freebsd-skq/sys/netinet/tcp_syncache.c

1858 lines
52 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2001 McAfee, Inc.
* Copyright (c) 2006 Andre Oppermann, Internet Business Solutions AG
* All rights reserved.
*
* This software was developed for the FreeBSD Project by Jonathan Lemon
* and McAfee Research, the Security Research Division of McAfee, Inc. under
* DARPA/SPAWAR contract N66001-01-C-8035 ("CBOSS"), as part of the
* DARPA CHATS research program.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipsec.h"
Implement a CPU-affine TCP and UDP connection lookup data structure, struct inpcbgroup. pcbgroups, or "connection groups", supplement the existing inpcbinfo connection hash table, which when pcbgroups are enabled, might now be thought of more usefully as a per-protocol 4-tuple reservation table. Connections are assigned to connection groups base on a hash of their 4-tuple; wildcard sockets require special handling, and are members of all connection groups. During a connection lookup, a per-connection group lock is employed rather than the global pcbinfo lock. By aligning connection groups with input path processing, connection groups take on an effective CPU affinity, especially when aligned with RSS work placement (see a forthcoming commit for details). This eliminates cache line migration associated with global, protocol-layer data structures in steady state TCP and UDP processing (with the exception of protocol-layer statistics; further commit to follow). Elements of this approach were inspired by Willman, Rixner, and Cox's 2006 USENIX paper, "An Evaluation of Network Stack Parallelization Strategies in Modern Operating Systems". However, there are also significant differences: we maintain the inpcb lock, rather than using the connection group lock for per-connection state. Likewise, the focus of this implementation is alignment with NIC packet distribution strategies such as RSS, rather than pure software strategies. Despite that focus, software distribution is supported through the parallel netisr implementation, and works well in configurations where the number of hardware threads is greater than the number of NIC input queues, such as in the RMI XLR threaded MIPS architecture. Another important difference is the continued maintenance of existing hash tables as "reservation tables" -- these are useful both to distinguish the resource allocation aspect of protocol name management and the more common-case lookup aspect. In configurations where connection tables are aligned with hardware hashes, it is desirable to use the traditional lookup tables for loopback or encapsulated traffic rather than take the expense of hardware hashes that are hard to implement efficiently in software (such as RSS Toeplitz). Connection group support is enabled by compiling "options PCBGROUP" into your kernel configuration; for the time being, this is an experimental feature, and hence is not enabled by default. Subject to the limited MFCability of change dependencies in inpcb, and its change to the inpcbinfo init function signature, this change in principle could be merged to FreeBSD 8.x. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-06-06 12:55:02 +00:00
#include "opt_pcbgroup.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/sysctl.h>
#include <sys/limits.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/md5.h>
#include <sys/proc.h> /* for proc0 declaration */
#include <sys/random.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/syslog.h>
#include <sys/ucred.h>
#include <vm/uma.h>
#include <net/if.h>
#include <net/route.h>
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#include <net/vnet.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/in_var.h>
#include <netinet/in_pcb.h>
#include <netinet/ip_var.h>
#include <netinet/ip_options.h>
#ifdef INET6
#include <netinet/ip6.h>
#include <netinet/icmp6.h>
#include <netinet6/nd6.h>
#include <netinet6/ip6_var.h>
#include <netinet6/in6_pcb.h>
#endif
#include <netinet/tcp.h>
#include <netinet/tcp_fsm.h>
#include <netinet/tcp_seq.h>
#include <netinet/tcp_timer.h>
#include <netinet/tcp_var.h>
#include <netinet/tcp_syncache.h>
#ifdef INET6
#include <netinet6/tcp6_var.h>
#endif
#ifdef TCP_OFFLOAD
#include <netinet/toecore.h>
#endif
#ifdef IPSEC
#include <netipsec/ipsec.h>
#ifdef INET6
#include <netipsec/ipsec6.h>
#endif
#include <netipsec/key.h>
#endif /*IPSEC*/
#include <machine/in_cksum.h>
#include <security/mac/mac_framework.h>
static VNET_DEFINE(int, tcp_syncookies) = 1;
#define V_tcp_syncookies VNET(tcp_syncookies)
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
SYSCTL_VNET_INT(_net_inet_tcp, OID_AUTO, syncookies, CTLFLAG_RW,
&VNET_NAME(tcp_syncookies), 0,
"Use TCP SYN cookies if the syncache overflows");
static VNET_DEFINE(int, tcp_syncookiesonly) = 0;
#define V_tcp_syncookiesonly VNET(tcp_syncookiesonly)
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
SYSCTL_VNET_INT(_net_inet_tcp, OID_AUTO, syncookies_only, CTLFLAG_RW,
&VNET_NAME(tcp_syncookiesonly), 0,
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
"Use only TCP SYN cookies");
#ifdef TCP_OFFLOAD
#define ADDED_BY_TOE(sc) ((sc)->sc_tod != NULL)
#endif
static void syncache_drop(struct syncache *, struct syncache_head *);
static void syncache_free(struct syncache *);
static void syncache_insert(struct syncache *, struct syncache_head *);
struct syncache *syncache_lookup(struct in_conninfo *, struct syncache_head **);
static int syncache_respond(struct syncache *);
static struct socket *syncache_socket(struct syncache *, struct socket *,
struct mbuf *m);
static int syncache_sysctl_count(SYSCTL_HANDLER_ARGS);
static void syncache_timeout(struct syncache *sc, struct syncache_head *sch,
int docallout);
static void syncache_timer(void *);
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
static void syncookie_generate(struct syncache_head *, struct syncache *,
u_int32_t *);
static struct syncache
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
*syncookie_lookup(struct in_conninfo *, struct syncache_head *,
struct syncache *, struct tcpopt *, struct tcphdr *,
struct socket *);
/*
* Transmit the SYN,ACK fewer times than TCP_MAXRXTSHIFT specifies.
* 3 retransmits corresponds to a timeout of 3 * (1 + 2 + 4 + 8) == 45 seconds,
* the odds are that the user has given up attempting to connect by then.
*/
#define SYNCACHE_MAXREXMTS 3
/* Arbitrary values */
#define TCP_SYNCACHE_HASHSIZE 512
#define TCP_SYNCACHE_BUCKETLIMIT 30
static VNET_DEFINE(struct tcp_syncache, tcp_syncache);
#define V_tcp_syncache VNET(tcp_syncache)
static SYSCTL_NODE(_net_inet_tcp, OID_AUTO, syncache, CTLFLAG_RW, 0,
"TCP SYN cache");
SYSCTL_VNET_UINT(_net_inet_tcp_syncache, OID_AUTO, bucketlimit, CTLFLAG_RDTUN,
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
&VNET_NAME(tcp_syncache.bucket_limit), 0,
"Per-bucket hash limit for syncache");
SYSCTL_VNET_UINT(_net_inet_tcp_syncache, OID_AUTO, cachelimit, CTLFLAG_RDTUN,
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
&VNET_NAME(tcp_syncache.cache_limit), 0,
"Overall entry limit for syncache");
SYSCTL_VNET_PROC(_net_inet_tcp_syncache, OID_AUTO, count, (CTLTYPE_UINT|CTLFLAG_RD),
NULL, 0, &syncache_sysctl_count, "IU",
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
"Current number of entries in syncache");
SYSCTL_VNET_UINT(_net_inet_tcp_syncache, OID_AUTO, hashsize, CTLFLAG_RDTUN,
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
&VNET_NAME(tcp_syncache.hashsize), 0,
"Size of TCP syncache hashtable");
SYSCTL_VNET_UINT(_net_inet_tcp_syncache, OID_AUTO, rexmtlimit, CTLFLAG_RW,
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
&VNET_NAME(tcp_syncache.rexmt_limit), 0,
"Limit on SYN/ACK retransmissions");
VNET_DEFINE(int, tcp_sc_rst_sock_fail) = 1;
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
SYSCTL_VNET_INT(_net_inet_tcp_syncache, OID_AUTO, rst_on_sock_fail,
CTLFLAG_RW, &VNET_NAME(tcp_sc_rst_sock_fail), 0,
"Send reset on socket allocation failure");
static MALLOC_DEFINE(M_SYNCACHE, "syncache", "TCP syncache");
#define SYNCACHE_HASH(inc, mask) \
((V_tcp_syncache.hash_secret ^ \
(inc)->inc_faddr.s_addr ^ \
((inc)->inc_faddr.s_addr >> 16) ^ \
(inc)->inc_fport ^ (inc)->inc_lport) & mask)
#define SYNCACHE_HASH6(inc, mask) \
((V_tcp_syncache.hash_secret ^ \
(inc)->inc6_faddr.s6_addr32[0] ^ \
(inc)->inc6_faddr.s6_addr32[3] ^ \
(inc)->inc_fport ^ (inc)->inc_lport) & mask)
#define ENDPTS_EQ(a, b) ( \
(a)->ie_fport == (b)->ie_fport && \
(a)->ie_lport == (b)->ie_lport && \
(a)->ie_faddr.s_addr == (b)->ie_faddr.s_addr && \
(a)->ie_laddr.s_addr == (b)->ie_laddr.s_addr \
)
#define ENDPTS6_EQ(a, b) (memcmp(a, b, sizeof(*a)) == 0)
#define SCH_LOCK(sch) mtx_lock(&(sch)->sch_mtx)
#define SCH_UNLOCK(sch) mtx_unlock(&(sch)->sch_mtx)
#define SCH_LOCK_ASSERT(sch) mtx_assert(&(sch)->sch_mtx, MA_OWNED)
/*
* Requires the syncache entry to be already removed from the bucket list.
*/
static void
syncache_free(struct syncache *sc)
{
if (sc->sc_ipopts)
(void) m_free(sc->sc_ipopts);
if (sc->sc_cred)
crfree(sc->sc_cred);
Fix LOR between the syncache and inpcb locks when MAC is present in the kernel. This LOR snuck in with some of the recent syncache changes. To fix this, the inpcb handling was changed: - Hang a MAC label off the syncache object - When the syncache entry is initially created, we pickup the PCB lock is held because we extract information from it while initializing the syncache entry. While we do this, copy the MAC label associated with the PCB and use it for the syncache entry. - When the packet is transmitted, copy the label from the syncache entry to the mbuf so it can be processed by security policies which analyze mbuf labels. This change required that the MAC framework be extended to support the label copy operations from the PCB to the syncache entry, and then from the syncache entry to the mbuf. These functions really should be referencing the syncache structure instead of the label. However, due to some of the complexities associated with exposing this syncache structure we operate directly on it's label pointer. This should be OK since we aren't making any access control decisions within this code directly, we are merely allocating and copying label storage so we can properly initialize mbuf labels for any packets the syncache code might create. This also has a nice side effect of caching. Prior to this change, the PCB would be looked up/locked for each packet transmitted. Now the label is cached at the time the syncache entry is initialized. Submitted by: andre [1] Discussed with: rwatson [1] andre submitted the tcp_syncache.c changes
2006-12-13 06:00:57 +00:00
#ifdef MAC
mac_syncache_destroy(&sc->sc_label);
Fix LOR between the syncache and inpcb locks when MAC is present in the kernel. This LOR snuck in with some of the recent syncache changes. To fix this, the inpcb handling was changed: - Hang a MAC label off the syncache object - When the syncache entry is initially created, we pickup the PCB lock is held because we extract information from it while initializing the syncache entry. While we do this, copy the MAC label associated with the PCB and use it for the syncache entry. - When the packet is transmitted, copy the label from the syncache entry to the mbuf so it can be processed by security policies which analyze mbuf labels. This change required that the MAC framework be extended to support the label copy operations from the PCB to the syncache entry, and then from the syncache entry to the mbuf. These functions really should be referencing the syncache structure instead of the label. However, due to some of the complexities associated with exposing this syncache structure we operate directly on it's label pointer. This should be OK since we aren't making any access control decisions within this code directly, we are merely allocating and copying label storage so we can properly initialize mbuf labels for any packets the syncache code might create. This also has a nice side effect of caching. Prior to this change, the PCB would be looked up/locked for each packet transmitted. Now the label is cached at the time the syncache entry is initialized. Submitted by: andre [1] Discussed with: rwatson [1] andre submitted the tcp_syncache.c changes
2006-12-13 06:00:57 +00:00
#endif
uma_zfree(V_tcp_syncache.zone, sc);
}
void
syncache_init(void)
{
int i;
V_tcp_syncache.hashsize = TCP_SYNCACHE_HASHSIZE;
V_tcp_syncache.bucket_limit = TCP_SYNCACHE_BUCKETLIMIT;
V_tcp_syncache.rexmt_limit = SYNCACHE_MAXREXMTS;
V_tcp_syncache.hash_secret = arc4random();
TUNABLE_INT_FETCH("net.inet.tcp.syncache.hashsize",
&V_tcp_syncache.hashsize);
TUNABLE_INT_FETCH("net.inet.tcp.syncache.bucketlimit",
&V_tcp_syncache.bucket_limit);
if (!powerof2(V_tcp_syncache.hashsize) ||
V_tcp_syncache.hashsize == 0) {
printf("WARNING: syncache hash size is not a power of 2.\n");
V_tcp_syncache.hashsize = TCP_SYNCACHE_HASHSIZE;
}
V_tcp_syncache.hashmask = V_tcp_syncache.hashsize - 1;
/* Set limits. */
V_tcp_syncache.cache_limit =
V_tcp_syncache.hashsize * V_tcp_syncache.bucket_limit;
TUNABLE_INT_FETCH("net.inet.tcp.syncache.cachelimit",
&V_tcp_syncache.cache_limit);
/* Allocate the hash table. */
V_tcp_syncache.hashbase = malloc(V_tcp_syncache.hashsize *
sizeof(struct syncache_head), M_SYNCACHE, M_WAITOK | M_ZERO);
/* Initialize the hash buckets. */
for (i = 0; i < V_tcp_syncache.hashsize; i++) {
Permit buiding kernels with options VIMAGE, restricted to only a single active network stack instance. Turning on options VIMAGE at compile time yields the following changes relative to default kernel build: 1) V_ accessor macros for virtualized variables resolve to structure fields via base pointers, instead of being resolved as fields in global structs or plain global variables. As an example, V_ifnet becomes: options VIMAGE: ((struct vnet_net *) vnet_net)->_ifnet default build: vnet_net_0._ifnet options VIMAGE_GLOBALS: ifnet 2) INIT_VNET_* macros will declare and set up base pointers to be used by V_ accessor macros, instead of resolving to whitespace: INIT_VNET_NET(ifp->if_vnet); becomes struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET]; 3) Memory for vnet modules registered via vnet_mod_register() is now allocated at run time in sys/kern/kern_vimage.c, instead of per vnet module structs being declared as globals. If required, vnet modules can now request the framework to provide them with allocated bzeroed memory by filling in the vmi_size field in their vmi_modinfo structures. 4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are extended to hold a pointer to the parent vnet. options VIMAGE builds will fill in those fields as required. 5) curvnet is introduced as a new global variable in options VIMAGE builds, always pointing to the default and only struct vnet. 6) struct sysctl_oid has been extended with additional two fields to store major and minor virtualization module identifiers, oid_v_subs and oid_v_mod. SYSCTL_V_* family of macros will fill in those fields accordingly, and store the offset in the appropriate vnet container struct in oid_arg1. In sysctl handlers dealing with virtualized sysctls, the SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target variable and make it available in arg1 variable for further processing. Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have been deleted. Reviewed by: bz, rwatson Approved by: julian (mentor)
2009-04-30 13:36:26 +00:00
#ifdef VIMAGE
V_tcp_syncache.hashbase[i].sch_vnet = curvnet;
#endif
TAILQ_INIT(&V_tcp_syncache.hashbase[i].sch_bucket);
mtx_init(&V_tcp_syncache.hashbase[i].sch_mtx, "tcp_sc_head",
NULL, MTX_DEF);
callout_init_mtx(&V_tcp_syncache.hashbase[i].sch_timer,
&V_tcp_syncache.hashbase[i].sch_mtx, 0);
V_tcp_syncache.hashbase[i].sch_length = 0;
}
/* Create the syncache entry zone. */
V_tcp_syncache.zone = uma_zcreate("syncache", sizeof(struct syncache),
NULL, NULL, NULL, NULL, UMA_ALIGN_PTR, 0);
uma_zone_set_max(V_tcp_syncache.zone, V_tcp_syncache.cache_limit);
V_tcp_syncache.cache_limit = uma_zone_get_max(V_tcp_syncache.zone);
}
#ifdef VIMAGE
void
syncache_destroy(void)
{
struct syncache_head *sch;
struct syncache *sc, *nsc;
int i;
/* Cleanup hash buckets: stop timers, free entries, destroy locks. */
for (i = 0; i < V_tcp_syncache.hashsize; i++) {
sch = &V_tcp_syncache.hashbase[i];
callout_drain(&sch->sch_timer);
SCH_LOCK(sch);
TAILQ_FOREACH_SAFE(sc, &sch->sch_bucket, sc_hash, nsc)
syncache_drop(sc, sch);
SCH_UNLOCK(sch);
KASSERT(TAILQ_EMPTY(&sch->sch_bucket),
("%s: sch->sch_bucket not empty", __func__));
KASSERT(sch->sch_length == 0, ("%s: sch->sch_length %d not 0",
__func__, sch->sch_length));
mtx_destroy(&sch->sch_mtx);
}
KASSERT(uma_zone_get_cur(V_tcp_syncache.zone) == 0,
("%s: cache_count not 0", __func__));
/* Free the allocated global resources. */
uma_zdestroy(V_tcp_syncache.zone);
free(V_tcp_syncache.hashbase, M_SYNCACHE);
}
#endif
static int
syncache_sysctl_count(SYSCTL_HANDLER_ARGS)
{
int count;
count = uma_zone_get_cur(V_tcp_syncache.zone);
return (sysctl_handle_int(oidp, &count, 0, req));
}
/*
* Inserts a syncache entry into the specified bucket row.
* Locks and unlocks the syncache_head autonomously.
*/
static void
syncache_insert(struct syncache *sc, struct syncache_head *sch)
{
struct syncache *sc2;
SCH_LOCK(sch);
/*
* Make sure that we don't overflow the per-bucket limit.
* If the bucket is full, toss the oldest element.
*/
if (sch->sch_length >= V_tcp_syncache.bucket_limit) {
KASSERT(!TAILQ_EMPTY(&sch->sch_bucket),
("sch->sch_length incorrect"));
sc2 = TAILQ_LAST(&sch->sch_bucket, sch_head);
syncache_drop(sc2, sch);
TCPSTAT_INC(tcps_sc_bucketoverflow);
}
/* Put it into the bucket. */
TAILQ_INSERT_HEAD(&sch->sch_bucket, sc, sc_hash);
sch->sch_length++;
#ifdef TCP_OFFLOAD
if (ADDED_BY_TOE(sc)) {
struct toedev *tod = sc->sc_tod;
tod->tod_syncache_added(tod, sc->sc_todctx);
}
#endif
/* Reinitialize the bucket row's timer. */
if (sch->sch_length == 1)
sch->sch_nextc = ticks + INT_MAX;
syncache_timeout(sc, sch, 1);
SCH_UNLOCK(sch);
TCPSTAT_INC(tcps_sc_added);
}
/*
* Remove and free entry from syncache bucket row.
* Expects locked syncache head.
*/
static void
syncache_drop(struct syncache *sc, struct syncache_head *sch)
{
SCH_LOCK_ASSERT(sch);
TAILQ_REMOVE(&sch->sch_bucket, sc, sc_hash);
sch->sch_length--;
#ifdef TCP_OFFLOAD
if (ADDED_BY_TOE(sc)) {
struct toedev *tod = sc->sc_tod;
tod->tod_syncache_removed(tod, sc->sc_todctx);
}
#endif
syncache_free(sc);
}
/*
* Engage/reengage time on bucket row.
*/
static void
syncache_timeout(struct syncache *sc, struct syncache_head *sch, int docallout)
{
sc->sc_rxttime = ticks +
TCPTV_RTOBASE * (tcp_syn_backoff[sc->sc_rxmits]);
sc->sc_rxmits++;
if (TSTMP_LT(sc->sc_rxttime, sch->sch_nextc)) {
sch->sch_nextc = sc->sc_rxttime;
if (docallout)
callout_reset(&sch->sch_timer, sch->sch_nextc - ticks,
syncache_timer, (void *)sch);
}
}
/*
* Walk the timer queues, looking for SYN,ACKs that need to be retransmitted.
* If we have retransmitted an entry the maximum number of times, expire it.
* One separate timer for each bucket row.
*/
static void
syncache_timer(void *xsch)
{
struct syncache_head *sch = (struct syncache_head *)xsch;
struct syncache *sc, *nsc;
int tick = ticks;
char *s;
CURVNET_SET(sch->sch_vnet);
/* NB: syncache_head has already been locked by the callout. */
SCH_LOCK_ASSERT(sch);
/*
* In the following cycle we may remove some entries and/or
* advance some timeouts, so re-initialize the bucket timer.
*/
sch->sch_nextc = tick + INT_MAX;
TAILQ_FOREACH_SAFE(sc, &sch->sch_bucket, sc_hash, nsc) {
/*
* We do not check if the listen socket still exists
* and accept the case where the listen socket may be
* gone by the time we resend the SYN/ACK. We do
* not expect this to happens often. If it does,
* then the RST will be sent by the time the remote
* host does the SYN/ACK->ACK.
*/
if (TSTMP_GT(sc->sc_rxttime, tick)) {
if (TSTMP_LT(sc->sc_rxttime, sch->sch_nextc))
sch->sch_nextc = sc->sc_rxttime;
continue;
}
if (sc->sc_rxmits > V_tcp_syncache.rexmt_limit) {
if ((s = tcp_log_addrs(&sc->sc_inc, NULL, NULL, NULL))) {
log(LOG_DEBUG, "%s; %s: Retransmits exhausted, "
"giving up and removing syncache entry\n",
s, __func__);
free(s, M_TCPLOG);
}
syncache_drop(sc, sch);
TCPSTAT_INC(tcps_sc_stale);
continue;
}
if ((s = tcp_log_addrs(&sc->sc_inc, NULL, NULL, NULL))) {
log(LOG_DEBUG, "%s; %s: Response timeout, "
"retransmitting (%u) SYN|ACK\n",
s, __func__, sc->sc_rxmits);
free(s, M_TCPLOG);
}
(void) syncache_respond(sc);
TCPSTAT_INC(tcps_sc_retransmitted);
syncache_timeout(sc, sch, 0);
}
if (!TAILQ_EMPTY(&(sch)->sch_bucket))
callout_reset(&(sch)->sch_timer, (sch)->sch_nextc - tick,
syncache_timer, (void *)(sch));
CURVNET_RESTORE();
}
/*
* Find an entry in the syncache.
* Returns always with locked syncache_head plus a matching entry or NULL.
*/
struct syncache *
syncache_lookup(struct in_conninfo *inc, struct syncache_head **schp)
{
struct syncache *sc;
struct syncache_head *sch;
#ifdef INET6
if (inc->inc_flags & INC_ISIPV6) {
sch = &V_tcp_syncache.hashbase[
SYNCACHE_HASH6(inc, V_tcp_syncache.hashmask)];
*schp = sch;
SCH_LOCK(sch);
/* Circle through bucket row to find matching entry. */
TAILQ_FOREACH(sc, &sch->sch_bucket, sc_hash) {
if (ENDPTS6_EQ(&inc->inc_ie, &sc->sc_inc.inc_ie))
return (sc);
}
} else
#endif
{
sch = &V_tcp_syncache.hashbase[
SYNCACHE_HASH(inc, V_tcp_syncache.hashmask)];
*schp = sch;
SCH_LOCK(sch);
/* Circle through bucket row to find matching entry. */
TAILQ_FOREACH(sc, &sch->sch_bucket, sc_hash) {
#ifdef INET6
if (sc->sc_inc.inc_flags & INC_ISIPV6)
continue;
#endif
if (ENDPTS_EQ(&inc->inc_ie, &sc->sc_inc.inc_ie))
return (sc);
}
}
SCH_LOCK_ASSERT(*schp);
return (NULL); /* always returns with locked sch */
}
/*
* This function is called when we get a RST for a
* non-existent connection, so that we can see if the
* connection is in the syn cache. If it is, zap it.
*/
void
syncache_chkrst(struct in_conninfo *inc, struct tcphdr *th)
{
struct syncache *sc;
struct syncache_head *sch;
char *s = NULL;
sc = syncache_lookup(inc, &sch); /* returns locked sch */
SCH_LOCK_ASSERT(sch);
/*
* Any RST to our SYN|ACK must not carry ACK, SYN or FIN flags.
* See RFC 793 page 65, section SEGMENT ARRIVES.
*/
if (th->th_flags & (TH_ACK|TH_SYN|TH_FIN)) {
if ((s = tcp_log_addrs(inc, th, NULL, NULL)))
log(LOG_DEBUG, "%s; %s: Spurious RST with ACK, SYN or "
"FIN flag set, segment ignored\n", s, __func__);
TCPSTAT_INC(tcps_badrst);
goto done;
}
/*
* No corresponding connection was found in syncache.
* If syncookies are enabled and possibly exclusively
* used, or we are under memory pressure, a valid RST
* may not find a syncache entry. In that case we're
* done and no SYN|ACK retransmissions will happen.
* Otherwise the RST was misdirected or spoofed.
*/
if (sc == NULL) {
if ((s = tcp_log_addrs(inc, th, NULL, NULL)))
log(LOG_DEBUG, "%s; %s: Spurious RST without matching "
"syncache entry (possibly syncookie only), "
"segment ignored\n", s, __func__);
TCPSTAT_INC(tcps_badrst);
goto done;
}
/*
* If the RST bit is set, check the sequence number to see
* if this is a valid reset segment.
* RFC 793 page 37:
* In all states except SYN-SENT, all reset (RST) segments
* are validated by checking their SEQ-fields. A reset is
* valid if its sequence number is in the window.
*
* The sequence number in the reset segment is normally an
* echo of our outgoing acknowlegement numbers, but some hosts
* send a reset with the sequence number at the rightmost edge
* of our receive window, and we have to handle this case.
*/
if (SEQ_GEQ(th->th_seq, sc->sc_irs) &&
SEQ_LEQ(th->th_seq, sc->sc_irs + sc->sc_wnd)) {
syncache_drop(sc, sch);
if ((s = tcp_log_addrs(inc, th, NULL, NULL)))
log(LOG_DEBUG, "%s; %s: Our SYN|ACK was rejected, "
"connection attempt aborted by remote endpoint\n",
s, __func__);
TCPSTAT_INC(tcps_sc_reset);
} else {
if ((s = tcp_log_addrs(inc, th, NULL, NULL)))
log(LOG_DEBUG, "%s; %s: RST with invalid SEQ %u != "
"IRS %u (+WND %u), segment ignored\n",
s, __func__, th->th_seq, sc->sc_irs, sc->sc_wnd);
TCPSTAT_INC(tcps_badrst);
}
done:
if (s != NULL)
free(s, M_TCPLOG);
SCH_UNLOCK(sch);
}
void
syncache_badack(struct in_conninfo *inc)
{
struct syncache *sc;
struct syncache_head *sch;
sc = syncache_lookup(inc, &sch); /* returns locked sch */
SCH_LOCK_ASSERT(sch);
if (sc != NULL) {
syncache_drop(sc, sch);
TCPSTAT_INC(tcps_sc_badack);
}
SCH_UNLOCK(sch);
}
void
syncache_unreach(struct in_conninfo *inc, struct tcphdr *th)
{
struct syncache *sc;
struct syncache_head *sch;
sc = syncache_lookup(inc, &sch); /* returns locked sch */
SCH_LOCK_ASSERT(sch);
if (sc == NULL)
goto done;
/* If the sequence number != sc_iss, then it's a bogus ICMP msg */
if (ntohl(th->th_seq) != sc->sc_iss)
goto done;
/*
* If we've rertransmitted 3 times and this is our second error,
* we remove the entry. Otherwise, we allow it to continue on.
* This prevents us from incorrectly nuking an entry during a
* spurious network outage.
*
* See tcp_notify().
*/
if ((sc->sc_flags & SCF_UNREACH) == 0 || sc->sc_rxmits < 3 + 1) {
sc->sc_flags |= SCF_UNREACH;
goto done;
}
syncache_drop(sc, sch);
TCPSTAT_INC(tcps_sc_unreach);
done:
SCH_UNLOCK(sch);
}
/*
* Build a new TCP socket structure from a syncache entry.
*/
static struct socket *
syncache_socket(struct syncache *sc, struct socket *lso, struct mbuf *m)
{
struct inpcb *inp = NULL;
struct socket *so;
struct tcpcb *tp;
int error;
char *s;
INP_INFO_WLOCK_ASSERT(&V_tcbinfo);
/*
* Ok, create the full blown connection, and set things up
* as they would have been set up if we had created the
* connection when the SYN arrived. If we can't create
* the connection, abort it.
*/
so = sonewconn(lso, SS_ISCONNECTED);
if (so == NULL) {
/*
* Drop the connection; we will either send a RST or
* have the peer retransmit its SYN again after its
* RTO and try again.
*/
TCPSTAT_INC(tcps_listendrop);
if ((s = tcp_log_addrs(&sc->sc_inc, NULL, NULL, NULL))) {
log(LOG_DEBUG, "%s; %s: Socket create failed "
"due to limits or memory shortage\n",
s, __func__);
free(s, M_TCPLOG);
}
goto abort2;
}
#ifdef MAC
mac_socketpeer_set_from_mbuf(m, so);
#endif
inp = sotoinpcb(so);
inp->inp_inc.inc_fibnum = so->so_fibnum;
INP_WLOCK(inp);
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
INP_HASH_WLOCK(&V_tcbinfo);
/* Insert new socket into PCB hash list. */
inp->inp_inc.inc_flags = sc->sc_inc.inc_flags;
#ifdef INET6
if (sc->sc_inc.inc_flags & INC_ISIPV6) {
inp->in6p_laddr = sc->sc_inc.inc6_laddr;
} else {
inp->inp_vflag &= ~INP_IPV6;
inp->inp_vflag |= INP_IPV4;
#endif
inp->inp_laddr = sc->sc_inc.inc_laddr;
#ifdef INET6
}
#endif
Implement a CPU-affine TCP and UDP connection lookup data structure, struct inpcbgroup. pcbgroups, or "connection groups", supplement the existing inpcbinfo connection hash table, which when pcbgroups are enabled, might now be thought of more usefully as a per-protocol 4-tuple reservation table. Connections are assigned to connection groups base on a hash of their 4-tuple; wildcard sockets require special handling, and are members of all connection groups. During a connection lookup, a per-connection group lock is employed rather than the global pcbinfo lock. By aligning connection groups with input path processing, connection groups take on an effective CPU affinity, especially when aligned with RSS work placement (see a forthcoming commit for details). This eliminates cache line migration associated with global, protocol-layer data structures in steady state TCP and UDP processing (with the exception of protocol-layer statistics; further commit to follow). Elements of this approach were inspired by Willman, Rixner, and Cox's 2006 USENIX paper, "An Evaluation of Network Stack Parallelization Strategies in Modern Operating Systems". However, there are also significant differences: we maintain the inpcb lock, rather than using the connection group lock for per-connection state. Likewise, the focus of this implementation is alignment with NIC packet distribution strategies such as RSS, rather than pure software strategies. Despite that focus, software distribution is supported through the parallel netisr implementation, and works well in configurations where the number of hardware threads is greater than the number of NIC input queues, such as in the RMI XLR threaded MIPS architecture. Another important difference is the continued maintenance of existing hash tables as "reservation tables" -- these are useful both to distinguish the resource allocation aspect of protocol name management and the more common-case lookup aspect. In configurations where connection tables are aligned with hardware hashes, it is desirable to use the traditional lookup tables for loopback or encapsulated traffic rather than take the expense of hardware hashes that are hard to implement efficiently in software (such as RSS Toeplitz). Connection group support is enabled by compiling "options PCBGROUP" into your kernel configuration; for the time being, this is an experimental feature, and hence is not enabled by default. Subject to the limited MFCability of change dependencies in inpcb, and its change to the inpcbinfo init function signature, this change in principle could be merged to FreeBSD 8.x. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-06-06 12:55:02 +00:00
/*
* Install in the reservation hash table for now, but don't yet
* install a connection group since the full 4-tuple isn't yet
* configured.
*/
inp->inp_lport = sc->sc_inc.inc_lport;
Implement a CPU-affine TCP and UDP connection lookup data structure, struct inpcbgroup. pcbgroups, or "connection groups", supplement the existing inpcbinfo connection hash table, which when pcbgroups are enabled, might now be thought of more usefully as a per-protocol 4-tuple reservation table. Connections are assigned to connection groups base on a hash of their 4-tuple; wildcard sockets require special handling, and are members of all connection groups. During a connection lookup, a per-connection group lock is employed rather than the global pcbinfo lock. By aligning connection groups with input path processing, connection groups take on an effective CPU affinity, especially when aligned with RSS work placement (see a forthcoming commit for details). This eliminates cache line migration associated with global, protocol-layer data structures in steady state TCP and UDP processing (with the exception of protocol-layer statistics; further commit to follow). Elements of this approach were inspired by Willman, Rixner, and Cox's 2006 USENIX paper, "An Evaluation of Network Stack Parallelization Strategies in Modern Operating Systems". However, there are also significant differences: we maintain the inpcb lock, rather than using the connection group lock for per-connection state. Likewise, the focus of this implementation is alignment with NIC packet distribution strategies such as RSS, rather than pure software strategies. Despite that focus, software distribution is supported through the parallel netisr implementation, and works well in configurations where the number of hardware threads is greater than the number of NIC input queues, such as in the RMI XLR threaded MIPS architecture. Another important difference is the continued maintenance of existing hash tables as "reservation tables" -- these are useful both to distinguish the resource allocation aspect of protocol name management and the more common-case lookup aspect. In configurations where connection tables are aligned with hardware hashes, it is desirable to use the traditional lookup tables for loopback or encapsulated traffic rather than take the expense of hardware hashes that are hard to implement efficiently in software (such as RSS Toeplitz). Connection group support is enabled by compiling "options PCBGROUP" into your kernel configuration; for the time being, this is an experimental feature, and hence is not enabled by default. Subject to the limited MFCability of change dependencies in inpcb, and its change to the inpcbinfo init function signature, this change in principle could be merged to FreeBSD 8.x. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-06-06 12:55:02 +00:00
if ((error = in_pcbinshash_nopcbgroup(inp)) != 0) {
/*
* Undo the assignments above if we failed to
* put the PCB on the hash lists.
*/
#ifdef INET6
if (sc->sc_inc.inc_flags & INC_ISIPV6)
inp->in6p_laddr = in6addr_any;
else
#endif
inp->inp_laddr.s_addr = INADDR_ANY;
inp->inp_lport = 0;
if ((s = tcp_log_addrs(&sc->sc_inc, NULL, NULL, NULL))) {
log(LOG_DEBUG, "%s; %s: in_pcbinshash failed "
"with error %i\n",
s, __func__, error);
free(s, M_TCPLOG);
}
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
INP_HASH_WUNLOCK(&V_tcbinfo);
goto abort;
}
#ifdef IPSEC
/* Copy old policy into new socket's. */
if (ipsec_copy_policy(sotoinpcb(lso)->inp_sp, inp->inp_sp))
printf("syncache_socket: could not copy policy\n");
#endif
#ifdef INET6
if (sc->sc_inc.inc_flags & INC_ISIPV6) {
struct inpcb *oinp = sotoinpcb(lso);
struct in6_addr laddr6;
struct sockaddr_in6 sin6;
/*
* Inherit socket options from the listening socket.
* Note that in6p_inputopts are not (and should not be)
* copied, since it stores previously received options and is
* used to detect if each new option is different than the
* previous one and hence should be passed to a user.
* If we copied in6p_inputopts, a user would not be able to
* receive options just after calling the accept system call.
*/
inp->inp_flags |= oinp->inp_flags & INP_CONTROLOPTS;
if (oinp->in6p_outputopts)
inp->in6p_outputopts =
ip6_copypktopts(oinp->in6p_outputopts, M_NOWAIT);
sin6.sin6_family = AF_INET6;
sin6.sin6_len = sizeof(sin6);
sin6.sin6_addr = sc->sc_inc.inc6_faddr;
sin6.sin6_port = sc->sc_inc.inc_fport;
sin6.sin6_flowinfo = sin6.sin6_scope_id = 0;
laddr6 = inp->in6p_laddr;
if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr))
inp->in6p_laddr = sc->sc_inc.inc6_laddr;
if ((error = in6_pcbconnect_mbuf(inp, (struct sockaddr *)&sin6,
thread0.td_ucred, m)) != 0) {
inp->in6p_laddr = laddr6;
if ((s = tcp_log_addrs(&sc->sc_inc, NULL, NULL, NULL))) {
log(LOG_DEBUG, "%s; %s: in6_pcbconnect failed "
"with error %i\n",
s, __func__, error);
free(s, M_TCPLOG);
}
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
INP_HASH_WUNLOCK(&V_tcbinfo);
goto abort;
}
/* Override flowlabel from in6_pcbconnect. */
inp->inp_flow &= ~IPV6_FLOWLABEL_MASK;
inp->inp_flow |= sc->sc_flowlabel;
}
#endif /* INET6 */
#if defined(INET) && defined(INET6)
else
#endif
#ifdef INET
{
struct in_addr laddr;
struct sockaddr_in sin;
inp->inp_options = (m) ? ip_srcroute(m) : NULL;
if (inp->inp_options == NULL) {
inp->inp_options = sc->sc_ipopts;
sc->sc_ipopts = NULL;
}
sin.sin_family = AF_INET;
sin.sin_len = sizeof(sin);
sin.sin_addr = sc->sc_inc.inc_faddr;
sin.sin_port = sc->sc_inc.inc_fport;
bzero((caddr_t)sin.sin_zero, sizeof(sin.sin_zero));
laddr = inp->inp_laddr;
if (inp->inp_laddr.s_addr == INADDR_ANY)
inp->inp_laddr = sc->sc_inc.inc_laddr;
if ((error = in_pcbconnect_mbuf(inp, (struct sockaddr *)&sin,
thread0.td_ucred, m)) != 0) {
inp->inp_laddr = laddr;
if ((s = tcp_log_addrs(&sc->sc_inc, NULL, NULL, NULL))) {
log(LOG_DEBUG, "%s; %s: in_pcbconnect failed "
"with error %i\n",
s, __func__, error);
free(s, M_TCPLOG);
}
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
INP_HASH_WUNLOCK(&V_tcbinfo);
goto abort;
}
}
#endif /* INET */
Decompose the current single inpcbinfo lock into two locks: - The existing ipi_lock continues to protect the global inpcb list and inpcb counter. This lock is now relegated to a small number of allocation and free operations, and occasional operations that walk all connections (including, awkwardly, certain UDP multicast receive operations -- something to revisit). - A new ipi_hash_lock protects the two inpcbinfo hash tables for looking up connections and bound sockets, manipulated using new INP_HASH_*() macros. This lock, combined with inpcb locks, protects the 4-tuple address space. Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb connection locks, so may be acquired while manipulating a connection on which a lock is already held, avoiding the need to acquire the inpcbinfo lock preemptively when a binding change might later be required. As a result, however, lookup operations necessarily go through a reference acquire while holding the lookup lock, later acquiring an inpcb lock -- if required. A new function in_pcblookup() looks up connections, and accepts flags indicating how to return the inpcb. Due to lock order changes, callers no longer need acquire locks before performing a lookup: the lookup routine will acquire the ipi_hash_lock as needed. In the future, it will also be able to use alternative lookup and locking strategies transparently to callers, such as pcbgroup lookup. New lookup flags are, supplementing the existing INPLOOKUP_WILDCARD flag: INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb Callers must pass exactly one of these flags (for the time being). Some notes: - All protocols are updated to work within the new regime; especially, TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely eliminated, and global hash lock hold times are dramatically reduced compared to previous locking. - The TCP syncache still relies on the pcbinfo lock, something that we may want to revisit. - Support for reverting to the FreeBSD 7.x locking strategy in TCP input is no longer available -- hash lookup locks are now held only very briefly during inpcb lookup, rather than for potentially extended periods. However, the pcbinfo ipi_lock will still be acquired if a connection state might change such that a connection is added or removed. - Raw IP sockets continue to use the pcbinfo ipi_lock for protection, due to maintaining their own hash tables. - The interface in6_pcblookup_hash_locked() is maintained, which allows callers to acquire hash locks and perform one or more lookups atomically with 4-tuple allocation: this is required only for TCPv6, as there is no in6_pcbconnect_setup(), which there should be. - UDPv6 locking remains significantly more conservative than UDPv4 locking, which relates to source address selection. This needs attention, as it likely significantly reduces parallelism in this code for multithreaded socket use (such as in BIND). - In the UDPv4 and UDPv6 multicast cases, we need to revisit locking somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which is no longer sufficient. A second check once the inpcb lock is held should do the trick, keeping the general case from requiring the inpcb lock for every inpcb visited. - This work reminds us that we need to revisit locking of the v4/v6 flags, which may be accessed lock-free both before and after this change. - Right now, a single lock name is used for the pcbhash lock -- this is undesirable, and probably another argument is required to take care of this (or a char array name field in the pcbinfo?). This is not an MFC candidate for 8.x due to its impact on lookup and locking semantics. It's possible some of these issues could be worked around with compatibility wrappers, if necessary. Reviewed by: bz Sponsored by: Juniper Networks, Inc.
2011-05-30 09:43:55 +00:00
INP_HASH_WUNLOCK(&V_tcbinfo);
tp = intotcpcb(inp);
tp->t_state = TCPS_SYN_RECEIVED;
tp->iss = sc->sc_iss;
tp->irs = sc->sc_irs;
tcp_rcvseqinit(tp);
tcp_sendseqinit(tp);
tp->snd_wl1 = sc->sc_irs;
tp->snd_max = tp->iss + 1;
tp->snd_nxt = tp->iss + 1;
tp->rcv_up = sc->sc_irs + 1;
tp->rcv_wnd = sc->sc_wnd;
tp->rcv_adv += tp->rcv_wnd;
tp->last_ack_sent = tp->rcv_nxt;
tp->t_flags = sototcpcb(lso)->t_flags & (TF_NOPUSH|TF_NODELAY);
if (sc->sc_flags & SCF_NOOPT)
tp->t_flags |= TF_NOOPT;
else {
if (sc->sc_flags & SCF_WINSCALE) {
tp->t_flags |= TF_REQ_SCALE|TF_RCVD_SCALE;
tp->snd_scale = sc->sc_requested_s_scale;
tp->request_r_scale = sc->sc_requested_r_scale;
}
if (sc->sc_flags & SCF_TIMESTAMP) {
tp->t_flags |= TF_REQ_TSTMP|TF_RCVD_TSTMP;
tp->ts_recent = sc->sc_tsreflect;
tp->ts_recent_age = tcp_ts_getticks();
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
tp->ts_offset = sc->sc_tsoff;
}
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
#ifdef TCP_SIGNATURE
if (sc->sc_flags & SCF_SIGNATURE)
tp->t_flags |= TF_SIGNATURE;
2004-02-13 18:21:45 +00:00
#endif
if (sc->sc_flags & SCF_SACK)
tp->t_flags |= TF_SACK_PERMIT;
}
if (sc->sc_flags & SCF_ECN)
tp->t_flags |= TF_ECN_PERMIT;
/*
* Set up MSS and get cached values from tcp_hostcache.
* This might overwrite some of the defaults we just set.
*/
tcp_mss(tp, sc->sc_peer_mss);
/*
* If the SYN,ACK was retransmitted, indicate that CWND to be
* limited to one segment in cc_conn_init().
* NB: sc_rxmits counts all SYN,ACK transmits, not just retransmits.
*/
if (sc->sc_rxmits > 1)
tp->snd_cwnd = 1;
#ifdef TCP_OFFLOAD
/*
* Allow a TOE driver to install its hooks. Note that we hold the
* pcbinfo lock too and that prevents tcp_usr_accept from accepting a
* new connection before the TOE driver has done its thing.
*/
if (ADDED_BY_TOE(sc)) {
struct toedev *tod = sc->sc_tod;
tod->tod_offload_socket(tod, sc->sc_todctx, so);
}
#endif
/*
* Copy and activate timers.
*/
tp->t_keepinit = sototcpcb(lso)->t_keepinit;
tp->t_keepidle = sototcpcb(lso)->t_keepidle;
tp->t_keepintvl = sototcpcb(lso)->t_keepintvl;
tp->t_keepcnt = sototcpcb(lso)->t_keepcnt;
tcp_timer_activate(tp, TT_KEEP, TP_KEEPINIT(tp));
INP_WUNLOCK(inp);
TCPSTAT_INC(tcps_accepts);
return (so);
abort:
INP_WUNLOCK(inp);
abort2:
if (so != NULL)
soabort(so);
return (NULL);
}
/*
* This function gets called when we receive an ACK for a
* socket in the LISTEN state. We look up the connection
* in the syncache, and if its there, we pull it out of
* the cache and turn it into a full-blown connection in
* the SYN-RECEIVED state.
*/
int
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
syncache_expand(struct in_conninfo *inc, struct tcpopt *to, struct tcphdr *th,
struct socket **lsop, struct mbuf *m)
{
struct syncache *sc;
struct syncache_head *sch;
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
struct syncache scs;
char *s;
/*
* Global TCP locks are held because we manipulate the PCB lists
* and create a new socket.
*/
INP_INFO_WLOCK_ASSERT(&V_tcbinfo);
KASSERT((th->th_flags & (TH_RST|TH_ACK|TH_SYN)) == TH_ACK,
("%s: can handle only ACK", __func__));
sc = syncache_lookup(inc, &sch); /* returns locked sch */
SCH_LOCK_ASSERT(sch);
if (sc == NULL) {
/*
* There is no syncache entry, so see if this ACK is
* a returning syncookie. To do this, first:
* A. See if this socket has had a syncache entry dropped in
* the past. We don't want to accept a bogus syncookie
* if we've never received a SYN.
* B. check that the syncookie is valid. If it is, then
* cobble up a fake syncache entry, and return.
*/
if (!V_tcp_syncookies) {
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
SCH_UNLOCK(sch);
if ((s = tcp_log_addrs(inc, th, NULL, NULL)))
log(LOG_DEBUG, "%s; %s: Spurious ACK, "
"segment rejected (syncookies disabled)\n",
s, __func__);
goto failed;
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
}
bzero(&scs, sizeof(scs));
sc = syncookie_lookup(inc, sch, &scs, to, th, *lsop);
SCH_UNLOCK(sch);
if (sc == NULL) {
if ((s = tcp_log_addrs(inc, th, NULL, NULL)))
log(LOG_DEBUG, "%s; %s: Segment failed "
"SYNCOOKIE authentication, segment rejected "
"(probably spoofed)\n", s, __func__);
goto failed;
}
} else {
/* Pull out the entry to unlock the bucket row. */
TAILQ_REMOVE(&sch->sch_bucket, sc, sc_hash);
sch->sch_length--;
#ifdef TCP_OFFLOAD
if (ADDED_BY_TOE(sc)) {
struct toedev *tod = sc->sc_tod;
tod->tod_syncache_removed(tod, sc->sc_todctx);
}
#endif
SCH_UNLOCK(sch);
}
/*
* Segment validation:
* ACK must match our initial sequence number + 1 (the SYN|ACK).
*/
if (th->th_ack != sc->sc_iss + 1) {
if ((s = tcp_log_addrs(inc, th, NULL, NULL)))
log(LOG_DEBUG, "%s; %s: ACK %u != ISS+1 %u, segment "
"rejected\n", s, __func__, th->th_ack, sc->sc_iss);
goto failed;
}
2008-08-05 21:59:20 +00:00
/*
2008-08-05 21:59:20 +00:00
* The SEQ must fall in the window starting at the received
* initial receive sequence number + 1 (the SYN).
*/
if (SEQ_LEQ(th->th_seq, sc->sc_irs) ||
SEQ_GT(th->th_seq, sc->sc_irs + sc->sc_wnd)) {
if ((s = tcp_log_addrs(inc, th, NULL, NULL)))
log(LOG_DEBUG, "%s; %s: SEQ %u != IRS+1 %u, segment "
"rejected\n", s, __func__, th->th_seq, sc->sc_irs);
goto failed;
}
if (!(sc->sc_flags & SCF_TIMESTAMP) && (to->to_flags & TOF_TS)) {
if ((s = tcp_log_addrs(inc, th, NULL, NULL)))
log(LOG_DEBUG, "%s; %s: Timestamp not expected, "
"segment rejected\n", s, __func__);
goto failed;
}
/*
* If timestamps were negotiated the reflected timestamp
* must be equal to what we actually sent in the SYN|ACK.
*/
if ((to->to_flags & TOF_TS) && to->to_tsecr != sc->sc_ts) {
if ((s = tcp_log_addrs(inc, th, NULL, NULL)))
log(LOG_DEBUG, "%s; %s: TSECR %u != TS %u, "
"segment rejected\n",
s, __func__, to->to_tsecr, sc->sc_ts);
goto failed;
}
*lsop = syncache_socket(sc, *lsop, m);
if (*lsop == NULL)
TCPSTAT_INC(tcps_sc_aborted);
else
TCPSTAT_INC(tcps_sc_completed);
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
/* how do we find the inp for the new socket? */
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
if (sc != &scs)
syncache_free(sc);
return (1);
failed:
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
if (sc != NULL && sc != &scs)
syncache_free(sc);
if (s != NULL)
free(s, M_TCPLOG);
*lsop = NULL;
return (0);
}
/*
* Given a LISTEN socket and an inbound SYN request, add
* this to the syn cache, and send back a segment:
* <SEQ=ISS><ACK=RCV_NXT><CTL=SYN,ACK>
* to the source.
*
* IMPORTANT NOTE: We do _NOT_ ACK data that might accompany the SYN.
* Doing so would require that we hold onto the data and deliver it
* to the application. However, if we are the target of a SYN-flood
* DoS attack, an attacker could send data which would eventually
* consume all available buffer space if it were ACKed. By not ACKing
* the data, we avoid this DoS scenario.
*/
void
syncache_add(struct in_conninfo *inc, struct tcpopt *to, struct tcphdr *th,
struct inpcb *inp, struct socket **lsop, struct mbuf *m, void *tod,
void *todctx)
{
struct tcpcb *tp;
struct socket *so;
struct syncache *sc = NULL;
struct syncache_head *sch;
struct mbuf *ipopts = NULL;
u_int32_t flowtmp;
u_int ltflags;
int win, sb_hiwat, ip_ttl, ip_tos;
char *s;
#ifdef INET6
int autoflowlabel = 0;
Fix LOR between the syncache and inpcb locks when MAC is present in the kernel. This LOR snuck in with some of the recent syncache changes. To fix this, the inpcb handling was changed: - Hang a MAC label off the syncache object - When the syncache entry is initially created, we pickup the PCB lock is held because we extract information from it while initializing the syncache entry. While we do this, copy the MAC label associated with the PCB and use it for the syncache entry. - When the packet is transmitted, copy the label from the syncache entry to the mbuf so it can be processed by security policies which analyze mbuf labels. This change required that the MAC framework be extended to support the label copy operations from the PCB to the syncache entry, and then from the syncache entry to the mbuf. These functions really should be referencing the syncache structure instead of the label. However, due to some of the complexities associated with exposing this syncache structure we operate directly on it's label pointer. This should be OK since we aren't making any access control decisions within this code directly, we are merely allocating and copying label storage so we can properly initialize mbuf labels for any packets the syncache code might create. This also has a nice side effect of caching. Prior to this change, the PCB would be looked up/locked for each packet transmitted. Now the label is cached at the time the syncache entry is initialized. Submitted by: andre [1] Discussed with: rwatson [1] andre submitted the tcp_syncache.c changes
2006-12-13 06:00:57 +00:00
#endif
#ifdef MAC
struct label *maclabel;
#endif
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
struct syncache scs;
struct ucred *cred;
INP_INFO_WLOCK_ASSERT(&V_tcbinfo);
INP_WLOCK_ASSERT(inp); /* listen socket */
KASSERT((th->th_flags & (TH_RST|TH_ACK|TH_SYN)) == TH_SYN,
("%s: unexpected tcp flags", __func__));
/*
* Combine all so/tp operations very early to drop the INP lock as
* soon as possible.
*/
so = *lsop;
tp = sototcpcb(so);
cred = crhold(so->so_cred);
#ifdef INET6
if ((inc->inc_flags & INC_ISIPV6) &&
(inp->inp_flags & IN6P_AUTOFLOWLABEL))
autoflowlabel = 1;
#endif
ip_ttl = inp->inp_ip_ttl;
ip_tos = inp->inp_ip_tos;
win = sbspace(&so->so_rcv);
sb_hiwat = so->so_rcv.sb_hiwat;
ltflags = (tp->t_flags & (TF_NOOPT | TF_SIGNATURE));
/* By the time we drop the lock these should no longer be used. */
so = NULL;
tp = NULL;
Fix LOR between the syncache and inpcb locks when MAC is present in the kernel. This LOR snuck in with some of the recent syncache changes. To fix this, the inpcb handling was changed: - Hang a MAC label off the syncache object - When the syncache entry is initially created, we pickup the PCB lock is held because we extract information from it while initializing the syncache entry. While we do this, copy the MAC label associated with the PCB and use it for the syncache entry. - When the packet is transmitted, copy the label from the syncache entry to the mbuf so it can be processed by security policies which analyze mbuf labels. This change required that the MAC framework be extended to support the label copy operations from the PCB to the syncache entry, and then from the syncache entry to the mbuf. These functions really should be referencing the syncache structure instead of the label. However, due to some of the complexities associated with exposing this syncache structure we operate directly on it's label pointer. This should be OK since we aren't making any access control decisions within this code directly, we are merely allocating and copying label storage so we can properly initialize mbuf labels for any packets the syncache code might create. This also has a nice side effect of caching. Prior to this change, the PCB would be looked up/locked for each packet transmitted. Now the label is cached at the time the syncache entry is initialized. Submitted by: andre [1] Discussed with: rwatson [1] andre submitted the tcp_syncache.c changes
2006-12-13 06:00:57 +00:00
#ifdef MAC
if (mac_syncache_init(&maclabel) != 0) {
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_tcbinfo);
goto done;
Fix LOR between the syncache and inpcb locks when MAC is present in the kernel. This LOR snuck in with some of the recent syncache changes. To fix this, the inpcb handling was changed: - Hang a MAC label off the syncache object - When the syncache entry is initially created, we pickup the PCB lock is held because we extract information from it while initializing the syncache entry. While we do this, copy the MAC label associated with the PCB and use it for the syncache entry. - When the packet is transmitted, copy the label from the syncache entry to the mbuf so it can be processed by security policies which analyze mbuf labels. This change required that the MAC framework be extended to support the label copy operations from the PCB to the syncache entry, and then from the syncache entry to the mbuf. These functions really should be referencing the syncache structure instead of the label. However, due to some of the complexities associated with exposing this syncache structure we operate directly on it's label pointer. This should be OK since we aren't making any access control decisions within this code directly, we are merely allocating and copying label storage so we can properly initialize mbuf labels for any packets the syncache code might create. This also has a nice side effect of caching. Prior to this change, the PCB would be looked up/locked for each packet transmitted. Now the label is cached at the time the syncache entry is initialized. Submitted by: andre [1] Discussed with: rwatson [1] andre submitted the tcp_syncache.c changes
2006-12-13 06:00:57 +00:00
} else
mac_syncache_create(maclabel, inp);
Fix LOR between the syncache and inpcb locks when MAC is present in the kernel. This LOR snuck in with some of the recent syncache changes. To fix this, the inpcb handling was changed: - Hang a MAC label off the syncache object - When the syncache entry is initially created, we pickup the PCB lock is held because we extract information from it while initializing the syncache entry. While we do this, copy the MAC label associated with the PCB and use it for the syncache entry. - When the packet is transmitted, copy the label from the syncache entry to the mbuf so it can be processed by security policies which analyze mbuf labels. This change required that the MAC framework be extended to support the label copy operations from the PCB to the syncache entry, and then from the syncache entry to the mbuf. These functions really should be referencing the syncache structure instead of the label. However, due to some of the complexities associated with exposing this syncache structure we operate directly on it's label pointer. This should be OK since we aren't making any access control decisions within this code directly, we are merely allocating and copying label storage so we can properly initialize mbuf labels for any packets the syncache code might create. This also has a nice side effect of caching. Prior to this change, the PCB would be looked up/locked for each packet transmitted. Now the label is cached at the time the syncache entry is initialized. Submitted by: andre [1] Discussed with: rwatson [1] andre submitted the tcp_syncache.c changes
2006-12-13 06:00:57 +00:00
#endif
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_tcbinfo);
/*
* Remember the IP options, if any.
*/
#ifdef INET6
if (!(inc->inc_flags & INC_ISIPV6))
#endif
#ifdef INET
ipopts = (m) ? ip_srcroute(m) : NULL;
#else
ipopts = NULL;
#endif
/*
* See if we already have an entry for this connection.
* If we do, resend the SYN,ACK, and reset the retransmit timer.
*
* XXX: should the syncache be re-initialized with the contents
* of the new SYN here (which may have different options?)
*
* XXX: We do not check the sequence number to see if this is a
* real retransmit or a new connection attempt. The question is
* how to handle such a case; either ignore it as spoofed, or
* drop the current entry and create a new one?
*/
sc = syncache_lookup(inc, &sch); /* returns locked entry */
SCH_LOCK_ASSERT(sch);
if (sc != NULL) {
TCPSTAT_INC(tcps_sc_dupsyn);
if (ipopts) {
/*
* If we were remembering a previous source route,
* forget it and use the new one we've been given.
*/
if (sc->sc_ipopts)
(void) m_free(sc->sc_ipopts);
sc->sc_ipopts = ipopts;
}
/*
* Update timestamp if present.
*/
if ((sc->sc_flags & SCF_TIMESTAMP) && (to->to_flags & TOF_TS))
sc->sc_tsreflect = to->to_tsval;
else
sc->sc_flags &= ~SCF_TIMESTAMP;
Fix LOR between the syncache and inpcb locks when MAC is present in the kernel. This LOR snuck in with some of the recent syncache changes. To fix this, the inpcb handling was changed: - Hang a MAC label off the syncache object - When the syncache entry is initially created, we pickup the PCB lock is held because we extract information from it while initializing the syncache entry. While we do this, copy the MAC label associated with the PCB and use it for the syncache entry. - When the packet is transmitted, copy the label from the syncache entry to the mbuf so it can be processed by security policies which analyze mbuf labels. This change required that the MAC framework be extended to support the label copy operations from the PCB to the syncache entry, and then from the syncache entry to the mbuf. These functions really should be referencing the syncache structure instead of the label. However, due to some of the complexities associated with exposing this syncache structure we operate directly on it's label pointer. This should be OK since we aren't making any access control decisions within this code directly, we are merely allocating and copying label storage so we can properly initialize mbuf labels for any packets the syncache code might create. This also has a nice side effect of caching. Prior to this change, the PCB would be looked up/locked for each packet transmitted. Now the label is cached at the time the syncache entry is initialized. Submitted by: andre [1] Discussed with: rwatson [1] andre submitted the tcp_syncache.c changes
2006-12-13 06:00:57 +00:00
#ifdef MAC
/*
* Since we have already unconditionally allocated label
* storage, free it up. The syncache entry will already
* have an initialized label we can use.
*/
mac_syncache_destroy(&maclabel);
Fix LOR between the syncache and inpcb locks when MAC is present in the kernel. This LOR snuck in with some of the recent syncache changes. To fix this, the inpcb handling was changed: - Hang a MAC label off the syncache object - When the syncache entry is initially created, we pickup the PCB lock is held because we extract information from it while initializing the syncache entry. While we do this, copy the MAC label associated with the PCB and use it for the syncache entry. - When the packet is transmitted, copy the label from the syncache entry to the mbuf so it can be processed by security policies which analyze mbuf labels. This change required that the MAC framework be extended to support the label copy operations from the PCB to the syncache entry, and then from the syncache entry to the mbuf. These functions really should be referencing the syncache structure instead of the label. However, due to some of the complexities associated with exposing this syncache structure we operate directly on it's label pointer. This should be OK since we aren't making any access control decisions within this code directly, we are merely allocating and copying label storage so we can properly initialize mbuf labels for any packets the syncache code might create. This also has a nice side effect of caching. Prior to this change, the PCB would be looked up/locked for each packet transmitted. Now the label is cached at the time the syncache entry is initialized. Submitted by: andre [1] Discussed with: rwatson [1] andre submitted the tcp_syncache.c changes
2006-12-13 06:00:57 +00:00
#endif
/* Retransmit SYN|ACK and reset retransmit count. */
if ((s = tcp_log_addrs(&sc->sc_inc, th, NULL, NULL))) {
log(LOG_DEBUG, "%s; %s: Received duplicate SYN, "
"resetting timer and retransmitting SYN|ACK\n",
s, __func__);
free(s, M_TCPLOG);
}
if (syncache_respond(sc) == 0) {
sc->sc_rxmits = 0;
syncache_timeout(sc, sch, 1);
TCPSTAT_INC(tcps_sndacks);
TCPSTAT_INC(tcps_sndtotal);
}
SCH_UNLOCK(sch);
goto done;
}
sc = uma_zalloc(V_tcp_syncache.zone, M_NOWAIT | M_ZERO);
if (sc == NULL) {
/*
* The zone allocator couldn't provide more entries.
* Treat this as if the cache was full; drop the oldest
* entry and insert the new one.
*/
TCPSTAT_INC(tcps_sc_zonefail);
if ((sc = TAILQ_LAST(&sch->sch_bucket, sch_head)) != NULL)
syncache_drop(sc, sch);
sc = uma_zalloc(V_tcp_syncache.zone, M_NOWAIT | M_ZERO);
if (sc == NULL) {
if (V_tcp_syncookies) {
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
bzero(&scs, sizeof(scs));
sc = &scs;
} else {
SCH_UNLOCK(sch);
if (ipopts)
(void) m_free(ipopts);
goto done;
}
}
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
}
/*
* Fill in the syncache values.
*/
Fix LOR between the syncache and inpcb locks when MAC is present in the kernel. This LOR snuck in with some of the recent syncache changes. To fix this, the inpcb handling was changed: - Hang a MAC label off the syncache object - When the syncache entry is initially created, we pickup the PCB lock is held because we extract information from it while initializing the syncache entry. While we do this, copy the MAC label associated with the PCB and use it for the syncache entry. - When the packet is transmitted, copy the label from the syncache entry to the mbuf so it can be processed by security policies which analyze mbuf labels. This change required that the MAC framework be extended to support the label copy operations from the PCB to the syncache entry, and then from the syncache entry to the mbuf. These functions really should be referencing the syncache structure instead of the label. However, due to some of the complexities associated with exposing this syncache structure we operate directly on it's label pointer. This should be OK since we aren't making any access control decisions within this code directly, we are merely allocating and copying label storage so we can properly initialize mbuf labels for any packets the syncache code might create. This also has a nice side effect of caching. Prior to this change, the PCB would be looked up/locked for each packet transmitted. Now the label is cached at the time the syncache entry is initialized. Submitted by: andre [1] Discussed with: rwatson [1] andre submitted the tcp_syncache.c changes
2006-12-13 06:00:57 +00:00
#ifdef MAC
sc->sc_label = maclabel;
#endif
sc->sc_cred = cred;
cred = NULL;
sc->sc_ipopts = ipopts;
bcopy(inc, &sc->sc_inc, sizeof(struct in_conninfo));
#ifdef INET6
if (!(inc->inc_flags & INC_ISIPV6))
#endif
{
sc->sc_ip_tos = ip_tos;
sc->sc_ip_ttl = ip_ttl;
}
#ifdef TCP_OFFLOAD
sc->sc_tod = tod;
sc->sc_todctx = todctx;
#endif
sc->sc_irs = th->th_seq;
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
sc->sc_iss = arc4random();
sc->sc_flags = 0;
sc->sc_flowlabel = 0;
/*
* Initial receive window: clip sbspace to [0 .. TCP_MAXWIN].
* win was derived from socket earlier in the function.
*/
win = imax(win, 0);
win = imin(win, TCP_MAXWIN);
sc->sc_wnd = win;
if (V_tcp_do_rfc1323) {
/*
* A timestamp received in a SYN makes
* it ok to send timestamp requests and replies.
*/
if (to->to_flags & TOF_TS) {
sc->sc_tsreflect = to->to_tsval;
sc->sc_ts = tcp_ts_getticks();
sc->sc_flags |= SCF_TIMESTAMP;
}
if (to->to_flags & TOF_SCALE) {
int wscale = 0;
/*
* Pick the smallest possible scaling factor that
* will still allow us to scale up to sb_max, aka
* kern.ipc.maxsockbuf.
*
* We do this because there are broken firewalls that
* will corrupt the window scale option, leading to
* the other endpoint believing that our advertised
* window is unscaled. At scale factors larger than
* 5 the unscaled window will drop below 1500 bytes,
* leading to serious problems when traversing these
* broken firewalls.
*
* With the default maxsockbuf of 256K, a scale factor
* of 3 will be chosen by this algorithm. Those who
* choose a larger maxsockbuf should watch out
* for the compatiblity problems mentioned above.
*
* RFC1323: The Window field in a SYN (i.e., a <SYN>
* or <SYN,ACK>) segment itself is never scaled.
*/
while (wscale < TCP_MAX_WINSHIFT &&
(TCP_MAXWIN << wscale) < sb_max)
wscale++;
sc->sc_requested_r_scale = wscale;
sc->sc_requested_s_scale = to->to_wscale;
sc->sc_flags |= SCF_WINSCALE;
}
}
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
#ifdef TCP_SIGNATURE
/*
* If listening socket requested TCP digests, and received SYN
* contains the option, flag this in the syncache so that
* syncache_respond() will do the right thing with the SYN+ACK.
* XXX: Currently we always record the option by default and will
* attempt to use it in syncache_respond().
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
*/
if (to->to_flags & TOF_SIGNATURE || ltflags & TF_SIGNATURE)
sc->sc_flags |= SCF_SIGNATURE;
2004-02-13 18:21:45 +00:00
#endif
if (to->to_flags & TOF_SACKPERM)
sc->sc_flags |= SCF_SACK;
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
if (to->to_flags & TOF_MSS)
sc->sc_peer_mss = to->to_mss; /* peer mss may be zero */
if (ltflags & TF_NOOPT)
sc->sc_flags |= SCF_NOOPT;
if ((th->th_flags & (TH_ECE|TH_CWR)) && V_tcp_do_ecn)
sc->sc_flags |= SCF_ECN;
if (V_tcp_syncookies) {
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
syncookie_generate(sch, sc, &flowtmp);
#ifdef INET6
if (autoflowlabel)
sc->sc_flowlabel = flowtmp;
#endif
} else {
#ifdef INET6
if (autoflowlabel)
sc->sc_flowlabel =
(htonl(ip6_randomflowlabel()) & IPV6_FLOWLABEL_MASK);
#endif
}
SCH_UNLOCK(sch);
/*
* Do a standard 3-way handshake.
*/
if (syncache_respond(sc) == 0) {
if (V_tcp_syncookies && V_tcp_syncookiesonly && sc != &scs)
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
syncache_free(sc);
else if (sc != &scs)
syncache_insert(sc, sch); /* locks and unlocks sch */
TCPSTAT_INC(tcps_sndacks);
TCPSTAT_INC(tcps_sndtotal);
} else {
Fix LOR between the syncache and inpcb locks when MAC is present in the kernel. This LOR snuck in with some of the recent syncache changes. To fix this, the inpcb handling was changed: - Hang a MAC label off the syncache object - When the syncache entry is initially created, we pickup the PCB lock is held because we extract information from it while initializing the syncache entry. While we do this, copy the MAC label associated with the PCB and use it for the syncache entry. - When the packet is transmitted, copy the label from the syncache entry to the mbuf so it can be processed by security policies which analyze mbuf labels. This change required that the MAC framework be extended to support the label copy operations from the PCB to the syncache entry, and then from the syncache entry to the mbuf. These functions really should be referencing the syncache structure instead of the label. However, due to some of the complexities associated with exposing this syncache structure we operate directly on it's label pointer. This should be OK since we aren't making any access control decisions within this code directly, we are merely allocating and copying label storage so we can properly initialize mbuf labels for any packets the syncache code might create. This also has a nice side effect of caching. Prior to this change, the PCB would be looked up/locked for each packet transmitted. Now the label is cached at the time the syncache entry is initialized. Submitted by: andre [1] Discussed with: rwatson [1] andre submitted the tcp_syncache.c changes
2006-12-13 06:00:57 +00:00
if (sc != &scs)
syncache_free(sc);
TCPSTAT_INC(tcps_sc_dropped);
}
done:
if (cred != NULL)
crfree(cred);
#ifdef MAC
if (sc == &scs)
mac_syncache_destroy(&maclabel);
#endif
if (m) {
*lsop = NULL;
m_freem(m);
}
}
static int
syncache_respond(struct syncache *sc)
{
struct ip *ip = NULL;
struct mbuf *m;
struct tcphdr *th = NULL;
int optlen, error = 0; /* Make compiler happy */
u_int16_t hlen, tlen, mssopt;
struct tcpopt to;
#ifdef INET6
struct ip6_hdr *ip6 = NULL;
#endif
hlen =
#ifdef INET6
(sc->sc_inc.inc_flags & INC_ISIPV6) ? sizeof(struct ip6_hdr) :
#endif
sizeof(struct ip);
tlen = hlen + sizeof(struct tcphdr);
/* Determine MSS we advertize to other end of connection. */
mssopt = tcp_mssopt(&sc->sc_inc);
if (sc->sc_peer_mss)
mssopt = max( min(sc->sc_peer_mss, mssopt), V_tcp_minmss);
/* XXX: Assume that the entire packet will fit in a header mbuf. */
KASSERT(max_linkhdr + tlen + TCP_MAXOLEN <= MHLEN,
("syncache: mbuf too small"));
/* Create the IP+TCP header from scratch. */
m = m_gethdr(M_NOWAIT, MT_DATA);
if (m == NULL)
return (ENOBUFS);
Fix LOR between the syncache and inpcb locks when MAC is present in the kernel. This LOR snuck in with some of the recent syncache changes. To fix this, the inpcb handling was changed: - Hang a MAC label off the syncache object - When the syncache entry is initially created, we pickup the PCB lock is held because we extract information from it while initializing the syncache entry. While we do this, copy the MAC label associated with the PCB and use it for the syncache entry. - When the packet is transmitted, copy the label from the syncache entry to the mbuf so it can be processed by security policies which analyze mbuf labels. This change required that the MAC framework be extended to support the label copy operations from the PCB to the syncache entry, and then from the syncache entry to the mbuf. These functions really should be referencing the syncache structure instead of the label. However, due to some of the complexities associated with exposing this syncache structure we operate directly on it's label pointer. This should be OK since we aren't making any access control decisions within this code directly, we are merely allocating and copying label storage so we can properly initialize mbuf labels for any packets the syncache code might create. This also has a nice side effect of caching. Prior to this change, the PCB would be looked up/locked for each packet transmitted. Now the label is cached at the time the syncache entry is initialized. Submitted by: andre [1] Discussed with: rwatson [1] andre submitted the tcp_syncache.c changes
2006-12-13 06:00:57 +00:00
#ifdef MAC
mac_syncache_create_mbuf(sc->sc_label, m);
Fix LOR between the syncache and inpcb locks when MAC is present in the kernel. This LOR snuck in with some of the recent syncache changes. To fix this, the inpcb handling was changed: - Hang a MAC label off the syncache object - When the syncache entry is initially created, we pickup the PCB lock is held because we extract information from it while initializing the syncache entry. While we do this, copy the MAC label associated with the PCB and use it for the syncache entry. - When the packet is transmitted, copy the label from the syncache entry to the mbuf so it can be processed by security policies which analyze mbuf labels. This change required that the MAC framework be extended to support the label copy operations from the PCB to the syncache entry, and then from the syncache entry to the mbuf. These functions really should be referencing the syncache structure instead of the label. However, due to some of the complexities associated with exposing this syncache structure we operate directly on it's label pointer. This should be OK since we aren't making any access control decisions within this code directly, we are merely allocating and copying label storage so we can properly initialize mbuf labels for any packets the syncache code might create. This also has a nice side effect of caching. Prior to this change, the PCB would be looked up/locked for each packet transmitted. Now the label is cached at the time the syncache entry is initialized. Submitted by: andre [1] Discussed with: rwatson [1] andre submitted the tcp_syncache.c changes
2006-12-13 06:00:57 +00:00
#endif
m->m_data += max_linkhdr;
m->m_len = tlen;
m->m_pkthdr.len = tlen;
m->m_pkthdr.rcvif = NULL;
#ifdef INET6
if (sc->sc_inc.inc_flags & INC_ISIPV6) {
ip6 = mtod(m, struct ip6_hdr *);
ip6->ip6_vfc = IPV6_VERSION;
ip6->ip6_nxt = IPPROTO_TCP;
ip6->ip6_src = sc->sc_inc.inc6_laddr;
ip6->ip6_dst = sc->sc_inc.inc6_faddr;
ip6->ip6_plen = htons(tlen - hlen);
/* ip6_hlim is set after checksum */
ip6->ip6_flow &= ~IPV6_FLOWLABEL_MASK;
ip6->ip6_flow |= sc->sc_flowlabel;
th = (struct tcphdr *)(ip6 + 1);
}
#endif
#if defined(INET6) && defined(INET)
else
#endif
#ifdef INET
{
ip = mtod(m, struct ip *);
ip->ip_v = IPVERSION;
ip->ip_hl = sizeof(struct ip) >> 2;
ip->ip_len = htons(tlen);
ip->ip_id = 0;
ip->ip_off = 0;
ip->ip_sum = 0;
ip->ip_p = IPPROTO_TCP;
ip->ip_src = sc->sc_inc.inc_laddr;
ip->ip_dst = sc->sc_inc.inc_faddr;
ip->ip_ttl = sc->sc_ip_ttl;
ip->ip_tos = sc->sc_ip_tos;
/*
* See if we should do MTU discovery. Route lookups are
* expensive, so we will only unset the DF bit if:
*
* 1) path_mtu_discovery is disabled
* 2) the SCF_UNREACH flag has been set
*/
if (V_path_mtu_discovery && ((sc->sc_flags & SCF_UNREACH) == 0))
ip->ip_off |= htons(IP_DF);
th = (struct tcphdr *)(ip + 1);
}
#endif /* INET */
th->th_sport = sc->sc_inc.inc_lport;
th->th_dport = sc->sc_inc.inc_fport;
th->th_seq = htonl(sc->sc_iss);
th->th_ack = htonl(sc->sc_irs + 1);
th->th_off = sizeof(struct tcphdr) >> 2;
th->th_x2 = 0;
th->th_flags = TH_SYN|TH_ACK;
th->th_win = htons(sc->sc_wnd);
th->th_urp = 0;
if (sc->sc_flags & SCF_ECN) {
th->th_flags |= TH_ECE;
TCPSTAT_INC(tcps_ecn_shs);
}
/* Tack on the TCP options. */
if ((sc->sc_flags & SCF_NOOPT) == 0) {
to.to_flags = 0;
to.to_mss = mssopt;
to.to_flags = TOF_MSS;
if (sc->sc_flags & SCF_WINSCALE) {
to.to_wscale = sc->sc_requested_r_scale;
to.to_flags |= TOF_SCALE;
}
if (sc->sc_flags & SCF_TIMESTAMP) {
/* Virgin timestamp or TCP cookie enhanced one. */
to.to_tsval = sc->sc_ts;
to.to_tsecr = sc->sc_tsreflect;
to.to_flags |= TOF_TS;
}
if (sc->sc_flags & SCF_SACK)
to.to_flags |= TOF_SACKPERM;
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
#ifdef TCP_SIGNATURE
if (sc->sc_flags & SCF_SIGNATURE)
to.to_flags |= TOF_SIGNATURE;
#endif
optlen = tcp_addoptions(&to, (u_char *)(th + 1));
/* Adjust headers by option size. */
th->th_off = (sizeof(struct tcphdr) + optlen) >> 2;
m->m_len += optlen;
m->m_pkthdr.len += optlen;
#ifdef TCP_SIGNATURE
if (sc->sc_flags & SCF_SIGNATURE)
tcp_signature_compute(m, 0, 0, optlen,
to.to_signature, IPSEC_DIR_OUTBOUND);
#endif
#ifdef INET6
if (sc->sc_inc.inc_flags & INC_ISIPV6)
ip6->ip6_plen = htons(ntohs(ip6->ip6_plen) + optlen);
else
#endif
ip->ip_len = htons(ntohs(ip->ip_len) + optlen);
} else
optlen = 0;
M_SETFIB(m, sc->sc_inc.inc_fibnum);
m->m_pkthdr.csum_data = offsetof(struct tcphdr, th_sum);
#ifdef INET6
if (sc->sc_inc.inc_flags & INC_ISIPV6) {
m->m_pkthdr.csum_flags = CSUM_TCP_IPV6;
th->th_sum = in6_cksum_pseudo(ip6, tlen + optlen - hlen,
IPPROTO_TCP, 0);
ip6->ip6_hlim = in6_selecthlim(NULL, NULL);
#ifdef TCP_OFFLOAD
if (ADDED_BY_TOE(sc)) {
struct toedev *tod = sc->sc_tod;
error = tod->tod_syncache_respond(tod, sc->sc_todctx, m);
return (error);
}
#endif
error = ip6_output(m, NULL, NULL, 0, NULL, NULL, NULL);
}
#endif
#if defined(INET6) && defined(INET)
else
#endif
#ifdef INET
{
m->m_pkthdr.csum_flags = CSUM_TCP;
th->th_sum = in_pseudo(ip->ip_src.s_addr, ip->ip_dst.s_addr,
htons(tlen + optlen - hlen + IPPROTO_TCP));
#ifdef TCP_OFFLOAD
if (ADDED_BY_TOE(sc)) {
struct toedev *tod = sc->sc_tod;
error = tod->tod_syncache_respond(tod, sc->sc_todctx, m);
return (error);
}
#endif
error = ip_output(m, sc->sc_ipopts, NULL, 0, NULL, NULL);
}
#endif
return (error);
}
/*
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
* The purpose of SYN cookies is to avoid keeping track of all SYN's we
* receive and to be able to handle SYN floods from bogus source addresses
* (where we will never receive any reply). SYN floods try to exhaust all
* our memory and available slots in the SYN cache table to cause a denial
* of service to legitimate users of the local host.
*
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
* The idea of SYN cookies is to encode and include all necessary information
* about the connection setup state within the SYN-ACK we send back and thus
* to get along without keeping any local state until the ACK to the SYN-ACK
* arrives (if ever). Everything we need to know should be available from
* the information we encoded in the SYN-ACK.
*
* More information about the theory behind SYN cookies and its first
* discussion and specification can be found at:
* http://cr.yp.to/syncookies.html (overview)
* http://cr.yp.to/syncookies/archive (gory details)
*
* This implementation extends the orginal idea and first implementation
* of FreeBSD by using not only the initial sequence number field to store
* information but also the timestamp field if present. This way we can
* keep track of the entire state we need to know to recreate the session in
* its original form. Almost all TCP speakers implement RFC1323 timestamps
* these days. For those that do not we still have to live with the known
* shortcomings of the ISN only SYN cookies.
*
* Cookie layers:
*
* Initial sequence number we send:
* 31|................................|0
* DDDDDDDDDDDDDDDDDDDDDDDDDMMMRRRP
* D = MD5 Digest (first dword)
* M = MSS index
* R = Rotation of secret
* P = Odd or Even secret
*
* The MD5 Digest is computed with over following parameters:
* a) randomly rotated secret
* b) struct in_conninfo containing the remote/local ip/port (IPv4&IPv6)
* c) the received initial sequence number from remote host
* d) the rotation offset and odd/even bit
*
* Timestamp we send:
* 31|................................|0
* DDDDDDDDDDDDDDDDDDDDDDSSSSRRRRA5
* D = MD5 Digest (third dword) (only as filler)
* S = Requested send window scale
* R = Requested receive window scale
* A = SACK allowed
* 5 = TCP-MD5 enabled (not implemented yet)
* XORed with MD5 Digest (forth dword)
*
* The timestamp isn't cryptographically secure and doesn't need to be.
* The double use of the MD5 digest dwords ties it to a specific remote/
* local host/port, remote initial sequence number and our local time
* limited secret. A received timestamp is reverted (XORed) and then
* the contained MD5 dword is compared to the computed one to ensure the
* timestamp belongs to the SYN-ACK we sent. The other parameters may
* have been tampered with but this isn't different from supplying bogus
* values in the SYN in the first place.
*
* Some problems with SYN cookies remain however:
* Consider the problem of a recreated (and retransmitted) cookie. If the
* original SYN was accepted, the connection is established. The second
* SYN is inflight, and if it arrives with an ISN that falls within the
* receive window, the connection is killed.
*
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
* Notes:
* A heuristic to determine when to accept syn cookies is not necessary.
* An ACK flood would cause the syncookie verification to be attempted,
* but a SYN flood causes syncookies to be generated. Both are of equal
* cost, so there's no point in trying to optimize the ACK flood case.
* Also, if you don't process certain ACKs for some reason, then all someone
* would have to do is launch a SYN and ACK flood at the same time, which
* would stop cookie verification and defeat the entire purpose of syncookies.
*/
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
static int tcp_sc_msstab[] = { 0, 256, 468, 536, 996, 1452, 1460, 8960 };
static void
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
syncookie_generate(struct syncache_head *sch, struct syncache *sc,
u_int32_t *flowlabel)
{
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
MD5_CTX ctx;
u_int32_t md5_buffer[MD5_DIGEST_LENGTH / sizeof(u_int32_t)];
u_int32_t data;
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
u_int32_t *secbits;
u_int off, pmss, mss;
int i;
SCH_LOCK_ASSERT(sch);
/* Which of the two secrets to use. */
secbits = sch->sch_oddeven ?
sch->sch_secbits_odd : sch->sch_secbits_even;
/* Reseed secret if too old. */
if (sch->sch_reseed < time_uptime) {
sch->sch_oddeven = sch->sch_oddeven ? 0 : 1; /* toggle */
secbits = sch->sch_oddeven ?
sch->sch_secbits_odd : sch->sch_secbits_even;
for (i = 0; i < SYNCOOKIE_SECRET_SIZE; i++)
secbits[i] = arc4random();
sch->sch_reseed = time_uptime + SYNCOOKIE_LIFETIME;
}
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
/* Secret rotation offset. */
off = sc->sc_iss & 0x7; /* iss was randomized before */
/* Maximum segment size calculation. */
pmss =
max( min(sc->sc_peer_mss, tcp_mssopt(&sc->sc_inc)), V_tcp_minmss);
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
for (mss = sizeof(tcp_sc_msstab) / sizeof(int) - 1; mss > 0; mss--)
if (tcp_sc_msstab[mss] <= pmss)
break;
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
/* Fold parameters and MD5 digest into the ISN we will send. */
data = sch->sch_oddeven;/* odd or even secret, 1 bit */
data |= off << 1; /* secret offset, derived from iss, 3 bits */
data |= mss << 4; /* mss, 3 bits */
MD5Init(&ctx);
MD5Update(&ctx, ((u_int8_t *)secbits) + off,
SYNCOOKIE_SECRET_SIZE * sizeof(*secbits) - off);
MD5Update(&ctx, secbits, off);
MD5Update(&ctx, &sc->sc_inc, sizeof(sc->sc_inc));
MD5Update(&ctx, &sc->sc_irs, sizeof(sc->sc_irs));
MD5Update(&ctx, &data, sizeof(data));
MD5Final((u_int8_t *)&md5_buffer, &ctx);
data |= (md5_buffer[0] << 7);
sc->sc_iss = data;
#ifdef INET6
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
*flowlabel = md5_buffer[1] & IPV6_FLOWLABEL_MASK;
#endif
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
/* Additional parameters are stored in the timestamp if present. */
if (sc->sc_flags & SCF_TIMESTAMP) {
data = ((sc->sc_flags & SCF_SIGNATURE) ? 1 : 0); /* TCP-MD5, 1 bit */
data |= ((sc->sc_flags & SCF_SACK) ? 1 : 0) << 1; /* SACK, 1 bit */
data |= sc->sc_requested_s_scale << 2; /* SWIN scale, 4 bits */
data |= sc->sc_requested_r_scale << 6; /* RWIN scale, 4 bits */
data |= md5_buffer[2] << 10; /* more digest bits */
data ^= md5_buffer[3];
sc->sc_ts = data;
sc->sc_tsoff = data - tcp_ts_getticks(); /* after XOR */
}
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
TCPSTAT_INC(tcps_sc_sendcookie);
}
static struct syncache *
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
syncookie_lookup(struct in_conninfo *inc, struct syncache_head *sch,
struct syncache *sc, struct tcpopt *to, struct tcphdr *th,
struct socket *so)
{
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
MD5_CTX ctx;
u_int32_t md5_buffer[MD5_DIGEST_LENGTH / sizeof(u_int32_t)];
u_int32_t data = 0;
u_int32_t *secbits;
tcp_seq ack, seq;
int off, mss, wnd, flags;
SCH_LOCK_ASSERT(sch);
/*
* Pull information out of SYN-ACK/ACK and
* revert sequence number advances.
*/
ack = th->th_ack - 1;
seq = th->th_seq - 1;
off = (ack >> 1) & 0x7;
mss = (ack >> 4) & 0x7;
flags = ack & 0x7f;
/* Which of the two secrets to use. */
secbits = (flags & 0x1) ? sch->sch_secbits_odd : sch->sch_secbits_even;
/*
* The secret wasn't updated for the lifetime of a syncookie,
* so this SYN-ACK/ACK is either too old (replay) or totally bogus.
*/
if (sch->sch_reseed + SYNCOOKIE_LIFETIME < time_uptime) {
return (NULL);
}
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
/* Recompute the digest so we can compare it. */
MD5Init(&ctx);
MD5Update(&ctx, ((u_int8_t *)secbits) + off,
SYNCOOKIE_SECRET_SIZE * sizeof(*secbits) - off);
MD5Update(&ctx, secbits, off);
MD5Update(&ctx, inc, sizeof(*inc));
MD5Update(&ctx, &seq, sizeof(seq));
MD5Update(&ctx, &flags, sizeof(flags));
MD5Final((u_int8_t *)&md5_buffer, &ctx);
/* Does the digest part of or ACK'ed ISS match? */
if ((ack & (~0x7f)) != (md5_buffer[0] << 7))
return (NULL);
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
/* Does the digest part of our reflected timestamp match? */
if (to->to_flags & TOF_TS) {
data = md5_buffer[3] ^ to->to_tsecr;
if ((data & (~0x3ff)) != (md5_buffer[2] << 10))
return (NULL);
}
/* Fill in the syncache values. */
bcopy(inc, &sc->sc_inc, sizeof(struct in_conninfo));
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
sc->sc_ipopts = NULL;
sc->sc_irs = seq;
sc->sc_iss = ack;
#ifdef INET6
if (inc->inc_flags & INC_ISIPV6) {
if (sotoinpcb(so)->inp_flags & IN6P_AUTOFLOWLABEL)
sc->sc_flowlabel = md5_buffer[1] & IPV6_FLOWLABEL_MASK;
} else
#endif
{
sc->sc_ip_ttl = sotoinpcb(so)->inp_ip_ttl;
sc->sc_ip_tos = sotoinpcb(so)->inp_ip_tos;
}
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
/* Additional parameters that were encoded in the timestamp. */
if (data) {
sc->sc_flags |= SCF_TIMESTAMP;
sc->sc_tsreflect = to->to_tsval;
sc->sc_ts = to->to_tsecr;
sc->sc_tsoff = to->to_tsecr - tcp_ts_getticks();
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
sc->sc_flags |= (data & 0x1) ? SCF_SIGNATURE : 0;
sc->sc_flags |= ((data >> 1) & 0x1) ? SCF_SACK : 0;
sc->sc_requested_s_scale = min((data >> 2) & 0xf,
TCP_MAX_WINSHIFT);
sc->sc_requested_r_scale = min((data >> 6) & 0xf,
TCP_MAX_WINSHIFT);
if (sc->sc_requested_s_scale || sc->sc_requested_r_scale)
sc->sc_flags |= SCF_WINSCALE;
} else
sc->sc_flags |= SCF_NOOPT;
wnd = sbspace(&so->so_rcv);
wnd = imax(wnd, 0);
wnd = imin(wnd, TCP_MAXWIN);
sc->sc_wnd = wnd;
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
sc->sc_rxmits = 0;
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
sc->sc_peer_mss = tcp_sc_msstab[mss];
TCPSTAT_INC(tcps_sc_recvcookie);
return (sc);
}
/*
* Returns the current number of syncache entries. This number
* will probably change before you get around to calling
* syncache_pcblist.
*/
int
syncache_pcbcount(void)
{
struct syncache_head *sch;
int count, i;
for (count = 0, i = 0; i < V_tcp_syncache.hashsize; i++) {
/* No need to lock for a read. */
sch = &V_tcp_syncache.hashbase[i];
count += sch->sch_length;
}
return count;
}
/*
* Exports the syncache entries to userland so that netstat can display
* them alongside the other sockets. This function is intended to be
* called only from tcp_pcblist.
*
* Due to concurrency on an active system, the number of pcbs exported
* may have no relation to max_pcbs. max_pcbs merely indicates the
* amount of space the caller allocated for this function to use.
*/
int
syncache_pcblist(struct sysctl_req *req, int max_pcbs, int *pcbs_exported)
{
struct xtcpcb xt;
struct syncache *sc;
struct syncache_head *sch;
int count, error, i;
for (count = 0, error = 0, i = 0; i < V_tcp_syncache.hashsize; i++) {
sch = &V_tcp_syncache.hashbase[i];
SCH_LOCK(sch);
TAILQ_FOREACH(sc, &sch->sch_bucket, sc_hash) {
if (count >= max_pcbs) {
SCH_UNLOCK(sch);
goto exit;
}
if (cr_cansee(req->td->td_ucred, sc->sc_cred) != 0)
continue;
bzero(&xt, sizeof(xt));
xt.xt_len = sizeof(xt);
if (sc->sc_inc.inc_flags & INC_ISIPV6)
xt.xt_inp.inp_vflag = INP_IPV6;
else
xt.xt_inp.inp_vflag = INP_IPV4;
bcopy(&sc->sc_inc, &xt.xt_inp.inp_inc, sizeof (struct in_conninfo));
xt.xt_tp.t_inpcb = &xt.xt_inp;
xt.xt_tp.t_state = TCPS_SYN_RECEIVED;
xt.xt_socket.xso_protocol = IPPROTO_TCP;
xt.xt_socket.xso_len = sizeof (struct xsocket);
xt.xt_socket.so_type = SOCK_STREAM;
xt.xt_socket.so_state = SS_ISCONNECTING;
error = SYSCTL_OUT(req, &xt, sizeof xt);
if (error) {
SCH_UNLOCK(sch);
goto exit;
}
count++;
}
SCH_UNLOCK(sch);
}
exit:
*pcbs_exported = count;
return error;
}