freebsd-skq/sys/dev/isp/isp_sbus.c

830 lines
22 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1997-2006 by Matthew Jacob
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* SBus specific probe and attach routines for Qlogic ISP SCSI adapters.
* FreeBSD Version.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#if __FreeBSD_version >= 700000
#include <sys/linker.h>
#include <sys/firmware.h>
#endif
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/resource.h>
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
#include <dev/ofw/ofw_bus.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <sparc64/sbus/sbusvar.h>
#include <dev/isp/isp_freebsd.h>
static uint32_t
isp_sbus_rd_reg(ispsoftc_t *, int);
static void
isp_sbus_wr_reg(ispsoftc_t *, int, uint32_t);
static int
isp_sbus_rd_isr(ispsoftc_t *, uint32_t *, uint16_t *, uint16_t *);
static int isp_sbus_mbxdma(ispsoftc_t *);
static int
isp_sbus_dmasetup(ispsoftc_t *, XS_T *, ispreq_t *, uint32_t *, uint32_t);
static void isp_sbus_reset0(ispsoftc_t *);
static void isp_sbus_reset1(ispsoftc_t *);
static void isp_sbus_dumpregs(ispsoftc_t *, const char *);
static struct ispmdvec mdvec = {
isp_sbus_rd_isr,
isp_sbus_rd_reg,
isp_sbus_wr_reg,
isp_sbus_mbxdma,
isp_sbus_dmasetup,
isp_common_dmateardown,
isp_sbus_reset0,
isp_sbus_reset1,
isp_sbus_dumpregs,
NULL,
BIU_BURST_ENABLE|BIU_PCI_CONF1_FIFO_64
};
static int isp_sbus_probe (device_t);
static int isp_sbus_attach (device_t);
#define ISP_SBD(isp) ((struct isp_sbussoftc *)isp)->sbus_dev
struct isp_sbussoftc {
ispsoftc_t sbus_isp;
device_t sbus_dev;
struct resource * sbus_reg;
void * ih;
int16_t sbus_poff[_NREG_BLKS];
sdparam sbus_param;
struct ispmdvec sbus_mdvec;
struct resource * sbus_ires;
};
static device_method_t isp_sbus_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, isp_sbus_probe),
DEVMETHOD(device_attach, isp_sbus_attach),
{ 0, 0 }
};
static driver_t isp_sbus_driver = {
"isp", isp_sbus_methods, sizeof (struct isp_sbussoftc)
};
static devclass_t isp_devclass;
DRIVER_MODULE(isp, sbus, isp_sbus_driver, isp_devclass, 0, 0);
#if __FreeBSD_version < 700000
extern ispfwfunc *isp_get_firmware_p;
#endif
static int
isp_sbus_probe(device_t dev)
{
int found = 0;
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
const char *name = ofw_bus_get_name(dev);
if (strcmp(name, "SUNW,isp") == 0 ||
strcmp(name, "QLGC,isp") == 0 ||
strcmp(name, "ptisp") == 0 ||
strcmp(name, "PTI,ptisp") == 0) {
found++;
}
if (!found)
return (ENXIO);
if (isp_announced == 0 && bootverbose) {
printf("Qlogic ISP Driver, FreeBSD Version %d.%d, "
"Core Version %d.%d\n",
ISP_PLATFORM_VERSION_MAJOR, ISP_PLATFORM_VERSION_MINOR,
ISP_CORE_VERSION_MAJOR, ISP_CORE_VERSION_MINOR);
isp_announced++;
}
return (0);
}
static int
isp_sbus_attach(device_t dev)
{
struct resource *regs;
int tval, iqd, isp_debug, role, rid, ispburst;
struct isp_sbussoftc *sbs;
ispsoftc_t *isp = NULL;
int locksetup = 0;
int ints_setup = 0;
/*
* Figure out if we're supposed to skip this one.
* If we are, we actually go to ISP_ROLE_NONE.
*/
tval = 0;
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
"disable", &tval) == 0 && tval) {
device_printf(dev, "device is disabled\n");
/* but return 0 so the !$)$)*!$*) unit isn't reused */
return (0);
}
role = 0;
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
"role", &role) == 0 &&
((role & ~(ISP_ROLE_INITIATOR|ISP_ROLE_TARGET)) == 0)) {
device_printf(dev, "setting role to 0x%x\n", role);
} else {
#ifdef ISP_TARGET_MODE
role = ISP_ROLE_INITIATOR|ISP_ROLE_TARGET;
#else
role = ISP_DEFAULT_ROLES;
#endif
}
sbs = malloc(sizeof (*sbs), M_DEVBUF, M_NOWAIT | M_ZERO);
if (sbs == NULL) {
device_printf(dev, "cannot allocate softc\n");
return (ENOMEM);
}
regs = NULL;
iqd = 0;
rid = 0;
regs = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE);
if (regs == 0) {
device_printf(dev, "unable to map registers\n");
goto bad;
}
sbs->sbus_dev = dev;
sbs->sbus_reg = regs;
sbs->sbus_mdvec = mdvec;
sbs->sbus_poff[BIU_BLOCK >> _BLK_REG_SHFT] = BIU_REGS_OFF;
sbs->sbus_poff[MBOX_BLOCK >> _BLK_REG_SHFT] = SBUS_MBOX_REGS_OFF;
sbs->sbus_poff[SXP_BLOCK >> _BLK_REG_SHFT] = SBUS_SXP_REGS_OFF;
sbs->sbus_poff[RISC_BLOCK >> _BLK_REG_SHFT] = SBUS_RISC_REGS_OFF;
sbs->sbus_poff[DMA_BLOCK >> _BLK_REG_SHFT] = DMA_REGS_OFF;
isp = &sbs->sbus_isp;
isp->isp_bus_tag = rman_get_bustag(regs);
isp->isp_bus_handle = rman_get_bushandle(regs);
isp->isp_mdvec = &sbs->sbus_mdvec;
isp->isp_bustype = ISP_BT_SBUS;
isp->isp_type = ISP_HA_SCSI_UNKNOWN;
isp->isp_param = &sbs->sbus_param;
isp->isp_revision = 0; /* XXX */
isp->isp_role = role;
isp->isp_dev = dev;
/*
* Get the clock frequency and convert it from HZ to MHz,
* rounding up. This defaults to 25MHz if there isn't a
* device specific one in the OFW device tree.
*/
sbs->sbus_mdvec.dv_clock = (sbus_get_clockfreq(dev) + 500000)/1000000;
/*
* Now figure out what the proper burst sizes, etc., to use.
* Unfortunately, there is no ddi_dma_burstsizes here which
* walks up the tree finding the limiting burst size node (if
* any). We just use what's here for isp.
*/
ispburst = sbus_get_burstsz(dev);
if (ispburst == 0) {
ispburst = SBUS_BURST_32 - 1;
}
sbs->sbus_mdvec.dv_conf1 = 0;
if (ispburst & (1 << 5)) {
sbs->sbus_mdvec.dv_conf1 = BIU_SBUS_CONF1_FIFO_32;
} else if (ispburst & (1 << 4)) {
sbs->sbus_mdvec.dv_conf1 = BIU_SBUS_CONF1_FIFO_16;
} else if (ispburst & (1 << 3)) {
sbs->sbus_mdvec.dv_conf1 =
BIU_SBUS_CONF1_BURST8 | BIU_SBUS_CONF1_FIFO_8;
}
if (sbs->sbus_mdvec.dv_conf1) {
sbs->sbus_mdvec.dv_conf1 |= BIU_BURST_ENABLE;
}
/*
* We don't trust NVRAM on SBus cards
*/
isp->isp_confopts |= ISP_CFG_NONVRAM;
/*
* Mark things if we're a PTI SBus adapter.
*/
if (strcmp("PTI,ptisp", ofw_bus_get_name(dev)) == 0 ||
strcmp("ptisp", ofw_bus_get_name(dev)) == 0) {
SDPARAM(isp)->isp_ptisp = 1;
}
#if __FreeBSD_version >= 700000
isp->isp_osinfo.fw = firmware_get("isp_1000");
if (isp->isp_osinfo.fw) {
union {
const void *cp;
uint16_t *sp;
} stupid;
stupid.cp = isp->isp_osinfo.fw->data;
isp->isp_mdvec->dv_ispfw = stupid.sp;
}
#else
/*
* Try and find firmware for this device.
*/
if (isp_get_firmware_p) {
(*isp_get_firmware_p)(0, 0, 0x1000, &sbs->sbus_mdvec.dv_ispfw);
}
#endif
tval = 0;
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
"fwload_disable", &tval) == 0 && tval != 0) {
isp->isp_confopts |= ISP_CFG_NORELOAD;
}
isp->isp_osinfo.default_id = -1;
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
"iid", &tval) == 0) {
isp->isp_osinfo.default_id = tval;
isp->isp_confopts |= ISP_CFG_OWNLOOPID;
}
if (isp->isp_osinfo.default_id == -1) {
/*
* XXX: should be a way to get properties w/o having
* XXX: to call OF_xxx functions
*/
isp->isp_osinfo.default_id = 7;
}
isp_debug = 0;
(void) resource_int_value(device_get_name(dev), device_get_unit(dev),
"debug", &isp_debug);
/* Make sure the lock is set up. */
mtx_init(&isp->isp_osinfo.lock, "isp", NULL, MTX_DEF);
locksetup++;
iqd = 0;
sbs->sbus_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &iqd,
RF_ACTIVE | RF_SHAREABLE);
if (sbs->sbus_ires == NULL) {
device_printf(dev, "could not allocate interrupt\n");
goto bad;
}
if (isp_setup_intr(dev, sbs->sbus_ires, ISP_IFLAGS, NULL,
isp_platform_intr, isp, &sbs->ih)) {
device_printf(dev, "could not setup interrupt\n");
goto bad;
}
ints_setup++;
/*
* Set up logging levels.
*/
if (isp_debug) {
isp->isp_dblev = isp_debug;
} else {
isp->isp_dblev = ISP_LOGWARN|ISP_LOGERR;
}
if (bootverbose) {
isp->isp_dblev |= ISP_LOGCONFIG|ISP_LOGINFO;
}
/*
* Make sure we're in reset state.
*/
isp_reset(isp);
if (isp->isp_state != ISP_RESETSTATE) {
isp_uninit(isp);
goto bad;
}
isp_init(isp);
if (isp->isp_role != ISP_ROLE_NONE && isp->isp_state != ISP_INITSTATE) {
isp_uninit(isp);
goto bad;
}
isp_attach(isp);
if (isp->isp_role != ISP_ROLE_NONE && isp->isp_state != ISP_RUNSTATE) {
isp_uninit(isp);
goto bad;
}
return (0);
bad:
if (sbs && ints_setup) {
(void) bus_teardown_intr(dev, sbs->sbus_ires, sbs->ih);
}
if (sbs && sbs->sbus_ires) {
bus_release_resource(dev, SYS_RES_IRQ, iqd, sbs->sbus_ires);
}
if (locksetup && isp) {
mtx_destroy(&isp->isp_osinfo.lock);
}
if (regs) {
(void) bus_release_resource(dev, 0, 0, regs);
}
if (sbs) {
if (sbs->sbus_isp.isp_param) {
free(sbs->sbus_isp.isp_param, M_DEVBUF);
}
free(sbs, M_DEVBUF);
}
return (ENXIO);
}
#define IspVirt2Off(a, x) \
(((struct isp_sbussoftc *)a)->sbus_poff[((x) & _BLK_REG_MASK) >> \
_BLK_REG_SHFT] + ((x) & 0xff))
#define BXR2(sbc, off) \
bus_space_read_2(isp->isp_bus_tag, isp->isp_bus_handle, off)
static int
isp_sbus_rd_isr(ispsoftc_t *isp, uint32_t *isrp, uint16_t *semap, uint16_t *mbp)
{
uint16_t isr, sema;
isr = BXR2(sbc, IspVirt2Off(isp, BIU_ISR));
sema = BXR2(sbc, IspVirt2Off(isp, BIU_SEMA));
isp_prt(isp, ISP_LOGDEBUG3, "ISR 0x%x SEMA 0x%x", isr, sema);
isr &= INT_PENDING_MASK(isp);
sema &= BIU_SEMA_LOCK;
if (isr == 0 && sema == 0) {
return (0);
}
*isrp = isr;
if ((*semap = sema) != 0) {
*mbp = BXR2(sbc, IspVirt2Off(isp, OUTMAILBOX0));
}
return (1);
}
static uint32_t
isp_sbus_rd_reg(ispsoftc_t *isp, int regoff)
{
uint16_t rval;
struct isp_sbussoftc *sbs = (struct isp_sbussoftc *) isp;
int offset = sbs->sbus_poff[(regoff & _BLK_REG_MASK) >> _BLK_REG_SHFT];
offset += (regoff & 0xff);
rval = bus_space_read_2(isp->isp_bus_tag, isp->isp_bus_handle, offset);
isp_prt(isp, ISP_LOGDEBUG3,
"isp_sbus_rd_reg(off %x) = %x", regoff, rval);
return (rval);
}
static void
isp_sbus_wr_reg(ispsoftc_t *isp, int regoff, uint32_t val)
{
struct isp_sbussoftc *sbs = (struct isp_sbussoftc *) isp;
int offset = sbs->sbus_poff[(regoff & _BLK_REG_MASK) >> _BLK_REG_SHFT];
offset += (regoff & 0xff);
isp_prt(isp, ISP_LOGDEBUG3,
"isp_sbus_wr_reg(off %x) = %x", regoff, val);
bus_space_write_2(isp->isp_bus_tag, isp->isp_bus_handle, offset, val);
MEMORYBARRIER(isp, SYNC_REG, offset, 2);
}
struct imush {
ispsoftc_t *isp;
int error;
};
static void imc(void *, bus_dma_segment_t *, int, int);
static void
imc(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
struct imush *imushp = (struct imush *) arg;
if (error) {
imushp->error = error;
} else {
ispsoftc_t *isp =imushp->isp;
bus_addr_t addr = segs->ds_addr;
isp->isp_rquest_dma = addr;
addr += ISP_QUEUE_SIZE(RQUEST_QUEUE_LEN(isp));
isp->isp_result_dma = addr;
}
}
static int
isp_sbus_mbxdma(ispsoftc_t *isp)
{
caddr_t base;
uint32_t len;
int i, error, ns;
struct imush im;
/*
* Already been here? If so, leave...
*/
if (isp->isp_rquest) {
return (0);
}
ISP_UNLOCK(isp);
len = sizeof (struct isp_pcmd) * isp->isp_maxcmds;
isp->isp_osinfo.pcmd_pool = (struct isp_pcmd *)
malloc(len, M_DEVBUF, M_WAITOK | M_ZERO);
if (isp->isp_osinfo.pcmd_pool == NULL) {
isp_prt(isp, ISP_LOGERR, "cannot alloc pcmd pool");
ISP_LOCK(isp);
return (1);
}
len = sizeof (XS_T **) * isp->isp_maxcmds;
isp->isp_xflist = (XS_T **) malloc(len, M_DEVBUF, M_WAITOK | M_ZERO);
if (isp->isp_xflist == NULL) {
isp_prt(isp, ISP_LOGERR, "cannot alloc xflist array");
ISP_LOCK(isp);
return (1);
}
len = sizeof (bus_dmamap_t) * isp->isp_maxcmds;
2007-05-11 13:47:28 +00:00
if (isp_dma_tag_create(BUS_DMA_ROOTARG(ISP_SBD(isp)), 1,
BUS_SPACE_MAXADDR_24BIT+1, BUS_SPACE_MAXADDR_32BIT,
BUS_SPACE_MAXADDR_32BIT, NULL, NULL, BUS_SPACE_MAXSIZE_32BIT,
ISP_NSEGS, BUS_SPACE_MAXADDR_24BIT, 0, &isp->isp_osinfo.dmat)) {
isp_prt(isp, ISP_LOGERR, "could not create master dma tag");
free(isp->isp_osinfo.pcmd_pool, M_DEVBUF);
free(isp->isp_xflist, M_DEVBUF);
ISP_LOCK(isp);
return(1);
}
/*
* Allocate and map the request, result queues, plus FC scratch area.
*/
len = ISP_QUEUE_SIZE(RQUEST_QUEUE_LEN(isp));
len += ISP_QUEUE_SIZE(RESULT_QUEUE_LEN(isp));
ns = (len / PAGE_SIZE) + 1;
if (isp_dma_tag_create(isp->isp_osinfo.dmat, QENTRY_LEN,
BUS_SPACE_MAXADDR_24BIT+1, BUS_SPACE_MAXADDR_32BIT,
BUS_SPACE_MAXADDR_32BIT, NULL, NULL, len, ns,
BUS_SPACE_MAXADDR_24BIT, 0, &isp->isp_cdmat)) {
isp_prt(isp, ISP_LOGERR,
"cannot create a dma tag for control spaces");
free(isp->isp_osinfo.pcmd_pool, M_DEVBUF);
free(isp->isp_xflist, M_DEVBUF);
ISP_LOCK(isp);
return (1);
}
if (bus_dmamem_alloc(isp->isp_cdmat, (void **)&base, BUS_DMA_NOWAIT,
&isp->isp_cdmap) != 0) {
isp_prt(isp, ISP_LOGERR,
"cannot allocate %d bytes of CCB memory", len);
bus_dma_tag_destroy(isp->isp_cdmat);
free(isp->isp_osinfo.pcmd_pool, M_DEVBUF);
free(isp->isp_xflist, M_DEVBUF);
ISP_LOCK(isp);
return (1);
}
for (i = 0; i < isp->isp_maxcmds; i++) {
struct isp_pcmd *pcmd = &isp->isp_osinfo.pcmd_pool[i];
error = bus_dmamap_create(isp->isp_osinfo.dmat, 0, &pcmd->dmap);
if (error) {
isp_prt(isp, ISP_LOGERR,
"error %d creating per-cmd DMA maps", error);
while (--i >= 0) {
bus_dmamap_destroy(isp->isp_osinfo.dmat,
isp->isp_osinfo.pcmd_pool[i].dmap);
}
goto bad;
}
isp_callout_init(&pcmd->wdog);
if (i == isp->isp_maxcmds-1) {
pcmd->next = NULL;
} else {
pcmd->next = &isp->isp_osinfo.pcmd_pool[i+1];
}
}
isp->isp_osinfo.pcmd_free = &isp->isp_osinfo.pcmd_pool[0];
im.isp = isp;
im.error = 0;
bus_dmamap_load(isp->isp_cdmat, isp->isp_cdmap, base, len, imc, &im, 0);
if (im.error) {
isp_prt(isp, ISP_LOGERR,
"error %d loading dma map for control areas", im.error);
goto bad;
}
isp->isp_rquest = base;
base += ISP_QUEUE_SIZE(RQUEST_QUEUE_LEN(isp));
isp->isp_result = base;
ISP_LOCK(isp);
return (0);
bad:
bus_dmamem_free(isp->isp_cdmat, base, isp->isp_cdmap);
bus_dma_tag_destroy(isp->isp_cdmat);
free(isp->isp_xflist, M_DEVBUF);
free(isp->isp_osinfo.pcmd_pool, M_DEVBUF);
isp->isp_rquest = NULL;
ISP_LOCK(isp);
return (1);
}
typedef struct {
ispsoftc_t *isp;
void *cmd_token;
void *rq;
uint32_t *nxtip;
uint32_t optr;
int error;
} mush_t;
#define MUSHERR_NOQENTRIES -2
static void dma2(void *, bus_dma_segment_t *, int, int);
static void
dma2(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
{
mush_t *mp;
ispsoftc_t *isp;
struct ccb_scsiio *csio;
bus_dma_segment_t *eseg;
ispreq_t *rq;
int seglim, datalen;
uint16_t nxti;
mp = (mush_t *) arg;
if (error) {
mp->error = error;
return;
}
if (nseg < 1) {
isp_prt(mp->isp, ISP_LOGERR, "bad segment count (%d)", nseg);
mp->error = EFAULT;
return;
}
csio = mp->cmd_token;
isp = mp->isp;
rq = mp->rq;
nxti = *mp->nxtip;
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
bus_dmamap_sync(isp->isp_osinfo.dmat,
PISP_PCMD(csio)->dmap, BUS_DMASYNC_PREREAD);
} else {
bus_dmamap_sync(isp->isp_osinfo.dmat,
PISP_PCMD(csio)->dmap, BUS_DMASYNC_PREWRITE);
}
datalen = XS_XFRLEN(csio);
/*
* We're passed an initial partially filled in entry that
* has most fields filled in except for data transfer
* related values.
*
* Our job is to fill in the initial request queue entry and
* then to start allocating and filling in continuation entries
* until we've covered the entire transfer.
*/
if (csio->cdb_len > 12) {
seglim = 0;
} else {
seglim = ISP_RQDSEG;
}
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
rq->req_flags |= REQFLAG_DATA_IN;
} else {
rq->req_flags |= REQFLAG_DATA_OUT;
}
eseg = dm_segs + nseg;
while (datalen != 0 && rq->req_seg_count < seglim && dm_segs != eseg) {
rq->req_dataseg[rq->req_seg_count].ds_base = dm_segs->ds_addr;
rq->req_dataseg[rq->req_seg_count].ds_count = dm_segs->ds_len;
datalen -= dm_segs->ds_len;
rq->req_seg_count++;
dm_segs++;
}
while (datalen > 0 && dm_segs != eseg) {
uint16_t onxti;
ispcontreq_t local, *crq = &local, *cqe;
cqe = (ispcontreq_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, nxti);
onxti = nxti;
nxti = ISP_NXT_QENTRY(onxti, RQUEST_QUEUE_LEN(isp));
if (nxti == mp->optr) {
isp_prt(isp, ISP_LOGDEBUG0, "Request Queue Overflow++");
mp->error = MUSHERR_NOQENTRIES;
return;
}
rq->req_header.rqs_entry_count++;
MEMZERO((void *)crq, sizeof (*crq));
crq->req_header.rqs_entry_count = 1;
crq->req_header.rqs_entry_type = RQSTYPE_DATASEG;
seglim = 0;
while (datalen > 0 && seglim < ISP_CDSEG && dm_segs != eseg) {
crq->req_dataseg[seglim].ds_base =
dm_segs->ds_addr;
crq->req_dataseg[seglim].ds_count =
dm_segs->ds_len;
rq->req_seg_count++;
dm_segs++;
seglim++;
datalen -= dm_segs->ds_len;
}
isp_put_cont_req(isp, crq, cqe);
MEMORYBARRIER(isp, SYNC_REQUEST, onxti, QENTRY_LEN);
}
*mp->nxtip = nxti;
}
static int
isp_sbus_dmasetup(ispsoftc_t *isp, struct ccb_scsiio *csio, ispreq_t *rq,
uint32_t *nxtip, uint32_t optr)
{
ispreq_t *qep;
mush_t mush, *mp;
void (*eptr)(void *, bus_dma_segment_t *, int, int);
qep = (ispreq_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, isp->isp_reqidx);
eptr = dma2;
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE ||
(csio->dxfer_len == 0)) {
rq->req_seg_count = 1;
goto mbxsync;
}
/*
* Do a virtual grapevine step to collect info for
* the callback dma allocation that we have to use...
*/
mp = &mush;
mp->isp = isp;
mp->cmd_token = csio;
mp->rq = rq;
mp->nxtip = nxtip;
mp->optr = optr;
mp->error = 0;
if ((csio->ccb_h.flags & CAM_SCATTER_VALID) == 0) {
if ((csio->ccb_h.flags & CAM_DATA_PHYS) == 0) {
int error = bus_dmamap_load(isp->isp_osinfo.dmat,
PISP_PCMD(csio)->dmap, csio->data_ptr,
csio->dxfer_len, eptr, mp, 0);
if (error == EINPROGRESS) {
bus_dmamap_unload(isp->isp_osinfo.dmat,
PISP_PCMD(csio)->dmap);
mp->error = EINVAL;
isp_prt(isp, ISP_LOGERR,
"deferred dma allocation not supported");
} else if (error && mp->error == 0) {
#ifdef DIAGNOSTIC
isp_prt(isp, ISP_LOGERR,
"error %d in dma mapping code", error);
#endif
mp->error = error;
}
} else {
/* Pointer to physical buffer */
struct bus_dma_segment seg;
seg.ds_addr = (bus_addr_t)csio->data_ptr;
seg.ds_len = csio->dxfer_len;
(*eptr)(mp, &seg, 1, 0);
}
} else {
struct bus_dma_segment *segs;
if ((csio->ccb_h.flags & CAM_DATA_PHYS) != 0) {
isp_prt(isp, ISP_LOGERR,
"Physical segment pointers unsupported");
mp->error = EINVAL;
} else if ((csio->ccb_h.flags & CAM_SG_LIST_PHYS) == 0) {
isp_prt(isp, ISP_LOGERR,
"Virtual segment addresses unsupported");
mp->error = EINVAL;
} else {
/* Just use the segments provided */
segs = (struct bus_dma_segment *) csio->data_ptr;
(*eptr)(mp, segs, csio->sglist_cnt, 0);
}
}
if (mp->error) {
int retval = CMD_COMPLETE;
if (mp->error == MUSHERR_NOQENTRIES) {
retval = CMD_EAGAIN;
} else if (mp->error == EFBIG) {
XS_SETERR(csio, CAM_REQ_TOO_BIG);
} else if (mp->error == EINVAL) {
XS_SETERR(csio, CAM_REQ_INVALID);
} else {
XS_SETERR(csio, CAM_UNREC_HBA_ERROR);
}
return (retval);
}
mbxsync:
if (isp->isp_dblev & ISP_LOGDEBUG1) {
isp_print_bytes(isp, "Request Queue Entry", QENTRY_LEN, rq);
}
switch (rq->req_header.rqs_entry_type) {
case RQSTYPE_REQUEST:
isp_put_request(isp, rq, qep);
break;
case RQSTYPE_CMDONLY:
isp_put_extended_request(isp, (ispextreq_t *)rq,
(ispextreq_t *)qep);
break;
}
return (CMD_QUEUED);
}
static void
isp_sbus_reset0(ispsoftc_t *isp)
{
ISP_DISABLE_INTS(isp);
}
static void
isp_sbus_reset1(ispsoftc_t *isp)
{
ISP_ENABLE_INTS(isp);
}
static void
isp_sbus_dumpregs(ispsoftc_t *isp, const char *msg)
{
if (msg)
printf("%s: %s\n", device_get_nameunit(isp->isp_dev), msg);
else
printf("%s:\n", device_get_nameunit(isp->isp_dev));
printf(" biu_conf1=%x", ISP_READ(isp, BIU_CONF1));
printf(" biu_icr=%x biu_isr=%x biu_sema=%x ", ISP_READ(isp, BIU_ICR),
ISP_READ(isp, BIU_ISR), ISP_READ(isp, BIU_SEMA));
printf("risc_hccr=%x\n", ISP_READ(isp, HCCR));
ISP_WRITE(isp, HCCR, HCCR_CMD_PAUSE);
printf(" cdma_conf=%x cdma_sts=%x cdma_fifostat=%x\n",
ISP_READ(isp, CDMA_CONF), ISP_READ(isp, CDMA_STATUS),
ISP_READ(isp, CDMA_FIFO_STS));
printf(" ddma_conf=%x ddma_sts=%x ddma_fifostat=%x\n",
ISP_READ(isp, DDMA_CONF), ISP_READ(isp, DDMA_STATUS),
ISP_READ(isp, DDMA_FIFO_STS));
printf(" sxp_int=%x sxp_gross=%x sxp(scsi_ctrl)=%x\n",
ISP_READ(isp, SXP_INTERRUPT),
ISP_READ(isp, SXP_GROSS_ERR),
ISP_READ(isp, SXP_PINS_CTRL));
ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE);
printf(" mbox regs: %x %x %x %x %x\n",
ISP_READ(isp, OUTMAILBOX0), ISP_READ(isp, OUTMAILBOX1),
ISP_READ(isp, OUTMAILBOX2), ISP_READ(isp, OUTMAILBOX3),
ISP_READ(isp, OUTMAILBOX4));
}