2008-09-19 03:36:37 +00:00
|
|
|
# Copyright (c) 2001, 2008, Juniper Networks, Inc.
|
|
|
|
|
# All rights reserved.
|
|
|
|
|
#
|
|
|
|
|
# Redistribution and use in source and binary forms, with or without
|
|
|
|
|
# modification, are permitted provided that the following conditions
|
|
|
|
|
# are met:
|
|
|
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
# notice, this list of conditions and the following disclaimer.
|
|
|
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
# notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
# documentation and/or other materials provided with the distribution.
|
|
|
|
|
# 3. Neither the name of the Juniper Networks, Inc. nor the names of its
|
|
|
|
|
# contributors may be used to endorse or promote products derived from
|
|
|
|
|
# this software without specific prior written permission.
|
|
|
|
|
#
|
|
|
|
|
# THIS SOFTWARE IS PROVIDED BY JUNIPER NETWORKS AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
|
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
|
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
|
# ARE DISCLAIMED. IN NO EVENT SHALL JUNIPER NETWORKS OR CONTRIBUTORS BE LIABLE
|
|
|
|
|
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
|
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
|
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
|
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
|
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
|
# SUCH DAMAGE.
|
|
|
|
|
#
|
|
|
|
|
# JNPR: options.mips,v 1.2 2006/09/15 12:52:34
|
2008-04-13 06:25:43 +00:00
|
|
|
# $FreeBSD$
|
|
|
|
|
|
|
|
|
|
CPU_MIPS4KC opt_global.h
|
2016-02-02 07:47:38 +00:00
|
|
|
CPU_MIPS24K opt_global.h
|
|
|
|
|
CPU_MIPS34K opt_global.h
|
|
|
|
|
CPU_MIPS74K opt_global.h
|
|
|
|
|
CPU_MIPS1004K opt_global.h
|
|
|
|
|
CPU_MIPS1074K opt_global.h
|
|
|
|
|
CPU_INTERAPTIV opt_global.h
|
|
|
|
|
CPU_PROAPTIV opt_global.h
|
2008-04-13 06:25:43 +00:00
|
|
|
CPU_MIPS32 opt_global.h
|
|
|
|
|
CPU_MIPS64 opt_global.h
|
|
|
|
|
CPU_SENTRY5 opt_global.h
|
Merge from projects/mips to head by hand:
r200593 | imp | 2009-12-15 16:22:19 -0700 (Tue, 15 Dec 2009) | 4 lines
Remove the now-obsolete comments about compile-with. There are no
compile-with lines in this file at all. So we don't need two warnings
about them.
r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines
With this commit our friend RMI will now compile. I have
not tested it and the chances of it running yet are about
ZERO.. but it will now compile. The hard part now begins,
making it run ;-)
r198311 | neel | 2009-10-20 18:56:13 -0600 (Tue, 20 Oct 2009) | 8 lines
Update options.mips to support config options required to build the SWARM
kernel.
The SWARM kernel does not build yet but at least it gets past the kernel
config stage.
r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines
Does 4 things:
1) Adds future RMI directories
2) Places intr_machdep.c in specfic files.arch pointing to the generic
intr_machdep.c. This allows us to have an architecture dependant
intr_machdep.c (which we will need for RMI) in the machine specific
directory
3) removes intr_machdep.c from files.mips
4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We
may need to look at finding a better place to put this. But first I want to
get this thing compiling.
r196315 | imp | 2009-08-17 06:37:06 -0600 (Mon, 17 Aug 2009) | 5 lines
Like qdivrem, remove the other quad_t support stuff from 64-bit
kernels.
r195331 | imp | 2009-07-03 20:49:17 -0600 (Fri, 03 Jul 2009) | 4 lines
Merge in new cfe environment passing of kenv for swarm/sibyte boards.
Submitted by: Neelkanth Natu
r195732 | gonzo | 2009-07-16 20:28:27 -0600 (Thu, 16 Jul 2009) | 2 lines
- Add DES and Blowfish implementstions to build. Required by crypto(4)
r195437 | imp | 2009-07-07 23:57:58 -0600 (Tue, 07 Jul 2009) | 2 lines
The kernel isn't quite ready for this to be optional...
r195401 | imp | 2009-07-06 02:16:25 -0600 (Mon, 06 Jul 2009) | 4 lines
Only build qdivrem on 32-bit ISA...
r195331 | imp | 2009-07-03 20:49:17 -0600 (Fri, 03 Jul 2009) | 4 lines
Merge in new cfe environment passing of kenv for swarm/sibyte boards.
Submitted by: Neelkanth Natu
r195165 | gonzo | 2009-06-29 11:36:47 -0600 (Mon, 29 Jun 2009) | 2 lines
- add sys_machdep.c to build
r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines
- Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default
we assume that there is no FPU, because majority of SoC does
not have it.
r191085 | gonzo | 2009-04-14 20:41:35 -0600 (Tue, 14 Apr 2009) | 2 lines
- mainbus.c seems not to be used, disconnect it from build
r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines
Use FreeBSD/arm approach for handling bus space access: space tag is a pointer
to bus_space structure that defines access methods and hence every bus can
define own accessors. Default space is mips_bus_space_generic. It's a simple
interface to physical memory, values are read with regard to host system
byte order.
r187418 | gonzo | 2009-01-18 19:37:10 -0700 (Sun, 18 Jan 2009) | 4 lines
- Add trampoline stuff for bootloaders that do not support ELF
- Replace arm'ish KERNPHYSADDR/KERNVIRTADDR with
KERNLOADADDR/TRAMPLOADADDR and clean configs
r187415 | gonzo | 2009-01-18 16:49:02 -0700 (Sun, 18 Jan 2009) | 3 lines
- Move Silicon Backplanes code out to system-wide level (dev/siba) as
it's going to be used not only for siba5 devices.
2010-01-10 05:46:19 +00:00
|
|
|
CPU_HAVEFPU opt_global.h
|
|
|
|
|
CPU_SB1 opt_global.h
|
2010-02-25 11:54:10 +00:00
|
|
|
CPU_CNMIPS opt_global.h
|
2010-08-13 12:56:00 +00:00
|
|
|
CPU_RMI opt_global.h
|
2011-07-16 20:31:29 +00:00
|
|
|
CPU_NLM opt_global.h
|
2012-08-25 08:31:21 +00:00
|
|
|
CPU_BERI opt_global.h
|
2008-04-13 06:25:43 +00:00
|
|
|
|
2012-10-25 04:21:05 +00:00
|
|
|
# which MACHINE_ARCH architecture
|
|
|
|
|
MIPS
|
|
|
|
|
MIPSEL
|
|
|
|
|
MIPS64
|
|
|
|
|
MIPS64EL
|
|
|
|
|
MIPSN32
|
|
|
|
|
|
2012-03-03 08:19:18 +00:00
|
|
|
COMPAT_FREEBSD32 opt_compat.h
|
|
|
|
|
|
2008-04-13 06:25:43 +00:00
|
|
|
YAMON opt_global.h
|
|
|
|
|
CFE opt_global.h
|
|
|
|
|
CFE_CONSOLE opt_global.h
|
Merge from projects/mips to head by hand:
r200593 | imp | 2009-12-15 16:22:19 -0700 (Tue, 15 Dec 2009) | 4 lines
Remove the now-obsolete comments about compile-with. There are no
compile-with lines in this file at all. So we don't need two warnings
about them.
r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines
With this commit our friend RMI will now compile. I have
not tested it and the chances of it running yet are about
ZERO.. but it will now compile. The hard part now begins,
making it run ;-)
r198311 | neel | 2009-10-20 18:56:13 -0600 (Tue, 20 Oct 2009) | 8 lines
Update options.mips to support config options required to build the SWARM
kernel.
The SWARM kernel does not build yet but at least it gets past the kernel
config stage.
r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines
Does 4 things:
1) Adds future RMI directories
2) Places intr_machdep.c in specfic files.arch pointing to the generic
intr_machdep.c. This allows us to have an architecture dependant
intr_machdep.c (which we will need for RMI) in the machine specific
directory
3) removes intr_machdep.c from files.mips
4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We
may need to look at finding a better place to put this. But first I want to
get this thing compiling.
r196315 | imp | 2009-08-17 06:37:06 -0600 (Mon, 17 Aug 2009) | 5 lines
Like qdivrem, remove the other quad_t support stuff from 64-bit
kernels.
r195331 | imp | 2009-07-03 20:49:17 -0600 (Fri, 03 Jul 2009) | 4 lines
Merge in new cfe environment passing of kenv for swarm/sibyte boards.
Submitted by: Neelkanth Natu
r195732 | gonzo | 2009-07-16 20:28:27 -0600 (Thu, 16 Jul 2009) | 2 lines
- Add DES and Blowfish implementstions to build. Required by crypto(4)
r195437 | imp | 2009-07-07 23:57:58 -0600 (Tue, 07 Jul 2009) | 2 lines
The kernel isn't quite ready for this to be optional...
r195401 | imp | 2009-07-06 02:16:25 -0600 (Mon, 06 Jul 2009) | 4 lines
Only build qdivrem on 32-bit ISA...
r195331 | imp | 2009-07-03 20:49:17 -0600 (Fri, 03 Jul 2009) | 4 lines
Merge in new cfe environment passing of kenv for swarm/sibyte boards.
Submitted by: Neelkanth Natu
r195165 | gonzo | 2009-06-29 11:36:47 -0600 (Mon, 29 Jun 2009) | 2 lines
- add sys_machdep.c to build
r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines
- Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default
we assume that there is no FPU, because majority of SoC does
not have it.
r191085 | gonzo | 2009-04-14 20:41:35 -0600 (Tue, 14 Apr 2009) | 2 lines
- mainbus.c seems not to be used, disconnect it from build
r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines
Use FreeBSD/arm approach for handling bus space access: space tag is a pointer
to bus_space structure that defines access methods and hence every bus can
define own accessors. Default space is mips_bus_space_generic. It's a simple
interface to physical memory, values are read with regard to host system
byte order.
r187418 | gonzo | 2009-01-18 19:37:10 -0700 (Sun, 18 Jan 2009) | 4 lines
- Add trampoline stuff for bootloaders that do not support ELF
- Replace arm'ish KERNPHYSADDR/KERNVIRTADDR with
KERNLOADADDR/TRAMPLOADADDR and clean configs
r187415 | gonzo | 2009-01-18 16:49:02 -0700 (Sun, 18 Jan 2009) | 3 lines
- Move Silicon Backplanes code out to system-wide level (dev/siba) as
it's going to be used not only for siba5 devices.
2010-01-10 05:46:19 +00:00
|
|
|
CFE_ENV opt_global.h
|
|
|
|
|
CFE_ENV_SIZE opt_global.h
|
2008-04-13 06:25:43 +00:00
|
|
|
|
2012-08-25 08:09:37 +00:00
|
|
|
GFB_DEBUG opt_gfb.h
|
|
|
|
|
GFB_NO_FONT_LOADING opt_gfb.h
|
|
|
|
|
GFB_NO_MODE_CHANGE opt_gfb.h
|
|
|
|
|
|
Merge from projects/mips to head by hand:
r200593 | imp | 2009-12-15 16:22:19 -0700 (Tue, 15 Dec 2009) | 4 lines
Remove the now-obsolete comments about compile-with. There are no
compile-with lines in this file at all. So we don't need two warnings
about them.
r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines
With this commit our friend RMI will now compile. I have
not tested it and the chances of it running yet are about
ZERO.. but it will now compile. The hard part now begins,
making it run ;-)
r198311 | neel | 2009-10-20 18:56:13 -0600 (Tue, 20 Oct 2009) | 8 lines
Update options.mips to support config options required to build the SWARM
kernel.
The SWARM kernel does not build yet but at least it gets past the kernel
config stage.
r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines
Does 4 things:
1) Adds future RMI directories
2) Places intr_machdep.c in specfic files.arch pointing to the generic
intr_machdep.c. This allows us to have an architecture dependant
intr_machdep.c (which we will need for RMI) in the machine specific
directory
3) removes intr_machdep.c from files.mips
4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We
may need to look at finding a better place to put this. But first I want to
get this thing compiling.
r196315 | imp | 2009-08-17 06:37:06 -0600 (Mon, 17 Aug 2009) | 5 lines
Like qdivrem, remove the other quad_t support stuff from 64-bit
kernels.
r195331 | imp | 2009-07-03 20:49:17 -0600 (Fri, 03 Jul 2009) | 4 lines
Merge in new cfe environment passing of kenv for swarm/sibyte boards.
Submitted by: Neelkanth Natu
r195732 | gonzo | 2009-07-16 20:28:27 -0600 (Thu, 16 Jul 2009) | 2 lines
- Add DES and Blowfish implementstions to build. Required by crypto(4)
r195437 | imp | 2009-07-07 23:57:58 -0600 (Tue, 07 Jul 2009) | 2 lines
The kernel isn't quite ready for this to be optional...
r195401 | imp | 2009-07-06 02:16:25 -0600 (Mon, 06 Jul 2009) | 4 lines
Only build qdivrem on 32-bit ISA...
r195331 | imp | 2009-07-03 20:49:17 -0600 (Fri, 03 Jul 2009) | 4 lines
Merge in new cfe environment passing of kenv for swarm/sibyte boards.
Submitted by: Neelkanth Natu
r195165 | gonzo | 2009-06-29 11:36:47 -0600 (Mon, 29 Jun 2009) | 2 lines
- add sys_machdep.c to build
r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines
- Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default
we assume that there is no FPU, because majority of SoC does
not have it.
r191085 | gonzo | 2009-04-14 20:41:35 -0600 (Tue, 14 Apr 2009) | 2 lines
- mainbus.c seems not to be used, disconnect it from build
r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines
Use FreeBSD/arm approach for handling bus space access: space tag is a pointer
to bus_space structure that defines access methods and hence every bus can
define own accessors. Default space is mips_bus_space_generic. It's a simple
interface to physical memory, values are read with regard to host system
byte order.
r187418 | gonzo | 2009-01-18 19:37:10 -0700 (Sun, 18 Jan 2009) | 4 lines
- Add trampoline stuff for bootloaders that do not support ELF
- Replace arm'ish KERNPHYSADDR/KERNVIRTADDR with
KERNLOADADDR/TRAMPLOADADDR and clean configs
r187415 | gonzo | 2009-01-18 16:49:02 -0700 (Sun, 18 Jan 2009) | 3 lines
- Move Silicon Backplanes code out to system-wide level (dev/siba) as
it's going to be used not only for siba5 devices.
2010-01-10 05:46:19 +00:00
|
|
|
NOFPU opt_global.h
|
2008-04-13 06:25:43 +00:00
|
|
|
|
|
|
|
|
TICK_USE_YAMON_FREQ opt_global.h
|
|
|
|
|
TICK_USE_MALTA_RTC opt_global.h
|
Merge from projects/mips to head by hand:
r200593 | imp | 2009-12-15 16:22:19 -0700 (Tue, 15 Dec 2009) | 4 lines
Remove the now-obsolete comments about compile-with. There are no
compile-with lines in this file at all. So we don't need two warnings
about them.
r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines
With this commit our friend RMI will now compile. I have
not tested it and the chances of it running yet are about
ZERO.. but it will now compile. The hard part now begins,
making it run ;-)
r198311 | neel | 2009-10-20 18:56:13 -0600 (Tue, 20 Oct 2009) | 8 lines
Update options.mips to support config options required to build the SWARM
kernel.
The SWARM kernel does not build yet but at least it gets past the kernel
config stage.
r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines
Does 4 things:
1) Adds future RMI directories
2) Places intr_machdep.c in specfic files.arch pointing to the generic
intr_machdep.c. This allows us to have an architecture dependant
intr_machdep.c (which we will need for RMI) in the machine specific
directory
3) removes intr_machdep.c from files.mips
4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We
may need to look at finding a better place to put this. But first I want to
get this thing compiling.
r196315 | imp | 2009-08-17 06:37:06 -0600 (Mon, 17 Aug 2009) | 5 lines
Like qdivrem, remove the other quad_t support stuff from 64-bit
kernels.
r195331 | imp | 2009-07-03 20:49:17 -0600 (Fri, 03 Jul 2009) | 4 lines
Merge in new cfe environment passing of kenv for swarm/sibyte boards.
Submitted by: Neelkanth Natu
r195732 | gonzo | 2009-07-16 20:28:27 -0600 (Thu, 16 Jul 2009) | 2 lines
- Add DES and Blowfish implementstions to build. Required by crypto(4)
r195437 | imp | 2009-07-07 23:57:58 -0600 (Tue, 07 Jul 2009) | 2 lines
The kernel isn't quite ready for this to be optional...
r195401 | imp | 2009-07-06 02:16:25 -0600 (Mon, 06 Jul 2009) | 4 lines
Only build qdivrem on 32-bit ISA...
r195331 | imp | 2009-07-03 20:49:17 -0600 (Fri, 03 Jul 2009) | 4 lines
Merge in new cfe environment passing of kenv for swarm/sibyte boards.
Submitted by: Neelkanth Natu
r195165 | gonzo | 2009-06-29 11:36:47 -0600 (Mon, 29 Jun 2009) | 2 lines
- add sys_machdep.c to build
r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines
- Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default
we assume that there is no FPU, because majority of SoC does
not have it.
r191085 | gonzo | 2009-04-14 20:41:35 -0600 (Tue, 14 Apr 2009) | 2 lines
- mainbus.c seems not to be used, disconnect it from build
r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines
Use FreeBSD/arm approach for handling bus space access: space tag is a pointer
to bus_space structure that defines access methods and hence every bus can
define own accessors. Default space is mips_bus_space_generic. It's a simple
interface to physical memory, values are read with regard to host system
byte order.
r187418 | gonzo | 2009-01-18 19:37:10 -0700 (Sun, 18 Jan 2009) | 4 lines
- Add trampoline stuff for bootloaders that do not support ELF
- Replace arm'ish KERNPHYSADDR/KERNVIRTADDR with
KERNLOADADDR/TRAMPLOADADDR and clean configs
r187415 | gonzo | 2009-01-18 16:49:02 -0700 (Sun, 18 Jan 2009) | 3 lines
- Move Silicon Backplanes code out to system-wide level (dev/siba) as
it's going to be used not only for siba5 devices.
2010-01-10 05:46:19 +00:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# The highest memory address that can be used by the kernel in units of KB.
|
|
|
|
|
#
|
|
|
|
|
MAXMEM opt_global.h
|
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive
library:
o) Increase inline unit / large function growth limits for MIPS to accommodate
the needs of the Simple Executive, which uses a shocking amount of inlining.
o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and
the Octeon SoC.
o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific
board numbers, specifically to support the MR320.
o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd,
which improperly uses an evaluation board's board number and breaks board
detection at runtime. This board is sold by Portwell as the CAM-0100.
o) Add support for the RTC available on some Octeon boards.
o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO
ports can not work unless building for n64.
o) Clean up the CompactFlash driver to use Simple Executive macros and
structures where possible (it would be advisable to use the Simple Executive
API to set the PIO mode, too, but that is not done presently.) Also use
structures from FreeBSD's ATA layer rather than structures copied from
Linux.
o) Print available Octeon SoC features on boot.
o) Add support for the Octeon timecounter.
o) Use the Simple Executive's routines rather than local copies for doing reads
and writes to 64-bit addresses and use its macros for various device
addresses rather than using local copies.
o) Rename octeon_board_real to octeon_is_simulation to reduce differences with
Cavium-provided code originally written for Linux. Also make it use the
same simplified test that the Simple Executive and Linux both use rather
than our complex one.
o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus
to use normal interrupt allocation and setup routines.
o) Use the Simple Executive's bootmem facility to allocate physical memory for
the kernel, rather than assuming we know which addresses we can steal.
NB: This may reduce the amount of RAM the kernel reports you as having if
you are leaving large temporary allocations made by U-Boot allocated
when starting FreeBSD.
o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes
Ethernet interface naming from rgmxN to octeN. The new driver has vast
improvements over the old one, both in performance and functionality, but
does still have some features which have not been ported entirely and there
may be unimplemented code that can be hit in everyday use. I will make
every effort to correct those as they are reported.
o) Support loading the kernel on non-contiguous cores.
o) Add very conservative support for harvesting randomness from the Octeon
random number device.
o) Turn SMP on by default.
o) Clean up the style of the Octeon kernel configurations a little and make
them compile with -march=octeon.
o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple
Executive.
o) Modify the Simple Executive to build on FreeBSD and to build without
executive-config.h or cvmx-config.h. In the future we may want to
revert part of these changes and supply executive-config.h and
cvmx-config.h and access to the options contained in those files via
kernel configuration files.
o) Modify the Simple Executive USB routines to support getting and setting
of the USB PID.
2010-07-20 19:25:11 +00:00
|
|
|
|
2013-10-22 21:16:57 +00:00
|
|
|
#
|
|
|
|
|
# Manual override of cache config
|
|
|
|
|
#
|
|
|
|
|
MIPS_DISABLE_L1_CACHE opt_global.h
|
|
|
|
|
|
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive
library:
o) Increase inline unit / large function growth limits for MIPS to accommodate
the needs of the Simple Executive, which uses a shocking amount of inlining.
o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and
the Octeon SoC.
o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific
board numbers, specifically to support the MR320.
o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd,
which improperly uses an evaluation board's board number and breaks board
detection at runtime. This board is sold by Portwell as the CAM-0100.
o) Add support for the RTC available on some Octeon boards.
o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO
ports can not work unless building for n64.
o) Clean up the CompactFlash driver to use Simple Executive macros and
structures where possible (it would be advisable to use the Simple Executive
API to set the PIO mode, too, but that is not done presently.) Also use
structures from FreeBSD's ATA layer rather than structures copied from
Linux.
o) Print available Octeon SoC features on boot.
o) Add support for the Octeon timecounter.
o) Use the Simple Executive's routines rather than local copies for doing reads
and writes to 64-bit addresses and use its macros for various device
addresses rather than using local copies.
o) Rename octeon_board_real to octeon_is_simulation to reduce differences with
Cavium-provided code originally written for Linux. Also make it use the
same simplified test that the Simple Executive and Linux both use rather
than our complex one.
o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus
to use normal interrupt allocation and setup routines.
o) Use the Simple Executive's bootmem facility to allocate physical memory for
the kernel, rather than assuming we know which addresses we can steal.
NB: This may reduce the amount of RAM the kernel reports you as having if
you are leaving large temporary allocations made by U-Boot allocated
when starting FreeBSD.
o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes
Ethernet interface naming from rgmxN to octeN. The new driver has vast
improvements over the old one, both in performance and functionality, but
does still have some features which have not been ported entirely and there
may be unimplemented code that can be hit in everyday use. I will make
every effort to correct those as they are reported.
o) Support loading the kernel on non-contiguous cores.
o) Add very conservative support for harvesting randomness from the Octeon
random number device.
o) Turn SMP on by default.
o) Clean up the style of the Octeon kernel configurations a little and make
them compile with -march=octeon.
o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple
Executive.
o) Modify the Simple Executive to build on FreeBSD and to build without
executive-config.h or cvmx-config.h. In the future we may want to
revert part of these changes and supply executive-config.h and
cvmx-config.h and access to the options contained in those files via
kernel configuration files.
o) Modify the Simple Executive USB routines to support getting and setting
of the USB PID.
2010-07-20 19:25:11 +00:00
|
|
|
#
|
|
|
|
|
# Options that control the Cavium Simple Executive.
|
|
|
|
|
#
|
2012-11-24 02:00:29 +00:00
|
|
|
OCTEON_MODEL opt_cvmx.h
|
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive
library:
o) Increase inline unit / large function growth limits for MIPS to accommodate
the needs of the Simple Executive, which uses a shocking amount of inlining.
o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and
the Octeon SoC.
o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific
board numbers, specifically to support the MR320.
o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd,
which improperly uses an evaluation board's board number and breaks board
detection at runtime. This board is sold by Portwell as the CAM-0100.
o) Add support for the RTC available on some Octeon boards.
o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO
ports can not work unless building for n64.
o) Clean up the CompactFlash driver to use Simple Executive macros and
structures where possible (it would be advisable to use the Simple Executive
API to set the PIO mode, too, but that is not done presently.) Also use
structures from FreeBSD's ATA layer rather than structures copied from
Linux.
o) Print available Octeon SoC features on boot.
o) Add support for the Octeon timecounter.
o) Use the Simple Executive's routines rather than local copies for doing reads
and writes to 64-bit addresses and use its macros for various device
addresses rather than using local copies.
o) Rename octeon_board_real to octeon_is_simulation to reduce differences with
Cavium-provided code originally written for Linux. Also make it use the
same simplified test that the Simple Executive and Linux both use rather
than our complex one.
o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus
to use normal interrupt allocation and setup routines.
o) Use the Simple Executive's bootmem facility to allocate physical memory for
the kernel, rather than assuming we know which addresses we can steal.
NB: This may reduce the amount of RAM the kernel reports you as having if
you are leaving large temporary allocations made by U-Boot allocated
when starting FreeBSD.
o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes
Ethernet interface naming from rgmxN to octeN. The new driver has vast
improvements over the old one, both in performance and functionality, but
does still have some features which have not been ported entirely and there
may be unimplemented code that can be hit in everyday use. I will make
every effort to correct those as they are reported.
o) Support loading the kernel on non-contiguous cores.
o) Add very conservative support for harvesting randomness from the Octeon
random number device.
o) Turn SMP on by default.
o) Clean up the style of the Octeon kernel configurations a little and make
them compile with -march=octeon.
o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple
Executive.
o) Modify the Simple Executive to build on FreeBSD and to build without
executive-config.h or cvmx-config.h. In the future we may want to
revert part of these changes and supply executive-config.h and
cvmx-config.h and access to the options contained in those files via
kernel configuration files.
o) Modify the Simple Executive USB routines to support getting and setting
of the USB PID.
2010-07-20 19:25:11 +00:00
|
|
|
OCTEON_VENDOR_LANNER opt_cvmx.h
|
2013-01-02 23:17:50 +00:00
|
|
|
OCTEON_VENDOR_UBIQUITI opt_cvmx.h
|
2012-10-26 00:08:50 +00:00
|
|
|
OCTEON_VENDOR_RADISYS opt_cvmx.h
|
2013-04-23 09:40:42 +00:00
|
|
|
OCTEON_VENDOR_GEFES opt_cvmx.h
|
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive
library:
o) Increase inline unit / large function growth limits for MIPS to accommodate
the needs of the Simple Executive, which uses a shocking amount of inlining.
o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and
the Octeon SoC.
o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific
board numbers, specifically to support the MR320.
o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd,
which improperly uses an evaluation board's board number and breaks board
detection at runtime. This board is sold by Portwell as the CAM-0100.
o) Add support for the RTC available on some Octeon boards.
o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO
ports can not work unless building for n64.
o) Clean up the CompactFlash driver to use Simple Executive macros and
structures where possible (it would be advisable to use the Simple Executive
API to set the PIO mode, too, but that is not done presently.) Also use
structures from FreeBSD's ATA layer rather than structures copied from
Linux.
o) Print available Octeon SoC features on boot.
o) Add support for the Octeon timecounter.
o) Use the Simple Executive's routines rather than local copies for doing reads
and writes to 64-bit addresses and use its macros for various device
addresses rather than using local copies.
o) Rename octeon_board_real to octeon_is_simulation to reduce differences with
Cavium-provided code originally written for Linux. Also make it use the
same simplified test that the Simple Executive and Linux both use rather
than our complex one.
o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus
to use normal interrupt allocation and setup routines.
o) Use the Simple Executive's bootmem facility to allocate physical memory for
the kernel, rather than assuming we know which addresses we can steal.
NB: This may reduce the amount of RAM the kernel reports you as having if
you are leaving large temporary allocations made by U-Boot allocated
when starting FreeBSD.
o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes
Ethernet interface naming from rgmxN to octeN. The new driver has vast
improvements over the old one, both in performance and functionality, but
does still have some features which have not been ported entirely and there
may be unimplemented code that can be hit in everyday use. I will make
every effort to correct those as they are reported.
o) Support loading the kernel on non-contiguous cores.
o) Add very conservative support for harvesting randomness from the Octeon
random number device.
o) Turn SMP on by default.
o) Clean up the style of the Octeon kernel configurations a little and make
them compile with -march=octeon.
o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple
Executive.
o) Modify the Simple Executive to build on FreeBSD and to build without
executive-config.h or cvmx-config.h. In the future we may want to
revert part of these changes and supply executive-config.h and
cvmx-config.h and access to the options contained in those files via
kernel configuration files.
o) Modify the Simple Executive USB routines to support getting and setting
of the USB PID.
2010-07-20 19:25:11 +00:00
|
|
|
OCTEON_BOARD_CAPK_0100ND opt_cvmx.h
|
2011-04-05 05:29:10 +00:00
|
|
|
|
2013-10-22 21:08:25 +00:00
|
|
|
#
|
|
|
|
|
# Options specific to the BERI platform.
|
|
|
|
|
#
|
|
|
|
|
BERI_LARGE_TLB opt_global.h
|
|
|
|
|
|
2014-06-26 17:20:45 +00:00
|
|
|
#
|
|
|
|
|
# Options that control the NetFPGA-10G Embedded CPU Ethernet Core.
|
|
|
|
|
#
|
|
|
|
|
NF10BMAC_64BIT opt_netfpga.h
|
|
|
|
|
|
2011-04-05 05:29:10 +00:00
|
|
|
#
|
|
|
|
|
# Options that control the Atheros SoC peripherals
|
|
|
|
|
#
|
2012-05-01 04:35:53 +00:00
|
|
|
ARGE_DEBUG opt_arge.h
|
2012-05-01 06:18:30 +00:00
|
|
|
ARGE_MDIO opt_arge.h
|
2011-07-11 08:23:59 +00:00
|
|
|
|
2012-08-26 20:22:43 +00:00
|
|
|
#
|
|
|
|
|
# At least one of the AR71XX ubiquiti boards has a Redboot configuration
|
|
|
|
|
# that "lies" about the amount of RAM it has. Until a cleaner method is
|
|
|
|
|
# defined, this option will suffice in overriding what Redboot says.
|
|
|
|
|
#
|
|
|
|
|
AR71XX_REALMEM opt_ar71xx.h
|
|
|
|
|
AR71XX_ENV_UBOOT opt_ar71xx.h
|
|
|
|
|
AR71XX_ENV_REDBOOT opt_ar71xx.h
|
2014-05-09 14:02:18 +00:00
|
|
|
AR71XX_ENV_ROUTERBOOT opt_ar71xx.h
|
2012-08-26 20:22:43 +00:00
|
|
|
AR71XX_ATH_EEPROM opt_ar71xx.h
|
|
|
|
|
|
2011-07-11 08:23:59 +00:00
|
|
|
#
|
|
|
|
|
# Options that control the Ralink RT305xF Etherenet MAC.
|
|
|
|
|
#
|
|
|
|
|
IF_RT_DEBUG opt_if_rt.h
|
|
|
|
|
IF_RT_PHY_SUPPORT opt_if_rt.h
|
|
|
|
|
IF_RT_RING_DATA_COUNT opt_if_rt.h
|
|
|
|
|
|
2015-12-24 15:58:33 +00:00
|
|
|
#
|
|
|
|
|
# Options that control the Ralink/Mediatek SoC type.
|
|
|
|
|
#
|
|
|
|
|
MT7620 opt_rt305x.h
|
|
|
|
|
RT5350 opt_rt305x.h
|
|
|
|
|
RT305XF opt_rt305x.h
|
|
|
|
|
RT3052F opt_rt305x.h
|
|
|
|
|
RT3050F opt_rt305x.h
|
|
|
|
|
RT305X opt_rt305x.h
|
|
|
|
|
RT305X_UBOOT opt_rt305x.h
|
|
|
|
|
RT305X_USE_UART opt_rt305x.h
|
|
|
|
|
|
2012-08-13 17:38:38 +00:00
|
|
|
#
|
|
|
|
|
# Options that affect the pmap.
|
|
|
|
|
#
|
|
|
|
|
PV_STATS opt_pmap.h
|
2016-03-08 08:57:53 +00:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Options to use INTRNG code
|
|
|
|
|
#
|
|
|
|
|
MIPS_INTRNG opt_global.h
|
