freebsd-skq/sys/ufs/ffs/ffs_softdep.c

6310 lines
183 KiB
C
Raw Normal View History

/*-
2000-06-22 00:29:53 +00:00
* Copyright 1998, 2000 Marshall Kirk McKusick. All Rights Reserved.
*
* The soft updates code is derived from the appendix of a University
* of Michigan technical report (Gregory R. Ganger and Yale N. Patt,
* "Soft Updates: A Solution to the Metadata Update Problem in File
* Systems", CSE-TR-254-95, August 1995).
*
2000-06-22 00:29:53 +00:00
* Further information about soft updates can be obtained from:
*
2000-06-22 00:29:53 +00:00
* Marshall Kirk McKusick http://www.mckusick.com/softdep/
* 1614 Oxford Street mckusick@mckusick.com
* Berkeley, CA 94709-1608 +1-510-843-9542
* USA
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY MARSHALL KIRK MCKUSICK ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL MARSHALL KIRK MCKUSICK BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
2000-06-22 00:29:53 +00:00
* from: @(#)ffs_softdep.c 9.59 (McKusick) 6/21/00
*/
2002-03-15 04:06:10 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* For now we want the safety net that the DEBUG flag provides.
*/
#ifndef DEBUG
#define DEBUG
#endif
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/bio.h>
#include <sys/buf.h>
#include <sys/kdb.h>
#include <sys/kthread.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mount.h>
#include <sys/mutex.h>
#include <sys/proc.h>
#include <sys/stat.h>
#include <sys/sysctl.h>
#include <sys/syslog.h>
#include <sys/vnode.h>
#include <sys/conf.h>
#include <ufs/ufs/dir.h>
#include <ufs/ufs/extattr.h>
#include <ufs/ufs/quota.h>
#include <ufs/ufs/inode.h>
#include <ufs/ufs/ufsmount.h>
#include <ufs/ffs/fs.h>
#include <ufs/ffs/softdep.h>
#include <ufs/ffs/ffs_extern.h>
#include <ufs/ufs/ufs_extern.h>
#include <vm/vm.h>
#include "opt_ffs.h"
#ifndef SOFTUPDATES
int
softdep_flushfiles(oldmnt, flags, td)
struct mount *oldmnt;
int flags;
struct thread *td;
{
panic("softdep_flushfiles called");
}
int
softdep_mount(devvp, mp, fs, cred)
struct vnode *devvp;
struct mount *mp;
struct fs *fs;
struct ucred *cred;
{
return (0);
}
void
softdep_initialize()
{
return;
}
void
softdep_uninitialize()
{
return;
}
void
softdep_setup_inomapdep(bp, ip, newinum)
struct buf *bp;
struct inode *ip;
ino_t newinum;
{
panic("softdep_setup_inomapdep called");
}
void
softdep_setup_blkmapdep(bp, mp, newblkno)
struct buf *bp;
struct mount *mp;
ufs2_daddr_t newblkno;
{
panic("softdep_setup_blkmapdep called");
}
void
softdep_setup_allocdirect(ip, lbn, newblkno, oldblkno, newsize, oldsize, bp)
struct inode *ip;
ufs_lbn_t lbn;
ufs2_daddr_t newblkno;
ufs2_daddr_t oldblkno;
long newsize;
long oldsize;
struct buf *bp;
{
panic("softdep_setup_allocdirect called");
}
void
softdep_setup_allocext(ip, lbn, newblkno, oldblkno, newsize, oldsize, bp)
struct inode *ip;
ufs_lbn_t lbn;
ufs2_daddr_t newblkno;
ufs2_daddr_t oldblkno;
long newsize;
long oldsize;
struct buf *bp;
{
panic("softdep_setup_allocext called");
}
void
softdep_setup_allocindir_page(ip, lbn, bp, ptrno, newblkno, oldblkno, nbp)
struct inode *ip;
ufs_lbn_t lbn;
struct buf *bp;
int ptrno;
ufs2_daddr_t newblkno;
ufs2_daddr_t oldblkno;
struct buf *nbp;
{
panic("softdep_setup_allocindir_page called");
}
void
softdep_setup_allocindir_meta(nbp, ip, bp, ptrno, newblkno)
struct buf *nbp;
struct inode *ip;
struct buf *bp;
int ptrno;
ufs2_daddr_t newblkno;
{
panic("softdep_setup_allocindir_meta called");
}
void
softdep_setup_freeblocks(ip, length, flags)
struct inode *ip;
off_t length;
int flags;
{
panic("softdep_setup_freeblocks called");
}
void
softdep_freefile(pvp, ino, mode)
struct vnode *pvp;
ino_t ino;
int mode;
{
panic("softdep_freefile called");
}
int
softdep_setup_directory_add(bp, dp, diroffset, newinum, newdirbp, isnewblk)
struct buf *bp;
struct inode *dp;
off_t diroffset;
ino_t newinum;
struct buf *newdirbp;
int isnewblk;
{
panic("softdep_setup_directory_add called");
}
void
softdep_change_directoryentry_offset(dp, base, oldloc, newloc, entrysize)
struct inode *dp;
caddr_t base;
caddr_t oldloc;
caddr_t newloc;
int entrysize;
{
panic("softdep_change_directoryentry_offset called");
}
void
softdep_setup_remove(bp, dp, ip, isrmdir)
struct buf *bp;
struct inode *dp;
struct inode *ip;
int isrmdir;
{
panic("softdep_setup_remove called");
}
void
softdep_setup_directory_change(bp, dp, ip, newinum, isrmdir)
struct buf *bp;
struct inode *dp;
struct inode *ip;
ino_t newinum;
int isrmdir;
{
panic("softdep_setup_directory_change called");
}
void
softdep_change_linkcnt(ip)
struct inode *ip;
{
panic("softdep_change_linkcnt called");
}
void
softdep_load_inodeblock(ip)
struct inode *ip;
{
panic("softdep_load_inodeblock called");
}
void
softdep_update_inodeblock(ip, bp, waitfor)
struct inode *ip;
struct buf *bp;
int waitfor;
{
panic("softdep_update_inodeblock called");
}
int
softdep_fsync(vp)
struct vnode *vp; /* the "in_core" copy of the inode */
{
return (0);
}
void
softdep_fsync_mountdev(vp)
struct vnode *vp;
{
return;
}
int
softdep_flushworklist(oldmnt, countp, td)
struct mount *oldmnt;
int *countp;
struct thread *td;
{
*countp = 0;
return (0);
}
int
softdep_sync_metadata(struct vnode *vp)
{
return (0);
}
int
softdep_slowdown(vp)
struct vnode *vp;
{
panic("softdep_slowdown called");
}
void
softdep_releasefile(ip)
struct inode *ip; /* inode with the zero effective link count */
{
panic("softdep_releasefile called");
}
int
softdep_request_cleanup(fs, vp)
struct fs *fs;
struct vnode *vp;
{
return (0);
}
int
softdep_check_suspend(struct mount *mp,
struct vnode *devvp,
int softdep_deps,
int softdep_accdeps,
int secondary_writes,
int secondary_accwrites)
{
struct bufobj *bo;
int error;
(void) softdep_deps,
(void) softdep_accdeps;
bo = &devvp->v_bufobj;
ASSERT_BO_LOCKED(bo);
MNT_ILOCK(mp);
while (mp->mnt_secondary_writes != 0) {
BO_UNLOCK(bo);
msleep(&mp->mnt_secondary_writes, MNT_MTX(mp),
(PUSER - 1) | PDROP, "secwr", 0);
BO_LOCK(bo);
MNT_ILOCK(mp);
}
/*
* Reasons for needing more work before suspend:
* - Dirty buffers on devvp.
* - Secondary writes occurred after start of vnode sync loop
*/
error = 0;
if (bo->bo_numoutput > 0 ||
bo->bo_dirty.bv_cnt > 0 ||
secondary_writes != 0 ||
mp->mnt_secondary_writes != 0 ||
secondary_accwrites != mp->mnt_secondary_accwrites)
error = EAGAIN;
BO_UNLOCK(bo);
return (error);
}
void
softdep_get_depcounts(struct mount *mp,
int *softdepactivep,
int *softdepactiveaccp)
{
(void) mp;
*softdepactivep = 0;
*softdepactiveaccp = 0;
}
#else
/*
* These definitions need to be adapted to the system to which
* this file is being ported.
*/
/*
* malloc types defined for the softdep system.
*/
2000-12-08 20:09:00 +00:00
static MALLOC_DEFINE(M_PAGEDEP, "pagedep","File page dependencies");
static MALLOC_DEFINE(M_INODEDEP, "inodedep","Inode dependencies");
static MALLOC_DEFINE(M_NEWBLK, "newblk","New block allocation");
static MALLOC_DEFINE(M_BMSAFEMAP, "bmsafemap","Block or frag allocated from cyl group map");
static MALLOC_DEFINE(M_ALLOCDIRECT, "allocdirect","Block or frag dependency for an inode");
static MALLOC_DEFINE(M_INDIRDEP, "indirdep","Indirect block dependencies");
static MALLOC_DEFINE(M_ALLOCINDIR, "allocindir","Block dependency for an indirect block");
static MALLOC_DEFINE(M_FREEFRAG, "freefrag","Previously used frag for an inode");
static MALLOC_DEFINE(M_FREEBLKS, "freeblks","Blocks freed from an inode");
static MALLOC_DEFINE(M_FREEFILE, "freefile","Inode deallocated");
static MALLOC_DEFINE(M_DIRADD, "diradd","New directory entry");
static MALLOC_DEFINE(M_MKDIR, "mkdir","New directory");
static MALLOC_DEFINE(M_DIRREM, "dirrem","Directory entry deleted");
static MALLOC_DEFINE(M_NEWDIRBLK, "newdirblk","Unclaimed new directory block");
static MALLOC_DEFINE(M_SAVEDINO, "savedino","Saved inodes");
#define M_SOFTDEP_FLAGS (M_WAITOK | M_USE_RESERVE)
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
#define D_PAGEDEP 0
#define D_INODEDEP 1
#define D_NEWBLK 2
#define D_BMSAFEMAP 3
#define D_ALLOCDIRECT 4
#define D_INDIRDEP 5
#define D_ALLOCINDIR 6
#define D_FREEFRAG 7
#define D_FREEBLKS 8
#define D_FREEFILE 9
#define D_DIRADD 10
#define D_MKDIR 11
#define D_DIRREM 12
#define D_NEWDIRBLK 13
#define D_LAST D_NEWDIRBLK
/*
* translate from workitem type to memory type
* MUST match the defines above, such that memtype[D_XXX] == M_XXX
*/
static struct malloc_type *memtype[] = {
M_PAGEDEP,
M_INODEDEP,
M_NEWBLK,
M_BMSAFEMAP,
M_ALLOCDIRECT,
M_INDIRDEP,
M_ALLOCINDIR,
M_FREEFRAG,
M_FREEBLKS,
M_FREEFILE,
M_DIRADD,
M_MKDIR,
M_DIRREM,
M_NEWDIRBLK
};
#define DtoM(type) (memtype[type])
/*
* Names of malloc types.
*/
#define TYPENAME(type) \
((unsigned)(type) < D_LAST ? memtype[type]->ks_shortdesc : "???")
/*
2005-12-23 15:50:57 +00:00
* End system adaptation definitions.
*/
/*
* Forward declarations.
*/
struct inodedep_hashhead;
struct newblk_hashhead;
struct pagedep_hashhead;
/*
* Internal function prototypes.
*/
2002-03-19 22:40:48 +00:00
static void softdep_error(char *, int);
static void drain_output(struct vnode *);
static struct buf *getdirtybuf(struct buf *, struct mtx *, int);
2002-03-19 22:40:48 +00:00
static void clear_remove(struct thread *);
static void clear_inodedeps(struct thread *);
static int flush_pagedep_deps(struct vnode *, struct mount *,
struct diraddhd *);
static int flush_inodedep_deps(struct mount *, ino_t);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
static int flush_deplist(struct allocdirectlst *, int, int *);
2002-03-19 22:40:48 +00:00
static int handle_written_filepage(struct pagedep *, struct buf *);
static void diradd_inode_written(struct diradd *, struct inodedep *);
static int handle_written_inodeblock(struct inodedep *, struct buf *);
static void handle_allocdirect_partdone(struct allocdirect *);
static void handle_allocindir_partdone(struct allocindir *);
static void initiate_write_filepage(struct pagedep *, struct buf *);
static void handle_written_mkdir(struct mkdir *, int);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static void initiate_write_inodeblock_ufs1(struct inodedep *, struct buf *);
static void initiate_write_inodeblock_ufs2(struct inodedep *, struct buf *);
2002-03-19 22:40:48 +00:00
static void handle_workitem_freefile(struct freefile *);
static void handle_workitem_remove(struct dirrem *, struct vnode *);
static struct dirrem *newdirrem(struct buf *, struct inode *,
struct inode *, int, struct dirrem **);
static void free_diradd(struct diradd *);
static void free_allocindir(struct allocindir *, struct inodedep *);
static void free_newdirblk(struct newdirblk *);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static int indir_trunc(struct freeblks *, ufs2_daddr_t, int, ufs_lbn_t,
ufs2_daddr_t *);
2002-03-19 22:40:48 +00:00
static void deallocate_dependencies(struct buf *, struct inodedep *);
static void free_allocdirect(struct allocdirectlst *,
struct allocdirect *, int);
static int check_inode_unwritten(struct inodedep *);
static int free_inodedep(struct inodedep *);
static void handle_workitem_freeblocks(struct freeblks *, int);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
static void merge_inode_lists(struct allocdirectlst *,struct allocdirectlst *);
2002-03-19 22:40:48 +00:00
static void setup_allocindir_phase2(struct buf *, struct inode *,
struct allocindir *);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static struct allocindir *newallocindir(struct inode *, int, ufs2_daddr_t,
ufs2_daddr_t);
2002-03-19 22:40:48 +00:00
static void handle_workitem_freefrag(struct freefrag *);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static struct freefrag *newfreefrag(struct inode *, ufs2_daddr_t, long);
2002-03-19 22:40:48 +00:00
static void allocdirect_merge(struct allocdirectlst *,
struct allocdirect *, struct allocdirect *);
static struct bmsafemap *bmsafemap_lookup(struct mount *, struct buf *);
static int newblk_find(struct newblk_hashhead *, struct fs *, ufs2_daddr_t,
struct newblk **);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static int newblk_lookup(struct fs *, ufs2_daddr_t, int, struct newblk **);
static int inodedep_find(struct inodedep_hashhead *, struct fs *, ino_t,
struct inodedep **);
static int inodedep_lookup(struct mount *, ino_t, int, struct inodedep **);
2002-03-19 22:40:48 +00:00
static int pagedep_lookup(struct inode *, ufs_lbn_t, int, struct pagedep **);
static int pagedep_find(struct pagedep_hashhead *, ino_t, ufs_lbn_t,
struct mount *mp, int, struct pagedep **);
2002-03-19 22:40:48 +00:00
static void pause_timer(void *);
static int request_cleanup(struct mount *, int);
2002-03-19 22:40:48 +00:00
static int process_worklist_item(struct mount *, int);
static void add_to_worklist(struct worklist *);
static void softdep_flush(void);
static int softdep_speedup(void);
/*
* Exported softdep operations.
*/
2002-03-19 22:40:48 +00:00
static void softdep_disk_io_initiation(struct buf *);
static void softdep_disk_write_complete(struct buf *);
static void softdep_deallocate_dependencies(struct buf *);
static int softdep_count_dependencies(struct buf *bp, int);
static struct mtx lk;
MTX_SYSINIT(softdep_lock, &lk, "Softdep Lock", MTX_DEF);
#define TRY_ACQUIRE_LOCK(lk) mtx_trylock(lk)
#define ACQUIRE_LOCK(lk) mtx_lock(lk)
#define FREE_LOCK(lk) mtx_unlock(lk)
Optimize lockmgr in order to get rid of the pool mutex interlock, of the state transitioning flags and of msleep(9) callings. Use, instead, an algorithm very similar to what sx(9) and rwlock(9) alredy do and direct accesses to the sleepqueue(9) primitive. In order to avoid writer starvation a mechanism very similar to what rwlock(9) uses now is implemented, with the correspective per-thread shared lockmgrs counter. This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and lockmgr_args_rw(). These two are like the 2 "normal" versions, but they both accept a rwlock as interlock. In order to realize this, the general lockmgr manager function "__lockmgr_args()" has been implemented through the generic lock layer. It supports all the blocking primitives, but currently only these 2 mappers live. The patch drops the support for WITNESS atm, but it will be probabilly added soon. Also, there is a little race in the draining code which is also present in the current CVS stock implementation: if some sharers, once they wakeup, are in the runqueue they can contend the lock with the exclusive drainer. This is hard to be fixed but the now committed code mitigate this issue a lot better than the (past) CVS version. In addition assertive KA_HELD and KA_UNHELD have been made mute assertions because they are dangerous and they will be nomore supported soon. In order to avoid namespace pollution, stack.h is splitted into two parts: one which includes only the "struct stack" definition (_stack.h) and one defining the KPI. In this way, newly added _lockmgr.h can just include _stack.h. Kernel ABI results heavilly changed by this commit (the now committed version of "struct lock" is a lot smaller than the previous one) and KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction, so manpages and __FreeBSD_version will be updated accordingly. Tested by: kris, pho, jeff, danger Reviewed by: jeff Sponsored by: Google, Summer of Code program 2007
2008-04-06 20:08:51 +00:00
#define BUF_AREC(bp) ((bp)->b_lock.lock_object.lo_flags |= LK_CANRECURSE)
#define BUF_NOREC(bp) ((bp)->b_lock.lock_object.lo_flags &= ~LK_CANRECURSE)
/*
* Worklist queue management.
* These routines require that the lock be held.
*/
#ifndef /* NOT */ DEBUG
#define WORKLIST_INSERT(head, item) do { \
(item)->wk_state |= ONWORKLIST; \
LIST_INSERT_HEAD(head, item, wk_list); \
} while (0)
#define WORKLIST_REMOVE(item) do { \
(item)->wk_state &= ~ONWORKLIST; \
LIST_REMOVE(item, wk_list); \
} while (0)
#else /* DEBUG */
2002-03-19 22:40:48 +00:00
static void worklist_insert(struct workhead *, struct worklist *);
static void worklist_remove(struct worklist *);
#define WORKLIST_INSERT(head, item) worklist_insert(head, item)
#define WORKLIST_REMOVE(item) worklist_remove(item)
static void
worklist_insert(head, item)
struct workhead *head;
struct worklist *item;
{
mtx_assert(&lk, MA_OWNED);
if (item->wk_state & ONWORKLIST)
panic("worklist_insert: already on list");
item->wk_state |= ONWORKLIST;
LIST_INSERT_HEAD(head, item, wk_list);
}
static void
worklist_remove(item)
struct worklist *item;
{
mtx_assert(&lk, MA_OWNED);
if ((item->wk_state & ONWORKLIST) == 0)
panic("worklist_remove: not on list");
item->wk_state &= ~ONWORKLIST;
LIST_REMOVE(item, wk_list);
}
#endif /* DEBUG */
/*
* Routines for tracking and managing workitems.
*/
static void workitem_free(struct worklist *, int);
static void workitem_alloc(struct worklist *, int, struct mount *);
#define WORKITEM_FREE(item, type) workitem_free((struct worklist *)(item), (type))
static void
workitem_free(item, type)
struct worklist *item;
int type;
{
struct ufsmount *ump;
mtx_assert(&lk, MA_OWNED);
#ifdef DEBUG
if (item->wk_state & ONWORKLIST)
panic("workitem_free: still on list");
if (item->wk_type != type)
panic("workitem_free: type mismatch");
#endif
ump = VFSTOUFS(item->wk_mp);
if (--ump->softdep_deps == 0 && ump->softdep_req)
wakeup(&ump->softdep_deps);
FREE(item, DtoM(type));
}
static void
workitem_alloc(item, type, mp)
struct worklist *item;
int type;
struct mount *mp;
{
item->wk_type = type;
item->wk_mp = mp;
item->wk_state = 0;
ACQUIRE_LOCK(&lk);
VFSTOUFS(mp)->softdep_deps++;
VFSTOUFS(mp)->softdep_accdeps++;
FREE_LOCK(&lk);
}
/*
* Workitem queue management
*/
static int max_softdeps; /* maximum number of structs before slowdown */
static int maxindirdeps = 50; /* max number of indirdeps before slowdown */
static int tickdelay = 2; /* number of ticks to pause during slowdown */
static int proc_waiting; /* tracks whether we have a timeout posted */
static int *stat_countp; /* statistic to count in proc_waiting timeout */
static struct callout softdep_callout;
static int req_pending;
static int req_clear_inodedeps; /* syncer process flush some inodedeps */
#define FLUSH_INODES 1
static int req_clear_remove; /* syncer process flush some freeblks */
#define FLUSH_REMOVE 2
#define FLUSH_REMOVE_WAIT 3
/*
* runtime statistics
*/
static int stat_worklist_push; /* number of worklist cleanups */
static int stat_blk_limit_push; /* number of times block limit neared */
static int stat_ino_limit_push; /* number of times inode limit neared */
static int stat_blk_limit_hit; /* number of times block slowdown imposed */
static int stat_ino_limit_hit; /* number of times inode slowdown imposed */
static int stat_sync_limit_hit; /* number of synchronous slowdowns imposed */
static int stat_indir_blk_ptrs; /* bufs redirtied as indir ptrs not written */
static int stat_inode_bitmap; /* bufs redirtied as inode bitmap not written */
static int stat_direct_blk_ptrs;/* bufs redirtied as direct ptrs not written */
static int stat_dir_entry; /* bufs redirtied as dir entry cannot write */
SYSCTL_INT(_debug, OID_AUTO, max_softdeps, CTLFLAG_RW, &max_softdeps, 0, "");
SYSCTL_INT(_debug, OID_AUTO, tickdelay, CTLFLAG_RW, &tickdelay, 0, "");
SYSCTL_INT(_debug, OID_AUTO, maxindirdeps, CTLFLAG_RW, &maxindirdeps, 0, "");
SYSCTL_INT(_debug, OID_AUTO, worklist_push, CTLFLAG_RW, &stat_worklist_push, 0,"");
SYSCTL_INT(_debug, OID_AUTO, blk_limit_push, CTLFLAG_RW, &stat_blk_limit_push, 0,"");
SYSCTL_INT(_debug, OID_AUTO, ino_limit_push, CTLFLAG_RW, &stat_ino_limit_push, 0,"");
SYSCTL_INT(_debug, OID_AUTO, blk_limit_hit, CTLFLAG_RW, &stat_blk_limit_hit, 0, "");
SYSCTL_INT(_debug, OID_AUTO, ino_limit_hit, CTLFLAG_RW, &stat_ino_limit_hit, 0, "");
SYSCTL_INT(_debug, OID_AUTO, sync_limit_hit, CTLFLAG_RW, &stat_sync_limit_hit, 0, "");
SYSCTL_INT(_debug, OID_AUTO, indir_blk_ptrs, CTLFLAG_RW, &stat_indir_blk_ptrs, 0, "");
SYSCTL_INT(_debug, OID_AUTO, inode_bitmap, CTLFLAG_RW, &stat_inode_bitmap, 0, "");
SYSCTL_INT(_debug, OID_AUTO, direct_blk_ptrs, CTLFLAG_RW, &stat_direct_blk_ptrs, 0, "");
SYSCTL_INT(_debug, OID_AUTO, dir_entry, CTLFLAG_RW, &stat_dir_entry, 0, "");
/* SYSCTL_INT(_debug, OID_AUTO, worklist_num, CTLFLAG_RD, &softdep_on_worklist, 0, ""); */
SYSCTL_DECL(_vfs_ffs);
static int compute_summary_at_mount = 0; /* Whether to recompute the summary at mount time */
SYSCTL_INT(_vfs_ffs, OID_AUTO, compute_summary_at_mount, CTLFLAG_RW,
&compute_summary_at_mount, 0, "Recompute summary at mount");
static struct proc *softdepproc;
static struct kproc_desc softdep_kp = {
"softdepflush",
softdep_flush,
&softdepproc
};
SYSINIT(sdproc, SI_SUB_KTHREAD_UPDATE, SI_ORDER_ANY, kproc_start,
&softdep_kp);
static void
softdep_flush(void)
{
struct mount *nmp;
struct mount *mp;
struct ufsmount *ump;
struct thread *td;
int remaining;
int vfslocked;
td = curthread;
td->td_pflags |= TDP_NORUNNINGBUF;
for (;;) {
kproc_suspend_check(softdepproc);
vfslocked = VFS_LOCK_GIANT((struct mount *)NULL);
ACQUIRE_LOCK(&lk);
/*
* If requested, try removing inode or removal dependencies.
*/
if (req_clear_inodedeps) {
clear_inodedeps(td);
req_clear_inodedeps -= 1;
wakeup_one(&proc_waiting);
}
if (req_clear_remove) {
clear_remove(td);
req_clear_remove -= 1;
wakeup_one(&proc_waiting);
}
FREE_LOCK(&lk);
VFS_UNLOCK_GIANT(vfslocked);
remaining = 0;
mtx_lock(&mountlist_mtx);
for (mp = TAILQ_FIRST(&mountlist); mp != NULL; mp = nmp) {
nmp = TAILQ_NEXT(mp, mnt_list);
if ((mp->mnt_flag & MNT_SOFTDEP) == 0)
continue;
if (vfs_busy(mp, LK_NOWAIT, &mountlist_mtx, td))
continue;
vfslocked = VFS_LOCK_GIANT(mp);
softdep_process_worklist(mp, 0);
ump = VFSTOUFS(mp);
remaining += ump->softdep_on_worklist -
ump->softdep_on_worklist_inprogress;
VFS_UNLOCK_GIANT(vfslocked);
mtx_lock(&mountlist_mtx);
nmp = TAILQ_NEXT(mp, mnt_list);
vfs_unbusy(mp, td);
}
mtx_unlock(&mountlist_mtx);
if (remaining)
continue;
ACQUIRE_LOCK(&lk);
if (!req_pending)
msleep(&req_pending, &lk, PVM, "sdflush", hz);
req_pending = 0;
FREE_LOCK(&lk);
}
}
static int
softdep_speedup(void)
{
mtx_assert(&lk, MA_OWNED);
if (req_pending == 0) {
req_pending = 1;
wakeup(&req_pending);
}
return speedup_syncer();
}
/*
* Add an item to the end of the work queue.
* This routine requires that the lock be held.
* This is the only routine that adds items to the list.
* The following routine is the only one that removes items
* and does so in order from first to last.
*/
static void
add_to_worklist(wk)
struct worklist *wk;
{
struct ufsmount *ump;
mtx_assert(&lk, MA_OWNED);
ump = VFSTOUFS(wk->wk_mp);
if (wk->wk_state & ONWORKLIST)
panic("add_to_worklist: already on list");
wk->wk_state |= ONWORKLIST;
2007-04-04 07:29:53 +00:00
if (LIST_EMPTY(&ump->softdep_workitem_pending))
LIST_INSERT_HEAD(&ump->softdep_workitem_pending, wk, wk_list);
else
LIST_INSERT_AFTER(ump->softdep_worklist_tail, wk, wk_list);
ump->softdep_worklist_tail = wk;
ump->softdep_on_worklist += 1;
}
/*
* Process that runs once per second to handle items in the background queue.
*
* Note that we ensure that everything is done in the order in which they
* appear in the queue. The code below depends on this property to ensure
* that blocks of a file are freed before the inode itself is freed. This
* ordering ensures that no new <vfsid, inum, lbn> triples will be generated
* until all the old ones have been purged from the dependency lists.
*/
int
softdep_process_worklist(mp, full)
struct mount *mp;
int full;
{
struct thread *td = curthread;
int cnt, matchcnt, loopcount;
struct ufsmount *ump;
long starttime;
KASSERT(mp != NULL, ("softdep_process_worklist: NULL mp"));
/*
* Record the process identifier of our caller so that we can give
* this process preferential treatment in request_cleanup below.
*/
matchcnt = 0;
ump = VFSTOUFS(mp);
ACQUIRE_LOCK(&lk);
loopcount = 1;
starttime = time_second;
while (ump->softdep_on_worklist > 0) {
if ((cnt = process_worklist_item(mp, 0)) == -1)
break;
else
matchcnt += cnt;
/*
* If requested, try removing inode or removal dependencies.
*/
if (req_clear_inodedeps) {
clear_inodedeps(td);
req_clear_inodedeps -= 1;
wakeup_one(&proc_waiting);
}
if (req_clear_remove) {
clear_remove(td);
req_clear_remove -= 1;
wakeup_one(&proc_waiting);
}
/*
* We do not generally want to stop for buffer space, but if
* we are really being a buffer hog, we will stop and wait.
*/
if (loopcount++ % 128 == 0) {
FREE_LOCK(&lk);
uio_yield();
bwillwrite();
ACQUIRE_LOCK(&lk);
}
/*
* Never allow processing to run for more than one
* second. Otherwise the other mountpoints may get
* excessively backlogged.
*/
if (!full && starttime != time_second) {
matchcnt = -1;
break;
}
}
FREE_LOCK(&lk);
return (matchcnt);
}
/*
* Process one item on the worklist.
*/
static int
process_worklist_item(mp, flags)
struct mount *mp;
int flags;
{
struct worklist *wk, *wkend;
struct ufsmount *ump;
struct vnode *vp;
int matchcnt = 0;
mtx_assert(&lk, MA_OWNED);
KASSERT(mp != NULL, ("process_worklist_item: NULL mp"));
/*
* If we are being called because of a process doing a
* copy-on-write, then it is not safe to write as we may
* recurse into the copy-on-write routine.
*/
if (curthread->td_pflags & TDP_COWINPROGRESS)
return (-1);
/*
* Normally we just process each item on the worklist in order.
* However, if we are in a situation where we cannot lock any
* inodes, we have to skip over any dirrem requests whose
* vnodes are resident and locked.
*/
ump = VFSTOUFS(mp);
vp = NULL;
LIST_FOREACH(wk, &ump->softdep_workitem_pending, wk_list) {
if (wk->wk_state & INPROGRESS)
continue;
if ((flags & LK_NOWAIT) == 0 || wk->wk_type != D_DIRREM)
break;
wk->wk_state |= INPROGRESS;
ump->softdep_on_worklist_inprogress++;
FREE_LOCK(&lk);
ffs_vget(mp, WK_DIRREM(wk)->dm_oldinum,
LK_NOWAIT | LK_EXCLUSIVE, &vp);
ACQUIRE_LOCK(&lk);
wk->wk_state &= ~INPROGRESS;
ump->softdep_on_worklist_inprogress--;
if (vp != NULL)
break;
}
if (wk == 0)
return (-1);
/*
* Remove the item to be processed. If we are removing the last
* item on the list, we need to recalculate the tail pointer.
* As this happens rarely and usually when the list is short,
* we just run down the list to find it rather than tracking it
* in the above loop.
*/
WORKLIST_REMOVE(wk);
if (wk == ump->softdep_worklist_tail) {
LIST_FOREACH(wkend, &ump->softdep_workitem_pending, wk_list)
if (LIST_NEXT(wkend, wk_list) == NULL)
break;
ump->softdep_worklist_tail = wkend;
}
ump->softdep_on_worklist -= 1;
FREE_LOCK(&lk);
if (vn_start_secondary_write(NULL, &mp, V_NOWAIT))
panic("process_worklist_item: suspended filesystem");
matchcnt++;
switch (wk->wk_type) {
case D_DIRREM:
/* removal of a directory entry */
handle_workitem_remove(WK_DIRREM(wk), vp);
break;
case D_FREEBLKS:
/* releasing blocks and/or fragments from a file */
handle_workitem_freeblocks(WK_FREEBLKS(wk), flags & LK_NOWAIT);
break;
case D_FREEFRAG:
/* releasing a fragment when replaced as a file grows */
handle_workitem_freefrag(WK_FREEFRAG(wk));
break;
case D_FREEFILE:
/* releasing an inode when its link count drops to 0 */
handle_workitem_freefile(WK_FREEFILE(wk));
break;
default:
panic("%s_process_worklist: Unknown type %s",
"softdep", TYPENAME(wk->wk_type));
/* NOTREACHED */
}
vn_finished_secondary_write(mp);
ACQUIRE_LOCK(&lk);
return (matchcnt);
}
/*
* Move dependencies from one buffer to another.
*/
void
softdep_move_dependencies(oldbp, newbp)
struct buf *oldbp;
struct buf *newbp;
{
struct worklist *wk, *wktail;
2007-04-04 07:29:53 +00:00
if (!LIST_EMPTY(&newbp->b_dep))
panic("softdep_move_dependencies: need merge code");
wktail = 0;
ACQUIRE_LOCK(&lk);
while ((wk = LIST_FIRST(&oldbp->b_dep)) != NULL) {
LIST_REMOVE(wk, wk_list);
if (wktail == 0)
LIST_INSERT_HEAD(&newbp->b_dep, wk, wk_list);
else
LIST_INSERT_AFTER(wktail, wk, wk_list);
wktail = wk;
}
FREE_LOCK(&lk);
}
/*
* Purge the work list of all items associated with a particular mount point.
*/
int
softdep_flushworklist(oldmnt, countp, td)
struct mount *oldmnt;
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
int *countp;
struct thread *td;
{
struct vnode *devvp;
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
int count, error = 0;
struct ufsmount *ump;
/*
* Alternately flush the block device associated with the mount
* point and process any dependencies that the flushing
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
* creates. We continue until no more worklist dependencies
* are found.
*/
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
*countp = 0;
ump = VFSTOUFS(oldmnt);
devvp = ump->um_devvp;
while ((count = softdep_process_worklist(oldmnt, 1)) > 0) {
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
*countp += count;
vn_lock(devvp, LK_EXCLUSIVE | LK_RETRY);
error = VOP_FSYNC(devvp, MNT_WAIT, td);
VOP_UNLOCK(devvp, 0);
if (error)
break;
}
return (error);
}
int
softdep_waitidle(struct mount *mp)
{
struct ufsmount *ump;
int error;
int i;
ump = VFSTOUFS(mp);
ACQUIRE_LOCK(&lk);
for (i = 0; i < 10 && ump->softdep_deps; i++) {
ump->softdep_req = 1;
if (ump->softdep_on_worklist)
panic("softdep_waitidle: work added after flush.");
msleep(&ump->softdep_deps, &lk, PVM, "softdeps", 1);
}
ump->softdep_req = 0;
FREE_LOCK(&lk);
error = 0;
if (i == 10) {
error = EBUSY;
2007-05-03 22:39:52 +00:00
printf("softdep_waitidle: Failed to flush worklist for %p\n",
mp);
}
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
return (error);
}
/*
* Flush all vnodes and worklist items associated with a specified mount point.
*/
int
softdep_flushfiles(oldmnt, flags, td)
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
struct mount *oldmnt;
int flags;
struct thread *td;
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
{
int error, count, loopcnt;
2002-03-15 04:06:10 +00:00
error = 0;
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
/*
* Alternately flush the vnodes associated with the mount
* point and process any dependencies that the flushing
* creates. In theory, this loop can happen at most twice,
* but we give it a few extra just to be sure.
*/
for (loopcnt = 10; loopcnt > 0; loopcnt--) {
/*
* Do another flush in case any vnodes were brought in
* as part of the cleanup operations.
*/
if ((error = ffs_flushfiles(oldmnt, flags, td)) != 0)
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
break;
if ((error = softdep_flushworklist(oldmnt, &count, td)) != 0 ||
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
count == 0)
break;
}
/*
* If we are unmounting then it is an error to fail. If we
* are simply trying to downgrade to read-only, then filesystem
* activity can keep us busy forever, so we just fail with EBUSY.
*/
if (loopcnt == 0) {
if (oldmnt->mnt_kern_flag & MNTK_UNMOUNT)
panic("softdep_flushfiles: looping");
error = EBUSY;
}
if (!error)
error = softdep_waitidle(oldmnt);
return (error);
}
/*
* Structure hashing.
*
* There are three types of structures that can be looked up:
* 1) pagedep structures identified by mount point, inode number,
* and logical block.
* 2) inodedep structures identified by mount point and inode number.
* 3) newblk structures identified by mount point and
* physical block number.
*
* The "pagedep" and "inodedep" dependency structures are hashed
* separately from the file blocks and inodes to which they correspond.
* This separation helps when the in-memory copy of an inode or
* file block must be replaced. It also obviates the need to access
* an inode or file page when simply updating (or de-allocating)
* dependency structures. Lookup of newblk structures is needed to
* find newly allocated blocks when trying to associate them with
* their allocdirect or allocindir structure.
*
* The lookup routines optionally create and hash a new instance when
* an existing entry is not found.
*/
#define DEPALLOC 0x0001 /* allocate structure if lookup fails */
This patch corrects two problems with the rate limiting code that was introduced in revision 1.80. The problem manifested itself with a `locking against myself' panic and could also result in soft updates inconsistences associated with inodedeps. The two problems are: 1) One of the background operations could manipulate the bitmap while holding it locked with intent to create. This held lock results in a `locking against myself' panic, when the background processing that we have been coopted to do tries to lock the bitmap which we are already holding locked. To understand how to fix this problem, first, observe that we can do the background cleanups in inodedep_lookup only when allocating inodedeps (DEPALLOC is set in the call to inodedep_lookup). Second observe that calls to inodedep_lookup with DEPALLOC set can only happen from the following calls into the softdep code: softdep_setup_inomapdep softdep_setup_allocdirect softdep_setup_remove softdep_setup_freeblocks softdep_setup_directory_change softdep_setup_directory_add softdep_change_linkcnt Only the first two of these can come from ffs_alloc.c while holding a bitmap locked. Thus, inodedep_lookup must not go off to do request_cleanups when being called from these functions. This change adds a flag, NODELAY, that can be passed to inodedep_lookup to let it know that it should not do background processing in those cases. 2) The return value from request_cleanup when helping out with the cleanup was 0 instead of 1. This meant that despite the fact that we may have slept while doing the cleanups, the code did not recheck for the appearance of an inodedep (e.g., goto top in inodedep_lookup). This lead to the softdep inconsistency in which we ended up with two inodedep's for the same inode. Reviewed by: Peter Wemm <peter@yahoo-inc.com>, Matt Dillon <dillon@earth.backplane.com>
2001-02-20 11:14:38 +00:00
#define NODELAY 0x0002 /* cannot do background work */
/*
* Structures and routines associated with pagedep caching.
*/
LIST_HEAD(pagedep_hashhead, pagedep) *pagedep_hashtbl;
u_long pagedep_hash; /* size of hash table - 1 */
#define PAGEDEP_HASH(mp, inum, lbn) \
(&pagedep_hashtbl[((((register_t)(mp)) >> 13) + (inum) + (lbn)) & \
pagedep_hash])
static int
pagedep_find(pagedephd, ino, lbn, mp, flags, pagedeppp)
struct pagedep_hashhead *pagedephd;
ino_t ino;
ufs_lbn_t lbn;
struct mount *mp;
int flags;
struct pagedep **pagedeppp;
{
struct pagedep *pagedep;
LIST_FOREACH(pagedep, pagedephd, pd_hash)
if (ino == pagedep->pd_ino &&
lbn == pagedep->pd_lbn &&
mp == pagedep->pd_list.wk_mp)
break;
if (pagedep) {
*pagedeppp = pagedep;
if ((flags & DEPALLOC) != 0 &&
(pagedep->pd_state & ONWORKLIST) == 0)
return (0);
return (1);
}
*pagedeppp = NULL;
return (0);
}
/*
* Look up a pagedep. Return 1 if found, 0 if not found or found
* when asked to allocate but not associated with any buffer.
* If not found, allocate if DEPALLOC flag is passed.
* Found or allocated entry is returned in pagedeppp.
* This routine must be called with splbio interrupts blocked.
*/
static int
pagedep_lookup(ip, lbn, flags, pagedeppp)
struct inode *ip;
ufs_lbn_t lbn;
int flags;
struct pagedep **pagedeppp;
{
struct pagedep *pagedep;
struct pagedep_hashhead *pagedephd;
struct mount *mp;
int ret;
int i;
mtx_assert(&lk, MA_OWNED);
mp = ITOV(ip)->v_mount;
pagedephd = PAGEDEP_HASH(mp, ip->i_number, lbn);
ret = pagedep_find(pagedephd, ip->i_number, lbn, mp, flags, pagedeppp);
if (*pagedeppp || (flags & DEPALLOC) == 0)
return (ret);
FREE_LOCK(&lk);
MALLOC(pagedep, struct pagedep *, sizeof(struct pagedep),
M_PAGEDEP, M_SOFTDEP_FLAGS|M_ZERO);
workitem_alloc(&pagedep->pd_list, D_PAGEDEP, mp);
ACQUIRE_LOCK(&lk);
ret = pagedep_find(pagedephd, ip->i_number, lbn, mp, flags, pagedeppp);
if (*pagedeppp) {
WORKITEM_FREE(pagedep, D_PAGEDEP);
return (ret);
}
pagedep->pd_ino = ip->i_number;
pagedep->pd_lbn = lbn;
LIST_INIT(&pagedep->pd_dirremhd);
LIST_INIT(&pagedep->pd_pendinghd);
for (i = 0; i < DAHASHSZ; i++)
LIST_INIT(&pagedep->pd_diraddhd[i]);
LIST_INSERT_HEAD(pagedephd, pagedep, pd_hash);
*pagedeppp = pagedep;
return (0);
}
/*
* Structures and routines associated with inodedep caching.
*/
LIST_HEAD(inodedep_hashhead, inodedep) *inodedep_hashtbl;
static u_long inodedep_hash; /* size of hash table - 1 */
static long num_inodedep; /* number of inodedep allocated */
#define INODEDEP_HASH(fs, inum) \
(&inodedep_hashtbl[((((register_t)(fs)) >> 13) + (inum)) & inodedep_hash])
static int
inodedep_find(inodedephd, fs, inum, inodedeppp)
struct inodedep_hashhead *inodedephd;
struct fs *fs;
ino_t inum;
struct inodedep **inodedeppp;
{
struct inodedep *inodedep;
LIST_FOREACH(inodedep, inodedephd, id_hash)
if (inum == inodedep->id_ino && fs == inodedep->id_fs)
break;
if (inodedep) {
*inodedeppp = inodedep;
return (1);
}
*inodedeppp = NULL;
return (0);
}
/*
* Look up an inodedep. Return 1 if found, 0 if not found.
* If not found, allocate if DEPALLOC flag is passed.
* Found or allocated entry is returned in inodedeppp.
* This routine must be called with splbio interrupts blocked.
*/
static int
inodedep_lookup(mp, inum, flags, inodedeppp)
struct mount *mp;
ino_t inum;
int flags;
struct inodedep **inodedeppp;
{
struct inodedep *inodedep;
struct inodedep_hashhead *inodedephd;
struct fs *fs;
mtx_assert(&lk, MA_OWNED);
fs = VFSTOUFS(mp)->um_fs;
inodedephd = INODEDEP_HASH(fs, inum);
if (inodedep_find(inodedephd, fs, inum, inodedeppp))
return (1);
if ((flags & DEPALLOC) == 0)
return (0);
/*
* If we are over our limit, try to improve the situation.
*/
if (num_inodedep > max_softdeps && (flags & NODELAY) == 0)
request_cleanup(mp, FLUSH_INODES);
FREE_LOCK(&lk);
MALLOC(inodedep, struct inodedep *, sizeof(struct inodedep),
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
M_INODEDEP, M_SOFTDEP_FLAGS);
workitem_alloc(&inodedep->id_list, D_INODEDEP, mp);
ACQUIRE_LOCK(&lk);
if (inodedep_find(inodedephd, fs, inum, inodedeppp)) {
WORKITEM_FREE(inodedep, D_INODEDEP);
return (1);
}
num_inodedep += 1;
inodedep->id_fs = fs;
inodedep->id_ino = inum;
inodedep->id_state = ALLCOMPLETE;
inodedep->id_nlinkdelta = 0;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
inodedep->id_savedino1 = NULL;
inodedep->id_savedsize = -1;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
inodedep->id_savedextsize = -1;
inodedep->id_buf = NULL;
LIST_INIT(&inodedep->id_pendinghd);
LIST_INIT(&inodedep->id_inowait);
LIST_INIT(&inodedep->id_bufwait);
TAILQ_INIT(&inodedep->id_inoupdt);
TAILQ_INIT(&inodedep->id_newinoupdt);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
TAILQ_INIT(&inodedep->id_extupdt);
TAILQ_INIT(&inodedep->id_newextupdt);
LIST_INSERT_HEAD(inodedephd, inodedep, id_hash);
*inodedeppp = inodedep;
return (0);
}
/*
* Structures and routines associated with newblk caching.
*/
LIST_HEAD(newblk_hashhead, newblk) *newblk_hashtbl;
u_long newblk_hash; /* size of hash table - 1 */
#define NEWBLK_HASH(fs, inum) \
(&newblk_hashtbl[((((register_t)(fs)) >> 13) + (inum)) & newblk_hash])
static int
newblk_find(newblkhd, fs, newblkno, newblkpp)
struct newblk_hashhead *newblkhd;
struct fs *fs;
ufs2_daddr_t newblkno;
struct newblk **newblkpp;
{
struct newblk *newblk;
LIST_FOREACH(newblk, newblkhd, nb_hash)
if (newblkno == newblk->nb_newblkno && fs == newblk->nb_fs)
break;
if (newblk) {
*newblkpp = newblk;
return (1);
}
*newblkpp = NULL;
return (0);
}
/*
* Look up a newblk. Return 1 if found, 0 if not found.
* If not found, allocate if DEPALLOC flag is passed.
* Found or allocated entry is returned in newblkpp.
*/
static int
newblk_lookup(fs, newblkno, flags, newblkpp)
struct fs *fs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t newblkno;
int flags;
struct newblk **newblkpp;
{
struct newblk *newblk;
struct newblk_hashhead *newblkhd;
newblkhd = NEWBLK_HASH(fs, newblkno);
if (newblk_find(newblkhd, fs, newblkno, newblkpp))
return (1);
if ((flags & DEPALLOC) == 0)
return (0);
FREE_LOCK(&lk);
MALLOC(newblk, struct newblk *, sizeof(struct newblk),
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
M_NEWBLK, M_SOFTDEP_FLAGS);
ACQUIRE_LOCK(&lk);
if (newblk_find(newblkhd, fs, newblkno, newblkpp)) {
FREE(newblk, M_NEWBLK);
return (1);
}
newblk->nb_state = 0;
newblk->nb_fs = fs;
newblk->nb_newblkno = newblkno;
LIST_INSERT_HEAD(newblkhd, newblk, nb_hash);
*newblkpp = newblk;
return (0);
}
/*
* Executed during filesystem system initialization before
2002-05-16 21:28:32 +00:00
* mounting any filesystems.
*/
void
softdep_initialize()
{
LIST_INIT(&mkdirlisthd);
max_softdeps = desiredvnodes * 4;
pagedep_hashtbl = hashinit(desiredvnodes / 5, M_PAGEDEP,
&pagedep_hash);
inodedep_hashtbl = hashinit(desiredvnodes, M_INODEDEP, &inodedep_hash);
newblk_hashtbl = hashinit(64, M_NEWBLK, &newblk_hash);
/* initialise bioops hack */
bioops.io_start = softdep_disk_io_initiation;
bioops.io_complete = softdep_disk_write_complete;
bioops.io_deallocate = softdep_deallocate_dependencies;
bioops.io_countdeps = softdep_count_dependencies;
/* Initialize the callout with an mtx. */
callout_init_mtx(&softdep_callout, &lk, 0);
}
/*
* Executed after all filesystems have been unmounted during
* filesystem module unload.
*/
void
softdep_uninitialize()
{
callout_drain(&softdep_callout);
hashdestroy(pagedep_hashtbl, M_PAGEDEP, pagedep_hash);
hashdestroy(inodedep_hashtbl, M_INODEDEP, inodedep_hash);
hashdestroy(newblk_hashtbl, M_NEWBLK, newblk_hash);
}
/*
* Called at mount time to notify the dependency code that a
* filesystem wishes to use it.
*/
int
softdep_mount(devvp, mp, fs, cred)
struct vnode *devvp;
struct mount *mp;
struct fs *fs;
struct ucred *cred;
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct csum_total cstotal;
struct ufsmount *ump;
struct cg *cgp;
struct buf *bp;
int error, cyl;
MNT_ILOCK(mp);
mp->mnt_flag = (mp->mnt_flag & ~MNT_ASYNC) | MNT_SOFTDEP;
if ((mp->mnt_kern_flag & MNTK_SOFTDEP) == 0) {
mp->mnt_kern_flag = (mp->mnt_kern_flag & ~MNTK_ASYNC) |
MNTK_SOFTDEP;
mp->mnt_noasync++;
}
MNT_IUNLOCK(mp);
ump = VFSTOUFS(mp);
LIST_INIT(&ump->softdep_workitem_pending);
ump->softdep_worklist_tail = NULL;
ump->softdep_on_worklist = 0;
ump->softdep_deps = 0;
/*
* When doing soft updates, the counters in the
* superblock may have gotten out of sync. Recomputation
* can take a long time and can be deferred for background
* fsck. However, the old behavior of scanning the cylinder
* groups and recalculating them at mount time is available
* by setting vfs.ffs.compute_summary_at_mount to one.
*/
if (compute_summary_at_mount == 0 || fs->fs_clean != 0)
return (0);
bzero(&cstotal, sizeof cstotal);
for (cyl = 0; cyl < fs->fs_ncg; cyl++) {
if ((error = bread(devvp, fsbtodb(fs, cgtod(fs, cyl)),
fs->fs_cgsize, cred, &bp)) != 0) {
brelse(bp);
return (error);
}
cgp = (struct cg *)bp->b_data;
cstotal.cs_nffree += cgp->cg_cs.cs_nffree;
cstotal.cs_nbfree += cgp->cg_cs.cs_nbfree;
cstotal.cs_nifree += cgp->cg_cs.cs_nifree;
cstotal.cs_ndir += cgp->cg_cs.cs_ndir;
fs->fs_cs(fs, cyl) = cgp->cg_cs;
brelse(bp);
}
#ifdef DEBUG
if (bcmp(&cstotal, &fs->fs_cstotal, sizeof cstotal))
printf("%s: superblock summary recomputed\n", fs->fs_fsmnt);
#endif
bcopy(&cstotal, &fs->fs_cstotal, sizeof cstotal);
return (0);
}
/*
* Protecting the freemaps (or bitmaps).
*
2002-05-16 21:28:32 +00:00
* To eliminate the need to execute fsck before mounting a filesystem
* after a power failure, one must (conservatively) guarantee that the
* on-disk copy of the bitmaps never indicate that a live inode or block is
* free. So, when a block or inode is allocated, the bitmap should be
* updated (on disk) before any new pointers. When a block or inode is
* freed, the bitmap should not be updated until all pointers have been
* reset. The latter dependency is handled by the delayed de-allocation
* approach described below for block and inode de-allocation. The former
* dependency is handled by calling the following procedure when a block or
* inode is allocated. When an inode is allocated an "inodedep" is created
* with its DEPCOMPLETE flag cleared until its bitmap is written to disk.
* Each "inodedep" is also inserted into the hash indexing structure so
* that any additional link additions can be made dependent on the inode
* allocation.
*
2002-05-16 21:28:32 +00:00
* The ufs filesystem maintains a number of free block counts (e.g., per
* cylinder group, per cylinder and per <cylinder, rotational position> pair)
* in addition to the bitmaps. These counts are used to improve efficiency
* during allocation and therefore must be consistent with the bitmaps.
* There is no convenient way to guarantee post-crash consistency of these
* counts with simple update ordering, for two main reasons: (1) The counts
* and bitmaps for a single cylinder group block are not in the same disk
* sector. If a disk write is interrupted (e.g., by power failure), one may
* be written and the other not. (2) Some of the counts are located in the
* superblock rather than the cylinder group block. So, we focus our soft
* updates implementation on protecting the bitmaps. When mounting a
* filesystem, we recompute the auxiliary counts from the bitmaps.
*/
/*
* Called just after updating the cylinder group block to allocate an inode.
*/
void
softdep_setup_inomapdep(bp, ip, newinum)
struct buf *bp; /* buffer for cylgroup block with inode map */
struct inode *ip; /* inode related to allocation */
ino_t newinum; /* new inode number being allocated */
{
struct inodedep *inodedep;
struct bmsafemap *bmsafemap;
/*
* Create a dependency for the newly allocated inode.
* Panic if it already exists as something is seriously wrong.
* Otherwise add it to the dependency list for the buffer holding
* the cylinder group map from which it was allocated.
*/
ACQUIRE_LOCK(&lk);
if ((inodedep_lookup(UFSTOVFS(ip->i_ump), newinum, DEPALLOC|NODELAY,
&inodedep)))
panic("softdep_setup_inomapdep: dependency for new inode "
"already exists");
inodedep->id_buf = bp;
inodedep->id_state &= ~DEPCOMPLETE;
bmsafemap = bmsafemap_lookup(inodedep->id_list.wk_mp, bp);
LIST_INSERT_HEAD(&bmsafemap->sm_inodedephd, inodedep, id_deps);
FREE_LOCK(&lk);
}
/*
* Called just after updating the cylinder group block to
* allocate block or fragment.
*/
void
softdep_setup_blkmapdep(bp, mp, newblkno)
struct buf *bp; /* buffer for cylgroup block with block map */
struct mount *mp; /* filesystem doing allocation */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t newblkno; /* number of newly allocated block */
{
struct newblk *newblk;
struct bmsafemap *bmsafemap;
struct fs *fs;
fs = VFSTOUFS(mp)->um_fs;
/*
* Create a dependency for the newly allocated block.
* Add it to the dependency list for the buffer holding
* the cylinder group map from which it was allocated.
*/
ACQUIRE_LOCK(&lk);
if (newblk_lookup(fs, newblkno, DEPALLOC, &newblk) != 0)
panic("softdep_setup_blkmapdep: found block");
newblk->nb_bmsafemap = bmsafemap = bmsafemap_lookup(mp, bp);
LIST_INSERT_HEAD(&bmsafemap->sm_newblkhd, newblk, nb_deps);
FREE_LOCK(&lk);
}
/*
* Find the bmsafemap associated with a cylinder group buffer.
* If none exists, create one. The buffer must be locked when
* this routine is called and this routine must be called with
* splbio interrupts blocked.
*/
static struct bmsafemap *
bmsafemap_lookup(mp, bp)
struct mount *mp;
struct buf *bp;
{
struct bmsafemap *bmsafemap;
struct worklist *wk;
mtx_assert(&lk, MA_OWNED);
LIST_FOREACH(wk, &bp->b_dep, wk_list)
if (wk->wk_type == D_BMSAFEMAP)
return (WK_BMSAFEMAP(wk));
FREE_LOCK(&lk);
MALLOC(bmsafemap, struct bmsafemap *, sizeof(struct bmsafemap),
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
M_BMSAFEMAP, M_SOFTDEP_FLAGS);
workitem_alloc(&bmsafemap->sm_list, D_BMSAFEMAP, mp);
bmsafemap->sm_buf = bp;
LIST_INIT(&bmsafemap->sm_allocdirecthd);
LIST_INIT(&bmsafemap->sm_allocindirhd);
LIST_INIT(&bmsafemap->sm_inodedephd);
LIST_INIT(&bmsafemap->sm_newblkhd);
ACQUIRE_LOCK(&lk);
WORKLIST_INSERT(&bp->b_dep, &bmsafemap->sm_list);
return (bmsafemap);
}
/*
* Direct block allocation dependencies.
*
* When a new block is allocated, the corresponding disk locations must be
* initialized (with zeros or new data) before the on-disk inode points to
* them. Also, the freemap from which the block was allocated must be
* updated (on disk) before the inode's pointer. These two dependencies are
* independent of each other and are needed for all file blocks and indirect
* blocks that are pointed to directly by the inode. Just before the
* "in-core" version of the inode is updated with a newly allocated block
* number, a procedure (below) is called to setup allocation dependency
* structures. These structures are removed when the corresponding
* dependencies are satisfied or when the block allocation becomes obsolete
* (i.e., the file is deleted, the block is de-allocated, or the block is a
* fragment that gets upgraded). All of these cases are handled in
* procedures described later.
*
* When a file extension causes a fragment to be upgraded, either to a larger
* fragment or to a full block, the on-disk location may change (if the
* previous fragment could not simply be extended). In this case, the old
* fragment must be de-allocated, but not until after the inode's pointer has
* been updated. In most cases, this is handled by later procedures, which
* will construct a "freefrag" structure to be added to the workitem queue
* when the inode update is complete (or obsolete). The main exception to
* this is when an allocation occurs while a pending allocation dependency
* (for the same block pointer) remains. This case is handled in the main
* allocation dependency setup procedure by immediately freeing the
* unreferenced fragments.
*/
void
softdep_setup_allocdirect(ip, lbn, newblkno, oldblkno, newsize, oldsize, bp)
struct inode *ip; /* inode to which block is being added */
ufs_lbn_t lbn; /* block pointer within inode */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t newblkno; /* disk block number being added */
ufs2_daddr_t oldblkno; /* previous block number, 0 unless frag */
long newsize; /* size of new block */
long oldsize; /* size of new block */
struct buf *bp; /* bp for allocated block */
{
struct allocdirect *adp, *oldadp;
struct allocdirectlst *adphead;
struct bmsafemap *bmsafemap;
struct inodedep *inodedep;
struct pagedep *pagedep;
struct newblk *newblk;
struct mount *mp;
mp = UFSTOVFS(ip->i_ump);
MALLOC(adp, struct allocdirect *, sizeof(struct allocdirect),
M_ALLOCDIRECT, M_SOFTDEP_FLAGS|M_ZERO);
workitem_alloc(&adp->ad_list, D_ALLOCDIRECT, mp);
adp->ad_lbn = lbn;
adp->ad_newblkno = newblkno;
adp->ad_oldblkno = oldblkno;
adp->ad_newsize = newsize;
adp->ad_oldsize = oldsize;
adp->ad_state = ATTACHED;
LIST_INIT(&adp->ad_newdirblk);
if (newblkno == oldblkno)
adp->ad_freefrag = NULL;
else
adp->ad_freefrag = newfreefrag(ip, oldblkno, oldsize);
ACQUIRE_LOCK(&lk);
if (lbn >= NDADDR) {
/* allocating an indirect block */
if (oldblkno != 0)
panic("softdep_setup_allocdirect: non-zero indir");
} else {
/*
* Allocating a direct block.
*
* If we are allocating a directory block, then we must
* allocate an associated pagedep to track additions and
* deletions.
*/
if ((ip->i_mode & IFMT) == IFDIR &&
pagedep_lookup(ip, lbn, DEPALLOC, &pagedep) == 0)
WORKLIST_INSERT(&bp->b_dep, &pagedep->pd_list);
}
if (newblk_lookup(ip->i_fs, newblkno, 0, &newblk) == 0)
panic("softdep_setup_allocdirect: lost block");
if (newblk->nb_state == DEPCOMPLETE) {
adp->ad_state |= DEPCOMPLETE;
adp->ad_buf = NULL;
} else {
bmsafemap = newblk->nb_bmsafemap;
adp->ad_buf = bmsafemap->sm_buf;
LIST_REMOVE(newblk, nb_deps);
LIST_INSERT_HEAD(&bmsafemap->sm_allocdirecthd, adp, ad_deps);
}
LIST_REMOVE(newblk, nb_hash);
FREE(newblk, M_NEWBLK);
inodedep_lookup(mp, ip->i_number, DEPALLOC | NODELAY, &inodedep);
adp->ad_inodedep = inodedep;
WORKLIST_INSERT(&bp->b_dep, &adp->ad_list);
/*
* The list of allocdirects must be kept in sorted and ascending
* order so that the rollback routines can quickly determine the
* first uncommitted block (the size of the file stored on disk
* ends at the end of the lowest committed fragment, or if there
* are no fragments, at the end of the highest committed block).
* Since files generally grow, the typical case is that the new
* block is to be added at the end of the list. We speed this
* special case by checking against the last allocdirect in the
* list before laboriously traversing the list looking for the
* insertion point.
*/
adphead = &inodedep->id_newinoupdt;
oldadp = TAILQ_LAST(adphead, allocdirectlst);
if (oldadp == NULL || oldadp->ad_lbn <= lbn) {
/* insert at end of list */
TAILQ_INSERT_TAIL(adphead, adp, ad_next);
if (oldadp != NULL && oldadp->ad_lbn == lbn)
allocdirect_merge(adphead, adp, oldadp);
FREE_LOCK(&lk);
return;
}
TAILQ_FOREACH(oldadp, adphead, ad_next) {
if (oldadp->ad_lbn >= lbn)
break;
}
if (oldadp == NULL)
panic("softdep_setup_allocdirect: lost entry");
/* insert in middle of list */
TAILQ_INSERT_BEFORE(oldadp, adp, ad_next);
if (oldadp->ad_lbn == lbn)
allocdirect_merge(adphead, adp, oldadp);
FREE_LOCK(&lk);
}
/*
* Replace an old allocdirect dependency with a newer one.
* This routine must be called with splbio interrupts blocked.
*/
static void
allocdirect_merge(adphead, newadp, oldadp)
struct allocdirectlst *adphead; /* head of list holding allocdirects */
struct allocdirect *newadp; /* allocdirect being added */
struct allocdirect *oldadp; /* existing allocdirect being checked */
{
struct worklist *wk;
struct freefrag *freefrag;
struct newdirblk *newdirblk;
mtx_assert(&lk, MA_OWNED);
if (newadp->ad_oldblkno != oldadp->ad_newblkno ||
newadp->ad_oldsize != oldadp->ad_newsize ||
newadp->ad_lbn >= NDADDR)
panic("%s %jd != new %jd || old size %ld != new %ld",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
"allocdirect_merge: old blkno",
(intmax_t)newadp->ad_oldblkno,
(intmax_t)oldadp->ad_newblkno,
newadp->ad_oldsize, oldadp->ad_newsize);
newadp->ad_oldblkno = oldadp->ad_oldblkno;
newadp->ad_oldsize = oldadp->ad_oldsize;
/*
* If the old dependency had a fragment to free or had never
* previously had a block allocated, then the new dependency
* can immediately post its freefrag and adopt the old freefrag.
* This action is done by swapping the freefrag dependencies.
* The new dependency gains the old one's freefrag, and the
* old one gets the new one and then immediately puts it on
* the worklist when it is freed by free_allocdirect. It is
* not possible to do this swap when the old dependency had a
* non-zero size but no previous fragment to free. This condition
* arises when the new block is an extension of the old block.
* Here, the first part of the fragment allocated to the new
* dependency is part of the block currently claimed on disk by
* the old dependency, so cannot legitimately be freed until the
* conditions for the new dependency are fulfilled.
*/
if (oldadp->ad_freefrag != NULL || oldadp->ad_oldblkno == 0) {
freefrag = newadp->ad_freefrag;
newadp->ad_freefrag = oldadp->ad_freefrag;
oldadp->ad_freefrag = freefrag;
}
/*
* If we are tracking a new directory-block allocation,
* move it from the old allocdirect to the new allocdirect.
*/
if ((wk = LIST_FIRST(&oldadp->ad_newdirblk)) != NULL) {
newdirblk = WK_NEWDIRBLK(wk);
WORKLIST_REMOVE(&newdirblk->db_list);
2007-04-04 07:29:53 +00:00
if (!LIST_EMPTY(&oldadp->ad_newdirblk))
panic("allocdirect_merge: extra newdirblk");
WORKLIST_INSERT(&newadp->ad_newdirblk, &newdirblk->db_list);
}
free_allocdirect(adphead, oldadp, 0);
}
/*
* Allocate a new freefrag structure if needed.
*/
static struct freefrag *
newfreefrag(ip, blkno, size)
struct inode *ip;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t blkno;
long size;
{
struct freefrag *freefrag;
struct fs *fs;
if (blkno == 0)
return (NULL);
fs = ip->i_fs;
if (fragnum(fs, blkno) + numfrags(fs, size) > fs->fs_frag)
panic("newfreefrag: frag size");
MALLOC(freefrag, struct freefrag *, sizeof(struct freefrag),
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
M_FREEFRAG, M_SOFTDEP_FLAGS);
workitem_alloc(&freefrag->ff_list, D_FREEFRAG, UFSTOVFS(ip->i_ump));
freefrag->ff_inum = ip->i_number;
freefrag->ff_blkno = blkno;
freefrag->ff_fragsize = size;
return (freefrag);
}
/*
* This workitem de-allocates fragments that were replaced during
* file block allocation.
*/
static void
handle_workitem_freefrag(freefrag)
struct freefrag *freefrag;
{
struct ufsmount *ump = VFSTOUFS(freefrag->ff_list.wk_mp);
ffs_blkfree(ump, ump->um_fs, ump->um_devvp, freefrag->ff_blkno,
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
freefrag->ff_fragsize, freefrag->ff_inum);
ACQUIRE_LOCK(&lk);
WORKITEM_FREE(freefrag, D_FREEFRAG);
FREE_LOCK(&lk);
}
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
/*
* Set up a dependency structure for an external attributes data block.
* This routine follows much of the structure of softdep_setup_allocdirect.
* See the description of softdep_setup_allocdirect above for details.
*/
void
softdep_setup_allocext(ip, lbn, newblkno, oldblkno, newsize, oldsize, bp)
struct inode *ip;
ufs_lbn_t lbn;
ufs2_daddr_t newblkno;
ufs2_daddr_t oldblkno;
long newsize;
long oldsize;
struct buf *bp;
{
struct allocdirect *adp, *oldadp;
struct allocdirectlst *adphead;
struct bmsafemap *bmsafemap;
struct inodedep *inodedep;
struct newblk *newblk;
struct mount *mp;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
mp = UFSTOVFS(ip->i_ump);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
MALLOC(adp, struct allocdirect *, sizeof(struct allocdirect),
M_ALLOCDIRECT, M_SOFTDEP_FLAGS|M_ZERO);
workitem_alloc(&adp->ad_list, D_ALLOCDIRECT, mp);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
adp->ad_lbn = lbn;
adp->ad_newblkno = newblkno;
adp->ad_oldblkno = oldblkno;
adp->ad_newsize = newsize;
adp->ad_oldsize = oldsize;
adp->ad_state = ATTACHED | EXTDATA;
LIST_INIT(&adp->ad_newdirblk);
if (newblkno == oldblkno)
adp->ad_freefrag = NULL;
else
adp->ad_freefrag = newfreefrag(ip, oldblkno, oldsize);
ACQUIRE_LOCK(&lk);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (newblk_lookup(ip->i_fs, newblkno, 0, &newblk) == 0)
panic("softdep_setup_allocext: lost block");
inodedep_lookup(mp, ip->i_number, DEPALLOC | NODELAY, &inodedep);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
adp->ad_inodedep = inodedep;
if (newblk->nb_state == DEPCOMPLETE) {
adp->ad_state |= DEPCOMPLETE;
adp->ad_buf = NULL;
} else {
bmsafemap = newblk->nb_bmsafemap;
adp->ad_buf = bmsafemap->sm_buf;
LIST_REMOVE(newblk, nb_deps);
LIST_INSERT_HEAD(&bmsafemap->sm_allocdirecthd, adp, ad_deps);
}
LIST_REMOVE(newblk, nb_hash);
FREE(newblk, M_NEWBLK);
WORKLIST_INSERT(&bp->b_dep, &adp->ad_list);
if (lbn >= NXADDR)
panic("softdep_setup_allocext: lbn %lld > NXADDR",
(long long)lbn);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
/*
* The list of allocdirects must be kept in sorted and ascending
* order so that the rollback routines can quickly determine the
* first uncommitted block (the size of the file stored on disk
* ends at the end of the lowest committed fragment, or if there
* are no fragments, at the end of the highest committed block).
* Since files generally grow, the typical case is that the new
* block is to be added at the end of the list. We speed this
* special case by checking against the last allocdirect in the
* list before laboriously traversing the list looking for the
* insertion point.
*/
adphead = &inodedep->id_newextupdt;
oldadp = TAILQ_LAST(adphead, allocdirectlst);
if (oldadp == NULL || oldadp->ad_lbn <= lbn) {
/* insert at end of list */
TAILQ_INSERT_TAIL(adphead, adp, ad_next);
if (oldadp != NULL && oldadp->ad_lbn == lbn)
allocdirect_merge(adphead, adp, oldadp);
FREE_LOCK(&lk);
return;
}
TAILQ_FOREACH(oldadp, adphead, ad_next) {
if (oldadp->ad_lbn >= lbn)
break;
}
if (oldadp == NULL)
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
panic("softdep_setup_allocext: lost entry");
/* insert in middle of list */
TAILQ_INSERT_BEFORE(oldadp, adp, ad_next);
if (oldadp->ad_lbn == lbn)
allocdirect_merge(adphead, adp, oldadp);
FREE_LOCK(&lk);
}
/*
* Indirect block allocation dependencies.
*
* The same dependencies that exist for a direct block also exist when
* a new block is allocated and pointed to by an entry in a block of
* indirect pointers. The undo/redo states described above are also
* used here. Because an indirect block contains many pointers that
* may have dependencies, a second copy of the entire in-memory indirect
* block is kept. The buffer cache copy is always completely up-to-date.
* The second copy, which is used only as a source for disk writes,
* contains only the safe pointers (i.e., those that have no remaining
* update dependencies). The second copy is freed when all pointers
* are safe. The cache is not allowed to replace indirect blocks with
* pending update dependencies. If a buffer containing an indirect
* block with dependencies is written, these routines will mark it
* dirty again. It can only be successfully written once all the
* dependencies are removed. The ffs_fsync routine in conjunction with
* softdep_sync_metadata work together to get all the dependencies
* removed so that a file can be successfully written to disk. Three
* procedures are used when setting up indirect block pointer
* dependencies. The division is necessary because of the organization
* of the "balloc" routine and because of the distinction between file
* pages and file metadata blocks.
*/
/*
* Allocate a new allocindir structure.
*/
static struct allocindir *
newallocindir(ip, ptrno, newblkno, oldblkno)
struct inode *ip; /* inode for file being extended */
int ptrno; /* offset of pointer in indirect block */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t newblkno; /* disk block number being added */
ufs2_daddr_t oldblkno; /* previous block number, 0 if none */
{
struct allocindir *aip;
MALLOC(aip, struct allocindir *, sizeof(struct allocindir),
M_ALLOCINDIR, M_SOFTDEP_FLAGS|M_ZERO);
workitem_alloc(&aip->ai_list, D_ALLOCINDIR, UFSTOVFS(ip->i_ump));
aip->ai_state = ATTACHED;
aip->ai_offset = ptrno;
aip->ai_newblkno = newblkno;
aip->ai_oldblkno = oldblkno;
aip->ai_freefrag = newfreefrag(ip, oldblkno, ip->i_fs->fs_bsize);
return (aip);
}
/*
* Called just before setting an indirect block pointer
* to a newly allocated file page.
*/
void
softdep_setup_allocindir_page(ip, lbn, bp, ptrno, newblkno, oldblkno, nbp)
struct inode *ip; /* inode for file being extended */
ufs_lbn_t lbn; /* allocated block number within file */
struct buf *bp; /* buffer with indirect blk referencing page */
int ptrno; /* offset of pointer in indirect block */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t newblkno; /* disk block number being added */
ufs2_daddr_t oldblkno; /* previous block number, 0 if none */
struct buf *nbp; /* buffer holding allocated page */
{
struct allocindir *aip;
struct pagedep *pagedep;
ASSERT_VOP_LOCKED(ITOV(ip), "softdep_setup_allocindir_page");
aip = newallocindir(ip, ptrno, newblkno, oldblkno);
ACQUIRE_LOCK(&lk);
/*
* If we are allocating a directory page, then we must
* allocate an associated pagedep to track additions and
* deletions.
*/
if ((ip->i_mode & IFMT) == IFDIR &&
pagedep_lookup(ip, lbn, DEPALLOC, &pagedep) == 0)
WORKLIST_INSERT(&nbp->b_dep, &pagedep->pd_list);
WORKLIST_INSERT(&nbp->b_dep, &aip->ai_list);
setup_allocindir_phase2(bp, ip, aip);
FREE_LOCK(&lk);
}
/*
* Called just before setting an indirect block pointer to a
* newly allocated indirect block.
*/
void
softdep_setup_allocindir_meta(nbp, ip, bp, ptrno, newblkno)
struct buf *nbp; /* newly allocated indirect block */
struct inode *ip; /* inode for file being extended */
struct buf *bp; /* indirect block referencing allocated block */
int ptrno; /* offset of pointer in indirect block */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t newblkno; /* disk block number being added */
{
struct allocindir *aip;
ASSERT_VOP_LOCKED(ITOV(ip), "softdep_setup_allocindir_meta");
aip = newallocindir(ip, ptrno, newblkno, 0);
ACQUIRE_LOCK(&lk);
WORKLIST_INSERT(&nbp->b_dep, &aip->ai_list);
setup_allocindir_phase2(bp, ip, aip);
FREE_LOCK(&lk);
}
/*
* Called to finish the allocation of the "aip" allocated
* by one of the two routines above.
*/
static void
setup_allocindir_phase2(bp, ip, aip)
struct buf *bp; /* in-memory copy of the indirect block */
struct inode *ip; /* inode for file being extended */
struct allocindir *aip; /* allocindir allocated by the above routines */
{
struct worklist *wk;
struct indirdep *indirdep, *newindirdep;
struct bmsafemap *bmsafemap;
struct allocindir *oldaip;
struct freefrag *freefrag;
struct newblk *newblk;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t blkno;
mtx_assert(&lk, MA_OWNED);
if (bp->b_lblkno >= 0)
panic("setup_allocindir_phase2: not indir blk");
for (indirdep = NULL, newindirdep = NULL; ; ) {
LIST_FOREACH(wk, &bp->b_dep, wk_list) {
if (wk->wk_type != D_INDIRDEP)
continue;
indirdep = WK_INDIRDEP(wk);
break;
}
if (indirdep == NULL && newindirdep) {
indirdep = newindirdep;
WORKLIST_INSERT(&bp->b_dep, &indirdep->ir_list);
newindirdep = NULL;
}
if (indirdep) {
if (newblk_lookup(ip->i_fs, aip->ai_newblkno, 0,
&newblk) == 0)
panic("setup_allocindir: lost block");
if (newblk->nb_state == DEPCOMPLETE) {
aip->ai_state |= DEPCOMPLETE;
aip->ai_buf = NULL;
} else {
bmsafemap = newblk->nb_bmsafemap;
aip->ai_buf = bmsafemap->sm_buf;
LIST_REMOVE(newblk, nb_deps);
LIST_INSERT_HEAD(&bmsafemap->sm_allocindirhd,
aip, ai_deps);
}
LIST_REMOVE(newblk, nb_hash);
FREE(newblk, M_NEWBLK);
aip->ai_indirdep = indirdep;
/*
* Check to see if there is an existing dependency
* for this block. If there is, merge the old
* dependency into the new one.
*/
if (aip->ai_oldblkno == 0)
oldaip = NULL;
else
2001-02-04 12:37:48 +00:00
LIST_FOREACH(oldaip, &indirdep->ir_deplisthd, ai_next)
if (oldaip->ai_offset == aip->ai_offset)
break;
freefrag = NULL;
if (oldaip != NULL) {
if (oldaip->ai_newblkno != aip->ai_oldblkno)
panic("setup_allocindir_phase2: blkno");
aip->ai_oldblkno = oldaip->ai_oldblkno;
freefrag = aip->ai_freefrag;
aip->ai_freefrag = oldaip->ai_freefrag;
oldaip->ai_freefrag = NULL;
free_allocindir(oldaip, NULL);
}
LIST_INSERT_HEAD(&indirdep->ir_deplisthd, aip, ai_next);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (ip->i_ump->um_fstype == UFS1)
((ufs1_daddr_t *)indirdep->ir_savebp->b_data)
[aip->ai_offset] = aip->ai_oldblkno;
else
((ufs2_daddr_t *)indirdep->ir_savebp->b_data)
[aip->ai_offset] = aip->ai_oldblkno;
FREE_LOCK(&lk);
if (freefrag != NULL)
handle_workitem_freefrag(freefrag);
} else
FREE_LOCK(&lk);
if (newindirdep) {
newindirdep->ir_savebp->b_flags |= B_INVAL | B_NOCACHE;
brelse(newindirdep->ir_savebp);
ACQUIRE_LOCK(&lk);
WORKITEM_FREE((caddr_t)newindirdep, D_INDIRDEP);
if (indirdep)
break;
FREE_LOCK(&lk);
}
if (indirdep) {
ACQUIRE_LOCK(&lk);
break;
}
MALLOC(newindirdep, struct indirdep *, sizeof(struct indirdep),
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
M_INDIRDEP, M_SOFTDEP_FLAGS);
workitem_alloc(&newindirdep->ir_list, D_INDIRDEP,
UFSTOVFS(ip->i_ump));
newindirdep->ir_state = ATTACHED;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (ip->i_ump->um_fstype == UFS1)
newindirdep->ir_state |= UFS1FMT;
LIST_INIT(&newindirdep->ir_deplisthd);
LIST_INIT(&newindirdep->ir_donehd);
if (bp->b_blkno == bp->b_lblkno) {
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
ufs_bmaparray(bp->b_vp, bp->b_lblkno, &blkno, bp,
NULL, NULL);
bp->b_blkno = blkno;
}
newindirdep->ir_savebp =
getblk(ip->i_devvp, bp->b_blkno, bp->b_bcount, 0, 0, 0);
BUF_KERNPROC(newindirdep->ir_savebp);
bcopy(bp->b_data, newindirdep->ir_savebp->b_data, bp->b_bcount);
ACQUIRE_LOCK(&lk);
}
}
/*
* Block de-allocation dependencies.
*
* When blocks are de-allocated, the on-disk pointers must be nullified before
* the blocks are made available for use by other files. (The true
* requirement is that old pointers must be nullified before new on-disk
* pointers are set. We chose this slightly more stringent requirement to
* reduce complexity.) Our implementation handles this dependency by updating
* the inode (or indirect block) appropriately but delaying the actual block
* de-allocation (i.e., freemap and free space count manipulation) until
* after the updated versions reach stable storage. After the disk is
* updated, the blocks can be safely de-allocated whenever it is convenient.
* This implementation handles only the common case of reducing a file's
* length to zero. Other cases are handled by the conventional synchronous
* write approach.
*
* The ffs implementation with which we worked double-checks
* the state of the block pointers and file size as it reduces
* a file's length. Some of this code is replicated here in our
* soft updates implementation. The freeblks->fb_chkcnt field is
* used to transfer a part of this information to the procedure
* that eventually de-allocates the blocks.
*
* This routine should be called from the routine that shortens
* a file's length, before the inode's size or block pointers
* are modified. It will save the block pointer information for
* later release and zero the inode so that the calling routine
* can release it.
*/
void
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
softdep_setup_freeblocks(ip, length, flags)
struct inode *ip; /* The inode whose length is to be reduced */
off_t length; /* The new length for the file */
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
int flags; /* IO_EXT and/or IO_NORMAL */
{
struct freeblks *freeblks;
struct inodedep *inodedep;
struct allocdirect *adp;
struct bufobj *bo;
struct vnode *vp;
struct buf *bp;
struct fs *fs;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
ufs2_daddr_t extblocks, datablocks;
struct mount *mp;
int i, delay, error;
fs = ip->i_fs;
mp = UFSTOVFS(ip->i_ump);
if (length != 0)
panic("softdep_setup_freeblocks: non-zero length");
MALLOC(freeblks, struct freeblks *, sizeof(struct freeblks),
M_FREEBLKS, M_SOFTDEP_FLAGS|M_ZERO);
workitem_alloc(&freeblks->fb_list, D_FREEBLKS, mp);
freeblks->fb_state = ATTACHED;
freeblks->fb_uid = ip->i_uid;
freeblks->fb_previousinum = ip->i_number;
freeblks->fb_devvp = ip->i_devvp;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
extblocks = 0;
if (fs->fs_magic == FS_UFS2_MAGIC)
extblocks = btodb(fragroundup(fs, ip->i_din2->di_extsize));
datablocks = DIP(ip, i_blocks) - extblocks;
if ((flags & IO_NORMAL) == 0) {
freeblks->fb_oldsize = 0;
freeblks->fb_chkcnt = 0;
} else {
freeblks->fb_oldsize = ip->i_size;
ip->i_size = 0;
DIP_SET(ip, i_size, 0);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
freeblks->fb_chkcnt = datablocks;
for (i = 0; i < NDADDR; i++) {
freeblks->fb_dblks[i] = DIP(ip, i_db[i]);
DIP_SET(ip, i_db[i], 0);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
}
for (i = 0; i < NIADDR; i++) {
freeblks->fb_iblks[i] = DIP(ip, i_ib[i]);
DIP_SET(ip, i_ib[i], 0);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
}
/*
* If the file was removed, then the space being freed was
* accounted for then (see softdep_releasefile()). If the
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
* file is merely being truncated, then we account for it now.
*/
if ((ip->i_flag & IN_SPACECOUNTED) == 0) {
UFS_LOCK(ip->i_ump);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
fs->fs_pendingblocks += datablocks;
UFS_UNLOCK(ip->i_ump);
}
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
}
if ((flags & IO_EXT) == 0) {
freeblks->fb_oldextsize = 0;
} else {
freeblks->fb_oldextsize = ip->i_din2->di_extsize;
ip->i_din2->di_extsize = 0;
freeblks->fb_chkcnt += extblocks;
for (i = 0; i < NXADDR; i++) {
freeblks->fb_eblks[i] = ip->i_din2->di_extb[i];
ip->i_din2->di_extb[i] = 0;
}
}
DIP_SET(ip, i_blocks, DIP(ip, i_blocks) - freeblks->fb_chkcnt);
/*
* Push the zero'ed inode to to its disk buffer so that we are free
* to delete its dependencies below. Once the dependencies are gone
* the buffer can be safely released.
*/
if ((error = bread(ip->i_devvp,
fsbtodb(fs, ino_to_fsba(fs, ip->i_number)),
(int)fs->fs_bsize, NOCRED, &bp)) != 0) {
brelse(bp);
softdep_error("softdep_setup_freeblocks", error);
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (ip->i_ump->um_fstype == UFS1)
*((struct ufs1_dinode *)bp->b_data +
ino_to_fsbo(fs, ip->i_number)) = *ip->i_din1;
else
*((struct ufs2_dinode *)bp->b_data +
ino_to_fsbo(fs, ip->i_number)) = *ip->i_din2;
/*
* Find and eliminate any inode dependencies.
*/
ACQUIRE_LOCK(&lk);
(void) inodedep_lookup(mp, ip->i_number, DEPALLOC, &inodedep);
if ((inodedep->id_state & IOSTARTED) != 0)
panic("softdep_setup_freeblocks: inode busy");
When deleting a file, the ordering of events imposed by soft updates is to first write the deleted directory entry to disk, second write the zero'ed inode to disk, and finally to release the freed blocks and the inode back to the cylinder-group map. As this ordering requires two disk writes to occur which are normally spaced about 30 seconds apart (except when memory is under duress), it takes about a minute from the time that a file is deleted until its inode and data blocks show up in the cylinder-group map for reallocation. If a file has had only a brief lifetime (less than 30 seconds from creation to deletion), neither its inode nor its directory entry may have been written to disk. If its directory entry has not been written to disk, then we need not wait for that directory block to be written as the on-disk directory block does not reference the inode. Similarly, if the allocated inode has never been written to disk, we do not have to wait for it to be written back either as its on-disk representation is still zero'ed out. Thus, in the case of a short lived file, we can simply release the blocks and inode to the cylinder-group map immediately. As the inode and its blocks are released immediately, they are immediately available for other uses. If they are not released for a minute, then other inodes and blocks must be allocated for short lived files, cluttering up the vnode and buffer caches. The previous code was a bit too aggressive in trying to release the blocks and inode back to the cylinder-group map resulting in their being made available when in fact the inode on disk had not yet been zero'ed. This patch takes a more conservative approach to doing the release which avoids doing the release prematurely.
2000-11-14 09:00:25 +00:00
/*
* Add the freeblks structure to the list of operations that
* must await the zero'ed inode being written to disk. If we
* still have a bitmap dependency (delay == 0), then the inode
* has never been written to disk, so we can process the
* freeblks below once we have deleted the dependencies.
*/
delay = (inodedep->id_state & DEPCOMPLETE);
if (delay)
WORKLIST_INSERT(&inodedep->id_bufwait, &freeblks->fb_list);
/*
* Because the file length has been truncated to zero, any
* pending block allocation dependency structures associated
* with this inode are obsolete and can simply be de-allocated.
* We must first merge the two dependency lists to get rid of
* any duplicate freefrag structures, then purge the merged list.
* If we still have a bitmap dependency, then the inode has never
* been written to disk, so we can free any fragments without delay.
*/
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (flags & IO_NORMAL) {
merge_inode_lists(&inodedep->id_newinoupdt,
&inodedep->id_inoupdt);
while ((adp = TAILQ_FIRST(&inodedep->id_inoupdt)) != 0)
free_allocdirect(&inodedep->id_inoupdt, adp, delay);
}
if (flags & IO_EXT) {
merge_inode_lists(&inodedep->id_newextupdt,
&inodedep->id_extupdt);
while ((adp = TAILQ_FIRST(&inodedep->id_extupdt)) != 0)
free_allocdirect(&inodedep->id_extupdt, adp, delay);
}
FREE_LOCK(&lk);
bdwrite(bp);
/*
* We must wait for any I/O in progress to finish so that
* all potential buffers on the dirty list will be visible.
* Once they are all there, walk the list and get rid of
* any dependencies.
*/
vp = ITOV(ip);
bo = &vp->v_bufobj;
BO_LOCK(bo);
drain_output(vp);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
restart:
TAILQ_FOREACH(bp, &bo->bo_dirty.bv_hd, b_bobufs) {
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (((flags & IO_EXT) == 0 && (bp->b_xflags & BX_ALTDATA)) ||
((flags & IO_NORMAL) == 0 &&
(bp->b_xflags & BX_ALTDATA) == 0))
continue;
if ((bp = getdirtybuf(bp, BO_MTX(bo), MNT_WAIT)) == NULL)
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
goto restart;
BO_UNLOCK(bo);
ACQUIRE_LOCK(&lk);
(void) inodedep_lookup(mp, ip->i_number, 0, &inodedep);
deallocate_dependencies(bp, inodedep);
FREE_LOCK(&lk);
bp->b_flags |= B_INVAL | B_NOCACHE;
brelse(bp);
BO_LOCK(bo);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
goto restart;
}
BO_UNLOCK(bo);
ACQUIRE_LOCK(&lk);
if (inodedep_lookup(mp, ip->i_number, 0, &inodedep) != 0)
When deleting a file, the ordering of events imposed by soft updates is to first write the deleted directory entry to disk, second write the zero'ed inode to disk, and finally to release the freed blocks and the inode back to the cylinder-group map. As this ordering requires two disk writes to occur which are normally spaced about 30 seconds apart (except when memory is under duress), it takes about a minute from the time that a file is deleted until its inode and data blocks show up in the cylinder-group map for reallocation. If a file has had only a brief lifetime (less than 30 seconds from creation to deletion), neither its inode nor its directory entry may have been written to disk. If its directory entry has not been written to disk, then we need not wait for that directory block to be written as the on-disk directory block does not reference the inode. Similarly, if the allocated inode has never been written to disk, we do not have to wait for it to be written back either as its on-disk representation is still zero'ed out. Thus, in the case of a short lived file, we can simply release the blocks and inode to the cylinder-group map immediately. As the inode and its blocks are released immediately, they are immediately available for other uses. If they are not released for a minute, then other inodes and blocks must be allocated for short lived files, cluttering up the vnode and buffer caches. The previous code was a bit too aggressive in trying to release the blocks and inode back to the cylinder-group map resulting in their being made available when in fact the inode on disk had not yet been zero'ed. This patch takes a more conservative approach to doing the release which avoids doing the release prematurely.
2000-11-14 09:00:25 +00:00
(void) free_inodedep(inodedep);
if(delay) {
freeblks->fb_state |= DEPCOMPLETE;
/*
* If the inode with zeroed block pointers is now on disk
* we can start freeing blocks. Add freeblks to the worklist
* instead of calling handle_workitem_freeblocks directly as
* it is more likely that additional IO is needed to complete
* the request here than in the !delay case.
*/
if ((freeblks->fb_state & ALLCOMPLETE) == ALLCOMPLETE)
add_to_worklist(&freeblks->fb_list);
}
When deleting a file, the ordering of events imposed by soft updates is to first write the deleted directory entry to disk, second write the zero'ed inode to disk, and finally to release the freed blocks and the inode back to the cylinder-group map. As this ordering requires two disk writes to occur which are normally spaced about 30 seconds apart (except when memory is under duress), it takes about a minute from the time that a file is deleted until its inode and data blocks show up in the cylinder-group map for reallocation. If a file has had only a brief lifetime (less than 30 seconds from creation to deletion), neither its inode nor its directory entry may have been written to disk. If its directory entry has not been written to disk, then we need not wait for that directory block to be written as the on-disk directory block does not reference the inode. Similarly, if the allocated inode has never been written to disk, we do not have to wait for it to be written back either as its on-disk representation is still zero'ed out. Thus, in the case of a short lived file, we can simply release the blocks and inode to the cylinder-group map immediately. As the inode and its blocks are released immediately, they are immediately available for other uses. If they are not released for a minute, then other inodes and blocks must be allocated for short lived files, cluttering up the vnode and buffer caches. The previous code was a bit too aggressive in trying to release the blocks and inode back to the cylinder-group map resulting in their being made available when in fact the inode on disk had not yet been zero'ed. This patch takes a more conservative approach to doing the release which avoids doing the release prematurely.
2000-11-14 09:00:25 +00:00
FREE_LOCK(&lk);
/*
When deleting a file, the ordering of events imposed by soft updates is to first write the deleted directory entry to disk, second write the zero'ed inode to disk, and finally to release the freed blocks and the inode back to the cylinder-group map. As this ordering requires two disk writes to occur which are normally spaced about 30 seconds apart (except when memory is under duress), it takes about a minute from the time that a file is deleted until its inode and data blocks show up in the cylinder-group map for reallocation. If a file has had only a brief lifetime (less than 30 seconds from creation to deletion), neither its inode nor its directory entry may have been written to disk. If its directory entry has not been written to disk, then we need not wait for that directory block to be written as the on-disk directory block does not reference the inode. Similarly, if the allocated inode has never been written to disk, we do not have to wait for it to be written back either as its on-disk representation is still zero'ed out. Thus, in the case of a short lived file, we can simply release the blocks and inode to the cylinder-group map immediately. As the inode and its blocks are released immediately, they are immediately available for other uses. If they are not released for a minute, then other inodes and blocks must be allocated for short lived files, cluttering up the vnode and buffer caches. The previous code was a bit too aggressive in trying to release the blocks and inode back to the cylinder-group map resulting in their being made available when in fact the inode on disk had not yet been zero'ed. This patch takes a more conservative approach to doing the release which avoids doing the release prematurely.
2000-11-14 09:00:25 +00:00
* If the inode has never been written to disk (delay == 0),
* then we can process the freeblks now that we have deleted
* the dependencies.
*/
When deleting a file, the ordering of events imposed by soft updates is to first write the deleted directory entry to disk, second write the zero'ed inode to disk, and finally to release the freed blocks and the inode back to the cylinder-group map. As this ordering requires two disk writes to occur which are normally spaced about 30 seconds apart (except when memory is under duress), it takes about a minute from the time that a file is deleted until its inode and data blocks show up in the cylinder-group map for reallocation. If a file has had only a brief lifetime (less than 30 seconds from creation to deletion), neither its inode nor its directory entry may have been written to disk. If its directory entry has not been written to disk, then we need not wait for that directory block to be written as the on-disk directory block does not reference the inode. Similarly, if the allocated inode has never been written to disk, we do not have to wait for it to be written back either as its on-disk representation is still zero'ed out. Thus, in the case of a short lived file, we can simply release the blocks and inode to the cylinder-group map immediately. As the inode and its blocks are released immediately, they are immediately available for other uses. If they are not released for a minute, then other inodes and blocks must be allocated for short lived files, cluttering up the vnode and buffer caches. The previous code was a bit too aggressive in trying to release the blocks and inode back to the cylinder-group map resulting in their being made available when in fact the inode on disk had not yet been zero'ed. This patch takes a more conservative approach to doing the release which avoids doing the release prematurely.
2000-11-14 09:00:25 +00:00
if (!delay)
handle_workitem_freeblocks(freeblks, 0);
}
/*
* Reclaim any dependency structures from a buffer that is about to
* be reallocated to a new vnode. The buffer must be locked, thus,
* no I/O completion operations can occur while we are manipulating
* its associated dependencies. The mutex is held so that other I/O's
* associated with related dependencies do not occur.
*/
static void
deallocate_dependencies(bp, inodedep)
struct buf *bp;
struct inodedep *inodedep;
{
struct worklist *wk;
struct indirdep *indirdep;
struct allocindir *aip;
struct pagedep *pagedep;
struct dirrem *dirrem;
struct diradd *dap;
int i;
mtx_assert(&lk, MA_OWNED);
while ((wk = LIST_FIRST(&bp->b_dep)) != NULL) {
switch (wk->wk_type) {
case D_INDIRDEP:
indirdep = WK_INDIRDEP(wk);
/*
* None of the indirect pointers will ever be visible,
* so they can simply be tossed. GOINGAWAY ensures
* that allocated pointers will be saved in the buffer
* cache until they are freed. Note that they will
* only be able to be found by their physical address
* since the inode mapping the logical address will
* be gone. The save buffer used for the safe copy
* was allocated in setup_allocindir_phase2 using
* the physical address so it could be used for this
* purpose. Hence we swap the safe copy with the real
* copy, allowing the safe copy to be freed and holding
* on to the real copy for later use in indir_trunc.
*/
if (indirdep->ir_state & GOINGAWAY)
panic("deallocate_dependencies: already gone");
indirdep->ir_state |= GOINGAWAY;
VFSTOUFS(bp->b_vp->v_mount)->um_numindirdeps += 1;
while ((aip = LIST_FIRST(&indirdep->ir_deplisthd)) != 0)
free_allocindir(aip, inodedep);
if (bp->b_lblkno >= 0 ||
bp->b_blkno != indirdep->ir_savebp->b_lblkno)
panic("deallocate_dependencies: not indir");
bcopy(bp->b_data, indirdep->ir_savebp->b_data,
bp->b_bcount);
WORKLIST_REMOVE(wk);
WORKLIST_INSERT(&indirdep->ir_savebp->b_dep, wk);
continue;
case D_PAGEDEP:
pagedep = WK_PAGEDEP(wk);
/*
* None of the directory additions will ever be
* visible, so they can simply be tossed.
*/
for (i = 0; i < DAHASHSZ; i++)
while ((dap =
LIST_FIRST(&pagedep->pd_diraddhd[i])))
free_diradd(dap);
while ((dap = LIST_FIRST(&pagedep->pd_pendinghd)) != 0)
free_diradd(dap);
/*
* Copy any directory remove dependencies to the list
* to be processed after the zero'ed inode is written.
* If the inode has already been written, then they
* can be dumped directly onto the work list.
*/
LIST_FOREACH(dirrem, &pagedep->pd_dirremhd, dm_next) {
LIST_REMOVE(dirrem, dm_next);
dirrem->dm_dirinum = pagedep->pd_ino;
if (inodedep == NULL ||
(inodedep->id_state & ALLCOMPLETE) ==
ALLCOMPLETE)
add_to_worklist(&dirrem->dm_list);
else
WORKLIST_INSERT(&inodedep->id_bufwait,
&dirrem->dm_list);
}
if ((pagedep->pd_state & NEWBLOCK) != 0) {
LIST_FOREACH(wk, &inodedep->id_bufwait, wk_list)
if (wk->wk_type == D_NEWDIRBLK &&
WK_NEWDIRBLK(wk)->db_pagedep ==
pagedep)
break;
if (wk != NULL) {
WORKLIST_REMOVE(wk);
free_newdirblk(WK_NEWDIRBLK(wk));
} else
panic("deallocate_dependencies: "
"lost pagedep");
}
WORKLIST_REMOVE(&pagedep->pd_list);
LIST_REMOVE(pagedep, pd_hash);
WORKITEM_FREE(pagedep, D_PAGEDEP);
continue;
case D_ALLOCINDIR:
free_allocindir(WK_ALLOCINDIR(wk), inodedep);
continue;
case D_ALLOCDIRECT:
case D_INODEDEP:
panic("deallocate_dependencies: Unexpected type %s",
TYPENAME(wk->wk_type));
/* NOTREACHED */
default:
panic("deallocate_dependencies: Unknown type %s",
TYPENAME(wk->wk_type));
/* NOTREACHED */
}
}
}
/*
* Free an allocdirect. Generate a new freefrag work request if appropriate.
* This routine must be called with splbio interrupts blocked.
*/
static void
free_allocdirect(adphead, adp, delay)
struct allocdirectlst *adphead;
struct allocdirect *adp;
int delay;
{
struct newdirblk *newdirblk;
struct worklist *wk;
mtx_assert(&lk, MA_OWNED);
if ((adp->ad_state & DEPCOMPLETE) == 0)
LIST_REMOVE(adp, ad_deps);
TAILQ_REMOVE(adphead, adp, ad_next);
if ((adp->ad_state & COMPLETE) == 0)
WORKLIST_REMOVE(&adp->ad_list);
if (adp->ad_freefrag != NULL) {
if (delay)
WORKLIST_INSERT(&adp->ad_inodedep->id_bufwait,
&adp->ad_freefrag->ff_list);
else
add_to_worklist(&adp->ad_freefrag->ff_list);
}
if ((wk = LIST_FIRST(&adp->ad_newdirblk)) != NULL) {
newdirblk = WK_NEWDIRBLK(wk);
WORKLIST_REMOVE(&newdirblk->db_list);
2007-04-04 07:29:53 +00:00
if (!LIST_EMPTY(&adp->ad_newdirblk))
panic("free_allocdirect: extra newdirblk");
if (delay)
WORKLIST_INSERT(&adp->ad_inodedep->id_bufwait,
&newdirblk->db_list);
else
free_newdirblk(newdirblk);
}
WORKITEM_FREE(adp, D_ALLOCDIRECT);
}
/*
* Free a newdirblk. Clear the NEWBLOCK flag on its associated pagedep.
* This routine must be called with splbio interrupts blocked.
*/
static void
free_newdirblk(newdirblk)
struct newdirblk *newdirblk;
{
struct pagedep *pagedep;
struct diradd *dap;
int i;
mtx_assert(&lk, MA_OWNED);
/*
* If the pagedep is still linked onto the directory buffer
* dependency chain, then some of the entries on the
* pd_pendinghd list may not be committed to disk yet. In
* this case, we will simply clear the NEWBLOCK flag and
* let the pd_pendinghd list be processed when the pagedep
* is next written. If the pagedep is no longer on the buffer
* dependency chain, then all the entries on the pd_pending
* list are committed to disk and we can free them here.
*/
pagedep = newdirblk->db_pagedep;
pagedep->pd_state &= ~NEWBLOCK;
if ((pagedep->pd_state & ONWORKLIST) == 0)
while ((dap = LIST_FIRST(&pagedep->pd_pendinghd)) != NULL)
free_diradd(dap);
/*
* If no dependencies remain, the pagedep will be freed.
*/
for (i = 0; i < DAHASHSZ; i++)
2007-04-04 07:29:53 +00:00
if (!LIST_EMPTY(&pagedep->pd_diraddhd[i]))
break;
if (i == DAHASHSZ && (pagedep->pd_state & ONWORKLIST) == 0) {
LIST_REMOVE(pagedep, pd_hash);
WORKITEM_FREE(pagedep, D_PAGEDEP);
}
WORKITEM_FREE(newdirblk, D_NEWDIRBLK);
}
/*
* Prepare an inode to be freed. The actual free operation is not
* done until the zero'ed inode has been written to disk.
*/
void
softdep_freefile(pvp, ino, mode)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct vnode *pvp;
ino_t ino;
int mode;
{
struct inode *ip = VTOI(pvp);
struct inodedep *inodedep;
struct freefile *freefile;
/*
* This sets up the inode de-allocation dependency.
*/
MALLOC(freefile, struct freefile *, sizeof(struct freefile),
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
M_FREEFILE, M_SOFTDEP_FLAGS);
workitem_alloc(&freefile->fx_list, D_FREEFILE, pvp->v_mount);
freefile->fx_mode = mode;
freefile->fx_oldinum = ino;
freefile->fx_devvp = ip->i_devvp;
if ((ip->i_flag & IN_SPACECOUNTED) == 0) {
UFS_LOCK(ip->i_ump);
ip->i_fs->fs_pendinginodes += 1;
UFS_UNLOCK(ip->i_ump);
}
/*
* If the inodedep does not exist, then the zero'ed inode has
* been written to disk. If the allocated inode has never been
* written to disk, then the on-disk inode is zero'ed. In either
* case we can free the file immediately.
*/
ACQUIRE_LOCK(&lk);
if (inodedep_lookup(pvp->v_mount, ino, 0, &inodedep) == 0 ||
check_inode_unwritten(inodedep)) {
FREE_LOCK(&lk);
handle_workitem_freefile(freefile);
return;
}
WORKLIST_INSERT(&inodedep->id_inowait, &freefile->fx_list);
FREE_LOCK(&lk);
ip->i_flag |= IN_MODIFIED;
}
/*
* Check to see if an inode has never been written to disk. If
* so free the inodedep and return success, otherwise return failure.
* This routine must be called with splbio interrupts blocked.
*
* If we still have a bitmap dependency, then the inode has never
* been written to disk. Drop the dependency as it is no longer
* necessary since the inode is being deallocated. We set the
* ALLCOMPLETE flags since the bitmap now properly shows that the
* inode is not allocated. Even if the inode is actively being
* written, it has been rolled back to its zero'ed state, so we
* are ensured that a zero inode is what is on the disk. For short
* lived files, this change will usually result in removing all the
* dependencies from the inode so that it can be freed immediately.
*/
static int
check_inode_unwritten(inodedep)
struct inodedep *inodedep;
{
mtx_assert(&lk, MA_OWNED);
if ((inodedep->id_state & DEPCOMPLETE) != 0 ||
2007-04-04 07:29:53 +00:00
!LIST_EMPTY(&inodedep->id_pendinghd) ||
!LIST_EMPTY(&inodedep->id_bufwait) ||
!LIST_EMPTY(&inodedep->id_inowait) ||
!TAILQ_EMPTY(&inodedep->id_inoupdt) ||
!TAILQ_EMPTY(&inodedep->id_newinoupdt) ||
!TAILQ_EMPTY(&inodedep->id_extupdt) ||
!TAILQ_EMPTY(&inodedep->id_newextupdt) ||
inodedep->id_nlinkdelta != 0)
return (0);
/*
* Another process might be in initiate_write_inodeblock_ufs[12]
* trying to allocate memory without holding "Softdep Lock".
*/
if ((inodedep->id_state & IOSTARTED) != 0 &&
inodedep->id_savedino1 == NULL)
return (0);
inodedep->id_state |= ALLCOMPLETE;
LIST_REMOVE(inodedep, id_deps);
inodedep->id_buf = NULL;
if (inodedep->id_state & ONWORKLIST)
WORKLIST_REMOVE(&inodedep->id_list);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (inodedep->id_savedino1 != NULL) {
FREE(inodedep->id_savedino1, M_SAVEDINO);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
inodedep->id_savedino1 = NULL;
}
if (free_inodedep(inodedep) == 0)
panic("check_inode_unwritten: busy inode");
return (1);
}
/*
* Try to free an inodedep structure. Return 1 if it could be freed.
*/
static int
free_inodedep(inodedep)
struct inodedep *inodedep;
{
mtx_assert(&lk, MA_OWNED);
if ((inodedep->id_state & ONWORKLIST) != 0 ||
(inodedep->id_state & ALLCOMPLETE) != ALLCOMPLETE ||
2007-04-04 07:29:53 +00:00
!LIST_EMPTY(&inodedep->id_pendinghd) ||
!LIST_EMPTY(&inodedep->id_bufwait) ||
!LIST_EMPTY(&inodedep->id_inowait) ||
!TAILQ_EMPTY(&inodedep->id_inoupdt) ||
!TAILQ_EMPTY(&inodedep->id_newinoupdt) ||
!TAILQ_EMPTY(&inodedep->id_extupdt) ||
!TAILQ_EMPTY(&inodedep->id_newextupdt) ||
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
inodedep->id_nlinkdelta != 0 || inodedep->id_savedino1 != NULL)
return (0);
LIST_REMOVE(inodedep, id_hash);
WORKITEM_FREE(inodedep, D_INODEDEP);
num_inodedep -= 1;
return (1);
}
/*
* This workitem routine performs the block de-allocation.
* The workitem is added to the pending list after the updated
* inode block has been written to disk. As mentioned above,
* checks regarding the number of blocks de-allocated (compared
* to the number of blocks allocated for the file) are also
* performed in this function.
*/
static void
handle_workitem_freeblocks(freeblks, flags)
struct freeblks *freeblks;
int flags;
{
struct inode *ip;
struct vnode *vp;
struct fs *fs;
struct ufsmount *ump;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int i, nblocks, level, bsize;
ufs2_daddr_t bn, blocksreleased = 0;
int error, allerror = 0;
ufs_lbn_t baselbns[NIADDR], tmpval;
int fs_pendingblocks;
ump = VFSTOUFS(freeblks->fb_list.wk_mp);
fs = ump->um_fs;
fs_pendingblocks = 0;
tmpval = 1;
baselbns[0] = NDADDR;
for (i = 1; i < NIADDR; i++) {
tmpval *= NINDIR(fs);
baselbns[i] = baselbns[i - 1] + tmpval;
}
nblocks = btodb(fs->fs_bsize);
blocksreleased = 0;
/*
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
* Release all extended attribute blocks or frags.
*/
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (freeblks->fb_oldextsize > 0) {
for (i = (NXADDR - 1); i >= 0; i--) {
if ((bn = freeblks->fb_eblks[i]) == 0)
continue;
bsize = sblksize(fs, freeblks->fb_oldextsize, i);
ffs_blkfree(ump, fs, freeblks->fb_devvp, bn, bsize,
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
freeblks->fb_previousinum);
blocksreleased += btodb(bsize);
}
}
/*
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
* Release all data blocks or frags.
*/
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (freeblks->fb_oldsize > 0) {
/*
* Indirect blocks first.
*/
for (level = (NIADDR - 1); level >= 0; level--) {
if ((bn = freeblks->fb_iblks[level]) == 0)
continue;
if ((error = indir_trunc(freeblks, fsbtodb(fs, bn),
level, baselbns[level], &blocksreleased)) != 0)
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
allerror = error;
ffs_blkfree(ump, fs, freeblks->fb_devvp, bn,
fs->fs_bsize, freeblks->fb_previousinum);
fs_pendingblocks += nblocks;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
blocksreleased += nblocks;
}
/*
* All direct blocks or frags.
*/
for (i = (NDADDR - 1); i >= 0; i--) {
if ((bn = freeblks->fb_dblks[i]) == 0)
continue;
bsize = sblksize(fs, freeblks->fb_oldsize, i);
ffs_blkfree(ump, fs, freeblks->fb_devvp, bn, bsize,
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
freeblks->fb_previousinum);
fs_pendingblocks += btodb(bsize);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
blocksreleased += btodb(bsize);
}
}
UFS_LOCK(ump);
fs->fs_pendingblocks -= fs_pendingblocks;
UFS_UNLOCK(ump);
/*
* If we still have not finished background cleanup, then check
* to see if the block count needs to be adjusted.
*/
if (freeblks->fb_chkcnt != blocksreleased &&
(fs->fs_flags & FS_UNCLEAN) != 0 &&
ffs_vget(freeblks->fb_list.wk_mp, freeblks->fb_previousinum,
(flags & LK_NOWAIT) | LK_EXCLUSIVE, &vp) == 0) {
ip = VTOI(vp);
DIP_SET(ip, i_blocks, DIP(ip, i_blocks) + \
freeblks->fb_chkcnt - blocksreleased);
ip->i_flag |= IN_CHANGE;
vput(vp);
}
#ifdef INVARIANTS
if (freeblks->fb_chkcnt != blocksreleased &&
((fs->fs_flags & FS_UNCLEAN) == 0 || (flags & LK_NOWAIT) != 0))
printf("handle_workitem_freeblocks: block count\n");
if (allerror)
softdep_error("handle_workitem_freeblks", allerror);
#endif /* INVARIANTS */
ACQUIRE_LOCK(&lk);
WORKITEM_FREE(freeblks, D_FREEBLKS);
FREE_LOCK(&lk);
}
/*
* Release blocks associated with the inode ip and stored in the indirect
* block dbn. If level is greater than SINGLE, the block is an indirect block
* and recursive calls to indirtrunc must be used to cleanse other indirect
* blocks.
*/
static int
indir_trunc(freeblks, dbn, level, lbn, countp)
struct freeblks *freeblks;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t dbn;
int level;
ufs_lbn_t lbn;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t *countp;
{
struct buf *bp;
struct fs *fs;
struct worklist *wk;
struct indirdep *indirdep;
struct ufsmount *ump;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs1_daddr_t *bap1 = 0;
ufs2_daddr_t nb, *bap2 = 0;
ufs_lbn_t lbnadd;
int i, nblocks, ufs1fmt;
int error, allerror = 0;
int fs_pendingblocks;
ump = VFSTOUFS(freeblks->fb_list.wk_mp);
fs = ump->um_fs;
fs_pendingblocks = 0;
lbnadd = 1;
for (i = level; i > 0; i--)
lbnadd *= NINDIR(fs);
/*
* Get buffer of block pointers to be freed. This routine is not
* called until the zero'ed inode has been written, so it is safe
* to free blocks as they are encountered. Because the inode has
* been zero'ed, calls to bmap on these blocks will fail. So, we
* have to use the on-disk address and the block device for the
* filesystem to look them up. If the file was deleted before its
* indirect blocks were all written to disk, the routine that set
* us up (deallocate_dependencies) will have arranged to leave
* a complete copy of the indirect block in memory for our use.
* Otherwise we have to read the blocks in from the disk.
*/
#ifdef notyet
bp = getblk(freeblks->fb_devvp, dbn, (int)fs->fs_bsize, 0, 0,
GB_NOCREAT);
#else
bp = incore(&freeblks->fb_devvp->v_bufobj, dbn);
#endif
ACQUIRE_LOCK(&lk);
if (bp != NULL && (wk = LIST_FIRST(&bp->b_dep)) != NULL) {
if (wk->wk_type != D_INDIRDEP ||
(indirdep = WK_INDIRDEP(wk))->ir_savebp != bp ||
(indirdep->ir_state & GOINGAWAY) == 0)
panic("indir_trunc: lost indirdep");
WORKLIST_REMOVE(wk);
WORKITEM_FREE(indirdep, D_INDIRDEP);
2007-04-04 07:29:53 +00:00
if (!LIST_EMPTY(&bp->b_dep))
panic("indir_trunc: dangling dep");
ump->um_numindirdeps -= 1;
FREE_LOCK(&lk);
} else {
#ifdef notyet
if (bp)
brelse(bp);
#endif
FREE_LOCK(&lk);
error = bread(freeblks->fb_devvp, dbn, (int)fs->fs_bsize,
NOCRED, &bp);
if (error) {
brelse(bp);
return (error);
}
}
/*
* Recursively free indirect blocks.
*/
if (ump->um_fstype == UFS1) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs1fmt = 1;
bap1 = (ufs1_daddr_t *)bp->b_data;
} else {
ufs1fmt = 0;
bap2 = (ufs2_daddr_t *)bp->b_data;
}
nblocks = btodb(fs->fs_bsize);
for (i = NINDIR(fs) - 1; i >= 0; i--) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (ufs1fmt)
nb = bap1[i];
else
nb = bap2[i];
if (nb == 0)
continue;
if (level != 0) {
if ((error = indir_trunc(freeblks, fsbtodb(fs, nb),
level - 1, lbn + (i * lbnadd), countp)) != 0)
allerror = error;
}
ffs_blkfree(ump, fs, freeblks->fb_devvp, nb, fs->fs_bsize,
freeblks->fb_previousinum);
fs_pendingblocks += nblocks;
*countp += nblocks;
}
UFS_LOCK(ump);
fs->fs_pendingblocks -= fs_pendingblocks;
UFS_UNLOCK(ump);
bp->b_flags |= B_INVAL | B_NOCACHE;
brelse(bp);
return (allerror);
}
/*
* Free an allocindir.
* This routine must be called with splbio interrupts blocked.
*/
static void
free_allocindir(aip, inodedep)
struct allocindir *aip;
struct inodedep *inodedep;
{
struct freefrag *freefrag;
mtx_assert(&lk, MA_OWNED);
if ((aip->ai_state & DEPCOMPLETE) == 0)
LIST_REMOVE(aip, ai_deps);
if (aip->ai_state & ONWORKLIST)
WORKLIST_REMOVE(&aip->ai_list);
LIST_REMOVE(aip, ai_next);
if ((freefrag = aip->ai_freefrag) != NULL) {
if (inodedep == NULL)
add_to_worklist(&freefrag->ff_list);
else
WORKLIST_INSERT(&inodedep->id_bufwait,
&freefrag->ff_list);
}
WORKITEM_FREE(aip, D_ALLOCINDIR);
}
/*
* Directory entry addition dependencies.
*
* When adding a new directory entry, the inode (with its incremented link
* count) must be written to disk before the directory entry's pointer to it.
* Also, if the inode is newly allocated, the corresponding freemap must be
* updated (on disk) before the directory entry's pointer. These requirements
* are met via undo/redo on the directory entry's pointer, which consists
* simply of the inode number.
*
* As directory entries are added and deleted, the free space within a
2002-05-16 21:28:32 +00:00
* directory block can become fragmented. The ufs filesystem will compact
* a fragmented directory block to make space for a new entry. When this
* occurs, the offsets of previously added entries change. Any "diradd"
* dependency structures corresponding to these entries must be updated with
* the new offsets.
*/
/*
* This routine is called after the in-memory inode's link
* count has been incremented, but before the directory entry's
* pointer to the inode has been set.
*/
int
softdep_setup_directory_add(bp, dp, diroffset, newinum, newdirbp, isnewblk)
struct buf *bp; /* buffer containing directory block */
struct inode *dp; /* inode for directory */
off_t diroffset; /* offset of new entry in directory */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ino_t newinum; /* inode referenced by new directory entry */
struct buf *newdirbp; /* non-NULL => contents of new mkdir */
int isnewblk; /* entry is in a newly allocated block */
{
int offset; /* offset of new entry within directory block */
ufs_lbn_t lbn; /* block in directory containing new entry */
struct fs *fs;
struct diradd *dap;
struct allocdirect *adp;
struct pagedep *pagedep;
struct inodedep *inodedep;
struct newdirblk *newdirblk = 0;
struct mkdir *mkdir1, *mkdir2;
struct mount *mp;
/*
* Whiteouts have no dependencies.
*/
if (newinum == WINO) {
if (newdirbp != NULL)
bdwrite(newdirbp);
return (0);
}
mp = UFSTOVFS(dp->i_ump);
fs = dp->i_fs;
lbn = lblkno(fs, diroffset);
offset = blkoff(fs, diroffset);
MALLOC(dap, struct diradd *, sizeof(struct diradd), M_DIRADD,
M_SOFTDEP_FLAGS|M_ZERO);
workitem_alloc(&dap->da_list, D_DIRADD, mp);
dap->da_offset = offset;
dap->da_newinum = newinum;
dap->da_state = ATTACHED;
if (isnewblk && lbn < NDADDR && fragoff(fs, diroffset) == 0) {
MALLOC(newdirblk, struct newdirblk *, sizeof(struct newdirblk),
M_NEWDIRBLK, M_SOFTDEP_FLAGS);
workitem_alloc(&newdirblk->db_list, D_NEWDIRBLK, mp);
}
if (newdirbp == NULL) {
dap->da_state |= DEPCOMPLETE;
ACQUIRE_LOCK(&lk);
} else {
dap->da_state |= MKDIR_BODY | MKDIR_PARENT;
MALLOC(mkdir1, struct mkdir *, sizeof(struct mkdir), M_MKDIR,
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
M_SOFTDEP_FLAGS);
workitem_alloc(&mkdir1->md_list, D_MKDIR, mp);
mkdir1->md_state = MKDIR_BODY;
mkdir1->md_diradd = dap;
MALLOC(mkdir2, struct mkdir *, sizeof(struct mkdir), M_MKDIR,
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
M_SOFTDEP_FLAGS);
workitem_alloc(&mkdir2->md_list, D_MKDIR, mp);
mkdir2->md_state = MKDIR_PARENT;
mkdir2->md_diradd = dap;
/*
* Dependency on "." and ".." being written to disk.
*/
mkdir1->md_buf = newdirbp;
ACQUIRE_LOCK(&lk);
LIST_INSERT_HEAD(&mkdirlisthd, mkdir1, md_mkdirs);
WORKLIST_INSERT(&newdirbp->b_dep, &mkdir1->md_list);
FREE_LOCK(&lk);
bdwrite(newdirbp);
/*
* Dependency on link count increase for parent directory
*/
ACQUIRE_LOCK(&lk);
if (inodedep_lookup(mp, dp->i_number, 0, &inodedep) == 0
|| (inodedep->id_state & ALLCOMPLETE) == ALLCOMPLETE) {
dap->da_state &= ~MKDIR_PARENT;
WORKITEM_FREE(mkdir2, D_MKDIR);
} else {
LIST_INSERT_HEAD(&mkdirlisthd, mkdir2, md_mkdirs);
WORKLIST_INSERT(&inodedep->id_bufwait,&mkdir2->md_list);
}
}
/*
* Link into parent directory pagedep to await its being written.
*/
if (pagedep_lookup(dp, lbn, DEPALLOC, &pagedep) == 0)
WORKLIST_INSERT(&bp->b_dep, &pagedep->pd_list);
dap->da_pagedep = pagedep;
LIST_INSERT_HEAD(&pagedep->pd_diraddhd[DIRADDHASH(offset)], dap,
da_pdlist);
/*
* Link into its inodedep. Put it on the id_bufwait list if the inode
* is not yet written. If it is written, do the post-inode write
* processing to put it on the id_pendinghd list.
*/
(void) inodedep_lookup(mp, newinum, DEPALLOC, &inodedep);
if ((inodedep->id_state & ALLCOMPLETE) == ALLCOMPLETE)
diradd_inode_written(dap, inodedep);
else
WORKLIST_INSERT(&inodedep->id_bufwait, &dap->da_list);
if (isnewblk) {
/*
* Directories growing into indirect blocks are rare
* enough and the frequency of new block allocation
* in those cases even more rare, that we choose not
* to bother tracking them. Rather we simply force the
* new directory entry to disk.
*/
if (lbn >= NDADDR) {
FREE_LOCK(&lk);
/*
* We only have a new allocation when at the
* beginning of a new block, not when we are
* expanding into an existing block.
*/
if (blkoff(fs, diroffset) == 0)
return (1);
return (0);
}
/*
* We only have a new allocation when at the beginning
* of a new fragment, not when we are expanding into an
* existing fragment. Also, there is nothing to do if we
* are already tracking this block.
*/
if (fragoff(fs, diroffset) != 0) {
FREE_LOCK(&lk);
return (0);
}
if ((pagedep->pd_state & NEWBLOCK) != 0) {
WORKITEM_FREE(newdirblk, D_NEWDIRBLK);
FREE_LOCK(&lk);
return (0);
}
/*
* Find our associated allocdirect and have it track us.
*/
if (inodedep_lookup(mp, dp->i_number, 0, &inodedep) == 0)
panic("softdep_setup_directory_add: lost inodedep");
adp = TAILQ_LAST(&inodedep->id_newinoupdt, allocdirectlst);
if (adp == NULL || adp->ad_lbn != lbn)
panic("softdep_setup_directory_add: lost entry");
pagedep->pd_state |= NEWBLOCK;
newdirblk->db_pagedep = pagedep;
WORKLIST_INSERT(&adp->ad_newdirblk, &newdirblk->db_list);
}
FREE_LOCK(&lk);
return (0);
}
/*
* This procedure is called to change the offset of a directory
* entry when compacting a directory block which must be owned
* exclusively by the caller. Note that the actual entry movement
* must be done in this procedure to ensure that no I/O completions
* occur while the move is in progress.
*/
void
softdep_change_directoryentry_offset(dp, base, oldloc, newloc, entrysize)
struct inode *dp; /* inode for directory */
caddr_t base; /* address of dp->i_offset */
caddr_t oldloc; /* address of old directory location */
caddr_t newloc; /* address of new directory location */
int entrysize; /* size of directory entry */
{
int offset, oldoffset, newoffset;
struct pagedep *pagedep;
struct diradd *dap;
ufs_lbn_t lbn;
ACQUIRE_LOCK(&lk);
lbn = lblkno(dp->i_fs, dp->i_offset);
offset = blkoff(dp->i_fs, dp->i_offset);
if (pagedep_lookup(dp, lbn, 0, &pagedep) == 0)
goto done;
oldoffset = offset + (oldloc - base);
newoffset = offset + (newloc - base);
2001-02-04 12:37:48 +00:00
LIST_FOREACH(dap, &pagedep->pd_diraddhd[DIRADDHASH(oldoffset)], da_pdlist) {
if (dap->da_offset != oldoffset)
continue;
dap->da_offset = newoffset;
if (DIRADDHASH(newoffset) == DIRADDHASH(oldoffset))
break;
LIST_REMOVE(dap, da_pdlist);
LIST_INSERT_HEAD(&pagedep->pd_diraddhd[DIRADDHASH(newoffset)],
dap, da_pdlist);
break;
}
if (dap == NULL) {
2001-02-04 12:37:48 +00:00
LIST_FOREACH(dap, &pagedep->pd_pendinghd, da_pdlist) {
if (dap->da_offset == oldoffset) {
dap->da_offset = newoffset;
break;
}
}
}
done:
bcopy(oldloc, newloc, entrysize);
FREE_LOCK(&lk);
}
/*
* Free a diradd dependency structure. This routine must be called
* with splbio interrupts blocked.
*/
static void
free_diradd(dap)
struct diradd *dap;
{
struct dirrem *dirrem;
struct pagedep *pagedep;
struct inodedep *inodedep;
struct mkdir *mkdir, *nextmd;
mtx_assert(&lk, MA_OWNED);
WORKLIST_REMOVE(&dap->da_list);
LIST_REMOVE(dap, da_pdlist);
if ((dap->da_state & DIRCHG) == 0) {
pagedep = dap->da_pagedep;
} else {
dirrem = dap->da_previous;
pagedep = dirrem->dm_pagedep;
dirrem->dm_dirinum = pagedep->pd_ino;
add_to_worklist(&dirrem->dm_list);
}
if (inodedep_lookup(pagedep->pd_list.wk_mp, dap->da_newinum,
0, &inodedep) != 0)
(void) free_inodedep(inodedep);
if ((dap->da_state & (MKDIR_PARENT | MKDIR_BODY)) != 0) {
for (mkdir = LIST_FIRST(&mkdirlisthd); mkdir; mkdir = nextmd) {
nextmd = LIST_NEXT(mkdir, md_mkdirs);
if (mkdir->md_diradd != dap)
continue;
dap->da_state &= ~mkdir->md_state;
WORKLIST_REMOVE(&mkdir->md_list);
LIST_REMOVE(mkdir, md_mkdirs);
WORKITEM_FREE(mkdir, D_MKDIR);
}
if ((dap->da_state & (MKDIR_PARENT | MKDIR_BODY)) != 0)
panic("free_diradd: unfound ref");
}
WORKITEM_FREE(dap, D_DIRADD);
}
/*
* Directory entry removal dependencies.
*
* When removing a directory entry, the entry's inode pointer must be
* zero'ed on disk before the corresponding inode's link count is decremented
* (possibly freeing the inode for re-use). This dependency is handled by
* updating the directory entry but delaying the inode count reduction until
* after the directory block has been written to disk. After this point, the
* inode count can be decremented whenever it is convenient.
*/
/*
* This routine should be called immediately after removing
* a directory entry. The inode's link count should not be
* decremented by the calling procedure -- the soft updates
* code will do this task when it is safe.
*/
void
softdep_setup_remove(bp, dp, ip, isrmdir)
struct buf *bp; /* buffer containing directory block */
struct inode *dp; /* inode for the directory being modified */
struct inode *ip; /* inode for directory entry being removed */
int isrmdir; /* indicates if doing RMDIR */
{
struct dirrem *dirrem, *prevdirrem;
/*
* Allocate a new dirrem if appropriate and ACQUIRE_LOCK.
*/
dirrem = newdirrem(bp, dp, ip, isrmdir, &prevdirrem);
/*
* If the COMPLETE flag is clear, then there were no active
* entries and we want to roll back to a zeroed entry until
* the new inode is committed to disk. If the COMPLETE flag is
* set then we have deleted an entry that never made it to
* disk. If the entry we deleted resulted from a name change,
* then the old name still resides on disk. We cannot delete
* its inode (returned to us in prevdirrem) until the zeroed
* directory entry gets to disk. The new inode has never been
* referenced on the disk, so can be deleted immediately.
*/
if ((dirrem->dm_state & COMPLETE) == 0) {
LIST_INSERT_HEAD(&dirrem->dm_pagedep->pd_dirremhd, dirrem,
dm_next);
FREE_LOCK(&lk);
} else {
if (prevdirrem != NULL)
LIST_INSERT_HEAD(&dirrem->dm_pagedep->pd_dirremhd,
prevdirrem, dm_next);
dirrem->dm_dirinum = dirrem->dm_pagedep->pd_ino;
FREE_LOCK(&lk);
handle_workitem_remove(dirrem, NULL);
}
}
/*
* Allocate a new dirrem if appropriate and return it along with
* its associated pagedep. Called without a lock, returns with lock.
*/
static long num_dirrem; /* number of dirrem allocated */
static struct dirrem *
newdirrem(bp, dp, ip, isrmdir, prevdirremp)
struct buf *bp; /* buffer containing directory block */
struct inode *dp; /* inode for the directory being modified */
struct inode *ip; /* inode for directory entry being removed */
int isrmdir; /* indicates if doing RMDIR */
struct dirrem **prevdirremp; /* previously referenced inode, if any */
{
int offset;
ufs_lbn_t lbn;
struct diradd *dap;
struct dirrem *dirrem;
struct pagedep *pagedep;
/*
* Whiteouts have no deletion dependencies.
*/
if (ip == NULL)
panic("newdirrem: whiteout");
/*
* If we are over our limit, try to improve the situation.
* Limiting the number of dirrem structures will also limit
* the number of freefile and freeblks structures.
*/
ACQUIRE_LOCK(&lk);
if (num_dirrem > max_softdeps / 2)
(void) request_cleanup(ITOV(dp)->v_mount, FLUSH_REMOVE);
num_dirrem += 1;
FREE_LOCK(&lk);
MALLOC(dirrem, struct dirrem *, sizeof(struct dirrem),
M_DIRREM, M_SOFTDEP_FLAGS|M_ZERO);
workitem_alloc(&dirrem->dm_list, D_DIRREM, ITOV(dp)->v_mount);
dirrem->dm_state = isrmdir ? RMDIR : 0;
dirrem->dm_oldinum = ip->i_number;
*prevdirremp = NULL;
ACQUIRE_LOCK(&lk);
lbn = lblkno(dp->i_fs, dp->i_offset);
offset = blkoff(dp->i_fs, dp->i_offset);
if (pagedep_lookup(dp, lbn, DEPALLOC, &pagedep) == 0)
WORKLIST_INSERT(&bp->b_dep, &pagedep->pd_list);
dirrem->dm_pagedep = pagedep;
/*
* Check for a diradd dependency for the same directory entry.
* If present, then both dependencies become obsolete and can
* be de-allocated. Check for an entry on both the pd_dirraddhd
* list and the pd_pendinghd list.
*/
2001-02-04 12:37:48 +00:00
LIST_FOREACH(dap, &pagedep->pd_diraddhd[DIRADDHASH(offset)], da_pdlist)
if (dap->da_offset == offset)
break;
if (dap == NULL) {
2001-02-04 12:37:48 +00:00
LIST_FOREACH(dap, &pagedep->pd_pendinghd, da_pdlist)
if (dap->da_offset == offset)
break;
if (dap == NULL)
return (dirrem);
}
/*
* Must be ATTACHED at this point.
*/
if ((dap->da_state & ATTACHED) == 0)
panic("newdirrem: not ATTACHED");
if (dap->da_newinum != ip->i_number)
panic("newdirrem: inum %d should be %d",
ip->i_number, dap->da_newinum);
/*
* If we are deleting a changed name that never made it to disk,
* then return the dirrem describing the previous inode (which
* represents the inode currently referenced from this entry on disk).
*/
if ((dap->da_state & DIRCHG) != 0) {
*prevdirremp = dap->da_previous;
dap->da_state &= ~DIRCHG;
dap->da_pagedep = pagedep;
}
/*
* We are deleting an entry that never made it to disk.
* Mark it COMPLETE so we can delete its inode immediately.
*/
dirrem->dm_state |= COMPLETE;
free_diradd(dap);
return (dirrem);
}
/*
* Directory entry change dependencies.
*
* Changing an existing directory entry requires that an add operation
* be completed first followed by a deletion. The semantics for the addition
* are identical to the description of adding a new entry above except
* that the rollback is to the old inode number rather than zero. Once
* the addition dependency is completed, the removal is done as described
* in the removal routine above.
*/
/*
* This routine should be called immediately after changing
* a directory entry. The inode's link count should not be
* decremented by the calling procedure -- the soft updates
* code will perform this task when it is safe.
*/
void
softdep_setup_directory_change(bp, dp, ip, newinum, isrmdir)
struct buf *bp; /* buffer containing directory block */
struct inode *dp; /* inode for the directory being modified */
struct inode *ip; /* inode for directory entry being removed */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ino_t newinum; /* new inode number for changed entry */
int isrmdir; /* indicates if doing RMDIR */
{
int offset;
struct diradd *dap = NULL;
struct dirrem *dirrem, *prevdirrem;
struct pagedep *pagedep;
struct inodedep *inodedep;
struct mount *mp;
offset = blkoff(dp->i_fs, dp->i_offset);
mp = UFSTOVFS(dp->i_ump);
/*
* Whiteouts do not need diradd dependencies.
*/
if (newinum != WINO) {
MALLOC(dap, struct diradd *, sizeof(struct diradd),
M_DIRADD, M_SOFTDEP_FLAGS|M_ZERO);
workitem_alloc(&dap->da_list, D_DIRADD, mp);
dap->da_state = DIRCHG | ATTACHED | DEPCOMPLETE;
dap->da_offset = offset;
dap->da_newinum = newinum;
}
/*
* Allocate a new dirrem and ACQUIRE_LOCK.
*/
dirrem = newdirrem(bp, dp, ip, isrmdir, &prevdirrem);
pagedep = dirrem->dm_pagedep;
/*
* The possible values for isrmdir:
* 0 - non-directory file rename
* 1 - directory rename within same directory
* inum - directory rename to new directory of given inode number
* When renaming to a new directory, we are both deleting and
* creating a new directory entry, so the link count on the new
* directory should not change. Thus we do not need the followup
* dirrem which is usually done in handle_workitem_remove. We set
* the DIRCHG flag to tell handle_workitem_remove to skip the
* followup dirrem.
*/
if (isrmdir > 1)
dirrem->dm_state |= DIRCHG;
/*
* Whiteouts have no additional dependencies,
* so just put the dirrem on the correct list.
*/
if (newinum == WINO) {
if ((dirrem->dm_state & COMPLETE) == 0) {
LIST_INSERT_HEAD(&pagedep->pd_dirremhd, dirrem,
dm_next);
} else {
dirrem->dm_dirinum = pagedep->pd_ino;
add_to_worklist(&dirrem->dm_list);
}
FREE_LOCK(&lk);
return;
}
/*
* If the COMPLETE flag is clear, then there were no active
* entries and we want to roll back to the previous inode until
* the new inode is committed to disk. If the COMPLETE flag is
* set, then we have deleted an entry that never made it to disk.
* If the entry we deleted resulted from a name change, then the old
* inode reference still resides on disk. Any rollback that we do
* needs to be to that old inode (returned to us in prevdirrem). If
* the entry we deleted resulted from a create, then there is
* no entry on the disk, so we want to roll back to zero rather
* than the uncommitted inode. In either of the COMPLETE cases we
* want to immediately free the unwritten and unreferenced inode.
*/
if ((dirrem->dm_state & COMPLETE) == 0) {
dap->da_previous = dirrem;
} else {
if (prevdirrem != NULL) {
dap->da_previous = prevdirrem;
} else {
dap->da_state &= ~DIRCHG;
dap->da_pagedep = pagedep;
}
dirrem->dm_dirinum = pagedep->pd_ino;
add_to_worklist(&dirrem->dm_list);
}
/*
* Link into its inodedep. Put it on the id_bufwait list if the inode
* is not yet written. If it is written, do the post-inode write
* processing to put it on the id_pendinghd list.
*/
if (inodedep_lookup(mp, newinum, DEPALLOC, &inodedep) == 0 ||
(inodedep->id_state & ALLCOMPLETE) == ALLCOMPLETE) {
dap->da_state |= COMPLETE;
LIST_INSERT_HEAD(&pagedep->pd_pendinghd, dap, da_pdlist);
WORKLIST_INSERT(&inodedep->id_pendinghd, &dap->da_list);
} else {
LIST_INSERT_HEAD(&pagedep->pd_diraddhd[DIRADDHASH(offset)],
dap, da_pdlist);
WORKLIST_INSERT(&inodedep->id_bufwait, &dap->da_list);
}
FREE_LOCK(&lk);
}
/*
* Called whenever the link count on an inode is changed.
* It creates an inode dependency so that the new reference(s)
* to the inode cannot be committed to disk until the updated
* inode has been written.
*/
void
softdep_change_linkcnt(ip)
struct inode *ip; /* the inode with the increased link count */
{
struct inodedep *inodedep;
ACQUIRE_LOCK(&lk);
(void) inodedep_lookup(UFSTOVFS(ip->i_ump), ip->i_number,
DEPALLOC, &inodedep);
if (ip->i_nlink < ip->i_effnlink)
panic("softdep_change_linkcnt: bad delta");
inodedep->id_nlinkdelta = ip->i_nlink - ip->i_effnlink;
FREE_LOCK(&lk);
}
/*
* Called when the effective link count and the reference count
* on an inode drops to zero. At this point there are no names
* referencing the file in the filesystem and no active file
* references. The space associated with the file will be freed
* as soon as the necessary soft dependencies are cleared.
*/
void
softdep_releasefile(ip)
struct inode *ip; /* inode with the zero effective link count */
{
struct inodedep *inodedep;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
struct fs *fs;
int extblocks;
if (ip->i_effnlink > 0)
panic("softdep_releasefile: file still referenced");
/*
* We may be called several times as the on-disk link count
* drops to zero. We only want to account for the space once.
*/
if (ip->i_flag & IN_SPACECOUNTED)
return;
/*
* We have to deactivate a snapshot otherwise copyonwrites may
* add blocks and the cleanup may remove blocks after we have
* tried to account for them.
*/
if ((ip->i_flags & SF_SNAPSHOT) != 0)
ffs_snapremove(ITOV(ip));
/*
* If we are tracking an nlinkdelta, we have to also remember
* whether we accounted for the freed space yet.
*/
ACQUIRE_LOCK(&lk);
if ((inodedep_lookup(UFSTOVFS(ip->i_ump), ip->i_number, 0, &inodedep)))
inodedep->id_state |= SPACECOUNTED;
FREE_LOCK(&lk);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
fs = ip->i_fs;
extblocks = 0;
if (fs->fs_magic == FS_UFS2_MAGIC)
extblocks = btodb(fragroundup(fs, ip->i_din2->di_extsize));
UFS_LOCK(ip->i_ump);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
ip->i_fs->fs_pendingblocks += DIP(ip, i_blocks) - extblocks;
ip->i_fs->fs_pendinginodes += 1;
UFS_UNLOCK(ip->i_ump);
ip->i_flag |= IN_SPACECOUNTED;
}
/*
* This workitem decrements the inode's link count.
* If the link count reaches zero, the file is removed.
*/
static void
handle_workitem_remove(dirrem, xp)
struct dirrem *dirrem;
struct vnode *xp;
{
struct thread *td = curthread;
struct inodedep *inodedep;
struct vnode *vp;
struct inode *ip;
ino_t oldinum;
int error;
if ((vp = xp) == NULL &&
(error = ffs_vget(dirrem->dm_list.wk_mp,
dirrem->dm_oldinum, LK_EXCLUSIVE, &vp)) != 0) {
softdep_error("handle_workitem_remove: vget", error);
return;
}
ip = VTOI(vp);
ACQUIRE_LOCK(&lk);
if ((inodedep_lookup(dirrem->dm_list.wk_mp,
dirrem->dm_oldinum, 0, &inodedep)) == 0)
panic("handle_workitem_remove: lost inodedep");
/*
* Normal file deletion.
*/
if ((dirrem->dm_state & RMDIR) == 0) {
ip->i_nlink--;
DIP_SET(ip, i_nlink, ip->i_nlink);
ip->i_flag |= IN_CHANGE;
if (ip->i_nlink < ip->i_effnlink)
panic("handle_workitem_remove: bad file delta");
inodedep->id_nlinkdelta = ip->i_nlink - ip->i_effnlink;
num_dirrem -= 1;
WORKITEM_FREE(dirrem, D_DIRREM);
FREE_LOCK(&lk);
vput(vp);
return;
}
/*
* Directory deletion. Decrement reference count for both the
* just deleted parent directory entry and the reference for ".".
* Next truncate the directory to length zero. When the
* truncation completes, arrange to have the reference count on
* the parent decremented to account for the loss of "..".
*/
ip->i_nlink -= 2;
DIP_SET(ip, i_nlink, ip->i_nlink);
ip->i_flag |= IN_CHANGE;
if (ip->i_nlink < ip->i_effnlink)
panic("handle_workitem_remove: bad dir delta");
inodedep->id_nlinkdelta = ip->i_nlink - ip->i_effnlink;
FREE_LOCK(&lk);
if ((error = ffs_truncate(vp, (off_t)0, 0, td->td_ucred, td)) != 0)
softdep_error("handle_workitem_remove: truncate", error);
ACQUIRE_LOCK(&lk);
/*
* Rename a directory to a new parent. Since, we are both deleting
* and creating a new directory entry, the link count on the new
* directory should not change. Thus we skip the followup dirrem.
*/
if (dirrem->dm_state & DIRCHG) {
num_dirrem -= 1;
WORKITEM_FREE(dirrem, D_DIRREM);
FREE_LOCK(&lk);
vput(vp);
return;
}
/*
* If the inodedep does not exist, then the zero'ed inode has
* been written to disk. If the allocated inode has never been
* written to disk, then the on-disk inode is zero'ed. In either
* case we can remove the file immediately.
*/
dirrem->dm_state = 0;
oldinum = dirrem->dm_oldinum;
dirrem->dm_oldinum = dirrem->dm_dirinum;
if (inodedep_lookup(dirrem->dm_list.wk_mp, oldinum,
0, &inodedep) == 0 || check_inode_unwritten(inodedep)) {
if (xp != NULL)
add_to_worklist(&dirrem->dm_list);
FREE_LOCK(&lk);
vput(vp);
if (xp == NULL)
handle_workitem_remove(dirrem, NULL);
return;
}
WORKLIST_INSERT(&inodedep->id_inowait, &dirrem->dm_list);
FREE_LOCK(&lk);
After a rmdir()ed directory has been truncated, force an update of the directory's inode after queuing the dirrem that will decrement the parent directory's link count. This will force the update of the parent directory's actual link to actually be scheduled. Without this change the parent directory's actual link count would not be updated until ufs_inactive() cleared the inode of the newly removed directory, which might be deferred indefinitely. ufs_inactive() will not be called as long as any process holds a reference to the removed directory, and ufs_inactive() will not clear the inode if the link count is non-zero, which could be the result of an earlier system crash. If a background fsck is run before the update of the parent directory's actual link count has been performed, or at least scheduled by putting the dirrem on the leaf directory's inodedep id_bufwait list, fsck will corrupt the file system by decrementing the parent directory's effective link count, which was previously correct because it already took the removal of the leaf directory into account, and setting the actual link count to the same value as the effective link count after the dangling, removed, leaf directory has been removed. This happens because fsck acts based on the actual link count, which will be too high when fsck creates the file system snapshot that it references. This change has the fortunate side effect of more quickly cleaning up the large number dirrem structures that linger for an extended time after the removal of a large directory tree. It also fixes a potential problem with the shutdown of the syncer thread timing out if the system is rebooted immediately after removing a large directory tree. Submitted by: tegge MFC after: 3 days
2005-09-29 21:50:26 +00:00
ip->i_flag |= IN_CHANGE;
ffs_update(vp, 0);
vput(vp);
}
/*
* Inode de-allocation dependencies.
*
* When an inode's link count is reduced to zero, it can be de-allocated. We
* found it convenient to postpone de-allocation until after the inode is
* written to disk with its new link count (zero). At this point, all of the
* on-disk inode's block pointers are nullified and, with careful dependency
* list ordering, all dependencies related to the inode will be satisfied and
* the corresponding dependency structures de-allocated. So, if/when the
* inode is reused, there will be no mixing of old dependencies with new
* ones. This artificial dependency is set up by the block de-allocation
* procedure above (softdep_setup_freeblocks) and completed by the
* following procedure.
*/
static void
handle_workitem_freefile(freefile)
struct freefile *freefile;
{
struct fs *fs;
struct inodedep *idp;
struct ufsmount *ump;
int error;
ump = VFSTOUFS(freefile->fx_list.wk_mp);
fs = ump->um_fs;
#ifdef DEBUG
ACQUIRE_LOCK(&lk);
error = inodedep_lookup(UFSTOVFS(ump), freefile->fx_oldinum, 0, &idp);
FREE_LOCK(&lk);
if (error)
panic("handle_workitem_freefile: inodedep survived");
#endif
UFS_LOCK(ump);
fs->fs_pendinginodes -= 1;
UFS_UNLOCK(ump);
if ((error = ffs_freefile(ump, fs, freefile->fx_devvp,
freefile->fx_oldinum, freefile->fx_mode)) != 0)
softdep_error("handle_workitem_freefile", error);
ACQUIRE_LOCK(&lk);
WORKITEM_FREE(freefile, D_FREEFILE);
FREE_LOCK(&lk);
}
/*
* Helper function which unlinks marker element from work list and returns
* the next element on the list.
*/
static __inline struct worklist *
markernext(struct worklist *marker)
{
struct worklist *next;
next = LIST_NEXT(marker, wk_list);
LIST_REMOVE(marker, wk_list);
return next;
}
/*
* Disk writes.
*
* The dependency structures constructed above are most actively used when file
* system blocks are written to disk. No constraints are placed on when a
* block can be written, but unsatisfied update dependencies are made safe by
* modifying (or replacing) the source memory for the duration of the disk
* write. When the disk write completes, the memory block is again brought
* up-to-date.
*
* In-core inode structure reclamation.
*
* Because there are a finite number of "in-core" inode structures, they are
* reused regularly. By transferring all inode-related dependencies to the
* in-memory inode block and indexing them separately (via "inodedep"s), we
* can allow "in-core" inode structures to be reused at any time and avoid
* any increase in contention.
*
* Called just before entering the device driver to initiate a new disk I/O.
* The buffer must be locked, thus, no I/O completion operations can occur
* while we are manipulating its associated dependencies.
*/
static void
softdep_disk_io_initiation(bp)
struct buf *bp; /* structure describing disk write to occur */
{
struct worklist *wk;
struct worklist marker;
struct indirdep *indirdep;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct inodedep *inodedep;
/*
* We only care about write operations. There should never
* be dependencies for reads.
*/
2005-02-09 12:22:16 +00:00
if (bp->b_iocmd != BIO_WRITE)
panic("softdep_disk_io_initiation: not write");
marker.wk_type = D_LAST + 1; /* Not a normal workitem */
PHOLD(curproc); /* Don't swap out kernel stack */
ACQUIRE_LOCK(&lk);
/*
* Do any necessary pre-I/O processing.
*/
for (wk = LIST_FIRST(&bp->b_dep); wk != NULL;
wk = markernext(&marker)) {
LIST_INSERT_AFTER(wk, &marker, wk_list);
switch (wk->wk_type) {
case D_PAGEDEP:
initiate_write_filepage(WK_PAGEDEP(wk), bp);
continue;
case D_INODEDEP:
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
inodedep = WK_INODEDEP(wk);
if (inodedep->id_fs->fs_magic == FS_UFS1_MAGIC)
initiate_write_inodeblock_ufs1(inodedep, bp);
else
initiate_write_inodeblock_ufs2(inodedep, bp);
continue;
case D_INDIRDEP:
indirdep = WK_INDIRDEP(wk);
if (indirdep->ir_state & GOINGAWAY)
panic("disk_io_initiation: indirdep gone");
/*
* If there are no remaining dependencies, this
* will be writing the real pointers, so the
* dependency can be freed.
*/
2007-04-04 07:29:53 +00:00
if (LIST_EMPTY(&indirdep->ir_deplisthd)) {
struct buf *bp;
bp = indirdep->ir_savebp;
bp->b_flags |= B_INVAL | B_NOCACHE;
/* inline expand WORKLIST_REMOVE(wk); */
wk->wk_state &= ~ONWORKLIST;
LIST_REMOVE(wk, wk_list);
WORKITEM_FREE(indirdep, D_INDIRDEP);
FREE_LOCK(&lk);
brelse(bp);
ACQUIRE_LOCK(&lk);
continue;
}
/*
* Replace up-to-date version with safe version.
*/
FREE_LOCK(&lk);
MALLOC(indirdep->ir_saveddata, caddr_t, bp->b_bcount,
Implement a low-memory deadlock solution. Removed most of the hacks that were trying to deal with low-memory situations prior to now. The new code is based on the concept that I/O must be able to function in a low memory situation. All major modules related to I/O (except networking) have been adjusted to allow allocation out of the system reserve memory pool. These modules now detect a low memory situation but rather then block they instead continue to operate, then return resources to the memory pool instead of cache them or leave them wired. Code has been added to stall in a low-memory situation prior to a vnode being locked. Thus situations where a process blocks in a low-memory condition while holding a locked vnode have been reduced to near nothing. Not only will I/O continue to operate, but many prior deadlock conditions simply no longer exist. Implement a number of VFS/BIO fixes (found by Ian): in biodone(), bogus-page replacement code, the loop was not properly incrementing loop variables prior to a continue statement. We do not believe this code can be hit anyway but we aren't taking any chances. We'll turn the whole section into a panic (as it already is in brelse()) after the release is rolled. In biodone(), the foff calculation was incorrectly clamped to the iosize, causing the wrong foff to be calculated for pages in the case of an I/O error or biodone() called without initiating I/O. The problem always caused a panic before. Now it doesn't. The problem is mainly an issue with NFS. Fixed casts for ~PAGE_MASK. This code worked properly before only because the calculations use signed arithmatic. Better to properly extend PAGE_MASK first before inverting it for the 64 bit masking op. In brelse(), the bogus_page fixup code was improperly throwing away the original contents of 'm' when it did the j-loop to fix the bogus pages. The result was that it would potentially invalidate parts of the *WRONG* page(!), leading to corruption. There may still be cases where a background bitmap write is being duplicated, causing potential corruption. We have identified a potentially serious bug related to this but the fix is still TBD. So instead this patch contains a KASSERT to detect the problem and panic the machine rather then continue to corrupt the filesystem. The problem does not occur very often.. it is very hard to reproduce, and it may or may not be the cause of the corruption people have reported. Review by: (VFS/BIO: mckusick, Ian Dowse <iedowse@maths.tcd.ie>) Testing by: (VM/Deadlock) Paul Saab <ps@yahoo-inc.com>
2000-11-18 23:06:26 +00:00
M_INDIRDEP, M_SOFTDEP_FLAGS);
ACQUIRE_LOCK(&lk);
indirdep->ir_state &= ~ATTACHED;
indirdep->ir_state |= UNDONE;
bcopy(bp->b_data, indirdep->ir_saveddata, bp->b_bcount);
bcopy(indirdep->ir_savebp->b_data, bp->b_data,
bp->b_bcount);
continue;
case D_MKDIR:
case D_BMSAFEMAP:
case D_ALLOCDIRECT:
case D_ALLOCINDIR:
continue;
default:
panic("handle_disk_io_initiation: Unexpected type %s",
TYPENAME(wk->wk_type));
/* NOTREACHED */
}
}
FREE_LOCK(&lk);
PRELE(curproc); /* Allow swapout of kernel stack */
}
/*
* Called from within the procedure above to deal with unsatisfied
* allocation dependencies in a directory. The buffer must be locked,
* thus, no I/O completion operations can occur while we are
* manipulating its associated dependencies.
*/
static void
initiate_write_filepage(pagedep, bp)
struct pagedep *pagedep;
struct buf *bp;
{
struct diradd *dap;
struct direct *ep;
int i;
if (pagedep->pd_state & IOSTARTED) {
/*
* This can only happen if there is a driver that does not
* understand chaining. Here biodone will reissue the call
* to strategy for the incomplete buffers.
*/
printf("initiate_write_filepage: already started\n");
return;
}
pagedep->pd_state |= IOSTARTED;
for (i = 0; i < DAHASHSZ; i++) {
LIST_FOREACH(dap, &pagedep->pd_diraddhd[i], da_pdlist) {
ep = (struct direct *)
((char *)bp->b_data + dap->da_offset);
if (ep->d_ino != dap->da_newinum)
panic("%s: dir inum %d != new %d",
"initiate_write_filepage",
ep->d_ino, dap->da_newinum);
if (dap->da_state & DIRCHG)
ep->d_ino = dap->da_previous->dm_oldinum;
else
ep->d_ino = 0;
dap->da_state &= ~ATTACHED;
dap->da_state |= UNDONE;
}
}
}
/*
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
* Version of initiate_write_inodeblock that handles UFS1 dinodes.
* Note that any bug fixes made to this routine must be done in the
* version found below.
*
* Called from within the procedure above to deal with unsatisfied
* allocation dependencies in an inodeblock. The buffer must be
* locked, thus, no I/O completion operations can occur while we
* are manipulating its associated dependencies.
*/
static void
initiate_write_inodeblock_ufs1(inodedep, bp)
struct inodedep *inodedep;
struct buf *bp; /* The inode block */
{
struct allocdirect *adp, *lastadp;
struct ufs1_dinode *dp;
struct ufs1_dinode *sip;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct fs *fs;
ufs_lbn_t i;
#ifdef INVARIANTS
ufs_lbn_t prevlbn = 0;
#endif
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int deplist;
if (inodedep->id_state & IOSTARTED)
panic("initiate_write_inodeblock_ufs1: already started");
inodedep->id_state |= IOSTARTED;
fs = inodedep->id_fs;
dp = (struct ufs1_dinode *)bp->b_data +
ino_to_fsbo(fs, inodedep->id_ino);
/*
* If the bitmap is not yet written, then the allocated
* inode cannot be written to disk.
*/
if ((inodedep->id_state & DEPCOMPLETE) == 0) {
if (inodedep->id_savedino1 != NULL)
panic("initiate_write_inodeblock_ufs1: I/O underway");
FREE_LOCK(&lk);
MALLOC(sip, struct ufs1_dinode *,
sizeof(struct ufs1_dinode), M_SAVEDINO, M_SOFTDEP_FLAGS);
ACQUIRE_LOCK(&lk);
inodedep->id_savedino1 = sip;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
*inodedep->id_savedino1 = *dp;
bzero((caddr_t)dp, sizeof(struct ufs1_dinode));
dp->di_gen = inodedep->id_savedino1->di_gen;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
return;
}
/*
* If no dependencies, then there is nothing to roll back.
*/
inodedep->id_savedsize = dp->di_size;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
inodedep->id_savedextsize = 0;
2007-04-04 07:29:53 +00:00
if (TAILQ_EMPTY(&inodedep->id_inoupdt))
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
return;
/*
* Set the dependencies to busy.
*/
for (deplist = 0, adp = TAILQ_FIRST(&inodedep->id_inoupdt); adp;
adp = TAILQ_NEXT(adp, ad_next)) {
#ifdef INVARIANTS
if (deplist != 0 && prevlbn >= adp->ad_lbn)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
panic("softdep_write_inodeblock: lbn order");
prevlbn = adp->ad_lbn;
if (adp->ad_lbn < NDADDR &&
dp->di_db[adp->ad_lbn] != adp->ad_newblkno)
panic("%s: direct pointer #%jd mismatch %d != %jd",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
"softdep_write_inodeblock",
(intmax_t)adp->ad_lbn,
dp->di_db[adp->ad_lbn],
(intmax_t)adp->ad_newblkno);
if (adp->ad_lbn >= NDADDR &&
dp->di_ib[adp->ad_lbn - NDADDR] != adp->ad_newblkno)
panic("%s: indirect pointer #%jd mismatch %d != %jd",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
"softdep_write_inodeblock",
(intmax_t)adp->ad_lbn - NDADDR,
dp->di_ib[adp->ad_lbn - NDADDR],
(intmax_t)adp->ad_newblkno);
deplist |= 1 << adp->ad_lbn;
if ((adp->ad_state & ATTACHED) == 0)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
panic("softdep_write_inodeblock: Unknown state 0x%x",
adp->ad_state);
#endif /* INVARIANTS */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
adp->ad_state &= ~ATTACHED;
adp->ad_state |= UNDONE;
}
/*
* The on-disk inode cannot claim to be any larger than the last
* fragment that has been written. Otherwise, the on-disk inode
* might have fragments that were not the last block in the file
* which would corrupt the filesystem.
*/
for (lastadp = NULL, adp = TAILQ_FIRST(&inodedep->id_inoupdt); adp;
lastadp = adp, adp = TAILQ_NEXT(adp, ad_next)) {
if (adp->ad_lbn >= NDADDR)
break;
dp->di_db[adp->ad_lbn] = adp->ad_oldblkno;
/* keep going until hitting a rollback to a frag */
if (adp->ad_oldsize == 0 || adp->ad_oldsize == fs->fs_bsize)
continue;
dp->di_size = fs->fs_bsize * adp->ad_lbn + adp->ad_oldsize;
for (i = adp->ad_lbn + 1; i < NDADDR; i++) {
#ifdef INVARIANTS
if (dp->di_db[i] != 0 && (deplist & (1 << i)) == 0)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
panic("softdep_write_inodeblock: lost dep1");
#endif /* INVARIANTS */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
dp->di_db[i] = 0;
}
for (i = 0; i < NIADDR; i++) {
#ifdef INVARIANTS
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (dp->di_ib[i] != 0 &&
(deplist & ((1 << NDADDR) << i)) == 0)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
panic("softdep_write_inodeblock: lost dep2");
#endif /* INVARIANTS */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
dp->di_ib[i] = 0;
}
return;
}
/*
* If we have zero'ed out the last allocated block of the file,
* roll back the size to the last currently allocated block.
* We know that this last allocated block is a full-sized as
* we already checked for fragments in the loop above.
*/
if (lastadp != NULL &&
dp->di_size <= (lastadp->ad_lbn + 1) * fs->fs_bsize) {
for (i = lastadp->ad_lbn; i >= 0; i--)
if (dp->di_db[i] != 0)
break;
dp->di_size = (i + 1) * fs->fs_bsize;
}
/*
* The only dependencies are for indirect blocks.
*
* The file size for indirect block additions is not guaranteed.
* Such a guarantee would be non-trivial to achieve. The conventional
* synchronous write implementation also does not make this guarantee.
* Fsck should catch and fix discrepancies. Arguably, the file size
* can be over-estimated without destroying integrity when the file
* moves into the indirect blocks (i.e., is large). If we want to
* postpone fsck, we are stuck with this argument.
*/
for (; adp; adp = TAILQ_NEXT(adp, ad_next))
dp->di_ib[adp->ad_lbn - NDADDR] = 0;
}
/*
* Version of initiate_write_inodeblock that handles UFS2 dinodes.
* Note that any bug fixes made to this routine must be done in the
* version found above.
*
* Called from within the procedure above to deal with unsatisfied
* allocation dependencies in an inodeblock. The buffer must be
* locked, thus, no I/O completion operations can occur while we
* are manipulating its associated dependencies.
*/
static void
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
initiate_write_inodeblock_ufs2(inodedep, bp)
struct inodedep *inodedep;
struct buf *bp; /* The inode block */
{
struct allocdirect *adp, *lastadp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct ufs2_dinode *dp;
struct ufs2_dinode *sip;
struct fs *fs;
ufs_lbn_t i;
#ifdef INVARIANTS
ufs_lbn_t prevlbn = 0;
#endif
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int deplist;
if (inodedep->id_state & IOSTARTED)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
panic("initiate_write_inodeblock_ufs2: already started");
inodedep->id_state |= IOSTARTED;
fs = inodedep->id_fs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
dp = (struct ufs2_dinode *)bp->b_data +
ino_to_fsbo(fs, inodedep->id_ino);
/*
* If the bitmap is not yet written, then the allocated
* inode cannot be written to disk.
*/
if ((inodedep->id_state & DEPCOMPLETE) == 0) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (inodedep->id_savedino2 != NULL)
panic("initiate_write_inodeblock_ufs2: I/O underway");
FREE_LOCK(&lk);
MALLOC(sip, struct ufs2_dinode *,
sizeof(struct ufs2_dinode), M_SAVEDINO, M_SOFTDEP_FLAGS);
ACQUIRE_LOCK(&lk);
inodedep->id_savedino2 = sip;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
*inodedep->id_savedino2 = *dp;
bzero((caddr_t)dp, sizeof(struct ufs2_dinode));
dp->di_gen = inodedep->id_savedino2->di_gen;
return;
}
/*
* If no dependencies, then there is nothing to roll back.
*/
inodedep->id_savedsize = dp->di_size;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
inodedep->id_savedextsize = dp->di_extsize;
2007-04-04 07:29:53 +00:00
if (TAILQ_EMPTY(&inodedep->id_inoupdt) &&
TAILQ_EMPTY(&inodedep->id_extupdt))
return;
/*
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
* Set the ext data dependencies to busy.
*/
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
for (deplist = 0, adp = TAILQ_FIRST(&inodedep->id_extupdt); adp;
adp = TAILQ_NEXT(adp, ad_next)) {
#ifdef INVARIANTS
if (deplist != 0 && prevlbn >= adp->ad_lbn)
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
panic("softdep_write_inodeblock: lbn order");
prevlbn = adp->ad_lbn;
if (dp->di_extb[adp->ad_lbn] != adp->ad_newblkno)
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
panic("%s: direct pointer #%jd mismatch %jd != %jd",
"softdep_write_inodeblock",
(intmax_t)adp->ad_lbn,
(intmax_t)dp->di_extb[adp->ad_lbn],
(intmax_t)adp->ad_newblkno);
deplist |= 1 << adp->ad_lbn;
if ((adp->ad_state & ATTACHED) == 0)
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
panic("softdep_write_inodeblock: Unknown state 0x%x",
adp->ad_state);
#endif /* INVARIANTS */
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
adp->ad_state &= ~ATTACHED;
adp->ad_state |= UNDONE;
}
/*
* The on-disk inode cannot claim to be any larger than the last
* fragment that has been written. Otherwise, the on-disk inode
* might have fragments that were not the last block in the ext
* data which would corrupt the filesystem.
*/
for (lastadp = NULL, adp = TAILQ_FIRST(&inodedep->id_extupdt); adp;
lastadp = adp, adp = TAILQ_NEXT(adp, ad_next)) {
dp->di_extb[adp->ad_lbn] = adp->ad_oldblkno;
/* keep going until hitting a rollback to a frag */
if (adp->ad_oldsize == 0 || adp->ad_oldsize == fs->fs_bsize)
continue;
dp->di_extsize = fs->fs_bsize * adp->ad_lbn + adp->ad_oldsize;
for (i = adp->ad_lbn + 1; i < NXADDR; i++) {
#ifdef INVARIANTS
if (dp->di_extb[i] != 0 && (deplist & (1 << i)) == 0)
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
panic("softdep_write_inodeblock: lost dep1");
#endif /* INVARIANTS */
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
dp->di_extb[i] = 0;
}
lastadp = NULL;
break;
}
/*
* If we have zero'ed out the last allocated block of the ext
* data, roll back the size to the last currently allocated block.
* We know that this last allocated block is a full-sized as
* we already checked for fragments in the loop above.
*/
if (lastadp != NULL &&
dp->di_extsize <= (lastadp->ad_lbn + 1) * fs->fs_bsize) {
for (i = lastadp->ad_lbn; i >= 0; i--)
if (dp->di_extb[i] != 0)
break;
dp->di_extsize = (i + 1) * fs->fs_bsize;
}
/*
* Set the file data dependencies to busy.
*/
for (deplist = 0, adp = TAILQ_FIRST(&inodedep->id_inoupdt); adp;
adp = TAILQ_NEXT(adp, ad_next)) {
#ifdef INVARIANTS
if (deplist != 0 && prevlbn >= adp->ad_lbn)
panic("softdep_write_inodeblock: lbn order");
prevlbn = adp->ad_lbn;
if (adp->ad_lbn < NDADDR &&
dp->di_db[adp->ad_lbn] != adp->ad_newblkno)
panic("%s: direct pointer #%jd mismatch %jd != %jd",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
"softdep_write_inodeblock",
(intmax_t)adp->ad_lbn,
(intmax_t)dp->di_db[adp->ad_lbn],
(intmax_t)adp->ad_newblkno);
if (adp->ad_lbn >= NDADDR &&
dp->di_ib[adp->ad_lbn - NDADDR] != adp->ad_newblkno)
panic("%s indirect pointer #%jd mismatch %jd != %jd",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
"softdep_write_inodeblock:",
(intmax_t)adp->ad_lbn - NDADDR,
(intmax_t)dp->di_ib[adp->ad_lbn - NDADDR],
(intmax_t)adp->ad_newblkno);
deplist |= 1 << adp->ad_lbn;
if ((adp->ad_state & ATTACHED) == 0)
panic("softdep_write_inodeblock: Unknown state 0x%x",
adp->ad_state);
#endif /* INVARIANTS */
adp->ad_state &= ~ATTACHED;
adp->ad_state |= UNDONE;
}
/*
* The on-disk inode cannot claim to be any larger than the last
* fragment that has been written. Otherwise, the on-disk inode
* might have fragments that were not the last block in the file
* which would corrupt the filesystem.
*/
for (lastadp = NULL, adp = TAILQ_FIRST(&inodedep->id_inoupdt); adp;
lastadp = adp, adp = TAILQ_NEXT(adp, ad_next)) {
if (adp->ad_lbn >= NDADDR)
break;
dp->di_db[adp->ad_lbn] = adp->ad_oldblkno;
/* keep going until hitting a rollback to a frag */
if (adp->ad_oldsize == 0 || adp->ad_oldsize == fs->fs_bsize)
continue;
dp->di_size = fs->fs_bsize * adp->ad_lbn + adp->ad_oldsize;
for (i = adp->ad_lbn + 1; i < NDADDR; i++) {
#ifdef INVARIANTS
if (dp->di_db[i] != 0 && (deplist & (1 << i)) == 0)
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
panic("softdep_write_inodeblock: lost dep2");
#endif /* INVARIANTS */
dp->di_db[i] = 0;
}
for (i = 0; i < NIADDR; i++) {
#ifdef INVARIANTS
if (dp->di_ib[i] != 0 &&
(deplist & ((1 << NDADDR) << i)) == 0)
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
panic("softdep_write_inodeblock: lost dep3");
#endif /* INVARIANTS */
dp->di_ib[i] = 0;
}
return;
}
/*
* If we have zero'ed out the last allocated block of the file,
* roll back the size to the last currently allocated block.
* We know that this last allocated block is a full-sized as
* we already checked for fragments in the loop above.
*/
if (lastadp != NULL &&
dp->di_size <= (lastadp->ad_lbn + 1) * fs->fs_bsize) {
for (i = lastadp->ad_lbn; i >= 0; i--)
if (dp->di_db[i] != 0)
break;
dp->di_size = (i + 1) * fs->fs_bsize;
}
/*
* The only dependencies are for indirect blocks.
*
* The file size for indirect block additions is not guaranteed.
* Such a guarantee would be non-trivial to achieve. The conventional
* synchronous write implementation also does not make this guarantee.
* Fsck should catch and fix discrepancies. Arguably, the file size
* can be over-estimated without destroying integrity when the file
* moves into the indirect blocks (i.e., is large). If we want to
* postpone fsck, we are stuck with this argument.
*/
for (; adp; adp = TAILQ_NEXT(adp, ad_next))
dp->di_ib[adp->ad_lbn - NDADDR] = 0;
}
/*
* This routine is called during the completion interrupt
* service routine for a disk write (from the procedure called
2002-05-16 21:28:32 +00:00
* by the device driver to inform the filesystem caches of
* a request completion). It should be called early in this
* procedure, before the block is made available to other
* processes or other routines are called.
*/
static void
softdep_disk_write_complete(bp)
struct buf *bp; /* describes the completed disk write */
{
struct worklist *wk;
struct worklist *owk;
struct workhead reattach;
struct newblk *newblk;
struct allocindir *aip;
struct allocdirect *adp;
struct indirdep *indirdep;
struct inodedep *inodedep;
struct bmsafemap *bmsafemap;
/*
* If an error occurred while doing the write, then the data
* has not hit the disk and the dependencies cannot be unrolled.
*/
if ((bp->b_ioflags & BIO_ERROR) != 0 && (bp->b_flags & B_INVAL) == 0)
return;
LIST_INIT(&reattach);
/*
* This lock must not be released anywhere in this code segment.
*/
ACQUIRE_LOCK(&lk);
owk = NULL;
while ((wk = LIST_FIRST(&bp->b_dep)) != NULL) {
WORKLIST_REMOVE(wk);
if (wk == owk)
panic("duplicate worklist: %p\n", wk);
owk = wk;
switch (wk->wk_type) {
case D_PAGEDEP:
if (handle_written_filepage(WK_PAGEDEP(wk), bp))
WORKLIST_INSERT(&reattach, wk);
continue;
case D_INODEDEP:
if (handle_written_inodeblock(WK_INODEDEP(wk), bp))
WORKLIST_INSERT(&reattach, wk);
continue;
case D_BMSAFEMAP:
bmsafemap = WK_BMSAFEMAP(wk);
while ((newblk = LIST_FIRST(&bmsafemap->sm_newblkhd))) {
newblk->nb_state |= DEPCOMPLETE;
newblk->nb_bmsafemap = NULL;
LIST_REMOVE(newblk, nb_deps);
}
while ((adp =
LIST_FIRST(&bmsafemap->sm_allocdirecthd))) {
adp->ad_state |= DEPCOMPLETE;
adp->ad_buf = NULL;
LIST_REMOVE(adp, ad_deps);
handle_allocdirect_partdone(adp);
}
while ((aip =
LIST_FIRST(&bmsafemap->sm_allocindirhd))) {
aip->ai_state |= DEPCOMPLETE;
aip->ai_buf = NULL;
LIST_REMOVE(aip, ai_deps);
handle_allocindir_partdone(aip);
}
while ((inodedep =
LIST_FIRST(&bmsafemap->sm_inodedephd)) != NULL) {
inodedep->id_state |= DEPCOMPLETE;
LIST_REMOVE(inodedep, id_deps);
inodedep->id_buf = NULL;
}
WORKITEM_FREE(bmsafemap, D_BMSAFEMAP);
continue;
case D_MKDIR:
handle_written_mkdir(WK_MKDIR(wk), MKDIR_BODY);
continue;
case D_ALLOCDIRECT:
adp = WK_ALLOCDIRECT(wk);
adp->ad_state |= COMPLETE;
handle_allocdirect_partdone(adp);
continue;
case D_ALLOCINDIR:
aip = WK_ALLOCINDIR(wk);
aip->ai_state |= COMPLETE;
handle_allocindir_partdone(aip);
continue;
case D_INDIRDEP:
indirdep = WK_INDIRDEP(wk);
if (indirdep->ir_state & GOINGAWAY)
panic("disk_write_complete: indirdep gone");
bcopy(indirdep->ir_saveddata, bp->b_data, bp->b_bcount);
FREE(indirdep->ir_saveddata, M_INDIRDEP);
indirdep->ir_saveddata = 0;
indirdep->ir_state &= ~UNDONE;
indirdep->ir_state |= ATTACHED;
while ((aip = LIST_FIRST(&indirdep->ir_donehd)) != 0) {
handle_allocindir_partdone(aip);
if (aip == LIST_FIRST(&indirdep->ir_donehd))
panic("disk_write_complete: not gone");
}
WORKLIST_INSERT(&reattach, wk);
if ((bp->b_flags & B_DELWRI) == 0)
stat_indir_blk_ptrs++;
bdirty(bp);
continue;
default:
panic("handle_disk_write_complete: Unknown type %s",
TYPENAME(wk->wk_type));
/* NOTREACHED */
}
}
/*
* Reattach any requests that must be redone.
*/
while ((wk = LIST_FIRST(&reattach)) != NULL) {
WORKLIST_REMOVE(wk);
WORKLIST_INSERT(&bp->b_dep, wk);
}
FREE_LOCK(&lk);
}
/*
* Called from within softdep_disk_write_complete above. Note that
* this routine is always called from interrupt level with further
* splbio interrupts blocked.
*/
static void
handle_allocdirect_partdone(adp)
struct allocdirect *adp; /* the completed allocdirect */
{
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
struct allocdirectlst *listhead;
struct allocdirect *listadp;
struct inodedep *inodedep;
long bsize, delay;
if ((adp->ad_state & ALLCOMPLETE) != ALLCOMPLETE)
return;
if (adp->ad_buf != NULL)
panic("handle_allocdirect_partdone: dangling dep");
/*
* The on-disk inode cannot claim to be any larger than the last
* fragment that has been written. Otherwise, the on-disk inode
* might have fragments that were not the last block in the file
* which would corrupt the filesystem. Thus, we cannot free any
* allocdirects after one whose ad_oldblkno claims a fragment as
* these blocks must be rolled back to zero before writing the inode.
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
* We check the currently active set of allocdirects in id_inoupdt
* or id_extupdt as appropriate.
*/
inodedep = adp->ad_inodedep;
bsize = inodedep->id_fs->fs_bsize;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (adp->ad_state & EXTDATA)
listhead = &inodedep->id_extupdt;
else
listhead = &inodedep->id_inoupdt;
TAILQ_FOREACH(listadp, listhead, ad_next) {
/* found our block */
if (listadp == adp)
break;
/* continue if ad_oldlbn is not a fragment */
if (listadp->ad_oldsize == 0 ||
listadp->ad_oldsize == bsize)
continue;
/* hit a fragment */
return;
}
/*
* If we have reached the end of the current list without
* finding the just finished dependency, then it must be
* on the future dependency list. Future dependencies cannot
* be freed until they are moved to the current list.
*/
if (listadp == NULL) {
#ifdef DEBUG
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (adp->ad_state & EXTDATA)
listhead = &inodedep->id_newextupdt;
else
listhead = &inodedep->id_newinoupdt;
TAILQ_FOREACH(listadp, listhead, ad_next)
/* found our block */
if (listadp == adp)
break;
if (listadp == NULL)
panic("handle_allocdirect_partdone: lost dep");
#endif /* DEBUG */
return;
}
/*
* If we have found the just finished dependency, then free
* it along with anything that follows it that is complete.
* If the inode still has a bitmap dependency, then it has
* never been written to disk, hence the on-disk inode cannot
* reference the old fragment so we can free it without delay.
*/
delay = (inodedep->id_state & DEPCOMPLETE);
for (; adp; adp = listadp) {
listadp = TAILQ_NEXT(adp, ad_next);
if ((adp->ad_state & ALLCOMPLETE) != ALLCOMPLETE)
return;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
free_allocdirect(listhead, adp, delay);
}
}
/*
* Called from within softdep_disk_write_complete above. Note that
* this routine is always called from interrupt level with further
* splbio interrupts blocked.
*/
static void
handle_allocindir_partdone(aip)
struct allocindir *aip; /* the completed allocindir */
{
struct indirdep *indirdep;
if ((aip->ai_state & ALLCOMPLETE) != ALLCOMPLETE)
return;
if (aip->ai_buf != NULL)
panic("handle_allocindir_partdone: dangling dependency");
indirdep = aip->ai_indirdep;
if (indirdep->ir_state & UNDONE) {
LIST_REMOVE(aip, ai_next);
LIST_INSERT_HEAD(&indirdep->ir_donehd, aip, ai_next);
return;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (indirdep->ir_state & UFS1FMT)
((ufs1_daddr_t *)indirdep->ir_savebp->b_data)[aip->ai_offset] =
aip->ai_newblkno;
else
((ufs2_daddr_t *)indirdep->ir_savebp->b_data)[aip->ai_offset] =
aip->ai_newblkno;
LIST_REMOVE(aip, ai_next);
if (aip->ai_freefrag != NULL)
add_to_worklist(&aip->ai_freefrag->ff_list);
WORKITEM_FREE(aip, D_ALLOCINDIR);
}
/*
* Called from within softdep_disk_write_complete above to restore
* in-memory inode block contents to their most up-to-date state. Note
* that this routine is always called from interrupt level with further
* splbio interrupts blocked.
*/
static int
handle_written_inodeblock(inodedep, bp)
struct inodedep *inodedep;
struct buf *bp; /* buffer containing the inode block */
{
struct worklist *wk, *filefree;
struct allocdirect *adp, *nextadp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct ufs1_dinode *dp1 = NULL;
struct ufs2_dinode *dp2 = NULL;
int hadchanges, fstype;
if ((inodedep->id_state & IOSTARTED) == 0)
panic("handle_written_inodeblock: not started");
inodedep->id_state &= ~IOSTARTED;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (inodedep->id_fs->fs_magic == FS_UFS1_MAGIC) {
fstype = UFS1;
dp1 = (struct ufs1_dinode *)bp->b_data +
ino_to_fsbo(inodedep->id_fs, inodedep->id_ino);
} else {
fstype = UFS2;
dp2 = (struct ufs2_dinode *)bp->b_data +
ino_to_fsbo(inodedep->id_fs, inodedep->id_ino);
}
/*
* If we had to rollback the inode allocation because of
* bitmaps being incomplete, then simply restore it.
* Keep the block dirty so that it will not be reclaimed until
* all associated dependencies have been cleared and the
* corresponding updates written to disk.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (inodedep->id_savedino1 != NULL) {
if (fstype == UFS1)
*dp1 = *inodedep->id_savedino1;
else
*dp2 = *inodedep->id_savedino2;
FREE(inodedep->id_savedino1, M_SAVEDINO);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
inodedep->id_savedino1 = NULL;
if ((bp->b_flags & B_DELWRI) == 0)
stat_inode_bitmap++;
bdirty(bp);
return (1);
}
inodedep->id_state |= COMPLETE;
/*
* Roll forward anything that had to be rolled back before
* the inode could be updated.
*/
hadchanges = 0;
for (adp = TAILQ_FIRST(&inodedep->id_inoupdt); adp; adp = nextadp) {
nextadp = TAILQ_NEXT(adp, ad_next);
if (adp->ad_state & ATTACHED)
panic("handle_written_inodeblock: new entry");
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fstype == UFS1) {
if (adp->ad_lbn < NDADDR) {
if (dp1->di_db[adp->ad_lbn]!=adp->ad_oldblkno)
panic("%s %s #%jd mismatch %d != %jd",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
"handle_written_inodeblock:",
"direct pointer",
(intmax_t)adp->ad_lbn,
dp1->di_db[adp->ad_lbn],
(intmax_t)adp->ad_oldblkno);
dp1->di_db[adp->ad_lbn] = adp->ad_newblkno;
} else {
if (dp1->di_ib[adp->ad_lbn - NDADDR] != 0)
panic("%s: %s #%jd allocated as %d",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
"handle_written_inodeblock",
"indirect pointer",
(intmax_t)adp->ad_lbn - NDADDR,
dp1->di_ib[adp->ad_lbn - NDADDR]);
dp1->di_ib[adp->ad_lbn - NDADDR] =
adp->ad_newblkno;
}
} else {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (adp->ad_lbn < NDADDR) {
if (dp2->di_db[adp->ad_lbn]!=adp->ad_oldblkno)
panic("%s: %s #%jd %s %jd != %jd",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
"handle_written_inodeblock",
"direct pointer",
(intmax_t)adp->ad_lbn, "mismatch",
(intmax_t)dp2->di_db[adp->ad_lbn],
(intmax_t)adp->ad_oldblkno);
dp2->di_db[adp->ad_lbn] = adp->ad_newblkno;
} else {
if (dp2->di_ib[adp->ad_lbn - NDADDR] != 0)
panic("%s: %s #%jd allocated as %jd",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
"handle_written_inodeblock",
"indirect pointer",
(intmax_t)adp->ad_lbn - NDADDR,
(intmax_t)
dp2->di_ib[adp->ad_lbn - NDADDR]);
dp2->di_ib[adp->ad_lbn - NDADDR] =
adp->ad_newblkno;
}
}
adp->ad_state &= ~UNDONE;
adp->ad_state |= ATTACHED;
hadchanges = 1;
}
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
for (adp = TAILQ_FIRST(&inodedep->id_extupdt); adp; adp = nextadp) {
nextadp = TAILQ_NEXT(adp, ad_next);
if (adp->ad_state & ATTACHED)
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
panic("handle_written_inodeblock: new entry");
if (dp2->di_extb[adp->ad_lbn] != adp->ad_oldblkno)
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
panic("%s: direct pointers #%jd %s %jd != %jd",
"handle_written_inodeblock",
(intmax_t)adp->ad_lbn, "mismatch",
(intmax_t)dp2->di_extb[adp->ad_lbn],
(intmax_t)adp->ad_oldblkno);
dp2->di_extb[adp->ad_lbn] = adp->ad_newblkno;
adp->ad_state &= ~UNDONE;
adp->ad_state |= ATTACHED;
hadchanges = 1;
}
if (hadchanges && (bp->b_flags & B_DELWRI) == 0)
stat_direct_blk_ptrs++;
/*
* Reset the file size to its most up-to-date value.
*/
if (inodedep->id_savedsize == -1 || inodedep->id_savedextsize == -1)
panic("handle_written_inodeblock: bad size");
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fstype == UFS1) {
if (dp1->di_size != inodedep->id_savedsize) {
dp1->di_size = inodedep->id_savedsize;
hadchanges = 1;
}
} else {
if (dp2->di_size != inodedep->id_savedsize) {
dp2->di_size = inodedep->id_savedsize;
hadchanges = 1;
}
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (dp2->di_extsize != inodedep->id_savedextsize) {
dp2->di_extsize = inodedep->id_savedextsize;
hadchanges = 1;
}
}
inodedep->id_savedsize = -1;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
inodedep->id_savedextsize = -1;
/*
* If there were any rollbacks in the inode block, then it must be
* marked dirty so that its will eventually get written back in
* its correct form.
*/
if (hadchanges)
bdirty(bp);
/*
* Process any allocdirects that completed during the update.
*/
if ((adp = TAILQ_FIRST(&inodedep->id_inoupdt)) != NULL)
handle_allocdirect_partdone(adp);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if ((adp = TAILQ_FIRST(&inodedep->id_extupdt)) != NULL)
handle_allocdirect_partdone(adp);
/*
* Process deallocations that were held pending until the
* inode had been written to disk. Freeing of the inode
* is delayed until after all blocks have been freed to
* avoid creation of new <vfsid, inum, lbn> triples
* before the old ones have been deleted.
*/
filefree = NULL;
while ((wk = LIST_FIRST(&inodedep->id_bufwait)) != NULL) {
WORKLIST_REMOVE(wk);
switch (wk->wk_type) {
case D_FREEFILE:
/*
* We defer adding filefree to the worklist until
* all other additions have been made to ensure
* that it will be done after all the old blocks
* have been freed.
*/
if (filefree != NULL)
panic("handle_written_inodeblock: filefree");
filefree = wk;
continue;
case D_MKDIR:
handle_written_mkdir(WK_MKDIR(wk), MKDIR_PARENT);
continue;
case D_DIRADD:
diradd_inode_written(WK_DIRADD(wk), inodedep);
continue;
case D_FREEBLKS:
wk->wk_state |= COMPLETE;
if ((wk->wk_state & ALLCOMPLETE) != ALLCOMPLETE)
continue;
/* -- fall through -- */
case D_FREEFRAG:
case D_DIRREM:
add_to_worklist(wk);
continue;
case D_NEWDIRBLK:
free_newdirblk(WK_NEWDIRBLK(wk));
continue;
default:
panic("handle_written_inodeblock: Unknown type %s",
TYPENAME(wk->wk_type));
/* NOTREACHED */
}
}
if (filefree != NULL) {
if (free_inodedep(inodedep) == 0)
panic("handle_written_inodeblock: live inodedep");
add_to_worklist(filefree);
return (0);
}
/*
* If no outstanding dependencies, free it.
*/
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (free_inodedep(inodedep) ||
(TAILQ_FIRST(&inodedep->id_inoupdt) == 0 &&
TAILQ_FIRST(&inodedep->id_extupdt) == 0))
return (0);
return (hadchanges);
}
/*
* Process a diradd entry after its dependent inode has been written.
* This routine must be called with splbio interrupts blocked.
*/
static void
diradd_inode_written(dap, inodedep)
struct diradd *dap;
struct inodedep *inodedep;
{
struct pagedep *pagedep;
dap->da_state |= COMPLETE;
if ((dap->da_state & ALLCOMPLETE) == ALLCOMPLETE) {
if (dap->da_state & DIRCHG)
pagedep = dap->da_previous->dm_pagedep;
else
pagedep = dap->da_pagedep;
LIST_REMOVE(dap, da_pdlist);
LIST_INSERT_HEAD(&pagedep->pd_pendinghd, dap, da_pdlist);
}
WORKLIST_INSERT(&inodedep->id_pendinghd, &dap->da_list);
}
/*
* Handle the completion of a mkdir dependency.
*/
static void
handle_written_mkdir(mkdir, type)
struct mkdir *mkdir;
int type;
{
struct diradd *dap;
struct pagedep *pagedep;
if (mkdir->md_state != type)
panic("handle_written_mkdir: bad type");
dap = mkdir->md_diradd;
dap->da_state &= ~type;
if ((dap->da_state & (MKDIR_PARENT | MKDIR_BODY)) == 0)
dap->da_state |= DEPCOMPLETE;
if ((dap->da_state & ALLCOMPLETE) == ALLCOMPLETE) {
if (dap->da_state & DIRCHG)
pagedep = dap->da_previous->dm_pagedep;
else
pagedep = dap->da_pagedep;
LIST_REMOVE(dap, da_pdlist);
LIST_INSERT_HEAD(&pagedep->pd_pendinghd, dap, da_pdlist);
}
LIST_REMOVE(mkdir, md_mkdirs);
WORKITEM_FREE(mkdir, D_MKDIR);
}
/*
* Called from within softdep_disk_write_complete above.
* A write operation was just completed. Removed inodes can
* now be freed and associated block pointers may be committed.
* Note that this routine is always called from interrupt level
* with further splbio interrupts blocked.
*/
static int
handle_written_filepage(pagedep, bp)
struct pagedep *pagedep;
struct buf *bp; /* buffer containing the written page */
{
struct dirrem *dirrem;
struct diradd *dap, *nextdap;
struct direct *ep;
int i, chgs;
if ((pagedep->pd_state & IOSTARTED) == 0)
panic("handle_written_filepage: not started");
pagedep->pd_state &= ~IOSTARTED;
/*
* Process any directory removals that have been committed.
*/
while ((dirrem = LIST_FIRST(&pagedep->pd_dirremhd)) != NULL) {
LIST_REMOVE(dirrem, dm_next);
dirrem->dm_dirinum = pagedep->pd_ino;
add_to_worklist(&dirrem->dm_list);
}
/*
* Free any directory additions that have been committed.
* If it is a newly allocated block, we have to wait until
* the on-disk directory inode claims the new block.
*/
if ((pagedep->pd_state & NEWBLOCK) == 0)
while ((dap = LIST_FIRST(&pagedep->pd_pendinghd)) != NULL)
free_diradd(dap);
/*
* Uncommitted directory entries must be restored.
*/
for (chgs = 0, i = 0; i < DAHASHSZ; i++) {
for (dap = LIST_FIRST(&pagedep->pd_diraddhd[i]); dap;
dap = nextdap) {
nextdap = LIST_NEXT(dap, da_pdlist);
if (dap->da_state & ATTACHED)
panic("handle_written_filepage: attached");
ep = (struct direct *)
((char *)bp->b_data + dap->da_offset);
ep->d_ino = dap->da_newinum;
dap->da_state &= ~UNDONE;
dap->da_state |= ATTACHED;
chgs = 1;
/*
* If the inode referenced by the directory has
* been written out, then the dependency can be
* moved to the pending list.
*/
if ((dap->da_state & ALLCOMPLETE) == ALLCOMPLETE) {
LIST_REMOVE(dap, da_pdlist);
LIST_INSERT_HEAD(&pagedep->pd_pendinghd, dap,
da_pdlist);
}
}
}
/*
* If there were any rollbacks in the directory, then it must be
* marked dirty so that its will eventually get written back in
* its correct form.
*/
if (chgs) {
if ((bp->b_flags & B_DELWRI) == 0)
stat_dir_entry++;
bdirty(bp);
return (1);
}
/*
* If we are not waiting for a new directory block to be
* claimed by its inode, then the pagedep will be freed.
* Otherwise it will remain to track any new entries on
* the page in case they are fsync'ed.
*/
if ((pagedep->pd_state & NEWBLOCK) == 0) {
LIST_REMOVE(pagedep, pd_hash);
WORKITEM_FREE(pagedep, D_PAGEDEP);
}
return (0);
}
/*
* Writing back in-core inode structures.
*
2002-05-16 21:28:32 +00:00
* The filesystem only accesses an inode's contents when it occupies an
* "in-core" inode structure. These "in-core" structures are separate from
* the page frames used to cache inode blocks. Only the latter are
* transferred to/from the disk. So, when the updated contents of the
* "in-core" inode structure are copied to the corresponding in-memory inode
* block, the dependencies are also transferred. The following procedure is
* called when copying a dirty "in-core" inode to a cached inode block.
*/
/*
* Called when an inode is loaded from disk. If the effective link count
* differed from the actual link count when it was last flushed, then we
* need to ensure that the correct effective link count is put back.
*/
void
softdep_load_inodeblock(ip)
struct inode *ip; /* the "in_core" copy of the inode */
{
struct inodedep *inodedep;
/*
* Check for alternate nlink count.
*/
ip->i_effnlink = ip->i_nlink;
ACQUIRE_LOCK(&lk);
if (inodedep_lookup(UFSTOVFS(ip->i_ump),
ip->i_number, 0, &inodedep) == 0) {
FREE_LOCK(&lk);
return;
}
ip->i_effnlink -= inodedep->id_nlinkdelta;
if (inodedep->id_state & SPACECOUNTED)
ip->i_flag |= IN_SPACECOUNTED;
FREE_LOCK(&lk);
}
/*
* This routine is called just before the "in-core" inode
* information is to be copied to the in-memory inode block.
* Recall that an inode block contains several inodes. If
* the force flag is set, then the dependencies will be
* cleared so that the update can always be made. Note that
* the buffer is locked when this routine is called, so we
* will never be in the middle of writing the inode block
* to disk.
*/
void
softdep_update_inodeblock(ip, bp, waitfor)
struct inode *ip; /* the "in_core" copy of the inode */
struct buf *bp; /* the buffer containing the inode block */
int waitfor; /* nonzero => update must be allowed */
{
struct inodedep *inodedep;
struct worklist *wk;
struct mount *mp;
struct buf *ibp;
int error;
/*
* If the effective link count is not equal to the actual link
* count, then we must track the difference in an inodedep while
* the inode is (potentially) tossed out of the cache. Otherwise,
* if there is no existing inodedep, then there are no dependencies
* to track.
*/
mp = UFSTOVFS(ip->i_ump);
ACQUIRE_LOCK(&lk);
if (inodedep_lookup(mp, ip->i_number, 0, &inodedep) == 0) {
FREE_LOCK(&lk);
if (ip->i_effnlink != ip->i_nlink)
panic("softdep_update_inodeblock: bad link count");
return;
}
if (inodedep->id_nlinkdelta != ip->i_nlink - ip->i_effnlink)
panic("softdep_update_inodeblock: bad delta");
/*
* Changes have been initiated. Anything depending on these
* changes cannot occur until this inode has been written.
*/
inodedep->id_state &= ~COMPLETE;
if ((inodedep->id_state & ONWORKLIST) == 0)
WORKLIST_INSERT(&bp->b_dep, &inodedep->id_list);
/*
* Any new dependencies associated with the incore inode must
* now be moved to the list associated with the buffer holding
* the in-memory copy of the inode. Once merged process any
* allocdirects that are completed by the merger.
*/
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
merge_inode_lists(&inodedep->id_newinoupdt, &inodedep->id_inoupdt);
2007-04-04 07:29:53 +00:00
if (!TAILQ_EMPTY(&inodedep->id_inoupdt))
handle_allocdirect_partdone(TAILQ_FIRST(&inodedep->id_inoupdt));
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
merge_inode_lists(&inodedep->id_newextupdt, &inodedep->id_extupdt);
2007-04-04 07:29:53 +00:00
if (!TAILQ_EMPTY(&inodedep->id_extupdt))
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
handle_allocdirect_partdone(TAILQ_FIRST(&inodedep->id_extupdt));
/*
* Now that the inode has been pushed into the buffer, the
* operations dependent on the inode being written to disk
* can be moved to the id_bufwait so that they will be
* processed when the buffer I/O completes.
*/
while ((wk = LIST_FIRST(&inodedep->id_inowait)) != NULL) {
WORKLIST_REMOVE(wk);
WORKLIST_INSERT(&inodedep->id_bufwait, wk);
}
/*
* Newly allocated inodes cannot be written until the bitmap
* that allocates them have been written (indicated by
* DEPCOMPLETE being set in id_state). If we are doing a
* forced sync (e.g., an fsync on a file), we force the bitmap
* to be written so that the update can be done.
*/
if (waitfor == 0) {
FREE_LOCK(&lk);
return;
}
retry:
if ((inodedep->id_state & DEPCOMPLETE) != 0) {
FREE_LOCK(&lk);
return;
}
ibp = inodedep->id_buf;
ibp = getdirtybuf(ibp, &lk, MNT_WAIT);
if (ibp == NULL) {
/*
* If ibp came back as NULL, the dependency could have been
* freed while we slept. Look it up again, and check to see
* that it has completed.
*/
if (inodedep_lookup(mp, ip->i_number, 0, &inodedep) != 0)
goto retry;
FREE_LOCK(&lk);
return;
}
FREE_LOCK(&lk);
if ((error = bwrite(ibp)) != 0)
softdep_error("softdep_update_inodeblock: bwrite", error);
}
/*
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
* Merge the a new inode dependency list (such as id_newinoupdt) into an
* old inode dependency list (such as id_inoupdt). This routine must be
* called with splbio interrupts blocked.
*/
static void
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
merge_inode_lists(newlisthead, oldlisthead)
struct allocdirectlst *newlisthead;
struct allocdirectlst *oldlisthead;
{
struct allocdirect *listadp, *newadp;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
newadp = TAILQ_FIRST(newlisthead);
for (listadp = TAILQ_FIRST(oldlisthead); listadp && newadp;) {
if (listadp->ad_lbn < newadp->ad_lbn) {
listadp = TAILQ_NEXT(listadp, ad_next);
continue;
}
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
TAILQ_REMOVE(newlisthead, newadp, ad_next);
TAILQ_INSERT_BEFORE(listadp, newadp, ad_next);
if (listadp->ad_lbn == newadp->ad_lbn) {
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
allocdirect_merge(oldlisthead, newadp,
listadp);
listadp = newadp;
}
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
newadp = TAILQ_FIRST(newlisthead);
}
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
while ((newadp = TAILQ_FIRST(newlisthead)) != NULL) {
TAILQ_REMOVE(newlisthead, newadp, ad_next);
TAILQ_INSERT_TAIL(oldlisthead, newadp, ad_next);
}
}
/*
* If we are doing an fsync, then we must ensure that any directory
* entries for the inode have been written after the inode gets to disk.
*/
int
softdep_fsync(vp)
struct vnode *vp; /* the "in_core" copy of the inode */
{
struct inodedep *inodedep;
struct pagedep *pagedep;
struct worklist *wk;
struct diradd *dap;
struct mount *mp;
struct vnode *pvp;
struct inode *ip;
struct buf *bp;
struct fs *fs;
struct thread *td = curthread;
int error, flushparent, pagedep_new_block;
ino_t parentino;
ufs_lbn_t lbn;
ip = VTOI(vp);
fs = ip->i_fs;
mp = vp->v_mount;
ACQUIRE_LOCK(&lk);
if (inodedep_lookup(mp, ip->i_number, 0, &inodedep) == 0) {
FREE_LOCK(&lk);
return (0);
}
2007-04-04 07:29:53 +00:00
if (!LIST_EMPTY(&inodedep->id_inowait) ||
!LIST_EMPTY(&inodedep->id_bufwait) ||
!TAILQ_EMPTY(&inodedep->id_extupdt) ||
!TAILQ_EMPTY(&inodedep->id_newextupdt) ||
!TAILQ_EMPTY(&inodedep->id_inoupdt) ||
!TAILQ_EMPTY(&inodedep->id_newinoupdt))
panic("softdep_fsync: pending ops");
for (error = 0, flushparent = 0; ; ) {
if ((wk = LIST_FIRST(&inodedep->id_pendinghd)) == NULL)
break;
if (wk->wk_type != D_DIRADD)
panic("softdep_fsync: Unexpected type %s",
TYPENAME(wk->wk_type));
dap = WK_DIRADD(wk);
/*
* Flush our parent if this directory entry has a MKDIR_PARENT
* dependency or is contained in a newly allocated block.
*/
if (dap->da_state & DIRCHG)
pagedep = dap->da_previous->dm_pagedep;
else
pagedep = dap->da_pagedep;
parentino = pagedep->pd_ino;
lbn = pagedep->pd_lbn;
if ((dap->da_state & (MKDIR_BODY | COMPLETE)) != COMPLETE)
panic("softdep_fsync: dirty");
if ((dap->da_state & MKDIR_PARENT) ||
(pagedep->pd_state & NEWBLOCK))
flushparent = 1;
else
flushparent = 0;
/*
* If we are being fsync'ed as part of vgone'ing this vnode,
* then we will not be able to release and recover the
* vnode below, so we just have to give up on writing its
* directory entry out. It will eventually be written, just
* not now, but then the user was not asking to have it
* written, so we are not breaking any promises.
*/
if (vp->v_iflag & VI_DOOMED)
break;
/*
* We prevent deadlock by always fetching inodes from the
* root, moving down the directory tree. Thus, when fetching
* our parent directory, we first try to get the lock. If
* that fails, we must unlock ourselves before requesting
* the lock on our parent. See the comment in ufs_lookup
* for details on possible races.
*/
FREE_LOCK(&lk);
if (ffs_vget(mp, parentino, LK_NOWAIT | LK_EXCLUSIVE, &pvp)) {
VOP_UNLOCK(vp, 0);
error = ffs_vget(mp, parentino, LK_EXCLUSIVE, &pvp);
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
if (error != 0)
return (error);
}
/*
* All MKDIR_PARENT dependencies and all the NEWBLOCK pagedeps
* that are contained in direct blocks will be resolved by
* doing a ffs_update. Pagedeps contained in indirect blocks
* may require a complete sync'ing of the directory. So, we
* try the cheap and fast ffs_update first, and if that fails,
* then we do the slower ffs_syncvnode of the directory.
*/
if (flushparent) {
int locked;
if ((error = ffs_update(pvp, 1)) != 0) {
vput(pvp);
return (error);
}
ACQUIRE_LOCK(&lk);
locked = 1;
if (inodedep_lookup(mp, ip->i_number, 0, &inodedep) != 0) {
if ((wk = LIST_FIRST(&inodedep->id_pendinghd)) != NULL) {
if (wk->wk_type != D_DIRADD)
panic("softdep_fsync: Unexpected type %s",
TYPENAME(wk->wk_type));
dap = WK_DIRADD(wk);
if (dap->da_state & DIRCHG)
pagedep = dap->da_previous->dm_pagedep;
else
pagedep = dap->da_pagedep;
pagedep_new_block = pagedep->pd_state & NEWBLOCK;
FREE_LOCK(&lk);
locked = 0;
if (pagedep_new_block &&
(error = ffs_syncvnode(pvp, MNT_WAIT))) {
vput(pvp);
return (error);
}
}
}
if (locked)
FREE_LOCK(&lk);
}
/*
* Flush directory page containing the inode's name.
*/
error = bread(pvp, lbn, blksize(fs, VTOI(pvp), lbn), td->td_ucred,
&bp);
if (error == 0)
error = bwrite(bp);
else
brelse(bp);
vput(pvp);
if (error != 0)
return (error);
ACQUIRE_LOCK(&lk);
if (inodedep_lookup(mp, ip->i_number, 0, &inodedep) == 0)
break;
}
FREE_LOCK(&lk);
return (0);
}
/*
* Flush all the dirty bitmaps associated with the block device
* before flushing the rest of the dirty blocks so as to reduce
* the number of dependencies that will have to be rolled back.
*/
void
softdep_fsync_mountdev(vp)
struct vnode *vp;
{
struct buf *bp, *nbp;
struct worklist *wk;
struct bufobj *bo;
if (!vn_isdisk(vp, NULL))
panic("softdep_fsync_mountdev: vnode not a disk");
bo = &vp->v_bufobj;
restart:
BO_LOCK(bo);
ACQUIRE_LOCK(&lk);
TAILQ_FOREACH_SAFE(bp, &bo->bo_dirty.bv_hd, b_bobufs, nbp) {
/*
* If it is already scheduled, skip to the next buffer.
*/
if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT, NULL))
continue;
if ((bp->b_flags & B_DELWRI) == 0)
panic("softdep_fsync_mountdev: not dirty");
/*
* We are only interested in bitmaps with outstanding
* dependencies.
*/
if ((wk = LIST_FIRST(&bp->b_dep)) == NULL ||
wk->wk_type != D_BMSAFEMAP ||
(bp->b_vflags & BV_BKGRDINPROG)) {
BUF_UNLOCK(bp);
continue;
}
FREE_LOCK(&lk);
BO_UNLOCK(bo);
bremfree(bp);
(void) bawrite(bp);
goto restart;
}
FREE_LOCK(&lk);
drain_output(vp);
BO_UNLOCK(bo);
}
/*
* This routine is called when we are trying to synchronously flush a
* file. This routine must eliminate any filesystem metadata dependencies
* so that the syncing routine can succeed by pushing the dirty blocks
* associated with the file. If any I/O errors occur, they are returned.
*/
int
softdep_sync_metadata(struct vnode *vp)
{
struct pagedep *pagedep;
struct allocdirect *adp;
struct allocindir *aip;
struct buf *bp, *nbp;
struct worklist *wk;
struct bufobj *bo;
int i, error, waitfor;
Move UFS from DEVFS backing to GEOM backing. This eliminates a bunch of vnode overhead (approx 1-2 % speed improvement) and gives us more control over the access to the storage device. Access counts on the underlying device are not correctly tracked and therefore it is possible to read-only mount the same disk device multiple times: syv# mount -p /dev/md0 /var ufs rw 2 2 /dev/ad0 /mnt ufs ro 1 1 /dev/ad0 /mnt2 ufs ro 1 1 /dev/ad0 /mnt3 ufs ro 1 1 Since UFS/FFS is not a synchrousely consistent filesystem (ie: it caches things in RAM) this is not possible with read-write mounts, and the system will correctly reject this. Details: Add a geom consumer and a bufobj pointer to ufsmount. Eliminate the vnode argument from softdep_disk_prewrite(). Pick the vnode out of bp->b_vp for now. Eventually we should find it through bp->b_bufobj->b_private. In the mountcode, use g_vfs_open() once we have used VOP_ACCESS() to check permissions. When upgrading and downgrading between r/o and r/w do the right thing with GEOM access counts. Remove all the workarounds for not being able to do this with VOP_OPEN(). If we are the root mount, drop the exclusive access count until we upgrade to r/w. This allows fsck of the root filesystem and the MNT_RELOAD to work correctly. Set bo_private to the GEOM consumer on the device bufobj. Change the ffs_ops->strategy function to call g_vfs_strategy() In ufs_strategy() directly call the strategy on the disk bufobj. Same in rawread. In ffs_fsync() we will no longer see VCHR device nodes, so remove code which synced the filesystem mounted on it, in case we came there. I'm not sure this code made sense in the first place since we would have taken the specfs route on such a vnode. Redo the highly bogus readblock() function in the snapshot code to something slightly less bogus: Constructing an uio and using physio was really quite a detour. Instead just fill in a bio and ship it down.
2004-10-29 10:15:56 +00:00
if (!DOINGSOFTDEP(vp))
return (0);
/*
* Ensure that any direct block dependencies have been cleared.
*/
ACQUIRE_LOCK(&lk);
if ((error = flush_inodedep_deps(vp->v_mount, VTOI(vp)->i_number))) {
FREE_LOCK(&lk);
return (error);
}
FREE_LOCK(&lk);
/*
* For most files, the only metadata dependencies are the
* cylinder group maps that allocate their inode or blocks.
* The block allocation dependencies can be found by traversing
* the dependency lists for any buffers that remain on their
* dirty buffer list. The inode allocation dependency will
* be resolved when the inode is updated with MNT_WAIT.
* This work is done in two passes. The first pass grabs most
* of the buffers and begins asynchronously writing them. The
* only way to wait for these asynchronous writes is to sleep
* on the filesystem vnode which may stay busy for a long time
* if the filesystem is active. So, instead, we make a second
* pass over the dependencies blocking on each write. In the
* usual case we will be blocking against a write that we
* initiated, so when it is done the dependency will have been
* resolved. Thus the second pass is expected to end quickly.
*/
waitfor = MNT_NOWAIT;
bo = &vp->v_bufobj;
top:
/*
* We must wait for any I/O in progress to finish so that
* all potential buffers on the dirty list will be visible.
*/
BO_LOCK(bo);
drain_output(vp);
while ((bp = TAILQ_FIRST(&bo->bo_dirty.bv_hd)) != NULL) {
bp = getdirtybuf(bp, BO_MTX(bo), MNT_WAIT);
if (bp)
break;
}
BO_UNLOCK(bo);
if (bp == NULL)
return (0);
loop:
/* While syncing snapshots, we must allow recursive lookups */
BUF_AREC(bp);
ACQUIRE_LOCK(&lk);
/*
* As we hold the buffer locked, none of its dependencies
* will disappear.
*/
LIST_FOREACH(wk, &bp->b_dep, wk_list) {
switch (wk->wk_type) {
case D_ALLOCDIRECT:
adp = WK_ALLOCDIRECT(wk);
if (adp->ad_state & DEPCOMPLETE)
continue;
nbp = adp->ad_buf;
nbp = getdirtybuf(nbp, &lk, waitfor);
if (nbp == NULL)
continue;
FREE_LOCK(&lk);
if (waitfor == MNT_NOWAIT) {
bawrite(nbp);
} else if ((error = bwrite(nbp)) != 0) {
break;
}
ACQUIRE_LOCK(&lk);
continue;
case D_ALLOCINDIR:
aip = WK_ALLOCINDIR(wk);
if (aip->ai_state & DEPCOMPLETE)
continue;
nbp = aip->ai_buf;
nbp = getdirtybuf(nbp, &lk, waitfor);
if (nbp == NULL)
continue;
FREE_LOCK(&lk);
if (waitfor == MNT_NOWAIT) {
bawrite(nbp);
} else if ((error = bwrite(nbp)) != 0) {
break;
}
ACQUIRE_LOCK(&lk);
continue;
case D_INDIRDEP:
restart:
2001-02-04 12:37:48 +00:00
LIST_FOREACH(aip, &WK_INDIRDEP(wk)->ir_deplisthd, ai_next) {
if (aip->ai_state & DEPCOMPLETE)
continue;
nbp = aip->ai_buf;
nbp = getdirtybuf(nbp, &lk, MNT_WAIT);
if (nbp == NULL)
goto restart;
FREE_LOCK(&lk);
if ((error = bwrite(nbp)) != 0) {
goto loop_end;
}
ACQUIRE_LOCK(&lk);
goto restart;
}
continue;
case D_INODEDEP:
if ((error = flush_inodedep_deps(wk->wk_mp,
WK_INODEDEP(wk)->id_ino)) != 0) {
FREE_LOCK(&lk);
break;
}
continue;
case D_PAGEDEP:
/*
* We are trying to sync a directory that may
* have dependencies on both its own metadata
* and/or dependencies on the inodes of any
* recently allocated files. We walk its diradd
* lists pushing out the associated inode.
*/
pagedep = WK_PAGEDEP(wk);
for (i = 0; i < DAHASHSZ; i++) {
if (LIST_FIRST(&pagedep->pd_diraddhd[i]) == 0)
continue;
if ((error =
flush_pagedep_deps(vp, wk->wk_mp,
&pagedep->pd_diraddhd[i]))) {
FREE_LOCK(&lk);
goto loop_end;
}
}
continue;
case D_MKDIR:
/*
* This case should never happen if the vnode has
* been properly sync'ed. However, if this function
* is used at a place where the vnode has not yet
* been sync'ed, this dependency can show up. So,
* rather than panic, just flush it.
*/
nbp = WK_MKDIR(wk)->md_buf;
nbp = getdirtybuf(nbp, &lk, waitfor);
if (nbp == NULL)
continue;
FREE_LOCK(&lk);
if (waitfor == MNT_NOWAIT) {
bawrite(nbp);
} else if ((error = bwrite(nbp)) != 0) {
break;
}
ACQUIRE_LOCK(&lk);
continue;
case D_BMSAFEMAP:
/*
* This case should never happen if the vnode has
* been properly sync'ed. However, if this function
* is used at a place where the vnode has not yet
* been sync'ed, this dependency can show up. So,
* rather than panic, just flush it.
*/
nbp = WK_BMSAFEMAP(wk)->sm_buf;
nbp = getdirtybuf(nbp, &lk, waitfor);
if (nbp == NULL)
continue;
FREE_LOCK(&lk);
if (waitfor == MNT_NOWAIT) {
bawrite(nbp);
} else if ((error = bwrite(nbp)) != 0) {
break;
}
ACQUIRE_LOCK(&lk);
continue;
default:
panic("softdep_sync_metadata: Unknown type %s",
TYPENAME(wk->wk_type));
/* NOTREACHED */
}
loop_end:
/* We reach here only in error and unlocked */
if (error == 0)
panic("softdep_sync_metadata: zero error");
BUF_NOREC(bp);
bawrite(bp);
return (error);
}
FREE_LOCK(&lk);
BO_LOCK(bo);
while ((nbp = TAILQ_NEXT(bp, b_bobufs)) != NULL) {
nbp = getdirtybuf(nbp, BO_MTX(bo), MNT_WAIT);
if (nbp)
break;
}
BO_UNLOCK(bo);
BUF_NOREC(bp);
bawrite(bp);
if (nbp != NULL) {
bp = nbp;
goto loop;
}
/*
* The brief unlock is to allow any pent up dependency
* processing to be done. Then proceed with the second pass.
*/
if (waitfor == MNT_NOWAIT) {
waitfor = MNT_WAIT;
goto top;
}
/*
* If we have managed to get rid of all the dirty buffers,
* then we are done. For certain directories and block
* devices, we may need to do further work.
*
* We must wait for any I/O in progress to finish so that
* all potential buffers on the dirty list will be visible.
*/
BO_LOCK(bo);
drain_output(vp);
BO_UNLOCK(bo);
return (0);
}
/*
* Flush the dependencies associated with an inodedep.
* Called with splbio blocked.
*/
static int
flush_inodedep_deps(mp, ino)
struct mount *mp;
ino_t ino;
{
struct inodedep *inodedep;
int error, waitfor;
/*
* This work is done in two passes. The first pass grabs most
* of the buffers and begins asynchronously writing them. The
* only way to wait for these asynchronous writes is to sleep
* on the filesystem vnode which may stay busy for a long time
* if the filesystem is active. So, instead, we make a second
* pass over the dependencies blocking on each write. In the
* usual case we will be blocking against a write that we
* initiated, so when it is done the dependency will have been
* resolved. Thus the second pass is expected to end quickly.
* We give a brief window at the top of the loop to allow
* any pending I/O to complete.
*/
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
for (error = 0, waitfor = MNT_NOWAIT; ; ) {
if (error)
return (error);
FREE_LOCK(&lk);
ACQUIRE_LOCK(&lk);
if (inodedep_lookup(mp, ino, 0, &inodedep) == 0)
return (0);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (flush_deplist(&inodedep->id_inoupdt, waitfor, &error) ||
flush_deplist(&inodedep->id_newinoupdt, waitfor, &error) ||
flush_deplist(&inodedep->id_extupdt, waitfor, &error) ||
flush_deplist(&inodedep->id_newextupdt, waitfor, &error))
continue;
/*
* If pass2, we are done, otherwise do pass 2.
*/
if (waitfor == MNT_WAIT)
break;
waitfor = MNT_WAIT;
}
/*
* Try freeing inodedep in case all dependencies have been removed.
*/
if (inodedep_lookup(mp, ino, 0, &inodedep) != 0)
(void) free_inodedep(inodedep);
return (0);
}
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
/*
* Flush an inode dependency list.
* Called with splbio blocked.
*/
static int
flush_deplist(listhead, waitfor, errorp)
struct allocdirectlst *listhead;
int waitfor;
int *errorp;
{
struct allocdirect *adp;
struct buf *bp;
mtx_assert(&lk, MA_OWNED);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
TAILQ_FOREACH(adp, listhead, ad_next) {
if (adp->ad_state & DEPCOMPLETE)
continue;
bp = adp->ad_buf;
bp = getdirtybuf(bp, &lk, waitfor);
if (bp == NULL) {
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (waitfor == MNT_NOWAIT)
continue;
return (1);
}
FREE_LOCK(&lk);
if (waitfor == MNT_NOWAIT) {
bawrite(bp);
} else if ((*errorp = bwrite(bp)) != 0) {
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
ACQUIRE_LOCK(&lk);
return (1);
}
ACQUIRE_LOCK(&lk);
return (1);
}
return (0);
}
/*
* Eliminate a pagedep dependency by flushing out all its diradd dependencies.
* Called with splbio blocked.
*/
static int
flush_pagedep_deps(pvp, mp, diraddhdp)
struct vnode *pvp;
struct mount *mp;
struct diraddhd *diraddhdp;
{
struct inodedep *inodedep;
struct ufsmount *ump;
struct diradd *dap;
struct vnode *vp;
struct bufobj *bo;
int error = 0;
struct buf *bp;
ino_t inum;
struct worklist *wk;
ump = VFSTOUFS(mp);
while ((dap = LIST_FIRST(diraddhdp)) != NULL) {
/*
* Flush ourselves if this directory entry
* has a MKDIR_PARENT dependency.
*/
if (dap->da_state & MKDIR_PARENT) {
FREE_LOCK(&lk);
if ((error = ffs_update(pvp, 1)) != 0)
break;
ACQUIRE_LOCK(&lk);
/*
* If that cleared dependencies, go on to next.
*/
if (dap != LIST_FIRST(diraddhdp))
continue;
if (dap->da_state & MKDIR_PARENT)
panic("flush_pagedep_deps: MKDIR_PARENT");
}
/*
* A newly allocated directory must have its "." and
* ".." entries written out before its name can be
* committed in its parent. We do not want or need
* the full semantics of a synchronous ffs_syncvnode as
* that may end up here again, once for each directory
* level in the filesystem. Instead, we push the blocks
* and wait for them to clear. We have to fsync twice
* because the first call may choose to defer blocks
* that still have dependencies, but deferral will
* happen at most once.
*/
inum = dap->da_newinum;
if (dap->da_state & MKDIR_BODY) {
FREE_LOCK(&lk);
if ((error = ffs_vget(mp, inum, LK_EXCLUSIVE, &vp)))
break;
if ((error=ffs_syncvnode(vp, MNT_NOWAIT)) ||
(error=ffs_syncvnode(vp, MNT_NOWAIT))) {
vput(vp);
break;
}
bo = &vp->v_bufobj;
BO_LOCK(bo);
drain_output(vp);
/*
* If first block is still dirty with a D_MKDIR
* dependency then it needs to be written now.
*/
for (;;) {
error = 0;
bp = gbincore(bo, 0);
if (bp == NULL)
break; /* First block not present */
error = BUF_LOCK(bp,
LK_EXCLUSIVE |
LK_SLEEPFAIL |
LK_INTERLOCK,
BO_MTX(bo));
BO_LOCK(bo);
if (error == ENOLCK)
continue; /* Slept, retry */
if (error != 0)
break; /* Failed */
if ((bp->b_flags & B_DELWRI) == 0) {
BUF_UNLOCK(bp);
break; /* Buffer not dirty */
}
for (wk = LIST_FIRST(&bp->b_dep);
wk != NULL;
wk = LIST_NEXT(wk, wk_list))
if (wk->wk_type == D_MKDIR)
break;
if (wk == NULL)
BUF_UNLOCK(bp); /* Dependency gone */
else {
/*
* D_MKDIR dependency remains,
* must write buffer to stable
* storage.
*/
BO_UNLOCK(bo);
bremfree(bp);
error = bwrite(bp);
BO_LOCK(bo);
}
break;
}
BO_UNLOCK(bo);
vput(vp);
if (error != 0)
break; /* Flushing of first block failed */
ACQUIRE_LOCK(&lk);
/*
* If that cleared dependencies, go on to next.
*/
if (dap != LIST_FIRST(diraddhdp))
continue;
if (dap->da_state & MKDIR_BODY)
panic("flush_pagedep_deps: MKDIR_BODY");
}
/*
* Flush the inode on which the directory entry depends.
* Having accounted for MKDIR_PARENT and MKDIR_BODY above,
* the only remaining dependency is that the updated inode
* count must get pushed to disk. The inode has already
* been pushed into its inode buffer (via VOP_UPDATE) at
* the time of the reference count change. So we need only
* locate that buffer, ensure that there will be no rollback
* caused by a bitmap dependency, then write the inode buffer.
*/
retry:
if (inodedep_lookup(UFSTOVFS(ump), inum, 0, &inodedep) == 0)
panic("flush_pagedep_deps: lost inode");
/*
* If the inode still has bitmap dependencies,
* push them to disk.
*/
if ((inodedep->id_state & DEPCOMPLETE) == 0) {
bp = inodedep->id_buf;
bp = getdirtybuf(bp, &lk, MNT_WAIT);
if (bp == NULL)
goto retry;
FREE_LOCK(&lk);
if ((error = bwrite(bp)) != 0)
break;
ACQUIRE_LOCK(&lk);
if (dap != LIST_FIRST(diraddhdp))
continue;
}
/*
* If the inode is still sitting in a buffer waiting
* to be written, push it to disk.
*/
FREE_LOCK(&lk);
if ((error = bread(ump->um_devvp,
fsbtodb(ump->um_fs, ino_to_fsba(ump->um_fs, inum)),
(int)ump->um_fs->fs_bsize, NOCRED, &bp)) != 0) {
brelse(bp);
break;
}
if ((error = bwrite(bp)) != 0)
break;
ACQUIRE_LOCK(&lk);
/*
* If we have failed to get rid of all the dependencies
* then something is seriously wrong.
*/
if (dap == LIST_FIRST(diraddhdp))
panic("flush_pagedep_deps: flush failed");
}
if (error)
ACQUIRE_LOCK(&lk);
return (error);
}
/*
* A large burst of file addition or deletion activity can drive the
* memory load excessively high. First attempt to slow things down
* using the techniques below. If that fails, this routine requests
* the offending operations to fall back to running synchronously
* until the memory load returns to a reasonable level.
*/
int
softdep_slowdown(vp)
struct vnode *vp;
{
int max_softdeps_hard;
ACQUIRE_LOCK(&lk);
max_softdeps_hard = max_softdeps * 11 / 10;
if (num_dirrem < max_softdeps_hard / 2 &&
num_inodedep < max_softdeps_hard &&
VFSTOUFS(vp->v_mount)->um_numindirdeps < maxindirdeps) {
FREE_LOCK(&lk);
return (0);
}
if (VFSTOUFS(vp->v_mount)->um_numindirdeps >= maxindirdeps)
softdep_speedup();
stat_sync_limit_hit += 1;
FREE_LOCK(&lk);
return (1);
}
/*
* Called by the allocation routines when they are about to fail
* in the hope that we can free up some disk space.
*
* First check to see if the work list has anything on it. If it has,
* clean up entries until we successfully free some space. Because this
* process holds inodes locked, we cannot handle any remove requests
* that might block on a locked inode as that could lead to deadlock.
* If the worklist yields no free space, encourage the syncer daemon
* to help us. In no event will we try for longer than tickdelay seconds.
*/
int
softdep_request_cleanup(fs, vp)
struct fs *fs;
struct vnode *vp;
{
struct ufsmount *ump;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
long starttime;
ufs2_daddr_t needed;
int error;
ump = VTOI(vp)->i_ump;
mtx_assert(UFS_MTX(ump), MA_OWNED);
needed = fs->fs_cstotal.cs_nbfree + fs->fs_contigsumsize;
starttime = time_second + tickdelay;
/*
* If we are being called because of a process doing a
* copy-on-write, then it is not safe to update the vnode
* as we may recurse into the copy-on-write routine.
*/
if (!(curthread->td_pflags & TDP_COWINPROGRESS)) {
UFS_UNLOCK(ump);
error = ffs_update(vp, 1);
UFS_LOCK(ump);
if (error != 0)
return (0);
}
while (fs->fs_pendingblocks > 0 && fs->fs_cstotal.cs_nbfree <= needed) {
if (time_second > starttime)
return (0);
UFS_UNLOCK(ump);
ACQUIRE_LOCK(&lk);
if (ump->softdep_on_worklist > 0 &&
process_worklist_item(UFSTOVFS(ump), LK_NOWAIT) != -1) {
stat_worklist_push += 1;
FREE_LOCK(&lk);
UFS_LOCK(ump);
continue;
}
request_cleanup(UFSTOVFS(ump), FLUSH_REMOVE_WAIT);
FREE_LOCK(&lk);
UFS_LOCK(ump);
}
return (1);
}
/*
* If memory utilization has gotten too high, deliberately slow things
* down and speed up the I/O processing.
*/
extern struct thread *syncertd;
static int
request_cleanup(mp, resource)
struct mount *mp;
int resource;
{
struct thread *td = curthread;
struct ufsmount *ump;
mtx_assert(&lk, MA_OWNED);
/*
* We never hold up the filesystem syncer or buf daemon.
*/
if (td->td_pflags & (TDP_SOFTDEP|TDP_NORUNNINGBUF))
return (0);
ump = VFSTOUFS(mp);
/*
* First check to see if the work list has gotten backlogged.
* If it has, co-opt this process to help clean up two entries.
* Because this process may hold inodes locked, we cannot
* handle any remove requests that might block on a locked
* inode as that could lead to deadlock. We set TDP_SOFTDEP
* to avoid recursively processing the worklist.
*/
if (ump->softdep_on_worklist > max_softdeps / 10) {
td->td_pflags |= TDP_SOFTDEP;
process_worklist_item(mp, LK_NOWAIT);
process_worklist_item(mp, LK_NOWAIT);
td->td_pflags &= ~TDP_SOFTDEP;
stat_worklist_push += 2;
This patch corrects two problems with the rate limiting code that was introduced in revision 1.80. The problem manifested itself with a `locking against myself' panic and could also result in soft updates inconsistences associated with inodedeps. The two problems are: 1) One of the background operations could manipulate the bitmap while holding it locked with intent to create. This held lock results in a `locking against myself' panic, when the background processing that we have been coopted to do tries to lock the bitmap which we are already holding locked. To understand how to fix this problem, first, observe that we can do the background cleanups in inodedep_lookup only when allocating inodedeps (DEPALLOC is set in the call to inodedep_lookup). Second observe that calls to inodedep_lookup with DEPALLOC set can only happen from the following calls into the softdep code: softdep_setup_inomapdep softdep_setup_allocdirect softdep_setup_remove softdep_setup_freeblocks softdep_setup_directory_change softdep_setup_directory_add softdep_change_linkcnt Only the first two of these can come from ffs_alloc.c while holding a bitmap locked. Thus, inodedep_lookup must not go off to do request_cleanups when being called from these functions. This change adds a flag, NODELAY, that can be passed to inodedep_lookup to let it know that it should not do background processing in those cases. 2) The return value from request_cleanup when helping out with the cleanup was 0 instead of 1. This meant that despite the fact that we may have slept while doing the cleanups, the code did not recheck for the appearance of an inodedep (e.g., goto top in inodedep_lookup). This lead to the softdep inconsistency in which we ended up with two inodedep's for the same inode. Reviewed by: Peter Wemm <peter@yahoo-inc.com>, Matt Dillon <dillon@earth.backplane.com>
2001-02-20 11:14:38 +00:00
return(1);
}
/*
* Next, we attempt to speed up the syncer process. If that
* is successful, then we allow the process to continue.
*/
if (softdep_speedup() && resource != FLUSH_REMOVE_WAIT)
return(0);
/*
* If we are resource constrained on inode dependencies, try
* flushing some dirty inodes. Otherwise, we are constrained
* by file deletions, so try accelerating flushes of directories
* with removal dependencies. We would like to do the cleanup
* here, but we probably hold an inode locked at this point and
* that might deadlock against one that we try to clean. So,
* the best that we can do is request the syncer daemon to do
* the cleanup for us.
*/
switch (resource) {
case FLUSH_INODES:
stat_ino_limit_push += 1;
req_clear_inodedeps += 1;
stat_countp = &stat_ino_limit_hit;
break;
case FLUSH_REMOVE:
case FLUSH_REMOVE_WAIT:
stat_blk_limit_push += 1;
req_clear_remove += 1;
stat_countp = &stat_blk_limit_hit;
break;
default:
panic("request_cleanup: unknown type");
}
/*
* Hopefully the syncer daemon will catch up and awaken us.
* We wait at most tickdelay before proceeding in any case.
*/
proc_waiting += 1;
if (callout_pending(&softdep_callout) == FALSE)
callout_reset(&softdep_callout, tickdelay > 2 ? tickdelay : 2,
pause_timer, 0);
msleep((caddr_t)&proc_waiting, &lk, PPAUSE, "softupdate", 0);
proc_waiting -= 1;
return (1);
}
/*
* Awaken processes pausing in request_cleanup and clear proc_waiting
* to indicate that there is no longer a timer running.
*/
static void
pause_timer(arg)
void *arg;
{
/*
* The callout_ API has acquired mtx and will hold it around this
* function call.
*/
*stat_countp += 1;
wakeup_one(&proc_waiting);
if (proc_waiting > 0)
callout_reset(&softdep_callout, tickdelay > 2 ? tickdelay : 2,
pause_timer, 0);
}
/*
* Flush out a directory with at least one removal dependency in an effort to
* reduce the number of dirrem, freefile, and freeblks dependency structures.
*/
static void
clear_remove(td)
struct thread *td;
{
struct pagedep_hashhead *pagedephd;
struct pagedep *pagedep;
static int next = 0;
struct mount *mp;
struct vnode *vp;
struct bufobj *bo;
int error, cnt;
ino_t ino;
mtx_assert(&lk, MA_OWNED);
for (cnt = 0; cnt < pagedep_hash; cnt++) {
pagedephd = &pagedep_hashtbl[next++];
if (next >= pagedep_hash)
next = 0;
LIST_FOREACH(pagedep, pagedephd, pd_hash) {
2007-04-04 07:29:53 +00:00
if (LIST_EMPTY(&pagedep->pd_dirremhd))
continue;
mp = pagedep->pd_list.wk_mp;
ino = pagedep->pd_ino;
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
if (vn_start_write(NULL, &mp, V_NOWAIT) != 0)
continue;
FREE_LOCK(&lk);
if ((error = ffs_vget(mp, ino, LK_EXCLUSIVE, &vp))) {
softdep_error("clear_remove: vget", error);
vn_finished_write(mp);
ACQUIRE_LOCK(&lk);
return;
}
if ((error = ffs_syncvnode(vp, MNT_NOWAIT)))
softdep_error("clear_remove: fsync", error);
bo = &vp->v_bufobj;
BO_LOCK(bo);
drain_output(vp);
BO_UNLOCK(bo);
vput(vp);
vn_finished_write(mp);
ACQUIRE_LOCK(&lk);
return;
}
}
}
/*
* Clear out a block of dirty inodes in an effort to reduce
* the number of inodedep dependency structures.
*/
static void
clear_inodedeps(td)
struct thread *td;
{
struct inodedep_hashhead *inodedephd;
struct inodedep *inodedep;
static int next = 0;
struct mount *mp;
struct vnode *vp;
struct fs *fs;
int error, cnt;
ino_t firstino, lastino, ino;
mtx_assert(&lk, MA_OWNED);
/*
* Pick a random inode dependency to be cleared.
* We will then gather up all the inodes in its block
* that have dependencies and flush them out.
*/
for (cnt = 0; cnt < inodedep_hash; cnt++) {
inodedephd = &inodedep_hashtbl[next++];
if (next >= inodedep_hash)
next = 0;
if ((inodedep = LIST_FIRST(inodedephd)) != NULL)
break;
}
if (inodedep == NULL)
return;
fs = inodedep->id_fs;
mp = inodedep->id_list.wk_mp;
/*
* Find the last inode in the block with dependencies.
*/
firstino = inodedep->id_ino & ~(INOPB(fs) - 1);
for (lastino = firstino + INOPB(fs) - 1; lastino > firstino; lastino--)
if (inodedep_lookup(mp, lastino, 0, &inodedep) != 0)
break;
/*
* Asynchronously push all but the last inode with dependencies.
* Synchronously push the last inode with dependencies to ensure
* that the inode block gets written to free up the inodedeps.
*/
for (ino = firstino; ino <= lastino; ino++) {
if (inodedep_lookup(mp, ino, 0, &inodedep) == 0)
continue;
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
if (vn_start_write(NULL, &mp, V_NOWAIT) != 0)
continue;
FREE_LOCK(&lk);
if ((error = ffs_vget(mp, ino, LK_EXCLUSIVE, &vp)) != 0) {
softdep_error("clear_inodedeps: vget", error);
vn_finished_write(mp);
ACQUIRE_LOCK(&lk);
return;
}
if (ino == lastino) {
if ((error = ffs_syncvnode(vp, MNT_WAIT)))
softdep_error("clear_inodedeps: fsync1", error);
} else {
if ((error = ffs_syncvnode(vp, MNT_NOWAIT)))
softdep_error("clear_inodedeps: fsync2", error);
BO_LOCK(&vp->v_bufobj);
drain_output(vp);
BO_UNLOCK(&vp->v_bufobj);
}
vput(vp);
vn_finished_write(mp);
ACQUIRE_LOCK(&lk);
}
}
/*
* Function to determine if the buffer has outstanding dependencies
* that will cause a roll-back if the buffer is written. If wantcount
* is set, return number of dependencies, otherwise just yes or no.
*/
static int
softdep_count_dependencies(bp, wantcount)
struct buf *bp;
int wantcount;
{
struct worklist *wk;
struct inodedep *inodedep;
struct indirdep *indirdep;
struct allocindir *aip;
struct pagedep *pagedep;
struct diradd *dap;
int i, retval;
retval = 0;
ACQUIRE_LOCK(&lk);
LIST_FOREACH(wk, &bp->b_dep, wk_list) {
switch (wk->wk_type) {
case D_INODEDEP:
inodedep = WK_INODEDEP(wk);
if ((inodedep->id_state & DEPCOMPLETE) == 0) {
/* bitmap allocation dependency */
retval += 1;
if (!wantcount)
goto out;
}
if (TAILQ_FIRST(&inodedep->id_inoupdt)) {
/* direct block pointer dependency */
retval += 1;
if (!wantcount)
goto out;
}
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (TAILQ_FIRST(&inodedep->id_extupdt)) {
/* direct block pointer dependency */
retval += 1;
if (!wantcount)
goto out;
}
continue;
case D_INDIRDEP:
indirdep = WK_INDIRDEP(wk);
2001-02-04 12:37:48 +00:00
LIST_FOREACH(aip, &indirdep->ir_deplisthd, ai_next) {
/* indirect block pointer dependency */
retval += 1;
if (!wantcount)
goto out;
}
continue;
case D_PAGEDEP:
pagedep = WK_PAGEDEP(wk);
for (i = 0; i < DAHASHSZ; i++) {
2001-02-04 12:37:48 +00:00
LIST_FOREACH(dap, &pagedep->pd_diraddhd[i], da_pdlist) {
/* directory entry dependency */
retval += 1;
if (!wantcount)
goto out;
}
}
continue;
case D_BMSAFEMAP:
case D_ALLOCDIRECT:
case D_ALLOCINDIR:
case D_MKDIR:
/* never a dependency on these blocks */
continue;
default:
panic("softdep_check_for_rollback: Unexpected type %s",
TYPENAME(wk->wk_type));
/* NOTREACHED */
}
}
out:
FREE_LOCK(&lk);
return retval;
}
/*
* Acquire exclusive access to a buffer.
* Must be called with a locked mtx parameter.
* Return acquired buffer or NULL on failure.
*/
static struct buf *
getdirtybuf(bp, mtx, waitfor)
struct buf *bp;
struct mtx *mtx;
int waitfor;
{
int error;
mtx_assert(mtx, MA_OWNED);
if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT, NULL) != 0) {
if (waitfor != MNT_WAIT)
return (NULL);
error = BUF_LOCK(bp,
LK_EXCLUSIVE | LK_SLEEPFAIL | LK_INTERLOCK, mtx);
/*
* Even if we sucessfully acquire bp here, we have dropped
* mtx, which may violates our guarantee.
*/
if (error == 0)
BUF_UNLOCK(bp);
else if (error != ENOLCK)
panic("getdirtybuf: inconsistent lock: %d", error);
mtx_lock(mtx);
return (NULL);
}
if ((bp->b_vflags & BV_BKGRDINPROG) != 0) {
if (mtx == &lk && waitfor == MNT_WAIT) {
mtx_unlock(mtx);
BO_LOCK(bp->b_bufobj);
BUF_UNLOCK(bp);
if ((bp->b_vflags & BV_BKGRDINPROG) != 0) {
bp->b_vflags |= BV_BKGRDWAIT;
msleep(&bp->b_xflags, BO_MTX(bp->b_bufobj),
PRIBIO | PDROP, "getbuf", 0);
} else
BO_UNLOCK(bp->b_bufobj);
mtx_lock(mtx);
return (NULL);
}
BUF_UNLOCK(bp);
if (waitfor != MNT_WAIT)
return (NULL);
/*
* The mtx argument must be bp->b_vp's mutex in
* this case.
*/
#ifdef DEBUG_VFS_LOCKS
if (bp->b_vp->v_type != VCHR)
ASSERT_BO_LOCKED(bp->b_bufobj);
#endif
bp->b_vflags |= BV_BKGRDWAIT;
msleep(&bp->b_xflags, mtx, PRIBIO, "getbuf", 0);
return (NULL);
}
if ((bp->b_flags & B_DELWRI) == 0) {
BUF_UNLOCK(bp);
return (NULL);
}
bremfree(bp);
return (bp);
}
/*
* Check if it is safe to suspend the file system now. On entry,
* the vnode interlock for devvp should be held. Return 0 with
* the mount interlock held if the file system can be suspended now,
* otherwise return EAGAIN with the mount interlock held.
*/
int
softdep_check_suspend(struct mount *mp,
struct vnode *devvp,
int softdep_deps,
int softdep_accdeps,
int secondary_writes,
int secondary_accwrites)
{
struct bufobj *bo;
struct ufsmount *ump;
int error;
ump = VFSTOUFS(mp);
bo = &devvp->v_bufobj;
ASSERT_BO_LOCKED(bo);
for (;;) {
if (!TRY_ACQUIRE_LOCK(&lk)) {
BO_UNLOCK(bo);
ACQUIRE_LOCK(&lk);
FREE_LOCK(&lk);
BO_LOCK(bo);
continue;
}
MNT_ILOCK(mp);
if (mp->mnt_secondary_writes != 0) {
FREE_LOCK(&lk);
BO_UNLOCK(bo);
msleep(&mp->mnt_secondary_writes,
MNT_MTX(mp),
(PUSER - 1) | PDROP, "secwr", 0);
BO_LOCK(bo);
continue;
}
break;
}
/*
* Reasons for needing more work before suspend:
* - Dirty buffers on devvp.
* - Softdep activity occurred after start of vnode sync loop
* - Secondary writes occurred after start of vnode sync loop
*/
error = 0;
if (bo->bo_numoutput > 0 ||
bo->bo_dirty.bv_cnt > 0 ||
softdep_deps != 0 ||
ump->softdep_deps != 0 ||
softdep_accdeps != ump->softdep_accdeps ||
secondary_writes != 0 ||
mp->mnt_secondary_writes != 0 ||
secondary_accwrites != mp->mnt_secondary_accwrites)
error = EAGAIN;
FREE_LOCK(&lk);
BO_UNLOCK(bo);
return (error);
}
/*
* Get the number of dependency structures for the file system, both
* the current number and the total number allocated. These will
* later be used to detect that softdep processing has occurred.
*/
void
softdep_get_depcounts(struct mount *mp,
int *softdep_depsp,
int *softdep_accdepsp)
{
struct ufsmount *ump;
ump = VFSTOUFS(mp);
ACQUIRE_LOCK(&lk);
*softdep_depsp = ump->softdep_deps;
*softdep_accdepsp = ump->softdep_accdeps;
FREE_LOCK(&lk);
}
/*
* Wait for pending output on a vnode to complete.
* Must be called with vnode lock and interlock locked.
Move UFS from DEVFS backing to GEOM backing. This eliminates a bunch of vnode overhead (approx 1-2 % speed improvement) and gives us more control over the access to the storage device. Access counts on the underlying device are not correctly tracked and therefore it is possible to read-only mount the same disk device multiple times: syv# mount -p /dev/md0 /var ufs rw 2 2 /dev/ad0 /mnt ufs ro 1 1 /dev/ad0 /mnt2 ufs ro 1 1 /dev/ad0 /mnt3 ufs ro 1 1 Since UFS/FFS is not a synchrousely consistent filesystem (ie: it caches things in RAM) this is not possible with read-write mounts, and the system will correctly reject this. Details: Add a geom consumer and a bufobj pointer to ufsmount. Eliminate the vnode argument from softdep_disk_prewrite(). Pick the vnode out of bp->b_vp for now. Eventually we should find it through bp->b_bufobj->b_private. In the mountcode, use g_vfs_open() once we have used VOP_ACCESS() to check permissions. When upgrading and downgrading between r/o and r/w do the right thing with GEOM access counts. Remove all the workarounds for not being able to do this with VOP_OPEN(). If we are the root mount, drop the exclusive access count until we upgrade to r/w. This allows fsck of the root filesystem and the MNT_RELOAD to work correctly. Set bo_private to the GEOM consumer on the device bufobj. Change the ffs_ops->strategy function to call g_vfs_strategy() In ufs_strategy() directly call the strategy on the disk bufobj. Same in rawread. In ffs_fsync() we will no longer see VCHR device nodes, so remove code which synced the filesystem mounted on it, in case we came there. I'm not sure this code made sense in the first place since we would have taken the specfs route on such a vnode. Redo the highly bogus readblock() function in the snapshot code to something slightly less bogus: Constructing an uio and using physio was really quite a detour. Instead just fill in a bio and ship it down.
2004-10-29 10:15:56 +00:00
*
* XXX: Should just be a call to bufobj_wwait().
*/
static void
drain_output(vp)
struct vnode *vp;
{
struct bufobj *bo;
bo = &vp->v_bufobj;
ASSERT_VOP_LOCKED(vp, "drain_output");
ASSERT_BO_LOCKED(bo);
while (bo->bo_numoutput) {
bo->bo_flag |= BO_WWAIT;
msleep((caddr_t)&bo->bo_numoutput,
BO_MTX(bo), PRIBIO + 1, "drainvp", 0);
}
}
/*
* Called whenever a buffer that is being invalidated or reallocated
* contains dependencies. This should only happen if an I/O error has
* occurred. The routine is called with the buffer locked.
*/
static void
softdep_deallocate_dependencies(bp)
struct buf *bp;
{
if ((bp->b_ioflags & BIO_ERROR) == 0)
panic("softdep_deallocate_dependencies: dangling deps");
softdep_error(bp->b_vp->v_mount->mnt_stat.f_mntonname, bp->b_error);
panic("softdep_deallocate_dependencies: unrecovered I/O error");
}
/*
* Function to handle asynchronous write errors in the filesystem.
*/
static void
softdep_error(func, error)
char *func;
int error;
{
/* XXX should do something better! */
printf("%s: got error %d while accessing filesystem\n", func, error);
}
#endif /* SOFTUPDATES */