These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
/*
|
1994-05-25 09:21:21 +00:00
|
|
|
* Copyright (c) 1991 Regents of the University of California.
|
|
|
|
|
* All rights reserved.
|
|
|
|
|
* Copyright (c) 1994 John S. Dyson
|
|
|
|
|
* All rights reserved.
|
|
|
|
|
* Copyright (c) 1994 David Greenman
|
|
|
|
|
* All rights reserved.
|
1994-05-24 10:09:53 +00:00
|
|
|
*
|
|
|
|
|
* This code is derived from software contributed to Berkeley by
|
|
|
|
|
* The Mach Operating System project at Carnegie-Mellon University.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
|
|
|
* must display the following acknowledgement:
|
|
|
|
|
* This product includes software developed by the University of
|
|
|
|
|
* California, Berkeley and its contributors.
|
|
|
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
|
|
|
* may be used to endorse or promote products derived from this software
|
|
|
|
|
* without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
|
*
|
1994-08-02 07:55:43 +00:00
|
|
|
* from: @(#)vm_pageout.c 7.4 (Berkeley) 5/7/91
|
1994-05-24 10:09:53 +00:00
|
|
|
*
|
|
|
|
|
*
|
|
|
|
|
* Copyright (c) 1987, 1990 Carnegie-Mellon University.
|
|
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Authors: Avadis Tevanian, Jr., Michael Wayne Young
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
*
|
1994-05-24 10:09:53 +00:00
|
|
|
* Permission to use, copy, modify and distribute this software and
|
|
|
|
|
* its documentation is hereby granted, provided that both the copyright
|
|
|
|
|
* notice and this permission notice appear in all copies of the
|
|
|
|
|
* software, derivative works or modified versions, and any portions
|
|
|
|
|
* thereof, and that both notices appear in supporting documentation.
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
*
|
|
|
|
|
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
|
|
|
|
|
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
|
1994-05-24 10:09:53 +00:00
|
|
|
* FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
*
|
1994-05-24 10:09:53 +00:00
|
|
|
* Carnegie Mellon requests users of this software to return to
|
|
|
|
|
*
|
|
|
|
|
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
|
|
|
|
|
* School of Computer Science
|
|
|
|
|
* Carnegie Mellon University
|
|
|
|
|
* Pittsburgh PA 15213-3890
|
|
|
|
|
*
|
|
|
|
|
* any improvements or extensions that they make and grant Carnegie the
|
|
|
|
|
* rights to redistribute these changes.
|
1994-05-25 09:21:21 +00:00
|
|
|
*
|
1999-02-07 21:48:23 +00:00
|
|
|
* $Id: vm_pageout.c,v 1.134 1999/01/24 06:04:52 dillon Exp $
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The proverbial page-out daemon.
|
|
|
|
|
*/
|
|
|
|
|
|
1998-09-29 17:33:59 +00:00
|
|
|
#include "opt_vm.h"
|
1994-05-24 10:09:53 +00:00
|
|
|
#include <sys/param.h>
|
1994-05-25 09:21:21 +00:00
|
|
|
#include <sys/systm.h>
|
1995-03-16 18:17:34 +00:00
|
|
|
#include <sys/kernel.h>
|
1994-05-25 09:21:21 +00:00
|
|
|
#include <sys/proc.h>
|
|
|
|
|
#include <sys/resourcevar.h>
|
1995-02-14 06:14:28 +00:00
|
|
|
#include <sys/signalvar.h>
|
1995-04-09 06:03:56 +00:00
|
|
|
#include <sys/vnode.h>
|
1995-12-07 12:48:31 +00:00
|
|
|
#include <sys/vmmeter.h>
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#include <sys/sysctl.h>
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
|
#include <vm/vm.h>
|
1995-12-07 12:48:31 +00:00
|
|
|
#include <vm/vm_param.h>
|
|
|
|
|
#include <vm/vm_prot.h>
|
1997-02-10 02:22:35 +00:00
|
|
|
#include <sys/lock.h>
|
1995-12-07 12:48:31 +00:00
|
|
|
#include <vm/vm_object.h>
|
1994-05-24 10:09:53 +00:00
|
|
|
#include <vm/vm_page.h>
|
1995-12-07 12:48:31 +00:00
|
|
|
#include <vm/vm_map.h>
|
1994-05-24 10:09:53 +00:00
|
|
|
#include <vm/vm_pageout.h>
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
#include <vm/vm_pager.h>
|
1994-10-09 01:52:19 +00:00
|
|
|
#include <vm/swap_pager.h>
|
1995-12-07 12:48:31 +00:00
|
|
|
#include <vm/vm_extern.h>
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1995-08-28 09:19:25 +00:00
|
|
|
/*
|
|
|
|
|
* System initialization
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* the kernel process "vm_pageout"*/
|
|
|
|
|
static void vm_pageout __P((void));
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
static int vm_pageout_clean __P((vm_page_t));
|
1995-11-20 12:20:02 +00:00
|
|
|
static int vm_pageout_scan __P((void));
|
1996-05-31 00:38:04 +00:00
|
|
|
static int vm_pageout_free_page_calc __P((vm_size_t count));
|
1995-08-28 09:19:25 +00:00
|
|
|
struct proc *pageproc;
|
|
|
|
|
|
|
|
|
|
static struct kproc_desc page_kp = {
|
|
|
|
|
"pagedaemon",
|
|
|
|
|
vm_pageout,
|
|
|
|
|
&pageproc
|
|
|
|
|
};
|
1995-09-09 18:10:37 +00:00
|
|
|
SYSINIT_KT(pagedaemon, SI_SUB_KTHREAD_PAGE, SI_ORDER_FIRST, kproc_start, &page_kp)
|
1995-08-28 09:19:25 +00:00
|
|
|
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#if !defined(NO_SWAPPING)
|
1995-08-28 09:19:25 +00:00
|
|
|
/* the kernel process "vm_daemon"*/
|
|
|
|
|
static void vm_daemon __P((void));
|
1995-12-14 09:55:16 +00:00
|
|
|
static struct proc *vmproc;
|
1995-08-28 09:19:25 +00:00
|
|
|
|
|
|
|
|
static struct kproc_desc vm_kp = {
|
|
|
|
|
"vmdaemon",
|
|
|
|
|
vm_daemon,
|
|
|
|
|
&vmproc
|
|
|
|
|
};
|
1995-09-09 18:10:37 +00:00
|
|
|
SYSINIT_KT(vmdaemon, SI_SUB_KTHREAD_VM, SI_ORDER_FIRST, kproc_start, &vm_kp)
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#endif
|
1995-08-28 09:19:25 +00:00
|
|
|
|
|
|
|
|
|
VM level code cleanups.
1) Start using TSM.
Struct procs continue to point to upages structure, after being freed.
Struct vmspace continues to point to pte object and kva space for kstack.
u_map is now superfluous.
2) vm_map's don't need to be reference counted. They always exist either
in the kernel or in a vmspace. The vmspaces are managed by reference
counts.
3) Remove the "wired" vm_map nonsense.
4) No need to keep a cache of kernel stack kva's.
5) Get rid of strange looking ++var, and change to var++.
6) Change more data structures to use our "zone" allocator. Added
struct proc, struct vmspace and struct vnode. This saves a significant
amount of kva space and physical memory. Additionally, this enables
TSM for the zone managed memory.
7) Keep ioopt disabled for now.
8) Remove the now bogus "single use" map concept.
9) Use generation counts or id's for data structures residing in TSM, where
it allows us to avoid unneeded restart overhead during traversals, where
blocking might occur.
10) Account better for memory deficits, so the pageout daemon will be able
to make enough memory available (experimental.)
11) Fix some vnode locking problems. (From Tor, I think.)
12) Add a check in ufs_lookup, to avoid lots of unneeded calls to bcmp.
(experimental.)
13) Significantly shrink, cleanup, and make slightly faster the vm_fault.c
code. Use generation counts, get rid of unneded collpase operations,
and clean up the cluster code.
14) Make vm_zone more suitable for TSM.
This commit is partially as a result of discussions and contributions from
other people, including DG, Tor Egge, PHK, and probably others that I
have forgotten to attribute (so let me know, if I forgot.)
This is not the infamous, final cleanup of the vnode stuff, but a necessary
step. Vnode mgmt should be correct, but things might still change, and
there is still some missing stuff (like ioopt, and physical backing of
non-merged cache files, debugging of layering concepts.)
1998-01-22 17:30:44 +00:00
|
|
|
int vm_pages_needed=0; /* Event on which pageout daemon sleeps */
|
|
|
|
|
int vm_pageout_deficit=0; /* Estimated number of pages deficit */
|
|
|
|
|
int vm_pageout_pages_needed=0; /* flag saying that the pageout daemon needs pages */
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1994-05-25 09:21:21 +00:00
|
|
|
extern int npendingio;
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#if !defined(NO_SWAPPING)
|
1995-12-14 09:55:16 +00:00
|
|
|
static int vm_pageout_req_swapout; /* XXX */
|
|
|
|
|
static int vm_daemon_needed;
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#endif
|
1994-05-25 09:21:21 +00:00
|
|
|
extern int nswiodone;
|
1994-10-22 02:18:03 +00:00
|
|
|
extern int vm_swap_size;
|
1995-04-09 06:03:56 +00:00
|
|
|
extern int vfs_update_wakeup;
|
1998-02-09 06:11:36 +00:00
|
|
|
static int vm_pageout_stats_max=0, vm_pageout_stats_interval = 0;
|
|
|
|
|
static int vm_pageout_full_stats_interval = 0;
|
|
|
|
|
static int vm_pageout_stats_free_max=0, vm_pageout_algorithm_lru=0;
|
|
|
|
|
static int defer_swap_pageouts=0;
|
|
|
|
|
static int disable_swap_pageouts=0;
|
1997-12-05 05:41:06 +00:00
|
|
|
|
1998-02-09 06:11:36 +00:00
|
|
|
static int max_page_launder=100;
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#if defined(NO_SWAPPING)
|
1998-02-09 06:11:36 +00:00
|
|
|
static int vm_swap_enabled=0;
|
|
|
|
|
static int vm_swap_idle_enabled=0;
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#else
|
1998-02-09 06:11:36 +00:00
|
|
|
static int vm_swap_enabled=1;
|
|
|
|
|
static int vm_swap_idle_enabled=0;
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
SYSCTL_INT(_vm, VM_PAGEOUT_ALGORITHM, pageout_algorithm,
|
1998-10-31 17:21:31 +00:00
|
|
|
CTLFLAG_RW, &vm_pageout_algorithm_lru, 0, "LRU page mgmt");
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
|
1997-07-27 04:49:19 +00:00
|
|
|
SYSCTL_INT(_vm, OID_AUTO, pageout_stats_max,
|
1998-10-31 17:21:31 +00:00
|
|
|
CTLFLAG_RW, &vm_pageout_stats_max, 0, "Max pageout stats scan length");
|
1997-07-27 04:49:19 +00:00
|
|
|
|
|
|
|
|
SYSCTL_INT(_vm, OID_AUTO, pageout_full_stats_interval,
|
1998-10-31 17:21:31 +00:00
|
|
|
CTLFLAG_RW, &vm_pageout_full_stats_interval, 0, "Interval for full stats scan");
|
1997-07-27 04:49:19 +00:00
|
|
|
|
|
|
|
|
SYSCTL_INT(_vm, OID_AUTO, pageout_stats_interval,
|
1998-10-31 17:21:31 +00:00
|
|
|
CTLFLAG_RW, &vm_pageout_stats_interval, 0, "Interval for partial stats scan");
|
1997-07-27 04:49:19 +00:00
|
|
|
|
|
|
|
|
SYSCTL_INT(_vm, OID_AUTO, pageout_stats_free_max,
|
1998-10-31 17:21:31 +00:00
|
|
|
CTLFLAG_RW, &vm_pageout_stats_free_max, 0, "Not implemented");
|
1997-07-27 04:49:19 +00:00
|
|
|
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#if defined(NO_SWAPPING)
|
1997-12-06 02:23:36 +00:00
|
|
|
SYSCTL_INT(_vm, VM_SWAPPING_ENABLED, swap_enabled,
|
|
|
|
|
CTLFLAG_RD, &vm_swap_enabled, 0, "");
|
|
|
|
|
SYSCTL_INT(_vm, OID_AUTO, swap_idle_enabled,
|
|
|
|
|
CTLFLAG_RD, &vm_swap_idle_enabled, 0, "");
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#else
|
1997-12-06 02:23:36 +00:00
|
|
|
SYSCTL_INT(_vm, VM_SWAPPING_ENABLED, swap_enabled,
|
1998-10-31 17:21:31 +00:00
|
|
|
CTLFLAG_RW, &vm_swap_enabled, 0, "Enable entire process swapout");
|
1997-12-06 02:23:36 +00:00
|
|
|
SYSCTL_INT(_vm, OID_AUTO, swap_idle_enabled,
|
1998-10-31 17:21:31 +00:00
|
|
|
CTLFLAG_RW, &vm_swap_idle_enabled, 0, "Allow swapout on idle criteria");
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#endif
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1997-12-06 02:23:36 +00:00
|
|
|
SYSCTL_INT(_vm, OID_AUTO, defer_swapspace_pageouts,
|
1998-10-31 17:21:31 +00:00
|
|
|
CTLFLAG_RW, &defer_swap_pageouts, 0, "Give preference to dirty pages in mem");
|
1997-12-04 19:00:56 +00:00
|
|
|
|
1997-12-06 02:23:36 +00:00
|
|
|
SYSCTL_INT(_vm, OID_AUTO, disable_swapspace_pageouts,
|
1998-10-31 17:21:31 +00:00
|
|
|
CTLFLAG_RW, &disable_swap_pageouts, 0, "Disallow swapout of dirty pages");
|
1997-12-04 19:00:56 +00:00
|
|
|
|
1997-12-06 02:23:36 +00:00
|
|
|
SYSCTL_INT(_vm, OID_AUTO, max_page_launder,
|
1998-10-31 17:21:31 +00:00
|
|
|
CTLFLAG_RW, &max_page_launder, 0, "Maximum number of pages to clean per pass");
|
1997-12-05 05:41:06 +00:00
|
|
|
|
1994-05-25 09:21:21 +00:00
|
|
|
|
1998-03-01 04:18:54 +00:00
|
|
|
#define VM_PAGEOUT_PAGE_COUNT 16
|
1994-08-04 03:06:48 +00:00
|
|
|
int vm_pageout_page_count = VM_PAGEOUT_PAGE_COUNT;
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1995-04-16 12:56:22 +00:00
|
|
|
int vm_page_max_wired; /* XXX max # of wired pages system-wide */
|
1994-05-24 10:09:53 +00:00
|
|
|
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#if !defined(NO_SWAPPING)
|
|
|
|
|
typedef void freeer_fcn_t __P((vm_map_t, vm_object_t, vm_pindex_t, int));
|
|
|
|
|
static void vm_pageout_map_deactivate_pages __P((vm_map_t, vm_pindex_t));
|
1995-10-07 19:02:56 +00:00
|
|
|
static freeer_fcn_t vm_pageout_object_deactivate_pages;
|
|
|
|
|
static void vm_req_vmdaemon __P((void));
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#endif
|
1997-07-27 04:49:19 +00:00
|
|
|
static void vm_pageout_page_stats(void);
|
1997-10-25 02:41:56 +00:00
|
|
|
void pmap_collect(void);
|
1995-10-07 19:02:56 +00:00
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
1994-05-25 09:21:21 +00:00
|
|
|
* vm_pageout_clean:
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
*
|
|
|
|
|
* Clean the page and remove it from the laundry.
|
|
|
|
|
*
|
|
|
|
|
* We set the busy bit to cause potential page faults on this page to
|
1999-01-21 08:29:12 +00:00
|
|
|
* block. Note the careful timing, however, the busy bit isn't set till
|
|
|
|
|
* late and we cannot do anything that will mess with the page.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
1999-01-21 08:29:12 +00:00
|
|
|
|
1995-11-20 12:20:02 +00:00
|
|
|
static int
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
vm_pageout_clean(m)
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
vm_page_t m;
|
1994-05-24 10:09:53 +00:00
|
|
|
{
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
register vm_object_t object;
|
1996-05-31 00:38:04 +00:00
|
|
|
vm_page_t mc[2*vm_pageout_page_count];
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
int pageout_count;
|
|
|
|
|
int i, forward_okay, backward_okay, page_base;
|
1995-12-11 04:58:34 +00:00
|
|
|
vm_pindex_t pindex = m->pindex;
|
1994-05-25 09:21:21 +00:00
|
|
|
|
|
|
|
|
object = m->object;
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
|
1999-01-21 08:29:12 +00:00
|
|
|
/*
|
|
|
|
|
* It doesn't cost us anything to pageout OBJT_DEFAULT or OBJT_SWAP
|
|
|
|
|
* with the new swapper, but we could have serious problems paging
|
|
|
|
|
* out other object types if there is insufficient memory.
|
|
|
|
|
*
|
|
|
|
|
* Unfortunately, checking free memory here is far too late, so the
|
|
|
|
|
* check has been moved up a procedural level.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#if 0
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
* If not OBJT_SWAP, additional memory may be needed to do the pageout.
|
|
|
|
|
* Try to avoid the deadlock.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
if ((object->type == OBJT_DEFAULT) &&
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
((cnt.v_free_count + cnt.v_cache_count) < cnt.v_pageout_free_min))
|
1994-05-25 09:21:21 +00:00
|
|
|
return 0;
|
1999-01-21 08:29:12 +00:00
|
|
|
#endif
|
1994-05-24 10:09:53 +00:00
|
|
|
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
/*
|
|
|
|
|
* Don't mess with the page if it's busy.
|
|
|
|
|
*/
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
if ((m->hold_count != 0) ||
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
((m->busy != 0) || (m->flags & PG_BUSY)))
|
|
|
|
|
return 0;
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1999-01-21 08:29:12 +00:00
|
|
|
#if 0
|
|
|
|
|
/*
|
|
|
|
|
* XXX REMOVED XXX. vm_object_collapse() can block, which can
|
|
|
|
|
* change the page state. Calling vm_object_collapse() might also
|
|
|
|
|
* destroy or rename the page because we have not busied it yet!!!
|
|
|
|
|
* So this code segment is removed.
|
|
|
|
|
*/
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
/*
|
1999-01-21 08:29:12 +00:00
|
|
|
* Try collapsing before it's too late. XXX huh? Why are we doing
|
|
|
|
|
* this here?
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
*/
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
if (object->backing_object) {
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
vm_object_collapse(object);
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
1999-01-21 08:29:12 +00:00
|
|
|
#endif
|
1997-01-01 04:45:05 +00:00
|
|
|
|
1996-05-31 00:38:04 +00:00
|
|
|
mc[vm_pageout_page_count] = m;
|
1994-05-25 09:21:21 +00:00
|
|
|
pageout_count = 1;
|
1996-05-31 00:38:04 +00:00
|
|
|
page_base = vm_pageout_page_count;
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
forward_okay = TRUE;
|
1995-12-11 04:58:34 +00:00
|
|
|
if (pindex != 0)
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
backward_okay = TRUE;
|
|
|
|
|
else
|
|
|
|
|
backward_okay = FALSE;
|
|
|
|
|
/*
|
|
|
|
|
* Scan object for clusterable pages.
|
|
|
|
|
*
|
|
|
|
|
* We can cluster ONLY if: ->> the page is NOT
|
|
|
|
|
* clean, wired, busy, held, or mapped into a
|
|
|
|
|
* buffer, and one of the following:
|
|
|
|
|
* 1) The page is inactive, or a seldom used
|
|
|
|
|
* active page.
|
|
|
|
|
* -or-
|
|
|
|
|
* 2) we force the issue.
|
|
|
|
|
*/
|
|
|
|
|
for (i = 1; (i < vm_pageout_page_count) && (forward_okay || backward_okay); i++) {
|
|
|
|
|
vm_page_t p;
|
1995-04-09 06:03:56 +00:00
|
|
|
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
/*
|
|
|
|
|
* See if forward page is clusterable.
|
|
|
|
|
*/
|
|
|
|
|
if (forward_okay) {
|
|
|
|
|
/*
|
|
|
|
|
* Stop forward scan at end of object.
|
|
|
|
|
*/
|
1995-12-11 04:58:34 +00:00
|
|
|
if ((pindex + i) > object->size) {
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
forward_okay = FALSE;
|
|
|
|
|
goto do_backward;
|
1995-04-09 06:03:56 +00:00
|
|
|
}
|
1995-12-11 04:58:34 +00:00
|
|
|
p = vm_page_lookup(object, pindex + i);
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
if (p) {
|
1996-09-08 20:44:49 +00:00
|
|
|
if (((p->queue - p->pc) == PQ_CACHE) ||
|
|
|
|
|
(p->flags & PG_BUSY) || p->busy) {
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
forward_okay = FALSE;
|
|
|
|
|
goto do_backward;
|
1995-04-09 06:03:56 +00:00
|
|
|
}
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
vm_page_test_dirty(p);
|
|
|
|
|
if ((p->dirty & p->valid) != 0 &&
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
(p->queue == PQ_INACTIVE) &&
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
(p->wire_count == 0) &&
|
|
|
|
|
(p->hold_count == 0)) {
|
1996-05-31 00:38:04 +00:00
|
|
|
mc[vm_pageout_page_count + i] = p;
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
pageout_count++;
|
|
|
|
|
if (pageout_count == vm_pageout_page_count)
|
|
|
|
|
break;
|
|
|
|
|
} else {
|
|
|
|
|
forward_okay = FALSE;
|
1995-04-09 06:03:56 +00:00
|
|
|
}
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
} else {
|
|
|
|
|
forward_okay = FALSE;
|
1995-04-09 06:03:56 +00:00
|
|
|
}
|
|
|
|
|
}
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
do_backward:
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
/*
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
* See if backward page is clusterable.
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
*/
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
if (backward_okay) {
|
|
|
|
|
/*
|
|
|
|
|
* Stop backward scan at beginning of object.
|
|
|
|
|
*/
|
1995-12-11 04:58:34 +00:00
|
|
|
if ((pindex - i) == 0) {
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
backward_okay = FALSE;
|
|
|
|
|
}
|
1995-12-11 04:58:34 +00:00
|
|
|
p = vm_page_lookup(object, pindex - i);
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
if (p) {
|
1996-09-08 20:44:49 +00:00
|
|
|
if (((p->queue - p->pc) == PQ_CACHE) ||
|
|
|
|
|
(p->flags & PG_BUSY) || p->busy) {
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
backward_okay = FALSE;
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
vm_page_test_dirty(p);
|
|
|
|
|
if ((p->dirty & p->valid) != 0 &&
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
(p->queue == PQ_INACTIVE) &&
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
(p->wire_count == 0) &&
|
|
|
|
|
(p->hold_count == 0)) {
|
1996-05-31 00:38:04 +00:00
|
|
|
mc[vm_pageout_page_count - i] = p;
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
pageout_count++;
|
|
|
|
|
page_base--;
|
|
|
|
|
if (pageout_count == vm_pageout_page_count)
|
|
|
|
|
break;
|
|
|
|
|
} else {
|
|
|
|
|
backward_okay = FALSE;
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
backward_okay = FALSE;
|
|
|
|
|
}
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
|
|
|
|
|
1996-07-30 03:08:57 +00:00
|
|
|
/*
|
|
|
|
|
* we allow reads during pageouts...
|
|
|
|
|
*/
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
return vm_pageout_flush(&mc[page_base], pageout_count, 0);
|
1995-11-05 20:46:03 +00:00
|
|
|
}
|
|
|
|
|
|
1999-01-21 08:29:12 +00:00
|
|
|
/*
|
|
|
|
|
* vm_pageout_flush() - launder the given pages
|
|
|
|
|
*
|
|
|
|
|
* The given pages are laundered. Note that we setup for the start of
|
|
|
|
|
* I/O ( i.e. busy the page ), mark it read-only, and bump the object
|
|
|
|
|
* reference count all in here rather then in the parent. If we want
|
|
|
|
|
* the parent to do more sophisticated things we may have to change
|
|
|
|
|
* the ordering.
|
|
|
|
|
*/
|
|
|
|
|
|
1995-11-05 20:46:03 +00:00
|
|
|
int
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
vm_pageout_flush(mc, count, flags)
|
1995-11-05 20:46:03 +00:00
|
|
|
vm_page_t *mc;
|
|
|
|
|
int count;
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
int flags;
|
1995-11-05 20:46:03 +00:00
|
|
|
{
|
|
|
|
|
register vm_object_t object;
|
|
|
|
|
int pageout_status[count];
|
1998-02-05 03:32:49 +00:00
|
|
|
int numpagedout = 0;
|
1995-11-05 20:46:03 +00:00
|
|
|
int i;
|
|
|
|
|
|
1999-01-21 08:29:12 +00:00
|
|
|
/*
|
|
|
|
|
* Initiate I/O. Bump the vm_page_t->busy counter and
|
|
|
|
|
* mark the pages read-only.
|
|
|
|
|
*
|
|
|
|
|
* We do not have to fixup the clean/dirty bits here... we can
|
|
|
|
|
* allow the pager to do it after the I/O completes.
|
|
|
|
|
*/
|
|
|
|
|
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
for (i = 0; i < count; i++) {
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_io_start(mc[i]);
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
vm_page_protect(mc[i], VM_PROT_READ);
|
|
|
|
|
}
|
|
|
|
|
|
1995-11-05 20:46:03 +00:00
|
|
|
object = mc[0]->object;
|
1998-08-06 08:33:19 +00:00
|
|
|
vm_object_pip_add(object, count);
|
1995-11-05 20:46:03 +00:00
|
|
|
|
|
|
|
|
vm_pager_put_pages(object, mc, count,
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
(flags | ((object == kernel_object) ? OBJPC_SYNC : 0)),
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
pageout_status);
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1995-11-05 20:46:03 +00:00
|
|
|
for (i = 0; i < count; i++) {
|
|
|
|
|
vm_page_t mt = mc[i];
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
|
1994-05-25 09:21:21 +00:00
|
|
|
switch (pageout_status[i]) {
|
|
|
|
|
case VM_PAGER_OK:
|
1998-02-05 03:32:49 +00:00
|
|
|
numpagedout++;
|
1994-05-25 09:21:21 +00:00
|
|
|
break;
|
|
|
|
|
case VM_PAGER_PEND:
|
1998-02-05 03:32:49 +00:00
|
|
|
numpagedout++;
|
1994-05-25 09:21:21 +00:00
|
|
|
break;
|
|
|
|
|
case VM_PAGER_BAD:
|
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Page outside of range of object. Right now we
|
|
|
|
|
* essentially lose the changes by pretending it
|
|
|
|
|
* worked.
|
1994-05-25 09:21:21 +00:00
|
|
|
*/
|
1996-07-30 03:08:57 +00:00
|
|
|
pmap_clear_modify(VM_PAGE_TO_PHYS(mt));
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
mt->dirty = 0;
|
1994-05-25 09:21:21 +00:00
|
|
|
break;
|
|
|
|
|
case VM_PAGER_ERROR:
|
|
|
|
|
case VM_PAGER_FAIL:
|
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* If page couldn't be paged out, then reactivate the
|
|
|
|
|
* page so it doesn't clog the inactive list. (We
|
|
|
|
|
* will try paging out it again later).
|
1994-05-25 09:21:21 +00:00
|
|
|
*/
|
1998-01-31 11:56:53 +00:00
|
|
|
vm_page_activate(mt);
|
1994-05-25 09:21:21 +00:00
|
|
|
break;
|
|
|
|
|
case VM_PAGER_AGAIN:
|
1994-05-24 10:09:53 +00:00
|
|
|
break;
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* If the operation is still going, leave the page busy to
|
|
|
|
|
* block all other accesses. Also, leave the paging in
|
|
|
|
|
* progress indicator set so that we don't attempt an object
|
|
|
|
|
* collapse.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
1994-05-25 09:21:21 +00:00
|
|
|
if (pageout_status[i] != VM_PAGER_PEND) {
|
1995-03-01 23:30:04 +00:00
|
|
|
vm_object_pip_wakeup(object);
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_io_finish(mt);
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
1998-02-05 03:32:49 +00:00
|
|
|
return numpagedout;
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
1994-05-24 10:09:53 +00:00
|
|
|
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#if !defined(NO_SWAPPING)
|
1994-05-25 09:21:21 +00:00
|
|
|
/*
|
|
|
|
|
* vm_pageout_object_deactivate_pages
|
|
|
|
|
*
|
|
|
|
|
* deactivate enough pages to satisfy the inactive target
|
|
|
|
|
* requirements or if vm_page_proc_limit is set, then
|
|
|
|
|
* deactivate all of the pages in the object and its
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
* backing_objects.
|
1994-05-25 09:21:21 +00:00
|
|
|
*
|
|
|
|
|
* The object and map must be locked.
|
|
|
|
|
*/
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
static void
|
|
|
|
|
vm_pageout_object_deactivate_pages(map, object, desired, map_remove_only)
|
1994-05-25 09:21:21 +00:00
|
|
|
vm_map_t map;
|
|
|
|
|
vm_object_t object;
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
vm_pindex_t desired;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
int map_remove_only;
|
1994-05-25 09:21:21 +00:00
|
|
|
{
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
register vm_page_t p, next;
|
1994-05-25 09:21:21 +00:00
|
|
|
int rcount;
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
int remove_mode;
|
1996-05-24 05:19:15 +00:00
|
|
|
int s;
|
1994-05-25 09:21:21 +00:00
|
|
|
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
if (object->type == OBJT_DEVICE)
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
return;
|
1995-01-28 02:02:25 +00:00
|
|
|
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
while (object) {
|
|
|
|
|
if (vm_map_pmap(map)->pm_stats.resident_count <= desired)
|
|
|
|
|
return;
|
|
|
|
|
if (object->paging_in_progress)
|
|
|
|
|
return;
|
1994-05-25 09:21:21 +00:00
|
|
|
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
remove_mode = map_remove_only;
|
|
|
|
|
if (object->shadow_count > 1)
|
|
|
|
|
remove_mode = 1;
|
1994-05-25 09:21:21 +00:00
|
|
|
/*
|
|
|
|
|
* scan the objects entire memory queue
|
|
|
|
|
*/
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
rcount = object->resident_page_count;
|
|
|
|
|
p = TAILQ_FIRST(&object->memq);
|
|
|
|
|
while (p && (rcount-- > 0)) {
|
1997-10-06 02:48:16 +00:00
|
|
|
int actcount;
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
if (vm_map_pmap(map)->pm_stats.resident_count <= desired)
|
|
|
|
|
return;
|
|
|
|
|
next = TAILQ_NEXT(p, listq);
|
|
|
|
|
cnt.v_pdpages++;
|
|
|
|
|
if (p->wire_count != 0 ||
|
|
|
|
|
p->hold_count != 0 ||
|
|
|
|
|
p->busy != 0 ||
|
|
|
|
|
(p->flags & PG_BUSY) ||
|
|
|
|
|
!pmap_page_exists(vm_map_pmap(map), VM_PAGE_TO_PHYS(p))) {
|
|
|
|
|
p = next;
|
|
|
|
|
continue;
|
1996-06-17 03:35:40 +00:00
|
|
|
}
|
|
|
|
|
|
1997-10-06 02:48:16 +00:00
|
|
|
actcount = pmap_ts_referenced(VM_PAGE_TO_PHYS(p));
|
|
|
|
|
if (actcount) {
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_flag_set(p, PG_REFERENCED);
|
1996-07-08 02:25:53 +00:00
|
|
|
} else if (p->flags & PG_REFERENCED) {
|
1997-10-06 02:48:16 +00:00
|
|
|
actcount = 1;
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
|
|
|
|
|
if ((p->queue != PQ_ACTIVE) &&
|
|
|
|
|
(p->flags & PG_REFERENCED)) {
|
|
|
|
|
vm_page_activate(p);
|
1997-10-06 02:48:16 +00:00
|
|
|
p->act_count += actcount;
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_flag_clear(p, PG_REFERENCED);
|
1996-07-08 02:25:53 +00:00
|
|
|
} else if (p->queue == PQ_ACTIVE) {
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
if ((p->flags & PG_REFERENCED) == 0) {
|
1996-07-08 02:25:53 +00:00
|
|
|
p->act_count -= min(p->act_count, ACT_DECLINE);
|
|
|
|
|
if (!remove_mode && (vm_pageout_algorithm_lru || (p->act_count == 0))) {
|
|
|
|
|
vm_page_protect(p, VM_PROT_NONE);
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
vm_page_deactivate(p);
|
1996-07-08 02:25:53 +00:00
|
|
|
} else {
|
|
|
|
|
s = splvm();
|
|
|
|
|
TAILQ_REMOVE(&vm_page_queue_active, p, pageq);
|
|
|
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, p, pageq);
|
|
|
|
|
splx(s);
|
|
|
|
|
}
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
} else {
|
1998-01-31 11:56:53 +00:00
|
|
|
vm_page_activate(p);
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_flag_clear(p, PG_REFERENCED);
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
if (p->act_count < (ACT_MAX - ACT_ADVANCE))
|
|
|
|
|
p->act_count += ACT_ADVANCE;
|
|
|
|
|
s = splvm();
|
|
|
|
|
TAILQ_REMOVE(&vm_page_queue_active, p, pageq);
|
|
|
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, p, pageq);
|
|
|
|
|
splx(s);
|
|
|
|
|
}
|
|
|
|
|
} else if (p->queue == PQ_INACTIVE) {
|
|
|
|
|
vm_page_protect(p, VM_PROT_NONE);
|
|
|
|
|
}
|
|
|
|
|
p = next;
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
object = object->backing_object;
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
return;
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* deactivate some number of pages in a map, try to do it fairly, but
|
|
|
|
|
* that is really hard to do.
|
|
|
|
|
*/
|
1995-10-07 19:02:56 +00:00
|
|
|
static void
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
vm_pageout_map_deactivate_pages(map, desired)
|
1994-05-25 09:21:21 +00:00
|
|
|
vm_map_t map;
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
vm_pindex_t desired;
|
1994-05-25 09:21:21 +00:00
|
|
|
{
|
|
|
|
|
vm_map_entry_t tmpe;
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
vm_object_t obj, bigobj;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
|
1997-02-10 02:22:35 +00:00
|
|
|
if (lockmgr(&map->lock, LK_EXCLUSIVE | LK_NOWAIT, (void *)0, curproc)) {
|
1994-05-25 09:21:21 +00:00
|
|
|
return;
|
|
|
|
|
}
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
|
|
|
|
|
bigobj = NULL;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* first, search out the biggest object, and try to free pages from
|
|
|
|
|
* that.
|
|
|
|
|
*/
|
|
|
|
|
tmpe = map->header.next;
|
|
|
|
|
while (tmpe != &map->header) {
|
1999-02-07 21:48:23 +00:00
|
|
|
if ((tmpe->eflags & MAP_ENTRY_IS_SUB_MAP) == 0) {
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
obj = tmpe->object.vm_object;
|
|
|
|
|
if ((obj != NULL) && (obj->shadow_count <= 1) &&
|
|
|
|
|
((bigobj == NULL) ||
|
|
|
|
|
(bigobj->resident_page_count < obj->resident_page_count))) {
|
|
|
|
|
bigobj = obj;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
tmpe = tmpe->next;
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
|
|
|
|
|
if (bigobj)
|
|
|
|
|
vm_pageout_object_deactivate_pages(map, bigobj, desired, 0);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Next, hunt around for other pages to deactivate. We actually
|
|
|
|
|
* do this search sort of wrong -- .text first is not the best idea.
|
|
|
|
|
*/
|
|
|
|
|
tmpe = map->header.next;
|
|
|
|
|
while (tmpe != &map->header) {
|
|
|
|
|
if (vm_map_pmap(map)->pm_stats.resident_count <= desired)
|
|
|
|
|
break;
|
1999-02-07 21:48:23 +00:00
|
|
|
if ((tmpe->eflags & MAP_ENTRY_IS_SUB_MAP) == 0) {
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
obj = tmpe->object.vm_object;
|
1996-06-29 09:17:17 +00:00
|
|
|
if (obj)
|
|
|
|
|
vm_pageout_object_deactivate_pages(map, obj, desired, 0);
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
}
|
|
|
|
|
tmpe = tmpe->next;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Remove all mappings if a process is swapped out, this will free page
|
|
|
|
|
* table pages.
|
|
|
|
|
*/
|
|
|
|
|
if (desired == 0)
|
|
|
|
|
pmap_remove(vm_map_pmap(map),
|
|
|
|
|
VM_MIN_ADDRESS, VM_MAXUSER_ADDRESS);
|
|
|
|
|
vm_map_unlock(map);
|
1994-05-25 09:21:21 +00:00
|
|
|
return;
|
|
|
|
|
}
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#endif
|
1994-05-25 09:21:21 +00:00
|
|
|
|
1999-01-21 08:29:12 +00:00
|
|
|
/*
|
|
|
|
|
* Don't try to be fancy - being fancy can lead to VOP_LOCK's and therefore
|
|
|
|
|
* to vnode deadlocks. We only do it for OBJT_DEFAULT and OBJT_SWAP objects
|
|
|
|
|
* which we know can be trivially freed.
|
|
|
|
|
*/
|
|
|
|
|
|
1998-01-12 01:46:33 +00:00
|
|
|
void
|
|
|
|
|
vm_pageout_page_free(vm_page_t m) {
|
1999-01-21 08:29:12 +00:00
|
|
|
vm_object_t object = m->object;
|
|
|
|
|
int type = object->type;
|
1998-01-31 11:56:53 +00:00
|
|
|
|
1999-01-21 08:29:12 +00:00
|
|
|
if (type == OBJT_SWAP || type == OBJT_DEFAULT)
|
|
|
|
|
vm_object_reference(object);
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_busy(m);
|
1998-01-12 01:46:33 +00:00
|
|
|
vm_page_protect(m, VM_PROT_NONE);
|
|
|
|
|
vm_page_free(m);
|
1999-01-21 08:29:12 +00:00
|
|
|
if (type == OBJT_SWAP || type == OBJT_DEFAULT)
|
|
|
|
|
vm_object_deallocate(object);
|
1998-01-12 01:46:33 +00:00
|
|
|
}
|
|
|
|
|
|
1994-05-25 09:21:21 +00:00
|
|
|
/*
|
|
|
|
|
* vm_pageout_scan does the dirty work for the pageout daemon.
|
|
|
|
|
*/
|
1995-11-20 12:20:02 +00:00
|
|
|
static int
|
1994-05-25 09:21:21 +00:00
|
|
|
vm_pageout_scan()
|
|
|
|
|
{
|
1996-07-08 03:22:55 +00:00
|
|
|
vm_page_t m, next;
|
1999-01-21 08:29:12 +00:00
|
|
|
int page_shortage, maxscan, pcount;
|
|
|
|
|
int addl_page_shortage, addl_page_shortage_init;
|
1997-12-05 05:41:06 +00:00
|
|
|
int maxlaunder;
|
1999-01-21 08:29:12 +00:00
|
|
|
int launder_loop = 0;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
struct proc *p, *bigproc;
|
1994-10-22 02:18:03 +00:00
|
|
|
vm_offset_t size, bigsize;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
vm_object_t object;
|
|
|
|
|
int force_wakeup = 0;
|
1997-10-06 02:48:16 +00:00
|
|
|
int actcount;
|
1995-04-09 06:03:56 +00:00
|
|
|
int vnodes_skipped = 0;
|
1996-05-24 05:19:15 +00:00
|
|
|
int s;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
|
1997-10-25 02:41:56 +00:00
|
|
|
/*
|
|
|
|
|
* Do whatever cleanup that the pmap code can.
|
|
|
|
|
*/
|
|
|
|
|
pmap_collect();
|
|
|
|
|
|
1999-01-21 08:29:12 +00:00
|
|
|
addl_page_shortage_init = vm_pageout_deficit;
|
1998-02-05 03:32:49 +00:00
|
|
|
vm_pageout_deficit = 0;
|
1996-05-29 05:15:33 +00:00
|
|
|
|
1997-12-06 02:23:36 +00:00
|
|
|
if (max_page_launder == 0)
|
|
|
|
|
max_page_launder = 1;
|
1997-12-05 05:41:06 +00:00
|
|
|
|
1999-01-21 08:29:12 +00:00
|
|
|
/*
|
|
|
|
|
* Calculate the number of pages we want to either free or move
|
|
|
|
|
* to the cache.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
page_shortage = (cnt.v_free_target + cnt.v_cache_min) -
|
|
|
|
|
(cnt.v_free_count + cnt.v_cache_count);
|
|
|
|
|
page_shortage += addl_page_shortage_init;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Figure out what to do with dirty pages when they are encountered.
|
|
|
|
|
* Assume that 1/3 of the pages on the inactive list are clean. If
|
|
|
|
|
* we think we can reach our target, disable laundering (do not
|
|
|
|
|
* clean any dirty pages). If we miss the target we will loop back
|
|
|
|
|
* up and do a laundering run.
|
|
|
|
|
*/
|
1996-05-29 05:15:33 +00:00
|
|
|
|
1999-01-21 08:29:12 +00:00
|
|
|
if (cnt.v_inactive_count / 3 > page_shortage) {
|
|
|
|
|
maxlaunder = 0;
|
|
|
|
|
launder_loop = 0;
|
|
|
|
|
} else {
|
|
|
|
|
maxlaunder =
|
|
|
|
|
(cnt.v_inactive_target > max_page_launder) ?
|
|
|
|
|
max_page_launder : cnt.v_inactive_target;
|
|
|
|
|
launder_loop = 1;
|
|
|
|
|
}
|
1996-05-29 05:15:33 +00:00
|
|
|
|
1999-01-21 08:29:12 +00:00
|
|
|
/*
|
|
|
|
|
* Start scanning the inactive queue for pages we can move to the
|
|
|
|
|
* cache or free. The scan will stop when the target is reached or
|
|
|
|
|
* we have scanned the entire inactive queue.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
rescan0:
|
|
|
|
|
addl_page_shortage = addl_page_shortage_init;
|
|
|
|
|
maxscan = cnt.v_inactive_count;
|
|
|
|
|
for (
|
|
|
|
|
m = TAILQ_FIRST(&vm_page_queue_inactive);
|
|
|
|
|
m != NULL && maxscan-- > 0 && page_shortage > 0;
|
|
|
|
|
m = next
|
|
|
|
|
) {
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1994-10-18 14:59:20 +00:00
|
|
|
cnt.v_pdpages++;
|
1996-05-29 05:15:33 +00:00
|
|
|
|
1996-05-31 00:38:04 +00:00
|
|
|
if (m->queue != PQ_INACTIVE) {
|
1996-07-30 03:08:57 +00:00
|
|
|
goto rescan0;
|
1996-05-31 00:38:04 +00:00
|
|
|
}
|
1996-05-29 05:15:33 +00:00
|
|
|
|
1996-05-18 03:38:05 +00:00
|
|
|
next = TAILQ_NEXT(m, pageq);
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1996-05-29 05:15:33 +00:00
|
|
|
if (m->hold_count) {
|
1996-05-31 00:38:04 +00:00
|
|
|
s = splvm();
|
1996-05-29 05:15:33 +00:00
|
|
|
TAILQ_REMOVE(&vm_page_queue_inactive, m, pageq);
|
|
|
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_inactive, m, pageq);
|
1996-05-31 00:38:04 +00:00
|
|
|
splx(s);
|
1996-05-29 05:15:33 +00:00
|
|
|
addl_page_shortage++;
|
|
|
|
|
continue;
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
1996-05-18 03:38:05 +00:00
|
|
|
* Dont mess with busy pages, keep in the front of the
|
|
|
|
|
* queue, most likely are being paged out.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
1996-01-19 04:00:31 +00:00
|
|
|
if (m->busy || (m->flags & PG_BUSY)) {
|
1996-05-29 05:15:33 +00:00
|
|
|
addl_page_shortage++;
|
1994-05-25 09:21:21 +00:00
|
|
|
continue;
|
|
|
|
|
}
|
1996-01-19 04:00:31 +00:00
|
|
|
|
1997-10-06 02:48:16 +00:00
|
|
|
/*
|
1999-01-21 08:29:12 +00:00
|
|
|
* If the object is not being used, we ignore previous
|
|
|
|
|
* references.
|
1997-10-06 02:48:16 +00:00
|
|
|
*/
|
1996-07-30 03:08:57 +00:00
|
|
|
if (m->object->ref_count == 0) {
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_flag_clear(m, PG_REFERENCED);
|
1996-07-30 03:08:57 +00:00
|
|
|
pmap_clear_reference(VM_PAGE_TO_PHYS(m));
|
1997-10-06 02:48:16 +00:00
|
|
|
|
|
|
|
|
/*
|
1999-01-21 08:29:12 +00:00
|
|
|
* Otherwise, if the page has been referenced while in the
|
|
|
|
|
* inactive queue, we bump the "activation count" upwards,
|
|
|
|
|
* making it less likely that the page will be added back to
|
|
|
|
|
* the inactive queue prematurely again. Here we check the
|
|
|
|
|
* page tables (or emulated bits, if any), given the upper
|
|
|
|
|
* level VM system not knowing anything about existing
|
|
|
|
|
* references.
|
1997-10-06 02:48:16 +00:00
|
|
|
*/
|
1996-07-30 03:08:57 +00:00
|
|
|
} else if (((m->flags & PG_REFERENCED) == 0) &&
|
1997-10-06 02:48:16 +00:00
|
|
|
(actcount = pmap_ts_referenced(VM_PAGE_TO_PHYS(m)))) {
|
1996-07-30 03:08:57 +00:00
|
|
|
vm_page_activate(m);
|
1997-10-06 02:48:16 +00:00
|
|
|
m->act_count += (actcount + ACT_ADVANCE);
|
1996-07-30 03:08:57 +00:00
|
|
|
continue;
|
|
|
|
|
}
|
1994-11-06 05:07:53 +00:00
|
|
|
|
1997-10-06 02:48:16 +00:00
|
|
|
/*
|
1999-01-21 08:29:12 +00:00
|
|
|
* If the upper level VM system knows about any page
|
|
|
|
|
* references, we activate the page. We also set the
|
|
|
|
|
* "activation count" higher than normal so that we will less
|
|
|
|
|
* likely place pages back onto the inactive queue again.
|
1997-10-06 02:48:16 +00:00
|
|
|
*/
|
1996-07-30 03:08:57 +00:00
|
|
|
if ((m->flags & PG_REFERENCED) != 0) {
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_flag_clear(m, PG_REFERENCED);
|
1997-10-06 02:48:16 +00:00
|
|
|
actcount = pmap_ts_referenced(VM_PAGE_TO_PHYS(m));
|
1996-07-30 03:08:57 +00:00
|
|
|
vm_page_activate(m);
|
1997-10-06 02:48:16 +00:00
|
|
|
m->act_count += (actcount + ACT_ADVANCE + 1);
|
1996-07-30 03:08:57 +00:00
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
|
1997-10-06 02:48:16 +00:00
|
|
|
/*
|
1999-01-21 08:29:12 +00:00
|
|
|
* If the upper level VM system doesn't know anything about
|
|
|
|
|
* the page being dirty, we have to check for it again. As
|
|
|
|
|
* far as the VM code knows, any partially dirty pages are
|
|
|
|
|
* fully dirty.
|
1997-10-06 02:48:16 +00:00
|
|
|
*/
|
1996-07-30 03:08:57 +00:00
|
|
|
if (m->dirty == 0) {
|
|
|
|
|
vm_page_test_dirty(m);
|
1998-07-10 17:58:35 +00:00
|
|
|
} else {
|
1999-01-24 06:04:52 +00:00
|
|
|
vm_page_dirty(m);
|
1996-07-30 03:08:57 +00:00
|
|
|
}
|
1996-06-17 03:35:40 +00:00
|
|
|
|
1997-10-06 02:48:16 +00:00
|
|
|
/*
|
|
|
|
|
* Invalid pages can be easily freed
|
|
|
|
|
*/
|
1996-01-19 04:00:31 +00:00
|
|
|
if (m->valid == 0) {
|
1998-01-12 01:46:33 +00:00
|
|
|
vm_pageout_page_free(m);
|
1996-07-30 03:08:57 +00:00
|
|
|
cnt.v_dfree++;
|
1999-01-21 08:29:12 +00:00
|
|
|
--page_shortage;
|
1997-10-06 02:48:16 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Clean pages can be placed onto the cache queue.
|
|
|
|
|
*/
|
1996-01-19 04:00:31 +00:00
|
|
|
} else if (m->dirty == 0) {
|
|
|
|
|
vm_page_cache(m);
|
1999-01-21 08:29:12 +00:00
|
|
|
--page_shortage;
|
1997-10-06 02:48:16 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Dirty pages need to be paged out. Note that we clean
|
|
|
|
|
* only a limited number of pages per pagedaemon pass.
|
|
|
|
|
*/
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
} else if (maxlaunder > 0) {
|
1994-05-25 09:21:21 +00:00
|
|
|
int written;
|
1997-12-04 19:00:56 +00:00
|
|
|
int swap_pageouts_ok;
|
1995-04-09 06:03:56 +00:00
|
|
|
struct vnode *vp = NULL;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
|
|
|
|
|
object = m->object;
|
1997-10-06 02:48:16 +00:00
|
|
|
|
1997-12-04 19:00:56 +00:00
|
|
|
if ((object->type != OBJT_SWAP) && (object->type != OBJT_DEFAULT)) {
|
|
|
|
|
swap_pageouts_ok = 1;
|
|
|
|
|
} else {
|
|
|
|
|
swap_pageouts_ok = !(defer_swap_pageouts || disable_swap_pageouts);
|
|
|
|
|
swap_pageouts_ok |= (!disable_swap_pageouts && defer_swap_pageouts &&
|
|
|
|
|
(cnt.v_free_count + cnt.v_cache_count) < cnt.v_free_min);
|
|
|
|
|
|
|
|
|
|
}
|
1997-12-05 05:41:06 +00:00
|
|
|
|
|
|
|
|
/*
|
1999-01-21 08:29:12 +00:00
|
|
|
* We don't bother paging objects that are "dead".
|
|
|
|
|
* Those objects are in a "rundown" state.
|
1997-12-05 05:41:06 +00:00
|
|
|
*/
|
|
|
|
|
if (!swap_pageouts_ok || (object->flags & OBJ_DEAD)) {
|
1997-12-04 19:00:56 +00:00
|
|
|
s = splvm();
|
|
|
|
|
TAILQ_REMOVE(&vm_page_queue_inactive, m, pageq);
|
|
|
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_inactive, m, pageq);
|
|
|
|
|
splx(s);
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
|
1999-01-21 08:29:12 +00:00
|
|
|
/*
|
|
|
|
|
* For now we protect against potential memory
|
|
|
|
|
* deadlocks by requiring significant memory to be
|
|
|
|
|
* free if the object is not OBJT_DEFAULT or OBJT_SWAP.
|
|
|
|
|
* We do not 'trust' any other object type to operate
|
|
|
|
|
* with low memory, not even OBJT_DEVICE. The VM
|
|
|
|
|
* allocator will special case allocations done by
|
|
|
|
|
* the pageout daemon so the check below actually
|
|
|
|
|
* does have some hysteresis in it. It isn't the best
|
|
|
|
|
* solution, though.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
if (
|
|
|
|
|
object->type != OBJT_DEFAULT &&
|
|
|
|
|
object->type != OBJT_SWAP &&
|
|
|
|
|
cnt.v_free_count < cnt.v_free_reserved
|
|
|
|
|
) {
|
|
|
|
|
s = splvm();
|
|
|
|
|
TAILQ_REMOVE(&vm_page_queue_inactive, m, pageq);
|
|
|
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_inactive, m, pageq);
|
|
|
|
|
splx(s);
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Presumably we have sufficient free memory to do
|
|
|
|
|
* the more sophisticated checks and locking required
|
|
|
|
|
* for vnodes.
|
|
|
|
|
*
|
|
|
|
|
* The object is already known NOT to be dead. The
|
|
|
|
|
* vget() may still block, though, because
|
|
|
|
|
* VOP_ISLOCKED() doesn't check to see if an inode
|
|
|
|
|
* (v_data) is associated with the vnode. If it isn't,
|
|
|
|
|
* vget() will load in it from disk. Worse, vget()
|
|
|
|
|
* may actually get stuck waiting on "inode" if another
|
|
|
|
|
* process is in the process of bringing the inode in.
|
|
|
|
|
* This is bad news for us either way.
|
|
|
|
|
*
|
|
|
|
|
* So for the moment we check v_data == NULL as a
|
|
|
|
|
* workaround. This means that vnodes which do not
|
|
|
|
|
* use v_data in the way we expect probably will not
|
|
|
|
|
* wind up being paged out by the pager and it will be
|
|
|
|
|
* up to the syncer to get them. That's better then
|
|
|
|
|
* us blocking here.
|
|
|
|
|
*
|
|
|
|
|
* This whole code section is bogus - we need to fix
|
|
|
|
|
* the vnode pager to handle vm_page_t's without us
|
|
|
|
|
* having to do any sophisticated VOP tests.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
if (object->type == OBJT_VNODE) {
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
vp = object->handle;
|
1999-01-21 08:29:12 +00:00
|
|
|
|
1997-02-10 02:22:35 +00:00
|
|
|
if (VOP_ISLOCKED(vp) ||
|
1999-01-21 08:29:12 +00:00
|
|
|
vp->v_data == NULL ||
|
1998-01-17 09:17:02 +00:00
|
|
|
vget(vp, LK_EXCLUSIVE|LK_NOOBJ, curproc)) {
|
1996-05-29 05:15:33 +00:00
|
|
|
if ((m->queue == PQ_INACTIVE) &&
|
|
|
|
|
(m->hold_count == 0) &&
|
|
|
|
|
(m->busy == 0) &&
|
|
|
|
|
(m->flags & PG_BUSY) == 0) {
|
1996-05-31 00:38:04 +00:00
|
|
|
s = splvm();
|
1996-05-26 07:52:09 +00:00
|
|
|
TAILQ_REMOVE(&vm_page_queue_inactive, m, pageq);
|
|
|
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_inactive, m, pageq);
|
1996-05-31 00:38:04 +00:00
|
|
|
splx(s);
|
1996-05-26 07:52:09 +00:00
|
|
|
}
|
1995-11-05 20:46:03 +00:00
|
|
|
if (object->flags & OBJ_MIGHTBEDIRTY)
|
1998-01-12 01:46:33 +00:00
|
|
|
vnodes_skipped++;
|
1996-05-29 05:15:33 +00:00
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
|
1996-05-31 00:38:04 +00:00
|
|
|
/*
|
|
|
|
|
* The page might have been moved to another queue
|
|
|
|
|
* during potential blocking in vget() above.
|
|
|
|
|
*/
|
1996-05-29 05:15:33 +00:00
|
|
|
if (m->queue != PQ_INACTIVE) {
|
|
|
|
|
if (object->flags & OBJ_MIGHTBEDIRTY)
|
1998-01-12 01:46:33 +00:00
|
|
|
vnodes_skipped++;
|
1996-05-29 05:15:33 +00:00
|
|
|
vput(vp);
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
|
1996-05-31 00:38:04 +00:00
|
|
|
/*
|
|
|
|
|
* The page may have been busied during the blocking in
|
|
|
|
|
* vput(); We don't move the page back onto the end of
|
|
|
|
|
* the queue so that statistics are more correct if we don't.
|
|
|
|
|
*/
|
1996-05-29 05:15:33 +00:00
|
|
|
if (m->busy || (m->flags & PG_BUSY)) {
|
|
|
|
|
vput(vp);
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
|
1996-05-31 00:38:04 +00:00
|
|
|
/*
|
|
|
|
|
* If the page has become held, then skip it
|
|
|
|
|
*/
|
1996-05-29 05:15:33 +00:00
|
|
|
if (m->hold_count) {
|
1996-05-31 00:38:04 +00:00
|
|
|
s = splvm();
|
1996-05-29 05:15:33 +00:00
|
|
|
TAILQ_REMOVE(&vm_page_queue_inactive, m, pageq);
|
|
|
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_inactive, m, pageq);
|
1996-05-31 00:38:04 +00:00
|
|
|
splx(s);
|
1996-05-29 05:15:33 +00:00
|
|
|
if (object->flags & OBJ_MIGHTBEDIRTY)
|
1998-01-12 01:46:33 +00:00
|
|
|
vnodes_skipped++;
|
1996-05-29 05:15:33 +00:00
|
|
|
vput(vp);
|
1995-04-09 06:03:56 +00:00
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
1994-05-25 09:21:21 +00:00
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* If a page is dirty, then it is either being washed
|
|
|
|
|
* (but not yet cleaned) or it is still in the
|
|
|
|
|
* laundry. If it is still in the laundry, then we
|
|
|
|
|
* start the cleaning operation.
|
1994-05-25 09:21:21 +00:00
|
|
|
*/
|
This mega-commit is meant to fix numerous interrelated problems. There
has been some bitrot and incorrect assumptions in the vfs_bio code. These
problems have manifest themselves worse on NFS type filesystems, but can
still affect local filesystems under certain circumstances. Most of
the problems have involved mmap consistancy, and as a side-effect broke
the vfs.ioopt code. This code might have been committed seperately, but
almost everything is interrelated.
1) Allow (pmap_object_init_pt) prefaulting of buffer-busy pages that
are fully valid.
2) Rather than deactivating erroneously read initial (header) pages in
kern_exec, we now free them.
3) Fix the rundown of non-VMIO buffers that are in an inconsistent
(missing vp) state.
4) Fix the disassociation of pages from buffers in brelse. The previous
code had rotted and was faulty in a couple of important circumstances.
5) Remove a gratuitious buffer wakeup in vfs_vmio_release.
6) Remove a crufty and currently unused cluster mechanism for VBLK
files in vfs_bio_awrite. When the code is functional, I'll add back
a cleaner version.
7) The page busy count wakeups assocated with the buffer cache usage were
incorrectly cleaned up in a previous commit by me. Revert to the
original, correct version, but with a cleaner implementation.
8) The cluster read code now tries to keep data associated with buffers
more aggressively (without breaking the heuristics) when it is presumed
that the read data (buffers) will be soon needed.
9) Change to filesystem lockmgr locks so that they use LK_NOPAUSE. The
delay loop waiting is not useful for filesystem locks, due to the
length of the time intervals.
10) Correct and clean-up spec_getpages.
11) Implement a fully functional nfs_getpages, nfs_putpages.
12) Fix nfs_write so that modifications are coherent with the NFS data on
the server disk (at least as well as NFS seems to allow.)
13) Properly support MS_INVALIDATE on NFS.
14) Properly pass down MS_INVALIDATE to lower levels of the VM code from
vm_map_clean.
15) Better support the notion of pages being busy but valid, so that
fewer in-transit waits occur. (use p->busy more for pageouts instead
of PG_BUSY.) Since the page is fully valid, it is still usable for
reads.
16) It is possible (in error) for cached pages to be busy. Make the
page allocation code handle that case correctly. (It should probably
be a printf or panic, but I want the system to handle coding errors
robustly. I'll probably add a printf.)
17) Correct the design and usage of vm_page_sleep. It didn't handle
consistancy problems very well, so make the design a little less
lofty. After vm_page_sleep, if it ever blocked, it is still important
to relookup the page (if the object generation count changed), and
verify it's status (always.)
18) In vm_pageout.c, vm_pageout_clean had rotted, so clean that up.
19) Push the page busy for writes and VM_PROT_READ into vm_pageout_flush.
20) Fix vm_pager_put_pages and it's descendents to support an int flag
instead of a boolean, so that we can pass down the invalidate bit.
1998-03-07 21:37:31 +00:00
|
|
|
written = vm_pageout_clean(m);
|
1995-04-09 06:03:56 +00:00
|
|
|
if (vp)
|
|
|
|
|
vput(vp);
|
|
|
|
|
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
maxlaunder -= written;
|
|
|
|
|
}
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
1994-05-24 10:09:53 +00:00
|
|
|
|
|
|
|
|
/*
|
1999-01-21 08:29:12 +00:00
|
|
|
* If we still have a page shortage and we didn't launder anything,
|
|
|
|
|
* run the inactive scan again and launder something this time.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
if (launder_loop == 0 && page_shortage > 0) {
|
|
|
|
|
launder_loop = 1;
|
|
|
|
|
maxlaunder =
|
|
|
|
|
(cnt.v_inactive_target > max_page_launder) ?
|
|
|
|
|
max_page_launder : cnt.v_inactive_target;
|
|
|
|
|
goto rescan0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Compute the page shortage from the point of view of having to
|
|
|
|
|
* move pages from the active queue to the inactive queue.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
1999-01-21 08:29:12 +00:00
|
|
|
|
1996-05-29 05:15:33 +00:00
|
|
|
page_shortage = (cnt.v_inactive_target + cnt.v_cache_min) -
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
(cnt.v_free_count + cnt.v_inactive_count + cnt.v_cache_count);
|
Some VM improvements, including elimination of alot of Sig-11
problems. Tor Egge and others have helped with various VM bugs
lately, but don't blame him -- blame me!!!
pmap.c:
1) Create an object for kernel page table allocations. This
fixes a bogus allocation method previously used for such, by
grabbing pages from the kernel object, using bogus pindexes.
(This was a code cleanup, and perhaps a minor system stability
issue.)
pmap.c:
2) Pre-set the modify and accessed bits when prudent. This will
decrease bus traffic under certain circumstances.
vfs_bio.c, vfs_cluster.c:
3) Rather than calculating the beginning virtual byte offset
multiple times, stick the offset into the buffer header, so
that the calculated offset can be reused. (Long long multiplies
are often expensive, and this is a probably unmeasurable performance
improvement, and code cleanup.)
vfs_bio.c:
4) Handle write recursion more intelligently (but not perfectly) so
that it is less likely to cause a system panic, and is also
much more robust.
vfs_bio.c:
5) getblk incorrectly wrote out blocks that are incorrectly sized.
The problem is fixed, and writes blocks out ONLY when B_DELWRI
is true.
vfs_bio.c:
6) Check that already constituted buffers have fully valid pages. If
not, then make sure that the B_CACHE bit is not set. (This was
a major source of Sig-11 type problems.)
vfs_bio.c:
7) Fix a potential system deadlock due to an incorrectly specified
sleep priority while waiting for a buffer write operation. The
change that I made opens the system up to serious problems, and
we need to examine the issue of process sleep priorities.
vfs_cluster.c, vfs_bio.c:
8) Make clustered reads work more correctly (and more completely)
when buffers are already constituted, but not fully valid.
(This was another system reliability issue.)
vfs_subr.c, ffs_inode.c:
9) Create a vtruncbuf function, which is used by filesystems that
can truncate files. The vinvalbuf forced a file sync type operation,
while vtruncbuf only invalidates the buffers past the new end of file,
and also invalidates the appropriate pages. (This was a system reliabiliy
and performance issue.)
10) Modify FFS to use vtruncbuf.
vm_object.c:
11) Make the object rundown mechanism for OBJT_VNODE type objects work
more correctly. Included in that fix, create pager entries for
the OBJT_DEAD pager type, so that paging requests that might slip
in during race conditions are properly handled. (This was a system
reliability issue.)
vm_page.c:
12) Make some of the page validation routines be a little less picky
about arguments passed to them. Also, support page invalidation
change the object generation count so that we handle generation
counts a little more robustly.
vm_pageout.c:
13) Further reduce pageout daemon activity when the system doesn't
need help from it. There should be no additional performance
decrease even when the pageout daemon is running. (This was
a significant performance issue.)
vnode_pager.c:
14) Teach the vnode pager to handle race conditions during vnode
deallocations.
1998-03-16 01:56:03 +00:00
|
|
|
page_shortage += addl_page_shortage;
|
1999-01-21 08:29:12 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Scan the active queue for things we can deactivate
|
|
|
|
|
*/
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1996-05-18 03:38:05 +00:00
|
|
|
pcount = cnt.v_active_count;
|
|
|
|
|
m = TAILQ_FIRST(&vm_page_queue_active);
|
1999-01-21 08:29:12 +00:00
|
|
|
|
1996-05-18 03:38:05 +00:00
|
|
|
while ((m != NULL) && (pcount-- > 0) && (page_shortage > 0)) {
|
1996-05-31 00:38:04 +00:00
|
|
|
|
1997-10-06 02:48:16 +00:00
|
|
|
/*
|
|
|
|
|
* This is a consistancy check, and should likely be a panic
|
|
|
|
|
* or warning.
|
|
|
|
|
*/
|
1996-05-31 00:38:04 +00:00
|
|
|
if (m->queue != PQ_ACTIVE) {
|
1996-07-08 03:22:55 +00:00
|
|
|
break;
|
1996-05-31 00:38:04 +00:00
|
|
|
}
|
|
|
|
|
|
1996-05-18 03:38:05 +00:00
|
|
|
next = TAILQ_NEXT(m, pageq);
|
1994-05-25 09:21:21 +00:00
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Don't deactivate pages that are busy.
|
1994-05-25 09:21:21 +00:00
|
|
|
*/
|
1994-09-06 11:28:46 +00:00
|
|
|
if ((m->busy != 0) ||
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
(m->flags & PG_BUSY) ||
|
1995-04-09 06:03:56 +00:00
|
|
|
(m->hold_count != 0)) {
|
1996-05-31 00:38:04 +00:00
|
|
|
s = splvm();
|
1995-01-24 10:14:09 +00:00
|
|
|
TAILQ_REMOVE(&vm_page_queue_active, m, pageq);
|
|
|
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, m, pageq);
|
1996-05-31 00:38:04 +00:00
|
|
|
splx(s);
|
1994-05-25 09:21:21 +00:00
|
|
|
m = next;
|
|
|
|
|
continue;
|
|
|
|
|
}
|
1996-05-18 03:38:05 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The count for pagedaemon pages is done after checking the
|
|
|
|
|
* page for eligbility...
|
|
|
|
|
*/
|
|
|
|
|
cnt.v_pdpages++;
|
1996-06-17 03:35:40 +00:00
|
|
|
|
1997-10-06 02:48:16 +00:00
|
|
|
/*
|
|
|
|
|
* Check to see "how much" the page has been used.
|
|
|
|
|
*/
|
|
|
|
|
actcount = 0;
|
1996-06-17 03:35:40 +00:00
|
|
|
if (m->object->ref_count != 0) {
|
|
|
|
|
if (m->flags & PG_REFERENCED) {
|
1997-10-06 02:48:16 +00:00
|
|
|
actcount += 1;
|
1996-05-18 03:38:05 +00:00
|
|
|
}
|
1997-10-06 02:48:16 +00:00
|
|
|
actcount += pmap_ts_referenced(VM_PAGE_TO_PHYS(m));
|
|
|
|
|
if (actcount) {
|
|
|
|
|
m->act_count += ACT_ADVANCE + actcount;
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
if (m->act_count > ACT_MAX)
|
|
|
|
|
m->act_count = ACT_MAX;
|
|
|
|
|
}
|
1996-05-18 03:38:05 +00:00
|
|
|
}
|
1996-06-17 03:35:40 +00:00
|
|
|
|
1997-10-06 02:48:16 +00:00
|
|
|
/*
|
|
|
|
|
* Since we have "tested" this bit, we need to clear it now.
|
|
|
|
|
*/
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_flag_clear(m, PG_REFERENCED);
|
1996-06-17 03:35:40 +00:00
|
|
|
|
1997-10-06 02:48:16 +00:00
|
|
|
/*
|
|
|
|
|
* Only if an object is currently being used, do we use the
|
|
|
|
|
* page activation count stats.
|
|
|
|
|
*/
|
|
|
|
|
if (actcount && (m->object->ref_count != 0)) {
|
1996-05-31 00:38:04 +00:00
|
|
|
s = splvm();
|
1994-05-25 09:21:21 +00:00
|
|
|
TAILQ_REMOVE(&vm_page_queue_active, m, pageq);
|
|
|
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, m, pageq);
|
1996-05-31 00:38:04 +00:00
|
|
|
splx(s);
|
1994-05-25 09:21:21 +00:00
|
|
|
} else {
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
m->act_count -= min(m->act_count, ACT_DECLINE);
|
|
|
|
|
if (vm_pageout_algorithm_lru ||
|
|
|
|
|
(m->object->ref_count == 0) || (m->act_count == 0)) {
|
1998-01-12 01:46:33 +00:00
|
|
|
page_shortage--;
|
1997-01-11 07:22:24 +00:00
|
|
|
if (m->object->ref_count == 0) {
|
|
|
|
|
vm_page_protect(m, VM_PROT_NONE);
|
|
|
|
|
if (m->dirty == 0)
|
|
|
|
|
vm_page_cache(m);
|
|
|
|
|
else
|
|
|
|
|
vm_page_deactivate(m);
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
} else {
|
|
|
|
|
vm_page_deactivate(m);
|
|
|
|
|
}
|
1996-06-17 03:35:40 +00:00
|
|
|
} else {
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
s = splvm();
|
|
|
|
|
TAILQ_REMOVE(&vm_page_queue_active, m, pageq);
|
|
|
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, m, pageq);
|
|
|
|
|
splx(s);
|
1994-05-25 09:21:21 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
m = next;
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
1996-05-31 00:38:04 +00:00
|
|
|
|
|
|
|
|
s = splvm();
|
1999-01-21 08:29:12 +00:00
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* We try to maintain some *really* free pages, this allows interrupt
|
1999-01-21 08:29:12 +00:00
|
|
|
* code to be guaranteed space. Since both cache and free queues
|
|
|
|
|
* are considered basically 'free', moving pages from cache to free
|
|
|
|
|
* does not effect other calculations.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
1999-01-21 08:29:12 +00:00
|
|
|
|
1995-02-02 09:09:15 +00:00
|
|
|
while (cnt.v_free_count < cnt.v_free_reserved) {
|
1996-09-08 20:44:49 +00:00
|
|
|
static int cache_rover = 0;
|
|
|
|
|
m = vm_page_list_find(PQ_CACHE, cache_rover);
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
if (!m)
|
|
|
|
|
break;
|
1999-01-24 01:06:31 +00:00
|
|
|
if ((m->flags & PG_BUSY) || m->busy || m->hold_count || m->wire_count) {
|
1999-01-24 01:33:22 +00:00
|
|
|
#ifdef INVARIANTS
|
|
|
|
|
printf("Warning: busy page %p found in cache\n", m);
|
|
|
|
|
#endif
|
1999-01-24 01:06:31 +00:00
|
|
|
vm_page_deactivate(m);
|
|
|
|
|
continue;
|
|
|
|
|
}
|
1996-09-08 20:44:49 +00:00
|
|
|
cache_rover = (cache_rover + PQ_PRIME2) & PQ_L2_MASK;
|
1998-01-12 01:46:33 +00:00
|
|
|
vm_pageout_page_free(m);
|
1995-03-28 05:35:29 +00:00
|
|
|
cnt.v_dfree++;
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
1996-05-31 00:38:04 +00:00
|
|
|
splx(s);
|
1994-10-22 02:18:03 +00:00
|
|
|
|
1997-12-06 02:23:36 +00:00
|
|
|
#if !defined(NO_SWAPPING)
|
|
|
|
|
/*
|
|
|
|
|
* Idle process swapout -- run once per second.
|
|
|
|
|
*/
|
|
|
|
|
if (vm_swap_idle_enabled) {
|
|
|
|
|
static long lsec;
|
1998-03-30 09:56:58 +00:00
|
|
|
if (time_second != lsec) {
|
1997-12-06 02:23:36 +00:00
|
|
|
vm_pageout_req_swapout |= VM_SWAP_IDLE;
|
|
|
|
|
vm_req_vmdaemon();
|
1998-03-30 09:56:58 +00:00
|
|
|
lsec = time_second;
|
1997-12-06 02:23:36 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
1995-04-09 06:03:56 +00:00
|
|
|
/*
|
|
|
|
|
* If we didn't get enough free pages, and we have skipped a vnode
|
1995-04-17 10:00:55 +00:00
|
|
|
* in a writeable object, wakeup the sync daemon. And kick swapout
|
|
|
|
|
* if we did not get enough free pages.
|
1995-04-09 06:03:56 +00:00
|
|
|
*/
|
1996-01-19 04:00:31 +00:00
|
|
|
if ((cnt.v_cache_count + cnt.v_free_count) <
|
|
|
|
|
(cnt.v_free_target + cnt.v_cache_min) ) {
|
1995-04-17 10:00:55 +00:00
|
|
|
if (vnodes_skipped &&
|
|
|
|
|
(cnt.v_cache_count + cnt.v_free_count) < cnt.v_free_min) {
|
|
|
|
|
if (!vfs_update_wakeup) {
|
|
|
|
|
vfs_update_wakeup = 1;
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
wakeup(&vfs_update_wakeup);
|
1995-04-17 10:00:55 +00:00
|
|
|
}
|
|
|
|
|
}
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#if !defined(NO_SWAPPING)
|
1997-12-06 02:23:36 +00:00
|
|
|
if (vm_swap_enabled &&
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
(cnt.v_free_count + cnt.v_cache_count < cnt.v_free_target)) {
|
1995-04-17 10:00:55 +00:00
|
|
|
vm_req_vmdaemon();
|
1997-12-06 02:23:36 +00:00
|
|
|
vm_pageout_req_swapout |= VM_SWAP_NORMAL;
|
1995-04-09 06:03:56 +00:00
|
|
|
}
|
1996-02-22 10:57:37 +00:00
|
|
|
#endif
|
1995-04-09 06:03:56 +00:00
|
|
|
}
|
|
|
|
|
|
1994-10-22 02:18:03 +00:00
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* make sure that we have swap space -- if we are low on memory and
|
|
|
|
|
* swap -- then kill the biggest process.
|
1994-10-22 02:18:03 +00:00
|
|
|
*/
|
|
|
|
|
if ((vm_swap_size == 0 || swap_pager_full) &&
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
((cnt.v_free_count + cnt.v_cache_count) < cnt.v_free_min)) {
|
1994-10-22 02:18:03 +00:00
|
|
|
bigproc = NULL;
|
|
|
|
|
bigsize = 0;
|
1996-03-11 06:11:43 +00:00
|
|
|
for (p = allproc.lh_first; p != 0; p = p->p_list.le_next) {
|
1994-10-22 02:18:03 +00:00
|
|
|
/*
|
|
|
|
|
* if this is a system process, skip it
|
|
|
|
|
*/
|
1994-11-17 06:24:25 +00:00
|
|
|
if ((p->p_flag & P_SYSTEM) || (p->p_pid == 1) ||
|
|
|
|
|
((p->p_pid < 48) && (vm_swap_size != 0))) {
|
1994-10-22 02:18:03 +00:00
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
/*
|
|
|
|
|
* if the process is in a non-running type state,
|
|
|
|
|
* don't touch it.
|
|
|
|
|
*/
|
|
|
|
|
if (p->p_stat != SRUN && p->p_stat != SSLEEP) {
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
/*
|
|
|
|
|
* get the process size
|
|
|
|
|
*/
|
|
|
|
|
size = p->p_vmspace->vm_pmap.pm_stats.resident_count;
|
|
|
|
|
/*
|
|
|
|
|
* if the this process is bigger than the biggest one
|
|
|
|
|
* remember it.
|
|
|
|
|
*/
|
|
|
|
|
if (size > bigsize) {
|
|
|
|
|
bigproc = p;
|
|
|
|
|
bigsize = size;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
if (bigproc != NULL) {
|
1996-01-31 12:44:33 +00:00
|
|
|
killproc(bigproc, "out of swap space");
|
1994-10-22 02:18:03 +00:00
|
|
|
bigproc->p_estcpu = 0;
|
|
|
|
|
bigproc->p_nice = PRIO_MIN;
|
|
|
|
|
resetpriority(bigproc);
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
wakeup(&cnt.v_free_count);
|
1994-10-22 02:18:03 +00:00
|
|
|
}
|
|
|
|
|
}
|
1994-05-25 09:21:21 +00:00
|
|
|
return force_wakeup;
|
|
|
|
|
}
|
1994-05-24 10:09:53 +00:00
|
|
|
|
1997-07-27 04:49:19 +00:00
|
|
|
/*
|
|
|
|
|
* This routine tries to maintain the pseudo LRU active queue,
|
|
|
|
|
* so that during long periods of time where there is no paging,
|
|
|
|
|
* that some statistic accumlation still occurs. This code
|
|
|
|
|
* helps the situation where paging just starts to occur.
|
|
|
|
|
*/
|
|
|
|
|
static void
|
|
|
|
|
vm_pageout_page_stats()
|
|
|
|
|
{
|
|
|
|
|
int s;
|
|
|
|
|
vm_page_t m,next;
|
|
|
|
|
int pcount,tpcount; /* Number of pages to check */
|
|
|
|
|
static int fullintervalcount = 0;
|
Some VM improvements, including elimination of alot of Sig-11
problems. Tor Egge and others have helped with various VM bugs
lately, but don't blame him -- blame me!!!
pmap.c:
1) Create an object for kernel page table allocations. This
fixes a bogus allocation method previously used for such, by
grabbing pages from the kernel object, using bogus pindexes.
(This was a code cleanup, and perhaps a minor system stability
issue.)
pmap.c:
2) Pre-set the modify and accessed bits when prudent. This will
decrease bus traffic under certain circumstances.
vfs_bio.c, vfs_cluster.c:
3) Rather than calculating the beginning virtual byte offset
multiple times, stick the offset into the buffer header, so
that the calculated offset can be reused. (Long long multiplies
are often expensive, and this is a probably unmeasurable performance
improvement, and code cleanup.)
vfs_bio.c:
4) Handle write recursion more intelligently (but not perfectly) so
that it is less likely to cause a system panic, and is also
much more robust.
vfs_bio.c:
5) getblk incorrectly wrote out blocks that are incorrectly sized.
The problem is fixed, and writes blocks out ONLY when B_DELWRI
is true.
vfs_bio.c:
6) Check that already constituted buffers have fully valid pages. If
not, then make sure that the B_CACHE bit is not set. (This was
a major source of Sig-11 type problems.)
vfs_bio.c:
7) Fix a potential system deadlock due to an incorrectly specified
sleep priority while waiting for a buffer write operation. The
change that I made opens the system up to serious problems, and
we need to examine the issue of process sleep priorities.
vfs_cluster.c, vfs_bio.c:
8) Make clustered reads work more correctly (and more completely)
when buffers are already constituted, but not fully valid.
(This was another system reliability issue.)
vfs_subr.c, ffs_inode.c:
9) Create a vtruncbuf function, which is used by filesystems that
can truncate files. The vinvalbuf forced a file sync type operation,
while vtruncbuf only invalidates the buffers past the new end of file,
and also invalidates the appropriate pages. (This was a system reliabiliy
and performance issue.)
10) Modify FFS to use vtruncbuf.
vm_object.c:
11) Make the object rundown mechanism for OBJT_VNODE type objects work
more correctly. Included in that fix, create pager entries for
the OBJT_DEAD pager type, so that paging requests that might slip
in during race conditions are properly handled. (This was a system
reliability issue.)
vm_page.c:
12) Make some of the page validation routines be a little less picky
about arguments passed to them. Also, support page invalidation
change the object generation count so that we handle generation
counts a little more robustly.
vm_pageout.c:
13) Further reduce pageout daemon activity when the system doesn't
need help from it. There should be no additional performance
decrease even when the pageout daemon is running. (This was
a significant performance issue.)
vnode_pager.c:
14) Teach the vnode pager to handle race conditions during vnode
deallocations.
1998-03-16 01:56:03 +00:00
|
|
|
int page_shortage;
|
|
|
|
|
|
|
|
|
|
page_shortage = (cnt.v_inactive_target + cnt.v_cache_max + cnt.v_free_min) -
|
|
|
|
|
(cnt.v_free_count + cnt.v_inactive_count + cnt.v_cache_count);
|
|
|
|
|
if (page_shortage <= 0)
|
|
|
|
|
return;
|
1997-07-27 04:49:19 +00:00
|
|
|
|
|
|
|
|
pcount = cnt.v_active_count;
|
|
|
|
|
fullintervalcount += vm_pageout_stats_interval;
|
|
|
|
|
if (fullintervalcount < vm_pageout_full_stats_interval) {
|
|
|
|
|
tpcount = (vm_pageout_stats_max * cnt.v_active_count) / cnt.v_page_count;
|
|
|
|
|
if (pcount > tpcount)
|
|
|
|
|
pcount = tpcount;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
m = TAILQ_FIRST(&vm_page_queue_active);
|
|
|
|
|
while ((m != NULL) && (pcount-- > 0)) {
|
1997-10-06 02:48:16 +00:00
|
|
|
int actcount;
|
1997-07-27 04:49:19 +00:00
|
|
|
|
|
|
|
|
if (m->queue != PQ_ACTIVE) {
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
next = TAILQ_NEXT(m, pageq);
|
|
|
|
|
/*
|
|
|
|
|
* Don't deactivate pages that are busy.
|
|
|
|
|
*/
|
|
|
|
|
if ((m->busy != 0) ||
|
|
|
|
|
(m->flags & PG_BUSY) ||
|
|
|
|
|
(m->hold_count != 0)) {
|
|
|
|
|
s = splvm();
|
|
|
|
|
TAILQ_REMOVE(&vm_page_queue_active, m, pageq);
|
|
|
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, m, pageq);
|
|
|
|
|
splx(s);
|
|
|
|
|
m = next;
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
|
1997-10-06 02:48:16 +00:00
|
|
|
actcount = 0;
|
1997-07-27 04:49:19 +00:00
|
|
|
if (m->flags & PG_REFERENCED) {
|
1998-09-04 08:06:57 +00:00
|
|
|
vm_page_flag_clear(m, PG_REFERENCED);
|
1997-10-06 02:48:16 +00:00
|
|
|
actcount += 1;
|
1997-07-27 04:49:19 +00:00
|
|
|
}
|
|
|
|
|
|
1997-10-06 02:48:16 +00:00
|
|
|
actcount += pmap_ts_referenced(VM_PAGE_TO_PHYS(m));
|
|
|
|
|
if (actcount) {
|
|
|
|
|
m->act_count += ACT_ADVANCE + actcount;
|
1997-07-27 04:49:19 +00:00
|
|
|
if (m->act_count > ACT_MAX)
|
|
|
|
|
m->act_count = ACT_MAX;
|
|
|
|
|
s = splvm();
|
|
|
|
|
TAILQ_REMOVE(&vm_page_queue_active, m, pageq);
|
|
|
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, m, pageq);
|
|
|
|
|
splx(s);
|
|
|
|
|
} else {
|
|
|
|
|
if (m->act_count == 0) {
|
1997-10-06 02:48:16 +00:00
|
|
|
/*
|
|
|
|
|
* We turn off page access, so that we have more accurate
|
|
|
|
|
* RSS stats. We don't do this in the normal page deactivation
|
|
|
|
|
* when the system is loaded VM wise, because the cost of
|
|
|
|
|
* the large number of page protect operations would be higher
|
|
|
|
|
* than the value of doing the operation.
|
|
|
|
|
*/
|
1997-07-27 04:49:19 +00:00
|
|
|
vm_page_protect(m, VM_PROT_NONE);
|
|
|
|
|
vm_page_deactivate(m);
|
|
|
|
|
} else {
|
|
|
|
|
m->act_count -= min(m->act_count, ACT_DECLINE);
|
|
|
|
|
s = splvm();
|
|
|
|
|
TAILQ_REMOVE(&vm_page_queue_active, m, pageq);
|
|
|
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, m, pageq);
|
|
|
|
|
splx(s);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
m = next;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
1996-05-29 05:15:33 +00:00
|
|
|
static int
|
|
|
|
|
vm_pageout_free_page_calc(count)
|
|
|
|
|
vm_size_t count;
|
|
|
|
|
{
|
|
|
|
|
if (count < cnt.v_page_count)
|
|
|
|
|
return 0;
|
|
|
|
|
/*
|
|
|
|
|
* free_reserved needs to include enough for the largest swap pager
|
|
|
|
|
* structures plus enough for any pv_entry structs when paging.
|
|
|
|
|
*/
|
|
|
|
|
if (cnt.v_page_count > 1024)
|
|
|
|
|
cnt.v_free_min = 4 + (cnt.v_page_count - 1024) / 200;
|
|
|
|
|
else
|
|
|
|
|
cnt.v_free_min = 4;
|
1996-05-31 00:38:04 +00:00
|
|
|
cnt.v_pageout_free_min = (2*MAXBSIZE)/PAGE_SIZE +
|
|
|
|
|
cnt.v_interrupt_free_min;
|
|
|
|
|
cnt.v_free_reserved = vm_pageout_page_count +
|
1998-02-24 10:16:23 +00:00
|
|
|
cnt.v_pageout_free_min + (count / 768) + PQ_L2_SIZE;
|
1996-09-28 03:33:40 +00:00
|
|
|
cnt.v_free_min += cnt.v_free_reserved;
|
1996-05-29 05:15:33 +00:00
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
|
|
|
|
* vm_pageout is the high level pageout daemon.
|
|
|
|
|
*/
|
1995-08-28 09:19:25 +00:00
|
|
|
static void
|
1994-05-25 09:21:21 +00:00
|
|
|
vm_pageout()
|
1994-05-24 10:09:53 +00:00
|
|
|
{
|
|
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* Initialize some paging parameters.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
|
|
|
|
|
1995-04-09 06:03:56 +00:00
|
|
|
cnt.v_interrupt_free_min = 2;
|
1996-05-31 00:38:04 +00:00
|
|
|
if (cnt.v_page_count < 2000)
|
|
|
|
|
vm_pageout_page_count = 8;
|
1995-04-09 06:03:56 +00:00
|
|
|
|
1996-05-29 05:15:33 +00:00
|
|
|
vm_pageout_free_page_calc(cnt.v_page_count);
|
1994-09-12 11:31:36 +00:00
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* free_reserved needs to include enough for the largest swap pager
|
|
|
|
|
* structures plus enough for any pv_entry structs when paging.
|
1994-09-12 11:31:36 +00:00
|
|
|
*/
|
1998-02-24 10:16:23 +00:00
|
|
|
if (cnt.v_free_count > 6144)
|
|
|
|
|
cnt.v_free_target = 3 * cnt.v_free_min + cnt.v_free_reserved;
|
|
|
|
|
else
|
|
|
|
|
cnt.v_free_target = 2 * cnt.v_free_min + cnt.v_free_reserved;
|
1995-02-22 10:27:24 +00:00
|
|
|
|
1998-02-24 10:16:23 +00:00
|
|
|
if (cnt.v_free_count > 2048) {
|
|
|
|
|
cnt.v_cache_min = cnt.v_free_target;
|
|
|
|
|
cnt.v_cache_max = 2 * cnt.v_cache_min;
|
|
|
|
|
cnt.v_inactive_target = (3 * cnt.v_free_target) / 2;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
} else {
|
|
|
|
|
cnt.v_cache_min = 0;
|
|
|
|
|
cnt.v_cache_max = 0;
|
1995-02-22 10:27:24 +00:00
|
|
|
cnt.v_inactive_target = cnt.v_free_count / 4;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
}
|
1998-02-23 08:22:48 +00:00
|
|
|
if (cnt.v_inactive_target > cnt.v_free_count / 3)
|
|
|
|
|
cnt.v_inactive_target = cnt.v_free_count / 3;
|
1994-05-25 09:21:21 +00:00
|
|
|
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
/* XXX does not really belong here */
|
1994-05-24 10:09:53 +00:00
|
|
|
if (vm_page_max_wired == 0)
|
|
|
|
|
vm_page_max_wired = cnt.v_free_count / 3;
|
|
|
|
|
|
1997-07-27 04:49:19 +00:00
|
|
|
if (vm_pageout_stats_max == 0)
|
|
|
|
|
vm_pageout_stats_max = cnt.v_free_target;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Set interval in seconds for stats scan.
|
|
|
|
|
*/
|
|
|
|
|
if (vm_pageout_stats_interval == 0)
|
Some VM improvements, including elimination of alot of Sig-11
problems. Tor Egge and others have helped with various VM bugs
lately, but don't blame him -- blame me!!!
pmap.c:
1) Create an object for kernel page table allocations. This
fixes a bogus allocation method previously used for such, by
grabbing pages from the kernel object, using bogus pindexes.
(This was a code cleanup, and perhaps a minor system stability
issue.)
pmap.c:
2) Pre-set the modify and accessed bits when prudent. This will
decrease bus traffic under certain circumstances.
vfs_bio.c, vfs_cluster.c:
3) Rather than calculating the beginning virtual byte offset
multiple times, stick the offset into the buffer header, so
that the calculated offset can be reused. (Long long multiplies
are often expensive, and this is a probably unmeasurable performance
improvement, and code cleanup.)
vfs_bio.c:
4) Handle write recursion more intelligently (but not perfectly) so
that it is less likely to cause a system panic, and is also
much more robust.
vfs_bio.c:
5) getblk incorrectly wrote out blocks that are incorrectly sized.
The problem is fixed, and writes blocks out ONLY when B_DELWRI
is true.
vfs_bio.c:
6) Check that already constituted buffers have fully valid pages. If
not, then make sure that the B_CACHE bit is not set. (This was
a major source of Sig-11 type problems.)
vfs_bio.c:
7) Fix a potential system deadlock due to an incorrectly specified
sleep priority while waiting for a buffer write operation. The
change that I made opens the system up to serious problems, and
we need to examine the issue of process sleep priorities.
vfs_cluster.c, vfs_bio.c:
8) Make clustered reads work more correctly (and more completely)
when buffers are already constituted, but not fully valid.
(This was another system reliability issue.)
vfs_subr.c, ffs_inode.c:
9) Create a vtruncbuf function, which is used by filesystems that
can truncate files. The vinvalbuf forced a file sync type operation,
while vtruncbuf only invalidates the buffers past the new end of file,
and also invalidates the appropriate pages. (This was a system reliabiliy
and performance issue.)
10) Modify FFS to use vtruncbuf.
vm_object.c:
11) Make the object rundown mechanism for OBJT_VNODE type objects work
more correctly. Included in that fix, create pager entries for
the OBJT_DEAD pager type, so that paging requests that might slip
in during race conditions are properly handled. (This was a system
reliability issue.)
vm_page.c:
12) Make some of the page validation routines be a little less picky
about arguments passed to them. Also, support page invalidation
change the object generation count so that we handle generation
counts a little more robustly.
vm_pageout.c:
13) Further reduce pageout daemon activity when the system doesn't
need help from it. There should be no additional performance
decrease even when the pageout daemon is running. (This was
a significant performance issue.)
vnode_pager.c:
14) Teach the vnode pager to handle race conditions during vnode
deallocations.
1998-03-16 01:56:03 +00:00
|
|
|
vm_pageout_stats_interval = 5;
|
1997-07-27 04:49:19 +00:00
|
|
|
if (vm_pageout_full_stats_interval == 0)
|
|
|
|
|
vm_pageout_full_stats_interval = vm_pageout_stats_interval * 4;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Set maximum free per pass
|
|
|
|
|
*/
|
|
|
|
|
if (vm_pageout_stats_free_max == 0)
|
Some VM improvements, including elimination of alot of Sig-11
problems. Tor Egge and others have helped with various VM bugs
lately, but don't blame him -- blame me!!!
pmap.c:
1) Create an object for kernel page table allocations. This
fixes a bogus allocation method previously used for such, by
grabbing pages from the kernel object, using bogus pindexes.
(This was a code cleanup, and perhaps a minor system stability
issue.)
pmap.c:
2) Pre-set the modify and accessed bits when prudent. This will
decrease bus traffic under certain circumstances.
vfs_bio.c, vfs_cluster.c:
3) Rather than calculating the beginning virtual byte offset
multiple times, stick the offset into the buffer header, so
that the calculated offset can be reused. (Long long multiplies
are often expensive, and this is a probably unmeasurable performance
improvement, and code cleanup.)
vfs_bio.c:
4) Handle write recursion more intelligently (but not perfectly) so
that it is less likely to cause a system panic, and is also
much more robust.
vfs_bio.c:
5) getblk incorrectly wrote out blocks that are incorrectly sized.
The problem is fixed, and writes blocks out ONLY when B_DELWRI
is true.
vfs_bio.c:
6) Check that already constituted buffers have fully valid pages. If
not, then make sure that the B_CACHE bit is not set. (This was
a major source of Sig-11 type problems.)
vfs_bio.c:
7) Fix a potential system deadlock due to an incorrectly specified
sleep priority while waiting for a buffer write operation. The
change that I made opens the system up to serious problems, and
we need to examine the issue of process sleep priorities.
vfs_cluster.c, vfs_bio.c:
8) Make clustered reads work more correctly (and more completely)
when buffers are already constituted, but not fully valid.
(This was another system reliability issue.)
vfs_subr.c, ffs_inode.c:
9) Create a vtruncbuf function, which is used by filesystems that
can truncate files. The vinvalbuf forced a file sync type operation,
while vtruncbuf only invalidates the buffers past the new end of file,
and also invalidates the appropriate pages. (This was a system reliabiliy
and performance issue.)
10) Modify FFS to use vtruncbuf.
vm_object.c:
11) Make the object rundown mechanism for OBJT_VNODE type objects work
more correctly. Included in that fix, create pager entries for
the OBJT_DEAD pager type, so that paging requests that might slip
in during race conditions are properly handled. (This was a system
reliability issue.)
vm_page.c:
12) Make some of the page validation routines be a little less picky
about arguments passed to them. Also, support page invalidation
change the object generation count so that we handle generation
counts a little more robustly.
vm_pageout.c:
13) Further reduce pageout daemon activity when the system doesn't
need help from it. There should be no additional performance
decrease even when the pageout daemon is running. (This was
a significant performance issue.)
vnode_pager.c:
14) Teach the vnode pager to handle race conditions during vnode
deallocations.
1998-03-16 01:56:03 +00:00
|
|
|
vm_pageout_stats_free_max = 5;
|
1997-07-27 04:49:19 +00:00
|
|
|
|
1997-12-06 02:23:36 +00:00
|
|
|
max_page_launder = (cnt.v_page_count > 1800 ? 32 : 16);
|
1994-05-25 09:21:21 +00:00
|
|
|
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
swap_pager_swap_init();
|
1994-05-24 10:09:53 +00:00
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* The pageout daemon is never done, so loop forever.
|
1994-05-24 10:09:53 +00:00
|
|
|
*/
|
|
|
|
|
while (TRUE) {
|
1997-07-27 04:49:19 +00:00
|
|
|
int error;
|
1996-05-18 03:38:05 +00:00
|
|
|
int s = splvm();
|
1995-03-01 23:30:04 +00:00
|
|
|
if (!vm_pages_needed ||
|
1996-05-29 06:33:30 +00:00
|
|
|
((cnt.v_free_count + cnt.v_cache_count) > cnt.v_free_min)) {
|
1995-03-01 23:30:04 +00:00
|
|
|
vm_pages_needed = 0;
|
1997-07-27 04:49:19 +00:00
|
|
|
error = tsleep(&vm_pages_needed,
|
|
|
|
|
PVM, "psleep", vm_pageout_stats_interval * hz);
|
|
|
|
|
if (error && !vm_pages_needed) {
|
|
|
|
|
splx(s);
|
|
|
|
|
vm_pageout_page_stats();
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
} else if (vm_pages_needed) {
|
1998-02-23 08:22:48 +00:00
|
|
|
vm_pages_needed = 0;
|
|
|
|
|
tsleep(&vm_pages_needed, PVM, "psleep", hz/2);
|
1995-03-01 23:30:04 +00:00
|
|
|
}
|
1998-02-23 08:22:48 +00:00
|
|
|
|
1996-05-18 03:38:05 +00:00
|
|
|
if (vm_pages_needed)
|
|
|
|
|
cnt.v_pdwakeups++;
|
1995-03-01 23:30:04 +00:00
|
|
|
vm_pages_needed = 0;
|
|
|
|
|
splx(s);
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
vm_pageout_scan();
|
VM level code cleanups.
1) Start using TSM.
Struct procs continue to point to upages structure, after being freed.
Struct vmspace continues to point to pte object and kva space for kstack.
u_map is now superfluous.
2) vm_map's don't need to be reference counted. They always exist either
in the kernel or in a vmspace. The vmspaces are managed by reference
counts.
3) Remove the "wired" vm_map nonsense.
4) No need to keep a cache of kernel stack kva's.
5) Get rid of strange looking ++var, and change to var++.
6) Change more data structures to use our "zone" allocator. Added
struct proc, struct vmspace and struct vnode. This saves a significant
amount of kva space and physical memory. Additionally, this enables
TSM for the zone managed memory.
7) Keep ioopt disabled for now.
8) Remove the now bogus "single use" map concept.
9) Use generation counts or id's for data structures residing in TSM, where
it allows us to avoid unneeded restart overhead during traversals, where
blocking might occur.
10) Account better for memory deficits, so the pageout daemon will be able
to make enough memory available (experimental.)
11) Fix some vnode locking problems. (From Tor, I think.)
12) Add a check in ufs_lookup, to avoid lots of unneeded calls to bcmp.
(experimental.)
13) Significantly shrink, cleanup, and make slightly faster the vm_fault.c
code. Use generation counts, get rid of unneded collpase operations,
and clean up the cluster code.
14) Make vm_zone more suitable for TSM.
This commit is partially as a result of discussions and contributions from
other people, including DG, Tor Egge, PHK, and probably others that I
have forgotten to attribute (so let me know, if I forgot.)
This is not the infamous, final cleanup of the vnode stuff, but a necessary
step. Vnode mgmt should be correct, but things might still change, and
there is still some missing stuff (like ioopt, and physical backing of
non-merged cache files, debugging of layering concepts.)
1998-01-22 17:30:44 +00:00
|
|
|
vm_pageout_deficit = 0;
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
wakeup(&cnt.v_free_count);
|
1994-05-24 10:09:53 +00:00
|
|
|
}
|
|
|
|
|
}
|
1994-05-25 09:21:21 +00:00
|
|
|
|
1996-11-28 23:15:07 +00:00
|
|
|
void
|
|
|
|
|
pagedaemon_wakeup()
|
|
|
|
|
{
|
|
|
|
|
if (!vm_pages_needed && curproc != pageproc) {
|
|
|
|
|
vm_pages_needed++;
|
|
|
|
|
wakeup(&vm_pages_needed);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#if !defined(NO_SWAPPING)
|
1996-02-22 10:57:37 +00:00
|
|
|
static void
|
|
|
|
|
vm_req_vmdaemon()
|
|
|
|
|
{
|
|
|
|
|
static int lastrun = 0;
|
|
|
|
|
|
1996-05-18 03:38:05 +00:00
|
|
|
if ((ticks > (lastrun + hz)) || (ticks < lastrun)) {
|
1996-02-22 10:57:37 +00:00
|
|
|
wakeup(&vm_daemon_needed);
|
|
|
|
|
lastrun = ticks;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
1995-08-28 09:19:25 +00:00
|
|
|
static void
|
1995-02-25 18:39:04 +00:00
|
|
|
vm_daemon()
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
{
|
1994-11-06 05:07:53 +00:00
|
|
|
struct proc *p;
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
|
|
|
|
|
while (TRUE) {
|
1998-06-02 05:39:13 +00:00
|
|
|
tsleep(&vm_daemon_needed, PPAUSE, "psleep", 0);
|
NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
1995-07-13 08:48:48 +00:00
|
|
|
if (vm_pageout_req_swapout) {
|
1997-12-06 02:23:36 +00:00
|
|
|
swapout_procs(vm_pageout_req_swapout);
|
1995-04-17 10:00:55 +00:00
|
|
|
vm_pageout_req_swapout = 0;
|
|
|
|
|
}
|
1994-11-06 05:07:53 +00:00
|
|
|
/*
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
* scan the processes for exceeding their rlimits or if
|
|
|
|
|
* process is swapped out -- deactivate pages
|
1994-11-06 05:07:53 +00:00
|
|
|
*/
|
|
|
|
|
|
1996-03-11 06:11:43 +00:00
|
|
|
for (p = allproc.lh_first; p != 0; p = p->p_list.le_next) {
|
1994-11-06 05:07:53 +00:00
|
|
|
quad_t limit;
|
|
|
|
|
vm_offset_t size;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* if this is a system process or if we have already
|
|
|
|
|
* looked at this process, skip it.
|
|
|
|
|
*/
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
if (p->p_flag & (P_SYSTEM | P_WEXIT)) {
|
1994-11-06 05:07:53 +00:00
|
|
|
continue;
|
|
|
|
|
}
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
/*
|
|
|
|
|
* if the process is in a non-running type state,
|
|
|
|
|
* don't touch it.
|
|
|
|
|
*/
|
1994-11-06 05:07:53 +00:00
|
|
|
if (p->p_stat != SRUN && p->p_stat != SSLEEP) {
|
|
|
|
|
continue;
|
|
|
|
|
}
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
/*
|
|
|
|
|
* get a limit
|
|
|
|
|
*/
|
1994-11-06 05:07:53 +00:00
|
|
|
limit = qmin(p->p_rlimit[RLIMIT_RSS].rlim_cur,
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
p->p_rlimit[RLIMIT_RSS].rlim_max);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* let processes that are swapped out really be
|
|
|
|
|
* swapped out set the limit to nothing (will force a
|
|
|
|
|
* swap-out.)
|
|
|
|
|
*/
|
1994-11-06 05:07:53 +00:00
|
|
|
if ((p->p_flag & P_INMEM) == 0)
|
These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.
The majority of the merged VM/cache work is by John Dyson.
The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.
vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.
vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.
vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.
vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.
vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.
pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.
vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.
proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.
swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.
machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.
machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.
ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.
Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
|
|
|
limit = 0; /* XXX */
|
1994-11-06 05:07:53 +00:00
|
|
|
|
1995-10-23 05:35:48 +00:00
|
|
|
size = p->p_vmspace->vm_pmap.pm_stats.resident_count * PAGE_SIZE;
|
1994-11-06 05:07:53 +00:00
|
|
|
if (limit >= 0 && size >= limit) {
|
|
|
|
|
vm_pageout_map_deactivate_pages(&p->p_vmspace->vm_map,
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
(vm_pindex_t)(limit >> PAGE_SHIFT) );
|
1994-11-06 05:07:53 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
This commit does a couple of things:
Re-enables the RSS limiting, and the routine is now tail-recursive,
making it much more safe (eliminates the possiblity of kernel stack
overflow.) Also, the RSS limiting is a little more intelligent about
finding the likely objects that are pushing the process over the limit.
Added some sysctls that help with VM system tuning.
New sysctl features:
1) Enable/disable lru pageout algorithm.
vm.pageout_algorithm = 0, default algorithm that works
well, especially using X windows and heavy
memory loading. Can have adverse effects,
sometimes slowing down program loading.
vm.pageout_algorithm = 1, close to true LRU. Works much
better than clock, etc. Does not work as well as
the default algorithm in general. Certain memory
"malloc" type benchmarks work a little better with
this setting.
Please give me feedback on the performance results
associated with these.
2) Enable/disable swapping.
vm.swapping_enabled = 1, default.
vm.swapping_enabled = 0, useful for cases where swapping
degrades performance.
The config option "NO_SWAPPING" is still operative, and
takes precedence over the sysctl. If "NO_SWAPPING" is
specified, the sysctl still exists, but "vm.swapping_enabled"
is hard-wired to "0".
Each of these can be changed "on the fly."
1996-06-26 05:39:27 +00:00
|
|
|
#endif
|
