d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9e8d8b4b0c
freebsd-skq/sys/dev/pci/pcivar.h

592 lines
18 KiB
C
Raw Normal View History

Start each of the license/copyright comments with /*-, minor shuffle of lines
2005-01-06 01:43:34 +00:00
/*-
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
*
*/
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#ifndef _PCIVAR_H_
Replace #define<space> with #define<tab> so the code is consistent with style(9) and avoids mixing the two formats.
2006-12-14 16:53:48 +00:00
#define _PCIVAR_H_
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#include <sys/queue.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* some PCI bus constants */
Replace #define<space> with #define<tab> so the code is consistent with style(9) and avoids mixing the two formats.
2006-12-14 16:53:48 +00:00
#define PCI_MAXMAPS_0 6 /* max. no. of memory/port maps */
#define PCI_MAXMAPS_1 2 /* max. no. of maps for PCI to PCI bridge */
#define PCI_MAXMAPS_2 1 /* max. no. of maps for CardBus bridge */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
More fully support 64-bit bars. Prior to this commit, we supported only those bars that had addresses assigned by the BIOS and where the bridges were properly programmed. Now even unprogrammed ones work. This was needed for sun4v. We still only implement up to 2GB memory ranges, even for 64-bit bars. PCI standards at least through 2.2 say that this is the max (or 1GB is, I only know it is < 32bits). o Always define pci_addr_t as uint64_t. A pci address is always 64-bits, but some hosts can't address all of them. o Preserve the upper half of the 64-bit word during resource probing. o Test to make sure that 64-bit values can fit in a u_long (true on some platforms, but not others). Don't use those that can't. o minor pedantry about data sizes. o Better bridge resource reporting in bootverbose case. o Minor formatting changes to cope with different data types on different platforms. Submitted by: jmg, with many changes by me to fully support 64-bit addresses.
2006-10-30 19:18:46 +00:00
typedef uint64_t pci_addr_t;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Update the pci_cfg_save/restore routines to operate on bridge devices (type 1 and type 2) as well as leaf devices (type 0). In particular, this allows the existing PCI bus logic to save and restore capability registers such as MSI and PCI-express work for bridge devices rather than requiring that code to be duplicated in bridge drivers. It also means that bridge drivers no longer need to save and restore basic registers such as the PCI command register or BARs nor manage powerstates for the bridge device. While here, pci_setup_secbus() has been changed to initialize the 'sec' and 'sub' fields in the 'secbus' structure instead of requiring the pcib and pccbb drivers to do this in the NEW_PCIB + PCI_RES_BUS case. Differential Revision: https://reviews.freebsd.org/D2240 Reviewed by: imp, jmg MFC after: 2 weeks
2015-04-22 22:02:27 +00:00
/* Config registers for PCI-PCI and PCI-Cardbus bridges. */
struct pcicfg_bridge {
uint8_t br_seclat;
uint8_t br_subbus;
uint8_t br_secbus;
uint8_t br_pribus;
uint16_t br_control;
};
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
/* Interesting values for PCI power management */
struct pcicfg_pp {
uint16_t pp_cap; /* PCI power management capabilities */
Update PCI power management registers per PCI Bus Power Management Interface Specification Rev. 1.2. Rename pp_pcmcsr field of PM capabilities to pp_bse to avoid further confusions and adjust some comments accordingly. The real PMCSR (Power Management Control/Status Register) is PCIR_POWER_STATUS and it is actually BSE (PCI-to-PCI Bridge Support Extensions) register.
2010-10-20 23:41:16 +00:00
uint8_t pp_status; /* conf. space addr. of PM control/status reg */
uint8_t pp_bse; /* conf. space addr. of PM BSE reg */
uint8_t pp_data; /* conf. space addr. of PM data reg */
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
};
Explicitly track the state of all known BARs for each PCI device. The PCI bus driver will now remember the size of a BAR obtained during the initial bus scan and use that size when doing lazy resource allocation rather than resizing the BAR. The bus driver will now also report unallocated BARs to userland for display by 'pciconf -lb'. Psuedo-resources that are not BARs (such as the implicit I/O port resources for master/slave ATA controllers) will no longer be listed as BARs in 'pciconf -lb'. During resume, BARs are restored from their new saved state instead of having the raw registers saved and restored across resume. This also fixes restoring BARs at unusual loactions if said BAR has been allocated by a driver. Add a constant for the offset of the ROM BIOS BAR in PCI-PCI bridges and properly handle ROM BIOS BARs in PCI-PCI bridges. The PCI bus now also properly handles the lack of a ROM BIOS BAR in a PCI-Cardbus bridge. Tested by: jkim
2011-03-31 13:22:12 +00:00
struct pci_map {
pci_addr_t pm_value; /* Raw BAR value */
pci_addr_t pm_size;
Allocate PCI I/O memory spaces for VFs When creating VFs, we must size each SR-IOV BAR on the PF and allocate a configuous I/O memory window large enough for every VF. However, the window only needs to be aligned to a boundary equal to the size of the window for a single VF. When a VF attempts to allocate an I/O memory resource, we must intercept the request in the pci driver and pass it off to the SR-IOV code, which will allocate the correct window from the pre-allocated memory space for the PF. Inform the pci driver about the size and address of the BARs on the VF when the VF is created. This is required by pciconf -b and bhyve. Differential Revision: https://reviews.freebsd.org/D78 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:26 +00:00
uint16_t pm_reg;
Explicitly track the state of all known BARs for each PCI device. The PCI bus driver will now remember the size of a BAR obtained during the initial bus scan and use that size when doing lazy resource allocation rather than resizing the BAR. The bus driver will now also report unallocated BARs to userland for display by 'pciconf -lb'. Psuedo-resources that are not BARs (such as the implicit I/O port resources for master/slave ATA controllers) will no longer be listed as BARs in 'pciconf -lb'. During resume, BARs are restored from their new saved state instead of having the raw registers saved and restored across resume. This also fixes restoring BARs at unusual loactions if said BAR has been allocated by a driver. Add a constant for the offset of the ROM BIOS BAR in PCI-PCI bridges and properly handle ROM BIOS BARs in PCI-PCI bridges. The PCI bus now also properly handles the lack of a ROM BIOS BAR in a PCI-Cardbus bridge. Tested by: jkim
2011-03-31 13:22:12 +00:00
STAILQ_ENTRY(pci_map) pm_link;
};
provide routines to access VPD data at the PCI layer... remove sk's own implementation, and use the new calls to get the data... Reviewed by: -arch
2006-10-09 16:15:56 +00:00
struct vpd_readonly {
char keyword[2];
char *value;
Add support for displaying VPD for PCI devices via pciconf. - Store the length of each read-only VPD value since not all values are guaranteed to be ASCII values (though most are). - Add a new pciio ioctl to fetch VPD for a single PCI device. The values are returned as a list of variable length records, one for the device name and each keyword. - Add a new -V flag to pciconf's list mode which displays VPD data for each device. MFC after: 1 week
2014-01-20 20:56:09 +00:00
int len;
provide routines to access VPD data at the PCI layer... remove sk's own implementation, and use the new calls to get the data... Reviewed by: -arch
2006-10-09 16:15:56 +00:00
};
struct vpd_write {
char keyword[2];
char *value;
int start;
int len;
};
struct pcicfg_vpd {
uint8_t vpd_reg; /* base register, + 2 for addr, + 4 data */
Change the VPD code to read the VPD data on-demand when a driver asks for it via pci_get_vpd_*() rather than always reading it for each device during boot. I've left the tunable so that it can still be turned off if a device driver causes a lockup via a query to a broken device, but devices whose drivers do not use VPD (the vast majority) should no longer result in lockups during boot, and most folks should not need to tweak the tunable now. Tested on: bge(4) Silence from: jmg
2007-03-26 20:18:52 +00:00
char vpd_cached;
provide routines to access VPD data at the PCI layer... remove sk's own implementation, and use the new calls to get the data... Reviewed by: -arch
2006-10-09 16:15:56 +00:00
char *vpd_ident; /* string identifier */
int vpd_rocnt;
struct vpd_readonly *vpd_ros;
int vpd_wcnt;
struct vpd_write *vpd_w;
};
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
/* Interesting values for PCI MSI */
struct pcicfg_msi {
uint16_t msi_ctrl; /* Message Control */
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
2006-11-13 21:47:30 +00:00
uint8_t msi_location; /* Offset of MSI capability registers. */
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
uint8_t msi_msgnum; /* Number of messages */
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
2006-11-13 21:47:30 +00:00
int msi_alloc; /* Number of allocated messages. */
uint64_t msi_addr; /* Contents of address register. */
uint16_t msi_data; /* Contents of data register. */
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
2007-05-02 17:50:36 +00:00
u_int msi_handlers;
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
2006-11-13 21:47:30 +00:00
};
Fix a couple of comment typos. Reported by: ru
2006-11-14 17:54:55 +00:00
/* Interesting values for PCI MSI-X */
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
2007-05-02 17:50:36 +00:00
struct msix_vector {
uint64_t mv_address; /* Contents of address register. */
uint32_t mv_data; /* Contents of data register. */
int mv_irq;
};
struct msix_table_entry {
u_int mte_vector; /* 1-based index into msix_vectors array. */
u_int mte_handlers;
};
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
2006-11-13 21:47:30 +00:00
struct pcicfg_msix {
uint16_t msix_ctrl; /* Message Control */
uint16_t msix_msgnum; /* Number of messages */
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
2007-05-02 17:50:36 +00:00
uint8_t msix_location; /* Offset of MSI-X capability registers. */
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
2006-11-13 21:47:30 +00:00
uint8_t msix_table_bar; /* BAR containing vector table. */
uint8_t msix_pba_bar; /* BAR containing PBA. */
uint32_t msix_table_offset;
uint32_t msix_pba_offset;
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
2007-05-02 17:50:36 +00:00
int msix_alloc; /* Number of allocated vectors. */
int msix_table_len; /* Length of virtual table. */
struct msix_table_entry *msix_table; /* Virtual table. */
struct msix_vector *msix_vectors; /* Array of allocated vectors. */
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
2006-11-13 21:47:30 +00:00
struct resource *msix_table_res; /* Resource containing vector table. */
struct resource *msix_pba_res; /* Resource containing PBA. */
Teach the PCI code to parse MSI extended capabilities. Re-arrange the pcicfg struct a bit to hold extcap structures instead of structure members.
2003-09-14 19:30:00 +00:00
};
SATA device on some nForce based boards could get confused if MSI is not used but MSI to HyperTransport IRQ mapping is enabled, and would act as if MSI is turned on, resulting in interrupt loss. This commit will, 1. enable MSI mapping on a device only when MSI is enabled for that device and the MSI address matches the HT mapping window. 2. enable MSI mapping on a bridge only when a downstream device is allocated an MSI address in the mapping window PR: kern/118842 Reviewed by: jhb MFC after: 1 week
2008-07-23 09:44:36 +00:00
/* Interesting values for HyperTransport */
struct pcicfg_ht {
Fix a few issues with HyperTransport devices and MSI interrupts: - Always enable the HyperTransport MSI mapping window for HyperTransport to PCI bridges (these show up as HyperTransport slave devices). The mapping windows in PCI-PCI bridges are enabled by existing code in the PCI-PCI bridge driver as MSI requests propagate up the device tree, but Host-PCI bridges don't really show up in that tree. - If the PCI device at domain 0 bus 0 slot 0 function 0 is not a HyperTransport device, then blacklist MSI on any other HT devices in the system. Linux has a similar quirk. PR: kern/155442 Tested by: Zack Dannar zdannar of gmail MFC after: 1 week
2011-03-18 12:13:04 +00:00
uint8_t ht_slave; /* Non-zero if device is an HT slave. */
SATA device on some nForce based boards could get confused if MSI is not used but MSI to HyperTransport IRQ mapping is enabled, and would act as if MSI is turned on, resulting in interrupt loss. This commit will, 1. enable MSI mapping on a device only when MSI is enabled for that device and the MSI address matches the HT mapping window. 2. enable MSI mapping on a bridge only when a downstream device is allocated an MSI address in the mapping window PR: kern/118842 Reviewed by: jhb MFC after: 1 week
2008-07-23 09:44:36 +00:00
uint8_t ht_msimap; /* Offset of MSI mapping cap registers. */
uint16_t ht_msictrl; /* MSI mapping control */
uint64_t ht_msiaddr; /* MSI mapping base address */
};
Expand the set of APIs available for locating PCI capabilities: - pci_find_extcap() is repurposed to be used for fetching PCI-express extended capabilities (PCIZ_* constants in <dev/pci/pcireg.h>). - pci_find_htcap() can be used to locate a specific HyperTransport capability (PCIM_HTCAP_* constants in <dev/pci/pcireg.h>). - Cache the starting location of the PCI-express capability for PCI-express devices in PCI device ivars.
2012-03-03 18:08:57 +00:00
/* Interesting values for PCI-express */
struct pcicfg_pcie {
uint8_t pcie_location; /* Offset of PCI-e capability registers. */
uint8_t pcie_type; /* Device type. */
Save more of config space for PCI Express and PCI-X devices. Expand pci_save_state and pci_restore_state to save more of the config state for PCI Express and PCI-X devices. Various writable control registers are present in PCI Express that can potentially be lost over suspend/resume cycle. This change is modeled after similar functionality in Linux. Reviewed by: wlosh,jhb MFC after: 1 month
2012-03-08 21:09:34 +00:00
uint16_t pcie_flags; /* Device capabilities register. */
uint16_t pcie_device_ctl; /* Device control register. */
uint16_t pcie_link_ctl; /* Link control register. */
uint16_t pcie_slot_ctl; /* Slot control register. */
uint16_t pcie_root_ctl; /* Root control register. */
uint16_t pcie_device_ctl2; /* Second device control register. */
uint16_t pcie_link_ctl2; /* Second link control register. */
uint16_t pcie_slot_ctl2; /* Second slot control register. */
};
struct pcicfg_pcix {
uint16_t pcix_command;
uint8_t pcix_location; /* Offset of PCI-X capability registers. */
Expand the set of APIs available for locating PCI capabilities: - pci_find_extcap() is repurposed to be used for fetching PCI-express extended capabilities (PCIZ_* constants in <dev/pci/pcireg.h>). - pci_find_htcap() can be used to locate a specific HyperTransport capability (PCIM_HTCAP_* constants in <dev/pci/pcireg.h>). - Cache the starting location of the PCI-express capability for PCI-express devices in PCI device ivars.
2012-03-03 18:08:57 +00:00
};
Implement interface to create SR-IOV Virtual Functions Implement the interace to create SR-IOV Virtual Functions (VFs). When a driver registers that they support SR-IOV by calling pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov for that device. An ioctl can be invoked on that device to create VFs and have the driver initialize them. At this point, allocating memory I/O windows (BARs) is not supported. Differential Revision: https://reviews.freebsd.org/D76 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:09 +00:00
struct pcicfg_vf {
int index;
};
#define PCICFG_VF 0x0001 /* Device is an SR-IOV Virtual Function */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* config header information common to all header types */
typedef struct pcicfg {
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
struct device *dev; /* device which owns this */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Explicitly track the state of all known BARs for each PCI device. The PCI bus driver will now remember the size of a BAR obtained during the initial bus scan and use that size when doing lazy resource allocation rather than resizing the BAR. The bus driver will now also report unallocated BARs to userland for display by 'pciconf -lb'. Psuedo-resources that are not BARs (such as the implicit I/O port resources for master/slave ATA controllers) will no longer be listed as BARs in 'pciconf -lb'. During resume, BARs are restored from their new saved state instead of having the raw registers saved and restored across resume. This also fixes restoring BARs at unusual loactions if said BAR has been allocated by a driver. Add a constant for the offset of the ROM BIOS BAR in PCI-PCI bridges and properly handle ROM BIOS BARs in PCI-PCI bridges. The PCI bus now also properly handles the lack of a ROM BIOS BAR in a PCI-Cardbus bridge. Tested by: jkim
2011-03-31 13:22:12 +00:00
STAILQ_HEAD(, pci_map) maps; /* BARs */
Remove advertising clause from University of California Regent's license, per letter dated July 22, 1999 and email from Peter Wemm, Alan Cox and Robert Watson. Approved by: core, peter, alc, rwatson
2004-04-07 20:46:16 +00:00
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint16_t subvendor; /* card vendor ID */
uint16_t subdevice; /* card device ID, assigned by card vendor */
uint16_t vendor; /* chip vendor ID */
uint16_t device; /* chip device ID, assigned by chip vendor */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint16_t cmdreg; /* disable/enable chip and PCI options */
uint16_t statreg; /* supported PCI features and error state */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint8_t baseclass; /* chip PCI class */
uint8_t subclass; /* chip PCI subclass */
uint8_t progif; /* chip PCI programming interface */
uint8_t revid; /* chip revision ID */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint8_t hdrtype; /* chip config header type */
uint8_t cachelnsz; /* cache line size in 4byte units */
uint8_t intpin; /* PCI interrupt pin */
uint8_t intline; /* interrupt line (IRQ for PC arch) */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint8_t mingnt; /* min. useful bus grant time in 250ns units */
uint8_t maxlat; /* max. tolerated bus grant latency in 250ns */
uint8_t lattimer; /* latency timer in units of 30ns bus cycles */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint8_t mfdev; /* multi-function device (from hdrtype reg) */
uint8_t nummaps; /* actual number of PCI maps used */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Make the PCI code aware of PCI domains (aka PCI segments) so we can support machines having multiple independently numbered PCI domains and don't support reenumeration without ambiguity amongst the devices as seen by the OS and represented by PCI location strings. This includes introducing a function pci_find_dbsf(9) which works like pci_find_bsf(9) but additionally takes a domain number argument and limiting pci_find_bsf(9) to only search devices in domain 0 (the only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order to no longer report false positives when searching for siblings and dupe devices in the same domain respectively. Along with this change the sole host-PCI bridge driver converted to actually make use of PCI domain support is uninorth(4), the others continue to use domain 0 only for now and need to be converted as appropriate later on. Note that this means that the format of the location strings as used by pciconf(8) has been changed and that consumers of <sys/pciio.h> potentially need to be recompiled. Suggested by: jhb Reviewed by: grehan, jhb, marcel Approved by: re (kensmith), jhb (PCI maintainer hat)
2007-09-30 11:05:18 +00:00
uint32_t domain; /* PCI domain */
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint8_t bus; /* config space bus address */
uint8_t slot; /* config space slot address */
uint8_t func; /* config space function number */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Implement interface to create SR-IOV Virtual Functions Implement the interace to create SR-IOV Virtual Functions (VFs). When a driver registers that they support SR-IOV by calling pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov for that device. An ioctl can be invoked on that device to create VFs and have the driver initialize them. At this point, allocating memory I/O windows (BARs) is not supported. Differential Revision: https://reviews.freebsd.org/D76 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:09 +00:00
uint32_t flags; /* flags defined above */
size_t devinfo_size; /* Size of devinfo for this bus type. */
Update the pci_cfg_save/restore routines to operate on bridge devices (type 1 and type 2) as well as leaf devices (type 0). In particular, this allows the existing PCI bus logic to save and restore capability registers such as MSI and PCI-express work for bridge devices rather than requiring that code to be duplicated in bridge drivers. It also means that bridge drivers no longer need to save and restore basic registers such as the PCI command register or BARs nor manage powerstates for the bridge device. While here, pci_setup_secbus() has been changed to initialize the 'sec' and 'sub' fields in the 'secbus' structure instead of requiring the pcib and pccbb drivers to do this in the NEW_PCIB + PCI_RES_BUS case. Differential Revision: https://reviews.freebsd.org/D2240 Reviewed by: imp, jmg MFC after: 2 weeks
2015-04-22 22:02:27 +00:00
struct pcicfg_bridge bridge; /* Bridges */
Adjust some comments.
2009-06-01 20:27:14 +00:00
struct pcicfg_pp pp; /* Power management */
struct pcicfg_vpd vpd; /* Vital product data */
struct pcicfg_msi msi; /* PCI MSI */
struct pcicfg_msix msix; /* PCI MSI-X */
SATA device on some nForce based boards could get confused if MSI is not used but MSI to HyperTransport IRQ mapping is enabled, and would act as if MSI is turned on, resulting in interrupt loss. This commit will, 1. enable MSI mapping on a device only when MSI is enabled for that device and the MSI address matches the HT mapping window. 2. enable MSI mapping on a bridge only when a downstream device is allocated an MSI address in the mapping window PR: kern/118842 Reviewed by: jhb MFC after: 1 week
2008-07-23 09:44:36 +00:00
struct pcicfg_ht ht; /* HyperTransport */
Expand the set of APIs available for locating PCI capabilities: - pci_find_extcap() is repurposed to be used for fetching PCI-express extended capabilities (PCIZ_* constants in <dev/pci/pcireg.h>). - pci_find_htcap() can be used to locate a specific HyperTransport capability (PCIM_HTCAP_* constants in <dev/pci/pcireg.h>). - Cache the starting location of the PCI-express capability for PCI-express devices in PCI device ivars.
2012-03-03 18:08:57 +00:00
struct pcicfg_pcie pcie; /* PCI Express */
Save more of config space for PCI Express and PCI-X devices. Expand pci_save_state and pci_restore_state to save more of the config state for PCI Express and PCI-X devices. Various writable control registers are present in PCI Express that can potentially be lost over suspend/resume cycle. This change is modeled after similar functionality in Linux. Reviewed by: wlosh,jhb MFC after: 1 month
2012-03-08 21:09:34 +00:00
struct pcicfg_pcix pcix; /* PCI-X */
Implement interface to create SR-IOV Virtual Functions Implement the interace to create SR-IOV Virtual Functions (VFs). When a driver registers that they support SR-IOV by calling pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov for that device. An ioctl can be invoked on that device to create VFs and have the driver initialize them. At this point, allocating memory I/O windows (BARs) is not supported. Differential Revision: https://reviews.freebsd.org/D76 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:09 +00:00
struct pcicfg_iov *iov; /* SR-IOV */
struct pcicfg_vf vf; /* SR-IOV Virtual Function */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
} pcicfgregs;
/* additional type 1 device config header information (PCI to PCI bridge) */
typedef struct {
pci_addr_t pmembase; /* base address of prefetchable memory */
pci_addr_t pmemlimit; /* topmost address of prefetchable memory */
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint32_t membase; /* base address of memory window */
uint32_t memlimit; /* topmost address of memory window */
uint32_t iobase; /* base address of port window */
uint32_t iolimit; /* topmost address of port window */
uint16_t secstat; /* secondary bus status register */
uint16_t bridgectl; /* bridge control register */
uint8_t seclat; /* CardBus latency timer */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
} pcih1cfgregs;
/* additional type 2 device config header information (CardBus bridge) */
typedef struct {
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
uint32_t membase0; /* base address of memory window */
uint32_t memlimit0; /* topmost address of memory window */
uint32_t membase1; /* base address of memory window */
uint32_t memlimit1; /* topmost address of memory window */
uint32_t iobase0; /* base address of port window */
uint32_t iolimit0; /* topmost address of port window */
uint32_t iobase1; /* base address of port window */
uint32_t iolimit1; /* topmost address of port window */
uint32_t pccardif; /* PC Card 16bit IF legacy more base addr. */
uint16_t secstat; /* secondary bus status register */
uint16_t bridgectl; /* bridge control register */
uint8_t seclat; /* CardBus latency timer */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
} pcih2cfgregs;
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
extern uint32_t pci_numdevs;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Encapsulate the old PCI compatability support and APIs completely under "options COMPAT_OLDPCI". This option already existed, but now also tidies up the declarations in #include <pci/pci*.h>. It is amazing how much stuff was using the old pre-FreeBSD 3.x names and going silently undetected.
2000-05-28 16:35:57 +00:00
/* Only if the prerequisites are present */
#if defined(_SYS_BUS_H_) && defined(_SYS_PCIIO_H_)
struct pci_devinfo {
STAILQ_ENTRY(pci_devinfo) pci_links;
struct resource_list resources;
pcicfgregs cfg;
struct pci_conf conf;
};
#endif
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
#ifdef _SYS_BUS_H_
#include "pci_if.h"
enum pci_device_ivars {
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
PCI_IVAR_SUBVENDOR,
PCI_IVAR_SUBDEVICE,
PCI_IVAR_VENDOR,
PCI_IVAR_DEVICE,
PCI_IVAR_DEVID,
PCI_IVAR_CLASS,
PCI_IVAR_SUBCLASS,
PCI_IVAR_PROGIF,
PCI_IVAR_REVID,
PCI_IVAR_INTPIN,
PCI_IVAR_IRQ,
Make the PCI code aware of PCI domains (aka PCI segments) so we can support machines having multiple independently numbered PCI domains and don't support reenumeration without ambiguity amongst the devices as seen by the OS and represented by PCI location strings. This includes introducing a function pci_find_dbsf(9) which works like pci_find_bsf(9) but additionally takes a domain number argument and limiting pci_find_bsf(9) to only search devices in domain 0 (the only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order to no longer report false positives when searching for siblings and dupe devices in the same domain respectively. Along with this change the sole host-PCI bridge driver converted to actually make use of PCI domain support is uninorth(4), the others continue to use domain 0 only for now and need to be converted as appropriate later on. Note that this means that the format of the location strings as used by pciconf(8) has been changed and that consumers of <sys/pciio.h> potentially need to be recompiled. Suggested by: jhb Reviewed by: grehan, jhb, marcel Approved by: re (kensmith), jhb (PCI maintainer hat)
2007-09-30 11:05:18 +00:00
PCI_IVAR_DOMAIN,
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
PCI_IVAR_BUS,
PCI_IVAR_SLOT,
PCI_IVAR_FUNCTION,
Add a new cardbus specific ivar: PCI_IVAR_ETHADDR. Some pci-like buses support querying the MAC address in a standard-for-that-bus way. The base pci bus returns NULL for this IVAR always. Submitted by: sam Approved by: re (blanket for NEWCARD)
2002-11-27 06:41:28 +00:00
PCI_IVAR_ETHADDR,
Allow one to access the cached values for CMDREG, CACHELNSZ, MINGNT, MAXLAT and LATTIMER. Improve error message when a bogus RID type is requested for a bar.
2005-09-11 03:22:03 +00:00
PCI_IVAR_CMDREG,
PCI_IVAR_CACHELNSZ,
PCI_IVAR_MINGNT,
PCI_IVAR_MAXLAT,
Remove a trailing comma which FlexeLint whines about.
2008-04-12 20:26:07 +00:00
PCI_IVAR_LATTIMER
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
};
/*
* Simplified accessors for pci devices
*/
Replace #define<space> with #define<tab> so the code is consistent with style(9) and avoids mixing the two formats.
2006-12-14 16:53:48 +00:00
#define PCI_ACCESSOR(var, ivar, type) \
Use the new resource_list_print_type() function to print resource list contents, and the new __BUS_ACCESSOR macro to construct the accessor functions.
2001-12-21 21:49:57 +00:00
__BUS_ACCESSOR(pci, var, PCI, ivar, type)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
PCI_ACCESSOR(subvendor, SUBVENDOR, uint16_t)
PCI_ACCESSOR(subdevice, SUBDEVICE, uint16_t)
PCI_ACCESSOR(vendor, VENDOR, uint16_t)
PCI_ACCESSOR(device, DEVICE, uint16_t)
PCI_ACCESSOR(devid, DEVID, uint32_t)
PCI_ACCESSOR(class, CLASS, uint8_t)
PCI_ACCESSOR(subclass, SUBCLASS, uint8_t)
PCI_ACCESSOR(progif, PROGIF, uint8_t)
PCI_ACCESSOR(revid, REVID, uint8_t)
PCI_ACCESSOR(intpin, INTPIN, uint8_t)
PCI_ACCESSOR(irq, IRQ, uint8_t)
Make the PCI code aware of PCI domains (aka PCI segments) so we can support machines having multiple independently numbered PCI domains and don't support reenumeration without ambiguity amongst the devices as seen by the OS and represented by PCI location strings. This includes introducing a function pci_find_dbsf(9) which works like pci_find_bsf(9) but additionally takes a domain number argument and limiting pci_find_bsf(9) to only search devices in domain 0 (the only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order to no longer report false positives when searching for siblings and dupe devices in the same domain respectively. Along with this change the sole host-PCI bridge driver converted to actually make use of PCI domain support is uninorth(4), the others continue to use domain 0 only for now and need to be converted as appropriate later on. Note that this means that the format of the location strings as used by pciconf(8) has been changed and that consumers of <sys/pciio.h> potentially need to be recompiled. Suggested by: jhb Reviewed by: grehan, jhb, marcel Approved by: re (kensmith), jhb (PCI maintainer hat)
2007-09-30 11:05:18 +00:00
PCI_ACCESSOR(domain, DOMAIN, uint32_t)
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
PCI_ACCESSOR(bus, BUS, uint8_t)
PCI_ACCESSOR(slot, SLOT, uint8_t)
PCI_ACCESSOR(function, FUNCTION, uint8_t)
PCI_ACCESSOR(ether, ETHADDR, uint8_t *)
Allow one to access the cached values for CMDREG, CACHELNSZ, MINGNT, MAXLAT and LATTIMER. Improve error message when a bogus RID type is requested for a bar.
2005-09-11 03:22:03 +00:00
PCI_ACCESSOR(cmdreg, CMDREG, uint8_t)
PCI_ACCESSOR(cachelnsz, CACHELNSZ, uint8_t)
PCI_ACCESSOR(mingnt, MINGNT, uint8_t)
PCI_ACCESSOR(maxlat, MAXLAT, uint8_t)
PCI_ACCESSOR(lattimer, LATTIMER, uint8_t)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
Get out the roto-rooter and clean up the abuse of nexus ivars by the i386/isa/pcibus.c. This gets -current running again on multiple host->pci machines after the most recent nexus commits. I had discussed this with Mike Smith, but ended up doing it slightly differently to what we discussed as it turned out cleaner this way. Mike was suggesting creating a new resource (SYS_RES_PCIBUS) or something and using *_[gs]et_resource(), but IMHO that wasn't ideal as SYS_RES_* is meant to be a global platform property, not a quirk of a given implementation. This does use the ivar methods but does so properly. It also now prints the physical pci bus that a host->pci bridge (pcib) corresponds to.
2000-09-28 00:37:32 +00:00
#undef PCI_ACCESSOR
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/*
* Operations on configuration space.
*/
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
static __inline uint32_t
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
pci_read_config(device_t dev, int reg, int width)
{
return PCI_READ_CONFIG(device_get_parent(dev), dev, reg, width);
}
static __inline void
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
pci_write_config(device_t dev, int reg, uint32_t val, int width)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
{
PCI_WRITE_CONFIG(device_get_parent(dev), dev, reg, val, width);
}
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
/*
* Ivars for pci bridges.
*/
/*typedef enum pci_device_ivars pcib_device_ivars;*/
enum pcib_device_ivars {
Make the PCI code aware of PCI domains (aka PCI segments) so we can support machines having multiple independently numbered PCI domains and don't support reenumeration without ambiguity amongst the devices as seen by the OS and represented by PCI location strings. This includes introducing a function pci_find_dbsf(9) which works like pci_find_bsf(9) but additionally takes a domain number argument and limiting pci_find_bsf(9) to only search devices in domain 0 (the only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order to no longer report false positives when searching for siblings and dupe devices in the same domain respectively. Along with this change the sole host-PCI bridge driver converted to actually make use of PCI domain support is uninorth(4), the others continue to use domain 0 only for now and need to be converted as appropriate later on. Note that this means that the format of the location strings as used by pciconf(8) has been changed and that consumers of <sys/pciio.h> potentially need to be recompiled. Suggested by: jhb Reviewed by: grehan, jhb, marcel Approved by: re (kensmith), jhb (PCI maintainer hat)
2007-09-30 11:05:18 +00:00
PCIB_IVAR_DOMAIN,
* Completely rewrite the alpha busspace to hide the implementation from the drivers. * Remove legacy inx/outx support from chipset and replace with macros which call busspace. * Rework pci config accesses to route through the pcib device instead of calling a MD function directly. With these changes it is possible to cleanly support machines which have more than one independantly numbered PCI busses. As a bonus, the new busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
PCIB_IVAR_BUS
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
};
Replace #define<space> with #define<tab> so the code is consistent with style(9) and avoids mixing the two formats.
2006-12-14 16:53:48 +00:00
#define PCIB_ACCESSOR(var, ivar, type) \
Use the __BUS_ACCESSOR macro for PCIB_ACCESSOR instead of reimplementing it. Reviewed by: tmm
2002-08-19 22:50:08 +00:00
__BUS_ACCESSOR(pcib, var, PCIB, ivar, type)
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
Make the PCI code aware of PCI domains (aka PCI segments) so we can support machines having multiple independently numbered PCI domains and don't support reenumeration without ambiguity amongst the devices as seen by the OS and represented by PCI location strings. This includes introducing a function pci_find_dbsf(9) which works like pci_find_bsf(9) but additionally takes a domain number argument and limiting pci_find_bsf(9) to only search devices in domain 0 (the only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order to no longer report false positives when searching for siblings and dupe devices in the same domain respectively. Along with this change the sole host-PCI bridge driver converted to actually make use of PCI domain support is uninorth(4), the others continue to use domain 0 only for now and need to be converted as appropriate later on. Note that this means that the format of the location strings as used by pciconf(8) has been changed and that consumers of <sys/pciio.h> potentially need to be recompiled. Suggested by: jhb Reviewed by: grehan, jhb, marcel Approved by: re (kensmith), jhb (PCI maintainer hat)
2007-09-30 11:05:18 +00:00
PCIB_ACCESSOR(domain, DOMAIN, uint32_t)
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
PCIB_ACCESSOR(bus, BUS, uint32_t)
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
Get out the roto-rooter and clean up the abuse of nexus ivars by the i386/isa/pcibus.c. This gets -current running again on multiple host->pci machines after the most recent nexus commits. I had discussed this with Mike Smith, but ended up doing it slightly differently to what we discussed as it turned out cleaner this way. Mike was suggesting creating a new resource (SYS_RES_PCIBUS) or something and using *_[gs]et_resource(), but IMHO that wasn't ideal as SYS_RES_* is meant to be a global platform property, not a quirk of a given implementation. This does use the ivar methods but does so properly. It also now prints the physical pci bus that a host->pci bridge (pcib) corresponds to.
2000-09-28 00:37:32 +00:00
#undef PCIB_ACCESSOR
Don't claim to have routed an interrupt when the method actually returned an error.
2002-02-12 01:28:49 +00:00
/*
0 is not an invalid interrupt in the PCI world (just in the ia32 world), do not treat it as such. This fixes the alpha boot problem. Reviewed by: drew, des
2002-06-07 15:28:16 +00:00
* PCI interrupt validation. Invalid interrupt values such as 0 or 128
* on i386 or other platforms should be mapped out in the MD pcireadconf
* code and not here, since the only MI invalid IRQ is 255.
Don't claim to have routed an interrupt when the method actually returned an error.
2002-02-12 01:28:49 +00:00
*/
Replace #define<space> with #define<tab> so the code is consistent with style(9) and avoids mixing the two formats.
2006-12-14 16:53:48 +00:00
#define PCI_INVALID_IRQ 255
#define PCI_INTERRUPT_VALID(x) ((x) != PCI_INVALID_IRQ)
Don't claim to have routed an interrupt when the method actually returned an error.
2002-02-12 01:28:49 +00:00
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/*
* Convenience functions.
*
* These should be used in preference to manually manipulating
* configuration space.
*/
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
static __inline int
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
pci_enable_busmaster(device_t dev)
{
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
return(PCI_ENABLE_BUSMASTER(device_get_parent(dev), dev));
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
}
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
static __inline int
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
pci_disable_busmaster(device_t dev)
{
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
return(PCI_DISABLE_BUSMASTER(device_get_parent(dev), dev));
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
}
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
static __inline int
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
pci_enable_io(device_t dev, int space)
{
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
return(PCI_ENABLE_IO(device_get_parent(dev), dev, space));
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
}
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
static __inline int
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
pci_disable_io(device_t dev, int space)
{
Return status for PCI methods '{enable,disable}_{io,busmaster}'. Reviewed by: imp
2003-04-16 03:15:08 +00:00
return(PCI_DISABLE_IO(device_get_parent(dev), dev, space));
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
provide routines to access VPD data at the PCI layer... remove sk's own implementation, and use the new calls to get the data... Reviewed by: -arch
2006-10-09 16:15:56 +00:00
static __inline int
pci_get_vpd_ident(device_t dev, const char **identptr)
{
return(PCI_GET_VPD_IDENT(device_get_parent(dev), dev, identptr));
}
static __inline int
Update the pci_get_vpd_readonly() wrapper to use 'vptr' instead of 'identptr' for its last parameter to match the default implementation as well as the method definition in pci_if.m.
2012-03-03 14:25:36 +00:00
pci_get_vpd_readonly(device_t dev, const char *kw, const char **vptr)
provide routines to access VPD data at the PCI layer... remove sk's own implementation, and use the new calls to get the data... Reviewed by: -arch
2006-10-09 16:15:56 +00:00
{
Update the pci_get_vpd_readonly() wrapper to use 'vptr' instead of 'identptr' for its last parameter to match the default implementation as well as the method definition in pci_if.m.
2012-03-03 14:25:36 +00:00
return(PCI_GET_VPD_READONLY(device_get_parent(dev), dev, kw, vptr));
provide routines to access VPD data at the PCI layer... remove sk's own implementation, and use the new calls to get the data... Reviewed by: -arch
2006-10-09 16:15:56 +00:00
}
Add pci_is_vga_ioport_range() and pci_is_vga_memory_range() as inline functions. These functions centralize the details of which I/O port and memory ranges belong to VGA. Reviewed by: imp@, jhb@
2005-04-29 02:03:11 +00:00
/*
* Check if the address range falls within the VGA defined address range(s)
*/
static __inline int
pci_is_vga_ioport_range(u_long start, u_long end)
{
return (((start >= 0x3b0 && end <= 0x3bb) ||
(start >= 0x3c0 && end <= 0x3df)) ? 1 : 0);
}
static __inline int
pci_is_vga_memory_range(u_long start, u_long end)
{
return ((start >= 0xa0000 && end <= 0xbffff) ? 1 : 0);
}
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/*
* PCI power states are as defined by ACPI:
*
* D0 State in which device is on and running. It is receiving full
* power from the system and delivering full functionality to the user.
* D1 Class-specific low-power state in which device context may or may not
* be lost. Buses in D1 cannot do anything to the bus that would force
Commit the results of the typo hunt by Darren Pilgrim. This change affects documentation and comments only, no real code involved. PR: misc/101245 Submitted by: Darren Pilgrim <darren pilgrim bitfreak org> Tested by: md5(1) MFC after: 1 week
2006-08-04 07:56:35 +00:00
* devices on that bus to lose context.
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
* D2 Class-specific low-power state in which device context may or may
* not be lost. Attains greater power savings than D1. Buses in D2
Commit the results of the typo hunt by Darren Pilgrim. This change affects documentation and comments only, no real code involved. PR: misc/101245 Submitted by: Darren Pilgrim <darren pilgrim bitfreak org> Tested by: md5(1) MFC after: 1 week
2006-08-04 07:56:35 +00:00
* can cause devices on that bus to lose some context. Devices in D2
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
* must be prepared for the bus to be in D2 or higher.
* D3 State in which the device is off and not running. Device context is
* lost. Power can be removed from the device.
*/
Replace #define<space> with #define<tab> so the code is consistent with style(9) and avoids mixing the two formats.
2006-12-14 16:53:48 +00:00
#define PCI_POWERSTATE_D0 0
#define PCI_POWERSTATE_D1 1
#define PCI_POWERSTATE_D2 2
#define PCI_POWERSTATE_D3 3
#define PCI_POWERSTATE_UNKNOWN -1
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Slightly reimplement some recently added helper functions as methods, so that drivers are not reaching into the internals of the pci bus. There are no driver changes, the public interface is the same.
2001-02-27 23:13:20 +00:00
static __inline int
pci_set_powerstate(device_t dev, int state)
{
return PCI_SET_POWERSTATE(device_get_parent(dev), dev, state);
}
static __inline int
pci_get_powerstate(device_t dev)
{
return PCI_GET_POWERSTATE(device_get_parent(dev), dev);
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Rename pci_find_extcap() to pci_find_cap(). PCI now uses the term "extended capabilities" to refer to the new set of capability structures starting at offset 0x100 in config space for PCI-express devices. For now both function names will still work. I will merge this to older branches to ease driver portability, but 9.0 will ship with a new pci_find_extcap() function that locates extended capabilities instead. Reviewed by: imp MFC after: 1 week
2011-03-22 12:05:49 +00:00
static __inline int
pci_find_cap(device_t dev, int capability, int *capreg)
{
Expand the set of APIs available for locating PCI capabilities: - pci_find_extcap() is repurposed to be used for fetching PCI-express extended capabilities (PCIZ_* constants in <dev/pci/pcireg.h>). - pci_find_htcap() can be used to locate a specific HyperTransport capability (PCIM_HTCAP_* constants in <dev/pci/pcireg.h>). - Cache the starting location of the PCI-express capability for PCI-express devices in PCI device ivars.
2012-03-03 18:08:57 +00:00
return (PCI_FIND_CAP(device_get_parent(dev), dev, capability, capreg));
Rename pci_find_extcap() to pci_find_cap(). PCI now uses the term "extended capabilities" to refer to the new set of capability structures starting at offset 0x100 in config space for PCI-express devices. For now both function names will still work. I will merge this to older branches to ease driver portability, but 9.0 will ship with a new pci_find_extcap() function that locates extended capabilities instead. Reviewed by: imp MFC after: 1 week
2011-03-22 12:05:49 +00:00
}
Add a new method PCI_FIND_EXTCAP() to the pci bus interface that is used to search for a specific extended capability. If the specified capability is found for the given device, then the function returns success and optionally returns the offset of that capability. If the capability is not found, the function returns an error.
2005-12-20 19:57:47 +00:00
static __inline int
pci_find_extcap(device_t dev, int capability, int *capreg)
{
Rename pci_find_extcap() to pci_find_cap(). PCI now uses the term "extended capabilities" to refer to the new set of capability structures starting at offset 0x100 in config space for PCI-express devices. For now both function names will still work. I will merge this to older branches to ease driver portability, but 9.0 will ship with a new pci_find_extcap() function that locates extended capabilities instead. Reviewed by: imp MFC after: 1 week
2011-03-22 12:05:49 +00:00
return (PCI_FIND_EXTCAP(device_get_parent(dev), dev, capability, capreg));
Add a new method PCI_FIND_EXTCAP() to the pci bus interface that is used to search for a specific extended capability. If the specified capability is found for the given device, then the function returns success and optionally returns the offset of that capability. If the capability is not found, the function returns an error.
2005-12-20 19:57:47 +00:00
}
Expand the set of APIs available for locating PCI capabilities: - pci_find_extcap() is repurposed to be used for fetching PCI-express extended capabilities (PCIZ_* constants in <dev/pci/pcireg.h>). - pci_find_htcap() can be used to locate a specific HyperTransport capability (PCIM_HTCAP_* constants in <dev/pci/pcireg.h>). - Cache the starting location of the PCI-express capability for PCI-express devices in PCI device ivars.
2012-03-03 18:08:57 +00:00
static __inline int
pci_find_htcap(device_t dev, int capability, int *capreg)
{
return (PCI_FIND_HTCAP(device_get_parent(dev), dev, capability, capreg));
}
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
2006-11-13 21:47:30 +00:00
static __inline int
pci_alloc_msi(device_t dev, int *count)
{
return (PCI_ALLOC_MSI(device_get_parent(dev), dev, count));
}
Expand the MSI/MSI-X API to address some deficiencies in the MSI-X support. - First off, device drivers really do need to know if they are allocating MSI or MSI-X messages. MSI requires allocating powerof2() messages for example where MSI-X does not. To address this, split out the MSI-X support from pci_msi_count() and pci_alloc_msi() into new driver-visible functions pci_msix_count() and pci_alloc_msix(). As a result, pci_msi_count() now just returns a count of the max supported MSI messages for the device, and pci_alloc_msi() only tries to allocate MSI messages. To get a count of the max supported MSI-X messages, use pci_msix_count(). To allocate MSI-X messages, use pci_alloc_msix(). pci_release_msi() still handles both MSI and MSI-X messages, however. As a result of this change, drivers using the existing API will only use MSI messages and will no longer try to use MSI-X messages. - Because MSI-X allows for each message to have its own data and address values (and thus does not require all of the messages to have their MD vectors allocated as a group), some devices allow for "sparse" use of MSI-X message slots. For example, if a device supports 8 messages but the OS is only able to allocate 2 messages, the device may make the best use of 2 IRQs if it enables the messages at slots 1 and 4 rather than default of using the first N slots (or indicies) at 1 and 2. To support this, add a new pci_remap_msix() function that a driver may call after a successful pci_alloc_msix() (but before allocating any of the SYS_RES_IRQ resources) to allow the allocated IRQ resources to be assigned to different message indices. For example, from the earlier example, after pci_alloc_msix() returned a value of 2, the driver would call pci_remap_msix() passing in array of integers { 1, 4 } as the new message indices to use. The rid's for the SYS_RES_IRQ resources will always match the message indices. Thus, after the call to pci_remap_msix() the driver would be able to access the first message in slot 1 at SYS_RES_IRQ rid 1, and the second message at slot 4 at SYS_RES_IRQ rid 4. Note that the message slots/indices are 1-based rather than 0-based so that they will always correspond to the rid values (SYS_RES_IRQ rid 0 is reserved for the legacy INTx interrupt). To support this API, a new PCIB_REMAP_MSIX() method was added to the pcib interface to change the message index for a single IRQ. Tested by: scottl
2007-01-22 21:48:44 +00:00
static __inline int
pci_alloc_msix(device_t dev, int *count)
{
return (PCI_ALLOC_MSIX(device_get_parent(dev), dev, count));
}
pci: make MSI(-X) enable and disable methods of the PCI bus Make the functions pci_disable_msi, pci_enable_msi and pci_enable_msix methods of the newbus PCI bus. This code should not include any functional change. Sponsored by: Citrix Systems R&D Reviewed by: imp, jhb Differential Revision: https://reviews.freebsd.org/D354 dev/pci/pci.c: - Convert the mentioned functions to newbus methods. - Fix the callers of the converted functions. sys/dev/pci/pci_private.h: dev/pci/pci_if.m: - Declare the new methods. dev/pci/pcivar.h: - Add helpers to call the newbus methods. ofed/include/linux/pci.h: - Add define to prevent the ofed version of pci_enable_msix from clashing with the FreeBSD native version.
2014-08-20 14:57:20 +00:00
static __inline void
pci_enable_msi(device_t dev, uint64_t address, uint16_t data)
{
PCI_ENABLE_MSI(device_get_parent(dev), dev, address, data);
}
static __inline void
pci_enable_msix(device_t dev, u_int index, uint64_t address, uint32_t data)
{
PCI_ENABLE_MSIX(device_get_parent(dev), dev, index, address, data);
}
static __inline void
pci_disable_msi(device_t dev)
{
PCI_DISABLE_MSI(device_get_parent(dev), dev);
}
Expand the MSI/MSI-X API to address some deficiencies in the MSI-X support. - First off, device drivers really do need to know if they are allocating MSI or MSI-X messages. MSI requires allocating powerof2() messages for example where MSI-X does not. To address this, split out the MSI-X support from pci_msi_count() and pci_alloc_msi() into new driver-visible functions pci_msix_count() and pci_alloc_msix(). As a result, pci_msi_count() now just returns a count of the max supported MSI messages for the device, and pci_alloc_msi() only tries to allocate MSI messages. To get a count of the max supported MSI-X messages, use pci_msix_count(). To allocate MSI-X messages, use pci_alloc_msix(). pci_release_msi() still handles both MSI and MSI-X messages, however. As a result of this change, drivers using the existing API will only use MSI messages and will no longer try to use MSI-X messages. - Because MSI-X allows for each message to have its own data and address values (and thus does not require all of the messages to have their MD vectors allocated as a group), some devices allow for "sparse" use of MSI-X message slots. For example, if a device supports 8 messages but the OS is only able to allocate 2 messages, the device may make the best use of 2 IRQs if it enables the messages at slots 1 and 4 rather than default of using the first N slots (or indicies) at 1 and 2. To support this, add a new pci_remap_msix() function that a driver may call after a successful pci_alloc_msix() (but before allocating any of the SYS_RES_IRQ resources) to allow the allocated IRQ resources to be assigned to different message indices. For example, from the earlier example, after pci_alloc_msix() returned a value of 2, the driver would call pci_remap_msix() passing in array of integers { 1, 4 } as the new message indices to use. The rid's for the SYS_RES_IRQ resources will always match the message indices. Thus, after the call to pci_remap_msix() the driver would be able to access the first message in slot 1 at SYS_RES_IRQ rid 1, and the second message at slot 4 at SYS_RES_IRQ rid 4. Note that the message slots/indices are 1-based rather than 0-based so that they will always correspond to the rid values (SYS_RES_IRQ rid 0 is reserved for the legacy INTx interrupt). To support this API, a new PCIB_REMAP_MSIX() method was added to the pcib interface to change the message index for a single IRQ. Tested by: scottl
2007-01-22 21:48:44 +00:00
static __inline int
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
2007-05-02 17:50:36 +00:00
pci_remap_msix(device_t dev, int count, const u_int *vectors)
Expand the MSI/MSI-X API to address some deficiencies in the MSI-X support. - First off, device drivers really do need to know if they are allocating MSI or MSI-X messages. MSI requires allocating powerof2() messages for example where MSI-X does not. To address this, split out the MSI-X support from pci_msi_count() and pci_alloc_msi() into new driver-visible functions pci_msix_count() and pci_alloc_msix(). As a result, pci_msi_count() now just returns a count of the max supported MSI messages for the device, and pci_alloc_msi() only tries to allocate MSI messages. To get a count of the max supported MSI-X messages, use pci_msix_count(). To allocate MSI-X messages, use pci_alloc_msix(). pci_release_msi() still handles both MSI and MSI-X messages, however. As a result of this change, drivers using the existing API will only use MSI messages and will no longer try to use MSI-X messages. - Because MSI-X allows for each message to have its own data and address values (and thus does not require all of the messages to have their MD vectors allocated as a group), some devices allow for "sparse" use of MSI-X message slots. For example, if a device supports 8 messages but the OS is only able to allocate 2 messages, the device may make the best use of 2 IRQs if it enables the messages at slots 1 and 4 rather than default of using the first N slots (or indicies) at 1 and 2. To support this, add a new pci_remap_msix() function that a driver may call after a successful pci_alloc_msix() (but before allocating any of the SYS_RES_IRQ resources) to allow the allocated IRQ resources to be assigned to different message indices. For example, from the earlier example, after pci_alloc_msix() returned a value of 2, the driver would call pci_remap_msix() passing in array of integers { 1, 4 } as the new message indices to use. The rid's for the SYS_RES_IRQ resources will always match the message indices. Thus, after the call to pci_remap_msix() the driver would be able to access the first message in slot 1 at SYS_RES_IRQ rid 1, and the second message at slot 4 at SYS_RES_IRQ rid 4. Note that the message slots/indices are 1-based rather than 0-based so that they will always correspond to the rid values (SYS_RES_IRQ rid 0 is reserved for the legacy INTx interrupt). To support this API, a new PCIB_REMAP_MSIX() method was added to the pcib interface to change the message index for a single IRQ. Tested by: scottl
2007-01-22 21:48:44 +00:00
{
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
2007-05-02 17:50:36 +00:00
return (PCI_REMAP_MSIX(device_get_parent(dev), dev, count, vectors));
Expand the MSI/MSI-X API to address some deficiencies in the MSI-X support. - First off, device drivers really do need to know if they are allocating MSI or MSI-X messages. MSI requires allocating powerof2() messages for example where MSI-X does not. To address this, split out the MSI-X support from pci_msi_count() and pci_alloc_msi() into new driver-visible functions pci_msix_count() and pci_alloc_msix(). As a result, pci_msi_count() now just returns a count of the max supported MSI messages for the device, and pci_alloc_msi() only tries to allocate MSI messages. To get a count of the max supported MSI-X messages, use pci_msix_count(). To allocate MSI-X messages, use pci_alloc_msix(). pci_release_msi() still handles both MSI and MSI-X messages, however. As a result of this change, drivers using the existing API will only use MSI messages and will no longer try to use MSI-X messages. - Because MSI-X allows for each message to have its own data and address values (and thus does not require all of the messages to have their MD vectors allocated as a group), some devices allow for "sparse" use of MSI-X message slots. For example, if a device supports 8 messages but the OS is only able to allocate 2 messages, the device may make the best use of 2 IRQs if it enables the messages at slots 1 and 4 rather than default of using the first N slots (or indicies) at 1 and 2. To support this, add a new pci_remap_msix() function that a driver may call after a successful pci_alloc_msix() (but before allocating any of the SYS_RES_IRQ resources) to allow the allocated IRQ resources to be assigned to different message indices. For example, from the earlier example, after pci_alloc_msix() returned a value of 2, the driver would call pci_remap_msix() passing in array of integers { 1, 4 } as the new message indices to use. The rid's for the SYS_RES_IRQ resources will always match the message indices. Thus, after the call to pci_remap_msix() the driver would be able to access the first message in slot 1 at SYS_RES_IRQ rid 1, and the second message at slot 4 at SYS_RES_IRQ rid 4. Note that the message slots/indices are 1-based rather than 0-based so that they will always correspond to the rid values (SYS_RES_IRQ rid 0 is reserved for the legacy INTx interrupt). To support this API, a new PCIB_REMAP_MSIX() method was added to the pcib interface to change the message index for a single IRQ. Tested by: scottl
2007-01-22 21:48:44 +00:00
}
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
2006-11-13 21:47:30 +00:00
static __inline int
pci_release_msi(device_t dev)
{
return (PCI_RELEASE_MSI(device_get_parent(dev), dev));
}
static __inline int
pci_msi_count(device_t dev)
{
return (PCI_MSI_COUNT(device_get_parent(dev), dev));
}
Expand the MSI/MSI-X API to address some deficiencies in the MSI-X support. - First off, device drivers really do need to know if they are allocating MSI or MSI-X messages. MSI requires allocating powerof2() messages for example where MSI-X does not. To address this, split out the MSI-X support from pci_msi_count() and pci_alloc_msi() into new driver-visible functions pci_msix_count() and pci_alloc_msix(). As a result, pci_msi_count() now just returns a count of the max supported MSI messages for the device, and pci_alloc_msi() only tries to allocate MSI messages. To get a count of the max supported MSI-X messages, use pci_msix_count(). To allocate MSI-X messages, use pci_alloc_msix(). pci_release_msi() still handles both MSI and MSI-X messages, however. As a result of this change, drivers using the existing API will only use MSI messages and will no longer try to use MSI-X messages. - Because MSI-X allows for each message to have its own data and address values (and thus does not require all of the messages to have their MD vectors allocated as a group), some devices allow for "sparse" use of MSI-X message slots. For example, if a device supports 8 messages but the OS is only able to allocate 2 messages, the device may make the best use of 2 IRQs if it enables the messages at slots 1 and 4 rather than default of using the first N slots (or indicies) at 1 and 2. To support this, add a new pci_remap_msix() function that a driver may call after a successful pci_alloc_msix() (but before allocating any of the SYS_RES_IRQ resources) to allow the allocated IRQ resources to be assigned to different message indices. For example, from the earlier example, after pci_alloc_msix() returned a value of 2, the driver would call pci_remap_msix() passing in array of integers { 1, 4 } as the new message indices to use. The rid's for the SYS_RES_IRQ resources will always match the message indices. Thus, after the call to pci_remap_msix() the driver would be able to access the first message in slot 1 at SYS_RES_IRQ rid 1, and the second message at slot 4 at SYS_RES_IRQ rid 4. Note that the message slots/indices are 1-based rather than 0-based so that they will always correspond to the rid values (SYS_RES_IRQ rid 0 is reserved for the legacy INTx interrupt). To support this API, a new PCIB_REMAP_MSIX() method was added to the pcib interface to change the message index for a single IRQ. Tested by: scottl
2007-01-22 21:48:44 +00:00
static __inline int
pci_msix_count(device_t dev)
{
return (PCI_MSIX_COUNT(device_get_parent(dev), dev));
}
Add a method to get the PCI RID for a device. Reviewed by: kib MFC after: 2 months Sponsored by: Sandvine Inc.
2014-04-01 15:47:24 +00:00
static __inline uint16_t
pci_get_rid(device_t dev)
{
return (PCI_GET_RID(device_get_parent(dev), dev));
}
pci: add a new pci_child_added newbus method. This is needed so when running under Xen the calls to pci_child_added can be intercepted and a custom Xen method can be used to register those devices with Xen. This should not include any functional change, since the Xen implementation will be added in a following patch and the native implementation is a noop. Sponsored by: Citrix Systems R&D Reviewed by: jhb dev/pci/pci.c: dev/pci/pci_if.m: dev/pci/pci_private.h: dev/pci/pcivar.h: - Add the pci_child_added newbus method.
2014-08-22 15:05:51 +00:00
static __inline void
pci_child_added(device_t dev)
{
return (PCI_CHILD_ADDED(device_get_parent(dev), dev));
}
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
device_t pci_find_bsf(uint8_t, uint8_t, uint8_t);
Make the PCI code aware of PCI domains (aka PCI segments) so we can support machines having multiple independently numbered PCI domains and don't support reenumeration without ambiguity amongst the devices as seen by the OS and represented by PCI location strings. This includes introducing a function pci_find_dbsf(9) which works like pci_find_bsf(9) but additionally takes a domain number argument and limiting pci_find_bsf(9) to only search devices in domain 0 (the only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order to no longer report false positives when searching for siblings and dupe devices in the same domain respectively. Along with this change the sole host-PCI bridge driver converted to actually make use of PCI domain support is uninorth(4), the others continue to use domain 0 only for now and need to be converted as appropriate later on. Note that this means that the format of the location strings as used by pciconf(8) has been changed and that consumers of <sys/pciio.h> potentially need to be recompiled. Suggested by: jhb Reviewed by: grehan, jhb, marcel Approved by: re (kensmith), jhb (PCI maintainer hat)
2007-09-30 11:05:18 +00:00
device_t pci_find_dbsf(uint32_t, uint8_t, uint8_t, uint8_t);
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
device_t pci_find_device(uint16_t, uint16_t);
Implement pci_find_class(9), the function to find a pci device by its class. Sponsored by: The FreeBSD Foundation Reviewed by: jhb MFC after: 1 week
2011-07-09 14:30:13 +00:00
device_t pci_find_class(uint8_t class, uint8_t subclass);
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
2006-11-13 21:47:30 +00:00
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
2007-05-02 17:50:36 +00:00
/* Can be used by drivers to manage the MSI-X table. */
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
2006-11-13 21:47:30 +00:00
int pci_pending_msix(device_t dev, u_int index);
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage. The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system. MFC after: 1 month
2007-05-02 17:50:36 +00:00
Add a first pass at a way to blacklist MSI on systems where it doesn't work: - A new PCI quirk (PCI_QUIRK_DISABLE_MSI) is added to the quirk table. - A new pci_msi_device_blacklisted() determines if a passed in device matches an MSI quirk in the quirk table. This can be overridden (all quirks ignored) by setting the hw.pci.honor_msi_blacklist to 0. - A global blacklist check is performed in the MI PCI bus code by checking to see if the device at 0:0:0 is blacklisted. Tested by: jdp
2006-12-14 19:57:06 +00:00
int pci_msi_device_blacklisted(device_t dev);
- As it turns out, not only MSI-X is broken for devices passed through by VMware up to at least ESXi 5.1. Actually, using INTx in that case instead may still result in interrupt storms, with MSI being the only working option in some configurations. So introduce a PCI_QUIRK_DISABLE_MSIX quirk which only blacklists MSI-X but not also MSI and use it for the VMware PCI-PCI-bridges. Note that, currently, we still assume that if MSI doesn't work, MSI-X won't work either - but that's part of the internal logic and not guaranteed as part of the API contract. While at it, add and employ a pci_has_quirk() helper. Reported and tested by: Paul Bucher - Use NULL instead of 0 for pointers. Submitted by: jhb (mostly) Approved by: jhb MFC after: 3 days
2013-07-09 23:12:26 +00:00
int pci_msix_device_blacklisted(device_t dev);
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
2006-11-13 21:47:30 +00:00
SATA device on some nForce based boards could get confused if MSI is not used but MSI to HyperTransport IRQ mapping is enabled, and would act as if MSI is turned on, resulting in interrupt loss. This commit will, 1. enable MSI mapping on a device only when MSI is enabled for that device and the MSI address matches the HT mapping window. 2. enable MSI mapping on a bridge only when a downstream device is allocated an MSI address in the mapping window PR: kern/118842 Reviewed by: jhb MFC after: 1 week
2008-07-23 09:44:36 +00:00
void pci_ht_map_msi(device_t dev, uint64_t addr);
Add a new helper function for PCI devices to locate the upstream PCI-express root port of a given PCI device. Reviewed by: kib, imp MFC after: 1 week Sponsored by: Chelsio Differential Revision: https://reviews.freebsd.org/D4089
2015-11-05 21:27:25 +00:00
device_t pci_find_pcie_root_port(device_t dev);
Add pci_get|set_max_read_req() helper functions to control maximum PCIe read request size. Reviewed by: jhb@
2010-02-05 17:18:48 +00:00
int pci_get_max_read_req(device_t dev);
Add pci_save_state() and pci_restore_state() wrappers around pci_cfg_save() and pci_cfg_restore() for device drivers to use when saving and restoring state (e.g. to handle device-specific resets). Reviewed by: imp MFC after: 2 weeks
2012-03-01 20:20:55 +00:00
void pci_restore_state(device_t dev);
void pci_save_state(device_t dev);
Add pci_get|set_max_read_req() helper functions to control maximum PCIe read request size. Reviewed by: jhb@
2010-02-05 17:18:48 +00:00
int pci_set_max_read_req(device_t dev, int size);
Add helper routines for PCI device drivers to read, write, and modify PCI-Express capability registers (that is, PCI config registers in the standard PCI config space belonging to the PCI-Express capability register set). Note that all of the current PCI-e registers are either 16 or 32-bits, so only widths of 2 or 4 bytes are supported. Reviewed by: imp MFC after: 1 week Sponsored by: Chelsio Differential Revision: https://reviews.freebsd.org/D4088
2015-11-05 21:26:06 +00:00
uint32_t pcie_read_config(device_t dev, int reg, int width);
void pcie_write_config(device_t dev, int reg, uint32_t value, int width);
uint32_t pcie_adjust_config(device_t dev, int reg, uint32_t mask,
uint32_t value, int width);
Add pci_get|set_max_read_req() helper functions to control maximum PCIe read request size. Reviewed by: jhb@
2010-02-05 17:18:48 +00:00
Move the PCI_DMA_BOUNDARY definition into the pcivar.h. Reviewed by: jhb Sponsored by: The FreeBSD Foundation MFC after: 1 week
2013-10-24 20:21:37 +00:00
#ifdef BUS_SPACE_MAXADDR
#if (BUS_SPACE_MAXADDR > 0xFFFFFFFF)
#define PCI_DMA_BOUNDARY 0x100000000
#else
#define PCI_DMA_BOUNDARY 0
#endif
#endif
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
#endif /* _SYS_BUS_H_ */
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) Files moved here from sys/i386/pci, since they are meant to be architecture independent.
1995-02-01 22:56:55 +00:00
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/*
* cdev switch for control device, initialised in generic PCI code
*/
extern struct cdevsw pcicdev;
On the alpha, ports may be allocated above 64k. Change the port address argument to pci_map_port to pci_port_t* which is defined as u_int on the alpha, u_short on i386. This is a stopgap with a hopefully limited lifetime. Discussed with: Stefan Esser <se@freebsd.org>
1998-07-22 08:39:08 +00:00
Next round of PCI subsystem updates: - Break out the /dev/pci driver into a separate file. - Kill the COMPAT_OLDPCI support. - Make the EISA bridge attach a bit more like the old code; explicitly check for the existence of eisa0/isa0 and only attach if they don't already exist. Only make one bus_generic_attach() pass over the bridge, once both busses are attached. Note that the stupid Intel bridge's class is entirely unpredictable. - Add prototypes and re-layout the core PCI modules in line with current coding standards (not a major whitespace change, just moving the module data to the top of the file). - Remove redundant type-2 bridge support from the core PCI code; the PCI-CardBus code does this itself internally. Remove the now entirely redundant header-class-specific support, as well as the secondary and subordinate bus number fields. These are bridge attributes now. - Add support for PCI Extended Capabilities. - Add support for PCI Power Management. The interface currently allows a driver to query and set the power state of a device. - Add helper functions to allow drivers to enable/disable busmastering and the decoding of I/O and memory ranges. - Use PCI_SLOTMAX and PCI_FUNCMAX rather than magic numbers in some places. - Make the PCI-PCI bridge code a little more paranoid about valid I/O and memory decodes. - Add some more PCI register definitions for the command and status registers. Correct another bogus definition for type-1 bridges.
2000-12-13 01:25:11 +00:00
/*
* List of all PCI devices, generation count for the list.
*/
Don't put variable declarations in header files, put prototypes. 'pci_devq' provides useful information now.
2001-12-19 08:49:11 +00:00
STAILQ_HEAD(devlist, pci_devinfo);
extern struct devlist pci_devq;
Prefer the uintXX_t to the u_intXX_t names.
2003-08-22 03:11:53 +00:00
extern uint32_t pci_generation;
Replace the pcidevice_set linker set based configuration mechanism for old style pci drivers with a simple one-line change to use a module that registers itself under new-bus and should in theory enable just about all of the pci drivers to be loadable (kldload and loader(8)) but without having the impact of converting the APIs yet. This also fixes the problem of having undefined variables when only new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
Explicitly track the state of all known BARs for each PCI device. The PCI bus driver will now remember the size of a BAR obtained during the initial bus scan and use that size when doing lazy resource allocation rather than resizing the BAR. The bus driver will now also report unallocated BARs to userland for display by 'pciconf -lb'. Psuedo-resources that are not BARs (such as the implicit I/O port resources for master/slave ATA controllers) will no longer be listed as BARs in 'pciconf -lb'. During resume, BARs are restored from their new saved state instead of having the raw registers saved and restored across resume. This also fixes restoring BARs at unusual loactions if said BAR has been allocated by a driver. Add a constant for the offset of the ROM BIOS BAR in PCI-PCI bridges and properly handle ROM BIOS BARs in PCI-PCI bridges. The PCI bus now also properly handles the lack of a ROM BIOS BAR in a PCI-Cardbus bridge. Tested by: jkim
2011-03-31 13:22:12 +00:00
struct pci_map *pci_find_bar(device_t dev, int reg);
int pci_bar_enabled(device_t dev, struct pci_map *pm);
Add support for displaying VPD for PCI devices via pciconf. - Store the length of each read-only VPD value since not all values are guaranteed to be ASCII values (though most are). - Add a new pciio ioctl to fetch VPD for a single PCI device. The values are returned as a list of variable length records, one for the device name and each keyword. - Add a new -V flag to pciconf's list mode which displays VPD data for each device. MFC after: 1 week
2014-01-20 20:56:09 +00:00
struct pcicfg_vpd *pci_fetch_vpd_list(device_t dev);
Explicitly track the state of all known BARs for each PCI device. The PCI bus driver will now remember the size of a BAR obtained during the initial bus scan and use that size when doing lazy resource allocation rather than resizing the BAR. The bus driver will now also report unallocated BARs to userland for display by 'pciconf -lb'. Psuedo-resources that are not BARs (such as the implicit I/O port resources for master/slave ATA controllers) will no longer be listed as BARs in 'pciconf -lb'. During resume, BARs are restored from their new saved state instead of having the raw registers saved and restored across resume. This also fixes restoring BARs at unusual loactions if said BAR has been allocated by a driver. Add a constant for the offset of the ROM BIOS BAR in PCI-PCI bridges and properly handle ROM BIOS BARs in PCI-PCI bridges. The PCI bus now also properly handles the lack of a ROM BIOS BAR in a PCI-Cardbus bridge. Tested by: jkim
2011-03-31 13:22:12 +00:00
vga_pci: Add API to map the Video BIOS Here are two new functions to map and unmap the Video BIOS: void * vga_pci_map_bios(device_t dev, size_t *size); void vga_pci_unmap_bios(device_t dev, void *bios); The BIOS is either taken from the shadow copy made by the System BIOS at boot time if the given device was used for the default display (i386, amd64 and ia64 only), or from the PCI expansion ROM. Additionally, one can determine if a given device was the default display at boot time using the following new function: void vga_pci_unmap_bios(device_t dev, void *bios);
2013-08-25 18:09:11 +00:00
#define VGA_PCI_BIOS_SHADOW_ADDR 0xC0000
#define VGA_PCI_BIOS_SHADOW_SIZE 131072
int vga_pci_is_boot_display(device_t dev);
void * vga_pci_map_bios(device_t dev, size_t *size);
void vga_pci_unmap_bios(device_t dev, void *bios);
vgapci: New vga_pci_repost() function This can be used to restore the VGA mode after a KMS driver is unloaded. Differential Revision: https://reviews.freebsd.org/D687
2015-03-01 12:47:36 +00:00
int vga_pci_repost(device_t dev);
vga_pci: Add API to map the Video BIOS Here are two new functions to map and unmap the Video BIOS: void * vga_pci_map_bios(device_t dev, size_t *size); void vga_pci_unmap_bios(device_t dev, void *bios); The BIOS is either taken from the shadow copy made by the System BIOS at boot time if the given device was used for the default display (i386, amd64 and ia64 only), or from the PCI expansion ROM. Additionally, one can determine if a given device was the default display at boot time using the following new function: void vga_pci_unmap_bios(device_t dev, void *bios);
2013-08-25 18:09:11 +00:00
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#endif /* _PCIVAR_H_ */
Reference in New Issue Copy Permalink