d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98087a066f
freebsd-skq/sys/mips/conf/AP93

47 lines
1.0 KiB
Plaintext
Raw Normal View History

Add in the AP93 configuration file. The AP93 has: * AR7240 - mips24k processor with integrated 10/100 switch and various other peripherals; * AR9283 - 2x2 2.4GHz 802.11n (with calibration data in flash); * 64MB RAM; * 16MB SPI flash. The switch code detects as an AR8216 at the present moment, which isn't _entirely_ strictly true. However, the MII/MDIO routing in AP93.hints works - the arge0 MAC connects to PHY4 in the switch, but via the switch internal MDIO bus. The switch connects to arge0's MDIO bus, but only to export the switch registers. Thanks to stb and ray for the switch work, and ray for helping determine what the correct switch hints should be for this thing.
2012-05-12 04:52:59 +00:00
#
Convert AP93 to use the new AR724X_BASE configuration file.
2012-08-27 21:59:52 +00:00
# Specific board setup for the Atheros AP91 reference board.
Add in the AP93 configuration file. The AP93 has: * AR7240 - mips24k processor with integrated 10/100 switch and various other peripherals; * AR9283 - 2x2 2.4GHz 802.11n (with calibration data in flash); * 64MB RAM; * 16MB SPI flash. The switch code detects as an AR8216 at the present moment, which isn't _entirely_ strictly true. However, the MII/MDIO routing in AP93.hints works - the arge0 MAC connects to PHY4 in the switch, but via the switch internal MDIO bus. The switch connects to arge0's MDIO bus, but only to export the switch registers. Thanks to stb and ray for the switch work, and ray for helping determine what the correct switch hints should be for this thing.
2012-05-12 04:52:59 +00:00
#
Convert AP93 to use the new AR724X_BASE configuration file.
2012-08-27 21:59:52 +00:00
# The AP93 has the following hardware:
Add in the AP93 configuration file. The AP93 has: * AR7240 - mips24k processor with integrated 10/100 switch and various other peripherals; * AR9283 - 2x2 2.4GHz 802.11n (with calibration data in flash); * 64MB RAM; * 16MB SPI flash. The switch code detects as an AR8216 at the present moment, which isn't _entirely_ strictly true. However, the MII/MDIO routing in AP93.hints works - the arge0 MAC connects to PHY4 in the switch, but via the switch internal MDIO bus. The switch connects to arge0's MDIO bus, but only to export the switch registers. Thanks to stb and ray for the switch work, and ray for helping determine what the correct switch hints should be for this thing.
2012-05-12 04:52:59 +00:00
#
Convert AP93 to use the new AR724X_BASE configuration file.
2012-08-27 21:59:52 +00:00
# + AR7240 CPU SoC
# + AR9280 Wifi
# + Integrated switch (XXX speed?)
# + 16MB flash
# + 64MB RAM
# + uboot environment
Add in the AP93 configuration file. The AP93 has: * AR7240 - mips24k processor with integrated 10/100 switch and various other peripherals; * AR9283 - 2x2 2.4GHz 802.11n (with calibration data in flash); * 64MB RAM; * 16MB SPI flash. The switch code detects as an AR8216 at the present moment, which isn't _entirely_ strictly true. However, the MII/MDIO routing in AP93.hints works - the arge0 MAC connects to PHY4 in the switch, but via the switch internal MDIO bus. The switch connects to arge0's MDIO bus, but only to export the switch registers. Thanks to stb and ray for the switch work, and ray for helping determine what the correct switch hints should be for this thing.
2012-05-12 04:52:59 +00:00
Convert AP93 to use the new AR724X_BASE configuration file.
2012-08-27 21:59:52 +00:00
# $FreeBSD$
Add in the AP93 configuration file. The AP93 has: * AR7240 - mips24k processor with integrated 10/100 switch and various other peripherals; * AR9283 - 2x2 2.4GHz 802.11n (with calibration data in flash); * 64MB RAM; * 16MB SPI flash. The switch code detects as an AR8216 at the present moment, which isn't _entirely_ strictly true. However, the MII/MDIO routing in AP93.hints works - the arge0 MAC connects to PHY4 in the switch, but via the switch internal MDIO bus. The switch connects to arge0's MDIO bus, but only to export the switch registers. Thanks to stb and ray for the switch work, and ray for helping determine what the correct switch hints should be for this thing.
2012-05-12 04:52:59 +00:00
Mark the mostly redundant kernels that just pull in something from _BASE as NO_UNIVERSE Differential Revision: https://reviews.freebsd.org/D4200
2015-11-19 01:58:12 +00:00
#NO_UNIVERSE
[ar71xx] rename AR724X_BASE -> std.AR724X
2017-05-31 16:32:33 +00:00
include "std.AR724X"
Convert AP93 to use the new AR724X_BASE configuration file.
2012-08-27 21:59:52 +00:00
ident "AP93"
hints "AP93.hints"
Add in the AP93 configuration file. The AP93 has: * AR7240 - mips24k processor with integrated 10/100 switch and various other peripherals; * AR9283 - 2x2 2.4GHz 802.11n (with calibration data in flash); * 64MB RAM; * 16MB SPI flash. The switch code detects as an AR8216 at the present moment, which isn't _entirely_ strictly true. However, the MII/MDIO routing in AP93.hints works - the arge0 MAC connects to PHY4 in the switch, but via the switch internal MDIO bus. The switch connects to arge0's MDIO bus, but only to export the switch registers. Thanks to stb and ray for the switch work, and ray for helping determine what the correct switch hints should be for this thing.
2012-05-12 04:52:59 +00:00
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options AR71XX_REALMEM=64*1024*1024
Add in the AP93 configuration file. The AP93 has: * AR7240 - mips24k processor with integrated 10/100 switch and various other peripherals; * AR9283 - 2x2 2.4GHz 802.11n (with calibration data in flash); * 64MB RAM; * 16MB SPI flash. The switch code detects as an AR8216 at the present moment, which isn't _entirely_ strictly true. However, the MII/MDIO routing in AP93.hints works - the arge0 MAC connects to PHY4 in the switch, but via the switch internal MDIO bus. The switch connects to arge0's MDIO bus, but only to export the switch registers. Thanks to stb and ray for the switch work, and ray for helping determine what the correct switch hints should be for this thing.
2012-05-12 04:52:59 +00:00
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options AR71XX_ENV_UBOOT
Add in the AP93 configuration file. The AP93 has: * AR7240 - mips24k processor with integrated 10/100 switch and various other peripherals; * AR9283 - 2x2 2.4GHz 802.11n (with calibration data in flash); * 64MB RAM; * 16MB SPI flash. The switch code detects as an AR8216 at the present moment, which isn't _entirely_ strictly true. However, the MII/MDIO routing in AP93.hints works - the arge0 MAC connects to PHY4 in the switch, but via the switch internal MDIO bus. The switch connects to arge0's MDIO bus, but only to export the switch registers. Thanks to stb and ray for the switch work, and ray for helping determine what the correct switch hints should be for this thing.
2012-05-12 04:52:59 +00:00
Convert AP93 to use the new AR724X_BASE configuration file.
2012-08-27 21:59:52 +00:00
# For DOS - enable if required
options MSDOSFS
Add in the AP93 configuration file. The AP93 has: * AR7240 - mips24k processor with integrated 10/100 switch and various other peripherals; * AR9283 - 2x2 2.4GHz 802.11n (with calibration data in flash); * 64MB RAM; * 16MB SPI flash. The switch code detects as an AR8216 at the present moment, which isn't _entirely_ strictly true. However, the MII/MDIO routing in AP93.hints works - the arge0 MAC connects to PHY4 in the switch, but via the switch internal MDIO bus. The switch connects to arge0's MDIO bus, but only to export the switch registers. Thanks to stb and ray for the switch work, and ray for helping determine what the correct switch hints should be for this thing.
2012-05-12 04:52:59 +00:00
Convert AP93 to use the new AR724X_BASE configuration file.
2012-08-27 21:59:52 +00:00
# uncompress - to boot read-only lzma natively from flash
Modularize xz. Embedded lzma decompression library becomes a module usable by other consumers, in addition to geom_uzip. Most important code changes are - removal of XZ_DEC_SINGLE define, we need the code to work with XZ_DEC_DYNALLOC; - xz_crc32_init() call is removed from geom_uzip, xz module handles initialization on its own. xz is no longer embedded into geom_uzip, instead the depend line for the module is provided, and corresponding kernel option is added to each MIPS kernel config file using geom_uzip. The commit also carries unrelated cleanup by removing excess "device geom_uzip" in places which were missed in r344479. Reviewed by: cem, hselasky, ray, slavash (previous versions) Sponsored by: Mellanox Technologies Differential revision: https://reviews.freebsd.org/D19266 MFC after: 3 weeks
2019-02-26 19:55:03 +00:00
device xz
Obsolete mkulzma(8) and geom_uncompress(4), their functionality is now provided by mkuzip(8) and geom_uzip(4) respectively. MFC after: 1 month
2016-02-24 00:39:36 +00:00
options GEOM_UZIP
options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uzip\"
Add in the AP93 configuration file. The AP93 has: * AR7240 - mips24k processor with integrated 10/100 switch and various other peripherals; * AR9283 - 2x2 2.4GHz 802.11n (with calibration data in flash); * 64MB RAM; * 16MB SPI flash. The switch code detects as an AR8216 at the present moment, which isn't _entirely_ strictly true. However, the MII/MDIO routing in AP93.hints works - the arge0 MAC connects to PHY4 in the switch, but via the switch internal MDIO bus. The switch connects to arge0's MDIO bus, but only to export the switch registers. Thanks to stb and ray for the switch work, and ray for helping determine what the correct switch hints should be for this thing.
2012-05-12 04:52:59 +00:00
Convert AP93 to use the new AR724X_BASE configuration file.
2012-08-27 21:59:52 +00:00
# Used for the static uboot partition map
device geom_map
Add in the AP93 configuration file. The AP93 has: * AR7240 - mips24k processor with integrated 10/100 switch and various other peripherals; * AR9283 - 2x2 2.4GHz 802.11n (with calibration data in flash); * 64MB RAM; * 16MB SPI flash. The switch code detects as an AR8216 at the present moment, which isn't _entirely_ strictly true. However, the MII/MDIO routing in AP93.hints works - the arge0 MAC connects to PHY4 in the switch, but via the switch internal MDIO bus. The switch connects to arge0's MDIO bus, but only to export the switch registers. Thanks to stb and ray for the switch work, and ray for helping determine what the correct switch hints should be for this thing.
2012-05-12 04:52:59 +00:00
Convert AP93 to use the new AR724X_BASE configuration file.
2012-08-27 21:59:52 +00:00
# Options needed for the EEPROM based calibration/PCI configuration data.
options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
device firmware # Used by the above
Add in the AP93 configuration file. The AP93 has: * AR7240 - mips24k processor with integrated 10/100 switch and various other peripherals; * AR9283 - 2x2 2.4GHz 802.11n (with calibration data in flash); * 64MB RAM; * 16MB SPI flash. The switch code detects as an AR8216 at the present moment, which isn't _entirely_ strictly true. However, the MII/MDIO routing in AP93.hints works - the arge0 MAC connects to PHY4 in the switch, but via the switch internal MDIO bus. The switch connects to arge0's MDIO bus, but only to export the switch registers. Thanks to stb and ray for the switch work, and ray for helping determine what the correct switch hints should be for this thing.
2012-05-12 04:52:59 +00:00
Convert AP93 to use the new AR724X_BASE configuration file.
2012-08-27 21:59:52 +00:00
# Options required for miiproxy and mdiobus
options ARGE_MDIO # Export an MDIO bus separate from arge
device miiproxy # MDIO bus <-> MII PHY rendezvous
Add in the AP93 configuration file. The AP93 has: * AR7240 - mips24k processor with integrated 10/100 switch and various other peripherals; * AR9283 - 2x2 2.4GHz 802.11n (with calibration data in flash); * 64MB RAM; * 16MB SPI flash. The switch code detects as an AR8216 at the present moment, which isn't _entirely_ strictly true. However, the MII/MDIO routing in AP93.hints works - the arge0 MAC connects to PHY4 in the switch, but via the switch internal MDIO bus. The switch connects to arge0's MDIO bus, but only to export the switch registers. Thanks to stb and ray for the switch work, and ray for helping determine what the correct switch hints should be for this thing.
2012-05-12 04:52:59 +00:00
device etherswitch
device arswitch
Reference in New Issue Copy Permalink