d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ad2e4c2a65
freebsd-skq/sys/arm/conf/DB-78XXX

88 lines
1.7 KiB
Plaintext
Raw Normal View History

Add kernel config files for Marvell development boards. FreeBSD 8-CURRENT was tested and run successfully on the following eval boards and devices : * DB-88F5182, DB-88F5281 (Orion based) * DB-88F6281, RD-88F6281 (Kirkwood based) * DB-78100 (Discovery based) For more detailed info on build instructions and other examples please refer to http://wiki.freebsd.org/FreeBSDMarvell Obtained from: Marvell, Semihalf
2008-10-14 08:18:27 +00:00
#
# Custom kernel for Marvell DB-78xx boards.
#
# $FreeBSD$
#
ident DB-88F78XX
Clean up the ARM kernel configs to use 'include<space><tab>"file"'.
2015-05-07 12:38:23 +00:00
include "std.arm"
include "../mv/discovery/std.db78xxx"
Add kernel config files for Marvell development boards. FreeBSD 8-CURRENT was tested and run successfully on the following eval boards and devices : * DB-88F5182, DB-88F5281 (Orion based) * DB-88F6281, RD-88F6281 (Kirkwood based) * DB-78100 (Discovery based) For more detailed info on build instructions and other examples please refer to http://wiki.freebsd.org/FreeBSDMarvell Obtained from: Marvell, Semihalf
2008-10-14 08:18:27 +00:00
- Use "device\t" and "options \t" for consistency.
2009-05-10 00:00:25 +00:00
options SOC_MV_DISCOVERY
Add kernel config files for Marvell development boards. FreeBSD 8-CURRENT was tested and run successfully on the following eval boards and devices : * DB-88F5182, DB-88F5281 (Orion based) * DB-88F6281, RD-88F6281 (Kirkwood based) * DB-78100 (Discovery based) For more detailed info on build instructions and other examples please refer to http://wiki.freebsd.org/FreeBSDMarvell Obtained from: Marvell, Semihalf
2008-10-14 08:18:27 +00:00
makeoptions WERROR="-Werror"
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
options INET6 # IPv6 communications protocols
In the TCP stack, the hhook(9) framework provides hooks for kernel modules to add actions that run when a TCP frame is sent or received on a TCP session in the ESTABLISHED state. In the base tree, this functionality is only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd, and cc_vegas congestion control modules. Presently, we incur overhead to check for hooks each time a TCP frame is sent or received on an ESTABLISHED TCP session. This change adds a new compile-time option (TCP_HHOOK) to determine whether to include the hhook(9) framework for TCP. To retain backwards compatibility, I added the TCP_HHOOK option to every configuration file that already defined "options INET". (Therefore, this patch introduces no functional change. In order to see a functional difference, you need to compile a custom kernel without the TCP_HHOOK option.) This change will allow users to easily exclude this functionality from their kernel, should they wish to do so. Note that any users who use a custom kernel configuration and use one of the congestion control modules listed above will need to add the TCP_HHOOK option to their kernel configuration. Reviewed by: rrs, lstewart, hiren (previous version), sjg (makefiles only) Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D8185
2016-10-12 02:16:42 +00:00
options TCP_HHOOK # hhook(9) framework for TCP
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
options GEOM_PART_BSD # BSD partition scheme
options GEOM_PART_MBR # MBR partition scheme
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options TMPFS # Efficient memory filesystem
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
options FFS # Berkeley Fast Filesystem
options NANDFS # NAND Filesystem
Remove "New" label from NFSCL/NFSD now that they are the only NFS client/server. While here, remove duplicate NFSCL from sys/conf/NOTES. Approved by: rmacklem
2015-01-06 16:15:57 +00:00
options NFSCL # Network Filesystem Client
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCL
- Use "device\t" and "options \t" for consistency.
2009-05-10 00:00:25 +00:00
options BOOTP
options BOOTP_NFSROOT
options BOOTP_NFSV3
options BOOTP_WIRED_TO=mge0
Add kernel config files for Marvell development boards. FreeBSD 8-CURRENT was tested and run successfully on the following eval boards and devices : * DB-88F5182, DB-88F5281 (Orion based) * DB-88F6281, RD-88F6281 (Kirkwood based) * DB-78100 (Discovery based) For more detailed info on build instructions and other examples please refer to http://wiki.freebsd.org/FreeBSDMarvell Obtained from: Marvell, Semihalf
2008-10-14 08:18:27 +00:00
- Use "device\t" and "options \t" for consistency.
2009-05-10 00:00:25 +00:00
#options ROOTDEVNAME=\"ufs:/dev/da0a\"
Add kernel config files for Marvell development boards. FreeBSD 8-CURRENT was tested and run successfully on the following eval boards and devices : * DB-88F5182, DB-88F5281 (Orion based) * DB-88F6281, RD-88F6281 (Kirkwood based) * DB-78100 (Discovery based) For more detailed info on build instructions and other examples please refer to http://wiki.freebsd.org/FreeBSDMarvell Obtained from: Marvell, Semihalf
2008-10-14 08:18:27 +00:00
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions
Add kernel config files for Marvell development boards. FreeBSD 8-CURRENT was tested and run successfully on the following eval boards and devices : * DB-88F5182, DB-88F5281 (Orion based) * DB-88F6281, RD-88F6281 (Kirkwood based) * DB-78100 (Discovery based) For more detailed info on build instructions and other examples please refer to http://wiki.freebsd.org/FreeBSDMarvell Obtained from: Marvell, Semihalf
2008-10-14 08:18:27 +00:00
options MUTEX_NOINLINE
- Use "device\t" and "options \t" for consistency.
2009-05-10 00:00:25 +00:00
options RWLOCK_NOINLINE
Add kernel config files for Marvell development boards. FreeBSD 8-CURRENT was tested and run successfully on the following eval boards and devices : * DB-88F5182, DB-88F5281 (Orion based) * DB-88F6281, RD-88F6281 (Kirkwood based) * DB-78100 (Discovery based) For more detailed info on build instructions and other examples please refer to http://wiki.freebsd.org/FreeBSDMarvell Obtained from: Marvell, Semihalf
2008-10-14 08:18:27 +00:00
options NO_FFS_SNAPSHOT
options NO_SWAPPING
Enable PCI in Marvell kernel configs.
2008-11-19 11:47:23 +00:00
device pci
Add kernel config files for Marvell development boards. FreeBSD 8-CURRENT was tested and run successfully on the following eval boards and devices : * DB-88F5182, DB-88F5281 (Orion based) * DB-88F6281, RD-88F6281 (Kirkwood based) * DB-78100 (Discovery based) For more detailed info on build instructions and other examples please refer to http://wiki.freebsd.org/FreeBSDMarvell Obtained from: Marvell, Semihalf
2008-10-14 08:18:27 +00:00
# Pseudo devices
device loop
device md
device random
# Serial ports
device uart
# Networking
device ether
device mge # Marvell Gigabit Ethernet controller
device mii
Add etherswitch support to mge This commit introduces support for etherswitch devices that utilize SMI as a way of accessing its registers. SMI register is located in address space of mge -- access to it was exported through MDIO interface. Attachment functions were enhanced so as to ensure proper initialisation in both cases: 1) PHYs attached directly to mge, 2) PHYs attached to switch device and switch attached to mge. Attachment of etherswitch device depends on dts entry with compatible="mrvl,sw" property. If none is found, typical PHY attachment procedure follows. In case of switch attached, PHYs' status and configuration is accessible via etherswitchcfg, and ifconfig shows always-up, non-configurable mge interfaces. Due to the fact that there may be simultaneous accessess to SMI registers (e.g. from PHY attached to one of mge instances and switch to the other), SMI access interlock was added. It is SX lock, because sleep ability is necessary -- busy-waiting would result in poor performance due to long delays required by hardware. Underlying switch driver is obliged to use sleepable locks as well. Reviewed by: adrian Obtained from: Semihalf Submitted by: Bartosz Szczepanek <bsz@semihalf.com> Differential revision: https://reviews.freebsd.org/D3900
2015-10-25 22:00:56 +00:00
device mdio
Add kernel config files for Marvell development boards. FreeBSD 8-CURRENT was tested and run successfully on the following eval boards and devices : * DB-88F5182, DB-88F5281 (Orion based) * DB-88F6281, RD-88F6281 (Kirkwood based) * DB-78100 (Discovery based) For more detailed info on build instructions and other examples please refer to http://wiki.freebsd.org/FreeBSDMarvell Obtained from: Marvell, Semihalf
2008-10-14 08:18:27 +00:00
device e1000phy
device bpf
# USB
device usb
device ehci
device umass
device scbus
device pass
device da
# I2C (TWSI)
device iic
device iicbus
Create the twsi device option in preparation to move the driver to a common location. The device is also found in Allwinner SoCs. Sponsored by: ABT Systems Ltd
2016-02-14 23:42:07 +00:00
device twsi
Add kernel config files for Marvell development boards. FreeBSD 8-CURRENT was tested and run successfully on the following eval boards and devices : * DB-88F5182, DB-88F5281 (Orion based) * DB-88F6281, RD-88F6281 (Kirkwood based) * DB-78100 (Discovery based) For more detailed info on build instructions and other examples please refer to http://wiki.freebsd.org/FreeBSDMarvell Obtained from: Marvell, Semihalf
2008-10-14 08:18:27 +00:00
device ds133x
Introduce ata(4) support for Marvell integrated SATA controllers (found on 88F5xxx, 88F6xxx and MV78xxx system on chip devices). Reviewed by: stas Obtained from: Semihalf
2009-06-24 15:41:18 +00:00
# SATA
Switch the GENERIC kernels for all architectures to the new CAM-based ATA stack. It means that all legacy ATA drivers are disabled and replaced by respective CAM drivers. If you are using ATA device names in /etc/fstab or other places, make sure to update them respectively (adX -> adaY, acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential numbers for each type in order of detection, unless configured otherwise with tunables, see cam(4)). ataraid(4) functionality is now supported by the RAID GEOM class. To use it you can load geom_raid kernel module and use graid(8) tool for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
device mvs
Convert Marvell ARM platforms to FDT convention. The following systems are involved: - DB-88F5182 - DB-88F5281 - DB-88F6281 - DB-78100 - SheevaPlug This overhaul covers the following major changes: - All integrated peripherals drivers for Marvell ARM SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - Since the common FDT infrastrucutre (fdtbus, simplebus) is used we say good by to obio / mbus drivers and numerous hard-coded config data. Note that world needs to be built WITH_FDT for the affected platforms. Reviewed by: imp Sponsored by: The FreeBSD Foundation.
2010-06-13 13:28:53 +00:00
Add architecture dependent code to support NAND Framework on Marvell SoCs. Obtained from: Semihalf Supported by: FreeBSD Foundation, Juniper Networks
2012-05-18 14:41:14 +00:00
# NAND
device nand
Mark gpio as "optional" in files.mv and edit Marvell's kernconfs Including arm/mv/gpio.c now depends on 'gpio' device. 'device gpio' was added to all kernconf files of Marvell boards, except ARMADAXP (dummy mv_gpio_res definition was removed) and ARMADA38X (not supported yet). This commit allows to use generic files.mv on A38X. Reviewed by: andrew Obtained from: Semihalf Sponsored by: Stormshield Submitted by: Bartosz Szczepanek <bsz@semihalf.com> Differential revision: https://reviews.freebsd.org/D4372
2016-01-20 11:57:11 +00:00
# GPIO
device gpio
Convert Marvell ARM platforms to FDT convention. The following systems are involved: - DB-88F5182 - DB-88F5281 - DB-88F6281 - DB-78100 - SheevaPlug This overhaul covers the following major changes: - All integrated peripherals drivers for Marvell ARM SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - Since the common FDT infrastrucutre (fdtbus, simplebus) is used we say good by to obio / mbus drivers and numerous hard-coded config data. Note that world needs to be built WITH_FDT for the affected platforms. Reviewed by: imp Sponsored by: The FreeBSD Foundation.
2010-06-13 13:28:53 +00:00
# Flattened Device Tree
options FDT
Add architecture dependent code to support NAND Framework on Marvell SoCs. Obtained from: Semihalf Supported by: FreeBSD Foundation, Juniper Networks
2012-05-18 14:41:14 +00:00
options FDT_DTB_STATIC
Convert Marvell ARM platforms to FDT convention. The following systems are involved: - DB-88F5182 - DB-88F5281 - DB-88F6281 - DB-78100 - SheevaPlug This overhaul covers the following major changes: - All integrated peripherals drivers for Marvell ARM SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - Since the common FDT infrastrucutre (fdtbus, simplebus) is used we say good by to obio / mbus drivers and numerous hard-coded config data. Note that world needs to be built WITH_FDT for the affected platforms. Reviewed by: imp Sponsored by: The FreeBSD Foundation.
2010-06-13 13:28:53 +00:00
makeoptions FDT_DTS_FILE=db78100.dts
Reference in New Issue Copy Permalink