d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a041c29bfd
freebsd-skq/sys/sparc64/pci/schizovar.h

91 lines
2.7 KiB
C
Raw Normal View History

Add a driver for `Schizo' Fireplane/Safari to PCI 2.1 and `Tomatillo' JBus to PCI 2.2 bridges. In theory, this driver should also handle `XMITS' Fireplane/Safari to PCI-X bridges but due to lack of access to such hardware, support for these hasn't be fleshed out, yet.
2008-09-28 00:07:05 +00:00
/*-
* Copyright (c) 2005 by Marius Strobl <marius@FreeBSD.org>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _SPARC64_PCI_SCHIZOVAR_H_
#define _SPARC64_PCI_SCHIZOVAR_H_
- Merge the *_SET macros from fire(4) which generally print out the register changes when compiled with SCHIZO_DEBUG and take advantage of them. - Add support for the XMITS Fireplane/Safari to PCI-X bridges. I tought I'd need this for a Sun Fire 3800, which then turned out to not being equipped with such a bridge though. The support for these should be complete but given that it hasn't actually been tested probing is disabled for now. This required a way to alter the XMITS configuration in case a PCI-X device is found further down the device tree so the sparc64 specific ofw_pci kobj was revived with a ofw_pci_setup_device method, which is called by the ofw_pcibus code for every device added. - A closer inspection of the OpenSolaris code indicates that consistent DMA flushing/syncing as well as the block store workaround should be applied with every BUS_DMASYNC_POSTREAD instead of in a wrapper around interrupt handlers for devices behind PCI-PCI bridges only as suggested by the documentation (code for the latter actually exists in OpenSolaris but is disabled by default), which also makes more sense. - Add a workaround for Casinni/Skyhawk combinations. Chances are that this solves the crashes seen when using the the on-board Casinni NICs of Sun Fire V480 equipped with centerplanes other than 501-6780 or 501-6790. This also takes advantage of the ofw_pci_setup_device method. - Mark some unused parameters as such.
2011-03-26 16:49:12 +00:00
struct schizo_softc;
struct schizo_iommu_state {
struct iommu_state sis_is;
struct schizo_softc *sis_sc;
};
Add a driver for `Schizo' Fireplane/Safari to PCI 2.1 and `Tomatillo' JBus to PCI 2.2 bridges. In theory, this driver should also handle `XMITS' Fireplane/Safari to PCI-X bridges but due to lack of access to such hardware, support for these hasn't be fleshed out, yet.
2008-09-28 00:07:05 +00:00
struct schizo_softc {
- Factor out the common and generic parts of the sparc64 host-PCI-bridge drivers into the revived sys/sparc64/pci/ofw_pci.c, previously already serving a similar purpose. This has been done with sun4v in mind, which explains a) the otherwise not that obvious scheme employed and b) why reusing sys/powerpc/ofw/ofw_pci.c was even lesser an option. - Add a workaround for QEMU once again not emulating real machines, in this case by not providing the OFW_PCI_CS_MEM64 range. [1] Submitted by: jhb [1] MFC after: 1 week
2015-09-12 22:49:32 +00:00
/*
* This is here so that we can hook up the common bus interface
* methods in ofw_pci.c directly.
*/
struct ofw_pci_softc sc_ops;
- Merge the *_SET macros from fire(4) which generally print out the register changes when compiled with SCHIZO_DEBUG and take advantage of them. - Add support for the XMITS Fireplane/Safari to PCI-X bridges. I tought I'd need this for a Sun Fire 3800, which then turned out to not being equipped with such a bridge though. The support for these should be complete but given that it hasn't actually been tested probing is disabled for now. This required a way to alter the XMITS configuration in case a PCI-X device is found further down the device tree so the sparc64 specific ofw_pci kobj was revived with a ofw_pci_setup_device method, which is called by the ofw_pcibus code for every device added. - A closer inspection of the OpenSolaris code indicates that consistent DMA flushing/syncing as well as the block store workaround should be applied with every BUS_DMASYNC_POSTREAD instead of in a wrapper around interrupt handlers for devices behind PCI-PCI bridges only as suggested by the documentation (code for the latter actually exists in OpenSolaris but is disabled by default), which also makes more sense. - Add a workaround for Casinni/Skyhawk combinations. Chances are that this solves the crashes seen when using the the on-board Casinni NICs of Sun Fire V480 equipped with centerplanes other than 501-6780 or 501-6790. This also takes advantage of the ofw_pci_setup_device method. - Mark some unused parameters as such.
2011-03-26 16:49:12 +00:00
- Factor out the common and generic parts of the sparc64 host-PCI-bridge drivers into the revived sys/sparc64/pci/ofw_pci.c, previously already serving a similar purpose. This has been done with sun4v in mind, which explains a) the otherwise not that obvious scheme employed and b) why reusing sys/powerpc/ofw/ofw_pci.c was even lesser an option. - Add a workaround for QEMU once again not emulating real machines, in this case by not providing the OFW_PCI_CS_MEM64 range. [1] Submitted by: jhb [1] MFC after: 1 week
2015-09-12 22:49:32 +00:00
struct schizo_iommu_state sc_is;
struct bus_dma_methods sc_dma_methods;
Add a driver for `Schizo' Fireplane/Safari to PCI 2.1 and `Tomatillo' JBus to PCI 2.2 bridges. In theory, this driver should also handle `XMITS' Fireplane/Safari to PCI-X bridges but due to lack of access to such hardware, support for these hasn't be fleshed out, yet.
2008-09-28 00:07:05 +00:00
- Merge the *_SET macros from fire(4) which generally print out the register changes when compiled with SCHIZO_DEBUG and take advantage of them. - Add support for the XMITS Fireplane/Safari to PCI-X bridges. I tought I'd need this for a Sun Fire 3800, which then turned out to not being equipped with such a bridge though. The support for these should be complete but given that it hasn't actually been tested probing is disabled for now. This required a way to alter the XMITS configuration in case a PCI-X device is found further down the device tree so the sparc64 specific ofw_pci kobj was revived with a ofw_pci_setup_device method, which is called by the ofw_pcibus code for every device added. - A closer inspection of the OpenSolaris code indicates that consistent DMA flushing/syncing as well as the block store workaround should be applied with every BUS_DMASYNC_POSTREAD instead of in a wrapper around interrupt handlers for devices behind PCI-PCI bridges only as suggested by the documentation (code for the latter actually exists in OpenSolaris but is disabled by default), which also makes more sense. - Add a workaround for Casinni/Skyhawk combinations. Chances are that this solves the crashes seen when using the the on-board Casinni NICs of Sun Fire V480 equipped with centerplanes other than 501-6780 or 501-6790. This also takes advantage of the ofw_pci_setup_device method. - Mark some unused parameters as such.
2011-03-26 16:49:12 +00:00
struct mtx sc_sync_mtx;
uint64_t sc_sync_val;
Add a driver for `Schizo' Fireplane/Safari to PCI 2.1 and `Tomatillo' JBus to PCI 2.2 bridges. In theory, this driver should also handle `XMITS' Fireplane/Safari to PCI-X bridges but due to lack of access to such hardware, support for these hasn't be fleshed out, yet.
2008-09-28 00:07:05 +00:00
struct mtx *sc_mtx;
- Factor out the common and generic parts of the sparc64 host-PCI-bridge drivers into the revived sys/sparc64/pci/ofw_pci.c, previously already serving a similar purpose. This has been done with sun4v in mind, which explains a) the otherwise not that obvious scheme employed and b) why reusing sys/powerpc/ofw/ofw_pci.c was even lesser an option. - Add a workaround for QEMU once again not emulating real machines, in this case by not providing the OFW_PCI_CS_MEM64 range. [1] Submitted by: jhb [1] MFC after: 1 week
2015-09-12 22:49:32 +00:00
struct resource *sc_mem_res[TOM_NREG];
struct resource *sc_irq_res[STX_NINTR];
void *sc_ihand[STX_NINTR];
SLIST_ENTRY(schizo_softc) sc_link;
device_t sc_dev;
Add a driver for `Schizo' Fireplane/Safari to PCI 2.1 and `Tomatillo' JBus to PCI 2.2 bridges. In theory, this driver should also handle `XMITS' Fireplane/Safari to PCI-X bridges but due to lack of access to such hardware, support for these hasn't be fleshed out, yet.
2008-09-28 00:07:05 +00:00
u_int sc_mode;
- According to OpenSolaris, CDMA flushing/syncing for Tomatillos and XMITS has to be basically done in the same manner as for the Sabres, i.e. only for devices behind PCI-PCI-bridges and after a PIO read on the far side of the farest PCI-PCI-bridge. Given that the Tomatillo documentation mentions no difference to the Schizo bridges in this regard and this is also still part of the procedure described Schizo documentation this seems about right so adjust accordingly (the unconditional CDMA flushing/syncing previously done was based on how Linux behaves). - Implement CDMA flushing/syncing for Schizo version >= 5, which requires the workaround described in Schizo Errata I-23. According to Schizo Errata I-13 it's just unusable with version < 5 though. [1] - Don't register the Schizo streaming buffer for now until it's usage is sorted out according to the erratas. - Register our interrupt filters with the revived INTR_FAST so they these interrupts can even interrupt filters of device drivers as necessary. - Remove the comment regarding lack of newbus'ified bus_dma(9) as being able to associate a DMA tag with a device would allow to implement CDMA flushing/syncing in bus_dmamap_sync(9) but that would totally kill performance. Given that for devices not behind a PCI-PCI bridge the host-to-PCI bridges also only do CDMA flushing/syncing based on interrupts there's no additional disadvantage for polling(4) callbacks in the case schizo(4) has to do the CDMA flushing/syncing but rather a general problem. Reported by: Michael Moll [1]
2008-11-20 18:44:09 +00:00
#define SCHIZO_MODE_SCZ 0
#define SCHIZO_MODE_TOM 1
#define SCHIZO_MODE_XMS 2
u_int sc_flags;
- Enable DMA write parity error interrupts on Schizo with a working implementation. - Revert the Sun Fire V890 WAR of r205254. Instead let schizo_pci_bus() only panic in case of fatal errors as the interrupt triggered by the error the firmware of these and also Sun Fire 280R with version 7 Schizo caused may happen as late as using the HBA and not only prior to touching the PCI bus (in the former case the actual error still is fatal but we clear it before touching the PCI bus). While at it count and export non-fatal error interrupts via sysctl(9). - Remove unnecessary locking from schizo_ue().
2010-05-14 20:00:21 +00:00
#define SCHIZO_FLAGS_BSWAR (1 << 0)
- Merge the *_SET macros from fire(4) which generally print out the register changes when compiled with SCHIZO_DEBUG and take advantage of them. - Add support for the XMITS Fireplane/Safari to PCI-X bridges. I tought I'd need this for a Sun Fire 3800, which then turned out to not being equipped with such a bridge though. The support for these should be complete but given that it hasn't actually been tested probing is disabled for now. This required a way to alter the XMITS configuration in case a PCI-X device is found further down the device tree so the sparc64 specific ofw_pci kobj was revived with a ofw_pci_setup_device method, which is called by the ofw_pcibus code for every device added. - A closer inspection of the OpenSolaris code indicates that consistent DMA flushing/syncing as well as the block store workaround should be applied with every BUS_DMASYNC_POSTREAD instead of in a wrapper around interrupt handlers for devices behind PCI-PCI bridges only as suggested by the documentation (code for the latter actually exists in OpenSolaris but is disabled by default), which also makes more sense. - Add a workaround for Casinni/Skyhawk combinations. Chances are that this solves the crashes seen when using the the on-board Casinni NICs of Sun Fire V480 equipped with centerplanes other than 501-6780 or 501-6790. This also takes advantage of the ofw_pci_setup_device method. - Mark some unused parameters as such.
2011-03-26 16:49:12 +00:00
#define SCHIZO_FLAGS_XMODE (1 << 1)
- According to OpenSolaris, CDMA flushing/syncing for Tomatillos and XMITS has to be basically done in the same manner as for the Sabres, i.e. only for devices behind PCI-PCI-bridges and after a PIO read on the far side of the farest PCI-PCI-bridge. Given that the Tomatillo documentation mentions no difference to the Schizo bridges in this regard and this is also still part of the procedure described Schizo documentation this seems about right so adjust accordingly (the unconditional CDMA flushing/syncing previously done was based on how Linux behaves). - Implement CDMA flushing/syncing for Schizo version >= 5, which requires the workaround described in Schizo Errata I-23. According to Schizo Errata I-13 it's just unusable with version < 5 though. [1] - Don't register the Schizo streaming buffer for now until it's usage is sorted out according to the erratas. - Register our interrupt filters with the revived INTR_FAST so they these interrupts can even interrupt filters of device drivers as necessary. - Remove the comment regarding lack of newbus'ified bus_dma(9) as being able to associate a DMA tag with a device would allow to implement CDMA flushing/syncing in bus_dmamap_sync(9) but that would totally kill performance. Given that for devices not behind a PCI-PCI bridge the host-to-PCI bridges also only do CDMA flushing/syncing based on interrupts there's no additional disadvantage for polling(4) callbacks in the case schizo(4) has to do the CDMA flushing/syncing but rather a general problem. Reported by: Michael Moll [1]
2008-11-20 18:44:09 +00:00
As it turns out r227960 may still be insufficient with PREEMPTION so try harder to get the CDMA sync interrupt delivered and also in a more efficient way: - wrap the whole process of sending and receiving the CDMA sync interrupt in a critical section so we don't get preempted, - send the CDMA sync interrupt to the CPU that is actually waiting for it to happen so we don't take a detour via another CPU, - instead of waiting for up to 15 seconds for the interrupt to trigger try the whole process for up to 15 times using a one second timeout (the code was also changed to just ignore belated interrupts of a previous tries should they appear). According to testing done by Peter Jeremy with the debugging also added as part of this commit the first two changes apparently are sufficient to now properly get the CDMA sync interrupts delivered at the first try though.
2012-01-28 22:42:33 +00:00
bus_addr_t sc_cdma_map;
- According to OpenSolaris, CDMA flushing/syncing for Tomatillos and XMITS has to be basically done in the same manner as for the Sabres, i.e. only for devices behind PCI-PCI-bridges and after a PIO read on the far side of the farest PCI-PCI-bridge. Given that the Tomatillo documentation mentions no difference to the Schizo bridges in this regard and this is also still part of the procedure described Schizo documentation this seems about right so adjust accordingly (the unconditional CDMA flushing/syncing previously done was based on how Linux behaves). - Implement CDMA flushing/syncing for Schizo version >= 5, which requires the workaround described in Schizo Errata I-23. According to Schizo Errata I-13 it's just unusable with version < 5 though. [1] - Don't register the Schizo streaming buffer for now until it's usage is sorted out according to the erratas. - Register our interrupt filters with the revived INTR_FAST so they these interrupts can even interrupt filters of device drivers as necessary. - Remove the comment regarding lack of newbus'ified bus_dma(9) as being able to associate a DMA tag with a device would allow to implement CDMA flushing/syncing in bus_dmamap_sync(9) but that would totally kill performance. Given that for devices not behind a PCI-PCI bridge the host-to-PCI bridges also only do CDMA flushing/syncing based on interrupts there's no additional disadvantage for polling(4) callbacks in the case schizo(4) has to do the CDMA flushing/syncing but rather a general problem. Reported by: Michael Moll [1]
2008-11-20 18:44:09 +00:00
bus_addr_t sc_cdma_clr;
As it turns out r227960 may still be insufficient with PREEMPTION so try harder to get the CDMA sync interrupt delivered and also in a more efficient way: - wrap the whole process of sending and receiving the CDMA sync interrupt in a critical section so we don't get preempted, - send the CDMA sync interrupt to the CPU that is actually waiting for it to happen so we don't take a detour via another CPU, - instead of waiting for up to 15 seconds for the interrupt to trigger try the whole process for up to 15 times using a one second timeout (the code was also changed to just ignore belated interrupts of a previous tries should they appear). According to testing done by Peter Jeremy with the debugging also added as part of this commit the first two changes apparently are sufficient to now properly get the CDMA sync interrupts delivered at the first try though.
2012-01-28 22:42:33 +00:00
uint32_t sc_cdma_vec;
- According to OpenSolaris, CDMA flushing/syncing for Tomatillos and XMITS has to be basically done in the same manner as for the Sabres, i.e. only for devices behind PCI-PCI-bridges and after a PIO read on the far side of the farest PCI-PCI-bridge. Given that the Tomatillo documentation mentions no difference to the Schizo bridges in this regard and this is also still part of the procedure described Schizo documentation this seems about right so adjust accordingly (the unconditional CDMA flushing/syncing previously done was based on how Linux behaves). - Implement CDMA flushing/syncing for Schizo version >= 5, which requires the workaround described in Schizo Errata I-23. According to Schizo Errata I-13 it's just unusable with version < 5 though. [1] - Don't register the Schizo streaming buffer for now until it's usage is sorted out according to the erratas. - Register our interrupt filters with the revived INTR_FAST so they these interrupts can even interrupt filters of device drivers as necessary. - Remove the comment regarding lack of newbus'ified bus_dma(9) as being able to associate a DMA tag with a device would allow to implement CDMA flushing/syncing in bus_dmamap_sync(9) but that would totally kill performance. Given that for devices not behind a PCI-PCI bridge the host-to-PCI bridges also only do CDMA flushing/syncing based on interrupts there's no additional disadvantage for polling(4) callbacks in the case schizo(4) has to do the CDMA flushing/syncing but rather a general problem. Reported by: Michael Moll [1]
2008-11-20 18:44:09 +00:00
uint32_t sc_cdma_state;
- Merge the *_SET macros from fire(4) which generally print out the register changes when compiled with SCHIZO_DEBUG and take advantage of them. - Add support for the XMITS Fireplane/Safari to PCI-X bridges. I tought I'd need this for a Sun Fire 3800, which then turned out to not being equipped with such a bridge though. The support for these should be complete but given that it hasn't actually been tested probing is disabled for now. This required a way to alter the XMITS configuration in case a PCI-X device is found further down the device tree so the sparc64 specific ofw_pci kobj was revived with a ofw_pci_setup_device method, which is called by the ofw_pcibus code for every device added. - A closer inspection of the OpenSolaris code indicates that consistent DMA flushing/syncing as well as the block store workaround should be applied with every BUS_DMASYNC_POSTREAD instead of in a wrapper around interrupt handlers for devices behind PCI-PCI bridges only as suggested by the documentation (code for the latter actually exists in OpenSolaris but is disabled by default), which also makes more sense. - Add a workaround for Casinni/Skyhawk combinations. Chances are that this solves the crashes seen when using the the on-board Casinni NICs of Sun Fire V480 equipped with centerplanes other than 501-6780 or 501-6790. This also takes advantage of the ofw_pci_setup_device method. - Mark some unused parameters as such.
2011-03-26 16:49:12 +00:00
#define SCHIZO_CDMA_STATE_IDLE (1 << 0)
- According to OpenSolaris, CDMA flushing/syncing for Tomatillos and XMITS has to be basically done in the same manner as for the Sabres, i.e. only for devices behind PCI-PCI-bridges and after a PIO read on the far side of the farest PCI-PCI-bridge. Given that the Tomatillo documentation mentions no difference to the Schizo bridges in this regard and this is also still part of the procedure described Schizo documentation this seems about right so adjust accordingly (the unconditional CDMA flushing/syncing previously done was based on how Linux behaves). - Implement CDMA flushing/syncing for Schizo version >= 5, which requires the workaround described in Schizo Errata I-23. According to Schizo Errata I-13 it's just unusable with version < 5 though. [1] - Don't register the Schizo streaming buffer for now until it's usage is sorted out according to the erratas. - Register our interrupt filters with the revived INTR_FAST so they these interrupts can even interrupt filters of device drivers as necessary. - Remove the comment regarding lack of newbus'ified bus_dma(9) as being able to associate a DMA tag with a device would allow to implement CDMA flushing/syncing in bus_dmamap_sync(9) but that would totally kill performance. Given that for devices not behind a PCI-PCI bridge the host-to-PCI bridges also only do CDMA flushing/syncing based on interrupts there's no additional disadvantage for polling(4) callbacks in the case schizo(4) has to do the CDMA flushing/syncing but rather a general problem. Reported by: Michael Moll [1]
2008-11-20 18:44:09 +00:00
#define SCHIZO_CDMA_STATE_PENDING (1 << 1)
- Merge the *_SET macros from fire(4) which generally print out the register changes when compiled with SCHIZO_DEBUG and take advantage of them. - Add support for the XMITS Fireplane/Safari to PCI-X bridges. I tought I'd need this for a Sun Fire 3800, which then turned out to not being equipped with such a bridge though. The support for these should be complete but given that it hasn't actually been tested probing is disabled for now. This required a way to alter the XMITS configuration in case a PCI-X device is found further down the device tree so the sparc64 specific ofw_pci kobj was revived with a ofw_pci_setup_device method, which is called by the ofw_pcibus code for every device added. - A closer inspection of the OpenSolaris code indicates that consistent DMA flushing/syncing as well as the block store workaround should be applied with every BUS_DMASYNC_POSTREAD instead of in a wrapper around interrupt handlers for devices behind PCI-PCI bridges only as suggested by the documentation (code for the latter actually exists in OpenSolaris but is disabled by default), which also makes more sense. - Add a workaround for Casinni/Skyhawk combinations. Chances are that this solves the crashes seen when using the the on-board Casinni NICs of Sun Fire V480 equipped with centerplanes other than 501-6780 or 501-6790. This also takes advantage of the ofw_pci_setup_device method. - Mark some unused parameters as such.
2011-03-26 16:49:12 +00:00
#define SCHIZO_CDMA_STATE_RECEIVED (1 << 2)
Add a driver for `Schizo' Fireplane/Safari to PCI 2.1 and `Tomatillo' JBus to PCI 2.2 bridges. In theory, this driver should also handle `XMITS' Fireplane/Safari to PCI-X bridges but due to lack of access to such hardware, support for these hasn't be fleshed out, yet.
2008-09-28 00:07:05 +00:00
u_int sc_half;
uint32_t sc_ign;
uint32_t sc_ver;
- Merge the *_SET macros from fire(4) which generally print out the register changes when compiled with SCHIZO_DEBUG and take advantage of them. - Add support for the XMITS Fireplane/Safari to PCI-X bridges. I tought I'd need this for a Sun Fire 3800, which then turned out to not being equipped with such a bridge though. The support for these should be complete but given that it hasn't actually been tested probing is disabled for now. This required a way to alter the XMITS configuration in case a PCI-X device is found further down the device tree so the sparc64 specific ofw_pci kobj was revived with a ofw_pci_setup_device method, which is called by the ofw_pcibus code for every device added. - A closer inspection of the OpenSolaris code indicates that consistent DMA flushing/syncing as well as the block store workaround should be applied with every BUS_DMASYNC_POSTREAD instead of in a wrapper around interrupt handlers for devices behind PCI-PCI bridges only as suggested by the documentation (code for the latter actually exists in OpenSolaris but is disabled by default), which also makes more sense. - Add a workaround for Casinni/Skyhawk combinations. Chances are that this solves the crashes seen when using the the on-board Casinni NICs of Sun Fire V480 equipped with centerplanes other than 501-6780 or 501-6790. This also takes advantage of the ofw_pci_setup_device method. - Mark some unused parameters as such.
2011-03-26 16:49:12 +00:00
uint32_t sc_mrev;
Add a driver for `Schizo' Fireplane/Safari to PCI 2.1 and `Tomatillo' JBus to PCI 2.2 bridges. In theory, this driver should also handle `XMITS' Fireplane/Safari to PCI-X bridges but due to lack of access to such hardware, support for these hasn't be fleshed out, yet.
2008-09-28 00:07:05 +00:00
- Enable DMA write parity error interrupts on Schizo with a working implementation. - Revert the Sun Fire V890 WAR of r205254. Instead let schizo_pci_bus() only panic in case of fatal errors as the interrupt triggered by the error the firmware of these and also Sun Fire 280R with version 7 Schizo caused may happen as late as using the HBA and not only prior to touching the PCI bus (in the former case the actual error still is fatal but we clear it before touching the PCI bus). While at it count and export non-fatal error interrupts via sysctl(9). - Remove unnecessary locking from schizo_ue().
2010-05-14 20:00:21 +00:00
uint32_t sc_stats_dma_ce;
uint32_t sc_stats_pci_non_fatal;
Add a driver for `Schizo' Fireplane/Safari to PCI 2.1 and `Tomatillo' JBus to PCI 2.2 bridges. In theory, this driver should also handle `XMITS' Fireplane/Safari to PCI-X bridges but due to lack of access to such hardware, support for these hasn't be fleshed out, yet.
2008-09-28 00:07:05 +00:00
};
#endif /* !_SPARC64_PCI_SCHIZOVAR_H_ */
Reference in New Issue Copy Permalink