d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
934c5c6da6
freebsd-skq/usr.sbin/powerd/powerd.8

164 lines
4.4 KiB
Groff
Raw Normal View History

Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.\" Copyright (c) 2005 Nate Lawson
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
Put the power modes in a list to make them easier to find. Reviewed by: joel MFC after: 1 week
2013-07-04 12:24:39 +00:00
.Dd July 4, 2013
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.Dt POWERD 8
.Os
.Sh NAME
.Nm powerd
Fixed markup. Approved by: re
2005-06-16 20:01:43 +00:00
.Nd "system power control utility"
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.Sh SYNOPSIS
.Nm
Fixed markup. Approved by: re
2005-06-16 20:01:43 +00:00
.Op Fl a Ar mode
.Op Fl b Ar mode
.Op Fl i Ar percent
Add -m and -M options to control the minimum and maximum frequency. PR: bin/145063 Submitted by: Boris Kochergin <spawk at acm.poly.edu> Reviewed by: cperciva Approved by: rrs (mentor) MFC after: 2 weeks
2010-08-17 09:11:38 +00:00
.Op Fl m Ar freq
.Op Fl M Ar freq
Fixed markup. Approved by: re
2005-06-16 20:01:43 +00:00
.Op Fl n Ar mode
.Op Fl p Ar ival
Add '-P' option which allows to specify pidfile.
2005-08-24 17:32:41 +00:00
.Op Fl P Ar pidfile
Fixed markup. Approved by: re
2005-06-16 20:01:43 +00:00
.Op Fl r Ar percent
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.Op Fl v
.Sh DESCRIPTION
The
.Nm
utility monitors the system state and sets various power control options
accordingly.
Put the power modes in a list to make them easier to find. Reviewed by: joel MFC after: 1 week
2013-07-04 12:24:39 +00:00
It offers power-saving modes that can be
individually selected for operation on AC power or batteries.
.Bl -tag -width ".Ar hiadaptive"
.It Ar maximum
Choose the highest performance values.
May be abbreviated as
.Ar max .
.It Ar minimum
Choose the lowest performance values to get the most power savings.
May be abbreviated as
.Ar min .
.It Ar adaptive
Attempt to strike a balance by degrading performance when the system
appears idle and increasing it when the system is busy.
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
It offers a good balance between a small performance loss for greatly
increased power savings.
Put the power modes in a list to make them easier to find. Reviewed by: joel MFC after: 1 week
2013-07-04 12:24:39 +00:00
May be abbreviated as
.Ar adp .
.It Ar hiadaptive
Like
.Ar adaptive
mode, but tuned for systems where performance and interactivity are
more important than power consumption.
It increases frequency faster, reduces frequency less aggressively, and
Grammar and minor tweaks to powerd(8) man page. PR: docs/133186 Approved by: ed (mentor) MFC after: 2 weeks
2009-12-21 22:56:06 +00:00
will maintain full frequency for longer.
Put the power modes in a list to make them easier to find. Reviewed by: joel MFC after: 1 week
2013-07-04 12:24:39 +00:00
May be abbreviated as
.Ar hadp .
.El
.Pp
The default mode is
.Ar adaptive
for battery power and
.Ar hiadaptive
for the rest.
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.Pp
.Nm
Put the power modes in a list to make them easier to find. Reviewed by: joel MFC after: 1 week
2013-07-04 12:24:39 +00:00
recognizes these runtime options:
Fixed markup. Approved by: re
2005-06-16 20:01:43 +00:00
.Bl -tag -width ".Fl r Ar percent"
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.It Fl a Ar mode
Selects the
.Ar mode
to use while on AC power.
.It Fl b Ar mode
Selects the
.Ar mode
to use while on battery power.
.It Fl i Ar percent
Set of powerd enchancements: 1. Make it more SMP polite. Previous version uses average CPU load that often leads to load underestimation. It make powerd with default configuration unusable on systems with more then 2 CPUs. I propose to use summary load instead of average one. IMO this is the best we can do without specially tuned scheduler. Also as soon as measuring total load on SMP systems is more useful then total idle, I have switched to it. 2. Make powerd's operation independent from number and size of frequency levels. I have added internal frequency counter which translated into real frequencies only on a last stage and only as good as gone. Some systems may have only several power levels, while others - many of them, so adaptation time with previous approach was completely different. 3. As part of previous I have changed adaptive mode to rise frequency on demand up to 2 times and fall on 1/8 per time internal. 4. For desktop (AC-powered) systems I have added one more mode - "hiadaptive". It rises frequency twice faster, drops it 4 times slower, prefers twice lower CPU load and has additional delay before leaving the highest frequency after the period of maximum load. This mode was specially made to improve interactivity of the systems where operation capabilities are more significant then power consumption, but keeping maximum frequency all the time is not needed. 5. I have reduced default polling interval from 1/2 to 1/4 of second. It is not so important for algorithm math now, but gives better system interactivity. Discussed on: mobile@
2008-11-18 13:24:38 +00:00
Specifies the CPU load percent level when adaptive
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
mode should begin to degrade performance to save power.
Set of powerd enchancements: 1. Make it more SMP polite. Previous version uses average CPU load that often leads to load underestimation. It make powerd with default configuration unusable on systems with more then 2 CPUs. I propose to use summary load instead of average one. IMO this is the best we can do without specially tuned scheduler. Also as soon as measuring total load on SMP systems is more useful then total idle, I have switched to it. 2. Make powerd's operation independent from number and size of frequency levels. I have added internal frequency counter which translated into real frequencies only on a last stage and only as good as gone. Some systems may have only several power levels, while others - many of them, so adaptation time with previous approach was completely different. 3. As part of previous I have changed adaptive mode to rise frequency on demand up to 2 times and fall on 1/8 per time internal. 4. For desktop (AC-powered) systems I have added one more mode - "hiadaptive". It rises frequency twice faster, drops it 4 times slower, prefers twice lower CPU load and has additional delay before leaving the highest frequency after the period of maximum load. This mode was specially made to improve interactivity of the systems where operation capabilities are more significant then power consumption, but keeping maximum frequency all the time is not needed. 5. I have reduced default polling interval from 1/2 to 1/4 of second. It is not so important for algorithm math now, but gives better system interactivity. Discussed on: mobile@
2008-11-18 13:24:38 +00:00
The default is 50% or lower.
Add -m and -M options to control the minimum and maximum frequency. PR: bin/145063 Submitted by: Boris Kochergin <spawk at acm.poly.edu> Reviewed by: cperciva Approved by: rrs (mentor) MFC after: 2 weeks
2010-08-17 09:11:38 +00:00
.It Fl m Ar freq
Specifies the minimum frequency to throttle down to.
.It Fl M Ar freq
Specifies the maximum frequency to throttle up to.
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.It Fl n Ar mode
Selects the
.Ar mode
to use normally when the AC line state is unknown.
.It Fl p Ar ival
Specifies a different polling interval (in milliseconds) for AC line state
and system idle levels.
Set of powerd enchancements: 1. Make it more SMP polite. Previous version uses average CPU load that often leads to load underestimation. It make powerd with default configuration unusable on systems with more then 2 CPUs. I propose to use summary load instead of average one. IMO this is the best we can do without specially tuned scheduler. Also as soon as measuring total load on SMP systems is more useful then total idle, I have switched to it. 2. Make powerd's operation independent from number and size of frequency levels. I have added internal frequency counter which translated into real frequencies only on a last stage and only as good as gone. Some systems may have only several power levels, while others - many of them, so adaptation time with previous approach was completely different. 3. As part of previous I have changed adaptive mode to rise frequency on demand up to 2 times and fall on 1/8 per time internal. 4. For desktop (AC-powered) systems I have added one more mode - "hiadaptive". It rises frequency twice faster, drops it 4 times slower, prefers twice lower CPU load and has additional delay before leaving the highest frequency after the period of maximum load. This mode was specially made to improve interactivity of the systems where operation capabilities are more significant then power consumption, but keeping maximum frequency all the time is not needed. 5. I have reduced default polling interval from 1/2 to 1/4 of second. It is not so important for algorithm math now, but gives better system interactivity. Discussed on: mobile@
2008-11-18 13:24:38 +00:00
The default is 250 ms.
Be more consistent with the rest of the manual page.
2005-11-06 20:01:47 +00:00
.It Fl P Ar pidfile
Specifies an alternative file in which the process ID should be stored.
Add '-P' option which allows to specify pidfile.
2005-08-24 17:32:41 +00:00
The default is
.Pa /var/run/powerd.pid .
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.It Fl r Ar percent
Set of powerd enchancements: 1. Make it more SMP polite. Previous version uses average CPU load that often leads to load underestimation. It make powerd with default configuration unusable on systems with more then 2 CPUs. I propose to use summary load instead of average one. IMO this is the best we can do without specially tuned scheduler. Also as soon as measuring total load on SMP systems is more useful then total idle, I have switched to it. 2. Make powerd's operation independent from number and size of frequency levels. I have added internal frequency counter which translated into real frequencies only on a last stage and only as good as gone. Some systems may have only several power levels, while others - many of them, so adaptation time with previous approach was completely different. 3. As part of previous I have changed adaptive mode to rise frequency on demand up to 2 times and fall on 1/8 per time internal. 4. For desktop (AC-powered) systems I have added one more mode - "hiadaptive". It rises frequency twice faster, drops it 4 times slower, prefers twice lower CPU load and has additional delay before leaving the highest frequency after the period of maximum load. This mode was specially made to improve interactivity of the systems where operation capabilities are more significant then power consumption, but keeping maximum frequency all the time is not needed. 5. I have reduced default polling interval from 1/2 to 1/4 of second. It is not so important for algorithm math now, but gives better system interactivity. Discussed on: mobile@
2008-11-18 13:24:38 +00:00
Specifies the CPU load percent level where adaptive
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
mode should consider the CPU running and increase performance.
Fix a typo higter->higher. Spotted by: ganbold
2008-12-24 09:17:30 +00:00
The default is 75% or higher.
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.It Fl v
Verbose mode.
Messages about power changes will be printed to stdout and
.Nm
will operate in the foreground.
.El
.Sh SEE ALSO
.Xr acpi 4 ,
.Xr apm 4 ,
.Xr cpufreq 4
.Sh HISTORY
The
.Nm
utility first appeared in
s/5.5/6.0/ in HISTORY section. Discussed with: ru
2005-11-24 09:25:10 +00:00
.Fx 6.0 .
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.Sh AUTHORS
Fixed markup. Approved by: re
2005-06-16 20:01:43 +00:00
.An -nosplit
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.An Colin Percival
first wrote
Fixed markup. Approved by: re
2005-06-16 20:01:43 +00:00
.Nm estctrl ,
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
the utility that
.Nm
is based on.
.An Nate Lawson
then updated it for
.Xr cpufreq 4 ,
man page -> manual page
2005-02-27 15:49:07 +00:00
added features, and wrote this manual page.
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.Sh BUGS
The
.Nm
utility should also power down idle disks and other components besides the CPU.
.Pp
If
.Nm
Fixed markup. Approved by: re
2005-06-16 20:01:43 +00:00
is used with
.Pa power_profile ,
they may override each other.
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.Pp
Fixed markup. Approved by: re
2005-06-16 20:01:43 +00:00
The
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
.Nm
Fixed markup. Approved by: re
2005-06-16 20:01:43 +00:00
utility
Import powerd(8), a utility for managing power consumption. Currently, it just uses cpufreq(4) but in the future it should also do things like spin down disks. This is based on the work by Colin Percival (called "estctrl").
2005-02-26 21:17:31 +00:00
should probably use the
.Xr devctl 4
interface instead of polling for AC line state.
Reference in New Issue Copy Permalink