freebsd-skq/sys/pci/if_wb.c

1887 lines
42 KiB
C
Raw Normal View History

/*
* Copyright (c) 1997, 1998
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
1999-08-28 01:08:13 +00:00
* $FreeBSD$
*/
/*
* Winbond fast ethernet PCI NIC driver
*
* Supports various cheap network adapters based on the Winbond W89C840F
* fast ethernet controller chip. This includes adapters manufactured by
* Winbond itself and some made by Linksys.
*
* Written by Bill Paul <wpaul@ctr.columbia.edu>
* Electrical Engineering Department
* Columbia University, New York City
*/
/*
* The Winbond W89C840F chip is a bus master; in some ways it resembles
* a DEC 'tulip' chip, only not as complicated. Unfortunately, it has
* one major difference which is that while the registers do many of
* the same things as a tulip adapter, the offsets are different: where
* tulip registers are typically spaced 8 bytes apart, the Winbond
* registers are spaced 4 bytes apart. The receiver filter is also
* programmed differently.
*
* Like the tulip, the Winbond chip uses small descriptors containing
* a status word, a control word and 32-bit areas that can either be used
* to point to two external data blocks, or to point to a single block
* and another descriptor in a linked list. Descriptors can be grouped
* together in blocks to form fixed length rings or can be chained
* together in linked lists. A single packet may be spread out over
* several descriptors if necessary.
*
* For the receive ring, this driver uses a linked list of descriptors,
* each pointing to a single mbuf cluster buffer, which us large enough
* to hold an entire packet. The link list is looped back to created a
* closed ring.
*
* For transmission, the driver creates a linked list of 'super descriptors'
* which each contain several individual descriptors linked toghether.
* Each 'super descriptor' contains WB_MAXFRAGS descriptors, which we
* abuse as fragment pointers. This allows us to use a buffer managment
* scheme very similar to that used in the ThunderLAN and Etherlink XL
* drivers.
*
* Autonegotiation is performed using the external PHY via the MII bus.
* The sample boards I have all use a Davicom PHY.
*
* Note: the author of the Linux driver for the Winbond chip alludes
* to some sort of flaw in the chip's design that seems to mandate some
* drastic workaround which signigicantly impairs transmit performance.
* I have no idea what he's on about: transmit performance with all
* three of my test boards seems fine.
*/
#include "opt_bdg.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/queue.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/bpf.h>
#include <vm/vm.h> /* for vtophys */
#include <vm/pmap.h> /* for vtophys */
#include <machine/clock.h> /* for DELAY */
#include <machine/bus_memio.h>
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
/* "controller miibus0" required. See GENERIC if you get errors here. */
#include "miibus_if.h"
#define WB_USEIOSPACE
#include <pci/if_wbreg.h>
MODULE_DEPEND(wb, miibus, 1, 1, 1);
#ifndef lint
1998-12-10 02:02:30 +00:00
static const char rcsid[] =
1999-08-28 01:08:13 +00:00
"$FreeBSD$";
#endif
/*
* Various supported device vendors/types and their names.
*/
static struct wb_type wb_devs[] = {
{ WB_VENDORID, WB_DEVICEID_840F,
"Winbond W89C840F 10/100BaseTX" },
{ CP_VENDORID, CP_DEVICEID_RL100,
"Compex RL100-ATX 10/100baseTX" },
{ 0, 0, NULL }
};
static int wb_probe __P((device_t));
static int wb_attach __P((device_t));
static int wb_detach __P((device_t));
static void wb_bfree __P((caddr_t, u_int));
static int wb_newbuf __P((struct wb_softc *,
struct wb_chain_onefrag *,
struct mbuf *));
static int wb_encap __P((struct wb_softc *, struct wb_chain *,
struct mbuf *));
static void wb_rxeof __P((struct wb_softc *));
static void wb_rxeoc __P((struct wb_softc *));
static void wb_txeof __P((struct wb_softc *));
static void wb_txeoc __P((struct wb_softc *));
static void wb_intr __P((void *));
static void wb_tick __P((void *));
static void wb_start __P((struct ifnet *));
static int wb_ioctl __P((struct ifnet *, u_long, caddr_t));
static void wb_init __P((void *));
static void wb_stop __P((struct wb_softc *));
static void wb_watchdog __P((struct ifnet *));
static void wb_shutdown __P((device_t));
static int wb_ifmedia_upd __P((struct ifnet *));
static void wb_ifmedia_sts __P((struct ifnet *, struct ifmediareq *));
static void wb_eeprom_putbyte __P((struct wb_softc *, int));
static void wb_eeprom_getword __P((struct wb_softc *, int, u_int16_t *));
static void wb_read_eeprom __P((struct wb_softc *, caddr_t, int,
int, int));
static void wb_mii_sync __P((struct wb_softc *));
static void wb_mii_send __P((struct wb_softc *, u_int32_t, int));
static int wb_mii_readreg __P((struct wb_softc *, struct wb_mii_frame *));
static int wb_mii_writereg __P((struct wb_softc *, struct wb_mii_frame *));
static void wb_setcfg __P((struct wb_softc *, u_int32_t));
static u_int8_t wb_calchash __P((caddr_t));
static void wb_setmulti __P((struct wb_softc *));
static void wb_reset __P((struct wb_softc *));
static void wb_fixmedia __P((struct wb_softc *));
static int wb_list_rx_init __P((struct wb_softc *));
static int wb_list_tx_init __P((struct wb_softc *));
static int wb_miibus_readreg __P((device_t, int, int));
static int wb_miibus_writereg __P((device_t, int, int, int));
static void wb_miibus_statchg __P((device_t));
#ifdef WB_USEIOSPACE
#define WB_RES SYS_RES_IOPORT
#define WB_RID WB_PCI_LOIO
#else
#define WB_RES SYS_RES_MEMORY
#define WB_RID WB_PCI_LOMEM
#endif
static device_method_t wb_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, wb_probe),
DEVMETHOD(device_attach, wb_attach),
DEVMETHOD(device_detach, wb_detach),
DEVMETHOD(device_shutdown, wb_shutdown),
/* bus interface, for miibus */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
/* MII interface */
DEVMETHOD(miibus_readreg, wb_miibus_readreg),
DEVMETHOD(miibus_writereg, wb_miibus_writereg),
DEVMETHOD(miibus_statchg, wb_miibus_statchg),
{ 0, 0 }
};
static driver_t wb_driver = {
"wb",
wb_methods,
sizeof(struct wb_softc)
};
static devclass_t wb_devclass;
DRIVER_MODULE(if_wb, pci, wb_driver, wb_devclass, 0, 0);
Un-do the changes to the DRIVER_MODULE() declarations in these drivers. This whole idea isn't going to work until somebody makes the bus/kld code smarter. The idea here is to change the module's internal name from "foo" to "if_foo" so that ifconfig can tell a network driver from a non-network one. However doing this doesn't work correctly no matter how you slice it. For everything to work, you have to change the name in both the driver_t struct and the DRIVER_MODULE() declaration. The problems are: - If you change the name in both places, then the kernel thinks that the device's name is now "if_foo", so you get things like: if_foo0: <FOO ethernet> irq foo at device foo on pcifoo if_foo0: Ethernet address: foo:foo:foo:foo:foo:foo This is bogus. Now the device name doesn't agree with the logical interface name. There's no reason for this, and it violates the principle of least astonishment. - If you leave the name in the driver_t struct as "foo" and only change the names in the DRIVER_MODULE() declaration to "if_foo" then attaching drivers to child devices doesn't work because the names don't agree. This breaks miibus: drivers that need to have miibuses and PHY drivers attached never get them. In other words: damned if you do, damned if you don't. This needs to be thought through some more. Since the drivers that use miibus are broken, I have to change these all back in order to make them work again. Yes this will stop ifconfig from being able to demand load driver modules. On the whole, I'd rather have that than having the drivers not work at all.
1999-09-20 19:06:45 +00:00
DRIVER_MODULE(miibus, wb, miibus_driver, miibus_devclass, 0, 0);
#define WB_SETBIT(sc, reg, x) \
CSR_WRITE_4(sc, reg, \
CSR_READ_4(sc, reg) | x)
#define WB_CLRBIT(sc, reg, x) \
CSR_WRITE_4(sc, reg, \
CSR_READ_4(sc, reg) & ~x)
#define SIO_SET(x) \
CSR_WRITE_4(sc, WB_SIO, \
CSR_READ_4(sc, WB_SIO) | x)
#define SIO_CLR(x) \
CSR_WRITE_4(sc, WB_SIO, \
CSR_READ_4(sc, WB_SIO) & ~x)
/*
* Send a read command and address to the EEPROM, check for ACK.
*/
static void wb_eeprom_putbyte(sc, addr)
struct wb_softc *sc;
int addr;
{
register int d, i;
d = addr | WB_EECMD_READ;
/*
* Feed in each bit and stobe the clock.
*/
for (i = 0x400; i; i >>= 1) {
if (d & i) {
SIO_SET(WB_SIO_EE_DATAIN);
} else {
SIO_CLR(WB_SIO_EE_DATAIN);
}
DELAY(100);
SIO_SET(WB_SIO_EE_CLK);
DELAY(150);
SIO_CLR(WB_SIO_EE_CLK);
DELAY(100);
}
return;
}
/*
* Read a word of data stored in the EEPROM at address 'addr.'
*/
static void wb_eeprom_getword(sc, addr, dest)
struct wb_softc *sc;
int addr;
u_int16_t *dest;
{
register int i;
u_int16_t word = 0;
/* Enter EEPROM access mode. */
CSR_WRITE_4(sc, WB_SIO, WB_SIO_EESEL|WB_SIO_EE_CS);
/*
* Send address of word we want to read.
*/
wb_eeprom_putbyte(sc, addr);
CSR_WRITE_4(sc, WB_SIO, WB_SIO_EESEL|WB_SIO_EE_CS);
/*
* Start reading bits from EEPROM.
*/
for (i = 0x8000; i; i >>= 1) {
SIO_SET(WB_SIO_EE_CLK);
DELAY(100);
if (CSR_READ_4(sc, WB_SIO) & WB_SIO_EE_DATAOUT)
word |= i;
SIO_CLR(WB_SIO_EE_CLK);
DELAY(100);
}
/* Turn off EEPROM access mode. */
CSR_WRITE_4(sc, WB_SIO, 0);
*dest = word;
return;
}
/*
* Read a sequence of words from the EEPROM.
*/
static void wb_read_eeprom(sc, dest, off, cnt, swap)
struct wb_softc *sc;
caddr_t dest;
int off;
int cnt;
int swap;
{
int i;
u_int16_t word = 0, *ptr;
for (i = 0; i < cnt; i++) {
wb_eeprom_getword(sc, off + i, &word);
ptr = (u_int16_t *)(dest + (i * 2));
if (swap)
*ptr = ntohs(word);
else
*ptr = word;
}
return;
}
/*
* Sync the PHYs by setting data bit and strobing the clock 32 times.
*/
static void wb_mii_sync(sc)
struct wb_softc *sc;
{
register int i;
SIO_SET(WB_SIO_MII_DIR|WB_SIO_MII_DATAIN);
for (i = 0; i < 32; i++) {
SIO_SET(WB_SIO_MII_CLK);
DELAY(1);
SIO_CLR(WB_SIO_MII_CLK);
DELAY(1);
}
return;
}
/*
* Clock a series of bits through the MII.
*/
static void wb_mii_send(sc, bits, cnt)
struct wb_softc *sc;
u_int32_t bits;
int cnt;
{
int i;
SIO_CLR(WB_SIO_MII_CLK);
for (i = (0x1 << (cnt - 1)); i; i >>= 1) {
if (bits & i) {
SIO_SET(WB_SIO_MII_DATAIN);
} else {
SIO_CLR(WB_SIO_MII_DATAIN);
}
DELAY(1);
SIO_CLR(WB_SIO_MII_CLK);
DELAY(1);
SIO_SET(WB_SIO_MII_CLK);
}
}
/*
* Read an PHY register through the MII.
*/
static int wb_mii_readreg(sc, frame)
struct wb_softc *sc;
struct wb_mii_frame *frame;
{
int i, ack, s;
s = splimp();
/*
* Set up frame for RX.
*/
frame->mii_stdelim = WB_MII_STARTDELIM;
frame->mii_opcode = WB_MII_READOP;
frame->mii_turnaround = 0;
frame->mii_data = 0;
CSR_WRITE_4(sc, WB_SIO, 0);
/*
* Turn on data xmit.
*/
SIO_SET(WB_SIO_MII_DIR);
wb_mii_sync(sc);
/*
* Send command/address info.
*/
wb_mii_send(sc, frame->mii_stdelim, 2);
wb_mii_send(sc, frame->mii_opcode, 2);
wb_mii_send(sc, frame->mii_phyaddr, 5);
wb_mii_send(sc, frame->mii_regaddr, 5);
/* Idle bit */
SIO_CLR((WB_SIO_MII_CLK|WB_SIO_MII_DATAIN));
DELAY(1);
SIO_SET(WB_SIO_MII_CLK);
DELAY(1);
/* Turn off xmit. */
SIO_CLR(WB_SIO_MII_DIR);
/* Check for ack */
SIO_CLR(WB_SIO_MII_CLK);
DELAY(1);
SIO_SET(WB_SIO_MII_CLK);
DELAY(1);
ack = CSR_READ_4(sc, WB_SIO) & WB_SIO_MII_DATAOUT;
SIO_CLR(WB_SIO_MII_CLK);
DELAY(1);
SIO_SET(WB_SIO_MII_CLK);
DELAY(1);
/*
* Now try reading data bits. If the ack failed, we still
* need to clock through 16 cycles to keep the PHY(s) in sync.
*/
if (ack) {
for(i = 0; i < 16; i++) {
SIO_CLR(WB_SIO_MII_CLK);
DELAY(1);
SIO_SET(WB_SIO_MII_CLK);
DELAY(1);
}
goto fail;
}
for (i = 0x8000; i; i >>= 1) {
SIO_CLR(WB_SIO_MII_CLK);
DELAY(1);
if (!ack) {
if (CSR_READ_4(sc, WB_SIO) & WB_SIO_MII_DATAOUT)
frame->mii_data |= i;
DELAY(1);
}
SIO_SET(WB_SIO_MII_CLK);
DELAY(1);
}
fail:
SIO_CLR(WB_SIO_MII_CLK);
DELAY(1);
SIO_SET(WB_SIO_MII_CLK);
DELAY(1);
splx(s);
if (ack)
return(1);
return(0);
}
/*
* Write to a PHY register through the MII.
*/
static int wb_mii_writereg(sc, frame)
struct wb_softc *sc;
struct wb_mii_frame *frame;
{
int s;
s = splimp();
/*
* Set up frame for TX.
*/
frame->mii_stdelim = WB_MII_STARTDELIM;
frame->mii_opcode = WB_MII_WRITEOP;
frame->mii_turnaround = WB_MII_TURNAROUND;
/*
* Turn on data output.
*/
SIO_SET(WB_SIO_MII_DIR);
wb_mii_sync(sc);
wb_mii_send(sc, frame->mii_stdelim, 2);
wb_mii_send(sc, frame->mii_opcode, 2);
wb_mii_send(sc, frame->mii_phyaddr, 5);
wb_mii_send(sc, frame->mii_regaddr, 5);
wb_mii_send(sc, frame->mii_turnaround, 2);
wb_mii_send(sc, frame->mii_data, 16);
/* Idle bit. */
SIO_SET(WB_SIO_MII_CLK);
DELAY(1);
SIO_CLR(WB_SIO_MII_CLK);
DELAY(1);
/*
* Turn off xmit.
*/
SIO_CLR(WB_SIO_MII_DIR);
splx(s);
return(0);
}
static int wb_miibus_readreg(dev, phy, reg)
device_t dev;
int phy, reg;
{
struct wb_softc *sc;
struct wb_mii_frame frame;
sc = device_get_softc(dev);
bzero((char *)&frame, sizeof(frame));
frame.mii_phyaddr = phy;
frame.mii_regaddr = reg;
wb_mii_readreg(sc, &frame);
return(frame.mii_data);
}
static int wb_miibus_writereg(dev, phy, reg, data)
device_t dev;
int phy, reg, data;
{
struct wb_softc *sc;
struct wb_mii_frame frame;
sc = device_get_softc(dev);
bzero((char *)&frame, sizeof(frame));
frame.mii_phyaddr = phy;
frame.mii_regaddr = reg;
frame.mii_data = data;
wb_mii_writereg(sc, &frame);
return(0);
}
static void wb_miibus_statchg(dev)
device_t dev;
{
struct wb_softc *sc;
struct mii_data *mii;
sc = device_get_softc(dev);
mii = device_get_softc(sc->wb_miibus);
wb_setcfg(sc, mii->mii_media_active);
return;
}
static u_int8_t wb_calchash(addr)
caddr_t addr;
{
u_int32_t crc, carry;
int i, j;
u_int8_t c;
/* Compute CRC for the address value. */
crc = 0xFFFFFFFF; /* initial value */
for (i = 0; i < 6; i++) {
c = *(addr + i);
for (j = 0; j < 8; j++) {
carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01);
crc <<= 1;
c >>= 1;
if (carry)
crc = (crc ^ 0x04c11db6) | carry;
}
}
/*
* return the filter bit position
* Note: I arrived at the following nonsense
* through experimentation. It's not the usual way to
* generate the bit position but it's the only thing
* I could come up with that works.
*/
return(~(crc >> 26) & 0x0000003F);
}
/*
* Program the 64-bit multicast hash filter.
*/
static void wb_setmulti(sc)
struct wb_softc *sc;
{
struct ifnet *ifp;
int h = 0;
u_int32_t hashes[2] = { 0, 0 };
struct ifmultiaddr *ifma;
u_int32_t rxfilt;
int mcnt = 0;
ifp = &sc->arpcom.ac_if;
rxfilt = CSR_READ_4(sc, WB_NETCFG);
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
rxfilt |= WB_NETCFG_RX_MULTI;
CSR_WRITE_4(sc, WB_NETCFG, rxfilt);
CSR_WRITE_4(sc, WB_MAR0, 0xFFFFFFFF);
CSR_WRITE_4(sc, WB_MAR1, 0xFFFFFFFF);
return;
}
/* first, zot all the existing hash bits */
CSR_WRITE_4(sc, WB_MAR0, 0);
CSR_WRITE_4(sc, WB_MAR1, 0);
/* now program new ones */
for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL;
ifma = ifma->ifma_link.le_next) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
h = wb_calchash(LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
if (h < 32)
hashes[0] |= (1 << h);
else
hashes[1] |= (1 << (h - 32));
mcnt++;
}
if (mcnt)
rxfilt |= WB_NETCFG_RX_MULTI;
else
rxfilt &= ~WB_NETCFG_RX_MULTI;
CSR_WRITE_4(sc, WB_MAR0, hashes[0]);
CSR_WRITE_4(sc, WB_MAR1, hashes[1]);
CSR_WRITE_4(sc, WB_NETCFG, rxfilt);
return;
}
/*
* The Winbond manual states that in order to fiddle with the
* 'full-duplex' and '100Mbps' bits in the netconfig register, we
* first have to put the transmit and/or receive logic in the idle state.
*/
static void wb_setcfg(sc, media)
struct wb_softc *sc;
u_int32_t media;
{
int i, restart = 0;
if (CSR_READ_4(sc, WB_NETCFG) & (WB_NETCFG_TX_ON|WB_NETCFG_RX_ON)) {
restart = 1;
WB_CLRBIT(sc, WB_NETCFG, (WB_NETCFG_TX_ON|WB_NETCFG_RX_ON));
for (i = 0; i < WB_TIMEOUT; i++) {
DELAY(10);
if ((CSR_READ_4(sc, WB_ISR) & WB_ISR_TX_IDLE) &&
(CSR_READ_4(sc, WB_ISR) & WB_ISR_RX_IDLE))
break;
}
if (i == WB_TIMEOUT)
printf("wb%d: failed to force tx and "
"rx to idle state\n", sc->wb_unit);
}
if (IFM_SUBTYPE(media) == IFM_10_T)
WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_100MBPS);
else
WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_100MBPS);
if ((media & IFM_GMASK) == IFM_FDX)
WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_FULLDUPLEX);
else
WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_FULLDUPLEX);
if (restart)
WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON|WB_NETCFG_RX_ON);
return;
}
static void wb_reset(sc)
struct wb_softc *sc;
{
register int i;
struct mii_data *mii;
CSR_WRITE_4(sc, WB_NETCFG, 0);
CSR_WRITE_4(sc, WB_BUSCTL, 0);
CSR_WRITE_4(sc, WB_TXADDR, 0);
CSR_WRITE_4(sc, WB_RXADDR, 0);
WB_SETBIT(sc, WB_BUSCTL, WB_BUSCTL_RESET);
WB_SETBIT(sc, WB_BUSCTL, WB_BUSCTL_RESET);
for (i = 0; i < WB_TIMEOUT; i++) {
DELAY(10);
if (!(CSR_READ_4(sc, WB_BUSCTL) & WB_BUSCTL_RESET))
break;
}
if (i == WB_TIMEOUT)
printf("wb%d: reset never completed!\n", sc->wb_unit);
/* Wait a little while for the chip to get its brains in order. */
DELAY(1000);
if (sc->wb_miibus == NULL)
return;
mii = device_get_softc(sc->wb_miibus);
if (mii == NULL)
return;
if (mii->mii_instance) {
struct mii_softc *miisc;
for (miisc = LIST_FIRST(&mii->mii_phys); miisc != NULL;
miisc = LIST_NEXT(miisc, mii_list))
mii_phy_reset(miisc);
}
return;
}
static void wb_fixmedia(sc)
struct wb_softc *sc;
{
struct mii_data *mii = NULL;
struct ifnet *ifp;
u_int32_t media;
if (sc->wb_miibus == NULL)
return;
mii = device_get_softc(sc->wb_miibus);
ifp = &sc->arpcom.ac_if;
mii_pollstat(mii);
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_10_T) {
media = mii->mii_media_active & ~IFM_10_T;
media |= IFM_100_TX;
} else if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX) {
media = mii->mii_media_active & ~IFM_100_TX;
media |= IFM_10_T;
} else
return;
ifmedia_set(&mii->mii_media, media);
return;
}
/*
* Probe for a Winbond chip. Check the PCI vendor and device
* IDs against our list and return a device name if we find a match.
*/
static int wb_probe(dev)
device_t dev;
{
struct wb_type *t;
t = wb_devs;
while(t->wb_name != NULL) {
if ((pci_get_vendor(dev) == t->wb_vid) &&
(pci_get_device(dev) == t->wb_did)) {
device_set_desc(dev, t->wb_name);
return(0);
}
t++;
}
return(ENXIO);
}
/*
* Attach the interface. Allocate softc structures, do ifmedia
* setup and ethernet/BPF attach.
*/
static int wb_attach(dev)
device_t dev;
{
int s;
u_char eaddr[ETHER_ADDR_LEN];
u_int32_t command;
struct wb_softc *sc;
struct ifnet *ifp;
int unit, error = 0, rid;
s = splimp();
sc = device_get_softc(dev);
unit = device_get_unit(dev);
/*
* Handle power management nonsense.
*/
command = pci_read_config(dev, WB_PCI_CAPID, 4) & 0x000000FF;
if (command == 0x01) {
command = pci_read_config(dev, WB_PCI_PWRMGMTCTRL, 4);
if (command & WB_PSTATE_MASK) {
u_int32_t iobase, membase, irq;
/* Save important PCI config data. */
iobase = pci_read_config(dev, WB_PCI_LOIO, 4);
membase = pci_read_config(dev, WB_PCI_LOMEM, 4);
irq = pci_read_config(dev, WB_PCI_INTLINE, 4);
/* Reset the power state. */
printf("wb%d: chip is in D%d power mode "
"-- setting to D0\n", unit, command & WB_PSTATE_MASK);
command &= 0xFFFFFFFC;
pci_write_config(dev, WB_PCI_PWRMGMTCTRL, command, 4);
/* Restore PCI config data. */
pci_write_config(dev, WB_PCI_LOIO, iobase, 4);
pci_write_config(dev, WB_PCI_LOMEM, membase, 4);
pci_write_config(dev, WB_PCI_INTLINE, irq, 4);
}
}
/*
* Map control/status registers.
*/
command = pci_read_config(dev, PCIR_COMMAND, 4);
command |= (PCIM_CMD_PORTEN|PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN);
pci_write_config(dev, PCIR_COMMAND, command, 4);
command = pci_read_config(dev, PCIR_COMMAND, 4);
#ifdef WB_USEIOSPACE
if (!(command & PCIM_CMD_PORTEN)) {
printf("wb%d: failed to enable I/O ports!\n", unit);
error = ENXIO;
goto fail;
}
#else
if (!(command & PCIM_CMD_MEMEN)) {
printf("wb%d: failed to enable memory mapping!\n", unit);
error = ENXIO;
goto fail;
}
#endif
rid = WB_RID;
sc->wb_res = bus_alloc_resource(dev, WB_RES, &rid,
0, ~0, 1, RF_ACTIVE);
if (sc->wb_res == NULL) {
printf("wb%d: couldn't map ports/memory\n", unit);
error = ENXIO;
goto fail;
}
sc->wb_btag = rman_get_bustag(sc->wb_res);
sc->wb_bhandle = rman_get_bushandle(sc->wb_res);
/* Allocate interrupt */
rid = 0;
sc->wb_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
RF_SHAREABLE | RF_ACTIVE);
if (sc->wb_irq == NULL) {
printf("wb%d: couldn't map interrupt\n", unit);
bus_release_resource(dev, WB_RES, WB_RID, sc->wb_res);
error = ENXIO;
goto fail;
}
error = bus_setup_intr(dev, sc->wb_irq, INTR_TYPE_NET,
wb_intr, sc, &sc->wb_intrhand);
if (error) {
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->wb_irq);
bus_release_resource(dev, WB_RES, WB_RID, sc->wb_res);
printf("wb%d: couldn't set up irq\n", unit);
goto fail;
}
/* Save the cache line size. */
sc->wb_cachesize = pci_read_config(dev, WB_PCI_CACHELEN, 4) & 0xFF;
/* Reset the adapter. */
wb_reset(sc);
/*
* Get station address from the EEPROM.
*/
wb_read_eeprom(sc, (caddr_t)&eaddr, 0, 3, 0);
/*
* A Winbond chip was detected. Inform the world.
*/
printf("wb%d: Ethernet address: %6D\n", unit, eaddr, ":");
sc->wb_unit = unit;
bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
sc->wb_ldata = contigmalloc(sizeof(struct wb_list_data) + 8, M_DEVBUF,
M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
if (sc->wb_ldata == NULL) {
printf("wb%d: no memory for list buffers!\n", unit);
bus_teardown_intr(dev, sc->wb_irq, sc->wb_intrhand);
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->wb_irq);
bus_release_resource(dev, WB_RES, WB_RID, sc->wb_res);
error = ENXIO;
goto fail;
}
bzero(sc->wb_ldata, sizeof(struct wb_list_data));
ifp = &sc->arpcom.ac_if;
ifp->if_softc = sc;
ifp->if_unit = unit;
ifp->if_name = "wb";
ifp->if_mtu = ETHERMTU;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = wb_ioctl;
ifp->if_output = ether_output;
ifp->if_start = wb_start;
ifp->if_watchdog = wb_watchdog;
ifp->if_init = wb_init;
ifp->if_baudrate = 10000000;
ifp->if_snd.ifq_maxlen = WB_TX_LIST_CNT - 1;
/*
* Do MII setup.
*/
if (mii_phy_probe(dev, &sc->wb_miibus,
wb_ifmedia_upd, wb_ifmedia_sts)) {
bus_teardown_intr(dev, sc->wb_irq, sc->wb_intrhand);
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->wb_irq);
bus_release_resource(dev, WB_RES, WB_RID, sc->wb_res);
free(sc->wb_ldata_ptr, M_DEVBUF);
error = ENXIO;
goto fail;
}
/*
* Call MI attach routine.
*/
ether_ifattach(ifp, ETHER_BPF_SUPPORTED);
fail:
if (error)
device_delete_child(dev, sc->wb_miibus);
splx(s);
return(error);
}
static int wb_detach(dev)
device_t dev;
{
struct wb_softc *sc;
struct ifnet *ifp;
int s;
s = splimp();
sc = device_get_softc(dev);
ifp = &sc->arpcom.ac_if;
wb_stop(sc);
ether_ifdetach(ifp, ETHER_BPF_SUPPORTED);
/* Delete any miibus and phy devices attached to this interface */
bus_generic_detach(dev);
device_delete_child(dev, sc->wb_miibus);
bus_teardown_intr(dev, sc->wb_irq, sc->wb_intrhand);
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->wb_irq);
bus_release_resource(dev, WB_RES, WB_RID, sc->wb_res);
free(sc->wb_ldata_ptr, M_DEVBUF);
splx(s);
return(0);
}
/*
* Initialize the transmit descriptors.
*/
static int wb_list_tx_init(sc)
struct wb_softc *sc;
{
struct wb_chain_data *cd;
struct wb_list_data *ld;
int i;
cd = &sc->wb_cdata;
ld = sc->wb_ldata;
for (i = 0; i < WB_TX_LIST_CNT; i++) {
cd->wb_tx_chain[i].wb_ptr = &ld->wb_tx_list[i];
if (i == (WB_TX_LIST_CNT - 1)) {
cd->wb_tx_chain[i].wb_nextdesc =
&cd->wb_tx_chain[0];
} else {
cd->wb_tx_chain[i].wb_nextdesc =
&cd->wb_tx_chain[i + 1];
}
}
cd->wb_tx_free = &cd->wb_tx_chain[0];
cd->wb_tx_tail = cd->wb_tx_head = NULL;
return(0);
}
/*
* Initialize the RX descriptors and allocate mbufs for them. Note that
* we arrange the descriptors in a closed ring, so that the last descriptor
* points back to the first.
*/
static int wb_list_rx_init(sc)
struct wb_softc *sc;
{
struct wb_chain_data *cd;
struct wb_list_data *ld;
int i;
cd = &sc->wb_cdata;
ld = sc->wb_ldata;
for (i = 0; i < WB_RX_LIST_CNT; i++) {
cd->wb_rx_chain[i].wb_ptr =
(struct wb_desc *)&ld->wb_rx_list[i];
cd->wb_rx_chain[i].wb_buf = (void *)&ld->wb_rxbufs[i];
if (wb_newbuf(sc, &cd->wb_rx_chain[i], NULL) == ENOBUFS)
return(ENOBUFS);
if (i == (WB_RX_LIST_CNT - 1)) {
cd->wb_rx_chain[i].wb_nextdesc = &cd->wb_rx_chain[0];
ld->wb_rx_list[i].wb_next =
vtophys(&ld->wb_rx_list[0]);
} else {
cd->wb_rx_chain[i].wb_nextdesc =
&cd->wb_rx_chain[i + 1];
ld->wb_rx_list[i].wb_next =
vtophys(&ld->wb_rx_list[i + 1]);
}
}
cd->wb_rx_head = &cd->wb_rx_chain[0];
return(0);
}
static void wb_bfree(buf, size)
caddr_t buf;
u_int size;
{
return;
}
/*
* Initialize an RX descriptor and attach an MBUF cluster.
*/
static int wb_newbuf(sc, c, m)
struct wb_softc *sc;
struct wb_chain_onefrag *c;
struct mbuf *m;
{
struct mbuf *m_new = NULL;
if (m == NULL) {
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
if (m_new == NULL) {
printf("wb%d: no memory for rx "
"list -- packet dropped!\n", sc->wb_unit);
return(ENOBUFS);
}
m_new->m_data = m_new->m_ext.ext_buf = c->wb_buf;
m_new->m_flags |= M_EXT;
m_new->m_ext.ext_size = m_new->m_pkthdr.len =
m_new->m_len = WB_BUFBYTES;
m_new->m_ext.ext_free = wb_bfree;
m_new->m_ext.ext_ref = wb_bfree;
} else {
m_new = m;
m_new->m_len = m_new->m_pkthdr.len = WB_BUFBYTES;
m_new->m_data = m_new->m_ext.ext_buf;
}
m_adj(m_new, sizeof(u_int64_t));
c->wb_mbuf = m_new;
c->wb_ptr->wb_data = vtophys(mtod(m_new, caddr_t));
c->wb_ptr->wb_ctl = WB_RXCTL_RLINK | 1536;
c->wb_ptr->wb_status = WB_RXSTAT;
return(0);
}
/*
* A frame has been uploaded: pass the resulting mbuf chain up to
* the higher level protocols.
*/
static void wb_rxeof(sc)
struct wb_softc *sc;
{
struct ether_header *eh;
struct mbuf *m = NULL;
struct ifnet *ifp;
struct wb_chain_onefrag *cur_rx;
int total_len = 0;
u_int32_t rxstat;
ifp = &sc->arpcom.ac_if;
while(!((rxstat = sc->wb_cdata.wb_rx_head->wb_ptr->wb_status) &
WB_RXSTAT_OWN)) {
struct mbuf *m0 = NULL;
cur_rx = sc->wb_cdata.wb_rx_head;
sc->wb_cdata.wb_rx_head = cur_rx->wb_nextdesc;
m = cur_rx->wb_mbuf;
if ((rxstat & WB_RXSTAT_MIIERR) ||
(WB_RXBYTES(cur_rx->wb_ptr->wb_status) < WB_MIN_FRAMELEN) ||
(WB_RXBYTES(cur_rx->wb_ptr->wb_status) > 1536) ||
!(rxstat & WB_RXSTAT_LASTFRAG) ||
!(rxstat & WB_RXSTAT_RXCMP)) {
ifp->if_ierrors++;
wb_newbuf(sc, cur_rx, m);
printf("wb%x: receiver babbling: possible chip "
"bug, forcing reset\n", sc->wb_unit);
wb_fixmedia(sc);
wb_reset(sc);
wb_init(sc);
return;
}
if (rxstat & WB_RXSTAT_RXERR) {
ifp->if_ierrors++;
wb_newbuf(sc, cur_rx, m);
break;
}
/* No errors; receive the packet. */
total_len = WB_RXBYTES(cur_rx->wb_ptr->wb_status);
/*
* XXX The Winbond chip includes the CRC with every
* received frame, and there's no way to turn this
* behavior off (at least, I can't find anything in
* the manual that explains how to do it) so we have
* to trim off the CRC manually.
*/
total_len -= ETHER_CRC_LEN;
m0 = m_devget(mtod(m, char *) - ETHER_ALIGN,
total_len + ETHER_ALIGN, 0, ifp, NULL);
wb_newbuf(sc, cur_rx, m);
if (m0 == NULL) {
ifp->if_ierrors++;
break;
}
m_adj(m0, ETHER_ALIGN);
m = m0;
ifp->if_ipackets++;
eh = mtod(m, struct ether_header *);
/* Remove header from mbuf and pass it on. */
m_adj(m, sizeof(struct ether_header));
ether_input(ifp, eh, m);
}
}
void wb_rxeoc(sc)
struct wb_softc *sc;
{
wb_rxeof(sc);
WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_RX_ON);
CSR_WRITE_4(sc, WB_RXADDR, vtophys(&sc->wb_ldata->wb_rx_list[0]));
WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_RX_ON);
if (CSR_READ_4(sc, WB_ISR) & WB_RXSTATE_SUSPEND)
CSR_WRITE_4(sc, WB_RXSTART, 0xFFFFFFFF);
return;
}
/*
* A frame was downloaded to the chip. It's safe for us to clean up
* the list buffers.
*/
static void wb_txeof(sc)
struct wb_softc *sc;
{
struct wb_chain *cur_tx;
struct ifnet *ifp;
ifp = &sc->arpcom.ac_if;
/* Clear the timeout timer. */
ifp->if_timer = 0;
if (sc->wb_cdata.wb_tx_head == NULL)
return;
/*
* Go through our tx list and free mbufs for those
* frames that have been transmitted.
*/
while(sc->wb_cdata.wb_tx_head->wb_mbuf != NULL) {
u_int32_t txstat;
cur_tx = sc->wb_cdata.wb_tx_head;
txstat = WB_TXSTATUS(cur_tx);
if ((txstat & WB_TXSTAT_OWN) || txstat == WB_UNSENT)
break;
if (txstat & WB_TXSTAT_TXERR) {
ifp->if_oerrors++;
if (txstat & WB_TXSTAT_ABORT)
ifp->if_collisions++;
if (txstat & WB_TXSTAT_LATECOLL)
ifp->if_collisions++;
}
ifp->if_collisions += (txstat & WB_TXSTAT_COLLCNT) >> 3;
ifp->if_opackets++;
m_freem(cur_tx->wb_mbuf);
cur_tx->wb_mbuf = NULL;
if (sc->wb_cdata.wb_tx_head == sc->wb_cdata.wb_tx_tail) {
sc->wb_cdata.wb_tx_head = NULL;
sc->wb_cdata.wb_tx_tail = NULL;
break;
}
sc->wb_cdata.wb_tx_head = cur_tx->wb_nextdesc;
}
return;
}
/*
* TX 'end of channel' interrupt handler.
*/
static void wb_txeoc(sc)
struct wb_softc *sc;
{
struct ifnet *ifp;
ifp = &sc->arpcom.ac_if;
ifp->if_timer = 0;
if (sc->wb_cdata.wb_tx_head == NULL) {
ifp->if_flags &= ~IFF_OACTIVE;
sc->wb_cdata.wb_tx_tail = NULL;
} else {
if (WB_TXOWN(sc->wb_cdata.wb_tx_head) == WB_UNSENT) {
WB_TXOWN(sc->wb_cdata.wb_tx_head) = WB_TXSTAT_OWN;
ifp->if_timer = 5;
CSR_WRITE_4(sc, WB_TXSTART, 0xFFFFFFFF);
}
}
return;
}
static void wb_intr(arg)
void *arg;
{
struct wb_softc *sc;
struct ifnet *ifp;
u_int32_t status;
sc = arg;
ifp = &sc->arpcom.ac_if;
if (!(ifp->if_flags & IFF_UP))
return;
/* Disable interrupts. */
CSR_WRITE_4(sc, WB_IMR, 0x00000000);
for (;;) {
status = CSR_READ_4(sc, WB_ISR);
if (status)
CSR_WRITE_4(sc, WB_ISR, status);
if ((status & WB_INTRS) == 0)
break;
if ((status & WB_ISR_RX_NOBUF) || (status & WB_ISR_RX_ERR)) {
ifp->if_ierrors++;
wb_reset(sc);
if (status & WB_ISR_RX_ERR)
wb_fixmedia(sc);
wb_init(sc);
continue;
}
if (status & WB_ISR_RX_OK)
wb_rxeof(sc);
if (status & WB_ISR_RX_IDLE)
wb_rxeoc(sc);
if (status & WB_ISR_TX_OK)
wb_txeof(sc);
if (status & WB_ISR_TX_NOBUF)
wb_txeoc(sc);
if (status & WB_ISR_TX_IDLE) {
wb_txeof(sc);
if (sc->wb_cdata.wb_tx_head != NULL) {
WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON);
CSR_WRITE_4(sc, WB_TXSTART, 0xFFFFFFFF);
}
}
if (status & WB_ISR_TX_UNDERRUN) {
ifp->if_oerrors++;
wb_txeof(sc);
WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON);
/* Jack up TX threshold */
sc->wb_txthresh += WB_TXTHRESH_CHUNK;
WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_THRESH);
WB_SETBIT(sc, WB_NETCFG, WB_TXTHRESH(sc->wb_txthresh));
WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON);
}
if (status & WB_ISR_BUS_ERR) {
wb_reset(sc);
wb_init(sc);
}
}
/* Re-enable interrupts. */
CSR_WRITE_4(sc, WB_IMR, WB_INTRS);
if (ifp->if_snd.ifq_head != NULL) {
wb_start(ifp);
}
return;
}
static void wb_tick(xsc)
void *xsc;
{
struct wb_softc *sc;
struct mii_data *mii;
1999-08-31 05:30:13 +00:00
int s;
s = splimp();
sc = xsc;
mii = device_get_softc(sc->wb_miibus);
mii_tick(mii);
sc->wb_stat_ch = timeout(wb_tick, sc, hz);
1999-08-31 05:30:13 +00:00
splx(s);
return;
}
/*
* Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
* pointers to the fragment pointers.
*/
static int wb_encap(sc, c, m_head)
struct wb_softc *sc;
struct wb_chain *c;
struct mbuf *m_head;
{
int frag = 0;
struct wb_desc *f = NULL;
int total_len;
struct mbuf *m;
/*
* Start packing the mbufs in this chain into
* the fragment pointers. Stop when we run out
* of fragments or hit the end of the mbuf chain.
*/
m = m_head;
total_len = 0;
for (m = m_head, frag = 0; m != NULL; m = m->m_next) {
if (m->m_len != 0) {
if (frag == WB_MAXFRAGS)
break;
total_len += m->m_len;
f = &c->wb_ptr->wb_frag[frag];
f->wb_ctl = WB_TXCTL_TLINK | m->m_len;
if (frag == 0) {
f->wb_ctl |= WB_TXCTL_FIRSTFRAG;
f->wb_status = 0;
} else
f->wb_status = WB_TXSTAT_OWN;
f->wb_next = vtophys(&c->wb_ptr->wb_frag[frag + 1]);
f->wb_data = vtophys(mtod(m, vm_offset_t));
frag++;
}
}
/*
* Handle special case: we used up all 16 fragments,
* but we have more mbufs left in the chain. Copy the
* data into an mbuf cluster. Note that we don't
* bother clearing the values in the other fragment
* pointers/counters; it wouldn't gain us anything,
* and would waste cycles.
*/
if (m != NULL) {
struct mbuf *m_new = NULL;
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
if (m_new == NULL) {
printf("wb%d: no memory for tx list", sc->wb_unit);
return(1);
}
if (m_head->m_pkthdr.len > MHLEN) {
MCLGET(m_new, M_DONTWAIT);
if (!(m_new->m_flags & M_EXT)) {
m_freem(m_new);
printf("wb%d: no memory for tx list",
sc->wb_unit);
return(1);
}
}
m_copydata(m_head, 0, m_head->m_pkthdr.len,
mtod(m_new, caddr_t));
m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len;
m_freem(m_head);
m_head = m_new;
f = &c->wb_ptr->wb_frag[0];
f->wb_status = 0;
f->wb_data = vtophys(mtod(m_new, caddr_t));
f->wb_ctl = total_len = m_new->m_len;
f->wb_ctl |= WB_TXCTL_TLINK|WB_TXCTL_FIRSTFRAG;
frag = 1;
}
if (total_len < WB_MIN_FRAMELEN) {
f = &c->wb_ptr->wb_frag[frag];
f->wb_ctl = WB_MIN_FRAMELEN - total_len;
f->wb_data = vtophys(&sc->wb_cdata.wb_pad);
f->wb_ctl |= WB_TXCTL_TLINK;
f->wb_status = WB_TXSTAT_OWN;
frag++;
}
c->wb_mbuf = m_head;
c->wb_lastdesc = frag - 1;
WB_TXCTL(c) |= WB_TXCTL_LASTFRAG;
WB_TXNEXT(c) = vtophys(&c->wb_nextdesc->wb_ptr->wb_frag[0]);
return(0);
}
/*
* Main transmit routine. To avoid having to do mbuf copies, we put pointers
* to the mbuf data regions directly in the transmit lists. We also save a
* copy of the pointers since the transmit list fragment pointers are
* physical addresses.
*/
static void wb_start(ifp)
struct ifnet *ifp;
{
struct wb_softc *sc;
struct mbuf *m_head = NULL;
struct wb_chain *cur_tx = NULL, *start_tx;
sc = ifp->if_softc;
/*
* Check for an available queue slot. If there are none,
* punt.
*/
if (sc->wb_cdata.wb_tx_free->wb_mbuf != NULL) {
ifp->if_flags |= IFF_OACTIVE;
return;
}
start_tx = sc->wb_cdata.wb_tx_free;
while(sc->wb_cdata.wb_tx_free->wb_mbuf == NULL) {
IF_DEQUEUE(&ifp->if_snd, m_head);
if (m_head == NULL)
break;
/* Pick a descriptor off the free list. */
cur_tx = sc->wb_cdata.wb_tx_free;
sc->wb_cdata.wb_tx_free = cur_tx->wb_nextdesc;
/* Pack the data into the descriptor. */
wb_encap(sc, cur_tx, m_head);
if (cur_tx != start_tx)
WB_TXOWN(cur_tx) = WB_TXSTAT_OWN;
/*
* If there's a BPF listener, bounce a copy of this frame
* to him.
*/
if (ifp->if_bpf)
bpf_mtap(ifp, cur_tx->wb_mbuf);
}
/*
* If there are no packets queued, bail.
*/
if (cur_tx == NULL)
return;
/*
* Place the request for the upload interrupt
* in the last descriptor in the chain. This way, if
* we're chaining several packets at once, we'll only
* get an interupt once for the whole chain rather than
* once for each packet.
*/
WB_TXCTL(cur_tx) |= WB_TXCTL_FINT;
cur_tx->wb_ptr->wb_frag[0].wb_ctl |= WB_TXCTL_FINT;
sc->wb_cdata.wb_tx_tail = cur_tx;
if (sc->wb_cdata.wb_tx_head == NULL) {
sc->wb_cdata.wb_tx_head = start_tx;
WB_TXOWN(start_tx) = WB_TXSTAT_OWN;
CSR_WRITE_4(sc, WB_TXSTART, 0xFFFFFFFF);
} else {
/*
* We need to distinguish between the case where
* the own bit is clear because the chip cleared it
* and where the own bit is clear because we haven't
* set it yet. The magic value WB_UNSET is just some
* ramdomly chosen number which doesn't have the own
* bit set. When we actually transmit the frame, the
* status word will have _only_ the own bit set, so
* the txeoc handler will be able to tell if it needs
* to initiate another transmission to flush out pending
* frames.
*/
WB_TXOWN(start_tx) = WB_UNSENT;
}
/*
* Set a timeout in case the chip goes out to lunch.
*/
ifp->if_timer = 5;
return;
}
static void wb_init(xsc)
void *xsc;
{
struct wb_softc *sc = xsc;
struct ifnet *ifp = &sc->arpcom.ac_if;
int s, i;
struct mii_data *mii;
s = splimp();
mii = device_get_softc(sc->wb_miibus);
/*
* Cancel pending I/O and free all RX/TX buffers.
*/
wb_stop(sc);
wb_reset(sc);
sc->wb_txthresh = WB_TXTHRESH_INIT;
/*
* Set cache alignment and burst length.
*/
#ifdef foo
CSR_WRITE_4(sc, WB_BUSCTL, WB_BUSCTL_CONFIG);
WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_THRESH);
WB_SETBIT(sc, WB_NETCFG, WB_TXTHRESH(sc->wb_txthresh));
#endif
CSR_WRITE_4(sc, WB_BUSCTL, WB_BUSCTL_MUSTBEONE|WB_BUSCTL_ARBITRATION);
WB_SETBIT(sc, WB_BUSCTL, WB_BURSTLEN_16LONG);
switch(sc->wb_cachesize) {
case 32:
WB_SETBIT(sc, WB_BUSCTL, WB_CACHEALIGN_32LONG);
break;
case 16:
WB_SETBIT(sc, WB_BUSCTL, WB_CACHEALIGN_16LONG);
break;
case 8:
WB_SETBIT(sc, WB_BUSCTL, WB_CACHEALIGN_8LONG);
break;
case 0:
default:
WB_SETBIT(sc, WB_BUSCTL, WB_CACHEALIGN_NONE);
break;
}
/* This doesn't tend to work too well at 100Mbps. */
WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_EARLY_ON);
/* Init our MAC address */
for (i = 0; i < ETHER_ADDR_LEN; i++) {
CSR_WRITE_1(sc, WB_NODE0 + i, sc->arpcom.ac_enaddr[i]);
}
/* Init circular RX list. */
if (wb_list_rx_init(sc) == ENOBUFS) {
printf("wb%d: initialization failed: no "
"memory for rx buffers\n", sc->wb_unit);
wb_stop(sc);
(void)splx(s);
return;
}
/* Init TX descriptors. */
wb_list_tx_init(sc);
/* If we want promiscuous mode, set the allframes bit. */
if (ifp->if_flags & IFF_PROMISC) {
WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_RX_ALLPHYS);
} else {
WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_RX_ALLPHYS);
}
/*
* Set capture broadcast bit to capture broadcast frames.
*/
if (ifp->if_flags & IFF_BROADCAST) {
WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_RX_BROAD);
} else {
WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_RX_BROAD);
}
/*
* Program the multicast filter, if necessary.
*/
wb_setmulti(sc);
/*
* Load the address of the RX list.
*/
WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_RX_ON);
CSR_WRITE_4(sc, WB_RXADDR, vtophys(&sc->wb_ldata->wb_rx_list[0]));
/*
* Enable interrupts.
*/
CSR_WRITE_4(sc, WB_IMR, WB_INTRS);
CSR_WRITE_4(sc, WB_ISR, 0xFFFFFFFF);
/* Enable receiver and transmitter. */
WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_RX_ON);
CSR_WRITE_4(sc, WB_RXSTART, 0xFFFFFFFF);
WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON);
CSR_WRITE_4(sc, WB_TXADDR, vtophys(&sc->wb_ldata->wb_tx_list[0]));
WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON);
mii_mediachg(mii);
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
(void)splx(s);
sc->wb_stat_ch = timeout(wb_tick, sc, hz);
return;
}
/*
* Set media options.
*/
static int wb_ifmedia_upd(ifp)
struct ifnet *ifp;
{
struct wb_softc *sc;
sc = ifp->if_softc;
if (ifp->if_flags & IFF_UP)
wb_init(sc);
return(0);
}
/*
* Report current media status.
*/
static void wb_ifmedia_sts(ifp, ifmr)
struct ifnet *ifp;
struct ifmediareq *ifmr;
{
struct wb_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
mii = device_get_softc(sc->wb_miibus);
mii_pollstat(mii);
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
return;
}
static int wb_ioctl(ifp, command, data)
struct ifnet *ifp;
u_long command;
caddr_t data;
{
struct wb_softc *sc = ifp->if_softc;
struct mii_data *mii;
struct ifreq *ifr = (struct ifreq *) data;
int s, error = 0;
s = splimp();
switch(command) {
case SIOCSIFADDR:
case SIOCGIFADDR:
case SIOCSIFMTU:
error = ether_ioctl(ifp, command, data);
break;
case SIOCSIFFLAGS:
if (ifp->if_flags & IFF_UP) {
wb_init(sc);
} else {
if (ifp->if_flags & IFF_RUNNING)
wb_stop(sc);
}
error = 0;
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
wb_setmulti(sc);
error = 0;
break;
case SIOCGIFMEDIA:
case SIOCSIFMEDIA:
mii = device_get_softc(sc->wb_miibus);
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
break;
default:
error = EINVAL;
break;
}
(void)splx(s);
return(error);
}
static void wb_watchdog(ifp)
struct ifnet *ifp;
{
struct wb_softc *sc;
sc = ifp->if_softc;
ifp->if_oerrors++;
printf("wb%d: watchdog timeout\n", sc->wb_unit);
#ifdef foo
if (!(wb_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT))
printf("wb%d: no carrier - transceiver cable problem?\n",
sc->wb_unit);
#endif
wb_stop(sc);
wb_reset(sc);
wb_init(sc);
if (ifp->if_snd.ifq_head != NULL)
wb_start(ifp);
return;
}
/*
* Stop the adapter and free any mbufs allocated to the
* RX and TX lists.
*/
static void wb_stop(sc)
struct wb_softc *sc;
{
register int i;
struct ifnet *ifp;
ifp = &sc->arpcom.ac_if;
ifp->if_timer = 0;
untimeout(wb_tick, sc, sc->wb_stat_ch);
WB_CLRBIT(sc, WB_NETCFG, (WB_NETCFG_RX_ON|WB_NETCFG_TX_ON));
CSR_WRITE_4(sc, WB_IMR, 0x00000000);
CSR_WRITE_4(sc, WB_TXADDR, 0x00000000);
CSR_WRITE_4(sc, WB_RXADDR, 0x00000000);
/*
* Free data in the RX lists.
*/
for (i = 0; i < WB_RX_LIST_CNT; i++) {
if (sc->wb_cdata.wb_rx_chain[i].wb_mbuf != NULL) {
m_freem(sc->wb_cdata.wb_rx_chain[i].wb_mbuf);
sc->wb_cdata.wb_rx_chain[i].wb_mbuf = NULL;
}
}
bzero((char *)&sc->wb_ldata->wb_rx_list,
sizeof(sc->wb_ldata->wb_rx_list));
/*
* Free the TX list buffers.
*/
for (i = 0; i < WB_TX_LIST_CNT; i++) {
if (sc->wb_cdata.wb_tx_chain[i].wb_mbuf != NULL) {
m_freem(sc->wb_cdata.wb_tx_chain[i].wb_mbuf);
sc->wb_cdata.wb_tx_chain[i].wb_mbuf = NULL;
}
}
bzero((char *)&sc->wb_ldata->wb_tx_list,
sizeof(sc->wb_ldata->wb_tx_list));
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
return;
}
/*
* Stop all chip I/O so that the kernel's probe routines don't
* get confused by errant DMAs when rebooting.
*/
static void wb_shutdown(dev)
device_t dev;
{
struct wb_softc *sc;
sc = device_get_softc(dev);
wb_stop(sc);
return;
}