freebsd-skq/sys/dev/twa/tw_cl_share.h

604 lines
18 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004-07 Applied Micro Circuits Corporation.
* Copyright (c) 2004-05 Vinod Kashyap
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* AMCC'S 3ware driver for 9000 series storage controllers.
*
* Author: Vinod Kashyap
* Modifications by: Adam Radford
* Modifications by: Manjunath Ranganathaiah
*/
#ifndef TW_CL_SHARE_H
#define TW_CL_SHARE_H
/*
* Macros, structures and functions shared between OSL and CL,
* and defined by CL.
*/
#define TW_CL_NULL ((TW_VOID *)0)
#define TW_CL_TRUE 1
#define TW_CL_FALSE 0
#define TW_CL_VENDOR_ID 0x13C1 /* 3ware vendor id */
#define TW_CL_DEVICE_ID_9K 0x1002 /* 9000 PCI series device id */
#define TW_CL_DEVICE_ID_9K_X 0x1003 /* 9000 PCI-X series device id */
#define TW_CL_DEVICE_ID_9K_E 0x1004 /* 9000 PCIe series device id */
#define TW_CL_DEVICE_ID_9K_SA 0x1005 /* 9000 PCIe SAS series device id */
#define TW_CL_BAR_TYPE_IO 1 /* I/O base address */
#define TW_CL_BAR_TYPE_MEM 2 /* memory base address */
#define TW_CL_BAR_TYPE_SBUF 3 /* SBUF base address */
#ifdef TW_OSL_ENCLOSURE_SUPPORT
#define TW_CL_MAX_NUM_UNITS 65 /* max # of units we support
-- enclosure target id is 64 */
#else /* TW_OSL_ENCLOSURE_SUPPORT */
#define TW_CL_MAX_NUM_UNITS 32 /* max # of units we support */
#endif /* TW_OSL_ENCLOSURE_SUPPORT */
#define TW_CL_MAX_NUM_LUNS 255 /* max # of LUN's we support */
#define TW_CL_MAX_IO_SIZE 0x20000 /* 128K */
/*
* Though we can support 256 simultaneous requests, we advertise as capable
* of supporting only 255, since we want to keep one CL internal request
* context packet always available for internal requests.
*/
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
#define TW_CL_MAX_SIMULTANEOUS_REQUESTS 256 /* max simult reqs supported */
#define TW_CL_MAX_32BIT_SG_ELEMENTS 109 /* max 32-bit sg elements */
#define TW_CL_MAX_64BIT_SG_ELEMENTS 72 /* max 64-bit sg elements */
/* Possible values of ctlr->flags */
#define TW_CL_64BIT_ADDRESSES (1<<0) /* 64 bit cmdpkt & SG addresses */
#define TW_CL_64BIT_SG_LENGTH (1<<1) /* 64 bit SG length */
#define TW_CL_START_CTLR_ONLY (1<<2) /* Start ctlr only */
#define TW_CL_STOP_CTLR_ONLY (1<<3) /* Stop ctlr only */
#define TW_CL_DEFERRED_INTR_USED (1<<5) /* OS Layer uses deferred intr */
/* Possible error values from the Common Layer. */
#define TW_CL_ERR_REQ_SUCCESS 0
#define TW_CL_ERR_REQ_GENERAL_FAILURE (1<<0)
#define TW_CL_ERR_REQ_INVALID_TARGET (1<<1)
#define TW_CL_ERR_REQ_INVALID_LUN (1<<2)
#define TW_CL_ERR_REQ_SCSI_ERROR (1<<3)
#define TW_CL_ERR_REQ_AUTO_SENSE_VALID (1<<4)
#define TW_CL_ERR_REQ_BUS_RESET (1<<5)
#define TW_CL_ERR_REQ_UNABLE_TO_SUBMIT_COMMAND (1<<6)
/* Possible values of req_pkt->flags */
#define TW_CL_REQ_RETRY_ON_BUSY (1<<0)
#define TW_CL_REQ_CALLBACK_FOR_SGLIST (1<<1)
#define TW_CL_MESSAGE_SOURCE_CONTROLLER_ERROR 3
#define TW_CL_MESSAGE_SOURCE_CONTROLLER_EVENT 4
#define TW_CL_MESSAGE_SOURCE_COMMON_LAYER_ERROR 21
#define TW_CL_MESSAGE_SOURCE_COMMON_LAYER_EVENT 22
#define TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER 5
#define TW_CL_MESSAGE_SOURCE_FREEBSD_OS 8
#define TW_CL_MESSAGE_SOURCE_WINDOWS_DRIVER 7
#define TW_CL_MESSAGE_SOURCE_WINDOWS_OS 10
#define TW_CL_SEVERITY_ERROR 0x1
#define TW_CL_SEVERITY_WARNING 0x2
#define TW_CL_SEVERITY_INFO 0x3
#define TW_CL_SEVERITY_DEBUG 0x4
#define TW_CL_SEVERITY_ERROR_STRING "ERROR"
#define TW_CL_SEVERITY_WARNING_STRING "WARNING"
#define TW_CL_SEVERITY_INFO_STRING "INFO"
#define TW_CL_SEVERITY_DEBUG_STRING "DEBUG"
/*
* Structure, a pointer to which is used as the controller handle in
* communications between the OS Layer and the Common Layer.
*/
struct tw_cl_ctlr_handle {
TW_VOID *osl_ctlr_ctxt; /* OSL's ctlr context */
TW_VOID *cl_ctlr_ctxt; /* CL's ctlr context */
};
/*
* Structure, a pointer to which is used as the request handle in
* communications between the OS Layer and the Common Layer.
*/
struct tw_cl_req_handle {
TW_VOID *osl_req_ctxt; /* OSL's request context */
TW_VOID *cl_req_ctxt; /* CL's request context */
Apply driver update from LSI. Many thanks to LSI for continuing to support FreeBSD. 1) Timeout ioctl command timeouts. Do not reset the controller if ioctl command completed successfully. 2) Remove G66_WORKAROUND code (this bug never shipped). 3) Remove unnecessary interrupt lock (intr_lock). 4) Timeout firmware handshake for PChip reset (don't wait forever). 5) Handle interrupts inline. 6) Unmask command interrupt ONLY when adding a command to the pending queue. 7) Mask command interrupt ONLY after removing the last command from the pending queue. 8) Remove TW_OSLI_DEFERRED_INTR_USED code. 9) Replace controller "state" with separate data fields to avoid races: TW_CLI_CTLR_STATE_ACTIVE ctlr->active TW_CLI_CTLR_STATE_INTR_ENABLED ctlr->interrupts_enabled TW_CLI_CTLR_STATE_INTERNAL_REQ_BUSY ctlr->internal_req_busy TW_CLI_CTLR_STATE_GET_MORE_AENS ctlr->get_more_aens TW_CLI_CTLR_STATE_RESET_IN_PROGRESS ctlr->reset_in_progress TW_CLI_CTLR_STATE_RESET_PHASE1_IN_PROGRESS ctlr->reset_phase1_in_progress 10) Fix "req" leak in twa_action() when simq is frozen and req is NOT null. 11) Replace softc "state" with separate data fields to avoid races: TW_OSLI_CTLR_STATE_OPEN sc->open TW_OSLI_CTLR_STATE_SIMQ_FROZEN sc->simq_frozen 12) Fix reference to TW_OSLI_REQ_FLAGS_IN_PROGRESS in tw_osl_complete_passthru() 13) Use correct CAM status values. Change CAM_REQ_CMP_ERR to CAM_REQ_INVALID. Remove use of CAM_RELEASE_SIMQ for physical data addresses. 14) Do not freeze/ release the simq with non I/O commands. When it is appropriate to temporarily freeze the simq with an I/O command use: xpt_freeze_simq(sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; otherwise use: xpt_freeze_simq(sim, 1); xpt_release_simq(sim, 1); Submitted by: Tom Couch <tom.couch lsi.com> PR: kern/147695 MFC after: 3 days
2010-06-09 21:40:38 +00:00
TW_UINT8 is_io; /* Only freeze/release simq for IOs */
};
/* Structure used to describe SCSI requests to CL. */
struct tw_cl_scsi_req_packet {
TW_UINT32 unit; /* unit # to send cmd to */
TW_UINT32 lun; /* LUN to send cmd to */
TW_UINT8 *cdb; /* ptr to SCSI cdb */
TW_UINT32 cdb_len; /* # of valid cdb bytes */
TW_UINT32 sense_len; /* # of bytes of valid sense info */
TW_UINT8 *sense_data; /* ptr to sense data, if any */
TW_UINT32 scsi_status; /* SCSI status returned by fw */
TW_UINT32 sgl_entries; /* # of SG descriptors */
TW_UINT8 *sg_list; /* ptr to SG list */
};
/* Structure used to describe pass through command packets to CL. */
struct tw_cl_passthru_req_packet {
TW_UINT8 *cmd_pkt; /* ptr to passthru cmd pkt */
TW_UINT32 cmd_pkt_length; /* size of cmd pkt */
TW_UINT32 sgl_entries; /* # of SG descriptors */
TW_UINT8 *sg_list; /* ptr to SG list */
};
/* Request packet submitted to the Common Layer, by the OS Layer. */
struct tw_cl_req_packet {
TW_UINT32 cmd; /* Common Layer cmd */
TW_UINT32 flags; /* flags describing request */
TW_UINT32 status; /* Common Layer returned status */
TW_VOID (*tw_osl_callback)(struct tw_cl_req_handle *req_handle);
/* OSL routine to be called by CL on req completion */
TW_VOID (*tw_osl_sgl_callback)(
struct tw_cl_req_handle *req_handle, TW_VOID *sg_list,
TW_UINT32 *num_sgl_entries);
/* OSL callback to get SG list. */
union {
struct tw_cl_scsi_req_packet scsi_req; /* SCSI req */
struct tw_cl_passthru_req_packet pt_req;/*Passthru req*/
} gen_req_pkt;
};
#pragma pack(1)
/*
* Packet that describes an AEN/error generated by the controller,
* Common Layer, or even the OS Layer.
*/
struct tw_cl_event_packet {
TW_UINT32 sequence_id;
TW_UINT32 time_stamp_sec;
TW_UINT16 aen_code;
TW_UINT8 severity;
TW_UINT8 retrieved;
TW_UINT8 repeat_count;
TW_UINT8 parameter_len;
TW_UINT8 parameter_data[98];
TW_UINT32 event_src;
TW_UINT8 severity_str[20];
};
#pragma pack()
/* Structure to link 2 adjacent elements in a list. */
struct tw_cl_link {
struct tw_cl_link *next;
struct tw_cl_link *prev;
};
#pragma pack(1)
/* Scatter/Gather list entry with 32 bit addresses. */
struct tw_cl_sg_desc32 {
TW_UINT32 address;
TW_UINT32 length;
};
/* Scatter/Gather list entry with 64 bit addresses. */
struct tw_cl_sg_desc64 {
TW_UINT64 address;
TW_UINT32 length;
};
#pragma pack()
/* Byte swap functions. Valid only if running on big endian platforms. */
#ifdef TW_OSL_BIG_ENDIAN
#define TW_CL_SWAP16_WITH_CAST(x) \
((x << 8) | (x >> 8))
#define TW_CL_SWAP32_WITH_CAST(x) \
((x << 24) | ((x << 8) & (0xFF0000)) | \
((x >> 8) & (0xFF00)) | (x >> 24))
#define TW_CL_SWAP64_WITH_CAST(x) \
((((TW_UINT64)(TW_CL_SWAP32(((TW_UINT32 *)(&(x)))[1]))) << 32) |\
((TW_UINT32)(TW_CL_SWAP32(((TW_UINT32 *)(&(x)))[0]))))
#else /* TW_OSL_BIG_ENDIAN */
#define TW_CL_SWAP16_WITH_CAST(x) x
#define TW_CL_SWAP32_WITH_CAST(x) x
#define TW_CL_SWAP64_WITH_CAST(x) x
#endif /* TW_OSL_BIG_ENDIAN */
#define TW_CL_SWAP16(x) TW_CL_SWAP16_WITH_CAST((TW_UINT16)(x))
#define TW_CL_SWAP32(x) TW_CL_SWAP32_WITH_CAST((TW_UINT32)(x))
#define TW_CL_SWAP64(x) TW_CL_SWAP64_WITH_CAST((TW_UINT64)(x))
/* Queue manipulation functions. */
/* Initialize a queue. */
#define TW_CL_Q_INIT(head) do { \
(head)->prev = (head)->next = head; \
} while (0)
/* Insert an item at the head of the queue. */
#define TW_CL_Q_INSERT_HEAD(head, item) do { \
(item)->next = (head)->next; \
(item)->prev = head; \
(head)->next->prev = item; \
(head)->next = item; \
} while (0)
/* Insert an item at the tail of the queue. */
#define TW_CL_Q_INSERT_TAIL(head, item) do { \
(item)->next = head; \
(item)->prev = (head)->prev; \
(head)->prev->next = item; \
(head)->prev = item; \
} while (0)
/* Remove an item from the head of the queue. */
#define TW_CL_Q_REMOVE_ITEM(head, item) do { \
(item)->prev->next = (item)->next; \
(item)->next->prev = (item)->prev; \
} while (0)
/* Retrieve the item at the head of the queue. */
#define TW_CL_Q_FIRST_ITEM(head) \
(((head)->next != head) ? ((head)->next) : TW_CL_NULL)
/* Retrieve the item at the tail of the queue. */
#define TW_CL_Q_LAST_ITEM(head) \
(((head)->prev != head) ? ((head)->prev) : TW_CL_NULL)
/* Retrieve the item next to a given item in the queue. */
#define TW_CL_Q_NEXT_ITEM(head, item) \
(((item)->next != head) ? ((item)->next) : TW_CL_NULL)
/* Retrieve the item previous to a given item in the queue. */
#define TW_CL_Q_PREV_ITEM(head, item) \
(((item)->prev != head) ? ((item)->prev) : TW_CL_NULL)
/* Determine the offset of a field from the head of the structure it is in. */
#define TW_CL_STRUCT_OFFSET(struct_type, field) \
(TW_INT8 *)(&((struct_type *)0)->field)
/*
* Determine the address of the head of a structure, given the address of a
* field within it.
*/
#define TW_CL_STRUCT_HEAD(addr, struct_type, field) \
(struct_type *)((TW_INT8 *)addr - \
TW_CL_STRUCT_OFFSET(struct_type, field))
#ifndef TW_BUILDING_API
#include "tw_osl_inline.h"
/*
* The following are extern declarations of OS Layer defined functions called
* by the Common Layer. If any function has been defined as a macro in
* tw_osl_share.h, we will not make the extern declaration here.
*/
#ifndef tw_osl_breakpoint
/* Allows setting breakpoints in the CL code for debugging purposes. */
extern TW_VOID tw_osl_breakpoint(TW_VOID);
#endif
#ifndef tw_osl_timeout
/* Start OS timeout() routine after controller reset sequence */
extern TW_VOID tw_osl_timeout(struct tw_cl_req_handle *req_handle);
#endif
#ifndef tw_osl_untimeout
/* Stop OS timeout() routine during controller reset sequence */
extern TW_VOID tw_osl_untimeout(struct tw_cl_req_handle *req_handle);
#endif
#ifndef tw_osl_cur_func
/* Text name of current function. */
extern TW_INT8 *tw_osl_cur_func(TW_VOID);
#endif
#ifdef TW_OSL_DEBUG
#ifndef tw_osl_dbg_printf
/* Print to syslog/event log/debug console, as applicable. */
extern TW_INT32 tw_osl_dbg_printf(struct tw_cl_ctlr_handle *ctlr_handle,
const TW_INT8 *fmt, ...);
#endif
#endif /* TW_OSL_DEBUG */
#ifndef tw_osl_delay
/* Cause a delay of usecs micro-seconds. */
extern TW_VOID tw_osl_delay(TW_INT32 usecs);
#endif
#ifndef tw_osl_destroy_lock
/* Create/initialize a lock for CL's use. */
extern TW_VOID tw_osl_destroy_lock(struct tw_cl_ctlr_handle *ctlr_handle,
TW_LOCK_HANDLE *lock);
#endif
#ifndef tw_osl_free_lock
/* Free a previously held lock. */
extern TW_VOID tw_osl_free_lock(struct tw_cl_ctlr_handle *ctlr_handle,
TW_LOCK_HANDLE *lock);
#endif
#ifndef tw_osl_get_local_time
/* Get local time. */
extern TW_TIME tw_osl_get_local_time(TW_VOID);
#endif
#ifndef tw_osl_get_lock
/* Acquire a lock. */
extern TW_VOID tw_osl_get_lock(struct tw_cl_ctlr_handle *ctlr_handle,
TW_LOCK_HANDLE *lock);
#endif
#ifndef tw_osl_init_lock
/* Create/initialize a lock for CL's use. */
extern TW_VOID tw_osl_init_lock(struct tw_cl_ctlr_handle *ctlr_handle,
TW_INT8 *lock_name, TW_LOCK_HANDLE *lock);
#endif
#ifndef tw_osl_memcpy
/* Copy 'size' bytes from 'src' to 'dest'. */
extern TW_VOID tw_osl_memcpy(TW_VOID *src, TW_VOID *dest, TW_INT32 size);
#endif
#ifndef tw_osl_memzero
/* Zero 'size' bytes starting at 'addr'. */
extern TW_VOID tw_osl_memzero(TW_VOID *addr, TW_INT32 size);
#endif
#ifndef tw_osl_notify_event
/* Notify OSL of a controller/CL (or even OSL) event. */
extern TW_VOID tw_osl_notify_event(struct tw_cl_ctlr_handle *ctlr_handle,
struct tw_cl_event_packet *event);
#endif
#ifdef TW_OSL_PCI_CONFIG_ACCESSIBLE
#ifndef tw_osl_read_pci_config
/* Read 'size' bytes from 'offset' in the PCI config space. */
extern TW_UINT32 tw_osl_read_pci_config(
struct tw_cl_ctlr_handle *ctlr_handle, TW_INT32 offset, TW_INT32 size);
#endif
#endif /* TW_OSL_PCI_CONFIG_ACCESSIBLE */
#ifndef tw_osl_read_reg
/* Read 'size' bytes at 'offset' from base address of this controller. */
extern TW_UINT32 tw_osl_read_reg(struct tw_cl_ctlr_handle *ctlr_handle,
TW_INT32 offset, TW_INT32 size);
#endif
#ifndef tw_osl_scan_bus
/* Request OSL for a bus scan. */
extern TW_VOID tw_osl_scan_bus(struct tw_cl_ctlr_handle *ctlr_handle);
#endif
#ifdef TW_OSL_CAN_SLEEP
#ifndef tw_osl_sleep
/* Sleep for 'timeout' ms or until woken up (by tw_osl_wakeup). */
extern TW_INT32 tw_osl_sleep(struct tw_cl_ctlr_handle *ctlr_handle,
TW_SLEEP_HANDLE *sleep_handle, TW_INT32 timeout);
#endif
#endif /* TW_OSL_CAN_SLEEP */
#ifndef tw_osl_sprintf
/* Standard sprintf. */
extern TW_INT32 tw_osl_sprintf(TW_INT8 *dest, const TW_INT8 *fmt, ...);
#endif
#ifndef tw_osl_strcpy
/* Copy string 'src' to 'dest'. */
extern TW_INT8 *tw_osl_strcpy(TW_INT8 *dest, TW_INT8 *src);
#endif
#ifndef tw_osl_strlen
/* Return length of string pointed at by 'str'. */
extern TW_INT32 tw_osl_strlen(TW_VOID *str);
#endif
#ifndef tw_osl_vsprintf
/* Standard vsprintf. */
extern TW_INT32 tw_osl_vsprintf(TW_INT8 *dest, const TW_INT8 *fmt, va_list ap);
#endif
#ifdef TW_OSL_CAN_SLEEP
#ifndef tw_osl_wakeup
/* Wake up a thread sleeping by a call to tw_osl_sleep. */
extern TW_VOID tw_osl_wakeup(struct tw_cl_ctlr_handle *ctlr_handle,
TW_SLEEP_HANDLE *sleep_handle);
#endif
#endif /* TW_OSL_CAN_SLEEP */
#ifdef TW_OSL_PCI_CONFIG_ACCESSIBLE
#ifndef tw_osl_write_pci_config
/* Write 'value' of 'size' bytes at 'offset' in the PCI config space. */
extern TW_VOID tw_osl_write_pci_config(struct tw_cl_ctlr_handle *ctlr_handle,
TW_INT32 offset, TW_INT32 value, TW_INT32 size);
#endif
#endif /* TW_OSL_PCI_CONFIG_ACCESSIBLE */
#ifndef tw_osl_write_reg
/*
* Write 'value' of 'size' (max 4) bytes at 'offset' from base address of
* this controller.
*/
extern TW_VOID tw_osl_write_reg(struct tw_cl_ctlr_handle *ctlr_handle,
TW_INT32 offset, TW_INT32 value, TW_INT32 size);
#endif
/* Functions in the Common Layer */
/* Creates and queues AEN's. Also notifies OS Layer. */
extern TW_VOID tw_cl_create_event(struct tw_cl_ctlr_handle *ctlr_handle,
TW_UINT8 queue_event, TW_UINT8 event_src, TW_UINT16 event_code,
TW_UINT8 severity, TW_UINT8 *severity_str, TW_UINT8 *event_desc,
TW_UINT8 *event_specific_desc, ...);
/* Indicates whether a ctlr is supported by CL. */
extern TW_INT32 tw_cl_ctlr_supported(TW_INT32 vendor_id, TW_INT32 device_id);
/* Submit a firmware cmd packet. */
extern TW_INT32 tw_cl_fw_passthru(struct tw_cl_ctlr_handle *ctlr_handle,
struct tw_cl_req_packet *req_pkt, struct tw_cl_req_handle *req_handle);
/* Find out how much memory CL needs. */
extern TW_INT32 tw_cl_get_mem_requirements(
struct tw_cl_ctlr_handle *ctlr_handle, TW_UINT32 flags,
TW_INT32 device_id, TW_INT32 max_simult_reqs, TW_INT32 max_aens,
TW_UINT32 *alignment, TW_UINT32 *sg_size_factor,
TW_UINT32 *non_dma_mem_size, TW_UINT32 *dma_mem_size
);
/* Return PCI BAR info. */
extern TW_INT32 tw_cl_get_pci_bar_info(TW_INT32 device_id, TW_INT32 bar_type,
TW_INT32 *bar_num, TW_INT32 *bar0_offset, TW_INT32 *bar_size);
/* Initialize Common Layer for a given controller. */
extern TW_INT32 tw_cl_init_ctlr(struct tw_cl_ctlr_handle *ctlr_handle,
TW_UINT32 flags, TW_INT32 device_id, TW_INT32 max_simult_reqs,
TW_INT32 max_aens, TW_VOID *non_dma_mem, TW_VOID *dma_mem,
TW_UINT64 dma_mem_phys
);
extern TW_VOID tw_cl_set_reset_needed(struct tw_cl_ctlr_handle *ctlr_handle);
extern TW_INT32 tw_cl_is_reset_needed(struct tw_cl_ctlr_handle *ctlr_handle);
extern TW_INT32 tw_cl_is_active(struct tw_cl_ctlr_handle *ctlr_handle);
/* CL's interrupt handler. */
extern TW_INT32 tw_cl_interrupt(struct tw_cl_ctlr_handle *ctlr_handle);
/* CL's ioctl handler. */
extern TW_INT32 tw_cl_ioctl(struct tw_cl_ctlr_handle *ctlr_handle,
u_long cmd, TW_VOID *buf);
#ifdef TW_OSL_DEBUG
/* Print CL's state/statistics for a controller. */
extern TW_VOID tw_cl_print_ctlr_stats(struct tw_cl_ctlr_handle *ctlr_handle);
/* Prints CL internal details of a given request. */
extern TW_VOID tw_cl_print_req_info(struct tw_cl_req_handle *req_handle);
#endif /* TW_OSL_DEBUG */
/* Soft reset controller. */
extern TW_INT32 tw_cl_reset_ctlr(struct tw_cl_ctlr_handle *ctlr_handle);
#ifdef TW_OSL_DEBUG
/* Reset CL's statistics for a controller. */
extern TW_VOID tw_cl_reset_stats(struct tw_cl_ctlr_handle *ctlr_handle);
#endif /* TW_OSL_DEBUG */
/* Stop a controller. */
extern TW_INT32 tw_cl_shutdown_ctlr(struct tw_cl_ctlr_handle *ctlr_handle,
TW_UINT32 flags);
/* Submit a SCSI I/O request. */
extern TW_INT32 tw_cl_start_io(struct tw_cl_ctlr_handle *ctlr_handle,
struct tw_cl_req_packet *req_pkt, struct tw_cl_req_handle *req_handle);
#endif /* TW_BUILDING_API */
#endif /* TW_CL_SHARE_H */