freebsd-skq/sys/arm/at91/at91rm9200.c

/*-
 * Copyright (c) 2005 Olivier Houchard.  All rights reserved.
 * Copyright (c) 2010 Greg Ansley.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>

#define	_ARM32_BUS_DMA_PRIVATE
#include <machine/bus.h>

#include <arm/at91/at91var.h>
#include <arm/at91/at91reg.h>
#include <arm/at91/at91rm92reg.h>
#include <arm/at91/at91_aicreg.h>
#include <arm/at91/at91_pmcreg.h>
#include <arm/at91/at91_streg.h>
#include <arm/at91/at91_pmcvar.h>
#include <arm/at91/at91soc.h>

/*
 * Standard priority levels for the system.  0 is lowest and 7 is highest.
 * These values are the ones Atmel uses for its Linux port, which differ
 * a little form the ones that are in the standard distribution.  Also,
 * the ones marked with 'TWEEK' are different based on experience.
 */
static const int at91_irq_prio[32] =
{
	7,	/* Advanced Interrupt Controller (FIQ) */
	7,	/* System Peripherals */
	1,	/* Parallel IO Controller A */
	1,	/* Parallel IO Controller B */
	1,	/* Parallel IO Controller C */
	1,	/* Parallel IO Controller D */
	5,	/* USART 0 */
	5,	/* USART 1 */
	5,	/* USART 2 */
	5,	/* USART 3 */
	0,	/* Multimedia Card Interface */
	2,	/* USB Device Port */
	4,	/* Two-Wire Interface */		/* TWEEK */
	5,	/* Serial Peripheral Interface */
	4,	/* Serial Synchronous Controller 0 */
	6,	/* Serial Synchronous Controller 1 */	/* TWEEK */
	4,	/* Serial Synchronous Controller 2 */
	0,	/* Timer Counter 0 */
	6,	/* Timer Counter 1 */			/* TWEEK */
	0,	/* Timer Counter 2 */
	0,	/* Timer Counter 3 */
	0,	/* Timer Counter 4 */
	0,	/* Timer Counter 5 */
	2,	/* USB Host port */
	3,	/* Ethernet MAC */
	0,	/* Advanced Interrupt Controller (IRQ0) */
	0,	/* Advanced Interrupt Controller (IRQ1) */
	0,	/* Advanced Interrupt Controller (IRQ2) */
	0,	/* Advanced Interrupt Controller (IRQ3) */
	0,	/* Advanced Interrupt Controller (IRQ4) */
	0,	/* Advanced Interrupt Controller (IRQ5) */
 	0	/* Advanced Interrupt Controller (IRQ6) */
};

static const uint32_t at91_pio_base[] = {
	AT91RM92_PIOA_BASE,
	AT91RM92_PIOB_BASE,
	AT91RM92_PIOC_BASE,
	AT91RM92_PIOD_BASE,
};

#define DEVICE(_name, _id, _unit)		\
	{					\
		_name, _unit,			\
		AT91RM92_ ## _id ##_BASE,	\
		AT91RM92_ ## _id ## _SIZE,	\
		AT91RM92_IRQ_ ## _id		\
	}

static const struct cpu_devs at91_devs[] =
{
	DEVICE("at91_aic",   AIC,    0),
	DEVICE("at91_pmc",   PMC,    0),
	DEVICE("at91_st",    ST,     0),
	DEVICE("at91_pio",   PIOA,   0),
	DEVICE("at91_pio",   PIOB,   1),
	DEVICE("at91_pio",   PIOC,   2),
	DEVICE("at91_pio",   PIOD,   3),
	DEVICE("at91_rtc",   RTC,    0),

	DEVICE("at91_mci",   MCI,    0),
	DEVICE("at91_twi",   TWI,    0),
	DEVICE("at91_udp",   UDP,    0),
	DEVICE("ate",        EMAC,   0),
	DEVICE("at91_ssc",   SSC0,   0),
	DEVICE("at91_ssc",   SSC1,   1),
	DEVICE("at91_ssc",   SSC2,   2),
	DEVICE("spi",        SPI,    0),

	DEVICE("uart",       DBGU,   0),
	DEVICE("uart",       USART0, 1),
	DEVICE("uart",       USART1, 2),
	DEVICE("uart",       USART2, 3),
	DEVICE("uart",       USART3, 4),
	DEVICE("at91_mc",    MC,     0),
	DEVICE("at91_tc",    TC0,    0),
	DEVICE("at91_tc",    TC1,    1),
	DEVICE("ohci",       OHCI,   0),
	DEVICE("at91_cfata", CF,     0),
	{	0, 0, 0, 0, 0 }
};

static uint32_t
at91_pll_outb(int freq)
{

	if (freq > 155000000)
		return (0x0000);
	else
		return (0x8000);
}

#if 0
/* -- XXX are these needed? */
	/* Disable all interrupts for RTC (0xe24 == RTC_IDR) */
	bus_space_write_4(sc->sc_st, sc->sc_sys_sh, 0xe24, 0xffffffff);

	/* Disable all interrupts for the SDRAM controller */
	bus_space_write_4(sc->sc_st, sc->sc_sys_sh, 0xfa8, 0xffffffff);
#endif

static void
at91_clock_init(void)
{
	struct at91_pmc_clock *clk;

	/* Update USB device port clock info */
	clk = at91_pmc_clock_ref("udpck");
	clk->pmc_mask  = PMC_SCER_UDP;
	at91_pmc_clock_deref(clk);

	/* Update USB host port clock info */
	clk = at91_pmc_clock_ref("uhpck");
	clk->pmc_mask  = PMC_SCER_UHP;
	at91_pmc_clock_deref(clk);

	/* Each SOC has different PLL contraints */
	clk = at91_pmc_clock_ref("plla");
	clk->pll_min_in    = RM9200_PLL_A_MIN_IN_FREQ;		/*   1 MHz */
	clk->pll_max_in    = RM9200_PLL_A_MAX_IN_FREQ;		/*  32 MHz */
	clk->pll_min_out   = RM9200_PLL_A_MIN_OUT_FREQ;		/*  80 MHz */
	clk->pll_max_out   = RM9200_PLL_A_MAX_OUT_FREQ;		/* 180 MHz */
	clk->pll_mul_shift = RM9200_PLL_A_MUL_SHIFT;
	clk->pll_mul_mask  = RM9200_PLL_A_MUL_MASK;
	clk->pll_div_shift = RM9200_PLL_A_DIV_SHIFT;
	clk->pll_div_mask  = RM9200_PLL_A_DIV_MASK;
	clk->set_outb      = at91_pll_outb;
	at91_pmc_clock_deref(clk);

	clk = at91_pmc_clock_ref("pllb");
	clk->pll_min_in    = RM9200_PLL_B_MIN_IN_FREQ;		/* 100 KHz */
	clk->pll_max_in    = RM9200_PLL_B_MAX_IN_FREQ;		/*  32 MHz */
	clk->pll_min_out   = RM9200_PLL_B_MIN_OUT_FREQ;		/*  30 MHz */
	clk->pll_max_out   = RM9200_PLL_B_MAX_OUT_FREQ;		/* 240 MHz */
	clk->pll_mul_shift = RM9200_PLL_B_MUL_SHIFT;
	clk->pll_mul_mask  = RM9200_PLL_B_MUL_MASK;
	clk->pll_div_shift = RM9200_PLL_B_DIV_SHIFT;
	clk->pll_div_mask  = RM9200_PLL_B_DIV_MASK;
	clk->set_outb      = at91_pll_outb;
	at91_pmc_clock_deref(clk);
}

static struct at91_soc_data soc_data = {
	.soc_delay = at91_st_delay,
	.soc_reset = at91_st_cpu_reset,
	.soc_clock_init = at91_clock_init,
	.soc_irq_prio = at91_irq_prio,
	.soc_children = at91_devs,
	.soc_pio_base = at91_pio_base,
	.soc_pio_count = nitems(at91_pio_base),
};

AT91_SOC(AT91_T_RM9200, &soc_data);