d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a4d10fa904
freebsd-skq/sys/sparc64/isa/ofw_isa.h

101 lines
4.0 KiB
C
Raw Normal View History

/* -> /*- for license, minor formatting changes
2005-01-07 02:29:27 +00:00
/*-
Add ISA support code for sparc64.
2001-11-09 20:21:21 +00:00
* Copyright (c) 1999, 2000 Matthew R. Green
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
Sync licenses and the corresponding RCS IDs with NetBSD, mainly switching the licenses of Matthew R. Green and the TNF to 2-clause. Obtained from: NetBSD
2011-03-12 14:33:32 +00:00
* from: NetBSD: ebus.c,v 1.52 2008/05/29 14:51:26 mrg Exp
*/
/*-
* Copyright (c) 2001 Thomas Moestl <tmm@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
Add ISA support code for sparc64.
2001-11-09 20:21:21 +00:00
*
* $FreeBSD$
*/
#ifndef _SPARC64_ISA_OFW_ISA_H_
#define _SPARC64_ISA_OFW_ISA_H_
/*
* ISA PROM structures
*/
struct isa_regs {
u_int32_t phys_hi; /* high bits of physaddr */
u_int32_t phys_lo;
u_int32_t size;
};
#define ISA_REG_PHYS(r) \
((((u_int64_t)((r)->phys_hi)) << 32) | ((u_int64_t)(r)->phys_lo))
/* XXX: this is a guess. Verify... */
struct isa_ranges {
u_int32_t child_hi;
u_int32_t child_lo;
u_int32_t phys_hi;
u_int32_t phys_mid;
u_int32_t phys_lo;
u_int32_t size;
};
#define ISA_RANGE_CHILD(r) \
((((u_int64_t)((r)->child_hi)) << 32) | ((u_int64_t)(r)->child_lo))
#define ISA_RANGE_PS(r) (((r)->phys_hi >> 24) & 0x03)
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
#define ISA_RANGE_PHYS(r) \
((((u_int64_t)(r)->phys_mid) << 32) | ((u_int64_t)(r)->phys_lo))
Add ISA support code for sparc64.
2001-11-09 20:21:21 +00:00
Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI bridge driver. By utilizing these, the PCI handling is much more elegant now. The advantages of the new approach are: - Device enumeration should hopefully be more like on Solaris now, so unit numbers should match what's printed on the box more closely. - Real interrupt routing is implemented now, so cardbus bridges etc. have at least a chance to work. - The quirk tables are gone and have been replaced by (hopefully sufficient) heuristics. - Much cleaner code. There was also a report that previously bogus interrupt assignments are fixed now, which can be attributed to the new heuristics. A pitfall, and the reason why this is not the default yet, is that it changes device enumeration, as mentioned above, which can make it necessary to change the system configuration if more than one unit of a device type is present (on a system with two hme cars, for example, it is possible that hme0 becomes hme1 and vice versa after enabling the option). Systems with multiple disk controllers may need to be booted into single user (and require manual specification of the root file system on boot) to adjust the fstab. Nevertheless, I would like to encourage users to use this option, so that it can be made the default soon. In detail, the changes are: - Introduce an OFW PCI bus driver; it inherits most methods from the generic PCI bus driver, but uses the firmware for enumeration, performs additional initialization for devices and firmware-specific interrupt routing. It also implements an OFW-specific method to allow child devices to get their firmware nodes. - Introduce an OFW PCI-PCI bridge driver; again, it inherits most of the generic PCI-PCI bridge driver; it has it's own method for interrupt routing, as well as some sparc64-specific methods (one to get the node again, and one to adjust the bridge bus range, since we need to reenumerate all PCI buses). - Convert the apb driver to the new way of handling things. - Provide a common framework for OFW bridge drivers, used be the two drivers above. - Provide a small common framework for interrupt routing (for all bridge types). - Convert the psycho driver to the new framework; this gets rid of a bunch of old kludges in pci_read_config(), and the whole preinitialization (ofw_pci_init()). - Convert the ISA MD part and the EBus driver to the new way interrupts and nodes are handled. - Introduce types for firmware interrupt properties. - Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only required for PCI), and move it to a more correct location (new support methodsx were also added, and an old one was deprecated). - Fix a bunch of minor bugs, perform some cleanups. In some cases, I introduced some minor code duplication to keep the new code clean, in hopes that the old code will be unifdef'ed soon. Reviewed in part by: imp Tested by: jake, Marius Strobl <marius@alchemy.franken.de>, Sergey Mokryshev <mokr@mokr.net>, Chris Jackman <cjackNOSPAM@klatsch.org> Info on u30 firmware provided by: kris
2003-07-01 14:52:47 +00:00
typedef u_int32_t ofw_isa_intr_t;
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
int ofw_isa_range_restype(struct isa_ranges *);
Add ISA support code for sparc64.
2001-11-09 20:21:21 +00:00
/* Map an IO range. Returns the resource type of the range. */
Fix the EBus driver to work with the new PCI code. Unlike other PCI bridges, the EBus bridge has resource ranges it claims exclusively to map its children into in its BARs. Hence, we need to allocate these completely and manage them for the children, instead of just passing allocations through to the PCI layer as we did before. While being there, split ebus_probe(), which did also contain code normally belonging into the attach method, into ebus_probe() and ebus_attach(), and perform some minor cleanups.
2004-04-28 13:06:46 +00:00
int ofw_isa_range_map(struct isa_ranges *, int, u_long *, u_long *, int *);
Add ISA support code for sparc64.
2001-11-09 20:21:21 +00:00
Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI bridge driver. By utilizing these, the PCI handling is much more elegant now. The advantages of the new approach are: - Device enumeration should hopefully be more like on Solaris now, so unit numbers should match what's printed on the box more closely. - Real interrupt routing is implemented now, so cardbus bridges etc. have at least a chance to work. - The quirk tables are gone and have been replaced by (hopefully sufficient) heuristics. - Much cleaner code. There was also a report that previously bogus interrupt assignments are fixed now, which can be attributed to the new heuristics. A pitfall, and the reason why this is not the default yet, is that it changes device enumeration, as mentioned above, which can make it necessary to change the system configuration if more than one unit of a device type is present (on a system with two hme cars, for example, it is possible that hme0 becomes hme1 and vice versa after enabling the option). Systems with multiple disk controllers may need to be booted into single user (and require manual specification of the root file system on boot) to adjust the fstab. Nevertheless, I would like to encourage users to use this option, so that it can be made the default soon. In detail, the changes are: - Introduce an OFW PCI bus driver; it inherits most methods from the generic PCI bus driver, but uses the firmware for enumeration, performs additional initialization for devices and firmware-specific interrupt routing. It also implements an OFW-specific method to allow child devices to get their firmware nodes. - Introduce an OFW PCI-PCI bridge driver; again, it inherits most of the generic PCI-PCI bridge driver; it has it's own method for interrupt routing, as well as some sparc64-specific methods (one to get the node again, and one to adjust the bridge bus range, since we need to reenumerate all PCI buses). - Convert the apb driver to the new way of handling things. - Provide a common framework for OFW bridge drivers, used be the two drivers above. - Provide a small common framework for interrupt routing (for all bridge types). - Convert the psycho driver to the new framework; this gets rid of a bunch of old kludges in pci_read_config(), and the whole preinitialization (ofw_pci_init()). - Convert the ISA MD part and the EBus driver to the new way interrupts and nodes are handled. - Introduce types for firmware interrupt properties. - Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only required for PCI), and move it to a more correct location (new support methodsx were also added, and an old one was deprecated). - Fix a bunch of minor bugs, perform some cleanups. In some cases, I introduced some minor code duplication to keep the new code clean, in hopes that the old code will be unifdef'ed soon. Reviewed in part by: imp Tested by: jake, Marius Strobl <marius@alchemy.franken.de>, Sergey Mokryshev <mokr@mokr.net>, Chris Jackman <cjackNOSPAM@klatsch.org> Info on u30 firmware provided by: kris
2003-07-01 14:52:47 +00:00
ofw_pci_intr_t ofw_isa_route_intr(device_t, phandle_t, struct ofw_bus_iinfo *,
ofw_isa_intr_t);
Add ISA support code for sparc64.
2001-11-09 20:21:21 +00:00
#endif /* !_SPARC64_ISA_OFW_ISA_H_ */
Reference in New Issue Copy Permalink