d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9f4e66afb9
freebsd-skq/sys/compat/ndis/subr_hal.c

482 lines
15 KiB
C
Raw Normal View History

Start each of the license/copyright comments with /*-
2005-01-05 22:34:37 +00:00
/*-
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
* Copyright (c) 2003
* Bill Paul <wpaul@windriver.com>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/types.h>
#include <sys/errno.h>
#include <sys/callout.h>
#include <sys/kernel.h>
Tweak ndiscvt to support yet another flavor of .INF files (look for the NTx86 section decoration). subr_ndis.c: correct the behavior of ndis_query_resources(): if the caller doesn't provide enough space to return the resources, tell it how much it needs to provide and return an error. subr_hal.c & subr_ntoskrnl.c: implement/stub a bunch of new routines; ntoskrnl: KefAcquireSpinLockAtDpcLevel KefReleaseSpinLockFromDpcLevel MmMapLockedPages InterlockedDecrement InterlockedIncrement IoFreeMdl KeInitializeSpinLock HAL: KfReleaseSpinLock KeGetCurrentIrql KfAcquireSpinLock Lastly, correct spelling of "_aullshr" in the ntoskrnl functable.
2004-01-03 02:25:21 +00:00
#include <sys/lock.h>
#include <sys/mutex.h>
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
#include <sys/proc.h>
#include <sys/sched.h>
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
#include <sys/module.h>
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
#include <sys/systm.h>
#include <machine/bus.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <compat/ndis/pe_var.h>
Throw the switch on the new driver generation/loading mechanism. From here on in, if_ndis.ko will be pre-built as a module, and can be built into a static kernel (though it's not part of GENERIC). Drivers are created using the new ndisgen(8) script, which uses ndiscvt(8) under the covers, along with a few other tools. The result is a driver module that can be kldloaded into the kernel. A driver with foo.inf and foo.sys files will be converted into foo_sys.ko (and foo_sys.o, for those who want/need to make static kernels). This module contains all of the necessary info from the .INF file and the driver binary image, converted into an ELF module. You can kldload this module (or add it to /boot/loader.conf) to have it loaded automatically. Any required firmware files can be bundled into the module as well (or converted/loaded separately). Also, add a workaround for a problem in NdisMSleep(). During system bootstrap (cold == 1), msleep() always returns 0 without actually sleeping. The Intel 2200BG driver uses NdisMSleep() to wait for the NIC's firmware to come to life, and fails to load if NdisMSleep() doesn't actually delay. As a workaround, if msleep() (and hence ndis_thsuspend()) returns 0, use a hard DELAY() to sleep instead). This is not really the right thing to do, but we can't really do much else. At the very least, this makes the Intel driver happy. There are probably other drivers that fail in this way during bootstrap. Unfortunately, the only workaround for those is to avoid pre-loading them and kldload them once the system is running instead.
2005-04-24 20:21:22 +00:00
#include <compat/ndis/resource_var.h>
#include <compat/ndis/cfg_var.h>
Tweak ndiscvt to support yet another flavor of .INF files (look for the NTx86 section decoration). subr_ndis.c: correct the behavior of ndis_query_resources(): if the caller doesn't provide enough space to return the resources, tell it how much it needs to provide and return an error. subr_hal.c & subr_ntoskrnl.c: implement/stub a bunch of new routines; ntoskrnl: KefAcquireSpinLockAtDpcLevel KefReleaseSpinLockFromDpcLevel MmMapLockedPages InterlockedDecrement InterlockedIncrement IoFreeMdl KeInitializeSpinLock HAL: KfReleaseSpinLock KeGetCurrentIrql KfAcquireSpinLock Lastly, correct spelling of "_aullshr" in the ntoskrnl functable.
2004-01-03 02:25:21 +00:00
#include <compat/ndis/ntoskrnl_var.h>
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
#include <compat/ndis/hal_var.h>
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void KeStallExecutionProcessor(uint32_t);
static void WRITE_PORT_BUFFER_ULONG(uint32_t *,
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
uint32_t *, uint32_t);
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void WRITE_PORT_BUFFER_USHORT(uint16_t *,
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
uint16_t *, uint32_t);
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void WRITE_PORT_BUFFER_UCHAR(uint8_t *,
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
uint8_t *, uint32_t);
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void WRITE_PORT_ULONG(uint32_t *, uint32_t);
static void WRITE_PORT_USHORT(uint16_t *, uint16_t);
static void WRITE_PORT_UCHAR(uint8_t *, uint8_t);
static uint32_t READ_PORT_ULONG(uint32_t *);
static uint16_t READ_PORT_USHORT(uint16_t *);
static uint8_t READ_PORT_UCHAR(uint8_t *);
static void READ_PORT_BUFFER_ULONG(uint32_t *,
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
uint32_t *, uint32_t);
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void READ_PORT_BUFFER_USHORT(uint16_t *,
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
uint16_t *, uint32_t);
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void READ_PORT_BUFFER_UCHAR(uint8_t *,
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
uint8_t *, uint32_t);
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static uint64_t KeQueryPerformanceCounter(uint64_t *);
The latest version of the Intel 2200BG/2915ABG driver (9.0.0.3-9) from Intel's web site requires some minor tweaks to get it to work: - The driver seems to have been released with full WMI tracing enabled, and makes references to some WMI APIs, namely IoWMIRegistrationControl(), WmiQueryTraceInformation() and WmiTraceMessage(). Only the first one is ever called (during intialization). These have been implemented as do-nothing stubs for now. Also added a definition for STATUS_NOT_FOUND to ntoskrnl_var.h, which is used as a return code for one of the WMI routines. - The driver references KeRaiseIrqlToDpcLevel() and KeLowerIrql() (the latter as a function, which is unusual because normally KeLowerIrql() is a macro in the Windows DDK that calls KfLowewIrql()). I'm not sure why these are being called since they're not really part of WDM. Presumeably they're being used for backwards compatibility with old versions of Windows. These have been implemented in subr_hal.c. (Note that they're _stdcall routines instead of _fastcall.) - When querying the OID_802_11_BSSID_LIST OID to get a BSSID list, you don't know ahead of time how many networks the NIC has found during scanning, so you're allowed to pass 0 as the list length. This should cause the driver to return an 'insufficient resources' error and set the length to indicate how many bytes are actually needed. However for some reason, the Intel driver does not honor this convention: if you give it a length of 0, it returns some other error and doesn't tell you how much space is really needed. To get around this, if using a length of 0 yields anything besides the expected error case, we arbitrarily assume a length of 64K. This is similar to the hack that wpa_supplicant uses when doing a BSSID list query.
2005-11-06 19:38:34 +00:00
static void _KeLowerIrql(uint8_t);
static uint8_t KeRaiseIrqlToDpcLevel(void);
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void dummy (void);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
This commit makes a big round of updates and fixes many, many things. First and most importantly, I threw out the thread priority-twiddling implementation of KeRaiseIrql()/KeLowerIrq()/KeGetCurrentIrql() in favor of a new scheme that uses sleep mutexes. The old scheme was really very naughty and sought to provide the same behavior as Windows spinlocks (i.e. blocking pre-emption) but in a way that wouldn't raise the ire of WITNESS. The new scheme represents 'DISPATCH_LEVEL' as the acquisition of a per-cpu sleep mutex. If a thread on cpu0 acquires the 'dispatcher mutex,' it will block any other thread on the same processor that tries to acquire it, in effect only allowing one thread on the processor to be at 'DISPATCH_LEVEL' at any given time. It can then do the 'atomic sit and spin' routine on the spinlock variable itself. If a thread on cpu1 wants to acquire the same spinlock, it acquires the 'dispatcher mutex' for cpu1 and then it too does an atomic sit and spin to try acquiring the spinlock. Unlike real spinlocks, this does not disable pre-emption of all threads on the CPU, but it does put any threads involved with the NDISulator to sleep, which is just as good for our purposes. This means I can now play nice with WITNESS, and I can safely do things like call malloc() when I'm at 'DISPATCH_LEVEL,' which you're allowed to do in Windows. Next, I completely re-wrote most of the event/timer/mutex handling and wait code. KeWaitForSingleObject() and KeWaitForMultipleObjects() have been re-written to use condition variables instead of msleep(). This allows us to use the Windows convention whereby thread A can tell thread B "wake up with a boosted priority." (With msleep(), you instead have thread B saying "when I get woken up, I'll use this priority here," and thread A can't tell it to do otherwise.) The new KeWaitForMultipleObjects() has been better tested and better duplicates the semantics of its Windows counterpart. I also overhauled the IoQueueWorkItem() API and underlying code. Like KeInsertQueueDpc(), IoQueueWorkItem() must insure that the same work item isn't put on the queue twice. ExQueueWorkItem(), which in my implementation is built on top of IoQueueWorkItem(), was also modified to perform a similar test. I renamed the doubly-linked list macros to give them the same names as their Windows counterparts and fixed RemoveListTail() and RemoveListHead() so they properly return the removed item. I also corrected the list handling code in ntoskrnl_dpc_thread() and ntoskrnl_workitem_thread(). I realized that the original logic did not correctly handle the case where a DPC callout tries to queue up another DPC. It works correctly now. I implemented IoConnectInterrupt() and IoDisconnectInterrupt() and modified NdisMRegisterInterrupt() and NdisMDisconnectInterrupt() to use them. I also tried to duplicate the interrupt handling scheme used in Windows. The interrupt handling is now internal to ndis.ko, and the ndis_intr() function has been removed from if_ndis.c. (In the USB case, interrupt handling isn't needed in if_ndis.c anyway.) NdisMSleep() has been rewritten to use a KeWaitForSingleObject() and a KeTimer, which is how it works in Windows. (This is mainly to insure that the NDISulator uses the KeTimer API so I can spot any problems with it that may arise.) KeCancelTimer() has been changed so that it only cancels timers, and does not attempt to cancel a DPC if the timer managed to fire and queue one up before KeCancelTimer() was called. The Windows DDK documentation seems to imply that KeCantelTimer() will also call KeRemoveQueueDpc() if necessary, but it really doesn't. The KeTimer implementation has been rewritten to use the callout API directly instead of timeout()/untimeout(). I still cheat a little in that I have to manage my own small callout timer wheel, but the timer code works more smoothly now. I discovered a race condition using timeout()/untimeout() with periodic timers where untimeout() fails to actually cancel a timer. I don't quite understand where the race is, using callout_init()/callout_reset()/callout_stop() directly seems to fix it. I also discovered and fixed a bug in winx32_wrap.S related to translating _stdcall calls. There are a couple of routines (i.e. the 64-bit arithmetic intrinsics in subr_ntoskrnl) that return 64-bit quantities. On the x86 arch, 64-bit values are returned in the %eax and %edx registers. However, it happens that the ctxsw_utow() routine uses %edx as a scratch register, and x86_stdcall_wrap() and x86_stdcall_call() were only preserving %eax before branching to ctxsw_utow(). This means %edx was getting clobbered in some cases. Curiously, the most noticeable effect of this bug is that the driver for the TI AXC110 chipset would constantly drop and reacquire its link for no apparent reason. Both %eax and %edx are preserved on the stack now. The _fastcall and _regparm wrappers already handled everything correctly. I changed if_ndis to use IoAllocateWorkItem() and IoQueueWorkItem() instead of the NdisScheduleWorkItem() API. This is to avoid possible deadlocks with any drivers that use NdisScheduleWorkItem() themselves. The unicode/ansi conversion handling code has been cleaned up. The internal routines have been moved to subr_ntoskrnl and the RtlXXX routines have been exported so that subr_ndis can call them. This removes the incestuous relationship between the two modules regarding this code and fixes the implementation so that it honors the 'maxlen' fields correctly. (Previously it was possible for NdisUnicodeStringToAnsiString() to possibly clobber memory it didn't own, which was causing many mysterious crashes in the Marvell 8335 driver.) The registry handling code (NdisOpen/Close/ReadConfiguration()) has been fixed to allocate memory for all the parameters it hands out to callers and delete whem when NdisCloseConfiguration() is called. (Previously, it would secretly use a single static buffer.) I also substantially updated if_ndis so that the source can now be built on FreeBSD 7, 6 and 5 without any changes. On FreeBSD 5, only WEP support is enabled. On FreeBSD 6 and 7, WPA-PSK support is enabled. The original WPA code has been updated to fit in more cleanly with the net80211 API, and to eleminate the use of magic numbers. The ndis_80211_setstate() routine now sets a default authmode of OPEN and initializes the RTS threshold and fragmentation threshold. The WPA routines were changed so that the authentication mode is always set first, followed by the cipher. Some drivers depend on the operations being performed in this order. I also added passthrough ioctls that allow application code to directly call the MiniportSetInformation()/MiniportQueryInformation() methods via ndis_set_info() and ndis_get_info(). The ndis_linksts() routine also caches the last 4 events signalled by the driver via NdisMIndicateStatus(), and they can be queried by an application via a separate ioctl. This is done to allow wpa_supplicant to directly program the various crypto and key management options in the driver, allowing things like WPA2 support to work. Whew.
2005-10-10 16:46:39 +00:00
#define NDIS_MAXCPUS 64
static struct mtx disp_lock[NDIS_MAXCPUS];
Merge in some changes submitted by Brian Feldman. Among other things, these add support for listing BSSIDs via wicontrol -l. I added code to call OID_802_11_BSSID_LIST_SCAN to allow scanning for any nearby wirelsss nets. Convert from using individual mutexes to a mutex pool, created in subr_ndis.c. This deals with the problem of drivers creating locks in their DriverEntry() routines which might get trashed later. Put some messages under IFF_DEBUG.
2004-01-12 03:49:20 +00:00
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
int
hal_libinit()
{
image_patch_table *patch;
This commit makes a big round of updates and fixes many, many things. First and most importantly, I threw out the thread priority-twiddling implementation of KeRaiseIrql()/KeLowerIrq()/KeGetCurrentIrql() in favor of a new scheme that uses sleep mutexes. The old scheme was really very naughty and sought to provide the same behavior as Windows spinlocks (i.e. blocking pre-emption) but in a way that wouldn't raise the ire of WITNESS. The new scheme represents 'DISPATCH_LEVEL' as the acquisition of a per-cpu sleep mutex. If a thread on cpu0 acquires the 'dispatcher mutex,' it will block any other thread on the same processor that tries to acquire it, in effect only allowing one thread on the processor to be at 'DISPATCH_LEVEL' at any given time. It can then do the 'atomic sit and spin' routine on the spinlock variable itself. If a thread on cpu1 wants to acquire the same spinlock, it acquires the 'dispatcher mutex' for cpu1 and then it too does an atomic sit and spin to try acquiring the spinlock. Unlike real spinlocks, this does not disable pre-emption of all threads on the CPU, but it does put any threads involved with the NDISulator to sleep, which is just as good for our purposes. This means I can now play nice with WITNESS, and I can safely do things like call malloc() when I'm at 'DISPATCH_LEVEL,' which you're allowed to do in Windows. Next, I completely re-wrote most of the event/timer/mutex handling and wait code. KeWaitForSingleObject() and KeWaitForMultipleObjects() have been re-written to use condition variables instead of msleep(). This allows us to use the Windows convention whereby thread A can tell thread B "wake up with a boosted priority." (With msleep(), you instead have thread B saying "when I get woken up, I'll use this priority here," and thread A can't tell it to do otherwise.) The new KeWaitForMultipleObjects() has been better tested and better duplicates the semantics of its Windows counterpart. I also overhauled the IoQueueWorkItem() API and underlying code. Like KeInsertQueueDpc(), IoQueueWorkItem() must insure that the same work item isn't put on the queue twice. ExQueueWorkItem(), which in my implementation is built on top of IoQueueWorkItem(), was also modified to perform a similar test. I renamed the doubly-linked list macros to give them the same names as their Windows counterparts and fixed RemoveListTail() and RemoveListHead() so they properly return the removed item. I also corrected the list handling code in ntoskrnl_dpc_thread() and ntoskrnl_workitem_thread(). I realized that the original logic did not correctly handle the case where a DPC callout tries to queue up another DPC. It works correctly now. I implemented IoConnectInterrupt() and IoDisconnectInterrupt() and modified NdisMRegisterInterrupt() and NdisMDisconnectInterrupt() to use them. I also tried to duplicate the interrupt handling scheme used in Windows. The interrupt handling is now internal to ndis.ko, and the ndis_intr() function has been removed from if_ndis.c. (In the USB case, interrupt handling isn't needed in if_ndis.c anyway.) NdisMSleep() has been rewritten to use a KeWaitForSingleObject() and a KeTimer, which is how it works in Windows. (This is mainly to insure that the NDISulator uses the KeTimer API so I can spot any problems with it that may arise.) KeCancelTimer() has been changed so that it only cancels timers, and does not attempt to cancel a DPC if the timer managed to fire and queue one up before KeCancelTimer() was called. The Windows DDK documentation seems to imply that KeCantelTimer() will also call KeRemoveQueueDpc() if necessary, but it really doesn't. The KeTimer implementation has been rewritten to use the callout API directly instead of timeout()/untimeout(). I still cheat a little in that I have to manage my own small callout timer wheel, but the timer code works more smoothly now. I discovered a race condition using timeout()/untimeout() with periodic timers where untimeout() fails to actually cancel a timer. I don't quite understand where the race is, using callout_init()/callout_reset()/callout_stop() directly seems to fix it. I also discovered and fixed a bug in winx32_wrap.S related to translating _stdcall calls. There are a couple of routines (i.e. the 64-bit arithmetic intrinsics in subr_ntoskrnl) that return 64-bit quantities. On the x86 arch, 64-bit values are returned in the %eax and %edx registers. However, it happens that the ctxsw_utow() routine uses %edx as a scratch register, and x86_stdcall_wrap() and x86_stdcall_call() were only preserving %eax before branching to ctxsw_utow(). This means %edx was getting clobbered in some cases. Curiously, the most noticeable effect of this bug is that the driver for the TI AXC110 chipset would constantly drop and reacquire its link for no apparent reason. Both %eax and %edx are preserved on the stack now. The _fastcall and _regparm wrappers already handled everything correctly. I changed if_ndis to use IoAllocateWorkItem() and IoQueueWorkItem() instead of the NdisScheduleWorkItem() API. This is to avoid possible deadlocks with any drivers that use NdisScheduleWorkItem() themselves. The unicode/ansi conversion handling code has been cleaned up. The internal routines have been moved to subr_ntoskrnl and the RtlXXX routines have been exported so that subr_ndis can call them. This removes the incestuous relationship between the two modules regarding this code and fixes the implementation so that it honors the 'maxlen' fields correctly. (Previously it was possible for NdisUnicodeStringToAnsiString() to possibly clobber memory it didn't own, which was causing many mysterious crashes in the Marvell 8335 driver.) The registry handling code (NdisOpen/Close/ReadConfiguration()) has been fixed to allocate memory for all the parameters it hands out to callers and delete whem when NdisCloseConfiguration() is called. (Previously, it would secretly use a single static buffer.) I also substantially updated if_ndis so that the source can now be built on FreeBSD 7, 6 and 5 without any changes. On FreeBSD 5, only WEP support is enabled. On FreeBSD 6 and 7, WPA-PSK support is enabled. The original WPA code has been updated to fit in more cleanly with the net80211 API, and to eleminate the use of magic numbers. The ndis_80211_setstate() routine now sets a default authmode of OPEN and initializes the RTS threshold and fragmentation threshold. The WPA routines were changed so that the authentication mode is always set first, followed by the cipher. Some drivers depend on the operations being performed in this order. I also added passthrough ioctls that allow application code to directly call the MiniportSetInformation()/MiniportQueryInformation() methods via ndis_set_info() and ndis_get_info(). The ndis_linksts() routine also caches the last 4 events signalled by the driver via NdisMIndicateStatus(), and they can be queried by an application via a separate ioctl. This is done to allow wpa_supplicant to directly program the various crypto and key management options in the driver, allowing things like WPA2 support to work. Whew.
2005-10-10 16:46:39 +00:00
int i;
for (i = 0; i < NDIS_MAXCPUS; i++)
mtx_init(&disp_lock[i], "HAL preemption lock",
"HAL lock", MTX_RECURSE|MTX_DEF);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
patch = hal_functbl;
while (patch->ipt_func != NULL) {
windrv_wrap((funcptr)patch->ipt_func,
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
(funcptr *)&patch->ipt_wrap,
patch->ipt_argcnt, patch->ipt_ftype);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
patch++;
}
Big style cleanup. While there remove references to FreeBSD versions older than 6.0. Submitted by: Paul B Mahol <onemda at gmail.com>
2009-11-02 11:07:42 +00:00
return (0);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
}
int
hal_libfini()
{
image_patch_table *patch;
This commit makes a big round of updates and fixes many, many things. First and most importantly, I threw out the thread priority-twiddling implementation of KeRaiseIrql()/KeLowerIrq()/KeGetCurrentIrql() in favor of a new scheme that uses sleep mutexes. The old scheme was really very naughty and sought to provide the same behavior as Windows spinlocks (i.e. blocking pre-emption) but in a way that wouldn't raise the ire of WITNESS. The new scheme represents 'DISPATCH_LEVEL' as the acquisition of a per-cpu sleep mutex. If a thread on cpu0 acquires the 'dispatcher mutex,' it will block any other thread on the same processor that tries to acquire it, in effect only allowing one thread on the processor to be at 'DISPATCH_LEVEL' at any given time. It can then do the 'atomic sit and spin' routine on the spinlock variable itself. If a thread on cpu1 wants to acquire the same spinlock, it acquires the 'dispatcher mutex' for cpu1 and then it too does an atomic sit and spin to try acquiring the spinlock. Unlike real spinlocks, this does not disable pre-emption of all threads on the CPU, but it does put any threads involved with the NDISulator to sleep, which is just as good for our purposes. This means I can now play nice with WITNESS, and I can safely do things like call malloc() when I'm at 'DISPATCH_LEVEL,' which you're allowed to do in Windows. Next, I completely re-wrote most of the event/timer/mutex handling and wait code. KeWaitForSingleObject() and KeWaitForMultipleObjects() have been re-written to use condition variables instead of msleep(). This allows us to use the Windows convention whereby thread A can tell thread B "wake up with a boosted priority." (With msleep(), you instead have thread B saying "when I get woken up, I'll use this priority here," and thread A can't tell it to do otherwise.) The new KeWaitForMultipleObjects() has been better tested and better duplicates the semantics of its Windows counterpart. I also overhauled the IoQueueWorkItem() API and underlying code. Like KeInsertQueueDpc(), IoQueueWorkItem() must insure that the same work item isn't put on the queue twice. ExQueueWorkItem(), which in my implementation is built on top of IoQueueWorkItem(), was also modified to perform a similar test. I renamed the doubly-linked list macros to give them the same names as their Windows counterparts and fixed RemoveListTail() and RemoveListHead() so they properly return the removed item. I also corrected the list handling code in ntoskrnl_dpc_thread() and ntoskrnl_workitem_thread(). I realized that the original logic did not correctly handle the case where a DPC callout tries to queue up another DPC. It works correctly now. I implemented IoConnectInterrupt() and IoDisconnectInterrupt() and modified NdisMRegisterInterrupt() and NdisMDisconnectInterrupt() to use them. I also tried to duplicate the interrupt handling scheme used in Windows. The interrupt handling is now internal to ndis.ko, and the ndis_intr() function has been removed from if_ndis.c. (In the USB case, interrupt handling isn't needed in if_ndis.c anyway.) NdisMSleep() has been rewritten to use a KeWaitForSingleObject() and a KeTimer, which is how it works in Windows. (This is mainly to insure that the NDISulator uses the KeTimer API so I can spot any problems with it that may arise.) KeCancelTimer() has been changed so that it only cancels timers, and does not attempt to cancel a DPC if the timer managed to fire and queue one up before KeCancelTimer() was called. The Windows DDK documentation seems to imply that KeCantelTimer() will also call KeRemoveQueueDpc() if necessary, but it really doesn't. The KeTimer implementation has been rewritten to use the callout API directly instead of timeout()/untimeout(). I still cheat a little in that I have to manage my own small callout timer wheel, but the timer code works more smoothly now. I discovered a race condition using timeout()/untimeout() with periodic timers where untimeout() fails to actually cancel a timer. I don't quite understand where the race is, using callout_init()/callout_reset()/callout_stop() directly seems to fix it. I also discovered and fixed a bug in winx32_wrap.S related to translating _stdcall calls. There are a couple of routines (i.e. the 64-bit arithmetic intrinsics in subr_ntoskrnl) that return 64-bit quantities. On the x86 arch, 64-bit values are returned in the %eax and %edx registers. However, it happens that the ctxsw_utow() routine uses %edx as a scratch register, and x86_stdcall_wrap() and x86_stdcall_call() were only preserving %eax before branching to ctxsw_utow(). This means %edx was getting clobbered in some cases. Curiously, the most noticeable effect of this bug is that the driver for the TI AXC110 chipset would constantly drop and reacquire its link for no apparent reason. Both %eax and %edx are preserved on the stack now. The _fastcall and _regparm wrappers already handled everything correctly. I changed if_ndis to use IoAllocateWorkItem() and IoQueueWorkItem() instead of the NdisScheduleWorkItem() API. This is to avoid possible deadlocks with any drivers that use NdisScheduleWorkItem() themselves. The unicode/ansi conversion handling code has been cleaned up. The internal routines have been moved to subr_ntoskrnl and the RtlXXX routines have been exported so that subr_ndis can call them. This removes the incestuous relationship between the two modules regarding this code and fixes the implementation so that it honors the 'maxlen' fields correctly. (Previously it was possible for NdisUnicodeStringToAnsiString() to possibly clobber memory it didn't own, which was causing many mysterious crashes in the Marvell 8335 driver.) The registry handling code (NdisOpen/Close/ReadConfiguration()) has been fixed to allocate memory for all the parameters it hands out to callers and delete whem when NdisCloseConfiguration() is called. (Previously, it would secretly use a single static buffer.) I also substantially updated if_ndis so that the source can now be built on FreeBSD 7, 6 and 5 without any changes. On FreeBSD 5, only WEP support is enabled. On FreeBSD 6 and 7, WPA-PSK support is enabled. The original WPA code has been updated to fit in more cleanly with the net80211 API, and to eleminate the use of magic numbers. The ndis_80211_setstate() routine now sets a default authmode of OPEN and initializes the RTS threshold and fragmentation threshold. The WPA routines were changed so that the authentication mode is always set first, followed by the cipher. Some drivers depend on the operations being performed in this order. I also added passthrough ioctls that allow application code to directly call the MiniportSetInformation()/MiniportQueryInformation() methods via ndis_set_info() and ndis_get_info(). The ndis_linksts() routine also caches the last 4 events signalled by the driver via NdisMIndicateStatus(), and they can be queried by an application via a separate ioctl. This is done to allow wpa_supplicant to directly program the various crypto and key management options in the driver, allowing things like WPA2 support to work. Whew.
2005-10-10 16:46:39 +00:00
int i;
for (i = 0; i < NDIS_MAXCPUS; i++)
mtx_destroy(&disp_lock[i]);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
patch = hal_functbl;
while (patch->ipt_func != NULL) {
windrv_unwrap(patch->ipt_wrap);
patch++;
}
Big style cleanup. While there remove references to FreeBSD versions older than 6.0. Submitted by: Paul B Mahol <onemda at gmail.com>
2009-11-02 11:07:42 +00:00
return (0);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void
Begin the first phase of trying to add IRP support (and ultimately USB device support): - Convert all of my locally chosen function names to their actual Windows equivalents, where applicable. This is a big no-op change since it doesn't affect functionality, but it helps avoid a bit of confusion (it's now a lot easier to see which functions are emulated Windows API routines and which are just locally defined). - Turn ndis_buffer into an mdl, like it should have been. The structure is the same, but now it belongs to the subr_ntoskrnl module. - Implement a bunch of MDL handling macros from Windows and use them where applicable. - Correct the implementation of IoFreeMdl(). - Properly implement IoAllocateMdl() and MmBuildMdlForNonPagedPool(). - Add the definitions for struct irp and struct driver_object. - Add IMPORT_FUNC() and IMPORT_FUNC_MAP() macros to make formatting the module function tables a little cleaner. (Should also help with AMD64 support later on.) - Fix if_ndis.c to use KeRaiseIrql() and KeLowerIrql() instead of the previous calls to hal_raise_irql() and hal_lower_irql() which have been renamed. The function renaming generated a lot of churn here, but there should be very little operational effect.
2005-01-24 18:18:12 +00:00
KeStallExecutionProcessor(usecs)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
uint32_t usecs;
{
DELAY(usecs);
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void
Begin the first phase of trying to add IRP support (and ultimately USB device support): - Convert all of my locally chosen function names to their actual Windows equivalents, where applicable. This is a big no-op change since it doesn't affect functionality, but it helps avoid a bit of confusion (it's now a lot easier to see which functions are emulated Windows API routines and which are just locally defined). - Turn ndis_buffer into an mdl, like it should have been. The structure is the same, but now it belongs to the subr_ntoskrnl module. - Implement a bunch of MDL handling macros from Windows and use them where applicable. - Correct the implementation of IoFreeMdl(). - Properly implement IoAllocateMdl() and MmBuildMdlForNonPagedPool(). - Add the definitions for struct irp and struct driver_object. - Add IMPORT_FUNC() and IMPORT_FUNC_MAP() macros to make formatting the module function tables a little cleaner. (Should also help with AMD64 support later on.) - Fix if_ndis.c to use KeRaiseIrql() and KeLowerIrql() instead of the previous calls to hal_raise_irql() and hal_lower_irql() which have been renamed. The function renaming generated a lot of churn here, but there should be very little operational effect.
2005-01-24 18:18:12 +00:00
WRITE_PORT_ULONG(port, val)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
uint32_t *port;
uint32_t val;
{
Create NDIS_BUS_SPACE_{IO,MEM} to abstract MD BUS_SPACE macros. Provide appropriate definitions for i386 and AMD64.
2004-01-15 19:34:56 +00:00
bus_space_write_4(NDIS_BUS_SPACE_IO, 0x0, (bus_size_t)port, val);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void
Change the functions to ANSI in those cases where it breaks promotion to int rule. See ISO C Standard: SS6.7.5.3:15. Approved by: kib (mentor) Reviewed by: warner Tested by: silence on -current
2009-02-24 18:09:31 +00:00
WRITE_PORT_USHORT(uint16_t *port, uint16_t val)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
{
Create NDIS_BUS_SPACE_{IO,MEM} to abstract MD BUS_SPACE macros. Provide appropriate definitions for i386 and AMD64.
2004-01-15 19:34:56 +00:00
bus_space_write_2(NDIS_BUS_SPACE_IO, 0x0, (bus_size_t)port, val);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void
Change the functions to ANSI in those cases where it breaks promotion to int rule. See ISO C Standard: SS6.7.5.3:15. Approved by: kib (mentor) Reviewed by: warner Tested by: silence on -current
2009-02-24 18:09:31 +00:00
WRITE_PORT_UCHAR(uint8_t *port, uint8_t val)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
{
Create NDIS_BUS_SPACE_{IO,MEM} to abstract MD BUS_SPACE macros. Provide appropriate definitions for i386 and AMD64.
2004-01-15 19:34:56 +00:00
bus_space_write_1(NDIS_BUS_SPACE_IO, 0x0, (bus_size_t)port, val);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void
Begin the first phase of trying to add IRP support (and ultimately USB device support): - Convert all of my locally chosen function names to their actual Windows equivalents, where applicable. This is a big no-op change since it doesn't affect functionality, but it helps avoid a bit of confusion (it's now a lot easier to see which functions are emulated Windows API routines and which are just locally defined). - Turn ndis_buffer into an mdl, like it should have been. The structure is the same, but now it belongs to the subr_ntoskrnl module. - Implement a bunch of MDL handling macros from Windows and use them where applicable. - Correct the implementation of IoFreeMdl(). - Properly implement IoAllocateMdl() and MmBuildMdlForNonPagedPool(). - Add the definitions for struct irp and struct driver_object. - Add IMPORT_FUNC() and IMPORT_FUNC_MAP() macros to make formatting the module function tables a little cleaner. (Should also help with AMD64 support later on.) - Fix if_ndis.c to use KeRaiseIrql() and KeLowerIrql() instead of the previous calls to hal_raise_irql() and hal_lower_irql() which have been renamed. The function renaming generated a lot of churn here, but there should be very little operational effect.
2005-01-24 18:18:12 +00:00
WRITE_PORT_BUFFER_ULONG(port, val, cnt)
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
uint32_t *port;
uint32_t *val;
uint32_t cnt;
{
Create NDIS_BUS_SPACE_{IO,MEM} to abstract MD BUS_SPACE macros. Provide appropriate definitions for i386 and AMD64.
2004-01-15 19:34:56 +00:00
bus_space_write_multi_4(NDIS_BUS_SPACE_IO, 0x0,
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
(bus_size_t)port, val, cnt);
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void
Begin the first phase of trying to add IRP support (and ultimately USB device support): - Convert all of my locally chosen function names to their actual Windows equivalents, where applicable. This is a big no-op change since it doesn't affect functionality, but it helps avoid a bit of confusion (it's now a lot easier to see which functions are emulated Windows API routines and which are just locally defined). - Turn ndis_buffer into an mdl, like it should have been. The structure is the same, but now it belongs to the subr_ntoskrnl module. - Implement a bunch of MDL handling macros from Windows and use them where applicable. - Correct the implementation of IoFreeMdl(). - Properly implement IoAllocateMdl() and MmBuildMdlForNonPagedPool(). - Add the definitions for struct irp and struct driver_object. - Add IMPORT_FUNC() and IMPORT_FUNC_MAP() macros to make formatting the module function tables a little cleaner. (Should also help with AMD64 support later on.) - Fix if_ndis.c to use KeRaiseIrql() and KeLowerIrql() instead of the previous calls to hal_raise_irql() and hal_lower_irql() which have been renamed. The function renaming generated a lot of churn here, but there should be very little operational effect.
2005-01-24 18:18:12 +00:00
WRITE_PORT_BUFFER_USHORT(port, val, cnt)
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
uint16_t *port;
uint16_t *val;
uint32_t cnt;
{
Create NDIS_BUS_SPACE_{IO,MEM} to abstract MD BUS_SPACE macros. Provide appropriate definitions for i386 and AMD64.
2004-01-15 19:34:56 +00:00
bus_space_write_multi_2(NDIS_BUS_SPACE_IO, 0x0,
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
(bus_size_t)port, val, cnt);
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void
Begin the first phase of trying to add IRP support (and ultimately USB device support): - Convert all of my locally chosen function names to their actual Windows equivalents, where applicable. This is a big no-op change since it doesn't affect functionality, but it helps avoid a bit of confusion (it's now a lot easier to see which functions are emulated Windows API routines and which are just locally defined). - Turn ndis_buffer into an mdl, like it should have been. The structure is the same, but now it belongs to the subr_ntoskrnl module. - Implement a bunch of MDL handling macros from Windows and use them where applicable. - Correct the implementation of IoFreeMdl(). - Properly implement IoAllocateMdl() and MmBuildMdlForNonPagedPool(). - Add the definitions for struct irp and struct driver_object. - Add IMPORT_FUNC() and IMPORT_FUNC_MAP() macros to make formatting the module function tables a little cleaner. (Should also help with AMD64 support later on.) - Fix if_ndis.c to use KeRaiseIrql() and KeLowerIrql() instead of the previous calls to hal_raise_irql() and hal_lower_irql() which have been renamed. The function renaming generated a lot of churn here, but there should be very little operational effect.
2005-01-24 18:18:12 +00:00
WRITE_PORT_BUFFER_UCHAR(port, val, cnt)
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
uint8_t *port;
uint8_t *val;
uint32_t cnt;
{
Create NDIS_BUS_SPACE_{IO,MEM} to abstract MD BUS_SPACE macros. Provide appropriate definitions for i386 and AMD64.
2004-01-15 19:34:56 +00:00
bus_space_write_multi_1(NDIS_BUS_SPACE_IO, 0x0,
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
(bus_size_t)port, val, cnt);
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static uint16_t
Begin the first phase of trying to add IRP support (and ultimately USB device support): - Convert all of my locally chosen function names to their actual Windows equivalents, where applicable. This is a big no-op change since it doesn't affect functionality, but it helps avoid a bit of confusion (it's now a lot easier to see which functions are emulated Windows API routines and which are just locally defined). - Turn ndis_buffer into an mdl, like it should have been. The structure is the same, but now it belongs to the subr_ntoskrnl module. - Implement a bunch of MDL handling macros from Windows and use them where applicable. - Correct the implementation of IoFreeMdl(). - Properly implement IoAllocateMdl() and MmBuildMdlForNonPagedPool(). - Add the definitions for struct irp and struct driver_object. - Add IMPORT_FUNC() and IMPORT_FUNC_MAP() macros to make formatting the module function tables a little cleaner. (Should also help with AMD64 support later on.) - Fix if_ndis.c to use KeRaiseIrql() and KeLowerIrql() instead of the previous calls to hal_raise_irql() and hal_lower_irql() which have been renamed. The function renaming generated a lot of churn here, but there should be very little operational effect.
2005-01-24 18:18:12 +00:00
READ_PORT_USHORT(port)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
uint16_t *port;
{
Big style cleanup. While there remove references to FreeBSD versions older than 6.0. Submitted by: Paul B Mahol <onemda at gmail.com>
2009-11-02 11:07:42 +00:00
return (bus_space_read_2(NDIS_BUS_SPACE_IO, 0x0, (bus_size_t)port));
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static uint32_t
Begin the first phase of trying to add IRP support (and ultimately USB device support): - Convert all of my locally chosen function names to their actual Windows equivalents, where applicable. This is a big no-op change since it doesn't affect functionality, but it helps avoid a bit of confusion (it's now a lot easier to see which functions are emulated Windows API routines and which are just locally defined). - Turn ndis_buffer into an mdl, like it should have been. The structure is the same, but now it belongs to the subr_ntoskrnl module. - Implement a bunch of MDL handling macros from Windows and use them where applicable. - Correct the implementation of IoFreeMdl(). - Properly implement IoAllocateMdl() and MmBuildMdlForNonPagedPool(). - Add the definitions for struct irp and struct driver_object. - Add IMPORT_FUNC() and IMPORT_FUNC_MAP() macros to make formatting the module function tables a little cleaner. (Should also help with AMD64 support later on.) - Fix if_ndis.c to use KeRaiseIrql() and KeLowerIrql() instead of the previous calls to hal_raise_irql() and hal_lower_irql() which have been renamed. The function renaming generated a lot of churn here, but there should be very little operational effect.
2005-01-24 18:18:12 +00:00
READ_PORT_ULONG(port)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
uint32_t *port;
{
Big style cleanup. While there remove references to FreeBSD versions older than 6.0. Submitted by: Paul B Mahol <onemda at gmail.com>
2009-11-02 11:07:42 +00:00
return (bus_space_read_4(NDIS_BUS_SPACE_IO, 0x0, (bus_size_t)port));
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static uint8_t
Begin the first phase of trying to add IRP support (and ultimately USB device support): - Convert all of my locally chosen function names to their actual Windows equivalents, where applicable. This is a big no-op change since it doesn't affect functionality, but it helps avoid a bit of confusion (it's now a lot easier to see which functions are emulated Windows API routines and which are just locally defined). - Turn ndis_buffer into an mdl, like it should have been. The structure is the same, but now it belongs to the subr_ntoskrnl module. - Implement a bunch of MDL handling macros from Windows and use them where applicable. - Correct the implementation of IoFreeMdl(). - Properly implement IoAllocateMdl() and MmBuildMdlForNonPagedPool(). - Add the definitions for struct irp and struct driver_object. - Add IMPORT_FUNC() and IMPORT_FUNC_MAP() macros to make formatting the module function tables a little cleaner. (Should also help with AMD64 support later on.) - Fix if_ndis.c to use KeRaiseIrql() and KeLowerIrql() instead of the previous calls to hal_raise_irql() and hal_lower_irql() which have been renamed. The function renaming generated a lot of churn here, but there should be very little operational effect.
2005-01-24 18:18:12 +00:00
READ_PORT_UCHAR(port)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
uint8_t *port;
{
Big style cleanup. While there remove references to FreeBSD versions older than 6.0. Submitted by: Paul B Mahol <onemda at gmail.com>
2009-11-02 11:07:42 +00:00
return (bus_space_read_1(NDIS_BUS_SPACE_IO, 0x0, (bus_size_t)port));
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void
Begin the first phase of trying to add IRP support (and ultimately USB device support): - Convert all of my locally chosen function names to their actual Windows equivalents, where applicable. This is a big no-op change since it doesn't affect functionality, but it helps avoid a bit of confusion (it's now a lot easier to see which functions are emulated Windows API routines and which are just locally defined). - Turn ndis_buffer into an mdl, like it should have been. The structure is the same, but now it belongs to the subr_ntoskrnl module. - Implement a bunch of MDL handling macros from Windows and use them where applicable. - Correct the implementation of IoFreeMdl(). - Properly implement IoAllocateMdl() and MmBuildMdlForNonPagedPool(). - Add the definitions for struct irp and struct driver_object. - Add IMPORT_FUNC() and IMPORT_FUNC_MAP() macros to make formatting the module function tables a little cleaner. (Should also help with AMD64 support later on.) - Fix if_ndis.c to use KeRaiseIrql() and KeLowerIrql() instead of the previous calls to hal_raise_irql() and hal_lower_irql() which have been renamed. The function renaming generated a lot of churn here, but there should be very little operational effect.
2005-01-24 18:18:12 +00:00
READ_PORT_BUFFER_ULONG(port, val, cnt)
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
uint32_t *port;
uint32_t *val;
uint32_t cnt;
{
Create NDIS_BUS_SPACE_{IO,MEM} to abstract MD BUS_SPACE macros. Provide appropriate definitions for i386 and AMD64.
2004-01-15 19:34:56 +00:00
bus_space_read_multi_4(NDIS_BUS_SPACE_IO, 0x0,
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
(bus_size_t)port, val, cnt);
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void
Begin the first phase of trying to add IRP support (and ultimately USB device support): - Convert all of my locally chosen function names to their actual Windows equivalents, where applicable. This is a big no-op change since it doesn't affect functionality, but it helps avoid a bit of confusion (it's now a lot easier to see which functions are emulated Windows API routines and which are just locally defined). - Turn ndis_buffer into an mdl, like it should have been. The structure is the same, but now it belongs to the subr_ntoskrnl module. - Implement a bunch of MDL handling macros from Windows and use them where applicable. - Correct the implementation of IoFreeMdl(). - Properly implement IoAllocateMdl() and MmBuildMdlForNonPagedPool(). - Add the definitions for struct irp and struct driver_object. - Add IMPORT_FUNC() and IMPORT_FUNC_MAP() macros to make formatting the module function tables a little cleaner. (Should also help with AMD64 support later on.) - Fix if_ndis.c to use KeRaiseIrql() and KeLowerIrql() instead of the previous calls to hal_raise_irql() and hal_lower_irql() which have been renamed. The function renaming generated a lot of churn here, but there should be very little operational effect.
2005-01-24 18:18:12 +00:00
READ_PORT_BUFFER_USHORT(port, val, cnt)
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
uint16_t *port;
uint16_t *val;
uint32_t cnt;
{
Create NDIS_BUS_SPACE_{IO,MEM} to abstract MD BUS_SPACE macros. Provide appropriate definitions for i386 and AMD64.
2004-01-15 19:34:56 +00:00
bus_space_read_multi_2(NDIS_BUS_SPACE_IO, 0x0,
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
(bus_size_t)port, val, cnt);
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static void
Begin the first phase of trying to add IRP support (and ultimately USB device support): - Convert all of my locally chosen function names to their actual Windows equivalents, where applicable. This is a big no-op change since it doesn't affect functionality, but it helps avoid a bit of confusion (it's now a lot easier to see which functions are emulated Windows API routines and which are just locally defined). - Turn ndis_buffer into an mdl, like it should have been. The structure is the same, but now it belongs to the subr_ntoskrnl module. - Implement a bunch of MDL handling macros from Windows and use them where applicable. - Correct the implementation of IoFreeMdl(). - Properly implement IoAllocateMdl() and MmBuildMdlForNonPagedPool(). - Add the definitions for struct irp and struct driver_object. - Add IMPORT_FUNC() and IMPORT_FUNC_MAP() macros to make formatting the module function tables a little cleaner. (Should also help with AMD64 support later on.) - Fix if_ndis.c to use KeRaiseIrql() and KeLowerIrql() instead of the previous calls to hal_raise_irql() and hal_lower_irql() which have been renamed. The function renaming generated a lot of churn here, but there should be very little operational effect.
2005-01-24 18:18:12 +00:00
READ_PORT_BUFFER_UCHAR(port, val, cnt)
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
uint8_t *port;
uint8_t *val;
uint32_t cnt;
{
Create NDIS_BUS_SPACE_{IO,MEM} to abstract MD BUS_SPACE macros. Provide appropriate definitions for i386 and AMD64.
2004-01-15 19:34:56 +00:00
bus_space_read_multi_1(NDIS_BUS_SPACE_IO, 0x0,
subr_hal.c: implement WRITE_PORT_BUFFER_xxx() and READ_PORT_BUFFER_xxx() subr_ndis.c: implement NdisDprAllocatePacket() and NdisDprFreePacket() (which are aliased to NdisAllocatePacket() and NdisFreePacket()), and bump the value we return in ndis_mapreg_cnt() to something ridiculously large, since some drivers apparently expect to be able to allocate way more than just 64. These changes allow the Level 1 1000baseSX driver to work for the following card: ndis0: <SMC TigerCard 1000 Adapter> port 0xe000-0xe0ff mem 0xda004000-0xda0043ff irq 10 at device 9.0 on pci0 ndis0: Ethernet address: 00:e0:29:6f:cc:04 This is already supported by the lge(4) driver, but I decided to take a try at making the Windows driver that came with it work too, since I still had the floppy diskette for it lying around.
2004-01-03 09:20:48 +00:00
(bus_size_t)port, val, cnt);
}
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
/*
* The spinlock implementation in Windows differs from that of FreeBSD.
* The basic operation of spinlocks involves two steps: 1) spin in a
* tight loop while trying to acquire a lock, 2) after obtaining the
* lock, disable preemption. (Note that on uniprocessor systems, you're
* allowed to skip the first step and just lock out pre-emption, since
* it's not possible for you to be in contention with another running
* thread.) Later, you release the lock then re-enable preemption.
* The difference between Windows and FreeBSD lies in how preemption
* is disabled. In FreeBSD, it's done using critical_enter(), which on
* the x86 arch translates to a cli instruction. This masks off all
* interrupts, and effectively stops the scheduler from ever running
* so _nothing_ can execute except the current thread. In Windows,
* preemption is disabled by raising the processor IRQL to DISPATCH_LEVEL.
* This stops other threads from running, but does _not_ block device
* interrupts. This means ISRs can still run, and they can make other
* threads runable, but those other threads won't be able to execute
* until the current thread lowers the IRQL to something less than
* DISPATCH_LEVEL.
*
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
* There's another commonly used IRQL in Windows, which is APC_LEVEL.
* An APC is an Asynchronous Procedure Call, which differs from a DPC
* (Defered Procedure Call) in that a DPC is queued up to run in
* another thread, while an APC runs in the thread that scheduled
* it (similar to a signal handler in a UNIX process). We don't
* actually support the notion of APCs in FreeBSD, so for now, the
* only IRQLs we're interested in are DISPATCH_LEVEL and PASSIVE_LEVEL.
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
*
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
* To simulate DISPATCH_LEVEL, we raise the current thread's priority
* to PI_REALTIME, which is the highest we can give it. This should,
* if I understand things correctly, prevent anything except for an
* interrupt thread from preempting us. PASSIVE_LEVEL is basically
* everything else.
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
*
* Be aware that, at least on the x86 arch, the Windows spinlock
* functions are divided up in peculiar ways. The actual spinlock
* functions are KfAcquireSpinLock() and KfReleaseSpinLock(), and
* they live in HAL.dll. Meanwhile, KeInitializeSpinLock(),
* KefAcquireSpinLockAtDpcLevel() and KefReleaseSpinLockFromDpcLevel()
* live in ntoskrnl.exe. Most Windows source code will call
* KeAcquireSpinLock() and KeReleaseSpinLock(), but these are just
* macros that call KfAcquireSpinLock() and KfReleaseSpinLock().
* KefAcquireSpinLockAtDpcLevel() and KefReleaseSpinLockFromDpcLevel()
* perform the lock aquisition/release functions without doing the
* IRQL manipulation, and are used when one is already running at
* DISPATCH_LEVEL. Make sense? Good.
*
* According to the Microsoft documentation, any thread that calls
* KeAcquireSpinLock() must be running at IRQL <= DISPATCH_LEVEL. If
* we detect someone trying to acquire a spinlock from DEVICE_LEVEL
* or HIGH_LEVEL, we panic.
This commit makes a big round of updates and fixes many, many things. First and most importantly, I threw out the thread priority-twiddling implementation of KeRaiseIrql()/KeLowerIrq()/KeGetCurrentIrql() in favor of a new scheme that uses sleep mutexes. The old scheme was really very naughty and sought to provide the same behavior as Windows spinlocks (i.e. blocking pre-emption) but in a way that wouldn't raise the ire of WITNESS. The new scheme represents 'DISPATCH_LEVEL' as the acquisition of a per-cpu sleep mutex. If a thread on cpu0 acquires the 'dispatcher mutex,' it will block any other thread on the same processor that tries to acquire it, in effect only allowing one thread on the processor to be at 'DISPATCH_LEVEL' at any given time. It can then do the 'atomic sit and spin' routine on the spinlock variable itself. If a thread on cpu1 wants to acquire the same spinlock, it acquires the 'dispatcher mutex' for cpu1 and then it too does an atomic sit and spin to try acquiring the spinlock. Unlike real spinlocks, this does not disable pre-emption of all threads on the CPU, but it does put any threads involved with the NDISulator to sleep, which is just as good for our purposes. This means I can now play nice with WITNESS, and I can safely do things like call malloc() when I'm at 'DISPATCH_LEVEL,' which you're allowed to do in Windows. Next, I completely re-wrote most of the event/timer/mutex handling and wait code. KeWaitForSingleObject() and KeWaitForMultipleObjects() have been re-written to use condition variables instead of msleep(). This allows us to use the Windows convention whereby thread A can tell thread B "wake up with a boosted priority." (With msleep(), you instead have thread B saying "when I get woken up, I'll use this priority here," and thread A can't tell it to do otherwise.) The new KeWaitForMultipleObjects() has been better tested and better duplicates the semantics of its Windows counterpart. I also overhauled the IoQueueWorkItem() API and underlying code. Like KeInsertQueueDpc(), IoQueueWorkItem() must insure that the same work item isn't put on the queue twice. ExQueueWorkItem(), which in my implementation is built on top of IoQueueWorkItem(), was also modified to perform a similar test. I renamed the doubly-linked list macros to give them the same names as their Windows counterparts and fixed RemoveListTail() and RemoveListHead() so they properly return the removed item. I also corrected the list handling code in ntoskrnl_dpc_thread() and ntoskrnl_workitem_thread(). I realized that the original logic did not correctly handle the case where a DPC callout tries to queue up another DPC. It works correctly now. I implemented IoConnectInterrupt() and IoDisconnectInterrupt() and modified NdisMRegisterInterrupt() and NdisMDisconnectInterrupt() to use them. I also tried to duplicate the interrupt handling scheme used in Windows. The interrupt handling is now internal to ndis.ko, and the ndis_intr() function has been removed from if_ndis.c. (In the USB case, interrupt handling isn't needed in if_ndis.c anyway.) NdisMSleep() has been rewritten to use a KeWaitForSingleObject() and a KeTimer, which is how it works in Windows. (This is mainly to insure that the NDISulator uses the KeTimer API so I can spot any problems with it that may arise.) KeCancelTimer() has been changed so that it only cancels timers, and does not attempt to cancel a DPC if the timer managed to fire and queue one up before KeCancelTimer() was called. The Windows DDK documentation seems to imply that KeCantelTimer() will also call KeRemoveQueueDpc() if necessary, but it really doesn't. The KeTimer implementation has been rewritten to use the callout API directly instead of timeout()/untimeout(). I still cheat a little in that I have to manage my own small callout timer wheel, but the timer code works more smoothly now. I discovered a race condition using timeout()/untimeout() with periodic timers where untimeout() fails to actually cancel a timer. I don't quite understand where the race is, using callout_init()/callout_reset()/callout_stop() directly seems to fix it. I also discovered and fixed a bug in winx32_wrap.S related to translating _stdcall calls. There are a couple of routines (i.e. the 64-bit arithmetic intrinsics in subr_ntoskrnl) that return 64-bit quantities. On the x86 arch, 64-bit values are returned in the %eax and %edx registers. However, it happens that the ctxsw_utow() routine uses %edx as a scratch register, and x86_stdcall_wrap() and x86_stdcall_call() were only preserving %eax before branching to ctxsw_utow(). This means %edx was getting clobbered in some cases. Curiously, the most noticeable effect of this bug is that the driver for the TI AXC110 chipset would constantly drop and reacquire its link for no apparent reason. Both %eax and %edx are preserved on the stack now. The _fastcall and _regparm wrappers already handled everything correctly. I changed if_ndis to use IoAllocateWorkItem() and IoQueueWorkItem() instead of the NdisScheduleWorkItem() API. This is to avoid possible deadlocks with any drivers that use NdisScheduleWorkItem() themselves. The unicode/ansi conversion handling code has been cleaned up. The internal routines have been moved to subr_ntoskrnl and the RtlXXX routines have been exported so that subr_ndis can call them. This removes the incestuous relationship between the two modules regarding this code and fixes the implementation so that it honors the 'maxlen' fields correctly. (Previously it was possible for NdisUnicodeStringToAnsiString() to possibly clobber memory it didn't own, which was causing many mysterious crashes in the Marvell 8335 driver.) The registry handling code (NdisOpen/Close/ReadConfiguration()) has been fixed to allocate memory for all the parameters it hands out to callers and delete whem when NdisCloseConfiguration() is called. (Previously, it would secretly use a single static buffer.) I also substantially updated if_ndis so that the source can now be built on FreeBSD 7, 6 and 5 without any changes. On FreeBSD 5, only WEP support is enabled. On FreeBSD 6 and 7, WPA-PSK support is enabled. The original WPA code has been updated to fit in more cleanly with the net80211 API, and to eleminate the use of magic numbers. The ndis_80211_setstate() routine now sets a default authmode of OPEN and initializes the RTS threshold and fragmentation threshold. The WPA routines were changed so that the authentication mode is always set first, followed by the cipher. Some drivers depend on the operations being performed in this order. I also added passthrough ioctls that allow application code to directly call the MiniportSetInformation()/MiniportQueryInformation() methods via ndis_set_info() and ndis_get_info(). The ndis_linksts() routine also caches the last 4 events signalled by the driver via NdisMIndicateStatus(), and they can be queried by an application via a separate ioctl. This is done to allow wpa_supplicant to directly program the various crypto and key management options in the driver, allowing things like WPA2 support to work. Whew.
2005-10-10 16:46:39 +00:00
*
* Alternate sleep-lock-based spinlock implementation
* --------------------------------------------------
*
* The earlier spinlock implementation was arguably a bit of a hack
* and presented several problems. It was basically designed to provide
* the functionality of spinlocks without incurring the wrath of
* WITNESS. We could get away with using both our spinlock implementation
* and FreeBSD sleep locks at the same time, but if WITNESS knew what
* we were really up to, it would have spanked us rather severely.
*
* There's another method we can use based entirely on sleep locks.
* First, it's important to realize that everything we're locking
* resides inside Project Evil itself: any critical data being locked
* by drivers belongs to the drivers, and should not be referenced
* by any other OS code outside of the NDISulator. The priority-based
* locking scheme has system-wide effects, just like real spinlocks
* (blocking preemption affects the whole CPU), but since we keep all
* our critical data private, we can use a simpler mechanism that
* affects only code/threads directly related to Project Evil.
*
* The idea is to create a sleep lock mutex for each CPU in the system.
* When a CPU running in the NDISulator wants to acquire a spinlock, it
* does the following:
* - Pin ourselves to the current CPU
* - Acquire the mutex for the current CPU
* - Spin on the spinlock variable using atomic test and set, just like
* a real spinlock.
* - Once we have the lock, we execute our critical code
*
* To give up the lock, we do:
* - Clear the spinlock variable with an atomic op
* - Release the per-CPU mutex
* - Unpin ourselves from the current CPU.
*
* On a uniprocessor system, this means all threads that access protected
* data are serialized through the per-CPU mutex. After one thread
* acquires the 'spinlock,' any other thread that uses a spinlock on the
* current CPU will block on the per-CPU mutex, which has the same general
* effect of blocking pre-emption, but _only_ for those threads that are
* running NDISulator code.
*
* On a multiprocessor system, threads on different CPUs all block on
* their respective per-CPU mutex, and the atomic test/set operation
* on the spinlock variable provides inter-CPU synchronization, though
* only for threads running NDISulator code.
*
* This method solves an important problem. In Windows, you're allowed
* to do an ExAllocatePoolWithTag() with a spinlock held, provided you
* allocate from NonPagedPool. This implies an atomic heap allocation
* that will not cause the current thread to sleep. (You can't sleep
* while holding real spinlock: clowns will eat you.) But in FreeBSD,
* malloc(9) _always_ triggers the acquisition of a sleep lock, even
* when you use M_NOWAIT. This is not a problem for FreeBSD native
* code: you're allowed to sleep in things like interrupt threads. But
* it is a problem with the old priority-based spinlock implementation:
* even though we get away with it most of the time, we really can't
* do a malloc(9) after doing a KeAcquireSpinLock() or KeRaiseIrql().
* With the new implementation, it's not a problem: you're allowed to
* acquire more than one sleep lock (as long as you avoid lock order
* reversals).
*
* The one drawback to this approach is that now we have a lot of
* contention on one per-CPU mutex within the NDISulator code. Whether
* or not this is preferable to the expected Windows spinlock behavior
* of blocking pre-emption is debatable.
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
*/
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
uint8_t
KfAcquireSpinLock(lock)
kspin_lock *lock;
Tweak ndiscvt to support yet another flavor of .INF files (look for the NTx86 section decoration). subr_ndis.c: correct the behavior of ndis_query_resources(): if the caller doesn't provide enough space to return the resources, tell it how much it needs to provide and return an error. subr_hal.c & subr_ntoskrnl.c: implement/stub a bunch of new routines; ntoskrnl: KefAcquireSpinLockAtDpcLevel KefReleaseSpinLockFromDpcLevel MmMapLockedPages InterlockedDecrement InterlockedIncrement IoFreeMdl KeInitializeSpinLock HAL: KfReleaseSpinLock KeGetCurrentIrql KfAcquireSpinLock Lastly, correct spelling of "_aullshr" in the ntoskrnl functable.
2004-01-03 02:25:21 +00:00
{
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
uint8_t oldirql;
Tweak ndiscvt to support yet another flavor of .INF files (look for the NTx86 section decoration). subr_ndis.c: correct the behavior of ndis_query_resources(): if the caller doesn't provide enough space to return the resources, tell it how much it needs to provide and return an error. subr_hal.c & subr_ntoskrnl.c: implement/stub a bunch of new routines; ntoskrnl: KefAcquireSpinLockAtDpcLevel KefReleaseSpinLockFromDpcLevel MmMapLockedPages InterlockedDecrement InterlockedIncrement IoFreeMdl KeInitializeSpinLock HAL: KfReleaseSpinLock KeGetCurrentIrql KfAcquireSpinLock Lastly, correct spelling of "_aullshr" in the ntoskrnl functable.
2004-01-03 02:25:21 +00:00
Correct the macro definition for KeRaiseIrql(). The official API is KeRaiseIrql(newirql, &oldirql), not oldirql = KeRaiseIrql(newirql). (The macro ultimately translates to KfRaiseIrql() which does use the latter API, so this has no effect on generated code.) Also, wait for thread termination the right way: kthread_exit() will ultimately do a wakeup(td->td_proc). This is the event we should wait on. Eliminate the previous synchronization machinery for this since it was never guaranteed to work correctly.
2005-10-21 05:23:20 +00:00
KeRaiseIrql(DISPATCH_LEVEL, &oldirql);
Fix for amd64.
2005-03-28 20:13:14 +00:00
KeAcquireSpinLockAtDpcLevel(lock);
- Use memory barrier with atomic operations in ntoskrnl_lock_dpc() and ntoskrnl_unlocl_dpc(). - hal_raise_irql(), hal_lower_irql() and hal_irql() didn't work right on SMP (priority inheritance makes things... interesting). For now, use only two states: DISPATCH_LEVEL (PI_REALTIME) and PASSIVE_LEVEL (everything else). Tested on a dual PIII box. - Use ndis_thsuspend() in ndis_sleep() instead of tsleep(). (I added ndis_thsuspend() and ndis_thresume() to replace kthread_suspend() and kthread_resume(); the former will preserve a thread's priority when it wakes up, the latter will not.) - Change use of tsleep() in ndis_stop_thread() to prevent priority change on wakeup.
2004-04-16 00:04:28 +00:00
Big style cleanup. While there remove references to FreeBSD versions older than 6.0. Submitted by: Paul B Mahol <onemda at gmail.com>
2009-11-02 11:07:42 +00:00
return (oldirql);
Tweak ndiscvt to support yet another flavor of .INF files (look for the NTx86 section decoration). subr_ndis.c: correct the behavior of ndis_query_resources(): if the caller doesn't provide enough space to return the resources, tell it how much it needs to provide and return an error. subr_hal.c & subr_ntoskrnl.c: implement/stub a bunch of new routines; ntoskrnl: KefAcquireSpinLockAtDpcLevel KefReleaseSpinLockFromDpcLevel MmMapLockedPages InterlockedDecrement InterlockedIncrement IoFreeMdl KeInitializeSpinLock HAL: KfReleaseSpinLock KeGetCurrentIrql KfAcquireSpinLock Lastly, correct spelling of "_aullshr" in the ntoskrnl functable.
2004-01-03 02:25:21 +00:00
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
void
Change the functions to ANSI in those cases where it breaks promotion to int rule. See ISO C Standard: SS6.7.5.3:15. Approved by: kib (mentor) Reviewed by: warner Tested by: silence on -current
2009-02-24 18:09:31 +00:00
KfReleaseSpinLock(kspin_lock *lock, uint8_t newirql)
Tweak ndiscvt to support yet another flavor of .INF files (look for the NTx86 section decoration). subr_ndis.c: correct the behavior of ndis_query_resources(): if the caller doesn't provide enough space to return the resources, tell it how much it needs to provide and return an error. subr_hal.c & subr_ntoskrnl.c: implement/stub a bunch of new routines; ntoskrnl: KefAcquireSpinLockAtDpcLevel KefReleaseSpinLockFromDpcLevel MmMapLockedPages InterlockedDecrement InterlockedIncrement IoFreeMdl KeInitializeSpinLock HAL: KfReleaseSpinLock KeGetCurrentIrql KfAcquireSpinLock Lastly, correct spelling of "_aullshr" in the ntoskrnl functable.
2004-01-03 02:25:21 +00:00
{
Fix for amd64.
2005-03-28 20:13:14 +00:00
KeReleaseSpinLockFromDpcLevel(lock);
KeLowerIrql(newirql);
Tweak ndiscvt to support yet another flavor of .INF files (look for the NTx86 section decoration). subr_ndis.c: correct the behavior of ndis_query_resources(): if the caller doesn't provide enough space to return the resources, tell it how much it needs to provide and return an error. subr_hal.c & subr_ntoskrnl.c: implement/stub a bunch of new routines; ntoskrnl: KefAcquireSpinLockAtDpcLevel KefReleaseSpinLockFromDpcLevel MmMapLockedPages InterlockedDecrement InterlockedIncrement IoFreeMdl KeInitializeSpinLock HAL: KfReleaseSpinLock KeGetCurrentIrql KfAcquireSpinLock Lastly, correct spelling of "_aullshr" in the ntoskrnl functable.
2004-01-03 02:25:21 +00:00
}
This commit makes a big round of updates and fixes many, many things. First and most importantly, I threw out the thread priority-twiddling implementation of KeRaiseIrql()/KeLowerIrq()/KeGetCurrentIrql() in favor of a new scheme that uses sleep mutexes. The old scheme was really very naughty and sought to provide the same behavior as Windows spinlocks (i.e. blocking pre-emption) but in a way that wouldn't raise the ire of WITNESS. The new scheme represents 'DISPATCH_LEVEL' as the acquisition of a per-cpu sleep mutex. If a thread on cpu0 acquires the 'dispatcher mutex,' it will block any other thread on the same processor that tries to acquire it, in effect only allowing one thread on the processor to be at 'DISPATCH_LEVEL' at any given time. It can then do the 'atomic sit and spin' routine on the spinlock variable itself. If a thread on cpu1 wants to acquire the same spinlock, it acquires the 'dispatcher mutex' for cpu1 and then it too does an atomic sit and spin to try acquiring the spinlock. Unlike real spinlocks, this does not disable pre-emption of all threads on the CPU, but it does put any threads involved with the NDISulator to sleep, which is just as good for our purposes. This means I can now play nice with WITNESS, and I can safely do things like call malloc() when I'm at 'DISPATCH_LEVEL,' which you're allowed to do in Windows. Next, I completely re-wrote most of the event/timer/mutex handling and wait code. KeWaitForSingleObject() and KeWaitForMultipleObjects() have been re-written to use condition variables instead of msleep(). This allows us to use the Windows convention whereby thread A can tell thread B "wake up with a boosted priority." (With msleep(), you instead have thread B saying "when I get woken up, I'll use this priority here," and thread A can't tell it to do otherwise.) The new KeWaitForMultipleObjects() has been better tested and better duplicates the semantics of its Windows counterpart. I also overhauled the IoQueueWorkItem() API and underlying code. Like KeInsertQueueDpc(), IoQueueWorkItem() must insure that the same work item isn't put on the queue twice. ExQueueWorkItem(), which in my implementation is built on top of IoQueueWorkItem(), was also modified to perform a similar test. I renamed the doubly-linked list macros to give them the same names as their Windows counterparts and fixed RemoveListTail() and RemoveListHead() so they properly return the removed item. I also corrected the list handling code in ntoskrnl_dpc_thread() and ntoskrnl_workitem_thread(). I realized that the original logic did not correctly handle the case where a DPC callout tries to queue up another DPC. It works correctly now. I implemented IoConnectInterrupt() and IoDisconnectInterrupt() and modified NdisMRegisterInterrupt() and NdisMDisconnectInterrupt() to use them. I also tried to duplicate the interrupt handling scheme used in Windows. The interrupt handling is now internal to ndis.ko, and the ndis_intr() function has been removed from if_ndis.c. (In the USB case, interrupt handling isn't needed in if_ndis.c anyway.) NdisMSleep() has been rewritten to use a KeWaitForSingleObject() and a KeTimer, which is how it works in Windows. (This is mainly to insure that the NDISulator uses the KeTimer API so I can spot any problems with it that may arise.) KeCancelTimer() has been changed so that it only cancels timers, and does not attempt to cancel a DPC if the timer managed to fire and queue one up before KeCancelTimer() was called. The Windows DDK documentation seems to imply that KeCantelTimer() will also call KeRemoveQueueDpc() if necessary, but it really doesn't. The KeTimer implementation has been rewritten to use the callout API directly instead of timeout()/untimeout(). I still cheat a little in that I have to manage my own small callout timer wheel, but the timer code works more smoothly now. I discovered a race condition using timeout()/untimeout() with periodic timers where untimeout() fails to actually cancel a timer. I don't quite understand where the race is, using callout_init()/callout_reset()/callout_stop() directly seems to fix it. I also discovered and fixed a bug in winx32_wrap.S related to translating _stdcall calls. There are a couple of routines (i.e. the 64-bit arithmetic intrinsics in subr_ntoskrnl) that return 64-bit quantities. On the x86 arch, 64-bit values are returned in the %eax and %edx registers. However, it happens that the ctxsw_utow() routine uses %edx as a scratch register, and x86_stdcall_wrap() and x86_stdcall_call() were only preserving %eax before branching to ctxsw_utow(). This means %edx was getting clobbered in some cases. Curiously, the most noticeable effect of this bug is that the driver for the TI AXC110 chipset would constantly drop and reacquire its link for no apparent reason. Both %eax and %edx are preserved on the stack now. The _fastcall and _regparm wrappers already handled everything correctly. I changed if_ndis to use IoAllocateWorkItem() and IoQueueWorkItem() instead of the NdisScheduleWorkItem() API. This is to avoid possible deadlocks with any drivers that use NdisScheduleWorkItem() themselves. The unicode/ansi conversion handling code has been cleaned up. The internal routines have been moved to subr_ntoskrnl and the RtlXXX routines have been exported so that subr_ndis can call them. This removes the incestuous relationship between the two modules regarding this code and fixes the implementation so that it honors the 'maxlen' fields correctly. (Previously it was possible for NdisUnicodeStringToAnsiString() to possibly clobber memory it didn't own, which was causing many mysterious crashes in the Marvell 8335 driver.) The registry handling code (NdisOpen/Close/ReadConfiguration()) has been fixed to allocate memory for all the parameters it hands out to callers and delete whem when NdisCloseConfiguration() is called. (Previously, it would secretly use a single static buffer.) I also substantially updated if_ndis so that the source can now be built on FreeBSD 7, 6 and 5 without any changes. On FreeBSD 5, only WEP support is enabled. On FreeBSD 6 and 7, WPA-PSK support is enabled. The original WPA code has been updated to fit in more cleanly with the net80211 API, and to eleminate the use of magic numbers. The ndis_80211_setstate() routine now sets a default authmode of OPEN and initializes the RTS threshold and fragmentation threshold. The WPA routines were changed so that the authentication mode is always set first, followed by the cipher. Some drivers depend on the operations being performed in this order. I also added passthrough ioctls that allow application code to directly call the MiniportSetInformation()/MiniportQueryInformation() methods via ndis_set_info() and ndis_get_info(). The ndis_linksts() routine also caches the last 4 events signalled by the driver via NdisMIndicateStatus(), and they can be queried by an application via a separate ioctl. This is done to allow wpa_supplicant to directly program the various crypto and key management options in the driver, allowing things like WPA2 support to work. Whew.
2005-10-10 16:46:39 +00:00
uint8_t
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
KeGetCurrentIrql()
Tweak ndiscvt to support yet another flavor of .INF files (look for the NTx86 section decoration). subr_ndis.c: correct the behavior of ndis_query_resources(): if the caller doesn't provide enough space to return the resources, tell it how much it needs to provide and return an error. subr_hal.c & subr_ntoskrnl.c: implement/stub a bunch of new routines; ntoskrnl: KefAcquireSpinLockAtDpcLevel KefReleaseSpinLockFromDpcLevel MmMapLockedPages InterlockedDecrement InterlockedIncrement IoFreeMdl KeInitializeSpinLock HAL: KfReleaseSpinLock KeGetCurrentIrql KfAcquireSpinLock Lastly, correct spelling of "_aullshr" in the ntoskrnl functable.
2004-01-03 02:25:21 +00:00
{
This commit makes a big round of updates and fixes many, many things. First and most importantly, I threw out the thread priority-twiddling implementation of KeRaiseIrql()/KeLowerIrq()/KeGetCurrentIrql() in favor of a new scheme that uses sleep mutexes. The old scheme was really very naughty and sought to provide the same behavior as Windows spinlocks (i.e. blocking pre-emption) but in a way that wouldn't raise the ire of WITNESS. The new scheme represents 'DISPATCH_LEVEL' as the acquisition of a per-cpu sleep mutex. If a thread on cpu0 acquires the 'dispatcher mutex,' it will block any other thread on the same processor that tries to acquire it, in effect only allowing one thread on the processor to be at 'DISPATCH_LEVEL' at any given time. It can then do the 'atomic sit and spin' routine on the spinlock variable itself. If a thread on cpu1 wants to acquire the same spinlock, it acquires the 'dispatcher mutex' for cpu1 and then it too does an atomic sit and spin to try acquiring the spinlock. Unlike real spinlocks, this does not disable pre-emption of all threads on the CPU, but it does put any threads involved with the NDISulator to sleep, which is just as good for our purposes. This means I can now play nice with WITNESS, and I can safely do things like call malloc() when I'm at 'DISPATCH_LEVEL,' which you're allowed to do in Windows. Next, I completely re-wrote most of the event/timer/mutex handling and wait code. KeWaitForSingleObject() and KeWaitForMultipleObjects() have been re-written to use condition variables instead of msleep(). This allows us to use the Windows convention whereby thread A can tell thread B "wake up with a boosted priority." (With msleep(), you instead have thread B saying "when I get woken up, I'll use this priority here," and thread A can't tell it to do otherwise.) The new KeWaitForMultipleObjects() has been better tested and better duplicates the semantics of its Windows counterpart. I also overhauled the IoQueueWorkItem() API and underlying code. Like KeInsertQueueDpc(), IoQueueWorkItem() must insure that the same work item isn't put on the queue twice. ExQueueWorkItem(), which in my implementation is built on top of IoQueueWorkItem(), was also modified to perform a similar test. I renamed the doubly-linked list macros to give them the same names as their Windows counterparts and fixed RemoveListTail() and RemoveListHead() so they properly return the removed item. I also corrected the list handling code in ntoskrnl_dpc_thread() and ntoskrnl_workitem_thread(). I realized that the original logic did not correctly handle the case where a DPC callout tries to queue up another DPC. It works correctly now. I implemented IoConnectInterrupt() and IoDisconnectInterrupt() and modified NdisMRegisterInterrupt() and NdisMDisconnectInterrupt() to use them. I also tried to duplicate the interrupt handling scheme used in Windows. The interrupt handling is now internal to ndis.ko, and the ndis_intr() function has been removed from if_ndis.c. (In the USB case, interrupt handling isn't needed in if_ndis.c anyway.) NdisMSleep() has been rewritten to use a KeWaitForSingleObject() and a KeTimer, which is how it works in Windows. (This is mainly to insure that the NDISulator uses the KeTimer API so I can spot any problems with it that may arise.) KeCancelTimer() has been changed so that it only cancels timers, and does not attempt to cancel a DPC if the timer managed to fire and queue one up before KeCancelTimer() was called. The Windows DDK documentation seems to imply that KeCantelTimer() will also call KeRemoveQueueDpc() if necessary, but it really doesn't. The KeTimer implementation has been rewritten to use the callout API directly instead of timeout()/untimeout(). I still cheat a little in that I have to manage my own small callout timer wheel, but the timer code works more smoothly now. I discovered a race condition using timeout()/untimeout() with periodic timers where untimeout() fails to actually cancel a timer. I don't quite understand where the race is, using callout_init()/callout_reset()/callout_stop() directly seems to fix it. I also discovered and fixed a bug in winx32_wrap.S related to translating _stdcall calls. There are a couple of routines (i.e. the 64-bit arithmetic intrinsics in subr_ntoskrnl) that return 64-bit quantities. On the x86 arch, 64-bit values are returned in the %eax and %edx registers. However, it happens that the ctxsw_utow() routine uses %edx as a scratch register, and x86_stdcall_wrap() and x86_stdcall_call() were only preserving %eax before branching to ctxsw_utow(). This means %edx was getting clobbered in some cases. Curiously, the most noticeable effect of this bug is that the driver for the TI AXC110 chipset would constantly drop and reacquire its link for no apparent reason. Both %eax and %edx are preserved on the stack now. The _fastcall and _regparm wrappers already handled everything correctly. I changed if_ndis to use IoAllocateWorkItem() and IoQueueWorkItem() instead of the NdisScheduleWorkItem() API. This is to avoid possible deadlocks with any drivers that use NdisScheduleWorkItem() themselves. The unicode/ansi conversion handling code has been cleaned up. The internal routines have been moved to subr_ntoskrnl and the RtlXXX routines have been exported so that subr_ndis can call them. This removes the incestuous relationship between the two modules regarding this code and fixes the implementation so that it honors the 'maxlen' fields correctly. (Previously it was possible for NdisUnicodeStringToAnsiString() to possibly clobber memory it didn't own, which was causing many mysterious crashes in the Marvell 8335 driver.) The registry handling code (NdisOpen/Close/ReadConfiguration()) has been fixed to allocate memory for all the parameters it hands out to callers and delete whem when NdisCloseConfiguration() is called. (Previously, it would secretly use a single static buffer.) I also substantially updated if_ndis so that the source can now be built on FreeBSD 7, 6 and 5 without any changes. On FreeBSD 5, only WEP support is enabled. On FreeBSD 6 and 7, WPA-PSK support is enabled. The original WPA code has been updated to fit in more cleanly with the net80211 API, and to eleminate the use of magic numbers. The ndis_80211_setstate() routine now sets a default authmode of OPEN and initializes the RTS threshold and fragmentation threshold. The WPA routines were changed so that the authentication mode is always set first, followed by the cipher. Some drivers depend on the operations being performed in this order. I also added passthrough ioctls that allow application code to directly call the MiniportSetInformation()/MiniportQueryInformation() methods via ndis_set_info() and ndis_get_info(). The ndis_linksts() routine also caches the last 4 events signalled by the driver via NdisMIndicateStatus(), and they can be queried by an application via a separate ioctl. This is done to allow wpa_supplicant to directly program the various crypto and key management options in the driver, allowing things like WPA2 support to work. Whew.
2005-10-10 16:46:39 +00:00
if (mtx_owned(&disp_lock[curthread->td_oncpu]))
Big style cleanup. While there remove references to FreeBSD versions older than 6.0. Submitted by: Paul B Mahol <onemda at gmail.com>
2009-11-02 11:07:42 +00:00
return (DISPATCH_LEVEL);
return (PASSIVE_LEVEL);
Add a whole bunch of new stuff to make the driver for the AMD Am1771/Am1772 802.11b chipset work. This chip is present on the SMC2602W version 3 NIC, which is what was used for testing. This driver creates kernel threads (12 of them!) for various purposes, and required the following routines: PsCreateSystemThread() PsTerminateSystemThread() KeInitializeEvent() KeSetEvent() KeResetEvent() KeInitializeMutex() KeReleaseMutex() KeWaitForSingleObject() KeWaitForMultipleObjects() IoGetDeviceProperty() and several more. Also, this driver abuses the fact that NDIS events and timers are actually Windows events and timers, and uses NDIS events with KeWaitForSingleObject(). The NDIS event routines have been rewritten to interface with the ntoskrnl module. Many routines with incorrect prototypes have been cleaned up. Also, this driver puts jobs on the NDIS taskqueue (via NdisScheduleWorkItem()) which block on events, and this interferes with the operation of NdisMAllocateSharedMemoryAsync(), which was also being put on the NDIS taskqueue. To avoid the deadlock, NdisMAllocateSharedMemoryAsync() is now performed in the NDIS SWI thread instead. There's still room for some cleanups here, and I really should implement KeInitializeTimer() and friends.
2004-02-07 06:44:13 +00:00
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
static uint64_t
Begin the first phase of trying to add IRP support (and ultimately USB device support): - Convert all of my locally chosen function names to their actual Windows equivalents, where applicable. This is a big no-op change since it doesn't affect functionality, but it helps avoid a bit of confusion (it's now a lot easier to see which functions are emulated Windows API routines and which are just locally defined). - Turn ndis_buffer into an mdl, like it should have been. The structure is the same, but now it belongs to the subr_ntoskrnl module. - Implement a bunch of MDL handling macros from Windows and use them where applicable. - Correct the implementation of IoFreeMdl(). - Properly implement IoAllocateMdl() and MmBuildMdlForNonPagedPool(). - Add the definitions for struct irp and struct driver_object. - Add IMPORT_FUNC() and IMPORT_FUNC_MAP() macros to make formatting the module function tables a little cleaner. (Should also help with AMD64 support later on.) - Fix if_ndis.c to use KeRaiseIrql() and KeLowerIrql() instead of the previous calls to hal_raise_irql() and hal_lower_irql() which have been renamed. The function renaming generated a lot of churn here, but there should be very little operational effect.
2005-01-24 18:18:12 +00:00
KeQueryPerformanceCounter(freq)
Add a whole bunch of new stuff to make the driver for the AMD Am1771/Am1772 802.11b chipset work. This chip is present on the SMC2602W version 3 NIC, which is what was used for testing. This driver creates kernel threads (12 of them!) for various purposes, and required the following routines: PsCreateSystemThread() PsTerminateSystemThread() KeInitializeEvent() KeSetEvent() KeResetEvent() KeInitializeMutex() KeReleaseMutex() KeWaitForSingleObject() KeWaitForMultipleObjects() IoGetDeviceProperty() and several more. Also, this driver abuses the fact that NDIS events and timers are actually Windows events and timers, and uses NDIS events with KeWaitForSingleObject(). The NDIS event routines have been rewritten to interface with the ntoskrnl module. Many routines with incorrect prototypes have been cleaned up. Also, this driver puts jobs on the NDIS taskqueue (via NdisScheduleWorkItem()) which block on events, and this interferes with the operation of NdisMAllocateSharedMemoryAsync(), which was also being put on the NDIS taskqueue. To avoid the deadlock, NdisMAllocateSharedMemoryAsync() is now performed in the NDIS SWI thread instead. There's still room for some cleanups here, and I really should implement KeInitializeTimer() and friends.
2004-02-07 06:44:13 +00:00
uint64_t *freq;
{
if (freq != NULL)
*freq = hz;
Big style cleanup. While there remove references to FreeBSD versions older than 6.0. Submitted by: Paul B Mahol <onemda at gmail.com>
2009-11-02 11:07:42 +00:00
return ((uint64_t)ticks);
Tweak ndiscvt to support yet another flavor of .INF files (look for the NTx86 section decoration). subr_ndis.c: correct the behavior of ndis_query_resources(): if the caller doesn't provide enough space to return the resources, tell it how much it needs to provide and return an error. subr_hal.c & subr_ntoskrnl.c: implement/stub a bunch of new routines; ntoskrnl: KefAcquireSpinLockAtDpcLevel KefReleaseSpinLockFromDpcLevel MmMapLockedPages InterlockedDecrement InterlockedIncrement IoFreeMdl KeInitializeSpinLock HAL: KfReleaseSpinLock KeGetCurrentIrql KfAcquireSpinLock Lastly, correct spelling of "_aullshr" in the ntoskrnl functable.
2004-01-03 02:25:21 +00:00
}
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
uint8_t
Change the functions to ANSI in those cases where it breaks promotion to int rule. See ISO C Standard: SS6.7.5.3:15. Approved by: kib (mentor) Reviewed by: warner Tested by: silence on -current
2009-02-24 18:09:31 +00:00
KfRaiseIrql(uint8_t irql)
Add stub implementations of KfLowerIrql() and KfRaiseIrql() (both of which are _fastcall).
2004-02-09 19:13:58 +00:00
{
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
uint8_t oldirql;
Add stub implementations of KfLowerIrql() and KfRaiseIrql() (both of which are _fastcall).
2004-02-09 19:13:58 +00:00
Fix race condition in KfRaiseIrql(). After getting the current irql, if the kthread gets preempted and subsequently runs on a different CPU, the saved irql could be wrong. Also, correct the panic string. PR: kern/165630 Submitted by: Vladislav Movchan <vladislav.movchan at gmail.com>
2012-03-04 17:08:43 +00:00
sched_pin();
This commit makes a big round of updates and fixes many, many things. First and most importantly, I threw out the thread priority-twiddling implementation of KeRaiseIrql()/KeLowerIrq()/KeGetCurrentIrql() in favor of a new scheme that uses sleep mutexes. The old scheme was really very naughty and sought to provide the same behavior as Windows spinlocks (i.e. blocking pre-emption) but in a way that wouldn't raise the ire of WITNESS. The new scheme represents 'DISPATCH_LEVEL' as the acquisition of a per-cpu sleep mutex. If a thread on cpu0 acquires the 'dispatcher mutex,' it will block any other thread on the same processor that tries to acquire it, in effect only allowing one thread on the processor to be at 'DISPATCH_LEVEL' at any given time. It can then do the 'atomic sit and spin' routine on the spinlock variable itself. If a thread on cpu1 wants to acquire the same spinlock, it acquires the 'dispatcher mutex' for cpu1 and then it too does an atomic sit and spin to try acquiring the spinlock. Unlike real spinlocks, this does not disable pre-emption of all threads on the CPU, but it does put any threads involved with the NDISulator to sleep, which is just as good for our purposes. This means I can now play nice with WITNESS, and I can safely do things like call malloc() when I'm at 'DISPATCH_LEVEL,' which you're allowed to do in Windows. Next, I completely re-wrote most of the event/timer/mutex handling and wait code. KeWaitForSingleObject() and KeWaitForMultipleObjects() have been re-written to use condition variables instead of msleep(). This allows us to use the Windows convention whereby thread A can tell thread B "wake up with a boosted priority." (With msleep(), you instead have thread B saying "when I get woken up, I'll use this priority here," and thread A can't tell it to do otherwise.) The new KeWaitForMultipleObjects() has been better tested and better duplicates the semantics of its Windows counterpart. I also overhauled the IoQueueWorkItem() API and underlying code. Like KeInsertQueueDpc(), IoQueueWorkItem() must insure that the same work item isn't put on the queue twice. ExQueueWorkItem(), which in my implementation is built on top of IoQueueWorkItem(), was also modified to perform a similar test. I renamed the doubly-linked list macros to give them the same names as their Windows counterparts and fixed RemoveListTail() and RemoveListHead() so they properly return the removed item. I also corrected the list handling code in ntoskrnl_dpc_thread() and ntoskrnl_workitem_thread(). I realized that the original logic did not correctly handle the case where a DPC callout tries to queue up another DPC. It works correctly now. I implemented IoConnectInterrupt() and IoDisconnectInterrupt() and modified NdisMRegisterInterrupt() and NdisMDisconnectInterrupt() to use them. I also tried to duplicate the interrupt handling scheme used in Windows. The interrupt handling is now internal to ndis.ko, and the ndis_intr() function has been removed from if_ndis.c. (In the USB case, interrupt handling isn't needed in if_ndis.c anyway.) NdisMSleep() has been rewritten to use a KeWaitForSingleObject() and a KeTimer, which is how it works in Windows. (This is mainly to insure that the NDISulator uses the KeTimer API so I can spot any problems with it that may arise.) KeCancelTimer() has been changed so that it only cancels timers, and does not attempt to cancel a DPC if the timer managed to fire and queue one up before KeCancelTimer() was called. The Windows DDK documentation seems to imply that KeCantelTimer() will also call KeRemoveQueueDpc() if necessary, but it really doesn't. The KeTimer implementation has been rewritten to use the callout API directly instead of timeout()/untimeout(). I still cheat a little in that I have to manage my own small callout timer wheel, but the timer code works more smoothly now. I discovered a race condition using timeout()/untimeout() with periodic timers where untimeout() fails to actually cancel a timer. I don't quite understand where the race is, using callout_init()/callout_reset()/callout_stop() directly seems to fix it. I also discovered and fixed a bug in winx32_wrap.S related to translating _stdcall calls. There are a couple of routines (i.e. the 64-bit arithmetic intrinsics in subr_ntoskrnl) that return 64-bit quantities. On the x86 arch, 64-bit values are returned in the %eax and %edx registers. However, it happens that the ctxsw_utow() routine uses %edx as a scratch register, and x86_stdcall_wrap() and x86_stdcall_call() were only preserving %eax before branching to ctxsw_utow(). This means %edx was getting clobbered in some cases. Curiously, the most noticeable effect of this bug is that the driver for the TI AXC110 chipset would constantly drop and reacquire its link for no apparent reason. Both %eax and %edx are preserved on the stack now. The _fastcall and _regparm wrappers already handled everything correctly. I changed if_ndis to use IoAllocateWorkItem() and IoQueueWorkItem() instead of the NdisScheduleWorkItem() API. This is to avoid possible deadlocks with any drivers that use NdisScheduleWorkItem() themselves. The unicode/ansi conversion handling code has been cleaned up. The internal routines have been moved to subr_ntoskrnl and the RtlXXX routines have been exported so that subr_ndis can call them. This removes the incestuous relationship between the two modules regarding this code and fixes the implementation so that it honors the 'maxlen' fields correctly. (Previously it was possible for NdisUnicodeStringToAnsiString() to possibly clobber memory it didn't own, which was causing many mysterious crashes in the Marvell 8335 driver.) The registry handling code (NdisOpen/Close/ReadConfiguration()) has been fixed to allocate memory for all the parameters it hands out to callers and delete whem when NdisCloseConfiguration() is called. (Previously, it would secretly use a single static buffer.) I also substantially updated if_ndis so that the source can now be built on FreeBSD 7, 6 and 5 without any changes. On FreeBSD 5, only WEP support is enabled. On FreeBSD 6 and 7, WPA-PSK support is enabled. The original WPA code has been updated to fit in more cleanly with the net80211 API, and to eleminate the use of magic numbers. The ndis_80211_setstate() routine now sets a default authmode of OPEN and initializes the RTS threshold and fragmentation threshold. The WPA routines were changed so that the authentication mode is always set first, followed by the cipher. Some drivers depend on the operations being performed in this order. I also added passthrough ioctls that allow application code to directly call the MiniportSetInformation()/MiniportQueryInformation() methods via ndis_set_info() and ndis_get_info(). The ndis_linksts() routine also caches the last 4 events signalled by the driver via NdisMIndicateStatus(), and they can be queried by an application via a separate ioctl. This is done to allow wpa_supplicant to directly program the various crypto and key management options in the driver, allowing things like WPA2 support to work. Whew.
2005-10-10 16:46:39 +00:00
oldirql = KeGetCurrentIrql();
The latest version of the Intel 2200BG/2915ABG driver (9.0.0.3-9) from Intel's web site requires some minor tweaks to get it to work: - The driver seems to have been released with full WMI tracing enabled, and makes references to some WMI APIs, namely IoWMIRegistrationControl(), WmiQueryTraceInformation() and WmiTraceMessage(). Only the first one is ever called (during intialization). These have been implemented as do-nothing stubs for now. Also added a definition for STATUS_NOT_FOUND to ntoskrnl_var.h, which is used as a return code for one of the WMI routines. - The driver references KeRaiseIrqlToDpcLevel() and KeLowerIrql() (the latter as a function, which is unusual because normally KeLowerIrql() is a macro in the Windows DDK that calls KfLowewIrql()). I'm not sure why these are being called since they're not really part of WDM. Presumeably they're being used for backwards compatibility with old versions of Windows. These have been implemented in subr_hal.c. (Note that they're _stdcall routines instead of _fastcall.) - When querying the OID_802_11_BSSID_LIST OID to get a BSSID list, you don't know ahead of time how many networks the NIC has found during scanning, so you're allowed to pass 0 as the list length. This should cause the driver to return an 'insufficient resources' error and set the length to indicate how many bytes are actually needed. However for some reason, the Intel driver does not honor this convention: if you give it a length of 0, it returns some other error and doesn't tell you how much space is really needed. To get around this, if using a length of 0 yields anything besides the expected error case, we arbitrarily assume a length of 64K. This is similar to the hack that wpa_supplicant uses when doing a BSSID list query.
2005-11-06 19:38:34 +00:00
/* I am so going to hell for this. */
if (oldirql > irql)
Fix race condition in KfRaiseIrql(). After getting the current irql, if the kthread gets preempted and subsequently runs on a different CPU, the saved irql could be wrong. Also, correct the panic string. PR: kern/165630 Submitted by: Vladislav Movchan <vladislav.movchan at gmail.com>
2012-03-04 17:08:43 +00:00
panic("IRQL_NOT_LESS_THAN_OR_EQUAL");
- Use memory barrier with atomic operations in ntoskrnl_lock_dpc() and ntoskrnl_unlocl_dpc(). - hal_raise_irql(), hal_lower_irql() and hal_irql() didn't work right on SMP (priority inheritance makes things... interesting). For now, use only two states: DISPATCH_LEVEL (PI_REALTIME) and PASSIVE_LEVEL (everything else). Tested on a dual PIII box. - Use ndis_thsuspend() in ndis_sleep() instead of tsleep(). (I added ndis_thsuspend() and ndis_thresume() to replace kthread_suspend() and kthread_resume(); the former will preserve a thread's priority when it wakes up, the latter will not.) - Change use of tsleep() in ndis_stop_thread() to prevent priority change on wakeup.
2004-04-16 00:04:28 +00:00
Fix race condition in KfRaiseIrql(). After getting the current irql, if the kthread gets preempted and subsequently runs on a different CPU, the saved irql could be wrong. Also, correct the panic string. PR: kern/165630 Submitted by: Vladislav Movchan <vladislav.movchan at gmail.com>
2012-03-04 17:08:43 +00:00
if (oldirql != DISPATCH_LEVEL)
This commit makes a big round of updates and fixes many, many things. First and most importantly, I threw out the thread priority-twiddling implementation of KeRaiseIrql()/KeLowerIrq()/KeGetCurrentIrql() in favor of a new scheme that uses sleep mutexes. The old scheme was really very naughty and sought to provide the same behavior as Windows spinlocks (i.e. blocking pre-emption) but in a way that wouldn't raise the ire of WITNESS. The new scheme represents 'DISPATCH_LEVEL' as the acquisition of a per-cpu sleep mutex. If a thread on cpu0 acquires the 'dispatcher mutex,' it will block any other thread on the same processor that tries to acquire it, in effect only allowing one thread on the processor to be at 'DISPATCH_LEVEL' at any given time. It can then do the 'atomic sit and spin' routine on the spinlock variable itself. If a thread on cpu1 wants to acquire the same spinlock, it acquires the 'dispatcher mutex' for cpu1 and then it too does an atomic sit and spin to try acquiring the spinlock. Unlike real spinlocks, this does not disable pre-emption of all threads on the CPU, but it does put any threads involved with the NDISulator to sleep, which is just as good for our purposes. This means I can now play nice with WITNESS, and I can safely do things like call malloc() when I'm at 'DISPATCH_LEVEL,' which you're allowed to do in Windows. Next, I completely re-wrote most of the event/timer/mutex handling and wait code. KeWaitForSingleObject() and KeWaitForMultipleObjects() have been re-written to use condition variables instead of msleep(). This allows us to use the Windows convention whereby thread A can tell thread B "wake up with a boosted priority." (With msleep(), you instead have thread B saying "when I get woken up, I'll use this priority here," and thread A can't tell it to do otherwise.) The new KeWaitForMultipleObjects() has been better tested and better duplicates the semantics of its Windows counterpart. I also overhauled the IoQueueWorkItem() API and underlying code. Like KeInsertQueueDpc(), IoQueueWorkItem() must insure that the same work item isn't put on the queue twice. ExQueueWorkItem(), which in my implementation is built on top of IoQueueWorkItem(), was also modified to perform a similar test. I renamed the doubly-linked list macros to give them the same names as their Windows counterparts and fixed RemoveListTail() and RemoveListHead() so they properly return the removed item. I also corrected the list handling code in ntoskrnl_dpc_thread() and ntoskrnl_workitem_thread(). I realized that the original logic did not correctly handle the case where a DPC callout tries to queue up another DPC. It works correctly now. I implemented IoConnectInterrupt() and IoDisconnectInterrupt() and modified NdisMRegisterInterrupt() and NdisMDisconnectInterrupt() to use them. I also tried to duplicate the interrupt handling scheme used in Windows. The interrupt handling is now internal to ndis.ko, and the ndis_intr() function has been removed from if_ndis.c. (In the USB case, interrupt handling isn't needed in if_ndis.c anyway.) NdisMSleep() has been rewritten to use a KeWaitForSingleObject() and a KeTimer, which is how it works in Windows. (This is mainly to insure that the NDISulator uses the KeTimer API so I can spot any problems with it that may arise.) KeCancelTimer() has been changed so that it only cancels timers, and does not attempt to cancel a DPC if the timer managed to fire and queue one up before KeCancelTimer() was called. The Windows DDK documentation seems to imply that KeCantelTimer() will also call KeRemoveQueueDpc() if necessary, but it really doesn't. The KeTimer implementation has been rewritten to use the callout API directly instead of timeout()/untimeout(). I still cheat a little in that I have to manage my own small callout timer wheel, but the timer code works more smoothly now. I discovered a race condition using timeout()/untimeout() with periodic timers where untimeout() fails to actually cancel a timer. I don't quite understand where the race is, using callout_init()/callout_reset()/callout_stop() directly seems to fix it. I also discovered and fixed a bug in winx32_wrap.S related to translating _stdcall calls. There are a couple of routines (i.e. the 64-bit arithmetic intrinsics in subr_ntoskrnl) that return 64-bit quantities. On the x86 arch, 64-bit values are returned in the %eax and %edx registers. However, it happens that the ctxsw_utow() routine uses %edx as a scratch register, and x86_stdcall_wrap() and x86_stdcall_call() were only preserving %eax before branching to ctxsw_utow(). This means %edx was getting clobbered in some cases. Curiously, the most noticeable effect of this bug is that the driver for the TI AXC110 chipset would constantly drop and reacquire its link for no apparent reason. Both %eax and %edx are preserved on the stack now. The _fastcall and _regparm wrappers already handled everything correctly. I changed if_ndis to use IoAllocateWorkItem() and IoQueueWorkItem() instead of the NdisScheduleWorkItem() API. This is to avoid possible deadlocks with any drivers that use NdisScheduleWorkItem() themselves. The unicode/ansi conversion handling code has been cleaned up. The internal routines have been moved to subr_ntoskrnl and the RtlXXX routines have been exported so that subr_ndis can call them. This removes the incestuous relationship between the two modules regarding this code and fixes the implementation so that it honors the 'maxlen' fields correctly. (Previously it was possible for NdisUnicodeStringToAnsiString() to possibly clobber memory it didn't own, which was causing many mysterious crashes in the Marvell 8335 driver.) The registry handling code (NdisOpen/Close/ReadConfiguration()) has been fixed to allocate memory for all the parameters it hands out to callers and delete whem when NdisCloseConfiguration() is called. (Previously, it would secretly use a single static buffer.) I also substantially updated if_ndis so that the source can now be built on FreeBSD 7, 6 and 5 without any changes. On FreeBSD 5, only WEP support is enabled. On FreeBSD 6 and 7, WPA-PSK support is enabled. The original WPA code has been updated to fit in more cleanly with the net80211 API, and to eleminate the use of magic numbers. The ndis_80211_setstate() routine now sets a default authmode of OPEN and initializes the RTS threshold and fragmentation threshold. The WPA routines were changed so that the authentication mode is always set first, followed by the cipher. Some drivers depend on the operations being performed in this order. I also added passthrough ioctls that allow application code to directly call the MiniportSetInformation()/MiniportQueryInformation() methods via ndis_set_info() and ndis_get_info(). The ndis_linksts() routine also caches the last 4 events signalled by the driver via NdisMIndicateStatus(), and they can be queried by an application via a separate ioctl. This is done to allow wpa_supplicant to directly program the various crypto and key management options in the driver, allowing things like WPA2 support to work. Whew.
2005-10-10 16:46:39 +00:00
mtx_lock(&disp_lock[curthread->td_oncpu]);
Fix race condition in KfRaiseIrql(). After getting the current irql, if the kthread gets preempted and subsequently runs on a different CPU, the saved irql could be wrong. Also, correct the panic string. PR: kern/165630 Submitted by: Vladislav Movchan <vladislav.movchan at gmail.com>
2012-03-04 17:08:43 +00:00
else
sched_unpin();
The latest version of the Intel 2200BG/2915ABG driver (9.0.0.3-9) from Intel's web site requires some minor tweaks to get it to work: - The driver seems to have been released with full WMI tracing enabled, and makes references to some WMI APIs, namely IoWMIRegistrationControl(), WmiQueryTraceInformation() and WmiTraceMessage(). Only the first one is ever called (during intialization). These have been implemented as do-nothing stubs for now. Also added a definition for STATUS_NOT_FOUND to ntoskrnl_var.h, which is used as a return code for one of the WMI routines. - The driver references KeRaiseIrqlToDpcLevel() and KeLowerIrql() (the latter as a function, which is unusual because normally KeLowerIrql() is a macro in the Windows DDK that calls KfLowewIrql()). I'm not sure why these are being called since they're not really part of WDM. Presumeably they're being used for backwards compatibility with old versions of Windows. These have been implemented in subr_hal.c. (Note that they're _stdcall routines instead of _fastcall.) - When querying the OID_802_11_BSSID_LIST OID to get a BSSID list, you don't know ahead of time how many networks the NIC has found during scanning, so you're allowed to pass 0 as the list length. This should cause the driver to return an 'insufficient resources' error and set the length to indicate how many bytes are actually needed. However for some reason, the Intel driver does not honor this convention: if you give it a length of 0, it returns some other error and doesn't tell you how much space is really needed. To get around this, if using a length of 0 yields anything besides the expected error case, we arbitrarily assume a length of 64K. This is similar to the hack that wpa_supplicant uses when doing a BSSID list query.
2005-11-06 19:38:34 +00:00
/*printf("RAISE IRQL: %d %d\n", irql, oldirql);*/
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
Big style cleanup. While there remove references to FreeBSD versions older than 6.0. Submitted by: Paul B Mahol <onemda at gmail.com>
2009-11-02 11:07:42 +00:00
return (oldirql);
Add stub implementations of KfLowerIrql() and KfRaiseIrql() (both of which are _fastcall).
2004-02-09 19:13:58 +00:00
}
o port NDIS USB support from USB1 to the new usb(USB2). o implement URB_FUNCTION_ABORT_PIPE handling. o remove unused code related with canceling the timer list for USB drivers. o whitespace cleanup and style(9) Obtained from: hps's original patch
2009-03-07 07:26:22 +00:00
void
Change the functions to ANSI in those cases where it breaks promotion to int rule. See ISO C Standard: SS6.7.5.3:15. Approved by: kib (mentor) Reviewed by: warner Tested by: silence on -current
2009-02-24 18:09:31 +00:00
KfLowerIrql(uint8_t oldirql)
Add stub implementations of KfLowerIrql() and KfRaiseIrql() (both of which are _fastcall).
2004-02-09 19:13:58 +00:00
{
Try to handle recursive attempts to raise IRQL to DISPATCH_LEVEL better (among other things).
2004-04-19 22:39:04 +00:00
if (oldirql == DISPATCH_LEVEL)
return;
Begin the first phase of trying to add IRP support (and ultimately USB device support): - Convert all of my locally chosen function names to their actual Windows equivalents, where applicable. This is a big no-op change since it doesn't affect functionality, but it helps avoid a bit of confusion (it's now a lot easier to see which functions are emulated Windows API routines and which are just locally defined). - Turn ndis_buffer into an mdl, like it should have been. The structure is the same, but now it belongs to the subr_ntoskrnl module. - Implement a bunch of MDL handling macros from Windows and use them where applicable. - Correct the implementation of IoFreeMdl(). - Properly implement IoAllocateMdl() and MmBuildMdlForNonPagedPool(). - Add the definitions for struct irp and struct driver_object. - Add IMPORT_FUNC() and IMPORT_FUNC_MAP() macros to make formatting the module function tables a little cleaner. (Should also help with AMD64 support later on.) - Fix if_ndis.c to use KeRaiseIrql() and KeLowerIrql() instead of the previous calls to hal_raise_irql() and hal_lower_irql() which have been renamed. The function renaming generated a lot of churn here, but there should be very little operational effect.
2005-01-24 18:18:12 +00:00
if (KeGetCurrentIrql() != DISPATCH_LEVEL)
- Use memory barrier with atomic operations in ntoskrnl_lock_dpc() and ntoskrnl_unlocl_dpc(). - hal_raise_irql(), hal_lower_irql() and hal_irql() didn't work right on SMP (priority inheritance makes things... interesting). For now, use only two states: DISPATCH_LEVEL (PI_REALTIME) and PASSIVE_LEVEL (everything else). Tested on a dual PIII box. - Use ndis_thsuspend() in ndis_sleep() instead of tsleep(). (I added ndis_thsuspend() and ndis_thresume() to replace kthread_suspend() and kthread_resume(); the former will preserve a thread's priority when it wakes up, the latter will not.) - Change use of tsleep() in ndis_stop_thread() to prevent priority change on wakeup.
2004-04-16 00:04:28 +00:00
panic("IRQL_NOT_GREATER_THAN");
This commit makes a big round of updates and fixes many, many things. First and most importantly, I threw out the thread priority-twiddling implementation of KeRaiseIrql()/KeLowerIrq()/KeGetCurrentIrql() in favor of a new scheme that uses sleep mutexes. The old scheme was really very naughty and sought to provide the same behavior as Windows spinlocks (i.e. blocking pre-emption) but in a way that wouldn't raise the ire of WITNESS. The new scheme represents 'DISPATCH_LEVEL' as the acquisition of a per-cpu sleep mutex. If a thread on cpu0 acquires the 'dispatcher mutex,' it will block any other thread on the same processor that tries to acquire it, in effect only allowing one thread on the processor to be at 'DISPATCH_LEVEL' at any given time. It can then do the 'atomic sit and spin' routine on the spinlock variable itself. If a thread on cpu1 wants to acquire the same spinlock, it acquires the 'dispatcher mutex' for cpu1 and then it too does an atomic sit and spin to try acquiring the spinlock. Unlike real spinlocks, this does not disable pre-emption of all threads on the CPU, but it does put any threads involved with the NDISulator to sleep, which is just as good for our purposes. This means I can now play nice with WITNESS, and I can safely do things like call malloc() when I'm at 'DISPATCH_LEVEL,' which you're allowed to do in Windows. Next, I completely re-wrote most of the event/timer/mutex handling and wait code. KeWaitForSingleObject() and KeWaitForMultipleObjects() have been re-written to use condition variables instead of msleep(). This allows us to use the Windows convention whereby thread A can tell thread B "wake up with a boosted priority." (With msleep(), you instead have thread B saying "when I get woken up, I'll use this priority here," and thread A can't tell it to do otherwise.) The new KeWaitForMultipleObjects() has been better tested and better duplicates the semantics of its Windows counterpart. I also overhauled the IoQueueWorkItem() API and underlying code. Like KeInsertQueueDpc(), IoQueueWorkItem() must insure that the same work item isn't put on the queue twice. ExQueueWorkItem(), which in my implementation is built on top of IoQueueWorkItem(), was also modified to perform a similar test. I renamed the doubly-linked list macros to give them the same names as their Windows counterparts and fixed RemoveListTail() and RemoveListHead() so they properly return the removed item. I also corrected the list handling code in ntoskrnl_dpc_thread() and ntoskrnl_workitem_thread(). I realized that the original logic did not correctly handle the case where a DPC callout tries to queue up another DPC. It works correctly now. I implemented IoConnectInterrupt() and IoDisconnectInterrupt() and modified NdisMRegisterInterrupt() and NdisMDisconnectInterrupt() to use them. I also tried to duplicate the interrupt handling scheme used in Windows. The interrupt handling is now internal to ndis.ko, and the ndis_intr() function has been removed from if_ndis.c. (In the USB case, interrupt handling isn't needed in if_ndis.c anyway.) NdisMSleep() has been rewritten to use a KeWaitForSingleObject() and a KeTimer, which is how it works in Windows. (This is mainly to insure that the NDISulator uses the KeTimer API so I can spot any problems with it that may arise.) KeCancelTimer() has been changed so that it only cancels timers, and does not attempt to cancel a DPC if the timer managed to fire and queue one up before KeCancelTimer() was called. The Windows DDK documentation seems to imply that KeCantelTimer() will also call KeRemoveQueueDpc() if necessary, but it really doesn't. The KeTimer implementation has been rewritten to use the callout API directly instead of timeout()/untimeout(). I still cheat a little in that I have to manage my own small callout timer wheel, but the timer code works more smoothly now. I discovered a race condition using timeout()/untimeout() with periodic timers where untimeout() fails to actually cancel a timer. I don't quite understand where the race is, using callout_init()/callout_reset()/callout_stop() directly seems to fix it. I also discovered and fixed a bug in winx32_wrap.S related to translating _stdcall calls. There are a couple of routines (i.e. the 64-bit arithmetic intrinsics in subr_ntoskrnl) that return 64-bit quantities. On the x86 arch, 64-bit values are returned in the %eax and %edx registers. However, it happens that the ctxsw_utow() routine uses %edx as a scratch register, and x86_stdcall_wrap() and x86_stdcall_call() were only preserving %eax before branching to ctxsw_utow(). This means %edx was getting clobbered in some cases. Curiously, the most noticeable effect of this bug is that the driver for the TI AXC110 chipset would constantly drop and reacquire its link for no apparent reason. Both %eax and %edx are preserved on the stack now. The _fastcall and _regparm wrappers already handled everything correctly. I changed if_ndis to use IoAllocateWorkItem() and IoQueueWorkItem() instead of the NdisScheduleWorkItem() API. This is to avoid possible deadlocks with any drivers that use NdisScheduleWorkItem() themselves. The unicode/ansi conversion handling code has been cleaned up. The internal routines have been moved to subr_ntoskrnl and the RtlXXX routines have been exported so that subr_ndis can call them. This removes the incestuous relationship between the two modules regarding this code and fixes the implementation so that it honors the 'maxlen' fields correctly. (Previously it was possible for NdisUnicodeStringToAnsiString() to possibly clobber memory it didn't own, which was causing many mysterious crashes in the Marvell 8335 driver.) The registry handling code (NdisOpen/Close/ReadConfiguration()) has been fixed to allocate memory for all the parameters it hands out to callers and delete whem when NdisCloseConfiguration() is called. (Previously, it would secretly use a single static buffer.) I also substantially updated if_ndis so that the source can now be built on FreeBSD 7, 6 and 5 without any changes. On FreeBSD 5, only WEP support is enabled. On FreeBSD 6 and 7, WPA-PSK support is enabled. The original WPA code has been updated to fit in more cleanly with the net80211 API, and to eleminate the use of magic numbers. The ndis_80211_setstate() routine now sets a default authmode of OPEN and initializes the RTS threshold and fragmentation threshold. The WPA routines were changed so that the authentication mode is always set first, followed by the cipher. Some drivers depend on the operations being performed in this order. I also added passthrough ioctls that allow application code to directly call the MiniportSetInformation()/MiniportQueryInformation() methods via ndis_set_info() and ndis_get_info(). The ndis_linksts() routine also caches the last 4 events signalled by the driver via NdisMIndicateStatus(), and they can be queried by an application via a separate ioctl. This is done to allow wpa_supplicant to directly program the various crypto and key management options in the driver, allowing things like WPA2 support to work. Whew.
2005-10-10 16:46:39 +00:00
mtx_unlock(&disp_lock[curthread->td_oncpu]);
sched_unpin();
Add stub implementations of KfLowerIrql() and KfRaiseIrql() (both of which are _fastcall).
2004-02-09 19:13:58 +00:00
}
The latest version of the Intel 2200BG/2915ABG driver (9.0.0.3-9) from Intel's web site requires some minor tweaks to get it to work: - The driver seems to have been released with full WMI tracing enabled, and makes references to some WMI APIs, namely IoWMIRegistrationControl(), WmiQueryTraceInformation() and WmiTraceMessage(). Only the first one is ever called (during intialization). These have been implemented as do-nothing stubs for now. Also added a definition for STATUS_NOT_FOUND to ntoskrnl_var.h, which is used as a return code for one of the WMI routines. - The driver references KeRaiseIrqlToDpcLevel() and KeLowerIrql() (the latter as a function, which is unusual because normally KeLowerIrql() is a macro in the Windows DDK that calls KfLowewIrql()). I'm not sure why these are being called since they're not really part of WDM. Presumeably they're being used for backwards compatibility with old versions of Windows. These have been implemented in subr_hal.c. (Note that they're _stdcall routines instead of _fastcall.) - When querying the OID_802_11_BSSID_LIST OID to get a BSSID list, you don't know ahead of time how many networks the NIC has found during scanning, so you're allowed to pass 0 as the list length. This should cause the driver to return an 'insufficient resources' error and set the length to indicate how many bytes are actually needed. However for some reason, the Intel driver does not honor this convention: if you give it a length of 0, it returns some other error and doesn't tell you how much space is really needed. To get around this, if using a length of 0 yields anything besides the expected error case, we arbitrarily assume a length of 64K. This is similar to the hack that wpa_supplicant uses when doing a BSSID list query.
2005-11-06 19:38:34 +00:00
static uint8_t
KeRaiseIrqlToDpcLevel(void)
{
uint8_t irql;
KeRaiseIrql(DISPATCH_LEVEL, &irql);
Big style cleanup. While there remove references to FreeBSD versions older than 6.0. Submitted by: Paul B Mahol <onemda at gmail.com>
2009-11-02 11:07:42 +00:00
return (irql);
The latest version of the Intel 2200BG/2915ABG driver (9.0.0.3-9) from Intel's web site requires some minor tweaks to get it to work: - The driver seems to have been released with full WMI tracing enabled, and makes references to some WMI APIs, namely IoWMIRegistrationControl(), WmiQueryTraceInformation() and WmiTraceMessage(). Only the first one is ever called (during intialization). These have been implemented as do-nothing stubs for now. Also added a definition for STATUS_NOT_FOUND to ntoskrnl_var.h, which is used as a return code for one of the WMI routines. - The driver references KeRaiseIrqlToDpcLevel() and KeLowerIrql() (the latter as a function, which is unusual because normally KeLowerIrql() is a macro in the Windows DDK that calls KfLowewIrql()). I'm not sure why these are being called since they're not really part of WDM. Presumeably they're being used for backwards compatibility with old versions of Windows. These have been implemented in subr_hal.c. (Note that they're _stdcall routines instead of _fastcall.) - When querying the OID_802_11_BSSID_LIST OID to get a BSSID list, you don't know ahead of time how many networks the NIC has found during scanning, so you're allowed to pass 0 as the list length. This should cause the driver to return an 'insufficient resources' error and set the length to indicate how many bytes are actually needed. However for some reason, the Intel driver does not honor this convention: if you give it a length of 0, it returns some other error and doesn't tell you how much space is really needed. To get around this, if using a length of 0 yields anything besides the expected error case, we arbitrarily assume a length of 64K. This is similar to the hack that wpa_supplicant uses when doing a BSSID list query.
2005-11-06 19:38:34 +00:00
}
static void
Change the functions to ANSI in those cases where it breaks promotion to int rule. See ISO C Standard: SS6.7.5.3:15. Approved by: kib (mentor) Reviewed by: warner Tested by: silence on -current
2009-02-24 18:09:31 +00:00
_KeLowerIrql(uint8_t oldirql)
The latest version of the Intel 2200BG/2915ABG driver (9.0.0.3-9) from Intel's web site requires some minor tweaks to get it to work: - The driver seems to have been released with full WMI tracing enabled, and makes references to some WMI APIs, namely IoWMIRegistrationControl(), WmiQueryTraceInformation() and WmiTraceMessage(). Only the first one is ever called (during intialization). These have been implemented as do-nothing stubs for now. Also added a definition for STATUS_NOT_FOUND to ntoskrnl_var.h, which is used as a return code for one of the WMI routines. - The driver references KeRaiseIrqlToDpcLevel() and KeLowerIrql() (the latter as a function, which is unusual because normally KeLowerIrql() is a macro in the Windows DDK that calls KfLowewIrql()). I'm not sure why these are being called since they're not really part of WDM. Presumeably they're being used for backwards compatibility with old versions of Windows. These have been implemented in subr_hal.c. (Note that they're _stdcall routines instead of _fastcall.) - When querying the OID_802_11_BSSID_LIST OID to get a BSSID list, you don't know ahead of time how many networks the NIC has found during scanning, so you're allowed to pass 0 as the list length. This should cause the driver to return an 'insufficient resources' error and set the length to indicate how many bytes are actually needed. However for some reason, the Intel driver does not honor this convention: if you give it a length of 0, it returns some other error and doesn't tell you how much space is really needed. To get around this, if using a length of 0 yields anything besides the expected error case, we arbitrarily assume a length of 64K. This is similar to the hack that wpa_supplicant uses when doing a BSSID list query.
2005-11-06 19:38:34 +00:00
{
KeLowerIrql(oldirql);
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
static void dummy()
{
Big style cleanup. While there remove references to FreeBSD versions older than 6.0. Submitted by: Paul B Mahol <onemda at gmail.com>
2009-11-02 11:07:42 +00:00
printf("hal dummy called...\n");
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
}
image_patch_table hal_functbl[] = {
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
IMPORT_SFUNC(KeStallExecutionProcessor, 1),
IMPORT_SFUNC(WRITE_PORT_ULONG, 2),
IMPORT_SFUNC(WRITE_PORT_USHORT, 2),
IMPORT_SFUNC(WRITE_PORT_UCHAR, 2),
IMPORT_SFUNC(WRITE_PORT_BUFFER_ULONG, 3),
IMPORT_SFUNC(WRITE_PORT_BUFFER_USHORT, 3),
IMPORT_SFUNC(WRITE_PORT_BUFFER_UCHAR, 3),
IMPORT_SFUNC(READ_PORT_ULONG, 1),
IMPORT_SFUNC(READ_PORT_USHORT, 1),
IMPORT_SFUNC(READ_PORT_UCHAR, 1),
Fix support for Windows drivers that support both PCI and PCMCIA devices at the same time. Fix if_ndis_pccard.c so that it sets sc->ndis_dobj and sc->ndis_regvals. Correct IMPORT_SFUNC() macros for the READ_PORT_BUFFER_xxx() routines, which take 3 arguments, not 2. This fixes it so that the Windows driver for my Cisco Aironet 340 PCMCIA card works again. (Yes, I know the an(4) driver supports this card natively, but it's the only PCMCIA device I have with a Windows XP driver.)
2005-05-08 23:07:51 +00:00
IMPORT_SFUNC(READ_PORT_BUFFER_ULONG, 3),
IMPORT_SFUNC(READ_PORT_BUFFER_USHORT, 3),
IMPORT_SFUNC(READ_PORT_BUFFER_UCHAR, 3),
Create new i386 windows/bsd thunking layer, similar to the amd64 thunking layer, but with a twist. The twist has to do with the fact that Microsoft supports structured exception handling in kernel mode. On the i386 arch, exception handling is implemented by hanging an exception registration list off the Thread Environment Block (TEB), and the TEB is accessed via the %fs register. The problem is, we use %fs as a pointer to the pcpu stucture, which means any driver that tries to write through %fs:0 will overwrite the curthread pointer and make a serious mess of things. To get around this, Project Evil now creates a special entry in the GDT on each processor. When we call into Windows code, a context switch routine will fix up %fs so it points to our new descriptor, which in turn points to a fake TEB. When the Windows code returns, or calls out to an external routine, we swap %fs back again. Currently, Project Evil makes use of GDT slot 7, which is all 0s by default. I fully expect someone to jump up and say I can't do that, but I couldn't find any code that makes use of this entry anywhere. Sadly, this was the only method I could come up with that worked on both UP and SMP. (Modifying the LDT works on UP, but becomes incredibly complicated on SMP.) If necessary, the context switching stuff can be yanked out while preserving the convention calling wrappers. (Fortunately, it looks like Microsoft uses some special epilog/prolog code on amd64 to implement exception handling, so the same nastiness won't be necessary on that arch.) The advantages are: - Any driver that uses %fs as though it were a TEB pointer won't clobber pcpu. - All the __stdcall/__fastcall/__regparm stuff that's specific to gcc goes away. Also, while I'm here, switch NdisGetSystemUpTime() back to using nanouptime() again. It turns out nanouptime() is way more accurate than just using ticks(). On slower machines, the Atheros drivers I tested seem to take a long time to associate due to the loss in accuracy.
2005-04-11 02:02:35 +00:00
IMPORT_FFUNC(KfAcquireSpinLock, 1),
IMPORT_FFUNC(KfReleaseSpinLock, 1),
IMPORT_SFUNC(KeGetCurrentIrql, 0),
IMPORT_SFUNC(KeQueryPerformanceCounter, 1),
IMPORT_FFUNC(KfLowerIrql, 1),
IMPORT_FFUNC(KfRaiseIrql, 1),
The latest version of the Intel 2200BG/2915ABG driver (9.0.0.3-9) from Intel's web site requires some minor tweaks to get it to work: - The driver seems to have been released with full WMI tracing enabled, and makes references to some WMI APIs, namely IoWMIRegistrationControl(), WmiQueryTraceInformation() and WmiTraceMessage(). Only the first one is ever called (during intialization). These have been implemented as do-nothing stubs for now. Also added a definition for STATUS_NOT_FOUND to ntoskrnl_var.h, which is used as a return code for one of the WMI routines. - The driver references KeRaiseIrqlToDpcLevel() and KeLowerIrql() (the latter as a function, which is unusual because normally KeLowerIrql() is a macro in the Windows DDK that calls KfLowewIrql()). I'm not sure why these are being called since they're not really part of WDM. Presumeably they're being used for backwards compatibility with old versions of Windows. These have been implemented in subr_hal.c. (Note that they're _stdcall routines instead of _fastcall.) - When querying the OID_802_11_BSSID_LIST OID to get a BSSID list, you don't know ahead of time how many networks the NIC has found during scanning, so you're allowed to pass 0 as the list length. This should cause the driver to return an 'insufficient resources' error and set the length to indicate how many bytes are actually needed. However for some reason, the Intel driver does not honor this convention: if you give it a length of 0, it returns some other error and doesn't tell you how much space is really needed. To get around this, if using a length of 0 yields anything besides the expected error case, we arbitrarily assume a length of 64K. This is similar to the hack that wpa_supplicant uses when doing a BSSID list query.
2005-11-06 19:38:34 +00:00
IMPORT_SFUNC(KeRaiseIrqlToDpcLevel, 0),
#undef KeLowerIrql
IMPORT_SFUNC_MAP(KeLowerIrql, _KeLowerIrql, 1),
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
/*
* This last entry is a catch-all for any function we haven't
* implemented yet. The PE import list patching routine will
* use it for any function that doesn't have an explicit match
* in this table.
*/
This commit makes a bunch of changes, some big, some not so big. - Remove the old task threads from kern_ndis.c and reimplement them in subr_ntoskrnl.c, in order to more properly emulate the Windows DPC API. Each CPU gets its own DPC queue/thread, and each queue can have low, medium and high importance DPCs. New APIs implemented: KeSetTargetProcessorDpc(), KeSetImportanceDpc() and KeFlushQueuedDpcs(). (This is the biggest change.) - Fix a bug in NdisMInitializeTimer(): the k_dpc pointer in the nmt_timer embedded in the ndis_miniport_timer struct must be set to point to the DPC, also embedded in the struct. Failing to do this breaks dequeueing of DPCs submitted via timers, and in turn breaks cancelling timers. - Fix a bug in KeCancelTimer(): if the timer is interted in the timer queue (i.e. the timeout callback is still pending), we have to both untimeout() the timer _and_ call KeRemoveQueueDpc() to nuke the DPC that might be pending. Failing to do this breaks cancellation of periodic timers, which always appear to be inserted in the timer queue. - Make use of the nmt_nexttimer field in ndis_miniport_timer: keep a queue of pending timers and cancel them all in ndis_halt_nic(), prior to calling MiniportHalt(). Also call KeFlushQueuedDpcs() to make sure any DPCs queued by the timers have expired. - Modify NdisMAllocateSharedMemory() and NdisMFreeSharedMemory() to keep track of both the virtual and physical addresses of the shared memory buffers that get handed out. The AirGo MIMO driver appears to have a bug in it: for one of the segments is allocates, it returns the wrong virtual address. This would confuse NdisMFreeSharedMemory() and cause a crash. Why it doesn't crash Windows too I have no idea (from reading the documentation for NdisMFreeSharedMemory(), it appears to be a violation of the API). - Implement strstr(), strchr() and MmIsAddressValid(). - Implement IoAllocateWorkItem(), IoFreeWorkItem(), IoQueueWorkItem() and ExQueueWorkItem(). (This is the second biggest change.) - Make NdisScheduleWorkItem() call ExQueueWorkItem(). (Note that the ExQueueWorkItem() API is deprecated by Microsoft, but NDIS still uses it, since NdisScheduleWorkItem() is incompatible with the IoXXXWorkItem() API.) - Change if_ndis.c to use the NdisScheduleWorkItem() interface for scheduling tasks. With all these changes and fixes, the AirGo MIMO driver for the Belkin F5D8010 Pre-N card now works. Special thanks to Paul Robinson (paul dawt robinson at pwermedia dawt net) for the loan of a card for testing.
2005-05-05 03:56:09 +00:00
{ NULL, (FUNC)dummy, NULL, 0, WINDRV_WRAP_STDCALL },
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
/* End of list. */
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
{ NULL, NULL, NULL }
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
};
Reference in New Issue Copy Permalink