d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
993d3ded79
freebsd-skq/share/mk/src.opts.mk

469 lines
10 KiB
Makefile
Raw Normal View History

Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
# $FreeBSD$
#
# Option file for FreeBSD /usr/src builds.
#
# Users define WITH_FOO and WITHOUT_FOO on the command line or in /etc/src.conf
# and /etc/make.conf files. These translate in the build system to MK_FOO={yes,no}
# with sensible (usually) defaults.
#
# Makefiles must include bsd.opts.mk after defining specific MK_FOO options that
# are applicable for that Makefile (typically there are none, but sometimes there
# are exceptions). Recursive makes usually add MK_FOO=no for options that they wish
# to omit from that make.
#
Fix typo in comments. Noticed by: brooks@
2014-12-12 18:54:31 +00:00
# Makefiles must include bsd.mkopt.mk before they test the value of any MK_FOO
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
# variable.
#
Use src.opts.mk in preference to bsd.own.mk except where we need stuff from the latter.
2014-05-06 04:22:01 +00:00
# Makefiles may also assume that this file is included by src.opts.mk should it
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
# need variables defined there prior to the end of the Makefile where
# bsd.{subdir,lib.bin}.mk is traditionally included.
#
# The old-style YES_FOO and NO_FOO are being phased out. No new instances of them
# should be added. Old instances should be removed since they were just to
# bridge the gap between FreeBSD 4 and FreeBSD 5.
#
# Makefiles should never test WITH_FOO or WITHOUT_FOO directly (although an
# exception is made for _WITHOUT_SRCONF which turns off this mechanism
Introduce kern.opts.mk to hold all the options for kernel module builds. Include this in the right places. Make src.opts.mk optional so that modules can be built outside of the tree in the ports system. PR: 189520
2014-05-09 21:11:27 +00:00
# completely inside bsd.*.mk files).
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
#
.if !target(__<src.opts.mk>__)
__<src.opts.mk>__:
We have to include bsd.opts.mk (included in bsd.own.mk) after /etc/src.conf so that options set there will affect the options defined in bsd.opts.mk. Fix a few comments while I'm here.
2014-05-09 04:49:48 +00:00
.include <bsd.own.mk>
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
#
# Define MK_* variables (which are either "yes" or "no") for users
# to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the
# make(1) environment.
# These should be tested with `== "no"' or `!= "no"' in makefiles.
# The NO_* variables should only be set by makefiles for variables
# that haven't been converted over.
#
Disable in-tree GDB by default on x86, mips, and powerpc. GDB in ports contains all of the functionality as GDB in base (including kgdb) for these platforms along with additional functionality. In-tree GDB remains enabled on ARM and sparc64. GDB in ports does not currently support kernel debugging on arm, and ports GDB for sparc64 has not been tested (though it does include sparc64 support). Reviewed by: bdrewery, emaste, imp Relnotes: yes Sponsored by: DARPA / AFRL Differential Revision: https://reviews.freebsd.org/D10399
2017-04-18 16:27:48 +00:00
# These options are used by the src builds
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
__DEFAULT_YES_OPTIONS = \
ACCT \
ACPI \
AMD \
APM \
AT \
ATM \
AUDIT \
AUTHPF \
Add MK_AUTOFS knob for building and installing autofs(4), et al MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-01-26 07:15:49 +00:00
AUTOFS \
Add MK_BHYVE knob for building and installing bhyve(4), et al MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-01-26 06:44:48 +00:00
BHYVE \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
BINUTILS \
BINUTILS_BOOTSTRAP \
Add basic blacklist build support Reviewed by: rpaulo Approved by: rpaulo Relnotes: YES Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D5913
2016-06-02 19:06:04 +00:00
BLACKLIST \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
BLUETOOTH \
BOOT \
Add the following options to enable/disable several features in the base system WITHOUT_BOOTPARAMD - bootparamd WITHOUT_BOOTPD - bootpd WITHOUT_FINGER - finger, fingerd WITHOUT_FTP - ftp, ftpd WITHOUT_INETD - inetd WITHOUT_RBOOTD - rbootd WITHOUT_TCP_WRAPPERS - tcpd, et al WITHOUT_TFTP - tftp, tftp-server WITHOUT_TIMED - timed MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-02-04 10:19:32 +00:00
BOOTPARAMD \
BOOTPD \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
BSD_CPIO \
bsdgrep: add BSD_GREP_FASTMATCH knob for built-in fastmatch Bugs have been found in the fastmatch implementation as used in bsdgrep. Some have been fixed (r316495) while fixes for others are in review (D10098). In comparison with the fastmatch implementation, Kyle Evans found that: - regex(3)'s performance with literal expressions offers a speed improvement over fastmatch - regex(3)'s performance, both with simple BREs and EREs, seems to be comparable The regex implementation was imported in r226035, and the commit message reports: This is a temporary solution until the whole regex library is not replaced so that BSD grep development can continue and the backported code gets some review and testing. This change only improves scalability slightly, there is no big performance boost yet but several minor bugs have been found and fixed. Introduce a WITH_/WITHOUT_BSD_GREP_FASTMATCH knob to support testing of both approaches. PR: 175314, 194823 Submitted by: Kyle Evans <kevans91 at ksu.edu> Reviewed by: bdrewery (in part) Differential Revision: https://reviews.freebsd.org/D10282
2017-04-21 14:36:09 +00:00
BSD_GREP_FASTMATCH \
Add MK_BSDINSTALL knob for building and installing bsdinstall MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-01-25 04:43:13 +00:00
BSDINSTALL \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
BSNMP \
BZIP2 \
CALENDAR \
CAPSICUM \
CASPER \
Add MK_CCD knob for building and installing ccd(4), ccdconfig, etc MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-01-25 04:52:48 +00:00
CCD \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
CDDL \
CPP \
CROSS_COMPILER \
CRYPT \
CTM \
Attach the CUSE library and kernel module to the default FreeBSD builds. Bump the FreeBSD version number.
2014-06-13 08:53:49 +00:00
CUSE \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
CXX \
Add a WITHOUT_DIALOG src.conf(5) knob It also turns off dependencies (bsdinstall, bsdconfig, dpv, tzsetup). Reviewed by: dteske Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D7969
2016-09-27 18:08:38 +00:00
DIALOG \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
DICT \
DMAGENT \
DYNAMICROOT \
ED_CRYPTO \
Add MK_EE knob to control installing edit, ee, etc MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-01-25 00:03:44 +00:00
EE \
Create libefivar library. This library aims to provide the same API as the GPL'd version of this library. It implements the common Linux API for programatically manipulating UEFI environment varibales using the UEFI Runtime Services the kernel provides. It replaces the old efi library since it is programmed to a different interface, but retails the CHAR16 to UTF-8 and vice versa conversion routines. The new name is to match Linux program's expectations. Differential Revision: https://reviews.freebsd.org/D8128 Reviewed by: kib@, wblock@, Ganael Laplanche
2016-10-11 22:30:41 +00:00
EFI \
Separate ELFTOOLCHAIN_BOOTSTRAP from BINUTILS_BOOTSTRAP For most cases they are equivalent, but BINUTILS_BOOTSTRAP is a BROKEN_OPTION on arm64 as the in-tree GNU binutils do not support it, so we need a separate internal flag for ELF Tool Chain. Reviewed by: andrew, brooks Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D3381
2015-08-17 10:48:55 +00:00
ELFTOOLCHAIN_BOOTSTRAP \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
EXAMPLES \
FDT \
Add MK_FILE to control whether or not to build file(1), libmagic(3), etc MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-02-04 10:24:40 +00:00
FILE \
Add the following options to enable/disable several features in the base system WITHOUT_BOOTPARAMD - bootparamd WITHOUT_BOOTPD - bootpd WITHOUT_FINGER - finger, fingerd WITHOUT_FTP - ftp, ftpd WITHOUT_INETD - inetd WITHOUT_RBOOTD - rbootd WITHOUT_TCP_WRAPPERS - tcpd, et al WITHOUT_TFTP - tftp, tftp-server WITHOUT_TIMED - timed MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-02-04 10:19:32 +00:00
FINGER \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
FLOPPY \
FMTREE \
FORTH \
FP_LIBC \
FREEBSD_UPDATE \
Add the following options to enable/disable several features in the base system WITHOUT_BOOTPARAMD - bootparamd WITHOUT_BOOTPD - bootpd WITHOUT_FINGER - finger, fingerd WITHOUT_FTP - ftp, ftpd WITHOUT_INETD - inetd WITHOUT_RBOOTD - rbootd WITHOUT_TCP_WRAPPERS - tcpd, et al WITHOUT_TFTP - tftp, tftp-server WITHOUT_TIMED - timed MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-02-04 10:19:32 +00:00
FTP \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
GAMES \
GCOV \
Add a new GDB_LIBEXEC option to install gdb and kgdb to /usr/libexec. When this option is enabled, only gdb and kgdb are installed to /usr/libexec for use by crashinfo(8). Other bits of GDB such as gdbserver and gdbtui are not installed. For this option to be effective, GDB must be enabled. Rework r317094 to re-enable GDB on all platforms but enable GDB_LIBEXEC on platforms for which the GDB in ports is a superset of functionality. Reviewed by: emaste, kib Suggested by: kib Relnotes: yes Differential Revision: https://reviews.freebsd.org/D10449
2017-04-25 18:08:56 +00:00
GDB \
Add knobs to make GNU diff and GNU grep optional This is added to facilitate experiments building FreeBSD without copyleft software. If WITHOUT_GNU_DIFF is set no /usr/bin/diff or /usr/bin/diff3 will be built. If WITHOUT_GNU_GREP is set then BSD grep will be installed as /usr/bin/bsdgrep or /usr/bin/grep, depending on the WITH_BSD_GREP knob. Reviewed by: brooks (earlier) Sponsored by: The FreeBSD Foundation Differential Revision: Differential Revision: https://reviews.freebsd.org/D8288
2016-10-20 14:48:57 +00:00
GNU_DIFF \
GNU_GREP \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
GPIO \
Add MK_HAST knob for building and installing hastd(8), et al MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-01-26 06:27:07 +00:00
HAST \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
HTML \
HYPERV isn't available on all architectures, but just on by default for i386/amd64. Rather, it only works on i386/amd64 and should only be built there. Rather than change the default based on which architecutre, do things more directly by only building it on i386/amd64 and having it always on. This is how we handle other options that are relevant only for a few architectures.
2014-10-16 00:33:06 +00:00
HYPERV \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
ICONV \
INET \
INET6 \
Add the following options to enable/disable several features in the base system WITHOUT_BOOTPARAMD - bootparamd WITHOUT_BOOTPD - bootpd WITHOUT_FINGER - finger, fingerd WITHOUT_FTP - ftp, ftpd WITHOUT_INETD - inetd WITHOUT_RBOOTD - rbootd WITHOUT_TCP_WRAPPERS - tcpd, et al WITHOUT_TFTP - tftp, tftp-server WITHOUT_TIMED - timed MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-02-04 10:19:32 +00:00
INETD \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
IPFILTER \
IPFW \
Add MK_ISCSI knob for building the iscsi initiator, iscsi daemon, kernel modules, etc MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-01-25 04:20:11 +00:00
ISCSI \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
JAIL \
KDUMP \
KVM \
LDNS \
LDNS_UTILS \
LEGACY_CONSOLE \
LIB32 \
LIBPTHREAD \
LIBTHR \
LOCALES \
LOCATE \
LPR \
LS_COLORS \
LZMA_SUPPORT \
MAIL \
MAILWRAPPER \
MAKE \
NDIS \
NETCAT \
NETGRAPH \
NLS_CATALOGS \
NS_CACHING \
NTP \
OPENSSL \
PAM \
PC_SYSINSTALL \
PF \
PKGBOOTSTRAP \
PMC \
PORTSNAP \
PPP \
QUOTAS \
Conditionalize building radius support into libpam, ppp, etc via MK_RADIUS_SUPPORT MFC after: 1 week Sponsored by: EMC / Isilon Storage Division
2015-02-04 06:53:45 +00:00
RADIUS_SUPPORT \
Add the following options to enable/disable several features in the base system WITHOUT_BOOTPARAMD - bootparamd WITHOUT_BOOTPD - bootpd WITHOUT_FINGER - finger, fingerd WITHOUT_FTP - ftp, ftpd WITHOUT_INETD - inetd WITHOUT_RBOOTD - rbootd WITHOUT_TCP_WRAPPERS - tcpd, et al WITHOUT_TFTP - tftp, tftp-server WITHOUT_TIMED - timed MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-02-04 10:19:32 +00:00
RBOOTD \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
RESCUE \
ROUTED \
SENDMAIL \
SETUID_LOGIN \
SHAREDOCS \
SOURCELESS \
SOURCELESS_HOST \
SOURCELESS_UCODE \
SVNLITE \
SYSCONS \
WITH_SYSTEM_COMPILER: Enable by default This improves buildworld, toolchain, kernel-toolchain, and universe targets. See r300354 or src.conf(5) for more details. Approved by: re (gjb) Relnotes: yes (r300354) Sponsored by: EMC / Isilon Storage Division
2016-06-24 19:55:59 +00:00
SYSTEM_COMPILER \
Add MK_TALK knob for building the talk and talkd MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-01-25 04:37:44 +00:00
TALK \
Add the following options to enable/disable several features in the base system WITHOUT_BOOTPARAMD - bootparamd WITHOUT_BOOTPD - bootpd WITHOUT_FINGER - finger, fingerd WITHOUT_FTP - ftp, ftpd WITHOUT_INETD - inetd WITHOUT_RBOOTD - rbootd WITHOUT_TCP_WRAPPERS - tcpd, et al WITHOUT_TFTP - tftp, tftp-server WITHOUT_TIMED - timed MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-02-04 10:19:32 +00:00
TCP_WRAPPERS \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
TCSH \
TELNET \
Enable MK_TESTS by default, take 2. This is a redo of r267424, which was reverted in r267432 because it broke "make buildworld" from FreeBSD 9.x. This issue has been resolved and this change is still "make tinderbox" clean.
2014-07-16 21:40:11 +00:00
TESTS \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
TEXTPROC \
Add the following options to enable/disable several features in the base system WITHOUT_BOOTPARAMD - bootparamd WITHOUT_BOOTPD - bootpd WITHOUT_FINGER - finger, fingerd WITHOUT_FTP - ftp, ftpd WITHOUT_INETD - inetd WITHOUT_RBOOTD - rbootd WITHOUT_TCP_WRAPPERS - tcpd, et al WITHOUT_TFTP - tftp, tftp-server WITHOUT_TIMED - timed MFC after: 2 weeks Sponsored by: EMC / Isilon Storage Division
2015-02-04 10:19:32 +00:00
TFTP \
TIMED \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
UNBOUND \
USB \
UTMPX \
VI \
Rename the WITHOUT_VT_SUPPORT knob to WITHOUT_VT The _SUPPORT knobs have a consistent meaning which differs from the behaviour controlled by this knob. As the knob is opt-out and has not appeared in a release the impact should be low. Suggested by: imp, wblock MFC after: 1 week
2014-06-30 00:20:12 +00:00
VT \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
WIRELESS \
WPA_SUPPLICANT_EAPOL \
ZFS \
ZONEINFO
__DEFAULT_NO_OPTIONS = \
BSD_GREP \
CLANG_EXTRAS \
Add a src.conf option to build and install the DTrace test suite. Reviewed by: gnn, ngie Differential Revision: https://reviews.freebsd.org/D3195
2015-08-02 00:37:33 +00:00
DTRACE_TESTS \
bsdgrep: disable GNU_GREP_COMPAT by default The GNU extension bits in the base system are old, no longer faithful to upstream, and surprising in some regards. Switch to documenting WITH_GNU_GREP_COMPAT and default GNU_GREP_COMPAT to OFF in the name of good behavior. According to http://www.regular-expressions.info, GNU extensions: - Add missing quantifiers to BREs: \?, \+ - Add branching to BREs: \| - Add backreferences (\1 through \9) to EREs - Add \w, \W, \s, and \S corresponding to :alnum:, [^[:alnum:]], :space:, and [^[:space:]] respectively - Add word boundaries and anchors: \b: word boundary \B: not word boundary \<: Strt of word \>: End of word \`: Start of subject string \': End of subject string These extensions are still available in /usr/bin/grep by default today, as it is still GNU grep. As part of the bsdgrep migration plan these extensions may be added to bsdgrep's regex support if necessary. Submitted by: Kyle Evans <kevans91 at ksu.edu> Reviewed by: cem Differential Revision: https://reviews.freebsd.org/D10114
2017-04-21 14:50:29 +00:00
GNU_GREP_COMPAT \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
HESIOD \
Add new LIBSOFT option. This is similar to the LIB32 option, except for libraries that follow the soft float ABI. It's only supported on armv6 as a transition to the new hard float ABI, so mark as broken everywhere else.
2016-01-03 04:32:04 +00:00
LIBSOFT \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
NAND \
OFED \
OPENLDAP \
Disable RCMDS by default. This was announced in this thread: https://lists.freebsd.org/pipermail/freebsd-arch/2017-June/018239.html Applying plan proposed by ngie@ in: https://lists.freebsd.org/pipermail/freebsd-arch/2017-June/018249.html The port has been submitted as net/bsdrcmds in r444814. Approved by: bapt, roberto, and others
2017-07-01 10:04:42 +00:00
RCMDS \
Build loaders reproducibly when WITH_REPRODUCIBLE_BUILD When WITH_REPRODUCIBLE_BUILD=yes is set in src.conf(5), eliminate the time, user, and host from the loader's version information. This allows builds to produce bit-for-bit identical output. Reviewed by: bapt MFC after: 1 month Relnotes: yes Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D8842
2016-12-19 14:45:59 +00:00
REPRODUCIBLE_BUILD \
Add a knob, WITH*_RPCBIND_WARMSTART_SUPPORT, to allow the end-user to build rpcbind(8) with/without warmstart support. The knob defaults to off to preserve POLA for the feature. See rpcbind(8) for more details about the warmstart feature. MFC after: 7 weeks Relnotes: yes Sponsored by: Dell EMC Isilon
2017-04-19 20:45:46 +00:00
RPCBIND_WARMSTART_SUPPORT \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
SHARED_TOOLCHAIN \
SORT_THREADS \
Opportunistically skip building a cross-compiler with SYSTEM_COMPILER set. This will still build the compiler for the target but will not build the bootstrap cross-compiler in the cross-tools phase. Other toolchain bootstrapping, such as elftoolchan and binutils, currently still occurs. This will utilize the default CC (cc, /usr/bin/cc) as an external compiler. This is planned to be on-by-default eventually. This will utilize the __FreeBSD_cc_version compiler macro defined in the source tree and compare it to CC's version. If they match then the cross-compiler is skipped. If [X]CC is an external compiler (absolute path) or WITHOUT_CROSS_COMPILER is already set, then this logic is skipped. If the expected bootstrap compiler type no longer matches the found CC compiler type (clang vs gcc), then the logic is skipped. As an extra safety check the version number is also compared from the compiler to the tree version. Clang: The macro FREEBSD_CC_VERSION is defined in: lib/clang/include/clang/Basic/Version.inc For clang -target will be used if TARGET_ARCH != MACHINE_ARCH. This is from the current external toolchain logic. There is currently an assumption that the host compiler can build the TARGET_ARCH. This will usually be the case since we don't conditionalize target arch support in clang, but it will break when introducing new architectures. This problem is mitigated by incrementing the version when adding new architectures. GCC: The macro FBSD_CC_VER is defined in: gnu/usr.bin/cc/cc_tools/freebsd-native.h For GCC there is no simple -target support when TARGET_ARCH != MACHINE_ARCH. In this case the opportunistic skip is not done. If we add proper support for this case in external toolchain logic then it will be fine to enable. This relies on the macros being incremented whenever any change occurs to these compilers that warrant rebuilding files. It also should never repeat earlier values. Reviewed by: brooks, bapt, imp Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D6357
2016-05-21 01:32:23 +00:00
SVN \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
#
# Default behaviour of some options depends on the architecture. Unfortunately
# this means that we have to test TARGET_ARCH (the buildworld case) as well
# as MACHINE_ARCH (the non-buildworld case). Normally TARGET_ARCH is not
# used at all in bsd.*.mk, but we have to make an exception here if we want
# to allow defaults for some things like clang to vary by target architecture.
# Additional, per-target behavior should be rarely added only after much
# gnashing of teeth and grinding of gears.
#
.if defined(TARGET_ARCH)
__T=${TARGET_ARCH}
.else
__T=${MACHINE_ARCH}
.endif
.if defined(TARGET)
__TT=${TARGET}
.else
__TT=${MACHINE}
.endif
Since clang 3.5.0 and later must be built by a compiler with C++11 support, make this explicit in src.opts.mk, by updating the default settings. The defaults become as follows: * If the host compiler is not C++11 capable, use gcc and disable clang. * On x86, enable clang, make it the default cc, and disable gcc. * On little-endian ARM, enable clang, but not the full build, make it the default cc, and disable gcc. * On PowerPC, enable clang, but enable gcc and make that the default cc. * On everything else, use gcc, and disable clang. This can be amended later, if we get e.g. sparc64 or big-endian ARM working with clang. Reviewed by: imp, brooks Differential Revision: https://reviews.freebsd.org/D1294
2014-12-10 22:33:57 +00:00
.include <bsd.compiler.mk>
Slightly rework the comments and logic for default Clang/GCC. This is because the previous version was very obscure about the fact that despite having Clang "on by default" for architectures such as powerpc, it does not actually build due to the GCC it uses not having C++11 support. Using an external compiler that supports C++11 does allow this to work. This whole block should be rethought more given "on by default" is not really default without extra work which could actually be surprising for why Clang is showing up when using a newer GCC. Sponsored by: EMC / Isilon Storage Division
2015-10-24 04:03:32 +00:00
# If the compiler is not C++11 capable, disable Clang and use GCC instead.
# This means that architectures that have GCC 4.2 as default can not
# build Clang without using an external compiler.
.if ${COMPILER_FEATURES:Mc++11} && (${__T} == "aarch64" || \
${__T} == "amd64" || ${__TT} == "arm" || ${__T} == "i386")
# Clang is enabled, and will be installed as the default /usr/bin/cc.
Enable LLD (as ld.lld) on i386 and arm With this change LLD will be built on the same set of architectures that use Clang as /usr/bin/cc. It is not yet fully functional as a system linker for i386 and arm, but is ready for further testing and investigation.
2017-01-26 02:22:23 +00:00
__DEFAULT_YES_OPTIONS+=CLANG CLANG_BOOTSTRAP CLANG_FULL CLANG_IS_CC LLD
Fall back to GPL dtc(1) when we lack a C++11 compiler The BSD licensed device tree compiler is written in C++11. Reported by: jhibbits Reviewed by: jhibbits, manu Sponsored by: The FreeBSD Foundation
2017-06-20 15:51:09 +00:00
__DEFAULT_NO_OPTIONS+=GCC GCC_BOOTSTRAP GNUCXX GPL_DTC
Do not build clang for all riscv*, not just riscv64 Previous test matching on "riscv64" was invalidated by the addition of riscv64sf. Sponsored by: The FreeBSD Foundation
2017-07-01 19:10:59 +00:00
.elif ${COMPILER_FEATURES:Mc++11} && ${__T:Mriscv*} == "" && ${__T} != "sparc64"
Build Clang on all architectures if host compiler is C++11 Recent versions of Clang are becoming usable for non-x86 non-arm FreeBSD architectures. If the compiler is capable of building Clang, do so in order to facilitate further testing. Reviewed by: dim, imp Relnotes: Yes Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D8267
2017-01-25 20:33:31 +00:00
# If an external compiler that supports C++11 is used as ${CC} and Clang
# supports the target, then Clang is enabled but GCC is installed as the
# default /usr/bin/cc.
Since clang 3.5.0 and later must be built by a compiler with C++11 support, make this explicit in src.opts.mk, by updating the default settings. The defaults become as follows: * If the host compiler is not C++11 capable, use gcc and disable clang. * On x86, enable clang, make it the default cc, and disable gcc. * On little-endian ARM, enable clang, but not the full build, make it the default cc, and disable gcc. * On PowerPC, enable clang, but enable gcc and make that the default cc. * On everything else, use gcc, and disable clang. This can be amended later, if we get e.g. sparc64 or big-endian ARM working with clang. Reviewed by: imp, brooks Differential Revision: https://reviews.freebsd.org/D1294
2014-12-10 22:33:57 +00:00
__DEFAULT_YES_OPTIONS+=CLANG CLANG_FULL GCC GCC_BOOTSTRAP GNUCXX
Fall back to GPL dtc(1) when we lack a C++11 compiler The BSD licensed device tree compiler is written in C++11. Reported by: jhibbits Reviewed by: jhibbits, manu Sponsored by: The FreeBSD Foundation
2017-06-20 15:51:09 +00:00
__DEFAULT_NO_OPTIONS+=CLANG_BOOTSTRAP CLANG_IS_CC GPL_DTC LLD
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
.else
Slightly rework the comments and logic for default Clang/GCC. This is because the previous version was very obscure about the fact that despite having Clang "on by default" for architectures such as powerpc, it does not actually build due to the GCC it uses not having C++11 support. Using an external compiler that supports C++11 does allow this to work. This whole block should be rethought more given "on by default" is not really default without extra work which could actually be surprising for why Clang is showing up when using a newer GCC. Sponsored by: EMC / Isilon Storage Division
2015-10-24 04:03:32 +00:00
# Everything else disables Clang, and uses GCC instead.
Fall back to GPL dtc(1) when we lack a C++11 compiler The BSD licensed device tree compiler is written in C++11. Reported by: jhibbits Reviewed by: jhibbits, manu Sponsored by: The FreeBSD Foundation
2017-06-20 15:51:09 +00:00
__DEFAULT_YES_OPTIONS+=GCC GCC_BOOTSTRAP GNUCXX GPL_DTC
Enable LLD (as ld.lld) on i386 and arm With this change LLD will be built on the same set of architectures that use Clang as /usr/bin/cc. It is not yet fully functional as a system linker for i386 and arm, but is ready for further testing and investigation.
2017-01-26 02:22:23 +00:00
__DEFAULT_NO_OPTIONS+=CLANG CLANG_BOOTSTRAP CLANG_FULL CLANG_IS_CC LLD
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
.endif
Add comment explaining aarch64's BROKEN_OPTIONS In-tree bintuils and GCC do not support aarch64 or other recent architectures.
2015-12-08 19:19:26 +00:00
# In-tree binutils/gcc are older versions without modern architecture support.
Add full softfloat and hardfloat support for RISC-V. Hardfloat is now default (use riscv64sf as TARGET_ARCH for softfloat). Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D8529
2016-11-16 15:21:32 +00:00
.if ${__T} == "aarch64" || ${__T:Mriscv*} != ""
Followup to r282083: add GCC_BOOTSTRAP to the list of broken options on arm64 Differential Revision: https://reviews.freebsd.org/D2379 Reviewed by: imp
2015-04-28 19:15:28 +00:00
BROKEN_OPTIONS+=BINUTILS BINUTILS_BOOTSTRAP GCC GCC_BOOTSTRAP GDB
Start to import support for the AArch64 architecture from ARM. This change only adds support for kernel-toolchain, however it is expected further changes to add kernel and userland support will be committed as they are reviewed. As our copy of binutils is too old the devel/aarch64-binutils port needs to be installed to pull in a linker. To build either TARGET needs to be set to arm64, or TARGET_ARCH set to aarch64. The latter is set so uname -p will return aarch64 as existing third party software expects this. Differential Revision: https://reviews.freebsd.org/D2005 Relnotes: Yes Sponsored by: The FreeBSD Foundation
2015-03-19 13:53:47 +00:00
.endif
Add full softfloat and hardfloat support for RISC-V. Hardfloat is now default (use riscv64sf as TARGET_ARCH for softfloat). Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D8529
2016-11-16 15:21:32 +00:00
.if ${__T:Mriscv*} != ""
Start support for the RISC-V 64-bit architecture developed by UC Berkeley. RISC-V is a new ISA designed to support computer research and education, and is now become a standard open architecture for industry implementations. This is a minimal set of changes required to run 'make kernel-toolchain' using external (GNU) toolchain. The FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv. Reviewed by: andrew, bdrewery, emaste, imp Sponsored by: DARPA, AFRL Sponsored by: HEIF5 Differential Revision: https://reviews.freebsd.org/D4445
2015-12-11 22:55:23 +00:00
BROKEN_OPTIONS+=PROFILE # "sorry, unimplemented: profiler support for RISC-V"
BROKEN_OPTIONS+=TESTS # "undefined reference to `_Unwind_Resume'"
BROKEN_OPTIONS+=CXX # "libcxxrt.so: undefined reference to `_Unwind_Resume_or_Rethrow'"
.endif
Enable LLVM libunwind by default on amd64 and i386 It is a maintained and updated runtime exception stack unwinder that should be a drop-in replacement. It can be disabled by setting WITHOUT_LLVM_LIBUNWIND in src.conf. PR: 206039 [exp-run] Sponsored by: The FreeBSD Foundation
2016-07-27 16:01:44 +00:00
.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" || \
Add full softfloat and hardfloat support for RISC-V. Hardfloat is now default (use riscv64sf as TARGET_ARCH for softfloat). Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D8529
2016-11-16 15:21:32 +00:00
${__T:Mriscv*} != ""
Enable LLVM libunwind by default on amd64 and i386 It is a maintained and updated runtime exception stack unwinder that should be a drop-in replacement. It can be disabled by setting WITHOUT_LLVM_LIBUNWIND in src.conf. PR: 206039 [exp-run] Sponsored by: The FreeBSD Foundation
2016-07-27 16:01:44 +00:00
__DEFAULT_YES_OPTIONS+=LLVM_LIBUNWIND
.else
__DEFAULT_NO_OPTIONS+=LLVM_LIBUNWIND
.endif
Add WITH_LLD_AS_LD build knob If set it installs LLD as /usr/bin/ld. LLD (as of version 3.9) is not capable of linking the world and kernel, but can self-host and link many substantial applications. GNU ld continues to be used for the world and kernel build, regardless of how this knob is set. It is on by default for arm64, and off for all other CPU architectures. Sponsored by: The FreeBSD Foundation
2016-11-25 13:15:28 +00:00
.if ${__T} == "aarch64"
Introduce LLD_BOOTSTRAP to control lld as bootstrap linker Add WITH_LLD_BOOTSTRAP and WITHOUT_LLD_BOOTSTRAP knobs, similar to the Clang bootstrap knobs. Reviewed by: dim Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D10249
2017-04-09 01:35:19 +00:00
__DEFAULT_YES_OPTIONS+=LLD_BOOTSTRAP LLD_IS_LD
Add WITH_LLD_AS_LD build knob If set it installs LLD as /usr/bin/ld. LLD (as of version 3.9) is not capable of linking the world and kernel, but can self-host and link many substantial applications. GNU ld continues to be used for the world and kernel build, regardless of how this knob is set. It is on by default for arm64, and off for all other CPU architectures. Sponsored by: The FreeBSD Foundation
2016-11-25 13:15:28 +00:00
.else
Introduce LLD_BOOTSTRAP to control lld as bootstrap linker Add WITH_LLD_BOOTSTRAP and WITHOUT_LLD_BOOTSTRAP knobs, similar to the Clang bootstrap knobs. Reviewed by: dim Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D10249
2017-04-09 01:35:19 +00:00
__DEFAULT_NO_OPTIONS+=LLD_BOOTSTRAP LLD_IS_LD
Add WITH_LLD_AS_LD build knob If set it installs LLD as /usr/bin/ld. LLD (as of version 3.9) is not capable of linking the world and kernel, but can self-host and link many substantial applications. GNU ld continues to be used for the world and kernel build, regardless of how this knob is set. It is on by default for arm64, and off for all other CPU architectures. Sponsored by: The FreeBSD Foundation
2016-11-25 13:15:28 +00:00
.endif
Enable LLDB by default on amd64 and arm64 LLDB is usable for userland core file and live debugging on amd64, and for userland core file debugging on arm64. In general it works at least as well on FreeBSD as our in-tree gdb version, so enable it by default to allow for broader use and testing. An LLDB tutorial is available at http://lldb.llvm.org/tutorial.html, and a table mapping GDB commands to LLDB commands can be found at http://lldb.llvm.org/lldb-gdb.html . LLDB also has some level of support for FreeBSD on arm, mips, i386, and powerpc, but is not yet ready to have them enabled by default. Reviewed by: gnn Relnotes: Yes
2015-12-16 19:23:10 +00:00
.if ${__T} == "aarch64" || ${__T} == "amd64"
Enable LLD (as ld.lld) on i386 and arm With this change LLD will be built on the same set of architectures that use Clang as /usr/bin/cc. It is not yet fully functional as a system linker for i386 and arm, but is ready for further testing and investigation.
2017-01-26 02:22:23 +00:00
__DEFAULT_YES_OPTIONS+=LLDB
Enable LLDB by default on amd64 and arm64 LLDB is usable for userland core file and live debugging on amd64, and for userland core file debugging on arm64. In general it works at least as well on FreeBSD as our in-tree gdb version, so enable it by default to allow for broader use and testing. An LLDB tutorial is available at http://lldb.llvm.org/tutorial.html, and a table mapping GDB commands to LLDB commands can be found at http://lldb.llvm.org/lldb-gdb.html . LLDB also has some level of support for FreeBSD on arm, mips, i386, and powerpc, but is not yet ready to have them enabled by default. Reviewed by: gnn Relnotes: Yes
2015-12-16 19:23:10 +00:00
.else
Enable LLD (as ld.lld) on i386 and arm With this change LLD will be built on the same set of architectures that use Clang as /usr/bin/cc. It is not yet fully functional as a system linker for i386 and arm, but is ready for further testing and investigation.
2017-01-26 02:22:23 +00:00
__DEFAULT_NO_OPTIONS+=LLDB
Enable LLDB by default on amd64 and arm64 LLDB is usable for userland core file and live debugging on amd64, and for userland core file debugging on arm64. In general it works at least as well on FreeBSD as our in-tree gdb version, so enable it by default to allow for broader use and testing. An LLDB tutorial is available at http://lldb.llvm.org/tutorial.html, and a table mapping GDB commands to LLDB commands can be found at http://lldb.llvm.org/lldb-gdb.html . LLDB also has some level of support for FreeBSD on arm, mips, i386, and powerpc, but is not yet ready to have them enabled by default. Reviewed by: gnn Relnotes: Yes
2015-12-16 19:23:10 +00:00
.endif
Add LLDB to BROKEN_OPTIONS for arm prior to armv6 LLVM lacks support on FreeBSD for ARMv4/ARMv5 64-bit atomic operations. Sponsored by: The FreeBSD Foundation
2015-04-24 22:04:59 +00:00
# LLVM lacks support for FreeBSD 64-bit atomic operations for ARMv4/ARMv5
.if ${__T} == "arm" || ${__T} == "armeb"
BROKEN_OPTIONS+=LLDB
.endif
Disable in-tree GDB by default on x86, mips, and powerpc. GDB in ports contains all of the functionality as GDB in base (including kgdb) for these platforms along with additional functionality. In-tree GDB remains enabled on ARM and sparc64. GDB in ports does not currently support kernel debugging on arm, and ports GDB for sparc64 has not been tested (though it does include sparc64 support). Reviewed by: bdrewery, emaste, imp Relnotes: yes Sponsored by: DARPA / AFRL Differential Revision: https://reviews.freebsd.org/D10399
2017-04-18 16:27:48 +00:00
# GDB in base is generally less functional than GDB in ports. Ports GDB
# does not yet contain kernel support for arm, and sparc64 kernel support
# has not been tested.
.if ${__T:Marm*} != "" || ${__T} == "sparc64"
Add a new GDB_LIBEXEC option to install gdb and kgdb to /usr/libexec. When this option is enabled, only gdb and kgdb are installed to /usr/libexec for use by crashinfo(8). Other bits of GDB such as gdbserver and gdbtui are not installed. For this option to be effective, GDB must be enabled. Rework r317094 to re-enable GDB on all platforms but enable GDB_LIBEXEC on platforms for which the GDB in ports is a superset of functionality. Reviewed by: emaste, kib Suggested by: kib Relnotes: yes Differential Revision: https://reviews.freebsd.org/D10449
2017-04-25 18:08:56 +00:00
__DEFAULT_NO_OPTIONS+=GDB_LIBEXEC
Disable in-tree GDB by default on x86, mips, and powerpc. GDB in ports contains all of the functionality as GDB in base (including kgdb) for these platforms along with additional functionality. In-tree GDB remains enabled on ARM and sparc64. GDB in ports does not currently support kernel debugging on arm, and ports GDB for sparc64 has not been tested (though it does include sparc64 support). Reviewed by: bdrewery, emaste, imp Relnotes: yes Sponsored by: DARPA / AFRL Differential Revision: https://reviews.freebsd.org/D10399
2017-04-18 16:27:48 +00:00
.else
Add a new GDB_LIBEXEC option to install gdb and kgdb to /usr/libexec. When this option is enabled, only gdb and kgdb are installed to /usr/libexec for use by crashinfo(8). Other bits of GDB such as gdbserver and gdbtui are not installed. For this option to be effective, GDB must be enabled. Rework r317094 to re-enable GDB on all platforms but enable GDB_LIBEXEC on platforms for which the GDB in ports is a superset of functionality. Reviewed by: emaste, kib Suggested by: kib Relnotes: yes Differential Revision: https://reviews.freebsd.org/D10449
2017-04-25 18:08:56 +00:00
__DEFAULT_YES_OPTIONS+=GDB_LIBEXEC
Disable in-tree GDB by default on x86, mips, and powerpc. GDB in ports contains all of the functionality as GDB in base (including kgdb) for these platforms along with additional functionality. In-tree GDB remains enabled on ARM and sparc64. GDB in ports does not currently support kernel debugging on arm, and ports GDB for sparc64 has not been tested (though it does include sparc64 support). Reviewed by: bdrewery, emaste, imp Relnotes: yes Sponsored by: DARPA / AFRL Differential Revision: https://reviews.freebsd.org/D10399
2017-04-18 16:27:48 +00:00
.endif
Add new LIBSOFT option. This is similar to the LIB32 option, except for libraries that follow the soft float ABI. It's only supported on armv6 as a transition to the new hard float ABI, so mark as broken everywhere else.
2016-01-03 04:32:04 +00:00
# Only doing soft float API stuff on armv6
.if ${__T} != "armv6"
BROKEN_OPTIONS+=LIBSOFT
.endif
SSP is broken on all mips.
2016-09-29 13:38:14 +00:00
.if ${__T:Mmips*}
Mark SSP broken on MIPS. Sponsored by: DARPA, AFRL Sponsored by: HEIF5
2016-09-27 09:44:30 +00:00
BROKEN_OPTIONS+=SSP
.endif
Create libefivar library. This library aims to provide the same API as the GPL'd version of this library. It implements the common Linux API for programatically manipulating UEFI environment varibales using the UEFI Runtime Services the kernel provides. It replaces the old efi library since it is programmed to a different interface, but retails the CHAR16 to UTF-8 and vice versa conversion routines. The new name is to match Linux program's expectations. Differential Revision: https://reviews.freebsd.org/D8128 Reviewed by: kib@, wblock@, Ganael Laplanche
2016-10-11 22:30:41 +00:00
.if ${__T:Mmips*} || ${__T:Mpowerpc*} || ${__T:Msparc64} || ${__T:Mriscv*}
BROKEN_OPTIONS+=EFI
.endif
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
Add cxgbetool(8) to the base system. Move cxgbetool from tools/tools to usr.sbin. Compile and install it on platforms where cxgbe(4) is built by default. Knobs (WITH_CXGBETOOL and WITHOUT_CXGBETOOL) have been added so that the user can override the default setting. Reviewed by: ngie@, gnn@, bdrewery@ MFC after: 1 month Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D9854
2017-03-03 03:11:58 +00:00
.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" || \
${__T} == "powerpc64" || ${__T} == "sparc64"
__DEFAULT_YES_OPTIONS+=CXGBETOOL
.else
__DEFAULT_NO_OPTIONS+=CXGBETOOL
.endif
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
.include <bsd.mkopt.mk>
#
# MK_* options that default to "yes" if the compiler is a C++11 compiler.
#
.for var in \
LIBCPLUSPLUS
.if !defined(MK_${var})
.if ${COMPILER_FEATURES:Mc++11}
.if defined(WITHOUT_${var})
MK_${var}:= no
.else
MK_${var}:= yes
.endif
.else
.if defined(WITH_${var})
MK_${var}:= yes
.else
MK_${var}:= no
.endif
.endif
.endif
.endfor
#
# Force some options off if their dependencies are off.
# Order is somewhat important.
#
Force LLVM_LIBUNWIND off if we don't have a C++11 compiler Tested by: bde Differential Revision: https://reviews.freebsd.org/D7746
2016-09-23 13:21:29 +00:00
.if !${COMPILER_FEATURES:Mc++11}
MK_LLVM_LIBUNWIND:= no
.endif
Force MK_GDB to no if MK_BINUTILS == no This is currently encoded in conditional blocks in gnu/lib/Makefile and gnu/usr.bin/Makefile. Set it via src.opts.mk to make GDB's dependency on binutils more clear.
2016-10-19 19:57:36 +00:00
.if ${MK_BINUTILS} == "no"
MK_GDB:= no
.endif
Make WITHOUT_CAPSICUM implying WITHOUT_CASPER PR: 214562 Reported by: dewayne@heuristicsystems.com.au MFC after: 2 days
2016-12-10 13:29:51 +00:00
.if ${MK_CAPSICUM} == "no"
MK_CASPER:= no
.endif
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
.if ${MK_LIBPTHREAD} == "no"
MK_LIBTHR:= no
.endif
.if ${MK_LDNS} == "no"
MK_LDNS_UTILS:= no
MK_UNBOUND:= no
.endif
.if ${MK_SOURCELESS} == "no"
MK_SOURCELESS_HOST:= no
MK_SOURCELESS_UCODE:= no
.endif
.if ${MK_CDDL} == "no"
MK_ZFS:= no
MK_CTF:= no
.endif
.if ${MK_CRYPT} == "no"
MK_OPENSSL:= no
MK_OPENSSH:= no
MK_KERBEROS:= no
.endif
.if ${MK_CXX} == "no"
MK_CLANG:= no
Make MK_GNUCXX mean "build the libstdc++ and libsupc++ libraries" and nothing more. Force it to be "no" when MK_CXX is "no" to simplify usage. It no longer also means "build g++" since we no longer have a platform where that's interesting now that pc98 no longer needs clang and gcc, but not g++. pc98 now just uses clang after boot2 changes.
2014-07-10 21:11:48 +00:00
MK_GNUCXX:= no
Forcibly disable MK_TESTS if building without C++ Several atf components require C++, and the test suite is not usable if building WITHOUT_CXX. Reviewed by: bdrewery, jmmv Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D7597
2016-08-22 17:45:30 +00:00
MK_TESTS:= no
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
.endif
Add a WITHOUT_DIALOG src.conf(5) knob It also turns off dependencies (bsdinstall, bsdconfig, dpv, tzsetup). Reviewed by: dteske Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D7969
2016-09-27 18:08:38 +00:00
.if ${MK_DIALOG} == "no"
MK_BSDINSTALL:= no
.endif
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
.if ${MK_MAIL} == "no"
MK_MAILWRAPPER:= no
MK_SENDMAIL:= no
MK_DMAGENT:= no
.endif
.if ${MK_NETGRAPH} == "no"
MK_ATM:= no
MK_BLUETOOTH:= no
.endif
.if ${MK_OPENSSL} == "no"
MK_OPENSSH:= no
MK_KERBEROS:= no
.endif
.if ${MK_PF} == "no"
MK_AUTHPF:= no
.endif
Add a src.conf option to build and install the DTrace test suite. Reviewed by: gnn, ngie Differential Revision: https://reviews.freebsd.org/D3195
2015-08-02 00:37:33 +00:00
.if ${MK_TESTS} == "no"
MK_DTRACE_TESTS:= no
.endif
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
.if ${MK_CROSS_COMPILER} == "no"
MK_BINUTILS_BOOTSTRAP:= no
MK_CLANG_BOOTSTRAP:= no
Separate ELFTOOLCHAIN_BOOTSTRAP from BINUTILS_BOOTSTRAP For most cases they are equivalent, but BINUTILS_BOOTSTRAP is a BROKEN_OPTION on arm64 as the in-tree GNU binutils do not support it, so we need a separate internal flag for ELF Tool Chain. Reviewed by: andrew, brooks Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D3381
2015-08-17 10:48:55 +00:00
MK_ELFTOOLCHAIN_BOOTSTRAP:= no
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
MK_GCC_BOOTSTRAP:= no
.endif
.if ${MK_TOOLCHAIN} == "no"
MK_BINUTILS:= no
MK_CLANG:= no
MK_GCC:= no
MK_GDB:= no
Acutally, replaces NO_INCS with WITHOUT_INCLUDES and make WITHOUT_TOOLCHAIN imply it instead. Sponsored by: Netflix
2014-11-18 17:06:44 +00:00
MK_INCLUDES:= no
Make WITHOUT_TOOLCHAIN imply WITHOUT_LLD. LLD is a toolchain component.
2017-04-10 18:21:30 +00:00
MK_LLD:= no
WITHOUT_TOOLCHAIN: Also exclude LLDB. Sponsored by: EMC / Isilon Storage Division
2016-03-25 22:36:29 +00:00
MK_LLDB:= no
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
.endif
.if ${MK_CLANG} == "no"
MK_CLANG_EXTRAS:= no
MK_CLANG_FULL:= no
.endif
Move the "MK_* options..." section before the "... MK_*_SUPPORT..." section For the case that someone set WITHOUT_GSSAPI=, now WITHOUT_KERBEROS_SUPPORT will be properly set. This will likely fix the issue for the default case noted in the PR I filed back in 2011. I am trying to fix the less obvious case documented in the PR still. MFC after: 2 weeks PR: 159745
2017-01-02 19:55:18 +00:00
#
# MK_* options whose default value depends on another option.
#
.for vv in \
GSSAPI/KERBEROS \
MAN_UTILS/MAN
.if defined(WITH_${vv:H})
MK_${vv:H}:= yes
.elif defined(WITHOUT_${vv:H})
MK_${vv:H}:= no
.else
MK_${vv:H}:= ${MK_${vv:T}}
.endif
.endfor
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
#
# Set defaults for the MK_*_SUPPORT variables.
#
#
# MK_*_SUPPORT options which default to "yes" unless their corresponding
# MK_* variable is set to "no".
#
.for var in \
Add basic blacklist build support Reviewed by: rpaulo Approved by: rpaulo Relnotes: YES Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D5913
2016-06-02 19:06:04 +00:00
BLACKLIST \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
BZIP2 \
INET \
INET6 \
KERBEROS \
KVM \
NETGRAPH \
PAM \
My previous commit exposed an issue as it fixed a different issue. lib/atf isn't a prereq_lib, since it isn't required for other libraries to build. Remove it. The old kludge of always building it had effectively been retired. Since we don't want to build the libraries with the tests when we're bootstrapping, invent MK_TESTS_SUPPORT which normally defaults to the current MK_TESTS value, except when explicitly defined. Make lib/atf depend on it being yes. When building the libraries set MK_TESTS to no, and MK_TESTS_SUPPORT to the current value of MK_TESTS so that later stages of the build work correctly. This should fix (and does for me) people's issues with parallel builds racing between lib/atf and libexec/atf. Since lib/atf is built during the libraries phase, the race disappears.
2014-10-22 03:39:11 +00:00
TESTS \
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
WIRELESS
.if defined(WITHOUT_${var}_SUPPORT) || ${MK_${var}} == "no"
MK_${var}_SUPPORT:= no
.else
MK_${var}_SUPPORT:= yes
.endif
.endfor
.if !${COMPILER_FEATURES:Mc++11}
MK_LLDB:= no
.endif
Always use libc++ as the default c++ stack when building with an external gcc 4.8+ While here disable building gcc from base when using gcc 4.8+ Reviewed by: imp
2014-10-21 20:00:49 +00:00
# gcc 4.8 and newer supports libc++, so suppress gnuc++ in that case.
# while in theory we could build it with that, we don't want to do
# that since it creates too much confusion for too little gain.
Fix native powerpc64 build of lib32 with in-tree GCC. - This was broken by r300350 and r300885. - Add some comments around the external GCC logic since it is spread out and in need of some cleanup. - The problem was that X_COMPILER_TYPE is always defined from CC->XCC's default, so if /usr/bin/cc is GCC (as it is on native powerpc64) then X_COMPILER_TYPE was getting GCC and triggering the external logic in Makefile.libcompat. It was intended to always provide -isystem with GCC since --sysroot is used into the lib32 sysroot which won't modify the header path without the -isystem. The use of the libc++/std=c++11 override was only intended to be used for external compilers though (more accurately GCC 4.8+ but that's a separate assumption to cleanup). Apply the same logic from Makefile.inc1 to Makefile.libcompat to only add the libc++ override when needed for external compilers. Pointyhat to: bdrewery Tested with: native ppc64 (swills), universe, ppc64 xtoolchain, amd64 xtoolchain, sparc64 cross-build of ppc64 (host GCC 4.2) Reported by: andreast, swills Approved by: re (gjb) Sponsored by: EMC / Isilon Storage Division
2016-06-15 23:58:03 +00:00
# XXX: This is incomplete and needs X_COMPILER_TYPE/VERSION checks too
# to prevent Makefile.inc1 from bootstrapping unneeded dependencies
# and to support 'make delete-old' when supplying an external toolchain.
Always use libc++ as the default c++ stack when building with an external gcc 4.8+ While here disable building gcc from base when using gcc 4.8+ Reviewed by: imp
2014-10-21 20:00:49 +00:00
.if ${COMPILER_TYPE} == "gcc" && ${COMPILER_VERSION} >= 40800
MK_GNUCXX:=no
MK_GCC:=no
Move the /usr/src specific options to src.opts.mk. Move inclusion of /etc/src.conf to this file as well. Now, it will only affect builds of /usr/src and not others that use the bsd.*.mk files. Specifically don't install src.opts.mk so we can catch when it 'leaks' into bsd.*.mk again and have there be errors when this happens. Future commits will move to including src.opts.mk instead of bsd.own.mk when all that's needed is one of the MK_FOO options from src.opts.mk. Future options should be placed here, unless they directly affect a bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
2014-05-06 04:21:48 +00:00
.endif
Always use libc++ as the default c++ stack when building with an external gcc 4.8+ While here disable building gcc from base when using gcc 4.8+ Reviewed by: imp
2014-10-21 20:00:49 +00:00
.endif # !target(__<src.opts.mk>__)
Reference in New Issue Copy Permalink