freebsd-skq/etc/snmpd.config

# $FreeBSD$
#
# Example configuration file for bsnmpd(1).
#

#
# Set some common variables
#
location := "Room 200"
contact := "sysmeister@example.com"
system := 1	# FreeBSD
traphost := localhost
trapport := 162

#
# Set the SNMP engine ID.
#
# The snmpEngineID object required from the SNMPv3 Framework. If not explicitly set via
# this configuration file, an ID is assigned based on the value of the
# kern.hostid variable
# engine := 0x80:0x10:0x08:0x10:0x80:0x25
# snmpEngineID = $(engine)

# Change this!
read := "public"
# Uncomment begemotSnmpdCommunityString.0.2 below that sets the community
# string to enable write access.
write := "geheim"
trap := "mytrap"

#
# Declarations for SNMP-USER-BASED-SM-MIB authentication and privacy options
#

NoAuthProtocol		:= 1.3.6.1.6.3.10.1.1.1
HMACMD5AuthProtocol	:= 1.3.6.1.6.3.10.1.1.2
HMACSHAAuthProtocol	:= 1.3.6.1.6.3.10.1.1.3
NoPrivProtocol		:= 1.3.6.1.6.3.10.1.2.1
DESPrivProtocol		:= 1.3.6.1.6.3.10.1.2.2
AesCfb128Protocol	:= 1.3.6.1.6.3.10.1.2.4

#
# Enumerations from SNMP-FRAMEWORK-MIB
#

# Security models
securityModelAny	:= 0
securityModelSNMPv1	:= 1
securityModelSNMPv2c	:= 2
securityModelUSM	:= 3

# Message Processing models
MPmodelSNMPv1		:= 0
MPmodelSNMPv2c		:= 1
MPmodelSNMPv3		:= 3

# Security levels
noAuthNoPriv := 1
authNoPriv := 2
authPriv := 3


# SNMPv3 USM User definition
#
# The localized hex password for a user may be obtained by setting SNMPUSER, SNMPPASSWD,
# SNMPAUTH and SNMPPRIV environment variables to the desired parameters and invoking
# 'bsnmpget -v 3 -D -K -o verbose' against the running bsnmpd(1). For other
# usages refer to the bsnmpget(1) manual page. The following lines define a user "bsnmp"
# with a private password "bsnmptest", localized for the above engine ID.
#
#user1 := "bsnmp"
#user1passwd := 0x22:0x98:0x1a:0x6e:0x39:0x93:0x16:0x5e:0x6a:0x21:0x1b:0xd8:0xa9:0x81:0x31:0x05:0x16:0x33:0x38:0x60

#
# Configuration
#
%snmpd
begemotSnmpdDebugDumpPdus	= 2
begemotSnmpdDebugSyslogPri	= 7

#
# Set the read and write communities.
#
# The default value of the community strings is NULL (note, that this is
# different from the empty string). This disables both read and write access.
# To enable read access only the read community string must be set. Setting
# the write community string enables both read and write access with that
# string.
#
# Be sure to understand the security implications of SNMPv2 - the community
# strings are readable on the wire!
#
begemotSnmpdCommunityString.0.1	= $(read)
# begemotSnmpdCommunityString.0.2	= $(write)
begemotSnmpdCommunityDisable	= 1

# open standard SNMP ports
begemotSnmpdPortStatus.0.0.0.0.161 = 1

# open a unix domain socket
begemotSnmpdLocalPortStatus."/var/run/snmpd.sock" = 1
begemotSnmpdLocalPortType."/var/run/snmpd.sock" = 4

# send traps to the traphost
begemotTrapSinkStatus.[$(traphost)].$(trapport) = 4
begemotTrapSinkVersion.[$(traphost)].$(trapport) = 2
begemotTrapSinkComm.[$(traphost)].$(trapport) = $(trap)

sysContact	= $(contact)
sysLocation	= $(location)
sysObjectId 	= 1.3.6.1.4.1.12325.1.1.2.1.$(system)

snmpEnableAuthenTraps = 2

# Uncomment `begemotSnmpdModulePath.".." = ".."' entries below to enable
# modules

#
# Control configuration for the modules in the module specific sections, e.g.
# the "usm" module (begemotSnmpdModulePath."usm") can be controlled in the
# %usm specific section. You must uncomment the section specific header in
# order to use the enclosed variables, e.g. `usmUserStatus.$(engine).$(user1)`
# can only be used if %usm is uncommented.
#
# Modules are loaded in the order listed, so they must be before any
# dependent modules, e.g. "mibII" vs "bridge".
#

#
# MIB-2 module
#
begemotSnmpdModulePath."mibII"	= "/usr/lib/snmp_mibII.so"

#
# Bridge module
#  This requires the mibII module.
#
#begemotSnmpdModulePath."bridge" = "/usr/lib/snmp_bridge.so"

#
# Host resources module
#  This requires the mibII module.
#
#begemotSnmpdModulePath."hostres" = "/usr/lib/snmp_hostres.so"

#
# LM75 Sensor module
#
#begemotSnmpdModulePath."lm75" = "/usr/lib/snmp_lm75.so"

#
# Netgraph module
#
#begemotSnmpdModulePath."netgraph" = "/usr/lib/snmp_netgraph.so"

#
# pf(4) module
#
#begemotSnmpdModulePath."pf"	= "/usr/lib/snmp_pf.so"

#
# SNMPv3 Notification Targets
#
# begemotSnmpdModulePath."target"	= "/usr/lib/snmp_target.so"

#
# SNMPv3 User-based security module - must be loaded for SNMPv3 USM
#
#begemotSnmpdModulePath."usm"	= "/usr/lib/snmp_usm.so"

#
# SNMPv3 View-based Access Control module
#
#begemotSnmpdModulePath."vacm"	= "/usr/lib/snmp_vacm.so"

#
# Wireless module
#  This requires the mibII module.
#
#begemotSnmpdModulePath."wlan" = "/usr/lib/snmp_wlan.so"

#
# SNMPv3 USM User definition.
#

#%usm

#
# The following block creates a user with name "bsnmp" and sets privacy
# and encryption options to SHA256 message digests and AES encryption
# for this user.
#
# usmUserStatus.$(engine).$(user1) = 5
# usmUserAuthProtocol.$(engine).$(user1) = $(HMACSHAAuthProtocol)
# usmUserAuthKeyChange.$(engine).$(user1) = $(user1passwd)
# usmUserPrivProtocol.$(engine).$(user1) = $(AesCfb128Protocol)
# usmUserPrivKeyChange.$(engine).$(user1) = $(user1passwd)
# usmUserStatus.$(engine).$(user1) = 1
#

#
# The following block creates a user with name "public" with no authentication
# or encryption options.
#
# usmUserStatus.$(engine).$(read) = 5
# usmUserAuthProtocol.$(engine).$(read) = $(NoAuthProtocol)
# usmUserPrivProtocol.$(engine).$(read) = $(NoPrivProtocol)
# usmUserStatus.$(engine).$(read) = 1
#

#
# Definition of view-based access control entries.
#
#%vacm

# Definition of a SNMPv1 group
# vacmSecurityToGroupStatus.$(securityModelSNMPv1).$(read) = 4
# vacmGroupName.$(securityModelSNMPv1).$(read) = $(read)

# Definition of SNMPv2 group
# vacmSecurityToGroupStatus.$(securityModelSNMPv2c).$(write) = 4
# vacmGroupName.$(securityModelSNMPv2c).$(write) = $(write)

# Definition of SNMPv3 group with users "bsnmp" and "public"
# vacmSecurityToGroupStatus.$(securityModelUSM).$(user1) = 4
# vacmGroupName.$(securityModelUSM).$(user1) = $(write)
# vacmSecurityToGroupStatus.$(securityModelUSM).$(read) = 4
# vacmGroupName.$(securityModelUSM).$(read) = $(write)

#
# The OID of the .iso.org.dod.internet subtree
#
# internetoid := 1.3.6.1
# internetoidlen := 4

#
# Definitions of two views
#
# vacmViewTreeFamilyStatus."internet".$(internetoidlen).$(internetoid) = 4
# vacmViewTreeFamilyStatus."restricted".$(internetoidlen).$(internetoid) = 4

#
# Access control
#

#
# Read-only access for SNMPv1 users
#
# vacmAccessStatus.$(read)."".$(securityModelSNMPv1).$(noAuthNoPriv) = 4
# vacmAccessReadViewName.$(read)."".$(securityModelSNMPv1).$(noAuthNoPriv) = "internet"

#
# Read-write access for SNMPv2 users
#
# vacmAccessStatus.$(write)."".$(securityModelSNMPv2c).$(noAuthNoPriv) = 4
# vacmAccessReadViewName.$(write)."".$(securityModelSNMPv2c).$(noAuthNoPriv) = "internet"
# vacmAccessWriteViewName.$(write)."".$(securityModelSNMPv2c).$(noAuthNoPriv) = "internet"

#
# Read-write-notify access for SNMPv3 USM users with noAuthNoPriv
#
# vacmAccessStatus.$(write)."".3.$(noAuthNoPriv) = 4
# vacmAccessReadViewName.$(write)."".$(securityModelUSM).$(noAuthNoPriv) = "internet"
# vacmAccessWriteViewName.$(write)."".$(securityModelUSM).$(noAuthNoPriv) = "internet"
# vacmAccessNotifyViewName.$(write)."".$(securityModelUSM).$(noAuthNoPriv) = "internet"

#
#Read-write-notify access to restricted for SNMPv3 USM users with authPriv
#
# vacmAccessStatus.$(write)."".$(securityModelUSM).$(authPriv) = 4
# vacmAccessReadViewName.$(write)."".$(securityModelUSM).$(authPriv) = "restricted"
# vacmAccessWriteViewName.$(write)."".$(securityModelUSM).$(authPriv) = "restricted"
# vacmAccessNotifyViewName.$(write)."".$(securityModelUSM).$(authPriv) = "restricted"

#%target
# Send notifications to target tag "test"
# tag		:= "test"
# snmpNotifyRowStatus.$(tag) = 4
# snmpNotifyTag.$(tag) = $(tag)

# tagremote		:= "testremote"
# snmpNotifyRowStatus.$(tagremote) = 4
# snmpNotifyTag.$(tagremote) = $(tagremote)

#
# Specify the target parameters for the notifications - send with the credentials
# of user "bsnmp"
#
# snmpTargetParamsRowStatus.$(tag) = 5
# snmpTargetParamsMPModel.$(tag) = $(MPmodelSNMPv3)
# snmpTargetParamsSecurityModel.$(tag) = $(securityModelUSM)
# snmpTargetParamsSecurityName.$(tag) = $(user1)
# snmpTargetParamsSecurityLevel.$(tag) = $(authPriv)
# snmpTargetParamsRowStatus.$(tag) = 1

#
# Define the notifications' target address - port 162 on localhost
#
# snmpTargetAddrRowStatus.$(tag) = 5
# snmpTargetAddrTAddress.$(tag) = 0x7f:0x0:0x0:0x1:0x0:0xa2
# snmpTargetAddrTagList.$(tag) = "test notification"
# snmpTargetAddrParams.$(tag) = $(tag)
# snmpTargetAddrRowStatus.$(tag) = 1

#
# Define the notifications' target address - port 162 on 10.0.0.1
#
# snmpTargetAddrRowStatus.$(tagremote) = 5
# snmpTargetAddrTAddress.$(tagremote) = 0x0a:0x00:0x00:0x1:0x0:0xa2
# snmpTargetAddrTagList.$(tagremote) = $(tagremote)
# snmpTargetAddrParams.$(tagremote) = $(tag)
# snmpTargetAddrRowStatus.$(tagremote) = 1

# Force a polling rate for the 64-bit interface counters in case
# the automatic computation is wrong (which may be the case if an interface
# announces the wrong bit rate via its MIB).
#%mibII
#begemotIfForcePoll = 2000

#%netgraph
#begemotNgControlNodeName = "snmpd"