freebsd-skq/sbin/iscontrol/fsm.c

758 lines
19 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2005-2010 Daniel Braniss <danny@cs.huji.ac.il>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/*
| $Id: fsm.c,v 2.8 2007/05/19 16:34:21 danny Exp danny $
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <sys/sysctl.h>
#include <netinet/in.h>
#include <netinet/tcp.h>
#include <arpa/inet.h>
#include <sys/ioctl.h>
#include <netdb.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <fcntl.h>
#include <time.h>
#include <syslog.h>
#include <stdarg.h>
#include <camlib.h>
#include <dev/iscsi_initiator/iscsi.h>
#include "iscontrol.h"
typedef enum {
T1 = 1,
T2, /*T3,*/ T4, T5, /*T6,*/ T7, T8, T9,
T10, T11, T12, T13, T14, T15, T16, T18
} trans_t;
/*
| now supports IPV6
| thanks to:
| Hajimu UMEMOTO @ Internet Mutual Aid Society Yokohama, Japan
| ume@mahoroba.org ume@{,jp.}FreeBSD.org
| http://www.imasy.org/~ume/
*/
static trans_t
tcpConnect(isess_t *sess)
{
isc_opt_t *op = sess->op;
int val, sv_errno, soc;
struct addrinfo *res, *res0, hints;
char pbuf[10];
debug_called(3);
if(sess->flags & (SESS_RECONNECT|SESS_REDIRECT)) {
syslog(LOG_INFO, "%s", (sess->flags & SESS_RECONNECT)
? "Reconnect": "Redirected");
debug(1, "%s", (sess->flags & SESS_RECONNECT) ? "Reconnect": "Redirected");
shutdown(sess->soc, SHUT_RDWR);
//close(sess->soc);
sess->soc = -1;
sess->flags &= ~SESS_CONNECTED;
if(sess->flags & SESS_REDIRECT) {
sess->redirect_cnt++;
sess->flags |= SESS_RECONNECT;
} else
sleep(2); // XXX: actually should be ?
#ifdef notyet
{
time_t sec;
// make sure we are not in a loop
// XXX: this code has to be tested
sec = time(0) - sess->reconnect_time;
if(sec > (5*60)) {
// if we've been connected for more that 5 minutes
// then just reconnect
sess->reconnect_time = sec;
sess->reconnect_cnt1 = 0;
}
else {
//
sess->reconnect_cnt1++;
if((sec / sess->reconnect_cnt1) < 2) {
// if less that 2 seconds from the last reconnect
// we are most probably looping
syslog(LOG_CRIT, "too many reconnects %d", sess->reconnect_cnt1);
return 0;
}
}
}
#endif
sess->reconnect_cnt++;
}
snprintf(pbuf, sizeof(pbuf), "%d", op->port);
memset(&hints, 0, sizeof(hints));
hints.ai_family = PF_UNSPEC;
hints.ai_socktype = SOCK_STREAM;
debug(1, "targetAddress=%s port=%d", op->targetAddress, op->port);
if((val = getaddrinfo(op->targetAddress, pbuf, &hints, &res0)) != 0) {
fprintf(stderr, "getaddrinfo(%s): %s\n", op->targetAddress, gai_strerror(val));
return 0;
}
sess->flags &= ~SESS_CONNECTED;
sv_errno = 0;
soc = -1;
for(res = res0; res; res = res->ai_next) {
soc = socket(res->ai_family, res->ai_socktype, res->ai_protocol);
if (soc == -1)
continue;
// from Patrick.Guelat@imp.ch:
// iscontrol can be called without waiting for the socket entry to time out
val = 1;
if(setsockopt(soc, SOL_SOCKET, SO_REUSEADDR, &val, (socklen_t)sizeof(val)) < 0) {
fprintf(stderr, "Cannot set socket SO_REUSEADDR %d: %s\n\n",
errno, strerror(errno));
}
if(connect(soc, res->ai_addr, res->ai_addrlen) == 0)
break;
sv_errno = errno;
close(soc);
soc = -1;
}
freeaddrinfo(res0);
if(soc != -1) {
sess->soc = soc;
#if 0
struct timeval timeout;
val = 1;
if(setsockopt(sess->soc, IPPROTO_TCP, TCP_KEEPALIVE, &val, sizeof(val)) < 0)
fprintf(stderr, "Cannot set socket KEEPALIVE option err=%d %s\n",
errno, strerror(errno));
if(setsockopt(sess->soc, IPPROTO_TCP, TCP_NODELAY, &val, sizeof(val)) < 0)
fprintf(stderr, "Cannot set socket NO delay option err=%d %s\n",
errno, strerror(errno));
timeout.tv_sec = 10;
timeout.tv_usec = 0;
if((setsockopt(sess->soc, SOL_SOCKET, SO_SNDTIMEO, &timeout, sizeof(timeout)) < 0)
|| (setsockopt(sess->soc, SOL_SOCKET, SO_RCVTIMEO, &timeout, sizeof(timeout)) < 0)) {
fprintf(stderr, "Cannot set socket timeout to %ld err=%d %s\n",
timeout.tv_sec, errno, strerror(errno));
}
#endif
#ifdef CURIOUS
{
int len = sizeof(val);
if(getsockopt(sess->soc, SOL_SOCKET, SO_SNDBUF, &val, &len) == 0)
fprintf(stderr, "was: SO_SNDBUF=%dK\n", val/1024);
}
#endif
if(sess->op->sockbufsize) {
val = sess->op->sockbufsize * 1024;
if((setsockopt(sess->soc, SOL_SOCKET, SO_SNDBUF, &val, sizeof(val)) < 0)
|| (setsockopt(sess->soc, SOL_SOCKET, SO_RCVBUF, &val, sizeof(val)) < 0)) {
fprintf(stderr, "Cannot set socket sndbuf & rcvbuf to %d err=%d %s\n",
val, errno, strerror(errno));
return 0;
}
}
sess->flags |= SESS_CONNECTED;
return T1;
}
fprintf(stderr, "errno=%d\n", sv_errno);
perror("connect");
switch(sv_errno) {
case ECONNREFUSED:
case EHOSTUNREACH:
case ENETUNREACH:
case ETIMEDOUT:
if((sess->flags & SESS_REDIRECT) == 0) {
if(strcmp(op->targetAddress, sess->target.address) != 0) {
syslog(LOG_INFO, "reconnecting to original target address");
free(op->targetAddress);
op->targetAddress = sess->target.address;
op->port = sess->target.port;
op->targetPortalGroupTag = sess->target.pgt;
return T1;
}
}
sleep(5); // for now ...
return T1;
default:
return 0; // terminal error
}
}
int
setOptions(isess_t *sess, int flag)
{
isc_opt_t oop;
char *sep;
debug_called(3);
bzero(&oop, sizeof(isc_opt_t));
if((flag & SESS_FULLFEATURE) == 0) {
oop.initiatorName = sess->op->initiatorName;
oop.targetAddress = sess->op->targetAddress;
if(sess->op->targetName != 0)
oop.targetName = sess->op->targetName;
oop.maxRecvDataSegmentLength = sess->op->maxRecvDataSegmentLength;
oop.maxXmitDataSegmentLength = sess->op->maxXmitDataSegmentLength; // XXX:
oop.maxBurstLength = sess->op->maxBurstLength;
oop.maxluns = sess->op->maxluns;
}
else {
/*
| turn on digestion only after login
*/
if(sess->op->headerDigest != NULL) {
sep = strchr(sess->op->headerDigest, ',');
if(sep == NULL)
oop.headerDigest = sess->op->headerDigest;
debug(1, "oop.headerDigest=%s", oop.headerDigest);
}
if(sess->op->dataDigest != NULL) {
sep = strchr(sess->op->dataDigest, ',');
if(sep == NULL)
oop.dataDigest = sess->op->dataDigest;
debug(1, "oop.dataDigest=%s", oop.dataDigest);
}
}
if(ioctl(sess->fd, ISCSISETOPT, &oop)) {
perror("ISCSISETOPT");
return -1;
}
return 0;
}
static trans_t
startSession(isess_t *sess)
{
int n, fd, nfd;
char *dev;
debug_called(3);
if((sess->flags & SESS_CONNECTED) == 0) {
return T2;
}
if(sess->fd == -1) {
fd = open(iscsidev, O_RDWR);
if(fd < 0) {
perror(iscsidev);
return 0;
}
{
// XXX: this has to go
size_t n;
n = sizeof(sess->isid);
if(sysctlbyname("net.iscsi_initiator.isid", (void *)sess->isid, (size_t *)&n, 0, 0) != 0)
perror("sysctlbyname");
}
if(ioctl(fd, ISCSISETSES, &n)) {
perror("ISCSISETSES");
return 0;
}
asprintf(&dev, "%s%d", iscsidev, n);
nfd = open(dev, O_RDWR);
if(nfd < 0) {
perror(dev);
free(dev);
return 0;
}
free(dev);
close(fd);
sess->fd = nfd;
if(setOptions(sess, 0) != 0)
return -1;
}
if(ioctl(sess->fd, ISCSISETSOC, &sess->soc)) {
perror("ISCSISETSOC");
return 0;
}
return T4;
}
isess_t *currsess;
static void
trap(int sig)
{
syslog(LOG_NOTICE, "trapped signal %d", sig);
fprintf(stderr, "trapped signal %d\n", sig);
switch(sig) {
case SIGHUP:
currsess->flags |= SESS_DISCONNECT;
break;
case SIGUSR1:
currsess->flags |= SESS_RECONNECT;
break;
case SIGINT:
case SIGTERM:
default:
return; // ignore
}
}
static int
doCAM(isess_t *sess)
{
char pathstr[1024];
union ccb *ccb;
int i, n;
if(ioctl(sess->fd, ISCSIGETCAM, &sess->cam) != 0) {
syslog(LOG_WARNING, "ISCSIGETCAM failed: %d", errno);
return 0;
}
debug(1, "nluns=%d", sess->cam.target_nluns);
/*
| for now will do this for each lun ...
*/
for(n = i = 0; i < sess->cam.target_nluns; i++) {
debug(2, "CAM path_id=%d target_id=%d",
sess->cam.path_id, sess->cam.target_id);
sess->camdev = cam_open_btl(sess->cam.path_id, sess->cam.target_id,
i, O_RDWR, NULL);
if(sess->camdev == NULL) {
//syslog(LOG_WARNING, "%s", cam_errbuf);
debug(3, "%s", cam_errbuf);
continue;
}
cam_path_string(sess->camdev, pathstr, sizeof(pathstr));
debug(2, "pathstr=%s", pathstr);
ccb = cam_getccb(sess->camdev);
Fix multiple Coverity Out-of-bounds access false postive issues in CAM The currently used idiom for clearing the part of a ccb after its header generates one or two Coverity errors for each time it is used. All instances generate an Out-of-bounds access (ARRAY_VS_SINGLETON) error because of the treatment of the header as a two element array, with a pointer to the non-existent second element being passed as the starting address to bzero(). Some instances also alsp generate Out-of-bounds access (OVERRUN) errors, probably because the space being cleared is larger than the sizeofstruct ccb_hdr). In addition, this idiom is difficult for humans to understand and it is error prone. The user has to chose the proper struct ccb_* type (which does not appear in the surrounding code) for the sizeof() in the length calculation. I found several instances where the length was incorrect, which could cause either an actual out of bounds write, or incompletely clear the ccb. A better way is to write the code to clear the ccb itself starting at sizeof(ccb_hdr) bytes from the start of the ccb, and calculate the length based on the specific type of struct ccb_* being cleared as specified by the union ccb member being used. The latter can normally be seen in the nearby code. This is friendlier for Coverity and other static analysis tools because they will see that the intent is to clear the trailing part of the ccb. Wrap all of the boilerplate code in a convenient macro that only requires a pointer to the desired union ccb member (or a pointer to the union ccb itself) as an argument. Reported by: Coverity CID: 1007578, 1008684, 1009724, 1009773, 1011304, 1011306 CID: 1011307, 1011308, 1011309, 1011310, 1011311, 1011312 CID: 1011313, 1011314, 1011315, 1011316, 1011317, 1011318 CID: 1011319, 1011320, 1011321, 1011322, 1011324, 1011325 CID: 1011326, 1011327, 1011328, 1011329, 1011330, 1011374 CID: 1011390, 1011391, 1011392, 1011393, 1011394, 1011395 CID: 1011396, 1011397, 1011398, 1011399, 1011400, 1011401 CID: 1011402, 1011403, 1011404, 1011405, 1011406, 1011408 CID: 1011409, 1011410, 1011411, 1011412, 1011413, 1011414 CID: 1017461, 1018387, 1086860, 1086874, 1194257, 1229897 CID: 1229968, 1306229, 1306234, 1331282, 1331283, 1331294 CID: 1331295, 1331535, 1331536, 1331539, 1331540, 1341623 CID: 1341624, 1341637, 1341638, 1355264, 1355324 Reviewed by: scottl, ken, delphij, imp MFH: 1 month Differential Revision: https://reviews.freebsd.org/D6496
2016-05-24 00:57:11 +00:00
CCB_CLEAR_ALL_EXCEPT_HDR(&ccb->crs);
ccb->ccb_h.func_code = XPT_REL_SIMQ;
ccb->crs.release_flags = RELSIM_ADJUST_OPENINGS;
ccb->crs.openings = sess->op->tags;
if(cam_send_ccb(sess->camdev, ccb) < 0)
debug(2, "%s", cam_errbuf);
else
if((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
syslog(LOG_WARNING, "XPT_REL_SIMQ CCB failed");
// cam_error_print(sess->camdev, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr);
}
else {
n++;
syslog(LOG_INFO, "%s tagged openings now %d\n", pathstr, ccb->crs.openings);
}
cam_freeccb(ccb);
cam_close_device(sess->camdev);
}
return n;
}
static trans_t
supervise(isess_t *sess)
{
int sig, val;
debug_called(3);
if(strcmp(sess->op->sessionType, "Discovery") == 0) {
sess->flags |= SESS_DISCONNECT;
return T9;
}
if(vflag)
printf("ready to go scsi\n");
if(setOptions(sess, SESS_FULLFEATURE) != 0)
return 0; // failure
if((sess->flags & SESS_FULLFEATURE) == 0) {
if(daemon(0, 1) != 0) {
perror("daemon");
exit(1);
}
if(sess->op->pidfile != NULL) {
FILE *pidf;
pidf = fopen(sess->op->pidfile, "w");
if(pidf != NULL) {
fprintf(pidf, "%d\n", getpid());
fclose(pidf);
}
}
openlog("iscontrol", LOG_CONS|LOG_PERROR|LOG_PID|LOG_NDELAY, LOG_KERN);
syslog(LOG_INFO, "running");
currsess = sess;
if(ioctl(sess->fd, ISCSISTART)) {
perror("ISCSISTART");
return -1;
}
if(doCAM(sess) == 0) {
syslog(LOG_WARNING, "no device found");
ioctl(sess->fd, ISCSISTOP);
return T15;
}
}
else {
if(ioctl(sess->fd, ISCSIRESTART)) {
perror("ISCSIRESTART");
return -1;
}
}
signal(SIGINT, trap);
signal(SIGHUP, trap);
signal(SIGTERM, trap);
sig = SIGUSR1;
signal(sig, trap);
if(ioctl(sess->fd, ISCSISIGNAL, &sig)) {
perror("ISCSISIGNAL");
return -1;
}
sess->flags |= SESS_FULLFEATURE;
sess->flags &= ~(SESS_REDIRECT | SESS_RECONNECT);
if(vflag)
printf("iscontrol: supervise starting main loop\n");
/*
| the main loop - actually do nothing
| all the work is done inside the kernel
*/
while((sess->flags & (SESS_REDIRECT|SESS_RECONNECT|SESS_DISCONNECT)) == 0) {
// do something?
// like sending a nop_out?
sleep(60);
}
printf("iscontrol: supervise going down\n");
syslog(LOG_INFO, "sess flags=%x", sess->flags);
sig = 0;
if(ioctl(sess->fd, ISCSISIGNAL, &sig)) {
perror("ISCSISIGNAL");
}
if(sess->flags & SESS_DISCONNECT) {
sess->flags &= ~SESS_FULLFEATURE;
return T9;
}
else {
val = 0;
if(ioctl(sess->fd, ISCSISTOP, &val)) {
perror("ISCSISTOP");
}
sess->flags |= SESS_INITIALLOGIN1;
}
return T8;
}
static int
handledDiscoveryResp(isess_t *sess, pdu_t *pp)
{
u_char *ptr;
int len, n;
debug_called(3);
len = pp->ds_len;
ptr = pp->ds_addr;
while(len > 0) {
if(*ptr != 0)
printf("%s\n", ptr);
n = strlen((char *)ptr) + 1;
len -= n;
ptr += n;
}
return 0;
}
static int
doDiscovery(isess_t *sess)
{
pdu_t spp;
text_req_t *tp = (text_req_t *)&spp.ipdu.bhs;
debug_called(3);
bzero(&spp, sizeof(pdu_t));
tp->cmd = ISCSI_TEXT_CMD /*| 0x40 */; // because of a bug in openiscsi-target
tp->F = 1;
tp->ttt = 0xffffffff;
addText(&spp, "SendTargets=All");
return sendPDU(sess, &spp, handledDiscoveryResp);
}
static trans_t
doLogin(isess_t *sess)
{
isc_opt_t *op = sess->op;
int status, count;
debug_called(3);
if(op->chapSecret == NULL && op->tgtChapSecret == NULL)
/*
| don't need any security negotiation
| or in other words: we don't have any secrets to exchange
*/
sess->csg = LON_PHASE;
else
sess->csg = SN_PHASE;
if(sess->tsih) {
sess->tsih = 0; // XXX: no 'reconnect' yet
sess->flags &= ~SESS_NEGODONE; // XXX: KLUDGE
}
count = 10; // should be more than enough
do {
debug(3, "count=%d csg=%d", count, sess->csg);
status = loginPhase(sess);
if(count-- == 0)
// just in case we get into a loop
status = -1;
} while(status == 0 && (sess->csg != FF_PHASE));
sess->flags &= ~SESS_INITIALLOGIN;
debug(3, "status=%d", status);
switch(status) {
case 0: // all is ok ...
sess->flags |= SESS_LOGGEDIN;
if(strcmp(sess->op->sessionType, "Discovery") == 0)
doDiscovery(sess);
return T5;
case 1: // redirect - temporary/permanent
/*
| start from scratch?
*/
sess->flags &= ~SESS_NEGODONE;
sess->flags |= (SESS_REDIRECT | SESS_INITIALLOGIN1);
syslog(LOG_DEBUG, "target sent REDIRECT");
return T7;
case 2: // initiator terminal error
return 0;
case 3: // target terminal error -- could retry ...
sleep(5);
return T7; // lets try
default:
return 0;
}
}
static int
handleLogoutResp(isess_t *sess, pdu_t *pp)
{
if(sess->flags & SESS_DISCONNECT) {
int val = 0;
if(ioctl(sess->fd, ISCSISTOP, &val)) {
perror("ISCSISTOP");
}
return 0;
}
return T13;
}
static trans_t
startLogout(isess_t *sess)
{
pdu_t spp;
logout_req_t *p = (logout_req_t *)&spp.ipdu.bhs;
bzero(&spp, sizeof(pdu_t));
p->cmd = ISCSI_LOGOUT_CMD| 0x40;
p->reason = BIT(7) | 0;
p->CID = htons(1);
return sendPDU(sess, &spp, handleLogoutResp);
}
static trans_t
inLogout(isess_t *sess)
{
if(sess->flags & SESS_RECONNECT)
return T18;
return 0;
}
typedef enum {
S1, S2, /*S3,*/ S4, S5, S6, S7, S8
} state_t;
/**
S1: FREE
S2: XPT_WAIT
S4: IN_LOGIN
S5: LOGGED_IN
S6: IN_LOGOUT
S7: LOGOUT_REQUESTED
S8: CLEANUP_WAIT
-------<-------------+
+--------->/ S1 \<----+ |
T13| +->\ /<-+ \ |
| / ---+--- \ \ |
| / | T2 \ | |
| T8 | |T1 | | |
| | | / |T7 |
| | | / | |
| | | / | |
| | V / / |
| | ------- / / |
| | / S2 \ / |
| | \ / / |
| | ---+--- / |
| | |T4 / |
| | V / | T18
| | ------- / |
| | / S4 \ |
| | \ / |
| | ---+--- | T15
| | |T5 +--------+---------+
| | | /T16+-----+------+ |
| | | / -+-----+--+ | |
| | | / / S7 \ |T12| |
| | | / +->\ /<-+ V V
| | | / / -+----- -------
| | | / /T11 |T10 / S8 \
| | V / / V +----+ \ /
| | ---+-+- ----+-- | -------
| | / S5 \T9 / S6 \<+ ^
| +-----\ /--->\ / T14 |
| ------- --+----+------+T17
+---------------------------+
*/
int
fsm(isc_opt_t *op)
{
state_t state;
isess_t *sess;
if((sess = calloc(1, sizeof(isess_t))) == NULL) {
// boy, is this a bad start ...
fprintf(stderr, "no memory!\n");
return -1;
}
state = S1;
sess->op = op;
sess->fd = -1;
sess->soc = -1;
sess->target.address = strdup(op->targetAddress);
sess->target.port = op->port;
sess->target.pgt = op->targetPortalGroupTag;
sess->flags = SESS_INITIALLOGIN | SESS_INITIALLOGIN1;
do {
switch(state) {
case S1:
switch(tcpConnect(sess)) {
case T1: state = S2; break;
default: state = S8; break;
}
break;
case S2:
switch(startSession(sess)) {
case T2: state = S1; break;
case T4: state = S4; break;
default: state = S8; break;
}
break;
case S4:
switch(doLogin(sess)) {
case T7: state = S1; break;
case T5: state = S5; break;
default: state = S8; break;
}
break;
case S5:
switch(supervise(sess)) {
case T8: state = S1; break;
case T9: state = S6; break;
case T11: state = S7; break;
case T15: state = S8; break;
default: state = S8; break;
}
break;
case S6:
switch(startLogout(sess)) {
case T13: state = S1; break;
case T14: state = S6; break;
case T16: state = S8; break;
default: state = S8; break;
}
break;
case S7:
switch(inLogout(sess)) {
case T18: state = S1; break;
case T10: state = S6; break;
case T12: state = S7; break;
case T16: state = S8; break;
default: state = S8; break;
}
break;
case S8:
// maybe do some clean up?
syslog(LOG_INFO, "terminated");
return 0;
}
} while(1);
}