d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9ed8ded4d3
freebsd-skq/sys/dev/pci/pcivar.h

331 lines
11 KiB
C
Raw Normal View History

Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
*
*/
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#ifndef _PCIVAR_H_
#define _PCIVAR_H_
#include <sys/queue.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* some PCI bus constants */
#define PCI_BUSMAX 255 /* highest supported bus number */
#define PCI_SLOTMAX 31 /* highest supported slot number */
#define PCI_FUNCMAX 7 /* highest supported function number */
#define PCI_REGMAX 255 /* highest supported config register addr. */
#define PCI_MAXMAPS_0 6 /* max. no. of memory/port maps */
#define PCI_MAXMAPS_1 2 /* max. no. of maps for PCI to PCI bridge */
#define PCI_MAXMAPS_2 1 /* max. no. of maps for CardBus bridge */
/* pci_addr_t covers this system's PCI bus address space: 32 or 64 bit */
#ifdef PCI_A64
typedef u_int64_t pci_addr_t; /* u_int64_t for system with 64bit addresses */
#else
typedef u_int32_t pci_addr_t; /* u_int64_t for system with 64bit addresses */
#endif
/* config header information common to all header types */
typedef struct pcicfg {
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
struct device *dev; /* device which owns this */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
void *hdrspec; /* pointer to header type specific data */
u_int16_t subvendor; /* card vendor ID */
u_int16_t subdevice; /* card device ID, assigned by card vendor */
u_int16_t vendor; /* chip vendor ID */
u_int16_t device; /* chip device ID, assigned by chip vendor */
u_int16_t cmdreg; /* disable/enable chip and PCI options */
u_int16_t statreg; /* supported PCI features and error state */
Use "baseclass" instead of "class" for storing the contents of PCI register 0xB so that C++ programs can use the PCI conf interface.
1998-08-13 19:12:20 +00:00
u_int8_t baseclass; /* chip PCI class */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
u_int8_t subclass; /* chip PCI subclass */
u_int8_t progif; /* chip PCI programming interface */
u_int8_t revid; /* chip revision ID */
u_int8_t hdrtype; /* chip config header type */
u_int8_t cachelnsz; /* cache line size in 4byte units */
u_int8_t intpin; /* PCI interrupt pin */
u_int8_t intline; /* interrupt line (IRQ for PC arch) */
u_int8_t mingnt; /* min. useful bus grant time in 250ns units */
u_int8_t maxlat; /* max. tolerated bus grant latency in 250ns */
u_int8_t lattimer; /* latency timer in units of 30ns bus cycles */
u_int8_t mfdev; /* multi-function device (from hdrtype reg) */
u_int8_t nummaps; /* actual number of PCI maps used */
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
u_int8_t hose; /* hose which bus is attached to */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
u_int8_t bus; /* config space bus address */
u_int8_t slot; /* config space slot address */
u_int8_t func; /* config space function number */
u_int8_t secondarybus; /* bus on secondary side of bridge, if any */
u_int8_t subordinatebus; /* topmost bus number behind bridge, if any */
} pcicfgregs;
/* additional type 1 device config header information (PCI to PCI bridge) */
#ifdef PCI_A64
#define PCI_PPBMEMBASE(h,l) ((((pci_addr_t)(h) << 32) + ((l)<<16)) & ~0xfffff)
#define PCI_PPBMEMLIMIT(h,l) ((((pci_addr_t)(h) << 32) + ((l)<<16)) | 0xfffff)
#else
#define PCI_PPBMEMBASE(h,l) (((l)<<16) & ~0xfffff)
#define PCI_PPBMEMLIMIT(h,l) (((l)<<16) | 0xfffff)
#endif /* PCI_A64 */
#define PCI_PPBIOBASE(h,l) ((((h)<<16) + ((l)<<8)) & ~0xfff)
#define PCI_PPBIOLIMIT(h,l) ((((h)<<16) + ((l)<<8)) | 0xfff)
typedef struct {
pci_addr_t pmembase; /* base address of prefetchable memory */
pci_addr_t pmemlimit; /* topmost address of prefetchable memory */
u_int32_t membase; /* base address of memory window */
u_int32_t memlimit; /* topmost address of memory window */
u_int32_t iobase; /* base address of port window */
u_int32_t iolimit; /* topmost address of port window */
u_int16_t secstat; /* secondary bus status register */
u_int16_t bridgectl; /* bridge control register */
u_int8_t seclat; /* CardBus latency timer */
} pcih1cfgregs;
/* additional type 2 device config header information (CardBus bridge) */
typedef struct {
u_int32_t membase0; /* base address of memory window */
u_int32_t memlimit0; /* topmost address of memory window */
u_int32_t membase1; /* base address of memory window */
u_int32_t memlimit1; /* topmost address of memory window */
u_int32_t iobase0; /* base address of port window */
u_int32_t iolimit0; /* topmost address of port window */
u_int32_t iobase1; /* base address of port window */
u_int32_t iolimit1; /* topmost address of port window */
u_int32_t pccardif; /* PC Card 16bit IF legacy more base addr. */
u_int16_t secstat; /* secondary bus status register */
u_int16_t bridgectl; /* bridge control register */
u_int8_t seclat; /* CardBus latency timer */
} pcih2cfgregs;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
extern u_int32_t pci_numdevs;
Encapsulate the old PCI compatability support and APIs completely under "options COMPAT_OLDPCI". This option already existed, but now also tidies up the declarations in #include <pci/pci*.h>. It is amazing how much stuff was using the old pre-FreeBSD 3.x names and going silently undetected.
2000-05-28 16:35:57 +00:00
/* Only if the prerequisites are present */
#if defined(_SYS_BUS_H_) && defined(_SYS_PCIIO_H_)
struct pci_devinfo {
STAILQ_ENTRY(pci_devinfo) pci_links;
struct resource_list resources;
pcicfgregs cfg;
struct pci_conf conf;
};
#endif
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* externally visible functions */
Make the usb and ide/ata device identification a little saner. Rather than attaching to the device via chip*, use the newbus nomatch method to report the device. This leaves them unattached so that a driver can be easily loaded to grab them later.
1999-12-10 17:44:22 +00:00
const char *pci_ata_match(struct device *dev);
const char *pci_usb_match(struct device *dev);
Remove the vga-pci driver. It serves no purpose and it hides the hardware from useful drivers such as the 3D DRI drivers I will be porting for hardware accelerated OpenGL. The hardware will still be reported during boot using the nomatch system. Approved by: jkh
2000-02-19 09:44:06 +00:00
const char *pci_vga_match(struct device *dev);
Nuke the useless chip driver. It gets in the way when you want to load a functional driver for the device.
2000-06-09 16:00:29 +00:00
const char *pci_chip_match(struct device *dev);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* low level PCI config register functions provided by pcibus.c */
int pci_cfgread (pcicfgregs *cfg, int reg, int bytes);
void pci_cfgwrite (pcicfgregs *cfg, int reg, int data, int bytes);
Add functions for accessing dense and bwx memory for pci devices. These routines are necessary to allow the use of certain types of hardware on the alpha, particularly a Myrinet card. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-10-06 14:18:40 +00:00
#ifdef __alpha__
vm_offset_t pci_cvt_to_dense (vm_offset_t);
vm_offset_t pci_cvt_to_bwx (vm_offset_t);
#endif /* __alpha__ */
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
On the new Meteor cards, the Philips SAA 7116 is connected to the PCI bus via an IBM PCI-PCI bridge (82351 or 82352 or 82353) The driver must identify if it is on a secondary PCI bus, which is created via the IBM PCI-PCI bridge. If it is, then it must initialise the IBM PCI-PCI bridge correctly. To do this, the following new functions are added. Because they use the pcici_t tag, they are considered 2.2 compatibility APIs pcici_t * pci_get_parent_from_tag(pcici_t tag); int pci_get_bus_from_tag(pcici_t tag); (The _from_tag suffix is used to prevent clashes with similarly named newbus PCI API functions) Submitted by: Anton Berezin <tobez@plab.ku.dk> Reviewed by: Doug Rabson <dfr@nlsystems.com> Reworked by: Me (roger)
1999-05-31 22:13:37 +00:00
/* low level devlist operations for the 2.2 compatibility code in pci.c */
pcicfgregs * pci_devlist_get_parent(pcicfgregs *cfg);
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
#ifdef _SYS_BUS_H_
#include "pci_if.h"
* Implement bus_set/get/delete_resource for pci. * Change the hack used on the alpha for mapping devices into DENSE or BWX memory spaces to a simpler one. Its still a hack and should be a seperate api to explicitly map the resource. * Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
/*
* Define pci-specific resource flags for accessing memory via dense
* or bwx memory spaces. These flags are ignored on i386.
*/
#define PCI_RF_DENSE 0x10000
#define PCI_RF_BWX 0x20000
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
enum pci_device_ivars {
PCI_IVAR_SUBVENDOR,
PCI_IVAR_SUBDEVICE,
PCI_IVAR_VENDOR,
PCI_IVAR_DEVICE,
PCI_IVAR_DEVID,
PCI_IVAR_CLASS,
PCI_IVAR_SUBCLASS,
PCI_IVAR_PROGIF,
PCI_IVAR_REVID,
PCI_IVAR_INTPIN,
PCI_IVAR_IRQ,
PCI_IVAR_BUS,
PCI_IVAR_SLOT,
PCI_IVAR_FUNCTION,
PCI_IVAR_SECONDARYBUS,
PCI_IVAR_SUBORDINATEBUS,
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
PCI_IVAR_HOSE,
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
};
/*
* Simplified accessors for pci devices
*/
#define PCI_ACCESSOR(A, B, T) \
\
static __inline T pci_get_ ## A(device_t dev) \
{ \
uintptr_t v; \
BUS_READ_IVAR(device_get_parent(dev), dev, PCI_IVAR_ ## B, &v); \
return (T) v; \
} \
\
static __inline void pci_set_ ## A(device_t dev, T t) \
{ \
u_long v = (u_long) t; \
BUS_WRITE_IVAR(device_get_parent(dev), dev, PCI_IVAR_ ## B, v); \
}
PCI_ACCESSOR(subvendor, SUBVENDOR, u_int16_t)
PCI_ACCESSOR(subdevice, SUBDEVICE, u_int16_t)
PCI_ACCESSOR(vendor, VENDOR, u_int16_t)
PCI_ACCESSOR(device, DEVICE, u_int16_t)
PCI_ACCESSOR(devid, DEVID, u_int32_t)
PCI_ACCESSOR(class, CLASS, u_int8_t)
PCI_ACCESSOR(subclass, SUBCLASS, u_int8_t)
PCI_ACCESSOR(progif, PROGIF, u_int8_t)
PCI_ACCESSOR(revid, REVID, u_int8_t)
PCI_ACCESSOR(intpin, INTPIN, u_int8_t)
PCI_ACCESSOR(irq, IRQ, u_int8_t)
PCI_ACCESSOR(bus, BUS, u_int8_t)
PCI_ACCESSOR(slot, SLOT, u_int8_t)
PCI_ACCESSOR(function, FUNCTION, u_int8_t)
PCI_ACCESSOR(secondarybus, SECONDARYBUS, u_int8_t)
PCI_ACCESSOR(subordinatebus, SUBORDINATEBUS, u_int8_t)
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
PCI_ACCESSOR(hose, HOSE, u_int32_t)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
static __inline u_int32_t
pci_read_config(device_t dev, int reg, int width)
{
return PCI_READ_CONFIG(device_get_parent(dev), dev, reg, width);
}
static __inline void
pci_write_config(device_t dev, int reg, u_int32_t val, int width)
{
PCI_WRITE_CONFIG(device_get_parent(dev), dev, reg, val, width);
}
Add support for multiple PCI "hoses" used on various alpha platforms. The specific intent of this commit is to pave the way for importing Compaq XP1000 support. These changes should not affect the i386 port. Reviewed by: Doug Rabson <dfr@nlsystems.com> (actually, he walked me through most of it & deserves more than reviewd-by credit )
1999-05-20 15:33:33 +00:00
/*
* Ivars for pci bridges.
*/
/*typedef enum pci_device_ivars pcib_device_ivars;*/
enum pcib_device_ivars {
PCIB_IVAR_HOSE,
};
#define PCIB_ACCESSOR(A, B, T) \
\
static __inline T pcib_get_ ## A(device_t dev) \
{ \
uintptr_t v; \
BUS_READ_IVAR(device_get_parent(dev), dev, PCIB_IVAR_ ## B, &v); \
return (T) v; \
} \
\
static __inline void pcib_set_ ## A(device_t dev, T t) \
{ \
u_long v = (u_long) t; \
BUS_WRITE_IVAR(device_get_parent(dev), dev, PCIB_IVAR_ ## B, v); \
}
PCIB_ACCESSOR(hose, HOSE, u_int32_t)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
#endif
Encapsulate the old PCI compatability support and APIs completely under "options COMPAT_OLDPCI". This option already existed, but now also tidies up the declarations in #include <pci/pci*.h>. It is amazing how much stuff was using the old pre-FreeBSD 3.x names and going silently undetected.
2000-05-28 16:35:57 +00:00
/* for compatibility to FreeBSD-2.2 and 3.x versions of PCI code */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Bandaid for src/sys/modules which broke world
2000-03-20 01:22:27 +00:00
#if defined(_KERNEL) && !defined(KLD_MODULE)
Connect the ISA and PCI compatability shims to an option. In this case it's options COMPAT_OLDISA and COMPAT_OLDPCI. This is meant to be a fairly strong incentive to update the older drivers to newbus, but doesn't (quite) leave anybody hanging with no hardware support. I was talking with a few folks and I was encouraged to simply break or disable the shims but that was a bit too drastic for my liking.
2000-03-19 13:07:12 +00:00
#include "opt_compat_oldpci.h"
#endif
Encapsulate the old PCI compatability support and APIs completely under "options COMPAT_OLDPCI". This option already existed, but now also tidies up the declarations in #include <pci/pci*.h>. It is amazing how much stuff was using the old pre-FreeBSD 3.x names and going silently undetected.
2000-05-28 16:35:57 +00:00
#ifdef COMPAT_OLDPCI
Connect the ISA and PCI compatability shims to an option. In this case it's options COMPAT_OLDISA and COMPAT_OLDPCI. This is meant to be a fairly strong incentive to update the older drivers to newbus, but doesn't (quite) leave anybody hanging with no hardware support. I was talking with a few folks and I was encouraged to simply break or disable the shims but that was a bit too drastic for my liking.
2000-03-19 13:07:12 +00:00
/* all this is going some day */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
typedef pcicfgregs *pcici_t;
typedef unsigned pcidi_t;
typedef void pci_inthand_t(void *arg);
#define pci_max_burst_len (3)
/* just copied from old PCI code for now ... */
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) Files moved here from sys/i386/pci, since they are meant to be architecture independent.
1995-02-01 22:56:55 +00:00
struct pci_device {
char* pd_name;
pci_device pd_probe function changed from returning char * to returning const char *. Originally I was going to add casts from const char * to char * in some of the pci device drivers, but the reality is that the pci device probes return constant quoted strings.
1998-12-14 05:47:29 +00:00
const char* (*pd_probe ) (pcici_t tag, pcidi_t type);
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) Files moved here from sys/i386/pci, since they are meant to be architecture independent.
1995-02-01 22:56:55 +00:00
void (*pd_attach) (pcici_t tag, int unit);
u_long *pd_count;
Remove devconf, it never grew up to be of any use.
1996-09-06 23:09:20 +00:00
int (*pd_shutdown) (int, int);
Reviewed by: se Submitted by: wolf (Wolfgang Stanglmeier) Files moved here from sys/i386/pci, since they are meant to be architecture independent.
1995-02-01 22:56:55 +00:00
};
On the alpha, ports may be allocated above 64k. Change the port address argument to pci_map_port to pci_port_t* which is defined as u_int on the alpha, u_short on i386. This is a stopgap with a hopefully limited lifetime. Discussed with: Stefan Esser <se@freebsd.org>
1998-07-22 08:39:08 +00:00
#ifdef __i386__
typedef u_short pci_port_t;
#else
typedef u_int pci_port_t;
#endif
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
u_long pci_conf_read (pcici_t tag, u_long reg);
void pci_conf_write (pcici_t tag, u_long reg, u_long data);
On the alpha, ports may be allocated above 64k. Change the port address argument to pci_map_port to pci_port_t* which is defined as u_int on the alpha, u_short on i386. This is a stopgap with a hopefully limited lifetime. Discussed with: Stefan Esser <se@freebsd.org>
1998-07-22 08:39:08 +00:00
int pci_map_port (pcici_t tag, u_long reg, pci_port_t* pa);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
int pci_map_mem (pcici_t tag, u_long reg, vm_offset_t* va, vm_offset_t* pa);
Let drivers specify interrupt flags (INTR_EXCL and/or INTR_FAST) using the new pci_map_int_right() variant of pci_map_int(). Fast interrupts work for PCI devices if and only if they are exclusive. (The PCI interrupt mux doesn't support fast interrupts and can't support a mixture of fast and slow interrupts even in principle.) Don't assume that intrmask_t == unsigned in pci_map_int().
1999-01-13 04:59:19 +00:00
int pci_map_int (pcici_t tag, pci_inthand_t *handler, void *arg,
intrmask_t *maskptr);
int pci_map_int_right(pcici_t cfg, pci_inthand_t *handler, void *arg,
intrmask_t *maskptr, u_int flags);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
int pci_unmap_int (pcici_t tag);
On the new Meteor cards, the Philips SAA 7116 is connected to the PCI bus via an IBM PCI-PCI bridge (82351 or 82352 or 82353) The driver must identify if it is on a secondary PCI bus, which is created via the IBM PCI-PCI bridge. If it is, then it must initialise the IBM PCI-PCI bridge correctly. To do this, the following new functions are added. Because they use the pcici_t tag, they are considered 2.2 compatibility APIs pcici_t * pci_get_parent_from_tag(pcici_t tag); int pci_get_bus_from_tag(pcici_t tag); (The _from_tag suffix is used to prevent clashes with similarly named newbus PCI API functions) Submitted by: Anton Berezin <tobez@plab.ku.dk> Reviewed by: Doug Rabson <dfr@nlsystems.com> Reworked by: Me (roger)
1999-05-31 22:13:37 +00:00
pcici_t pci_get_parent_from_tag(pcici_t tag);
int pci_get_bus_from_tag(pcici_t tag);
Fix a goof on my part; s/struct moduledata */struct module */
1999-05-06 22:05:39 +00:00
struct module;
int compat_pci_handler (struct module *, int, void *);
Replace the pcidevice_set linker set based configuration mechanism for old style pci drivers with a simple one-line change to use a module that registers itself under new-bus and should in theory enable just about all of the pci drivers to be loadable (kldload and loader(8)) but without having the impact of converting the APIs yet. This also fixes the problem of having undefined variables when only new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
#define COMPAT_PCI_DRIVER(name, pcidata) \
static moduledata_t name##_mod = { \
#name, \
compat_pci_handler, \
&pcidata \
}; \
DECLARE_MODULE(name, name##_mod, SI_SUB_DRIVERS, SI_ORDER_ANY)
Encapsulate the old PCI compatability support and APIs completely under "options COMPAT_OLDPCI". This option already existed, but now also tidies up the declarations in #include <pci/pci*.h>. It is amazing how much stuff was using the old pre-FreeBSD 3.x names and going silently undetected.
2000-05-28 16:35:57 +00:00
#endif /* COMPAT_OLDPCI */
Replace the pcidevice_set linker set based configuration mechanism for old style pci drivers with a simple one-line change to use a module that registers itself under new-bus and should in theory enable just about all of the pci drivers to be loadable (kldload and loader(8)) but without having the impact of converting the APIs yet. This also fixes the problem of having undefined variables when only new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#endif /* _PCIVAR_H_ */
Reference in New Issue Copy Permalink