d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a10502a58b
freebsd-skq/usr.sbin/cpucontrol/cpucontrol.8

174 lines
4.3 KiB
Groff
Raw Normal View History

- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.\" Copyright (c) 2006, 2008 Stanislav Sedov <stas@FreeBSD.org>.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
- Add support to atomically set/clear individual bits of a MSR register via cpuctl(4) driver. Two new CPUCTL_MSRSBIT and CPUCTL_MSRCBIT ioctl(2) calls treat the data field of the argument struct passed as a mask and set/clear bits of the MSR register according to the mask value. - Allow user to perform atomic bitwise AND and OR operaions on MSR registers via cpucontrol(8) utility. Two new operations ("&=" and "|=") have been added. The first one applies bitwise AND operaion between the current contents of the MSR register and the mask, and the second performs bitwise OR. The argument can be optionally prefixed with "~" inversion operator. This allows one to mimic the "clear bit" behavior by using the command like this: cpucontrol -m 0x10&=~0x02 # clear the second bit of TSC MSR Inversion operator support in all modes (assignment, OR, AND). Approved by: re (kib) MFC after: 1 month
2009-06-30 12:35:47 +00:00
.Dd June 30, 2009
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.Dt CPUCONTROL 8
.Os
.Sh NAME
.Nm cpucontrol
.Nd control utility for the
.Xr cpuctl 4
device.
.Sh SYNOPSIS
.Nm
.Op Fl vh
- Add support to atomically set/clear individual bits of a MSR register via cpuctl(4) driver. Two new CPUCTL_MSRSBIT and CPUCTL_MSRCBIT ioctl(2) calls treat the data field of the argument struct passed as a mask and set/clear bits of the MSR register according to the mask value. - Allow user to perform atomic bitwise AND and OR operaions on MSR registers via cpucontrol(8) utility. Two new operations ("&=" and "|=") have been added. The first one applies bitwise AND operaion between the current contents of the MSR register and the mask, and the second performs bitwise OR. The argument can be optionally prefixed with "~" inversion operator. This allows one to mimic the "clear bit" behavior by using the command like this: cpucontrol -m 0x10&=~0x02 # clear the second bit of TSC MSR Inversion operator support in all modes (assignment, OR, AND). Approved by: re (kib) MFC after: 1 month
2009-06-30 12:35:47 +00:00
.Fl m Ar msr
.Bk
.Ar device
.Ek
.Nm
.Op Fl vh
.Fl m Ar msr Ns = Ns Ar value
.Bk
.Ar device
.Ek
.Nm
.Op Fl vh
.Fl m Ar msr Ns &= Ns Ar mask
.Bk
.Ar device
.Ek
.Nm
.Op Fl vh
.Fl m Ar msr Ns |= Ns Ar mask
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.Bk
.Ar device
.Ek
.Nm
.Op Fl vh
.Fl i Ar level
.Bk
.Ar device
.Ek
.Nm
.Op Fl vh
.Op Fl d Ar datadir
.Fl u
.Bk
.Ar device
.Ek
.Sh DESCRIPTION
The
.Nm
Mdoc and wording improvements.
2008-12-30 20:16:33 +00:00
utility can be used to read and write arbitrary machine-specific
CPU registers via the
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.Xr cpuctl 4
Mdoc and wording improvements.
2008-12-30 20:16:33 +00:00
special device.
It can also be used to apply CPU firmware updates.
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.Pp
The following options are available:
.Bl -tag -width indent
.It Fl d Ar datadir
Mdoc and wording improvements.
2008-12-30 20:16:33 +00:00
Where to look for microcode images.
The option can be specified multiple times.
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.It Fl m Ar msr Ns Op = Ns Ar value
- Add support to atomically set/clear individual bits of a MSR register via cpuctl(4) driver. Two new CPUCTL_MSRSBIT and CPUCTL_MSRCBIT ioctl(2) calls treat the data field of the argument struct passed as a mask and set/clear bits of the MSR register according to the mask value. - Allow user to perform atomic bitwise AND and OR operaions on MSR registers via cpucontrol(8) utility. Two new operations ("&=" and "|=") have been added. The first one applies bitwise AND operaion between the current contents of the MSR register and the mask, and the second performs bitwise OR. The argument can be optionally prefixed with "~" inversion operator. This allows one to mimic the "clear bit" behavior by using the command like this: cpucontrol -m 0x10&=~0x02 # clear the second bit of TSC MSR Inversion operator support in all modes (assignment, OR, AND). Approved by: re (kib) MFC after: 1 month
2009-06-30 12:35:47 +00:00
Show value of the specified MSR.
MSR register number should be given as a hexadecimal number.
.It Fl m Ar msr Ns = Ns Ar value
Store the
.Ar value
in the specified MSR register.
The
.Ar value
argument can be prefixed with ~ operator.
In this case the inverted value of argument will be stored in the register.
.It Fl m Ar msr Ns &= Ns Ar mask
Store the result of bitwise AND operation between
.Ar mask
and the current MSR value in the MSR register.
The
.Ar mask
argument can be prefixed with ~ operator.
In this case the inverted value of mask will be used.
.It Fl m Ar msr Ns |= Ns Ar mask
Store the result of bitwise OR operation between
.Ar mask
and the current MSR value in the MSR register.
The
.Ar mask
argument can be prefixed with ~ operator.
In this case the inverted value of mask will be used.
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.It Fl i Ar level
Mdoc and wording improvements.
2008-12-30 20:16:33 +00:00
Retrieve CPUID info.
Level should be given as a hex number.
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.It Fl u
Mdoc and wording improvements.
2008-12-30 20:16:33 +00:00
Apply CPU firmware updates.
The
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.Nm
utility will walk through the configured data directories
- Improve wording. Approved by: kib (mentor) MFC after: 1 week
2009-01-04 15:49:30 +00:00
and apply all firmware updates available for this CPU.
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.It Fl v
Increase the verbosity level.
.It Fl h
Show help message.
.El
.Sh EXIT STATUS
- use .Ex macro in EXIT STATUS section
2009-01-07 01:31:09 +00:00
.Ex -std
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.Sh EXAMPLES
The command
.Pp
.Dq Li "cpucontrol -m 0x10 /dev/cpuctl0"
.Pp
will read the contents of TSC MSR from CPU 0.
.Pp
To set the CPU 0 TSC MSR register value to 0x1 issue
.Pp
- Add support to atomically set/clear individual bits of a MSR register via cpuctl(4) driver. Two new CPUCTL_MSRSBIT and CPUCTL_MSRCBIT ioctl(2) calls treat the data field of the argument struct passed as a mask and set/clear bits of the MSR register according to the mask value. - Allow user to perform atomic bitwise AND and OR operaions on MSR registers via cpucontrol(8) utility. Two new operations ("&=" and "|=") have been added. The first one applies bitwise AND operaion between the current contents of the MSR register and the mask, and the second performs bitwise OR. The argument can be optionally prefixed with "~" inversion operator. This allows one to mimic the "clear bit" behavior by using the command like this: cpucontrol -m 0x10&=~0x02 # clear the second bit of TSC MSR Inversion operator support in all modes (assignment, OR, AND). Approved by: re (kib) MFC after: 1 month
2009-06-30 12:35:47 +00:00
.Dq Li "cpucontrol -m 0x10=0x1 /dev/cpuctl0" .
.Pp
The following command will clear the second bit of TSC register:
.Pp
.Dq Li "cpucontrol -m 0x10&=~0x02 /dev/cpuctl0" .
.Pp
The following command will set the forth and second bit of TSC register:
.Pp
.Dq Li "cpucontrol -m 0x10|=0x0a /dev/cpuctl0" .
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.Pp
The command
.Pp
.Dq Li "cpucontrol -i 0x1 /dev/cpuctl1"
.Pp
will retrieve the CPUID level 0x1 from CPU 1.
.Pp
Mdoc and wording improvements.
2008-12-30 20:16:33 +00:00
To perform firmware updates on CPU 0 from images located at
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.Pa /usr/local/share/cpuctl/
use the following command:
.Pp
.Dq Li "cpucontrol -d /usr/local/share/cpuctl/ -u /dev/cpuctl0"
.Sh SEE ALSO
.Xr cpuctl 4
- Improve wording. Approved by: kib (mentor) MFC after: 1 week
2009-01-04 15:49:30 +00:00
.Sh HISTORY
The
.Nm
utility first appeared in
Correct the information about when the respective functionality first appeared in FreeBSD. PR: 133785 Submitted by: Ulrich Spoerlein <uqs@spoerlein.net> MFC after: 3 days
2009-04-23 08:37:56 +00:00
.Fx 7.2 .
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
.Sh AUTHORS
The
.Nm
utility and this manual page was written by
.An Stanislav Sedov Aq stas@FreeBSD.org .
mdoc: move CAVEATS, BUGS and SECURITY CONSIDERATIONS sections to the bottom of the manpages and order them consistently. GNU groff doesn't care about the ordering, and doesn't even mention CAVEATS and SECURITY CONSIDERATIONS as common sections and where to put them. Found by: mdocml lint run Reviewed by: ru
2010-05-13 12:07:55 +00:00
.Sh BUGS
Yes, probably, report if any.
Reference in New Issue Copy Permalink