freebsd-skq/lib/libusb/libusb20_int.h

239 lines
8.1 KiB
C
Raw Normal View History

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* $FreeBSD$ */
/*-
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* This file describes internal structures.
*/
#ifndef _LIBUSB20_INT_H_
#define _LIBUSB20_INT_H_
#ifdef COMPAT_32BIT
#define libusb20_pass_ptr(ptr) ((uint64_t)(uintptr_t)(ptr))
#else
#define libusb20_pass_ptr(ptr) (ptr)
#endif
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
struct libusb20_device;
struct libusb20_backend;
struct libusb20_transfer;
struct libusb20_quirk;
union libusb20_session_data {
unsigned long session_data;
struct timespec tv;
uint32_t plugtime;
};
/* USB backend specific */
typedef const char *(libusb20_get_backend_name_t)(void);
typedef int (libusb20_root_get_dev_quirk_t)(struct libusb20_backend *pbe, uint16_t index, struct libusb20_quirk *pq);
typedef int (libusb20_root_get_quirk_name_t)(struct libusb20_backend *pbe, uint16_t index, struct libusb20_quirk *pq);
typedef int (libusb20_root_add_dev_quirk_t)(struct libusb20_backend *pbe, struct libusb20_quirk *pq);
typedef int (libusb20_root_remove_dev_quirk_t)(struct libusb20_backend *pbe, struct libusb20_quirk *pq);
typedef int (libusb20_close_device_t)(struct libusb20_device *pdev);
typedef int (libusb20_dev_get_info_t)(struct libusb20_device *pdev, struct usb_device_info *pinfo);
typedef int (libusb20_dev_get_iface_desc_t)(struct libusb20_device *pdev, uint8_t iface_index, char *buf, uint8_t len);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
typedef int (libusb20_init_backend_t)(struct libusb20_backend *pbe);
typedef int (libusb20_open_device_t)(struct libusb20_device *pdev, uint16_t transfer_count_max);
typedef void (libusb20_exit_backend_t)(struct libusb20_backend *pbe);
typedef int (libusb20_root_set_template_t)(struct libusb20_backend *pbe, int temp);
typedef int (libusb20_root_get_template_t)(struct libusb20_backend *pbe, int *ptemp);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
#define LIBUSB20_DEFINE(n,field) \
libusb20_##field##_t *field;
#define LIBUSB20_DECLARE(n,field) \
/* .field = */ n##_##field,
#define LIBUSB20_BACKEND(m,n) \
/* description of this backend */ \
m(n, get_backend_name) \
/* optional backend methods */ \
m(n, init_backend) \
m(n, exit_backend) \
m(n, dev_get_info) \
m(n, dev_get_iface_desc) \
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
m(n, root_get_dev_quirk) \
m(n, root_get_quirk_name) \
m(n, root_add_dev_quirk) \
m(n, root_remove_dev_quirk) \
m(n, root_set_template) \
m(n, root_get_template) \
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* mandatory device methods */ \
m(n, open_device) \
m(n, close_device) \
struct libusb20_backend_methods {
LIBUSB20_BACKEND(LIBUSB20_DEFINE,)
};
/* USB dummy methods */
typedef int (libusb20_dummy_int_t)(void);
typedef void (libusb20_dummy_void_t)(void);
/* USB device specific */
typedef int (libusb20_detach_kernel_driver_t)(struct libusb20_device *pdev, uint8_t iface_index);
typedef int (libusb20_do_request_sync_t)(struct libusb20_device *pdev, struct LIBUSB20_CONTROL_SETUP_DECODED *setup, void *data, uint16_t *pactlen, uint32_t timeout, uint8_t flags);
typedef int (libusb20_get_config_desc_full_t)(struct libusb20_device *pdev, uint8_t **ppbuf, uint16_t *plen, uint8_t index);
typedef int (libusb20_get_config_index_t)(struct libusb20_device *pdev, uint8_t *pindex);
typedef int (libusb20_kernel_driver_active_t)(struct libusb20_device *pdev, uint8_t iface_index);
typedef int (libusb20_process_t)(struct libusb20_device *pdev);
typedef int (libusb20_reset_device_t)(struct libusb20_device *pdev);
typedef int (libusb20_set_power_mode_t)(struct libusb20_device *pdev, uint8_t power_mode);
typedef int (libusb20_get_power_mode_t)(struct libusb20_device *pdev, uint8_t *power_mode);
typedef int (libusb20_set_alt_index_t)(struct libusb20_device *pdev, uint8_t iface_index, uint8_t alt_index);
typedef int (libusb20_set_config_index_t)(struct libusb20_device *pdev, uint8_t index);
typedef int (libusb20_check_connected_t)(struct libusb20_device *pdev);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* USB transfer specific */
typedef int (libusb20_tr_open_t)(struct libusb20_transfer *xfer, uint32_t MaxBufSize, uint32_t MaxFrameCount, uint8_t ep_no, uint16_t stream_id, uint8_t pre_scale);
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
typedef int (libusb20_tr_close_t)(struct libusb20_transfer *xfer);
typedef int (libusb20_tr_clear_stall_sync_t)(struct libusb20_transfer *xfer);
typedef void (libusb20_tr_submit_t)(struct libusb20_transfer *xfer);
typedef void (libusb20_tr_cancel_async_t)(struct libusb20_transfer *xfer);
#define LIBUSB20_DEVICE(m,n) \
m(n, detach_kernel_driver) \
m(n, do_request_sync) \
m(n, get_config_desc_full) \
m(n, get_config_index) \
m(n, kernel_driver_active) \
m(n, process) \
m(n, reset_device) \
m(n, check_connected) \
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
m(n, set_power_mode) \
m(n, get_power_mode) \
m(n, set_alt_index) \
m(n, set_config_index) \
m(n, tr_cancel_async) \
m(n, tr_clear_stall_sync) \
m(n, tr_close) \
m(n, tr_open) \
m(n, tr_submit) \
struct libusb20_device_methods {
LIBUSB20_DEVICE(LIBUSB20_DEFINE,)
};
struct libusb20_backend {
TAILQ_HEAD(, libusb20_device) usb_devs;
const struct libusb20_backend_methods *methods;
};
struct libusb20_transfer {
struct libusb20_device *pdev; /* the USB device we belong to */
libusb20_tr_callback_t *callback;
void *priv_sc0; /* private client data */
void *priv_sc1; /* private client data */
/*
* Pointer to a list of buffer pointers:
*/
#ifdef COMPAT_32BIT
uint64_t *ppBuffer;
#else
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
void **ppBuffer;
#endif
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/*
* Pointer to frame lengths, which are updated to actual length
* after the USB transfer completes:
*/
uint32_t *pLength;
uint32_t maxTotalLength;
uint32_t maxFrames; /* total number of frames */
uint32_t nFrames; /* total number of frames */
uint32_t aFrames; /* actual number of frames */
uint32_t timeout;
/* isochronous completion time in milliseconds */
uint16_t timeComplete;
uint16_t trIndex;
uint16_t maxPacketLen;
uint8_t flags; /* see LIBUSB20_TRANSFER_XXX */
uint8_t status; /* see LIBUSB20_TRANSFER_XXX */
uint8_t is_opened;
uint8_t is_pending;
uint8_t is_cancel;
uint8_t is_draining;
uint8_t is_restart;
};
struct libusb20_device {
/* device descriptor */
struct LIBUSB20_DEVICE_DESC_DECODED ddesc;
/* device timestamp */
union libusb20_session_data session_data;
/* our device entry */
TAILQ_ENTRY(libusb20_device) dev_entry;
/* device methods */
const struct libusb20_device_methods *methods;
/* backend methods */
const struct libusb20_backend_methods *beMethods;
/* list of USB transfers */
struct libusb20_transfer *pTransfer;
/* private backend data */
void *privBeData;
/* libUSB v0.1 and v1.0 compat data */
void *privLuData;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* claimed interface */
uint8_t claimed_interface;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
/* device file handle */
int file;
/* device file handle (control transfers only) */
int file_ctrl;
/* debugging level */
int debug;
/* number of USB transfers */
uint16_t nTransfer;
uint8_t bus_number;
uint8_t device_address;
uint8_t usb_mode;
uint8_t usb_speed;
uint8_t is_opened;
uint8_t parent_address;
uint8_t parent_port;
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety. This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API: 1) A brief feature list: - A new and mutex enabled USB API. - Many USB drivers are now running Giant free. - Linux USB kernel compatibility layer. - New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge. - New "usbconfig" utility, for easy configuration of USB. - Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB. - Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example. - Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff. - Safer parsing of USB descriptors. - Autodetect of annoying USB install disks. - Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side. - Support for USB transfers like I/O vectors, means more throughput and less interrupts. - ... see the FreeBSD quarterly status reports under "USB project" 2) To enable the driver in the default kernel build: 2.a) Remove all existing USB device options from your kernel config file. 2.b) Add the following USB device options to your kernel configuration file: # USB core support device usb2_core # USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci # USB mass storage support device usb2_storage device usb2_storage_mass # USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav # USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd # USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom # USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng # USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms # USB sound and MIDI device support device usb2_sound 2) To enable the driver at runtime: 2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel. 2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option. Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
char usb_desc[96];
};
extern const struct libusb20_backend_methods libusb20_ugen20_backend;
extern const struct libusb20_backend_methods libusb20_linux_backend;
#endif /* _LIBUSB20_INT_H_ */