freebsd-skq/share/man/man4/aha.4

.\"
.\" Copyright (c) 1994 Wilko Bulte
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. The name of the author may not be used to endorse or promote products
.\"    derived from this software without specific prior written permission
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd October 15, 1998
.Dt AHA 4
.Os
.Sh NAME
.Nm aha
.Nd Adaptec SCSI host adapter driver
.Sh SYNOPSIS
.Cd device aha
.Cd device scbus
.Pp
In
.Pa /boot/device.hints :
.Cd hint.aha.0.at="isa"
.Sh DESCRIPTION
This driver provides access to the
.Tn SCSI
bus connected to an Adaptec 154xA, 154xB, 154xC, 154xCF, or 154xCP
host adapter.  Host adapters supporting a 154X compatible interface,
such as some Tekram controllers and the Adaptec 174x in 154x
emulation mode can, also be attached with this driver.  For optimum
performance, Adaptec 174x controllers should be configured in
enhanced mode and attached via the
.Xr ahb 4
driver.
.Pp
One kernel config entry for every card to be attached by the system is
required.  Specific values for the port address, irq, and drq may be
specified.  If wildcard values are used, the driver will query the
device for its current settings and use those.  If the port address
is a wildcard, the driver consults an internal table of possible port address
locations and attaches to the first unattached card it finds.  The possible
port addresses for this card are 0x330, 0x334, 0x230, 0x234, 0x130, and
0x134.
.Sh SEE ALSO
.Xr ahb 4 ,
.Xr ahc 4 ,
.Xr cd 4 ,
.Xr da 4 ,
.Xr sa 4 ,
.Xr scsi 4
.\"
.\" .Sh DIAGNOSTICS
.\"
.Sh AUTHORS
.An -nosplit
The
.Nm
driver was ported by
.An M. Warner Losh
from the
.Nm bt
driver written by
.An Justin T. Gibbs .
Add new files from Wilko (and in their proper place). Submitted by: Wilko Bulte 1994-09-29 13:54:36 +00:00			`.\"`
			`.\" Copyright (c) 1994 Wilko Bulte`
			`.\" All rights reserved.`
			`.\"`
			`.\" Redistribution and use in source and binary forms, with or without`
			`.\" modification, are permitted provided that the following conditions`
			`.\" are met:`
			`.\" 1. Redistributions of source code must retain the above copyright`
			`.\" notice, this list of conditions and the following disclaimer.`
			`.\" 2. Redistributions in binary form must reproduce the above copyright`
			`.\" notice, this list of conditions and the following disclaimer in the`
			`.\" documentation and/or other materials provided with the distribution.`
			`.\" 3. The name of the author may not be used to endorse or promote products`
Spelling police: withough -> without Submitted by: Joseph Mallett <jmallett@xMach.org> 2001-08-23 21:36:18 +00:00			`.\" derived from this software without specific prior written permission`
Add new files from Wilko (and in their proper place). Submitted by: Wilko Bulte 1994-09-29 13:54:36 +00:00			`.\"`
			.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
			`.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES`
			`.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.`
			`.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,`
			`.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT`
			`.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,`
			`.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY`
			`.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT`
			`.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF`
			`.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.`
			`.\"`
$Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00			`.\" $FreeBSD$`
Add new files from Wilko (and in their proper place). Submitted by: Wilko Bulte 1994-09-29 13:54:36 +00:00			`.\"`
Update the aha(4) and ahb(4) man pages for CAM. Reviewed by: ken Submitted by: gibbs 1998-10-16 04:41:38 +00:00			`.Dd October 15, 1998`
Remove the MD part from the document title. Forgotten by: obrien 2001-02-20 11:07:27 +00:00			`.Dt AHA 4`
mdoc(7) police: removed HISTORY info from the .Os call. 2001-07-10 15:31:11 +00:00			`.Os`
Add new files from Wilko (and in their proper place). Submitted by: Wilko Bulte 1994-09-29 13:54:36 +00:00			`.Sh NAME`
			`.Nm aha`
More man page cleanups. 1996-01-19 22:17:57 +00:00			`.Nd Adaptec SCSI host adapter driver`
Add new files from Wilko (and in their proper place). Submitted by: Wilko Bulte 1994-09-29 13:54:36 +00:00			`.Sh SYNOPSIS`
Update man pages in the section 4 to match the reality in -CURRENT. - Change lines referring to kernel configuration file: device foo0 at isa port xxx irq yyy... to device foo Describe resource "hints" in /boot/device.hints. - Try to describe resource allocation and probe/attach behavior in the newbus framework. 2001-10-13 09:08:37 +00:00			`.Cd device aha`
			`.Cd device scbus`
			`.Pp`
			`In`
			`.Pa /boot/device.hints :`
			`.Cd hint.aha.0.at="isa"`
Add new files from Wilko (and in their proper place). Submitted by: Wilko Bulte 1994-09-29 13:54:36 +00:00			`.Sh DESCRIPTION`
More man page cleanups. 1996-01-19 22:17:57 +00:00			`This driver provides access to the`
			`.Tn SCSI`
Update the aha(4) and ahb(4) man pages for CAM. Reviewed by: ken Submitted by: gibbs 1998-10-16 04:41:38 +00:00			`bus connected to an Adaptec 154xA, 154xB, 154xC, 154xCF, or 154xCP`
			`host adapter. Host adapters supporting a 154X compatible interface,`
			`such as some Tekram controllers and the Adaptec 174x in 154x`
			`emulation mode can, also be attached with this driver. For optimum`
			`performance, Adaptec 174x controllers should be configured in`
			`enhanced mode and attached via the`
Add new files from Wilko (and in their proper place). Submitted by: Wilko Bulte 1994-09-29 13:54:36 +00:00			`.Xr ahb 4`
Update the aha(4) and ahb(4) man pages for CAM. Reviewed by: ken Submitted by: gibbs 1998-10-16 04:41:38 +00:00			`driver.`
			`.Pp`
			`One kernel config entry for every card to be attached by the system is`
			`required. Specific values for the port address, irq, and drq may be`
			`specified. If wildcard values are used, the driver will query the`
			`device for its current settings and use those. If the port address`
			`is a wildcard, the driver consults an internal table of possible port address`
			`locations and attaches to the first unattached card it finds. The possible`
Removed whitespace at end-of-line; no content changes. I simply did cd src/share; find man[1-9] -type f\|xargs perl -pi -e 's/[ \t]+$//' BTW, what editors are the culprits? I'm using vim and it shows me whitespace at EOL in troff files with a thick blue block... Reviewed by: Silence from cvs diff -b MFC after: 7 days 2001-07-14 19:41:16 +00:00			`port addresses for this card are 0x330, 0x334, 0x230, 0x234, 0x130, and`
Update the aha(4) and ahb(4) man pages for CAM. Reviewed by: ken Submitted by: gibbs 1998-10-16 04:41:38 +00:00			`0x134.`
More man page cleanups. 1996-01-19 22:17:57 +00:00			`.Sh SEE ALSO`
			`.Xr ahb 4 ,`
			`.Xr ahc 4 ,`
			`.Xr cd 4 ,`
Update the aha(4) and ahb(4) man pages for CAM. Reviewed by: ken Submitted by: gibbs 1998-10-16 04:41:38 +00:00			`.Xr da 4 ,`
Various man page cleanup: - Sort xrefs - FreeBSD.ORG -> FreeBSD.org - Be consistent with section names as outlined in mdoc(7). - Other misc mdoc cleanup. PR: doc/13144 Submitted by: Alexey M. Zelkin <phantom@cris.net> 1999-08-15 10:48:36 +00:00			`.Xr sa 4 ,`
			`.Xr scsi 4`
More man page cleanups. 1996-01-19 22:17:57 +00:00			`.\"`
			`.\" .Sh DIAGNOSTICS`
			`.\"`
Various man page cleanup: - Sort xrefs - FreeBSD.ORG -> FreeBSD.org - Be consistent with section names as outlined in mdoc(7). - Other misc mdoc cleanup. PR: doc/13144 Submitted by: Alexey M. Zelkin <phantom@cris.net> 1999-08-15 10:48:36 +00:00			`.Sh AUTHORS`
mdoc(7) police: do not split author names in the AUTHORS section. 2000-11-22 09:35:58 +00:00			`.An -nosplit`
More man page cleanups. 1996-01-19 22:17:57 +00:00			`The`
			`.Nm`
Various man page cleanup: - Sort xrefs - FreeBSD.ORG -> FreeBSD.org - Be consistent with section names as outlined in mdoc(7). - Other misc mdoc cleanup. PR: doc/13144 Submitted by: Alexey M. Zelkin <phantom@cris.net> 1999-08-15 10:48:36 +00:00			`driver was ported by`
			`.An M. Warner Losh`
			`from the`
Update the aha(4) and ahb(4) man pages for CAM. Reviewed by: ken Submitted by: gibbs 1998-10-16 04:41:38 +00:00			`.Nm bt`
Various man page cleanup: - Sort xrefs - FreeBSD.ORG -> FreeBSD.org - Be consistent with section names as outlined in mdoc(7). - Other misc mdoc cleanup. PR: doc/13144 Submitted by: Alexey M. Zelkin <phantom@cris.net> 1999-08-15 10:48:36 +00:00			`driver written by`
mdoc(7) police: do not split author names in the AUTHORS section. 2000-11-22 09:35:58 +00:00			`.An Justin T. Gibbs .`