d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
918e06e655
freebsd-skq/sys/netinet/sctp_pcb.h

663 lines
20 KiB
C
Raw Normal View History

Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*-
- Copyright change, cisco's silly tool wants it to say: "Copyright (c) 2001-2007, by Cisco Systems," instead of *Copyright (c) 2001-2007, Cisco Systems," - Also fix a few straglers that were still in 2006.
2007-05-08 17:01:12 +00:00
* Copyright (c) 2001-2007, by Cisco Systems, Inc. All rights reserved.
Use consistent text at the begining of the files. MFC after: 3 days
2012-05-23 11:26:28 +00:00
* Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
* Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
*
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* a) Redistributions of source code must retain the above copyright notice,
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
* this list of conditions and the following disclaimer.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*
* b) Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
* the documentation and/or other materials provided with the distribution.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*
* c) Neither the name of Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Use consistent text at the begining of the files. MFC after: 3 days
2012-05-23 11:26:28 +00:00
#ifndef _NETINET_SCTP_PCB_H_
#define _NETINET_SCTP_PCB_H_
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#include <netinet/sctp_os.h>
- most all includes (#include <>) migrate to the sctp_os_bsd.h file - Finally all splxx() are removed - Count error fixed in mapping array which might cause a wrong cumack generation. - Invariants around panic for case D + printf when no invariants. - one-to-one model race condition fixed by using a pre-formed connection and then completing the work so accept won't happen on a non-formed association. - Some additional paranoia checks in sctp_output. - Locks that were missing in the accept code. Approved by: gnn
2007-01-18 09:58:43 +00:00
#include <netinet/sctp.h>
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#include <netinet/sctp_constants.h>
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
#include <netinet/sctp_sysctl.h>
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
LIST_HEAD(sctppcbhead, sctp_inpcb);
LIST_HEAD(sctpasochead, sctp_tcb);
LIST_HEAD(sctpladdr, sctp_laddr);
LIST_HEAD(sctpvtaghead, sctp_tagblock);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
LIST_HEAD(sctp_vrflist, sctp_vrf);
LIST_HEAD(sctp_ifnlist, sctp_ifn);
LIST_HEAD(sctp_ifalist, sctp_ifa);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_HEAD(sctp_readhead, sctp_queued_to_read);
TAILQ_HEAD(sctp_streamhead, sctp_stream_queue_pending);
#include <netinet/sctp_structs.h>
#include <netinet/sctp_auth.h>
#define SCTP_PCBHASH_ALLADDR(port, mask) (port & mask)
#define SCTP_PCBHASH_ASOC(tag, mask) (tag & mask)
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_vrf {
LIST_ENTRY(sctp_vrf) next_vrf;
Adds a hash table to speed local address lookup on a per VRF basis (BSD has only one VRF currently). Hash table is sized to 16 but may need to be adjusted for machines with large numbers of addresses. Reviewed by: gnn
2007-03-19 11:11:16 +00:00
struct sctp_ifalist *vrf_addr_hash;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_ifnlist ifnlist;
uint32_t vrf_id;
- fix initial pcb vrf setting when the initial vrf is not the default_vrf_id - Missing lock/unlock of inp added as well in the v6 side. - IFN hash table moves to sctppcbinfo since indexes are unique across systems (including different VRFs) this makes it easier to do ifn lookups.
2007-06-02 11:05:08 +00:00
uint32_t tbl_id_v4; /* default v4 table id */
uint32_t tbl_id_v6; /* default v6 table id */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
uint32_t total_ifa_count;
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
u_long vrf_addr_hashmark;
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
uint32_t refcount;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
};
struct sctp_ifn {
struct sctp_ifalist ifalist;
struct sctp_vrf *vrf;
LIST_ENTRY(sctp_ifn) next_ifn;
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
LIST_ENTRY(sctp_ifn) next_bucket;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
void *ifn_p; /* never access without appropriate lock */
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
uint32_t ifn_mtu;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
uint32_t ifn_type;
uint32_t ifn_index; /* shorthand way to look at ifn for reference */
uint32_t refcount; /* number of reference held should be >=
* ifa_count */
uint32_t ifa_count; /* IFA's we hold (in our list - ifalist) */
- Take out the broken table-id concept. Panda Routers have a M-VRF concept that is NOT well thought out for a multi-homed transport protocol. So the useless table-id entries passed around need to be removed. - Add a event timer for the zero copy api. - Fix a bug in sctp_timer.c when searching for an alternate with the largest ssthresh (the compare was wrong).
2007-06-01 11:19:54 +00:00
uint32_t num_v6; /* number of v6 addresses */
uint32_t num_v4; /* number of v4 addresses */
uint32_t registered_af; /* registered address family for i/f events */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
char ifn_name[SCTP_IFNAMSIZ];
};
/* SCTP local IFA flags */
#define SCTP_ADDR_VALID 0x00000001 /* its up and active */
#define SCTP_BEING_DELETED 0x00000002 /* being deleted, when
* refcount = 0. Note that it
* is pulled from the ifn list
* and ifa_p is nulled right
* away but it cannot be freed
* until the last *net
* pointing to it is deleted. */
#define SCTP_ADDR_DEFER_USE 0x00000004 /* Hold off using this one */
#define SCTP_ADDR_IFA_UNUSEABLE 0x00000008
struct sctp_ifa {
LIST_ENTRY(sctp_ifa) next_ifa;
Adds a hash table to speed local address lookup on a per VRF basis (BSD has only one VRF currently). Hash table is sized to 16 but may need to be adjusted for machines with large numbers of addresses. Reviewed by: gnn
2007-03-19 11:11:16 +00:00
LIST_ENTRY(sctp_ifa) next_bucket;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_ifn *ifn_p; /* back pointer to parent ifn */
void *ifa; /* pointer to ifa, needed for flag update for
* that we MUST lock appropriate locks. This
* is for V6. */
union sctp_sockstore address;
uint32_t refcount; /* number of folks refering to this */
uint32_t flags;
uint32_t localifa_flags;
- Add VRF id to sctp_ifa structure, needed mainly in panda but useful during deletes of ifa's in diff VRF's when applicable.
2007-06-15 03:16:48 +00:00
uint32_t vrf_id; /* vrf_id of this addr (for deleting) */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
uint8_t src_is_loop;
uint8_t src_is_priv;
uint8_t src_is_glob;
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
uint8_t resv;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
};
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_laddr {
LIST_ENTRY(sctp_laddr) sctp_nxt_addr; /* next in list */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_ifa *ifa;
uint32_t action; /* Used during asconf and adding if no-zero
* src-addr selection will not consider this
* address. */
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
struct timeval start_time; /* time when this address was created */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
};
struct sctp_block_entry {
int error;
};
struct sctp_timewait {
uint32_t tv_sec_at_expire; /* the seconds from boot to expire */
uint32_t v_tag; /* the vtag that can not be reused */
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
uint16_t lport; /* the local port used in vtag */
uint16_t rport; /* the remote port used in vtag */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
};
struct sctp_tagblock {
LIST_ENTRY(sctp_tagblock) sctp_nxt_tagblock;
struct sctp_timewait vtag_block[SCTP_NUMBER_IN_VTAG_BLOCK];
};
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_epinfo {
Add support for SCTP/UDP/IPV6. This completes the support of http://tools.ietf.org/html/draft-ietf-tsvwg-sctp-udp-encaps MFC after: 1 week
2012-11-17 20:04:04 +00:00
#ifdef INET
struct socket *udp4_tun_socket;
#endif
#ifdef INET6
struct socket *udp6_tun_socket;
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctpasochead *sctp_asochash;
u_long hashasocmark;
struct sctppcbhead *sctp_ephash;
u_long hashmark;
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
/*-
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* The TCP model represents a substantial overhead in that we get an
* additional hash table to keep explicit connections in. The
* listening TCP endpoint will exist in the usual ephash above and
* accept only INIT's. It will be incapable of sending off an INIT.
* When a dg arrives we must look in the normal ephash. If we find a
* TCP endpoint that will tell us to go to the specific endpoint
* hash and re-hash to find the right assoc/socket. If we find a UDP
* model socket we then must complete the lookup. If this fails,
* i.e. no association can be found then we must continue to see if
* a sctp_peeloff()'d socket is in the tcpephash (a spun off socket
* acts like a TCP model connected socket).
*/
struct sctppcbhead *sctp_tcpephash;
u_long hashtcpmark;
uint32_t hashtblsize;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_vrflist *sctp_vrfhash;
u_long hashvrfmark;
- fix initial pcb vrf setting when the initial vrf is not the default_vrf_id - Missing lock/unlock of inp added as well in the v6 side. - IFN hash table moves to sctppcbinfo since indexes are unique across systems (including different VRFs) this makes it easier to do ifn lookups.
2007-06-02 11:05:08 +00:00
struct sctp_ifnlist *vrf_ifn_hash;
u_long vrf_ifn_hashmark;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctppcbhead listhead;
struct sctpladdr addr_wq;
/* ep zone info */
sctp_zone_t ipi_zone_ep;
sctp_zone_t ipi_zone_asoc;
sctp_zone_t ipi_zone_laddr;
sctp_zone_t ipi_zone_net;
sctp_zone_t ipi_zone_chunk;
sctp_zone_t ipi_zone_readq;
sctp_zone_t ipi_zone_strmoq;
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
sctp_zone_t ipi_zone_asconf;
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
sctp_zone_t ipi_zone_asconf_ack;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
struct rwlock ipi_ep_mtx;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct mtx ipi_iterator_wq_mtx;
- The address lock is changed to a rwlock. This also involves macro changes to have a RLOCK and a WLOCK and placing the correct version within the code. - The INP-INFO lock is changed to a rwlock. - When sctp_shutdown() is called on Mac OS X, the socket lock is held. So call sctp_chunk_output with SCTP_SO_LOCKED and not SCTP_SO_NOT_LOCKED. - Add SCTP_IPI_ADDR_[RW]LOCK and SCTP_IPI_ADDR_[RW]UNLOCK for Mac OS X. - u_int64_t -> uint64_t - add missing addr unlock for error return path Approved by: re@freebsd.org (K Smith)
2007-09-18 15:16:39 +00:00
struct rwlock ipi_addr_mtx;
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
struct mtx ipi_pktlog_mtx;
This adds back the Iterator to the sctp code base. We now properly have ONE thread that services all VNET's. Also we purge out the old timer based iterator code which had multiple LOR's and other issues. MFC after: 3 days
2010-05-16 17:03:56 +00:00
struct mtx wq_addr_mtx;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
uint32_t ipi_count_ep;
/* assoc/tcb zone info */
uint32_t ipi_count_asoc;
/* local addrlist zone info */
uint32_t ipi_count_laddr;
/* remote addrlist zone info */
uint32_t ipi_count_raddr;
/* chunk structure list for output */
uint32_t ipi_count_chunk;
/* socket queue zone info */
uint32_t ipi_count_readq;
/* socket queue zone info */
uint32_t ipi_count_strmoq;
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
/* Number of vrfs */
uint32_t ipi_count_vrfs;
/* Number of ifns */
uint32_t ipi_count_ifns;
/* Number of ifas */
uint32_t ipi_count_ifas;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* system wide number of free chunks hanging around */
uint32_t ipi_free_chunks;
uint32_t ipi_free_strmoq;
-Improvement: Add '\n' on debug output in sctp_lower_sosend(). -Improvement: panic() on INVARIANTS kernels if memory allocation fails for a tagblock in sctp_add_vtag_to_timewait(). -Bugfix: Protect code in sctp_is_in_timewait() by SCTP_INP_INFO_WLOCK/SCTP_INP_INFO_WUNLOCK. -Cleanup: Get rid of unused variable now in sctp_init_asoc(). -Bugfix: Reuse the correct vtag in sctp_add_vtag_to_timewait(). -Cleanup: Get rid of unused constant SCTP_TIME_WAIT_SHORT in sctp_constants.h. -Improvement: Use all hash buckets of the vtag hash table. -Cleanup: Get rid of then unused constant SCTP_STACK_VTAG_HASH_SIZE_A. -Bugfix: Handle SHUTDOWN;SACK packet correctly. -Bugfix: Last TSN in a gap ack block was not being "ack'd" in the internal scoreboard. Obtained from: (with help from Michael Tuexen)
2008-11-12 14:16:39 +00:00
struct sctpvtaghead vtag_timewait[SCTP_STACK_VTAG_HASH_SIZE];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* address work queue handling */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_timer addr_wq_timer;
};
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
struct sctp_base_info {
/*
* All static structures that anchor the system must be here.
*/
struct sctp_epinfo sctppcbinfo;
Adds the option of keeping per-cpu statistics in SCTP. This may be useful since it gets rid of atomics but I want it to remain an option until I can do further testing on if it really speeds things up.
2010-03-24 20:02:40 +00:00
#if defined(__FreeBSD__) && defined(SMP) && defined(SCTP_USE_PERCPU_STAT)
Fix the per CPU stats so that: 1) They don't use the giant "MAX_CPU" define and instead are allocated dynamically based on mp_ncpus 2) Will zero with the netstat -z -s -p sctp 3) Will be properly handled by both the sctp_init and finish (the multi-net stuff was incorrectly bzero'ing in sctp_init the wrong size.. the bzero is now moved to the right places). And of course the free is put in at the very end. MFC after: 3 Months
2011-02-03 11:52:22 +00:00
struct sctpstat *sctpstat;
Adds the option of keeping per-cpu statistics in SCTP. This may be useful since it gets rid of atomics but I want it to remain an option until I can do further testing on if it really speeds things up.
2010-03-24 20:02:40 +00:00
#else
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
struct sctpstat sctpstat;
Adds the option of keeping per-cpu statistics in SCTP. This may be useful since it gets rid of atomics but I want it to remain an option until I can do further testing on if it really speeds things up.
2010-03-24 20:02:40 +00:00
#endif
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
struct sctp_sysctl sctpsysctl;
uint8_t first_time;
char sctp_pcb_initialized;
#if defined(SCTP_PACKET_LOGGING)
int packet_log_writers;
int packet_log_end;
uint8_t packet_log_buffer[SCTP_PACKET_LOG_SIZE];
#endif
};
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
/*-
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* Here we have all the relevant information for each SCTP entity created. We
* will need to modify this as approprate. We also need to figure out how to
* access /dev/random.
*/
struct sctp_pcb {
unsigned int time_of_secret_change; /* number of seconds from
* timeval.tv_sec */
uint32_t secret_key[SCTP_HOW_MANY_SECRETS][SCTP_NUMBER_OF_SECRETS];
unsigned int size_of_a_cookie;
unsigned int sctp_timeoutticks[SCTP_NUM_TMRS];
unsigned int sctp_minrto;
unsigned int sctp_maxrto;
unsigned int initial_rto;
int initial_init_rto_max;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
unsigned int sctp_sack_freq;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
uint32_t sctp_sws_sender;
uint32_t sctp_sws_receiver;
- Modular congestion control, with RFC2581 being the default. - CMT_PF states added (w/sysctl to turn the PF version on) - sctp_input.c had a missing incr of cookie case when the auth was bad. This meant a free was called without an increment to refcnt, added increment like rest of code. - There was a case, unlikely, when the scope of the destination changed (this is a TSNH case). In that case, it would not free the alloc'ed asoc (in sctp_input.c). - When listed addresses found a colliding cookie/Init, then the collided upon tcb was not unlocked in sctp_pcb.c - Add error checking on arguments of sctp_sendx(3) to prevent it from referencing a NULL pointer. - Fix an error return of sctp_sendx(3), it was returing ENOMEM not -1. - Get assoc id was changed to use the sanctified socket api method for getting a assoc id (PEER_ADDR_INFO instead of PEER_ADDR_PARAMS). - Fix it so a peeled off socket will get a proper error return if it trys to send to a different address then it is connected to. - Fix so that select_a_stream can avoid an endless loop that could hang a caller. - time_entered (state set time) was not being set in all cases to the time we went established. Approved by: re(ken smith)
2007-07-14 09:36:28 +00:00
uint32_t sctp_default_cc_module;
Add stream scheduling support. This work is based on a patch received from Robin Seggelmann. MFC after: 3 months.
2011-01-23 19:36:28 +00:00
uint32_t sctp_default_ss_module;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* authentication related fields */
struct sctp_keyhead shared_keys;
sctp_auth_chklist_t *local_auth_chunks;
sctp_hmaclist_t *local_hmacs;
uint16_t default_keyid;
/* various thresholds */
/* Max times I will init at a guy */
uint16_t max_init_times;
/* Max times I will send before we consider someone dead */
uint16_t max_send_times;
uint16_t def_net_failure;
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
uint16_t def_net_pf_threshold;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* number of streams to pre-open on a association */
uint16_t pre_open_stream_count;
uint16_t max_open_streams_intome;
/* random number generator */
uint32_t random_counter;
uint8_t random_numbers[SCTP_SIGNATURE_ALOC_SIZE];
uint8_t random_store[SCTP_SIGNATURE_ALOC_SIZE];
/*
* This timer is kept running per endpoint. When it fires it will
* change the secret key. The default is once a hour
*/
struct sctp_timer signature_change;
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
/* Zero copy full buffer timer */
struct sctp_timer zero_copy_timer;
- Take out the broken table-id concept. Panda Routers have a M-VRF concept that is NOT well thought out for a multi-homed transport protocol. So the useless table-id entries passed around need to be removed. - Add a event timer for the zero copy api. - Fix a bug in sctp_timer.c when searching for an alternate with the largest ssthresh (the compare was wrong).
2007-06-01 11:19:54 +00:00
/* Zero copy app to transport (sendq) read repulse timer */
struct sctp_timer zero_copy_sendq_timer;
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
uint32_t def_cookie_life;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* defaults to 0 */
int auto_close_time;
uint32_t initial_sequence_debug;
uint32_t adaptation_layer_indicator;
Send the adaptation layer indication only if set by the user. MFC after: 3 days Discussed with: rrs
2013-02-11 21:02:49 +00:00
uint8_t adaptation_layer_indicator_provided;
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
uint32_t store_at;
Change infrastructure for SCTP_MAX_BURST to allow compliance with the latest socket API ID. Especially it can be disabled. Full compliance needs changing the structure used in the socket option. Since this breaks the API, it will be a seperate commit which will not be MFCed to stable/8. MFC after: 3 months.
2011-01-26 19:49:03 +00:00
uint32_t max_burst;
1) Allow a chunk to track the cwnd it was at when sent. 2) Add separate max-bursts for retransmit and hb. These are set to sysctlable values but not settable via the socket api. This makes sure we don't blast out HB's or fast-retransmits. 3) Determine on the first data transmission on a net if its local-lan (by being under or over a RTT). This can later be used to think about different algorithms based on locallan vs big-i (experimental) 4) The cwnd should NOT be allowed to grow when an ECNEcho is seen (TCP has this same bug). We fix this in SCTP so an ECNe being seen prevents an advance of cwnd. 5) CWR's should not be sent multiple times to the same network, instead just updating the TSN being transmitted if needed. MFC after: 1 Month
2011-02-02 11:13:23 +00:00
uint32_t fr_max_burst;
Fix the handling of the flowlabel and DSCP value in the SCTP_PEER_ADDR_PARAMS socket option. Honor the net.inet6.ip6.auto_flowlabel sysctl setting. Approved by: re (bz) MFC after: 1 month.
2011-09-14 08:15:21 +00:00
#ifdef INET6
uint32_t default_flowlabel;
#endif
uint8_t default_dscp;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
char current_secret_number;
char last_secret_number;
Add support for the SCTP_REMOTE_UDP_ENCAPS_PORT socket option. Retire the the now unused sctp_udp_tunneling_for_client_enable sysctl variable. MFC after: 3 months.
2011-11-20 15:00:45 +00:00
uint16_t port; /* remote UDP encapsulation port */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
};
#ifndef SCTP_ALIGNMENT
#define SCTP_ALIGNMENT 32
#endif
#ifndef SCTP_ALIGNM1
#define SCTP_ALIGNM1 (SCTP_ALIGNMENT-1)
#endif
#define sctp_lport ip_inp.inp.inp_lport
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
struct sctp_pcbtsn_rlog {
uint32_t vtag;
uint16_t strm;
uint16_t seq;
uint16_t sz;
uint16_t flgs;
};
#define SCTP_READ_LOG_SIZE 135 /* we choose the number to make a pcb a page */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_inpcb {
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
/*-
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* put an inpcb in front of it all, kind of a waste but we need to
* for compatability with all the other stuff.
*/
union {
struct inpcb inp;
char align[(sizeof(struct in6pcb) + SCTP_ALIGNM1) &
~SCTP_ALIGNM1];
} ip_inp;
/* Socket buffer lock protects read_queue and of course sb_cc */
struct sctp_readhead read_queue;
LIST_ENTRY(sctp_inpcb) sctp_list; /* lists all endpoints */
/* hash of all endpoints for model */
LIST_ENTRY(sctp_inpcb) sctp_hash;
/* count of local addresses bound, 0 if bound all */
int laddr_count;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* list of addrs in use by the EP, NULL if bound-all */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctpladdr sctp_addr_list;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/*
* used for source address selection rotation when we are subset
* bound
*/
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_laddr *next_addr_touse;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* back pointer to our socket */
struct socket *sctp_socket;
Make the features a 64-bit value instead of 32-bit. This will allow an easier integration of the support for NDATA. While there, do also some minor cleanups. Obtained from: rrs@ MFC after: 2 weeks
2013-08-12 13:52:15 +00:00
uint64_t sctp_features; /* Feature flags */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
uint32_t sctp_flags; /* INP state flag set */
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
uint32_t sctp_mobility_features; /* Mobility Feature flags */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_pcb sctp_ep;/* SCTP ep data */
/* head of the hash of all associations */
struct sctpasochead *sctp_tcbhash;
u_long sctp_hashmark;
/* head of the list of all associations */
struct sctpasochead sctp_asoc_list;
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
#ifdef SCTP_TRACK_FREED_ASOCS
struct sctpasochead sctp_asoc_free_list;
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_iterator *inp_starting_point_for_iterator;
uint32_t sctp_frag_point;
uint32_t partial_delivery_point;
uint32_t sctp_context;
Make stream our stream reset implementation compliant to RFC6525. MFC after: 1 month
2012-03-29 13:36:53 +00:00
uint8_t local_strreset_support;
Fix the switching on/off of CMT using sysctl and socket option. Fix the switching on/off of PF and NR-SACKs using sysctl. Add minor improvement in handling malloc failures. Improve the address checks when sending. MFC after: 4 weeks
2010-08-28 17:59:51 +00:00
uint32_t sctp_cmt_on_off;
MFC r269436, r269445: Cleanup the ECN configuration handling and provide an SCTP socket option for controlling ECN on future associations and get the status on current associations. A simialar pattern will be used for controlling SCTP extensions in upcoming commits.
2014-08-22 19:57:39 +00:00
uint8_t ecn_supported;
MFC r269448: Add support for the SCTP_PR_SUPPORTED socket option as specified in http://tools.ietf.org/html/draft-ietf-tsvwg-sctp-prpolicies Add also a sysctl controlling the default of the end-points.
2014-08-22 20:01:35 +00:00
uint8_t prsctp_supported;
MFC r269858: Add support for the SCTP_AUTH_SUPPORTED and SCTP_ASCONF_SUPPORTED socket options. Add also a sysctl to control the support of ASCONF.
2014-08-22 20:22:12 +00:00
uint8_t auth_supported;
uint8_t asconf_supported;
MFC r269527: Add support for the SCTP_RECONFIG_SUPPORTED and the corresponding sysctl controlling the negotiation of the RE-CONFIG extension.
2014-08-22 20:16:26 +00:00
uint8_t reconfig_supported;
MFC r269475: Add SCTP socket option SCTP_NRSACK_SUPPORTED to control the NRSACK extension. The default will still be off, since it it not an RFC (yet). Changing the sysctl name will be in a separate commit.
2014-08-22 20:05:09 +00:00
uint8_t nrsack_supported;
MFC r269481: Add support for the SCTP_PKTDROP_SUPPORTED socket option and the corresponding sysctl variable. The default is off, since the specification is not an RFC yet.
2014-08-22 20:08:50 +00:00
uint8_t pktdrop_supported;
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
struct sctp_nonpad_sndrcvinfo def_send;
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
/*-
* These three are here for the sosend_dgram
* (pkt, pkt_last and control).
* routine. However, I don't think anyone in
* the current FreeBSD kernel calls this. So
* they are candidates with sctp_sendm for
* de-supporting.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
struct mbuf *pkt, *pkt_last;
struct mbuf *control;
struct mtx inp_mtx;
struct mtx inp_create_mtx;
struct mtx inp_rdata_mtx;
int32_t refcount;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
uint32_t def_vrf_id;
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
uint32_t total_sends;
uint32_t total_recvs;
uint32_t last_abort_code;
uint32_t total_nospaces;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
struct sctpasochead *sctp_asocidhash;
u_long hashasocidmark;
uint32_t sctp_associd_counter;
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
#ifdef SCTP_ASOCLOG_OF_TSNS
struct sctp_pcbtsn_rlog readlog[SCTP_READ_LOG_SIZE];
uint32_t readlog_index;
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
};
struct sctp_tcb {
struct socket *sctp_socket; /* back pointer to socket */
struct sctp_inpcb *sctp_ep; /* back pointer to ep */
LIST_ENTRY(sctp_tcb) sctp_tcbhash; /* next link in hash
* table */
LIST_ENTRY(sctp_tcb) sctp_tcblist; /* list of all of the
* TCB's */
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
LIST_ENTRY(sctp_tcb) sctp_tcbasocidhash; /* next link in asocid
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* hash table */
LIST_ENTRY(sctp_tcb) sctp_asocs; /* vtag hash list */
struct sctp_block_entry *block_entry; /* pointer locked by socket
* send buffer */
struct sctp_association asoc;
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
/*-
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* freed_by_sorcv_sincelast is protected by the sockbuf_lock NOT the
* tcb_lock. Its special in this way to help avoid extra mutex calls
* in the reading of data.
*/
uint32_t freed_by_sorcv_sincelast;
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
uint32_t total_sends;
uint32_t total_recvs;
int freed_from_where;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
uint16_t rport; /* remote port in network format */
uint16_t resv;
struct mtx tcb_mtx;
struct mtx tcb_send_mtx;
};
#include <netinet/sctp_lock_bsd.h>
1) Adds the rest of the VIMAGE change macros 2) Adds some __UserSpace__ on some of the common defines that the user space code needs 3) Fixes a bug when we send up data to a user that failed. We need to a) trim off the data chunk headers, if present, and b) make sure the frag bit is communicated properly for the msgs coming off the stream queues... i.e. we see if some of the msg has been taken. Obtained from: jeli contributed the VIMAGE changes on this pass Thanks Julain!
2008-07-09 16:45:30 +00:00
/* TODO where to put non-_KERNEL things for __Userspace__? */
#if defined(_KERNEL) || defined(__Userspace__)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
/* Attention Julian, this is the extern that
* goes with the base info. sctp_pcb.c has
* the real definition.
*/
Support for VNET in SCTP (hopefully)
2009-09-17 15:11:12 +00:00
VNET_DECLARE(struct sctp_base_info, system_base_info);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#ifdef INET6
- Adds support for the multi-asconf (From Kozuka-san) - Adds some prepwork (Not all yet) for vimage in particular support the delete the sctppcbinfo.xx structs. There is still a leak in here if it were to be called plus we stil need the regrouping (From Me and Michael Tuexen) - Adds support for UDP tunneling. For BSD there is no socket yet setup so its disabled, but major argument changes are in here to emcompass the passing of the port number (zero when you don't have a udp tunnel, the default for BSD). Will add some hooks in UDP here shortly (discussed with Robert) that will allow easy tunneling. (Mainly from Peter Lei and Michael Tuexen with some BSD work from me :-D) - Some ease for windows, evidently leave is reserved by their compile move label leave: -> out: MFC after: 1 week
2008-05-20 13:47:46 +00:00
int SCTP6_ARE_ADDR_EQUAL(struct sockaddr_in6 *a, struct sockaddr_in6 *b);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Allow SCTP to compile without INET6. PR: 116816 Obtained from tuexen@fh-muenster.de: MFC after: 2 weeks
2008-04-16 17:24:18 +00:00
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
void sctp_fill_pcbinfo(struct sctp_pcbinfo *);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_ifn *
- fix initial pcb vrf setting when the initial vrf is not the default_vrf_id - Missing lock/unlock of inp added as well in the v6 side. - IFN hash table moves to sctppcbinfo since indexes are unique across systems (including different VRFs) this makes it easier to do ifn lookups.
2007-06-02 11:05:08 +00:00
sctp_find_ifn(void *ifn, uint32_t ifn_index);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_vrf *sctp_allocate_vrf(int vrfid);
struct sctp_vrf *sctp_find_vrf(uint32_t vrfid);
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
void sctp_free_vrf(struct sctp_vrf *vrf);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
/*-
* Change address state, can be used if
* O/S supports telling transports about
* changes to IFA/IFN's (link layer triggers).
* If a ifn goes down, we will do src-addr-selection
* and NOT use that, as a source address. This does
* not stop the routing system from routing out
* that interface, but we won't put it as a source.
*/
void sctp_mark_ifa_addr_down(uint32_t vrf_id, struct sockaddr *addr, const char *if_name, uint32_t ifn_index);
void sctp_mark_ifa_addr_up(uint32_t vrf_id, struct sockaddr *addr, const char *if_name, uint32_t ifn_index);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_ifa *
sctp_add_addr_to_vrf(uint32_t vrfid,
void *ifn, uint32_t ifn_index, uint32_t ifn_type,
const char *if_name,
- fix initial pcb vrf setting when the initial vrf is not the default_vrf_id - Missing lock/unlock of inp added as well in the v6 side. - IFN hash table moves to sctppcbinfo since indexes are unique across systems (including different VRFs) this makes it easier to do ifn lookups.
2007-06-02 11:05:08 +00:00
void *ifa, struct sockaddr *addr, uint32_t ifa_flags,
int dynamic_add);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
- fix initial pcb vrf setting when the initial vrf is not the default_vrf_id - Missing lock/unlock of inp added as well in the v6 side. - IFN hash table moves to sctppcbinfo since indexes are unique across systems (including different VRFs) this makes it easier to do ifn lookups.
2007-06-02 11:05:08 +00:00
void sctp_update_ifn_mtu(uint32_t ifn_index, uint32_t mtu);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
void sctp_free_ifn(struct sctp_ifn *sctp_ifnp);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
void sctp_free_ifa(struct sctp_ifa *sctp_ifap);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
void
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_del_addr_from_vrf(uint32_t vrfid, struct sockaddr *addr,
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
uint32_t ifn_index, const char *if_name);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_nets *sctp_findnet(struct sctp_tcb *, struct sockaddr *);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_inpcb *sctp_pcb_findep(struct sockaddr *, int, int, uint32_t);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
int
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
sctp_inpcb_bind(struct socket *, struct sockaddr *,
- take out a needless panic under invariants for sctp_output.c - Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than SCTP_SMALL_IOVEC_SIZE - re-add back inpcb_bind local address check bypass capability - Fix it so sctp_opt_info is independant of assoc_id postion. - Fix cookie life set to use MSEC_TO_TICKS() macro. - asconf changes o More comment changes/clarifications related to the old local address "not" list which is now an explicit restricted list. o Rename some functions for clarity: - sctp_add/del_local_addr_assoc to xxx_local_addr_restricted() - asconf related iterator functions to sctp_asconf_iterator_xxx() o Fix bug when the same address is deleted and added (and removed from the asconf queue) where the ifa is "freed" twice refcount wise, possibly freeing it completely. o Fix bug in output where the first ASCONF would not go out after the last address is changed (e.g. only goes out when retransmitted). o Fix bug where multiple ASCONFs can be bundled in the same packet with the and with the same serial numbers. o Fix asconf stcb iterator to not send ASCONF until after all work queue entries have been processed. o Change behavior so that when the last address is deleted (auto asconf on a bound all endpoint) no action is taken until an address is added; at that time, an ASCONF add+delete is sent (if the assoc is still up). o Fix local address counting so that address scoping is taken into account. o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending of ASCONF (after an RTO). The default now is to send ASCONF immediately (except for the case of changing/deleting the last usable address). Approved by: re(ken smith)@freebsd.org
2007-07-24 20:06:02 +00:00
struct sctp_ifa *, struct thread *);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_tcb *
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_findassociation_addr(struct mbuf *, int,
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
struct sockaddr *, struct sockaddr *,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctphdr *, struct sctp_chunkhdr *, struct sctp_inpcb **,
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
struct sctp_nets **, uint32_t vrf_id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_tcb *
sctp_findassociation_addr_sa(struct sockaddr *,
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sockaddr *, struct sctp_inpcb **, struct sctp_nets **, int, uint32_t);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
void
sctp_move_pcb_and_assoc(struct sctp_inpcb *, struct sctp_inpcb *,
struct sctp_tcb *);
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
/*-
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* For this call ep_addr, the to is the destination endpoint address of the
* peer (relative to outbound). The from field is only used if the TCP model
* is enabled and helps distingush amongst the subset bound (non-boundall).
* The TCP model MAY change the actual ep field, this is why it is passed.
*/
struct sctp_tcb *
sctp_findassociation_ep_addr(struct sctp_inpcb **,
struct sockaddr *, struct sctp_nets **, struct sockaddr *,
struct sctp_tcb *);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
struct sctp_tcb *
sctp_findasoc_ep_asocid_locked(struct sctp_inpcb *inp, sctp_assoc_t asoc_id, int want_lock);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_tcb *
sctp_findassociation_ep_asocid(struct sctp_inpcb *,
sctp_assoc_t, int);
struct sctp_tcb *
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
sctp_findassociation_ep_asconf(struct mbuf *, int, struct sockaddr *,
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
struct sctphdr *, struct sctp_inpcb **, struct sctp_nets **, uint32_t vrf_id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- fix initial pcb vrf setting when the initial vrf is not the default_vrf_id - Missing lock/unlock of inp added as well in the v6 side. - IFN hash table moves to sctppcbinfo since indexes are unique across systems (including different VRFs) this makes it easier to do ifn lookups.
2007-06-02 11:05:08 +00:00
int sctp_inpcb_alloc(struct socket *so, uint32_t vrf_id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
int sctp_is_address_on_local_host(struct sockaddr *addr, uint32_t vrf_id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
void sctp_inpcb_free(struct sctp_inpcb *, int, int);
struct sctp_tcb *
sctp_aloc_assoc(struct sctp_inpcb *, struct sockaddr *,
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
int *, uint32_t, uint32_t, struct thread *);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
int sctp_free_assoc(struct sctp_inpcb *, struct sctp_tcb *, int, int);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
void sctp_delete_from_timewait(uint32_t, uint16_t, uint16_t);
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
int sctp_is_in_timewait(uint32_t tag, uint16_t lport, uint16_t rport);
- Change the Time Wait of vtags value to match the cookie-life - Select a tag gains ability to optionally save new tags off in the timewait system. - When looking up associations do not give back a stcb that is in the about-to-be-freed state, and instead continue looking for other candiates. - New function to query to see if value is in time-wait. - Timewait had a time comparison error that caused very few vtags to actually stay in time-wait. - When setting tags in time-wait, we now use the time requested NOT a fixed constant value. - sstat now gets the proper associd when we do the query. - When we process an association, we expect the tag chosen (if we have one from a cookie) to be in time-wait. Before we would NOT allow the assoc up by checking if its good. In theory this should have caused almost all assoc not to come up except for the time-comparison bug above (this bug was hidden by the time comparison bug :-D). - Don't save tags for nonce values in the time-wait cache since these are used only during cookie collisions and do not matter if they are unique or not. MFC after: 1 week
2007-10-30 14:09:24 +00:00
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
void
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
sctp_add_vtag_to_timewait(uint32_t tag, uint32_t time, uint16_t lport, uint16_t rport);
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
void sctp_add_local_addr_ep(struct sctp_inpcb *, struct sctp_ifa *, uint32_t);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
int sctp_insert_laddr(struct sctpladdr *, struct sctp_ifa *, uint32_t);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
void sctp_remove_laddr(struct sctp_laddr *);
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
void sctp_del_local_addr_ep(struct sctp_inpcb *, struct sctp_ifa *);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
int sctp_add_remote_addr(struct sctp_tcb *, struct sockaddr *, struct sctp_nets **, int, int);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
void sctp_remove_net(struct sctp_tcb *, struct sctp_nets *);
int sctp_del_remote_addr(struct sctp_tcb *, struct sockaddr *);
void sctp_pcb_init(void);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
void sctp_pcb_finish(void);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
- take out a needless panic under invariants for sctp_output.c - Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than SCTP_SMALL_IOVEC_SIZE - re-add back inpcb_bind local address check bypass capability - Fix it so sctp_opt_info is independant of assoc_id postion. - Fix cookie life set to use MSEC_TO_TICKS() macro. - asconf changes o More comment changes/clarifications related to the old local address "not" list which is now an explicit restricted list. o Rename some functions for clarity: - sctp_add/del_local_addr_assoc to xxx_local_addr_restricted() - asconf related iterator functions to sctp_asconf_iterator_xxx() o Fix bug when the same address is deleted and added (and removed from the asconf queue) where the ifa is "freed" twice refcount wise, possibly freeing it completely. o Fix bug in output where the first ASCONF would not go out after the last address is changed (e.g. only goes out when retransmitted). o Fix bug where multiple ASCONFs can be bundled in the same packet with the and with the same serial numbers. o Fix asconf stcb iterator to not send ASCONF until after all work queue entries have been processed. o Change behavior so that when the last address is deleted (auto asconf on a bound all endpoint) no action is taken until an address is added; at that time, an ASCONF add+delete is sent (if the assoc is still up). o Fix local address counting so that address scoping is taken into account. o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending of ASCONF (after an RTO). The default now is to send ASCONF immediately (except for the case of changing/deleting the last usable address). Approved by: re(ken smith)@freebsd.org
2007-07-24 20:06:02 +00:00
void sctp_add_local_addr_restricted(struct sctp_tcb *, struct sctp_ifa *);
void sctp_del_local_addr_restricted(struct sctp_tcb *, struct sctp_ifa *);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
int
Pass the src and dst address of a received packet explicitly around. MFC after: 3 days
2012-06-28 16:01:08 +00:00
sctp_load_addresses_from_init(struct sctp_tcb *, struct mbuf *, int, int,
struct sockaddr *, struct sockaddr *, struct sockaddr *);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
int
sctp_set_primary_addr(struct sctp_tcb *, struct sockaddr *,
struct sctp_nets *);
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
int sctp_is_vtag_good(uint32_t, uint16_t lport, uint16_t rport, struct timeval *);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* void sctp_drain(void); */
int sctp_destination_is_reachable(struct sctp_tcb *, struct sockaddr *);
Adds support for the SCTP_PORT_REUSE option Fixes a refcount bug found in the process Obtained from: With the help of Michael Tuexen
2008-07-31 11:08:30 +00:00
int sctp_swap_inpcb_for_listen(struct sctp_inpcb *inp);
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
/*-
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* Null in last arg inpcb indicate run on ALL ep's. Specific inp in last arg
* indicates run on ONLY assoc's of the specified endpoint.
*/
int
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_initiate_iterator(inp_func inpf,
asoc_func af,
inp_func inpe,
uint32_t, uint32_t,
uint32_t, void *,
uint32_t,
end_func ef,
struct sctp_inpcb *,
uint8_t co_off);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Adds an experimental option to create a pool of threads. These serve as input threads and are queued packets based on the V-tag number. This is similar to what a modern card can do with queue's for TCP... but alas modern cards know nothing about SCTP. MFC after: 3 months (maybe)
2011-02-03 10:05:30 +00:00
#if defined(__FreeBSD__) && defined(SCTP_MCORE_INPUT) && defined(SMP)
void
sctp_queue_to_mcore(struct mbuf *m, int off, int cpu_to_use);
#endif
This does two changes: 1) Makes it so that the INVARIANT function validate nolocks is available anywhere. 2) Fixes a BUG where a close has been done on a collision socket and the cookie processing would return leaving a lock held. MFC after: 1 week
2010-06-05 21:20:28 +00:00
#ifdef INVARIANTS
void
sctp_validate_no_locks(struct sctp_inpcb *inp);
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#endif /* _KERNEL */
#endif /* !__sctp_pcb_h__ */
Reference in New Issue Copy Permalink