2017-11-25 17:12:48 +00:00
|
|
|
/*-
|
|
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
|
|
*
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
* Copyright (C) 2010 David Xu <davidxu@freebsd.org>.
|
2002-09-19 01:14:08 +00:00
|
|
|
* Copyright (C) 2000 Jason Evans <jasone@freebsd.org>.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice(s), this list of conditions and the following disclaimer as
|
|
|
|
* the first lines of this file unmodified other than the possible
|
|
|
|
* addition of one or more copyright notices.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice(s), this list of conditions and the following disclaimer in
|
|
|
|
* the documentation and/or other materials provided with the
|
|
|
|
* distribution.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) ``AS IS'' AND ANY
|
|
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) BE
|
|
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
|
|
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
|
|
|
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*
|
|
|
|
* $FreeBSD$
|
|
|
|
*/
|
|
|
|
|
2004-02-03 05:47:19 +00:00
|
|
|
/*
|
|
|
|
* Some notes about this implementation.
|
|
|
|
*
|
|
|
|
* This is mostly a simple implementation of POSIX semaphores that
|
|
|
|
* does not need threading. Any semaphore created is a kernel-based
|
|
|
|
* semaphore regardless of the pshared attribute. This is necessary
|
|
|
|
* because libc's stub for pthread_cond_wait() doesn't really wait,
|
|
|
|
* and it is not worth the effort impose this behavior on libc.
|
|
|
|
*
|
|
|
|
* All functions here are designed to be thread-safe so that a
|
|
|
|
* threads library need not provide wrappers except to make
|
|
|
|
* sem_wait() and sem_timedwait() cancellation points or to
|
|
|
|
* provide a faster userland implementation for non-pshared
|
|
|
|
* semaphores.
|
|
|
|
*
|
|
|
|
* Also, this implementation of semaphores cannot really support
|
|
|
|
* real pshared semaphores. The sem_t is an allocated object
|
|
|
|
* and can't be seen by other processes when placed in shared
|
|
|
|
* memory. It should work across forks as long as the semaphore
|
|
|
|
* is created before any forks.
|
|
|
|
*
|
|
|
|
* The function sem_init() should be overridden by a threads
|
|
|
|
* library if it wants to provide a different userland version
|
|
|
|
* of semaphores. The functions sem_wait() and sem_timedwait()
|
|
|
|
* need to be wrapped to provide cancellation points. The function
|
|
|
|
* sem_post() may need to be wrapped to be signal-safe.
|
|
|
|
*/
|
2003-02-16 17:29:11 +00:00
|
|
|
#include "namespace.h"
|
2005-08-20 07:59:13 +00:00
|
|
|
#include <sys/types.h>
|
2004-02-03 05:47:19 +00:00
|
|
|
#include <sys/queue.h>
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
#include <machine/atomic.h>
|
2002-09-19 01:14:08 +00:00
|
|
|
#include <errno.h>
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
#include <sys/umtx.h>
|
|
|
|
#include <sys/_semaphore.h>
|
|
|
|
#include <limits.h>
|
2002-09-19 01:14:08 +00:00
|
|
|
#include <fcntl.h>
|
2004-02-03 05:47:19 +00:00
|
|
|
#include <pthread.h>
|
2002-09-19 01:14:08 +00:00
|
|
|
#include <stdarg.h>
|
2004-02-03 05:47:19 +00:00
|
|
|
#include <stdlib.h>
|
|
|
|
#include <time.h>
|
2003-02-16 17:29:11 +00:00
|
|
|
#include "un-namespace.h"
|
2004-02-03 05:47:19 +00:00
|
|
|
#include "libc_private.h"
|
2002-09-19 01:14:08 +00:00
|
|
|
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
/*
|
|
|
|
* Old semaphore definitions.
|
|
|
|
*/
|
|
|
|
struct sem {
|
|
|
|
#define SEM_MAGIC ((u_int32_t) 0x09fa4012)
|
|
|
|
u_int32_t magic;
|
|
|
|
pthread_mutex_t lock;
|
|
|
|
pthread_cond_t gtzero;
|
|
|
|
u_int32_t count;
|
|
|
|
u_int32_t nwaiters;
|
|
|
|
#define SEM_USER (NULL)
|
|
|
|
semid_t semid; /* semaphore id if kernel (shared) semaphore */
|
|
|
|
int syssem; /* 1 if kernel (shared) semaphore */
|
|
|
|
LIST_ENTRY(sem) entry;
|
|
|
|
struct sem **backpointer;
|
|
|
|
};
|
|
|
|
|
|
|
|
typedef struct sem* sem_t;
|
|
|
|
|
|
|
|
#define SEM_FAILED ((sem_t *)0)
|
|
|
|
#define SEM_VALUE_MAX __INT_MAX
|
|
|
|
|
|
|
|
#define SYM_FB10(sym) __CONCAT(sym, _fb10)
|
|
|
|
#define WEAK_REF(sym, alias) __weak_reference(sym, alias)
|
|
|
|
#define SYM_COMPAT(sym, impl, ver) __sym_compat(sym, impl, ver)
|
|
|
|
|
|
|
|
#define FB10_COMPAT(func, sym) \
|
|
|
|
WEAK_REF(func, SYM_FB10(sym)); \
|
|
|
|
SYM_COMPAT(sym, SYM_FB10(sym), FBSD_1.0)
|
|
|
|
|
2002-09-19 01:14:08 +00:00
|
|
|
static sem_t sem_alloc(unsigned int value, semid_t semid, int system_sem);
|
2004-02-03 05:47:19 +00:00
|
|
|
static void sem_free(sem_t sem);
|
2002-09-19 01:14:08 +00:00
|
|
|
|
2010-01-23 12:48:46 +00:00
|
|
|
static LIST_HEAD(, sem) named_sems = LIST_HEAD_INITIALIZER(named_sems);
|
2002-09-19 01:14:08 +00:00
|
|
|
static pthread_mutex_t named_sems_mtx = PTHREAD_MUTEX_INITIALIZER;
|
|
|
|
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
FB10_COMPAT(_libc_sem_init_compat, sem_init);
|
|
|
|
FB10_COMPAT(_libc_sem_destroy_compat, sem_destroy);
|
|
|
|
FB10_COMPAT(_libc_sem_open_compat, sem_open);
|
|
|
|
FB10_COMPAT(_libc_sem_close_compat, sem_close);
|
|
|
|
FB10_COMPAT(_libc_sem_unlink_compat, sem_unlink);
|
|
|
|
FB10_COMPAT(_libc_sem_wait_compat, sem_wait);
|
|
|
|
FB10_COMPAT(_libc_sem_trywait_compat, sem_trywait);
|
|
|
|
FB10_COMPAT(_libc_sem_timedwait_compat, sem_timedwait);
|
|
|
|
FB10_COMPAT(_libc_sem_post_compat, sem_post);
|
|
|
|
FB10_COMPAT(_libc_sem_getvalue_compat, sem_getvalue);
|
2004-02-03 05:47:19 +00:00
|
|
|
|
|
|
|
static inline int
|
|
|
|
sem_check_validity(sem_t *sem)
|
|
|
|
{
|
|
|
|
|
|
|
|
if ((sem != NULL) && ((*sem)->magic == SEM_MAGIC))
|
|
|
|
return (0);
|
|
|
|
else {
|
|
|
|
errno = EINVAL;
|
|
|
|
return (-1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2002-09-19 01:14:08 +00:00
|
|
|
static void
|
|
|
|
sem_free(sem_t sem)
|
|
|
|
{
|
|
|
|
|
|
|
|
sem->magic = 0;
|
|
|
|
free(sem);
|
|
|
|
}
|
|
|
|
|
|
|
|
static sem_t
|
|
|
|
sem_alloc(unsigned int value, semid_t semid, int system_sem)
|
|
|
|
{
|
|
|
|
sem_t sem;
|
|
|
|
|
|
|
|
if (value > SEM_VALUE_MAX) {
|
|
|
|
errno = EINVAL;
|
|
|
|
return (NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
sem = (sem_t)malloc(sizeof(struct sem));
|
|
|
|
if (sem == NULL) {
|
|
|
|
errno = ENOSPC;
|
|
|
|
return (NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
sem->count = (u_int32_t)value;
|
|
|
|
sem->nwaiters = 0;
|
|
|
|
sem->magic = SEM_MAGIC;
|
|
|
|
sem->semid = semid;
|
|
|
|
sem->syssem = system_sem;
|
|
|
|
return (sem);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
_libc_sem_init_compat(sem_t *sem, int pshared, unsigned int value)
|
2002-09-19 01:14:08 +00:00
|
|
|
{
|
2004-02-03 05:47:19 +00:00
|
|
|
semid_t semid;
|
2002-09-19 01:14:08 +00:00
|
|
|
|
|
|
|
/*
|
2004-02-03 05:47:19 +00:00
|
|
|
* We always have to create the kernel semaphore if the
|
|
|
|
* threads library isn't present since libc's version of
|
|
|
|
* pthread_cond_wait() is just a stub that doesn't really
|
|
|
|
* wait.
|
2002-09-19 01:14:08 +00:00
|
|
|
*/
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
semid = (semid_t)SEM_USER;
|
|
|
|
if ((pshared != 0) && ksem_init(&semid, value) != 0)
|
2004-02-03 05:47:19 +00:00
|
|
|
return (-1);
|
2002-09-19 01:14:08 +00:00
|
|
|
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
*sem = sem_alloc(value, semid, pshared);
|
2004-02-03 05:47:19 +00:00
|
|
|
if ((*sem) == NULL) {
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
if (pshared != 0)
|
|
|
|
ksem_destroy(semid);
|
2004-02-03 05:47:19 +00:00
|
|
|
return (-1);
|
|
|
|
}
|
|
|
|
return (0);
|
2002-09-19 01:14:08 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
_libc_sem_destroy_compat(sem_t *sem)
|
2002-09-19 01:14:08 +00:00
|
|
|
{
|
2004-02-03 05:47:19 +00:00
|
|
|
int retval;
|
|
|
|
|
2004-02-05 23:32:45 +00:00
|
|
|
if (sem_check_validity(sem) != 0)
|
2004-02-03 05:47:19 +00:00
|
|
|
return (-1);
|
2002-09-19 01:14:08 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If this is a system semaphore let the kernel track it otherwise
|
|
|
|
* make sure there are no waiters.
|
|
|
|
*/
|
2004-02-03 05:47:19 +00:00
|
|
|
if ((*sem)->syssem != 0)
|
2002-09-19 01:14:08 +00:00
|
|
|
retval = ksem_destroy((*sem)->semid);
|
2004-02-03 05:47:19 +00:00
|
|
|
else if ((*sem)->nwaiters > 0) {
|
2002-09-19 01:14:08 +00:00
|
|
|
errno = EBUSY;
|
|
|
|
retval = -1;
|
2004-02-03 05:47:19 +00:00
|
|
|
}
|
|
|
|
else {
|
|
|
|
retval = 0;
|
|
|
|
(*sem)->magic = 0;
|
2002-09-19 01:14:08 +00:00
|
|
|
}
|
|
|
|
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
if (retval == 0)
|
2004-02-03 05:47:19 +00:00
|
|
|
sem_free(*sem);
|
|
|
|
return (retval);
|
2002-09-19 01:14:08 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
sem_t *
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
_libc_sem_open_compat(const char *name, int oflag, ...)
|
2002-09-19 01:14:08 +00:00
|
|
|
{
|
|
|
|
sem_t *sem;
|
|
|
|
sem_t s;
|
|
|
|
semid_t semid;
|
|
|
|
mode_t mode;
|
|
|
|
unsigned int value;
|
|
|
|
|
|
|
|
mode = 0;
|
|
|
|
value = 0;
|
|
|
|
|
|
|
|
if ((oflag & O_CREAT) != 0) {
|
|
|
|
va_list ap;
|
|
|
|
|
|
|
|
va_start(ap, oflag);
|
|
|
|
mode = va_arg(ap, int);
|
|
|
|
value = va_arg(ap, unsigned int);
|
|
|
|
va_end(ap);
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* we can be lazy and let the kernel handle the "oflag",
|
|
|
|
* we'll just merge duplicate IDs into our list.
|
|
|
|
*/
|
|
|
|
if (ksem_open(&semid, name, oflag, mode, value) == -1)
|
|
|
|
return (SEM_FAILED);
|
|
|
|
/*
|
|
|
|
* search for a duplicate ID, we must return the same sem_t *
|
|
|
|
* if we locate one.
|
|
|
|
*/
|
|
|
|
_pthread_mutex_lock(&named_sems_mtx);
|
|
|
|
LIST_FOREACH(s, &named_sems, entry) {
|
2004-02-03 05:47:19 +00:00
|
|
|
if (s->semid == semid) {
|
|
|
|
sem = s->backpointer;
|
|
|
|
_pthread_mutex_unlock(&named_sems_mtx);
|
|
|
|
return (sem);
|
|
|
|
}
|
2002-09-19 01:14:08 +00:00
|
|
|
}
|
|
|
|
sem = (sem_t *)malloc(sizeof(*sem));
|
|
|
|
if (sem == NULL)
|
|
|
|
goto err;
|
|
|
|
*sem = sem_alloc(value, semid, 1);
|
|
|
|
if ((*sem) == NULL)
|
|
|
|
goto err;
|
2003-01-14 03:36:45 +00:00
|
|
|
LIST_INSERT_HEAD(&named_sems, *sem, entry);
|
2002-09-19 01:14:08 +00:00
|
|
|
(*sem)->backpointer = sem;
|
2003-01-14 03:36:45 +00:00
|
|
|
_pthread_mutex_unlock(&named_sems_mtx);
|
2002-09-19 01:14:08 +00:00
|
|
|
return (sem);
|
|
|
|
err:
|
|
|
|
_pthread_mutex_unlock(&named_sems_mtx);
|
|
|
|
ksem_close(semid);
|
|
|
|
if (sem != NULL) {
|
|
|
|
if (*sem != NULL)
|
|
|
|
sem_free(*sem);
|
|
|
|
else
|
|
|
|
errno = ENOSPC;
|
|
|
|
free(sem);
|
|
|
|
} else {
|
|
|
|
errno = ENOSPC;
|
|
|
|
}
|
|
|
|
return (SEM_FAILED);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
_libc_sem_close_compat(sem_t *sem)
|
2002-09-19 01:14:08 +00:00
|
|
|
{
|
|
|
|
|
2004-02-03 05:47:19 +00:00
|
|
|
if (sem_check_validity(sem) != 0)
|
|
|
|
return (-1);
|
|
|
|
|
2002-09-19 01:14:08 +00:00
|
|
|
if ((*sem)->syssem == 0) {
|
|
|
|
errno = EINVAL;
|
|
|
|
return (-1);
|
|
|
|
}
|
2004-02-03 05:47:19 +00:00
|
|
|
|
2002-09-19 01:14:08 +00:00
|
|
|
_pthread_mutex_lock(&named_sems_mtx);
|
2004-02-03 05:47:19 +00:00
|
|
|
if (ksem_close((*sem)->semid) != 0) {
|
2002-09-19 01:14:08 +00:00
|
|
|
_pthread_mutex_unlock(&named_sems_mtx);
|
|
|
|
return (-1);
|
|
|
|
}
|
|
|
|
LIST_REMOVE((*sem), entry);
|
|
|
|
_pthread_mutex_unlock(&named_sems_mtx);
|
|
|
|
sem_free(*sem);
|
2004-02-03 05:47:19 +00:00
|
|
|
*sem = NULL;
|
2002-09-19 01:14:08 +00:00
|
|
|
free(sem);
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
_libc_sem_unlink_compat(const char *name)
|
2002-09-19 01:14:08 +00:00
|
|
|
{
|
|
|
|
|
|
|
|
return (ksem_unlink(name));
|
|
|
|
}
|
|
|
|
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
static int
|
In revision 231989, we pass a 16-bit clock ID into kernel, however
according to POSIX document, the clock ID may be dynamically allocated,
it unlikely will be in 64K forever. To make it future compatible, we
pack all timeout information into a new structure called _umtx_time, and
use fourth argument as a size indication, a zero means it is old code
using timespec as timeout value, but the new structure also includes flags
and a clock ID, so the size argument is different than before, and it is
non-zero. With this change, it is possible that a thread can sleep
on any supported clock, though current kernel code does not have such a
POSIX clock driver system.
2012-02-25 02:12:17 +00:00
|
|
|
_umtx_wait_uint(volatile unsigned *mtx, unsigned id, const struct timespec *abstime)
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
{
|
In revision 231989, we pass a 16-bit clock ID into kernel, however
according to POSIX document, the clock ID may be dynamically allocated,
it unlikely will be in 64K forever. To make it future compatible, we
pack all timeout information into a new structure called _umtx_time, and
use fourth argument as a size indication, a zero means it is old code
using timespec as timeout value, but the new structure also includes flags
and a clock ID, so the size argument is different than before, and it is
non-zero. With this change, it is possible that a thread can sleep
on any supported clock, though current kernel code does not have such a
POSIX clock driver system.
2012-02-25 02:12:17 +00:00
|
|
|
struct _umtx_time *tm_p, timeout;
|
|
|
|
size_t tm_size;
|
|
|
|
|
|
|
|
if (abstime == NULL) {
|
|
|
|
tm_p = NULL;
|
|
|
|
tm_size = 0;
|
|
|
|
} else {
|
|
|
|
timeout._clockid = CLOCK_REALTIME;
|
|
|
|
timeout._flags = UMTX_ABSTIME;
|
|
|
|
timeout._timeout = *abstime;
|
|
|
|
tm_p = &timeout;
|
|
|
|
tm_size = sizeof(timeout);
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
}
|
|
|
|
return _umtx_op(__DEVOLATILE(void *, mtx),
|
In revision 231989, we pass a 16-bit clock ID into kernel, however
according to POSIX document, the clock ID may be dynamically allocated,
it unlikely will be in 64K forever. To make it future compatible, we
pack all timeout information into a new structure called _umtx_time, and
use fourth argument as a size indication, a zero means it is old code
using timespec as timeout value, but the new structure also includes flags
and a clock ID, so the size argument is different than before, and it is
non-zero. With this change, it is possible that a thread can sleep
on any supported clock, though current kernel code does not have such a
POSIX clock driver system.
2012-02-25 02:12:17 +00:00
|
|
|
UMTX_OP_WAIT_UINT_PRIVATE, id,
|
|
|
|
(void *)tm_size, __DECONST(void*, tm_p));
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
}
|
2002-09-19 01:14:08 +00:00
|
|
|
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
static int
|
|
|
|
_umtx_wake(volatile void *mtx)
|
|
|
|
{
|
|
|
|
return _umtx_op(__DEVOLATILE(void *, mtx), UMTX_OP_WAKE_PRIVATE,
|
|
|
|
1, NULL, NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define TIMESPEC_SUB(dst, src, val) \
|
|
|
|
do { \
|
|
|
|
(dst)->tv_sec = (src)->tv_sec - (val)->tv_sec; \
|
|
|
|
(dst)->tv_nsec = (src)->tv_nsec - (val)->tv_nsec; \
|
|
|
|
if ((dst)->tv_nsec < 0) { \
|
|
|
|
(dst)->tv_sec--; \
|
|
|
|
(dst)->tv_nsec += 1000000000; \
|
|
|
|
} \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
sem_cancel_handler(void *arg)
|
|
|
|
{
|
|
|
|
sem_t *sem = arg;
|
|
|
|
|
|
|
|
atomic_add_int(&(*sem)->nwaiters, -1);
|
|
|
|
if ((*sem)->nwaiters && (*sem)->count)
|
|
|
|
_umtx_wake(&(*sem)->count);
|
2002-09-19 01:14:08 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
_libc_sem_timedwait_compat(sem_t * __restrict sem,
|
|
|
|
const struct timespec * __restrict abstime)
|
2002-09-19 01:14:08 +00:00
|
|
|
{
|
2010-09-25 01:57:47 +00:00
|
|
|
int val, retval;
|
2002-09-19 01:14:08 +00:00
|
|
|
|
2004-02-03 05:47:19 +00:00
|
|
|
if (sem_check_validity(sem) != 0)
|
|
|
|
return (-1);
|
2002-09-19 01:14:08 +00:00
|
|
|
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
if ((*sem)->syssem != 0) {
|
2010-09-25 01:57:47 +00:00
|
|
|
_pthread_cancel_enter(1);
|
|
|
|
retval = ksem_wait((*sem)->semid); /* XXX no timeout */
|
|
|
|
_pthread_cancel_leave(retval == -1);
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
_pthread_testcancel();
|
|
|
|
for (;;) {
|
|
|
|
while ((val = (*sem)->count) > 0) {
|
|
|
|
if (atomic_cmpset_acq_int(&(*sem)->count, val, val - 1))
|
|
|
|
return (0);
|
|
|
|
}
|
2010-09-25 01:57:47 +00:00
|
|
|
if (retval) {
|
|
|
|
_pthread_testcancel();
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
break;
|
2010-09-25 01:57:47 +00:00
|
|
|
}
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
if (abstime) {
|
|
|
|
if (abstime->tv_nsec >= 1000000000 || abstime->tv_nsec < 0) {
|
|
|
|
errno = EINVAL;
|
|
|
|
return (-1);
|
|
|
|
}
|
2004-02-04 15:37:48 +00:00
|
|
|
}
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
atomic_add_int(&(*sem)->nwaiters, 1);
|
|
|
|
pthread_cleanup_push(sem_cancel_handler, sem);
|
2010-09-25 01:57:47 +00:00
|
|
|
_pthread_cancel_enter(1);
|
In revision 231989, we pass a 16-bit clock ID into kernel, however
according to POSIX document, the clock ID may be dynamically allocated,
it unlikely will be in 64K forever. To make it future compatible, we
pack all timeout information into a new structure called _umtx_time, and
use fourth argument as a size indication, a zero means it is old code
using timespec as timeout value, but the new structure also includes flags
and a clock ID, so the size argument is different than before, and it is
non-zero. With this change, it is possible that a thread can sleep
on any supported clock, though current kernel code does not have such a
POSIX clock driver system.
2012-02-25 02:12:17 +00:00
|
|
|
retval = _umtx_wait_uint(&(*sem)->count, 0, abstime);
|
2010-09-25 01:57:47 +00:00
|
|
|
_pthread_cancel_leave(0);
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
pthread_cleanup_pop(0);
|
|
|
|
atomic_add_int(&(*sem)->nwaiters, -1);
|
2004-02-04 15:37:48 +00:00
|
|
|
}
|
|
|
|
return (retval);
|
2002-09-19 01:14:08 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
_libc_sem_wait_compat(sem_t *sem)
|
2002-09-19 01:14:08 +00:00
|
|
|
{
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
return _libc_sem_timedwait_compat(sem, NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
_libc_sem_trywait_compat(sem_t *sem)
|
|
|
|
{
|
|
|
|
int val;
|
|
|
|
|
2004-02-03 05:47:19 +00:00
|
|
|
if (sem_check_validity(sem) != 0)
|
|
|
|
return (-1);
|
2002-09-19 01:14:08 +00:00
|
|
|
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
if ((*sem)->syssem != 0)
|
|
|
|
return ksem_trywait((*sem)->semid);
|
|
|
|
|
|
|
|
while ((val = (*sem)->count) > 0) {
|
|
|
|
if (atomic_cmpset_acq_int(&(*sem)->count, val, val - 1))
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
errno = EAGAIN;
|
|
|
|
return (-1);
|
2004-02-03 05:47:19 +00:00
|
|
|
}
|
2002-09-19 01:14:08 +00:00
|
|
|
|
2004-02-03 05:47:19 +00:00
|
|
|
int
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
_libc_sem_post_compat(sem_t *sem)
|
2004-02-03 05:47:19 +00:00
|
|
|
{
|
2002-09-19 01:14:08 +00:00
|
|
|
|
2004-02-03 05:47:19 +00:00
|
|
|
if (sem_check_validity(sem) != 0)
|
|
|
|
return (-1);
|
2002-09-19 01:14:08 +00:00
|
|
|
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
if ((*sem)->syssem != 0)
|
|
|
|
return ksem_post((*sem)->semid);
|
|
|
|
|
|
|
|
atomic_add_rel_int(&(*sem)->count, 1);
|
2012-01-16 06:15:14 +00:00
|
|
|
rmb();
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
if ((*sem)->nwaiters)
|
|
|
|
return _umtx_wake(&(*sem)->count);
|
|
|
|
return (0);
|
2002-09-19 01:14:08 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
Use umtx to implement process sharable semaphore, to make this work,
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
2010-01-05 02:37:59 +00:00
|
|
|
_libc_sem_getvalue_compat(sem_t * __restrict sem, int * __restrict sval)
|
2002-09-19 01:14:08 +00:00
|
|
|
{
|
2004-02-03 05:47:19 +00:00
|
|
|
int retval;
|
2002-09-19 01:14:08 +00:00
|
|
|
|
2004-02-03 05:47:19 +00:00
|
|
|
if (sem_check_validity(sem) != 0)
|
|
|
|
return (-1);
|
2002-09-19 01:14:08 +00:00
|
|
|
|
2004-02-03 05:47:19 +00:00
|
|
|
if ((*sem)->syssem != 0)
|
2002-09-19 01:14:08 +00:00
|
|
|
retval = ksem_getvalue((*sem)->semid, sval);
|
2004-02-03 05:47:19 +00:00
|
|
|
else {
|
|
|
|
*sval = (int)(*sem)->count;
|
|
|
|
retval = 0;
|
|
|
|
}
|
|
|
|
return (retval);
|
2002-09-19 01:14:08 +00:00
|
|
|
}
|