freebsd-skq/sbin/dumpon/dumpon.c

602 lines
15 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1980, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if 0
#ifndef lint
static const char copyright[] =
"@(#) Copyright (c) 1980, 1993\n\
The Regents of the University of California. All rights reserved.\n";
#endif /* not lint */
#ifndef lint
static char sccsid[] = "From: @(#)swapon.c 8.1 (Berkeley) 6/5/93";
#endif /* not lint */
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
#include <sys/capsicum.h>
#include <sys/disk.h>
#include <sys/socket.h>
#include <sys/sysctl.h>
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
#include <assert.h>
#include <capsicum_helpers.h>
#include <err.h>
#include <errno.h>
#include <fcntl.h>
#include <ifaddrs.h>
#include <netdb.h>
#include <paths.h>
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sysexits.h>
#include <unistd.h>
#include <arpa/inet.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/route.h>
#include <netinet/in.h>
#include <netinet/netdump/netdump.h>
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
#ifdef HAVE_CRYPTO
#include <openssl/err.h>
#include <openssl/pem.h>
#include <openssl/rand.h>
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
#include <openssl/rsa.h>
#endif
static int verbose;
static void _Noreturn
usage(void)
{
fprintf(stderr,
"usage: dumpon [-i index] [-r] [-v] [-k <pubkey>] [-Zz] <device>\n"
" dumpon [-i index] [-r] [-v] [-k <pubkey>] [-Zz]\n"
" [-g <gateway>] -s <server> -c <client> <iface>\n"
" dumpon [-v] off\n"
" dumpon [-v] -l\n");
exit(EX_USAGE);
}
/*
* Look for a default route on the specified interface.
*/
static char *
find_gateway(const char *ifname)
{
struct ifaddrs *ifa, *ifap;
struct rt_msghdr *rtm;
struct sockaddr *sa;
struct sockaddr_dl *sdl;
struct sockaddr_in *dst, *mask, *gw;
char *buf, *next, *ret;
size_t sz;
int error, i, ifindex, mib[7];
/* First look up the interface index. */
if (getifaddrs(&ifap) != 0)
err(EX_OSERR, "getifaddrs");
for (ifa = ifap; ifa != NULL; ifa = ifa->ifa_next) {
if (ifa->ifa_addr->sa_family != AF_LINK)
continue;
if (strcmp(ifa->ifa_name, ifname) == 0) {
sdl = (struct sockaddr_dl *)(void *)ifa->ifa_addr;
ifindex = sdl->sdl_index;
break;
}
}
if (ifa == NULL)
errx(1, "couldn't find interface index for '%s'", ifname);
freeifaddrs(ifap);
/* Now get the IPv4 routing table. */
mib[0] = CTL_NET;
mib[1] = PF_ROUTE;
mib[2] = 0;
mib[3] = AF_INET;
mib[4] = NET_RT_DUMP;
mib[5] = 0;
mib[6] = -1; /* FIB */
for (;;) {
if (sysctl(mib, nitems(mib), NULL, &sz, NULL, 0) != 0)
err(EX_OSERR, "sysctl(NET_RT_DUMP)");
buf = malloc(sz);
error = sysctl(mib, nitems(mib), buf, &sz, NULL, 0);
if (error == 0)
break;
if (errno != ENOMEM)
err(EX_OSERR, "sysctl(NET_RT_DUMP)");
free(buf);
}
ret = NULL;
for (next = buf; next < buf + sz; next += rtm->rtm_msglen) {
rtm = (struct rt_msghdr *)(void *)next;
if (rtm->rtm_version != RTM_VERSION)
continue;
if ((rtm->rtm_flags & RTF_GATEWAY) == 0 ||
rtm->rtm_index != ifindex)
continue;
dst = gw = mask = NULL;
sa = (struct sockaddr *)(rtm + 1);
for (i = 0; i < RTAX_MAX; i++) {
if ((rtm->rtm_addrs & (1 << i)) != 0) {
switch (i) {
case RTAX_DST:
dst = (void *)sa;
break;
case RTAX_GATEWAY:
gw = (void *)sa;
break;
case RTAX_NETMASK:
mask = (void *)sa;
break;
}
}
sa = (struct sockaddr *)((char *)sa + SA_SIZE(sa));
}
if (dst->sin_addr.s_addr == INADDR_ANY &&
mask->sin_addr.s_addr == 0) {
ret = inet_ntoa(gw->sin_addr);
break;
}
}
free(buf);
return (ret);
}
static void
check_size(int fd, const char *fn)
{
int name[] = { CTL_HW, HW_PHYSMEM };
size_t namelen = nitems(name);
unsigned long physmem;
size_t len;
off_t mediasize;
int minidump;
2006-10-31 22:36:49 +00:00
len = sizeof(minidump);
if (sysctlbyname("debug.minidump", &minidump, &len, NULL, 0) == 0 &&
minidump == 1)
return;
2006-10-31 22:36:49 +00:00
len = sizeof(physmem);
if (sysctl(name, namelen, &physmem, &len, NULL, 0) != 0)
err(EX_OSERR, "can't get memory size");
if (ioctl(fd, DIOCGMEDIASIZE, &mediasize) != 0)
err(EX_OSERR, "%s: can't get size", fn);
if ((uintmax_t)mediasize < (uintmax_t)physmem)
errx(EX_IOERR, "%s is smaller than physical memory", fn);
}
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
#ifdef HAVE_CRYPTO
static void
genkey(const char *pubkeyfile, struct diocskerneldump_arg *kdap)
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
{
FILE *fp;
RSA *pubkey;
assert(pubkeyfile != NULL);
assert(kdap != NULL);
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
fp = NULL;
pubkey = NULL;
fp = fopen(pubkeyfile, "r");
if (fp == NULL)
err(1, "Unable to open %s", pubkeyfile);
/*
* Obsolescent OpenSSL only knows about /dev/random, and needs to
* pre-seed before entering cap mode. For whatever reason,
* RSA_pub_encrypt uses the internal PRNG.
*/
#if OPENSSL_VERSION_NUMBER < 0x10100000L
{
unsigned char c[1];
RAND_bytes(c, 1);
}
#endif
if (caph_enter() < 0)
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
err(1, "Unable to enter capability mode");
pubkey = RSA_new();
if (pubkey == NULL) {
errx(1, "Unable to allocate an RSA structure: %s",
ERR_error_string(ERR_get_error(), NULL));
}
pubkey = PEM_read_RSA_PUBKEY(fp, &pubkey, NULL, NULL);
fclose(fp);
fp = NULL;
if (pubkey == NULL)
errx(1, "Unable to read data from %s.", pubkeyfile);
/*
* RSA keys under ~1024 bits are trivially factorable (2018). OpenSSL
* provides an API for RSA keys to estimate the symmetric-cipher
* "equivalent" bits of security (defined in NIST SP800-57), which as
* of this writing equates a 2048-bit RSA key to 112 symmetric cipher
* bits.
*
* Use this API as a seatbelt to avoid suggesting to users that their
* privacy is protected by encryption when the key size is insufficient
* to prevent compromise via factoring.
*
* Future work: Sanity check for weak 'e', and sanity check for absence
* of 'd' (i.e., the supplied key is a public key rather than a full
* keypair).
*/
#if OPENSSL_VERSION_NUMBER >= 0x10100000L
if (RSA_security_bits(pubkey) < 112)
#else
if (RSA_size(pubkey) * 8 < 2048)
#endif
errx(1, "Small RSA keys (you provided: %db) can be "
"factored cheaply. Please generate a larger key.",
RSA_size(pubkey) * 8);
kdap->kda_encryptedkeysize = RSA_size(pubkey);
if (kdap->kda_encryptedkeysize > KERNELDUMP_ENCKEY_MAX_SIZE) {
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
errx(1, "Public key has to be at most %db long.",
8 * KERNELDUMP_ENCKEY_MAX_SIZE);
}
kdap->kda_encryptedkey = calloc(1, kdap->kda_encryptedkeysize);
if (kdap->kda_encryptedkey == NULL)
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
err(1, "Unable to allocate encrypted key");
/*
* If no cipher was specified, choose a reasonable default.
*/
if (kdap->kda_encryption == KERNELDUMP_ENC_NONE)
kdap->kda_encryption = KERNELDUMP_ENC_CHACHA20;
else if (kdap->kda_encryption == KERNELDUMP_ENC_AES_256_CBC &&
kdap->kda_compression != KERNELDUMP_COMP_NONE)
errx(EX_USAGE, "Unpadded AES256-CBC mode cannot be used "
"with compression.");
arc4random_buf(kdap->kda_key, sizeof(kdap->kda_key));
if (RSA_public_encrypt(sizeof(kdap->kda_key), kdap->kda_key,
kdap->kda_encryptedkey, pubkey,
RSA_PKCS1_OAEP_PADDING) != (int)kdap->kda_encryptedkeysize) {
errx(1, "Unable to encrypt the one-time key: %s",
ERR_error_string(ERR_get_error(), NULL));
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
}
RSA_free(pubkey);
}
#endif
static void
listdumpdev(void)
{
static char ip[200];
char dumpdev[PATH_MAX];
struct diocskerneldump_arg ndconf;
size_t len;
const char *sysctlname = "kern.shutdown.dumpdevname";
int fd;
len = sizeof(dumpdev);
if (sysctlbyname(sysctlname, &dumpdev, &len, NULL, 0) != 0) {
if (errno == ENOMEM) {
err(EX_OSERR, "Kernel returned too large of a buffer for '%s'\n",
sysctlname);
} else {
err(EX_OSERR, "Sysctl get '%s'\n", sysctlname);
}
}
if (strlen(dumpdev) == 0)
(void)strlcpy(dumpdev, _PATH_DEVNULL, sizeof(dumpdev));
if (verbose) {
char *ctx, *dd;
unsigned idx;
printf("kernel dumps on priority: device\n");
idx = 0;
ctx = dumpdev;
while ((dd = strsep(&ctx, ",")) != NULL)
printf("%u: %s\n", idx++, dd);
} else
printf("%s\n", dumpdev);
/* If netdump is enabled, print the configuration parameters. */
if (verbose) {
fd = open(_PATH_NETDUMP, O_RDONLY);
if (fd < 0) {
if (errno != ENOENT)
err(EX_OSERR, "opening %s", _PATH_NETDUMP);
return;
}
if (ioctl(fd, DIOCGKERNELDUMP, &ndconf) != 0) {
if (errno != ENXIO)
err(EX_OSERR, "ioctl(DIOCGKERNELDUMP)");
(void)close(fd);
return;
}
printf("server address: %s\n",
inet_ntop(ndconf.kda_af, &ndconf.kda_server, ip,
sizeof(ip)));
printf("client address: %s\n",
inet_ntop(ndconf.kda_af, &ndconf.kda_client, ip,
sizeof(ip)));
printf("gateway address: %s\n",
inet_ntop(ndconf.kda_af, &ndconf.kda_gateway, ip,
sizeof(ip)));
(void)close(fd);
}
}
static int
opendumpdev(const char *arg, char *dumpdev)
{
int fd, i;
if (strncmp(arg, _PATH_DEV, sizeof(_PATH_DEV) - 1) == 0)
strlcpy(dumpdev, arg, PATH_MAX);
else {
i = snprintf(dumpdev, PATH_MAX, "%s%s", _PATH_DEV, arg);
if (i < 0)
err(EX_OSERR, "%s", arg);
if (i >= PATH_MAX)
errc(EX_DATAERR, EINVAL, "%s", arg);
}
fd = open(dumpdev, O_RDONLY);
if (fd < 0)
err(EX_OSFILE, "%s", dumpdev);
return (fd);
}
int
main(int argc, char *argv[])
{
char dumpdev[PATH_MAX];
struct diocskerneldump_arg ndconf, *kdap;
struct addrinfo hints, *res;
const char *dev, *pubkeyfile, *server, *client, *gateway;
int ch, error, fd, cipher;
bool gzip, list, netdump, zstd, insert, rflag;
uint8_t ins_idx;
gzip = list = netdump = zstd = insert = rflag = false;
kdap = NULL;
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
pubkeyfile = NULL;
server = client = gateway = NULL;
ins_idx = KDA_APPEND;
cipher = KERNELDUMP_ENC_NONE;
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
while ((ch = getopt(argc, argv, "C:c:g:i:k:lrs:vZz")) != -1)
switch ((char)ch) {
case 'C':
if (strcasecmp(optarg, "chacha") == 0 ||
strcasecmp(optarg, "chacha20") == 0)
cipher = KERNELDUMP_ENC_CHACHA20;
else if (strcasecmp(optarg, "aes-cbc") == 0 ||
strcasecmp(optarg, "aes256-cbc") == 0)
cipher = KERNELDUMP_ENC_AES_256_CBC;
else
errx(EX_USAGE, "Unrecognized cipher algorithm "
"'%s'", optarg);
break;
case 'c':
client = optarg;
break;
case 'g':
gateway = optarg;
break;
case 'i':
{
int i;
i = atoi(optarg);
if (i < 0 || i >= KDA_APPEND - 1)
errx(EX_USAGE,
"-i index must be between zero and %d.",
(int)KDA_APPEND - 2);
insert = true;
ins_idx = i;
}
break;
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
case 'k':
pubkeyfile = optarg;
break;
case 'l':
list = true;
break;
case 'r':
rflag = true;
break;
case 's':
server = optarg;
break;
case 'v':
verbose = 1;
break;
case 'Z':
zstd = true;
break;
case 'z':
gzip = true;
break;
default:
usage();
}
if (gzip && zstd)
errx(EX_USAGE, "The -z and -Z options are mutually exclusive.");
if (insert && rflag)
errx(EX_USAGE, "The -i and -r options are mutually exclusive.");
argc -= optind;
argv += optind;
if (list) {
listdumpdev();
exit(EX_OK);
}
if (argc != 1)
usage();
#ifdef HAVE_CRYPTO
if (cipher != KERNELDUMP_ENC_NONE && pubkeyfile == NULL) {
errx(EX_USAGE, "-C option requires a public key file.");
} else if (pubkeyfile != NULL) {
ERR_load_crypto_strings();
}
#else
if (pubkeyfile != NULL)
errx(EX_UNAVAILABLE,"Unable to use the public key."
" Recompile dumpon with OpenSSL support.");
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
#endif
if (server != NULL && client != NULL) {
dev = _PATH_NETDUMP;
netdump = true;
} else if (server == NULL && client == NULL && argc > 0) {
if (strcmp(argv[0], "off") == 0) {
rflag = true;
dev = _PATH_DEVNULL;
} else
dev = argv[0];
netdump = false;
} else
usage();
fd = opendumpdev(dev, dumpdev);
if (!netdump && !gzip && !zstd && !rflag)
check_size(fd, dumpdev);
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
kdap = &ndconf;
bzero(kdap, sizeof(*kdap));
if (rflag)
kdap->kda_index = KDA_REMOVE;
else
kdap->kda_index = ins_idx;
kdap->kda_compression = KERNELDUMP_COMP_NONE;
if (zstd)
kdap->kda_compression = KERNELDUMP_COMP_ZSTD;
else if (gzip)
kdap->kda_compression = KERNELDUMP_COMP_GZIP;
if (netdump) {
memset(&hints, 0, sizeof(hints));
hints.ai_family = AF_INET;
hints.ai_protocol = IPPROTO_UDP;
res = NULL;
error = getaddrinfo(server, NULL, &hints, &res);
if (error != 0) {
if (error == EAI_SYSTEM)
err(EX_OSERR, "%s", gai_strerror(error));
errx(EX_NOHOST, "%s", gai_strerror(error));
}
server = inet_ntoa(
((struct sockaddr_in *)(void *)res->ai_addr)->sin_addr);
freeaddrinfo(res);
if (strlcpy(ndconf.kda_iface, argv[0],
sizeof(ndconf.kda_iface)) >= sizeof(ndconf.kda_iface))
errx(EX_USAGE, "invalid interface name '%s'", argv[0]);
if (inet_aton(server, &ndconf.kda_server.in4) == 0)
errx(EX_USAGE, "invalid server address '%s'", server);
if (inet_aton(client, &ndconf.kda_client.in4) == 0)
errx(EX_USAGE, "invalid client address '%s'", client);
if (gateway == NULL) {
gateway = find_gateway(argv[0]);
if (gateway == NULL) {
if (verbose)
printf(
"failed to look up gateway for %s\n",
server);
gateway = server;
}
}
if (inet_aton(gateway, &ndconf.kda_gateway.in4) == 0)
errx(EX_USAGE, "invalid gateway address '%s'", gateway);
ndconf.kda_af = AF_INET;
}
Add support for encrypted kernel crash dumps. Changes include modifications in kernel crash dump routines, dumpon(8) and savecore(8). A new tool called decryptcore(8) was added. A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump configuration in the diocskerneldump_arg structure to the kernel. The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for backward ABI compatibility. dumpon(8) generates an one-time random symmetric key and encrypts it using an RSA public key in capability mode. Currently only AES-256-CBC is supported but EKCD was designed to implement support for other algorithms in the future. The public key is chosen using the -k flag. The dumpon rc(8) script can do this automatically during startup using the dumppubkey rc.conf(5) variable. Once the keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O control. When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random IV and sets up the key schedule for the specified algorithm. Each time the kernel tries to write a crash dump to the dump device, the IV is replaced by a SHA-256 hash of the previous value. This is intended to make a possible differential cryptanalysis harder since it is possible to write multiple crash dumps without reboot by repeating the following commands: # sysctl debug.kdb.enter=1 db> call doadump(0) db> continue # savecore A kernel dump key consists of an algorithm identifier, an IV and an encrypted symmetric key. The kernel dump key size is included in a kernel dump header. The size is an unsigned 32-bit integer and it is aligned to a block size. The header structure has 512 bytes to match the block size so it was required to make a panic string 4 bytes shorter to add a new field to the header structure. If the kernel dump key size in the header is nonzero it is assumed that the kernel dump key is placed after the first header on the dump device and the core dump is encrypted. Separate functions were implemented to write the kernel dump header and the kernel dump key as they need to be unencrypted. The dump_write function encrypts data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps are not supported due to the way they are constructed which makes it impossible to use the CBC mode for encryption. It should be also noted that textdumps don't contain sensitive data by design as a user decides what information should be dumped. savecore(8) writes the kernel dump key to a key.# file if its size in the header is nonzero. # is the number of the current core dump. decryptcore(8) decrypts the core dump using a private RSA key and the kernel dump key. This is performed by a child process in capability mode. If the decryption was not successful the parent process removes a partially decrypted core dump. Description on how to encrypt crash dumps was added to the decryptcore(8), dumpon(8), rc.conf(5) and savecore(8) manual pages. EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU. The feature still has to be tested on arm and arm64 as it wasn't possible to run FreeBSD due to the problems with QEMU emulation and lack of hardware. Designed by: def, pjd Reviewed by: cem, oshogbo, pjd Partial review: delphij, emaste, jhb, kib Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4712
2016-12-10 16:20:39 +00:00
#ifdef HAVE_CRYPTO
if (pubkeyfile != NULL) {
kdap->kda_encryption = cipher;
genkey(pubkeyfile, kdap);
}
#endif
error = ioctl(fd, DIOCSKERNELDUMP, kdap);
if (error != 0)
error = errno;
explicit_bzero(kdap->kda_encryptedkey, kdap->kda_encryptedkeysize);
free(kdap->kda_encryptedkey);
explicit_bzero(kdap, sizeof(*kdap));
if (error != 0) {
if (netdump) {
/*
* Be slightly less user-hostile for some common
* errors, especially as users don't have any great
* discoverability into which NICs support netdump.
*/
if (error == ENXIO)
errx(EX_OSERR, "Unable to configure netdump "
"because the interface's link is down.");
else if (error == ENODEV)
errx(EX_OSERR, "Unable to configure netdump "
"because the interface driver does not yet "
"support netdump.");
}
errc(EX_OSERR, error, "ioctl(DIOCSKERNELDUMP)");
}
if (verbose)
listdumpdev();
exit(EX_OK);
}