freebsd-skq/sys/netinet/sctp_sysctl.h

551 lines
22 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2007, by Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
* Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* a) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* b) Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the distribution.
*
* c) Neither the name of Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#ifndef _NETINET_SCTP_SYSCTL_H_
#define _NETINET_SCTP_SYSCTL_H_
#include <netinet/sctp_os.h>
#include <netinet/sctp_constants.h>
struct sctp_sysctl {
uint32_t sctp_sendspace;
uint32_t sctp_recvspace;
uint32_t sctp_auto_asconf;
uint32_t sctp_multiple_asconfs;
uint32_t sctp_ecn_enable;
uint32_t sctp_fr_max_burst_default;
uint32_t sctp_strict_sacks;
uint32_t sctp_peer_chunk_oh;
uint32_t sctp_max_burst_default;
uint32_t sctp_max_chunks_on_queue;
uint32_t sctp_hashtblsize;
uint32_t sctp_pcbtblsize;
uint32_t sctp_min_split_point;
uint32_t sctp_chunkscale;
uint32_t sctp_delayed_sack_time_default;
uint32_t sctp_sack_freq_default;
uint32_t sctp_system_free_resc_limit;
uint32_t sctp_asoc_free_resc_limit;
uint32_t sctp_heartbeat_interval_default;
uint32_t sctp_pmtu_raise_time_default;
uint32_t sctp_shutdown_guard_time_default;
uint32_t sctp_secret_lifetime_default;
uint32_t sctp_rto_max_default;
uint32_t sctp_rto_min_default;
uint32_t sctp_rto_initial_default;
uint32_t sctp_init_rto_max_default;
uint32_t sctp_valid_cookie_life_default;
uint32_t sctp_init_rtx_max_default;
uint32_t sctp_assoc_rtx_max_default;
uint32_t sctp_path_rtx_max_default;
uint32_t sctp_path_pf_threshold;
uint32_t sctp_add_more_threshold;
uint32_t sctp_nr_outgoing_streams_default;
uint32_t sctp_cmt_on_off;
uint32_t sctp_cmt_use_dac;
/* EY 5/5/08 - nr_sack flag variable */
uint32_t sctp_nr_sack_on_off;
uint32_t sctp_use_cwnd_based_maxburst;
uint32_t sctp_asconf_auth_nochk;
uint32_t sctp_auth_disable;
uint32_t sctp_nat_friendly;
uint32_t sctp_L2_abc_variable;
uint32_t sctp_mbuf_threshold_count;
uint32_t sctp_do_drain;
uint32_t sctp_hb_maxburst;
uint32_t sctp_abort_if_one_2_one_hits_limit;
uint32_t sctp_strict_data_order;
uint32_t sctp_min_residual;
uint32_t sctp_max_retran_chunk;
uint32_t sctp_logging_level;
/* JRS - Variable for default congestion control module */
uint32_t sctp_default_cc_module;
/* RS - Variable for default stream scheduling module */
uint32_t sctp_default_ss_module;
uint32_t sctp_default_frag_interleave;
uint32_t sctp_mobility_base;
uint32_t sctp_mobility_fasthandoff;
uint32_t sctp_inits_include_nat_friendly;
uint32_t sctp_rttvar_bw;
uint32_t sctp_rttvar_rtt;
uint32_t sctp_rttvar_eqret;
uint32_t sctp_steady_step;
uint32_t sctp_use_dccc_ecn;
#if defined(SCTP_LOCAL_TRACE_BUF)
struct sctp_log sctp_log;
#endif
uint32_t sctp_udp_tunneling_port;
uint32_t sctp_enable_sack_immediately;
uint32_t sctp_vtag_time_wait;
uint32_t sctp_buffer_splitting;
uint32_t sctp_initial_cwnd;
uint32_t sctp_blackhole;
#if defined(SCTP_DEBUG)
uint32_t sctp_debug_on;
#endif
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
uint32_t sctp_output_unlocked;
#endif
};
/*
* limits for the sysctl variables
*/
/* maxdgram: Maximum outgoing SCTP buffer size */
#define SCTPCTL_MAXDGRAM_DESC "Maximum outgoing SCTP buffer size"
#define SCTPCTL_MAXDGRAM_MIN 0
#define SCTPCTL_MAXDGRAM_MAX 0xFFFFFFFF
#define SCTPCTL_MAXDGRAM_DEFAULT 262144 /* 256k */
/* recvspace: Maximum incoming SCTP buffer size */
#define SCTPCTL_RECVSPACE_DESC "Maximum incoming SCTP buffer size"
#define SCTPCTL_RECVSPACE_MIN 0
#define SCTPCTL_RECVSPACE_MAX 0xFFFFFFFF
#define SCTPCTL_RECVSPACE_DEFAULT 262144 /* 256k */
/* autoasconf: Enable SCTP Auto-ASCONF */
#define SCTPCTL_AUTOASCONF_DESC "Enable SCTP Auto-ASCONF"
#define SCTPCTL_AUTOASCONF_MIN 0
#define SCTPCTL_AUTOASCONF_MAX 1
#define SCTPCTL_AUTOASCONF_DEFAULT SCTP_DEFAULT_AUTO_ASCONF
/* autoasconf: Enable SCTP Auto-ASCONF */
#define SCTPCTL_MULTIPLEASCONFS_DESC "Enable SCTP Muliple-ASCONFs"
#define SCTPCTL_MULTIPLEASCONFS_MIN 0
#define SCTPCTL_MULTIPLEASCONFS_MAX 1
#define SCTPCTL_MULTIPLEASCONFS_DEFAULT SCTP_DEFAULT_MULTIPLE_ASCONFS
/* ecn_enable: Enable SCTP ECN */
#define SCTPCTL_ECN_ENABLE_DESC "Enable SCTP ECN"
#define SCTPCTL_ECN_ENABLE_MIN 0
#define SCTPCTL_ECN_ENABLE_MAX 1
#define SCTPCTL_ECN_ENABLE_DEFAULT 1
/* strict_sacks: Enable SCTP Strict SACK checking */
#define SCTPCTL_STRICT_SACKS_DESC "Enable SCTP Strict SACK checking"
#define SCTPCTL_STRICT_SACKS_MIN 0
#define SCTPCTL_STRICT_SACKS_MAX 1
#define SCTPCTL_STRICT_SACKS_DEFAULT 1
/* loopback_nocsum: Enable NO Csum on packets sent on loopback */
#define SCTPCTL_LOOPBACK_NOCSUM_DESC "Enable NO Csum on packets sent on loopback"
#define SCTPCTL_LOOPBACK_NOCSUM_MIN 0
#define SCTPCTL_LOOPBACK_NOCSUM_MAX 1
#define SCTPCTL_LOOPBACK_NOCSUM_DEFAULT 1
/* peer_chkoh: Amount to debit peers rwnd per chunk sent */
#define SCTPCTL_PEER_CHKOH_DESC "Amount to debit peers rwnd per chunk sent"
#define SCTPCTL_PEER_CHKOH_MIN 0
#define SCTPCTL_PEER_CHKOH_MAX 0xFFFFFFFF
#define SCTPCTL_PEER_CHKOH_DEFAULT 256
/* maxburst: Default max burst for sctp endpoints */
#define SCTPCTL_MAXBURST_DESC "Default max burst for sctp endpoints"
#define SCTPCTL_MAXBURST_MIN 0
#define SCTPCTL_MAXBURST_MAX 0xFFFFFFFF
#define SCTPCTL_MAXBURST_DEFAULT SCTP_DEF_MAX_BURST
/* fr_maxburst: Default max burst for sctp endpoints when fast retransmitting */
#define SCTPCTL_FRMAXBURST_DESC "Default fr max burst for sctp endpoints"
#define SCTPCTL_FRMAXBURST_MIN 0
#define SCTPCTL_FRMAXBURST_MAX 0xFFFFFFFF
#define SCTPCTL_FRMAXBURST_DEFAULT SCTP_DEF_FRMAX_BURST
/* maxchunks: Default max chunks on queue per asoc */
#define SCTPCTL_MAXCHUNKS_DESC "Default max chunks on queue per asoc"
#define SCTPCTL_MAXCHUNKS_MIN 0
#define SCTPCTL_MAXCHUNKS_MAX 0xFFFFFFFF
#define SCTPCTL_MAXCHUNKS_DEFAULT SCTP_ASOC_MAX_CHUNKS_ON_QUEUE
2011-02-04 12:03:48 +00:00
/* tcbhashsize: Tunable for Hash table sizes */
#define SCTPCTL_TCBHASHSIZE_DESC "Tunable for TCB hash table sizes"
#define SCTPCTL_TCBHASHSIZE_MIN 1
#define SCTPCTL_TCBHASHSIZE_MAX 0xFFFFFFFF
#define SCTPCTL_TCBHASHSIZE_DEFAULT SCTP_TCBHASHSIZE
2011-02-04 12:03:48 +00:00
/* pcbhashsize: Tunable for PCB Hash table sizes */
#define SCTPCTL_PCBHASHSIZE_DESC "Tunable for PCB hash table sizes"
#define SCTPCTL_PCBHASHSIZE_MIN 1
#define SCTPCTL_PCBHASHSIZE_MAX 0xFFFFFFFF
#define SCTPCTL_PCBHASHSIZE_DEFAULT SCTP_PCBHASHSIZE
/* min_split_point: Minimum size when splitting a chunk */
#define SCTPCTL_MIN_SPLIT_POINT_DESC "Minimum size when splitting a chunk"
#define SCTPCTL_MIN_SPLIT_POINT_MIN 0
#define SCTPCTL_MIN_SPLIT_POINT_MAX 0xFFFFFFFF
#define SCTPCTL_MIN_SPLIT_POINT_DEFAULT SCTP_DEFAULT_SPLIT_POINT_MIN
2011-02-04 12:03:48 +00:00
/* chunkscale: Tunable for Scaling of number of chunks and messages */
#define SCTPCTL_CHUNKSCALE_DESC "Tunable for Scaling of number of chunks and messages"
#define SCTPCTL_CHUNKSCALE_MIN 1
#define SCTPCTL_CHUNKSCALE_MAX 0xFFFFFFFF
#define SCTPCTL_CHUNKSCALE_DEFAULT SCTP_CHUNKQUEUE_SCALE
/* delayed_sack_time: Default delayed SACK timer in ms */
#define SCTPCTL_DELAYED_SACK_TIME_DESC "Default delayed SACK timer in ms"
#define SCTPCTL_DELAYED_SACK_TIME_MIN 0
#define SCTPCTL_DELAYED_SACK_TIME_MAX 0xFFFFFFFF
#define SCTPCTL_DELAYED_SACK_TIME_DEFAULT SCTP_RECV_MSEC
/* sack_freq: Default SACK frequency */
#define SCTPCTL_SACK_FREQ_DESC "Default SACK frequency"
#define SCTPCTL_SACK_FREQ_MIN 0
#define SCTPCTL_SACK_FREQ_MAX 0xFFFFFFFF
#define SCTPCTL_SACK_FREQ_DEFAULT SCTP_DEFAULT_SACK_FREQ
/* sys_resource: Max number of cached resources in the system */
#define SCTPCTL_SYS_RESOURCE_DESC "Max number of cached resources in the system"
#define SCTPCTL_SYS_RESOURCE_MIN 0
#define SCTPCTL_SYS_RESOURCE_MAX 0xFFFFFFFF
#define SCTPCTL_SYS_RESOURCE_DEFAULT SCTP_DEF_SYSTEM_RESC_LIMIT
/* asoc_resource: Max number of cached resources in an asoc */
#define SCTPCTL_ASOC_RESOURCE_DESC "Max number of cached resources in an asoc"
#define SCTPCTL_ASOC_RESOURCE_MIN 0
#define SCTPCTL_ASOC_RESOURCE_MAX 0xFFFFFFFF
#define SCTPCTL_ASOC_RESOURCE_DEFAULT SCTP_DEF_ASOC_RESC_LIMIT
/* heartbeat_interval: Default heartbeat interval in ms */
#define SCTPCTL_HEARTBEAT_INTERVAL_DESC "Default heartbeat interval in ms"
#define SCTPCTL_HEARTBEAT_INTERVAL_MIN 0
#define SCTPCTL_HEARTBEAT_INTERVAL_MAX 0xFFFFFFFF
#define SCTPCTL_HEARTBEAT_INTERVAL_DEFAULT SCTP_HB_DEFAULT_MSEC
/* pmtu_raise_time: Default PMTU raise timer in seconds */
#define SCTPCTL_PMTU_RAISE_TIME_DESC "Default PMTU raise timer in seconds"
#define SCTPCTL_PMTU_RAISE_TIME_MIN 0
#define SCTPCTL_PMTU_RAISE_TIME_MAX 0xFFFFFFFF
#define SCTPCTL_PMTU_RAISE_TIME_DEFAULT SCTP_DEF_PMTU_RAISE_SEC
/* shutdown_guard_time: Default shutdown guard timer in seconds */
#define SCTPCTL_SHUTDOWN_GUARD_TIME_DESC "Default shutdown guard timer in seconds"
#define SCTPCTL_SHUTDOWN_GUARD_TIME_MIN 0
#define SCTPCTL_SHUTDOWN_GUARD_TIME_MAX 0xFFFFFFFF
#define SCTPCTL_SHUTDOWN_GUARD_TIME_DEFAULT SCTP_DEF_MAX_SHUTDOWN_SEC
/* secret_lifetime: Default secret lifetime in seconds */
#define SCTPCTL_SECRET_LIFETIME_DESC "Default secret lifetime in seconds"
#define SCTPCTL_SECRET_LIFETIME_MIN 0
#define SCTPCTL_SECRET_LIFETIME_MAX 0xFFFFFFFF
#define SCTPCTL_SECRET_LIFETIME_DEFAULT SCTP_DEFAULT_SECRET_LIFE_SEC
/* rto_max: Default maximum retransmission timeout in ms */
#define SCTPCTL_RTO_MAX_DESC "Default maximum retransmission timeout in ms"
#define SCTPCTL_RTO_MAX_MIN 0
#define SCTPCTL_RTO_MAX_MAX 0xFFFFFFFF
#define SCTPCTL_RTO_MAX_DEFAULT SCTP_RTO_UPPER_BOUND
/* rto_min: Default minimum retransmission timeout in ms */
#define SCTPCTL_RTO_MIN_DESC "Default minimum retransmission timeout in ms"
#define SCTPCTL_RTO_MIN_MIN 0
#define SCTPCTL_RTO_MIN_MAX 0xFFFFFFFF
#define SCTPCTL_RTO_MIN_DEFAULT SCTP_RTO_LOWER_BOUND
/* rto_initial: Default initial retransmission timeout in ms */
#define SCTPCTL_RTO_INITIAL_DESC "Default initial retransmission timeout in ms"
#define SCTPCTL_RTO_INITIAL_MIN 0
#define SCTPCTL_RTO_INITIAL_MAX 0xFFFFFFFF
#define SCTPCTL_RTO_INITIAL_DEFAULT SCTP_RTO_INITIAL
/* init_rto_max: Default maximum retransmission timeout during association setup in ms */
#define SCTPCTL_INIT_RTO_MAX_DESC "Default maximum retransmission timeout during association setup in ms"
#define SCTPCTL_INIT_RTO_MAX_MIN 0
#define SCTPCTL_INIT_RTO_MAX_MAX 0xFFFFFFFF
#define SCTPCTL_INIT_RTO_MAX_DEFAULT SCTP_RTO_UPPER_BOUND
/* valid_cookie_life: Default cookie lifetime in sec */
#define SCTPCTL_VALID_COOKIE_LIFE_DESC "Default cookie lifetime in seconds"
#define SCTPCTL_VALID_COOKIE_LIFE_MIN 0
#define SCTPCTL_VALID_COOKIE_LIFE_MAX 0xFFFFFFFF
#define SCTPCTL_VALID_COOKIE_LIFE_DEFAULT SCTP_DEFAULT_COOKIE_LIFE
/* init_rtx_max: Default maximum number of retransmission for INIT chunks */
#define SCTPCTL_INIT_RTX_MAX_DESC "Default maximum number of retransmission for INIT chunks"
#define SCTPCTL_INIT_RTX_MAX_MIN 0
#define SCTPCTL_INIT_RTX_MAX_MAX 0xFFFFFFFF
#define SCTPCTL_INIT_RTX_MAX_DEFAULT SCTP_DEF_MAX_INIT
/* assoc_rtx_max: Default maximum number of retransmissions per association */
#define SCTPCTL_ASSOC_RTX_MAX_DESC "Default maximum number of retransmissions per association"
#define SCTPCTL_ASSOC_RTX_MAX_MIN 0
#define SCTPCTL_ASSOC_RTX_MAX_MAX 0xFFFFFFFF
#define SCTPCTL_ASSOC_RTX_MAX_DEFAULT SCTP_DEF_MAX_SEND
/* path_rtx_max: Default maximum of retransmissions per path */
#define SCTPCTL_PATH_RTX_MAX_DESC "Default maximum of retransmissions per path"
#define SCTPCTL_PATH_RTX_MAX_MIN 0
#define SCTPCTL_PATH_RTX_MAX_MAX 0xFFFFFFFF
#define SCTPCTL_PATH_RTX_MAX_DEFAULT SCTP_DEF_MAX_PATH_RTX
/* path_pf_threshold: threshold for considering the path potentially failed */
#define SCTPCTL_PATH_PF_THRESHOLD_DESC "Default potentially failed threshold"
#define SCTPCTL_PATH_PF_THRESHOLD_MIN 0
#define SCTPCTL_PATH_PF_THRESHOLD_MAX 0xFFFF
#define SCTPCTL_PATH_PF_THRESHOLD_DEFAULT SCTPCTL_PATH_PF_THRESHOLD_MAX
/* add_more_on_output: When space-wise is it worthwhile to try to add more to a socket send buffer */
#define SCTPCTL_ADD_MORE_ON_OUTPUT_DESC "When space-wise is it worthwhile to try to add more to a socket send buffer"
#define SCTPCTL_ADD_MORE_ON_OUTPUT_MIN 0
#define SCTPCTL_ADD_MORE_ON_OUTPUT_MAX 0xFFFFFFFF
#define SCTPCTL_ADD_MORE_ON_OUTPUT_DEFAULT SCTP_DEFAULT_ADD_MORE
/* outgoing_streams: Default number of outgoing streams */
#define SCTPCTL_OUTGOING_STREAMS_DESC "Default number of outgoing streams"
#define SCTPCTL_OUTGOING_STREAMS_MIN 1
#define SCTPCTL_OUTGOING_STREAMS_MAX 65535
#define SCTPCTL_OUTGOING_STREAMS_DEFAULT SCTP_OSTREAM_INITIAL
/* cmt_on_off: CMT on/off flag */
#define SCTPCTL_CMT_ON_OFF_DESC "CMT settings"
#define SCTPCTL_CMT_ON_OFF_MIN SCTP_CMT_OFF
#define SCTPCTL_CMT_ON_OFF_MAX SCTP_CMT_MAX
#define SCTPCTL_CMT_ON_OFF_DEFAULT SCTP_CMT_OFF
/* EY - nr_sack_on_off: NR_SACK on/off flag */
#define SCTPCTL_NR_SACK_ON_OFF_DESC "NR_SACK on/off flag"
#define SCTPCTL_NR_SACK_ON_OFF_MIN 0
#define SCTPCTL_NR_SACK_ON_OFF_MAX 1
#define SCTPCTL_NR_SACK_ON_OFF_DEFAULT 0
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
/* cmt_use_dac: CMT DAC on/off flag */
#define SCTPCTL_CMT_USE_DAC_DESC "CMT DAC on/off flag"
#define SCTPCTL_CMT_USE_DAC_MIN 0
#define SCTPCTL_CMT_USE_DAC_MAX 1
#define SCTPCTL_CMT_USE_DAC_DEFAULT 0
/* cwnd_maxburst: Use a CWND adjusting maxburst */
#define SCTPCTL_CWND_MAXBURST_DESC "Use a CWND adjusting maxburst"
#define SCTPCTL_CWND_MAXBURST_MIN 0
#define SCTPCTL_CWND_MAXBURST_MAX 1
#define SCTPCTL_CWND_MAXBURST_DEFAULT 1
/* asconf_auth_nochk: Disable SCTP ASCONF AUTH requirement */
#define SCTPCTL_ASCONF_AUTH_NOCHK_DESC "Disable SCTP ASCONF AUTH requirement"
#define SCTPCTL_ASCONF_AUTH_NOCHK_MIN 0
#define SCTPCTL_ASCONF_AUTH_NOCHK_MAX 1
#define SCTPCTL_ASCONF_AUTH_NOCHK_DEFAULT 0
/* auth_disable: Disable SCTP AUTH function */
#define SCTPCTL_AUTH_DISABLE_DESC "Disable SCTP AUTH function"
#define SCTPCTL_AUTH_DISABLE_MIN 0
#define SCTPCTL_AUTH_DISABLE_MAX 1
#define SCTPCTL_AUTH_DISABLE_DEFAULT 0
/* nat_friendly: SCTP NAT friendly operation */
#define SCTPCTL_NAT_FRIENDLY_DESC "SCTP NAT friendly operation"
#define SCTPCTL_NAT_FRIENDLY_MIN 0
#define SCTPCTL_NAT_FRIENDLY_MAX 1
#define SCTPCTL_NAT_FRIENDLY_DEFAULT 1
/* abc_l_var: SCTP ABC max increase per SACK (L) */
#define SCTPCTL_ABC_L_VAR_DESC "SCTP ABC max increase per SACK (L)"
#define SCTPCTL_ABC_L_VAR_MIN 0
#define SCTPCTL_ABC_L_VAR_MAX 0xFFFFFFFF
#define SCTPCTL_ABC_L_VAR_DEFAULT 2
/* max_chained_mbufs: Default max number of small mbufs on a chain */
#define SCTPCTL_MAX_CHAINED_MBUFS_DESC "Default max number of small mbufs on a chain"
#define SCTPCTL_MAX_CHAINED_MBUFS_MIN 0
#define SCTPCTL_MAX_CHAINED_MBUFS_MAX 0xFFFFFFFF
#define SCTPCTL_MAX_CHAINED_MBUFS_DEFAULT SCTP_DEFAULT_MBUFS_IN_CHAIN
/* do_sctp_drain: Should SCTP respond to the drain calls */
#define SCTPCTL_DO_SCTP_DRAIN_DESC "Should SCTP respond to the drain calls"
#define SCTPCTL_DO_SCTP_DRAIN_MIN 0
#define SCTPCTL_DO_SCTP_DRAIN_MAX 1
#define SCTPCTL_DO_SCTP_DRAIN_DEFAULT 1
/* hb_max_burst: Confirmation Heartbeat max burst? */
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
#define SCTPCTL_HB_MAX_BURST_DESC "Confirmation Heartbeat max burst"
#define SCTPCTL_HB_MAX_BURST_MIN 1
#define SCTPCTL_HB_MAX_BURST_MAX 0xFFFFFFFF
#define SCTPCTL_HB_MAX_BURST_DEFAULT SCTP_DEF_HBMAX_BURST
/* abort_at_limit: When one-2-one hits qlimit abort */
#define SCTPCTL_ABORT_AT_LIMIT_DESC "When one-2-one hits qlimit abort"
#define SCTPCTL_ABORT_AT_LIMIT_MIN 0
#define SCTPCTL_ABORT_AT_LIMIT_MAX 1
#define SCTPCTL_ABORT_AT_LIMIT_DEFAULT 0
/* strict_data_order: Enforce strict data ordering, abort if control inside data */
#define SCTPCTL_STRICT_DATA_ORDER_DESC "Enforce strict data ordering, abort if control inside data"
#define SCTPCTL_STRICT_DATA_ORDER_MIN 0
#define SCTPCTL_STRICT_DATA_ORDER_MAX 1
#define SCTPCTL_STRICT_DATA_ORDER_DEFAULT 0
/* min_residual: min residual in a data fragment leftover */
#define SCTPCTL_MIN_RESIDUAL_DESC "Minimum residual data chunk in second part of split"
#define SCTPCTL_MIN_RESIDUAL_MIN 20
#define SCTPCTL_MIN_RESIDUAL_MAX 65535
#define SCTPCTL_MIN_RESIDUAL_DEFAULT 1452
/* max_retran_chunk: max chunk retransmissions */
#define SCTPCTL_MAX_RETRAN_CHUNK_DESC "Maximum times an unlucky chunk can be retran'd before assoc abort"
#define SCTPCTL_MAX_RETRAN_CHUNK_MIN 0
#define SCTPCTL_MAX_RETRAN_CHUNK_MAX 65535
#define SCTPCTL_MAX_RETRAN_CHUNK_DEFAULT 30
/* sctp_logging: This gives us logging when the options are enabled */
#define SCTPCTL_LOGGING_LEVEL_DESC "Ltrace/KTR trace logging level"
#define SCTPCTL_LOGGING_LEVEL_MIN 0
#define SCTPCTL_LOGGING_LEVEL_MAX 0xffffffff
#define SCTPCTL_LOGGING_LEVEL_DEFAULT 0
/* JRS - default congestion control module sysctl */
#define SCTPCTL_DEFAULT_CC_MODULE_DESC "Default congestion control module"
#define SCTPCTL_DEFAULT_CC_MODULE_MIN 0
#define SCTPCTL_DEFAULT_CC_MODULE_MAX 2
#define SCTPCTL_DEFAULT_CC_MODULE_DEFAULT 0
/* RS - default stream scheduling module sysctl */
#define SCTPCTL_DEFAULT_SS_MODULE_DESC "Default stream scheduling module"
#define SCTPCTL_DEFAULT_SS_MODULE_MIN 0
#define SCTPCTL_DEFAULT_SS_MODULE_MAX 5
#define SCTPCTL_DEFAULT_SS_MODULE_DEFAULT 0
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
/* RRS - default fragment interleave */
#define SCTPCTL_DEFAULT_FRAG_INTERLEAVE_DESC "Default fragment interleave level"
#define SCTPCTL_DEFAULT_FRAG_INTERLEAVE_MIN 0
#define SCTPCTL_DEFAULT_FRAG_INTERLEAVE_MAX 2
#define SCTPCTL_DEFAULT_FRAG_INTERLEAVE_DEFAULT 1
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
/* mobility_base: Enable SCTP mobility support */
#define SCTPCTL_MOBILITY_BASE_DESC "Enable SCTP base mobility"
#define SCTPCTL_MOBILITY_BASE_MIN 0
#define SCTPCTL_MOBILITY_BASE_MAX 1
#define SCTPCTL_MOBILITY_BASE_DEFAULT SCTP_DEFAULT_MOBILITY_BASE
/* mobility_fasthandoff: Enable SCTP fast handoff support */
#define SCTPCTL_MOBILITY_FASTHANDOFF_DESC "Enable SCTP fast handoff"
#define SCTPCTL_MOBILITY_FASTHANDOFF_MIN 0
#define SCTPCTL_MOBILITY_FASTHANDOFF_MAX 1
#define SCTPCTL_MOBILITY_FASTHANDOFF_DEFAULT SCTP_DEFAULT_MOBILITY_FASTHANDOFF
/* Enable SCTP/UDP tunneling port */
#define SCTPCTL_UDP_TUNNELING_PORT_DESC "Set the SCTP/UDP tunneling port"
#define SCTPCTL_UDP_TUNNELING_PORT_MIN 0
#define SCTPCTL_UDP_TUNNELING_PORT_MAX 65535
#define SCTPCTL_UDP_TUNNELING_PORT_DEFAULT SCTP_OVER_UDP_TUNNELING_PORT
/* Enable sending of the SACK-IMMEDIATELY bit */
#define SCTPCTL_SACK_IMMEDIATELY_ENABLE_DESC "Enable sending of the SACK-IMMEDIATELY-bit."
#define SCTPCTL_SACK_IMMEDIATELY_ENABLE_MIN 0
#define SCTPCTL_SACK_IMMEDIATELY_ENABLE_MAX 1
#define SCTPCTL_SACK_IMMEDIATELY_ENABLE_DEFAULT SCTPCTL_SACK_IMMEDIATELY_ENABLE_MIN
/* Enable sending of the NAT-FRIENDLY message */
#define SCTPCTL_NAT_FRIENDLY_INITS_DESC "Enable sending of the nat-friendly SCTP option on INITs."
#define SCTPCTL_NAT_FRIENDLY_INITS_MIN 0
#define SCTPCTL_NAT_FRIENDLY_INITS_MAX 1
#define SCTPCTL_NAT_FRIENDLY_INITS_DEFAULT SCTPCTL_NAT_FRIENDLY_INITS_MIN
/* Vtag time wait in seconds */
#define SCTPCTL_TIME_WAIT_DESC "Vtag time wait time in seconds, 0 disables it."
#define SCTPCTL_TIME_WAIT_MIN 0
#define SCTPCTL_TIME_WAIT_MAX 0xffffffff
#define SCTPCTL_TIME_WAIT_DEFAULT SCTP_TIME_WAIT
/* Enable Send/Receive buffer splitting */
#define SCTPCTL_BUFFER_SPLITTING_DESC "Enable send/receive buffer splitting."
#define SCTPCTL_BUFFER_SPLITTING_MIN 0
#define SCTPCTL_BUFFER_SPLITTING_MAX 0x3
#define SCTPCTL_BUFFER_SPLITTING_DEFAULT SCTPCTL_BUFFER_SPLITTING_MIN
/* Initial congestion window in MTU */
#define SCTPCTL_INITIAL_CWND_DESC "Initial congestion window in MTUs"
#define SCTPCTL_INITIAL_CWND_MIN 0
#define SCTPCTL_INITIAL_CWND_MAX 0xffffffff
#define SCTPCTL_INITIAL_CWND_DEFAULT 3
/* rttvar smooth avg for bw calc */
#define SCTPCTL_RTTVAR_BW_DESC "Shift amount for bw smoothing on rtt calc"
#define SCTPCTL_RTTVAR_BW_MIN 0
#define SCTPCTL_RTTVAR_BW_MAX 32
#define SCTPCTL_RTTVAR_BW_DEFAULT 4
/* rttvar smooth avg for bw calc */
#define SCTPCTL_RTTVAR_RTT_DESC "Shift amount for rtt smoothing on rtt calc"
#define SCTPCTL_RTTVAR_RTT_MIN 0
#define SCTPCTL_RTTVAR_RTT_MAX 32
#define SCTPCTL_RTTVAR_RTT_DEFAULT 5
#define SCTPCTL_RTTVAR_EQRET_DESC "What to return when rtt and bw are unchanged"
#define SCTPCTL_RTTVAR_EQRET_MIN 0
#define SCTPCTL_RTTVAR_EQRET_MAX 1
#define SCTPCTL_RTTVAR_EQRET_DEFAULT 0
#define SCTPCTL_RTTVAR_STEADYS_DESC "How many the sames it takes to try step down of cwnd"
#define SCTPCTL_RTTVAR_STEADYS_MIN 0
#define SCTPCTL_RTTVAR_STEADYS_MAX 0xFFFF
#define SCTPCTL_RTTVAR_STEADYS_DEFAULT 20 /* 0 means disable feature */
#define SCTPCTL_RTTVAR_DCCCECN_DESC "Enable for RTCC CC datacenter ECN"
#define SCTPCTL_RTTVAR_DCCCECN_MIN 0
#define SCTPCTL_RTTVAR_DCCCECN_MAX 1
#define SCTPCTL_RTTVAR_DCCCECN_DEFAULT 1 /* 0 means disable feature */
#define SCTPCTL_BLACKHOLE_DESC "Enable SCTP blackholing"
#define SCTPCTL_BLACKHOLE_MIN 0
#define SCTPCTL_BLACKHOLE_MAX 2
#define SCTPCTL_BLACKHOLE_DEFAULT SCTPCTL_BLACKHOLE_MIN
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
#if defined(SCTP_DEBUG)
/* debug: Configure debug output */
#define SCTPCTL_DEBUG_DESC "Configure debug output"
#define SCTPCTL_DEBUG_MIN 0
#define SCTPCTL_DEBUG_MAX 0xFFFFFFFF
#define SCTPCTL_DEBUG_DEFAULT 0
#endif
#if defined (__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
#define SCTPCTL_OUTPUT_UNLOCKED_DESC "Unlock socket when sending packets down to IP."
#define SCTPCTL_OUTPUT_UNLOCKED_MIN 0
#define SCTPCTL_OUTPUT_UNLOCKED_MAX 1
#define SCTPCTL_OUTPUT_UNLOCKED_DEFAULT SCTPCTL_OUTPUT_UNLOCKED_MIN
#endif
#if defined(_KERNEL) || defined(__Userspace__)
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
#if defined(SYSCTL_DECL)
SYSCTL_DECL(_net_inet_sctp);
#endif
void sctp_init_sysctls(void);
#endif /* _KERNEL */
#endif /* __sctp_sysctl_h__ */