freebsd-skq/sys/arm/conf/AML8726

#
# Kernel configuration for Amlogic aml8726 boards.
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD$

ident		AML8726

include 	"std.armv6"
include 	"../amlogic/aml8726/std.aml8726"

options 	SCHED_ULE		# ULE scheduler
options 	PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
options 	LINUX_BOOT_ABI

# NFS root from boopt/dhcp
#options 	BOOTP
#options 	BOOTP_NFSROOT
#options 	BOOTP_COMPAT
#options 	BOOTP_NFSV3
#options 	BOOTP_WIRED_TO=axe0

# Interrupt controller
device		aml_pic

# MMC/SD/SDIO Card slot support
device		mmc			# mmc/sd bus
device		mmcsd			# mmc/sd flash cards

# Boot device is 2nd slice on MMC/SD card
options 	ROOTDEVNAME=\"ufs:mmcsd0s2\"

device		pl310			# PL310 L2 cache controller

# GPIO
device		gpio
device		gpioled

# I2C support
device		iicbus
device		iicbb
device		iic

# vt is the default console driver, resembling an SCO console
device		vt
#device		kbdmux

# Serial (COM) ports
device		uart			# Generic UART driver

# Pseudo devices.
device		loop			# Network loopback
device		random			# Entropy device
device		ether			# Ethernet support
device		pty			# BSD-style compatibility pseudo ttys

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf			# Berkeley packet filter

# USB support
device		usb			# General USB code (mandatory for USB)
device		dwcotg			# DWC OTG controller
options 	USB_HOST_ALIGN=64	# Align usb buffers to cache line size.

#device		ukbd			# USB keyboard
#device		ums			# USB mouse

device		scbus			# SCSI bus (required for ATA/SCSI)
device		da			# Direct Access (disks)
device		umass			# Disks/Mass storage - Requires scbus and da

# Ethernet support
device		miibus			# MII bus support

# SoC Ethernet, requires miibus
device		dwc

# USB Ethernet support, requires miibus
device		axe			# ASIX Electronics USB Ethernet

# Flattened Device Tree
options 	FDT			# Configure using FDT/DTB data
Pull out the common parts of the ODROIDC1 and VSATV102 kernels to a new kernel config. This also removes the per-board config files from universe. 2015-04-23 21:31:06 +00:00			`#`
			`# Kernel configuration for Amlogic aml8726 boards.`
			`#`
			`# For more information on this file, please read the config(5) manual page,`
			`# and/or the handbook section on Kernel Configuration Files:`
			`#`
			`# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html`
			`#`
			`# The handbook is also available locally in /usr/share/doc/handbook`
			`# if you've installed the doc distribution, otherwise always see the`
			`# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the`
			`# latest information.`
			`#`
			`# An exhaustive list of options and more detailed explanations of the`
			`# device lines is also present in the ../../conf/NOTES and NOTES files.`
			`# If you are in doubt as to the purpose or necessity of a line, check first`
			`# in NOTES.`
			`#`
			`# $FreeBSD$`

			`ident AML8726`
Create std.arm and std.armv6 config files and include the right one from each of the existing kernel configs. This gives a place to put config that applies to the entire arch. Add the ARM_NEW_PMAP option to std.armv6. This is working well in early testing and it's time for wide exposure, but it's still nice to be able to fall back to the old implementation for testing when a problem comes along. Eventually the option and the old implementation will go away. The opportunity now exists to move a whole lot of boilerplate from all the arm kernel config files into std.arm*, but that's a commit for another day. 2015-05-05 16:09:25 +00:00
Clean up the ARM kernel configs to use 'include<space><tab>"file"'. 2015-05-07 12:38:23 +00:00			`include "std.armv6"`
Pull out the common parts of the ODROIDC1 and VSATV102 kernels to a new kernel config. This also removes the per-board config files from universe. 2015-04-23 21:31:06 +00:00			`include "../amlogic/aml8726/std.aml8726"`

			`options SCHED_ULE # ULE scheduler`
			`options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.`
			`options LINUX_BOOT_ABI`

			`# NFS root from boopt/dhcp`
			`#options BOOTP`
			`#options BOOTP_NFSROOT`
			`#options BOOTP_COMPAT`
			`#options BOOTP_NFSV3`
			`#options BOOTP_WIRED_TO=axe0`

Clean up the Amlogic interrupt controller driver to handle the case where we have both the Amlogic pic and a GIC. This may be the case in some configurations. Differential Revision: https://reviews.freebsd.org/D2432 Submitted by: John Wehle <john@feith.com> 2015-05-18 11:04:07 +00:00			`# Interrupt controller`
			`device aml_pic`

Pull out the common parts of the ODROIDC1 and VSATV102 kernels to a new kernel config. This also removes the per-board config files from universe. 2015-04-23 21:31:06 +00:00			`# MMC/SD/SDIO Card slot support`
			`device mmc # mmc/sd bus`
			`device mmcsd # mmc/sd flash cards`

			`# Boot device is 2nd slice on MMC/SD card`
			`options ROOTDEVNAME=\"ufs:mmcsd0s2\"`

Remove pl310.c from the SoC std.* files, it's in files.arm Sponsored by: ABT Systems Ltd 2015-11-20 16:43:21 +00:00			`device pl310 # PL310 L2 cache controller`

Pull out the common parts of the ODROIDC1 and VSATV102 kernels to a new kernel config. This also removes the per-board config files from universe. 2015-04-23 21:31:06 +00:00			`# GPIO`
			`device gpio`
			`device gpioled`

			`# I2C support`
			`device iicbus`
			`device iicbb`
			`device iic`

			`# vt is the default console driver, resembling an SCO console`
			`device vt`
			`#device kbdmux`

			`# Serial (COM) ports`
			`device uart # Generic UART driver`

			`# Pseudo devices.`
			`device loop # Network loopback`
			`device random # Entropy device`
			`device ether # Ethernet support`
			`device pty # BSD-style compatibility pseudo ttys`

			# The `bpf' device enables the Berkeley Packet Filter.
			`# Be aware of the administrative consequences of enabling this!`
			`# Note that 'bpf' is required for DHCP.`
			`device bpf # Berkeley packet filter`

			`# USB support`
			`device usb # General USB code (mandatory for USB)`
			`device dwcotg # DWC OTG controller`
			`options USB_HOST_ALIGN=64 # Align usb buffers to cache line size.`

			`#device ukbd # USB keyboard`
			`#device ums # USB mouse`

			`device scbus # SCSI bus (required for ATA/SCSI)`
			`device da # Direct Access (disks)`
			`device umass # Disks/Mass storage - Requires scbus and da`

			`# Ethernet support`
			`device miibus # MII bus support`

			`# SoC Ethernet, requires miibus`
			`device dwc`

			`# USB Ethernet support, requires miibus`
			`device axe # ASIX Electronics USB Ethernet`

			`# Flattened Device Tree`
			`options FDT # Configure using FDT/DTB data`