d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a10443e8ba
freebsd-skq/sys/netinet/sctp_indata.c

5627 lines
171 KiB
C
Raw Normal View History

Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*-
- Copyright change, cisco's silly tool wants it to say: "Copyright (c) 2001-2007, by Cisco Systems," instead of *Copyright (c) 2001-2007, Cisco Systems," - Also fix a few straglers that were still in 2006.
2007-05-08 17:01:12 +00:00
* Copyright (c) 2001-2007, by Cisco Systems, Inc. All rights reserved.
Use consistent text at the begining of the files. MFC after: 3 days
2012-05-23 11:26:28 +00:00
* Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
* Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* a) Redistributions of source code must retain the above copyright notice,
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
* this list of conditions and the following disclaimer.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*
* b) Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
* the documentation and/or other materials provided with the distribution.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*
* c) Neither the name of Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <netinet/sctp_os.h>
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
#include <sys/proc.h>
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#include <netinet/sctp_var.h>
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
#include <netinet/sctp_sysctl.h>
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#include <netinet/sctp_header.h>
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
#include <netinet/sctp_pcb.h>
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#include <netinet/sctputil.h>
#include <netinet/sctp_output.h>
#include <netinet/sctp_uio.h>
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
#include <netinet/sctp_auth.h>
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#include <netinet/sctp_timer.h>
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
#include <netinet/sctp_asconf.h>
#include <netinet/sctp_indata.h>
#include <netinet/sctp_bsd_addr.h>
#include <netinet/sctp_input.h>
#include <netinet/sctp_crc32.h>
#include <netinet/sctp_lock_bsd.h>
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* NOTES: On the outbound side of things I need to check the sack timer to
* see if I should generate a sack into the chunk queue (if I have data to
* send that is and will be sending it .. for bundling.
*
* The callback in sctp_usrreq.c will get called when the socket is read from.
* This will cause sctp_service_queues() to get called on the top entry in
* the list.
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
static void
sctp_add_chk_to_control(struct sctp_queued_to_read *control,
struct sctp_stream_in *strm,
struct sctp_tcb *stcb,
struct sctp_association *asoc,
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
struct sctp_tmit_chunk *chk, int lock_held);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Matthew's changes to get inlines out, plus a few of my own to deal with the VRF inline function -> becomes a macro now. Submitted by: Matthew Jacobs
2007-06-16 00:33:47 +00:00
void
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_set_rwnd(struct sctp_tcb *stcb, struct sctp_association *asoc)
{
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
asoc->my_rwnd = sctp_calc_rwnd(stcb, asoc);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* Calculate what the rwnd would be */
- Matthew's changes to get inlines out, plus a few of my own to deal with the VRF inline function -> becomes a macro now. Submitted by: Matthew Jacobs
2007-06-16 00:33:47 +00:00
uint32_t
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_calc_rwnd(struct sctp_tcb *stcb, struct sctp_association *asoc)
{
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
uint32_t calc = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* This is really set wrong with respect to a 1-2-m socket. Since
Do the renaming of sb_cc to sb_ccc in a way with less code changes by using a macro. This is an alternate approach to https://svnweb.freebsd.org/changeset/base/275326 which is easier to handle upstream. Discussed with: rrs, glebius
2014-12-02 20:29:29 +00:00
* the sb_cc is the count that everyone as put up. When we re-write
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* sctp_soreceive then we will fix this so that ONLY this
* associations data is taken into account.
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (stcb->sctp_socket == NULL) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (calc);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
Do the renaming of sb_cc to sb_ccc in a way with less code changes by using a macro. This is an alternate approach to https://svnweb.freebsd.org/changeset/base/275326 which is easier to handle upstream. Discussed with: rrs, glebius
2014-12-02 20:29:29 +00:00
if (stcb->asoc.sb_cc == 0 &&
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->size_on_reasm_queue == 0 &&
asoc->size_on_all_streams == 0) {
/* Full rwnd granted */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
calc = max(SCTP_SB_LIMIT_RCV(stcb->sctp_socket), SCTP_MINIMAL_RWND);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (calc);
}
/* get actual space */
calc = (uint32_t) sctp_sbspace(&stcb->asoc, &stcb->sctp_socket->so_rcv);
/*
* take out what has NOT been put on socket queue and we yet hold
* for putting up.
*/
PR SCTP Bugs. Basically a full sized frame of PR SCTP FWD-TSN's would not be sent and thus cause a stalled connection. Also the rwnd Calculation was also off on the receiver side for PR-SCTP. MFC after: 1 month
2010-07-29 11:37:04 +00:00
calc = sctp_sbspace_sub(calc, (uint32_t) (asoc->size_on_reasm_queue +
asoc->cnt_on_reasm_queue * MSIZE));
calc = sctp_sbspace_sub(calc, (uint32_t) (asoc->size_on_all_streams +
asoc->cnt_on_all_streams * MSIZE));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (calc == 0) {
/* out of space */
return (calc);
}
/* what is the overhead of all these rwnd's */
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
calc = sctp_sbspace_sub(calc, stcb->asoc.my_rwnd_control_len);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
/*
* If the window gets too small due to ctrl-stuff, reduce it to 1,
* even it is 0. SWS engaged
*/
if (calc < stcb->asoc.my_rwnd_control_len) {
calc = 1;
}
return (calc);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/*
* Build out our readq entry based on the incoming packet.
*/
struct sctp_queued_to_read *
sctp_build_readq_entry(struct sctp_tcb *stcb,
struct sctp_nets *net,
uint32_t tsn, uint32_t ppid,
uint32_t context, uint16_t stream_no,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
uint32_t stream_seq, uint8_t flags,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct mbuf *dm)
{
struct sctp_queued_to_read *read_queue_e = NULL;
sctp_alloc_a_readq(stcb, read_queue_e);
if (read_queue_e == NULL) {
goto failed_build;
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
memset(read_queue_e, 0, sizeof(struct sctp_queued_to_read));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
read_queue_e->sinfo_stream = stream_no;
read_queue_e->sinfo_ssn = stream_seq;
read_queue_e->sinfo_flags = (flags << 8);
read_queue_e->sinfo_ppid = ppid;
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
read_queue_e->sinfo_context = context;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
read_queue_e->sinfo_tsn = tsn;
read_queue_e->sinfo_cumtsn = tsn;
read_queue_e->sinfo_assoc_id = sctp_get_associd(stcb);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
read_queue_e->top_fsn = read_queue_e->fsn_included = 0xffffffff;
TAILQ_INIT(&read_queue_e->reasm);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
read_queue_e->whoFrom = net;
atomic_add_int(&net->ref_count, 1);
read_queue_e->data = dm;
read_queue_e->stcb = stcb;
read_queue_e->port_from = stcb->rport;
failed_build:
return (read_queue_e);
}
struct mbuf *
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
sctp_build_ctl_nchunk(struct sctp_inpcb *inp, struct sctp_sndrcvinfo *sinfo)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
struct sctp_extrcvinfo *seinfo;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_sndrcvinfo *outinfo;
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
struct sctp_rcvinfo *rcvinfo;
struct sctp_nxtinfo *nxtinfo;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct cmsghdr *cmh;
struct mbuf *ret;
int len;
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
int use_extended;
int provide_nxt;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
if (sctp_is_feature_off(inp, SCTP_PCB_FLAGS_RECVDATAIOEVNT) &&
sctp_is_feature_off(inp, SCTP_PCB_FLAGS_RECVRCVINFO) &&
sctp_is_feature_off(inp, SCTP_PCB_FLAGS_RECVNXTINFO)) {
/* user does not want any ancillary data */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (NULL);
}
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
len = 0;
if (sctp_is_feature_on(inp, SCTP_PCB_FLAGS_RECVRCVINFO)) {
len += CMSG_SPACE(sizeof(struct sctp_rcvinfo));
}
seinfo = (struct sctp_extrcvinfo *)sinfo;
if (sctp_is_feature_on(inp, SCTP_PCB_FLAGS_RECVNXTINFO) &&
Fix typos in field names of struct sctp_extrcvinfo. Provide defines to allow applications to compile. Thanks to Jens Hoelscher for making me aware of the typos. MFC after: 1 week
2015-11-06 13:08:16 +00:00
(seinfo->serinfo_next_flags & SCTP_NEXT_MSG_AVAIL)) {
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
provide_nxt = 1;
Use the correct length. The wrong one was too large. MFC after: 3 days
2015-11-06 22:08:05 +00:00
len += CMSG_SPACE(sizeof(struct sctp_nxtinfo));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
provide_nxt = 0;
}
if (sctp_is_feature_on(inp, SCTP_PCB_FLAGS_RECVDATAIOEVNT)) {
if (sctp_is_feature_on(inp, SCTP_PCB_FLAGS_EXT_RCVINFO)) {
use_extended = 1;
len += CMSG_SPACE(sizeof(struct sctp_extrcvinfo));
} else {
use_extended = 0;
len += CMSG_SPACE(sizeof(struct sctp_sndrcvinfo));
}
} else {
use_extended = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
ret = sctp_get_mbuf_for_msg(len, 0, M_NOWAIT, 1, MT_DATA);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (ret == NULL) {
/* No space */
return (ret);
}
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
SCTP_BUF_LEN(ret) = 0;
/* We need a CMSG header followed by the struct */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
cmh = mtod(ret, struct cmsghdr *);
Initialize SCTP cmsg's and notification's buffer before copying out to userland. Submitted by: tuexen Security: CVE-2014-3953 Security: FreeBSD-SA-14:17.kmem
2014-07-08 21:54:27 +00:00
/*
* Make sure that there is no un-initialized padding between the
* cmsg header and cmsg data and after the cmsg data.
*/
memset(cmh, 0, len);
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
if (sctp_is_feature_on(inp, SCTP_PCB_FLAGS_RECVRCVINFO)) {
cmh->cmsg_level = IPPROTO_SCTP;
cmh->cmsg_len = CMSG_LEN(sizeof(struct sctp_rcvinfo));
cmh->cmsg_type = SCTP_RCVINFO;
rcvinfo = (struct sctp_rcvinfo *)CMSG_DATA(cmh);
rcvinfo->rcv_sid = sinfo->sinfo_stream;
rcvinfo->rcv_ssn = sinfo->sinfo_ssn;
rcvinfo->rcv_flags = sinfo->sinfo_flags;
rcvinfo->rcv_ppid = sinfo->sinfo_ppid;
rcvinfo->rcv_tsn = sinfo->sinfo_tsn;
rcvinfo->rcv_cumtsn = sinfo->sinfo_cumtsn;
rcvinfo->rcv_context = sinfo->sinfo_context;
rcvinfo->rcv_assoc_id = sinfo->sinfo_assoc_id;
cmh = (struct cmsghdr *)((caddr_t)cmh + CMSG_SPACE(sizeof(struct sctp_rcvinfo)));
SCTP_BUF_LEN(ret) += CMSG_SPACE(sizeof(struct sctp_rcvinfo));
}
if (provide_nxt) {
cmh->cmsg_level = IPPROTO_SCTP;
cmh->cmsg_len = CMSG_LEN(sizeof(struct sctp_nxtinfo));
cmh->cmsg_type = SCTP_NXTINFO;
nxtinfo = (struct sctp_nxtinfo *)CMSG_DATA(cmh);
Fix typos in field names of struct sctp_extrcvinfo. Provide defines to allow applications to compile. Thanks to Jens Hoelscher for making me aware of the typos. MFC after: 1 week
2015-11-06 13:08:16 +00:00
nxtinfo->nxt_sid = seinfo->serinfo_next_stream;
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
nxtinfo->nxt_flags = 0;
Fix typos in field names of struct sctp_extrcvinfo. Provide defines to allow applications to compile. Thanks to Jens Hoelscher for making me aware of the typos. MFC after: 1 week
2015-11-06 13:08:16 +00:00
if (seinfo->serinfo_next_flags & SCTP_NEXT_MSG_IS_UNORDERED) {
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
nxtinfo->nxt_flags |= SCTP_UNORDERED;
}
Fix typos in field names of struct sctp_extrcvinfo. Provide defines to allow applications to compile. Thanks to Jens Hoelscher for making me aware of the typos. MFC after: 1 week
2015-11-06 13:08:16 +00:00
if (seinfo->serinfo_next_flags & SCTP_NEXT_MSG_IS_NOTIFICATION) {
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
nxtinfo->nxt_flags |= SCTP_NOTIFICATION;
}
Fix typos in field names of struct sctp_extrcvinfo. Provide defines to allow applications to compile. Thanks to Jens Hoelscher for making me aware of the typos. MFC after: 1 week
2015-11-06 13:08:16 +00:00
if (seinfo->serinfo_next_flags & SCTP_NEXT_MSG_ISCOMPLETE) {
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
nxtinfo->nxt_flags |= SCTP_COMPLETE;
}
Fix typos in field names of struct sctp_extrcvinfo. Provide defines to allow applications to compile. Thanks to Jens Hoelscher for making me aware of the typos. MFC after: 1 week
2015-11-06 13:08:16 +00:00
nxtinfo->nxt_ppid = seinfo->serinfo_next_ppid;
nxtinfo->nxt_length = seinfo->serinfo_next_length;
nxtinfo->nxt_assoc_id = seinfo->serinfo_next_aid;
Add support for the newly added SCTP API. In particular add support for: * SCTP_SNDINFO, SCTP_PRINFO, SCTP_AUTHINFO, SCTP_DSTADDRV4, and SCTP_DSTADDRV6 cmsgs. * SCTP_NXTINFO and SCTP_RCVINFO cmgs. * SCTP_EVENT, SCTP_RECVRCVINFO, SCTP_RECVNXTINFO and SCTP_DEFAULT_SNDINFO socket option. * Special association ids (SCTP_FUTURE_ASSOC, ...) * sctp_recvv() and sctp_sendv() functions. MFC after: 1 month.
2011-06-15 23:50:27 +00:00
cmh = (struct cmsghdr *)((caddr_t)cmh + CMSG_SPACE(sizeof(struct sctp_nxtinfo)));
SCTP_BUF_LEN(ret) += CMSG_SPACE(sizeof(struct sctp_nxtinfo));
}
if (sctp_is_feature_on(inp, SCTP_PCB_FLAGS_RECVDATAIOEVNT)) {
cmh->cmsg_level = IPPROTO_SCTP;
outinfo = (struct sctp_sndrcvinfo *)CMSG_DATA(cmh);
if (use_extended) {
cmh->cmsg_len = CMSG_LEN(sizeof(struct sctp_extrcvinfo));
cmh->cmsg_type = SCTP_EXTRCV;
memcpy(outinfo, sinfo, sizeof(struct sctp_extrcvinfo));
SCTP_BUF_LEN(ret) += CMSG_SPACE(sizeof(struct sctp_extrcvinfo));
} else {
cmh->cmsg_len = CMSG_LEN(sizeof(struct sctp_sndrcvinfo));
cmh->cmsg_type = SCTP_SNDRCV;
*outinfo = *sinfo;
SCTP_BUF_LEN(ret) += CMSG_SPACE(sizeof(struct sctp_sndrcvinfo));
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
return (ret);
}
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
static void
sctp_mark_non_revokable(struct sctp_association *asoc, uint32_t tsn)
{
2 Bugs: 1) Only use both mapping arrays when NR sack is off. This way we can hold off moving the cumack (not the best but workable) when NR-sack is on. 2) We must make sure to just return on the move of the bit to the NR array if the cum-ack as already went past the TSN. This prevents marking a bit behind the array and hitting the invariant code that panic's us. MFC after: 1 week
2010-06-08 03:39:31 +00:00
uint32_t gap, i, cumackp1;
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
int fnd = 0;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
int in_r = 0, in_nr = 0;
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
if (SCTP_BASE_SYSCTL(sctp_do_drain) == 0) {
return;
}
2 Bugs: 1) Only use both mapping arrays when NR sack is off. This way we can hold off moving the cumack (not the best but workable) when NR-sack is on. 2) We must make sure to just return on the move of the bit to the NR array if the cum-ack as already went past the TSN. This prevents marking a bit behind the array and hitting the invariant code that panic's us. MFC after: 1 week
2010-06-08 03:39:31 +00:00
cumackp1 = asoc->cumulative_tsn + 1;
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(cumackp1, tsn)) {
2 Bugs: 1) Only use both mapping arrays when NR sack is off. This way we can hold off moving the cumack (not the best but workable) when NR-sack is on. 2) We must make sure to just return on the move of the bit to the NR array if the cum-ack as already went past the TSN. This prevents marking a bit behind the array and hitting the invariant code that panic's us. MFC after: 1 week
2010-06-08 03:39:31 +00:00
/*
* this tsn is behind the cum ack and thus we don't need to
* worry about it being moved from one to the other.
*/
return;
}
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
SCTP_CALC_TSN_TO_GAP(gap, tsn, asoc->mapping_array_base_tsn);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
in_r = SCTP_IS_TSN_PRESENT(asoc->mapping_array, gap);
in_nr = SCTP_IS_TSN_PRESENT(asoc->nr_mapping_array, gap);
if ((in_r == 0) && (in_nr == 0)) {
#ifdef INVARIANTS
panic("Things are really messed up now");
#else
Use SCTP_PRINTF() instead of printf() in all SCTP sources. MFC after: 3 days
2012-05-04 09:27:00 +00:00
SCTP_PRINTF("gap:%x tsn:%x\n", gap, tsn);
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
sctp_print_mapping_array(asoc);
#endif
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (in_nr == 0)
SCTP_SET_TSN_PRESENT(asoc->nr_mapping_array, gap);
if (in_r)
SCTP_UNSET_TSN_PRESENT(asoc->mapping_array, gap);
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tsn, asoc->highest_tsn_inside_nr_map)) {
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
asoc->highest_tsn_inside_nr_map = tsn;
}
if (tsn == asoc->highest_tsn_inside_map) {
/* We must back down to see what the new highest is */
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
for (i = tsn - 1; SCTP_TSN_GE(i, asoc->mapping_array_base_tsn); i--) {
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
SCTP_CALC_TSN_TO_GAP(gap, i, asoc->mapping_array_base_tsn);
if (SCTP_IS_TSN_PRESENT(asoc->mapping_array, gap)) {
asoc->highest_tsn_inside_map = i;
fnd = 1;
break;
}
}
if (!fnd) {
asoc->highest_tsn_inside_map = asoc->mapping_array_base_tsn - 1;
}
}
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
static int
sctp_place_control_in_stream(struct sctp_stream_in *strm,
struct sctp_association *asoc,
struct sctp_queued_to_read *control)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
struct sctp_queued_to_read *at;
struct sctp_readhead *q;
uint8_t bits, unordered;
bits = (control->sinfo_flags >> 8);
unordered = bits & SCTP_DATA_UNORDERED;
if (unordered) {
q = &strm->uno_inqueue;
if (asoc->idata_supported == 0) {
if (!TAILQ_EMPTY(q)) {
/*
* Only one stream can be here in old style
* -- abort
*/
return (-1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_INSERT_TAIL(q, control, next_instrm);
control->on_strm_q = SCTP_ON_UNORDERED;
return (0);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
} else {
q = &strm->inqueue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if ((bits & SCTP_DATA_NOT_FRAG) == SCTP_DATA_NOT_FRAG) {
control->end_added = control->last_frag_seen = control->first_frag_seen = 1;
}
if (TAILQ_EMPTY(q)) {
/* Empty queue */
TAILQ_INSERT_HEAD(q, control, next_instrm);
if (unordered) {
control->on_strm_q = SCTP_ON_UNORDERED;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control->on_strm_q = SCTP_ON_ORDERED;
}
return (0);
} else {
TAILQ_FOREACH(at, q, next_instrm) {
if (SCTP_TSN_GT(at->msg_id, control->msg_id)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* one in queue is bigger than the new one,
* insert before this one
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_INSERT_BEFORE(at, control, next_instrm);
if (unordered) {
control->on_strm_q = SCTP_ON_UNORDERED;
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
} else {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control->on_strm_q = SCTP_ON_ORDERED;
}
break;
} else if (at->msg_id == control->msg_id) {
/*
* Gak, He sent me a duplicate msg id
* number?? return -1 to abort.
*/
return (-1);
} else {
if (TAILQ_NEXT(at, next_instrm) == NULL) {
/*
* We are at the end, insert it
* after this one
*/
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_STR_LOGGING_ENABLE) {
sctp_log_strm_del(control, at,
SCTP_STR_LOG_FROM_INSERT_TL);
- send call has a reference to uio->uio_resid in the recent send code, but uio may be NULL on sendfile calls. Change to use sndlen variable. - EMSGSIZE is not being returned in non-blocking mode and needs a small tweak to look if the msg would ever fit when returning EWOULDBLOCK. - FWD-TSN has a bug in stream processing which could cause a panic. This is a follow on to the codenomicon fix. - PDAPI level 1 and 2 do not work unless the reader gets his returned buffer full. Fix so we can break out when at level 1 or 2. - Fix fast-handoff features to copy across properly on accepted sockets - Fix sctp_peeloff() system call when no true system call exists to screen arguments for errors. In cases where a real system call exists the system call itself does this. - Fix raddr leak in recent add-ip code change for bundled asconfs (even when non-bundled asconfs are received) - Make sure ipi_addr lock is held when walking global addr list. Need to change this lock type to a rwlock(). - Add don't wake flag on both input and output when the socket is closing. - When deleting an address verify the interface is correct before allowing the delete to process. This protects panda and unnumbered. - Clean up old sysctl stuff and get rid of the old Open/Net BSD structures. - Add a function to watch the ranges in the sysctl sets. - When appending in the reassembly queue, validate that the assoc has not gone to about to be freed. If so (in the middle) abort out. Note this especially effects MAC I think due to the lock/unlock they do (or with LOCK testing in place). - Netstat patch to get rid of warnings. - Make sure that no data gets queued to inactive/unconfirmed destinations. This especially effect CMT but also makes a impact on regular SCTP as well. - During init collision when we detect seq number out of sync we need to treat it like Case C and discard the cookie (no invarient needed here). - Atomic access to the random store. - When we declare a vtag good, we need to shove it into the time wait hash to prevent further use. When the tag is put into the assoc hash, we need to remove it from the twait hash (where it will surely be). This prevents duplicate tag assignments. - Move decr-ref count to better protect sysctl out of data. - ltrace error corrections in sctp6_usrreq.c - Add hook for interface up/down to be sent to us. - Make sysctl() exported structures independent of processor architecture. - Fix route and src addr cache clearing for delete address case. - Make sure address marked SCTP_DEL_IP_ADDRESS is never selected as src addr. - in icmp handling fixed so we actually look at the icmp codes to figure out what to do. - Modified mobility code. Reception of DELETE IP ADDRESS for a primary destination and SET PRIMARY for a new primary destination is used for retransmission trigger to the new primary destination. Also, in this case, destination of chunks in send_queue are changed to the new primary destination. - Fix so that we disallow sending by mbuf to ever have EEOR mode set upon it. Approved by: re@freebsd.org (B Mah)
2007-09-08 17:48:46 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_INSERT_AFTER(q,
at, control, next_instrm);
if (unordered) {
control->on_strm_q = SCTP_ON_UNORDERED;
} else {
control->on_strm_q = SCTP_ON_ORDERED;
- Make strict-sacks be the default. - Change it so that without INVARIANTs there are no panics in SCTP. - sctp_timer changes so that we have a recovery mechanism when the sent list is out of order.
2008-08-28 09:44:07 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
return (0);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
static void
sctp_abort_in_reasm(struct sctp_tcb *stcb,
struct sctp_queued_to_read *control,
struct sctp_tmit_chunk *chk,
int *abort_flag, int opspot)
{
char msg[SCTP_DIAG_INFO_LEN];
struct mbuf *oper;
if (stcb->asoc.idata_supported) {
snprintf(msg, sizeof(msg),
"Reass %x,CF:%x,TSN=%8.8x,SID=%4.4x,FSN=%8.8x,MID:%8.8x",
opspot,
control->fsn_included,
chk->rec.data.TSN_seq,
chk->rec.data.stream_number,
chk->rec.data.fsn_num, chk->rec.data.stream_seq);
} else {
snprintf(msg, sizeof(msg),
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
"Reass %x,CI:%x,TSN=%8.8x,SID=%4.4x,FSN=%4.4x,SSN:%4.4x",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
opspot,
control->fsn_included,
chk->rec.data.TSN_seq,
chk->rec.data.stream_number,
chk->rec.data.fsn_num,
(uint16_t) chk->rec.data.stream_seq);
}
oper = sctp_generate_cause(SCTP_CAUSE_PROTOCOL_VIOLATION, msg);
sctp_m_freem(chk->data);
chk->data = NULL;
sctp_free_a_chunk(stcb, chk, SCTP_SO_NOT_LOCKED);
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_1;
sctp_abort_an_association(stcb->sctp_ep, stcb, oper, SCTP_SO_NOT_LOCKED);
*abort_flag = 1;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
static void
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
sctp_clean_up_control(struct sctp_tcb *stcb, struct sctp_queued_to_read *control)
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
{
/*
* The control could not be placed and must be cleaned.
*/
struct sctp_tmit_chunk *chk, *nchk;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_FOREACH_SAFE(chk, &control->reasm, sctp_next, nchk) {
TAILQ_REMOVE(&control->reasm, chk, sctp_next);
if (chk->data)
sctp_m_freem(chk->data);
chk->data = NULL;
sctp_free_a_chunk(stcb, chk, SCTP_SO_NOT_LOCKED);
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
sctp_free_a_readq(stcb, control);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/*
* Queue the chunk either right into the socket buffer if it is the next one
* to go OR put it in the correct place in the delivery queue. If we do
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* append to the so_buf, keep doing so until we are out of order as
* long as the control's entered are non-fragmented.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
static void
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
sctp_queue_data_to_stream(struct sctp_tcb *stcb,
struct sctp_stream_in *strm,
struct sctp_association *asoc,
struct sctp_queued_to_read *control, int *abort_flag, int *need_reasm)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
/*
* FIX-ME maybe? What happens when the ssn wraps? If we are getting
* all the data in one stream this could happen quite rapidly. One
* could use the TSN to keep track of things, but this scheme breaks
netinet/sctp*: minor spelling fixes in comments. No functional change. Reviewed by: tuexen
2016-05-02 20:56:11 +00:00
* down in the other type of stream usage that could occur. Send a
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* single msg to stream 0, send 4Billion messages to stream 1, now
* send a message to stream 0. You have a situation where the TSN
* has wrapped but not in the stream. Is this worth worrying about
* or should we just change our queue sort at the bottom to be by
* TSN.
*
* Could it also be legal for a peer to send ssn 1 with TSN 2 and ssn 2
* with TSN 1? If the peer is doing some sort of funky TSN/SSN
* assignment this could happen... and I don't see how this would be
* a violation. So for now I am undecided an will leave the sort by
* SSN alone. Maybe a hybred approach is the answer
*
*/
struct sctp_queued_to_read *at;
int queue_needed;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
uint32_t nxt_todel;
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
struct mbuf *op_err;
char msg[SCTP_DIAG_INFO_LEN];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_STR_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_strm_del(control, NULL, SCTP_STR_LOG_FROM_INTO_STRD);
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (SCTP_MSGID_GT((!asoc->idata_supported), strm->last_sequence_delivered, control->sinfo_ssn)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* The incoming sseq is behind where we last delivered? */
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTPDBG(SCTP_DEBUG_INDATA1, "Duplicate S-SEQ: %u delivered: %u from peer, Abort association\n",
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
control->sinfo_ssn, strm->last_sequence_delivered);
Protection against errant sender sending a stream seq number out of order with no missing TSN's (a cisco box has this problem which will make a ssn be held forever). MFC after: 1 week
2008-04-14 14:34:29 +00:00
protocol_error:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* throw it in the stream so it gets cleaned up in
* association destruction
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_INSERT_HEAD(&strm->inqueue, control, next_instrm);
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
snprintf(msg, sizeof(msg), "Delivered SSN=%4.4x, got TSN=%8.8x, SID=%4.4x, SSN=%4.4x",
strm->last_sequence_delivered, control->sinfo_tsn,
control->sinfo_stream, control->sinfo_ssn);
op_err = sctp_generate_cause(SCTP_CAUSE_PROTOCOL_VIOLATION, msg);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_2;
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
sctp_abort_an_association(stcb->sctp_ep, stcb, op_err, SCTP_SO_NOT_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*abort_flag = 1;
return;
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if ((SCTP_TSN_GE(asoc->cumulative_tsn, control->sinfo_tsn)) && (asoc->idata_supported == 0)) {
goto protocol_error;
Improve locking on Mac OS X. This does not change the functionality on FreeBSD. Reviewed by: rrs MFC after: 1 week
2015-07-26 10:37:40 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
queue_needed = 1;
asoc->size_on_all_streams += control->length;
sctp_ucount_incr(asoc->cnt_on_all_streams);
nxt_todel = strm->last_sequence_delivered + 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (nxt_todel == control->sinfo_ssn) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
struct socket *so;
so = SCTP_INP_SO(stcb->sctp_ep);
atomic_add_int(&stcb->asoc.refcnt, 1);
SCTP_TCB_UNLOCK(stcb);
SCTP_SOCKET_LOCK(so, 1);
SCTP_TCB_LOCK(stcb);
atomic_subtract_int(&stcb->asoc.refcnt, 1);
if (stcb->sctp_ep->sctp_flags & SCTP_PCB_FLAGS_SOCKET_GONE) {
SCTP_SOCKET_UNLOCK(so, 1);
return;
}
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* can be delivered right away? */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_STR_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_strm_del(control, NULL, SCTP_STR_LOG_FROM_IMMED_DEL);
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
/* EY it wont be queued if it could be delivered directly */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
queue_needed = 0;
asoc->size_on_all_streams -= control->length;
sctp_ucount_decr(asoc->cnt_on_all_streams);
strm->last_sequence_delivered++;
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
sctp_mark_non_revokable(asoc, control->sinfo_tsn);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_add_to_readq(stcb->sctp_ep, stcb,
control,
Turns out that when a receiver forwards through its TNS's the processing code holds the read lock (when processing a FWD-TSN for pr-sctp). If it finds stranded data that can be given to the application, it calls sctp_add_to_readq(). The readq function also grabs this lock. So if INVAR is on we get a double recurse on a non-recursive lock and panic. This fix will change it so that readq() function gets a flag to tell if the lock is held, if so then it does not get the lock. Approved by: re@freebsd.org (Kostik Belousov) MFC after: 1 week
2009-07-28 14:09:06 +00:00
&stcb->sctp_socket->so_rcv, 1,
Fix a locking bug which only shows up on Mac OS X. MFC after: 1 week
2016-05-14 13:44:49 +00:00
SCTP_READ_LOCK_NOT_HELD, SCTP_SO_LOCKED);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_FOREACH_SAFE(control, &strm->inqueue, next_instrm, at) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* all delivered */
nxt_todel = strm->last_sequence_delivered + 1;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if ((nxt_todel == control->sinfo_ssn) &&
(((control->sinfo_flags >> 8) & SCTP_DATA_NOT_FRAG) == SCTP_DATA_NOT_FRAG)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->size_on_all_streams -= control->length;
sctp_ucount_decr(asoc->cnt_on_all_streams);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (control->on_strm_q == SCTP_ON_ORDERED) {
TAILQ_REMOVE(&strm->inqueue, control, next_instrm);
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#ifdef INVARIANTS
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
} else {
Cleanup debug output.
2016-04-18 06:58:07 +00:00
panic("Huh control: %p is on_strm_q: %d",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control, control->on_strm_q);
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#endif
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
control->on_strm_q = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
strm->last_sequence_delivered++;
/*
* We ignore the return of deliver_data here
* since we always can hold the chunk on the
* d-queue. And we have a finite number that
* can be delivered from the strq.
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_STR_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_strm_del(control, NULL,
SCTP_STR_LOG_FROM_IMMED_DEL);
}
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
sctp_mark_non_revokable(asoc, control->sinfo_tsn);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_add_to_readq(stcb->sctp_ep, stcb,
control,
Turns out that when a receiver forwards through its TNS's the processing code holds the read lock (when processing a FWD-TSN for pr-sctp). If it finds stranded data that can be given to the application, it calls sctp_add_to_readq(). The readq function also grabs this lock. So if INVAR is on we get a double recurse on a non-recursive lock and panic. This fix will change it so that readq() function gets a flag to tell if the lock is held, if so then it does not get the lock. Approved by: re@freebsd.org (Kostik Belousov) MFC after: 1 week
2009-07-28 14:09:06 +00:00
&stcb->sctp_socket->so_rcv, 1,
SCTP_READ_LOCK_NOT_HELD,
Fix a locking bug which only shows up on Mac OS X. MFC after: 1 week
2016-05-14 13:44:49 +00:00
SCTP_SO_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
} else if (nxt_todel == control->sinfo_ssn) {
*need_reasm = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
break;
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
SCTP_SOCKET_UNLOCK(so, 1);
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
if (queue_needed) {
/*
* Ok, we did not deliver this guy, find the correct place
* to put it on the queue.
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (sctp_place_control_in_stream(strm, asoc, control)) {
snprintf(msg, sizeof(msg),
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"Queue to str msg_id: %u duplicate",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control->msg_id);
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
sctp_clean_up_control(stcb, control);
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
op_err = sctp_generate_cause(SCTP_CAUSE_PROTOCOL_VIOLATION, msg);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_3;
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_abort_an_association(stcb->sctp_ep, stcb, op_err, SCTP_SO_NOT_LOCKED);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
*abort_flag = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
static void
sctp_setup_tail_pointer(struct sctp_queued_to_read *control)
{
struct mbuf *m, *prev = NULL;
struct sctp_tcb *stcb;
stcb = control->stcb;
control->held_length = 0;
control->length = 0;
m = control->data;
while (m) {
if (SCTP_BUF_LEN(m) == 0) {
/* Skip mbufs with NO length */
if (prev == NULL) {
/* First one */
control->data = sctp_m_free(m);
m = control->data;
} else {
SCTP_BUF_NEXT(prev) = sctp_m_free(m);
m = SCTP_BUF_NEXT(prev);
}
if (m == NULL) {
control->tail_mbuf = prev;
}
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
prev = m;
atomic_add_int(&control->length, SCTP_BUF_LEN(m));
if (control->on_read_q) {
/*
* On read queue so we must increment the SB stuff,
* we assume caller has done any locks of SB.
*/
sctp_sballoc(stcb, &stcb->sctp_socket->so_rcv, m);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
m = SCTP_BUF_NEXT(m);
}
if (prev) {
control->tail_mbuf = prev;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
static void
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
sctp_add_to_tail_pointer(struct sctp_queued_to_read *control, struct mbuf *m)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
struct mbuf *prev = NULL;
struct sctp_tcb *stcb;
stcb = control->stcb;
if (stcb == NULL) {
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#ifdef INVARIANTS
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
panic("Control broken");
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#else
return;
#endif
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
if (control->tail_mbuf == NULL) {
/* TSNH */
control->data = m;
sctp_setup_tail_pointer(control);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control->tail_mbuf->m_next = m;
while (m) {
if (SCTP_BUF_LEN(m) == 0) {
/* Skip mbufs with NO length */
if (prev == NULL) {
/* First one */
control->tail_mbuf->m_next = sctp_m_free(m);
m = control->tail_mbuf->m_next;
* Fix a bug where PR-SCTP settings are ignore when using implicit association setup. * Fix a bug where message with illegal stream ids are not deleted. * Fix a crash when reporting back unsent messages from the send_queue. * Fix a bug related to INIT retransmission when the socket is already closed. * Fix a bug where associations were stalled when partial delivery API was enabled. * Fix a bug where the receive buffer size was smaller than the partial_delivery_point. Approved by: re, rrs (mentor) MFC after: One day.
2009-08-15 21:10:52 +00:00
} else {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
SCTP_BUF_NEXT(prev) = sctp_m_free(m);
m = SCTP_BUF_NEXT(prev);
* Fix a bug where PR-SCTP settings are ignore when using implicit association setup. * Fix a bug where message with illegal stream ids are not deleted. * Fix a crash when reporting back unsent messages from the send_queue. * Fix a bug related to INIT retransmission when the socket is already closed. * Fix a bug where associations were stalled when partial delivery API was enabled. * Fix a bug where the receive buffer size was smaller than the partial_delivery_point. Approved by: re, rrs (mentor) MFC after: One day.
2009-08-15 21:10:52 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (m == NULL) {
control->tail_mbuf = prev;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
prev = m;
if (control->on_read_q) {
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
/*
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* On read queue so we must increment the SB stuff,
* we assume caller has done any locks of SB.
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
sctp_sballoc(stcb, &stcb->sctp_socket->so_rcv, m);
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
atomic_add_int(&control->length, SCTP_BUF_LEN(m));
m = SCTP_BUF_NEXT(m);
}
if (prev) {
control->tail_mbuf = prev;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
static void
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
sctp_build_readq_entry_from_ctl(struct sctp_queued_to_read *nc, struct sctp_queued_to_read *control)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
memset(nc, 0, sizeof(struct sctp_queued_to_read));
nc->sinfo_stream = control->sinfo_stream;
nc->sinfo_ssn = control->sinfo_ssn;
TAILQ_INIT(&nc->reasm);
nc->top_fsn = control->top_fsn;
nc->msg_id = control->msg_id;
nc->sinfo_flags = control->sinfo_flags;
nc->sinfo_ppid = control->sinfo_ppid;
nc->sinfo_context = control->sinfo_context;
nc->fsn_included = 0xffffffff;
nc->sinfo_tsn = control->sinfo_tsn;
nc->sinfo_cumtsn = control->sinfo_cumtsn;
nc->sinfo_assoc_id = control->sinfo_assoc_id;
nc->whoFrom = control->whoFrom;
atomic_add_int(&nc->whoFrom->ref_count, 1);
nc->stcb = control->stcb;
nc->port_from = control->port_from;
}
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
static void
sctp_reset_a_control(struct sctp_queued_to_read *control,
struct sctp_inpcb *inp, uint32_t tsn)
{
control->fsn_included = tsn;
if (control->on_read_q) {
/*
* We have to purge it from there, hopefully this will work
* :-)
*/
TAILQ_REMOVE(&inp->read_queue, control, next);
control->on_read_q = 0;
}
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
static int
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
sctp_handle_old_unordered_data(struct sctp_tcb *stcb,
struct sctp_association *asoc,
struct sctp_stream_in *strm,
struct sctp_queued_to_read *control,
uint32_t pd_point,
int inp_read_lock_held)
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
{
/*
* Special handling for the old un-ordered data chunk. All the
* chunks/TSN's go to msg_id 0. So we have to do the old style
* watching to see if we have it all. If you return one, no other
* control entries on the un-ordered queue will be looked at. In
* theory there should be no others entries in reality, unless the
* guy is sending both unordered NDATA and unordered DATA...
*/
struct sctp_tmit_chunk *chk, *lchk, *tchk;
uint32_t fsn;
Deal with a portential memory allocation failure, which was reported by the clang static code analyzer. Joint work with rrs@. MFC after: 3 days
2016-07-16 12:25:37 +00:00
struct sctp_queued_to_read *nc;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
int cnt_added;
if (control->first_frag_seen == 0) {
/* Nothing we can do, we have not seen the first piece yet */
return (1);
}
/* Collapse any we can */
cnt_added = 0;
restart:
fsn = control->fsn_included + 1;
/* Now what can we add? */
TAILQ_FOREACH_SAFE(chk, &control->reasm, sctp_next, lchk) {
if (chk->rec.data.fsn_num == fsn) {
/* Ok lets add it */
Deal with a portential memory allocation failure, which was reported by the clang static code analyzer. Joint work with rrs@. MFC after: 3 days
2016-07-16 12:25:37 +00:00
sctp_alloc_a_readq(stcb, nc);
if (nc == NULL) {
break;
}
memset(nc, 0, sizeof(struct sctp_queued_to_read));
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_REMOVE(&control->reasm, chk, sctp_next);
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
sctp_add_chk_to_control(control, strm, stcb, asoc, chk, SCTP_READ_LOCK_NOT_HELD);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
fsn++;
cnt_added++;
chk = NULL;
if (control->end_added) {
/* We are done */
if (!TAILQ_EMPTY(&control->reasm)) {
/*
* Ok we have to move anything left
* on the control queue to a new
* control.
*/
sctp_build_readq_entry_from_ctl(nc, control);
tchk = TAILQ_FIRST(&control->reasm);
if (tchk->rec.data.rcv_flags & SCTP_DATA_FIRST_FRAG) {
TAILQ_REMOVE(&control->reasm, tchk, sctp_next);
Fix the handling of unordered fragmented user messages using DATA chunks. There were two bugs: * There was an accounting bug resulting in reporting a too small a_rwnd. * There are a bug when abandoning messages in the reassembly queue. MFC after: 4 weeks
2016-09-21 08:28:18 +00:00
asoc->size_on_reasm_queue -= tchk->send_size;
sctp_ucount_decr(asoc->cnt_on_reasm_queue);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
nc->first_frag_seen = 1;
nc->fsn_included = tchk->rec.data.fsn_num;
nc->data = tchk->data;
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
nc->sinfo_ppid = tchk->rec.data.payloadtype;
nc->sinfo_tsn = tchk->rec.data.TSN_seq;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
sctp_mark_non_revokable(asoc, tchk->rec.data.TSN_seq);
tchk->data = NULL;
sctp_free_a_chunk(stcb, tchk, SCTP_SO_NOT_LOCKED);
sctp_setup_tail_pointer(nc);
tchk = TAILQ_FIRST(&control->reasm);
}
/* Spin the rest onto the queue */
while (tchk) {
TAILQ_REMOVE(&control->reasm, tchk, sctp_next);
TAILQ_INSERT_TAIL(&nc->reasm, tchk, sctp_next);
tchk = TAILQ_FIRST(&control->reasm);
}
/*
* Now lets add it to the queue
* after removing control
*/
TAILQ_INSERT_TAIL(&strm->uno_inqueue, nc, next_instrm);
nc->on_strm_q = SCTP_ON_UNORDERED;
if (control->on_strm_q) {
TAILQ_REMOVE(&strm->uno_inqueue, control, next_instrm);
control->on_strm_q = 0;
}
}
if (control->pdapi_started) {
strm->pd_api_started = 0;
control->pdapi_started = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (control->on_strm_q) {
TAILQ_REMOVE(&strm->uno_inqueue, control, next_instrm);
control->on_strm_q = 0;
Add missing sctps_reasmusrmsgs counter. Joint work with rrs@. MFC after: 3 days
2016-07-17 08:31:21 +00:00
SCTP_STAT_INCR_COUNTER64(sctps_reasmusrmsgs);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
if (control->on_read_q == 0) {
sctp_add_to_readq(stcb->sctp_ep, stcb, control,
&stcb->sctp_socket->so_rcv, control->end_added,
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
inp_read_lock_held, SCTP_SO_NOT_LOCKED);
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
}
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_wakeup_the_read_socket(stcb->sctp_ep, stcb, SCTP_SO_NOT_LOCKED);
Use correct order of conditions to avoid NULL deref. MFC after: 3 days X-MFC with: r302935
2016-07-19 11:16:44 +00:00
if ((nc->first_frag_seen) && !TAILQ_EMPTY(&nc->reasm)) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/*
* Switch to the new guy and
* continue
*/
control = nc;
goto restart;
Deal with a portential memory allocation failure, which was reported by the clang static code analyzer. Joint work with rrs@. MFC after: 3 days
2016-07-16 12:25:37 +00:00
} else {
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
if (nc->on_strm_q == 0) {
sctp_free_a_readq(stcb, nc);
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
return (1);
Deal with a portential memory allocation failure, which was reported by the clang static code analyzer. Joint work with rrs@. MFC after: 3 days
2016-07-16 12:25:37 +00:00
} else {
sctp_free_a_readq(stcb, nc);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
} else {
/* Can't add more */
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
if ((control->length > pd_point) && (strm->pd_api_started == 0)) {
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
strm->pd_api_started = 1;
control->pdapi_started = 1;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
sctp_add_to_readq(stcb->sctp_ep, stcb, control,
&stcb->sctp_socket->so_rcv, control->end_added,
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
inp_read_lock_held, SCTP_SO_NOT_LOCKED);
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_wakeup_the_read_socket(stcb->sctp_ep, stcb, SCTP_SO_NOT_LOCKED);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
return (0);
} else {
return (1);
}
}
static void
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
sctp_inject_old_unordered_data(struct sctp_tcb *stcb,
struct sctp_association *asoc,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
struct sctp_queued_to_read *control,
struct sctp_tmit_chunk *chk,
int *abort_flag)
{
struct sctp_tmit_chunk *at;
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
int inserted;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/*
* Here we need to place the chunk into the control structure sorted
* in the correct order.
*/
if (chk->rec.data.rcv_flags & SCTP_DATA_FIRST_FRAG) {
/* Its the very first one. */
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"chunk is a first fsn: %u becomes fsn_included\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk->rec.data.fsn_num);
if (control->first_frag_seen) {
/*
* In old un-ordered we can reassembly on one
* control multiple messages. As long as the next
* FIRST is greater then the old first (TSN i.e. FSN
* wise)
*/
struct mbuf *tdata;
uint32_t tmp;
if (SCTP_TSN_GT(chk->rec.data.fsn_num, control->fsn_included)) {
/*
* Easy way the start of a new guy beyond
* the lowest
*/
goto place_chunk;
}
if ((chk->rec.data.fsn_num == control->fsn_included) ||
(control->pdapi_started)) {
/*
* Ok this should not happen, if it does we
* started the pd-api on the higher TSN
* (since the equals part is a TSN failure
* it must be that).
*
* We are completly hosed in that case since I
* have no way to recover. This really will
* only happen if we can get more TSN's
* higher before the pd-api-point.
*/
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_abort_in_reasm(stcb, control, chk,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
abort_flag,
SCTP_FROM_SCTP_INDATA + SCTP_LOC_4);
return;
}
/*
* Ok we have two firsts and the one we just got is
* smaller than the one we previously placed.. yuck!
* We must swap them out.
*/
/* swap the mbufs */
tdata = control->data;
control->data = chk->data;
chk->data = tdata;
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
/* Save the lengths */
chk->send_size = control->length;
/* Recompute length of control and tail pointer */
sctp_setup_tail_pointer(control);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/* Fix the FSN included */
tmp = control->fsn_included;
control->fsn_included = chk->rec.data.fsn_num;
chk->rec.data.fsn_num = tmp;
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
/* Fix the TSN included */
tmp = control->sinfo_tsn;
control->sinfo_tsn = chk->rec.data.TSN_seq;
chk->rec.data.TSN_seq = tmp;
/* Fix the PPID included */
tmp = control->sinfo_ppid;
control->sinfo_ppid = chk->rec.data.payloadtype;
chk->rec.data.payloadtype = tmp;
/* Fix tail pointer */
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
goto place_chunk;
}
control->first_frag_seen = 1;
control->top_fsn = control->fsn_included = chk->rec.data.fsn_num;
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
control->sinfo_tsn = chk->rec.data.TSN_seq;
control->sinfo_ppid = chk->rec.data.payloadtype;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control->data = chk->data;
sctp_mark_non_revokable(asoc, chk->rec.data.TSN_seq);
chk->data = NULL;
sctp_free_a_chunk(stcb, chk, SCTP_SO_NOT_LOCKED);
sctp_setup_tail_pointer(control);
return;
}
place_chunk:
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
inserted = 0;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_FOREACH(at, &control->reasm, sctp_next) {
if (SCTP_TSN_GT(at->rec.data.fsn_num, chk->rec.data.fsn_num)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* This one in queue is bigger than the new one,
* insert the new one before at.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
asoc->size_on_reasm_queue += chk->send_size;
sctp_ucount_incr(asoc->cnt_on_reasm_queue);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
inserted = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_INSERT_BEFORE(at, chk, sctp_next);
break;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
} else if (at->rec.data.fsn_num == chk->rec.data.fsn_num) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* They sent a duplicate fsn number. This really
* should not happen since the FSN is a TSN and it
* should have been dropped earlier.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_abort_in_reasm(stcb, control, chk,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
abort_flag,
SCTP_FROM_SCTP_INDATA + SCTP_LOC_5);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
}
if (inserted == 0) {
/* Its at the end */
asoc->size_on_reasm_queue += chk->send_size;
sctp_ucount_incr(asoc->cnt_on_reasm_queue);
control->top_fsn = chk->rec.data.fsn_num;
TAILQ_INSERT_TAIL(&control->reasm, chk, sctp_next);
}
}
static int
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
sctp_deliver_reasm_check(struct sctp_tcb *stcb, struct sctp_association *asoc,
struct sctp_stream_in *strm, int inp_read_lock_held)
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
{
/*
* Given a stream, strm, see if any of the SSN's on it that are
* fragmented are ready to deliver. If so go ahead and place them on
* the read queue. In so placing if we have hit the end, then we
* need to remove them from the stream's queue.
*/
struct sctp_queued_to_read *control, *nctl = NULL;
uint32_t next_to_del;
uint32_t pd_point;
int ret = 0;
if (stcb->sctp_socket) {
pd_point = min(SCTP_SB_LIMIT_RCV(stcb->sctp_socket) >> SCTP_PARTIAL_DELIVERY_SHIFT,
stcb->sctp_ep->partial_delivery_point);
} else {
pd_point = stcb->sctp_ep->partial_delivery_point;
}
control = TAILQ_FIRST(&strm->uno_inqueue);
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if ((control) &&
(asoc->idata_supported == 0)) {
/* Special handling needed for "old" data format */
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
if (sctp_handle_old_unordered_data(stcb, asoc, strm, control, pd_point, inp_read_lock_held)) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
goto done_un;
}
}
if (strm->pd_api_started) {
/* Can't add more */
return (0);
}
while (control) {
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTPDBG(SCTP_DEBUG_XXX, "Looking at control: %p e(%d) ssn: %u top_fsn: %u inc_fsn: %u -uo\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control, control->end_added, control->sinfo_ssn, control->top_fsn, control->fsn_included);
nctl = TAILQ_NEXT(control, next_instrm);
if (control->end_added) {
/* We just put the last bit on */
if (control->on_strm_q) {
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#ifdef INVARIANTS
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (control->on_strm_q != SCTP_ON_UNORDERED) {
Cleanup debug output.
2016-04-18 06:58:07 +00:00
panic("Huh control: %p on_q: %d -- not unordered?",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control, control->on_strm_q);
}
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#endif
Add missing sctps_reasmusrmsgs counter. Joint work with rrs@. MFC after: 3 days
2016-07-17 08:31:21 +00:00
SCTP_STAT_INCR_COUNTER64(sctps_reasmusrmsgs);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_REMOVE(&strm->uno_inqueue, control, next_instrm);
control->on_strm_q = 0;
}
if (control->on_read_q == 0) {
sctp_add_to_readq(stcb->sctp_ep, stcb,
control,
&stcb->sctp_socket->so_rcv, control->end_added,
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
inp_read_lock_held, SCTP_SO_NOT_LOCKED);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/* Can we do a PD-API for this un-ordered guy? */
if ((control->length >= pd_point) && (strm->pd_api_started == 0)) {
strm->pd_api_started = 1;
control->pdapi_started = 1;
sctp_add_to_readq(stcb->sctp_ep, stcb,
control,
&stcb->sctp_socket->so_rcv, control->end_added,
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
inp_read_lock_held, SCTP_SO_NOT_LOCKED);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
break;
}
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control = nctl;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
done_un:
control = TAILQ_FIRST(&strm->inqueue);
if (strm->pd_api_started) {
/* Can't add more */
return (0);
}
if (control == NULL) {
return (ret);
}
if (strm->last_sequence_delivered == control->sinfo_ssn) {
/*
* Ok the guy at the top was being partially delivered
* completed, so we remove it. Note the pd_api flag was
* taken off when the chunk was merged on in
* sctp_queue_data_for_reasm below.
*/
nctl = TAILQ_NEXT(control, next_instrm);
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"Looking at control: %p e(%d) ssn: %u top_fsn: %u inc_fsn: %u (lastdel: %u)- o\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control, control->end_added, control->sinfo_ssn,
control->top_fsn, control->fsn_included,
strm->last_sequence_delivered);
if (control->end_added) {
if (control->on_strm_q) {
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#ifdef INVARIANTS
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (control->on_strm_q != SCTP_ON_ORDERED) {
Cleanup debug output.
2016-04-18 06:58:07 +00:00
panic("Huh control: %p on_q: %d -- not ordered?",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control, control->on_strm_q);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#endif
Add missing sctps_reasmusrmsgs counter. Joint work with rrs@. MFC after: 3 days
2016-07-17 08:31:21 +00:00
SCTP_STAT_INCR_COUNTER64(sctps_reasmusrmsgs);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_REMOVE(&strm->inqueue, control, next_instrm);
control->on_strm_q = 0;
}
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
if (strm->pd_api_started && control->pdapi_started) {
control->pdapi_started = 0;
strm->pd_api_started = 0;
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (control->on_read_q == 0) {
sctp_add_to_readq(stcb->sctp_ep, stcb,
control,
&stcb->sctp_socket->so_rcv, control->end_added,
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
inp_read_lock_held, SCTP_SO_NOT_LOCKED);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
control = nctl;
}
}
if (strm->pd_api_started) {
/*
* Can't add more must have gotten an un-ordered above being
* partially delivered.
*/
return (0);
}
deliver_more:
next_to_del = strm->last_sequence_delivered + 1;
if (control) {
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"Looking at control: %p e(%d) ssn: %u top_fsn: %u inc_fsn: %u (nxtdel: %u)- o\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control, control->end_added, control->sinfo_ssn, control->top_fsn, control->fsn_included,
next_to_del);
nctl = TAILQ_NEXT(control, next_instrm);
if ((control->sinfo_ssn == next_to_del) &&
(control->first_frag_seen)) {
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
int done;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/* Ok we can deliver it onto the stream. */
if (control->end_added) {
/* We are done with it afterwards */
if (control->on_strm_q) {
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#ifdef INVARIANTS
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (control->on_strm_q != SCTP_ON_ORDERED) {
Cleanup debug output.
2016-04-18 06:58:07 +00:00
panic("Huh control: %p on_q: %d -- not ordered?",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control, control->on_strm_q);
}
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#endif
Add missing sctps_reasmusrmsgs counter. Joint work with rrs@. MFC after: 3 days
2016-07-17 08:31:21 +00:00
SCTP_STAT_INCR_COUNTER64(sctps_reasmusrmsgs);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_REMOVE(&strm->inqueue, control, next_instrm);
control->on_strm_q = 0;
Add consistency checks to ensure that fragments of a user message have the same U-bit. MFC after: 3 days
2014-04-20 21:11:39 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
ret++;
}
if (((control->sinfo_flags >> 8) & SCTP_DATA_NOT_FRAG) == SCTP_DATA_NOT_FRAG) {
/*
* A singleton now slipping through - mark
* it non-revokable too
*/
sctp_mark_non_revokable(asoc, control->sinfo_tsn);
} else if (control->end_added == 0) {
/*
* Check if we can defer adding until its
* all there
*/
if ((control->length < pd_point) || (strm->pd_api_started)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* Don't need it or cannot add more
* (one being delivered that way)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
goto out;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
done = (control->end_added) && (control->last_frag_seen);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (control->on_read_q == 0) {
sctp_add_to_readq(stcb->sctp_ep, stcb,
control,
&stcb->sctp_socket->so_rcv, control->end_added,
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
inp_read_lock_held, SCTP_SO_NOT_LOCKED);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
strm->last_sequence_delivered = next_to_del;
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
if (done) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control = nctl;
goto deliver_more;
} else {
/* We are now doing PD API */
strm->pd_api_started = 1;
control->pdapi_started = 1;
}
}
}
out:
return (ret);
}
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
void
sctp_add_chk_to_control(struct sctp_queued_to_read *control,
struct sctp_stream_in *strm,
struct sctp_tcb *stcb, struct sctp_association *asoc,
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
struct sctp_tmit_chunk *chk, int hold_rlock)
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
{
/*
* Given a control and a chunk, merge the data from the chk onto the
* control and free up the chunk resources.
*/
int i_locked = 0;
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
if (control->on_read_q && (hold_rlock == 0)) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/*
* Its being pd-api'd so we must do some locks.
*/
SCTP_INP_READ_LOCK(stcb->sctp_ep);
i_locked = 1;
}
if (control->data == NULL) {
control->data = chk->data;
sctp_setup_tail_pointer(control);
} else {
sctp_add_to_tail_pointer(control, chk->data);
}
control->fsn_included = chk->rec.data.fsn_num;
asoc->size_on_reasm_queue -= chk->send_size;
sctp_ucount_decr(asoc->cnt_on_reasm_queue);
sctp_mark_non_revokable(asoc, chk->rec.data.TSN_seq);
chk->data = NULL;
if (chk->rec.data.rcv_flags & SCTP_DATA_FIRST_FRAG) {
control->first_frag_seen = 1;
}
if (chk->rec.data.rcv_flags & SCTP_DATA_LAST_FRAG) {
/* Its complete */
if ((control->on_strm_q) && (control->on_read_q)) {
if (control->pdapi_started) {
control->pdapi_started = 0;
strm->pd_api_started = 0;
}
if (control->on_strm_q == SCTP_ON_UNORDERED) {
/* Unordered */
TAILQ_REMOVE(&strm->uno_inqueue, control, next_instrm);
control->on_strm_q = 0;
} else if (control->on_strm_q == SCTP_ON_ORDERED) {
/* Ordered */
TAILQ_REMOVE(&strm->inqueue, control, next_instrm);
control->on_strm_q = 0;
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#ifdef INVARIANTS
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
} else if (control->on_strm_q) {
Cleanup debug output.
2016-04-18 06:58:07 +00:00
panic("Unknown state on ctrl: %p on_strm_q: %d", control,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control->on_strm_q);
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#endif
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control->end_added = 1;
control->last_frag_seen = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (i_locked) {
SCTP_INP_READ_UNLOCK(stcb->sctp_ep);
}
sctp_free_a_chunk(stcb, chk, SCTP_SO_NOT_LOCKED);
}
/*
* Dump onto the re-assembly queue, in its proper place. After dumping on the
* queue, see if anthing can be delivered. If so pull it off (or as much as
* we can. If we run out of space then we must dump what we can and set the
* appropriate flag to say we queued what we could.
*/
static void
sctp_queue_data_for_reasm(struct sctp_tcb *stcb, struct sctp_association *asoc,
struct sctp_stream_in *strm,
struct sctp_queued_to_read *control,
struct sctp_tmit_chunk *chk,
int created_control,
int *abort_flag, uint32_t tsn)
{
uint32_t next_fsn;
struct sctp_tmit_chunk *at, *nat;
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
int do_wakeup, unordered;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/*
* For old un-ordered data chunks.
*/
if ((control->sinfo_flags >> 8) & SCTP_DATA_UNORDERED) {
unordered = 1;
} else {
unordered = 0;
}
/* Must be added to the stream-in queue */
if (created_control) {
if (sctp_place_control_in_stream(strm, asoc, control)) {
/* Duplicate SSN? */
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
sctp_clean_up_control(stcb, control);
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_abort_in_reasm(stcb, control, chk,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
abort_flag,
SCTP_FROM_SCTP_INDATA + SCTP_LOC_6);
return;
}
if ((tsn == (asoc->cumulative_tsn + 1) && (asoc->idata_supported == 0))) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* Ok we created this control and now lets validate
* that its legal i.e. there is a B bit set, if not
* and we have up to the cum-ack then its invalid.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if ((chk->rec.data.rcv_flags & SCTP_DATA_FIRST_FRAG) == 0) {
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_abort_in_reasm(stcb, control, chk,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
abort_flag,
SCTP_FROM_SCTP_INDATA + SCTP_LOC_7);
return;
}
}
}
Fix a warning about an unused variable.
2016-04-18 09:39:46 +00:00
if ((asoc->idata_supported == 0) && (unordered == 1)) {
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
sctp_inject_old_unordered_data(stcb, asoc, control, chk, abort_flag);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
return;
}
/*
* Ok we must queue the chunk into the reasembly portion: o if its
* the first it goes to the control mbuf. o if its not first but the
* next in sequence it goes to the control, and each succeeding one
* in order also goes. o if its not in order we place it on the list
* in its place.
*/
if (chk->rec.data.rcv_flags & SCTP_DATA_FIRST_FRAG) {
/* Its the very first one. */
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"chunk is a first fsn: %u becomes fsn_included\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk->rec.data.fsn_num);
if (control->first_frag_seen) {
/*
* Error on senders part, they either sent us two
* data chunks with FIRST, or they sent two
* un-ordered chunks that were fragmented at the
* same time in the same stream.
*/
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_abort_in_reasm(stcb, control, chk,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
abort_flag,
SCTP_FROM_SCTP_INDATA + SCTP_LOC_8);
return;
}
control->first_frag_seen = 1;
control->fsn_included = chk->rec.data.fsn_num;
control->data = chk->data;
sctp_mark_non_revokable(asoc, chk->rec.data.TSN_seq);
chk->data = NULL;
sctp_free_a_chunk(stcb, chk, SCTP_SO_NOT_LOCKED);
sctp_setup_tail_pointer(control);
} else {
/* Place the chunk in our list */
int inserted = 0;
if (control->last_frag_seen == 0) {
/* Still willing to raise highest FSN seen */
if (SCTP_TSN_GT(chk->rec.data.fsn_num, control->top_fsn)) {
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"We have a new top_fsn: %u\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk->rec.data.fsn_num);
control->top_fsn = chk->rec.data.fsn_num;
}
if (chk->rec.data.rcv_flags & SCTP_DATA_LAST_FRAG) {
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"The last fsn is now in place fsn: %u\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk->rec.data.fsn_num);
control->last_frag_seen = 1;
}
if (asoc->idata_supported || control->first_frag_seen) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* For IDATA we always check since we know
* that the first fragment is 0. For old
* DATA we have to receive the first before
netinet/sctp*: minor spelling fixes in comments. No functional change. Reviewed by: tuexen
2016-05-02 20:56:11 +00:00
* we know the first FSN (which is the TSN).
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (SCTP_TSN_GE(control->fsn_included, chk->rec.data.fsn_num)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* We have already delivered up to
* this so its a dup
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_abort_in_reasm(stcb, control, chk,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
abort_flag,
SCTP_FROM_SCTP_INDATA + SCTP_LOC_9);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
} else {
if (chk->rec.data.rcv_flags & SCTP_DATA_LAST_FRAG) {
/* Second last? huh? */
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"Duplicate last fsn: %u (top: %u) -- abort\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk->rec.data.fsn_num, control->top_fsn);
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_abort_in_reasm(stcb, control,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk, abort_flag,
SCTP_FROM_SCTP_INDATA + SCTP_LOC_10);
return;
}
if (asoc->idata_supported || control->first_frag_seen) {
/*
* For IDATA we always check since we know
* that the first fragment is 0. For old
* DATA we have to receive the first before
netinet/sctp*: minor spelling fixes in comments. No functional change. Reviewed by: tuexen
2016-05-02 20:56:11 +00:00
* we know the first FSN (which is the TSN).
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
*/
if (SCTP_TSN_GE(control->fsn_included, chk->rec.data.fsn_num)) {
Add consistency checks to ensure that fragments of a user message have the same U-bit. MFC after: 3 days
2014-04-20 21:11:39 +00:00
/*
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* We have already delivered up to
* this so its a dup
Add consistency checks to ensure that fragments of a user message have the same U-bit. MFC after: 3 days
2014-04-20 21:11:39 +00:00
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"New fsn: %u is already seen in included_fsn: %u -- abort\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk->rec.data.fsn_num, control->fsn_included);
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_abort_in_reasm(stcb, control, chk,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
abort_flag,
SCTP_FROM_SCTP_INDATA + SCTP_LOC_11);
Add consistency checks to ensure that fragments of a user message have the same U-bit. MFC after: 3 days
2014-04-20 21:11:39 +00:00
return;
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
/*
* validate not beyond top FSN if we have seen last
* one
*/
if (SCTP_TSN_GT(chk->rec.data.fsn_num, control->top_fsn)) {
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"New fsn: %u is beyond or at top_fsn: %u -- abort\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk->rec.data.fsn_num,
control->top_fsn);
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_abort_in_reasm(stcb, control, chk,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
abort_flag,
SCTP_FROM_SCTP_INDATA + SCTP_LOC_12);
return;
}
}
/*
* If we reach here, we need to place the new chunk in the
* reassembly for this control.
*/
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"chunk is a not first fsn: %u needs to be inserted\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk->rec.data.fsn_num);
TAILQ_FOREACH(at, &control->reasm, sctp_next) {
if (SCTP_TSN_GT(at->rec.data.fsn_num, chk->rec.data.fsn_num)) {
/*
* This one in queue is bigger than the new
* one, insert the new one before at.
*/
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"Insert it before fsn: %u\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
at->rec.data.fsn_num);
asoc->size_on_reasm_queue += chk->send_size;
sctp_ucount_incr(asoc->cnt_on_reasm_queue);
TAILQ_INSERT_BEFORE(at, chk, sctp_next);
inserted = 1;
break;
} else if (at->rec.data.fsn_num == chk->rec.data.fsn_num) {
/*
* Gak, He sent me a duplicate str seq
* number
*/
/*
* foo bar, I guess I will just free this
* new guy, should we abort too? FIX ME
* MAYBE? Or it COULD be that the SSN's have
* wrapped. Maybe I should compare to TSN
* somehow... sigh for now just blow away
* the chunk!
*/
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"Duplicate to fsn: %u -- abort\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
at->rec.data.fsn_num);
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_abort_in_reasm(stcb, control,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk, abort_flag,
SCTP_FROM_SCTP_INDATA + SCTP_LOC_13);
return;
}
}
if (inserted == 0) {
/* Goes on the end */
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTPDBG(SCTP_DEBUG_XXX, "Inserting at tail of list fsn: %u\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk->rec.data.fsn_num);
asoc->size_on_reasm_queue += chk->send_size;
sctp_ucount_incr(asoc->cnt_on_reasm_queue);
TAILQ_INSERT_TAIL(&control->reasm, chk, sctp_next);
}
}
/*
* Ok lets see if we can suck any up into the control structure that
* are in seq if it makes sense.
*/
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
do_wakeup = 0;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/*
* If the first fragment has not been seen there is no sense in
* looking.
*/
if (control->first_frag_seen) {
next_fsn = control->fsn_included + 1;
TAILQ_FOREACH_SAFE(at, &control->reasm, sctp_next, nat) {
if (at->rec.data.fsn_num == next_fsn) {
/* We can add this one now to the control */
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"Adding more to control: %p at: %p fsn: %u next_fsn: %u included: %u\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control, at,
at->rec.data.fsn_num,
next_fsn, control->fsn_included);
TAILQ_REMOVE(&control->reasm, at, sctp_next);
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
sctp_add_chk_to_control(control, strm, stcb, asoc, at, SCTP_READ_LOCK_NOT_HELD);
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
if (control->on_read_q) {
do_wakeup = 1;
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
next_fsn++;
if (control->end_added && control->pdapi_started) {
if (strm->pd_api_started) {
strm->pd_api_started = 0;
control->pdapi_started = 0;
}
if (control->on_read_q == 0) {
sctp_add_to_readq(stcb->sctp_ep, stcb,
control,
&stcb->sctp_socket->so_rcv, control->end_added,
SCTP_READ_LOCK_NOT_HELD, SCTP_SO_NOT_LOCKED);
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
do_wakeup = 1;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
} else {
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
if (do_wakeup) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/* Need to wakeup the reader */
Address issues found by the XCode code analyzer.
2016-04-18 20:16:41 +00:00
sctp_wakeup_the_read_socket(stcb->sctp_ep, stcb, SCTP_SO_NOT_LOCKED);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
static struct sctp_queued_to_read *
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
sctp_find_reasm_entry(struct sctp_stream_in *strm, uint32_t msg_id, int ordered, int old)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
struct sctp_queued_to_read *control;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (ordered) {
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
TAILQ_FOREACH(control, &strm->inqueue, next_instrm) {
if (control->msg_id == msg_id) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
} else {
if (old) {
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
control = TAILQ_FIRST(&strm->uno_inqueue);
return (control);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
TAILQ_FOREACH(control, &strm->uno_inqueue, next_instrm) {
if (control->msg_id == msg_id) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
Don't use the control argument after calling sctp_add_to_readq(). This breaks the userland stack. There should be no functional change for the FreeBSD kernel stack. While there, use consistent variable nameing.
2016-04-27 18:58:47 +00:00
return (control);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
static int
sctp_process_a_data_chunk(struct sctp_tcb *stcb, struct sctp_association *asoc,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
struct mbuf **m, int offset, int chk_length,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_nets *net, uint32_t * high_tsn, int *abort_flag,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
int *break_flag, int last_chunk, uint8_t chtype)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
/* Process a data chunk */
/* struct sctp_tmit_chunk *chk; */
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
struct sctp_data_chunk *ch;
struct sctp_idata_chunk *nch, chunk_buf;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_tmit_chunk *chk;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
uint32_t tsn, fsn, gap, msg_id;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct mbuf *dmbuf;
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
int the_len;
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
int need_reasm_check = 0;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
uint16_t strmno;
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
struct mbuf *op_err;
char msg[SCTP_DIAG_INFO_LEN];
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
struct sctp_queued_to_read *control = NULL;
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
uint32_t protocol_id;
uint8_t chunk_flags;
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
struct sctp_stream_reset_list *liste;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
struct sctp_stream_in *strm;
int ordered;
size_t clen;
int created_control = 0;
uint8_t old_data;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
chk = NULL;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (chtype == SCTP_IDATA) {
nch = (struct sctp_idata_chunk *)sctp_m_getptr(*m, offset,
sizeof(struct sctp_idata_chunk), (uint8_t *) & chunk_buf);
ch = (struct sctp_data_chunk *)nch;
clen = sizeof(struct sctp_idata_chunk);
tsn = ntohl(ch->dp.tsn);
msg_id = ntohl(nch->dp.msg_id);
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
protocol_id = nch->dp.ppid_fsn.protocol_id;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (ch->ch.chunk_flags & SCTP_DATA_FIRST_FRAG)
fsn = 0;
else
Don't use anonymous unions.
2016-04-18 06:38:53 +00:00
fsn = ntohl(nch->dp.ppid_fsn.fsn);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
old_data = 0;
} else {
ch = (struct sctp_data_chunk *)sctp_m_getptr(*m, offset,
sizeof(struct sctp_data_chunk), (uint8_t *) & chunk_buf);
tsn = ntohl(ch->dp.tsn);
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
protocol_id = ch->dp.protocol_id;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
clen = sizeof(struct sctp_data_chunk);
fsn = tsn;
msg_id = (uint32_t) (ntohs(ch->dp.stream_sequence));
nch = NULL;
old_data = 1;
}
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
chunk_flags = ch->ch.chunk_flags;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if ((size_t)chk_length == clen) {
/*
* Need to send an abort since we had a empty data chunk.
*/
op_err = sctp_generate_no_user_data_cause(ch->dp.tsn);
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_14;
sctp_abort_an_association(stcb->sctp_ep, stcb, op_err, SCTP_SO_NOT_LOCKED);
*abort_flag = 1;
return (0);
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if ((chunk_flags & SCTP_DATA_SACK_IMMEDIATELY) == SCTP_DATA_SACK_IMMEDIATELY) {
asoc->send_sack = 1;
}
Fix a bug where SACKs are not sent when they should. Move some protection code to INVARIANTS. Cleanups. MFC after: 3 days.
2010-04-17 12:22:44 +00:00
ordered = ((chunk_flags & SCTP_DATA_UNORDERED) == 0);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_MAP_LOGGING_ENABLE) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
sctp_log_map(tsn, asoc->cumulative_tsn, asoc->highest_tsn_inside_map, SCTP_MAP_TSN_ENTERS);
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
}
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
if (stcb == NULL) {
return (0);
}
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
SCTP_LTRACE_CHK(stcb->sctp_ep, stcb, ch->ch.chunk_type, tsn);
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GE(asoc->cumulative_tsn, tsn)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* It is a duplicate */
SCTP_STAT_INCR(sctps_recvdupdata);
if (asoc->numduptsns < SCTP_MAX_DUP_TSNS) {
/* Record a dup for the next outbound sack */
asoc->dup_tsns[asoc->numduptsns] = tsn;
asoc->numduptsns++;
}
- fix sctp_ifn initial refcount issue (prevents deletion) - fix a bug during cookie collision that prevented an association from coming up in a specific restart case. - Fix it so the shutdown-pending flag gets removed (this is more for correctness then needed) when we enter shutdown-sent or shutdown-ack-sent states. - Fix a bug that caused the receiver to sometimes NOT send a SACK when a duplicate TSN arrived. Without this fix it was possible for the association to fall down if the - Deleted primary destination is also stored when SCTP_MOBILITY_BASE. (Previously, it is stored when only SCTP_MOBILITY_FASTHANDOFF) - Fix a locking issue where we might call send_initiate_ack() and incorrectly state the lock held/not held. Also fix it so that when we release the lock the inp cannot be deleted on us. - Add the debug option that can cause the stack to panic instead of aborting an assoc. This does not and should never show up in options but is useful for debugging unexpected aborts. - Add cumack_log sent to track sending cumack information for the debug case where we are running a special log per assoc. - Added extra () aroudn sctp_sbspace macro to avoid compile warnings. MFC after: 1 week
2007-10-16 14:05:51 +00:00
asoc->send_sack = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (0);
}
/* Calculate the number of TSN's between the base and this TSN */
Changes to the NR-Sack code so that: 1) All bit disappears 2) The two sets of gaps (nr and non-nr) are disjointed, you don't have gaps struck in both places. This adjusts us to coorespond to the new draft. Still to-do, cleanup the code so that there are only one set of sack routines (original NR-Sack done by E cloned all sack code).
2009-06-17 12:34:56 +00:00
SCTP_CALC_TSN_TO_GAP(gap, tsn, asoc->mapping_array_base_tsn);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (gap >= (SCTP_MAPPING_ARRAY << 3)) {
/* Can't hold the bit in the mapping at max array, toss it */
return (0);
}
if (gap >= (uint32_t) (asoc->mapping_array_size << 3)) {
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_TCB_LOCK_ASSERT(stcb);
- Fix a memory overwrite when the mapping array is expanded, size of expansion was not taken int consideration. - Fix so vtag hash is 1 bigger so that it modulo's out correctly, avoids a panic when restart with right modulo happens. - do not dereference stcb when control->do_not_ref_stcb is set - Fix up packet logging to not often use a lock and also to add to options. - Fix some logging option duplication in the sctputil.h
2007-05-30 17:39:45 +00:00
if (sctp_expand_mapping_array(asoc, gap)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Can't expand, drop it */
return (0);
}
}
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tsn, *high_tsn)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*high_tsn = tsn;
}
/* See if we have received this one already */
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
if (SCTP_IS_TSN_PRESENT(asoc->mapping_array, gap) ||
SCTP_IS_TSN_PRESENT(asoc->nr_mapping_array, gap)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_STAT_INCR(sctps_recvdupdata);
if (asoc->numduptsns < SCTP_MAX_DUP_TSNS) {
/* Record a dup for the next outbound sack */
asoc->dup_tsns[asoc->numduptsns] = tsn;
asoc->numduptsns++;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
asoc->send_sack = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (0);
}
/*
* Check to see about the GONE flag, duplicates would cause a sack
* to be sent up above
*/
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
if (((stcb->sctp_ep->sctp_flags & SCTP_PCB_FLAGS_SOCKET_GONE) ||
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
(stcb->sctp_ep->sctp_flags & SCTP_PCB_FLAGS_SOCKET_ALLGONE) ||
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
(stcb->asoc.state & SCTP_STATE_CLOSED_SOCKET))) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* wait a minute, this guy is gone, there is no longer a
* receiver. Send peer an ABORT!
*/
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
op_err = sctp_generate_cause(SCTP_CAUSE_OUT_OF_RESC, "");
Provide in the association change notification the received ABORT chunk if case of SCTP_COMM_LOST or SCTP_CANT_STR_ASSOC as required by RFC 6458. MFC after: 3 days
2012-05-12 20:11:35 +00:00
sctp_abort_an_association(stcb->sctp_ep, stcb, op_err, SCTP_SO_NOT_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*abort_flag = 1;
return (0);
}
/*
* Now before going further we see if there is room. If NOT then we
* MAY let one through only IF this TSN is the one we are waiting
* for on a partial delivery API.
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/* Is the stream valid? */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
strmno = ntohs(ch->dp.stream_id);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (strmno >= asoc->streamincnt) {
Cleanup the handling of error causes for ERROR chunks. This fixes an inconsistency of the padding handling. The final padding is now considered to be a chunk padding. MFC after: 1 week
2015-09-12 17:08:51 +00:00
struct sctp_error_invalid_stream *cause;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Cleanup the handling of error causes for ERROR chunks. This fixes an inconsistency of the padding handling. The final padding is now considered to be a chunk padding. MFC after: 1 week
2015-09-12 17:08:51 +00:00
op_err = sctp_get_mbuf_for_msg(sizeof(struct sctp_error_invalid_stream),
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
0, M_NOWAIT, 1, MT_DATA);
Cleanup the handling of error causes for ERROR chunks. This fixes an inconsistency of the padding handling. The final padding is now considered to be a chunk padding. MFC after: 1 week
2015-09-12 17:08:51 +00:00
if (op_err != NULL) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* add some space up front so prepend will work well */
Cleanup the handling of error causes for ERROR chunks. This fixes an inconsistency of the padding handling. The final padding is now considered to be a chunk padding. MFC after: 1 week
2015-09-12 17:08:51 +00:00
SCTP_BUF_RESV_UF(op_err, sizeof(struct sctp_chunkhdr));
cause = mtod(op_err, struct sctp_error_invalid_stream *);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* Error causes are just param's and this one has
* two back to back phdr, one with the error type
* and size, the other with the streamid and a rsvd
*/
Cleanup the handling of error causes for ERROR chunks. This fixes an inconsistency of the padding handling. The final padding is now considered to be a chunk padding. MFC after: 1 week
2015-09-12 17:08:51 +00:00
SCTP_BUF_LEN(op_err) = sizeof(struct sctp_error_invalid_stream);
cause->cause.code = htons(SCTP_CAUSE_INVALID_STREAM);
cause->cause.length = htons(sizeof(struct sctp_error_invalid_stream));
cause->stream_id = ch->dp.stream_id;
cause->reserved = htons(0);
sctp_queue_op_err(stcb, op_err);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
SCTP_STAT_INCR(sctps_badsid);
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_TCB_LOCK_ASSERT(stcb);
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
SCTP_SET_TSN_PRESENT(asoc->nr_mapping_array, gap);
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tsn, asoc->highest_tsn_inside_nr_map)) {
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
asoc->highest_tsn_inside_nr_map = tsn;
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
}
if (tsn == (asoc->cumulative_tsn + 1)) {
/* Update cum-ack */
asoc->cumulative_tsn = tsn;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (0);
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
strm = &asoc->strmin[strmno];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* If its a fragmented message, lets see if we can find the control
* on the reassembly queues.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
Improve a consistency check to not detect valid cases for unordered user messages using DATA chunks as invalid ones. While there, ensure that error causes are provided when sending ABORT chunks in case of reassembly problems detected. Thanks to Taylor Brandstetter for making me aware of this problem. MFC after: 3 days
2016-08-10 17:19:33 +00:00
if ((chtype == SCTP_IDATA) &&
((chunk_flags & SCTP_DATA_FIRST_FRAG) == 0) &&
(fsn == 0)) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/*
* The first *must* be fsn 0, and other (middle/end) pieces
Improve a consistency check to not detect valid cases for unordered user messages using DATA chunks as invalid ones. While there, ensure that error causes are provided when sending ABORT chunks in case of reassembly problems detected. Thanks to Taylor Brandstetter for making me aware of this problem. MFC after: 3 days
2016-08-10 17:19:33 +00:00
* can *not* be fsn 0. XXX: This can happen in case of a
* wrap around. Ignore is for now.
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
*/
Improve a consistency check to not detect valid cases for unordered user messages using DATA chunks as invalid ones. While there, ensure that error causes are provided when sending ABORT chunks in case of reassembly problems detected. Thanks to Taylor Brandstetter for making me aware of this problem. MFC after: 3 days
2016-08-10 17:19:33 +00:00
snprintf(msg, sizeof(msg), "FSN zero for MID=%8.8x, but flags=%2.2x",
msg_id, chunk_flags);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
goto err_out;
}
Improve a consistency check to not detect valid cases for unordered user messages using DATA chunks as invalid ones. While there, ensure that error causes are provided when sending ABORT chunks in case of reassembly problems detected. Thanks to Taylor Brandstetter for making me aware of this problem. MFC after: 3 days
2016-08-10 17:19:33 +00:00
control = sctp_find_reasm_entry(strm, msg_id, ordered, old_data);
SCTPDBG(SCTP_DEBUG_XXX, "chunk_flags:0x%x look for control on queues %p\n",
chunk_flags, control);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if ((chunk_flags & SCTP_DATA_NOT_FRAG) != SCTP_DATA_NOT_FRAG) {
/* See if we can find the re-assembly entity */
Improve a consistency check to not detect valid cases for unordered user messages using DATA chunks as invalid ones. While there, ensure that error causes are provided when sending ABORT chunks in case of reassembly problems detected. Thanks to Taylor Brandstetter for making me aware of this problem. MFC after: 3 days
2016-08-10 17:19:33 +00:00
if (control != NULL) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/* We found something, does it belong? */
if (ordered && (msg_id != control->sinfo_ssn)) {
Improve a consistency check to not detect valid cases for unordered user messages using DATA chunks as invalid ones. While there, ensure that error causes are provided when sending ABORT chunks in case of reassembly problems detected. Thanks to Taylor Brandstetter for making me aware of this problem. MFC after: 3 days
2016-08-10 17:19:33 +00:00
snprintf(msg, sizeof(msg), "Reassembly problem (MID=%8.8x)", msg_id);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
err_out:
op_err = sctp_generate_cause(SCTP_CAUSE_PROTOCOL_VIOLATION, msg);
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_15;
sctp_abort_an_association(stcb->sctp_ep, stcb, op_err, SCTP_SO_NOT_LOCKED);
*abort_flag = 1;
return (0);
}
if (ordered && ((control->sinfo_flags >> 8) & SCTP_DATA_UNORDERED)) {
/*
* We can't have a switched order with an
* unordered chunk
*/
Improve a consistency check to not detect valid cases for unordered user messages using DATA chunks as invalid ones. While there, ensure that error causes are provided when sending ABORT chunks in case of reassembly problems detected. Thanks to Taylor Brandstetter for making me aware of this problem. MFC after: 3 days
2016-08-10 17:19:33 +00:00
snprintf(msg, sizeof(msg), "All fragments of a user message must be ordered or unordered (TSN=%8.8x)",
tsn);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
goto err_out;
}
if (!ordered && (((control->sinfo_flags >> 8) & SCTP_DATA_UNORDERED) == 0)) {
/*
* We can't have a switched unordered with a
* ordered chunk
*/
Improve a consistency check to not detect valid cases for unordered user messages using DATA chunks as invalid ones. While there, ensure that error causes are provided when sending ABORT chunks in case of reassembly problems detected. Thanks to Taylor Brandstetter for making me aware of this problem. MFC after: 3 days
2016-08-10 17:19:33 +00:00
snprintf(msg, sizeof(msg), "All fragments of a user message must be ordered or unordered (TSN=%8.8x)",
tsn);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
goto err_out;
}
}
} else {
/*
* Its a complete segment. Lets validate we don't have a
* re-assembly going on with the same Stream/Seq (for
* ordered) or in the same Stream for unordered.
*/
Improve a consistency check to not detect valid cases for unordered user messages using DATA chunks as invalid ones. While there, ensure that error causes are provided when sending ABORT chunks in case of reassembly problems detected. Thanks to Taylor Brandstetter for making me aware of this problem. MFC after: 3 days
2016-08-10 17:19:33 +00:00
if (control != NULL) {
if (ordered || (old_data == 0)) {
SCTPDBG(SCTP_DEBUG_XXX, "chunk_flags: 0x%x dup detected on msg_id: %u\n",
chunk_flags, msg_id);
snprintf(msg, sizeof(msg), "Duplicate MID=%8.8x detected.", msg_id);
goto err_out;
} else {
if ((tsn == control->fsn_included + 1) &&
(control->end_added == 0)) {
snprintf(msg, sizeof(msg), "Illegal message sequence, missing end for MID: %8.8x", control->fsn_included);
goto err_out;
} else {
control = NULL;
}
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
}
/* now do the tests */
if (((asoc->cnt_on_all_streams +
asoc->cnt_on_reasm_queue +
asoc->cnt_msg_on_sb) >= SCTP_BASE_SYSCTL(sctp_max_chunks_on_queue)) ||
(((int)asoc->my_rwnd) <= 0)) {
/*
* When we have NO room in the rwnd we check to make sure
* the reader is doing its job...
*/
if (stcb->sctp_socket->so_rcv.sb_cc) {
/* some to read, wake-up */
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
struct socket *so;
so = SCTP_INP_SO(stcb->sctp_ep);
atomic_add_int(&stcb->asoc.refcnt, 1);
SCTP_TCB_UNLOCK(stcb);
SCTP_SOCKET_LOCK(so, 1);
SCTP_TCB_LOCK(stcb);
atomic_subtract_int(&stcb->asoc.refcnt, 1);
if (stcb->asoc.state & SCTP_STATE_CLOSED_SOCKET) {
/* assoc was freed while we were unlocked */
SCTP_SOCKET_UNLOCK(so, 1);
return (0);
}
#endif
sctp_sorwakeup(stcb->sctp_ep, stcb->sctp_socket);
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
SCTP_SOCKET_UNLOCK(so, 1);
#endif
}
/* now is it in the mapping array of what we have accepted? */
if (nch == NULL) {
if (SCTP_TSN_GT(tsn, asoc->highest_tsn_inside_map) &&
SCTP_TSN_GT(tsn, asoc->highest_tsn_inside_nr_map)) {
/* Nope not in the valid range dump it */
dump_packet:
sctp_set_rwnd(stcb, asoc);
if ((asoc->cnt_on_all_streams +
asoc->cnt_on_reasm_queue +
asoc->cnt_msg_on_sb) >= SCTP_BASE_SYSCTL(sctp_max_chunks_on_queue)) {
SCTP_STAT_INCR(sctps_datadropchklmt);
} else {
SCTP_STAT_INCR(sctps_datadroprwnd);
}
*break_flag = 1;
return (0);
}
} else {
if (control == NULL) {
goto dump_packet;
}
if (SCTP_TSN_GT(fsn, control->top_fsn)) {
goto dump_packet;
}
}
}
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
#ifdef SCTP_ASOCLOG_OF_TSNS
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
SCTP_TCB_LOCK_ASSERT(stcb);
if (asoc->tsn_in_at >= SCTP_TSN_LOG_SIZE) {
asoc->tsn_in_at = 0;
asoc->tsn_in_wrapped = 1;
}
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
asoc->in_tsnlog[asoc->tsn_in_at].tsn = tsn;
asoc->in_tsnlog[asoc->tsn_in_at].strm = strmno;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
asoc->in_tsnlog[asoc->tsn_in_at].seq = msg_id;
- More work on making send lock contention. - Removed free-oqueue cache. - Fix counter for sq entries - Increased the amount of information retained on ASOC_TSN logging on the association. - Made it so with the ASOC_TSN logging on sending or recieving an abort we dump the log. - Went through and added invariant's around some panic's that needed them. - decrements went to atomic_subtact_int instead of add -1 - Removed residual count increment that threw off a strm oq count. - Tracks and complaints if we don't have a LAST fragment and clean up the sp structure. - Track a new stat that counts number of abandoned msgs that happen if you close without reading. - Fix lookup of frag point to be aware of a 0 assoc-id. Reviewed by: gnn
2007-04-19 11:28:43 +00:00
asoc->in_tsnlog[asoc->tsn_in_at].sz = chk_length;
asoc->in_tsnlog[asoc->tsn_in_at].flgs = chunk_flags;
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
asoc->in_tsnlog[asoc->tsn_in_at].stcb = (void *)stcb;
asoc->in_tsnlog[asoc->tsn_in_at].in_pos = asoc->tsn_in_at;
asoc->in_tsnlog[asoc->tsn_in_at].in_out = 1;
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
asoc->tsn_in_at++;
#endif
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/*
* Before we continue lets validate that we are not being fooled by
* an evil attacker. We can only have Nk chunks based on our TSN
* spread allowed by the mapping array N * 8 bits, so there is no
* way our stream sequence numbers could have wrapped. We of course
* only validate the FIRST fragment so the bit must be set.
*/
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
if ((chunk_flags & SCTP_DATA_FIRST_FRAG) &&
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
(TAILQ_EMPTY(&asoc->resetHead)) &&
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
(chunk_flags & SCTP_DATA_UNORDERED) == 0 &&
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
SCTP_MSGID_GE(old_data, asoc->strmin[strmno].last_sequence_delivered, msg_id)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* The incoming sseq is behind where we last delivered? */
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTPDBG(SCTP_DEBUG_INDATA1, "EVIL/Broken-Dup S-SEQ: %u delivered: %u from peer, Abort!\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
msg_id, asoc->strmin[strmno].last_sequence_delivered);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
snprintf(msg, sizeof(msg), "Delivered SSN=%4.4x, got TSN=%8.8x, SID=%4.4x, SSN=%4.4x",
asoc->strmin[strmno].last_sequence_delivered,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
tsn, strmno, msg_id);
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
op_err = sctp_generate_cause(SCTP_CAUSE_PROTOCOL_VIOLATION, msg);
Fix and cleanup the debug information. This has no user-visible changes. Thanks to Irene Ruengeler for proving a patch. MFC after: 3 days
2015-05-28 16:00:23 +00:00
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_16;
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
sctp_abort_an_association(stcb->sctp_ep, stcb, op_err, SCTP_SO_NOT_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*abort_flag = 1;
return (0);
}
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
/************************************
* From here down we may find ch-> invalid
* so its a good idea NOT to use it.
*************************************/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (nch) {
the_len = (chk_length - sizeof(struct sctp_idata_chunk));
} else {
the_len = (chk_length - sizeof(struct sctp_data_chunk));
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (last_chunk == 0) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (nch) {
dmbuf = SCTP_M_COPYM(*m,
(offset + sizeof(struct sctp_idata_chunk)),
the_len, M_NOWAIT);
} else {
dmbuf = SCTP_M_COPYM(*m,
(offset + sizeof(struct sctp_data_chunk)),
the_len, M_NOWAIT);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP_MBUF_LOGGING
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_MBUF_LOGGING_ENABLE) {
Minimize the usage of SCTP_BUF_IS_EXTENDED. This should help Robert...
2015-01-10 20:49:57 +00:00
sctp_log_mbc(dmbuf, SCTP_MBUF_ICOPY);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
#endif
} else {
/* We can steal the last chunk */
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
int l_len;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
dmbuf = *m;
/* lop off the top part */
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (nch) {
m_adj(dmbuf, (offset + sizeof(struct sctp_idata_chunk)));
} else {
m_adj(dmbuf, (offset + sizeof(struct sctp_data_chunk)));
}
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
if (SCTP_BUF_NEXT(dmbuf) == NULL) {
l_len = SCTP_BUF_LEN(dmbuf);
} else {
/*
* need to count up the size hopefully does not hit
* this to often :-0
*/
struct mbuf *lat;
l_len = 0;
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
for (lat = dmbuf; lat; lat = SCTP_BUF_NEXT(lat)) {
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
l_len += SCTP_BUF_LEN(lat);
}
}
if (l_len > the_len) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Trim the end round bytes off too */
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
m_adj(dmbuf, -(l_len - the_len));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
if (dmbuf == NULL) {
SCTP_STAT_INCR(sctps_nomem);
return (0);
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/*
* Now no matter what we need a control, get one if we don't have
* one (we may have gotten it above when we found the message was
* fragmented
*/
if (control == NULL) {
sctp_alloc_a_readq(stcb, control);
sctp_build_readq_entry_mac(control, stcb, asoc->context, net, tsn,
protocol_id,
strmno, msg_id,
chunk_flags,
NULL, fsn, msg_id);
if (control == NULL) {
SCTP_STAT_INCR(sctps_nomem);
return (0);
}
if ((chunk_flags & SCTP_DATA_NOT_FRAG) == SCTP_DATA_NOT_FRAG) {
control->data = dmbuf;
control->tail_mbuf = NULL;
control->end_added = control->last_frag_seen = control->first_frag_seen = 1;
control->top_fsn = control->fsn_included = fsn;
}
created_control = 1;
}
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTPDBG(SCTP_DEBUG_XXX, "chunk_flags: 0x%x ordered: %d msgid: %u control: %p\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chunk_flags, ordered, msg_id, control);
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
if ((chunk_flags & SCTP_DATA_NOT_FRAG) == SCTP_DATA_NOT_FRAG &&
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_EMPTY(&asoc->resetHead) &&
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
((ordered == 0) ||
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
((uint16_t) (asoc->strmin[strmno].last_sequence_delivered + 1) == msg_id &&
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_EMPTY(&asoc->strmin[strmno].inqueue)))) {
/* Candidate for express delivery */
/*
* Its not fragmented, No PD-API is up, Nothing in the
* delivery queue, Its un-ordered OR ordered and the next to
* deliver AND nothing else is stuck on the stream queue,
* And there is room for it in the socket buffer. Lets just
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* stuff it up the buffer....
*/
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
SCTP_SET_TSN_PRESENT(asoc->nr_mapping_array, gap);
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tsn, asoc->highest_tsn_inside_nr_map)) {
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
asoc->highest_tsn_inside_nr_map = tsn;
}
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTPDBG(SCTP_DEBUG_XXX, "Injecting control: %p to be read (msg_id: %u)\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control, msg_id);
sctp_add_to_readq(stcb->sctp_ep, stcb,
control, &stcb->sctp_socket->so_rcv,
1, SCTP_READ_LOCK_NOT_HELD, SCTP_SO_NOT_LOCKED);
if ((chunk_flags & SCTP_DATA_UNORDERED) == 0) {
/* for ordered, bump what we delivered */
strm->last_sequence_delivered++;
}
SCTP_STAT_INCR(sctps_recvexpress);
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_STR_LOGGING_ENABLE) {
sctp_log_strm_del_alt(stcb, tsn, msg_id, strmno,
SCTP_STR_LOG_FROM_EXPRS_DEL);
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control = NULL;
goto finish_express_del;
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/* Now will we need a chunk too? */
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
if ((chunk_flags & SCTP_DATA_NOT_FRAG) != SCTP_DATA_NOT_FRAG) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_alloc_a_chunk(stcb, chk);
if (chk == NULL) {
/* No memory so we drop the chunk */
SCTP_STAT_INCR(sctps_nomem);
if (last_chunk == 0) {
/* we copied it, free the copy */
sctp_m_freem(dmbuf);
}
return (0);
}
chk->rec.data.TSN_seq = tsn;
chk->no_fr_allowed = 0;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk->rec.data.fsn_num = fsn;
chk->rec.data.stream_seq = msg_id;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
chk->rec.data.stream_number = strmno;
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
chk->rec.data.payloadtype = protocol_id;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
chk->rec.data.context = stcb->asoc.context;
chk->rec.data.doing_fast_retransmit = 0;
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
chk->rec.data.rcv_flags = chunk_flags;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
chk->asoc = asoc;
chk->send_size = the_len;
chk->whoTo = net;
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTPDBG(SCTP_DEBUG_XXX, "Building ck: %p for control: %p to be read (msg_id: %u)\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk,
control, msg_id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
atomic_add_int(&net->ref_count, 1);
chk->data = dmbuf;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
/* Set the appropriate TSN mark */
if (SCTP_BASE_SYSCTL(sctp_do_drain) == 0) {
SCTP_SET_TSN_PRESENT(asoc->nr_mapping_array, gap);
if (SCTP_TSN_GT(tsn, asoc->highest_tsn_inside_nr_map)) {
asoc->highest_tsn_inside_nr_map = tsn;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
SCTP_SET_TSN_PRESENT(asoc->mapping_array, gap);
if (SCTP_TSN_GT(tsn, asoc->highest_tsn_inside_map)) {
asoc->highest_tsn_inside_map = tsn;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/* Now is it complete (i.e. not fragmented)? */
if ((chunk_flags & SCTP_DATA_NOT_FRAG) == SCTP_DATA_NOT_FRAG) {
/*
* Special check for when streams are resetting. We could be
* more smart about this and check the actual stream to see
* if it is not being reset.. that way we would not create a
* HOLB when amongst streams being reset and those not being
* reset.
*
*/
if (((liste = TAILQ_FIRST(&asoc->resetHead)) != NULL) &&
SCTP_TSN_GT(tsn, liste->tsn)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* yep its past where we need to reset... go ahead
* and queue it.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (TAILQ_EMPTY(&asoc->pending_reply_queue)) {
/* first one on */
TAILQ_INSERT_TAIL(&asoc->pending_reply_queue, control, next);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
struct sctp_queued_to_read *ctlOn, *nctlOn;
unsigned char inserted = 0;
TAILQ_FOREACH_SAFE(ctlOn, &asoc->pending_reply_queue, next, nctlOn) {
if (SCTP_TSN_GT(control->sinfo_tsn, ctlOn->sinfo_tsn)) {
continue;
} else {
/* found it */
TAILQ_INSERT_BEFORE(ctlOn, control, next);
inserted = 1;
break;
Don't free an mbuf twice. This only happens in very rare error cases where the peer sends illegal sequencing information in DATA chunks for an existing association. MFC after: 3 days.
2014-04-23 21:20:55 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (inserted == 0) {
/*
* must be put at end, use prevP
* (all setup from loop) to setup
* nextP.
*/
TAILQ_INSERT_TAIL(&asoc->pending_reply_queue, control, next);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
goto finish_express_del;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
if (chunk_flags & SCTP_DATA_UNORDERED) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* queue directly into socket buffer */
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTPDBG(SCTP_DEBUG_XXX, "Unordered data to be read control: %p msg_id: %u\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control, msg_id);
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
sctp_mark_non_revokable(asoc, control->sinfo_tsn);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_add_to_readq(stcb->sctp_ep, stcb,
control,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
&stcb->sctp_socket->so_rcv, 1,
SCTP_READ_LOCK_NOT_HELD, SCTP_SO_NOT_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
} else {
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTPDBG(SCTP_DEBUG_XXX, "Queue control: %p for reordering msg_id: %u\n", control,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
msg_id);
sctp_queue_data_to_stream(stcb, strm, asoc, control, abort_flag, &need_reasm_check);
if (*abort_flag) {
if (last_chunk) {
*m = NULL;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
return (0);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
goto finish_express_del;
}
/* If we reach here its a reassembly */
need_reasm_check = 1;
SCTPDBG(SCTP_DEBUG_XXX,
Cleanup debug output.
2016-04-18 06:58:07 +00:00
"Queue data to stream for reasm control: %p msg_id: %u\n",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
control, msg_id);
sctp_queue_data_for_reasm(stcb, asoc, strm, control, chk, created_control, abort_flag, tsn);
if (*abort_flag) {
/*
* the assoc is now gone and chk was put onto the reasm
* queue, which has all been freed.
*/
if (last_chunk) {
*m = NULL;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
return (0);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
finish_express_del:
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/* Here we tidy up things */
Get delayed SACK working again. MFC after: 3 days.
2010-04-19 14:15:58 +00:00
if (tsn == (asoc->cumulative_tsn + 1)) {
/* Update cum-ack */
asoc->cumulative_tsn = tsn;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (last_chunk) {
*m = NULL;
}
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
if (ordered) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_STAT_INCR_COUNTER64(sctps_inorderchunks);
} else {
SCTP_STAT_INCR_COUNTER64(sctps_inunorderchunks);
}
SCTP_STAT_INCR(sctps_recvdata);
/* Set it present please */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_STR_LOGGING_ENABLE) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
sctp_log_strm_del_alt(stcb, tsn, msg_id, strmno, SCTP_STR_LOG_FROM_MARK_TSN);
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_MAP_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_map(asoc->mapping_array_base_tsn, asoc->cumulative_tsn,
asoc->highest_tsn_inside_map, SCTP_MAP_PREPARE_SLIDE);
}
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
/* check the special flag for stream resets */
if (((liste = TAILQ_FIRST(&asoc->resetHead)) != NULL) &&
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
SCTP_TSN_GE(asoc->cumulative_tsn, liste->tsn)) {
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
/*
* we have finished working through the backlogged TSN's now
* time to reset streams. 1: call reset function. 2: free
* pending_reply space 3: distribute any chunks in
* pending_reply_queue.
*/
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
struct sctp_queued_to_read *ctl, *nctl;
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
Don't include a structure containing a flexible array in another structure. MFC after: 10 days
2012-09-07 13:36:42 +00:00
sctp_reset_in_stream(stcb, liste->number_entries, liste->list_of_streams);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
TAILQ_REMOVE(&asoc->resetHead, liste, next_resp);
Fix several problems with Stream Reset. 1) We were not handling (or sending) the IN_PROGRESS case if the other side (or our side) was not able to reset (awaiting more data). 2) We would improperly send a stream-reset when we should not. Not waiting until the TSN had been assigned when data was inqueue. Reviewed by: tuexen
2015-07-22 11:30:37 +00:00
sctp_send_deferred_reset_response(stcb, liste, SCTP_STREAM_RESET_RESULT_PERFORMED);
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_FREE(liste, SCTP_M_STRESET);
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* sa_ignore FREED_MEMORY */
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
liste = TAILQ_FIRST(&asoc->resetHead);
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
if (TAILQ_EMPTY(&asoc->resetHead)) {
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
/* All can be removed */
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(ctl, &asoc->pending_reply_queue, next, nctl) {
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
TAILQ_REMOVE(&asoc->pending_reply_queue, ctl, next);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
sctp_queue_data_to_stream(stcb, strm, asoc, ctl, abort_flag, &need_reasm_check);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
if (*abort_flag) {
return (0);
}
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
} else {
TAILQ_FOREACH_SAFE(ctl, &asoc->pending_reply_queue, next, nctl) {
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(ctl->sinfo_tsn, liste->tsn)) {
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
break;
}
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
/*
* if ctl->sinfo_tsn is <= liste->tsn we can
* process it which is the NOT of
* ctl->sinfo_tsn > liste->tsn
*/
TAILQ_REMOVE(&asoc->pending_reply_queue, ctl, next);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
sctp_queue_data_to_stream(stcb, strm, asoc, ctl, abort_flag, &need_reasm_check);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
if (*abort_flag) {
return (0);
}
}
}
/*
* Now service re-assembly to pick up anything that has been
* held on reassembly queue?
*/
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
(void)sctp_deliver_reasm_check(stcb, asoc, strm, SCTP_READ_LOCK_NOT_HELD);
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
need_reasm_check = 0;
}
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
if (need_reasm_check) {
/* Another one waits ? */
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
(void)sctp_deliver_reasm_check(stcb, asoc, strm, SCTP_READ_LOCK_NOT_HELD);
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (1);
}
Add const to several constants. Thanks to Nicholas Nethercote for providing the patch via https://bugzilla.mozilla.org/show_bug.cgi?id=1255655 MFC after: 1 week
2016-03-23 13:28:04 +00:00
static const int8_t sctp_map_lookup_tab[256] = {
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 4,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 5,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 4,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 6,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 4,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 5,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 4,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 7,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 4,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 5,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 4,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 6,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 4,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 5,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 4,
0, 1, 0, 2, 0, 1, 0, 3,
0, 1, 0, 2, 0, 1, 0, 8
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
};
void
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
sctp_slide_mapping_arrays(struct sctp_tcb *stcb)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
/*
* Now we also need to check the mapping array in a couple of ways.
* 1) Did we move the cum-ack point?
This fixes a BUG in the handling of the cum-ack calculation. We were only paying attention to the nr-mapping-array. Which seems to make sense on the surface, by definition things up to the cum-ack should be deliverable thus in the nr-mapping-array. However (there is always a gotcha) thats not true when it comes to large messages. The stack may hold the message while re-assembling it not not deliver it based on several thresholds. If that happens (which it would for smaller large messages) then the cum-ack is figured wrong. We now properly use both arrays in the cum-ack calculation. MFC after: 1 week.
2010-06-07 18:29:10 +00:00
*
* When you first glance at this you might think that all entries that
netinet/sctp*: minor spelling fixes in comments. No functional change. Reviewed by: tuexen
2016-05-02 20:56:11 +00:00
* make up the position of the cum-ack would be in the nr-mapping
This fixes a BUG in the handling of the cum-ack calculation. We were only paying attention to the nr-mapping-array. Which seems to make sense on the surface, by definition things up to the cum-ack should be deliverable thus in the nr-mapping-array. However (there is always a gotcha) thats not true when it comes to large messages. The stack may hold the message while re-assembling it not not deliver it based on several thresholds. If that happens (which it would for smaller large messages) then the cum-ack is figured wrong. We now properly use both arrays in the cum-ack calculation. MFC after: 1 week.
2010-06-07 18:29:10 +00:00
* array only.. i.e. things up to the cum-ack are always
* deliverable. Thats true with one exception, when its a fragmented
* message we may not deliver the data until some threshold (or all
* of it) is in place. So we must OR the nr_mapping_array and
* mapping_array to get a true picture of the cum-ack.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
struct sctp_association *asoc;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
int at;
This fixes a BUG in the handling of the cum-ack calculation. We were only paying attention to the nr-mapping-array. Which seems to make sense on the surface, by definition things up to the cum-ack should be deliverable thus in the nr-mapping-array. However (there is always a gotcha) thats not true when it comes to large messages. The stack may hold the message while re-assembling it not not deliver it based on several thresholds. If that happens (which it would for smaller large messages) then the cum-ack is figured wrong. We now properly use both arrays in the cum-ack calculation. MFC after: 1 week.
2010-06-07 18:29:10 +00:00
uint8_t val;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
int slide_from, slide_end, lgap, distance;
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
uint32_t old_cumack, old_base, old_highest, highest_tsn;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc = &stcb->asoc;
old_cumack = asoc->cumulative_tsn;
old_base = asoc->mapping_array_base_tsn;
old_highest = asoc->highest_tsn_inside_map;
/*
* We could probably improve this a small bit by calculating the
* offset of the current cum-ack as the starting point.
*/
at = 0;
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
for (slide_from = 0; slide_from < stcb->asoc.mapping_array_size; slide_from++) {
BUG:Turns out we need to use both bit maps to calculate the cum-ack (we were not doing it for the NR-Sack case). With this fix NR-sack should now work correctly. MFC after: 1 week
2010-06-09 16:39:18 +00:00
val = asoc->nr_mapping_array[slide_from] | asoc->mapping_array[slide_from];
This fixes a BUG in the handling of the cum-ack calculation. We were only paying attention to the nr-mapping-array. Which seems to make sense on the surface, by definition things up to the cum-ack should be deliverable thus in the nr-mapping-array. However (there is always a gotcha) thats not true when it comes to large messages. The stack may hold the message while re-assembling it not not deliver it based on several thresholds. If that happens (which it would for smaller large messages) then the cum-ack is figured wrong. We now properly use both arrays in the cum-ack calculation. MFC after: 1 week.
2010-06-07 18:29:10 +00:00
if (val == 0xff) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
at += 8;
} else {
/* there is a 0 bit */
This fixes a BUG in the handling of the cum-ack calculation. We were only paying attention to the nr-mapping-array. Which seems to make sense on the surface, by definition things up to the cum-ack should be deliverable thus in the nr-mapping-array. However (there is always a gotcha) thats not true when it comes to large messages. The stack may hold the message while re-assembling it not not deliver it based on several thresholds. If that happens (which it would for smaller large messages) then the cum-ack is figured wrong. We now properly use both arrays in the cum-ack calculation. MFC after: 1 week.
2010-06-07 18:29:10 +00:00
at += sctp_map_lookup_tab[val];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
break;
}
}
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
asoc->cumulative_tsn = asoc->mapping_array_base_tsn + (at - 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(asoc->cumulative_tsn, asoc->highest_tsn_inside_map) &&
SCTP_TSN_GT(asoc->cumulative_tsn, asoc->highest_tsn_inside_nr_map)) {
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
#ifdef INVARIANTS
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
panic("huh, cumack 0x%x greater than high-tsn 0x%x in map",
asoc->cumulative_tsn, asoc->highest_tsn_inside_map);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#else
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
SCTP_PRINTF("huh, cumack 0x%x greater than high-tsn 0x%x in map - should panic?\n",
asoc->cumulative_tsn, asoc->highest_tsn_inside_map);
Fixes a bug where SACKs in the face of mapping_array expansion would break. Basically once we expanded the array we no longer had both mapping arrays in sync which the sack processing code depends on. This would mean we were randomly referring to memory that was probably not there. This mostly just gave us bad sack results going back to the peer. If INVARIENTS was on of course we would hit the panic routine in the sack_check call. We also add a print routine for the place where one would panic in invarients so one can see what the main mapping array holds. Reviewed by: tuexen@freebsd.org MFC after: 2 weeks
2010-03-23 01:36:50 +00:00
sctp_print_mapping_array(asoc);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_MAP_LOGGING_ENABLE) {
sctp_log_map(0, 6, asoc->highest_tsn_inside_map, SCTP_MAP_SLIDE_RESULT);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->highest_tsn_inside_map = asoc->cumulative_tsn;
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
asoc->highest_tsn_inside_nr_map = asoc->cumulative_tsn;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#endif
}
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(asoc->highest_tsn_inside_nr_map, asoc->highest_tsn_inside_map)) {
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
highest_tsn = asoc->highest_tsn_inside_nr_map;
} else {
highest_tsn = asoc->highest_tsn_inside_map;
}
if ((asoc->cumulative_tsn == highest_tsn) && (at >= 8)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* The complete array was completed by a single FR */
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
/* highest becomes the cum-ack */
Fix a bug where SACKs are not sent when they should. Move some protection code to INVARIANTS. Cleanups. MFC after: 3 days.
2010-04-17 12:22:44 +00:00
int clr;
#ifdef INVARIANTS
unsigned int i;
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* clear the array */
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
clr = ((at + 7) >> 3);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
if (clr > asoc->mapping_array_size) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
clr = asoc->mapping_array_size;
}
memset(asoc->mapping_array, 0, clr);
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
memset(asoc->nr_mapping_array, 0, clr);
Fix a bug where SACKs are not sent when they should. Move some protection code to INVARIANTS. Cleanups. MFC after: 3 days.
2010-04-17 12:22:44 +00:00
#ifdef INVARIANTS
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
for (i = 0; i < asoc->mapping_array_size; i++) {
if ((asoc->mapping_array[i]) || (asoc->nr_mapping_array[i])) {
Use SCTP_PRINTF() instead of printf() in all SCTP sources. MFC after: 3 days
2012-05-04 09:27:00 +00:00
SCTP_PRINTF("Error Mapping array's not clean at clear\n");
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
sctp_print_mapping_array(asoc);
}
}
Fix a bug where SACKs are not sent when they should. Move some protection code to INVARIANTS. Cleanups. MFC after: 3 days.
2010-04-17 12:22:44 +00:00
#endif
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
asoc->mapping_array_base_tsn = asoc->cumulative_tsn + 1;
asoc->highest_tsn_inside_nr_map = asoc->highest_tsn_inside_map = asoc->cumulative_tsn;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else if (at >= 8) {
/* we can slide the mapping array down */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
/* slide_from holds where we hit the first NON 0xff byte */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* now calculate the ceiling of the move using our highest
* TSN value
*/
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
SCTP_CALC_TSN_TO_GAP(lgap, highest_tsn, asoc->mapping_array_base_tsn);
slide_end = (lgap >> 3);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (slide_end < slide_from) {
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
sctp_print_mapping_array(asoc);
- Bug fix managing congestion parameter on immediate retransmittion by handover event (fast mobility code) - Fixed problem of mobility code which is caused by remaining parameters in the deleted primary destination. - Add a missing lock. When a peer sends an INIT, and while we are processing it to send an INIT-ACK the socket is closed, we did not hold a lock to keep the socket from going away. Add protection for this case. - Fix so that arwnd is alway uses the minimal rwnd if the user has set the socket buffer smaller. Found this when the test org decided to see what happens when you set in a rwnd of 10 bytes (which is not allowed per RFC .. 4k is minimum). - Fixes so a cookie-echo ootb will NOT cause an abort to be sent. This was happening in a MPI collision case. - Examined all panics and unless there was no recovery, moved any that were not already to INVARANTS. Approved by: re@freebsd.org (gnn)
2007-10-01 03:22:29 +00:00
#ifdef INVARIANTS
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
panic("impossible slide");
- Bug fix managing congestion parameter on immediate retransmittion by handover event (fast mobility code) - Fixed problem of mobility code which is caused by remaining parameters in the deleted primary destination. - Add a missing lock. When a peer sends an INIT, and while we are processing it to send an INIT-ACK the socket is closed, we did not hold a lock to keep the socket from going away. Add protection for this case. - Fix so that arwnd is alway uses the minimal rwnd if the user has set the socket buffer smaller. Found this when the test org decided to see what happens when you set in a rwnd of 10 bytes (which is not allowed per RFC .. 4k is minimum). - Fixes so a cookie-echo ootb will NOT cause an abort to be sent. This was happening in a MPI collision case. - Examined all panics and unless there was no recovery, moved any that were not already to INVARANTS. Approved by: re@freebsd.org (gnn)
2007-10-01 03:22:29 +00:00
#else
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTP_PRINTF("impossible slide lgap: %x slide_end: %x slide_from: %x? at: %d\n",
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
lgap, slide_end, slide_from, at);
- Bug fix managing congestion parameter on immediate retransmittion by handover event (fast mobility code) - Fixed problem of mobility code which is caused by remaining parameters in the deleted primary destination. - Add a missing lock. When a peer sends an INIT, and while we are processing it to send an INIT-ACK the socket is closed, we did not hold a lock to keep the socket from going away. Add protection for this case. - Fix so that arwnd is alway uses the minimal rwnd if the user has set the socket buffer smaller. Found this when the test org decided to see what happens when you set in a rwnd of 10 bytes (which is not allowed per RFC .. 4k is minimum). - Fixes so a cookie-echo ootb will NOT cause an abort to be sent. This was happening in a MPI collision case. - Examined all panics and unless there was no recovery, moved any that were not already to INVARANTS. Approved by: re@freebsd.org (gnn)
2007-10-01 03:22:29 +00:00
return;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
#endif
}
if (slide_end > asoc->mapping_array_size) {
#ifdef INVARIANTS
panic("would overrun buffer");
#else
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTP_PRINTF("Gak, would have overrun map end: %d slide_end: %d\n",
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
asoc->mapping_array_size, slide_end);
slide_end = asoc->mapping_array_size;
- Bug fix managing congestion parameter on immediate retransmittion by handover event (fast mobility code) - Fixed problem of mobility code which is caused by remaining parameters in the deleted primary destination. - Add a missing lock. When a peer sends an INIT, and while we are processing it to send an INIT-ACK the socket is closed, we did not hold a lock to keep the socket from going away. Add protection for this case. - Fix so that arwnd is alway uses the minimal rwnd if the user has set the socket buffer smaller. Found this when the test org decided to see what happens when you set in a rwnd of 10 bytes (which is not allowed per RFC .. 4k is minimum). - Fixes so a cookie-echo ootb will NOT cause an abort to be sent. This was happening in a MPI collision case. - Examined all panics and unless there was no recovery, moved any that were not already to INVARANTS. Approved by: re@freebsd.org (gnn)
2007-10-01 03:22:29 +00:00
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
distance = (slide_end - slide_from) + 1;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_MAP_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_map(old_base, old_cumack, old_highest,
SCTP_MAP_PREPARE_SLIDE);
sctp_log_map((uint32_t) slide_from, (uint32_t) slide_end,
(uint32_t) lgap, SCTP_MAP_SLIDE_FROM);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (distance + slide_from > asoc->mapping_array_size ||
distance < 0) {
/*
* Here we do NOT slide forward the array so that
* hopefully when more data comes in to fill it up
* we will be able to slide it forward. Really I
* don't think this should happen :-0
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_MAP_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_map((uint32_t) distance, (uint32_t) slide_from,
(uint32_t) asoc->mapping_array_size,
SCTP_MAP_SLIDE_NONE);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
int ii;
for (ii = 0; ii < distance; ii++) {
Fix a bug where SACKs are not sent when they should. Move some protection code to INVARIANTS. Cleanups. MFC after: 3 days.
2010-04-17 12:22:44 +00:00
asoc->mapping_array[ii] = asoc->mapping_array[slide_from + ii];
asoc->nr_mapping_array[ii] = asoc->nr_mapping_array[slide_from + ii];
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Fix a off-by-one bug in zeroing out the mapping arrays. Fix sctp_print_mapping_array(). MFC after: 1 week
2010-04-06 18:57:50 +00:00
for (ii = distance; ii < asoc->mapping_array_size; ii++) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->mapping_array[ii] = 0;
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
asoc->nr_mapping_array[ii] = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Update highest_tsn variables when sliding mapping arrays.
2010-04-20 08:51:21 +00:00
if (asoc->highest_tsn_inside_map + 1 == asoc->mapping_array_base_tsn) {
asoc->highest_tsn_inside_map += (slide_from << 3);
}
if (asoc->highest_tsn_inside_nr_map + 1 == asoc->mapping_array_base_tsn) {
asoc->highest_tsn_inside_nr_map += (slide_from << 3);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->mapping_array_base_tsn += (slide_from << 3);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_MAP_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_map(asoc->mapping_array_base_tsn,
asoc->cumulative_tsn, asoc->highest_tsn_inside_map,
SCTP_MAP_SLIDE_RESULT);
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
}
}
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
}
void
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_sack_check(struct sctp_tcb *stcb, int was_a_gap)
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
{
struct sctp_association *asoc;
uint32_t highest_tsn;
asoc = &stcb->asoc;
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(asoc->highest_tsn_inside_nr_map, asoc->highest_tsn_inside_map)) {
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
highest_tsn = asoc->highest_tsn_inside_nr_map;
} else {
highest_tsn = asoc->highest_tsn_inside_map;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* Now we need to see if we need to queue a sack or just start the
* timer (if allowed).
*/
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
if (SCTP_GET_STATE(asoc) == SCTP_STATE_SHUTDOWN_SENT) {
/*
* Ok special case, in SHUTDOWN-SENT case. here we maker
* sure SACK timer is off and instead send a SHUTDOWN and a
* SACK
*/
if (SCTP_OS_TIMER_PENDING(&stcb->asoc.dack_timer.timer)) {
sctp_timer_stop(SCTP_TIMER_TYPE_RECV,
Fix and cleanup the debug information. This has no user-visible changes. Thanks to Irene Ruengeler for proving a patch. MFC after: 3 days
2015-05-28 16:00:23 +00:00
stcb->sctp_ep, stcb, NULL,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
SCTP_FROM_SCTP_INDATA + SCTP_LOC_17);
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
}
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
sctp_send_shutdown(stcb,
((stcb->asoc.alternate) ? stcb->asoc.alternate : stcb->asoc.primary_destination));
Fix a locking issue showing up on Mac OS X when subscribing to authentication events. DTLS/SCTP renegotiations trigger the bug. MFC after: 2 weeks.
2011-05-08 09:11:59 +00:00
sctp_send_sack(stcb, SCTP_SO_NOT_LOCKED);
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
} else {
int is_a_gap;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
/* is there a gap now ? */
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
is_a_gap = SCTP_TSN_GT(highest_tsn, stcb->asoc.cumulative_tsn);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
/*
* CMT DAC algorithm: increase number of packets received
* since last ack
*/
stcb->asoc.cmt_dac_pkts_rcvd++;
if ((stcb->asoc.send_sack == 1) || /* We need to send a
* SACK */
((was_a_gap) && (is_a_gap == 0)) || /* was a gap, but no
* longer is one */
(stcb->asoc.numduptsns) || /* we have dup's */
(is_a_gap) || /* is still a gap */
(stcb->asoc.delayed_ack == 0) || /* Delayed sack disabled */
(stcb->asoc.data_pkts_seen >= stcb->asoc.sack_freq) /* hit limit of pkts */
) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Improve plausibility check in sctp_handle_sack(). Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP). MFC after: 3 months.
2010-12-22 17:59:38 +00:00
if ((stcb->asoc.sctp_cmt_on_off > 0) &&
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
(SCTP_BASE_SYSCTL(sctp_cmt_use_dac)) &&
(stcb->asoc.send_sack == 0) &&
(stcb->asoc.numduptsns == 0) &&
(stcb->asoc.delayed_ack) &&
(!SCTP_OS_TIMER_PENDING(&stcb->asoc.dack_timer.timer))) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
/*
* CMT DAC algorithm: With CMT, delay acks
* even in the face of
*
* reordering. Therefore, if acks that do not
* have to be sent because of the above
* reasons, will be delayed. That is, acks
* that would have been sent due to gap
* reports will be delayed with DAC. Start
* the delayed ack timer.
*/
sctp_timer_start(SCTP_TIMER_TYPE_RECV,
stcb->sctp_ep, stcb, NULL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
/*
* Ok we must build a SACK since the timer
* is pending, we got our first packet OR
* there are gaps or duplicates.
*/
(void)SCTP_OS_TIMER_STOP(&stcb->asoc.dack_timer.timer);
Fix a locking issue showing up on Mac OS X when subscribing to authentication events. DTLS/SCTP renegotiations trigger the bug. MFC after: 2 weeks.
2011-05-08 09:11:59 +00:00
sctp_send_sack(stcb, SCTP_SO_NOT_LOCKED);
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
}
} else {
if (!SCTP_OS_TIMER_PENDING(&stcb->asoc.dack_timer.timer)) {
sctp_timer_start(SCTP_TIMER_TYPE_RECV,
stcb->sctp_ep, stcb, NULL);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
}
int
sctp_process_data(struct mbuf **mm, int iphlen, int *offset, int length,
Don't take the port numbers for packets containing ABORT chunks from a freed mbuf. Just use them from the stcb. MFC after: 3 days
2015-08-02 16:07:30 +00:00
struct sctp_inpcb *inp, struct sctp_tcb *stcb,
struct sctp_nets *net, uint32_t * high_tsn)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
struct sctp_chunkhdr *ch, chunk_buf;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_association *asoc;
int num_chunks = 0; /* number of control chunks processed */
int stop_proc = 0;
int chk_length, break_flag, last_chunk;
Bugfix: Take also the nr-mapping array into account when detecting gaps. Reviewed by: rrs@ MFC after: 3 days.
2010-12-16 21:01:02 +00:00
int abort_flag = 0, was_a_gap;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct mbuf *m;
Bugfix: Take also the nr-mapping array into account when detecting gaps. Reviewed by: rrs@ MFC after: 3 days.
2010-12-16 21:01:02 +00:00
uint32_t highest_tsn;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* set the rwnd */
sctp_set_rwnd(stcb, &stcb->asoc);
m = *mm;
SCTP_TCB_LOCK_ASSERT(stcb);
asoc = &stcb->asoc;
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(asoc->highest_tsn_inside_nr_map, asoc->highest_tsn_inside_map)) {
Bugfix: Take also the nr-mapping array into account when detecting gaps. Reviewed by: rrs@ MFC after: 3 days.
2010-12-16 21:01:02 +00:00
highest_tsn = asoc->highest_tsn_inside_nr_map;
} else {
highest_tsn = asoc->highest_tsn_inside_map;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
was_a_gap = SCTP_TSN_GT(highest_tsn, stcb->asoc.cumulative_tsn);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* setup where we got the last DATA packet from for any SACK that
* may need to go out. Don't bump the net. This is done ONLY when a
* chunk is assigned.
*/
asoc->last_data_chunk_from = net;
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
/*-
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* Now before we proceed we must figure out if this is a wasted
* cluster... i.e. it is a small packet sent in and yet the driver
* underneath allocated a full cluster for it. If so we must copy it
* to a smaller mbuf and free up the cluster mbuf. This will help
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
* with cluster starvation. Note for __Panda__ we don't do this
* since it has clusters all the way down to 64 bytes.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
if (SCTP_BUF_LEN(m) < (long)MLEN && SCTP_BUF_NEXT(m) == NULL) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* we only handle mbufs that are singletons.. not chains */
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
m = sctp_get_mbuf_for_msg(SCTP_BUF_LEN(m), 0, M_NOWAIT, 1, MT_DATA);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (m) {
/* ok lets see if we can copy the data up */
caddr_t *from, *to;
/* get the pointers and copy */
to = mtod(m, caddr_t *);
from = mtod((*mm), caddr_t *);
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
memcpy(to, from, SCTP_BUF_LEN((*mm)));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* copy the length and free up the old */
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_LEN(m) = SCTP_BUF_LEN((*mm));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_m_freem(*mm);
netinet/sctp*: minor spelling fixes in comments. No functional change. Reviewed by: tuexen
2016-05-02 20:56:11 +00:00
/* success, back copy */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*mm = m;
} else {
/* We are in trouble in the mbuf world .. yikes */
m = *mm;
}
}
/* get pointer to the first chunk header */
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
ch = (struct sctp_chunkhdr *)sctp_m_getptr(m, *offset,
sizeof(struct sctp_chunkhdr), (uint8_t *) & chunk_buf);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (ch == NULL) {
return (1);
}
/*
* process all DATA chunks...
*/
*high_tsn = asoc->cumulative_tsn;
break_flag = 0;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
asoc->data_pkts_seen++;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
while (stop_proc == 0) {
/* validate chunk length */
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
chk_length = ntohs(ch->chunk_length);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (length - *offset < chk_length) {
/* all done, mutulated chunk */
stop_proc = 1;
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if ((asoc->idata_supported == 1) &&
(ch->chunk_type == SCTP_DATA)) {
struct mbuf *op_err;
char msg[SCTP_DIAG_INFO_LEN];
Use a format string in snprintf() for consistency. This was reported by Radek Malcic when using the userland stack in combination with MinGW. MFC after: 1 week
2016-05-12 14:41:53 +00:00
snprintf(msg, sizeof(msg), "%s", "I-DATA chunk received when DATA was negotiated");
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
op_err = sctp_generate_cause(SCTP_CAUSE_PROTOCOL_VIOLATION, msg);
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_18;
sctp_abort_an_association(inp, stcb, op_err, SCTP_SO_NOT_LOCKED);
return (2);
}
if ((asoc->idata_supported == 0) &&
(ch->chunk_type == SCTP_IDATA)) {
struct mbuf *op_err;
char msg[SCTP_DIAG_INFO_LEN];
Use a format string in snprintf() for consistency. This was reported by Radek Malcic when using the userland stack in combination with MinGW. MFC after: 1 week
2016-05-12 14:41:53 +00:00
snprintf(msg, sizeof(msg), "%s", "DATA chunk received when I-DATA was negotiated");
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
op_err = sctp_generate_cause(SCTP_CAUSE_PROTOCOL_VIOLATION, msg);
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_19;
sctp_abort_an_association(inp, stcb, op_err, SCTP_SO_NOT_LOCKED);
return (2);
}
if ((ch->chunk_type == SCTP_DATA) ||
(ch->chunk_type == SCTP_IDATA)) {
int clen;
if (ch->chunk_type == SCTP_DATA) {
clen = sizeof(struct sctp_data_chunk);
} else {
clen = sizeof(struct sctp_idata_chunk);
}
Fix signed/unsigned warnings.
2016-04-18 11:39:41 +00:00
if (chk_length < clen) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* Need to send an abort since we had a
* invalid data chunk.
*/
struct mbuf *op_err;
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
char msg[SCTP_DIAG_INFO_LEN];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
snprintf(msg, sizeof(msg), "DATA chunk of length %d",
chk_length);
op_err = sctp_generate_cause(SCTP_CAUSE_PROTOCOL_VIOLATION, msg);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_20;
Don't take the port numbers for packets containing ABORT chunks from a freed mbuf. Just use them from the stcb. MFC after: 3 days
2015-08-02 16:07:30 +00:00
sctp_abort_an_association(inp, stcb, op_err, SCTP_SO_NOT_LOCKED);
Send the correct error cause, when a DATA chunk with no user data is received. This bug was reported by Irene Ruengeler. MFC after: 3 days
2014-04-19 19:21:06 +00:00
return (2);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP_AUDITING_ENABLED
sctp_audit_log(0xB1, 0);
#endif
if (SCTP_SIZE32(chk_length) == (length - *offset)) {
last_chunk = 1;
} else {
last_chunk = 0;
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (sctp_process_a_data_chunk(stcb, asoc, mm, *offset,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
chk_length, net, high_tsn, &abort_flag, &break_flag,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
last_chunk, ch->chunk_type)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
num_chunks++;
}
if (abort_flag)
return (2);
if (break_flag) {
/*
* Set because of out of rwnd space and no
* drop rep space left.
*/
stop_proc = 1;
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
} else {
/* not a data chunk in the data region */
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
switch (ch->chunk_type) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
case SCTP_INITIATION:
case SCTP_INITIATION_ACK:
case SCTP_SELECTIVE_ACK:
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
case SCTP_NR_SELECTIVE_ACK:
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
case SCTP_HEARTBEAT_REQUEST:
case SCTP_HEARTBEAT_ACK:
case SCTP_ABORT_ASSOCIATION:
case SCTP_SHUTDOWN:
case SCTP_SHUTDOWN_ACK:
case SCTP_OPERATION_ERROR:
case SCTP_COOKIE_ECHO:
case SCTP_COOKIE_ACK:
case SCTP_ECN_ECHO:
case SCTP_ECN_CWR:
case SCTP_SHUTDOWN_COMPLETE:
case SCTP_AUTHENTICATION:
case SCTP_ASCONF_ACK:
case SCTP_PACKET_DROPPED:
case SCTP_STREAM_RESET:
case SCTP_FORWARD_CUM_TSN:
case SCTP_ASCONF:
Retire net.inet.sctp.strict_sacks and net.inet.sctp.strict_data_order sysctl's, since they where only there to interop with non-conformant implementations. This should not be a problem anymore.
2016-05-12 16:34:59 +00:00
{
/*
* Now, what do we do with KNOWN
* chunks that are NOT in the right
* place?
*
* For now, I do nothing but ignore
* them. We may later want to add
* sysctl stuff to switch out and do
* either an ABORT() or possibly
* process them.
*/
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct mbuf *op_err;
Provide consistent error causes whenever an ABORT chunk is sent. MFC after: 1 week
2015-07-27 22:35:54 +00:00
char msg[SCTP_DIAG_INFO_LEN];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Fix a typo reported by Erik Cederstrand. MFC after: 1 week
2015-07-28 08:50:13 +00:00
snprintf(msg, sizeof(msg), "DATA chunk followed by chunk of type %2.2x",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
ch->chunk_type);
Provide consistent error causes whenever an ABORT chunk is sent. MFC after: 1 week
2015-07-27 22:35:54 +00:00
op_err = sctp_generate_cause(SCTP_CAUSE_PROTOCOL_VIOLATION, msg);
Don't take the port numbers for packets containing ABORT chunks from a freed mbuf. Just use them from the stcb. MFC after: 3 days
2015-08-02 16:07:30 +00:00
sctp_abort_an_association(inp, stcb, op_err, SCTP_SO_NOT_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (2);
}
default:
/* unknown chunk type, use bit rules */
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (ch->chunk_type & 0x40) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Add a error report to the queue */
Cleanup the handling of error causes for ERROR chunks. This fixes an inconsistency of the padding handling. The final padding is now considered to be a chunk padding. MFC after: 1 week
2015-09-12 17:08:51 +00:00
struct mbuf *op_err;
struct sctp_gen_error_cause *cause;
op_err = sctp_get_mbuf_for_msg(sizeof(struct sctp_gen_error_cause),
0, M_NOWAIT, 1, MT_DATA);
if (op_err != NULL) {
cause = mtod(op_err, struct sctp_gen_error_cause *);
cause->code = htons(SCTP_CAUSE_UNRECOG_CHUNK);
Improve compilation on windows 64-bit (for the userland stack). MFC after: 1 week
2016-03-27 10:04:25 +00:00
cause->length = htons((uint16_t) (chk_length + sizeof(struct sctp_gen_error_cause)));
Cleanup the handling of error causes for ERROR chunks. This fixes an inconsistency of the padding handling. The final padding is now considered to be a chunk padding. MFC after: 1 week
2015-09-12 17:08:51 +00:00
SCTP_BUF_LEN(op_err) = sizeof(struct sctp_gen_error_cause);
SCTP_BUF_NEXT(op_err) = SCTP_M_COPYM(m, *offset, chk_length, M_NOWAIT);
if (SCTP_BUF_NEXT(op_err) != NULL) {
sctp_queue_op_err(stcb, op_err);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
Cleanup the handling of error causes for ERROR chunks. This fixes an inconsistency of the padding handling. The final padding is now considered to be a chunk padding. MFC after: 1 week
2015-09-12 17:08:51 +00:00
sctp_m_freem(op_err);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if ((ch->chunk_type & 0x80) == 0) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* discard the rest of this packet */
stop_proc = 1;
} /* else skip this bad chunk and
* continue... */
break;
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
} /* switch of chunk type */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
*offset += SCTP_SIZE32(chk_length);
if ((*offset >= length) || stop_proc) {
/* no more data left in the mbuf chain */
stop_proc = 1;
continue;
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
ch = (struct sctp_chunkhdr *)sctp_m_getptr(m, *offset,
sizeof(struct sctp_chunkhdr), (uint8_t *) & chunk_buf);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (ch == NULL) {
*offset = length;
stop_proc = 1;
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (break_flag) {
/*
* we need to report rwnd overrun drops.
*/
Pass the packet length explicitly around. MFC after: 3 days
2012-06-24 23:12:24 +00:00
sctp_send_packet_dropped(stcb, net, *mm, length, iphlen, 0);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
if (num_chunks) {
/*
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
* Did we get data, if so update the time for auto-close and
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* give peer credit for being alive.
*/
SCTP_STAT_INCR(sctps_recvpktwithdata);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_THRESHOLD_LOGGING) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
sctp_misc_ints(SCTP_THRESHOLD_CLEAR,
stcb->asoc.overall_error_count,
0,
SCTP_FROM_SCTP_INDATA,
__LINE__);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
stcb->asoc.overall_error_count = 0;
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_GETTIME_TIMEVAL(&stcb->asoc.time_last_rcvd);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* now service all of the reassm queue if needed */
if (SCTP_GET_STATE(asoc) == SCTP_STATE_SHUTDOWN_SENT) {
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* Assure that we ack right away */
stcb->asoc.send_sack = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* Start a sack timer or QUEUE a SACK for sending */
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_sack_check(stcb, was_a_gap);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (0);
}
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
static int
sctp_process_segment_range(struct sctp_tcb *stcb, struct sctp_tmit_chunk **p_tp1, uint32_t last_tsn,
uint16_t frag_strt, uint16_t frag_end, int nr_sacking,
int *num_frs,
uint32_t * biggest_newly_acked_tsn,
uint32_t * this_sack_lowest_newack,
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
int *rto_ok)
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
{
struct sctp_tmit_chunk *tp1;
unsigned int theTSN;
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
int j, wake_him = 0, circled = 0;
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
/* Recover the tp1 we last saw */
tp1 = *p_tp1;
if (tp1 == NULL) {
tp1 = TAILQ_FIRST(&stcb->asoc.sent_queue);
}
for (j = frag_strt; j <= frag_end; j++) {
theTSN = j + last_tsn;
while (tp1) {
if (tp1->rec.data.doing_fast_retransmit)
(*num_frs) += 1;
/*-
* CMT: CUCv2 algorithm. For each TSN being
* processed from the sent queue, track the
* next expected pseudo-cumack, or
* rtx_pseudo_cumack, if required. Separate
* cumack trackers for first transmissions,
* and retransmissions.
*/
Fix the bug in the handling of fragmented abandoned SCTP user messages reported in https://code.google.com/p/sctp-refimpl/issues/detail?id=11 Thanks to Lally Singh for reporting it. MFC after: 3 days
2015-03-24 15:05:36 +00:00
if ((tp1->sent < SCTP_DATAGRAM_RESEND) &&
(tp1->whoTo->find_pseudo_cumack == 1) &&
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
(tp1->snd_count == 1)) {
tp1->whoTo->pseudo_cumack = tp1->rec.data.TSN_seq;
tp1->whoTo->find_pseudo_cumack = 0;
}
Fix the bug in the handling of fragmented abandoned SCTP user messages reported in https://code.google.com/p/sctp-refimpl/issues/detail?id=11 Thanks to Lally Singh for reporting it. MFC after: 3 days
2015-03-24 15:05:36 +00:00
if ((tp1->sent < SCTP_DATAGRAM_RESEND) &&
(tp1->whoTo->find_rtx_pseudo_cumack == 1) &&
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
(tp1->snd_count > 1)) {
tp1->whoTo->rtx_pseudo_cumack = tp1->rec.data.TSN_seq;
tp1->whoTo->find_rtx_pseudo_cumack = 0;
}
if (tp1->rec.data.TSN_seq == theTSN) {
if (tp1->sent != SCTP_DATAGRAM_UNSENT) {
/*-
* must be held until
* cum-ack passes
*/
if (tp1->sent < SCTP_DATAGRAM_RESEND) {
/*-
* If it is less than RESEND, it is
* now no-longer in flight.
* Higher values may already be set
* via previous Gap Ack Blocks...
* i.e. ACKED or RESEND.
*/
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tp1->rec.data.TSN_seq,
*biggest_newly_acked_tsn)) {
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
*biggest_newly_acked_tsn = tp1->rec.data.TSN_seq;
}
/*-
* CMT: SFR algo (and HTNA) - set
* saw_newack to 1 for dest being
* newly acked. update
* this_sack_highest_newack if
* appropriate.
*/
if (tp1->rec.data.chunk_was_revoked == 0)
tp1->whoTo->saw_newack = 1;
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tp1->rec.data.TSN_seq,
tp1->whoTo->this_sack_highest_newack)) {
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
tp1->whoTo->this_sack_highest_newack =
tp1->rec.data.TSN_seq;
}
/*-
* CMT DAC algo: also update
* this_sack_lowest_newack
*/
if (*this_sack_lowest_newack == 0) {
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_SACK_LOGGING_ENABLE) {
sctp_log_sack(*this_sack_lowest_newack,
last_tsn,
tp1->rec.data.TSN_seq,
0,
0,
SCTP_LOG_TSN_ACKED);
}
*this_sack_lowest_newack = tp1->rec.data.TSN_seq;
}
/*-
* CMT: CUCv2 algorithm. If (rtx-)pseudo-cumack for corresp
* dest is being acked, then we have a new (rtx-)pseudo-cumack. Set
* new_(rtx_)pseudo_cumack to TRUE so that the cwnd for this dest can be
* updated. Also trigger search for the next expected (rtx-)pseudo-cumack.
* Separate pseudo_cumack trackers for first transmissions and
* retransmissions.
*/
if (tp1->rec.data.TSN_seq == tp1->whoTo->pseudo_cumack) {
if (tp1->rec.data.chunk_was_revoked == 0) {
tp1->whoTo->new_pseudo_cumack = 1;
}
tp1->whoTo->find_pseudo_cumack = 1;
}
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_CWND_LOGGING_ENABLE) {
sctp_log_cwnd(stcb, tp1->whoTo, tp1->rec.data.TSN_seq, SCTP_CWND_LOG_FROM_SACK);
}
if (tp1->rec.data.TSN_seq == tp1->whoTo->rtx_pseudo_cumack) {
if (tp1->rec.data.chunk_was_revoked == 0) {
tp1->whoTo->new_pseudo_cumack = 1;
}
tp1->whoTo->find_rtx_pseudo_cumack = 1;
}
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_SACK_LOGGING_ENABLE) {
sctp_log_sack(*biggest_newly_acked_tsn,
last_tsn,
tp1->rec.data.TSN_seq,
frag_strt,
frag_end,
SCTP_LOG_TSN_ACKED);
}
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FLIGHT_LOGGING_ENABLE) {
sctp_misc_ints(SCTP_FLIGHT_LOG_DOWN_GAP,
tp1->whoTo->flight_size,
tp1->book_size,
Improve compilation on windows 64-bit (for the userland stack). MFC after: 1 week
2016-03-27 10:04:25 +00:00
(uint32_t) (uintptr_t) tp1->whoTo,
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
tp1->rec.data.TSN_seq);
}
sctp_flight_size_decrease(tp1);
Improvements to CC modules: 1) Add four new points that allow you to get more information to cc algo's 2) Fix the case where user changes module on a existing TCB, in such a case, the initialization module needs to be called on all nets. 3) Move htcp_cc structure to a union that other modules can use. 4) Add 5th point for get/set socket options for cc_module specific options MFC after: 2 months
2011-02-26 15:23:46 +00:00
if (stcb->asoc.cc_functions.sctp_cwnd_update_tsn_acknowledged) {
(*stcb->asoc.cc_functions.sctp_cwnd_update_tsn_acknowledged) (tp1->whoTo,
tp1);
}
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
sctp_total_flight_decrease(stcb, tp1);
tp1->whoTo->net_ack += tp1->send_size;
if (tp1->snd_count < 2) {
/*-
* True non-retransmited chunk
*/
tp1->whoTo->net_ack2 += tp1->send_size;
/*-
* update RTO too ?
*/
if (tp1->do_rtt) {
Tunes and fixes the new DC-CC to seem to hit the right mix. Still may need some tweaks but it appears to almost not give away too much to an RFC2581 flow, but can really minimize the amount of buffers used in the net. MFC after: 3 months
2011-03-08 11:58:25 +00:00
if (*rto_ok) {
tp1->whoTo->RTO =
sctp_calculate_rto(stcb,
&stcb->asoc,
tp1->whoTo,
&tp1->sent_rcv_time,
sctp_align_safe_nocopy,
SCTP_RTT_FROM_DATA);
*rto_ok = 0;
}
if (tp1->whoTo->rto_needed == 0) {
tp1->whoTo->rto_needed = 1;
}
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
tp1->do_rtt = 0;
}
}
}
if (tp1->sent <= SCTP_DATAGRAM_RESEND) {
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tp1->rec.data.TSN_seq,
stcb->asoc.this_sack_highest_gap)) {
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
stcb->asoc.this_sack_highest_gap =
tp1->rec.data.TSN_seq;
}
if (tp1->sent == SCTP_DATAGRAM_RESEND) {
sctp_ucount_decr(stcb->asoc.sent_queue_retran_cnt);
#ifdef SCTP_AUDITING_ENABLED
sctp_audit_log(0xB2,
(stcb->asoc.sent_queue_retran_cnt & 0x000000ff));
#endif
}
}
/*-
* All chunks NOT UNSENT fall through here and are marked
* (leave PR-SCTP ones that are to skip alone though)
*/
Add some missing changes missed in the last commit. MFC after: 1 week X-MFC with: 242708
2012-11-07 21:25:32 +00:00
if ((tp1->sent != SCTP_FORWARD_TSN_SKIP) &&
Get the accounting working. We now have counters how many chunks for each SCTP outgoing stream are in the send and sent queue. While there, improve the naming of NR-SACK related constants recently introduced. MFC after: 1 week
2012-11-16 19:39:10 +00:00
(tp1->sent != SCTP_DATAGRAM_NR_ACKED)) {
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
tp1->sent = SCTP_DATAGRAM_MARKED;
Add some missing changes missed in the last commit. MFC after: 1 week X-MFC with: 242708
2012-11-07 21:25:32 +00:00
}
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
if (tp1->rec.data.chunk_was_revoked) {
/* deflate the cwnd */
tp1->whoTo->cwnd -= tp1->book_size;
tp1->rec.data.chunk_was_revoked = 0;
}
/* NR Sack code here */
Get the accounting working. We now have counters how many chunks for each SCTP outgoing stream are in the send and sent queue. While there, improve the naming of NR-SACK related constants recently introduced. MFC after: 1 week
2012-11-16 19:39:10 +00:00
if (nr_sacking &&
(tp1->sent != SCTP_DATAGRAM_NR_ACKED)) {
if (stcb->asoc.strmout[tp1->rec.data.stream_number].chunks_on_queues > 0) {
stcb->asoc.strmout[tp1->rec.data.stream_number].chunks_on_queues--;
#ifdef INVARIANTS
} else {
panic("No chunks on the queues for sid %u.", tp1->rec.data.stream_number);
#endif
}
Ensure that outgoing streams get reset when they run dry. MFC after: 1 week
2015-12-03 15:19:29 +00:00
if ((stcb->asoc.strmout[tp1->rec.data.stream_number].chunks_on_queues == 0) &&
(stcb->asoc.strmout[tp1->rec.data.stream_number].state == SCTP_STREAM_RESET_PENDING) &&
TAILQ_EMPTY(&stcb->asoc.strmout[tp1->rec.data.stream_number].outqueue)) {
stcb->asoc.trigger_reset = 1;
}
Get the accounting working. We now have counters how many chunks for each SCTP outgoing stream are in the send and sent queue. While there, improve the naming of NR-SACK related constants recently introduced. MFC after: 1 week
2012-11-16 19:39:10 +00:00
tp1->sent = SCTP_DATAGRAM_NR_ACKED;
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
if (tp1->data) {
/*
* sa_ignore
* NO_NULL_CHK
*/
sctp_free_bufspace(stcb, &stcb->asoc, tp1, 1);
sctp_m_freem(tp1->data);
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
tp1->data = NULL;
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
}
wake_him++;
}
}
break;
} /* if (tp1->TSN_seq == theTSN) */
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tp1->rec.data.TSN_seq, theTSN)) {
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
break;
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
}
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
tp1 = TAILQ_NEXT(tp1, sctp_next);
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
if ((tp1 == NULL) && (circled == 0)) {
circled++;
tp1 = TAILQ_FIRST(&stcb->asoc.sent_queue);
}
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
} /* end while (tp1) */
if (tp1 == NULL) {
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
circled = 0;
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
tp1 = TAILQ_FIRST(&stcb->asoc.sent_queue);
}
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
/* In case the fragments were not in order we must reset */
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
} /* end for (j = fragStart */
*p_tp1 = tp1;
return (wake_him); /* Return value only used for nr-sack */
}
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
static int
- Issue one, new stack reduction left packet_drop handling still thinking it had the whole chunk. This could cause a crash if a large packet drop came in. Fixed by adjusting the trunc length down to the limit. - Large sacks with lots of segments could also have same issue. Changed duplicate and segment handling to use proper get_m_ptr function to pull each block from mbuf chains.
2007-06-15 17:59:57 +00:00
sctp_handle_segments(struct mbuf *m, int *offset, struct sctp_tcb *stcb, struct sctp_association *asoc,
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
uint32_t last_tsn, uint32_t * biggest_tsn_acked,
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
uint32_t * biggest_newly_acked_tsn, uint32_t * this_sack_lowest_newack,
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
int num_seg, int num_nr_seg, int *rto_ok)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
- Issue one, new stack reduction left packet_drop handling still thinking it had the whole chunk. This could cause a crash if a large packet drop came in. Fixed by adjusting the trunc length down to the limit. - Large sacks with lots of segments could also have same issue. Changed duplicate and segment handling to use proper get_m_ptr function to pull each block from mbuf chains.
2007-06-15 17:59:57 +00:00
struct sctp_gap_ack_block *frag, block;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_tmit_chunk *tp1;
This fixes two bugs in the NR-Sack code: 1) When calculating the table offset for sliding the sack array, the two byte values must be "ored" together in order for us to do the correct sliding of the arrays. 2) We were NOT properly doing CC and other changes to things only NR-Sacked. The solution here is to make a separate function that will actually do both CC/updates and free things if its NR sack'd. This actually shrinks out common code from three places (much better). MFC after: 3 days
2009-08-24 11:13:32 +00:00
int i;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
int num_frs = 0;
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
int chunk_freed;
int non_revocable;
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
uint16_t frag_strt, frag_end, prev_frag_end;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
tp1 = TAILQ_FIRST(&asoc->sent_queue);
prev_frag_end = 0;
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
chunk_freed = 0;
for (i = 0; i < (num_seg + num_nr_seg); i++) {
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
if (i == num_seg) {
prev_frag_end = 0;
tp1 = TAILQ_FIRST(&asoc->sent_queue);
}
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
frag = (struct sctp_gap_ack_block *)sctp_m_getptr(m, *offset,
sizeof(struct sctp_gap_ack_block), (uint8_t *) & block);
*offset += sizeof(block);
if (frag == NULL) {
return (chunk_freed);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
frag_strt = ntohs(frag->start);
frag_end = ntohs(frag->end);
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (frag_strt > frag_end) {
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
/* This gap report is malformed, skip it. */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
if (frag_strt <= prev_frag_end) {
/* This gap report is not in order, so restart. */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
tp1 = TAILQ_FIRST(&asoc->sent_queue);
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
}
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT((last_tsn + frag_end), *biggest_tsn_acked)) {
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
*biggest_tsn_acked = last_tsn + frag_end;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
if (i < num_seg) {
non_revocable = 0;
} else {
non_revocable = 1;
}
if (sctp_process_segment_range(stcb, &tp1, last_tsn, frag_strt, frag_end,
non_revocable, &num_frs, biggest_newly_acked_tsn,
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
this_sack_lowest_newack, rto_ok)) {
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
chunk_freed = 1;
- Issue one, new stack reduction left packet_drop handling still thinking it had the whole chunk. This could cause a crash if a large packet drop came in. Fixed by adjusting the trunc length down to the limit. - Large sacks with lots of segments could also have same issue. Changed duplicate and segment handling to use proper get_m_ptr function to pull each block from mbuf chains.
2007-06-15 17:59:57 +00:00
}
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
prev_frag_end = frag_end;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FR_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
if (num_frs)
sctp_log_fr(*biggest_tsn_acked,
*biggest_newly_acked_tsn,
last_tsn, SCTP_FR_LOG_BIGGEST_TSNS);
}
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
return (chunk_freed);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
static void
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
sctp_check_for_revoked(struct sctp_tcb *stcb,
struct sctp_association *asoc, uint32_t cumack,
Use uint32_t instead of u_long. MFC after: 1 week
2010-02-18 13:46:54 +00:00
uint32_t biggest_tsn_acked)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_tmit_chunk *tp1;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH(tp1, &asoc->sent_queue, sctp_next) {
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tp1->rec.data.TSN_seq, cumack)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* ok this guy is either ACK or MARKED. If it is
* ACKED it has been previously acked but not this
* time i.e. revoked. If it is MARKED it was ACK'ed
* again.
*/
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tp1->rec.data.TSN_seq, biggest_tsn_acked)) {
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
break;
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (tp1->sent == SCTP_DATAGRAM_ACKED) {
/* it has been revoked */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
tp1->sent = SCTP_DATAGRAM_SENT;
tp1->rec.data.chunk_was_revoked = 1;
/*
* We must add this stuff back in to assure
* timers and such get started.
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FLIGHT_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_misc_ints(SCTP_FLIGHT_LOG_UP_REVOKE,
tp1->whoTo->flight_size,
tp1->book_size,
Improve compilation on windows 64-bit (for the userland stack). MFC after: 1 week
2016-03-27 10:04:25 +00:00
(uint32_t) (uintptr_t) tp1->whoTo,
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
tp1->rec.data.TSN_seq);
}
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
sctp_flight_size_increase(tp1);
sctp_total_flight_increase(stcb, tp1);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/*
* We inflate the cwnd to compensate for our
* artificial inflation of the flight_size.
*/
tp1->whoTo->cwnd += tp1->book_size;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_SACK_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_sack(asoc->last_acked_seq,
cumack,
tp1->rec.data.TSN_seq,
0,
0,
SCTP_LOG_TSN_REVOKED);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else if (tp1->sent == SCTP_DATAGRAM_MARKED) {
/* it has been re-acked in this SACK */
tp1->sent = SCTP_DATAGRAM_ACKED;
}
}
if (tp1->sent == SCTP_DATAGRAM_UNSENT)
break;
}
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
static void
sctp_strike_gap_ack_chunks(struct sctp_tcb *stcb, struct sctp_association *asoc,
Use uint32_t instead of u_long. MFC after: 1 week
2010-02-18 13:46:54 +00:00
uint32_t biggest_tsn_acked, uint32_t biggest_tsn_newly_acked, uint32_t this_sack_lowest_newack, int accum_moved)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_tmit_chunk *tp1;
int strike_flag = 0;
struct timeval now;
int tot_retrans = 0;
uint32_t sending_seq;
struct sctp_nets *net;
int num_dests_sacked = 0;
/*
* select the sending_seq, this is either the next thing ready to be
* sent but not transmitted, OR, the next seq we assign.
*/
tp1 = TAILQ_FIRST(&stcb->asoc.send_queue);
if (tp1 == NULL) {
sending_seq = asoc->sending_seq;
} else {
sending_seq = tp1->rec.data.TSN_seq;
}
/* CMT DAC algo: finding out if SACK is a mixed SACK */
Improve plausibility check in sctp_handle_sack(). Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP). MFC after: 3 months.
2010-12-22 17:59:38 +00:00
if ((asoc->sctp_cmt_on_off > 0) &&
Fix the switching on/off of CMT using sysctl and socket option. Fix the switching on/off of PF and NR-SACKs using sysctl. Add minor improvement in handling malloc failures. Improve the address checks when sending. MFC after: 4 weeks
2010-08-28 17:59:51 +00:00
SCTP_BASE_SYSCTL(sctp_cmt_use_dac)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
if (net->saw_newack)
num_dests_sacked++;
}
}
Add support for the SCTP_PR_SUPPORTED socket option as specified in http://tools.ietf.org/html/draft-ietf-tsvwg-sctp-prpolicies Add also a sysctl controlling the default of the end-points. MFC after: 1 week
2014-08-02 21:36:40 +00:00
if (stcb->asoc.prsctp_supported) {
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_GETTIME_TIMEVAL(&now);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH(tp1, &asoc->sent_queue, sctp_next) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
strike_flag = 0;
if (tp1->no_fr_allowed) {
/* this one had a timeout or something */
continue;
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FR_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
if (tp1->sent < SCTP_DATAGRAM_RESEND)
sctp_log_fr(biggest_tsn_newly_acked,
tp1->rec.data.TSN_seq,
tp1->sent,
SCTP_FR_LOG_CHECK_STRIKE);
}
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tp1->rec.data.TSN_seq, biggest_tsn_acked) ||
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
tp1->sent == SCTP_DATAGRAM_UNSENT) {
/* done */
break;
}
Add support for the SCTP_PR_SUPPORTED socket option as specified in http://tools.ietf.org/html/draft-ietf-tsvwg-sctp-prpolicies Add also a sysctl controlling the default of the end-points. MFC after: 1 week
2014-08-02 21:36:40 +00:00
if (stcb->asoc.prsctp_supported) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if ((PR_SCTP_TTL_ENABLED(tp1->flags)) && tp1->sent < SCTP_DATAGRAM_ACKED) {
/* Is it expired? */
Fix a bug where the wrong PR-SCTP policy was considered. While there, use always the same code for the check of TTL expiration. MFC after: 2 weeks.
2010-09-17 19:20:39 +00:00
if (timevalcmp(&now, &tp1->rec.data.timetodrop, >)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Yes so drop it */
if (tp1->data != NULL) {
Provide in the SCTP_SEND_FAILED and SCTP_SEND_FAILED_EVENT notifications the correct ssf_error or ssfe_error as required by RFC 6458. MFC after: 3 days
2012-05-13 19:32:49 +00:00
(void)sctp_release_pr_sctp_chunk(stcb, tp1, 1,
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
SCTP_SO_NOT_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
continue;
}
}
}
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tp1->rec.data.TSN_seq, asoc->this_sack_highest_gap)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* we are beyond the tsn in the sack */
break;
}
if (tp1->sent >= SCTP_DATAGRAM_RESEND) {
/* either a RESEND, ACKED, or MARKED */
/* skip */
PR SCTP Bugs. Basically a full sized frame of PR SCTP FWD-TSN's would not be sent and thus cause a stalled connection. Also the rwnd Calculation was also off on the receiver side for PR-SCTP. MFC after: 1 month
2010-07-29 11:37:04 +00:00
if (tp1->sent == SCTP_FORWARD_TSN_SKIP) {
/* Continue strikin FWD-TSN chunks */
tp1->rec.data.fwd_tsn_cnt++;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
/*
* CMT : SFR algo (covers part of DAC and HTNA as well)
*/
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
if (tp1->whoTo && tp1->whoTo->saw_newack == 0) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* No new acks were receieved for data sent to this
* dest. Therefore, according to the SFR algo for
* CMT, no data sent to this dest can be marked for
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
* FR using this SACK.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
continue;
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
} else if (tp1->whoTo && SCTP_TSN_GT(tp1->rec.data.TSN_seq,
tp1->whoTo->this_sack_highest_newack)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* CMT: New acks were receieved for data sent to
* this dest. But no new acks were seen for data
* sent after tp1. Therefore, according to the SFR
* algo for CMT, tp1 cannot be marked for FR using
* this SACK. This step covers part of the DAC algo
* and the HTNA algo as well.
*/
continue;
}
/*
* Here we check to see if we were have already done a FR
* and if so we see if the biggest TSN we saw in the sack is
* smaller than the recovery point. If so we don't strike
* the tsn... otherwise we CAN strike the TSN.
*/
/*
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
* @@@ JRI: Check for CMT if (accum_moved &&
* asoc->fast_retran_loss_recovery && (sctp_cmt_on_off ==
* 0)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (accum_moved && asoc->fast_retran_loss_recovery) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* Strike the TSN if in fast-recovery and cum-ack
* moved.
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FR_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_fr(biggest_tsn_newly_acked,
tp1->rec.data.TSN_seq,
tp1->sent,
SCTP_FR_LOG_STRIKE_CHUNK);
}
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
if (tp1->sent < SCTP_DATAGRAM_RESEND) {
tp1->sent++;
}
Improve plausibility check in sctp_handle_sack(). Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP). MFC after: 3 months.
2010-12-22 17:59:38 +00:00
if ((asoc->sctp_cmt_on_off > 0) &&
Fix the switching on/off of CMT using sysctl and socket option. Fix the switching on/off of PF and NR-SACKs using sysctl. Add minor improvement in handling malloc failures. Improve the address checks when sending. MFC after: 4 weeks
2010-08-28 17:59:51 +00:00
SCTP_BASE_SYSCTL(sctp_cmt_use_dac)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* CMT DAC algorithm: If SACK flag is set to
* 0, then lowest_newack test will not pass
* because it would have been set to the
* cumack earlier. If not already to be
* rtx'd, If not a mixed sack and if tp1 is
* not between two sacked TSNs, then mark by
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
* one more. NOTE that we are marking by one
* additional time since the SACK DAC flag
* indicates that two packets have been
* received after this missing TSN.
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
*/
if ((tp1->sent < SCTP_DATAGRAM_RESEND) && (num_dests_sacked == 1) &&
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
SCTP_TSN_GT(this_sack_lowest_newack, tp1->rec.data.TSN_seq)) {
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FR_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_fr(16 + num_dests_sacked,
tp1->rec.data.TSN_seq,
tp1->sent,
SCTP_FR_LOG_STRIKE_CHUNK);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
tp1->sent++;
}
}
Fix the switching on/off of CMT using sysctl and socket option. Fix the switching on/off of PF and NR-SACKs using sysctl. Add minor improvement in handling malloc failures. Improve the address checks when sending. MFC after: 4 weeks
2010-08-28 17:59:51 +00:00
} else if ((tp1->rec.data.doing_fast_retransmit) &&
(asoc->sctp_cmt_on_off == 0)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* For those that have done a FR we must take
* special consideration if we strike. I.e the
* biggest_newly_acked must be higher than the
* sending_seq at the time we did the FR.
*/
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
if (
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP_FR_TO_ALTERNATE
/*
* If FR's go to new networks, then we must only do
* this for singly homed asoc's. However if the FR's
* go to the same network (Armando's work) then its
* ok to FR multiple times.
*/
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
(asoc->numnets < 2)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#else
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
(1)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#endif
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
) {
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GE(biggest_tsn_newly_acked,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
tp1->rec.data.fast_retran_tsn)) {
/*
* Strike the TSN, since this ack is
* beyond where things were when we
* did a FR.
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FR_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_fr(biggest_tsn_newly_acked,
tp1->rec.data.TSN_seq,
tp1->sent,
SCTP_FR_LOG_STRIKE_CHUNK);
}
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
if (tp1->sent < SCTP_DATAGRAM_RESEND) {
tp1->sent++;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
strike_flag = 1;
Improve plausibility check in sctp_handle_sack(). Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP). MFC after: 3 months.
2010-12-22 17:59:38 +00:00
if ((asoc->sctp_cmt_on_off > 0) &&
Fix the switching on/off of CMT using sysctl and socket option. Fix the switching on/off of PF and NR-SACKs using sysctl. Add minor improvement in handling malloc failures. Improve the address checks when sending. MFC after: 4 weeks
2010-08-28 17:59:51 +00:00
SCTP_BASE_SYSCTL(sctp_cmt_use_dac)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* CMT DAC algorithm: If
* SACK flag is set to 0,
* then lowest_newack test
* will not pass because it
* would have been set to
* the cumack earlier. If
* not already to be rtx'd,
* If not a mixed sack and
* if tp1 is not between two
* sacked TSNs, then mark by
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
* one more. NOTE that we
* are marking by one
* additional time since the
* SACK DAC flag indicates
* that two packets have
* been received after this
* missing TSN.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
if ((tp1->sent < SCTP_DATAGRAM_RESEND) &&
(num_dests_sacked == 1) &&
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
SCTP_TSN_GT(this_sack_lowest_newack,
tp1->rec.data.TSN_seq)) {
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FR_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_fr(32 + num_dests_sacked,
tp1->rec.data.TSN_seq,
tp1->sent,
SCTP_FR_LOG_STRIKE_CHUNK);
}
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
if (tp1->sent < SCTP_DATAGRAM_RESEND) {
tp1->sent++;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
}
/*
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
* JRI: TODO: remove code for HTNA algo. CMT's SFR
* algo covers HTNA.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
} else if (SCTP_TSN_GT(tp1->rec.data.TSN_seq,
biggest_tsn_newly_acked)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* We don't strike these: This is the HTNA
* algorithm i.e. we don't strike If our TSN is
* larger than the Highest TSN Newly Acked.
*/
;
} else {
/* Strike the TSN */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FR_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_fr(biggest_tsn_newly_acked,
tp1->rec.data.TSN_seq,
tp1->sent,
SCTP_FR_LOG_STRIKE_CHUNK);
}
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
if (tp1->sent < SCTP_DATAGRAM_RESEND) {
tp1->sent++;
}
Improve plausibility check in sctp_handle_sack(). Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP). MFC after: 3 months.
2010-12-22 17:59:38 +00:00
if ((asoc->sctp_cmt_on_off > 0) &&
Fix the switching on/off of CMT using sysctl and socket option. Fix the switching on/off of PF and NR-SACKs using sysctl. Add minor improvement in handling malloc failures. Improve the address checks when sending. MFC after: 4 weeks
2010-08-28 17:59:51 +00:00
SCTP_BASE_SYSCTL(sctp_cmt_use_dac)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* CMT DAC algorithm: If SACK flag is set to
* 0, then lowest_newack test will not pass
* because it would have been set to the
* cumack earlier. If not already to be
* rtx'd, If not a mixed sack and if tp1 is
* not between two sacked TSNs, then mark by
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
* one more. NOTE that we are marking by one
* additional time since the SACK DAC flag
* indicates that two packets have been
* received after this missing TSN.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
if ((tp1->sent < SCTP_DATAGRAM_RESEND) && (num_dests_sacked == 1) &&
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
SCTP_TSN_GT(this_sack_lowest_newack, tp1->rec.data.TSN_seq)) {
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FR_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_fr(48 + num_dests_sacked,
tp1->rec.data.TSN_seq,
tp1->sent,
SCTP_FR_LOG_STRIKE_CHUNK);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
tp1->sent++;
}
}
}
if (tp1->sent == SCTP_DATAGRAM_RESEND) {
struct sctp_nets *alt;
Move the flight size reduction to right after we recognize its a retransmit, ahead of the PR-SCTP work. Without this fix, we end up NOT reducing flight size and causing an miscalculation when PR-SCTP is active and data is skipped. Obtained from: Michael Tuexen.
2009-04-14 07:50:29 +00:00
/* fix counts and things */
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FLIGHT_LOGGING_ENABLE) {
sctp_misc_ints(SCTP_FLIGHT_LOG_DOWN_RSND,
(tp1->whoTo ? (tp1->whoTo->flight_size) : 0),
tp1->book_size,
Improve compilation on windows 64-bit (for the userland stack). MFC after: 1 week
2016-03-27 10:04:25 +00:00
(uint32_t) (uintptr_t) tp1->whoTo,
Move the flight size reduction to right after we recognize its a retransmit, ahead of the PR-SCTP work. Without this fix, we end up NOT reducing flight size and causing an miscalculation when PR-SCTP is active and data is skipped. Obtained from: Michael Tuexen.
2009-04-14 07:50:29 +00:00
tp1->rec.data.TSN_seq);
}
if (tp1->whoTo) {
tp1->whoTo->net_ack++;
sctp_flight_size_decrease(tp1);
Improvements to CC modules: 1) Add four new points that allow you to get more information to cc algo's 2) Fix the case where user changes module on a existing TCB, in such a case, the initialization module needs to be called on all nets. 3) Move htcp_cc structure to a union that other modules can use. 4) Add 5th point for get/set socket options for cc_module specific options MFC after: 2 months
2011-02-26 15:23:46 +00:00
if (stcb->asoc.cc_functions.sctp_cwnd_update_tsn_acknowledged) {
(*stcb->asoc.cc_functions.sctp_cwnd_update_tsn_acknowledged) (tp1->whoTo,
tp1);
}
Move the flight size reduction to right after we recognize its a retransmit, ahead of the PR-SCTP work. Without this fix, we end up NOT reducing flight size and causing an miscalculation when PR-SCTP is active and data is skipped. Obtained from: Michael Tuexen.
2009-04-14 07:50:29 +00:00
}
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LOG_RWND_ENABLE) {
sctp_log_rwnd(SCTP_INCREASE_PEER_RWND,
asoc->peers_rwnd, tp1->send_size, SCTP_BASE_SYSCTL(sctp_peer_chunk_oh));
}
/* add back to the rwnd */
asoc->peers_rwnd += (tp1->send_size + SCTP_BASE_SYSCTL(sctp_peer_chunk_oh));
/* remove from the total flight */
sctp_total_flight_decrease(stcb, tp1);
Add support for the SCTP_PR_SUPPORTED socket option as specified in http://tools.ietf.org/html/draft-ietf-tsvwg-sctp-prpolicies Add also a sysctl controlling the default of the end-points. MFC after: 1 week
2014-08-02 21:36:40 +00:00
if ((stcb->asoc.prsctp_supported) &&
Undo my lastest fix since that wasn't one at all. MFC after: 3 days.
2010-04-25 15:04:57 +00:00
(PR_SCTP_RTX_ENABLED(tp1->flags))) {
/*
* Has it been retransmitted tv_sec times? -
* we store the retran count there.
*/
if (tp1->snd_count > tp1->rec.data.timetodrop.tv_sec) {
/* Yes, so drop it */
if (tp1->data != NULL) {
Provide in the SCTP_SEND_FAILED and SCTP_SEND_FAILED_EVENT notifications the correct ssf_error or ssfe_error as required by RFC 6458. MFC after: 3 days
2012-05-13 19:32:49 +00:00
(void)sctp_release_pr_sctp_chunk(stcb, tp1, 1,
Undo my lastest fix since that wasn't one at all. MFC after: 3 days.
2010-04-25 15:04:57 +00:00
SCTP_SO_NOT_LOCKED);
}
/* Make sure to flag we had a FR */
tp1->whoTo->net_ack++;
continue;
}
}
Use SCTP_PRINTF() instead of printf() in all SCTP sources. MFC after: 3 days
2012-05-04 09:27:00 +00:00
/*
* SCTP_PRINTF("OK, we are now ready to FR this
* guy\n");
*/
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FR_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_fr(tp1->rec.data.TSN_seq, tp1->snd_count,
0, SCTP_FR_MARKED);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (strike_flag) {
/* This is a subsequent FR */
SCTP_STAT_INCR(sctps_sendmultfastretrans);
}
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
sctp_ucount_incr(stcb->asoc.sent_queue_retran_cnt);
Improve plausibility check in sctp_handle_sack(). Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP). MFC after: 3 months.
2010-12-22 17:59:38 +00:00
if (asoc->sctp_cmt_on_off > 0) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* CMT: Using RTX_SSTHRESH policy for CMT.
* If CMT is being used, then pick dest with
* largest ssthresh for any retransmission.
*/
tp1->no_fr_allowed = 1;
alt = tp1->whoTo;
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* sa_ignore NO_NULL_CHK */
Fix the switching on/off of CMT using sysctl and socket option. Fix the switching on/off of PF and NR-SACKs using sysctl. Add minor improvement in handling malloc failures. Improve the address checks when sending. MFC after: 4 weeks
2010-08-28 17:59:51 +00:00
if (asoc->sctp_cmt_pf > 0) {
- Modular congestion control, with RFC2581 being the default. - CMT_PF states added (w/sysctl to turn the PF version on) - sctp_input.c had a missing incr of cookie case when the auth was bad. This meant a free was called without an increment to refcnt, added increment like rest of code. - There was a case, unlikely, when the scope of the destination changed (this is a TSNH case). In that case, it would not free the alloc'ed asoc (in sctp_input.c). - When listed addresses found a colliding cookie/Init, then the collided upon tcb was not unlocked in sctp_pcb.c - Add error checking on arguments of sctp_sendx(3) to prevent it from referencing a NULL pointer. - Fix an error return of sctp_sendx(3), it was returing ENOMEM not -1. - Get assoc id was changed to use the sanctified socket api method for getting a assoc id (PEER_ADDR_INFO instead of PEER_ADDR_PARAMS). - Fix it so a peeled off socket will get a proper error return if it trys to send to a different address then it is connected to. - Fix so that select_a_stream can avoid an endless loop that could hang a caller. - time_entered (state set time) was not being set in all cases to the time we went established. Approved by: re(ken smith)
2007-07-14 09:36:28 +00:00
/*
* JRS 5/18/07 - If CMT PF is on,
* use the PF version of
* find_alt_net()
*/
alt = sctp_find_alternate_net(stcb, alt, 2);
} else {
/*
* JRS 5/18/07 - If only CMT is on,
* use the CMT version of
* find_alt_net()
*/
- remove duplicate code from sctp_asconf.c - remove duplicate #include <sys/priv.h> that is not under #ifdef FreeBSD version to allow compile on 6.1 - static analysis changes per the cisco SA tool including: o some SA_IGNORE comments o some checks for NULL before unlock. o type corrections int -> size_t - Fix it so sctp_alloc_asoc takes a thread/proc argument. Without this we pass a NULL in to bind on implicit assoc setup and crash :-( Approved by: re@freebsd.org(Ken Smith)
2007-07-21 21:41:32 +00:00
/* sa_ignore NO_NULL_CHK */
- Modular congestion control, with RFC2581 being the default. - CMT_PF states added (w/sysctl to turn the PF version on) - sctp_input.c had a missing incr of cookie case when the auth was bad. This meant a free was called without an increment to refcnt, added increment like rest of code. - There was a case, unlikely, when the scope of the destination changed (this is a TSNH case). In that case, it would not free the alloc'ed asoc (in sctp_input.c). - When listed addresses found a colliding cookie/Init, then the collided upon tcb was not unlocked in sctp_pcb.c - Add error checking on arguments of sctp_sendx(3) to prevent it from referencing a NULL pointer. - Fix an error return of sctp_sendx(3), it was returing ENOMEM not -1. - Get assoc id was changed to use the sanctified socket api method for getting a assoc id (PEER_ADDR_INFO instead of PEER_ADDR_PARAMS). - Fix it so a peeled off socket will get a proper error return if it trys to send to a different address then it is connected to. - Fix so that select_a_stream can avoid an endless loop that could hang a caller. - time_entered (state set time) was not being set in all cases to the time we went established. Approved by: re(ken smith)
2007-07-14 09:36:28 +00:00
alt = sctp_find_alternate_net(stcb, alt, 1);
}
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
if (alt == NULL) {
alt = tp1->whoTo;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* CUCv2: If a different dest is picked for
* the retransmission, then new
* (rtx-)pseudo_cumack needs to be tracked
* for orig dest. Let CUCv2 track new (rtx-)
* pseudo-cumack always.
*/
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
if (tp1->whoTo) {
tp1->whoTo->find_pseudo_cumack = 1;
tp1->whoTo->find_rtx_pseudo_cumack = 1;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {/* CMT is OFF */
#ifdef SCTP_FR_TO_ALTERNATE
/* Can we find an alternate? */
alt = sctp_find_alternate_net(stcb, tp1->whoTo, 0);
#else
/*
* default behavior is to NOT retransmit
* FR's to an alternate. Armando Caro's
* paper details why.
*/
alt = tp1->whoTo;
#endif
}
tp1->rec.data.doing_fast_retransmit = 1;
tot_retrans++;
/* mark the sending seq for possible subsequent FR's */
/*
Use SCTP_PRINTF() instead of printf() in all SCTP sources. MFC after: 3 days
2012-05-04 09:27:00 +00:00
* SCTP_PRINTF("Marking TSN for FR new value %x\n",
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* (uint32_t)tpi->rec.data.TSN_seq);
*/
if (TAILQ_EMPTY(&asoc->send_queue)) {
/*
* If the queue of send is empty then its
* the next sequence number that will be
* assigned so we subtract one from this to
* get the one we last sent.
*/
tp1->rec.data.fast_retran_tsn = sending_seq;
} else {
/*
* If there are chunks on the send queue
* (unsent data that has made it from the
* stream queues but not out the door, we
* take the first one (which will have the
* lowest TSN) and subtract one to get the
* one we last sent.
*/
struct sctp_tmit_chunk *ttt;
ttt = TAILQ_FIRST(&asoc->send_queue);
tp1->rec.data.fast_retran_tsn =
ttt->rec.data.TSN_seq;
}
if (tp1->do_rtt) {
/*
* this guy had a RTO calculation pending on
* it, cancel it
*/
Address issues found by clang. While there, fix also some style issues. MFC after: 3 months.
2011-12-27 10:16:24 +00:00
if ((tp1->whoTo != NULL) &&
(tp1->whoTo->rto_needed == 0)) {
Tunes and fixes the new DC-CC to seem to hit the right mix. Still may need some tweaks but it appears to almost not give away too much to an RFC2581 flow, but can really minimize the amount of buffers used in the net. MFC after: 3 months
2011-03-08 11:58:25 +00:00
tp1->whoTo->rto_needed = 1;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
tp1->do_rtt = 0;
}
if (alt != tp1->whoTo) {
/* yes, there is an alternate. */
sctp_free_remote_addr(tp1->whoTo);
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* sa_ignore FREED_MEMORY */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
tp1->whoTo = alt;
atomic_add_int(&alt->ref_count, 1);
}
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
struct sctp_tmit_chunk *
sctp_try_advance_peer_ack_point(struct sctp_tcb *stcb,
struct sctp_association *asoc)
{
struct sctp_tmit_chunk *tp1, *tp2, *a_adv = NULL;
struct timeval now;
int now_filled = 0;
Add support for the SCTP_PR_SUPPORTED socket option as specified in http://tools.ietf.org/html/draft-ietf-tsvwg-sctp-prpolicies Add also a sysctl controlling the default of the end-points. MFC after: 1 week
2014-08-02 21:36:40 +00:00
if (asoc->prsctp_supported == 0) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (NULL);
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(tp1, &asoc->sent_queue, sctp_next, tp2) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (tp1->sent != SCTP_FORWARD_TSN_SKIP &&
Improve PR-SCTP if used in combination with NR-SACK. Based on work done by Mohammad Rajiullah. MFC after: 1 week
2012-11-07 20:59:00 +00:00
tp1->sent != SCTP_DATAGRAM_RESEND &&
Get the accounting working. We now have counters how many chunks for each SCTP outgoing stream are in the send and sent queue. While there, improve the naming of NR-SACK related constants recently introduced. MFC after: 1 week
2012-11-16 19:39:10 +00:00
tp1->sent != SCTP_DATAGRAM_NR_ACKED) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* no chance to advance, out of here */
break;
}
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LOG_TRY_ADVANCE) {
Add some missing changes missed in the last commit. MFC after: 1 week X-MFC with: 242708
2012-11-07 21:25:32 +00:00
if ((tp1->sent == SCTP_FORWARD_TSN_SKIP) ||
Get the accounting working. We now have counters how many chunks for each SCTP outgoing stream are in the send and sent queue. While there, improve the naming of NR-SACK related constants recently introduced. MFC after: 1 week
2012-11-16 19:39:10 +00:00
(tp1->sent == SCTP_DATAGRAM_NR_ACKED)) {
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
sctp_misc_ints(SCTP_FWD_TSN_CHECK,
asoc->advanced_peer_ack_point,
tp1->rec.data.TSN_seq, 0, 0);
}
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (!PR_SCTP_ENABLED(tp1->flags)) {
/*
* We can't fwd-tsn past any that are reliable aka
* retransmitted until the asoc fails.
*/
break;
}
if (!now_filled) {
- Static analyisis fixes for cisco's commit (this is equivilant to the coverity tool.. may even be the same one.. not sure). - A bug in the way sctp_abort() and friends were setting the IP_CLOSE flag.. and NOT passing the last argument as a (,1)... so that things would get freed..
2007-05-08 14:32:53 +00:00
(void)SCTP_GETTIME_TIMEVAL(&now);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
now_filled = 1;
}
/*
* now we got a chunk which is marked for another
* retransmission to a PR-stream but has run out its chances
* already maybe OR has been marked to skip now. Can we skip
* it if its a resend?
*/
if (tp1->sent == SCTP_DATAGRAM_RESEND &&
(PR_SCTP_TTL_ENABLED(tp1->flags))) {
/*
* Now is this one marked for resend and its time is
* now up?
*/
if (timevalcmp(&now, &tp1->rec.data.timetodrop, >)) {
/* Yes so drop it */
if (tp1->data) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
(void)sctp_release_pr_sctp_chunk(stcb, tp1,
Provide in the SCTP_SEND_FAILED and SCTP_SEND_FAILED_EVENT notifications the correct ssf_error or ssfe_error as required by RFC 6458. MFC after: 3 days
2012-05-13 19:32:49 +00:00
1, SCTP_SO_NOT_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
} else {
/*
* No, we are done when hit one for resend
* whos time as not expired.
*/
break;
}
}
/*
* Ok now if this chunk is marked to drop it we can clean up
* the chunk, advance our peer ack point and we can check
* the next chunk.
*/
Improve PR-SCTP if used in combination with NR-SACK. Based on work done by Mohammad Rajiullah. MFC after: 1 week
2012-11-07 20:59:00 +00:00
if ((tp1->sent == SCTP_FORWARD_TSN_SKIP) ||
Get the accounting working. We now have counters how many chunks for each SCTP outgoing stream are in the send and sent queue. While there, improve the naming of NR-SACK related constants recently introduced. MFC after: 1 week
2012-11-16 19:39:10 +00:00
(tp1->sent == SCTP_DATAGRAM_NR_ACKED)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* advance PeerAckPoint goes forward */
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tp1->rec.data.TSN_seq, asoc->advanced_peer_ack_point)) {
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
asoc->advanced_peer_ack_point = tp1->rec.data.TSN_seq;
a_adv = tp1;
} else if (tp1->rec.data.TSN_seq == asoc->advanced_peer_ack_point) {
/* No update but we do save the chk */
a_adv = tp1;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
/*
* If it is still in RESEND we can advance no
* further
*/
break;
}
}
return (a_adv);
}
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
static int
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
sctp_fs_audit(struct sctp_association *asoc)
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
{
struct sctp_tmit_chunk *chk;
Undo a spell fix introduced in r298942, which breaks compilation.
2016-05-02 21:23:05 +00:00
int inflight = 0, resend = 0, inbetween = 0, acked = 0, above = 0;
Address some compiler warnings. No functional change. MFC after: 3 days
2015-05-28 14:24:21 +00:00
int ret;
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
Address some compiler warnings. No functional change. MFC after: 3 days
2015-05-28 14:24:21 +00:00
#ifndef INVARIANTS
int entry_flight, entry_cnt;
#endif
ret = 0;
#ifndef INVARIANTS
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
entry_flight = asoc->total_flight;
entry_cnt = asoc->total_flight_count;
Address some compiler warnings. No functional change. MFC after: 3 days
2015-05-28 14:24:21 +00:00
#endif
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
if (asoc->pr_sctp_cnt >= asoc->sent_queue_cnt)
return (0);
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
TAILQ_FOREACH(chk, &asoc->sent_queue, sctp_next) {
if (chk->sent < SCTP_DATAGRAM_RESEND) {
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTP_PRINTF("Chk TSN: %u size: %d inflight cnt: %d\n",
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
chk->rec.data.TSN_seq,
chk->send_size,
Use SCTP_PRINTF() instead of printf() in all SCTP sources. MFC after: 3 days
2012-05-04 09:27:00 +00:00
chk->snd_count);
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
inflight++;
} else if (chk->sent == SCTP_DATAGRAM_RESEND) {
resend++;
} else if (chk->sent < SCTP_DATAGRAM_ACKED) {
inbetween++;
} else if (chk->sent > SCTP_DATAGRAM_ACKED) {
above++;
} else {
acked++;
}
}
- More work on making send lock contention. - Removed free-oqueue cache. - Fix counter for sq entries - Increased the amount of information retained on ASOC_TSN logging on the association. - Made it so with the ASOC_TSN logging on sending or recieving an abort we dump the log. - Went through and added invariant's around some panic's that needed them. - decrements went to atomic_subtact_int instead of add -1 - Removed residual count increment that threw off a strm oq count. - Tracks and complaints if we don't have a LAST fragment and clean up the sp structure. - Track a new stat that counts number of abandoned msgs that happen if you close without reading. - Fix lookup of frag point to be aware of a 0 assoc-id. Reviewed by: gnn
2007-04-19 11:28:43 +00:00
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
if ((inflight > 0) || (inbetween > 0)) {
- More work on making send lock contention. - Removed free-oqueue cache. - Fix counter for sq entries - Increased the amount of information retained on ASOC_TSN logging on the association. - Made it so with the ASOC_TSN logging on sending or recieving an abort we dump the log. - Went through and added invariant's around some panic's that needed them. - decrements went to atomic_subtact_int instead of add -1 - Removed residual count increment that threw off a strm oq count. - Tracks and complaints if we don't have a LAST fragment and clean up the sp structure. - Track a new stat that counts number of abandoned msgs that happen if you close without reading. - Fix lookup of frag point to be aware of a 0 assoc-id. Reviewed by: gnn
2007-04-19 11:28:43 +00:00
#ifdef INVARIANTS
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
panic("Flight size-express incorrect? \n");
- More work on making send lock contention. - Removed free-oqueue cache. - Fix counter for sq entries - Increased the amount of information retained on ASOC_TSN logging on the association. - Made it so with the ASOC_TSN logging on sending or recieving an abort we dump the log. - Went through and added invariant's around some panic's that needed them. - decrements went to atomic_subtact_int instead of add -1 - Removed residual count increment that threw off a strm oq count. - Tracks and complaints if we don't have a LAST fragment and clean up the sp structure. - Track a new stat that counts number of abandoned msgs that happen if you close without reading. - Fix lookup of frag point to be aware of a 0 assoc-id. Reviewed by: gnn
2007-04-19 11:28:43 +00:00
#else
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTP_PRINTF("asoc->total_flight: %d cnt: %d\n",
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
entry_flight, entry_cnt);
Cleanup debug output.
2016-04-18 06:58:07 +00:00
SCTP_PRINTF("Flight size-express incorrect F: %d I: %d R: %d Ab: %d ACK: %d\n",
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
inflight, inbetween, resend, above, acked);
ret = 1;
- More work on making send lock contention. - Removed free-oqueue cache. - Fix counter for sq entries - Increased the amount of information retained on ASOC_TSN logging on the association. - Made it so with the ASOC_TSN logging on sending or recieving an abort we dump the log. - Went through and added invariant's around some panic's that needed them. - decrements went to atomic_subtact_int instead of add -1 - Removed residual count increment that threw off a strm oq count. - Tracks and complaints if we don't have a LAST fragment and clean up the sp structure. - Track a new stat that counts number of abandoned msgs that happen if you close without reading. - Fix lookup of frag point to be aware of a 0 assoc-id. Reviewed by: gnn
2007-04-19 11:28:43 +00:00
#endif
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
}
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
return (ret);
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
}
static void
sctp_window_probe_recovery(struct sctp_tcb *stcb,
struct sctp_association *asoc,
struct sctp_tmit_chunk *tp1)
{
- PR-SCTP bug, where the CUM-ACK was not being updated into the advance_peer_ack point so we would incorrectly send a wrong value in the FWD-TSN - PR-SCTP bug, where an PR packet is used for a window probe which could incorrectly get the packet moved back into the send_queue, which will cause major issues and should not happen. - Fix a trace to use the proper macro.
2009-03-04 20:54:42 +00:00
tp1->window_probe = 0;
Fixes for window probes: 1) WP should never be marked unless flight size is 0 2) When recovering from wp if the peer ack's it we don't mark for retran 3) When recovering, we must assure a timer is still running.
2009-03-06 11:03:52 +00:00
if ((tp1->sent >= SCTP_DATAGRAM_ACKED) || (tp1->data == NULL)) {
- PR-SCTP bug, where the CUM-ACK was not being updated into the advance_peer_ack point so we would incorrectly send a wrong value in the FWD-TSN - PR-SCTP bug, where an PR packet is used for a window probe which could incorrectly get the packet moved back into the send_queue, which will cause major issues and should not happen. - Fix a trace to use the proper macro.
2009-03-04 20:54:42 +00:00
/* TSN's skipped we do NOT move back. */
sctp_misc_ints(SCTP_FLIGHT_LOG_DWN_WP_FWD,
Fix the bug in the handling of fragmented abandoned SCTP user messages reported in https://code.google.com/p/sctp-refimpl/issues/detail?id=11 Thanks to Lally Singh for reporting it. MFC after: 3 days
2015-03-24 15:05:36 +00:00
tp1->whoTo ? tp1->whoTo->flight_size : 0,
- PR-SCTP bug, where the CUM-ACK was not being updated into the advance_peer_ack point so we would incorrectly send a wrong value in the FWD-TSN - PR-SCTP bug, where an PR packet is used for a window probe which could incorrectly get the packet moved back into the send_queue, which will cause major issues and should not happen. - Fix a trace to use the proper macro.
2009-03-04 20:54:42 +00:00
tp1->book_size,
Improve compilation on windows 64-bit (for the userland stack). MFC after: 1 week
2016-03-27 10:04:25 +00:00
(uint32_t) (uintptr_t) tp1->whoTo,
- PR-SCTP bug, where the CUM-ACK was not being updated into the advance_peer_ack point so we would incorrectly send a wrong value in the FWD-TSN - PR-SCTP bug, where an PR packet is used for a window probe which could incorrectly get the packet moved back into the send_queue, which will cause major issues and should not happen. - Fix a trace to use the proper macro.
2009-03-04 20:54:42 +00:00
tp1->rec.data.TSN_seq);
return;
}
Fixes for window probes: 1) WP should never be marked unless flight size is 0 2) When recovering from wp if the peer ack's it we don't mark for retran 3) When recovering, we must assure a timer is still running.
2009-03-06 11:03:52 +00:00
/* First setup this by shrinking flight */
Improvements to CC modules: 1) Add four new points that allow you to get more information to cc algo's 2) Fix the case where user changes module on a existing TCB, in such a case, the initialization module needs to be called on all nets. 3) Move htcp_cc structure to a union that other modules can use. 4) Add 5th point for get/set socket options for cc_module specific options MFC after: 2 months
2011-02-26 15:23:46 +00:00
if (stcb->asoc.cc_functions.sctp_cwnd_update_tsn_acknowledged) {
(*stcb->asoc.cc_functions.sctp_cwnd_update_tsn_acknowledged) (tp1->whoTo,
tp1);
}
Fixes for window probes: 1) WP should never be marked unless flight size is 0 2) When recovering from wp if the peer ack's it we don't mark for retran 3) When recovering, we must assure a timer is still running.
2009-03-06 11:03:52 +00:00
sctp_flight_size_decrease(tp1);
sctp_total_flight_decrease(stcb, tp1);
/* Now mark for resend */
tp1->sent = SCTP_DATAGRAM_RESEND;
Use the proper increment macro when increasing the number on sent_queue_retran_cnt. MFC after: 1 week
2010-06-05 21:22:58 +00:00
sctp_ucount_incr(asoc->sent_queue_retran_cnt);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FLIGHT_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_misc_ints(SCTP_FLIGHT_LOG_DOWN_WP,
tp1->whoTo->flight_size,
tp1->book_size,
Improve compilation on windows 64-bit (for the userland stack). MFC after: 1 week
2016-03-27 10:04:25 +00:00
(uint32_t) (uintptr_t) tp1->whoTo,
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
tp1->rec.data.TSN_seq);
}
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
void
sctp_express_handle_sack(struct sctp_tcb *stcb, uint32_t cumack,
1) Allow a chunk to track the cwnd it was at when sent. 2) Add separate max-bursts for retransmit and hb. These are set to sysctlable values but not settable via the socket api. This makes sure we don't blast out HB's or fast-retransmits. 3) Determine on the first data transmission on a net if its local-lan (by being under or over a RTT). This can later be used to think about different algorithms based on locallan vs big-i (experimental) 4) The cwnd should NOT be allowed to grow when an ECNEcho is seen (TCP has this same bug). We fix this in SCTP so an ECNe being seen prevents an advance of cwnd. 5) CWR's should not be sent multiple times to the same network, instead just updating the TSN being transmitted if needed. MFC after: 1 Month
2011-02-02 11:13:23 +00:00
uint32_t rwnd, int *abort_now, int ecne_seen)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_nets *net;
struct sctp_association *asoc;
struct sctp_tmit_chunk *tp1, *tp2;
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
uint32_t old_rwnd;
int win_probe_recovery = 0;
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
int win_probe_recovered = 0;
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
int j, done_once = 0;
Tunes and fixes the new DC-CC to seem to hit the right mix. Still may need some tweaks but it appears to almost not give away too much to an RFC2581 flow, but can really minimize the amount of buffers used in the net. MFC after: 3 months
2011-03-08 11:58:25 +00:00
int rto_ok = 1;
Retire net.inet.sctp.strict_sacks and net.inet.sctp.strict_data_order sysctl's, since they where only there to interop with non-conformant implementations. This should not be a problem anymore.
2016-05-12 16:34:59 +00:00
uint32_t send_s;
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LOG_SACK_ARRIVALS_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_misc_ints(SCTP_SACK_LOG_EXPRESS, cumack,
rwnd, stcb->asoc.last_acked_seq, stcb->asoc.peers_rwnd);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_TCB_LOCK_ASSERT(stcb);
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
#ifdef SCTP_ASOCLOG_OF_TSNS
stcb->asoc.cumack_log[stcb->asoc.cumack_log_at] = cumack;
stcb->asoc.cumack_log_at++;
if (stcb->asoc.cumack_log_at > SCTP_TSN_LOG_SIZE) {
stcb->asoc.cumack_log_at = 0;
}
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc = &stcb->asoc;
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
old_rwnd = asoc->peers_rwnd;
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(asoc->last_acked_seq, cumack)) {
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
/* old ack */
return;
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
} else if (asoc->last_acked_seq == cumack) {
/* Window update sack */
asoc->peers_rwnd = sctp_sbspace_sub(rwnd,
PR SCTP Bugs. Basically a full sized frame of PR SCTP FWD-TSN's would not be sent and thus cause a stalled connection. Also the rwnd Calculation was also off on the receiver side for PR-SCTP. MFC after: 1 month
2010-07-29 11:37:04 +00:00
(uint32_t) (asoc->total_flight + (asoc->total_flight_count * SCTP_BASE_SYSCTL(sctp_peer_chunk_oh))));
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
if (asoc->peers_rwnd < stcb->sctp_ep->sctp_ep.sctp_sws_sender) {
/* SWS sender side engages */
asoc->peers_rwnd = 0;
}
if (asoc->peers_rwnd > old_rwnd) {
goto again;
}
return;
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* First setup for CC stuff */
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
Fixes to ECN in SCTP. 1) ECN was on an association basis, this is incorrect and will not work with CMT or for that matter if the user is sending to multiple addresses. This commit makes ECN on a per path basis. 2) Adopt the new format for the ECN internet draft. This also maintains compatability with old format chunks as well. 3) Keep track of the real time of a RTT down to micro seconds. For some future conditional features (for like a data center this is good information to have). MFC after: 1 month
2011-01-29 19:55:29 +00:00
if (SCTP_TSN_GT(cumack, net->cwr_window_tsn)) {
/* Drag along the window_tsn for cwr's */
net->cwr_window_tsn = cumack;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
net->prev_cwnd = net->cwnd;
net->net_ack = 0;
net->net_ack2 = 0;
- errno -> becomes error in sctp_output.c and sctputil.c - SB_CLEAR macro defined and used for sb clearing. - Fix for CMT express_sack_handling did not do proper pseudo-cumack updates. - Get rid of extraneous function that was never used ip_2_ip6_hdr() - Fixed source address selection bug (initialization problem). - Source address selection debug added.
2007-03-19 06:53:02 +00:00
/*
* CMT: Reset CUC and Fast recovery algo variables before
* SACK processing
*/
net->new_pseudo_cumack = 0;
net->will_exit_fast_recovery = 0;
Improvements to CC modules: 1) Add four new points that allow you to get more information to cc algo's 2) Fix the case where user changes module on a existing TCB, in such a case, the initialization module needs to be called on all nets. 3) Move htcp_cc structure to a union that other modules can use. 4) Add 5th point for get/set socket options for cc_module specific options MFC after: 2 months
2011-02-26 15:23:46 +00:00
if (stcb->asoc.cc_functions.sctp_cwnd_prepare_net_for_sack) {
(*stcb->asoc.cc_functions.sctp_cwnd_prepare_net_for_sack) (stcb, net);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Retire net.inet.sctp.strict_sacks and net.inet.sctp.strict_data_order sysctl's, since they where only there to interop with non-conformant implementations. This should not be a problem anymore.
2016-05-12 16:34:59 +00:00
if (!TAILQ_EMPTY(&asoc->sent_queue)) {
tp1 = TAILQ_LAST(&asoc->sent_queue,
sctpchunk_listhead);
send_s = tp1->rec.data.TSN_seq + 1;
} else {
send_s = asoc->sending_seq;
}
if (SCTP_TSN_GE(cumack, send_s)) {
struct mbuf *op_err;
char msg[SCTP_DIAG_INFO_LEN];
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
Retire net.inet.sctp.strict_sacks and net.inet.sctp.strict_data_order sysctl's, since they where only there to interop with non-conformant implementations. This should not be a problem anymore.
2016-05-12 16:34:59 +00:00
*abort_now = 1;
/* XXX */
snprintf(msg, sizeof(msg), "Cum ack %8.8x greater or equal than TSN %8.8x",
cumack, send_s);
op_err = sctp_generate_cause(SCTP_CAUSE_PROTOCOL_VIOLATION, msg);
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_21;
sctp_abort_an_association(stcb->sctp_ep, stcb, op_err, SCTP_SO_NOT_LOCKED);
return;
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->this_sack_highest_gap = cumack;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_THRESHOLD_LOGGING) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
sctp_misc_ints(SCTP_THRESHOLD_CLEAR,
stcb->asoc.overall_error_count,
0,
SCTP_FROM_SCTP_INDATA,
__LINE__);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
stcb->asoc.overall_error_count = 0;
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(cumack, asoc->last_acked_seq)) {
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
/* process the new consecutive TSN first */
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH_SAFE(tp1, &asoc->sent_queue, sctp_next, tp2) {
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GE(cumack, tp1->rec.data.TSN_seq)) {
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
if (tp1->sent == SCTP_DATAGRAM_UNSENT) {
Use SCTP_PRINTF() instead of printf() in all SCTP sources. MFC after: 3 days
2012-05-04 09:27:00 +00:00
SCTP_PRINTF("Warning, an unsent is now acked?\n");
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
}
if (tp1->sent < SCTP_DATAGRAM_ACKED) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
* If it is less than ACKED, it is
* now no-longer in flight. Higher
* values may occur during marking
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
if (tp1->sent < SCTP_DATAGRAM_RESEND) {
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FLIGHT_LOGGING_ENABLE) {
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
sctp_misc_ints(SCTP_FLIGHT_LOG_DOWN_CA,
tp1->whoTo->flight_size,
tp1->book_size,
Improve compilation on windows 64-bit (for the userland stack). MFC after: 1 week
2016-03-27 10:04:25 +00:00
(uint32_t) (uintptr_t) tp1->whoTo,
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
tp1->rec.data.TSN_seq);
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
}
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
sctp_flight_size_decrease(tp1);
Improvements to CC modules: 1) Add four new points that allow you to get more information to cc algo's 2) Fix the case where user changes module on a existing TCB, in such a case, the initialization module needs to be called on all nets. 3) Move htcp_cc structure to a union that other modules can use. 4) Add 5th point for get/set socket options for cc_module specific options MFC after: 2 months
2011-02-26 15:23:46 +00:00
if (stcb->asoc.cc_functions.sctp_cwnd_update_tsn_acknowledged) {
(*stcb->asoc.cc_functions.sctp_cwnd_update_tsn_acknowledged) (tp1->whoTo,
tp1);
}
- Incorrect error EAGAIN returned for invalid send on a locked stream (using EEOR mode). Changed to EINVAL (in sctp_output.c) - Static analysis comments added - fix in mobility code to return a value (static analysis found). - sctp6_notify function made visible instead of static (this is needed for Panda). Approved by: re@freebsd.org (B Mah)
2007-09-13 10:36:43 +00:00
/* sa_ignore NO_NULL_CHK */
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
sctp_total_flight_decrease(stcb, tp1);
}
tp1->whoTo->net_ack += tp1->send_size;
if (tp1->snd_count < 2) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
* True non-retransmited
* chunk
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
tp1->whoTo->net_ack2 +=
tp1->send_size;
- errno -> becomes error in sctp_output.c and sctputil.c - SB_CLEAR macro defined and used for sb clearing. - Fix for CMT express_sack_handling did not do proper pseudo-cumack updates. - Get rid of extraneous function that was never used ip_2_ip6_hdr() - Fixed source address selection bug (initialization problem). - Source address selection debug added.
2007-03-19 06:53:02 +00:00
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
/* update RTO too? */
if (tp1->do_rtt) {
Tunes and fixes the new DC-CC to seem to hit the right mix. Still may need some tweaks but it appears to almost not give away too much to an RFC2581 flow, but can really minimize the amount of buffers used in the net. MFC after: 3 months
2011-03-08 11:58:25 +00:00
if (rto_ok) {
tp1->whoTo->RTO =
/*
* sa_ignore
* NO_NULL_CH
* K
*/
sctp_calculate_rto(stcb,
asoc, tp1->whoTo,
&tp1->sent_rcv_time,
sctp_align_safe_nocopy,
SCTP_RTT_FROM_DATA);
rto_ok = 0;
}
if (tp1->whoTo->rto_needed == 0) {
tp1->whoTo->rto_needed = 1;
}
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
tp1->do_rtt = 0;
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
}
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
}
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
/*
* CMT: CUCv2 algorithm. From the
* cumack'd TSNs, for each TSN being
* acked for the first time, set the
* following variables for the
* corresp destination.
* new_pseudo_cumack will trigger a
* cwnd update.
* find_(rtx_)pseudo_cumack will
* trigger search for the next
* expected (rtx-)pseudo-cumack.
*/
tp1->whoTo->new_pseudo_cumack = 1;
tp1->whoTo->find_pseudo_cumack = 1;
tp1->whoTo->find_rtx_pseudo_cumack = 1;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_CWND_LOGGING_ENABLE) {
- Incorrect error EAGAIN returned for invalid send on a locked stream (using EEOR mode). Changed to EINVAL (in sctp_output.c) - Static analysis comments added - fix in mobility code to return a value (static analysis found). - sctp6_notify function made visible instead of static (this is needed for Panda). Approved by: re@freebsd.org (B Mah)
2007-09-13 10:36:43 +00:00
/* sa_ignore NO_NULL_CHK */
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
sctp_log_cwnd(stcb, tp1->whoTo, tp1->rec.data.TSN_seq, SCTP_CWND_LOG_FROM_SACK);
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
if (tp1->sent == SCTP_DATAGRAM_RESEND) {
sctp_ucount_decr(asoc->sent_queue_retran_cnt);
}
if (tp1->rec.data.chunk_was_revoked) {
/* deflate the cwnd */
tp1->whoTo->cwnd -= tp1->book_size;
tp1->rec.data.chunk_was_revoked = 0;
}
Get the accounting working. We now have counters how many chunks for each SCTP outgoing stream are in the send and sent queue. While there, improve the naming of NR-SACK related constants recently introduced. MFC after: 1 week
2012-11-16 19:39:10 +00:00
if (tp1->sent != SCTP_DATAGRAM_NR_ACKED) {
Add per outgoing stream accounting for chunks in the send and sent queue. This provides no functional change, but is a preparation for an upcoming stream reset improvement. Done with rrs@. MFC after: 1 week
2012-11-07 22:11:38 +00:00
if (asoc->strmout[tp1->rec.data.stream_number].chunks_on_queues > 0) {
asoc->strmout[tp1->rec.data.stream_number].chunks_on_queues--;
#ifdef INVARIANTS
} else {
panic("No chunks on the queues for sid %u.", tp1->rec.data.stream_number);
#endif
}
}
Ensure that outgoing streams get reset when they run dry. MFC after: 1 week
2015-12-03 15:19:29 +00:00
if ((asoc->strmout[tp1->rec.data.stream_number].chunks_on_queues == 0) &&
(asoc->strmout[tp1->rec.data.stream_number].state == SCTP_STREAM_RESET_PENDING) &&
TAILQ_EMPTY(&asoc->strmout[tp1->rec.data.stream_number].outqueue)) {
asoc->trigger_reset = 1;
}
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
TAILQ_REMOVE(&asoc->sent_queue, tp1, sctp_next);
if (tp1->data) {
- Incorrect error EAGAIN returned for invalid send on a locked stream (using EEOR mode). Changed to EINVAL (in sctp_output.c) - Static analysis comments added - fix in mobility code to return a value (static analysis found). - sctp6_notify function made visible instead of static (this is needed for Panda). Approved by: re@freebsd.org (B Mah)
2007-09-13 10:36:43 +00:00
/* sa_ignore NO_NULL_CHK */
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
sctp_free_bufspace(stcb, asoc, tp1, 1);
sctp_m_freem(tp1->data);
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
tp1->data = NULL;
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_SACK_LOGGING_ENABLE) {
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
sctp_log_sack(asoc->last_acked_seq,
cumack,
tp1->rec.data.TSN_seq,
0,
0,
SCTP_LOG_FREE_SENT);
}
asoc->sent_queue_cnt--;
Fix a locking issue showing up on Mac OS X when subscribing to authentication events. DTLS/SCTP renegotiations trigger the bug. MFC after: 2 weeks.
2011-05-08 09:11:59 +00:00
sctp_free_a_chunk(stcb, tp1, SCTP_SO_NOT_LOCKED);
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
} else {
break;
}
}
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Incorrect error EAGAIN returned for invalid send on a locked stream (using EEOR mode). Changed to EINVAL (in sctp_output.c) - Static analysis comments added - fix in mobility code to return a value (static analysis found). - sctp6_notify function made visible instead of static (this is needed for Panda). Approved by: re@freebsd.org (B Mah)
2007-09-13 10:36:43 +00:00
/* sa_ignore NO_NULL_CHK */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (stcb->sctp_socket) {
Whitespace cleanup. MFC after: 3 days
2012-06-25 17:15:09 +00:00
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
struct socket *so;
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SOCKBUF_LOCK(&stcb->sctp_socket->so_snd);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_WAKE_LOGGING_ENABLE) {
- Incorrect error EAGAIN returned for invalid send on a locked stream (using EEOR mode). Changed to EINVAL (in sctp_output.c) - Static analysis comments added - fix in mobility code to return a value (static analysis found). - sctp6_notify function made visible instead of static (this is needed for Panda). Approved by: re@freebsd.org (B Mah)
2007-09-13 10:36:43 +00:00
/* sa_ignore NO_NULL_CHK */
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_wakeup_log(stcb, 1, SCTP_WAKESND_FROM_SACK);
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
}
Whitespace cleanup. MFC after: 3 days
2012-06-25 17:15:09 +00:00
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
so = SCTP_INP_SO(stcb->sctp_ep);
atomic_add_int(&stcb->asoc.refcnt, 1);
SCTP_TCB_UNLOCK(stcb);
SCTP_SOCKET_LOCK(so, 1);
SCTP_TCB_LOCK(stcb);
atomic_subtract_int(&stcb->asoc.refcnt, 1);
if (stcb->asoc.state & SCTP_STATE_CLOSED_SOCKET) {
/* assoc was freed while we were unlocked */
SCTP_SOCKET_UNLOCK(so, 1);
return;
}
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_sowwakeup_locked(stcb->sctp_ep, stcb->sctp_socket);
Whitespace cleanup. MFC after: 3 days
2012-06-25 17:15:09 +00:00
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
SCTP_SOCKET_UNLOCK(so, 1);
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_WAKE_LOGGING_ENABLE) {
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_wakeup_log(stcb, 1, SCTP_NOWAKE_FROM_SACK);
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Modular congestion control, with RFC2581 being the default. - CMT_PF states added (w/sysctl to turn the PF version on) - sctp_input.c had a missing incr of cookie case when the auth was bad. This meant a free was called without an increment to refcnt, added increment like rest of code. - There was a case, unlikely, when the scope of the destination changed (this is a TSNH case). In that case, it would not free the alloc'ed asoc (in sctp_input.c). - When listed addresses found a colliding cookie/Init, then the collided upon tcb was not unlocked in sctp_pcb.c - Add error checking on arguments of sctp_sendx(3) to prevent it from referencing a NULL pointer. - Fix an error return of sctp_sendx(3), it was returing ENOMEM not -1. - Get assoc id was changed to use the sanctified socket api method for getting a assoc id (PEER_ADDR_INFO instead of PEER_ADDR_PARAMS). - Fix it so a peeled off socket will get a proper error return if it trys to send to a different address then it is connected to. - Fix so that select_a_stream can avoid an endless loop that could hang a caller. - time_entered (state set time) was not being set in all cases to the time we went established. Approved by: re(ken smith)
2007-07-14 09:36:28 +00:00
/* JRS - Use the congestion control given in the CC module */
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if ((asoc->last_acked_seq != cumack) && (ecne_seen == 0)) {
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
if (net->net_ack2 > 0) {
/*
* Karn's rule applies to clearing error
* count, this is optional.
*/
net->error_count = 0;
if (!(net->dest_state & SCTP_ADDR_REACHABLE)) {
/* addr came good */
net->dest_state |= SCTP_ADDR_REACHABLE;
sctp_ulp_notify(SCTP_NOTIFY_INTERFACE_UP, stcb,
Provide the error code in SCTP_PEER_ADDR_CHANGE notifications as specified in RFC 6458. MFC after: 3 days
2012-05-13 17:36:04 +00:00
0, (void *)net, SCTP_SO_NOT_LOCKED);
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
}
if (net == stcb->asoc.primary_destination) {
if (stcb->asoc.alternate) {
/*
* release the alternate,
* primary is good
*/
sctp_free_remote_addr(stcb->asoc.alternate);
stcb->asoc.alternate = NULL;
}
}
if (net->dest_state & SCTP_ADDR_PF) {
net->dest_state &= ~SCTP_ADDR_PF;
Fix and cleanup the debug information. This has no user-visible changes. Thanks to Irene Ruengeler for proving a patch. MFC after: 3 days
2015-05-28 16:00:23 +00:00
sctp_timer_stop(SCTP_TIMER_TYPE_HEARTBEAT,
stcb->sctp_ep, stcb, net,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
SCTP_FROM_SCTP_INDATA + SCTP_LOC_22);
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_HEARTBEAT, stcb->sctp_ep, stcb, net);
asoc->cc_functions.sctp_cwnd_update_exit_pf(stcb, net);
/* Done with this net */
net->net_ack = 0;
}
/* restore any doubled timers */
net->RTO = (net->lastsa >> SCTP_RTT_SHIFT) + net->lastsv;
if (net->RTO < stcb->asoc.minrto) {
net->RTO = stcb->asoc.minrto;
}
if (net->RTO > stcb->asoc.maxrto) {
net->RTO = stcb->asoc.maxrto;
}
}
}
- Modular congestion control, with RFC2581 being the default. - CMT_PF states added (w/sysctl to turn the PF version on) - sctp_input.c had a missing incr of cookie case when the auth was bad. This meant a free was called without an increment to refcnt, added increment like rest of code. - There was a case, unlikely, when the scope of the destination changed (this is a TSNH case). In that case, it would not free the alloc'ed asoc (in sctp_input.c). - When listed addresses found a colliding cookie/Init, then the collided upon tcb was not unlocked in sctp_pcb.c - Add error checking on arguments of sctp_sendx(3) to prevent it from referencing a NULL pointer. - Fix an error return of sctp_sendx(3), it was returing ENOMEM not -1. - Get assoc id was changed to use the sanctified socket api method for getting a assoc id (PEER_ADDR_INFO instead of PEER_ADDR_PARAMS). - Fix it so a peeled off socket will get a proper error return if it trys to send to a different address then it is connected to. - Fix so that select_a_stream can avoid an endless loop that could hang a caller. - time_entered (state set time) was not being set in all cases to the time we went established. Approved by: re(ken smith)
2007-07-14 09:36:28 +00:00
asoc->cc_functions.sctp_cwnd_update_after_sack(stcb, asoc, 1, 0, 0);
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->last_acked_seq = cumack;
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (TAILQ_EMPTY(&asoc->sent_queue)) {
/* nothing left in-flight */
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
net->flight_size = 0;
net->partial_bytes_acked = 0;
}
asoc->total_flight = 0;
asoc->total_flight_count = 0;
}
/* RWND update */
asoc->peers_rwnd = sctp_sbspace_sub(rwnd,
PR SCTP Bugs. Basically a full sized frame of PR SCTP FWD-TSN's would not be sent and thus cause a stalled connection. Also the rwnd Calculation was also off on the receiver side for PR-SCTP. MFC after: 1 month
2010-07-29 11:37:04 +00:00
(uint32_t) (asoc->total_flight + (asoc->total_flight_count * SCTP_BASE_SYSCTL(sctp_peer_chunk_oh))));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (asoc->peers_rwnd < stcb->sctp_ep->sctp_ep.sctp_sws_sender) {
/* SWS sender side engages */
asoc->peers_rwnd = 0;
}
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
if (asoc->peers_rwnd > old_rwnd) {
win_probe_recovery = 1;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Now assure a timer where data is queued at */
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
again:
j = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
Fixes for window probes: 1) WP should never be marked unless flight size is 0 2) When recovering from wp if the peer ack's it we don't mark for retran 3) When recovering, we must assure a timer is still running.
2009-03-06 11:03:52 +00:00
int to_ticks;
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
if (win_probe_recovery && (net->window_probe)) {
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
win_probe_recovered = 1;
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
/*
* Find first chunk that was used with window probe
* and clear the sent
*/
- Fixed 1-2-1 model to not worry about associd in sockopts - Fixed RTOinfo for bounding. - Fixed connect() to return ECONNREFUSED when an ABORT is received. - Added comments to direct Static Analysis not to look at some things it does not understand (comments are /* sa_ignore XXXXX */) - Bind when colliding was broken, missing not_found = 1 before checking to see if the port was in use caused endless bind loop. - Cookie life needs to be in milliseconds to conform to socket api. - Cookie life is not supposed to change if its 0, On the assoc level set we changed it to 0 opps. - Two more static analysis issues identified by the cisco tool. Null checks needed. - An issue for sendfile(). Need to validate the correct input argument. - When sending failed due to a no route to host, we leaked the mbuf chain failing to call m_freem(). - Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined Reviewed by: gnn
2007-05-17 12:16:24 +00:00
/* sa_ignore FREED_MEMORY */
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
TAILQ_FOREACH(tp1, &asoc->sent_queue, sctp_next) {
if (tp1->window_probe) {
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
/* move back to data send queue */
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_window_probe_recovery(stcb, asoc, tp1);
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
break;
}
}
}
Fixes for window probes: 1) WP should never be marked unless flight size is 0 2) When recovering from wp if the peer ack's it we don't mark for retran 3) When recovering, we must assure a timer is still running.
2009-03-06 11:03:52 +00:00
if (net->RTO == 0) {
to_ticks = MSEC_TO_TICKS(stcb->asoc.initial_rto);
} else {
to_ticks = MSEC_TO_TICKS(net->RTO);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (net->flight_size) {
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
j++;
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
(void)SCTP_OS_TIMER_START(&net->rxt_timer.timer, to_ticks,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_timeout_handler, &net->rxt_timer);
Fixes for window probes: 1) WP should never be marked unless flight size is 0 2) When recovering from wp if the peer ack's it we don't mark for retran 3) When recovering, we must assure a timer is still running.
2009-03-06 11:03:52 +00:00
if (net->window_probe) {
net->window_probe = 0;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
Fixes for window probes: 1) WP should never be marked unless flight size is 0 2) When recovering from wp if the peer ack's it we don't mark for retran 3) When recovering, we must assure a timer is still running.
2009-03-06 11:03:52 +00:00
if (net->window_probe) {
/*
* In window probes we must assure a timer
* is still running there
*/
net->window_probe = 0;
if (!SCTP_OS_TIMER_PENDING(&net->rxt_timer.timer)) {
SCTP_OS_TIMER_START(&net->rxt_timer.timer, to_ticks,
sctp_timeout_handler, &net->rxt_timer);
}
} else if (SCTP_OS_TIMER_PENDING(&net->rxt_timer.timer)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_timer_stop(SCTP_TIMER_TYPE_SEND, stcb->sctp_ep,
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
stcb, net,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
SCTP_FROM_SCTP_INDATA + SCTP_LOC_23);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
if ((j == 0) &&
(!TAILQ_EMPTY(&asoc->sent_queue)) &&
(asoc->sent_queue_retran_cnt == 0) &&
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
(win_probe_recovered == 0) &&
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
(done_once == 0)) {
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
/*
* huh, this should not happen unless all packets are
* PR-SCTP and marked to skip of course.
*/
if (sctp_fs_audit(asoc)) {
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
net->flight_size = 0;
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
}
asoc->total_flight = 0;
asoc->total_flight_count = 0;
asoc->sent_queue_retran_cnt = 0;
TAILQ_FOREACH(tp1, &asoc->sent_queue, sctp_next) {
if (tp1->sent < SCTP_DATAGRAM_RESEND) {
sctp_flight_size_increase(tp1);
sctp_total_flight_increase(stcb, tp1);
} else if (tp1->sent == SCTP_DATAGRAM_RESEND) {
Use the proper increment macro when increasing the number on sent_queue_retran_cnt. MFC after: 1 week
2010-06-05 21:22:58 +00:00
sctp_ucount_incr(asoc->sent_queue_retran_cnt);
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
}
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
}
}
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
done_once = 1;
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
goto again;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/**********************************/
/* Now what about shutdown issues */
/**********************************/
if (TAILQ_EMPTY(&asoc->send_queue) && TAILQ_EMPTY(&asoc->sent_queue)) {
/* nothing left on sendqueue.. consider done */
/* clean up */
if ((asoc->stream_queue_cnt == 1) &&
((asoc->state & SCTP_STATE_SHUTDOWN_PENDING) ||
(asoc->state & SCTP_STATE_SHUTDOWN_RECEIVED)) &&
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
((*asoc->ss_functions.sctp_ss_is_user_msgs_incomplete) (stcb, asoc))) {
asoc->state |= SCTP_STATE_PARTIAL_MSG_LEFT;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
if ((asoc->state & SCTP_STATE_SHUTDOWN_PENDING) &&
(asoc->stream_queue_cnt == 0)) {
if (asoc->state & SCTP_STATE_PARTIAL_MSG_LEFT) {
/* Need to abort here */
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
struct mbuf *op_err;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
abort_out_now:
*abort_now = 1;
/* XXX */
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
op_err = sctp_generate_cause(SCTP_CAUSE_USER_INITIATED_ABT, "");
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_24;
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
sctp_abort_an_association(stcb->sctp_ep, stcb, op_err, SCTP_SO_NOT_LOCKED);
Stop processing of a SACK when the association has been aborted. MFC after: 3 days
2015-12-21 18:52:02 +00:00
return;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
struct sctp_nets *netp;
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
if ((SCTP_GET_STATE(asoc) == SCTP_STATE_OPEN) ||
(SCTP_GET_STATE(asoc) == SCTP_STATE_SHUTDOWN_RECEIVED)) {
SCTP_STAT_DECR_GAUGE32(sctps_currestab);
}
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_SET_STATE(asoc, SCTP_STATE_SHUTDOWN_SENT);
- fix sctp_ifn initial refcount issue (prevents deletion) - fix a bug during cookie collision that prevented an association from coming up in a specific restart case. - Fix it so the shutdown-pending flag gets removed (this is more for correctness then needed) when we enter shutdown-sent or shutdown-ack-sent states. - Fix a bug that caused the receiver to sometimes NOT send a SACK when a duplicate TSN arrived. Without this fix it was possible for the association to fall down if the - Deleted primary destination is also stored when SCTP_MOBILITY_BASE. (Previously, it is stored when only SCTP_MOBILITY_FASTHANDOFF) - Fix a locking issue where we might call send_initiate_ack() and incorrectly state the lock held/not held. Also fix it so that when we release the lock the inp cannot be deleted on us. - Add the debug option that can cause the stack to panic instead of aborting an assoc. This does not and should never show up in options but is useful for debugging unexpected aborts. - Add cumack_log sent to track sending cumack information for the debug case where we are running a special log per assoc. - Added extra () aroudn sctp_sbspace macro to avoid compile warnings. MFC after: 1 week
2007-10-16 14:05:51 +00:00
SCTP_CLEAR_SUBSTATE(asoc, SCTP_STATE_SHUTDOWN_PENDING);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_stop_timers_for_shutdown(stcb);
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if (asoc->alternate) {
netp = asoc->alternate;
} else {
netp = asoc->primary_destination;
}
sctp_send_shutdown(stcb, netp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_SHUTDOWN,
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
stcb->sctp_ep, stcb, netp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_SHUTDOWNGUARD,
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
stcb->sctp_ep, stcb, netp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
} else if ((SCTP_GET_STATE(asoc) == SCTP_STATE_SHUTDOWN_RECEIVED) &&
(asoc->stream_queue_cnt == 0)) {
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
struct sctp_nets *netp;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (asoc->state & SCTP_STATE_PARTIAL_MSG_LEFT) {
goto abort_out_now;
}
SCTP_STAT_DECR_GAUGE32(sctps_currestab);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_SET_STATE(asoc, SCTP_STATE_SHUTDOWN_ACK_SENT);
- fix sctp_ifn initial refcount issue (prevents deletion) - fix a bug during cookie collision that prevented an association from coming up in a specific restart case. - Fix it so the shutdown-pending flag gets removed (this is more for correctness then needed) when we enter shutdown-sent or shutdown-ack-sent states. - Fix a bug that caused the receiver to sometimes NOT send a SACK when a duplicate TSN arrived. Without this fix it was possible for the association to fall down if the - Deleted primary destination is also stored when SCTP_MOBILITY_BASE. (Previously, it is stored when only SCTP_MOBILITY_FASTHANDOFF) - Fix a locking issue where we might call send_initiate_ack() and incorrectly state the lock held/not held. Also fix it so that when we release the lock the inp cannot be deleted on us. - Add the debug option that can cause the stack to panic instead of aborting an assoc. This does not and should never show up in options but is useful for debugging unexpected aborts. - Add cumack_log sent to track sending cumack information for the debug case where we are running a special log per assoc. - Added extra () aroudn sctp_sbspace macro to avoid compile warnings. MFC after: 1 week
2007-10-16 14:05:51 +00:00
SCTP_CLEAR_SUBSTATE(asoc, SCTP_STATE_SHUTDOWN_PENDING);
Not only stop all timers when entering the SHUTDOWN_SENT state, but also when entering the SHUTDOWN_ACK_SEND state. MFC after: 3 days.
2010-11-07 14:39:40 +00:00
sctp_stop_timers_for_shutdown(stcb);
Fix a bug where HEARTBEATs were still sent in SHUTDOWN_SENT or SHUTDOWN_ACK_SENT state. While there, make the corresponding code consistent. MFC after: 1 week
2013-02-09 08:27:08 +00:00
if (asoc->alternate) {
netp = asoc->alternate;
} else {
netp = asoc->primary_destination;
}
sctp_send_shutdown_ack(stcb, netp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_SHUTDOWNACK,
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
stcb->sctp_ep, stcb, netp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
- PR-SCTP bug, where the CUM-ACK was not being updated into the advance_peer_ack point so we would incorrectly send a wrong value in the FWD-TSN - PR-SCTP bug, where an PR packet is used for a window probe which could incorrectly get the packet moved back into the send_queue, which will cause major issues and should not happen. - Fix a trace to use the proper macro.
2009-03-04 20:54:42 +00:00
/*********************************************/
/* Here we perform PR-SCTP procedures */
/* (section 4.2) */
/*********************************************/
/* C1. update advancedPeerAckPoint */
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(cumack, asoc->advanced_peer_ack_point)) {
- PR-SCTP bug, where the CUM-ACK was not being updated into the advance_peer_ack point so we would incorrectly send a wrong value in the FWD-TSN - PR-SCTP bug, where an PR packet is used for a window probe which could incorrectly get the packet moved back into the send_queue, which will cause major issues and should not happen. - Fix a trace to use the proper macro.
2009-03-04 20:54:42 +00:00
asoc->advanced_peer_ack_point = cumack;
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
/* PR-Sctp issues need to be addressed too */
Add support for the SCTP_PR_SUPPORTED socket option as specified in http://tools.ietf.org/html/draft-ietf-tsvwg-sctp-prpolicies Add also a sysctl controlling the default of the end-points. MFC after: 1 week
2014-08-02 21:36:40 +00:00
if ((asoc->prsctp_supported) && (asoc->pr_sctp_cnt > 0)) {
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
struct sctp_tmit_chunk *lchk;
uint32_t old_adv_peer_ack_point;
old_adv_peer_ack_point = asoc->advanced_peer_ack_point;
lchk = sctp_try_advance_peer_ack_point(stcb, asoc);
/* C3. See if we need to send a Fwd-TSN */
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(asoc->advanced_peer_ack_point, cumack)) {
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
/*
More ECN fixes: 1) We now remove ECN-Nonce since it will no longer continue as a I-D 2) Eliminate last_tsn_echo, this tied us to an assoc not the net and thus we were not doing m-homing on the ECN-Echo senders side right. 3) Increment the count going out even if the TSN in lower in the pending ECN-Echo, this way the receiver knows exactly how many packets were marked even with network re-ordering 4) Fix so we DO NOT stop doing delayed sack if a ECN Echo is in queue MFC after: 1 month
2011-01-31 11:50:11 +00:00
* ISSUE with ECN, see FWD-TSN processing.
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
*/
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(asoc->advanced_peer_ack_point, old_adv_peer_ack_point)) {
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
send_forward_tsn(stcb, asoc);
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
} else if (lchk) {
/* try to FR fwd-tsn's that get lost too */
PR SCTP Bugs. Basically a full sized frame of PR SCTP FWD-TSN's would not be sent and thus cause a stalled connection. Also the rwnd Calculation was also off on the receiver side for PR-SCTP. MFC after: 1 month
2010-07-29 11:37:04 +00:00
if (lchk->rec.data.fwd_tsn_cnt >= 3) {
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
send_forward_tsn(stcb, asoc);
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
}
}
if (lchk) {
/* Assure a timer is up */
sctp_timer_start(SCTP_TIMER_TYPE_SEND,
stcb->sctp_ep, stcb, lchk->whoTo);
}
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_SACK_RWND_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_misc_ints(SCTP_SACK_RWND_UPDATE,
rwnd,
stcb->asoc.peers_rwnd,
stcb->asoc.total_flight,
stcb->asoc.total_output_queue_size);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
void
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
sctp_handle_sack(struct mbuf *m, int offset_seg, int offset_dup,
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
struct sctp_tcb *stcb,
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
uint16_t num_seg, uint16_t num_nr_seg, uint16_t num_dup,
int *abort_now, uint8_t flags,
1) Allow a chunk to track the cwnd it was at when sent. 2) Add separate max-bursts for retransmit and hb. These are set to sysctlable values but not settable via the socket api. This makes sure we don't blast out HB's or fast-retransmits. 3) Determine on the first data transmission on a net if its local-lan (by being under or over a RTT). This can later be used to think about different algorithms based on locallan vs big-i (experimental) 4) The cwnd should NOT be allowed to grow when an ECNEcho is seen (TCP has this same bug). We fix this in SCTP so an ECNe being seen prevents an advance of cwnd. 5) CWR's should not be sent multiple times to the same network, instead just updating the TSN being transmitted if needed. MFC after: 1 Month
2011-02-02 11:13:23 +00:00
uint32_t cum_ack, uint32_t rwnd, int ecne_seen)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_association *asoc;
struct sctp_tmit_chunk *tp1, *tp2;
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
uint32_t last_tsn, biggest_tsn_acked, biggest_tsn_newly_acked, this_sack_lowest_newack;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
uint16_t wake_him = 0;
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
uint32_t send_s = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
long j;
int accum_moved = 0;
int will_exit_fast_recovery = 0;
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
uint32_t a_rwnd, old_rwnd;
int win_probe_recovery = 0;
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
int win_probe_recovered = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_nets *net = NULL;
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
int done_once;
Tunes and fixes the new DC-CC to seem to hit the right mix. Still may need some tweaks but it appears to almost not give away too much to an RFC2581 flow, but can really minimize the amount of buffers used in the net. MFC after: 3 months
2011-03-08 11:58:25 +00:00
int rto_ok = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
uint8_t reneged_all = 0;
uint8_t cmt_dac_flag;
/*
* we take any chance we can to service our queues since we cannot
* get awoken when the socket is read from :<
*/
/*
* Now perform the actual SACK handling: 1) Verify that it is not an
* old sack, if so discard. 2) If there is nothing left in the send
* queue (cum-ack is equal to last acked) then you have a duplicate
* too, update any rwnd change and verify no timers are running.
* then return. 3) Process any new consequtive data i.e. cum-ack
* moved process these first and note that it moved. 4) Process any
* sack blocks. 5) Drop any acked from the queue. 6) Check for any
* revoked blocks and mark. 7) Update the cwnd. 8) Nothing left,
* sync up flightsizes and things, stop all timers and also check
* for shutdown_pending state. If so then go ahead and send off the
* shutdown. If in shutdown recv, send off the shutdown-ack and
* start that timer, Ret. 9) Strike any non-acked things and do FR
* procedure if needed being sure to set the FR flag. 10) Do pr-sctp
* procedures. 11) Apply any FR penalties. 12) Assure we will SACK
* if in shutdown_recv state.
*/
SCTP_TCB_LOCK_ASSERT(stcb);
/* CMT DAC algo */
this_sack_lowest_newack = 0;
SCTP_STAT_INCR(sctps_slowpath_sack);
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
last_tsn = cum_ack;
cmt_dac_flag = flags & SCTP_SACK_CMT_DAC;
- added pre-checks to the bindx call. - use proper tick gathering macro instead of ticks directly. - Placed reasonable boundaries on sets that a user can do that are converted to ticks from ms. - Fix CMT_PF to always check to be sure CMT is on. - Fix ticks use of CMT_PF. - put back code to allow asconfs to be queued while INITs are in flight and before the assoc is established. - During window probes, an ack'd packet might be left with the window probe mark on it causing it to be retransmitted. Change so that the flight decrease macro clears the window_probe mark. - Additional logging flight size/reading and ASOC LOG. This is only enabled if you manually insert things into opt_sctp.h since its a set of debug code only. - Found an interesting SMP race in the way data was appended which could cause a reader to lose a part of a message, had to reorder when we marked the message was complete to after the data was appended. - bug in ADD-IP for the subset bound socket case when the peer has only one address - fix ASCONF implicit success/error handling case - proper support of jails in Freebsd 6> - copy out the timeval for the 64 bit sparc world on cookie-echo alignment error crashes without this). Approved by: re(Ken Smith)
2007-07-17 20:58:26 +00:00
#ifdef SCTP_ASOCLOG_OF_TSNS
stcb->asoc.cumack_log[stcb->asoc.cumack_log_at] = cum_ack;
stcb->asoc.cumack_log_at++;
if (stcb->asoc.cumack_log_at > SCTP_TSN_LOG_SIZE) {
stcb->asoc.cumack_log_at = 0;
}
#endif
- Somehow the disable fragment option got lost. We could set/clear it but would not do it. Now we will. - Moved to latest socket api for extended sndrcv info struct. - Moved to support all new levels of fragment interleave (0-2). - Codenomicon security test updates - length checks and such. - Bug in stream reset (2 actually). - setpeerprimary could unlock a null pointer, fixed. - Added a flag in the pcb so netstat can see if we are listening easier. Obtained from: (some of the Listen changes from Weongyo Jeong)
2007-05-02 12:50:13 +00:00
a_rwnd = rwnd;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LOG_SACK_ARRIVALS_ENABLE) {
sctp_misc_ints(SCTP_SACK_LOG_NORMAL, cum_ack,
rwnd, stcb->asoc.last_acked_seq, stcb->asoc.peers_rwnd);
}
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
old_rwnd = stcb->asoc.peers_rwnd;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_THRESHOLD_LOGGING) {
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
sctp_misc_ints(SCTP_THRESHOLD_CLEAR,
stcb->asoc.overall_error_count,
0,
SCTP_FROM_SCTP_INDATA,
__LINE__);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
stcb->asoc.overall_error_count = 0;
asoc = &stcb->asoc;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_SACK_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_sack(asoc->last_acked_seq,
cum_ack,
0,
num_seg,
num_dup,
SCTP_LOG_NEW_SACK);
}
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if ((num_dup) && (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FR_LOGGING_ENABLE)) {
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
uint16_t i;
- Issue one, new stack reduction left packet_drop handling still thinking it had the whole chunk. This could cause a crash if a large packet drop came in. Fixed by adjusting the trunc length down to the limit. - Large sacks with lots of segments could also have same issue. Changed duplicate and segment handling to use proper get_m_ptr function to pull each block from mbuf chains.
2007-06-15 17:59:57 +00:00
uint32_t *dupdata, dblock;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
for (i = 0; i < num_dup; i++) {
dupdata = (uint32_t *) sctp_m_getptr(m, offset_dup + i * sizeof(uint32_t),
- Issue one, new stack reduction left packet_drop handling still thinking it had the whole chunk. This could cause a crash if a large packet drop came in. Fixed by adjusting the trunc length down to the limit. - Large sacks with lots of segments could also have same issue. Changed duplicate and segment handling to use proper get_m_ptr function to pull each block from mbuf chains.
2007-06-15 17:59:57 +00:00
sizeof(uint32_t), (uint8_t *) & dblock);
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
if (dupdata == NULL) {
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
sctp_log_fr(*dupdata, 0, 0, SCTP_FR_DUPED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
Retire net.inet.sctp.strict_sacks and net.inet.sctp.strict_data_order sysctl's, since they where only there to interop with non-conformant implementations. This should not be a problem anymore.
2016-05-12 16:34:59 +00:00
/* reality check */
if (!TAILQ_EMPTY(&asoc->sent_queue)) {
tp1 = TAILQ_LAST(&asoc->sent_queue,
sctpchunk_listhead);
send_s = tp1->rec.data.TSN_seq + 1;
} else {
tp1 = NULL;
send_s = asoc->sending_seq;
}
if (SCTP_TSN_GE(cum_ack, send_s)) {
struct mbuf *op_err;
char msg[SCTP_DIAG_INFO_LEN];
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
Retire net.inet.sctp.strict_sacks and net.inet.sctp.strict_data_order sysctl's, since they where only there to interop with non-conformant implementations. This should not be a problem anymore.
2016-05-12 16:34:59 +00:00
/*
* no way, we have not even sent this TSN out yet. Peer is
* hopelessly messed up with us.
*/
SCTP_PRINTF("NEW cum_ack:%x send_s:%x is smaller or equal\n",
cum_ack, send_s);
if (tp1) {
SCTP_PRINTF("Got send_s from tsn:%x + 1 of tp1: %p\n",
tp1->rec.data.TSN_seq, (void *)tp1);
}
hopeless_peer:
*abort_now = 1;
/* XXX */
snprintf(msg, sizeof(msg), "Cum ack %8.8x greater or equal than TSN %8.8x",
cum_ack, send_s);
op_err = sctp_generate_cause(SCTP_CAUSE_PROTOCOL_VIOLATION, msg);
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_25;
sctp_abort_an_association(stcb->sctp_ep, stcb, op_err, SCTP_SO_NOT_LOCKED);
return;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/**********************/
/* 1) check the range */
/**********************/
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(asoc->last_acked_seq, last_tsn)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* acking something behind */
return;
}
/* update the Rwnd of the peer */
if (TAILQ_EMPTY(&asoc->sent_queue) &&
TAILQ_EMPTY(&asoc->send_queue) &&
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
(asoc->stream_queue_cnt == 0)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* nothing left on send/sent and strmq */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LOG_RWND_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_rwnd_set(SCTP_SET_PEER_RWND_VIA_SACK,
asoc->peers_rwnd, 0, 0, a_rwnd);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->peers_rwnd = a_rwnd;
if (asoc->sent_queue_retran_cnt) {
asoc->sent_queue_retran_cnt = 0;
}
if (asoc->peers_rwnd < stcb->sctp_ep->sctp_ep.sctp_sws_sender) {
/* SWS sender side engages */
asoc->peers_rwnd = 0;
}
/* stop any timers */
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
sctp_timer_stop(SCTP_TIMER_TYPE_SEND, stcb->sctp_ep,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
stcb, net, SCTP_FROM_SCTP_INDATA + SCTP_LOC_26);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
net->partial_bytes_acked = 0;
net->flight_size = 0;
}
asoc->total_flight = 0;
asoc->total_flight_count = 0;
return;
}
/*
* We init netAckSz and netAckSz2 to 0. These are used to track 2
* things. The total byte count acked is tracked in netAckSz AND
* netAck2 is used to track the total bytes acked that are un-
* amibguious and were never retransmitted. We track these on a per
* destination address basis.
*/
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
Fixes to ECN in SCTP. 1) ECN was on an association basis, this is incorrect and will not work with CMT or for that matter if the user is sending to multiple addresses. This commit makes ECN on a per path basis. 2) Adopt the new format for the ECN internet draft. This also maintains compatability with old format chunks as well. 3) Keep track of the real time of a RTT down to micro seconds. For some future conditional features (for like a data center this is good information to have). MFC after: 1 month
2011-01-29 19:55:29 +00:00
if (SCTP_TSN_GT(cum_ack, net->cwr_window_tsn)) {
/* Drag along the window_tsn for cwr's */
net->cwr_window_tsn = cum_ack;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
net->prev_cwnd = net->cwnd;
net->net_ack = 0;
net->net_ack2 = 0;
/*
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
* CMT: Reset CUC and Fast recovery algo variables before
* SACK processing
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
net->new_pseudo_cumack = 0;
net->will_exit_fast_recovery = 0;
Improvements to CC modules: 1) Add four new points that allow you to get more information to cc algo's 2) Fix the case where user changes module on a existing TCB, in such a case, the initialization module needs to be called on all nets. 3) Move htcp_cc structure to a union that other modules can use. 4) Add 5th point for get/set socket options for cc_module specific options MFC after: 2 months
2011-02-26 15:23:46 +00:00
if (stcb->asoc.cc_functions.sctp_cwnd_prepare_net_for_sack) {
(*stcb->asoc.cc_functions.sctp_cwnd_prepare_net_for_sack) (stcb, net);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* process the new consecutive TSN first */
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
TAILQ_FOREACH(tp1, &asoc->sent_queue, sctp_next) {
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GE(last_tsn, tp1->rec.data.TSN_seq)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (tp1->sent != SCTP_DATAGRAM_UNSENT) {
accum_moved = 1;
if (tp1->sent < SCTP_DATAGRAM_ACKED) {
/*
* If it is less than ACKED, it is
* now no-longer in flight. Higher
* values may occur during marking
*/
if ((tp1->whoTo->dest_state &
SCTP_ADDR_UNCONFIRMED) &&
(tp1->snd_count < 2)) {
/*
* If there was no retran
* and the address is
* un-confirmed and we sent
* there and are now
* sacked.. its confirmed,
* mark it so.
*/
tp1->whoTo->dest_state &=
~SCTP_ADDR_UNCONFIRMED;
}
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
if (tp1->sent < SCTP_DATAGRAM_RESEND) {
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FLIGHT_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_misc_ints(SCTP_FLIGHT_LOG_DOWN_CA,
tp1->whoTo->flight_size,
tp1->book_size,
Improve compilation on windows 64-bit (for the userland stack). MFC after: 1 week
2016-03-27 10:04:25 +00:00
(uint32_t) (uintptr_t) tp1->whoTo,
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
tp1->rec.data.TSN_seq);
}
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
sctp_flight_size_decrease(tp1);
sctp_total_flight_decrease(stcb, tp1);
Improvements to CC modules: 1) Add four new points that allow you to get more information to cc algo's 2) Fix the case where user changes module on a existing TCB, in such a case, the initialization module needs to be called on all nets. 3) Move htcp_cc structure to a union that other modules can use. 4) Add 5th point for get/set socket options for cc_module specific options MFC after: 2 months
2011-02-26 15:23:46 +00:00
if (stcb->asoc.cc_functions.sctp_cwnd_update_tsn_acknowledged) {
(*stcb->asoc.cc_functions.sctp_cwnd_update_tsn_acknowledged) (tp1->whoTo,
tp1);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
tp1->whoTo->net_ack += tp1->send_size;
/* CMT SFR and DAC algos */
this_sack_lowest_newack = tp1->rec.data.TSN_seq;
tp1->whoTo->saw_newack = 1;
if (tp1->snd_count < 2) {
/*
* True non-retransmited
* chunk
*/
tp1->whoTo->net_ack2 +=
tp1->send_size;
/* update RTO too? */
if (tp1->do_rtt) {
Tunes and fixes the new DC-CC to seem to hit the right mix. Still may need some tweaks but it appears to almost not give away too much to an RFC2581 flow, but can really minimize the amount of buffers used in the net. MFC after: 3 months
2011-03-08 11:58:25 +00:00
if (rto_ok) {
tp1->whoTo->RTO =
sctp_calculate_rto(stcb,
asoc, tp1->whoTo,
&tp1->sent_rcv_time,
sctp_align_safe_nocopy,
SCTP_RTT_FROM_DATA);
rto_ok = 0;
}
if (tp1->whoTo->rto_needed == 0) {
tp1->whoTo->rto_needed = 1;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
tp1->do_rtt = 0;
}
}
/*
* CMT: CUCv2 algorithm. From the
* cumack'd TSNs, for each TSN being
* acked for the first time, set the
* following variables for the
* corresp destination.
* new_pseudo_cumack will trigger a
* cwnd update.
* find_(rtx_)pseudo_cumack will
* trigger search for the next
* expected (rtx-)pseudo-cumack.
*/
tp1->whoTo->new_pseudo_cumack = 1;
tp1->whoTo->find_pseudo_cumack = 1;
tp1->whoTo->find_rtx_pseudo_cumack = 1;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_SACK_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_sack(asoc->last_acked_seq,
cum_ack,
tp1->rec.data.TSN_seq,
0,
0,
SCTP_LOG_TSN_ACKED);
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_CWND_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_cwnd(stcb, tp1->whoTo, tp1->rec.data.TSN_seq, SCTP_CWND_LOG_FROM_SACK);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
if (tp1->sent == SCTP_DATAGRAM_RESEND) {
sctp_ucount_decr(asoc->sent_queue_retran_cnt);
#ifdef SCTP_AUDITING_ENABLED
sctp_audit_log(0xB3,
(asoc->sent_queue_retran_cnt & 0x000000ff));
#endif
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (tp1->rec.data.chunk_was_revoked) {
/* deflate the cwnd */
tp1->whoTo->cwnd -= tp1->book_size;
tp1->rec.data.chunk_was_revoked = 0;
}
Get the accounting working. We now have counters how many chunks for each SCTP outgoing stream are in the send and sent queue. While there, improve the naming of NR-SACK related constants recently introduced. MFC after: 1 week
2012-11-16 19:39:10 +00:00
if (tp1->sent != SCTP_DATAGRAM_NR_ACKED) {
tp1->sent = SCTP_DATAGRAM_ACKED;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
} else {
break;
}
}
biggest_tsn_newly_acked = biggest_tsn_acked = last_tsn;
/* always set this up to cum-ack */
asoc->this_sack_highest_gap = last_tsn;
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
if ((num_seg > 0) || (num_nr_seg > 0)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* CMT: SFR algo (and HTNA) - this_sack_highest_newack has
* to be greater than the cumack. Also reset saw_newack to 0
* for all dests.
*/
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
net->saw_newack = 0;
net->this_sack_highest_newack = last_tsn;
}
/*
* thisSackHighestGap will increase while handling NEW
* segments this_sack_highest_newack will increase while
* handling NEWLY ACKED chunks. this_sack_lowest_newack is
* used for CMT DAC algo. saw_newack will also change.
*/
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
if (sctp_handle_segments(m, &offset_seg, stcb, asoc, last_tsn, &biggest_tsn_acked,
&biggest_tsn_newly_acked, &this_sack_lowest_newack,
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
num_seg, num_nr_seg, &rto_ok)) {
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
wake_him++;
}
Retire net.inet.sctp.strict_sacks and net.inet.sctp.strict_data_order sysctl's, since they where only there to interop with non-conformant implementations. This should not be a problem anymore.
2016-05-12 16:34:59 +00:00
/*
* validate the biggest_tsn_acked in the gap acks if strict
* adherence is wanted.
*/
if (SCTP_TSN_GE(biggest_tsn_acked, send_s)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
Retire net.inet.sctp.strict_sacks and net.inet.sctp.strict_data_order sysctl's, since they where only there to interop with non-conformant implementations. This should not be a problem anymore.
2016-05-12 16:34:59 +00:00
* peer is either confused or we are under attack.
* We must abort.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
Retire net.inet.sctp.strict_sacks and net.inet.sctp.strict_data_order sysctl's, since they where only there to interop with non-conformant implementations. This should not be a problem anymore.
2016-05-12 16:34:59 +00:00
SCTP_PRINTF("Hopeless peer! biggest_tsn_acked:%x largest seq:%x\n",
biggest_tsn_acked, send_s);
goto hopeless_peer;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
/*******************************************/
/* cancel ALL T3-send timer if accum moved */
/*******************************************/
Improve plausibility check in sctp_handle_sack(). Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP). MFC after: 3 months.
2010-12-22 17:59:38 +00:00
if (asoc->sctp_cmt_on_off > 0) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
if (net->new_pseudo_cumack)
sctp_timer_stop(SCTP_TIMER_TYPE_SEND, stcb->sctp_ep,
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
stcb, net,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
SCTP_FROM_SCTP_INDATA + SCTP_LOC_27);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
} else {
if (accum_moved) {
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
sctp_timer_stop(SCTP_TIMER_TYPE_SEND, stcb->sctp_ep,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
stcb, net, SCTP_FROM_SCTP_INDATA + SCTP_LOC_28);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
/********************************************/
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
/* drop the acked chunks from the sentqueue */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/********************************************/
asoc->last_acked_seq = cum_ack;
Improve plausibility check in sctp_handle_sack(). Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP). MFC after: 3 months.
2010-12-22 17:59:38 +00:00
TAILQ_FOREACH_SAFE(tp1, &asoc->sent_queue, sctp_next, tp2) {
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(tp1->rec.data.TSN_seq, cum_ack)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
break;
}
Get the accounting working. We now have counters how many chunks for each SCTP outgoing stream are in the send and sent queue. While there, improve the naming of NR-SACK related constants recently introduced. MFC after: 1 week
2012-11-16 19:39:10 +00:00
if (tp1->sent != SCTP_DATAGRAM_NR_ACKED) {
Add per outgoing stream accounting for chunks in the send and sent queue. This provides no functional change, but is a preparation for an upcoming stream reset improvement. Done with rrs@. MFC after: 1 week
2012-11-07 22:11:38 +00:00
if (asoc->strmout[tp1->rec.data.stream_number].chunks_on_queues > 0) {
asoc->strmout[tp1->rec.data.stream_number].chunks_on_queues--;
#ifdef INVARIANTS
} else {
panic("No chunks on the queues for sid %u.", tp1->rec.data.stream_number);
#endif
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Ensure that outgoing streams get reset when they run dry. MFC after: 1 week
2015-12-03 15:19:29 +00:00
if ((asoc->strmout[tp1->rec.data.stream_number].chunks_on_queues == 0) &&
(asoc->strmout[tp1->rec.data.stream_number].state == SCTP_STREAM_RESET_PENDING) &&
TAILQ_EMPTY(&asoc->strmout[tp1->rec.data.stream_number].outqueue)) {
asoc->trigger_reset = 1;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_REMOVE(&asoc->sent_queue, tp1, sctp_next);
Remove redundant field pr_sctp_on. MFC after: 1 week
2013-09-03 19:31:59 +00:00
if (PR_SCTP_ENABLED(tp1->flags)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (asoc->pr_sctp_cnt != 0)
asoc->pr_sctp_cnt--;
}
Improve plausibility check in sctp_handle_sack(). Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP). MFC after: 3 months.
2010-12-22 17:59:38 +00:00
asoc->sent_queue_cnt--;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (tp1->data) {
- Incorrect error EAGAIN returned for invalid send on a locked stream (using EEOR mode). Changed to EINVAL (in sctp_output.c) - Static analysis comments added - fix in mobility code to return a value (static analysis found). - sctp6_notify function made visible instead of static (this is needed for Panda). Approved by: re@freebsd.org (B Mah)
2007-09-13 10:36:43 +00:00
/* sa_ignore NO_NULL_CHK */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_free_bufspace(stcb, asoc, tp1, 1);
sctp_m_freem(tp1->data);
Improve plausibility check in sctp_handle_sack(). Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP). MFC after: 3 months.
2010-12-22 17:59:38 +00:00
tp1->data = NULL;
Add support for the SCTP_PR_SUPPORTED socket option as specified in http://tools.ietf.org/html/draft-ietf-tsvwg-sctp-prpolicies Add also a sysctl controlling the default of the end-points. MFC after: 1 week
2014-08-02 21:36:40 +00:00
if (asoc->prsctp_supported && PR_SCTP_BUF_ENABLED(tp1->flags)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->sent_queue_cnt_removeable--;
}
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_SACK_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_sack(asoc->last_acked_seq,
cum_ack,
tp1->rec.data.TSN_seq,
0,
0,
SCTP_LOG_FREE_SENT);
}
Fix a locking issue showing up on Mac OS X when subscribing to authentication events. DTLS/SCTP renegotiations trigger the bug. MFC after: 2 weeks.
2011-05-08 09:11:59 +00:00
sctp_free_a_chunk(stcb, tp1, SCTP_SO_NOT_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
wake_him++;
Improve plausibility check in sctp_handle_sack(). Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP). MFC after: 3 months.
2010-12-22 17:59:38 +00:00
}
if (TAILQ_EMPTY(&asoc->sent_queue) && (asoc->total_flight > 0)) {
#ifdef INVARIANTS
netinet/sctp*: minor spelling fixes in comments. No functional change. Reviewed by: tuexen
2016-05-02 20:56:11 +00:00
panic("Warning flight size is positive and should be 0");
Improve plausibility check in sctp_handle_sack(). Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP). MFC after: 3 months.
2010-12-22 17:59:38 +00:00
#else
SCTP_PRINTF("Warning flight size incorrect should be 0 is %d\n",
asoc->total_flight);
#endif
asoc->total_flight = 0;
}
- Incorrect error EAGAIN returned for invalid send on a locked stream (using EEOR mode). Changed to EINVAL (in sctp_output.c) - Static analysis comments added - fix in mobility code to return a value (static analysis found). - sctp6_notify function made visible instead of static (this is needed for Panda). Approved by: re@freebsd.org (B Mah)
2007-09-13 10:36:43 +00:00
/* sa_ignore NO_NULL_CHK */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if ((wake_him) && (stcb->sctp_socket)) {
Whitespace cleanup. MFC after: 3 days
2012-06-25 17:15:09 +00:00
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
struct socket *so;
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SOCKBUF_LOCK(&stcb->sctp_socket->so_snd);
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_WAKE_LOGGING_ENABLE) {
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_wakeup_log(stcb, wake_him, SCTP_WAKESND_FROM_SACK);
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
}
Whitespace cleanup. MFC after: 3 days
2012-06-25 17:15:09 +00:00
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
so = SCTP_INP_SO(stcb->sctp_ep);
atomic_add_int(&stcb->asoc.refcnt, 1);
SCTP_TCB_UNLOCK(stcb);
SCTP_SOCKET_LOCK(so, 1);
SCTP_TCB_LOCK(stcb);
atomic_subtract_int(&stcb->asoc.refcnt, 1);
if (stcb->asoc.state & SCTP_STATE_CLOSED_SOCKET) {
/* assoc was freed while we were unlocked */
SCTP_SOCKET_UNLOCK(so, 1);
return;
}
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_sowwakeup_locked(stcb->sctp_ep, stcb->sctp_socket);
Whitespace cleanup. MFC after: 3 days
2012-06-25 17:15:09 +00:00
#if defined(__APPLE__) || defined(SCTP_SO_LOCK_TESTING)
- Locking compatiability changes. This involves adding additional flags to many function calls. The flags only get used in BSD when we compile with lock testing. These flags allow apple to escape the "giant" lock it holds on the socket and have more fine-grained locking in the NKE. It also allows us to test (with witness) the locking used by apple via a compile switch (manually applied). Approved by: re@freebsd.org(B Mah)
2007-09-08 11:35:11 +00:00
SCTP_SOCKET_UNLOCK(so, 1);
#endif
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_WAKE_LOGGING_ENABLE) {
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_wakeup_log(stcb, wake_him, SCTP_NOWAKE_FROM_SACK);
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (asoc->fast_retran_loss_recovery && accum_moved) {
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GE(asoc->last_acked_seq, asoc->fast_recovery_tsn)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Setup so we will exit RFC2582 fast recovery */
will_exit_fast_recovery = 1;
}
}
/*
* Check for revoked fragments:
*
* if Previous sack - Had no frags then we can't have any revoked if
* Previous sack - Had frag's then - If we now have frags aka
* num_seg > 0 call sctp_check_for_revoked() to tell if peer revoked
* some of them. else - The peer revoked all ACKED fragments, since
* we had some before and now we have NONE.
*/
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
if (num_seg) {
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
sctp_check_for_revoked(stcb, asoc, cum_ack, biggest_tsn_acked);
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
asoc->saw_sack_with_frags = 1;
} else if (asoc->saw_sack_with_frags) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
int cnt_revoked = 0;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
/* Peer revoked all dg's marked or acked */
TAILQ_FOREACH(tp1, &asoc->sent_queue, sctp_next) {
if (tp1->sent == SCTP_DATAGRAM_ACKED) {
tp1->sent = SCTP_DATAGRAM_SENT;
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_FLIGHT_LOGGING_ENABLE) {
sctp_misc_ints(SCTP_FLIGHT_LOG_UP_REVOKE,
tp1->whoTo->flight_size,
tp1->book_size,
Improve compilation on windows 64-bit (for the userland stack). MFC after: 1 week
2016-03-27 10:04:25 +00:00
(uint32_t) (uintptr_t) tp1->whoTo,
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
tp1->rec.data.TSN_seq);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
sctp_flight_size_increase(tp1);
sctp_total_flight_increase(stcb, tp1);
tp1->rec.data.chunk_was_revoked = 1;
/*
* To ensure that this increase in
* flightsize, which is artificial, does not
* throttle the sender, we also increase the
* cwnd artificially.
*/
tp1->whoTo->cwnd += tp1->book_size;
cnt_revoked++;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
}
if (cnt_revoked) {
reneged_all = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
asoc->saw_sack_with_frags = 0;
}
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
if (num_nr_seg > 0)
asoc->saw_sack_with_nr_frags = 1;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
else
Fix a bug where also the number of non-renegable gap reports was considered to be potentially renegable. MFC after: 1 day.
2010-12-04 19:29:49 +00:00
asoc->saw_sack_with_nr_frags = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Modular congestion control, with RFC2581 being the default. - CMT_PF states added (w/sysctl to turn the PF version on) - sctp_input.c had a missing incr of cookie case when the auth was bad. This meant a free was called without an increment to refcnt, added increment like rest of code. - There was a case, unlikely, when the scope of the destination changed (this is a TSNH case). In that case, it would not free the alloc'ed asoc (in sctp_input.c). - When listed addresses found a colliding cookie/Init, then the collided upon tcb was not unlocked in sctp_pcb.c - Add error checking on arguments of sctp_sendx(3) to prevent it from referencing a NULL pointer. - Fix an error return of sctp_sendx(3), it was returing ENOMEM not -1. - Get assoc id was changed to use the sanctified socket api method for getting a assoc id (PEER_ADDR_INFO instead of PEER_ADDR_PARAMS). - Fix it so a peeled off socket will get a proper error return if it trys to send to a different address then it is connected to. - Fix so that select_a_stream can avoid an endless loop that could hang a caller. - time_entered (state set time) was not being set in all cases to the time we went established. Approved by: re(ken smith)
2007-07-14 09:36:28 +00:00
/* JRS - Use the congestion control given in the CC module */
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
if (ecne_seen == 0) {
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
if (net->net_ack2 > 0) {
/*
* Karn's rule applies to clearing error
* count, this is optional.
*/
net->error_count = 0;
if (!(net->dest_state & SCTP_ADDR_REACHABLE)) {
/* addr came good */
net->dest_state |= SCTP_ADDR_REACHABLE;
sctp_ulp_notify(SCTP_NOTIFY_INTERFACE_UP, stcb,
Provide the error code in SCTP_PEER_ADDR_CHANGE notifications as specified in RFC 6458. MFC after: 3 days
2012-05-13 17:36:04 +00:00
0, (void *)net, SCTP_SO_NOT_LOCKED);
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
}
if (net == stcb->asoc.primary_destination) {
if (stcb->asoc.alternate) {
/*
* release the alternate,
* primary is good
*/
sctp_free_remote_addr(stcb->asoc.alternate);
stcb->asoc.alternate = NULL;
}
}
if (net->dest_state & SCTP_ADDR_PF) {
net->dest_state &= ~SCTP_ADDR_PF;
Fix and cleanup the debug information. This has no user-visible changes. Thanks to Irene Ruengeler for proving a patch. MFC after: 3 days
2015-05-28 16:00:23 +00:00
sctp_timer_stop(SCTP_TIMER_TYPE_HEARTBEAT,
stcb->sctp_ep, stcb, net,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
SCTP_FROM_SCTP_INDATA + SCTP_LOC_29);
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_HEARTBEAT, stcb->sctp_ep, stcb, net);
asoc->cc_functions.sctp_cwnd_update_exit_pf(stcb, net);
/* Done with this net */
net->net_ack = 0;
}
/* restore any doubled timers */
net->RTO = (net->lastsa >> SCTP_RTT_SHIFT) + net->lastsv;
if (net->RTO < stcb->asoc.minrto) {
net->RTO = stcb->asoc.minrto;
}
if (net->RTO > stcb->asoc.maxrto) {
net->RTO = stcb->asoc.maxrto;
}
}
}
1) Allow a chunk to track the cwnd it was at when sent. 2) Add separate max-bursts for retransmit and hb. These are set to sysctlable values but not settable via the socket api. This makes sure we don't blast out HB's or fast-retransmits. 3) Determine on the first data transmission on a net if its local-lan (by being under or over a RTT). This can later be used to think about different algorithms based on locallan vs big-i (experimental) 4) The cwnd should NOT be allowed to grow when an ECNEcho is seen (TCP has this same bug). We fix this in SCTP so an ECNe being seen prevents an advance of cwnd. 5) CWR's should not be sent multiple times to the same network, instead just updating the TSN being transmitted if needed. MFC after: 1 Month
2011-02-02 11:13:23 +00:00
asoc->cc_functions.sctp_cwnd_update_after_sack(stcb, asoc, accum_moved, reneged_all, will_exit_fast_recovery);
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (TAILQ_EMPTY(&asoc->sent_queue)) {
/* nothing left in-flight */
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
/* stop all timers */
sctp_timer_stop(SCTP_TIMER_TYPE_SEND, stcb->sctp_ep,
Fix and cleanup the debug information. This has no user-visible changes. Thanks to Irene Ruengeler for proving a patch. MFC after: 3 days
2015-05-28 16:00:23 +00:00
stcb, net,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
SCTP_FROM_SCTP_INDATA + SCTP_LOC_30);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
net->flight_size = 0;
net->partial_bytes_acked = 0;
}
asoc->total_flight = 0;
asoc->total_flight_count = 0;
}
/**********************************/
/* Now what about shutdown issues */
/**********************************/
if (TAILQ_EMPTY(&asoc->send_queue) && TAILQ_EMPTY(&asoc->sent_queue)) {
/* nothing left on sendqueue.. consider done */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LOG_RWND_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_rwnd_set(SCTP_SET_PEER_RWND_VIA_SACK,
asoc->peers_rwnd, 0, 0, a_rwnd);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->peers_rwnd = a_rwnd;
if (asoc->peers_rwnd < stcb->sctp_ep->sctp_ep.sctp_sws_sender) {
/* SWS sender side engages */
asoc->peers_rwnd = 0;
}
/* clean up */
if ((asoc->stream_queue_cnt == 1) &&
((asoc->state & SCTP_STATE_SHUTDOWN_PENDING) ||
(asoc->state & SCTP_STATE_SHUTDOWN_RECEIVED)) &&
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
((*asoc->ss_functions.sctp_ss_is_user_msgs_incomplete) (stcb, asoc))) {
asoc->state |= SCTP_STATE_PARTIAL_MSG_LEFT;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
if ((asoc->state & SCTP_STATE_SHUTDOWN_PENDING) &&
(asoc->stream_queue_cnt == 0)) {
if (asoc->state & SCTP_STATE_PARTIAL_MSG_LEFT) {
/* Need to abort here */
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
struct mbuf *op_err;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
abort_out_now:
*abort_now = 1;
/* XXX */
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
op_err = sctp_generate_cause(SCTP_CAUSE_USER_INITIATED_ABT, "");
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_31;
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
sctp_abort_an_association(stcb->sctp_ep, stcb, op_err, SCTP_SO_NOT_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
} else {
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
struct sctp_nets *netp;
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
if ((SCTP_GET_STATE(asoc) == SCTP_STATE_OPEN) ||
(SCTP_GET_STATE(asoc) == SCTP_STATE_SHUTDOWN_RECEIVED)) {
SCTP_STAT_DECR_GAUGE32(sctps_currestab);
}
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_SET_STATE(asoc, SCTP_STATE_SHUTDOWN_SENT);
- fix sctp_ifn initial refcount issue (prevents deletion) - fix a bug during cookie collision that prevented an association from coming up in a specific restart case. - Fix it so the shutdown-pending flag gets removed (this is more for correctness then needed) when we enter shutdown-sent or shutdown-ack-sent states. - Fix a bug that caused the receiver to sometimes NOT send a SACK when a duplicate TSN arrived. Without this fix it was possible for the association to fall down if the - Deleted primary destination is also stored when SCTP_MOBILITY_BASE. (Previously, it is stored when only SCTP_MOBILITY_FASTHANDOFF) - Fix a locking issue where we might call send_initiate_ack() and incorrectly state the lock held/not held. Also fix it so that when we release the lock the inp cannot be deleted on us. - Add the debug option that can cause the stack to panic instead of aborting an assoc. This does not and should never show up in options but is useful for debugging unexpected aborts. - Add cumack_log sent to track sending cumack information for the debug case where we are running a special log per assoc. - Added extra () aroudn sctp_sbspace macro to avoid compile warnings. MFC after: 1 week
2007-10-16 14:05:51 +00:00
SCTP_CLEAR_SUBSTATE(asoc, SCTP_STATE_SHUTDOWN_PENDING);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_stop_timers_for_shutdown(stcb);
Fix a bug where HEARTBEATs were still sent in SHUTDOWN_SENT or SHUTDOWN_ACK_SENT state. While there, make the corresponding code consistent. MFC after: 1 week
2013-02-09 08:27:08 +00:00
if (asoc->alternate) {
netp = asoc->alternate;
} else {
netp = asoc->primary_destination;
}
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
sctp_send_shutdown(stcb, netp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_SHUTDOWN,
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
stcb->sctp_ep, stcb, netp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_SHUTDOWNGUARD,
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
stcb->sctp_ep, stcb, netp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
return;
} else if ((SCTP_GET_STATE(asoc) == SCTP_STATE_SHUTDOWN_RECEIVED) &&
(asoc->stream_queue_cnt == 0)) {
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
struct sctp_nets *netp;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (asoc->state & SCTP_STATE_PARTIAL_MSG_LEFT) {
goto abort_out_now;
}
SCTP_STAT_DECR_GAUGE32(sctps_currestab);
- Fix address add handling to clear cached routes and source addresses when peer acks the add in case the routing table changes. - Fix sctp_lower_sosend to send shutdown chunk for mbuf send case when sndlen = 0 and sinfoflag = SCTP_EOF - Fix sctp_lower_sosend for SCTP_ABORT mbuf send case with null data, So that it does not send the "null" data mbuf out and cause it to get freed twice. - Fix so auto-asconf sysctl actually effect the socket's asconf state. - Do not allow SCTP_AUTO_ASCONF option to be used on subset bound sockets. - Memset bug in sctp_output.c (arguments were reversed) submitted found and reported by Dave Jones (davej@codemonkey.org.uk). - PD-API point needs to be invoked >= not just > to conform to socket api draft this fixes sctp_indata.c in the two places need to be >=. - move M_NOTIFICATION to use M_PROTO5. - PEER_ADDR_PARAMS did not fail properly if you specify an address that is not in the association with a valid assoc_id. This meant you got or set the stcb level values instead of the destination you thought you were going to get/set. Now validate if the stcb is non-null and the net is NULL that the sa_family is set and the address is unspecified otherwise return an error. - The thread based iterator could crash if associations were freed at the exact time it was running. rework the worker thread to use the increment/decrement to prevent this and no longer use the markers that the timer based iterator uses. - Fix the memleak in sctp_add_addr_to_vrf() for the case when it is detected that ifa is already pointing to a ifn. - Fix it so that if someone is so insane that they drop the send window below the minimal add mark, they still can send. - Changed all state for associations to use mask safe macro. - During front states in association freeing in sctp_inpcbfree, we had a locking problem where locks were not in place where they should have been. - Free association calls were not testing the return value in sctp_inpcb_free() properly... others should be cast void returns where we don't care about the return value. - If a reference count is held on an assoc, even from the "force free" we should not do the actual free.. but instead let the timer free it. - When we enter sctp_input(), if the SCTP_ASOC_ABOUT_TO_BE_FREED flag is set, we must NOT process the packet but handle it like ootb. This is because while freeing an assoc we release the locks to get all the higher order locks so we can purge all the hash tables. This leaves a hole if a packet comes in just at that point. Now sctp_common_input_processing() will call the ootb code in such a case. - Change MBUF M_NOTIFICATION to use M_PROTO5 (per Sam L). This makes it so we don't have a conflict (I think this is a covertity change). We made this change AFTER some conversation and looking to make sure that M_PROTO5 does not have a problem between SCTP and the 802.11 stuff (which is the only other place its used). - Fixed lock order reversal and missing atomic protection around locked_tcb during association lookup and the 1-2-1 model. - Added debug to source address selection. - V6 output must always do checksum even for loopback. - Remove more locks around inp that are not needed for an atomically added/subtracted ref count. - slight optimization in the way we zero the array in sctp_sack_check() - It was possible to respond to a ABORT() with bad checksum with a PKT-DROP. This lead to a PKT-DROP/ABORT war. Add code to NOT send a PKT-DROP to any ABORT(). - Add an option for local logging (useful for macintosh or when you need better performing during debugging). Note no commands are here to get the log info, you must just use kgdb. - The timer code needs to be aware of if it needs to call sctp_sack_check() to slide the maps and adjust the cum-ack. This is because it may be out of sync cum-ack wise. - Added threshold managment logging. - If the user picked just the right size, that just filled the send window minus one mtu, we would enter a forever loop not copying and at the same time not blocking. Change from < to <= solves this. - Sysctl added to control the fragment interleave level which defaults to 1. - My rwnd control was not being used to control the rwnd properly (we did not add and subtract to it :-() this is now fixed so we handle small messages (1 byte etc) better to bring our rwnd down more slowly. Approved by: re@freebsd.org (Bruce Mah)
2007-08-24 00:53:53 +00:00
SCTP_SET_STATE(asoc, SCTP_STATE_SHUTDOWN_ACK_SENT);
- fix sctp_ifn initial refcount issue (prevents deletion) - fix a bug during cookie collision that prevented an association from coming up in a specific restart case. - Fix it so the shutdown-pending flag gets removed (this is more for correctness then needed) when we enter shutdown-sent or shutdown-ack-sent states. - Fix a bug that caused the receiver to sometimes NOT send a SACK when a duplicate TSN arrived. Without this fix it was possible for the association to fall down if the - Deleted primary destination is also stored when SCTP_MOBILITY_BASE. (Previously, it is stored when only SCTP_MOBILITY_FASTHANDOFF) - Fix a locking issue where we might call send_initiate_ack() and incorrectly state the lock held/not held. Also fix it so that when we release the lock the inp cannot be deleted on us. - Add the debug option that can cause the stack to panic instead of aborting an assoc. This does not and should never show up in options but is useful for debugging unexpected aborts. - Add cumack_log sent to track sending cumack information for the debug case where we are running a special log per assoc. - Added extra () aroudn sctp_sbspace macro to avoid compile warnings. MFC after: 1 week
2007-10-16 14:05:51 +00:00
SCTP_CLEAR_SUBSTATE(asoc, SCTP_STATE_SHUTDOWN_PENDING);
Not only stop all timers when entering the SHUTDOWN_SENT state, but also when entering the SHUTDOWN_ACK_SEND state. MFC after: 3 days.
2010-11-07 14:39:40 +00:00
sctp_stop_timers_for_shutdown(stcb);
Fix a bug where HEARTBEATs were still sent in SHUTDOWN_SENT or SHUTDOWN_ACK_SENT state. While there, make the corresponding code consistent. MFC after: 1 week
2013-02-09 08:27:08 +00:00
if (asoc->alternate) {
netp = asoc->alternate;
} else {
netp = asoc->primary_destination;
}
sctp_send_shutdown_ack(stcb, netp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_SHUTDOWNACK,
The result of a joint work between rrs@ and myself at the IETF: * Decouple the path supervision using a separate HB timer per path. * Add support for potentially failed state. * Bring back RTO.min to 1 second. * Accept packets on IP-addresses already announced via an ASCONF * While there: do some cleanups. Approved by: re@ MFC after: 2 months.
2011-08-03 20:21:00 +00:00
stcb->sctp_ep, stcb, netp);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
}
}
/*
* Now here we are going to recycle net_ack for a different use...
* HEADS UP.
*/
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
net->net_ack = 0;
}
/*
* CMT DAC algorithm: If SACK DAC flag was 0, then no extra marking
* to be done. Setting this_sack_lowest_newack to the cum_ack will
* automatically ensure that.
*/
Improve plausibility check in sctp_handle_sack(). Allow cmt_on_off to support values 0 (no CMT), 1 (CMT), and 2 (CMT/RP). MFC after: 3 months.
2010-12-22 17:59:38 +00:00
if ((asoc->sctp_cmt_on_off > 0) &&
Fix the switching on/off of CMT using sysctl and socket option. Fix the switching on/off of PF and NR-SACKs using sysctl. Add minor improvement in handling malloc failures. Improve the address checks when sending. MFC after: 4 weeks
2010-08-28 17:59:51 +00:00
SCTP_BASE_SYSCTL(sctp_cmt_use_dac) &&
(cmt_dac_flag == 0)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
this_sack_lowest_newack = cum_ack;
}
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
if ((num_seg > 0) || (num_nr_seg > 0)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_strike_gap_ack_chunks(stcb, asoc, biggest_tsn_acked,
biggest_tsn_newly_acked, this_sack_lowest_newack, accum_moved);
}
- Modular congestion control, with RFC2581 being the default. - CMT_PF states added (w/sysctl to turn the PF version on) - sctp_input.c had a missing incr of cookie case when the auth was bad. This meant a free was called without an increment to refcnt, added increment like rest of code. - There was a case, unlikely, when the scope of the destination changed (this is a TSNH case). In that case, it would not free the alloc'ed asoc (in sctp_input.c). - When listed addresses found a colliding cookie/Init, then the collided upon tcb was not unlocked in sctp_pcb.c - Add error checking on arguments of sctp_sendx(3) to prevent it from referencing a NULL pointer. - Fix an error return of sctp_sendx(3), it was returing ENOMEM not -1. - Get assoc id was changed to use the sanctified socket api method for getting a assoc id (PEER_ADDR_INFO instead of PEER_ADDR_PARAMS). - Fix it so a peeled off socket will get a proper error return if it trys to send to a different address then it is connected to. - Fix so that select_a_stream can avoid an endless loop that could hang a caller. - time_entered (state set time) was not being set in all cases to the time we went established. Approved by: re(ken smith)
2007-07-14 09:36:28 +00:00
/* JRS - Use the congestion control given in the CC module */
asoc->cc_functions.sctp_cwnd_update_after_fr(stcb, asoc);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Now are we exiting loss recovery ? */
if (will_exit_fast_recovery) {
/* Ok, we must exit fast recovery */
asoc->fast_retran_loss_recovery = 0;
}
if ((asoc->sat_t3_loss_recovery) &&
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
SCTP_TSN_GE(asoc->last_acked_seq, asoc->sat_t3_recovery_tsn)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* end satellite t3 loss recovery */
asoc->sat_t3_loss_recovery = 0;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/*
* CMT Fast recovery
*/
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
if (net->will_exit_fast_recovery) {
/* Ok, we must exit fast recovery */
net->fast_retran_loss_recovery = 0;
}
}
/* Adjust and set the new rwnd value */
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LOG_RWND_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_rwnd_set(SCTP_SET_PEER_RWND_VIA_SACK,
PR SCTP Bugs. Basically a full sized frame of PR SCTP FWD-TSN's would not be sent and thus cause a stalled connection. Also the rwnd Calculation was also off on the receiver side for PR-SCTP. MFC after: 1 month
2010-07-29 11:37:04 +00:00
asoc->peers_rwnd, asoc->total_flight, (asoc->total_flight_count * SCTP_BASE_SYSCTL(sctp_peer_chunk_oh)), a_rwnd);
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc->peers_rwnd = sctp_sbspace_sub(a_rwnd,
PR SCTP Bugs. Basically a full sized frame of PR SCTP FWD-TSN's would not be sent and thus cause a stalled connection. Also the rwnd Calculation was also off on the receiver side for PR-SCTP. MFC after: 1 month
2010-07-29 11:37:04 +00:00
(uint32_t) (asoc->total_flight + (asoc->total_flight_count * SCTP_BASE_SYSCTL(sctp_peer_chunk_oh))));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (asoc->peers_rwnd < stcb->sctp_ep->sctp_ep.sctp_sws_sender) {
/* SWS sender side engages */
asoc->peers_rwnd = 0;
}
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
if (asoc->peers_rwnd > old_rwnd) {
win_probe_recovery = 1;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* Now we must setup so we have a timer up for anyone with
* outstanding data.
*/
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
done_once = 0;
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
again:
j = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
if (win_probe_recovery && (net->window_probe)) {
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
win_probe_recovered = 1;
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
/*-
* Find first chunk that was used with
* window probe and clear the event. Put
* it back into the send queue as if has
* not been sent.
*/
TAILQ_FOREACH(tp1, &asoc->sent_queue, sctp_next) {
if (tp1->window_probe) {
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_window_probe_recovery(stcb, asoc, tp1);
- Found bug in min split point bundling which caused incorrect, non-bundlable fragmentation. - Added min residual to better control split points for both how big a msg must be as well as how much needs to be left over. - With our new algo in place, we need to implicitly set "end of msg" on the sp-> structure otherwise we end up with "hung" associations. - Room reserved up front in IP header by pushing IP header to back of mbuf. - Fix so FR's peg count of retransmissions needed. - Fix so an unlucky chunk that never gets across will kill the assoc via the kill timer and send an abort too. - Fix bug in sctp_input which can result in a crash. - Do not strip off IP options anymore. - Clean up sctp_calculate_rto(). - Get rid of unused sysctl. - Fixed so we discard all M-Cast - Fixed so port check done AFTER checksum - Fixed bug in fragmentation code that prevented us from fragmenting a small complete message when we needed to. - Window probes were not marked back to unsent and flight adjusted when a sack came in with no window change or accepting of the probe data. We now fix this with having a mark on the net and the chunk so we can clear it out when the sack arrives forcing it to retran just like it was "new" this improves the handling of window probes, which were dropped by the receiver. - Tighten AUTH protocol error checks during INIT/INIT-ACK exchange
2007-03-31 11:47:30 +00:00
break;
}
}
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (net->flight_size) {
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
j++;
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
if (!SCTP_OS_TIMER_PENDING(&net->rxt_timer.timer)) {
sctp_timer_start(SCTP_TIMER_TYPE_SEND,
stcb->sctp_ep, stcb, net);
}
Fixes for window probes: 1) WP should never be marked unless flight size is 0 2) When recovering from wp if the peer ack's it we don't mark for retran 3) When recovering, we must assure a timer is still running.
2009-03-06 11:03:52 +00:00
if (net->window_probe) {
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
net->window_probe = 0;
Fixes for window probes: 1) WP should never be marked unless flight size is 0 2) When recovering from wp if the peer ack's it we don't mark for retran 3) When recovering, we must assure a timer is still running.
2009-03-06 11:03:52 +00:00
}
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
} else {
Fixes for window probes: 1) WP should never be marked unless flight size is 0 2) When recovering from wp if the peer ack's it we don't mark for retran 3) When recovering, we must assure a timer is still running.
2009-03-06 11:03:52 +00:00
if (net->window_probe) {
/*
* In window probes we must assure a timer
* is still running there
*/
if (!SCTP_OS_TIMER_PENDING(&net->rxt_timer.timer)) {
sctp_timer_start(SCTP_TIMER_TYPE_SEND,
stcb->sctp_ep, stcb, net);
}
} else if (SCTP_OS_TIMER_PENDING(&net->rxt_timer.timer)) {
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
sctp_timer_stop(SCTP_TIMER_TYPE_SEND, stcb->sctp_ep,
stcb, net,
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
SCTP_FROM_SCTP_INDATA + SCTP_LOC_32);
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
if ((j == 0) &&
(!TAILQ_EMPTY(&asoc->sent_queue)) &&
(asoc->sent_queue_retran_cnt == 0) &&
- fix source address selection when picking an acceptable address - name change of prefered -> preferred - CMT fast recover code added. - Comment fixes in CMT. - We were not giving a reason of cant_start_asoc per socket api if we failed to get init/or/cookie to bring up an assoc. Change so we don't just give a generic "comm lost" but look at actual states of dying assoc. - change "crc32" arguments to "crc32c" to silence strict/noisy compiler warnings when crc32() is also declared - A few minor tweaks to get the portable stuff truely portable for sctp6_usrreq.c :-D - one-2-one style vrf match problem. - window recovery would leave chks marked for retran during window probes on the sent queue. This would then cause an out-of-order problem and assure that the flight size "problem" would occur. - Solves a flight size logging issue that caused rwnd overruns, flight size off as well as false retransmissions.g - Macroize the up and down of flight size. - Fix a ECNE bug in its counting. - The strict_sacks options was causing aborts when window probing was active, fix to make strict sacks a bit smarter about what the next unsent TSN is. - Fixes a one-2-one wakeup bug found by Martin Kulas. - If-defed out form, Andre's copy routines pending his commit of at least m_last().. need to adjust for 6.2 as well.. since m_last won't exist. Reviewed by: gnn
2007-04-14 09:44:09 +00:00
(win_probe_recovered == 0) &&
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
(done_once == 0)) {
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
/*
* huh, this should not happen unless all packets are
* PR-SCTP and marked to skip of course.
*/
if (sctp_fs_audit(asoc)) {
TAILQ_FOREACH(net, &asoc->nets, sctp_next) {
net->flight_size = 0;
}
asoc->total_flight = 0;
asoc->total_flight_count = 0;
asoc->sent_queue_retran_cnt = 0;
TAILQ_FOREACH(tp1, &asoc->sent_queue, sctp_next) {
if (tp1->sent < SCTP_DATAGRAM_RESEND) {
sctp_flight_size_increase(tp1);
sctp_total_flight_increase(stcb, tp1);
} else if (tp1->sent == SCTP_DATAGRAM_RESEND) {
Use the proper increment macro when increasing the number on sent_queue_retran_cnt. MFC after: 1 week
2010-06-05 21:22:58 +00:00
sctp_ucount_incr(asoc->sent_queue_retran_cnt);
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
}
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
}
}
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
done_once = 1;
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
goto again;
}
Get rid of a lot of duplicated code for NR-SACK handle. Generalize the SACK to code handle also NR-SACKs.
2010-01-17 21:00:28 +00:00
/*********************************************/
/* Here we perform PR-SCTP procedures */
/* (section 4.2) */
/*********************************************/
/* C1. update advancedPeerAckPoint */
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(cum_ack, asoc->advanced_peer_ack_point)) {
- PR-SCTP bug, where the CUM-ACK was not being updated into the advance_peer_ack point so we would incorrectly send a wrong value in the FWD-TSN - PR-SCTP bug, where an PR packet is used for a window probe which could incorrectly get the packet moved back into the send_queue, which will cause major issues and should not happen. - Fix a trace to use the proper macro.
2009-03-04 20:54:42 +00:00
asoc->advanced_peer_ack_point = cum_ack;
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
/* C2. try to further move advancedPeerAckPoint ahead */
Add support for the SCTP_PR_SUPPORTED socket option as specified in http://tools.ietf.org/html/draft-ietf-tsvwg-sctp-prpolicies Add also a sysctl controlling the default of the end-points. MFC after: 1 week
2014-08-02 21:36:40 +00:00
if ((asoc->prsctp_supported) && (asoc->pr_sctp_cnt > 0)) {
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
struct sctp_tmit_chunk *lchk;
uint32_t old_adv_peer_ack_point;
old_adv_peer_ack_point = asoc->advanced_peer_ack_point;
lchk = sctp_try_advance_peer_ack_point(stcb, asoc);
/* C3. See if we need to send a Fwd-TSN */
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(asoc->advanced_peer_ack_point, cum_ack)) {
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
/*
More ECN fixes: 1) We now remove ECN-Nonce since it will no longer continue as a I-D 2) Eliminate last_tsn_echo, this tied us to an assoc not the net and thus we were not doing m-homing on the ECN-Echo senders side right. 3) Increment the count going out even if the TSN in lower in the pending ECN-Echo, this way the receiver knows exactly how many packets were marked even with network re-ordering 4) Fix so we DO NOT stop doing delayed sack if a ECN Echo is in queue MFC after: 1 month
2011-01-31 11:50:11 +00:00
* ISSUE with ECN, see FWD-TSN processing.
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
*/
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LOG_TRY_ADVANCE) {
sctp_misc_ints(SCTP_FWD_TSN_CHECK,
0xee, cum_ack, asoc->advanced_peer_ack_point,
old_adv_peer_ack_point);
}
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(asoc->advanced_peer_ack_point, old_adv_peer_ack_point)) {
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
send_forward_tsn(stcb, asoc);
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
} else if (lchk) {
/* try to FR fwd-tsn's that get lost too */
PR SCTP Bugs. Basically a full sized frame of PR SCTP FWD-TSN's would not be sent and thus cause a stalled connection. Also the rwnd Calculation was also off on the receiver side for PR-SCTP. MFC after: 1 month
2010-07-29 11:37:04 +00:00
if (lchk->rec.data.fwd_tsn_cnt >= 3) {
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
send_forward_tsn(stcb, asoc);
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
}
}
if (lchk) {
/* Assure a timer is up */
sctp_timer_start(SCTP_TIMER_TYPE_SEND,
stcb->sctp_ep, stcb, lchk->whoTo);
}
}
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_SACK_RWND_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_misc_ints(SCTP_SACK_RWND_UPDATE,
a_rwnd,
stcb->asoc.peers_rwnd,
stcb->asoc.total_flight,
stcb->asoc.total_output_queue_size);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
void
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
sctp_update_acked(struct sctp_tcb *stcb, struct sctp_shutdown_chunk *cp, int *abort_flag)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
/* Copy cum-ack */
uint32_t cum_ack, a_rwnd;
cum_ack = ntohl(cp->cumulative_tsn_ack);
/* Arrange so a_rwnd does NOT change */
a_rwnd = stcb->asoc.peers_rwnd + stcb->asoc.total_flight;
/* Now call the express sack handling */
1) Allow a chunk to track the cwnd it was at when sent. 2) Add separate max-bursts for retransmit and hb. These are set to sysctlable values but not settable via the socket api. This makes sure we don't blast out HB's or fast-retransmits. 3) Determine on the first data transmission on a net if its local-lan (by being under or over a RTT). This can later be used to think about different algorithms based on locallan vs big-i (experimental) 4) The cwnd should NOT be allowed to grow when an ECNEcho is seen (TCP has this same bug). We fix this in SCTP so an ECNe being seen prevents an advance of cwnd. 5) CWR's should not be sent multiple times to the same network, instead just updating the TSN being transmitted if needed. MFC after: 1 Month
2011-02-02 11:13:23 +00:00
sctp_express_handle_sack(stcb, cum_ack, a_rwnd, abort_flag, 0);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
static void
sctp_kick_prsctp_reorder_queue(struct sctp_tcb *stcb,
struct sctp_stream_in *strmin)
{
struct sctp_queued_to_read *ctl, *nctl;
struct sctp_association *asoc;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
uint32_t tt;
int need_reasm_check = 0, old;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc = &stcb->asoc;
tt = strmin->last_sequence_delivered;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (asoc->idata_supported) {
old = 0;
} else {
old = 1;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* First deliver anything prior to and including the stream no that
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* came in.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_FOREACH_SAFE(ctl, &strmin->inqueue, next_instrm, nctl) {
if (SCTP_MSGID_GE(old, tt, ctl->sinfo_ssn)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* this is deliverable now */
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (((ctl->sinfo_flags >> 8) & SCTP_DATA_NOT_FRAG) == SCTP_DATA_NOT_FRAG) {
if (ctl->on_strm_q) {
if (ctl->on_strm_q == SCTP_ON_ORDERED) {
TAILQ_REMOVE(&strmin->inqueue, ctl, next_instrm);
} else if (ctl->on_strm_q == SCTP_ON_UNORDERED) {
TAILQ_REMOVE(&strmin->uno_inqueue, ctl, next_instrm);
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#ifdef INVARIANTS
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
} else {
Cleanup debug output.
2016-04-18 06:58:07 +00:00
panic("strmin: %p ctl: %p unknown %d",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
strmin, ctl, ctl->on_strm_q);
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#endif
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
ctl->on_strm_q = 0;
}
/* subtract pending on streams */
asoc->size_on_all_streams -= ctl->length;
sctp_ucount_decr(asoc->cnt_on_all_streams);
/* deliver it to at least the delivery-q */
if (stcb->sctp_socket) {
sctp_mark_non_revokable(asoc, ctl->sinfo_tsn);
sctp_add_to_readq(stcb->sctp_ep, stcb,
ctl,
&stcb->sctp_socket->so_rcv,
1, SCTP_READ_LOCK_HELD,
SCTP_SO_NOT_LOCKED);
}
} else {
/* Its a fragmented message */
if (ctl->first_frag_seen) {
/*
* Make it so this is next to
* deliver, we restore later
*/
strmin->last_sequence_delivered = ctl->sinfo_ssn - 1;
need_reasm_check = 1;
break;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
} else {
/* no more delivery now. */
break;
}
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (need_reasm_check) {
int ret;
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
ret = sctp_deliver_reasm_check(stcb, &stcb->asoc, strmin, SCTP_READ_LOCK_HELD);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (SCTP_MSGID_GT(old, tt, strmin->last_sequence_delivered)) {
/* Restore the next to deliver unless we are ahead */
strmin->last_sequence_delivered = tt;
}
if (ret == 0) {
/* Left the front Partial one on */
return;
}
need_reasm_check = 0;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* now we must deliver things in queue the normal way if any are
* now ready.
*/
tt = strmin->last_sequence_delivered + 1;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_FOREACH_SAFE(ctl, &strmin->inqueue, next_instrm, nctl) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (tt == ctl->sinfo_ssn) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (((ctl->sinfo_flags >> 8) & SCTP_DATA_NOT_FRAG) == SCTP_DATA_NOT_FRAG) {
/* this is deliverable now */
if (ctl->on_strm_q) {
if (ctl->on_strm_q == SCTP_ON_ORDERED) {
TAILQ_REMOVE(&strmin->inqueue, ctl, next_instrm);
} else if (ctl->on_strm_q == SCTP_ON_UNORDERED) {
TAILQ_REMOVE(&strmin->uno_inqueue, ctl, next_instrm);
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#ifdef INVARIANTS
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
} else {
Cleanup debug output.
2016-04-18 06:58:07 +00:00
panic("strmin: %p ctl: %p unknown %d",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
strmin, ctl, ctl->on_strm_q);
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#endif
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
ctl->on_strm_q = 0;
}
/* subtract pending on streams */
asoc->size_on_all_streams -= ctl->length;
sctp_ucount_decr(asoc->cnt_on_all_streams);
/* deliver it to at least the delivery-q */
strmin->last_sequence_delivered = ctl->sinfo_ssn;
if (stcb->sctp_socket) {
sctp_mark_non_revokable(asoc, ctl->sinfo_tsn);
sctp_add_to_readq(stcb->sctp_ep, stcb,
ctl,
&stcb->sctp_socket->so_rcv, 1,
SCTP_READ_LOCK_HELD, SCTP_SO_NOT_LOCKED);
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
tt = strmin->last_sequence_delivered + 1;
} else {
/* Its a fragmented message */
if (ctl->first_frag_seen) {
/*
* Make it so this is next to
* deliver
*/
strmin->last_sequence_delivered = ctl->sinfo_ssn - 1;
need_reasm_check = 1;
break;
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
}
} else {
break;
}
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (need_reasm_check) {
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
(void)sctp_deliver_reasm_check(stcb, &stcb->asoc, strmin, SCTP_READ_LOCK_HELD);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
}
Fix the PR-SCTP behaviour. This is done by rrs@. MFC after: 3 days
2016-07-17 13:14:51 +00:00
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
static void
sctp_flush_reassm_for_str_seq(struct sctp_tcb *stcb,
struct sctp_association *asoc,
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
uint16_t stream, uint32_t seq, int ordered, int old, uint32_t cumtsn)
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
{
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
struct sctp_queued_to_read *control;
struct sctp_stream_in *strm;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
struct sctp_tmit_chunk *chk, *nchk;
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
int cnt_removed = 0;
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
/*
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
* For now large messages held on the stream reasm that are complete
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
* will be tossed too. We could in theory do more work to spin
* through and stop after dumping one msg aka seeing the start of a
* new msg at the head, and call the delivery function... to see if
* it can be delivered... But for now we just dump everything on the
* queue.
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
strm = &asoc->strmin[stream];
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
control = sctp_find_reasm_entry(strm, (uint32_t) seq, ordered, old);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (control == NULL) {
/* Not found */
return;
}
Fix the handling of unordered fragmented user messages using DATA chunks. There were two bugs: * There was an accounting bug resulting in reporting a too small a_rwnd. * There are a bug when abandoning messages in the reassembly queue. MFC after: 4 weeks
2016-09-21 08:28:18 +00:00
if (old && !ordered && SCTP_TSN_GT(control->fsn_included, cumtsn)) {
return;
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_FOREACH_SAFE(chk, &control->reasm, sctp_next, nchk) {
/* Purge hanging chunks */
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
if (old && (ordered == 0)) {
if (SCTP_TSN_GT(chk->rec.data.TSN_seq, cumtsn)) {
break;
}
}
cnt_removed++;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
TAILQ_REMOVE(&control->reasm, chk, sctp_next);
asoc->size_on_reasm_queue -= chk->send_size;
sctp_ucount_decr(asoc->cnt_on_reasm_queue);
if (chk->data) {
sctp_m_freem(chk->data);
chk->data = NULL;
Code cleanup: Use LIST_FOREACH, LIST_FOREACH_SAFE, TAILQ_FOREACH, TAILQ_FOREACH_SAFE where appropriate. No functional change. MFC after: 3 months.
2010-12-30 16:56:20 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
sctp_free_a_chunk(stcb, chk, SCTP_SO_NOT_LOCKED);
}
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
if (!TAILQ_EMPTY(&control->reasm)) {
/* This has to be old data, unordered */
if (control->data) {
sctp_m_freem(control->data);
control->data = NULL;
}
sctp_reset_a_control(control, stcb->sctp_ep, cumtsn);
chk = TAILQ_FIRST(&control->reasm);
if (chk->rec.data.rcv_flags & SCTP_DATA_FIRST_FRAG) {
TAILQ_REMOVE(&control->reasm, chk, sctp_next);
sctp_add_chk_to_control(control, strm, stcb, asoc,
chk, SCTP_READ_LOCK_HELD);
}
sctp_deliver_reasm_check(stcb, asoc, strm, SCTP_READ_LOCK_HELD);
return;
}
if (control->on_strm_q == SCTP_ON_ORDERED) {
TAILQ_REMOVE(&strm->inqueue, control, next_instrm);
control->on_strm_q = 0;
} else if (control->on_strm_q == SCTP_ON_UNORDERED) {
TAILQ_REMOVE(&strm->uno_inqueue, control, next_instrm);
control->on_strm_q = 0;
#ifdef INVARIANTS
} else if (control->on_strm_q) {
panic("strm: %p ctl: %p unknown %d",
strm, control, control->on_strm_q);
#endif
}
control->on_strm_q = 0;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (control->on_read_q == 0) {
sctp_free_remote_addr(control->whoFrom);
if (control->data) {
sctp_m_freem(control->data);
control->data = NULL;
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
sctp_free_a_readq(stcb, control);
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
}
}
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
void
sctp_handle_forward_tsn(struct sctp_tcb *stcb,
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
struct sctp_forward_tsn_chunk *fwd,
int *abort_flag, struct mbuf *m, int offset)
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
{
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* The pr-sctp fwd tsn */
/*
* here we will perform all the data receiver side steps for
* processing FwdTSN, as required in by pr-sctp draft:
*
* Assume we get FwdTSN(x):
*
* 1) update local cumTSN to x 2) try to further advance cumTSN to x +
* others we have 3) examine and update re-ordering queue on
* pr-in-streams 4) clean up re-assembly queue 5) Send a sack to
* report where we are.
*/
struct sctp_association *asoc;
This fixes PR-SCTP issues: - Slide the map at the proper place. - Mark the bits in the nr_array ONLY if there is no marking. - When generating a FWD-TSN we allow us to skip past ACKED chunks too. MFC after: 1 weeks
2010-05-12 13:45:46 +00:00
uint32_t new_cum_tsn, gap;
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
unsigned int i, fwd_sz, m_size;
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
uint32_t str_seq;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_stream_in *strm;
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
struct sctp_queued_to_read *ctl, *sv;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
asoc = &stcb->asoc;
if ((fwd_sz = ntohs(fwd->ch.chunk_length)) < sizeof(struct sctp_forward_tsn_chunk)) {
Two major items here: - All printf that was surrounded by #ifdef SCTP_DEBUG moves to a macro that does all of this. This removes all printfs from the code and makes the code more portable and easier to read. - Static Analysis (cisco) - found a few bugs, but mostly we add checks for NULL pointers and such to make the tool happy. We now pass the Cisco SA tools checks except for where it does not understand tailq/lists. We still need to look at the coverity tools output too (this is like the cisco SA tool) and see if it wants us to fix any other items. Hopefully this will be the last major churn in the code other than bug fixes.
2007-05-09 13:30:06 +00:00
SCTPDBG(SCTP_DEBUG_INDATA1,
"Bad size too small/big fwd-tsn\n");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
}
m_size = (stcb->asoc.mapping_array_size << 3);
/*************************************************************/
/* 1. Here we update local cumTSN and shift the bitmap array */
/*************************************************************/
new_cum_tsn = ntohl(fwd->new_cumulative_tsn);
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GE(asoc->cumulative_tsn, new_cum_tsn)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Already got there ... */
return;
}
/*
* now we know the new TSN is more advanced, let's find the actual
* gap
*/
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
SCTP_CALC_TSN_TO_GAP(gap, new_cum_tsn, asoc->mapping_array_base_tsn);
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
asoc->cumulative_tsn = new_cum_tsn;
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
if (gap >= m_size) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if ((long)gap > sctp_sbspace(&stcb->asoc, &stcb->sctp_socket->so_rcv)) {
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
struct mbuf *op_err;
char msg[SCTP_DIAG_INFO_LEN];
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* out of range (of single byte chunks in the rwnd I
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
* give out). This must be an attacker.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*/
- More macros for OS compatabilty - PR-SCTP would ignore FWD-TSN's above a rwnd's worth of TSN's (1 byte msgs).. this left the peer hopelessly out of sync.. or an attacker. So now we abort the assoc. - New IFN hash, also rename hashes to match addr/ifn now that the vrf has multiple. - Do not enable SCTP_PCB_FLAGS_RECVDATAIOEVNT per default as defined in the Socket API ID. - Export MTU information via sysctl. - Vrf's need table id's. This is default for BSD, but may be other things later when BSD fully supports VRFs. - Additional stream reset bug (caught by cisco dev-test). - Additional validations for the address in sending a message (socket api). -------- and ----- - Fix association notifications not to give the active open side false notifications. - Fix so sendfile and SENDALL will work properly (missing flag to say socket sender is done). - Fix Bug that prevented COOKIES from being retransmitted. - Break out connectx into helper sub-models so that iox routines can reuse the helpers. - When an address is added during system init (non-dynamic mode) make sure that the "defer use" flag is not set. ** its compiling on XR now :-D ** Reviewed by: gnn
2007-05-08 00:21:05 +00:00
*abort_flag = 1;
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
snprintf(msg, sizeof(msg),
"New cum ack %8.8x too high, highest TSN %8.8x",
new_cum_tsn, asoc->highest_tsn_inside_map);
op_err = sctp_generate_cause(SCTP_CAUSE_PROTOCOL_VIOLATION, msg);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
stcb->sctp_ep->last_abort_code = SCTP_FROM_SCTP_INDATA + SCTP_LOC_33;
* Provide information in error causes in ASCII instead of proprietary binary format. * Add support for a diagnostic information error cause. The code is sysctlable and the default is 0, which means it is not sent. This is joint work with rrs@. MFC after: 1 week
2014-03-16 12:32:16 +00:00
sctp_abort_an_association(stcb->sctp_ep, stcb, op_err, SCTP_SO_NOT_LOCKED);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
}
- Fixes so we won't try to start a timer when we hold a wq lock for the iterator. Panda uses a silly recursive lock they hold through the timer. - Add poor mans wireshark compile option.. - Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls. - sysctl now will get back the refcnt for viewing by onlookers. Reviewed by: gnn
2007-05-29 09:29:03 +00:00
SCTP_STAT_INCR(sctps_fwdtsn_map_over);
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
memset(stcb->asoc.mapping_array, 0, stcb->asoc.mapping_array_size);
asoc->mapping_array_base_tsn = new_cum_tsn + 1;
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
asoc->highest_tsn_inside_map = new_cum_tsn;
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
memset(stcb->asoc.nr_mapping_array, 0, stcb->asoc.mapping_array_size);
Fix for NR-Sack code. The code was NOT working properly when enabled. Basically most of the operations were incorrect causing bad sacks when you enabled nr-sack. The fixes range across 4 files and unifiy most of the processing so that we only test nr_sack flags to decide which type of sack to generate. Optimization left for this is to combine the sack generation code and make it capable of generating either sack thus shrinking out a routine. Reviewed by: tuexen@freebsd.org
2010-03-24 19:45:36 +00:00
asoc->highest_tsn_inside_nr_map = new_cum_tsn;
- Macro-izes the packed declaration in all headers. - Vimage prep - these are major restructures to move all global variables to be accessed via a macro or two. The variables all go into a single structure. - Asconf address addition tweaks (add_or_del Interfaces) - Fix rwnd calcualtion to be more conservative. - Support SACK_IMMEDIATE flag to skip delayed sack by demand of peer. - Comment updates in the sack mapping calculations - Invarients panic added. - Pre-support for UDP tunneling (we can do this on MAC but will need added support from UDP to get a "pipe" of UDP packets in. - clear trace buffer sysctl added when local tracing on. Note the majority of this huge patch is all the vimage prep stuff :-)
2008-06-14 07:58:05 +00:00
if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_MAP_LOGGING_ENABLE) {
- Fix so ifn's are properly deleted when the ref count goes to 0. - Fix so VRF's will clean themselves up when no references are around. - Allow sctp_ifa to be passed into inpcb_bind, addr_mgmt_ep_sa to bypass normal validation checks. - turn auto-asconf off for subset bound sockets - Moves all logging to use KTR. This gets rid of most of the logging #ifdef's with a few exceptions reducing the number of config options for SCTP.
2007-06-14 22:59:04 +00:00
sctp_log_map(0, 3, asoc->highest_tsn_inside_map, SCTP_MAP_SLIDE_RESULT);
}
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
} else {
SCTP_TCB_LOCK_ASSERT(stcb);
Fixes several PR-SCTP releated bugs. - When sending large PR-SCTP messages over a lossy link we would incorrectly calculate the fwd-tsn - When receiving large multipart pr-sctp packets we would incorrectly send back a SACK that would renege improperly on already received packets thus causing unneeded retransmissions.
2009-03-14 13:42:13 +00:00
for (i = 0; i <= gap; i++) {
This fixes PR-SCTP issues: - Slide the map at the proper place. - Mark the bits in the nr_array ONLY if there is no marking. - When generating a FWD-TSN we allow us to skip past ACKED chunks too. MFC after: 1 weeks
2010-05-12 13:45:46 +00:00
if (!SCTP_IS_TSN_PRESENT(asoc->mapping_array, i) &&
!SCTP_IS_TSN_PRESENT(asoc->nr_mapping_array, i)) {
SCTP_SET_TSN_PRESENT(asoc->nr_mapping_array, i);
Define and use SCTP_SSN_GE, SCTP_SSN_GT, SCTP_TSN_GE, SCTP_TSN_GT macros and use them instead of the generic compare_with_wrap. Retire compare_with_wrap. MFC after: 3 months.
2010-12-30 21:32:35 +00:00
if (SCTP_TSN_GT(asoc->mapping_array_base_tsn + i, asoc->highest_tsn_inside_nr_map)) {
This fixes PR-SCTP issues: - Slide the map at the proper place. - Mark the bits in the nr_array ONLY if there is no marking. - When generating a FWD-TSN we allow us to skip past ACKED chunks too. MFC after: 1 weeks
2010-05-12 13:45:46 +00:00
asoc->highest_tsn_inside_nr_map = asoc->mapping_array_base_tsn + i;
* Fix some race condition in SACK/NR-SACK processing. * Fix handling of mapping arrays when draining mbufs or processing FORWARD-TSN chunks. * Cleanup code (no duplicate code anymore for SACKs and NR-SACKs). Part of this code was developed together with rrs. MFC after: 2 weeks.
2010-04-03 15:40:14 +00:00
}
}
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/*************************************************************/
/* 2. Clear up re-assembly queue */
/*************************************************************/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
/* This is now done as part of clearing up the stream/seq */
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
if (asoc->idata_supported == 0) {
uint16_t sid;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
/* Flush all the un-ordered data based on cum-tsn */
SCTP_INP_READ_LOCK(stcb->sctp_ep);
for (sid = 0; sid < asoc->streamincnt; sid++) {
sctp_flush_reassm_for_str_seq(stcb, asoc, sid, 0, 0, 1, new_cum_tsn);
}
SCTP_INP_READ_UNLOCK(stcb->sctp_ep);
}
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
/*******************************************************/
/* 3. Update the PR-stream re-ordering queues and fix */
/* delivery issues as needed. */
/*******************************************************/
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
fwd_sz -= sizeof(*fwd);
- Fix stream reset so it limits the number of streams that can be listed - Fix fwd-tsn to use proper accessor so it does not overrun mbufs - Fix stream reset error reporting to actually work (it has always been broken if the peer rejects a stream reset) - Some 64 bit friendly changes Approved by: re(bmah@freebsd.org)
2007-06-22 13:50:56 +00:00
if (m && fwd_sz) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* New method. */
- fixed autclose to not allow setting on 1-2-1 model. - bounded cookie-life to 1 second minimum in socket option set. - Delayed_ack_time becomes delayed_ack per new socket api document. - Improve port number selection, we now use low/high bounds and no chance of a endless loop. Only one call to random per bind as well. - fixes so set_peer_primary pre-screens addresses to be valid to this host. - maxseg did not allow setting on an assoc basis. We needed to thus track and use an association value instead of a inp value. - Fixed ep get of HB status to report back properly. - use settings flag to tell if assoc level hb is on off not the timer.. since the timer may still run if unconf address are present. - check for crazy ENABLE/DISABLE conditions. - set and get of pmtud (fixed path mtu) not always taking into account ovh. - Getting PMTU info on stcb only needs to return PMTUD_ENABLED if any net is doing PMTU discovery. - Panic or warning fixed to not do so when a valid ip frag is taking place. - sndrcvinfo appearing in both inp and stcb was full size, instead of the non-pad version. This saves about 92 bytes from each struct by carefully converting to use the smaller version. - one-2-one model get(maxseg) would always get ep value, never the tcb's value. - The delayed ack time could be under a tick, this fixes so it bounds it to at least 1 tick for platforms whos tick is more than a ms. - Fragment interleave level set to wrong default value. - Fragment interleave could not set level 0. - Defered stream reset was broken due to a guard check and ntohl issue. - Found two lock order reversals and fixed. - Tighten up address checking, if the user gives an address the sa_len had better be set properly. - Get asoc by assoc-id would return a locked tcb when it was asked not to if the tcb was in the restart hash. - sysctl to dig down and get more association details Reviewed by: gnn
2007-05-28 11:17:24 +00:00
unsigned int num_str;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
uint32_t sequence;
uint16_t stream;
Fix the PR-SCTP behaviour. This is done by rrs@. MFC after: 3 days
2016-07-17 13:14:51 +00:00
uint16_t ordered, flags;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
int old;
- Fix stream reset so it limits the number of streams that can be listed - Fix fwd-tsn to use proper accessor so it does not overrun mbufs - Fix stream reset error reporting to actually work (it has always been broken if the peer rejects a stream reset) - Some 64 bit friendly changes Approved by: re(bmah@freebsd.org)
2007-06-22 13:50:56 +00:00
struct sctp_strseq *stseq, strseqbuf;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
struct sctp_strseq_mid *stseq_m, strseqbuf_m;
- Fix stream reset so it limits the number of streams that can be listed - Fix fwd-tsn to use proper accessor so it does not overrun mbufs - Fix stream reset error reporting to actually work (it has always been broken if the peer rejects a stream reset) - Some 64 bit friendly changes Approved by: re(bmah@freebsd.org)
2007-06-22 13:50:56 +00:00
offset += sizeof(*fwd);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
SCTP_INP_READ_LOCK(stcb->sctp_ep);
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (asoc->idata_supported) {
num_str = fwd_sz / sizeof(struct sctp_strseq_mid);
old = 0;
} else {
num_str = fwd_sz / sizeof(struct sctp_strseq);
old = 1;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
for (i = 0; i < num_str; i++) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (asoc->idata_supported) {
stseq_m = (struct sctp_strseq_mid *)sctp_m_getptr(m, offset,
sizeof(struct sctp_strseq_mid),
(uint8_t *) & strseqbuf_m);
offset += sizeof(struct sctp_strseq_mid);
if (stseq_m == NULL) {
break;
}
stream = ntohs(stseq_m->stream);
sequence = ntohl(stseq_m->msg_id);
Fix the PR-SCTP behaviour. This is done by rrs@. MFC after: 3 days
2016-07-17 13:14:51 +00:00
flags = ntohs(stseq_m->flags);
if (flags & PR_SCTP_UNORDERED_FLAG) {
ordered = 0;
} else {
ordered = 1;
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
} else {
stseq = (struct sctp_strseq *)sctp_m_getptr(m, offset,
sizeof(struct sctp_strseq),
(uint8_t *) & strseqbuf);
offset += sizeof(struct sctp_strseq);
if (stseq == NULL) {
break;
}
stream = ntohs(stseq->stream);
sequence = (uint32_t) ntohs(stseq->sequence);
Fix the PR-SCTP behaviour. This is done by rrs@. MFC after: 3 days
2016-07-17 13:14:51 +00:00
ordered = 1;
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Convert */
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* now process */
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
/*
* Ok we now look for the stream/seq on the read
* queue where its not all delivered. If we find it
* we transmute the read entry into a PDI_ABORTED.
*/
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (stream >= asoc->streamincnt) {
- During shutdown pending, when the last sack came in and the last message on the send stream was "null" but still there, a state we allow, we could get hung and not clean it up and wait for the shutdown guard timer to clear the association without a graceful close. Fix this so that that we properly clean up. - Added support for Multiple ASCONF per new RFC. We only (so far) accept input of these and cannot yet generate a multi-asconf. - Sysctl'd support for experimental Fast Handover feature. Always disabled unless sysctl or socket option changes to enable. - Error case in add-ip where the peer supports AUTH and ADD-IP but does NOT require AUTH of ASCONF/ASCONF-ACK. We need to ABORT in this case. - According to the Kyoto summit of socket api developers (Solaris, Linux, BSD). We need to have: o non-eeor mode messages be atomic - Fixed o Allow implicit setup of an assoc in 1-2-1 model if using the sctp_**() send calls - Fixed o Get rid of HAVE_XXX declarations - Done o add a sctp_pr_policy in hole in sndrcvinfo structure - Done o add a PR_SCTP_POLICY_VALID type flag - yet to-do in a future patch! - Optimize sctp6 calls to reuse code in sctp_usrreq. Also optimize when we close sending out the data and disabling Nagle. - Change key concatenation order to match the auth RFC - When sending OOTB shutdown_complete always do csum. - Don't send PKT-DROP to a PKT-DROP - For abort chunks just always checksums same for shutdown-complete. - inpcb_free front state had a bug where in queue data could wedge an assoc. We need to just abandon ones in front states (free_assoc). - If a peer sends us a 64k abort, we would try to assemble a response packet which may be larger than 64k. This then would be dropped by IP. Instead make a "minimum" size for us 64k-2k (we want at least 2k for our initack). If we receive such an init discard it early without all the processing. - When we peel off we must increment the tcb ref count to keep it from being freed from underneath us. - handling fwd-tsn had bugs that caused memory overwrites when given faulty data, fixed so can't happen and we also stop at the first bad stream no. - Fixed so comm-up generates the adaption indication. - peeloff did not get the hmac params copied. - fix it so we lock the addr list when doing src-addr selection (in future we need to use a multi-reader/one writer lock here) - During lowlevel output, we could end up with a _l_addr set to null if the iterator is calling the output routine. This means we would possibly crash when we gather the MTU info. Fix so we only do the gather where we have a src address cached. - we need to be sure to set abort flag on conn state when we receive an abort. - peeloff could leak a socket. Moved code so the close will find the socket if the peeloff fails (uipc_syscalls.c) Approved by: re@freebsd.org(Ken Smith)
2007-08-27 05:19:48 +00:00
/* screwed up streams, stop! */
break;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if ((asoc->str_of_pdapi == stream) &&
(asoc->ssn_of_pdapi == sequence)) {
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
/*
* If this is the one we were partially
* delivering now then we no longer are.
* Note this will change with the reassembly
* re-write.
*/
asoc->fragmented_delivery_inprogress = 0;
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
strm = &asoc->strmin[stream];
Fix various bugs in relation to the I-DATA chunk support This is joint work with rrs. MFC after: 3 days
2016-08-06 12:33:15 +00:00
if (asoc->idata_supported == 0) {
uint16_t strm_at;
for (strm_at = strm->last_sequence_delivered; SCTP_MSGID_GE(1, sequence, strm_at); strm_at++) {
sctp_flush_reassm_for_str_seq(stcb, asoc, stream, strm_at, ordered, old, new_cum_tsn);
}
} else {
uint32_t strm_at;
for (strm_at = strm->last_sequence_delivered; SCTP_MSGID_GE(0, sequence, strm_at); strm_at++) {
sctp_flush_reassm_for_str_seq(stcb, asoc, stream, strm_at, ordered, old, new_cum_tsn);
}
}
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
TAILQ_FOREACH(ctl, &stcb->sctp_ep->read_queue, next) {
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if ((ctl->sinfo_stream == stream) &&
(ctl->sinfo_ssn == sequence)) {
str_seq = (stream << 16) | (0x0000ffff & sequence);
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
ctl->pdapi_aborted = 1;
sv = stcb->asoc.control_pdapi;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
ctl->end_added = 1;
if (ctl->on_strm_q == SCTP_ON_ORDERED) {
TAILQ_REMOVE(&strm->inqueue, ctl, next_instrm);
} else if (ctl->on_strm_q == SCTP_ON_UNORDERED) {
TAILQ_REMOVE(&strm->uno_inqueue, ctl, next_instrm);
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#ifdef INVARIANTS
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
} else if (ctl->on_strm_q) {
Cleanup debug output.
2016-04-18 06:58:07 +00:00
panic("strm: %p ctl: %p unknown %d",
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
strm, ctl, ctl->on_strm_q);
Put panic() calls under INVARIANTS.
2016-04-18 09:29:14 +00:00
#endif
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
}
ctl->on_strm_q = 0;
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
stcb->asoc.control_pdapi = ctl;
* Fix a bug where PR-SCTP settings are ignore when using implicit association setup. * Fix a bug where message with illegal stream ids are not deleted. * Fix a crash when reporting back unsent messages from the send_queue. * Fix a bug related to INIT retransmission when the socket is already closed. * Fix a bug where associations were stalled when partial delivery API was enabled. * Fix a bug where the receive buffer size was smaller than the partial_delivery_point. Approved by: re, rrs (mentor) MFC after: One day.
2009-08-15 21:10:52 +00:00
sctp_ulp_notify(SCTP_NOTIFY_PARTIAL_DELVIERY_INDICATION,
stcb,
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
SCTP_PARTIAL_DELIVERY_ABORTED,
* Fix a bug where PR-SCTP settings are ignore when using implicit association setup. * Fix a bug where message with illegal stream ids are not deleted. * Fix a crash when reporting back unsent messages from the send_queue. * Fix a bug related to INIT retransmission when the socket is already closed. * Fix a bug where associations were stalled when partial delivery API was enabled. * Fix a bug where the receive buffer size was smaller than the partial_delivery_point. Approved by: re, rrs (mentor) MFC after: One day.
2009-08-15 21:10:52 +00:00
(void *)&str_seq,
SCTP_SO_NOT_LOCKED);
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
stcb->asoc.control_pdapi = sv;
break;
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
} else if ((ctl->sinfo_stream == stream) &&
SCTP_MSGID_GT(old, ctl->sinfo_ssn, sequence)) {
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
/* We are past our victim SSN */
break;
}
}
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
if (SCTP_MSGID_GT(old, sequence, strm->last_sequence_delivered)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Update the sequence number */
This is work done by Michael Tuexen and myself at the IETF. This adds the new I-Data (Interleaved Data) message. This allows a user to be able to have complete freedom from Head Of Line blocking that was previously there due to the in-ability to send multiple large messages without the TSN's being in sequence. The code as been tested with Michaels various packet drill scripts as well as inter-networking between the IETF's location in Argentina and Germany.
2016-04-07 09:10:34 +00:00
strm->last_sequence_delivered = sequence;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* now kick the stream the new way */
- Incorrect error EAGAIN returned for invalid send on a locked stream (using EEOR mode). Changed to EINVAL (in sctp_output.c) - Static analysis comments added - fix in mobility code to return a value (static analysis found). - sctp6_notify function made visible instead of static (this is needed for Panda). Approved by: re@freebsd.org (B Mah)
2007-09-13 10:36:43 +00:00
/* sa_ignore NO_NULL_CHK */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_kick_prsctp_reorder_queue(stcb, strm);
}
Many bug fixes (from the IETF hack-fest): - PR-SCTP had major issues when skipping through a multi-part message. o Did not look at socket buffer. o Did not properly handle the reassmebly queue. o The MARKED segments could interfere and un-skip a chunk causing a problem with the proper FWD-TSN. o No FR of FWD-TSN's was being done. - NR-Sack code was basically disabled. It needed fixes that never got into the real code. - CMT code had issues when the two paths were NOT the same b/w. We found a few small bugs, but also the critcal one here was not dividing the rwnd amongst the paths. Obtained from: Michael Tuexen and myself at the IETF hack-fest ;-)
2009-04-04 11:43:32 +00:00
SCTP_INP_READ_UNLOCK(stcb->sctp_ep);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
This fixes PR-SCTP issues: - Slide the map at the proper place. - Mark the bits in the nr_array ONLY if there is no marking. - When generating a FWD-TSN we allow us to skip past ACKED chunks too. MFC after: 1 weeks
2010-05-12 13:45:46 +00:00
/*
* Now slide thing forward.
*/
sctp_slide_mapping_arrays(stcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
Reference in New Issue Copy Permalink