd2 /* Host Configuration */`
intpm(4) meet style(9). style(9) meet intpm(4). 2006-09-13 18:56:39 +00:00			`#define PCI_INTR_SMB_SMI 0`
			`#define PCI_INTR_SMB_IRQ9 8`
			`#define PCI_INTR_SMB_ENABLE 1`
			`#define PCI_SLV_CMD_SMB 0xd3 /SLAVE COMMAND/`
			`#define PCI_SLV_SDW_SMB_1 0xd4 /SLAVE SHADOW PORT 1/`
			`#define PCI_SLV_SDW_SMB_2 0xd5 /SLAVE SHADOW PORT 2/`
			`#define PCI_REVID_SMB 0xd6`

			`/* PIXX4 SMBus Registers in the SMB BAR. */`
			`#define PIIX4_SMBHSTSTS 0x00`
			`#define PIIX4_SMBHSTSTAT_BUSY (1<<0)`
			`#define PIIX4_SMBHSTSTAT_INTR (1<<1)`
			`#define PIIX4_SMBHSTSTAT_ERR (1<<2)`
			`#define PIIX4_SMBHSTSTAT_BUSC (1<<3)`
			`#define PIIX4_SMBHSTSTAT_FAIL (1<<4)`
			`#define PIIX4_SMBSLVSTS 0x01`
			`#define PIIX4_SMBSLVSTS_ALART (1<<5)`
			`#define PIIX4_SMBSLVSTS_SDW2 (1<<4)`
			`#define PIIX4_SMBSLVSTS_SDW1 (1<<3)`
			`#define PIIX4_SMBSLVSTS_SLV (1<<2)`
			`#define PIIX4_SMBSLVSTS_BUSY (1<<0)`
			`#define PIIX4_SMBHSTCNT 0x02`
			`#define PIIX4_SMBHSTCNT_START (1<<6)`
			`#define PIIX4_SMBHSTCNT_PROT_QUICK 0`
			`#define PIIX4_SMBHSTCNT_PROT_BYTE (1<<2)`
			`#define PIIX4_SMBHSTCNT_PROT_BDATA (2<<2)`
			`#define PIIX4_SMBHSTCNT_PROT_WDATA (3<<2)`
			`#define PIIX4_SMBHSTCNT_PROT_BLOCK (5<<2)`
			`#define PIIX4_SMBHSTCNT_KILL (1<<1)`
			`#define PIIX4_SMBHSTCNT_INTREN (1)`
			`#define PIIX4_SMBHSTCMD 0x03`
			`#define PIIX4_SMBHSTADD 0x04`
			`#define LSB 0x1`
			`#define PIIX4_SMBHSTDAT0 0x05`
			`#define PIIX4_SMBHSTDAT1 0x06`
			`#define PIIX4_SMBBLKDAT 0x07`
			`#define PIIX4_SMBSLVCNT 0x08`
			`#define PIIX4_SMBSLVCNT_ALTEN (1<<3)`
			`#define PIIX4_SMBSLVCNT_SD2EN (1<<2)`
			`#define PIIX4_SMBSLVCNT_SD1EN (1<<1)`
			`#define PIIX4_SMBSLVCNT_SLVEN (1)`
			`#define PIIX4_SMBSLVCMD 0x09`
			`#define PIIX4_SMBSLVEVT 0x0a`
			`#define PIIX4_SMBSLVDAT 0x0c`

			`/* SMBus alert response address. */`
			`#define SMBALTRESP 0x18`

			`#define SMBBLOCKTRANS_MAX 32`

			`#endif /* !__INTPMREG_H__ */`