freebsd-skq/sys/net/pfil.c

403 lines
9.7 KiB
C
Raw Normal View History

/* $FreeBSD$ */
/* $NetBSD: pfil.c,v 1.20 2001/11/12 23:49:46 lukem Exp $ */
/*-
* Copyright (c) 1996 Matthew R. Green
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/errno.h>
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/rmlock.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/systm.h>
#include <sys/condvar.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/proc.h>
#include <sys/queue.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/pfil.h>
static struct mtx pfil_global_lock;
MTX_SYSINIT(pfil_heads_lock, &pfil_global_lock, "pfil_head_list lock",
MTX_DEF);
static struct packet_filter_hook *pfil_chain_get(int, struct pfil_head *);
static int pfil_chain_add(pfil_chain_t *, struct packet_filter_hook *, int);
static int pfil_chain_remove(pfil_chain_t *, pfil_func_t, void *);
LIST_HEAD(pfilheadhead, pfil_head);
VNET_DEFINE(struct pfilheadhead, pfil_head_list);
#define V_pfil_head_list VNET(pfil_head_list)
VNET_DEFINE(struct rmlock, pfil_lock);
#define V_pfil_lock VNET(pfil_lock)
/*
* pfil_run_hooks() runs the specified packet filter hook chain.
*/
int
pfil_run_hooks(struct pfil_head *ph, struct mbuf **mp, struct ifnet *ifp,
int dir, struct inpcb *inp)
{
struct rm_priotracker rmpt;
struct packet_filter_hook *pfh;
struct mbuf *m = *mp;
int rv = 0;
PFIL_RLOCK(ph, &rmpt);
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
KASSERT(ph->ph_nhooks >= 0, ("Pfil hook count dropped < 0"));
for (pfh = pfil_chain_get(dir, ph); pfh != NULL;
pfh = TAILQ_NEXT(pfh, pfil_chain)) {
if (pfh->pfil_func != NULL) {
rv = (*pfh->pfil_func)(pfh->pfil_arg, &m, ifp, dir,
inp);
if (rv != 0 || m == NULL)
break;
}
}
PFIL_RUNLOCK(ph, &rmpt);
*mp = m;
return (rv);
}
static struct packet_filter_hook *
pfil_chain_get(int dir, struct pfil_head *ph)
{
if (dir == PFIL_IN)
return (TAILQ_FIRST(&ph->ph_in));
else if (dir == PFIL_OUT)
return (TAILQ_FIRST(&ph->ph_out));
else
return (NULL);
}
/*
* pfil_try_rlock() acquires rm reader lock for specified head
2013-03-19 05:51:47 +00:00
* if this is immediately possible.
*/
int
pfil_try_rlock(struct pfil_head *ph, struct rm_priotracker *tracker)
{
2013-03-19 05:51:47 +00:00
return (PFIL_TRY_RLOCK(ph, tracker));
}
/*
* pfil_rlock() acquires rm reader lock for specified head.
*/
void
pfil_rlock(struct pfil_head *ph, struct rm_priotracker *tracker)
{
2013-03-19 05:51:47 +00:00
PFIL_RLOCK(ph, tracker);
}
/*
* pfil_runlock() releases reader lock for specified head.
*/
void
pfil_runlock(struct pfil_head *ph, struct rm_priotracker *tracker)
{
2013-03-19 05:51:47 +00:00
PFIL_RUNLOCK(ph, tracker);
}
/*
* pfil_wlock() acquires writer lock for specified head.
*/
void
pfil_wlock(struct pfil_head *ph)
{
2013-03-19 05:51:47 +00:00
PFIL_WLOCK(ph);
}
/*
* pfil_wunlock() releases writer lock for specified head.
*/
void
pfil_wunlock(struct pfil_head *ph)
{
2013-03-19 05:51:47 +00:00
PFIL_WUNLOCK(ph);
}
/*
2013-03-19 05:51:47 +00:00
* pfil_wowned() returns a non-zero value if the current thread owns
* an exclusive lock.
*/
int
pfil_wowned(struct pfil_head *ph)
{
2013-03-19 05:51:47 +00:00
return (PFIL_WOWNED(ph));
}
/*
* pfil_head_register() registers a pfil_head with the packet filter hook
* mechanism.
*/
int
pfil_head_register(struct pfil_head *ph)
{
struct pfil_head *lph;
PFIL_HEADLIST_LOCK();
LIST_FOREACH(lph, &V_pfil_head_list, ph_list) {
if (ph->ph_type == lph->ph_type &&
ph->ph_un.phu_val == lph->ph_un.phu_val) {
PFIL_HEADLIST_UNLOCK();
return (EEXIST);
}
}
PFIL_LOCK_INIT(ph);
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
ph->ph_nhooks = 0;
TAILQ_INIT(&ph->ph_in);
TAILQ_INIT(&ph->ph_out);
LIST_INSERT_HEAD(&V_pfil_head_list, ph, ph_list);
PFIL_HEADLIST_UNLOCK();
return (0);
}
/*
* pfil_head_unregister() removes a pfil_head from the packet filter hook
* mechanism. The producer of the hook promises that all outstanding
* invocations of the hook have completed before it unregisters the hook.
*/
int
pfil_head_unregister(struct pfil_head *ph)
{
struct packet_filter_hook *pfh, *pfnext;
PFIL_HEADLIST_LOCK();
LIST_REMOVE(ph, ph_list);
PFIL_HEADLIST_UNLOCK();
TAILQ_FOREACH_SAFE(pfh, &ph->ph_in, pfil_chain, pfnext)
free(pfh, M_IFADDR);
TAILQ_FOREACH_SAFE(pfh, &ph->ph_out, pfil_chain, pfnext)
free(pfh, M_IFADDR);
PFIL_LOCK_DESTROY(ph);
return (0);
}
/*
* pfil_head_get() returns the pfil_head for a given key/dlt.
*/
struct pfil_head *
pfil_head_get(int type, u_long val)
{
struct pfil_head *ph;
PFIL_HEADLIST_LOCK();
LIST_FOREACH(ph, &V_pfil_head_list, ph_list)
if (ph->ph_type == type && ph->ph_un.phu_val == val)
break;
PFIL_HEADLIST_UNLOCK();
return (ph);
}
/*
* pfil_add_hook() adds a function to the packet filter hook. the
* flags are:
* PFIL_IN call me on incoming packets
* PFIL_OUT call me on outgoing packets
* PFIL_ALL call me on all of the above
* PFIL_WAITOK OK to call malloc with M_WAITOK.
*/
int
pfil_add_hook(pfil_func_t func, void *arg, int flags, struct pfil_head *ph)
{
struct packet_filter_hook *pfh1 = NULL;
struct packet_filter_hook *pfh2 = NULL;
int err;
if (flags & PFIL_IN) {
pfh1 = (struct packet_filter_hook *)malloc(sizeof(*pfh1),
M_IFADDR, (flags & PFIL_WAITOK) ? M_WAITOK : M_NOWAIT);
if (pfh1 == NULL) {
err = ENOMEM;
goto error;
}
}
if (flags & PFIL_OUT) {
pfh2 = (struct packet_filter_hook *)malloc(sizeof(*pfh1),
M_IFADDR, (flags & PFIL_WAITOK) ? M_WAITOK : M_NOWAIT);
if (pfh2 == NULL) {
err = ENOMEM;
goto error;
}
}
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
PFIL_WLOCK(ph);
if (flags & PFIL_IN) {
pfh1->pfil_func = func;
pfh1->pfil_arg = arg;
err = pfil_chain_add(&ph->ph_in, pfh1, flags & ~PFIL_OUT);
if (err)
goto locked_error;
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
ph->ph_nhooks++;
}
if (flags & PFIL_OUT) {
pfh2->pfil_func = func;
pfh2->pfil_arg = arg;
err = pfil_chain_add(&ph->ph_out, pfh2, flags & ~PFIL_IN);
if (err) {
if (flags & PFIL_IN)
pfil_chain_remove(&ph->ph_in, func, arg);
goto locked_error;
}
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
ph->ph_nhooks++;
}
PFIL_WUNLOCK(ph);
return (0);
locked_error:
PFIL_WUNLOCK(ph);
error:
if (pfh1 != NULL)
free(pfh1, M_IFADDR);
if (pfh2 != NULL)
free(pfh2, M_IFADDR);
return (err);
}
/*
* pfil_remove_hook removes a specific function from the packet filter hook
* chain.
*/
int
pfil_remove_hook(pfil_func_t func, void *arg, int flags, struct pfil_head *ph)
{
int err = 0;
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
PFIL_WLOCK(ph);
if (flags & PFIL_IN) {
err = pfil_chain_remove(&ph->ph_in, func, arg);
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
if (err == 0)
ph->ph_nhooks--;
}
if ((err == 0) && (flags & PFIL_OUT)) {
err = pfil_chain_remove(&ph->ph_out, func, arg);
Somewhat re-factor the read/write locking mechanism associated with the packet filtering mechanisms to use the new rwlock(9) locking API: - Drop the variables stored in the phil_head structure which were specific to conditions and the home rolled read/write locking mechanism. - Drop some includes which were used for condition variables - Drop the inline functions, and convert them to macros. Also, move these macros into pfil.h - Move pfil list locking macros intp phil.h as well - Rename ph_busy_count to ph_nhooks. This variable will represent the number of IN/OUT hooks registered with the pfil head structure - Define PFIL_HOOKED macro which evaluates to true if there are any hooks to be ran by pfil_run_hooks - In the IP/IP6 stacks, change the ph_busy_count comparison to use the new PFIL_HOOKED macro. - Drop optimization in pfil_run_hooks which checks to see if there are any hooks to be ran, and returns if not. This check is already performed by the IP stacks when they call: if (!PFIL_HOOKED(ph)) goto skip_hooks; - Drop in assertion which makes sure that the number of hooks never drops below 0 for good measure. This in theory should never happen, and if it does than there are problems somewhere - Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep - Drop variables which support home rolled read/write locking mechanism from the IPFW firewall chain structure. - Swap out the read/write firewall chain lock internal to use the rwlock(9) API instead of our home rolled version - Convert the inlined functions to macros Reviewed by: mlaier, andre, glebius Thanks to: jhb for the new locking API
2006-02-02 03:13:16 +00:00
if (err == 0)
ph->ph_nhooks--;
}
PFIL_WUNLOCK(ph);
return (err);
}
/*
* Internal: Add a new pfil hook into a hook chain.
*/
static int
pfil_chain_add(pfil_chain_t *chain, struct packet_filter_hook *pfh1, int flags)
{
struct packet_filter_hook *pfh;
/*
* First make sure the hook is not already there.
*/
TAILQ_FOREACH(pfh, chain, pfil_chain)
if (pfh->pfil_func == pfh1->pfil_func &&
pfh->pfil_arg == pfh1->pfil_arg)
return (EEXIST);
/*
* Insert the input list in reverse order of the output list so that
* the same path is followed in or out of the kernel.
*/
if (flags & PFIL_IN)
TAILQ_INSERT_HEAD(chain, pfh1, pfil_chain);
else
TAILQ_INSERT_TAIL(chain, pfh1, pfil_chain);
return (0);
}
/*
* Internal: Remove a pfil hook from a hook chain.
*/
static int
pfil_chain_remove(pfil_chain_t *chain, pfil_func_t func, void *arg)
{
struct packet_filter_hook *pfh;
TAILQ_FOREACH(pfh, chain, pfil_chain)
if (pfh->pfil_func == func && pfh->pfil_arg == arg) {
TAILQ_REMOVE(chain, pfh, pfil_chain);
free(pfh, M_IFADDR);
return (0);
}
return (ENOENT);
}
/*
* Stuff that must be initialized for every instance (including the first of
* course).
*/
static void
vnet_pfil_init(const void *unused __unused)
{
LIST_INIT(&V_pfil_head_list);
PFIL_LOCK_INIT_REAL(&V_pfil_lock, "shared");
}
/*
* Called for the removal of each instance.
*/
static void
vnet_pfil_uninit(const void *unused __unused)
{
KASSERT(LIST_EMPTY(&V_pfil_head_list),
("%s: pfil_head_list %p not empty", __func__, &V_pfil_head_list));
PFIL_LOCK_DESTROY_REAL(&V_pfil_lock);
}
/*
* Starting up.
*
* VNET_SYSINIT is called for each existing vnet and each new vnet.
Get closer to a VIMAGE network stack teardown from top to bottom rather than removing the network interfaces first. This change is rather larger and convoluted as the ordering requirements cannot be separated. Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and related modules to their own SI_SUB_PROTO_FIREWALL. Move initialization of "physical" interfaces to SI_SUB_DRIVERS, move virtual (cloned) interfaces to SI_SUB_PSEUDO. Move Multicast to SI_SUB_PROTO_MC. Re-work parts of multicast initialisation and teardown, not taking the huge amount of memory into account if used as a module yet. For interface teardown we try to do as many of them as we can on SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling over a higher layer protocol such as IP. In that case the interface has to go along (or before) the higher layer protocol is shutdown. Kernel hhooks need to go last on teardown as they may be used at various higher layers and we cannot remove them before we cleaned up the higher layers. For interface teardown there are multiple paths: (a) a cloned interface is destroyed (inside a VIMAGE or in the base system), (b) any interface is moved from a virtual network stack to a different network stack ("vmove"), or (c) a virtual network stack is being shut down. All code paths go through if_detach_internal() where we, depending on the vmove flag or the vnet state, make a decision on how much to shut down; in case we are destroying a VNET the individual protocol layers will cleanup their own parts thus we cannot do so again for each interface as we end up with, e.g., double-frees, destroying locks twice or acquiring already destroyed locks. When calling into protocol cleanups we equally have to tell them whether they need to detach upper layer protocols ("ulp") or not (e.g., in6_ifdetach()). Provide or enahnce helper functions to do proper cleanup at a protocol rather than at an interface level. Approved by: re (hrs) Obtained from: projects/vnet Reviewed by: gnn, jhb Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
* Make sure the pfil bits are first before any possible subsystem which
* might piggyback on the SI_SUB_PROTO_PFIL.
*/
Get closer to a VIMAGE network stack teardown from top to bottom rather than removing the network interfaces first. This change is rather larger and convoluted as the ordering requirements cannot be separated. Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and related modules to their own SI_SUB_PROTO_FIREWALL. Move initialization of "physical" interfaces to SI_SUB_DRIVERS, move virtual (cloned) interfaces to SI_SUB_PSEUDO. Move Multicast to SI_SUB_PROTO_MC. Re-work parts of multicast initialisation and teardown, not taking the huge amount of memory into account if used as a module yet. For interface teardown we try to do as many of them as we can on SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling over a higher layer protocol such as IP. In that case the interface has to go along (or before) the higher layer protocol is shutdown. Kernel hhooks need to go last on teardown as they may be used at various higher layers and we cannot remove them before we cleaned up the higher layers. For interface teardown there are multiple paths: (a) a cloned interface is destroyed (inside a VIMAGE or in the base system), (b) any interface is moved from a virtual network stack to a different network stack ("vmove"), or (c) a virtual network stack is being shut down. All code paths go through if_detach_internal() where we, depending on the vmove flag or the vnet state, make a decision on how much to shut down; in case we are destroying a VNET the individual protocol layers will cleanup their own parts thus we cannot do so again for each interface as we end up with, e.g., double-frees, destroying locks twice or acquiring already destroyed locks. When calling into protocol cleanups we equally have to tell them whether they need to detach upper layer protocols ("ulp") or not (e.g., in6_ifdetach()). Provide or enahnce helper functions to do proper cleanup at a protocol rather than at an interface level. Approved by: re (hrs) Obtained from: projects/vnet Reviewed by: gnn, jhb Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
VNET_SYSINIT(vnet_pfil_init, SI_SUB_PROTO_PFIL, SI_ORDER_FIRST,
vnet_pfil_init, NULL);
/*
* Closing up shop. These are done in REVERSE ORDER. Not called on reboot.
*
* VNET_SYSUNINIT is called for each exiting vnet as it exits.
*/
Get closer to a VIMAGE network stack teardown from top to bottom rather than removing the network interfaces first. This change is rather larger and convoluted as the ordering requirements cannot be separated. Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and related modules to their own SI_SUB_PROTO_FIREWALL. Move initialization of "physical" interfaces to SI_SUB_DRIVERS, move virtual (cloned) interfaces to SI_SUB_PSEUDO. Move Multicast to SI_SUB_PROTO_MC. Re-work parts of multicast initialisation and teardown, not taking the huge amount of memory into account if used as a module yet. For interface teardown we try to do as many of them as we can on SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling over a higher layer protocol such as IP. In that case the interface has to go along (or before) the higher layer protocol is shutdown. Kernel hhooks need to go last on teardown as they may be used at various higher layers and we cannot remove them before we cleaned up the higher layers. For interface teardown there are multiple paths: (a) a cloned interface is destroyed (inside a VIMAGE or in the base system), (b) any interface is moved from a virtual network stack to a different network stack ("vmove"), or (c) a virtual network stack is being shut down. All code paths go through if_detach_internal() where we, depending on the vmove flag or the vnet state, make a decision on how much to shut down; in case we are destroying a VNET the individual protocol layers will cleanup their own parts thus we cannot do so again for each interface as we end up with, e.g., double-frees, destroying locks twice or acquiring already destroyed locks. When calling into protocol cleanups we equally have to tell them whether they need to detach upper layer protocols ("ulp") or not (e.g., in6_ifdetach()). Provide or enahnce helper functions to do proper cleanup at a protocol rather than at an interface level. Approved by: re (hrs) Obtained from: projects/vnet Reviewed by: gnn, jhb Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
VNET_SYSUNINIT(vnet_pfil_uninit, SI_SUB_PROTO_PFIL, SI_ORDER_FIRST,
vnet_pfil_uninit, NULL);