More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
/* $NetBSD: usbdi.c,v 1.60 2000/01/19 00:23:58 augustss Exp $ */
|
1999-01-22 00:51:12 +00:00
|
|
|
/* $FreeBSD$ */
|
1998-11-26 23:13:13 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Copyright (c) 1998 The NetBSD Foundation, Inc.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
1999-01-07 23:07:57 +00:00
|
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
2000-05-14 16:43:10 +00:00
|
|
|
* by Lennart Augustsson (lennart@augustsson.net) at
|
1999-01-07 23:07:57 +00:00
|
|
|
* Carlstedt Research & Technology.
|
1998-11-26 23:13:13 +00:00
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
|
|
* must display the following acknowledgement:
|
|
|
|
* This product includes software developed by the NetBSD
|
|
|
|
* Foundation, Inc. and its contributors.
|
|
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
|
|
* contributors may be used to endorse or promote products derived
|
|
|
|
* from this software without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
1999-10-07 19:26:38 +00:00
|
|
|
#if defined(__NetBSD__) || defined(__OpenBSD__)
|
1998-11-26 23:13:13 +00:00
|
|
|
#include <sys/device.h>
|
1999-10-07 19:26:38 +00:00
|
|
|
#elif defined(__FreeBSD__)
|
1998-11-26 23:13:13 +00:00
|
|
|
#include <sys/module.h>
|
|
|
|
#include <sys/bus.h>
|
1999-11-17 22:33:51 +00:00
|
|
|
#include "usb_if.h"
|
|
|
|
#if defined(DIAGNOSTIC) && defined(__i386__)
|
|
|
|
#include <machine/cpu.h>
|
|
|
|
#endif
|
1998-11-26 23:13:13 +00:00
|
|
|
#endif
|
|
|
|
#include <sys/malloc.h>
|
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
#include <machine/bus.h>
|
1998-11-26 23:13:13 +00:00
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
#include <dev/usb/usb.h>
|
1998-11-26 23:13:13 +00:00
|
|
|
#include <dev/usb/usbdi.h>
|
|
|
|
#include <dev/usb/usbdi_util.h>
|
|
|
|
#include <dev/usb/usbdivar.h>
|
1999-10-07 19:26:38 +00:00
|
|
|
#include <dev/usb/usb_mem.h>
|
1998-11-26 23:13:13 +00:00
|
|
|
|
1999-01-07 23:07:57 +00:00
|
|
|
#if defined(__FreeBSD__)
|
|
|
|
#include "usb_if.h"
|
2000-10-16 18:50:00 +00:00
|
|
|
#include <machine/clock.h>
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
#define delay(d) DELAY(d)
|
1999-01-07 23:07:57 +00:00
|
|
|
#endif
|
1999-11-17 22:33:51 +00:00
|
|
|
|
1998-11-26 23:13:13 +00:00
|
|
|
#ifdef USB_DEBUG
|
1999-04-11 20:50:33 +00:00
|
|
|
#define DPRINTF(x) if (usbdebug) logprintf x
|
|
|
|
#define DPRINTFN(n,x) if (usbdebug>(n)) logprintf x
|
1998-11-26 23:13:13 +00:00
|
|
|
extern int usbdebug;
|
|
|
|
#else
|
|
|
|
#define DPRINTF(x)
|
|
|
|
#define DPRINTFN(n,x)
|
|
|
|
#endif
|
|
|
|
|
2000-07-17 18:41:20 +00:00
|
|
|
Static usbd_status usbd_ar_pipe(usbd_pipe_handle pipe);
|
2000-04-03 20:58:30 +00:00
|
|
|
Static void usbd_do_request_async_cb
|
2000-07-17 18:41:20 +00:00
|
|
|
(usbd_xfer_handle, usbd_private_handle, usbd_status);
|
|
|
|
Static void usbd_start_next(usbd_pipe_handle pipe);
|
2000-04-03 20:58:30 +00:00
|
|
|
Static usbd_status usbd_open_pipe_ival
|
2000-07-17 18:41:20 +00:00
|
|
|
(usbd_interface_handle, u_int8_t, u_int8_t, usbd_pipe_handle *, int);
|
1999-11-17 22:33:51 +00:00
|
|
|
|
2000-04-03 20:58:30 +00:00
|
|
|
Static int usbd_nbuses = 0;
|
1998-11-26 23:13:13 +00:00
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
void
|
|
|
|
usbd_init()
|
|
|
|
{
|
|
|
|
usbd_nbuses++;
|
|
|
|
}
|
1999-10-07 19:26:38 +00:00
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
void
|
|
|
|
usbd_finish()
|
|
|
|
{
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
--usbd_nbuses;
|
1999-11-17 22:33:51 +00:00
|
|
|
}
|
|
|
|
|
2000-07-17 18:41:20 +00:00
|
|
|
Static __inline int usbd_xfer_isread(usbd_xfer_handle xfer);
|
2000-04-03 20:58:30 +00:00
|
|
|
Static __inline int
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_xfer_isread(xfer)
|
|
|
|
usbd_xfer_handle xfer;
|
1999-10-07 19:26:38 +00:00
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
if (xfer->rqflags & URQ_REQUEST)
|
|
|
|
return (xfer->request.bmRequestType & UT_READ);
|
1999-10-07 19:26:38 +00:00
|
|
|
else
|
1999-11-17 22:33:51 +00:00
|
|
|
return (xfer->pipe->endpoint->edesc->bEndpointAddress &
|
1999-10-07 19:26:38 +00:00
|
|
|
UE_DIR_IN);
|
|
|
|
}
|
1998-11-26 23:13:13 +00:00
|
|
|
|
1999-04-11 20:50:33 +00:00
|
|
|
#ifdef USB_DEBUG
|
2000-07-17 18:41:20 +00:00
|
|
|
void usbd_dump_queue(usbd_pipe_handle);
|
1999-04-11 20:50:33 +00:00
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
void
|
|
|
|
usbd_dump_queue(pipe)
|
|
|
|
usbd_pipe_handle pipe;
|
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_xfer_handle xfer;
|
1999-10-07 19:26:38 +00:00
|
|
|
|
|
|
|
printf("usbd_dump_queue: pipe=%p\n", pipe);
|
1999-11-17 22:33:51 +00:00
|
|
|
for (xfer = SIMPLEQ_FIRST(&pipe->queue);
|
|
|
|
xfer;
|
|
|
|
xfer = SIMPLEQ_NEXT(xfer, next)) {
|
|
|
|
printf(" xfer=%p\n", xfer);
|
1999-10-07 19:26:38 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
1999-04-11 20:50:33 +00:00
|
|
|
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_status
|
|
|
|
usbd_open_pipe(iface, address, flags, pipe)
|
|
|
|
usbd_interface_handle iface;
|
|
|
|
u_int8_t address;
|
|
|
|
u_int8_t flags;
|
|
|
|
usbd_pipe_handle *pipe;
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
{
|
|
|
|
return (usbd_open_pipe_ival(iface, address, flags, pipe,
|
|
|
|
USBD_DEFAULT_INTERVAL));
|
|
|
|
}
|
|
|
|
|
|
|
|
usbd_status
|
|
|
|
usbd_open_pipe_ival(iface, address, flags, pipe, ival)
|
|
|
|
usbd_interface_handle iface;
|
|
|
|
u_int8_t address;
|
|
|
|
u_int8_t flags;
|
|
|
|
usbd_pipe_handle *pipe;
|
|
|
|
int ival;
|
1998-11-26 23:13:13 +00:00
|
|
|
{
|
|
|
|
usbd_pipe_handle p;
|
|
|
|
struct usbd_endpoint *ep;
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_status err;
|
1999-01-07 23:07:57 +00:00
|
|
|
int i;
|
1998-11-26 23:13:13 +00:00
|
|
|
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
DPRINTFN(3,("usbd_open_pipe: iface=%p address=0x%x flags=0x%x\n",
|
|
|
|
iface, address, flags));
|
|
|
|
|
1998-11-26 23:13:13 +00:00
|
|
|
for (i = 0; i < iface->idesc->bNumEndpoints; i++) {
|
|
|
|
ep = &iface->endpoints[i];
|
1999-11-28 21:01:06 +00:00
|
|
|
if (ep->edesc == NULL)
|
|
|
|
return (USBD_IOERROR);
|
1998-11-26 23:13:13 +00:00
|
|
|
if (ep->edesc->bEndpointAddress == address)
|
|
|
|
goto found;
|
|
|
|
}
|
|
|
|
return (USBD_BAD_ADDRESS);
|
|
|
|
found:
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
if ((flags & USBD_EXCLUSIVE_USE) && ep->refcnt != 0)
|
1998-11-26 23:13:13 +00:00
|
|
|
return (USBD_IN_USE);
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
err = usbd_setup_pipe(iface->device, iface, ep, ival, &p);
|
1999-11-17 22:33:51 +00:00
|
|
|
if (err)
|
|
|
|
return (err);
|
1998-11-26 23:13:13 +00:00
|
|
|
LIST_INSERT_HEAD(&iface->pipes, p, next);
|
|
|
|
*pipe = p;
|
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
|
|
}
|
|
|
|
|
|
|
|
usbd_status
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
usbd_open_pipe_intr(iface, address, flags, pipe, priv, buffer, len, cb, ival)
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_interface_handle iface;
|
|
|
|
u_int8_t address;
|
|
|
|
u_int8_t flags;
|
|
|
|
usbd_pipe_handle *pipe;
|
|
|
|
usbd_private_handle priv;
|
|
|
|
void *buffer;
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
u_int32_t len;
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_callback cb;
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
int ival;
|
1998-11-26 23:13:13 +00:00
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_status err;
|
|
|
|
usbd_xfer_handle xfer;
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_pipe_handle ipipe;
|
|
|
|
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
DPRINTFN(3,("usbd_open_pipe_intr: address=0x%x flags=0x%x len=%d\n",
|
|
|
|
address, flags, len));
|
|
|
|
|
|
|
|
err = usbd_open_pipe_ival(iface, address, USBD_EXCLUSIVE_USE,
|
|
|
|
&ipipe, ival);
|
1999-11-17 22:33:51 +00:00
|
|
|
if (err)
|
|
|
|
return (err);
|
1999-11-28 21:01:06 +00:00
|
|
|
xfer = usbd_alloc_xfer(iface->device);
|
1999-11-17 22:33:51 +00:00
|
|
|
if (xfer == NULL) {
|
|
|
|
err = USBD_NOMEM;
|
1998-11-26 23:13:13 +00:00
|
|
|
goto bad1;
|
1999-10-07 19:26:38 +00:00
|
|
|
}
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
usbd_setup_xfer(xfer, ipipe, priv, buffer, len, flags,
|
|
|
|
USBD_NO_TIMEOUT, cb);
|
1999-11-17 22:33:51 +00:00
|
|
|
ipipe->intrxfer = xfer;
|
1999-10-07 19:26:38 +00:00
|
|
|
ipipe->repeat = 1;
|
1999-11-17 22:33:51 +00:00
|
|
|
err = usbd_transfer(xfer);
|
1998-11-26 23:13:13 +00:00
|
|
|
*pipe = ipipe;
|
1999-11-17 22:33:51 +00:00
|
|
|
if (err != USBD_IN_PROGRESS)
|
1999-10-07 19:26:38 +00:00
|
|
|
goto bad2;
|
1998-11-26 23:13:13 +00:00
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
|
|
|
|
|
|
bad2:
|
1999-11-17 22:33:51 +00:00
|
|
|
ipipe->intrxfer = NULL;
|
1999-10-07 19:26:38 +00:00
|
|
|
ipipe->repeat = 0;
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_free_xfer(xfer);
|
1999-10-07 19:26:38 +00:00
|
|
|
bad1:
|
|
|
|
usbd_close_pipe(ipipe);
|
1999-11-17 22:33:51 +00:00
|
|
|
return (err);
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
usbd_status
|
|
|
|
usbd_close_pipe(pipe)
|
|
|
|
usbd_pipe_handle pipe;
|
|
|
|
{
|
1999-10-07 19:26:38 +00:00
|
|
|
#ifdef DIAGNOSTIC
|
1999-11-17 22:33:51 +00:00
|
|
|
if (pipe == NULL) {
|
1999-10-07 19:26:38 +00:00
|
|
|
printf("usbd_close_pipe: pipe==NULL\n");
|
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
1998-11-26 23:13:13 +00:00
|
|
|
if (--pipe->refcnt != 0)
|
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
|
|
if (SIMPLEQ_FIRST(&pipe->queue) != 0)
|
|
|
|
return (USBD_PENDING_REQUESTS);
|
|
|
|
LIST_REMOVE(pipe, next);
|
|
|
|
pipe->endpoint->refcnt--;
|
|
|
|
pipe->methods->close(pipe);
|
1999-11-17 22:33:51 +00:00
|
|
|
if (pipe->intrxfer != NULL)
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_free_xfer(pipe->intrxfer);
|
1998-11-26 23:13:13 +00:00
|
|
|
free(pipe, M_USB);
|
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
|
|
}
|
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
usbd_status
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_transfer(xfer)
|
|
|
|
usbd_xfer_handle xfer;
|
1998-11-26 23:13:13 +00:00
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_pipe_handle pipe = xfer->pipe;
|
|
|
|
usb_dma_t *dmap = &xfer->dmabuf;
|
|
|
|
usbd_status err;
|
1999-10-07 19:26:38 +00:00
|
|
|
u_int size;
|
|
|
|
int s;
|
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
DPRINTFN(5,("usbd_transfer: xfer=%p, flags=%d, pipe=%p, running=%d\n",
|
|
|
|
xfer, xfer->flags, pipe, pipe->running));
|
1999-10-07 19:26:38 +00:00
|
|
|
#ifdef USB_DEBUG
|
|
|
|
if (usbdebug > 5)
|
|
|
|
usbd_dump_queue(pipe);
|
|
|
|
#endif
|
1999-11-17 22:33:51 +00:00
|
|
|
xfer->done = 0;
|
1999-10-07 19:26:38 +00:00
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
size = xfer->length;
|
|
|
|
/* If there is no buffer, allocate one. */
|
|
|
|
if (!(xfer->rqflags & URQ_DEV_DMABUF) && size != 0) {
|
1999-10-07 19:26:38 +00:00
|
|
|
struct usbd_bus *bus = pipe->device->bus;
|
|
|
|
|
|
|
|
#ifdef DIAGNOSTIC
|
1999-11-17 22:33:51 +00:00
|
|
|
if (xfer->rqflags & URQ_AUTO_DMABUF)
|
1999-10-07 19:26:38 +00:00
|
|
|
printf("usbd_transfer: has old buffer!\n");
|
|
|
|
#endif
|
1999-11-17 22:33:51 +00:00
|
|
|
err = bus->methods->allocm(bus, dmap, size);
|
|
|
|
if (err)
|
|
|
|
return (err);
|
|
|
|
xfer->rqflags |= URQ_AUTO_DMABUF;
|
1999-10-07 19:26:38 +00:00
|
|
|
}
|
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
/* Copy data if going out. */
|
|
|
|
if (!(xfer->flags & USBD_NO_COPY) && size != 0 &&
|
|
|
|
!usbd_xfer_isread(xfer))
|
2000-02-10 18:50:19 +00:00
|
|
|
memcpy(KERNADDR(dmap, 0), xfer->buffer, size);
|
1999-11-17 22:33:51 +00:00
|
|
|
|
|
|
|
err = pipe->methods->transfer(xfer);
|
1999-10-07 19:26:38 +00:00
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
if (err != USBD_IN_PROGRESS && err) {
|
1999-10-07 19:26:38 +00:00
|
|
|
/* The transfer has not been queued, so free buffer. */
|
1999-11-17 22:33:51 +00:00
|
|
|
if (xfer->rqflags & URQ_AUTO_DMABUF) {
|
1999-10-07 19:26:38 +00:00
|
|
|
struct usbd_bus *bus = pipe->device->bus;
|
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
bus->methods->freem(bus, &xfer->dmabuf);
|
|
|
|
xfer->rqflags &= ~URQ_AUTO_DMABUF;
|
1999-10-07 19:26:38 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
if (!(xfer->flags & USBD_SYNCHRONOUS))
|
|
|
|
return (err);
|
1999-10-07 19:26:38 +00:00
|
|
|
|
|
|
|
/* Sync transfer, wait for completion. */
|
1999-11-17 22:33:51 +00:00
|
|
|
if (err != USBD_IN_PROGRESS)
|
|
|
|
return (err);
|
1999-10-07 19:26:38 +00:00
|
|
|
s = splusb();
|
1999-11-17 22:33:51 +00:00
|
|
|
if (!xfer->done) {
|
1999-10-07 19:26:38 +00:00
|
|
|
if (pipe->device->bus->use_polling)
|
|
|
|
panic("usbd_transfer: not done\n");
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
/* XXX Temporary hack XXX */
|
|
|
|
if (xfer->flags & USBD_NO_TSLEEP) {
|
|
|
|
int i;
|
|
|
|
usbd_bus_handle bus = pipe->device->bus;
|
|
|
|
int to = xfer->timeout * 1000;
|
2000-01-19 01:01:56 +00:00
|
|
|
for (i = 0; i < to; i += 10) {
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
delay(10);
|
2000-01-19 01:01:56 +00:00
|
|
|
bus->methods->do_poll(bus);
|
This commit adds device driver support for the ADMtek AN986 Pegasus
USB ethernet chip. Adapters that use this chip include the LinkSys
USB100TX. There are a few others, but I'm not certain of their
availability in the U.S. I used an ADMtek eval board for development.
Note that while the ADMtek chip is a 100Mbps device, you can't really
get 100Mbps speeds over USB. Regardless, this driver uses miibus to
allow speed and duplex mode selection as well as autonegotiation.
Building and kldloading the driver as a module is also supported.
Note that in order to make this driver work, I had to make what some
may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer()
function will use tsleep() for synchronous transfers that don't complete
right away. This is a problem since there are times when we need to
do sync transfers from an interrupt context (i.e. when reading registers
from the MAC via the control endpoint), where tsleep() us a no-no.
My hack allows the driver to have the code poll for transfer completion
subject to the xfer->timeout timeout rather that calling tsleep().
This hack is controlled by a quirk entry and is only enabled for the
ADMtek device.
Now, I'm sure there are a few of you out there ready to jump on me
and suggest some other approach that doesn't involve a busy wait. The
only solution that might work is to handle the interrupts in a kernel
thread, where you may have something resembling a process context that
makes it okay to tsleep(). This is lovely, except we don't have any
mechanism like that now, and I'm not about to implement such a thing
myself since it's beyond the scope of driver development. (Translation:
I'll be damned if I know how to do it.) If FreeBSD ever aquires such
a mechanism, I'll be glad to revisit the driver to take advantage of
it. In the meantime, I settled for what I perceived to be the solution
that involved the least amount of code changes. In general, the hit
is pretty light.
Also note that my only USB test box has a UHCI controller: I haven't
I don't have a machine with an OHCI controller available.
Highlights:
- Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part.
- Updated usbdevs and regenerated generated files
- Updated HARDWARE.TXT and RELNOTES.TXT files
- Updated sysinstall/device.c and userconfig.c
- Updated kernel configs -- device aue0 is commented out by default
- Updated /sys/conf/files
- Added new kld module directory
1999-12-28 02:01:18 +00:00
|
|
|
if (xfer->done)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (!xfer->done)
|
|
|
|
pipe->methods->abort(xfer);
|
|
|
|
} else
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
/* XXX End hack XXX */
|
This commit adds device driver support for the ADMtek AN986 Pegasus
USB ethernet chip. Adapters that use this chip include the LinkSys
USB100TX. There are a few others, but I'm not certain of their
availability in the U.S. I used an ADMtek eval board for development.
Note that while the ADMtek chip is a 100Mbps device, you can't really
get 100Mbps speeds over USB. Regardless, this driver uses miibus to
allow speed and duplex mode selection as well as autonegotiation.
Building and kldloading the driver as a module is also supported.
Note that in order to make this driver work, I had to make what some
may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer()
function will use tsleep() for synchronous transfers that don't complete
right away. This is a problem since there are times when we need to
do sync transfers from an interrupt context (i.e. when reading registers
from the MAC via the control endpoint), where tsleep() us a no-no.
My hack allows the driver to have the code poll for transfer completion
subject to the xfer->timeout timeout rather that calling tsleep().
This hack is controlled by a quirk entry and is only enabled for the
ADMtek device.
Now, I'm sure there are a few of you out there ready to jump on me
and suggest some other approach that doesn't involve a busy wait. The
only solution that might work is to handle the interrupts in a kernel
thread, where you may have something resembling a process context that
makes it okay to tsleep(). This is lovely, except we don't have any
mechanism like that now, and I'm not about to implement such a thing
myself since it's beyond the scope of driver development. (Translation:
I'll be damned if I know how to do it.) If FreeBSD ever aquires such
a mechanism, I'll be glad to revisit the driver to take advantage of
it. In the meantime, I settled for what I perceived to be the solution
that involved the least amount of code changes. In general, the hit
is pretty light.
Also note that my only USB test box has a UHCI controller: I haven't
I don't have a machine with an OHCI controller available.
Highlights:
- Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part.
- Updated usbdevs and regenerated generated files
- Updated HARDWARE.TXT and RELNOTES.TXT files
- Updated sysinstall/device.c and userconfig.c
- Updated kernel configs -- device aue0 is commented out by default
- Updated /sys/conf/files
- Added new kld module directory
1999-12-28 02:01:18 +00:00
|
|
|
tsleep(xfer, PRIBIO, "usbsyn", 0);
|
1999-10-07 19:26:38 +00:00
|
|
|
}
|
|
|
|
splx(s);
|
1999-11-17 22:33:51 +00:00
|
|
|
return (xfer->status);
|
1999-10-07 19:26:38 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Like usbd_transfer(), but waits for completion. */
|
|
|
|
usbd_status
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_sync_transfer(xfer)
|
|
|
|
usbd_xfer_handle xfer;
|
1999-10-07 19:26:38 +00:00
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
xfer->flags |= USBD_SYNCHRONOUS;
|
|
|
|
return (usbd_transfer(xfer));
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
void *
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_alloc_buffer(xfer, size)
|
|
|
|
usbd_xfer_handle xfer;
|
1999-10-07 19:26:38 +00:00
|
|
|
u_int32_t size;
|
1998-11-26 23:13:13 +00:00
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
struct usbd_bus *bus = xfer->device->bus;
|
|
|
|
usbd_status err;
|
1999-01-07 23:07:57 +00:00
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
err = bus->methods->allocm(bus, &xfer->dmabuf, size);
|
|
|
|
if (err)
|
1999-10-07 19:26:38 +00:00
|
|
|
return (0);
|
1999-11-17 22:33:51 +00:00
|
|
|
xfer->rqflags |= URQ_DEV_DMABUF;
|
2000-02-10 18:50:19 +00:00
|
|
|
return (KERNADDR(&xfer->dmabuf, 0));
|
1999-10-07 19:26:38 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_free_buffer(xfer)
|
|
|
|
usbd_xfer_handle xfer;
|
1999-10-07 19:26:38 +00:00
|
|
|
{
|
|
|
|
#ifdef DIAGNOSTIC
|
1999-11-17 22:33:51 +00:00
|
|
|
if (!(xfer->rqflags & (URQ_DEV_DMABUF | URQ_AUTO_DMABUF))) {
|
1999-10-07 19:26:38 +00:00
|
|
|
printf("usbd_free_buffer: no buffer\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
#endif
|
1999-11-17 22:33:51 +00:00
|
|
|
xfer->rqflags &= ~(URQ_DEV_DMABUF | URQ_AUTO_DMABUF);
|
|
|
|
xfer->device->bus->methods->freem(xfer->device->bus, &xfer->dmabuf);
|
1999-01-07 23:07:57 +00:00
|
|
|
}
|
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
void *
|
|
|
|
usbd_get_buffer(xfer)
|
|
|
|
usbd_xfer_handle xfer;
|
|
|
|
{
|
|
|
|
if (!(xfer->rqflags & URQ_DEV_DMABUF))
|
|
|
|
return (0);
|
2000-02-10 18:50:19 +00:00
|
|
|
return (KERNADDR(&xfer->dmabuf, 0));
|
1999-11-17 22:33:51 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
usbd_xfer_handle
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_alloc_xfer(dev)
|
1999-10-07 19:26:38 +00:00
|
|
|
usbd_device_handle dev;
|
1998-11-26 23:13:13 +00:00
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_xfer_handle xfer;
|
1998-11-26 23:13:13 +00:00
|
|
|
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
xfer = dev->bus->methods->allocx(dev->bus);
|
1999-11-17 22:33:51 +00:00
|
|
|
if (xfer == NULL)
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
return (NULL);
|
1999-11-17 22:33:51 +00:00
|
|
|
xfer->device = dev;
|
1999-11-28 21:01:06 +00:00
|
|
|
DPRINTFN(5,("usbd_alloc_xfer() = %p\n", xfer));
|
1999-11-17 22:33:51 +00:00
|
|
|
return (xfer);
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
usbd_status
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_free_xfer(xfer)
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_xfer_handle xfer;
|
1998-11-26 23:13:13 +00:00
|
|
|
{
|
1999-11-28 21:01:06 +00:00
|
|
|
DPRINTFN(5,("usbd_free_xfer: %p\n", xfer));
|
1999-11-17 22:33:51 +00:00
|
|
|
if (xfer->rqflags & (URQ_DEV_DMABUF | URQ_AUTO_DMABUF))
|
|
|
|
usbd_free_buffer(xfer);
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
xfer->device->bus->methods->freex(xfer->device->bus, xfer);
|
1998-11-26 23:13:13 +00:00
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
|
|
}
|
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
void
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_setup_xfer(xfer, pipe, priv, buffer, length, flags, timeout, callback)
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_xfer_handle xfer;
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_pipe_handle pipe;
|
|
|
|
usbd_private_handle priv;
|
|
|
|
void *buffer;
|
|
|
|
u_int32_t length;
|
|
|
|
u_int16_t flags;
|
|
|
|
u_int32_t timeout;
|
2000-07-17 18:41:20 +00:00
|
|
|
void (*callback)(usbd_xfer_handle,
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_private_handle,
|
2000-07-17 18:41:20 +00:00
|
|
|
usbd_status);
|
1998-11-26 23:13:13 +00:00
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
xfer->pipe = pipe;
|
|
|
|
xfer->priv = priv;
|
|
|
|
xfer->buffer = buffer;
|
|
|
|
xfer->length = length;
|
|
|
|
xfer->actlen = 0;
|
|
|
|
xfer->flags = flags;
|
|
|
|
xfer->timeout = timeout;
|
|
|
|
xfer->status = USBD_NOT_STARTED;
|
|
|
|
xfer->callback = callback;
|
|
|
|
xfer->rqflags &= ~URQ_REQUEST;
|
|
|
|
xfer->nframes = 0;
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
void
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_setup_default_xfer(xfer, dev, priv, timeout, req, buffer,
|
1998-11-26 23:13:13 +00:00
|
|
|
length, flags, callback)
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_xfer_handle xfer;
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_device_handle dev;
|
|
|
|
usbd_private_handle priv;
|
|
|
|
u_int32_t timeout;
|
|
|
|
usb_device_request_t *req;
|
|
|
|
void *buffer;
|
|
|
|
u_int32_t length;
|
|
|
|
u_int16_t flags;
|
2000-07-17 18:41:20 +00:00
|
|
|
void (*callback)(usbd_xfer_handle,
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_private_handle,
|
2000-07-17 18:41:20 +00:00
|
|
|
usbd_status);
|
1998-11-26 23:13:13 +00:00
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
xfer->pipe = dev->default_pipe;
|
|
|
|
xfer->priv = priv;
|
|
|
|
xfer->buffer = buffer;
|
|
|
|
xfer->length = length;
|
|
|
|
xfer->actlen = 0;
|
|
|
|
xfer->flags = flags;
|
|
|
|
xfer->timeout = timeout;
|
|
|
|
xfer->status = USBD_NOT_STARTED;
|
|
|
|
xfer->callback = callback;
|
|
|
|
xfer->request = *req;
|
|
|
|
xfer->rqflags |= URQ_REQUEST;
|
|
|
|
xfer->nframes = 0;
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
void
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_setup_isoc_xfer(xfer, pipe, priv, frlengths, nframes, flags, callback)
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_xfer_handle xfer;
|
1999-10-07 19:26:38 +00:00
|
|
|
usbd_pipe_handle pipe;
|
|
|
|
usbd_private_handle priv;
|
|
|
|
u_int16_t *frlengths;
|
|
|
|
u_int32_t nframes;
|
1999-11-17 22:33:51 +00:00
|
|
|
u_int16_t flags;
|
1999-10-07 19:26:38 +00:00
|
|
|
usbd_callback callback;
|
1998-11-26 23:13:13 +00:00
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
xfer->pipe = pipe;
|
|
|
|
xfer->priv = priv;
|
|
|
|
xfer->buffer = 0;
|
|
|
|
xfer->length = 0;
|
|
|
|
xfer->actlen = 0;
|
|
|
|
xfer->flags = flags;
|
|
|
|
xfer->timeout = USBD_NO_TIMEOUT;
|
|
|
|
xfer->status = USBD_NOT_STARTED;
|
|
|
|
xfer->callback = callback;
|
|
|
|
xfer->rqflags &= ~URQ_REQUEST;
|
|
|
|
xfer->frlengths = frlengths;
|
|
|
|
xfer->nframes = nframes;
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
void
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_get_xfer_status(xfer, priv, buffer, count, status)
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_xfer_handle xfer;
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_private_handle *priv;
|
|
|
|
void **buffer;
|
|
|
|
u_int32_t *count;
|
|
|
|
usbd_status *status;
|
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
if (priv != NULL)
|
|
|
|
*priv = xfer->priv;
|
|
|
|
if (buffer != NULL)
|
|
|
|
*buffer = xfer->buffer;
|
|
|
|
if (count != NULL)
|
|
|
|
*count = xfer->actlen;
|
|
|
|
if (status != NULL)
|
|
|
|
*status = xfer->status;
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
usb_config_descriptor_t *
|
|
|
|
usbd_get_config_descriptor(dev)
|
|
|
|
usbd_device_handle dev;
|
|
|
|
{
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
#ifdef DIAGNOSTIC
|
|
|
|
if (dev == NULL) {
|
|
|
|
printf("usbd_get_config_descriptor: dev == NULL\n");
|
|
|
|
return (NULL);
|
|
|
|
}
|
|
|
|
#endif
|
1998-11-26 23:13:13 +00:00
|
|
|
return (dev->cdesc);
|
|
|
|
}
|
|
|
|
|
|
|
|
usb_interface_descriptor_t *
|
|
|
|
usbd_get_interface_descriptor(iface)
|
|
|
|
usbd_interface_handle iface;
|
|
|
|
{
|
More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
following improvements:
o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
quirk. This allows drivers to specify busy waiting only for
certain transfers (namely control transfers for reading/writing
registers and stuff).
o New USBD_FORCE_SHORT_XFER flag can be used to deal with
devices like the ADMtek Pegasus that sense the end of bulk OUT
transfers in a special way (if a transfer is exactly a multiple
of 64 bytes in size, you need to send an extra empty packet
to terminate the transfer).
o usbd_open_pipe_intr() now accepts an interval argument which
can be used to change the rate at which the interrupt callback
routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
value specified in the device's config data, but drivers can
override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
control transfers. We no longer force the non-tsleep hack for
bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
when a device has been detached, and use this flag to perform
tests to prevent the drivers from trying to do control transfers
if this is the case. This is necessary because calling if_detach()
with INET6 enabled will eventually result in a call to the driver's
ioctl() routine to delete the multicast groups on the interface,
which will result in attempts to perform control transfers. (It's
possible this also happens even without INET6 support enabled.) This
is pointless since we know that if the detach method has been called,
the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
to initialize the device states without trying to close and re-open the
pipes. This is partly because we don't want to frob things at interrupt
context, but also because this doesn't seem to work right and I don't
want to panic the system just because a USB device may have stopped
responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
transfer is needed. Unfortunately, the design of the chip makes it hard
to get this exactly right. Hopefully, this will go away once either
Nick or Lennart finds the bug in the uhci driver that makes this ugly
hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
|
|
|
#ifdef DIAGNOSTIC
|
|
|
|
if (iface == NULL) {
|
|
|
|
printf("usbd_get_interface_descriptor: dev == NULL\n");
|
|
|
|
return (NULL);
|
|
|
|
}
|
|
|
|
#endif
|
1998-11-26 23:13:13 +00:00
|
|
|
return (iface->idesc);
|
|
|
|
}
|
|
|
|
|
|
|
|
usb_device_descriptor_t *
|
|
|
|
usbd_get_device_descriptor(dev)
|
|
|
|
usbd_device_handle dev;
|
|
|
|
{
|
|
|
|
return (&dev->ddesc);
|
|
|
|
}
|
|
|
|
|
|
|
|
usb_endpoint_descriptor_t *
|
|
|
|
usbd_interface2endpoint_descriptor(iface, index)
|
|
|
|
usbd_interface_handle iface;
|
|
|
|
u_int8_t index;
|
|
|
|
{
|
|
|
|
if (index >= iface->idesc->bNumEndpoints)
|
1999-01-07 23:07:57 +00:00
|
|
|
return (0);
|
1998-11-26 23:13:13 +00:00
|
|
|
return (iface->endpoints[index].edesc);
|
|
|
|
}
|
|
|
|
|
|
|
|
usbd_status
|
|
|
|
usbd_abort_pipe(pipe)
|
|
|
|
usbd_pipe_handle pipe;
|
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_status err;
|
1998-11-26 23:13:13 +00:00
|
|
|
int s;
|
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
#ifdef DIAGNOSTIC
|
1999-11-17 22:33:51 +00:00
|
|
|
if (pipe == NULL) {
|
1999-10-07 19:26:38 +00:00
|
|
|
printf("usbd_close_pipe: pipe==NULL\n");
|
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
|
|
}
|
|
|
|
#endif
|
1998-11-26 23:13:13 +00:00
|
|
|
s = splusb();
|
1999-11-17 22:33:51 +00:00
|
|
|
err = usbd_ar_pipe(pipe);
|
1998-11-26 23:13:13 +00:00
|
|
|
splx(s);
|
1999-11-17 22:33:51 +00:00
|
|
|
return (err);
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
1999-10-07 19:26:38 +00:00
|
|
|
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_status
|
|
|
|
usbd_clear_endpoint_stall(pipe)
|
|
|
|
usbd_pipe_handle pipe;
|
|
|
|
{
|
|
|
|
usbd_device_handle dev = pipe->device;
|
|
|
|
usb_device_request_t req;
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_status err;
|
1998-11-26 23:13:13 +00:00
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
DPRINTFN(8, ("usbd_clear_endpoint_stall\n"));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Clearing en endpoint stall resets the enpoint toggle, so
|
|
|
|
* do the same to the HC toggle.
|
|
|
|
*/
|
|
|
|
pipe->methods->cleartoggle(pipe);
|
|
|
|
|
1998-11-26 23:13:13 +00:00
|
|
|
req.bmRequestType = UT_WRITE_ENDPOINT;
|
|
|
|
req.bRequest = UR_CLEAR_FEATURE;
|
1999-01-07 23:07:57 +00:00
|
|
|
USETW(req.wValue, UF_ENDPOINT_HALT);
|
1998-11-26 23:13:13 +00:00
|
|
|
USETW(req.wIndex, pipe->endpoint->edesc->bEndpointAddress);
|
|
|
|
USETW(req.wLength, 0);
|
1999-11-17 22:33:51 +00:00
|
|
|
err = usbd_do_request(dev, &req, 0);
|
1998-11-26 23:13:13 +00:00
|
|
|
#if 0
|
|
|
|
XXX should we do this?
|
1999-11-17 22:33:51 +00:00
|
|
|
if (!err) {
|
1998-11-26 23:13:13 +00:00
|
|
|
pipe->state = USBD_PIPE_ACTIVE;
|
|
|
|
/* XXX activate pipe */
|
|
|
|
}
|
|
|
|
#endif
|
1999-11-17 22:33:51 +00:00
|
|
|
return (err);
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
usbd_status
|
|
|
|
usbd_clear_endpoint_stall_async(pipe)
|
|
|
|
usbd_pipe_handle pipe;
|
|
|
|
{
|
|
|
|
usbd_device_handle dev = pipe->device;
|
|
|
|
usb_device_request_t req;
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_status err;
|
1998-11-26 23:13:13 +00:00
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
pipe->methods->cleartoggle(pipe);
|
|
|
|
|
1998-11-26 23:13:13 +00:00
|
|
|
req.bmRequestType = UT_WRITE_ENDPOINT;
|
|
|
|
req.bRequest = UR_CLEAR_FEATURE;
|
1999-01-07 23:07:57 +00:00
|
|
|
USETW(req.wValue, UF_ENDPOINT_HALT);
|
1998-11-26 23:13:13 +00:00
|
|
|
USETW(req.wIndex, pipe->endpoint->edesc->bEndpointAddress);
|
|
|
|
USETW(req.wLength, 0);
|
1999-11-17 22:33:51 +00:00
|
|
|
err = usbd_do_request_async(dev, &req, 0);
|
|
|
|
return (err);
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
2000-01-25 18:40:39 +00:00
|
|
|
void
|
|
|
|
usbd_clear_endpoint_toggle(pipe)
|
|
|
|
usbd_pipe_handle pipe;
|
|
|
|
{
|
|
|
|
pipe->methods->cleartoggle(pipe);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_status
|
|
|
|
usbd_endpoint_count(iface, count)
|
|
|
|
usbd_interface_handle iface;
|
|
|
|
u_int8_t *count;
|
|
|
|
{
|
|
|
|
*count = iface->idesc->bNumEndpoints;
|
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
|
|
}
|
|
|
|
|
|
|
|
usbd_status
|
|
|
|
usbd_interface_count(dev, count)
|
|
|
|
usbd_device_handle dev;
|
|
|
|
u_int8_t *count;
|
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
if (dev->cdesc == NULL)
|
1998-11-26 23:13:13 +00:00
|
|
|
return (USBD_NOT_CONFIGURED);
|
|
|
|
*count = dev->cdesc->bNumInterface;
|
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
|
|
}
|
|
|
|
|
|
|
|
usbd_status
|
|
|
|
usbd_interface2device_handle(iface, dev)
|
|
|
|
usbd_interface_handle iface;
|
|
|
|
usbd_device_handle *dev;
|
|
|
|
{
|
|
|
|
*dev = iface->device;
|
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
|
|
}
|
|
|
|
|
|
|
|
usbd_status
|
|
|
|
usbd_device2interface_handle(dev, ifaceno, iface)
|
|
|
|
usbd_device_handle dev;
|
|
|
|
u_int8_t ifaceno;
|
|
|
|
usbd_interface_handle *iface;
|
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
if (dev->cdesc == NULL)
|
1998-11-26 23:13:13 +00:00
|
|
|
return (USBD_NOT_CONFIGURED);
|
|
|
|
if (ifaceno >= dev->cdesc->bNumInterface)
|
|
|
|
return (USBD_INVAL);
|
|
|
|
*iface = &dev->ifaces[ifaceno];
|
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
|
|
}
|
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
usbd_device_handle
|
|
|
|
usbd_pipe2device_handle(pipe)
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_pipe_handle pipe;
|
|
|
|
{
|
1999-10-07 19:26:38 +00:00
|
|
|
return (pipe->device);
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
1999-01-07 23:07:57 +00:00
|
|
|
/* XXXX use altno */
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_status
|
1999-01-07 23:07:57 +00:00
|
|
|
usbd_set_interface(iface, altidx)
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_interface_handle iface;
|
1999-01-07 23:07:57 +00:00
|
|
|
int altidx;
|
1998-11-26 23:13:13 +00:00
|
|
|
{
|
|
|
|
usb_device_request_t req;
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_status err;
|
1999-01-07 23:07:57 +00:00
|
|
|
|
|
|
|
if (LIST_FIRST(&iface->pipes) != 0)
|
|
|
|
return (USBD_IN_USE);
|
|
|
|
|
|
|
|
if (iface->endpoints)
|
|
|
|
free(iface->endpoints, M_USB);
|
|
|
|
iface->endpoints = 0;
|
|
|
|
iface->idesc = 0;
|
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
err = usbd_fill_iface_data(iface->device, iface->index, altidx);
|
|
|
|
if (err)
|
|
|
|
return (err);
|
1998-11-26 23:13:13 +00:00
|
|
|
|
|
|
|
req.bmRequestType = UT_WRITE_INTERFACE;
|
|
|
|
req.bRequest = UR_SET_INTERFACE;
|
1999-01-07 23:07:57 +00:00
|
|
|
USETW(req.wValue, iface->idesc->bAlternateSetting);
|
|
|
|
USETW(req.wIndex, iface->idesc->bInterfaceNumber);
|
1998-11-26 23:13:13 +00:00
|
|
|
USETW(req.wLength, 0);
|
1999-11-17 22:33:51 +00:00
|
|
|
return (usbd_do_request(iface->device, &req, 0));
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
1999-01-07 23:07:57 +00:00
|
|
|
int
|
|
|
|
usbd_get_no_alts(cdesc, ifaceno)
|
|
|
|
usb_config_descriptor_t *cdesc;
|
|
|
|
int ifaceno;
|
|
|
|
{
|
|
|
|
char *p = (char *)cdesc;
|
|
|
|
char *end = p + UGETW(cdesc->wTotalLength);
|
|
|
|
usb_interface_descriptor_t *d;
|
|
|
|
int n;
|
|
|
|
|
|
|
|
for (n = 0; p < end; p += d->bLength) {
|
|
|
|
d = (usb_interface_descriptor_t *)p;
|
|
|
|
if (p + d->bLength <= end &&
|
|
|
|
d->bDescriptorType == UDESC_INTERFACE &&
|
|
|
|
d->bInterfaceNumber == ifaceno)
|
|
|
|
n++;
|
|
|
|
}
|
|
|
|
return (n);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
usbd_get_interface_altindex(iface)
|
|
|
|
usbd_interface_handle iface;
|
|
|
|
{
|
|
|
|
return (iface->altindex);
|
|
|
|
}
|
|
|
|
|
|
|
|
usbd_status
|
|
|
|
usbd_get_interface(iface, aiface)
|
|
|
|
usbd_interface_handle iface;
|
|
|
|
u_int8_t *aiface;
|
|
|
|
{
|
|
|
|
usb_device_request_t req;
|
|
|
|
|
|
|
|
req.bmRequestType = UT_READ_INTERFACE;
|
|
|
|
req.bRequest = UR_GET_INTERFACE;
|
|
|
|
USETW(req.wValue, 0);
|
|
|
|
USETW(req.wIndex, iface->idesc->bInterfaceNumber);
|
|
|
|
USETW(req.wLength, 1);
|
1999-11-17 22:33:51 +00:00
|
|
|
return (usbd_do_request(iface->device, &req, aiface));
|
1999-01-07 23:07:57 +00:00
|
|
|
}
|
|
|
|
|
1998-11-26 23:13:13 +00:00
|
|
|
/*** Internal routines ***/
|
|
|
|
|
|
|
|
/* Dequeue all pipe operations, called at splusb(). */
|
2000-04-03 20:58:30 +00:00
|
|
|
Static usbd_status
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_ar_pipe(pipe)
|
|
|
|
usbd_pipe_handle pipe;
|
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_xfer_handle xfer;
|
|
|
|
|
|
|
|
SPLUSBCHECK;
|
1998-11-26 23:13:13 +00:00
|
|
|
|
1999-10-07 19:26:38 +00:00
|
|
|
DPRINTFN(2,("usbd_ar_pipe: pipe=%p\n", pipe));
|
|
|
|
#ifdef USB_DEBUG
|
|
|
|
if (usbdebug > 5)
|
|
|
|
usbd_dump_queue(pipe);
|
|
|
|
#endif
|
1999-11-17 22:33:51 +00:00
|
|
|
pipe->repeat = 0;
|
|
|
|
while ((xfer = SIMPLEQ_FIRST(&pipe->queue)) != NULL) {
|
|
|
|
DPRINTFN(2,("usbd_ar_pipe: pipe=%p xfer=%p (methods=%p)\n",
|
|
|
|
pipe, xfer, pipe->methods));
|
1999-10-07 19:26:38 +00:00
|
|
|
/* Make the HC abort it (and invoke the callback). */
|
1999-11-17 22:33:51 +00:00
|
|
|
pipe->methods->abort(xfer);
|
1999-10-07 19:26:38 +00:00
|
|
|
/* XXX only for non-0 usbd_clear_endpoint_stall(pipe); */
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
|
|
}
|
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
/* Called at splusb() */
|
1999-10-07 19:26:38 +00:00
|
|
|
void
|
1999-11-17 22:33:51 +00:00
|
|
|
usb_transfer_complete(xfer)
|
|
|
|
usbd_xfer_handle xfer;
|
1998-11-26 23:13:13 +00:00
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_pipe_handle pipe = xfer->pipe;
|
|
|
|
usb_dma_t *dmap = &xfer->dmabuf;
|
|
|
|
int repeat = pipe->repeat;
|
1999-10-07 19:26:38 +00:00
|
|
|
int polling;
|
1998-11-26 23:13:13 +00:00
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
SPLUSBCHECK;
|
|
|
|
|
|
|
|
DPRINTFN(5, ("usb_transfer_complete: pipe=%p xfer=%p status=%d "
|
|
|
|
"actlen=%d\n", pipe, xfer, xfer->status, xfer->actlen));
|
1999-10-07 19:26:38 +00:00
|
|
|
|
|
|
|
#ifdef DIAGNOSTIC
|
1999-11-17 22:33:51 +00:00
|
|
|
if (pipe == NULL) {
|
|
|
|
printf("usbd_transfer_cb: pipe==0, xfer=%p\n", xfer);
|
1999-10-07 19:26:38 +00:00
|
|
|
return;
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
1999-10-07 19:26:38 +00:00
|
|
|
#endif
|
|
|
|
polling = pipe->device->bus->use_polling;
|
|
|
|
/* XXXX */
|
|
|
|
if (polling)
|
|
|
|
pipe->running = 0;
|
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
if (!(xfer->flags & USBD_NO_COPY) && xfer->actlen != 0 &&
|
|
|
|
usbd_xfer_isread(xfer)) {
|
|
|
|
#ifdef DIAGNOSTIC
|
|
|
|
if (xfer->actlen > xfer->length) {
|
|
|
|
printf("usb_transfer_complete: actlen > len %d > %d\n",
|
|
|
|
xfer->actlen, xfer->length);
|
|
|
|
xfer->actlen = xfer->length;
|
|
|
|
}
|
|
|
|
#endif
|
2000-02-10 18:50:19 +00:00
|
|
|
memcpy(xfer->buffer, KERNADDR(dmap, 0), xfer->actlen);
|
1999-11-17 22:33:51 +00:00
|
|
|
}
|
1999-10-07 19:26:38 +00:00
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
/* if we allocated the buffer in usbd_transfer() we free it here. */
|
|
|
|
if (xfer->rqflags & URQ_AUTO_DMABUF) {
|
|
|
|
if (!repeat) {
|
1999-10-07 19:26:38 +00:00
|
|
|
struct usbd_bus *bus = pipe->device->bus;
|
|
|
|
bus->methods->freem(bus, dmap);
|
1999-11-17 22:33:51 +00:00
|
|
|
xfer->rqflags &= ~URQ_AUTO_DMABUF;
|
1999-10-07 19:26:38 +00:00
|
|
|
}
|
|
|
|
}
|
1998-11-26 23:13:13 +00:00
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
if (pipe->methods->done != NULL)
|
|
|
|
pipe->methods->done(xfer);
|
1998-11-26 23:13:13 +00:00
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
if (!repeat) {
|
|
|
|
/* Remove request from queue. */
|
|
|
|
#ifdef DIAGNOSTIC
|
|
|
|
if (xfer != SIMPLEQ_FIRST(&pipe->queue))
|
|
|
|
printf("usb_transfer_complete: bad dequeue %p != %p\n",
|
|
|
|
xfer, SIMPLEQ_FIRST(&pipe->queue));
|
|
|
|
#endif
|
|
|
|
SIMPLEQ_REMOVE_HEAD(&pipe->queue, xfer, next);
|
|
|
|
}
|
1998-11-26 23:13:13 +00:00
|
|
|
|
|
|
|
/* Count completed transfers. */
|
2002-02-20 20:47:21 +00:00
|
|
|
++pipe->device->bus->stats.uds_requests
|
1999-10-07 19:26:38 +00:00
|
|
|
[pipe->endpoint->edesc->bmAttributes & UE_XFERTYPE];
|
1998-11-26 23:13:13 +00:00
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
xfer->done = 1;
|
1999-11-28 21:01:06 +00:00
|
|
|
if (!xfer->status && xfer->actlen < xfer->length &&
|
1999-11-17 22:33:51 +00:00
|
|
|
!(xfer->flags & USBD_SHORT_XFER_OK)) {
|
1999-11-28 21:01:06 +00:00
|
|
|
DPRINTFN(-1,("usbd_transfer_cb: short transfer %d<%d\n",
|
|
|
|
xfer->actlen, xfer->length));
|
1999-11-17 22:33:51 +00:00
|
|
|
xfer->status = USBD_SHORT_XFER;
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
1999-10-07 19:26:38 +00:00
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
if (xfer->callback)
|
|
|
|
xfer->callback(xfer, xfer->priv, xfer->status);
|
1998-11-26 23:13:13 +00:00
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
if ((xfer->flags & USBD_SYNCHRONOUS) && !polling)
|
|
|
|
wakeup(xfer);
|
1999-10-07 19:26:38 +00:00
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
if (!repeat) {
|
|
|
|
/* XXX should we stop the queue on all errors? */
|
2000-03-15 22:09:53 +00:00
|
|
|
if ((xfer->status == USBD_CANCELLED
|
|
|
|
|| xfer->status == USBD_TIMEOUT)
|
|
|
|
&& pipe->iface != NULL) /* not control pipe */
|
1999-11-17 22:33:51 +00:00
|
|
|
pipe->running = 0;
|
|
|
|
else
|
|
|
|
usbd_start_next(pipe);
|
|
|
|
}
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
usbd_status
|
1999-11-17 22:33:51 +00:00
|
|
|
usb_insert_transfer(xfer)
|
|
|
|
usbd_xfer_handle xfer;
|
1998-11-26 23:13:13 +00:00
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_pipe_handle pipe = xfer->pipe;
|
|
|
|
usbd_status err;
|
1998-11-26 23:13:13 +00:00
|
|
|
int s;
|
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
DPRINTFN(5,("usb_insert_transfer: pipe=%p running=%d timeout=%d\n",
|
|
|
|
pipe, pipe->running, xfer->timeout));
|
1998-11-26 23:13:13 +00:00
|
|
|
s = splusb();
|
1999-11-17 22:33:51 +00:00
|
|
|
SIMPLEQ_INSERT_TAIL(&pipe->queue, xfer, next);
|
1999-10-07 19:26:38 +00:00
|
|
|
if (pipe->running)
|
1999-11-17 22:33:51 +00:00
|
|
|
err = USBD_IN_PROGRESS;
|
1999-10-07 19:26:38 +00:00
|
|
|
else {
|
|
|
|
pipe->running = 1;
|
1999-11-17 22:33:51 +00:00
|
|
|
err = USBD_NORMAL_COMPLETION;
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
splx(s);
|
1999-11-17 22:33:51 +00:00
|
|
|
return (err);
|
1999-10-07 19:26:38 +00:00
|
|
|
}
|
|
|
|
|
1999-11-17 22:33:51 +00:00
|
|
|
/* Called at splusb() */
|
1999-10-07 19:26:38 +00:00
|
|
|
void
|
|
|
|
usbd_start_next(pipe)
|
|
|
|
usbd_pipe_handle pipe;
|
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_xfer_handle xfer;
|
|
|
|
usbd_status err;
|
|
|
|
|
|
|
|
SPLUSBCHECK;
|
1999-10-07 19:26:38 +00:00
|
|
|
|
|
|
|
#ifdef DIAGNOSTIC
|
1999-11-17 22:33:51 +00:00
|
|
|
if (pipe == NULL) {
|
|
|
|
printf("usbd_start_next: pipe == NULL\n");
|
1999-10-07 19:26:38 +00:00
|
|
|
return;
|
|
|
|
}
|
1999-11-17 22:33:51 +00:00
|
|
|
if (pipe->methods == NULL || pipe->methods->start == NULL) {
|
|
|
|
printf("usbd_start_next: pipe=%p no start method\n", pipe);
|
1999-10-07 19:26:38 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* Get next request in queue. */
|
1999-11-17 22:33:51 +00:00
|
|
|
xfer = SIMPLEQ_FIRST(&pipe->queue);
|
|
|
|
DPRINTFN(5, ("usbd_start_next: pipe=%p, xfer=%p\n", pipe, xfer));
|
|
|
|
if (xfer == NULL) {
|
1999-10-07 19:26:38 +00:00
|
|
|
pipe->running = 0;
|
1999-11-17 22:33:51 +00:00
|
|
|
} else {
|
|
|
|
err = pipe->methods->start(xfer);
|
|
|
|
if (err != USBD_IN_PROGRESS) {
|
|
|
|
printf("usbd_start_next: error=%d\n", err);
|
1999-10-07 19:26:38 +00:00
|
|
|
pipe->running = 0;
|
|
|
|
/* XXX do what? */
|
|
|
|
}
|
|
|
|
}
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
usbd_status
|
|
|
|
usbd_do_request(dev, req, data)
|
|
|
|
usbd_device_handle dev;
|
|
|
|
usb_device_request_t *req;
|
|
|
|
void *data;
|
1999-01-07 23:07:57 +00:00
|
|
|
{
|
|
|
|
return (usbd_do_request_flags(dev, req, data, 0, 0));
|
|
|
|
}
|
|
|
|
|
|
|
|
usbd_status
|
|
|
|
usbd_do_request_flags(dev, req, data, flags, actlen)
|
|
|
|
usbd_device_handle dev;
|
|
|
|
usb_device_request_t *req;
|
|
|
|
void *data;
|
|
|
|
u_int16_t flags;
|
|
|
|
int *actlen;
|
1998-11-26 23:13:13 +00:00
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_xfer_handle xfer;
|
|
|
|
usbd_status err;
|
1998-11-26 23:13:13 +00:00
|
|
|
|
|
|
|
#ifdef DIAGNOSTIC
|
1999-11-28 21:01:06 +00:00
|
|
|
#if defined(__i386__) && defined(__FreeBSD__)
|
2001-09-12 08:38:13 +00:00
|
|
|
KASSERT(curthread->td_intr_nesting_level == 0,
|
2000-03-15 22:09:53 +00:00
|
|
|
("usbd_do_request: in interrupt context"));
|
1999-11-17 22:33:51 +00:00
|
|
|
#endif
|
|
|
|
if (dev->bus->intr_context) {
|
1998-11-26 23:13:13 +00:00
|
|
|
printf("usbd_do_request: not in process context\n");
|
1999-10-07 19:26:38 +00:00
|
|
|
return (USBD_INVAL);
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
1999-11-28 21:01:06 +00:00
|
|
|
xfer = usbd_alloc_xfer(dev);
|
1999-11-17 22:33:51 +00:00
|
|
|
if (xfer == NULL)
|
1998-11-26 23:13:13 +00:00
|
|
|
return (USBD_NOMEM);
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_setup_default_xfer(xfer, dev, 0, USBD_DEFAULT_TIMEOUT, req,
|
1999-10-07 19:26:38 +00:00
|
|
|
data, UGETW(req->wLength), flags, 0);
|
1999-11-17 22:33:51 +00:00
|
|
|
err = usbd_sync_transfer(xfer);
|
1998-11-26 23:13:13 +00:00
|
|
|
#if defined(USB_DEBUG) || defined(DIAGNOSTIC)
|
1999-11-17 22:33:51 +00:00
|
|
|
if (xfer->actlen > xfer->length)
|
1999-10-07 19:26:38 +00:00
|
|
|
DPRINTF(("usbd_do_request: overrun addr=%d type=0x%02x req=0x"
|
|
|
|
"%02x val=%d index=%d rlen=%d length=%d actlen=%d\n",
|
1999-11-17 22:33:51 +00:00
|
|
|
dev->address, xfer->request.bmRequestType,
|
|
|
|
xfer->request.bRequest, UGETW(xfer->request.wValue),
|
|
|
|
UGETW(xfer->request.wIndex),
|
|
|
|
UGETW(xfer->request.wLength),
|
|
|
|
xfer->length, xfer->actlen));
|
1998-11-26 23:13:13 +00:00
|
|
|
#endif
|
1999-11-17 22:33:51 +00:00
|
|
|
if (actlen != NULL)
|
|
|
|
*actlen = xfer->actlen;
|
|
|
|
if (err == USBD_STALLED) {
|
1999-01-07 23:07:57 +00:00
|
|
|
/*
|
|
|
|
* The control endpoint has stalled. Control endpoints
|
|
|
|
* should not halt, but some may do so anyway so clear
|
|
|
|
* any halt condition.
|
|
|
|
*/
|
|
|
|
usb_device_request_t treq;
|
|
|
|
usb_status_t status;
|
|
|
|
u_int16_t s;
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_status nerr;
|
1999-01-07 23:07:57 +00:00
|
|
|
|
|
|
|
treq.bmRequestType = UT_READ_ENDPOINT;
|
|
|
|
treq.bRequest = UR_GET_STATUS;
|
|
|
|
USETW(treq.wValue, 0);
|
|
|
|
USETW(treq.wIndex, 0);
|
|
|
|
USETW(treq.wLength, sizeof(usb_status_t));
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_setup_default_xfer(xfer, dev, 0, USBD_DEFAULT_TIMEOUT,
|
1999-10-07 19:26:38 +00:00
|
|
|
&treq, &status,sizeof(usb_status_t),
|
|
|
|
0, 0);
|
1999-11-17 22:33:51 +00:00
|
|
|
nerr = usbd_sync_transfer(xfer);
|
|
|
|
if (nerr)
|
1999-01-07 23:07:57 +00:00
|
|
|
goto bad;
|
|
|
|
s = UGETW(status.wStatus);
|
|
|
|
DPRINTF(("usbd_do_request: status = 0x%04x\n", s));
|
|
|
|
if (!(s & UES_HALT))
|
|
|
|
goto bad;
|
|
|
|
treq.bmRequestType = UT_WRITE_ENDPOINT;
|
|
|
|
treq.bRequest = UR_CLEAR_FEATURE;
|
|
|
|
USETW(treq.wValue, UF_ENDPOINT_HALT);
|
|
|
|
USETW(treq.wIndex, 0);
|
|
|
|
USETW(treq.wLength, 0);
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_setup_default_xfer(xfer, dev, 0, USBD_DEFAULT_TIMEOUT,
|
1999-10-07 19:26:38 +00:00
|
|
|
&treq, &status, 0, 0, 0);
|
1999-11-17 22:33:51 +00:00
|
|
|
nerr = usbd_sync_transfer(xfer);
|
|
|
|
if (nerr)
|
1999-01-07 23:07:57 +00:00
|
|
|
goto bad;
|
|
|
|
}
|
|
|
|
|
|
|
|
bad:
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_free_xfer(xfer);
|
1999-11-17 22:33:51 +00:00
|
|
|
return (err);
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_do_request_async_cb(xfer, priv, status)
|
|
|
|
usbd_xfer_handle xfer;
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_private_handle priv;
|
|
|
|
usbd_status status;
|
|
|
|
{
|
|
|
|
#if defined(USB_DEBUG) || defined(DIAGNOSTIC)
|
1999-11-17 22:33:51 +00:00
|
|
|
if (xfer->actlen > xfer->length)
|
1999-10-07 19:26:38 +00:00
|
|
|
DPRINTF(("usbd_do_request: overrun addr=%d type=0x%02x req=0x"
|
|
|
|
"%02x val=%d index=%d rlen=%d length=%d actlen=%d\n",
|
1999-11-17 22:33:51 +00:00
|
|
|
xfer->pipe->device->address,
|
|
|
|
xfer->request.bmRequestType,
|
|
|
|
xfer->request.bRequest, UGETW(xfer->request.wValue),
|
|
|
|
UGETW(xfer->request.wIndex),
|
|
|
|
UGETW(xfer->request.wLength),
|
|
|
|
xfer->length, xfer->actlen));
|
1998-11-26 23:13:13 +00:00
|
|
|
#endif
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_free_xfer(xfer);
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Execute a request without waiting for completion.
|
|
|
|
* Can be used from interrupt context.
|
|
|
|
*/
|
|
|
|
usbd_status
|
|
|
|
usbd_do_request_async(dev, req, data)
|
|
|
|
usbd_device_handle dev;
|
|
|
|
usb_device_request_t *req;
|
|
|
|
void *data;
|
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
usbd_xfer_handle xfer;
|
|
|
|
usbd_status err;
|
1998-11-26 23:13:13 +00:00
|
|
|
|
1999-11-28 21:01:06 +00:00
|
|
|
xfer = usbd_alloc_xfer(dev);
|
1999-11-17 22:33:51 +00:00
|
|
|
if (xfer == NULL)
|
1998-11-26 23:13:13 +00:00
|
|
|
return (USBD_NOMEM);
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_setup_default_xfer(xfer, dev, 0, USBD_DEFAULT_TIMEOUT, req,
|
1999-11-17 22:33:51 +00:00
|
|
|
data, UGETW(req->wLength), 0, usbd_do_request_async_cb);
|
|
|
|
err = usbd_transfer(xfer);
|
|
|
|
if (err != USBD_IN_PROGRESS) {
|
1999-11-28 21:01:06 +00:00
|
|
|
usbd_free_xfer(xfer);
|
1999-11-17 22:33:51 +00:00
|
|
|
return (err);
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
|
|
}
|
|
|
|
|
2001-07-05 10:12:59 +00:00
|
|
|
const struct usbd_quirks *
|
1998-11-26 23:13:13 +00:00
|
|
|
usbd_get_quirks(dev)
|
|
|
|
usbd_device_handle dev;
|
|
|
|
{
|
|
|
|
return (dev->quirks);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* XXX do periodic free() of free list */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Called from keyboard driver when in polling mode.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
usbd_dopoll(iface)
|
|
|
|
usbd_interface_handle iface;
|
|
|
|
{
|
1999-10-07 19:26:38 +00:00
|
|
|
iface->device->bus->methods->do_poll(iface->device->bus);
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
usbd_set_polling(iface, on)
|
|
|
|
usbd_interface_handle iface;
|
|
|
|
int on;
|
|
|
|
{
|
1999-11-17 22:33:51 +00:00
|
|
|
if (on)
|
|
|
|
iface->device->bus->use_polling++;
|
|
|
|
else
|
|
|
|
iface->device->bus->use_polling--;
|
1998-11-26 23:13:13 +00:00
|
|
|
}
|
1999-01-07 23:07:57 +00:00
|
|
|
|
|
|
|
|
|
|
|
usb_endpoint_descriptor_t *
|
|
|
|
usbd_get_endpoint_descriptor(iface, address)
|
|
|
|
usbd_interface_handle iface;
|
|
|
|
u_int8_t address;
|
|
|
|
{
|
|
|
|
struct usbd_endpoint *ep;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < iface->idesc->bNumEndpoints; i++) {
|
|
|
|
ep = &iface->endpoints[i];
|
|
|
|
if (ep->edesc->bEndpointAddress == address)
|
|
|
|
return (iface->endpoints[i].edesc);
|
|
|
|
}
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
2002-02-11 10:09:29 +00:00
|
|
|
/*
|
|
|
|
* Search for a vendor/product pair in an array. The item size is
|
|
|
|
* given as an argument.
|
|
|
|
*/
|
|
|
|
const struct usb_devno *
|
|
|
|
usb_match_device(const struct usb_devno *tbl, u_int nentries, u_int sz,
|
|
|
|
u_int16_t vendor, u_int16_t product)
|
|
|
|
{
|
|
|
|
while (nentries-- > 0) {
|
|
|
|
if (tbl->ud_vendor == vendor && tbl->ud_product == product)
|
|
|
|
return (tbl);
|
|
|
|
tbl = (const struct usb_devno *)((const char *)tbl + sz);
|
|
|
|
}
|
|
|
|
return (NULL);
|
|
|
|
}
|
|
|
|
|
1999-01-07 23:07:57 +00:00
|
|
|
#if defined(__FreeBSD__)
|
1999-07-29 01:03:04 +00:00
|
|
|
int
|
1999-01-07 23:07:57 +00:00
|
|
|
usbd_driver_load(module_t mod, int what, void *arg)
|
|
|
|
{
|
1999-10-07 19:26:38 +00:00
|
|
|
/* XXX should implement something like a function that removes all generic devices */
|
1999-11-17 22:33:51 +00:00
|
|
|
|
|
|
|
return (0);
|
1999-01-07 23:07:57 +00:00
|
|
|
}
|
1999-11-17 22:33:51 +00:00
|
|
|
|
1999-01-07 23:07:57 +00:00
|
|
|
#endif
|